diff --git a/.claude/skills/orca-profiles/SKILL.md b/.claude/skills/orca-profiles/SKILL.md
new file mode 100644
index 0000000000..692e529074
--- /dev/null
+++ b/.claude/skills/orca-profiles/SKILL.md
@@ -0,0 +1,117 @@
+---
+name: orca-profiles
+description: Use when creating, modifying, reviewing or debugging OrcaSlicer FFF system profiles under resources/profiles, including printer/vendor/nozzle/material additions, bundle indexes and versions, preset renames, setting_id and filament_id. Also use for missing presets or vendors, ignored profile settings, ambiguous AMS filament matches, and failures from orca_profile_tool.py, check_profile.sh/.bat, OrcaSlicer_profile_validator or the Check profiles CI job.
+---
+
+# OrcaSlicer system profiles
+
+A bundle is `resources/profiles/<Vendor>.json` plus `<Vendor>/`. The vendor id is the
+filename stem, not the index's display `name`. The index is the loader's only entry point:
+unindexed presets never load. `OrcaFilamentLibrary` is the shared filament bundle;
+`blacklist.json` is data, not a bundle.
+
+## Choose the reference for the task
+
+Read the relevant reference before editing; load others only when the task crosses those areas.
+Paths below are relative to this skill. Commands run from the repository root.
+
+| Task | Read |
+| --- | --- |
+| Add or tune a filament, brand or material; fix compatibility / alias shadowing | [filament-profiles.md](references/filament-profiles.md) |
+| Add a printer or nozzle; change models, variants, assets or extruder vectors | [machine-profiles.md](references/machine-profiles.md) |
+| Add a quality tier or tune a process | [process-profiles.md](references/process-profiles.md) |
+| Create a vendor bundle; diagnose loading or inheritance; migrate preset names | [vendor-bundle.md](references/vendor-bundle.md) |
+| Change ids; diagnose AMS identity | [ids.md](references/ids.md), then `docs/HLSD/filament_id.md` for identity changes |
+| Review a profile diff | [review-checklist.md](references/review-checklist.md) |
+| Run checks, interpret failures, test another tree or verify in the app | [validation.md](references/validation.md) |
+
+## Golden rules
+
+1. **Bump every changed bundle's `version`**, including `OrcaFilamentLibrary.json` when affected.
+   Increment the last component; carry `.99` into the third component (`02.04.00.99` →
+   `02.04.01.00`). The updater requires a strictly newer version. CI does not check this.
+2. **Register every preset, bases included, parents before children.** `update-index` generates
+   the four `*_list` arrays; `check` requires its output. Index names must equal file `name` fields.
+3. **Generate ids; never invent or copy them.** Keep existing ids during ordinary tuning. New
+   presets normally omit them until `generate-id`; bases must have no `setting_id`.
+   BBL's authoritative `setting_id` and a wrongly inherited `filament_id` need the explicit
+   handling in [ids.md](references/ids.md).
+4. **Load failures can discard a whole vendor bundle.** Broken `inherits`, missing indexed files,
+   duplicate names, invalid model/variant references and unresolved filament ids affect more than
+   the edited preset. Inheritance stays within a bundle, except filaments may inherit the library.
+5. **Preserve shipped selectable names.** Renaming, deleting or changing `instantiation` from
+   `"true"` to `"false"` needs `renamed_from` on a selectable successor. It is a `;`-separated string;
+   update in-tree references too. See [migration rules](references/vendor-bundle.md#renamed_from).
+6. **Compatibility uses exact printer variant names.** Every instantiated non-library filament
+   needs a non-empty `compatible_printers` in its own file. Library fallbacks may omit it;
+   library printer-specific tunes use a non-empty list. Keep same-product tunes disjoint.
+7. **Preset values are strings or arrays of strings.** Use `"instantiation": "false"`, not `false`.
+   Model `nozzle_diameter` is a `;`-separated string; machine `nozzle_diameter` is an array.
+   Wrong types can abort loading; see [failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius).
+8. **Verify setting keys against the code.** Unknown keys are silently discarded. Check
+   `PrintConfig.cpp` definitions and `PrintConfigDef::handle_legacy`; neighbours can contain dead
+   keys. `normalize` removes known obsolete keys, but does not detect arbitrary misspellings.
+9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a
+   development loop. Review also covers version bumps, assets, non-default processes and hardware
+   tuning that CI cannot establish.
+
+## Creating or modifying a profile
+
+1. **Inspect the diff and neighbouring presets.** Read their `name`, parent chain and children;
+   edits to a base or a leaf with descendants propagate. Match the bundle's structure and write
+   only overrides. New files use tab indentation, LF and a trailing newline; preserve unrelated
+   formatting in existing files. Match filename case exactly and use cross-platform names.
+2. **Author explicit metadata.** Set `type` yourself, especially for `machine` vs `machine_model`.
+   Use `"from": "system"` and string `instantiation` on config presets. Omit ids on new presets
+   unless [ids.md](references/ids.md) requires special handling; retain them on existing ones.
+   Complete compatibility, defaults, assets and any rename migration using the task reference.
+3. **Bump the version**, then run the authoring commands in order for each affected bundle:
+
+   ```bash
+   python3 scripts/orca_profile_tool.py normalize --vendor "<Vendor>"
+   python3 scripts/orca_profile_tool.py update-index --vendor "<Vendor>"
+   python3 scripts/orca_profile_tool.py generate-id --vendor "<Vendor>"
+   python3 scripts/orca_profile_tool.py check
+   ```
+
+   Writing commands support `--dry-run`. Inspect their diffs: `normalize` changes content and can
+   reformat entire files. Stop and resolve command errors before proceeding.
+
+   **Do not use `trim` in this workflow:** it can delete newly authored, unindexed profiles.
+   Do not use `normalize --force` for routine edits.
+4. **Validate:**
+
+   ```bash
+   ./scripts/check_profile.sh --vendor "<Vendor>"   # development loop
+   ./scripts/check_profile.sh                       # full tree before the PR
+   ```
+
+   On Windows use `py -3` instead of `python3`, and `scripts\check_profile.bat -Vendor "<Vendor>"`
+   / `scripts\check_profile.bat`. Logs: `.test/check_profiles/logs/<check>.log`.
+   Id checks remain tree-wide under `--vendor`; filament-only bundles skip the default slice check.
+   See [validation.md](references/validation.md) for flags, coverage and error remedies.
+5. **Verify the changed behavior.** Slice newly added non-default processes explicitly, and
+   [test in the app](references/validation.md#testing-in-the-app) for selection or UI behavior.
+   Report checks actually run, failures/skips and any hardware tuning still unverified.
+
+## Symptom → first reference
+
+| Symptom | Start here |
+| --- | --- |
+| A vendor disappears | Loader log / `validate_system`; [bundle failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius) |
+| A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` |
+| A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility |
+| A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) |
+| A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) |
+| A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) |
+| A check fails | [Error → remedy](references/validation.md#error--remedy) |
+
+## Source of truth
+
+When guidance and behavior disagree, inspect the current checkout:
+`scripts/orca_profile_tool.py` for tooling and flags; `src/libslic3r/Preset*.cpp` for loading and
+compatibility; `src/libslic3r/PrintConfig.cpp` for setting types and legacy handling;
+`src/dev-utils/OrcaSlicer_profile_validator.cpp` and `.github/workflows/check_profiles.yml` for
+validation coverage. `docs/HLSD/filament_id.md` defines filament identity. The
+[profile development guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/how_to_create_profiles.md)
+is a tutorial; confirm loader and CLI details against these sources.
diff --git a/.claude/skills/orca-profiles/references/filament-profiles.md b/.claude/skills/orca-profiles/references/filament-profiles.md
new file mode 100644
index 0000000000..b3f6acd4c4
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/filament-profiles.md
@@ -0,0 +1,207 @@
+# Filament profiles and OrcaFilamentLibrary
+
+`OrcaFilamentLibrary` is the filament-only bundle the loader reads **first**; its config map
+becomes the base bundle, so any vendor may inherit a library preset by name. It is the only cross-bundle
+parent — vendor-to-vendor inheritance always fails.
+
+## Where a filament goes
+
+| Contribution | Location |
+| --- | --- |
+| Generic material for all printers | `OrcaFilamentLibrary/filament/Generic <mat> @System.json` |
+| A brand's product, all printers | `OrcaFilamentLibrary/filament/<Brand>/` |
+| A brand's tune for one printer | `OrcaFilamentLibrary/filament/<Brand>/<PrinterVendor>/` — recommended; `<PrinterVendor>/filament/<Brand>/` also works |
+| A printer vendor's tune of a generic or its own product | `<Vendor>/filament/` |
+
+Both locations for the last-but-one row are supported: `OrcaFilamentLibrary/filament/<Brand>/<PrinterVendor>/<Name>.json`
+(the shape the wiki shows) and `<PrinterVendor>/filament/<Brand>/`. The library path is the one a
+filament vendor should contribute to — `OrcaFilamentLibrary/filament/<Brand>/` is the brand's own
+folder, while a printer vendor's folder belongs to that printer vendor. Brand tunes do ship under
+printer vendors' folders today (Polymaker and SUNLU among others).
+
+Library layout: `filament/base/fdm_filament_*.json` type roots, root-level `Generic <mat> @System.json`
+generics, and one subfolder per brand, which may nest printer-specific tunes one level deeper. Adding
+a brand means adding a folder here; the folder name is a directory label only — `filament_vendor` inside the JSON is the real vendor string.
+
+## The three-part shape
+
+```jsonc
+// Fiberon PA6-CF @base.json  — the product root, holds identity + material values
+{ "type": "filament", "name": "Fiberon PA6-CF @base", "from": "system",
+  "instantiation": "false", "inherits": "fdm_filament_pa",
+  "filament_id": "OFkOviHk",                 // generated here; variants inherit it
+  "filament_vendor": ["Polymaker"], "filament_type": ["PA6-CF"], /* … */ }
+
+// Fiberon PA6-CF @System.json — the selectable shim, 7 keys
+{ "type": "filament", "name": "Fiberon PA6-CF @System", "from": "system",
+  "instantiation": "true", "inherits": "Fiberon PA6-CF @base",
+  "setting_id": "…", "compatible_printers": [] }
+
+// <PrinterVendor>/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json — a printer tune
+{ … "inherits": "Fiberon PA6-CF @base", "filament_max_volumetric_speed": ["14"],
+  "compatible_printers": ["Bambu Lab X1 Carbon 0.4 nozzle", …] }
+```
+
+- `@base` is the convention for a root. A base carries **no** `setting_id`, no `compatible_printers`, no
+  `filament_settings_id`. Only the `setting_id` half is enforced, and nothing violates it; the other two
+  are unchecked and plenty of bases still carry them. Do not copy that from a neighbouring file.
+- Every `@System` must be `"instantiation": "true"`. DREMC ships `@System` presets set to `"false"`,
+  which therefore ship but can never be selected; no check catches it.
+- A duplicated brand `@base` across bundles is normal and intentional (`Fiberon PA6-CF @base` exists in
+  both the library and BBL with the same id, differing only in MVS) — bases never enter the preset
+  collection, so there is no duplicate-name error.
+- You may inherit from an instantiated preset as well as from a base; it is common.
+
+## The two most common contributions
+
+**A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library
+preset on your printers, inherit `Generic X @System`, declare **no** `filament_id` (inheriting the
+library's is correct — the product really is the library's generic), and give it a non-empty
+`compatible_printers` in its own body:
+
+```jsonc
+// <Vendor>/filament/Generic PETG @Acme One 0.4 nozzle.json
+{ "type": "filament", "name": "Generic PETG @Acme One 0.4 nozzle", "from": "system",
+  "instantiation": "true", "inherits": "Generic PETG @System",
+  "filament_flow_ratio": ["0.95"], "filament_max_volumetric_speed": ["10"],
+  "compatible_printers": ["Acme One 0.4 nozzle"] }
+```
+
+**A printer vendor's own branded product.** Give it a `@base` root so `generate-id` can mint the id (see
+[ids.md](ids.md) — inheriting `Generic X @System` directly makes the id unfixable by the tool), then one
+instantiated leaf per printer in the same bundle. No `@System` shim: that is only for a product entering
+OrcaFilamentLibrary.
+
+```jsonc
+// <Vendor>/filament/Acme Aura PETG @base.json      — instantiation false, no setting_id
+{ "type": "filament", "name": "Acme Aura PETG @base", "from": "system",
+  "instantiation": "false", "inherits": "fdm_filament_pet",
+  "filament_vendor": ["Acme"], "filament_type": ["PETG"] }   // filament_id minted here
+
+// <Vendor>/filament/Acme Aura PETG @Acme One 0.4 nozzle.json
+{ "type": "filament", "name": "Acme Aura PETG @Acme One 0.4 nozzle", "from": "system",
+  "instantiation": "true", "inherits": "Acme Aura PETG @base",
+  "filament_max_volumetric_speed": ["11"],
+  "compatible_printers": ["Acme One 0.4 nozzle"] }
+```
+
+Omit `filament_settings_id` from new presets — it is runtime bookkeeping the app rewrites to the preset
+name.
+
+## `compatible_printers`
+
+- **Library fallbacks:** empty `[]` or absent, so they are offered on all printers except where
+  [alias shadowing](#alias-shadowing) supplies a printer-specific tune.
+- **Library printer-specific tunes:** non-empty, listing exact printer **variant** names. These can
+  supersede a same-alias fallback just like a tune in a printer vendor's bundle.
+- **Instantiated filaments in every other vendor:** non-empty, listing exact printer **variant** names.
+  Enforced twice but not identically: the C++ `has_errors` reads the *flattened* config, so an inherited list satisfies it,
+  while the Python check reads the file's **own** key. Write the list in the file itself. This is the
+  most common filament CI failure.
+- Emptying it to "make it apply everywhere" fails that check *and* creates a duplicate-`filament_id`
+  collision against the library generic on every printer.
+- Copying a base's full printer list onto a nozzle-specific variant produces duplicate combobox entries —
+  a real shipped bug twice over.
+
+## Alias shadowing
+
+A printer-specific filament in either the library or a vendor bundle supersedes the library fallback
+on the printers it lists. The matching key is the **alias**: the preset name up to the **first** `@`,
+right-trimmed (no `@` → the whole name). So
+`QIDI ABS-GF@Q2-Series` aliases to `QIDI ABS-GF`.
+
+A library preset with an empty `compatible_printers` collects, into `m_excluded_from`, every printer named
+by any same-alias preset that *has* a non-empty list, and is then hidden on those printers.
+
+Two consequences:
+
+- **Only an unrestricted library fallback can be shadowed.** Two printer-specific presets sharing
+  an alias do not exclude each other — overlapping lists for the same product trip the
+  duplicate-`filament_id` check instead.
+- This is why adding `Generic PLA @<printer>` to a vendor silently removes the library `Generic PLA`
+  from that printer. Intended — and the reason a vendor tuning a generic must **keep the `Generic X`
+  base name**.
+
+The literal spelling `Generic <mat> @System` is load-bearing beyond shadowing: `find_preset2` rewrites an
+unresolved name containing "Generic" into that form and retries against the library, which is how 3MF
+and project recovery works.
+
+## `filament_id`, `filament_vendor`, `filament_type`
+
+`filament_id` is minted from the triple `(filament_vendor, filament_type, name-before-first-@)`.
+`filament_vendor` and `filament_type` are therefore **identity, not decoration** — editing either
+re-mints the id. Read `docs/HLSD/filament_id.md` before changing any of them, and see
+[ids.md](ids.md) for the tooling.
+
+A filament with no resolvable `filament_id` anywhere in its `inherits` chain is a **hard load error** that
+discards the vendor bundle. The id inherits across bundles, so a vendor's `Generic ABS @X` inheriting
+`Generic ABS @System` gets the library's id for free; a vendor's own product must resolve its own.
+
+- `filament_type` **must be a JSON array** — the one vector key the Python check enforces. A scalar
+  `"PP"` once hung the filament/printer selection UI.
+- It is an **open** enum: an unlisted value is accepted silently and falls back to 190–300 °C defaults
+  and adhesion 1.0. Off-list values do ship. Prefer a value from `MaterialType::all()` in
+  `src/libslic3r/MaterialType.cpp`, or add a row there.
+- Generics use `filament_vendor: ["Generic"]`, which `fdm_filament_common` already defaults to.
+
+## `"nil"`
+
+Legal in any key whose `ConfigOptionDef` is `nullable`. In a filament preset that is most of the
+`filament_*` family, plus `long_retractions_when_ec` and `retraction_distances_when_ec`. About half are
+the extruder overrides (`filament_retraction_length`, `filament_z_hop`, `filament_wipe`,
+`filament_retract_*`, `filament_retraction_speed`, `filament_deretraction_speed`,
+`filament_retraction_minimum_travel`, `filament_wipe_distance`, `filament_long_retractions_when_cut`,
+`filament_retraction_distances_when_cut`, …), where `nil` means *keep the printer/extruder's own value*.
+The rest are ordinary nullable options (`filament_flow_ratio`, `filament_flush_temp`,
+`filament_adaptive_volumetric_speed`, …) where it means *unset*.
+
+Anywhere else it throws `Deserializing nil into a non-nullable object`. To not set a non-nullable key,
+omit it — do not write `nil`.
+
+## What to review per nozzle
+
+Across `@X` / `@X 0.N nozzle` sibling pairs the keys that differ, most often first, are
+`filament_max_volumetric_speed`, `filament_retraction_length`, `slow_down_min_speed`,
+`filament_flow_ratio`, `slow_down_layer_time`, `nozzle_temperature` and `pressure_advance`.
+`filament_cost`, `filament_density`, `filament_type` and `filament_vendor` belong on the `@base` and
+should not appear in a printer tune.
+
+Use measured values for the material, hotend, extruder and nozzle combination. Neither maximum
+volumetric speed nor pressure advance has a universal nozzle-only lookup table. When cloning a
+0.4 preset for a 0.2 nozzle, explicitly revisit flow limits; do not infer a pressure-advance value
+or a required direction of change from diameter alone.
+
+## Style
+
+Overrides, not full copies: a typical instantiated filament preset carries around a dozen non-meta keys,
+and a library leaf two or three. Presets that restate fifty-plus keys from their parent do still ship —
+Phrozen's single filament preset is that style — but they are the pattern to move away from, not to
+copy. Commit `6943b6ddc3` is the stated model (flip true bases to `instantiation: "false"`, strip
+`compatible_printers`/`setting_id`/`filament_settings_id`, add `renamed_from` on the survivor).
+
+Prefer the library's `fdm_filament_*` bases over a vendor-local copy. Phrozen's local
+`fdm_filament_common` has drifted from the library's.
+
+Canonical key order, written by `orca_profile_tool.py normalize` when it rewrites a file: `type`, `name`,
+`renamed_from`, `inherits`, `from`, `setting_id`, `filament_id`, `instantiation`, then everything else in
+the order you wrote it. Not enforced — a file that leads with `compatible_printers` passes `check`.
+
+**Every vector-typed (`co*s`) key must be a JSON array.** Only `filament_type` is an outright error, but
+`normalize` silently arrayifies five more (`filament_cost`, `filament_density`,
+`temperature_vitrification`, `filament_max_volumetric_speed`, `filament_vendor`) and `check` fails when
+it would. Every other vector key is on you — including `filament_start_gcode`, `filament_end_gcode`,
+`filament_extruder_variant`, `compatible_printers` and the plate temperatures.
+
+## Bed temperature is twelve keys, not one
+
+There is no single "bed temperature". Which plate key applies depends on `curr_bed_type`, whose six
+selectable values (`btPC`, `btEP`, `btPEI`, `btPTE`, `btPCT`, `btSuperTack`; `btDefault` maps to no key)
+`get_bed_temp_key()` turns into `cool_plate_temp`, `eng_plate_temp`, `hot_plate_temp`,
+`textured_plate_temp`, `textured_cool_plate_temp` and `supertack_plate_temp` — each with an
+`*_initial_layer` twin.
+
+`textured_cool_plate_temp` is the one most often forgotten. A printer with `support_multi_bed_types` off
+hides the selector, and the printer preset's
+`default_bed_type` decides which plate is selected for it, but `curr_bed_type` can still hold a stale
+value carried over from another printer — so set every plate the printer plausibly has, as the sibling
+presets in the bundle do.
diff --git a/.claude/skills/orca-profiles/references/ids.md b/.claude/skills/orca-profiles/references/ids.md
new file mode 100644
index 0000000000..b6a09e9a2f
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/ids.md
@@ -0,0 +1,149 @@
+# `setting_id` and `filament_id`
+
+Orca-generated ids are deterministic hashes of identity. **Never invent an id or copy a sibling's
+`setting_id`.** Use `scripts/orca_profile_tool.py`; the two special cases are
+[a wrongly inherited filament id](#what-generate-id-does-and-does-not-fix) and
+[BBL's authoritative setting ids](#bbls-exception-precisely).
+
+`docs/HLSD/filament_id.md` is the authoritative design document for `filament_id` — the id landscape, the
+checks CI runs, and the Bambu catalog map. This page is the tooling half.
+
+| | `setting_id` | `filament_id` |
+| --- | --- | --- |
+| Identifies | one selectable preset | one filament **product** |
+| Key hashed | `<vendor folder>/<type>/<name>` | `filament_product/<filament_vendor>/<filament_type>/<name-before-@>` |
+| Shape | 16 base62 chars | `OF` + 6 base62 chars |
+| Required on | every `instantiation: "true"` preset | every **instantiated** filament, own or inherited |
+| Forbidden on | bases (`instantiation != "true"`) | — (a base is exactly where it belongs) |
+| Scope | globally unique across the tree | shared by every variant of the product, in every bundle |
+
+`<type>` is `machine` / `process` / `filament` — the vendor is the **folder** name (`BBL`), not the
+display name (`Bambulab`). Renaming a preset changes its `setting_id`; renaming a filament, or editing
+its `filament_vendor` or `filament_type`, also changes its `filament_id`.
+
+## The tool
+
+Use `scripts/orca_profile_tool.py` with a subcommand:
+
+| Command | Does |
+| --- | --- |
+| `check` | everything CI's `profile_tool` step runs — see [validation.md](validation.md) |
+| `generate-id` | writes `setting_id` and `filament_id` |
+| `normalize` | rewrites profile files into their canonical shape |
+| `trim` | deletes profile files no `<vendor>.json` list references |
+| `update-index` | rebuilds the `*_list` sections from the files on disk |
+
+The order after adding, renaming or deleting files — each step feeds the next, so it is not
+interchangeable — is `normalize` → `update-index` → `generate-id` → `check`.
+The [authoring workflow](../SKILL.md#creating-or-modifying-a-profile) has the commands.
+
+> **`trim` deletes.** It removes every profile file the index does not list — including the one you just
+> added and have not registered yet. Register first, or skip `trim` entirely; it is a cleanup sweep, not
+> part of landing a profile. Preview with `--dry-run`.
+
+**Register, then mint.** The `filament_id` pass reads `<Vendor>.json`'s `filament_list`, not the
+filesystem (the `setting_id` pass walks the filesystem, so a bundle whose index has not landed yet is
+still assignable). A new filament file is therefore invisible to `generate-id`'s filament_id pass until
+it is registered — its `setting_id` is written regardless.
+
+- `--dry-run` works on every writing command (`generate-id`, `normalize`, `trim`, `update-index`)
+  and writes nothing.
+- `--filament-id` / `--setting-id` narrow `generate-id`; they exclude each other, and passing neither
+  writes both.
+- `--vendor` is repeatable and narrows **only what is written** — the id is a function of the triple
+  alone, so a narrowed run writes exactly what a full run would. An unknown vendor exits 1 before any
+  write. `--vendor` on `check` narrows the per-vendor checks only; the `setting_id` and `filament_id`
+  passes stay tree-wide.
+- `--profiles DIR` points any command at another tree — see
+  [Checking a copy of the tree](validation.md#checking-a-copy-of-the-tree).
+- `--profile-type` narrows `normalize`, `trim` and `update-index` to `machine_model`, `process`,
+  `filament` or `machine`.
+- Exit codes: 0 clean, 1 errors found (`generate-id` still writes what it could), 2 argparse misuse.
+- Output is ANSI-coloured; searching for the literal `[ERROR]` still works.
+
+`generate-id` is **idempotent and byte-preserving** — BOM and CRLF kept, one key line touched per pass.
+A legitimate `generate-id` diff is one or two changed lines per file: a new instantiated filament gets
+both a `filament_id` and a `setting_id`, and a BBL file with a misspelled `settings_id` has that line
+dropped and its value restored under the right key. `normalize` is the opposite by design — it rewrites
+whole files into canonical shape — which is why `check` demands it already be a no-op. Some bundles have
+CRLF committed (OrcaFilamentLibrary, Anycubic and RH3D among them), so a `normalize` pass there rewrites
+every line — read the diff before committing it.
+
+On a clean tree `check` and `generate-id --dry-run` both exit 0 with zero findings. That is the
+baseline to restore before opening a PR.
+
+## What `generate-id` does and does not fix
+
+Writes:
+
+- a `setting_id` into any instantiated preset that lacks one, or whose value does not match the formula;
+- strips a `setting_id` from a base;
+- deletes the misspelled `settings_id` key;
+- a `filament_id` into the id-less **root(s)** of an instantiated filament that resolves none;
+- rewrites a **declared** `filament_id` that is not the mint of its own triple.
+
+Refuses to write (reports only): a base62 collision between two products, an empty `filament_vendor` or
+`filament_type`, a broken `inherits` chain, roots of one filament resolving divergent `(vendor, type)`
+pairs.
+
+**Does not fix: a preset that *inherits* a wrong `filament_id`.** This is check 2b, and it is the trap
+most likely to bite. It happens when a branded filament inherits a generic for its settings:
+
+```jsonc
+{ "name": "Phrozen Aura PETG @Phrozen Arco 0.4 nozzle",
+  "inherits": "Generic PETG @System" }   // resolves the OFL generic's id — wrong product
+```
+
+The preset resolves *an* id, so `generate-id` neither inserts nor rewrites, and `check` fails with
+`inherits filament_id "X" but its own triple "V/T/N" mints "Y"`.
+
+Two fixes, in order of preference:
+
+1. **Give the product a `@base` root** inheriting a material base (`fdm_filament_pet`,
+   `fdm_filament_pla`, …). No `fdm_filament_*` base carries a `filament_id`, so the filament now resolves
+   none and `generate-id` mints it for you. This is also the shape the rest of the tree uses.
+2. **Declare the tool-computed key on the preset itself.** Use the expected value reported by `check`
+   or compute it with the function below; this is not a manually chosen id. Make sure the preset
+   resolves the right `filament_vendor` and `filament_type` first — with
+   neither set, the triple resolves through the generic parent and the branded product is minted
+   under vendor `Generic`. If you need the id before the file exists:
+
+   ```bash
+   python3 -c "import sys; sys.path.insert(0,'scripts'); from orca_profile_tool import generate_filament_id as g; print(g('Polymaker','PLA','PolyLite PLA'))"
+   # -> OF5CgdDq
+   ```
+
+   The quoting works unchanged in cmd and PowerShell; only swap `python3` for `py -3`.
+
+   The `setting_id` equivalent is `generate_preset_setting_id('<vendor folder>', '<type>', '<name>')`.
+
+## BBL's exception, precisely
+
+`RESERVED_VENDORS = {"BBL"}` covers **`setting_id` assignment only**, keyed on the *folder* name:
+
+- The tool never mints or replaces a BBL `setting_id`. A new instantiated BBL preset with no
+  `setting_id` therefore **cannot be fixed by the tool**, yet the presence rule still applies to it —
+  carry over Bambu's authoritative id by hand.
+- BBL is not exempt from anything else: bases still get their `setting_id` stripped, ids must still be
+  globally unique, and BBL `filament_id`s are minted like everyone else's — every one of them is an
+  `OF*`.
+
+## Ids other systems compose
+
+No id from another system is the mint of a triple, so `check` rejects it like any other bad id — same
+error, same remedy, whoever wrote it. Three such spaces exist near the tree; recognise them so you do
+not copy one into a profile:
+
+- **Bambu's `GF*` catalog** — external and opaque, correlated to Orca's ids by the generated
+  `resources/printers/bambu_filament_ids.json`. `GF` is a *prefix*, not a spelling the tree avoids: most
+  BBL `setting_id`s start with `G`, and `blacklist.json` and
+  `BBL/filament/filaments_color_codes.json` both reference Bambu catalog ids by design. The rule is
+  about `filament_id` and nothing else.
+- **Qidi's `QD_*`** — composed at runtime by the box (`QD_<series>_<vendor>_<typeidx>`), not a preset id.
+- **`P` + 7 hex, and `"null"`** — what `CreatePresetsDialog.cpp` gives a *user*-created filament.
+
+## Tests
+
+`python3 -m unittest discover -s scripts/tests -t scripts` (`py -3 -m …` on Windows). Note the
+`-t scripts` argument; without it the imports fail. CI runs them as the first, non-`continue-on-error`
+step of the profile job — see [validation.md](validation.md#ci).
diff --git a/.claude/skills/orca-profiles/references/machine-profiles.md b/.claude/skills/orca-profiles/references/machine-profiles.md
new file mode 100644
index 0000000000..01071af6b1
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/machine-profiles.md
@@ -0,0 +1,194 @@
+# Printer models and variants
+
+Both live in `resources/profiles/<Vendor>/machine/*.json`; models go in `machine_model_list`, variants
+and shared bases in `machine_list`. Every one of them is registered. Some vendors (Elegoo, Eryone,
+InfiMech, FlyingBear) nest a further subfolder under `machine/`, so recurse rather than globbing
+`machine/*.json`.
+
+## A `machine_model` is not a config preset
+
+It is parsed by a hand-written key switch, and only these keys are stored (`version` and `url` are
+matched and discarded):
+
+`name`, `model_id`, `nozzle_diameter`, `machine_tech`, `family`, `bed_model`, `bed_texture`,
+`hotend_model`, `default_materials`, `not_support_bed_type`, `image_bed_type`,
+`bottom_texture_end_name`, `bottom_texture_rect`, `bottom_texture_rect_longer`, `middle_texture_rect`,
+`use_double_extruder_default_texture`.
+
+**Everything else is silently dropped.** Only `name` and `nozzle_diameter` are required. Dead keys ship
+on real models today — `url`, `default_bed_type`, even a `desciption` typo — so a neighbour carrying a
+key is no evidence it does anything. Printer config options belong on the `machine` preset, never here.
+
+```json
+{
+    "type": "machine_model",
+    "name": "Phrozen Arco",
+    "machine_tech": "FFF",
+    "family": "Phrozen",
+    "model_id": "Phrozen Arco",
+    "nozzle_diameter": "0.4",
+    "bed_model": "Phrozen Arco_buildplate_model.stl",
+    "bed_texture": "Phrozen Arco_buildplate_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Generic PLA @Phrozen Arco 0.4 nozzle"
+}
+```
+
+| Field | Notes |
+| --- | --- |
+| identity | **the `name` of the `machine_model_list` entry**, which is what a variant's `printer_model` must equal. `check_name_consistency` forces it to equal the file's `name`, so they coincide. |
+| `model_id` | a *separate* cloud/device printer type. Optional, and not required to be unique. Not the model's identity. Changing it changes device matching. |
+| `machine_tech` | only `starts_with("SL")` means SLA; everything else is FFF. Write `FFF`; a few models write `FGF`, which is a label with no effect. |
+| `nozzle_diameter` | `;`-separated string, one token per available size. Order is free (Qidi writes `0.4;0.2;0.6;0.8` to put the default first). This list is the authoritative set of legal `printer_variant` values. |
+| `default_materials` | `;`-separated filament **preset names**. Used to preselect in the wizard *and* by `PresetBundle::load_installed_filaments` to auto-install a printer's filaments on first run, so a dangling entry costs a real user a filament. Not `,`; case-sensitive (`@System`). `check` fails on a dangling name here or in `default_filament_profile`. |
+| `family` | a wizard grouping label only; give every model one. |
+
+### Assets
+
+`bed_model`, `bed_texture` and `hotend_model` are paths relative to the **vendor folder** (by id).
+Majority convention: `<Model>_buildplate_model.stl` and `<Model>_buildplate_texture.svg`. An empty string
+is the legal "none", and is the norm for `hotend_model`.
+
+**Nothing checks that the file exists.** A missing `hotend_model` falls back to
+`resources/profiles/hotend.stl`; a missing `bed_model`/`bed_texture` just renders nothing. Broken
+references already ship. Verify by hand.
+
+Every model also has a `<Model>_cover.png` in the vendor folder — treat it as required, not optional.
+240×240 is the cap `scripts/optimize_cover_images.py` enforces and the size most covers already use.
+A missing cover degrades to a placeholder in both the wizard and the sidebar.
+
+## The `machine` variant
+
+```json
+{
+    "type": "machine",
+    "name": "Phrozen Arco 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "setting_id": "lvaYKTUZr5C9jSwk",
+    "instantiation": "true",
+    "printer_model": "Phrozen Arco",
+    "printer_variant": "0.4",
+    "nozzle_diameter": ["0.4"],
+    "default_print_profile": "0.20mm Standard @Phrozen Arco 0.4 nozzle",
+    "default_filament_profile": ["Generic PLA @Phrozen Arco 0.4 nozzle"],
+    "printable_area": ["0x0", "300x0", "300x300", "0x300"],
+    "printable_height": "300"
+}
+```
+
+Minimum viable key set: `type`, `name`, `from`, `instantiation`, `setting_id`, `inherits`,
+`printer_model`, `printer_variant`, `nozzle_diameter`, `printable_area`, `printable_height`,
+`default_print_profile`. The four keys without which the preset will not load at all are `name`,
+`instantiation`, `printer_model` and `printer_variant`; `default_filament_profile` is an array
+(`["Generic PLA @System"]`) and the model's `default_materials` a `;`-separated string. Unlike a
+`machine_model`, a `machine` **is** config-loaded, so a key belonging to another preset type is a
+reported error (a misspelled key is still silent).
+
+### `printer_variant` — three hard rules
+
+1. Non-empty, and an exact member of the model's `;`-separated `nozzle_diameter` list.
+2. `printer_model` non-empty and naming a model of this vendor.
+3. In validation mode, for instantiated presets only: split `printer_variant` on `+`, each token must
+   start with a number (a trailing non-numeric suffix such as `HF` is ignored), and the resulting **set**
+   must equal `set(nozzle_diameter)`.
+
+Rules 1 and 2 are loader-enforced — failing either drops the preset *and* the whole bundle. Rule 3 only
+raises a validation error: the preset still loads, but the validator exits non-zero.
+
+`nozzle_diameter` lists one entry **per physical nozzle**; `printer_variant` lists the **distinct**
+diameters joined with `+`. Snapmaker U1 is the worked case: `["0.4","0.4","0.6","0.6"]` against
+`"0.4+0.6"` — it passes because the comparison is on sets.
+
+The conventional values are `0.2`, `0.25`, `0.4`, `0.5`, `0.6`, `0.8` and `1.0`. Suffixed forms
+(`0.4HF`, `0.6HF`, `0.8HF`, `0.4HS`) are Flashforge-only and the `+` form is rare. A variant is **not**
+required to be unique within a model — Volumic ships `EXO42 IDRE`, `… COPY MODE` and `… MIRROR MODE` all
+at `0.4` under the one model `EXO42 IDRE`.
+
+The converse is **unchecked**: a nozzle size in the model's list with no matching variant is offered in
+the wizard and resolves to nothing. `Wanhao France`'s `D12 500 PRO M2 DIRECT` ships that bug today.
+
+### Other fields worth knowing
+
+- `default_print_profile` is a **scalar**, matched by exact preset name. Not a `;` list. The named
+  process must be compatible with this printer through its resolved list or condition.
+  `validate_slice` attempts to select it and rejects generic Default fallbacks, but compatibility
+  updates can choose another compatible preset. Check the exact default reference yourself.
+- `default_filament_profile` is an **array**, one name per element.
+- `printable_area` is an array of `"XxY"` strings — four points for a rectangle, one per segment for a
+  delta or circular bed.
+- `gcode_flavor` is usually set once in the base; `klipper`, `marlin`, `marlin2` and `reprapfirmware`
+  cover nearly every shipped printer.
+- `printer_settings_id` is junk — most files carrying it disagree with their own name. Do not copy it
+  when cloning a bundle.
+- `min_layer_height` / `max_layer_height` are **machine** keys (per extruder), never process keys.
+
+## Bases
+
+Nearly every machine-bearing vendor registers a base literally named `fdm_machine_common`, and Klipper
+vendors add `fdm_klipper_common` on top of it. Two levels is the usual depth.
+
+**There is no leading-underscore convention for bases.**
+
+## Adding a printer to an existing bundle
+
+1. Choose the names first — model, variant(s), process(es); everything else references them.
+2. Add the model (`machine_model_list`) and one `machine` variant per nozzle; the minimum key sets are
+   above. Bed assets and `<Model>_cover.png` go directly in `<Vendor>/`.
+3. Add at least one process per variant naming it in `compatible_printers`
+   ([process-profiles.md](process-profiles.md#adding-a-quality-tier-or-a-nozzles-processes)).
+4. Register everything (or run `update-index`), bump the version, run the id tool, validate.
+
+## Adding a nozzle variant
+
+1. Extend the model's `nozzle_diameter` (`"0.4"` → `"0.4;0.6"`).
+2. Add the variant preset. Either inherit the shared base (the usual choice) or the 0.4 sibling (Elegoo,
+   BBL, Prusa and Qidi do this — smaller diff, but the sibling's edits now reach this file too).
+3. Override what actually changes with nozzle: `nozzle_diameter`, `printer_variant`,
+   `default_print_profile`, `default_filament_profile`, `min_layer_height`/`max_layer_height`, and
+   retraction if the vendor tunes it.
+4. Add at least one process for the new nozzle — see [process-profiles.md](process-profiles.md).
+5. Register both, bump the version, run the id tool, validate.
+
+## Multi-extruder, IDEX and tool-changers
+
+Per-extruder vectors are **silently resized** to the nozzle count, with no error. Padding repeats the
+**first** value, not the last — `["0.4","0.6"]` on a 4-nozzle machine becomes `0.4, 0.6, 0.4, 0.4`.
+Longer vectors are truncated.
+
+Note the two sizing families: the plain per-extruder keys (`extruder_offset`, `extruder_colour`,
+`extruder_printable_height`, `min_layer_height`, `max_layer_height`, `nozzle_diameter`) are sized to the
+extruder count, while `printer_options_with_variant_1` (`retraction_length`, `z_hop`, `wipe`,
+`nozzle_type`, the rest of the retraction family) is sized to `printer_extruder_variant` instead.
+
+- Give **one entry per extruder** for ordinary per-extruder vectors such as `extruder_offset`,
+  `extruder_colour`, `min_layer_height` and `max_layer_height`; size the variant-dependent family
+  to `printer_extruder_variant` instead.
+  A single `["0x0"]` `extruder_offset` on a dual or multi-tool machine — which already ships — pads every
+  toolhead to the same offset, so the offset never applies.
+- Overriding `nozzle_diameter` to a different count without re-stating every per-extruder vector is the
+  other half of the trap — `Snapmaker U1 (0.4+0.6 nozzle)` inherits 5-entry vectors against 4 nozzles.
+
+Copy targets: `Custom/machine/fdm_toolchanger_common.json` + `Custom/machine/MyToolChanger 0.4
+nozzle.json` (a clean minimal variant on a base that gives every vector five entries), and
+`Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json` for IDEX. The BBL extruder-variant machinery
+(`extruder_variant_list`, `printer_extruder_id`, `default_nozzle_volume_type`) is used by a handful of
+vendors — do not copy it into a new bundle (`nozzle_volume_type` itself is not a machine-preset key).
+
+## Custom G-code
+
+The keys are `machine_start_gcode`, `machine_end_gcode`, `change_filament_gcode`,
+`machine_pause_gcode`, `before_layer_change_gcode` and `layer_change_gcode`. Both a single string with
+embedded `\n` and a JSON array of lines are legal and both are in use — do not convert one into the
+other. Conditionals are `{if …}` / `{elsif …}` / `{else}` / `{endif}`; `{elsif}` is rare but real (Qidi's
+`layer_change_gcode` uses it).
+
+Placeholder errors only surface when the config is actually expanded, which means `validate_slice`:
+
+```bash
+./scripts/check_profile.sh --vendor "<Vendor>" validate_slice
+# Windows:  scripts\check_profile.bat -Vendor "<Vendor>" validate_slice
+```
+
+What the sweep covers is in [validation.md](validation.md#validate_slice); no `CP TOOLCHANGE START` in
+the output means `change_filament_gcode` never expanded.
diff --git a/.claude/skills/orca-profiles/references/process-profiles.md b/.claude/skills/orca-profiles/references/process-profiles.md
new file mode 100644
index 0000000000..98f31bac1a
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/process-profiles.md
@@ -0,0 +1,145 @@
+# Process profiles
+
+Processes live in `resources/profiles/<Vendor>/process/` — selectable leaves and shared bases alike, and
+every one of them is registered in `process_list`. There are no global processes shared across vendors.
+
+## Naming
+
+`"<layer height>mm <quality> @<target>"` — near-universal, so match it.
+
+Follow the bundle's existing quality vocabulary. BBL's common ladder relates the quality word to
+the layer-height / nozzle ratio; it is a naming convention, not a loader constraint:
+
+| Quality | Ratio | 0.2 nozzle | 0.4 | 0.6 | 0.8 |
+| --- | --- | --- | --- | --- | --- |
+| Extra Fine | 0.2× | — | 0.08 | — | — |
+| Fine | 0.3× | 0.06 | 0.12 | 0.18 | 0.24 |
+| Optimal | 0.4× | 0.08 | 0.16 | 0.24 | 0.32 |
+| Standard | 0.5× | 0.10 | 0.20 | 0.30 | 0.40 |
+| Draft | 0.6× | 0.12 | 0.24 | 0.36 | 0.48 |
+| Extra Draft | 0.7× | 0.14 | 0.28 | 0.42 | 0.56 |
+
+This is the `fdm_process_single_<lh>_nozzle_<n>` ladder; 0.4 is commonly the unsuffixed nozzle default.
+Match neighbouring names rather than renaming shipped tiers to fit the table.
+
+The `@target` is a human label, not a reference: most do not equal any real printer variant name.
+Compatibility comes from the resolved list or condition, not this label.
+
+## Shape
+
+A selectable leaf's only truly universal keys are `type`, `setting_id`, `name` and `instantiation`;
+`inherits` and `from` are near-universal — plus compatibility. No slicing key is universal; even
+`layer_height` is more often inherited than restated. A base has `type`, `name`, `instantiation`, almost
+always `from`, and **no** `setting_id`.
+
+**Target shape: a 7-key leaf.** `OrcaArena` is the cleanest model —
+`fdm_process_common` → `fdm_process_arena_common` → `fdm_process_arena_<lh>_nozzle_<n>` → leaf, where the
+leaf carries only `type`, `name`, `inherits`, `from`, `setting_id`, `instantiation`,
+`compatible_printers`, and the per-nozzle base holds the layer height and all eight line widths.
+
+BBL, WonderMaker and Z-Bolt are uniform in *layering* — every leaf inherits a base, names its printers
+directly and holds no layer height of its own — but not in key count. Imitate BBL's layering, not its
+content: its leaves carry doubled `print_extruder_variant` arrays that no single-variant vendor needs.
+
+Nearly every vendor ships its own `fdm_process_common` as the inherits-less root. Those files are not
+identical; copying another vendor's version into a new bundle is normal.
+
+Beware leaf-inherits-leaf: Prusa chains several levels deep through sibling leaves, and Elegoo and
+Flashforge do it too, so editing one selectable process silently changes others. Check a leaf's children
+before editing it.
+
+## Compatibility
+
+Most leaves set `compatible_printers` directly; some inherit it from a base, and Prusa's fall through to
+`compatible_printers_condition`. After resolving `inherits`, **every selectable process has one or the
+other** — that is the invariant to review against. Unlike filaments, inheriting `compatible_printers` is
+legitimate for a process, and no check enforces its presence.
+
+- A non-empty `compatible_printers` makes `compatible_printers_condition` **dead code**. Use one or
+  the other.
+- A condition that fails to parse means *compatible with everything* — a warning, not an error. A typo
+  widens compatibility instead of narrowing it.
+- Matching is `boost::regex` **`regex_match`** — a full-string match, which is why every shipped
+  condition wraps its keyword in `.*`. Because it is boost rather than `std`, `.` also spans the newlines
+  inside `printer_notes`.
+- A `printer_notes` keyword that prefixes another model's keyword matches both. Prusa guards it:
+
+  ```
+  printer_notes=~/.*PRINTER_MODEL_COREONE[^_a-zA-Z0-9].*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/
+  ```
+
+  The `[^_a-zA-Z0-9]` exists because `PRINTER_MODEL_COREONE_L` also contains `PRINTER_MODEL_COREONE`.
+
+`compatible_printers` is almost always one element. A leaf listing a whole model family is where a newly
+added printer is usually forgotten.
+
+## What to review per nozzle
+
+| Key group | Review |
+| --- | --- |
+| `line_width` and per-region widths | resolved widths suit the nozzle and layer height |
+| `layer_height`, `initial_layer_print_height` | within the printer's limits |
+| print speeds | consistent with flow limits and hardware tuning |
+| shell layers, wall loops, accelerations, support Z distances | preserve the intended thickness, motion and support behavior |
+
+**A common starting pattern is nozzle + 0.02 mm**: 0.22 / 0.42 / 0.62 / 0.82 / 1.02. In that pattern, at 0.4,
+`inner_wall_line_width`, `sparse_infill_line_width`, `skin_infill_line_width` and
+`skeleton_infill_line_width` widen to 0.45 and `initial_layer_line_width` to 0.5; at 0.2,
+`initial_layer_line_width` widens to 0.25. Also derived, and easily missed:
+`ironing_inset = line_width / 2` (0.11 / 0.21 / 0.31 / 0.41).
+These are examples, not required values; preserve intentional vendor tuning and percentage/automatic
+widths, and validate their resolved values.
+
+`min_layer_height` and `max_layer_height` are machine keys — no process file sets them.
+
+## Slice-time content checks
+
+`Print::validate()` enforces four rules at slice time:
+
+1. `initial_layer_print_height` ≤ min `nozzle_diameter`
+2. `layer_height` ≤ min `nozzle_diameter` — *"Layer height cannot exceed nozzle diameter."*
+3. `line_width` and the seven per-region widths (inner/outer wall, sparse infill, internal solid infill,
+   top surface, skin, skeleton) > `layer_height` — *"Line width too small"*. `support_line_width` only
+   when the object has support or a raft; `initial_layer_line_width` is never checked.
+4. every width ≤ 5 × max `nozzle_diameter` — *"Line width too large"*
+
+Two further rules cover `bridge_line_width` (≤ nozzle diameter; > `layer_height` unless `thick_bridges`
+and `thick_internal_bridges` are both on). The sweep starts from printer defaults rather than
+enumerating every process. **A new non-default process gets no dedicated slice coverage in CI.**
+
+## What CI checks on a process
+
+Structure, not content: `process_list` name consistency **and** index coverage the other way, two files
+claiming one process name, the `extruder_clearance_radius` / `extruder_clearance_max_radius` conflict
+pair, duplicate JSON keys, a file `normalize` would rewrite, and the five `setting_id` rules (the fifth
+rejects the misspelled key `settings_id`). `compatible_printers` presence is checked for **filaments
+only**.
+
+Note the C++ loader derives a missing `setting_id` on the fly, so the validator will not fail a process
+without one — only `orca_profile_tool.py check` catches it. Running the validator alone gives a false
+all-clear.
+
+## Silent failures specific to processes
+
+- **Unknown or misspelled keys are discarded with no error and no warning.** They ship all over the
+  process tree, both plain typos (`inital_layer_height`, `tree_support_bramch_diameter_angle`,
+  `sparse_infill_patter`) and keys copied from other slicers that Orca never defined.
+- Keys on the tool's `OBSOLETE_KEYS` list (`adaptive_layer_height`, `overhang_totally_speed`, …) are
+  rejected by `check`'s normalization pass across preset types; `normalize` removes them.
+  The additional per-key obsolete warnings read `filament/` only.
+- A dangling `compatible_printers` inside an `instantiation: "false"` base is invisible to
+  `check_preset_references`: a base never becomes a `Preset` at all (its config goes into `config_maps`
+  and the loader returns early), so it is in no collection for the check to walk.
+- Orphan bases that nothing inherits are scattered through the tree — usually the leftover of a
+  half-finished nozzle addition.
+
+## Adding a quality tier or a nozzle's processes
+
+1. Choose the layer height and quality label using the vendor's existing ladder.
+2. If the vendor has per-nozzle bases, add one (`fdm_process_<vendor>_<lh>_nozzle_<n>`) with the layer
+   height, nozzle-appropriate line widths, `initial_layer_print_height` and `ironing_inset`.
+3. Add the leaf: 7 keys, `compatible_printers` naming the exact printer variant(s).
+4. Register both in `process_list`, parent first. Bump the version, run the id tool, validate.
+5. Slice this process explicitly with its intended printer; the sweep gives non-default tiers no
+   dedicated coverage. If it is a printer's `default_print_profile`, verify the exact name and
+   resolved compatibility too — the sweep may fall back or select another compatible process.
diff --git a/.claude/skills/orca-profiles/references/review-checklist.md b/.claude/skills/orca-profiles/references/review-checklist.md
new file mode 100644
index 0000000000..0c4fa7e95a
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/review-checklist.md
@@ -0,0 +1,177 @@
+# Reviewing a profile change
+
+Start with delivery, identity and backward compatibility, then check the affected preset types.
+The table highlights gaps that need human review. What CI *does* run:
+[validation.md](validation.md).
+
+| Not checked by CI | Consequence |
+| --- | --- |
+| The `version` bump | The change never reaches an upgrading user |
+| A misspelled setting key | Setting silently has no effect |
+| A filename Windows cannot check out, or one that differs from its `sub_path` only in case | Works on the author's machine, breaks the bundle on another platform |
+| `bed_model` / `bed_texture` / `hotend_model` pointing at a missing asset | Bed renders as Custom, hotend falls back to the generic model |
+| A nozzle size in a model's list with no matching variant | The size is offered and resolves to nothing |
+| A non-default process | `validate_slice` gives non-default quality tiers no dedicated coverage |
+| Whether the intended default survived compatibility selection | The sweep can select a different compatible preset |
+| A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) |
+| A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
+| Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
+
+## 1. Was the vendor `version` bumped?
+
+For **every** bundle whose folder the diff touches, `resources/profiles/<Vendor>.json` must have its
+`version` incremented — last component, carrying `.99` into the third component. A library change
+means bumping `OrcaFilamentLibrary.json`.
+
+*Why:* nothing in CI checks it, and `PresetUpdater` reinstalls only when `vendor_ver < resource_ver` —
+without a bump the change reaches neither an upgrading user nor the author's own running app.
+
+## 2. Was the index rebuilt, and does the diff contain only this change?
+
+`check` now fails on an unregistered file, on an index `update-index` would reorder, and on a file
+`normalize` would rewrite — so a PR that skipped them arrives red, and you do not have to spot the
+omission yourself. Three things are still yours:
+
+- **The index diff belongs to this change.** `update-index` rewrites whole `*_list` sections. If the
+  bundle had drifted, the author's PR now carries someone else's reordering; ask for it in a separate
+  commit rather than reviewing it inline.
+- **A deleted selectable preset needs a successor** as in item 4. `update-index` removes its
+  registration; `validate_custom` detects the break only for names covered by released fixtures.
+- **`normalize` edits content, not just layout.** It drops `version` and `is_custom_defined` from preset
+  files, removes obsolete keys, deletes six print-speed keys from filament profiles, and resolves
+  `extruder_clearance_radius` against `extruder_clearance_max_radius` by keeping the larger.
+  Check that the keys it removed were meant to go.
+
+Obsolete keys fail `check`'s normalization pass and should be removed with `normalize`.
+`check` also reports per-key obsolete warnings for filament profiles in the selected vendors.
+
+*Why:* the index is the loader's only entry point. Out-of-order entries fail with `can not find inherits`
+and take the whole vendor bundle down; an unindexed file gets reviewed, merged and never loads.
+
+## 3. Are ids generated, not written?
+
+No hand-typed or copied `setting_id` / `filament_id`. Instantiated presets have a `setting_id`; bases do
+not. `check` enforces all of that; what it cannot tell you is whether the identity *should* have moved.
+
+A rewritten or removed `filament_id` means a product's identity moved — a rename, or an edited
+`filament_vendor` / `filament_type` — and the old id is not forwarded anywhere. Confirm that was
+intended, and that a new id is not a rename in disguise.
+
+*Why:* a duplicate `filament_id` on one printer makes AMS spool matching a coin toss; a copied
+`setting_id` breaks preset identity. See [ids.md](ids.md).
+
+## 4. Does anything disappear for existing users?
+
+A rename, a deletion, or a flip of `"instantiation": "true"` → `"false"` on a shipped preset removes the
+name from the preset collection. It needs `renamed_from` on a successor — and only one preset may claim a
+given old name. The claimed old name must **not** still be a live preset; the redirect is inert if it is.
+
+*Why:* user presets inheriting it die with `can not find parent <name> for config <file>!`; 3MF-embedded
+presets are dropped with no error at all. Commit `33923464ae` reverted exactly this for Cubicon;
+`6943b6ddc3` redid it correctly. CI's `validate_custom` catches the shipped-name case — but not an inert
+`renamed_from`.
+
+## 5. Is `compatible_printers` right?
+
+Exact printer **variant** names, non-empty on every instantiated filament outside OrcaFilamentLibrary
+and written in the preset's own file — golden rule 6, with the flattened-vs-own-key trap in
+[filament-profiles.md](filament-profiles.md#compatible_printers). Watch for a nozzle-specific variant that
+inherited or copied the base's full printer list, and for two presets of one product with overlapping
+lists — duplicate combobox entries and an ambiguous AMS match.
+
+*Why:* real shipped bugs twice (`b7b3418baf` "showing up everywhere", `ff83aa41ef` duplicate Flashforge
+entries).
+
+## 6. Model ↔ variant ↔ process consistency
+
+- New nozzle size → the model's `nozzle_diameter` list extended, a variant with a matching
+  `printer_variant`, and at least one process listing that variant.
+- `default_print_profile` is one exact name (not a `;` list), and that process's resolved
+  compatibility list or condition includes this printer.
+- `default_filament_profile` is an array of names that exist.
+
+*Why:* an unlisted `printer_variant` is a hard bundle-load failure. Default process selection is
+weaker: the sweep attempts the named default, then updates compatibility and rejects generic Default
+fallbacks. Another compatible process can conceal a bad reference, so inspect it even after a pass.
+
+## 7. Types and spellings
+
+Every value a string or an array of strings; `filament_type` an array; `instantiation` the string
+`"true"`/`"false"` — golden rule 7. Check index metadata and model `nozzle_diameter` especially;
+wrong types there can abort loading for **every** vendor.
+
+The part only a reviewer can do: check new setting keys against `src/libslic3r/PrintConfig.cpp`. A
+misspelled key is silently discarded (rule 8), the single most common way a profile edit does nothing
+while CI stays green.
+
+## 8. Blast radius of a base edit
+
+A change to `fdm_*_common.json` reaches every child at once. Ask which presets it touches — several
+reverts in this repo are exactly this (`41d1b0d3c8`, `dc491166a8`). Also check whether the edited leaf has
+children of its own: Prusa, Flashforge and Elegoo all chain leaf-inherits-leaf several levels deep.
+
+## 9. Do the numbers make sense for the nozzle?
+
+Check resolved widths and layer heights against the nozzle, and flow limits / pressure advance
+against the actual hardware and material. The patterns in [process-profiles.md](process-profiles.md)
+are examples, not mandatory values; [filament-profiles.md](filament-profiles.md) explains what to
+revisit for a nozzle change. A cloned preset's unchanged MVS needs particular scrutiny.
+
+Settings tuned for real hardware cannot be verified by reading the diff. Say so rather than approving
+numbers nobody measured.
+
+## 10. Asset references (not checked anywhere)
+
+`bed_model`, `bed_texture`, `hotend_model` and `<Model>_cover.png` exist under
+`resources/profiles/<vendor folder>/`. Broken references already ship; nothing checks them.
+
+## 11. `default_materials` (checked by CI)
+
+`check` fails on a `default_materials` / `default_filament_profile` name that resolves to no system
+filament, so a dangling entry no longer reaches review. Scope the run while working on one vendor:
+
+```bash
+python3 scripts/orca_profile_tool.py check --vendor "<Vendor>"   # py -3 on Windows
+```
+
+## 12. Per-extruder vector lengths (not checked)
+
+One entry per extruder for the plain per-extruder vectors; the `printer_options_with_variant_1` keys are
+sized to `printer_extruder_variant` instead. A wrong length is silently padded — repeating the **first**
+value, not the last — or truncated. The two sizing families and the worked cases are in
+[machine-profiles.md](machine-profiles.md#multi-extruder-idex-and-tool-changers).
+
+## 13. Non-default processes get no slice coverage
+
+`validate_slice` starts from printer defaults; it does not enumerate every process. Slice a new or
+changed non-default tier explicitly with its intended printer.
+
+## 14. Housekeeping worth a nit, not a block
+
+`"from"` other than `"system"` (the preset-bundle loader ignores it, though the CLI's config-file loader
+rejects anything but `system`/`user`/`User`), `printer_settings_id` copied from another
+vendor, and a filename that disagrees with the preset's `name` (common; the loader keys off `name`).
+
+## 15. Cross-platform filenames and paths (not checked)
+
+Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
+and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
+
+---
+
+## Reporting the review
+
+A finding is: **one defect**, its file, what breaks at runtime or in CI, and the fix. Split independent
+defects into separate findings even when they live in one file — five id problems in one bullet get one
+fix and four survivors.
+
+Severity discriminates only if it is earned:
+
+| Severity | Means |
+| --- | --- |
+| blocker | the bundle fails to load, or a preset is unreachable at runtime |
+| major | CI fails, or existing users lose a preset |
+| minor | wrong-but-working: dead keys, `from`, naming, redundant overrides |
+
+Compute every number and id (`orca_profile_tool.py`, a scripted count) or omit it — one invented count
+makes a reader stop trusting the right ones. Report a command's result only if you ran it.
diff --git a/.claude/skills/orca-profiles/references/validation.md b/.claude/skills/orca-profiles/references/validation.md
new file mode 100644
index 0000000000..497e1d4e18
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/validation.md
@@ -0,0 +1,255 @@
+# Validating profiles
+
+```bash
+./scripts/check_profile.sh                       # everything CI runs
+./scripts/check_profile.sh --vendor "<Vendor>"   # fast loop
+./scripts/check_profile.sh profile_tool validate_slice   # named checks only
+```
+
+```bat
+scripts\check_profile.bat                        :: the same three, on Windows
+scripts\check_profile.bat -Vendor "<Vendor>"
+scripts\check_profile.bat profile_tool validate_slice
+```
+
+`check_profile.bat` is a shim around `check_profile.ps1` — same checks, same order, same logs;
+the flags take PowerShell spellings (`-Vendor`, `-ProfilesDir`, `-Validator`, `-Download`, `-Refresh`,
+`-WorkDir`, `-LogLevel`) and positional check names are unchanged. `-p`, `-v` and `-l` are aliases, so
+`-v Elegoo -l 2` reads the same on both platforms. It passes `-ExecutionPolicy Bypass` because a
+default Windows client refuses to run a checked-out `.ps1` at all. The `.ps1` finds Python itself,
+probing `py -3`, then `python`, then `python3`; run the tool by hand with `py -3` for the same reason.
+
+Every check in the run happens even after an earlier one fails; the script exits non-zero if any did, and writes
+`.test/check_profiles/logs/<check>.log` plus, on failure, `.test/check_profiles/pr_comment.md` — the same
+report CI posts on the PR. A stale `.test/check_profiles/.lock` after a crash must be removed by hand.
+
+## The five checks
+
+| Check | Command it runs | Catches |
+| --- | --- | --- |
+| `profile_tool` | `python3 scripts/orca_profile_tool.py check` | index coverage **both ways**, preset-name collisions, files `normalize`/`update-index` would still rewrite, duplicate JSON keys, filament `compatible_printers`, `filament_type` array, conflict keys, id length, **all `setting_id` and `filament_id` rules** |
+| `validate_system` | `validator -p resources/profiles -l 2` | load errors, missing filament `compatible_printers`, dangling `inherits`/`compatible_*`, duplicate `filament_id` per printer |
+| `validate_slice` | `validator -p … -s -l 2` | custom G-code expansion, unresolvable printer defaults |
+| `validate_filament_subtypes` | `validator -p … -l 2 -f` | nothing extra — see below |
+| `validate_custom` | `validator -p <tree+fixture> -l 2` | a shipped preset name that a past release offered no longer resolving |
+
+**`-f` is a no-op.** It is declared `po::bool_switch()->default_value(true)`, so the duplicate-`filament_id`
+check runs whether or not you pass it — `validate_system` already fails on duplicates. The binary's own
+`--help` ("Off unless this flag is present") does not reflect that default.
+
+### `validate_custom` — the backward-compatibility gate
+
+Downloads one fixture archive per past release (v1.9.0 onwards) of *generated mock* user presets —
+a `<vendor>_<preset>_orca_test` copy of every system preset that
+release shipped, cut with the validator's own `-g 1` mode — unpacks each over a copy of the current tree
+and loads it. Each entry holds only `inherits` plus a canned diff, so the one failure it adds over
+`validate_system` is a shipped preset name disappearing. (The whole current tree sits under each fixture,
+so every `validate_system` error fails it too.) This is what makes a rename or an
+`instantiation` flip a CI failure rather than just a user complaint, and the reason `renamed_from` is
+mandatory.
+
+### `validate_slice`
+
+Slices a two-colour cube on every instantiable printer in the tree, sequentially, forcing the prime tower.
+It selects `default_print_profile` and the first `default_filament_profile`, then updates compatibility;
+that update can select a different compatible preset. Confirm the intended defaults yourself rather
+than treating a passing sweep as proof that those exact presets were sliced.
+A printer fails if it cannot be selected, falls back to a Default preset, throws, produces no g-code, or
+emits no `CP TOOLCHANGE START`. It cannot be scoped to a filament-only vendor
+(`No instantiable printer presets found for vendor OrcaFilamentLibrary`); `check_profile.sh` records it
+as SKIP for a vendor with no `machine/` folder.
+
+## `orca_profile_tool.py check`
+
+`check` is one subcommand of the tool that also owns
+`generate-id`, `normalize`, `trim` and `update-index`; see [ids.md](ids.md) for the writing half.
+
+| Per vendor | Catches |
+| --- | --- |
+| `check_preset_name_uniqueness` | two files in one bundle claiming one type + name — indexed or not |
+| `check_index_coverage` | a file on disk that no `*_list` references (**an error, not a warning**) |
+| `check_name_consistency` | an index entry whose `name` disagrees with the file, or whose `sub_path` is missing |
+| `check_normalized` | a file `normalize` would rewrite, and an index `update-index` would rebuild |
+| `check_filament_compatible_printers` | an instantiated non-library filament with no `compatible_printers` of its own |
+| `check_conflict_keys` | `extruder_clearance_radius` alongside `extruder_clearance_max_radius` |
+| `check_vector_type_keys` | a vector option written as a scalar (`"filament_type": "PLA"`) |
+| `check_filament_id_length` | a declared `filament_id` longer than 8 characters |
+| `check_machine_default_materials` | every `default_materials` / `default_filament_profile` name resolves |
+| `check_obsolete_keys` | per-key warnings for ignored options; **filament files only** |
+
+Tree-wide, **ignoring `--vendor` entirely**: `check_setting_id_uniqueness` and `check_filament_ids`. So a
+vendor-scoped run can and does fail on another vendor's files — and it saves seconds, not minutes.
+
+Unscoped, the per-vendor pass covers every bundle. The only exclusion is the stray `user/` directory
+(see below); `OrcaFilamentLibrary` is held to the same rules as any vendor, its sole exemption being
+that a library filament may leave `compatible_printers` empty — exactly what
+`check_filament_compatible_printers` allows. `check_normalized` covers every bundle with an index.
+
+Notes that matter:
+
+- Exit codes: **0** clean, **1** errors found, **2** argparse misuse. Warnings never change the exit code.
+- A nonexistent `--vendor` is a hard error — `[ERROR] unknown vendor "<V>" in <dir>`, exit 1.
+- `--vendor ""` means all vendors; `check_profile.sh` relies on that. `--vendor` is repeatable.
+- A **stray directory** under `resources/profiles/` still gets counted as a vendor by the per-vendor pass
+  and warned about (`No profiles found for vendor: <dir> at …/<dir>.json`, and the "Checked vendors" count
+  goes up by one). The one exception is `user/`, the validator's data dir, which an unscoped `check`
+  skips by name; `--vendor user` still checks and warns about it. Warnings never change the exit code.
+  `normalize`, `trim` and `update-index` ignore strays too — they define a bundle as *a directory with a
+  matching index file*.
+- Each remedy is printed once for the whole run, not once per file, as a `[WARNING]` under the errors
+  ("2 unreferenced file(s) above: delete them, or run … update-index"). Read those lines: they name the
+  command that fixes the batch.
+- The trailing summary always suggests `normalize`. That is right for the shape errors and misleading for
+  everything else — an id error needs `generate-id`, a dangling `default_materials` needs a human.
+- `resources/profiles/check_unused_setting_id.py` is a legacy BBL-only diagnostic, not part of
+  profile CI. Use `orca_profile_tool.py check` for current id validation.
+
+### Obsolete-key diagnostics
+
+`check` always reports per-key warnings for obsolete options in filament profiles.
+The normalization check also rejects obsolete keys across preset types; `normalize` removes them.
+
+### Default-material references
+
+The materials check finds `default_materials` / `default_filament_profile` entries naming a preset
+that does not exist. The three authoring errors it surfaces are `,` instead of `;`, wrong case
+(`@system`), and a whole `;`-joined string stuffed into one array element.
+
+### `normalize` and `update-index` are part of the check
+
+`check` fails when either command would still change something, so they are not optional polish — the
+file that gets reviewed has to be the file that ships. What `normalize` changes is narrow and fixed:
+adds a missing `type`, deletes a `version` or `is_custom_defined` key from a *preset* file, deletes six
+print-speed keys from filament profiles (`initial_layer_print_speed`, `outer_wall_speed`,
+`inner_wall_speed`, `infill_speed`, `top_surface_speed`, `travel_speed`), deletes the
+obsolete keys in `PrintConfigDef::handle_legacy`'s `ignore` set across preset types, resolves the
+`extruder_clearance_*` conflict pair by keeping the larger, arrayifies five filament options besides
+`filament_type`, and hoists `type`, `name`, `renamed_from`, `inherits`, `from`, `setting_id`,
+`filament_id`, `instantiation` to the front. A file it changes is then rewritten whole — tab-indented,
+LF, one trailing newline, keys reordered.
+
+**Set `type` explicitly when authoring.** For a file in `machine/` without it, normalization guesses
+`machine` only if its name contains `nozzle`, otherwise `machine_model`. That heuristic cannot
+reliably classify shared machine bases or unusually named variants.
+
+The Python obsolete-key set is checked against the C++ source by a unit test. Active options
+and legacy aliases that the loader migrates (such as `extruder_type` and
+`extruder_clearance_max_radius`) are preserved.
+
+Two things it therefore does **not** enforce:
+
+- **Formatting and key order on their own.** A file with none of those problems is skipped entirely, so
+  4-space indent, a missing trailing newline, and a file that leads with `compatible_printers` all pass
+  `check`. They stay latent until something else trips `normalize` and the whole file reformats inside an
+  unrelated diff. (`normalize --force` rewrites every file, which is not something to run on a shipped
+  bundle.)
+- **A misspelled setting key.** `inital_layer_height` and `sparse_infill_densiti` pass `check` cleanly.
+  Verify new keys against `PrintConfig.cpp` and `PrintConfigDef::handle_legacy`.
+
+## The validator binary
+
+Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` (`-DORCA_TOOLS=ON`).
+Both scripts find a local build under `build*/` — `check_profile.sh` tries Release, RelWithDebInfo, then
+Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into
+`.test/check_profiles/validator`. Pass `--download` / `-Download` to match CI exactly, since a stale
+local build is used silently. Windows looks for `OrcaSlicer_profile_validator.exe`.
+
+If your build lives somewhere else entirely, point at it with `--validator` / `-Validator`, or set
+`ORCA_PROFILE_VALIDATOR` (`$env:ORCA_PROFILE_VALIDATOR` in PowerShell).
+
+| Flag | Meaning |
+| --- | --- |
+| `-p <dir>` | profile tree (also becomes the data dir) |
+| `-l <n>` | log level; CI uses 2 |
+| `-v <Vendor>` | load only that vendor **plus** OrcaFilamentLibrary |
+| `-s` | slice sweep |
+| `-f` | no-op (see above) |
+| `-g 1` | regenerate user-preset fixtures; takes a value, and wipes the user preset dir first |
+
+On ARM64 Linux the nightly is x86-64 only — the script warns and downloads anyway, producing a binary
+that will not run. Build it locally instead.
+
+Running the validator directly uses the profile tree as its data directory and can create `user/`
+there. Prefer the wrappers, which stash existing user presets and restore them afterward. After a
+direct run, inspect `user/` and remove only empty directories created by that run; fixtures or
+pre-existing user files may be present.
+
+## Checking a copy of the tree
+
+Use `--profiles DIR` on the Python tool and `-p DIR` on the validator. The wrappers' `--profiles` /
+`-ProfilesDir` passes the tree to both, so one run validates a copy fully:
+
+```bash
+./scripts/check_profile.sh --profiles "<tree>"
+```
+
+On Windows use `scripts\check_profile.bat -ProfilesDir "<tree>"`.
+
+## Testing in the app
+
+Editing this checkout's `resources/profiles` does not update a separately installed application.
+Test with a build using the edited resources and a bumped bundle version; the updater installs newer
+bundles under `<data_dir>/system/`, and the preset cache also depends on the bundle version.
+Use Help ▸ Show Configuration Folder to locate the active data directory:
+
+| Platform | Default data directory |
+| --- | --- |
+| macOS | `~/Library/Application Support/OrcaSlicer` |
+| Linux | `$XDG_CONFIG_HOME/OrcaSlicer`, or `~/.config/OrcaSlicer` when unset |
+| Windows | `%APPDATA%\OrcaSlicer` |
+
+A portable `data_dir` next to the executable takes precedence. Use a separate test configuration
+for a clean-install check; preserve the normal configuration and user presets.
+
+## Cross-platform paths
+
+Match the exact case of each `sub_path` and asset filename; Linux filesystems commonly distinguish
+case even when a macOS or Windows checkout does not. Preset-name references are case-sensitive
+on every platform. Avoid Windows-invalid characters (`< > : " | ? *`), reserved device names
+such as `CON` / `NUL` (including with extensions), and trailing spaces or dots in path components.
+Keep stems tidy too, but a space immediately before `.json` is not a trailing path-component space.
+
+## Error → remedy
+
+| Message | Fix |
+| --- | --- |
+| `can not find inherits <parent> for <preset>` | parent missing, unregistered, or listed **after** the child |
+| `can not find filament_id for <name>` | nothing in the chain declares one — run `generate-id` |
+| `can not find parent <name> for config <user preset>!` | a shipped name disappeared — add `renamed_from` |
+| `Missing instantiation attribute for <name>` | key absent **or** not the string `"true"`/`"false"` |
+| `contains incorrect keys: <keys>, which were removed` | a key valid for a different preset type |
+| `defines invalid printer variant "<v>"` | not in the model's `nozzle_diameter` list |
+| `has printer_variant "<v>" that does not match its nozzle_diameter` | the set comparison in [machine-profiles.md](machine-profiles.md) |
+| `references unknown compatible_printers "<p>"` | the printer was renamed or deleted; fix the reference |
+| `references renamed compatible_printers "<old>" (now "<new>")` | in-tree references must name the current preset; `renamed_from` does not excuse them |
+| `Filament preset "<f>" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file — the flattened-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) |
+| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint, or fix an `inherits` pointing at another material's `@base` |
+| `Layer height cannot exceed nozzle diameter.` / `Line width too small` | `Print::validate()` flow rules |
+| `[ERROR] … no <V>.json list references it, so it never loads` | `update-index`, or delete the file |
+| `[ERROR] … references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` |
+| `[ERROR] … normalize would <change>` / `<V>.json: update-index would rebuild <lists>` | run that command and commit the result |
+| `[ERROR] <V> has N <type> profiles named "<name>"` | identify the intended preset and remove or rename the duplicate; use `trim --dry-run` only for deliberate unindexed-file cleanup |
+| `[ERROR] … must not have a setting_id` / `is missing a setting_id` | `generate-id --setting-id` |
+| `inherits filament_id "X" but its own triple … mints "Y"` | `generate-id` will **not** fix this — see [ids.md](ids.md) |
+| `vendor <V>'s config version: <s> invalid` | the `version` string is not Semver-parseable |
+| `[json.exception.type_error.302] type must be string` | locate the non-string value in the index or model; see [failure scopes](vendor-bundle.md#failure-modes-ranked-by-blast-radius) |
+| `Printer "<p>" fell back to a default preset` | final process or filament selection is a generic Default preset; check named defaults, visibility and available compatible presets. An incompatible default may instead be replaced without this error |
+| `Printer "<p>" sliced but the filament change never fired` | `change_filament_gcode` never expanded |
+
+## CI
+
+`.github/workflows/check_profiles.yml`, job **"Check profiles"**, on `pull_request` into `main` or
+`release/*`, paths `resources/profiles/**`, `resources/printers/**`, `scripts/**` and the workflow itself.
+There is no push trigger — a direct push to main runs no profile validation.
+
+The job opens with `python3 -m unittest discover -s scripts/tests -t scripts`, the tool's own unit
+tests. That step is deliberately **not** `continue-on-error`: a broken tool makes everything it then says
+about the profiles worthless. Every check after it is `continue-on-error` with a final gate, so one run
+reports all five results. On failure a second workflow posts or replaces a single PR comment marked
+`<!-- profile-validation-comment -->`, with each failing log truncated to 30 KB; it deletes the comment
+once the run is green.
+
+The job name is also the required check for the delegated-merge bot, which lets a vendor maintainer
+self-merge a `resources/profiles/<Their vendor>/` PR with no human review — so whatever CI does not check
+is what ships unreviewed. Its denied patterns refuse `^scripts/` and any `.py`, so a PR that touches the
+tooling always needs a maintainer.
diff --git a/.claude/skills/orca-profiles/references/vendor-bundle.md b/.claude/skills/orca-profiles/references/vendor-bundle.md
new file mode 100644
index 0000000000..29aac13331
--- /dev/null
+++ b/.claude/skills/orca-profiles/references/vendor-bundle.md
@@ -0,0 +1,175 @@
+# The vendor bundle and the loader
+
+A bundle is `resources/profiles/<Vendor>.json` (the index) plus `resources/profiles/<Vendor>/`.
+The **vendor id is the filename stem**, not the `name` inside — several differ (`BBL.json` is named
+"Bambulab"). Asset paths and the `setting_id` formula use the id; the `validate_custom` fixture prefix
+uses the `name`.
+
+## The index
+
+```json
+{
+    "name": "Phrozen",
+    "version": "02.04.00.03",
+    "force_update": "0",
+    "description": "Phrozen configurations",
+    "machine_model_list": [ { "name": "...", "sub_path": "machine/....json" } ],
+    "machine_list":       [ ... ],
+    "process_list":       [ ... ],
+    "filament_list":      [ ... ]
+}
+```
+
+The loader reads `name`, `version`, `url` and the four `*_list` arrays.
+`description` is only logged. `force_update` is read by `PresetUpdater`, never by the loader.
+`sub_path` is relative to the **vendor folder**.
+
+| List | Holds |
+| --- | --- |
+| `machine_model_list` | `machine_model` records (the printer product) |
+| `machine_list` | printer variants **and** shared machine bases |
+| `process_list` | selectable processes **and** shared process bases |
+| `filament_list` | selectable filaments **and** shared filament bases |
+
+### Three registration rules
+
+1. **Everything is registered, bases included.** Every preset file on disk has exactly one entry in the
+   matching list, and no unindexed preset file is left in the tree.
+2. **Parents before children.** `inherits` resolves against a per-kind map filled as the list is walked
+   (`configs.clear()` then process, filaments, printers). A parent listed after its child produces
+   `can not find inherits <parent> for <child>` and the bundle is discarded.
+3. **The index entry's `name` must equal the `name` inside the sub_path file.** `check_name_consistency`
+   walks the index looking for the files; `check_index_coverage` walks the files looking for them in the
+   index. The `renamed_from` escape hatch `check_name_consistency`'s docstring promises is commented out.
+
+All three are `check` errors now, and `update-index` writes an index that satisfies all three from the
+files on disk — including the parents-first ordering, by topological sort. Hand-editing the index is
+fine for a one-line addition, but the committed result must equal what `update-index` writes, because
+`check` compares them.
+
+The loader itself reports none of this: an unregistered file, or an entry with a typo'd key
+(`"subpath"`), is silently dropped. (A typo'd `sub_path` is a `check` error naming the entry.)
+
+`BBL/cli_config.json` and `BBL/filament/filaments_color_codes.json` are auxiliary data loaded by path,
+not presets. The tool's `NON_PROFILE_FILES` excludes these basenames from preset maintenance.
+
+## `version`
+
+Parsed by a four-component Semver where the 4th is folded in as `patch = patch*100 + value`. Write it
+zero-padded, `MM.mm.pp.bb`; a couple of bundles drop a component or the padding, but do not imitate them.
+
+- **Bump the version for every bundle the PR touches.** `PresetUpdater` installs bundled resources
+  only when their version is newer than the installed version; the `.opc` preset cache is also
+  versioned. Nothing in profile CI checks the bump.
+- **Keep the last component ≤ 99.** `02.04.00.100` and `02.04.01.00` both parse to `2.4.100`. A bundle
+  that reaches `.99` carries into the third component (`02.03.02.99` → `02.03.03.00`).
+- An **absent** version is worse than a stale one: the validator still passes, but `Semver::valid()`
+  excludes `0.0.0`, so the vendor is dropped from the configuration wizard entirely and the preset cache
+  is disabled for it. An *unparseable* version is not silent — it throws and discards the whole bundle
+  (see the failure table below).
+
+## Common preset keys
+
+| Key | Value |
+| --- | --- |
+| `type` | `machine_model` / `machine` / `process` / `filament` |
+| `name` | the preset name; the filename is *not* authoritative |
+| `inherits` | the parent's exact `name` — no path, no `.json` |
+| `instantiation` | the **string** `"true"` (selectable) or `"false"` (base) |
+| `from` | `"system"` by convention; the vendor loader never reads it |
+| `setting_id` | required on instantiated presets, forbidden on bases — generated |
+| `renamed_from` | `;`-separated list of old names this preset supersedes |
+
+These are config-preset keys; `machine_model` records have their own
+[schema](machine-profiles.md#a-machine_model-is-not-a-config-preset). Keep `from` as `"system"`
+for shipped presets. The vendor loader ignores it, but the CLI config-file loader accepts only
+`system`, `user` or `User` and handles their inheritance differently.
+
+`instantiation` is the one metadata key that is hard-gated: a missing key or any value other than the
+strings `"true"`/`"false"` is an error (`Missing instantiation attribute for <name>`). A JSON boolean
+`true` fails harder — it throws inside `load_from_json` and takes the **whole vendor bundle** down.
+
+### `inherits`
+
+Resolution is an exact-name lookup **within the same bundle**, plus one exception: filaments may inherit
+from `OrcaFilamentLibrary`, which is loaded first and becomes the base bundle. Vendor-to-vendor
+inheritance always fails. You can inherit from an instantiated preset as well as from a base; it is
+common.
+
+### `renamed_from`
+
+One JSON string, `;`-separated for several old names.
+
+- Write `"A;B"`, never `"A ; B"` — an unquoted item keeps its trailing space and can never match.
+- When `renamed_from` is **absent** and the name contains `@`, the loader auto-adds the `@`-removed form
+  (`X @Y` → `X Y`) as a rename alias. Declaring an explicit `renamed_from` **suppresses** that, so a
+  preset that needs both the `@`-removed form and a real old name must list both. No shipped profile
+  currently does, which means any preset that gained a `renamed_from` quietly lost its `X Y` alias.
+- It rescues names stored **outside** the tree: user presets and 3MF projects. It does **not** rescue
+  in-tree `inherits` (exact lookup), it does **not** satisfy `check_name_consistency`, the validator
+  reports an in-tree reference that only resolves through it (`references renamed compatible_printers
+  "OLD" (now "NEW")`), and `machine_model` records never read it at all.
+- Only one preset may claim a given old name — two that do is a counted error
+  (`… was marked as renamed from "Y" … as well`). But the redirect is **inert while a live preset still
+  carries that name**, and nothing checks *that*; Z-Bolt ships a folder of such dead entries.
+
+## Failure modes, ranked by blast radius
+
+| Scope | Cause |
+| --- | --- |
+| **All vendors, zero system profiles** | a non-string `version`, `name` or `url` at the top level of a vendor index (`"version": 2`), or non-string `nozzle_diameter` on a model — `nlohmann::type_error` escapes the per-vendor `std::runtime_error` catch |
+| **The whole vendor bundle** | unparseable `version`; index JSON parse error; a `sub_path` file missing or unparseable; unresolvable `inherits`; duplicate preset name within the vendor; empty/unknown `printer_model` or `printer_variant`; a filament resolving no `filament_id` |
+| **One preset** | `instantiation` missing or a wrong string; keys belonging to another preset type (`contains incorrect keys: …, which were removed`); a non-string inside a `*_list` entry (`invalid value type for <key>`) |
+| **Logged, not counted** | a raw JSON number in a preset — `invalid json type for <key>`, the value is dropped and the exit code stays 0 |
+| **Nothing reported by the loader** | unregistered file; misspelled setting key; missing bed/hotend asset. Only the first of those is a `check` error; the other two reach users |
+
+Deleting a file the index still lists surfaces as a *parse error* on line 1, not "file not found" — the
+loader `ifstream`s the missing path and nlohmann reports `unexpected end of input`.
+
+Preset names are a **single global namespace across every vendor**: a duplicate within one vendor is a
+hard bundle failure, a duplicate across vendors is reported as `Found duplicated preset: <name> in
+vendor: <vendor>` and still counts as an error. `check_preset_name_uniqueness` catches the within-bundle
+case earlier and more precisely — including an *unindexed* twin, which is one `sub_path` edit away from
+silently becoming the parent every child resolves to (`std::map::emplace` keeps the first insertion, so
+index order decides). Base names, by contrast, repeat across bundles by design: `fdm_process_common`
+exists in nearly all of them.
+
+## Starting a whole new vendor bundle
+
+Nothing generates one; copy the smallest bundle that resembles the hardware. **`Voxelab` or `M3D`** are
+the minimal shape — a shared machine base, the model, one variant, a shared process base, two
+processes, and an empty `filament_list` that takes the library generics. Do *not* start from `Phrozen`:
+it carries local `fdm_filament_*` copies that have drifted from the library, and a filament preset that
+restates most of its parent — the style this skill advises against.
+
+Write the machine files **last**, so you only visit them once:
+
+1. **Choose the names first** — model, variant(s), process(es). Everything else references them.
+2. `resources/profiles/<Vendor>.json`: `name`, `version` (`01.00.00.00`), `force_update: "0"`,
+   `description`, and all four `*_list` arrays (an empty `filament_list` is fine).
+3. The shared bases — `<Vendor>/machine/fdm_machine_common.json` and
+   `<Vendor>/process/fdm_process_common.json`, both `"instantiation": "false"` with no `setting_id`.
+   For a Klipper printer add your own `<Vendor>/machine/fdm_klipper_common.json` inheriting the machine
+   base; there is no shared one, because a `machine` preset can only inherit inside its own bundle.
+4. One selectable process per variant, each naming its variant in `compatible_printers`.
+5. Bed assets and `<Model>_cover.png`, all directly in `<Vendor>/`. None of them is needed for the
+   bundle to load, and nothing in CI checks them — but the bed files are inert unless the `machine_model`
+   names them in `bed_model` / `bed_texture`, and the cover is found by convention as
+   `<the name you gave the model in machine_model_list>_cover.png`.
+6. The `machine_model` record and the `machine` variants, now that every value they reference exists —
+   the minimum key sets and the `default_*` shapes are in
+   [machine-profiles.md](machine-profiles.md#the-machine-variant).
+7. Run the tool and validate — follow
+   [Creating or modifying a profile](../SKILL.md#creating-or-modifying-a-profile). `generate-id` is not
+   optional for a new bundle: the validator loads presets that have no `setting_id`, but `check` fails
+   every one of them. `update-index` will fill the four `*_list` arrays for you once the files exist, so
+   step 2 only needs the bundle metadata to be right.
+
+## `resources/profiles_template/`
+
+A separate tree (`Template.json` + `Template/`) holding filament and process templates. It is **not** a
+scaffold for shipped profiles — `CreatePresetsDialog.cpp` reads it for the in-app "create a custom
+printer/filament" wizard, so editing it changes what users get when they create a custom preset.
+`check_profile.sh`'s validator checks default to `resources/profiles` (redirectable with `-p`), and so
+does `orca_profile_tool.py` (redirectable with `--profiles`);
+neither covers this tree.
diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml
index 63f74a069e..6019c2bc8b 100644
--- a/.github/ISSUE_TEMPLATE/bug_report.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report.yml
@@ -1,5 +1,5 @@
 name: 🐞 Bug Report
-description: File a bug report
+description: Something behaves incorrectly while Orca Slicer keeps running
 labels: ["bug"]
 body:
   - type: markdown
@@ -10,6 +10,8 @@ body:
         Please note that this is not the place to make feature requests or ask for help.
         For this, please use the [Feature request](https://github.com/OrcaSlicer/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=feature_request.yml) issue type or you can discuss your idea on our [Discord server](https://discord.gg/P4VE9UY9gJ) with others.
         
+        If Orca Slicer closes on its own, freezes or stops responding, please use the [Crash report](https://github.com/OrcaSlicer/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=crash_report.yml) form instead. It asks for the logs a crash needs.
+        
         Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment.
   - type: checkboxes
     attributes:
@@ -47,7 +49,7 @@ body:
     id: os_type
     attributes:
       label: "Operating System (OS)"
-      description: "What OSes are you are experiencing issues on?"
+      description: "What OSes are you experiencing issues on?"
       multiple: true
       options:
         - Linux
@@ -86,7 +88,7 @@ body:
     id: reproduce_steps
     attributes:
       label: How to reproduce
-      description: Please described the detailed steps to reproduce this issue
+      description: Please describe the detailed steps to reproduce this issue
       placeholder: |
         1. Go to '...'
         2. Click on '...'
@@ -108,28 +110,23 @@ body:
       description: What should happen after the above steps?
     validations:
       required: true
-  - type: markdown
-    id: file_required
-    attributes:
-      value: |
-        Please be sure to add the following files:
-          * Please upload a ZIP archive containing the **project file** used when the problem arise. Please export it just before or after the problem occurs. Even if you did nothing and/or there is no object, export it! (We need the configurations in project file).
-            You can export the project file from the application menu in `File`->`Save project as...`, then zip it
-          * A **log file** for crashes and similar issues.
-            You can find your log file here:
-            Windows: `%APPDATA%\OrcaSlicer\log` or usually `C:\Users\<your username>\AppData\Roaming\OrcaSlicer\log`
-            MacOS: `$HOME/Library/Application Support/OrcaSlicer/log`
-            Linux: `$HOME/.config/OrcaSlicer/log`
-            If Orca Slicer still starts, you can also reach this directory from the application menu in `Help` -> `Show Configuration Folder`
-            You can zip the log directory, or just select the newest logs when this issue happens, and zip them
   - type: textarea
     id: file_uploads
     attributes:
       label: Project file & Debug log uploads
-      description:  Drop the project file and debug log here
+      description: |
+        Attach the files with the **Paste, drop, or click to add files** control directly underneath this box. Zip anything that is not a `.log`, `.txt` or image, since GitHub rejects other file types, and keep each file under 25 MB.
+
+        * The **project file** used when the problem happened, zipped. Export it just before or after the problem occurs. Even if you did nothing and there is no object on the plate, export it, since we need the configuration it carries. `File` -> `Save project as...`
+        * The **log folder**, zipped. `Help` -> `Show Configuration Folder` opens it, or find it at:
+          * Windows: `%APPDATA%\OrcaSlicer\log`, usually `C:\Users\<you>\AppData\Roaming\OrcaSlicer\log`
+          * macOS: `$HOME/Library/Application Support/OrcaSlicer/log`
+          * Linux: `$HOME/.config/OrcaSlicer/log`
+          * Flatpak: `$HOME/.var/app/com.orcaslicer.OrcaSlicer/config/OrcaSlicer/log`
+          * If the zip comes out over 25 MB, attach the newest logs from that folder on their own instead.
       placeholder: |
-        Project File: `File` -> `Save project as...` then zip it & drop it here
-        Log File:  `Help` -> `Show Configuration Folder`, then zip the log directory, or just select the newest logs in `log` when this issue happens and zip them, then drop the zip file here
+        Zipped project file
+        Zipped log folder
     validations:
       required: true
   - type: checkboxes
@@ -144,7 +141,5 @@ body:
       label: Anything else?
       description: |
         Screenshots? References? Anything that will give us more context about the issue you are encountering!
-
-        Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
     validations:
       required: false
diff --git a/.github/ISSUE_TEMPLATE/crash_report.yml b/.github/ISSUE_TEMPLATE/crash_report.yml
new file mode 100644
index 0000000000..bcbee11d36
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE/crash_report.yml
@@ -0,0 +1,183 @@
+name: 💥 Crash Report
+description: Orca Slicer closes on its own, freezes or stops responding
+labels: ["crash"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        **Thank you for taking the time to report a crash.**
+
+        Use this form when Orca Slicer closes on its own, freezes, or stops responding.
+        If the application stays open and only produces a wrong result, please use the [Bug report](https://github.com/OrcaSlicer/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=bug_report.yml) form instead.
+        A printer whose toolhead collides with the print is also a bug report rather than a crash, since the application itself did not stop.
+
+        Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment.
+  - type: checkboxes
+    attributes:
+      label: Is this crash reproducible in the latest nightly build?
+      description: >
+        Please verify this crash still happens in the latest nightly build first. It may already be fixed there:
+        [Nightly builds](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds).
+      options:
+        - label: I have checked the latest nightly build and the crash is still reproducible
+          required: true
+  - type: checkboxes
+    attributes:
+      label: Is there an existing issue for this crash?
+      description: Please search to see if an issue already exists for the crash you encountered.
+      options:
+        - label: I have searched the existing issues
+          required: true
+  - type: input
+    id: version
+    attributes:
+      label: OrcaSlicer Version
+      description: Which version of Orca Slicer are you running? You can see the full version in `Help` -> `About Orca Slicer`.
+      placeholder: e.g. 2.5.0
+    validations:
+      required: true
+  - type: input
+    id: working_version
+    attributes:
+      label: Regression compared to a previous version
+      description: Did it work in a previous version?
+      placeholder: e.g. 2.3.2
+    validations:
+      required: false
+  - type: dropdown
+    id: os_type
+    attributes:
+      label: "Operating System (OS)"
+      description: "What OSes are you seeing the crash on?"
+      multiple: true
+      options:
+        - Linux
+        - macOS
+        - Windows
+    validations:
+      required: true
+  - type: input
+    id: os_version
+    attributes:
+      label: "OS Version"
+      description: "What OS version does this relate to?"
+      placeholder: "i.e. OS: Windows 7/8/10/11 ..., Ubuntu 22.04/Fedora 36 ..., macOS 10.15/11.1/12.3 ..."
+    validations:
+      required: true
+  - type: input
+    id: printer
+    attributes:
+      label: Printer
+      description: Which printer was selected
+      placeholder: Voron 2.4/VzBot/Prusa MK4/Bambu Lab X1 series/Bambu Lab P1P/...
+    validations:
+      required: true
+  - type: dropdown
+    id: crash_moment
+    attributes:
+      label: When does the crash happen?
+      description: Pick the point where Orca Slicer stops working.
+      options:
+        - Not sure
+        - On startup, before the main window appears
+        - When opening or importing a project or model
+        - While changing printer, filament or process settings
+        - While slicing
+        - In the 3D view, Preview or Assembly view
+        - When exporting G-code or sending a print to the printer
+        - On the Device tab, or connecting to a printer (camera, sync, login)
+        - While using a specific tool, dialog or calibration
+        - After resuming from sleep or changing monitors
+        - When closing the application
+        - No clear pattern
+    validations:
+      required: true
+  - type: dropdown
+    id: crash_frequency
+    attributes:
+      label: How often does it happen?
+      options:
+        - Not sure
+        - Every time
+        - Often, but not every time
+        - Rarely
+        - It only happened once
+    validations:
+      required: true
+  - type: dropdown
+    id: fresh_config
+    attributes:
+      label: Does it still crash with a fresh configuration?
+      description: >
+        Close Orca Slicer and rename your configuration folder (`%APPDATA%\OrcaSlicer` on Windows,
+        `$HOME/Library/Application Support/OrcaSlicer` on macOS, `$HOME/.config/OrcaSlicer` on Linux),
+        then start it again. Renaming keeps your settings, so you can put the folder back afterwards.
+      options:
+        - I have not tried this
+        - Yes, it still crashes
+        - No, the crash goes away
+    validations:
+      required: true
+  - type: textarea
+    id: reproduce_steps
+    attributes:
+      label: How to reproduce
+      description: Please describe the detailed steps that lead to the crash.
+      placeholder: |
+        1. Go to '...'
+        2. Click on '...'
+        3. Scroll down to '...'
+        4. Orca Slicer closes
+    validations:
+      required: true
+  - type: textarea
+    id: system_info
+    attributes:
+      label: Additional system information
+      description: >
+        Display card and driver version are worth adding for crashes on startup or in the 3D view.
+        CPU and memory are worth adding for crashes while slicing.
+      placeholder: |
+        CPU: 11th gen Intel r core tm i7-1185g7/AMD Ryzen 7 6800h/...
+        Memory: 32/16 GB...
+        Display Card: NVIDIA Quadro P400/...
+    validations:
+      required: false
+  - type: textarea
+    id: file_uploads
+    attributes:
+      label: Project file, logs and crash report uploads
+      description: |
+        A crash report without logs usually cannot be acted on. Attach the files with the **Paste, drop, or click to add files** control directly underneath this box. Zip anything that is not a `.log`, `.txt` or image, since GitHub rejects other file types, and keep each file under 25 MB.
+
+        * The **project file** used when the crash happened, zipped. Export it just before or after the crash, even if the plate is empty, since we need the configuration it carries. `File` -> `Save project as...`
+        * The whole **log folder**, zipped rather than single files picked out of it. `Help` -> `Show Configuration Folder` opens it, or find it at:
+          * Windows: `%APPDATA%\OrcaSlicer\log`, usually `C:\Users\<you>\AppData\Roaming\OrcaSlicer\log`
+          * macOS: `$HOME/Library/Application Support/OrcaSlicer/log`
+          * Linux: `$HOME/.config/OrcaSlicer/log`
+          * Flatpak: `$HOME/.var/app/com.orcaslicer.OrcaSlicer/config/OrcaSlicer/log`
+          * On Windows the crash itself is written to a separate `crash_*.log` in there, and that is the file we need most. If the zip comes out over 25 MB GitHub will refuse it, so attach the newest log and any `crash_*.log` on their own instead.
+        * The **operating system crash report**, on macOS and Linux, where Orca Slicer cannot write its own crash log. It is often the only record of where it died:
+          * macOS: Console.app -> Crash Reports, or `$HOME/Library/Logs/DiagnosticReports/`. The file starts with `OrcaSlicer` and ends in `.ips`. Zip it before attaching, GitHub does not accept `.ips` files.
+          * Linux: run `orca-slicer` from a terminal (Flatpak: `flatpak run com.orcaslicer.OrcaSlicer`) and paste everything it prints when it dies. On systemd systems `coredumpctl info orca-slicer` gives a backtrace.
+      placeholder: |
+        Zipped project file
+        Zipped log folder
+        Zipped macOS .ips crash report, or the terminal output on Linux
+    validations:
+      required: true
+  - type: checkboxes
+    id: file_checklist
+    attributes:
+      label: Checklist of files to include
+      options:
+        - label: Log folder
+        - label: Project file
+        - label: Operating system crash report (macOS and Linux)
+  - type: textarea
+    attributes:
+      label: Anything else?
+      description: |
+        Screenshots? References? Anything that will give us more context about the crash you are encountering!
+    validations:
+      required: false
diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml
index 0ab9cfe41d..2357b1a5a4 100644
--- a/.github/workflows/build_all.yml
+++ b/.github/workflows/build_all.yml
@@ -14,6 +14,9 @@ on:
      - 'localization/**'
      - 'resources/**'
      - ".github/workflows/build_*.yml"
+     - ".github/workflows/unit_tests*.yml"
+     - 'build_win.bat'
+     - 'scripts/test_build_win.ps1'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
      - 'scripts/msix/**'
@@ -30,9 +33,8 @@ on:
      - '**/CMakeLists.txt'
      - 'version.inc'
      - ".github/workflows/build_*.yml"
+     - ".github/workflows/unit_tests*.yml"
      - 'build_linux.sh'
-     - 'build_release_vs.bat'
-     - 'build_release_vs2022.bat'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
      - 'build_release_macos.sh'
@@ -100,7 +102,7 @@ jobs:
       matrix:
         include: ${{ fromJSON(vars.SELF_HOSTED
           && '[{"arch":"x64","os":"orca-win-server","compiler":"clang"}]'
-          || '[{"arch":"x64","os":"windows-latest","compiler":"clang"},{"arch":"arm64","os":"windows-11-arm","compiler":"clang"}]') }}
+          || '[{"arch":"x64","os":"windows-latest","compiler":"clang"},{"arch":"arm64","os":"windows-11-vs2026-arm","compiler":"clang"}]') }}
     needs: check_build_script
     # Don't run scheduled builds on forks:
     if: ${{ !cancelled() && needs.check_build_script.result == 'success' && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
@@ -169,7 +171,7 @@ jobs:
     if: ${{ !cancelled() && success() && !vars.SELF_HOSTED }}
     uses: ./.github/workflows/unit_tests.yml
     with:
-      os: windows-11-arm
+      os: windows-11-vs2026-arm
       artifact: ${{ github.sha }}-tests-windows-arm64
       test-dir: build-arm64/tests
   unit_tests_macos_arm64:
@@ -207,7 +209,7 @@ jobs:
           ./validator-bin/OrcaSlicer_profile_validator -p "${{ github.workspace }}/resources/profiles" -s -l 2
   publish_test_results:
     name: Publish Test Results
-    needs: [unit_tests_linux_x86_64, unit_tests_linux_aarch64, unit_tests_windows_x64, unit_tests_windows_arm64, unit_tests_macos_arm64]
+    needs: [unit_tests_linux_x86_64, unit_tests_linux_aarch64, unit_tests_windows_x64, unit_tests_windows_arm64, unit_tests_macos_arm64, unit_tests_flatpak_x86_64, unit_tests_flatpak_aarch64]
     if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
     steps:
@@ -283,31 +285,86 @@ jobs:
       id: fp_cache_key
       run: echo "key=flatpak-builder-${{ matrix.variant.arch }}-${{ hashFiles('deps/**', 'scripts/flatpak/com.orcaslicer.OrcaSlicer.yml', 'scripts/flatpak/make_deps_tar.sh') }}" >> "$GITHUB_OUTPUT"
       shell: bash
-    # Manage flatpak-builder cache externally so PRs restore but never upload
+    # Manage flatpak-builder cache externally so PRs restore but never upload.
+    # The compiler cache under it is keyed per run below, so it is left out.
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
       uses: actions/cache/restore@v6
       with:
-        path: .flatpak-builder
+        path: |
+          .flatpak-builder/*
+          !.flatpak-builder/ccache
         key: ${{ steps.fp_cache_key.outputs.key }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
       uses: actions/cache@v6
       with:
-        path: .flatpak-builder
+        path: |
+          .flatpak-builder/*
+          !.flatpak-builder/ccache
         key: ${{ steps.fp_cache_key.outputs.key }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
+    # Compiler cache for the OrcaSlicer module, as in build_orca.yml. Pull
+    # requests only restore it; every other run (main, release branches, the
+    # nightly, a dispatch) saves it. orca_deps stays on the state cache above.
+    - name: Name the compiler cache leg
+      run: |
+        leg="Flatpak-${{ matrix.variant.arch }}"
+        echo "CCACHE_LEG=$leg" >> "$GITHUB_ENV"
+        echo "CCACHE_ENTRY=ccache-$leg-${{ github.run_id }}-${{ github.run_attempt }}" >> "$GITHUB_ENV"
+      shell: bash
+    - name: Restore compiler cache
+      id: ccache_restore
+      uses: actions/cache/restore@v6
+      with:
+        path: .flatpak-builder/ccache
+        key: ${{ env.CCACHE_ENTRY }}
+        restore-keys: ccache-${{ env.CCACHE_LEG }}-
     - name: Disable debug info for faster CI builds
       run: |
         sed -i '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
           scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
       shell: bash
-    - name: Inject git commit hash into Flatpak manifest
+    # flatpak-builder reuses a module from its cache when the definition and
+    # sources are unchanged, so a re-run of the same commit would skip the
+    # OrcaSlicer module and ship no test asset. A per-run value in that module's
+    # env keeps it rebuilding; orca_deps stays cached, and the compiler cache
+    # still serves the rebuild.
+    - name: Inject commit hash and flatpak-builder cache buster into Flatpak manifest
+      env:
+        flatpak_builder_cache_buster: ${{ github.run_id }}-${{ github.run_attempt }}
       run: |
-        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        git_commit_hash: \"$git_commit_hash\"|}" \
+        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n        git_commit_hash: \"$git_commit_hash\"|}" \
           scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
       shell: bash
+    # flatpak-builder's --ccache only wraps cc and gcc, and the manifest builds
+    # with clang, so CMake's launcher runs ccache instead; --ccache is still what
+    # mounts the cache directory into the sandbox. The settings go into that
+    # directory's own config file, which the sandbox reads too.
+    - name: Enable compiler cache
+      run: |
+        printf '        %s\n' \
+          'CMAKE_C_COMPILER_LAUNCHER: ccache' \
+          'CMAKE_CXX_COMPILER_LAUNCHER: ccache' > "$RUNNER_TEMP/ccache-env.yml"
+        sed -i "/^        git_commit_hash: /r $RUNNER_TEMP/ccache-env.yml" \
+          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+        grep -q '^        CMAKE_CXX_COMPILER_LAUNCHER: ccache$' scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+        mkdir -p .flatpak-builder/ccache
+        export CCACHE_DIR=$PWD/.flatpak-builder/ccache
+        ccache --set-config=max_size=3G
+        # The compiler is reinstalled every run, so its mtime means nothing.
+        ccache --set-config=compiler_check=content
+        # Headers a fresh checkout has just written, the few files that use
+        # __DATE__ or __TIME__, and the precompiled header, whose macros ccache
+        # cannot see.
+        ccache --set-config=sloppiness=pch_defines,time_macros,include_file_mtime,include_file_ctime
+        # Hash the includes the compiler reports instead of preprocessing every
+        # miss before compiling it.
+        ccache --set-config=depend_mode=true
+        # The restored directory carries the previous run's counters.
+        ccache -z
+      shell: bash
     - name: Check the manifest keeps orca_deps cacheable
       run: ./scripts/flatpak/check_manifest_cacheable.sh
       shell: bash
@@ -318,9 +375,54 @@ jobs:
       with:
         bundle: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
         manifest-path: scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-        cache: false
+        # cache only turns on flatpak-builder --ccache; the caching itself is above.
+        cache: true
+        restore-cache: false
+        save-cache: false
         arch: ${{ matrix.variant.arch }}
         upload-artifact: false
+        # run-tests fires the module's build-only test-commands; keep-build-dirs
+        # retains the binaries for the packaging step below.
+        run-tests: true
+        keep-build-dirs: true
+    # The build has just touched everything it can use, so an object untouched
+    # for a week is dead, usually orphaned by a flag change.
+    - name: Compiler cache statistics
+      if: always()
+      run: |
+        export CCACHE_DIR=$PWD/.flatpak-builder/ccache
+        ccache --evict-older-than 7d
+        ccache -s -v || ccache -s
+      shell: bash
+    # Save the new entry first, then drop the older ones for this leg on this
+    # ref, so a failed save leaves the previous entry in place. A cancelled or
+    # failed build saves too, since what it compiled is still valid; a restore
+    # that did not finish does not, since the directory may be a truncated copy.
+    - name: Save compiler cache
+      id: ccache_save
+      if: ${{ always() && steps.ccache_restore.outcome == 'success' && github.event_name != 'pull_request' }}
+      uses: actions/cache/save@v6
+      with:
+        path: .flatpak-builder/ccache
+        key: ${{ env.CCACHE_ENTRY }}
+    - name: Drop older compiler cache entries
+      if: ${{ always() && steps.ccache_save.outcome == 'success' }}
+      # The container has no gh, so this is the list and delete over the REST API.
+      # Older means a lower run id, so two runs finishing close together keep
+      # the newer entry whichever of them cleans up last.
+      continue-on-error: true
+      env:
+        GH_TOKEN: ${{ github.token }}
+      run: |
+        api="$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/caches"
+        curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
+          "$api?ref=$GITHUB_REF&key=ccache-$CCACHE_LEG-&per_page=100" \
+          | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
+              '.actions_caches[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \
+          | while read -r id; do
+              curl -sSf -X DELETE -H "Authorization: Bearer $GH_TOKEN" "$api/$id"
+            done
+      shell: bash
     - name: Upload artifacts Flatpak
       uses: actions/upload-artifact@v7
       with:
@@ -336,3 +438,46 @@ jobs:
         asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
         asset_content_type: application/octet-stream
         max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+    # The asset is /app (the exes link it at runtime) plus the build tree
+    # slimmed to what ctest needs.
+    - name: Package flatpak test asset
+      shell: bash
+      run: |
+        d=$(ls -d .flatpak-builder/build/OrcaSlicer-* | tail -1)
+        find "$d/build_flatpak" -mindepth 1 -maxdepth 1 ! -name tests -exec rm -rf {} +
+        # Strip debug info (the SDK builds with -g, only the app gets stripped);
+        # the bounds checks are compiled in, so a stripped exe still catches them.
+        find "$d/build_flatpak/tests" -type f -perm -u+x -exec strip --strip-unneeded {} + 2>/dev/null || true
+        # At runtime the tests read tests/ (TEST_DATA_DIR), scripts/, and under
+        # resources/ the shipped profiles (PROFILES_DIR) and the printers/ maps.
+        find "$d" -mindepth 1 -maxdepth 1 -type d \
+          ! -name tests ! -name build_flatpak ! -name scripts ! -name resources -exec rm -rf {} +
+        find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers -exec rm -rf {} +
+        tar -cf flatpak-test-asset.tar flatpak_app "$d"
+    - name: Upload flatpak test asset
+      uses: actions/upload-artifact@v7
+      with:
+        name: ${{ github.sha }}-flatpak-tests-${{ matrix.variant.arch }}
+        path: flatpak-test-asset.tar
+        retention-days: 1
+    # keep-build-dirs would otherwise land in the flatpak-builder cache saved post-job.
+    - name: Drop the kept build dirs before the flatpak-builder cache saves
+      if: always()
+      shell: bash
+      run: rm -rf .flatpak-builder/build
+  unit_tests_flatpak_x86_64:
+    name: Flatpak x86_64
+    needs: flatpak
+    if: ${{ !cancelled() && success() }}
+    uses: ./.github/workflows/unit_tests_flatpak.yml
+    with:
+      os: ubuntu-24.04
+      artifact: ${{ github.sha }}-flatpak-tests-x86_64
+  unit_tests_flatpak_aarch64:
+    name: Flatpak aarch64
+    needs: flatpak
+    if: ${{ !cancelled() && success() }}
+    uses: ./.github/workflows/unit_tests_flatpak.yml
+    with:
+      os: ubuntu-24.04-arm
+      artifact: ${{ github.sha }}-flatpak-tests-aarch64
diff --git a/.github/workflows/build_check_cache.yml b/.github/workflows/build_check_cache.yml
index 91ea51ac60..2da05e1d69 100644
--- a/.github/workflows/build_check_cache.yml
+++ b/.github/workflows/build_check_cache.yml
@@ -41,7 +41,8 @@ jobs:
           # restores one it cannot use. Linux amd64 passes no arch deliberately, so
           # 'linux-clang' keeps the cache it already has.
           cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
-          # ARM64 builds use the build-arm64 tree (see build_release_vs.bat); x64/other use build.
+          # The Windows ARM64 deps build in build-arm64, all others under build;
+          # build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
           dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
           output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
         run: |
diff --git a/.github/workflows/build_deps.yml b/.github/workflows/build_deps.yml
index f7082a8a06..a6d7a17dff 100644
--- a/.github/workflows/build_deps.yml
+++ b/.github/workflows/build_deps.yml
@@ -138,25 +138,11 @@ jobs:
             if (-not "${{ vars.SELF_HOSTED }}") {
               choco install strawberryperl
             }
-            $arch = "${{ inputs.arch }}"
-            # -l selects clang-cl and -x Ninja; together they build the deps with clang.
-            $clang = "${{ inputs.compiler }}" -eq "clang"
-            $flags = if ($clang) { "-l", "-x" } else { @() }
-            if ($clang) {
-              # OpenSSL builds with nmake, which needs a VC environment.
-              $vswhere = "${env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\vswhere.exe"
-              $vs = & $vswhere -latest -property installationPath
-              $devArch = if ($arch -eq "arm64") { "arm64" } else { "amd64" }
-              Import-Module "$vs\Common7\Tools\Microsoft.VisualStudio.DevShell.dll"
-              Enter-VsDevShell -VsInstallPath $vs -SkipAutomaticLocation -DevCmdArguments "-arch=$devArch"
-            }
-            if ($arch -eq "arm64") {
-              .\build_release_vs.bat deps arm64 @flags
-              .\build_release_vs.bat pack arm64
-            } else {
-              .\build_release_vs.bat deps @flags
-              .\build_release_vs.bat pack
-            }
+            # cache-path is the install directory inside the deps build directory.
+            $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+            # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
+            $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
+            .\build_win.bat -d --arch ${{ inputs.arch }} --deps-dir $deps @flags
         shell: pwsh
 
       - name: Build on Mac ${{ inputs.arch }}
diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index 8e1e28db13..e584fa03dd 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -76,6 +76,69 @@ jobs:
           if (-not (Test-Path "$cmakeBin\cmake.exe")) { throw "cmake.exe not found at $cmakeBin" }
           Add-Content -Path $env:GITHUB_PATH -Value $cmakeBin
 
+      # Compiler cache. Pushes save it, so main keeps it warm; pull requests
+      # restore it and discard what they compiled. Objects are keyed on the
+      # preprocessed source, the compiler and the flags, so a leg only ever
+      # hits its own entries. A failed install costs the caching, not the build.
+      - name: Name the compiler cache leg
+        if: ${{ !inputs.macos-combine-only }}
+        shell: bash
+        run: |
+          leg="${{ runner.os }}-${{ inputs.arch || 'amd64' }}${{ runner.os == 'Windows' && format('-{0}', inputs.compiler) || '' }}"
+          # clang-cl refuses a precompiled header from another cl.exe build and ccache
+          # does not hash that build, so each one gets its own cache. The build number
+          # is read from cl.exe itself; the toolset directory keeps its name across patches.
+          if [ "${{ runner.os }}" = Windows ]; then
+            vswhere='/c/Program Files (x86)/Microsoft Visual Studio/Installer/vswhere.exe'
+            toolset=$(tr -d '\r\n' < "$("$vswhere" -latest -products '*' -find 'VC\Auxiliary\Build\Microsoft.VCToolsVersion.default.txt' | tr -d '\r')")
+            cl=$("$vswhere" -latest -products '*' -find 'VC\Tools\MSVC\'"$toolset"'\**\cl.exe' | tr -d '\r' | head -1)
+            leg="$leg-vc$("$cl" 2>&1 | grep -o -E 'Version [0-9.]+' | cut -d' ' -f2)"
+          fi
+          echo "CCACHE_LEG=$leg" >> "$GITHUB_ENV"
+          echo "CCACHE_ENTRY=ccache-$leg-${{ github.run_id }}-${{ github.run_attempt }}" >> "$GITHUB_ENV"
+
+      # The action only installs and configures ccache. Restore and save go
+      # through actions/cache with one path string, since the cache service
+      # only matches entries saved under the identical path and the action
+      # spells it differently on Windows.
+      - name: Compiler cache
+        id: ccache
+        if: ${{ !inputs.macos-combine-only }}
+        continue-on-error: true
+        uses: hendrikmuhs/ccache-action@v1.2.24
+        with:
+          key: ${{ env.CCACHE_LEG }}
+          max-size: 3G
+          restore: false
+          save: false
+          # ccache -s runs as its own step; no summary table per job.
+          job-summary: ''
+
+      - name: Restore compiler cache
+        id: ccache_restore
+        if: ${{ steps.ccache.outcome == 'success' }}
+        uses: actions/cache/restore@v6
+        with:
+          path: ${{ github.workspace }}/.ccache
+          key: ${{ env.CCACHE_ENTRY }}
+          restore-keys: ccache-${{ env.CCACHE_LEG }}-
+
+      - name: Enable compiler cache
+        if: ${{ steps.ccache.outcome == 'success' }}
+        shell: bash
+        run: |
+          echo "CMAKE_C_COMPILER_LAUNCHER=ccache" >> "$GITHUB_ENV"
+          echo "CMAKE_CXX_COMPILER_LAUNCHER=ccache" >> "$GITHUB_ENV"
+          # Headers a fresh checkout has just written, the few files that
+          # use __DATE__ or __TIME__, and the precompiled header, whose
+          # macros ccache cannot see.
+          echo "CCACHE_SLOPPINESS=pch_defines,time_macros,include_file_mtime,include_file_ctime" >> "$GITHUB_ENV"
+          # Hash the includes the compiler reports instead of preprocessing
+          # every miss before compiling it.
+          echo "CCACHE_DEPEND=1" >> "$GITHUB_ENV"
+          # The restored directory carries the previous run's counters.
+          ccache -z
+
       - name: Get the version and date on Ubuntu and macOS
         if: runner.os != 'Windows'
         run: |
@@ -396,21 +459,13 @@ jobs:
         # env:
         #   WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
         #   WindowsSDKVersion: '10.0.26100.0\'
-        # "tests" builds the unit tests too; the unit_tests_windows_* jobs run them.
+        # --tests builds the unit tests too; the unit_tests_windows_* jobs run them.
         run: |
-          $arch = "${{ inputs.arch }}"
-          # -l selects clang-cl and -x Ninja; together they build the slicer with clang.
-          $clang = "${{ inputs.compiler }}" -eq "clang"
-          $flags = if ($clang) { "-l", "-x" } else { @() }
-          if ($clang) {
-            # Build against the same VC toolchain and SDK as the dependencies.
-            $vswhere = "${env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\vswhere.exe"
-            $vs = & $vswhere -latest -property installationPath
-            $devArch = if ($arch -eq "arm64") { "arm64" } else { "amd64" }
-            Import-Module "$vs\Common7\Tools\Microsoft.VisualStudio.DevShell.dll"
-            Enter-VsDevShell -VsInstallPath $vs -SkipAutomaticLocation -DevCmdArguments "-arch=$devArch"
-          }
-          if ($arch -eq "arm64") { .\build_release_vs.bat slicer arm64 @flags tests } else { .\build_release_vs.bat slicer @flags tests }
+          # cache-path is the install directory inside the deps build directory.
+          $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+          # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
+          $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
+          .\build_win.bat -s --tests -i --arch ${{ inputs.arch }} --build-dir $env:BUILD_DIR --deps-dir $deps @flags
         shell: pwsh
 
       - name: Build system preset cache (Windows)
@@ -670,3 +725,41 @@ jobs:
           asset_name: orca_custom_preset_tests.zip
           asset_content_type: application/octet-stream
           max_releases: 1
+
+      # The build has just touched everything it can use, so an object
+      # untouched for a week is dead, usually orphaned by a flag change.
+      - name: Compiler cache statistics
+        if: ${{ always() && steps.ccache.outcome == 'success' }}
+        shell: bash
+        run: |
+          ccache --evict-older-than 7d
+          ccache -s -v || ccache -s
+
+      # Entries are immutable, so the new one is saved first and the older
+      # ones for this leg on this ref are dropped afterwards: a failed save
+      # leaves the previous entry in place. A cancelled or failed build saves
+      # too, since what it compiled is still valid; a restore that did not
+      # finish does not, since the directory may be a truncated copy.
+      - name: Save compiler cache
+        id: ccache_save
+        if: ${{ always() && steps.ccache_restore.outcome == 'success' && github.event_name != 'pull_request' }}
+        uses: actions/cache/save@v6
+        with:
+          path: ${{ github.workspace }}/.ccache
+          key: ${{ env.CCACHE_ENTRY }}
+
+      - name: Drop older compiler cache entries
+        if: ${{ always() && steps.ccache_save.outcome == 'success' }}
+        # A read-only token (fork PRs) cannot delete; that only costs storage.
+        # Older means a lower run id, so two runs finishing close together keep
+        # the newer entry whichever of them cleans up last.
+        continue-on-error: true
+        shell: bash
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          gh cache list --ref "$GITHUB_REF" --key "ccache-$CCACHE_LEG-" --limit 100 --json id,key \
+            | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
+                '.[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \
+            | tr -d '\r' \
+            | while read -r id; do gh cache delete "$id"; done
diff --git a/.github/workflows/check_profiles.yml b/.github/workflows/check_profiles.yml
index b855d09da7..e668482bfd 100644
--- a/.github/workflows/check_profiles.yml
+++ b/.github/workflows/check_profiles.yml
@@ -9,8 +9,9 @@ on:
     - release/*
     paths:
     - 'resources/profiles/**'
-    # The extra JSON check also validates resources/printers/bambu_filament_ids.json,
-    # and lives in scripts/, so a PR touching only those must still run this workflow.
+    # orca_profile_tool.py also validates resources/printers/bambu_filament_ids.json, and
+    # both it and its tests live in scripts/, so a PR touching only those must still run
+    # this workflow.
     - 'resources/printers/**'
     - 'scripts/**'
     - ".github/workflows/check_profiles.yml"
@@ -36,12 +37,23 @@ jobs:
       - name: Checkout repository
         uses: actions/checkout@v7
 
-      - name: Run extra JSON check
-        id: extra_json_check
+      # Deliberately not continue-on-error, unlike every check below: if the tool itself is
+      # broken, nothing it then reports about the profiles is worth reading.
+      - name: Run the profile tool's own unit tests
+        run: python3 -m unittest discover -s scripts/tests -t scripts
+
+      # What the validator below cannot see. It loads the tree the way the slicer does, so
+      # it never notices a profile no <vendor>.json indexes, a preset name two files claim,
+      # an id that is not the mint of its own triple, or a file that normalize and
+      # update-index would still rewrite.
+      # The step id is the handle the PR comment and the failure gate below use; renaming it
+      # silently disables them.
+      - name: Check profiles (orca_profile_tool.py)
+        id: profile_tool
         continue-on-error: true
         run: |
           set +e
-          python3 ./scripts/orca_extra_profile_check.py 2>&1 | tee ${{ runner.temp }}/extra_json_check.log
+          python3 ./scripts/orca_profile_tool.py check 2>&1 | tee ${{ runner.temp }}/profile_tool.log
           exit ${PIPESTATUS[0]}
 
       # download
@@ -68,8 +80,8 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -s -l 2 2>&1 | tee ${{ runner.temp }}/validate_slice.log
           exit ${PIPESTATUS[0]}
-      # All vendors' filament_id collisions were fixed (see scripts/filament_id_snapshot.json),
-      # so the duplicate-filament-subtype check runs tree-wide.
+      # All vendors' filament_id collisions were fixed, so the duplicate-filament-subtype
+      # check runs tree-wide.
       - name: validate filament subtype check
         id: validate_filament_subtypes
         continue-on-error: true
@@ -186,7 +198,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.profile_tool.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -194,11 +206,11 @@ jobs:
             echo "## :x: Profile Validation Errors"
             echo ""
 
-            if [ "${{ steps.extra_json_check.outcome }}" = "failure" ]; then
-              echo "### Extra JSON Check Failed"
+            if [ "${{ steps.profile_tool.outcome }}" = "failure" ]; then
+              echo "### Profile Check Failed (orca_profile_tool.py)"
               echo ""
               echo '```'
-              head -c 30000 ${{ runner.temp }}/extra_json_check.log || echo "No output captured"
+              head -c 30000 ${{ runner.temp }}/profile_tool.log || echo "No output captured"
               echo '```'
               echo ""
             fi
@@ -240,7 +252,7 @@ jobs:
             fi
 
             echo "---"
-            echo "*Please fix the above errors and push a new commit.*"
+            echo '*Fix the errors above and push a new commit. To reproduce this run locally: `scripts/check_profile.sh`, or `scripts\check_profile.bat` on Windows.*'
           } > ${{ runner.temp }}/profile-check-results/pr_comment.md
 
       - name: Upload comment artifact
@@ -252,7 +264,8 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.profile_tool.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
-          echo "One or more profile checks failed. See above for details."
+          echo "One or more profile checks failed; see the step logs above."
+          echo 'Reproduce the whole run locally with scripts/check_profile.sh (scripts\check_profile.bat on Windows).'
           exit 1
diff --git a/.github/workflows/doxygen-docs.yml b/.github/workflows/doxygen-docs.yml
index 6af7255fa3..d7d2f982e7 100644
--- a/.github/workflows/doxygen-docs.yml
+++ b/.github/workflows/doxygen-docs.yml
@@ -19,11 +19,18 @@ jobs:
     permissions:
       contents: read
     steps:
-      - uses: thejerrybao/setup-swap-space@v1
-        with:
-          swap-space-path: /swapfile
-          swap-size-gb: 8
-          remove-existing-swap-files: true
+      # Doxygen with call graphs over all of src/ outgrows the runner's RAM;
+      # replace the runner's swapfile with an 8 GB one.
+      - name: Grow swap space
+        run: |
+          set -euo pipefail
+          sudo swapoff -a
+          sudo rm -f /swapfile
+          sudo fallocate -l 8G /swapfile
+          sudo chmod 600 /swapfile
+          sudo mkswap /swapfile
+          sudo swapon /swapfile
+          free -h
 
       - name: Checkout repository
         uses: actions/checkout@v7
diff --git a/.github/workflows/parity_nightly.yml b/.github/workflows/parity_nightly.yml
new file mode 100644
index 0000000000..79f5c9b514
--- /dev/null
+++ b/.github/workflows/parity_nightly.yml
@@ -0,0 +1,219 @@
+# Nightly parity checks from OrcaSlicer/orca-test-repo, kept out of the
+# per-build "Run external slicer regression tests" step because they take far
+# longer than that step's budget:
+#   effect  - the CLI override sweep's full effect stage: every landed option
+#             re-sliced on its own to see whether it changes the G-code
+#   harness - the GUI-vs-CLI parity harness (metrics only, never fails)
+# Both test the latest successful build_all.yml Linux AppImage from main, with
+# sources checked out at the commit that build was made from. Nothing here
+# gates a build or a PR.
+name: Parity Nightly
+
+on:
+  schedule:
+    # build_all.yml starts at 17:00 UTC and has finished by ~20:00
+    - cron: "0 21 * * *"
+  workflow_dispatch:
+    inputs:
+      test_repo_ref:
+        description: "orca-test-repo ref to run"
+        required: false
+        default: "main"
+      build_branch:
+        description: "branch whose latest successful build_all artifact to test"
+        required: false
+        default: "main"
+      fixtures:
+        description: "harness fixture ids, space-separated (empty = all)"
+        required: false
+        default: ""
+      cli_presets:
+        description: "harness lane C presets: flat = flatten inherits first, raw = leaf profile as-is"
+        required: false
+        default: "flat"
+
+permissions:
+  contents: read
+  actions: read
+
+jobs:
+  build:
+    name: Find the build to test
+    # Don't run scheduled checks on forks
+    if: github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer'
+    runs-on: ubuntu-24.04
+    outputs:
+      run_id: ${{ steps.find.outputs.run_id }}
+      head_sha: ${{ steps.find.outputs.head_sha }}
+    steps:
+      - id: find
+        env:
+          GH_TOKEN: ${{ github.token }}
+          GH_REPO: ${{ github.repository }}
+        run: |
+          set -euo pipefail
+          gh run list --workflow build_all.yml \
+            --branch "${{ inputs.build_branch || 'main' }}" \
+            --status success --limit 1 --json databaseId,headSha \
+            --jq '"run_id=\(.[0].databaseId)\nhead_sha=\(.[0].headSha)"' \
+            >> "$GITHUB_OUTPUT"
+          cat "$GITHUB_OUTPUT"
+
+  effect:
+    name: Override sweep effect stage (shard ${{ matrix.shard }})
+    needs: build
+    runs-on: ubuntu-24.04
+    timeout-minutes: 60
+    strategy:
+      fail-fast: false
+      matrix:
+        # orca-test-repo's parity/effect_routing.json holds a 2-way split,
+        # ~12.5 min a shard on this runner
+        shard: [0, 1]
+    steps:
+      - &checkout-suite
+        name: Check out the test suite
+        uses: actions/checkout@v7
+        with:
+          repository: OrcaSlicer/orca-test-repo
+          ref: ${{ inputs.test_repo_ref || 'main' }}
+          path: orca-test-repo
+
+      # The AppImage ships only packed preset caches, so profiles and the CLI
+      # option surface come from the sources the build was made from
+      - &checkout-slicer
+        name: Check out OrcaSlicer at the build's commit
+        uses: actions/checkout@v7
+        with:
+          ref: ${{ needs.build.outputs.head_sha }}
+          path: slicer
+          lfs: 'false'
+
+      - &extract-appimage
+        name: Download and extract the Linux AppImage
+        env:
+          GH_TOKEN: ${{ github.token }}
+          GH_REPO: ${{ github.repository }}
+        run: |
+          set -euo pipefail
+          gh run download "${{ needs.build.outputs.run_id }}" --dir appimage \
+            --pattern "OrcaSlicer_Linux_ubuntu_2404*"
+          appimage=$(find appimage -name "*.AppImage" ! -name "*aarch64*" | head -1)
+          [ -n "$appimage" ] || { echo "no x86_64 AppImage in run ${{ needs.build.outputs.run_id }}"; exit 1; }
+          chmod +x "$appimage"
+          "$appimage" --appimage-extract > /dev/null
+          # The bare binary cannot find the AppImage's bundled libraries; AppRun
+          # sets them up and execs it, so exit codes and signals pass through
+          [ -x squashfs-root/AppRun ] || { echo "no AppRun in the AppImage"; exit 1; }
+          echo "ORCA_BIN=$PWD/squashfs-root/AppRun" >> "$GITHUB_ENV"
+          echo "ORCA_SOURCE=$PWD/slicer" >> "$GITHUB_ENV"
+
+      - name: Install the AppImage's host runtime dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y --no-install-recommends \
+            libopengl0 libglu1-mesa libgl1 libegl1 libwebkit2gtk-4.1-0
+
+      - uses: actions/setup-python@v6
+        with:
+          python-version: "3.12"
+
+      - name: Install suite dependencies
+        run: pip install -r orca-test-repo/requirements.txt
+
+      - name: Run the override sweep with the full effect stage
+        id: run
+        continue-on-error: true
+        working-directory: orca-test-repo
+        run: |
+          set -o pipefail
+          # -rA keeps the per-stage summaries, which pytest otherwise swallows
+          # for passing tests
+          python -m pytest test_cli_overrides.py -c pytest.ini -v -rA \
+            --effect-full --effect-shard ${{ matrix.shard }}/2 \
+            --orca-bin "$ORCA_BIN" --orca-source "$ORCA_SOURCE" \
+            2>&1 | tee ../sweep.log
+
+      - name: Publish job summary
+        if: always()
+        run: |
+          {
+            echo "## Override sweep effect stage, shard ${{ matrix.shard }}/2"
+            echo "Build ${{ needs.build.outputs.head_sha }} (run ${{ needs.build.outputs.run_id }})"
+            echo '```'
+            grep -E "\[override sweep" sweep.log || echo "no stage summaries, see the log"
+            grep -E "^=+ .*(passed|failed)" sweep.log | tail -1 || true
+            echo '```'
+          } >> "$GITHUB_STEP_SUMMARY"
+
+      - name: Upload the override report
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: override-report-shard${{ matrix.shard }}
+          path: |
+            orca-test-repo/.pytest_cache/override_report.json
+            sweep.log
+          if-no-files-found: warn
+          retention-days: 30
+
+      # The sweep step continues on error so the summary and report still get
+      # published; this puts the failure back on the job
+      - name: Fail the job if the sweep failed
+        if: steps.run.outcome == 'failure'
+        run: |
+          echo "the override sweep failed, see the job summary and the uploaded report" >&2
+          exit 1
+
+  harness:
+    name: GUI-vs-CLI parity harness
+    needs: build
+    runs-on: ubuntu-24.04
+    timeout-minutes: 180
+    steps:
+      - *checkout-suite
+      - *checkout-slicer
+      - *extract-appimage
+
+      - name: Install display tooling and the AppImage's host runtime
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y --no-install-recommends \
+            xvfb xdotool imagemagick openbox mesa-utils \
+            libopengl0 libglu1-mesa libgl1 libegl1 libwebkit2gtk-4.1-0
+
+      - name: Run the parity harness
+        run: |
+          set -euo pipefail
+          fixtures=()
+          for f in ${{ inputs.fixtures || '' }}; do
+            fixtures+=(--fixture "$f")
+          done
+          # 2 GUI displays: ~1.5 cores peak / ~1.9 GB on this 4-vCPU runner,
+          # and each fixture is fully isolated, so results match a serial run
+          python3 orca-test-repo/parity/run_parity.py \
+            --slicer-root "$ORCA_SOURCE" --bin "$ORCA_BIN" \
+            --cli-presets "${{ inputs.cli_presets || 'flat' }}" \
+            --gui-workers 2 --out "$PWD/parity-out" "${fixtures[@]}"
+
+      - name: Publish job summary
+        if: always()
+        run: |
+          if [ -f parity-out/report.md ]; then
+            cat parity-out/report.md >> "$GITHUB_STEP_SUMMARY"
+          else
+            echo "the harness produced no report, see the log" >> "$GITHUB_STEP_SUMMARY"
+          fi
+
+      - name: Drop per-lane datadirs before upload
+        if: always()
+        run: rm -rf parity-out/*/seed parity-out/*/datadir-* || true
+
+      - name: Upload the scorecard and evidence
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: parity-scorecard
+          path: parity-out/
+          if-no-files-found: warn
+          retention-days: 30
diff --git a/.github/workflows/unit_tests.yml b/.github/workflows/unit_tests.yml
index 5f54f6581d..f5850d9fd7 100644
--- a/.github/workflows/unit_tests.yml
+++ b/.github/workflows/unit_tests.yml
@@ -54,8 +54,10 @@ jobs:
         shell: bash
         run: |
           tar -xvf build_tests.tar
-          # Multi-config generators (Windows/macOS) need a config; Linux is single-config.
-          scripts/run_unit_tests.sh "${{ inputs.test-dir }}" "${{ runner.os != 'Linux' && 'Release' || '' }}"
+          # Every platform builds with a multi-config generator (build_linux.sh uses Ninja
+          # Multi-Config), so ctest needs the config: without it, plain add_test() tests
+          # lose their labels and report "Not Run".
+          scripts/run_unit_tests.sh "${{ inputs.test-dir }}" Release
       - name: Upload Test Logs
         if: ${{ failure() }}
         uses: actions/upload-artifact@v7
diff --git a/.github/workflows/unit_tests_flatpak.yml b/.github/workflows/unit_tests_flatpak.yml
new file mode 100644
index 0000000000..ce261c210c
--- /dev/null
+++ b/.github/workflows/unit_tests_flatpak.yml
@@ -0,0 +1,67 @@
+name: Flatpak Unit Tests
+
+# Run the flatpak build's test asset inside the sandbox, once per arch. The
+# GNOME SDK's _GLIBCXX_ASSERTIONS gives a bounds-checked STL that catches
+# out-of-bounds reads no other test leg does.
+on:
+  workflow_call:
+    inputs:
+      os:
+        required: true
+        type: string
+      artifact:
+        description: Test asset uploaded by the flatpak build leg
+        required: true
+        type: string
+
+jobs:
+  unit_tests_flatpak:
+    name: Flatpak Unit Tests
+    runs-on: ${{ inputs.os }}
+    container:
+      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
+      options: --privileged
+    steps:
+      - name: Restore test asset
+        uses: actions/download-artifact@v8
+        with:
+          name: ${{ inputs.artifact }}
+      - name: Run unit tests (bounds-checked sandbox)
+        timeout-minutes: 20
+        shell: bash
+        run: |
+          tar -xf flatpak-test-asset.tar
+          # Recreate the stable module symlink so /run/build/OrcaSlicer resolves.
+          d=$(ls -d .flatpak-builder/build/OrcaSlicer-* | tail -1)
+          ln -sfn "$(basename "$d")" .flatpak-builder/build/OrcaSlicer
+          # The runtime + SDK + the llvm extension the app metadata references,
+          # which `flatpak build` mounts; best-effort, the image may have them.
+          flatpak remote-add --if-not-exists --user flathub https://flathub.org/repo/flathub.flatpakrepo
+          flatpak install --user -y --noninteractive flathub \
+            org.gnome.Platform//50 org.gnome.Sdk//50 org.freedesktop.Sdk.Extension.llvm21//25.08 || true
+          # `flatpak build` uses bwrap (no rofiles-fuse, which this container
+          # rejects); bind-mount the build tree so the baked TEST_DATA_DIR resolves.
+          flatpak build --die-with-parent --share=network \
+            --bind-mount=/run/build="$PWD/.flatpak-builder/build" \
+            flatpak_app \
+            bash -c 'cd /run/build/OrcaSlicer && scripts/run_unit_tests.sh build_flatpak/tests'
+      - name: Collect test results
+        if: always()
+        shell: bash
+        run: |
+          d=$(ls -d .flatpak-builder/build/OrcaSlicer-* 2>/dev/null | tail -1 || true)
+          [ -n "$d" ] && [ -f "$d/ctest_results.xml" ] && cp "$d/ctest_results.xml" ctest_results.xml || true
+      - name: Upload Test Results
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: test-results-${{ inputs.artifact }}
+          path: ctest_results.xml
+          retention-days: 5
+          if-no-files-found: warn
+      - name: Delete Test Asset
+        if: success()
+        uses: geekyeggo/delete-artifact@v6
+        with:
+          name: ${{ inputs.artifact }}
+          failOnError: false
diff --git a/AGENTS.md b/AGENTS.md
index 4be195b40d..3d0a61b303 100644
--- a/AGENTS.md
+++ b/AGENTS.md
@@ -20,9 +20,9 @@ cmake --build . --config %build_type% --target ALL_BUILD -- -m
 Catch2 framework. Tests in `tests/`; see [tests/AGENTS.md](tests/AGENTS.md) for where a new test belongs and the conventions to follow.
 
 ```bash
-cd build && ctest --output-on-failure           # all tests
-ctest --test-dir ./tests/libslic3r              # individual suite
-ctest --test-dir ./tests/fff_print
+cd build && ctest -C Release --output-on-failure    # all tests
+ctest --test-dir ./tests/libslic3r -C Release       # individual suite
+ctest --test-dir ./tests/fff_print -C Release
 ```
 
 ## Documentation
@@ -64,16 +64,16 @@ ctest --test-dir ./tests/fff_print
 - Keep code concise and clear. Manually simplify AI generated bloated codes before review.
 - Include targeted tests or documented verification for behavior changes, especially in slicing logic, profiles, formats, and GUI defaults.
 - For profile changes (`resources/profiles/<Vendor>/**`), check that `version` in the sibling `resources/profiles/<Vendor>.json` was bumped.
-- For translation changes (`localization/i18n/**/*.po`), check that recurring terms match the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_glossary.md) for that language.
+- For translation changes (`localization/i18n/**/*.po`), check that recurring terms match the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) for that language.
 
 ## Localization & translations
 
 Catalogs live in `localization/i18n/<lang>/OrcaSlicer_<lang>.po`; the template is `OrcaSlicer.pot`.
-See the [Localization guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_guide.md) for the human-facing version of these principles.
+See the [Localization guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_guide.md) for the human-facing version of these principles.
 
 ### Terminology
 
-- Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
+- Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
 - If a term's established translation changes, update both the affected `.po` files and the glossary (`localization_glossary.tsv`, then regenerate) so they stay in sync.
 - Translate the *meaning*, not the words. Check what the string actually controls before translating it — English reuses one word for different things. `Flow ratio` (multiplier), `Flow Rate` (throughput) and `Flow Dynamics` (pressure compensation) are three different terms; `extruder` may mean the toolhead, the feeder motor, or the nozzle depending on the string.
 - Reuse one template per recurring message shape (`Failed to connect to …`, `Are you sure you want to …?`), even where the English wording varies.
diff --git a/CMakeLists.txt b/CMakeLists.txt
index b8ed6a70c6..e3547281f0 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -4,6 +4,10 @@ endif()
 
 cmake_minimum_required(VERSION 3.13)
 
+if(POLICY CMP0177)
+    cmake_policy(SET CMP0177 NEW)
+endif()
+
 
 # The following line used to be in tests/CMakeLists.txt
 # Having it there causes rebuilds of all targets on any CMakeLists.txt change under tests/
@@ -558,59 +562,92 @@ if ((NOT MSVC OR IS_CLANG_CL) AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR
     elseif (NOT MINGW)
         set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall" )
     endif ()
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-reorder" )
 
-    # On GCC and Clang, no return from a non-void function is a warning only. Here, we make it an error.
-    add_compile_options(-Werror=return-type)
+    # Every warning is an error unless it appears in one of the two lists below.
+    #   disabled - never wanted. Off everywhere, so it never warns or errors.
+    #   demoted  - wanted, not cleared yet. Still warns, does not error.
 
-    # Since some portions of code are just commented out or put under conditional compilation, there are
-    # a bunch of warning related to unused functions and variables. Suppress those warnings to not pollute
-    # compilers diagnostics output with warnings we not going to look at
-    add_compile_options(-Wno-unused-function -Wno-unused-variable -Wno-unused-but-set-variable -Wno-unused-label -Wno-unused-local-typedefs)
+    # Disabled.
+    set(warnings_disabled
+        reorder                  # members initialised in an order we chose
+        sign-compare             # signed/unsigned comparisons throughout
+        misleading-indentation   # false positives on mixed tabs and spaces
+        switch                   # unhandled enum value in a switch
+        unused-function          # commented-out or conditionally compiled code
+        unused-variable          # commented-out or conditionally compiled code
+        unused-but-set-variable  # commented-out or conditionally compiled code
+        unused-label             # commented-out or conditionally compiled code
+        unused-local-typedefs    # commented-out or conditionally compiled code
+    )
+    if (CMAKE_CXX_COMPILER_ID MATCHES "Clang")
+        list(APPEND warnings_disabled deprecated-declarations)  # legacy OpenGL calls
+    endif ()
+    if (CMAKE_CXX_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 6.0)
+        list(APPEND warnings_disabled ignored-attributes)       # from Eigen headers marked SYSTEM
+    endif ()
+    if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+        list(APPEND warnings_disabled unknown-pragmas)          # igl pragmas, GCC bug 66943
+    endif ()
+    foreach (w IN LISTS warnings_disabled)
+        add_compile_options(-Wno-${w})
+    endforeach ()
 
-    # Ignore signed/unsigned comparison warnings
-    add_compile_options(-Wno-sign-compare)
+    # GCC is not built in CI, so don't throw errors CI won't catch.
+    if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+        add_compile_options(-Werror=return-type)
+    else ()
+        # Turn everything else into an error. Dependency headers are exempt because the
+        # SYSTEM include flag (-imsvc on clang-cl, -isystem elsewhere) keeps their
+        # diagnostics out.
+        add_compile_options(-Werror)
+    endif ()
 
-    # The mismatch of tabs and spaces throughout the project can sometimes
-    # cause this warning to appear even though the indentation is fine.
-    # Some includes also cause the warning
-    add_compile_options(-Wno-misleading-indentation)
+    # Demoted. Remove a name once its category is cleared on every compiler.
+    set(warnings_demoted)
+    if (APPLE)
+        list(APPEND warnings_demoted
+            # MacDarkMode.mm makes two calls to AppKit's private titlebarViewController
+            # and one to a wxWidgets category on NSTableColumn whose header is not
+            # imported. Clearing it means declaring the private selectors ourselves, which
+            # needs a macOS build to verify.
+            objc-method-access
+        )
+    endif ()
+    if (WIN32 AND CMAKE_SYSTEM_PROCESSOR STREQUAL "ARM64")
+        list(APPEND warnings_demoted
+            # About two dozen GetProcAddress casts, most in the vendored dark_mode.hpp,
+            # retype FARPROC to a real signature. The __stdcall typedefs are identical to
+            # FARPROC on x64, so only arm64 reports them. Clearing them is a separate
+            # sweep.
+            cast-function-type-mismatch
+        )
+    endif ()
+    if (CMAKE_CXX_COMPILER_ID MATCHES "Clang")
+        list(APPEND warnings_demoted
+            # enum-constexpr-conversion is a Clang warning that defaults to an error,
+            # present through clang 20 and gone in clang 21.
+            enum-constexpr-conversion
+        )
+    endif ()
 
-    # Disable warning if enum value does not have a corresponding case in switch statement
-    add_compile_options(-Wno-switch)
-
-    # removes LOTS of extraneous Eigen warnings (GCC only supports it since 6.1)
-    # https://eigen.tuxfamily.org/bz/show_bug.cgi?id=1221
-    if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" OR CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 6.0)
-        add_compile_options(-Wno-ignored-attributes) # Tamas: Eigen include dirs are marked as SYSTEM
-    endif()
-
-    # Clang reports legacy OpenGL calls as deprecated. Turn off the warning for now
-    # to reduce the clutter, we know about this one. It should be reenabled after
-    # we finally get rid of the deprecated code.
-    if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-        add_compile_options(-Wno-deprecated-declarations)
-    endif()
-
-    if((${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang" OR ${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang") AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
-        include(CheckCXXCompilerFlag)
-        check_cxx_compiler_flag(-Wno-error=enum-constexpr-conversion HAS_WNO_ERROR_ENUM_CONSTEXPR_CONV)
-        if(HAS_WNO_ERROR_ENUM_CONSTEXPR_CONV)
-            add_compile_options(-Wno-error=enum-constexpr-conversion)
-        endif()
-    endif()
-
-    #GCC generates loads of -Wunknown-pragmas when compiling igl. The fix is not easy due to a bug in gcc, see
-    # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66943 or
-    # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53431
-    # We will turn the warning of for GCC for now:
-    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-        # GCC generates loads of -Wunknown-pragmas when compiling igl. The fix is not easy due to a bug in gcc, see
-        # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66943 or
-        # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53431
-        # We will turn the warning of for GCC for now:
-        add_compile_options(-Wno-unknown-pragmas)
-    endif()
+    # The list mixes names not every compiler has, so add each exception only where the
+    # compiler knows the warning. Probe with the positive -W<name>, which an unknown
+    # warning fails on both compilers (GCC errors, Clang reports unknown-warning-option).
+    # An option that takes a =N argument rejects the bare -W<name>, so fall back to
+    # -W<name>=1 and demote with the trailing =.
+    include(CheckCXXCompilerFlag)
+    foreach (category IN LISTS warnings_demoted)
+        string(MAKE_C_IDENTIFIER "ORCA_HAS_W_${category}" _orca_has_w)
+        check_cxx_compiler_flag("-W${category}" ${_orca_has_w})
+        if (${_orca_has_w})
+            add_compile_options(-Wno-error=${category})
+        else ()
+            check_cxx_compiler_flag("-W${category}=1" ${_orca_has_w}_arg)
+            if (${${_orca_has_w}_arg})
+                add_compile_options(-Wno-error=${category}=)
+            endif ()
+        endif ()
+    endforeach ()
 
     # Compress the debug info with zstd to save space in Flatpak CI builds
     if(FLATPAK)
@@ -620,10 +657,6 @@ if ((NOT MSVC OR IS_CLANG_CL) AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR
         endif()
     endif()
 
-    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 14)
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=template-id-cdtor" )
-    endif()
-
 endif()
 
 if (SLIC3R_ASAN)
@@ -1186,8 +1219,9 @@ endif ()
 if (NOT SLIC3R_WARNINGS)
     add_compile_options(-w)
 elseif (MSVC AND NOT IS_CLANG_CL)
-    # /we4715 is C4715, no return from a non-void function, matching the
-    # -Werror=return-type the GNU/Clang builds apply.
+    # /we4715 is C4715, no return from a non-void function, an error on the GNU/Clang
+    # builds under -Werror. MSVC is not in that model, so this stays a single promoted
+    # warning.
     add_compile_options(/W3 /we4715)
 endif ()
 
diff --git a/build_release.bat b/build_release.bat
deleted file mode 100644
index f751c17e5a..0000000000
--- a/build_release.bat
+++ /dev/null
@@ -1,52 +0,0 @@
-set WP=%CD%
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set DEPS=%CD%/OrcaSlicer_dep
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type% %SIG_FLAG%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
diff --git a/build_release_vs.bat b/build_release_vs.bat
deleted file mode 100644
index 3842f1d198..0000000000
--- a/build_release_vs.bat
+++ /dev/null
@@ -1,190 +0,0 @@
-@REM OrcaSlicer build script for Windows with VS auto-detect
-@echo off
-set WP=%CD%
-set _START_TIME=%TIME%
-
-@REM Default target architecture to the host CPU arch; override by passing
-@REM "x64" or "arm64" as an argument. PROCESSOR_ARCHITEW6432 covers a 32-bit
-@REM shell running on a 64-bit OS, where PROCESSOR_ARCHITECTURE reads "x86".
-set arch=x64
-if /I "%PROCESSOR_ARCHITECTURE%"=="ARM64" set arch=ARM64
-if /I "%PROCESSOR_ARCHITEW6432%"=="ARM64" set arch=ARM64
-if /I "%1"=="arm64" set arch=ARM64
-if /I "%2"=="arm64" set arch=ARM64
-if /I "%1"=="x64" set arch=x64
-if /I "%2"=="x64" set arch=x64
-
-@REM Check for Ninja Multi-Config option (-x)
-set USE_NINJA=0
-for %%a in (%*) do (
-    if "%%a"=="-x" set USE_NINJA=1
-)
-
-@REM Check for clang-cl option (-l). Combined with -x it also builds the deps with
-@REM clang-cl; on the Visual Studio generator it applies to the slicer only, because
-@REM the dependency sub-builds have no toolset to inherit and stay on MSVC.
-set CLANG_ARG=
-set TOOLSET_ARG=
-for %%a in (%*) do (
-    if "%%a"=="-l" (
-        set CLANG_ARG=-DCMAKE_C_COMPILER=clang-cl -DCMAKE_CXX_COMPILER=clang-cl
-        set TOOLSET_ARG=-T ClangCL
-    )
-)
-
-@REM Check for unit-tests option ("tests")
-set BUILD_TESTS=OFF
-for %%a in (%*) do (
-    if /I "%%a"=="tests" set BUILD_TESTS=ON
-)
-
-if "%USE_NINJA%"=="1" (
-    echo Using Ninja Multi-Config generator
-    set CMAKE_GENERATOR="Ninja Multi-Config"
-    set VS_VERSION=Ninja
-    goto :generator_ready
-)
-
-@REM Detect Visual Studio version using msbuild
-echo Detecting Visual Studio version using msbuild...
-
-@REM Try to get MSBuild version - the output format varies by VS version
-set VS_MAJOR=
-for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-    for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-    set MSBUILD_OUTPUT=%%i
-    goto :version_found
-)
-
-@REM Alternative method for newer MSBuild versions
-if "%VS_MAJOR%"=="" (
-    for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-        for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-        set MSBUILD_OUTPUT=%%i
-        goto :version_found
-    )
-)
-
-:version_found
-echo MSBuild version detected: %MSBUILD_OUTPUT%
-echo Major version: %VS_MAJOR%
-
-if "%VS_MAJOR%"=="" (
-    echo Error: Could not determine Visual Studio version from msbuild
-    echo Please ensure Visual Studio and MSBuild are properly installed
-    exit /b 1
-)
-
-if "%VS_MAJOR%"=="16" (
-    set VS_VERSION=2019
-    set CMAKE_GENERATOR="Visual Studio 16 2019"
-) else if "%VS_MAJOR%"=="17" (
-    set VS_VERSION=2022
-    set CMAKE_GENERATOR="Visual Studio 17 2022"
-) else if "%VS_MAJOR%"=="18" (
-    set VS_VERSION=2026
-    set CMAKE_GENERATOR="Visual Studio 18 2026"
-) else (
-    echo Error: Unsupported Visual Studio version: %VS_MAJOR%
-    echo Supported versions: VS2019 (16.8+^), VS2022 (17.x^), VS2026 (18.x^)
-    exit /b 1
-)
-
-echo Detected Visual Studio %VS_VERSION% (version %VS_MAJOR%)
-echo Using CMake generator: %CMAKE_GENERATOR%
-
-:generator_ready
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION
-    cd %WP%/deps/build
-    if "%arch%"=="ARM64" cd %WP%/deps/build-arm64
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win-!arch!_!build_date!_vs!VS_VERSION!.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win-!arch!_!build_date!_vs!VS_VERSION!.zip OrcaSlicer_dep
-    goto :done
-)
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-if "%arch%"=="ARM64" set build_dir=%build_dir%-arm64
-echo build type set to %build_type%, arch=%arch%
-
-setlocal DISABLEDELAYEDEXPANSION
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-if defined CLANG_ARG if "%USE_NINJA%"=="0" echo Note: -l needs -x for the dependencies; building them with MSVC.
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake ../ -G %CMAKE_GENERATOR% %CLANG_ARG% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps
-) else (
-    cmake ../ -G %CMAKE_GENERATOR% -A %arch% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps -- -m
-)
-@echo off
-
-if "%1"=="deps" goto :done
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake .. -G %CMAKE_GENERATOR% %CLANG_ARG% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target all
-) else (
-    cmake .. -G %CMAKE_GENERATOR% -A %arch% %TOOLSET_ARG% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target ALL_BUILD -- -m
-)
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
-
-:done
-@echo off
-for /f "tokens=1-3 delims=:.," %%a in ("%_START_TIME: =0%") do set /a "_start_s=%%a*3600+%%b*60+%%c"
-for /f "tokens=1-3 delims=:.," %%a in ("%TIME: =0%") do set /a "_end_s=%%a*3600+%%b*60+%%c"
-set /a "_elapsed=_end_s - _start_s"
-if %_elapsed% lss 0 set /a "_elapsed+=86400"
-set /a "_hours=_elapsed / 3600"
-set /a "_remainder=_elapsed - _hours * 3600"
-set /a "_mins=_remainder / 60"
-set /a "_secs=_remainder - _mins * 60"
-echo.
-echo Build completed in %_hours%h %_mins%m %_secs%s
diff --git a/build_release_vs2022.bat b/build_release_vs2022.bat
deleted file mode 100644
index 32f39745e3..0000000000
--- a/build_release_vs2022.bat
+++ /dev/null
@@ -1,80 +0,0 @@
-@REM OrcaSlicer build script for Windows
-@echo off
-set WP=%CD%
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION 
-    cd %WP%/deps/build
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win64_!build_date!_vs2022.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win64_!build_date!_vs2022.zip OrcaSlicer_dep
-    exit /b 0
-)
-
-set debug=OFF
-set debuginfo=OFF
-@REM Default target architecture to the host CPU arch; override with x64/arm64 arg.
-set arch=x64
-if /I "%PROCESSOR_ARCHITECTURE%"=="ARM64" set arch=ARM64
-if /I "%PROCESSOR_ARCHITEW6432%"=="ARM64" set arch=ARM64
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if /I "%1"=="arm64" set arch=ARM64
-if /I "%2"=="arm64" set arch=ARM64
-if /I "%1"=="x64" set arch=x64
-if /I "%2"=="x64" set arch=x64
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-if "%arch%"=="ARM64" set build_dir=%build_dir%-arm64
-echo build type set to %build_type%, arch=%arch%
-
-setlocal DISABLEDELAYEDEXPANSION 
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake ../ -G "Visual Studio 17 2022" -A %arch% -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-@echo off
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake .. -G "Visual Studio 17 2022" -A %arch% -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
diff --git a/cmake/modules/PrecompiledHeader.cmake b/cmake/modules/PrecompiledHeader.cmake
index 7ef80aacff..7d8b3a5603 100644
--- a/cmake/modules/PrecompiledHeader.cmake
+++ b/cmake/modules/PrecompiledHeader.cmake
@@ -256,6 +256,13 @@ function(add_precompiled_header _target _input)
     message(STATUS "Adding precompiled header ${_input} to target ${_target}.")
     target_precompile_headers(${_target} PRIVATE ${_input})
 
+    # Clang records the modification time of every input in the precompiled
+    # header, which makes it differ between two checkouts of the same source
+    # and defeats a compiler cache. The build system already rebuilds the
+    # header when an input changes.
+    target_compile_options(${_target} PRIVATE
+        "$<$<CXX_COMPILER_ID:Clang,AppleClang>:SHELL:-Xclang -fno-pch-timestamp>")
+
     get_target_property(_sources ${_target} SOURCES)
     list(FILTER _sources INCLUDE REGEX ".*\\.mm?")
 
diff --git a/deps/Boost/Boost.cmake b/deps/Boost/Boost.cmake
index 08b62b9fb8..1526928094 100644
--- a/deps/Boost/Boost.cmake
+++ b/deps/Boost/Boost.cmake
@@ -27,8 +27,15 @@ endif ()
 # Boost.Container's bundled dlmalloc passes int* where the Win32 Interlocked API
 # takes volatile long*; cl compiles that with a warning, clang errors out.
 set(_boost_c_flags_line "")
+set(_boost_cxx_flags_line "")
 if (MSVC AND CMAKE_C_COMPILER_ID STREQUAL "Clang")
     set(_boost_c_flags_line "-DCMAKE_C_FLAGS:STRING=-Wno-incompatible-pointer-types")
+    # The Visual Studio generator applies only the link language's flags to a
+    # project, and boost_container links as C++, so its C file never sees
+    # CMAKE_C_FLAGS. The C++ flags reach every file; keep CMake's defaults.
+    if (CMAKE_GENERATOR MATCHES "Visual Studio")
+        set(_boost_cxx_flags_line "-DCMAKE_CXX_FLAGS:STRING=${CMAKE_CXX_FLAGS} -Wno-incompatible-pointer-types")
+    endif ()
 endif ()
 
 orcaslicer_add_cmake_project(Boost
@@ -46,6 +53,7 @@ orcaslicer_add_cmake_project(Boost
         "${_context_arch_line}"
         "${_context_impl_line}"
         "${_boost_c_flags_line}"
+        "${_boost_cxx_flags_line}"
 )
 
 set(DEP_Boost_DEPENDS ZLIB)
diff --git a/deps/CMakeLists.txt b/deps/CMakeLists.txt
index 060bdca445..e02186705b 100644
--- a/deps/CMakeLists.txt
+++ b/deps/CMakeLists.txt
@@ -185,6 +185,11 @@ function(orcaslicer_add_cmake_project projectname)
 
     if (_dep_msvc_gen)
       set(_gen CMAKE_GENERATOR "${DEP_MSVC_GEN}" CMAKE_GENERATOR_PLATFORM "${DEP_PLATFORM}")
+      # The toolset picks the compiler here, not the CMAKE_<LANG>_COMPILER
+      # forwarded below, so without it a clang-cl superbuild builds with cl.
+      if (CMAKE_GENERATOR_TOOLSET)
+        list(APPEND _gen CMAKE_GENERATOR_TOOLSET "${CMAKE_GENERATOR_TOOLSET}")
+      endif ()
     else()
       set(_gen "")
     endif()
diff --git a/deps/Draco/Draco.cmake b/deps/Draco/Draco.cmake
index 02ac7efe13..77f73684f6 100644
--- a/deps/Draco/Draco.cmake
+++ b/deps/Draco/Draco.cmake
@@ -7,4 +7,7 @@ orcaslicer_add_cmake_project(Draco
     ${_options}
     URL https://github.com/google/draco/archive/refs/tags/1.5.7.zip
     URL_HASH SHA256=27b72ba2d5ff3d0a9814ad40d4cb88f8dc89a35491c0866d952473f8f9416b77
+    CMAKE_ARGS
+        # The encoder and decoder tools duplicate draco.lib; see deps-windows.cmake.
+        "${DEP_LLD_FORCE_MULTIPLE}"
 )
\ No newline at end of file
diff --git a/deps/NLopt/NLopt.cmake b/deps/NLopt/NLopt.cmake
index fdd6341f2b..07afc95a48 100644
--- a/deps/NLopt/NLopt.cmake
+++ b/deps/NLopt/NLopt.cmake
@@ -8,6 +8,8 @@ orcaslicer_add_cmake_project(NLopt
     -DNLOPT_GUILE:BOOL=OFF
     -DNLOPT_SWIG:BOOL=OFF
     -DNLOPT_TESTS:BOOL=OFF
+    # testopt is built regardless of NLOPT_TESTS; see deps-windows.cmake.
+    "${DEP_LLD_FORCE_MULTIPLE}"
 )
 
 if (MSVC)
diff --git a/deps/OpenSSL/OpenSSL.cmake b/deps/OpenSSL/OpenSSL.cmake
index 2fb4b51757..4a2d49572b 100644
--- a/deps/OpenSSL/OpenSSL.cmake
+++ b/deps/OpenSSL/OpenSSL.cmake
@@ -80,6 +80,12 @@ ExternalProject_Add(dep_OpenSSL
     INSTALL_COMMAND ${_install_cmd}
 )
 
+if (CMAKE_GENERATOR MATCHES "Visual Studio")
+    # OpenSSL builds with cl, but MSBuild runs nmake in this project's toolset
+    # environment, and ClangCL's puts clang's headers first. Use the default.
+    set_target_properties(dep_OpenSSL PROPERTIES VS_PLATFORM_TOOLSET "$(DefaultPlatformToolset)")
+endif ()
+
 ExternalProject_Add_Step(dep_OpenSSL install_cmake_files
     DEPENDEES install
 
diff --git a/deps/deps-windows.cmake b/deps/deps-windows.cmake
index 6e73f7d4b5..4305489758 100644
--- a/deps/deps-windows.cmake
+++ b/deps/deps-windows.cmake
@@ -42,6 +42,15 @@ else ()
     message(FATAL_ERROR "Unsupported OS architecture: ${DEPS_ARCH}")
 endif ()
 
+# Draco's tools and NLopt's testopt compile sources that are also in their
+# static library. MSBuild passes the library before the objects and lld-link
+# resolves as it goes, so the library's copy wins and the object then reads as
+# a duplicate. Nothing uses those executables, so let lld keep the first one.
+set(DEP_LLD_FORCE_MULTIPLE "")
+if (CMAKE_GENERATOR MATCHES "Visual Studio" AND CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+    set(DEP_LLD_FORCE_MULTIPLE "-DCMAKE_EXE_LINKER_FLAGS:STRING=${CMAKE_EXE_LINKER_FLAGS} /FORCE:MULTIPLE")
+endif ()
+
 if (${DEP_DEBUG})
     set(DEP_BOOST_DEBUG "debug")
 else ()
diff --git a/deps/python3/arm64-unicodectype.props b/deps/python3/arm64-unicodectype.props
new file mode 100644
index 0000000000..5f5727c842
--- /dev/null
+++ b/deps/python3/arm64-unicodectype.props
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Compiles Objects/unicodectype.c without optimisation. VS 2026's ARM64 code
+     generator needs about 27 GB for _PyUnicode_ToNumeric, a switch with 1951
+     cases. CPython has the same workaround (python/cpython#153668). -->
+<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <ClCompile Update="..\Objects\unicodectype.c">
+      <Optimization>Disabled</Optimization>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+    </ClCompile>
+  </ItemGroup>
+</Project>
diff --git a/deps/python3/python3.cmake b/deps/python3/python3.cmake
index 2eae315d0b..3e063fac4e 100644
--- a/deps/python3/python3.cmake
+++ b/deps/python3/python3.cmake
@@ -88,8 +88,18 @@ if(WIN32)
         list(APPEND _python_env_args "PreferredToolArchitecture=${_python_tool_arch}")
     endif()
 
+    # MSBuild reads extra switches from PCbuild/msbuild.rsp.
+    set(_python_rsp "/p:PlatformToolset=${_python_platform_toolset}\n")
+    # VS 2026's ARM64 code generator needs about 27 GB for one function in
+    # Objects/unicodectype.c (python/cpython#153668); the property sheet compiles
+    # that file without optimisation.
+    if(_python_pcbuild_platform STREQUAL "ARM64")
+        file(TO_NATIVE_PATH "${CMAKE_CURRENT_LIST_DIR}/arm64-unicodectype.props" _python_arm64_props)
+        string(APPEND _python_rsp "/p:ForceImportAfterCppTargets=\"${_python_arm64_props}\"\n")
+    endif()
+    file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/python3-msbuild.rsp" "${_python_rsp}")
     set(_conf_cmd
-        cmd /c "echo /p:PlatformToolset=${_python_platform_toolset}>PCbuild\\msbuild.rsp"
+        ${CMAKE_COMMAND} -E copy "${CMAKE_CURRENT_BINARY_DIR}/python3-msbuild.rsp" <SOURCE_DIR>/PCbuild/msbuild.rsp
     )
     set(_build_cmd
         ${CMAKE_COMMAND} -E env ${_python_env_args}
diff --git a/deps/wxWidgets/0001-macos-use-srgb-colour-components.patch b/deps/wxWidgets/0001-macos-use-srgb-colour-components.patch
new file mode 100644
index 0000000000..decbee0ad9
--- /dev/null
+++ b/deps/wxWidgets/0001-macos-use-srgb-colour-components.patch
@@ -0,0 +1,29 @@
+diff --git a/src/osx/cocoa/colour.mm b/src/osx/cocoa/colour.mm
+index 31515d146f..86b33e94a2 100644
+--- a/src/osx/cocoa/colour.mm
++++ b/src/osx/cocoa/colour.mm
+@@ -125,3 +125,3 @@
+     wxOSXEffectiveAppearanceSetter helper;
+-    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpaceName:NSCalibratedRGBColorSpace] )
++    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpace:[NSColorSpace sRGBColorSpace]] )
+         return [colRGBA redComponent];
+@@ -134,3 +134,3 @@
+     wxOSXEffectiveAppearanceSetter helper;
+-    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpaceName:NSCalibratedRGBColorSpace] )
++    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpace:[NSColorSpace sRGBColorSpace]] )
+         return [colRGBA greenComponent];
+@@ -143,3 +143,3 @@
+     wxOSXEffectiveAppearanceSetter helper;
+-    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpaceName:NSCalibratedRGBColorSpace] )
++    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpace:[NSColorSpace sRGBColorSpace]] )
+         return [colRGBA blueComponent];
+@@ -152,3 +152,3 @@
+     wxOSXEffectiveAppearanceSetter helper;
+-    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpaceName:NSCalibratedRGBColorSpace] )
++    if ( NSColor* colRGBA = [m_nsColour colorUsingColorSpace:[NSColorSpace sRGBColorSpace]] )
+         return [colRGBA alphaComponent];
+@@ -160,3 +160,3 @@
+ {
+-    return [m_nsColour colorUsingColorSpaceName:NSCalibratedRGBColorSpace] != nil;
++    return [m_nsColour colorUsingColorSpace:[NSColorSpace sRGBColorSpace]] != nil;
+ }
diff --git a/deps/wxWidgets/wxWidgets.cmake b/deps/wxWidgets/wxWidgets.cmake
index 1e2cc85f78..e57e82f3e9 100644
--- a/deps/wxWidgets/wxWidgets.cmake
+++ b/deps/wxWidgets/wxWidgets.cmake
@@ -21,12 +21,22 @@ else ()
     set(_wx_edge "-DwxUSE_WEBVIEW_EDGE=OFF")
 endif ()
 
+set(_wx_patch_command "")
+if (APPLE)
+    set(_wx_patch_command
+        ${GIT_EXECUTABLE} checkout -f -- src/osx/cocoa/colour.mm
+        COMMAND ${GIT_EXECUTABLE} apply --verbose
+                ${CMAKE_CURRENT_LIST_DIR}/0001-macos-use-srgb-colour-components.patch
+    )
+endif ()
+
 orcaslicer_add_cmake_project(
     wxWidgets
     GIT_REPOSITORY "https://github.com/SoftFever/Orca-deps-wxWidgets"
     GIT_TAG v3.3.2
     GIT_SHALLOW ON
     GIT_SUBMODULES 3rdparty/catch 3rdparty/pcre 3rdparty/libwebp
+    PATCH_COMMAND ${_wx_patch_command}
     DEPENDS ${PNG_PKG} ${ZLIB_PKG} ${EXPAT_PKG} ${JPEG_PKG}
     CMAKE_ARGS
         -DwxBUILD_PRECOMP=ON
diff --git a/deps_src/admesh/stlinit.cpp b/deps_src/admesh/stlinit.cpp
index a69bd5497a..9d44cdf266 100644
--- a/deps_src/admesh/stlinit.cpp
+++ b/deps_src/admesh/stlinit.cpp
@@ -162,7 +162,7 @@ static bool stl_read(stl_file *stl, FILE *fp, int first_facet, bool first, Impor
         rewind(fp);
         try{
             char solid_name[256];
-            int res_solid = fscanf(fp, " solid %[^\n]", solid_name);
+            int res_solid = fscanf(fp, " solid %255[^\n]", solid_name);
             if (res_solid == 1) {
                 char* mw_position = strstr(solid_name, "MW");
                 if (mw_position != NULL) {
@@ -170,7 +170,7 @@ static bool stl_read(stl_file *stl, FILE *fp, int first_facet, bool first, Impor
                     char version_str[16];
                     char model_id_str[128]; 
                     char country_code_str[16];
-                    int num_values = sscanf(mw_position + 3, "%s %s %s", version_str, model_id_str, country_code_str);
+                    int num_values = sscanf(mw_position + 3, "%15s %127s %15s", version_str, model_id_str, country_code_str);
                     if (num_values == 3) {
                         if (strcmp(version_str, "1.0") == 0) {
                             model_id = model_id_str;
diff --git a/docs/HLSD/filament_id.md b/docs/HLSD/filament_id.md
index 0aaf845909..122dfb6fdb 100644
--- a/docs/HLSD/filament_id.md
+++ b/docs/HLSD/filament_id.md
@@ -9,7 +9,7 @@ OrcaFilamentLibrary (OFL), Qidi, or Snapmaker bundle. The granularity is the nam
 not the brand behind it: `AAA PLA Lite` and `AAA PLA Pro` are two filaments with two ids, not
 variants of one.
 
-**How it is generated:** an id is computed, never invented. `scripts/orca_id_tool.py`
+**How it is generated:** an id is computed, never invented. `scripts/orca_profile_tool.py`
 mints it as a deterministic hash of the product's identity — the triple
 `(filament_vendor, filament_type, filament name)`, where the filament name is the preset name
 with its `@...` variant suffix stripped — producing an 8-character `OF*` code that is the
@@ -34,23 +34,19 @@ This page is the rule for authoring `filament_id` in system profiles
 
 > [!IMPORTANT]
 > **Never write a `filament_id` value by hand.** A new filament gets its id from
-> `python scripts/orca_id_tool.py --generate`; one already in the tree has one — inherit it.
+> `python scripts/orca_profile_tool.py generate-id`; one already in the tree has one — inherit it.
 
-## The design, in two pieces
+## The design
 
 Because several consumers match **globally by id alone, first hit wins** (see the next
 section), any two materials sharing one id feed wrong data somewhere — a wrong tray name, a
 wrong support-material flag, a wrong nozzle grouping — and inside one printer a duplicated id
 makes AMS spool matching a coin toss. Hand-written ids produce such collisions constantly, so
-the system is built to make them impossible:
-
-1. **Deterministic minting.** An id is a pure hash of the product's identity — no registry to
-   maintain, no next-free-number ceremony, no way for two concurrent PRs to race for the same
-   number, and no way to get it wrong by hand, because you never write it by hand.
-2. **A sanctioned snapshot.** The complete id landscape derived from the tree must equal
-   `scripts/filament_id_snapshot.json` exactly, so every change to ids, claims (which bundles
-   ship which id, and for which filament), or product identity surfaces as a reviewable diff to
-   one file — the maintainer gate.
+the system is built to make them impossible: an id is a pure hash of the product's identity —
+no registry to maintain, no next-free-number ceremony, no way for two concurrent PRs to race
+for the same number, and no way to get it wrong by hand, because you never write it by hand.
+CI holds every id in the tree to that rule, so the profiles themselves are the whole record of
+which products exist and which bundles ship them.
 
 ## Who consumes the id
 
@@ -160,8 +156,8 @@ key needed). Tuning a generic material → **join the OrcaFilamentLibrary filame
    different product by rule 5, so it then needs its own id.
 5. **Ids follow the product identity.** The id is a pure function of the product triple
    `(filament_vendor, filament_type, filament name)`, so correcting any of them re-mints the id
-   **by design**, applied by `--generate` (preview with `--dry-run`, confine with `--vendor`) and
-   gated by the `--update-snapshot` diff; the exact sequence is in the FAQ. Nothing forwards
+   **by design**, applied by `generate-id` (preview with `--dry-run`, confine with `--vendor`);
+   the exact sequence is in the FAQ. Nothing forwards
    the old value, so anything outside the tree that stored it — a device tray, a calibration
    record, a saved project — falls back to matching by filament type until the user re-selects
    the filament. Re-mint deliberately, and only to fix a genuinely wrong identity.
@@ -170,7 +166,7 @@ key needed). Tuning a generic material → **join the OrcaFilamentLibrary filame
 ## Minting — nobody invents ids
 
 New ids are deterministic, computed exactly like the `setting_id` precedent
-(the `setting_id` half of `scripts/orca_id_tool.py`):
+(the `setting_id` half of `scripts/orca_profile_tool.py generate-id`):
 
 ```text
 FILAMENT_ID_NAMESPACE = uuid5(setting-id NAMESPACE, "filament_id")
@@ -196,13 +192,13 @@ Snapmaker bundles alike; the OFL generic `Generic/PLA/Generic PLA` mints `OFDSrz
 by 35 bundles — most by independent declarations converging on the same mint, the rest
 purely through inheritance from the OFL preset.
 
-Nothing but the triple feeds the mint — not the rest of the tree, not the snapshot, not what
-another preset of the product happens to carry. Determined triple, determined id: one product
+Nothing but the triple feeds the mint — not the rest of the tree, not what another preset of
+the product happens to carry. Determined triple, determined id: one product
 carries one id and there is no second acceptable value for it, so any other value on a preset
-is a mismatch `--check` reports and `--generate` pulls back. Two *different* products whose
+is a mismatch `check` reports and `generate-id` pulls back. Two *different* products whose
 triples mint the same base62 value would be a collision (a roughly 36-bit id space against a
-few thousand products); nothing salts past it: `--check` reports it naming both products,
-`--generate` refuses to write it, and the remedy is a rename so their triples differ. Where
+few thousand products); nothing salts past it: `check` reports it naming both products,
+`generate-id` refuses to write it, and the remedy is a rename so their triples differ. Where
 two presets of one product would be AMS-ambiguous on a printer, the fix is likewise in the
 profiles — make their `compatible_printers` disjoint (structure rule 3), retire the redundant
 preset, or, if they really are different products, give them different names so their triples
@@ -212,80 +208,76 @@ Workflow for a new filament:
 
 ```bash
 # 1. Author the filament with NO filament_id key anywhere.
-python scripts/orca_id_tool.py --dry-run          # 2. preview the ids — writes nothing
-python scripts/orca_id_tool.py --generate         # 3. apply them to the profile file(s)
-python scripts/orca_id_tool.py --update-snapshot  # 4. record the new claims in the snapshot
-python scripts/orca_id_tool.py --check            # 5. validate the filament_id state
-python scripts/orca_extra_profile_check.py        # 6. ...and everything else CI checks
-# 7. Commit the profile edits together with scripts/filament_id_snapshot.json, for review.
+python scripts/orca_profile_tool.py generate-id --dry-run  # 2. preview the ids — writes nothing
+python scripts/orca_profile_tool.py generate-id           # 3. apply them to the profile file(s)
+python scripts/orca_profile_tool.py check                 # 4. validate — everything CI checks
 ```
 
-`--generate` makes every filament's id equal the mint of its own
+`generate-id` makes every filament's id equal the mint of its own
 `(filament_vendor, filament_type, filament name)` triple: it inserts one where an instantiated
 filament resolves none, and re-derives one that does not match. A preset that *inherits* a
-mismatching id is the one case left to the author — check 3b names it, and the fix is to inherit
+mismatching id is the one case left to the author — check 2b names it, and the fix is to inherit
 a preset of the same filament or to give the preset its own key. A declaration is left alone
-exactly when it already equals the one id its triple mints, and a collision (check 3d) is
+exactly when it already equals the one id its triple mints, and a collision (check 2d) is
 reported and left unwritten. The same run assigns
 `generate_preset_setting_id(vendor, type, name)` to every instantiated filament, process
 and machine preset of every vendor except BBL, which keeps its authoritative `G*` ids, strips
 `setting_id` from base profiles, and fixes the misspelled `settings_id` key — dropped, or, for
 BBL, whose ids have no formula to fall back on, restored under the correct name. It is idempotent and
 byte-preserving (indentation, BOM, and line endings intact, every edited file re-parsed to fail
-loudly), and a no-op on a tree that already passes `scripts/orca_extra_profile_check.py` — the
-check CI runs over both id kinds, of which `--check` is the `filament_id` half.
+loudly), and a no-op on a tree that already passes `check`.
 
 - `--filament-id` limits the run to `filament_id`.
 - `--setting-id` limits the run to `setting_id`. The two exclude each other; pass neither to
   write both.
 - `--vendor VENDOR` confines the run to that bundle; repeatable. The id is a function of the
-  triple alone, so a narrowed run writes exactly what a full one would; `--check` reports
+  triple alone, so a narrowed run writes exactly what a full one would; `check` reports
   whatever it left outside.
-- `--dry-run` reports what `--generate` would do and writes nothing; with no mode of its own it
-  implies `--generate`, so `--dry-run --vendor <Vendor>` previews just that bundle.
+- `--dry-run` reports what the run would do and writes nothing, so
+  `generate-id --dry-run --vendor <Vendor>` previews just that bundle.
 - `--profiles DIR` points the tooling at a different profile tree (default
-  `resources/profiles`). `--check` and `--update-snapshot` read and write the sanctioned state of
-  the tree they are given, so pointing them elsewhere needs `--snapshot PATH` for that tree too —
-  `scripts/filament_id_snapshot.json` describes `resources/profiles` and no other tree.
+  `resources/profiles`).
 
-**Identity fixes need no separate mode.** `--generate` re-derives an id that no longer matches its
-triple exactly the way it fills in a missing one, so a rename or a `filament_vendor` /
-`filament_type` correction is just: fix the config, run `--generate` (confine it with `--vendor`,
-preview it with `--dry-run`), then `--update-snapshot` and review the diff.
+The tool's other commands maintain the tree around the ids: `fix` normalises profile files,
+`trim` drops files no `<vendor>.json` list references, and `update-index` rebuilds those lists.
+They do not touch ids; `--help` documents them.
+
+**Identity fixes need no separate command.** `generate-id` re-derives an id that no longer matches
+its triple exactly the way it fills in a missing one, so a rename or a `filament_vendor` /
+`filament_type` correction is just: fix the config and run `generate-id` (confine it with
+`--vendor`, preview it with `--dry-run`).
 
 If you skip the tooling, CI fails and prints the remedy: the expected id for your filament and
-the instruction to run `python scripts/orca_id_tool.py --generate`; once the id is minted, the
-snapshot checks likewise point at `--update-snapshot` and tell you to commit the resulting
-diff.
+the instruction to run `python scripts/orca_profile_tool.py generate-id`.
 
-## Reserved namespaces — never mint or hand-write into
+## Ids other systems compose
 
-A **reserved namespace** is an id space no system profile may declare, because an external
-catalog or a device protocol owns the values. None of them has an owning vendor: there is no
-bundle — not even the one whose printers use the catalog — that may write one into a profile.
+Every filament profile carries a minted id, with no exceptions and no spellings held back for
+anyone. There is therefore no reserved namespace to respect and no bundle that owns one: an id
+some other system composes for its own purposes is simply not the mint of a triple, so it
+cannot be a system profile's `filament_id`, and the format check rejects it for that reason
+alone — same error, same remedy, whoever wrote it.
 
-| Space | Status | Rule |
-| --- | --- | --- |
-| `GF*` | Bambu AMS/RFID catalog | declarable by **nobody**, BBL included: Bambu's own ids live in the generated catalog map, never in a profile |
-| `QD_*` | Qidi device protocol | declarable by **nobody**, Qidi included: the box composes these ids at runtime and they are not preset ids |
-| `P` + 7 hex chars (case-insensitive), `"null"` | user-created custom filaments (`CreatePresetsDialog.cpp`) | never appears in system profiles |
+Three such spaces exist around us, and are worth recognising so nobody mistakes one for an id
+to copy into a profile:
 
-The two device namespaces, in detail:
-
-- **Bambu (`GF*`).** Bambu's device/RFID/cloud catalog is external and opaque, which is a
-  reason to keep it out of the profiles rather than to let one bundle own it. Every BBL filament
-  mints an `OF` id from its triple like every other vendor's, and the correspondence to Bambu's
-  catalog ids lives in one generated file the app applies at the printer boundary — the next
-  section. Nothing under `resources/profiles/**` carries a `GF*` id today and nothing can be
-  exempted, so a `GF*` id appearing anywhere in the tree is a mistake, whoever wrote it.
-- **Qidi (`QD_*`).** `QD_*` is a device-*protocol* namespace, not a preset id space: the
-  Qidi box path composes `QD_<series>_<vendor>_<typeidx>` ids at runtime (slot vendor and
-  type indices reported by the device, the series digit inferred client-side from the printer
-  model/name). Qidi presets carry ordinary minted `OF*` ids (generics share the OFL ids), so
-  a composed id matches no preset and the slot falls back to filament type; translating it to
-  the filament's id belongs in `QidiPrinterAgent`. The alternative — treating per-series
-  protocol ids as preset ids — would put one product under five ids (`QIDI PLA Rapido` would
-  be `QD_0_1_1` through `QD_4_1_1`), exactly the fragmentation the mint rule removes.
+- **Bambu's `GF*` catalog.** Bambu's device / RFID / cloud catalog is external and opaque. Every
+  BBL filament mints an `OF` id from its triple like every other vendor's, and the
+  correspondence to Bambu's catalog ids lives in one generated file the app applies at the
+  printer boundary — the next section. Note that `GF` is a *prefix*, not a namespace the tree
+  avoids: BBL's authoritative `setting_id` values include `GF`-prefixed ones, and
+  `resources/profiles/blacklist.json` and `BBL/filament/filaments_color_codes.json` both
+  reference Bambu catalog ids by design. The rule is about `filament_id` and nothing else.
+- **Qidi's `QD_*` protocol ids.** The Qidi box composes `QD_<series>_<vendor>_<typeidx>` at
+  runtime (slot vendor and type indices reported by the device, the series digit inferred
+  client-side from the printer model/name). Qidi presets carry ordinary minted `OF*` ids
+  (generics share the OFL ids), so a composed id matches no preset and the slot falls back to
+  filament type; translating it to the filament's id belongs in `QidiPrinterAgent`. Treating
+  per-series protocol ids as preset ids would put one product under five ids
+  (`QIDI PLA Rapido` would be `QD_0_1_1` through `QD_4_1_1`) — exactly the fragmentation the
+  mint rule removes.
+- **`P` + 7 hex chars, and `"null"`.** What `CreatePresetsDialog.cpp` gives a filament a *user*
+  creates. Those are user presets, not system profiles, and the two never meet in the tree.
 
 ## The Bambu catalog map
 
@@ -337,7 +329,7 @@ OrcaFilamentLibrary. **135 is the number to expect at every regeneration** — 1
 one-off size of the transition and stopped being computable from the tree once the BBL bundle
 was re-minted, so do not "fix" the report to print it.
 
-**Check 6** lives in `check_filament_ids`, so profile CI runs it alongside the other five. It
+**Check 4** lives in `check_filament_ids`, so profile CI runs it alongside the other three. It
 holds the file to its contract: it parses, carries `source` / `bambustudio_commit` /
 `generated`, keys only `OF`-format ids, maps each Bambu id at most once, and — for every row
 whose key the tree actually claims — agrees with the tree on that id's `(vendor, type, name)`
@@ -426,23 +418,14 @@ map would silently reproduce the bug.
 ## How CI enforces this
 
 Profile CI (`check_profiles.yml`) runs `check_filament_ids()` tree-wide via
-`scripts/orca_extra_profile_check.py`. Its ground truth is
-**`scripts/filament_id_snapshot.json` — the sanctioned state**: the id state derived from the
-tree must equal the snapshot exactly, in both directions. Any change to the id landscape
-therefore surfaces as a diff to that file, and **that snapshot diff is what maintainers review
-and gate in a PR**. Never edit the snapshot by hand — `--update-snapshot` regenerates it
-deterministically (running it twice changes nothing). The snapshot holds one map, `ids`: each
-entry is the product the id is minted from (`filament_vendor`, `filament_type`, `name`) and the
-`filaments` claiming it (`Vendor/Filament`), and it sanctions *state*, never exceptions: no check
-consults it to excuse a preset from a rule, and there is no grandfather list of any kind.
+`scripts/orca_profile_tool.py check`. Every check judges the tree against the rules on this
+page and nothing else — there is no recorded id state to match and no grandfather list of any
+kind.
 
 The checks, in brief:
 
-- **Format** — every id occurring in the tree is `OF` + 6 base62 chars. No exceptions: not a
-  snapshot entry, not BBL.
-- **Snapshot equality** — tree claims == snapshot claims **and** each id's declared triple ==
-  its snapshot entry, both directions: any `filament_vendor`/`filament_type`/name change
-  surfaces as a snapshot diff.
+- **Format** — every id occurring in the tree is `OF` + 6 base62 chars. No exceptions, not
+  even BBL.
 - **Identity** — the id is a function of the triple alone. A declared `OF*` id must equal the
   one id its declarer's own triple mints, with no second acceptable value; the id an
   instantiated preset *inherits* must equal the mint of *its* own triple, however it inherits
@@ -450,8 +433,6 @@ The checks, in brief:
   system filament must resolve an effective id at all (recall: an id-less one is a hard load
   error in C++ that discards the whole vendor bundle); and no two products mint one id (a
   base62 collision, resolved by renaming one of them). The errors print the expected id.
-- **Reserved namespaces** — `GF*`, `QD_*`, `P<7-hex>` or `"null"` claimed by any vendor,
-  BBL and Qidi included.
 - **Triple integrity** — every declarer must resolve a non-empty `filament_vendor` and
   `filament_type` (generics use `"Generic"`), and all declarers of one filament within a
   bundle must agree on the triple.
@@ -461,16 +442,14 @@ The checks, in brief:
   tree claims. See [The Bambu catalog map](#the-bambu-catalog-map); the remedy is always to
   regenerate, never to hand-edit.
 
-A profile that declares a **reserved-namespace** id — `GF*`, `QD_*` or `P<7-hex>`, whatever
-its vendor — cannot pass the format check, so `--update-snapshot` refuses to sanction it
-rather than hide the mistake until CI. For a Bambu-cataloged product, the catalog map is where
-the correspondence belongs. Any other new sharing via a *declared* id is caught by the identity
-check; sharing through inheritance carries no declaration to check and surfaces only as a new
-claim in the snapshot diff — which is exactly why that diff is the gate.
+A profile that declares an id no triple mints — a Bambu catalog id, a composed Qidi one, a
+hand-typed value, whatever its vendor — fails the format check. For a Bambu-cataloged product
+the catalog map is where the correspondence belongs. Two products sharing one id are caught by
+the identity check whether the id is declared or inherited.
 
-`orca_extra_profile_check.py` separately holds every declared id to the AMS 8-character limit,
-tree-wide and for every vendor alike, scoped to the presets a vendor's index actually
-references (a file the index never loads cannot break AMS matching).
+The same `check` run holds every declared id to the AMS 8-character limit, tree-wide and for
+every vendor alike, scoped to the presets a vendor's index actually references (a file the index
+never loads cannot break AMS matching).
 
 Complementing the Python checks, CI also runs the C++ profile validator with `-f`
 (`check_filament_subtypes`): it loads the bundle exactly as the app does and flags any printer
@@ -488,21 +467,21 @@ ambiguity check behind structure rule 3.
   `Generic PLA` base name, set `compatible_printers`; no id key needed.
 - **A branded filament that borrows a generic's settings?** Fine — inherit `Generic X @System`
   (or any real filament) for the settings and declare the id of your own filament; run
-  `python scripts/orca_id_tool.py --generate` to mint it. Inheritance never changes the id.
+  `python scripts/orca_profile_tool.py generate-id` to mint it. Inheritance never changes the id.
 - **I need to fix a filament's `filament_vendor` or `filament_type`.** Fix the config, run
-  `--generate --vendor <Vendor>` (preview with `--dry-run`), then `--update-snapshot`, and commit
-  the profile and snapshot diffs together. The id re-derives from the corrected identity, and
+  `generate-id --vendor <Vendor>` (preview with `--dry-run`), and commit the result. The id
+  re-derives from the corrected identity, and
   nothing forwards the old value, so a tray or record still holding it falls back to matching by
   filament type.
 - **I need to rename a filament.** Rename the presets (adding `renamed_from`, which keeps the
-  preset *name* resolving), then `--generate --vendor <Vendor>` (preview with `--dry-run`), then
-  `--update-snapshot`. The id follows the new filament name; as with any identity fix, the old id
+  preset *name* resolving), then `generate-id --vendor <Vendor>` (preview with `--dry-run`). The
+  id follows the new filament name; as with any identity fix, the old id
   is not forwarded.
-- **Can I reuse a `QD_*` id for a Qidi profile?** No — nobody can. It is the device protocol's
-  own id space: the box composes those values at runtime and no preset carries one. Author
-  Qidi filaments like any other vendor's.
-- **CI says my filament needs an id.** Run `python scripts/orca_id_tool.py --generate`, then
-  `--update-snapshot`, and commit both diffs. Do not type an id by hand.
+- **Can I reuse a `QD_*` id for a Qidi profile?** No — it is not a mint, so it is not a
+  `filament_id`. Those values are composed by the box at runtime, and no preset carries one.
+  Author Qidi filaments like any other vendor's.
+- **CI says my filament needs an id.** Run `python scripts/orca_profile_tool.py generate-id` and
+  commit the result. Do not type an id by hand.
 
 For general profile authoring, see the profile development guide on the
 [OrcaSlicer wiki](https://www.orcaslicer.com/wiki).
diff --git a/docs/HLSD/wipe-inward.md b/docs/HLSD/wipe-inward.md
new file mode 100644
index 0000000000..9f1c617cc3
--- /dev/null
+++ b/docs/HLSD/wipe-inward.md
@@ -0,0 +1,170 @@
+# Wipe inward — High Level Design
+
+## Purpose and scope
+
+Wipe inward reduces reheating of fresh plastic and visible seam artifacts by
+moving the hot nozzle toward adjacent printed material during the external-wall
+wipe. Wipe marks are especially visible at layer heights below 0.1 mm.
+The option applies only to wipes after external walls, including walls around
+holes. It does not offset wipes after inner walls, infill or supports. For an
+outer contour the move is inward; for a hole it is away from the hole, toward
+the surrounding material. The path must remain supported by material that is
+already present when the wipe executes.
+
+The operation belongs to G-code generation. It uses extrusion paths, their actual
+widths and their print order. Changing its settings invalidates G-code export
+while preserving the sliced geometry.
+
+## Settings and eligibility
+
+`wipe_inward` defaults to disabled and requires Wipe while retracting to be
+enabled for the active filament. `wipe_inward_distance` defaults to 50% of the
+actual external-wall extrusion width; it also accepts an absolute distance in
+millimeters. Using the path width makes Auto width and Arachne's variable widths
+meaningful. The effective offset is limited by that width and the spacing to the
+adjacent wall. A zero distance disables the offset.
+
+Only external perimeters with a suitable, previously printed inner perimeter
+are eligible. A configured wall count alone cannot establish eligibility:
+the local geometry may contain fewer walls, and walls scheduled later do not
+provide support. Outer/Inner wall order therefore normally retains the regular
+wipe path.
+
+Retraction and pressure advance calibrations disable inward wiping so it cannot
+mask the behavior being measured. The calibration settings turn it off, and
+G-code generation enforces this even if a profile or object override enables it.
+
+## Path selection and support
+
+The planner identifies an adjacent inner perimeter on the material side of the
+outgoing wall. Contour winding and the distinction between outer contours and
+holes establish a preferred direction; local printed geometry resolves ambiguous
+or self-touching contours.
+
+Candidate paths offset or translate the portion needed for the configured wipe
+distance. A wide seam gap can prevent a supported forward path; following the
+incoming printed wall backwards is also a candidate. If translating that wall
+cannot provide a complete wipe around a curve, the planner tries an offset of
+the reversed wall. Direction checks allow coordinate-rounding error at a
+perpendicular entry, while rejecting actual backtracking. The planner checks the
+complete executable path, including its connector from the nozzle position,
+against the current and earlier printed perimeters. Nearby endpoints alone do
+not establish support across a gap.
+
+Each region accumulates its printed perimeter prefix once, in extrusion order.
+Every entity contributes its geometry only after it is printed, and the prefix
+is discarded when the region ends. This collection is skipped when inward wiping
+is disabled or its configured distance is zero. A mixed inner-wall loop remains
+an eligible target even when its first path is an overhang: ordinary inner-wall
+paths elsewhere in the loop identify it. Likewise, an external loop with an
+overhanging start remains eligible when other segments identify the external
+wall. It is available for support checks but is not an inner-wall target.
+Candidate-specific support filtering and AABB trees are built only for eligible
+external loops, then reused across their candidate paths.
+
+Material-side validation applies with or without a seam gap. Along each
+candidate, local wall normals point toward the adjacent printed inner wall;
+samples on the opposite side are rejected even when they remain close enough
+to the external wall to pass the support check. This uses the open wall geometry
+without treating it as a closed polygon. Full paths at a zero-gap seam also
+retain clearance from the external wall after their initial connector. At a
+clipped corner, another branch can be closer than the requested offset, so
+material-side and support checks apply without that additional clearance rule.
+
+An accepted candidate replaces the stored wipe path as a whole. A short direct
+inward move is also eligible when longer candidates fail validation. It may
+waive full wall clearance, but must pass the material-side check. Its initial
+direction is checked from the actual nozzle position after any loop pre-move;
+the original wall endpoint is retained separately for intersection checks. It takes
+priority over the alternate offset when the preferred and translated paths
+are unusable. A longer reversed path may replace the selected candidate only
+when its distance to the target inner wall is no worse within tolerance.
+
+## Fallback to the regular wipe
+
+The original wipe path is retained when:
+
+- No suitable adjacent inner wall has already been printed near the seam. This
+  includes single-wall areas, locally missing inner walls and normally Outer/Inner
+  wall order. A distant wall or a wall on the air side does not qualify.
+- The requested or available offset, or the configured wipe distance, is zero
+  or too small at the geometry's coordinate precision.
+- Degenerate geometry prevents construction of a usable candidate, or all
+  candidates fail the checks for printed support, direction, wall clearance or
+  the connector from the actual nozzle position. This can occur at tight corners,
+  narrow features or seam gaps.
+
+Corners and seam gaps do not automatically trigger fallback: an offset,
+translated, reversed or short direct inward path may still be valid. The regular
+wipe is retained only when no candidate is accepted.
+
+Fallback uses the path and retraction rules for `wipe_inward` disabled.
+Wipe while retracting must still be enabled for a wipe to occur; `wipe_on_loops`
+remains controlled by its own setting.
+
+## Interaction with Wipe on loop
+
+`wipe_on_loops` is an independent option that makes a short move before leaving
+an external loop. It can operate with `wipe_inward` disabled. When both options
+are enabled, its destination is the starting position for the inward wipe.
+
+The loop move samples the outgoing and incoming paths by distance across path
+boundaries. The sampling distance is bounded by the nozzle diameter and one
+quarter of the total path length. It samples the outgoing path at up to 20% of
+the nozzle diameter and rotates that point around the seam through one third
+of the material-side corner angle. For a closed square outer contour, this
+produces a move of 20% of the nozzle diameter at 30 degrees into the corner.
+Coincident samples or degenerate angles suppress the move.
+
+The nozzle position stored by G-code generation must match the emitted loop
+move. Both travel planning and wipe execution depend on this position, including
+when Wipe inward is disabled.
+
+With a seam gap, a loop move may advance past the inward offset's original entry.
+If that alone makes the connector backtrack, the entry advances to the nozzle's
+projection on the offset. The planner extends the source as needed to preserve
+the configured wipe length and validates the new connector and complete path.
+Joins that already backtrack across the seam gap are not adjusted this way.
+
+## Execution and retraction
+
+The stored wipe path uses a sentinel first point. Execution starts from the
+actual nozzle position and proceeds to the second stored point. Path selection,
+support validation and wipe-length calculation must all use this same executable
+geometry, especially after a Wipe on loop move.
+
+An accepted inward path executes at the end of the external loop, after any
+Wipe on loop move, without retracting filament. It consumes the stored path and
+updates the nozzle position before travel planning. A short travel to the next
+wall cannot discard this wipe or force a retraction or Z-hop. Subsequent travel
+uses the normal minimum-travel threshold and retraction/lift settings from the
+new position. The regular wipe, including fallback, remains deferred until a
+normal retraction uses it.
+
+Retraction is divided into portions before, during and after wiping. The amount
+that can be retracted during the wipe depends on its executable length, wipe
+speed and the active filament's retraction speed. Fractional retraction speeds
+are retained in this calculation. For a 2 mm wipe at 100 mm/s and a retraction
+speed of 25.5 mm/s, the wipe can retract 0.51 mm. With a total retraction of 0.8 mm
+and both before/after percentages set to zero, the remaining 0.29 mm is retracted
+before wiping. This split applies to regular deferred wipes, including fallback;
+an accepted inward wipe executes separately without retraction.
+
+## Implementation and verification
+
+- [GCode.cpp](../../src/libslic3r/GCode.cpp) integrates path selection, nozzle
+  position and retraction; [Print.cpp](../../src/libslic3r/Print.cpp) controls
+  invalidation, and [PrintConfig.cpp](../../src/libslic3r/PrintConfig.cpp) defines
+  the settings.
+- [WipePathHelpers](../../src/libslic3r/GCode/WipePathHelpers.hpp) implements path
+  sampling, offset selection and support checks.
+- [Geometry tests](../../tests/libslic3r/test_wipe_path.cpp) cover support,
+  degenerate paths, contour and hole orientations, and exact loop-move geometry
+  across path subdivisions.
+- [FFF tests](../../tests/fff_print/test_wipe.cpp) cover emitted trajectories,
+  fallback, minimum-travel retraction and Z-hop rules, and export invalidation.
+  With Wipe inward disabled, they check the loop move's direction and magnitude
+  for Classic and Arachne, the subsequent wipe's start and length, and fractional
+  retraction splitting in absolute and relative E modes.
+  Loop-move checks use reserved role/wipe markers and extrusion state, and run
+  with human-readable G-code comments both enabled and disabled.
diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot
index db62fb4443..32269c0e6d 100644
--- a/localization/i18n/OrcaSlicer.pot
+++ b/localization/i18n/OrcaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -2293,15 +2293,6 @@ msgstr ""
 msgid "%s has been removed."
 msgstr ""
 
-msgid "Switching application language"
-msgstr ""
-
-msgid "Select the language"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr ""
@@ -3488,10 +3479,12 @@ msgstr ""
 msgid "Switch track at Filament Track Switch"
 msgstr ""
 
-msgid "The maximum temperature cannot exceed "
+#, possible-c-format, possible-boost-format
+msgid "The maximum temperature cannot exceed %d"
 msgstr ""
 
-msgid "The minmum temperature should not be less than "
+#, possible-c-format, possible-boost-format
+msgid "The minimum temperature should not be less than %d"
 msgstr ""
 
 msgid "Type to filter..."
@@ -4324,6 +4317,12 @@ msgid ""
 "Error message: %1%"
 msgstr ""
 
+#, possible-boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+
 #, possible-boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr ""
@@ -4571,6 +4570,9 @@ msgid ""
 "No  - Cancel enabling spiral mode"
 msgstr ""
 
+msgid "N/A"
+msgstr ""
+
 msgid "Printing"
 msgstr ""
 
@@ -4993,10 +4995,10 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr ""
 
 #, possible-c-format, possible-boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr ""
+
+msgid "%"
 msgstr ""
 
 #, possible-boost-format
@@ -5019,22 +5021,16 @@ msgstr ""
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr ""
 
-msgid "N/A"
-msgstr ""
-
 msgid "System agents"
 msgstr ""
 
-msgid "No plugin selected"
-msgstr ""
-
 msgid "Add plugin"
 msgstr ""
 
-msgid "Select plugin"
+msgid "Remove plugin"
 msgstr ""
 
-msgid "Remove plugin"
+msgid "No plugin selected"
 msgstr ""
 
 msgid "Configure"
@@ -5290,13 +5286,16 @@ msgstr ""
 msgid "Regroup filament"
 msgstr ""
 
-msgid "up to"
+#, possible-boost-format
+msgid "up to %1% mm"
 msgstr ""
 
-msgid "above"
+#, possible-boost-format
+msgid "above %1% mm"
 msgstr ""
 
-msgid "from"
+#, possible-boost-format
+msgid "from %1% to %2% mm"
 msgstr ""
 
 msgid "Usage"
@@ -5647,7 +5646,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, possible-boost-format
+#, possible-c-format, possible-boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr ""
 
@@ -5951,6 +5950,12 @@ msgstr ""
 msgid "Save current project as"
 msgstr ""
 
+msgid "Publish 3MF"
+msgstr ""
+
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr ""
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr ""
 
@@ -7178,6 +7183,12 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
 
+msgid "This setting does not specify a plugin capability type."
+msgstr ""
+
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr ""
+
 msgid "Plugin Selection"
 msgstr ""
 
@@ -7696,6 +7707,12 @@ msgstr ""
 msgid "Customized Preset"
 msgstr ""
 
+msgid "Some published settings could not be applied:"
+msgstr ""
+
+msgid "Some filament slots were changed:"
+msgstr ""
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr ""
 
@@ -8074,6 +8091,17 @@ msgstr ""
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr ""
 
+msgid "Publish 3MF file as:"
+msgstr ""
+
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+
+msgid "Publish"
+msgstr ""
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr ""
 
@@ -8271,9 +8299,6 @@ msgstr ""
 msgid "Language selection"
 msgstr ""
 
-msgid "Switching application language while some presets are modified."
-msgstr ""
-
 msgid "Asia-Pacific"
 msgstr ""
 
@@ -8367,6 +8392,9 @@ msgstr ""
 msgid "General"
 msgstr ""
 
+msgid "Language"
+msgstr ""
+
 msgid "Metric"
 msgstr ""
 
@@ -8756,9 +8784,6 @@ msgstr ""
 msgid "Dimmed layer brightness"
 msgstr ""
 
-msgid "%"
-msgstr ""
-
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
 "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option."
@@ -9124,9 +9149,6 @@ msgstr ""
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr ""
 
-msgid "Publish"
-msgstr ""
-
 msgid "Publish was canceled"
 msgstr ""
 
@@ -9142,6 +9164,63 @@ msgstr ""
 msgid "Jump to webpage"
 msgstr ""
 
+msgid "Material"
+msgstr ""
+
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+#, possible-boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr ""
+
+#, possible-boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
+msgid "Publish 3MF..."
+msgstr ""
+
+msgid "Select which settings to be published in the 3MF file"
+msgstr ""
+
+msgid "Publish 3MF Wiki"
+msgstr ""
+
+msgid "Publish 3MF Video Guide"
+msgstr ""
+
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
+msgid "Full Publish"
+msgstr ""
+
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr ""
+
+msgid "Filter non-selected"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "Save %s as"
 msgstr ""
@@ -9158,6 +9237,9 @@ msgstr ""
 msgid "Detach from parent"
 msgstr ""
 
+msgid "Save without parent"
+msgstr ""
+
 msgid "Unique preset"
 msgstr ""
 
@@ -9807,9 +9889,15 @@ msgstr ""
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr ""
 
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr ""
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr ""
 
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr ""
+
 msgid "Still print by object?"
 msgstr ""
 
@@ -10158,9 +10246,6 @@ msgstr ""
 msgid "Printable space"
 msgstr ""
 
-msgid "Printer Agent"
-msgstr ""
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr ""
 
@@ -10520,12 +10605,6 @@ msgstr ""
 msgid "Capabilities"
 msgstr ""
 
-msgid "Left: "
-msgstr ""
-
-msgid "Right: "
-msgstr ""
-
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
@@ -11329,15 +11408,19 @@ msgstr ""
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr ""
 
+msgid "Downloading new vendor profile(s): "
+msgstr ""
+
+#, possible-boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr ""
+
+msgid "Failed to download vendor profile(s): "
+msgstr ""
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr ""
 
-msgid "Configuration package: "
-msgstr ""
-
-msgid " updated to "
-msgstr ""
-
 msgid "Open G-code file:"
 msgstr ""
 
@@ -11393,10 +11476,12 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr ""
 
-msgid "Grouping error: "
+#, possible-boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
 msgstr ""
 
-msgid " can not be placed in the "
+#, possible-boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
 msgstr ""
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -11510,6 +11595,9 @@ msgstr ""
 msgid "%1% is too tall, and collisions will be caused."
 msgstr ""
 
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr ""
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr ""
 
@@ -11832,6 +11920,9 @@ msgstr ""
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr ""
 
+msgid "Printer Agent"
+msgstr ""
+
 msgid "Select the network agent implementation for printer communication."
 msgstr ""
 
@@ -12680,6 +12771,9 @@ msgstr ""
 msgid "Concentric"
 msgstr ""
 
+msgid "Spiral Inset"
+msgstr ""
+
 msgid "Hilbert Curve"
 msgstr ""
 
@@ -12749,7 +12843,7 @@ msgid "Top surface fill order"
 msgstr ""
 
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
@@ -12758,7 +12852,7 @@ msgid "Bottom surface fill order"
 msgstr ""
 
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
@@ -12846,6 +12940,12 @@ msgstr ""
 msgid "Clockwise"
 msgstr ""
 
+msgid "Distance to rod"
+msgstr ""
+
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr ""
+
 msgid "Height to rod"
 msgstr ""
 
@@ -14796,6 +14896,15 @@ msgstr ""
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr ""
 
+msgid "Print unsupported walls last"
+msgstr ""
+
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+
 msgid "Outer walls"
 msgstr ""
 
@@ -15205,6 +15314,27 @@ msgstr ""
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr ""
 
+msgid "Wipe inward"
+msgstr ""
+
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+
+msgid "Wipe inward distance"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+
 msgid "Wipe before external loop"
 msgstr ""
 
@@ -15445,7 +15575,7 @@ msgstr ""
 msgid "No sparse layers (beta)"
 msgstr ""
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
 msgstr ""
 
 msgid "Prime all printing extruders"
@@ -15466,6 +15596,24 @@ msgstr ""
 msgid "Cyclic"
 msgstr ""
 
+msgid "Cyclic order"
+msgstr ""
+
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+
+msgid "Apply cyclic order to first layer"
+msgstr ""
+
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+
 msgid "Slice gap closing radius"
 msgstr ""
 
@@ -15475,9 +15623,6 @@ msgstr ""
 msgid "Slicing Mode"
 msgstr ""
 
-msgid "Other"
-msgstr ""
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr ""
 
@@ -16380,6 +16525,12 @@ msgstr ""
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr ""
 
+msgid "Strict mode"
+msgstr ""
+
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr ""
+
 msgid "Normative check"
 msgstr ""
 
@@ -16392,10 +16543,22 @@ msgstr ""
 msgid "This outputs the model’s information."
 msgstr ""
 
+msgid "Inspect mesh (JSON to stdout)"
+msgstr ""
+
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr ""
+
+msgid "Inspect paint (JSON to stdout)"
+msgstr ""
+
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr ""
+
 msgid "Export Settings"
 msgstr ""
 
-msgid "This exports settings to a file."
+msgid "This exports settings to a file. Use - to write them to stdout."
 msgstr ""
 
 msgid "Send progress to pipe"
@@ -16452,6 +16615,24 @@ msgstr ""
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
+msgid "Ground largest face"
+msgstr ""
+
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
+msgid "Ground face by normal"
+msgstr ""
+
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
+msgid "Ground face at point"
+msgstr ""
+
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
 msgid "Scale the model by a float factor."
 msgstr ""
 
@@ -19337,6 +19518,15 @@ msgstr ""
 msgid "Skipping objects."
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
+msgid "Ratio"
+msgstr ""
+
 msgid "Select Filament"
 msgstr ""
 
@@ -19573,10 +19763,12 @@ msgstr ""
 msgid "Drying-Dehumidifying"
 msgstr ""
 
-msgid " maximum drying temperature is "
+#, possible-c-format, possible-boost-format
+msgid "%s maximum drying temperature is %d°C."
 msgstr ""
 
-msgid " minimum drying temperature is "
+#, possible-c-format, possible-boost-format
+msgid "%s minimum drying temperature is %d°C."
 msgstr ""
 
 msgid "This filament may not be completely dried."
diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po
index 2b42f300ac..e1a06108b6 100644
--- a/localization/i18n/ca/OrcaSlicer_ca.po
+++ b/localization/i18n/ca/OrcaSlicer_ca.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2522,15 +2522,6 @@ msgstr "Hi ha una actualització disponible. Obriu el quadre de diàleg del paqu
 msgid "%s has been removed."
 msgstr "%s s'ha eliminat."
 
-msgid "Switching application language"
-msgstr "Canvi d'idioma de l'aplicació"
-
-msgid "Select the language"
-msgstr "Seleccioneu l'idioma"
-
-msgid "Language"
-msgstr "Idioma"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3784,11 +3775,15 @@ msgstr "Retirar el filament actual al Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Canviar de via al Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "La temperatura màxima no pot superar "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "La temperatura màxima no pot superar %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "La temperatura mínima no hauria de ser inferior a "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "La temperatura mínima no hauria de ser inferior a %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4689,6 +4684,15 @@ msgstr ""
 "Error en copiar el codi-G temporal al codi-G de sortida. Potser la targeta SD està bloquejada contra escriptura?\n"
 "Missatge d'error: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Ha fallat la còpia del codi-G temporal al codi-G de sortida.\n"
+"Missatge d'error: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Error en copiar el codi-G temporal al codi-G de sortida. Hi pot haver un problema amb el dispositiu de destinació, intenteu exportar novament o utilitzeu un dispositiu diferent. El codi-G de sortida malmès és a %1%.tmp."
@@ -4995,6 +4999,9 @@ msgstr ""
 "Sí: canviar aquesta configuració i activar el mode d'espiral automàticament\n"
 "No - Renunciar a utilitzar el mode espiral aquesta vegada"
 
+msgid "N/A"
+msgstr "N/D"
+
 msgid "Printing"
 msgstr "Imprimint"
 
@@ -5427,14 +5434,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "El valor %s està fora de rang. El rang vàlid és de %d a %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"És %s%% or %s %s?\n"
-"SÍ per %s%%.\n"
-"NO per %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "És %s%% or %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5456,29 +5460,22 @@ msgstr "Patró no vàlid. Utilitzeu N, N#K, o una llista separada per comes amb
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Format no vàlid. Format vectorial esperat: \"%1%\""
 
-msgid "N/A"
-msgstr "N/D"
-
 # AI Translated
 msgid "System agents"
 msgstr "Agents del sistema"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Cap connector seleccionat"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Afegir connector"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Seleccionar connector"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Eliminar connector"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Cap connector seleccionat"
+
 # AI Translated
 msgid "Configure"
 msgstr "Configurar"
@@ -5737,14 +5734,20 @@ msgstr "Estableix a l'òptim"
 msgid "Regroup filament"
 msgstr "Reagrupa filaments"
 
-msgid "up to"
-msgstr "fins a"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "fins a %1% mm"
 
-msgid "above"
-msgstr "sobre"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "per sobre de %1% mm"
 
-msgid "from"
-msgstr "des de"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "de %1% a %2% mm"
 
 msgid "Usage"
 msgstr "Ús"
@@ -6107,7 +6110,7 @@ msgstr "Volum:"
 msgid "Size:"
 msgstr "Mida:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "S'han trobat conflictes de rutes gcode a la capa %d, Z = %.2lfmm. Si us plau, separeu els objectes conflictius més lluny ( %s <-> %s )."
 
@@ -6421,6 +6424,14 @@ msgstr "Desa el projecte com a"
 msgid "Save current project as"
 msgstr "Desar el projecte actual com"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publicar 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exportar un fitxer 3MF amb la configuració seleccionada incrustada"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importar 3MF STL/STEP/SVG/OBJ/AMF"
 
@@ -7704,6 +7715,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inferior"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Aquesta opció no especifica cap tipus de capacitat del connector."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Aquesta opció especifica un tipus de capacitat del connector no reconegut: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Selecció de connectors"
@@ -8275,6 +8294,14 @@ msgstr "Confirmeu que els Codis-G d'aquests perfils són segurs per evitar danys
 msgid "Customized Preset"
 msgstr "Perfil personalitzat"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "No s'han pogut aplicar algunes opcions publicades:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "S'han canviat algunes ranures de filament:"
+
 # AI Translated
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Els noms dels components dins del fitxer STEP no tenen format UTF-8!"
@@ -8687,6 +8714,21 @@ msgstr "Desa el fitxer Laminat com a:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "El fitxer %s s'ha enviat a l'emmagatzematge de la impressora i es pot visualitzar a la impressora."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publicar el fitxer 3MF com a:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"No s'ha pogut exportar el fitxer 3MF publicat.\n"
+"Comproveu si la carpeta existeix en línia o si altres programes tenen el fitxer obert."
+
+msgid "Publish"
+msgstr "Publicar"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "El tipus de broquet no està establert. Establiu el broquet i torneu-ho a provar."
 
@@ -8901,9 +8943,6 @@ msgstr "Voleu continuar?"
 msgid "Language selection"
 msgstr "Selecció d'idiomes"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Canviant l'idioma de l'aplicació mentre es modifiquen alguns perfils."
-
 msgid "Asia-Pacific"
 msgstr "Àsia-Pacífic"
 
@@ -9009,6 +9048,9 @@ msgstr "Ruta de la Instància Actual: "
 msgid "General"
 msgstr "General"
 
+msgid "Language"
+msgstr "Idioma"
+
 msgid "Metric"
 msgstr "Mètric"
 
@@ -9474,9 +9516,6 @@ msgstr "En desplaçar el control lliscant de capes a la previsualització lamina
 msgid "Dimmed layer brightness"
 msgstr "Brillantor de les capes enfosquides"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9880,9 +9919,6 @@ msgstr "Anar a la pàgina web de publicació de models"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Nota: La preparació pot trigar uns quants minuts. Si us plau, sigui pacient."
 
-msgid "Publish"
-msgstr "Publicar"
-
 msgid "Publish was canceled"
 msgstr "La publicació ha estat cancel·lada"
 
@@ -9898,6 +9934,81 @@ msgstr "Carregant dades"
 msgid "Jump to webpage"
 msgstr "Anar a la pàgina web"
 
+# AI Translated
+msgid "Material"
+msgstr "Material"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filament mixt"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Alguns filaments mixtos depenen de filaments que no es publicaran:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (mixt)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% necessita %2%, que no està activat."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% necessita %2%, el material del qual no es publicarà."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Per publicar un filament mixt, activeu tots els filaments que fa servir i trieu Publicació completa o compliu el seu requisit de Tipus."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Publicar igualment"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publicar 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Seleccioneu quines opcions es publicaran al fitxer 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki de Publicar 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Guia en vídeo de Publicar 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filament mixt - es publica com un conjunt quan se selecciona \"Activar\" a dalt"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publicar aquest filament mixt i activar + publicar completament els seus filaments components"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publicar aquesta ranura de filament al fitxer 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Publicació completa"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Incrustar tot el filament d'aquesta ranura al fitxer 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrar els no seleccionats"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Desar %s com a"
@@ -9915,6 +10026,10 @@ msgstr "Copia en aquest perfil tots els valors heretats del perfil pare i elimin
 msgid "Detach from parent"
 msgstr "Desvincula del pare"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Desar sense pare"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Perfil únic"
@@ -10622,9 +10737,17 @@ msgstr "Es necessita una torre de purga per a la detecció d'acumulació. Pot ha
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Activar tant l'alçada Z precisa com la torre de purga pot causar errors de tall. Voleu activar l'alçada Z precisa igualment?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "El timelapse suau necessita una Torre de Purga a cada capa, cosa que no és compatible amb \"Sense capes poc denses\". S'ha desactivat \"Sense capes poc denses\"."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "La Torre de Purga és necessària per a un timelapse suau. Pot haver-hi defectes en el model sense Torre de Purga. Vols habilitar la Torre de Purga?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Sense capes poc denses\" no és compatible amb el timelapse suau, que necessita una Torre de Purga a cada capa. El timelapse ha canviat al mode tradicional."
+
 msgid "Still print by object?"
 msgstr "Continuar imprimint per objecte?"
 
@@ -11002,9 +11125,6 @@ msgstr "Perfils de processos compatibles"
 msgid "Printable space"
 msgstr "Espai imprimible"
 
-msgid "Printer Agent"
-msgstr "Agent de la impressora"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Seleccioneu la implementació de l'agent de xarxa per a la comunicació amb la impressora. Els agents disponibles es registren a l'inici."
 
@@ -11425,14 +11545,6 @@ msgstr "Nombre d'extrusors"
 msgid "Capabilities"
 msgstr "Capacitats"
 
-# AI Translated
-msgid "Left: "
-msgstr "Esquerra: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Dreta: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Mostra tots els perfils ( inclosos els incompatibles )"
 
@@ -12285,15 +12397,22 @@ msgstr "Reparació cancel·lada"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "La còpia del fitxer %1% a %2% ha fallat: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "S'estan descarregant perfils de fabricant nous: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Paquet de configuració: %1% actualitzat a %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "No s'han pogut descarregar els perfils de fabricant: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Cal comprovar els canvis no desats abans de les actualitzacions de configuració."
 
-msgid "Configuration package: "
-msgstr "Paquet de configuració: "
-
-msgid " updated to "
-msgstr " actualitzat a "
-
 msgid "Open G-code file:"
 msgstr "Obre el fitxer de Codi-G:"
 
@@ -12358,11 +12477,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "L'Input Shaping només és compatible amb Klipper, RepRapFirmware i Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Error d'agrupació: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Error d'agrupació: %1% no es pot col·locar al broquet esquerre"
 
-msgid " can not be placed in the "
-msgstr " no es pot col·locar al "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Error d'agrupació: %1% no es pot col·locar al broquet dret"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12477,6 +12600,10 @@ msgstr "%1% està massa a prop d'altres i es poden produir col·lisions."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% és massa alt i es provocaran col·lisions."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "La posició relativa del model i la Torre de Purga no compleix els requisits de la funció \"Sense capes poc denses\". Ajusteu-ne les posicions relatives, reduïu l'alçada del model o desactiveu \"Sense capes poc denses\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " està massa a prop de l'àrea d'exclusió, pot haver-hi col·lisions en imprimir."
 
@@ -12841,6 +12968,9 @@ msgstr "Utilitzar 3MF en lloc de G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Activeu-ho si la impressora accepta un fitxer 3MF com a treball d'impressió. Quan està activat, Orca Slicer envia el fitxer laminat com a .gcode.3mf, en lloc d'un fitxer .gcode simple."
 
+msgid "Printer Agent"
+msgstr "Agent de la impressora"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Seleccioneu la implementació de l'agent de xarxa per a la comunicació amb la impressora."
 
@@ -13917,6 +14047,10 @@ msgstr "Alineat Rectilini"
 msgid "Concentric"
 msgstr "Concèntric"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Espiral interior"
+
 msgid "Hilbert Curve"
 msgstr "Corba de Hilbert"
 
@@ -14008,13 +14142,13 @@ msgstr "Ordre d'emplenament de la superfície superior"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direcció en què s'omplen les superfícies superiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n"
-"Cap a fora comença al centre de la superfície, de manera que l'excés de material es desplaça cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n"
-"Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció."
+"Direcció en què s'omplen les superfícies superiors quan es fa servir un patró basat en el centre (Concèntric, Espiral interior, Acords d'Arquimedes, Octograma en Espiral).\n"
+"Cap a fora comença al centre de la superfície, de manera que el material sobrant s'empeny cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n"
+"Per defecte fa servir l'ordre del camí més curt, que pot anar en qualsevol dels dos sentits."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -14022,13 +14156,13 @@ msgstr "Ordre d'emplenament de la superfície inferior"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direcció en què s'omplen les superfícies inferiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n"
-"Cap a dins comença cada superfície amb les corbes exteriors més amples, cosa que millora l'adherència de la capa inicial en plaques on les corbes tancades del centre poden no adherir-se. Cap a fora comença al centre i desplaça l'excés de material cap a la vora.\n"
-"Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció."
+"Direcció en què s'omplen les superfícies inferiors quan es fa servir un patró basat en el centre (Concèntric, Espiral interior, Acords d'Arquimedes, Octograma en Espiral).\n"
+"Cap a dins comença cada superfície per les corbes exteriors més amples, cosa que millora l'adhesió de la capa inicial en llits on les corbes tancades del centre poden no agafar-se. Cap a fora comença al centre i empeny el material sobrant cap a la vora.\n"
+"Per defecte fa servir l'ordre del camí més curt, que pot anar en qualsevol dels dos sentits."
 
 msgid "Internal solid infill pattern"
 msgstr "Patró de farciment sòlid intern"
@@ -14133,6 +14267,14 @@ msgstr "En sentit contrari a les agulles del rellotge"
 msgid "Clockwise"
 msgstr "En el sentit de les agulles del rellotge"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Distància a la barra"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Distància horitzontal de la punta del broquet a la vora més llunyana de la barra. Es fa servir per evitar col·lisions en la impressió per objecte."
+
 msgid "Height to rod"
 msgstr "Alçada a la tija"
 
@@ -16351,6 +16493,20 @@ msgstr "Detectar voladís de perímetre"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Detectar el percentatge de voladís en relació amb l'amplada de la línia i utilitzar una velocitat diferent per imprimir. Per al voladís del 100%%, s'utilitza la velocitat de pont."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Imprimir al final els perímetres sense suport"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Els bucles de perímetre que queden completament a l'aire s'imprimeixen quan alguna cosa els pot sostenir:\n"
+"s'extrudeixen després dels altres perímetres de la seva illa, començant pel més interior, sigui quin sigui l'ordre de perímetres.\n"
+"Un bucle que només poden ancorar els ponts d'aquesta capa espera que s'imprimeixin aquests ponts, mentre que un bucle que va al costat d'un perímetre amb suport manté el seu lloc abans del farciment, que el necessita com a ancoratge."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Perímetres exteriors"
@@ -16799,6 +16955,39 @@ msgstr "Neteja en bucles"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Per minimitzar la visibilitat de la costura en una extrusió de bucle tancat, s'executa un petit moviment cap a l'interior abans que l'extrusora surti del bucle."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Netejar cap a dins"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Només s'aplica als perímetres exteriors, inclosos els contorns dels forats. Durant la neteja mou el broquet calent cap als perímetres interiors ja impresos per reduir el reescalfament del plàstic acabat d'imprimir i les marques de costura.\n"
+"\n"
+"És especialment útil amb alçades de capa per sota de 0,1 mm, on les marques de neteja es veuen més.\n"
+"\n"
+"Fa servir la neteja normal si no hi ha cap perímetre interior contigu ja imprès (zones d'un sol perímetre o ordre de perímetres Exterior/Interior) o si no es troba cap trajectòria cap a dins amb suport, per exemple a cantonades tancades o a buits de la costura."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Distància de neteja cap a dins"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Distància que es desplaça la trajectòria de neteja allunyant-se del perímetre exterior, indicada en mil·límetres o com a percentatge de l'amplada d'extrusió real del perímetre exterior.\n"
+"\n"
+"Per exemple, 50% desplaça la trajectòria la meitat de l'amplada del perímetre exterior. El desplaçament efectiu està limitat tant per l'amplada real del perímetre exterior com per l'espai disponible fins al perímetre contigu, de manera que els valors per sobre de 100% o una distància absoluta equivalent no tenen cap efecte addicional. Poseu-hi 0 per desactivar el desplaçament."
+
 msgid "Wipe before external loop"
 msgstr "Netejar abans del bucle extern"
 
@@ -17063,8 +17252,9 @@ msgstr "Recull la nova eina sense esperar que arribi a la temperatura d'impressi
 msgid "No sparse layers (beta)"
 msgstr "Sense capes poc denses( beta )"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Si està habilitat, la Torre de Purga no s'imprimeix en capes sense canvis d'eina. En capes amb canvi d'eina, l'extrusor es desplaçarà cap avall per imprimir la Torre de Purga. L'usuari és responsable de garantir que no hi hagi col·lisió amb la impressió."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Si s'activa, la Torre de Purga no s'imprimirà a les capes sense canvis d'eina. A les capes amb un canvi d'eina, l'extrusor baixarà per imprimir la Torre de Purga, de manera que la torre queda per sota del model i el capçal ha de baixar fins a ella. Es rebutgen les disposicions en què això xocaria amb un objecte ja imprès. No té cap efecte amb el timelapse suau ni amb la detecció d'obstruccions al broquet, que necessiten una torre a cada capa."
 
 msgid "Prime all printing extruders"
 msgstr "Purgar tots els extrusors d'impressió"
@@ -17090,6 +17280,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cíclic"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ordre cíclic"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Seqüència de filaments personalitzada que fa servir l'ordre cíclic de canvis d'eina, com a números de filament separats per comes (p. ex. \"3,2,1,4\").\n"
+"Cada capa imprimeix els seus filaments seguint aquesta seqüència; els filaments que no hi consten s'imprimeixen al final, en ordre ascendent.\n"
+"Deixeu-ho buit per recórrer els filaments en ordre ascendent."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Aplicar l'ordre cíclic a la capa inicial"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Aplica l'ordre cíclic de canvis d'eina també a la capa inicial.\n"
+"Per defecte està desactivat, perquè la capa inicial s'ordena en lloc d'això per aconseguir la millor adhesió al llit: els filaments que imprimeixen detalls petits i fràgils de la capa inicial s'imprimeixen al final, de manera que els canvis d'eina i els recorreguts posteriors tenen menys probabilitats d'arrencar aquestes peces mal ancorades. Aquest ordre de la capa inicial també respecta una seqüència de filaments personalitzada per a la capa inicial quan se n'ha definit una. L'avantatge de l'ordre cíclic (els canvis d'eina addicionals donen a cada capa més temps per refredar-se) no s'aplica a la capa inicial, que s'imprimeix a poc a poc i calenta per afavorir l'adhesió.\n"
+"Activeu-ho només si necessiteu exactament la mateixa seqüència d'eines a totes les capes, inclosa la primera, a costa d'aquesta optimització de l'adhesió."
+
 msgid "Slice gap closing radius"
 msgstr "Radi de tancament dels buits en laminar"
 
@@ -17099,9 +17317,6 @@ msgstr "Les esquerdes de menys de dues vegades el radi de tancament de buits s'o
 msgid "Slicing Mode"
 msgstr "Mode de laminat"
 
-msgid "Other"
-msgstr "Altre"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Utilitzeu \"Parell-imparell\" per als models d'avió 3DLabPrint. Utilitzeu \"Tancar forats\" per tancar tots els forats del model."
 
@@ -18119,6 +18334,14 @@ msgstr "No comprovar"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "No executar cap comprovació de validesa, com ara la comprovació de conflictes de trajectòria al Codi-G."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Mode estricte"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Surt amb un codi diferent de zero quan el llescat genera un avís no crític que altrament només es registraria, com ara un model que necessita suports mentre els suports estan desactivats. Feu-ho servir en CI o en processos automatitzats que mai no han de lliurar un llescat subtilment defectuós. Cadascun d'aquests avisos també apareix amb una classe estable a la matriu `warnings` de result.json, que només s'escriu a Linux. No es pot combinar amb --no-check, que omet la comprovació de suports."
+
 msgid "Normative check"
 msgstr "Comprovació normativa"
 
@@ -18131,11 +18354,28 @@ msgstr "Informació del model de sortida"
 msgid "This outputs the model’s information."
 msgstr "Emet la informació del model."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Inspeccionar la malla (JSON a stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Escriu a stdout un resum JSON de cada objecte carregat i després surt: les seves capses contenidores i les cares de l'envolupant convexa sobre les quals es pot recolzar, amb les normals, àrees i centres corresponents. Aquestes són les cares entre les quals trien les opcions --ground-*. Alternativa llegible per màquina a --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Inspeccionar el pintat (JSON a stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Escriu un resum JSON estructurat de cada capa pintada (suports, costura, color MMU, pell difusa) ja desada al model carregat — nombre de facetes, àrea de superfície i capsa contenidora local a la malla per a cada estat — i després surt. Alternativa llegible per màquina a obrir les eines de pintat a la interfície."
+
 msgid "Export Settings"
 msgstr "Exportar Configuració"
 
-msgid "This exports settings to a file."
-msgstr "Exporta la configuració a un fitxer."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Això exporta la configuració a un fitxer. Feu servir - per escriure-la a stdout."
 
 msgid "Send progress to pipe"
 msgstr "Envia el progrés a la canalització"
@@ -18191,6 +18431,30 @@ msgstr "Rotar al voltant de l'eix Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Angle de rotació al voltant de l'eix Y en graus."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Recolzar sobre la cara més gran"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Recolza cada objecte sobre la cara més gran de la seva envolupant convexa i el deixa caure sobre el llit. Entre cares igual de grans es conserva la que ja mira cap avall. Els objectes sense una cara prou gran per recolzar-s'hi es deixen tal com estan. Les transformacions s'apliquen en l'ordre de la línia d'ordres, de manera que es respecten les rotacions indicades abans d'aquesta opció. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Recolzar sobre la cara segons la normal"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Recolza cada objecte sobre la cara de l'envolupant convexa la normal exterior de la qual sigui més propera a la direcció NX,NY,NZ i el deixa caure sobre el llit. La direcció és en coordenades de l'objecte, que inclouen les rotacions indicades abans d'aquesta opció i coincideixen amb els eixos de la safata llevat que el fitxer d'entrada giri l'objecte. Per exemple, 1,0,0 recolza l'objecte sobre el seu costat +X. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Recolzar sobre la cara en un punt"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Recolza cada objecte sobre la cara de l'envolupant convexa que conté el punt X,Y,Z i el deixa caure sobre el llit. El punt és en coordenades de l'objecte, que inclouen les rotacions indicades abans d'aquesta opció; --inspect-mesh indica els centres de les cares en aquestes coordenades. Els objectes sense una cara així es deixen tal com estan, i l'execució falla si cap objecte en té. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació."
+
 msgid "Scale the model by a float factor."
 msgstr "Escala el model amb un factor flotant"
 
@@ -21387,6 +21651,18 @@ msgstr "Aquesta acció no es pot desfer. Continuar?"
 msgid "Skipping objects."
 msgstr "Ometent objectes."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Proporció de material"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Alçada del model"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proporció"
+
 msgid "Select Filament"
 msgstr "Seleccioneu filament"
 
@@ -21670,12 +21946,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Assecatge - Deshumidificació"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " la temperatura màxima d'assecatge és "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "La temperatura màxima d'assecatge de %s és %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " la temperatura mínima d'assecatge és "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "La temperatura mínima d'assecatge de %s és %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22121,6 +22399,97 @@ msgstr ""
 "Evitar la deformació( warping )\n"
 "Sabíeu que quan imprimiu materials propensos a deformar-se, com ara l'ABS, augmentar adequadament la temperatura del llit pot reduir la probabilitat de deformació?"
 
+#~ msgid "Other"
+#~ msgstr "Altre"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Esquerra: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Dreta: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "La temperatura màxima no pot superar "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "La temperatura mínima no hauria de ser inferior a "
+
+#~ msgid "up to"
+#~ msgstr "fins a"
+
+#~ msgid "above"
+#~ msgstr "sobre"
+
+#~ msgid "from"
+#~ msgstr "des de"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Paquet de configuració: "
+
+#~ msgid " updated to "
+#~ msgstr " actualitzat a "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Error d'agrupació: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " no es pot col·locar al "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " la temperatura màxima d'assecatge és "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " la temperatura mínima d'assecatge és "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "necessita"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "no activat"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "material no publicat"
+
+#~ msgid "Select the language"
+#~ msgstr "Seleccioneu l'idioma"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Seleccionar connector"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direcció en què s'omplen les superfícies superiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n"
+#~ "Cap a fora comença al centre de la superfície, de manera que l'excés de material es desplaça cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n"
+#~ "Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direcció en què s'omplen les superfícies inferiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n"
+#~ "Cap a dins comença cada superfície amb les corbes exteriors més amples, cosa que millora l'adherència de la capa inicial en plaques on les corbes tancades del centre poden no adherir-se. Cap a fora comença al centre i desplaça l'excés de material cap a la vora.\n"
+#~ "Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Si està habilitat, la Torre de Purga no s'imprimeix en capes sense canvis d'eina. En capes amb canvi d'eina, l'extrusor es desplaçarà cap avall per imprimir la Torre de Purga. L'usuari és responsable de garantir que no hi hagi col·lisió amb la impressió."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exporta la configuració a un fitxer."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "La visualització en directe nativa de Wayland requereix el sink de vídeo GTK de GStreamer. Instal·leu el connector gtksink per a GStreamer i reinicieu l'OrcaSlicer."
diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po
index d2ef18cd2a..9dd405673e 100644
--- a/localization/i18n/cs/OrcaSlicer_cs.po
+++ b/localization/i18n/cs/OrcaSlicer_cs.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -2482,15 +2482,6 @@ msgstr "Je k dispozici aktualizace. Otevřete dialog balíčku předvoleb a prov
 msgid "%s has been removed."
 msgstr "%s bylo odstraněno."
 
-msgid "Switching application language"
-msgstr "Přepnutí jazyka aplikace"
-
-msgid "Select the language"
-msgstr "Zvolte jazyk"
-
-msgid "Language"
-msgstr "Jazyk"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3751,11 +3742,15 @@ msgstr "Vytáhnout aktuální filament zpět na Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Přepnout dráhu na Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Maximální teplota nesmí překročit "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Maximální teplota nesmí překročit %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Minimální teplota nesmí být nižší než "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Minimální teplota nesmí být nižší než %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4649,6 +4644,15 @@ msgstr ""
 "Kopírování dočasného G-kódu do výstupního G-kódu selhalo. Možná je SD karta uzamčená pro zápis?\n"
 "Chybová zpráva: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Kopírování dočasného G-kódu do výstupního G-kódu selhalo.\n"
+"Chybová zpráva: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Kopírování dočasného G-kódu do výstupního G-kódu selhalo. Může být problém s cílovým zařízením, zkuste prosím exportovat znovu nebo použijte jiné zařízení. Poškozený výstupní G-kód je na %1%.tmp."
@@ -4953,6 +4957,10 @@ msgstr ""
 "Ano – změnit tato nastavení a automaticky povolit spirálový režim\n"
 "Ne – tentokrát nepoužít spirálový režim"
 
+# AI Translated
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Tisk"
 
@@ -5383,14 +5391,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Hodnota %s je mimo rozsah. Platný rozsah je od %d do %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Je to %s%% nebo %s %s?\n"
-"ANO pro %s%%,\n"
-"NE pro %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Je to %s%% nebo %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5412,30 +5417,22 @@ msgstr "Neplatný vzor. Použijte N, N#K nebo seznam oddělený čárkami s voli
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Neplatný formát. Očekávaný vektorový formát: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "Systémoví agenti"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Není vybrán žádný plugin"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Přidat plugin"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Vybrat plugin"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Odebrat plugin"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Není vybrán žádný plugin"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfigurovat"
@@ -5696,14 +5693,20 @@ msgstr "Nastavit optimální"
 msgid "Regroup filament"
 msgstr "Znovu seskupit filament"
 
-msgid "up to"
-msgstr "až do"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "až do %1% mm"
 
-msgid "above"
-msgstr "nad"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "nad %1% mm"
 
-msgid "from"
-msgstr "Od"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "od %1% do %2% mm"
 
 msgid "Usage"
 msgstr "Využití"
@@ -6069,7 +6072,7 @@ msgstr "Objem:"
 msgid "Size:"
 msgstr "Velikost:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Byly nalezeny konflikty drah G-kódu ve vrstvě %d, Z = %.2lf mm. Oddělte prosím konfliktní objekty více od sebe (%s <-> %s)."
 
@@ -6382,6 +6385,14 @@ msgstr "Uložit projekt jako"
 msgid "Save current project as"
 msgstr "Uložit aktuální projekt jako"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publikovat 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exportovat soubor 3MF s vloženými vybranými nastaveními"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importovat 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7671,6 +7682,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Spodní"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Toto nastavení neurčuje typ schopnosti pluginu."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Toto nastavení určuje neznámý typ schopnosti pluginu: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Výběr pluginů"
@@ -8237,6 +8256,14 @@ msgstr "Potvrďte prosím, že je G-code v těchto předvolbách bezpečný, aby
 msgid "Customized Preset"
 msgstr "Přizpůsobená předvolba"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Některá publikovaná nastavení nebylo možné použít:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Některé sloty filamentu byly změněny:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Názvy komponent v souboru STEP nejsou ve formátu UTF-8!"
 
@@ -8647,6 +8674,21 @@ msgstr "Uložit rozřezaný soubor jako:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Soubor %s byl odeslán do úložiště tiskárny a lze jej zobrazit na tiskárně."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publikovat soubor 3MF jako:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Export publikovaného souboru 3MF selhal.\n"
+"Zkontrolujte prosím, zda složka existuje online, nebo zda soubor nemají otevřený jiné programy."
+
+msgid "Publish"
+msgstr "Publikovat"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Typ trysky není nastaven. Nastavte prosím trysku a zkuste to znovu."
 
@@ -8859,9 +8901,6 @@ msgstr "Chcete pokračovat?"
 msgid "Language selection"
 msgstr "Výběr jazyka"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Přepnutí jazyka aplikace, když jsou některé předvolby upraveny."
-
 msgid "Asia-Pacific"
 msgstr "Asie-Pacifik"
 
@@ -8967,6 +9006,9 @@ msgstr "Cesta k aktuální instanci: "
 msgid "General"
 msgstr "Obecné"
 
+msgid "Language"
+msgstr "Jazyk"
+
 msgid "Metric"
 msgstr "Metrika"
 
@@ -9429,9 +9471,6 @@ msgstr "Při posouvání posuvníku vrstev v náhledu po slicování vykresluje
 msgid "Dimmed layer brightness"
 msgstr "Jas ztmavených vrstev"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9828,9 +9867,6 @@ msgstr "Přejít na webovou stránku publikace modelu"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Poznámka: Příprava může trvat několik minut. Buďte prosím trpěliví."
 
-msgid "Publish"
-msgstr "Publikovat"
-
 msgid "Publish was canceled"
 msgstr "Publikování bylo zrušeno"
 
@@ -9846,6 +9882,81 @@ msgstr "Nahrávání dat"
 msgid "Jump to webpage"
 msgstr "Přejít na webovou stránku"
 
+# AI Translated
+msgid "Material"
+msgstr "Materiál"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Míchaný filament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Některé míchané filamenty závisejí na filamentech, které nebudou publikovány:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (míchaný)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% vyžaduje %2%, který není povolen."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% vyžaduje %2%, jehož materiál nebude publikován."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Chcete-li publikovat míchaný filament, povolte každý filament, který používá, a zvolte Úplné publikování nebo splňte jeho požadavek Typ."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Přesto publikovat"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publikovat 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Vyberte, která nastavení se mají publikovat v souboru 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki k publikování 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Videonávod k publikování 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Míchaný filament - publikuje se jako celek, pokud je výše zvoleno \"Povolit\""
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publikovat tento míchaný filament a povolit + úplně publikovat jeho složkové filamenty"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publikovat tento slot filamentu v souboru 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Úplné publikování"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Vložit celý filament tohoto slotu do souboru 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrovat nevybrané"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Uložit %s jako"
@@ -9864,6 +9975,10 @@ msgstr "Zkopíruje do této předvolby všechny hodnoty zděděné z nadřazené
 msgid "Detach from parent"
 msgstr "Oddělit od nadřazeného"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Uložit bez nadřazeného"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Samostatná předvolba"
@@ -10570,9 +10685,17 @@ msgstr "Pro detekci shlukování je vyžadována čistící věž. Bez čistíc
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Povolení přesné výšky Z i čistící věže může způsobit chyby slicování. Chcete přesto povolit přesnou výšku Z?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Plynulý časosběr vyžaduje čistící věž na každé vrstvě, což není slučitelné s možností \"Žádné řídké vrstvy\". Možnost \"Žádné řídké vrstvy\" byla vypnuta."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Pro hladký časosběr je potřeba základní věž. Model může mít vady bez základní věže. Chcete povolit základní věž?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "Možnost \"Žádné řídké vrstvy\" není slučitelná s plynulým časosběrem, který vyžaduje čistící věž na každé vrstvě. Časosběr byl přepnut do tradičního režimu."
+
 msgid "Still print by object?"
 msgstr "Stále tisknout po objektu?"
 
@@ -10951,10 +11074,6 @@ msgstr "Kompatibilní procesní profily"
 msgid "Printable space"
 msgstr "Tisknutelný prostor"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "Agent tiskárny"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Vyberte implementaci síťového agenta pro komunikaci s tiskárnou. Dostupní agenti jsou registrováni při spuštění."
 
@@ -11370,14 +11489,6 @@ msgstr "Počet extrudérů"
 msgid "Capabilities"
 msgstr "Možnosti"
 
-# AI Translated
-msgid "Left: "
-msgstr "Levý: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Pravý: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Zobrazit všechny předvolby (včetně nekompatibilních)"
 
@@ -12269,15 +12380,22 @@ msgstr "Oprava zrušena"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Kopírování souboru %1% do %2% selhalo: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Stahování nových profilů dodavatelů: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Balíček konfigurace: %1% aktualizováno na %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Stažení profilů dodavatelů selhalo: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Nejprve je třeba zkontrolovat neuložené změny před aktualizací konfigurace."
 
-msgid "Configuration package: "
-msgstr "Balíček konfigurace: "
-
-msgid " updated to "
-msgstr " aktualizováno na "
-
 msgid "Open G-code file:"
 msgstr "Otevřít G-code soubor:"
 
@@ -12337,11 +12455,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input Shaping je podporován pouze v Klipperu, RepRapFirmware a Marlinu 2"
 
-msgid "Grouping error: "
-msgstr "Chyba seskupení: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Chyba seskupení: %1% nelze umístit do levé trysky"
 
-msgid " can not be placed in the "
-msgstr " nelze umístit do "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Chyba seskupení: %1% nelze umístit do pravé trysky"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12456,6 +12578,10 @@ msgstr "%1% je příliš blízko ostatním, může dojít ke kolizím."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% je příliš vysoký, může dojít ke kolizím."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Vzájemná poloha modelu a čistící věže nesplňuje požadavky funkce \"Žádné řídké vrstvy\". Upravte prosím jejich vzájemnou polohu, snižte výšku modelu nebo vypněte možnost \"Žádné řídké vrstvy\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " je příliš blízko oblasti vyloučení, při tisku mohou nastat kolize."
 
@@ -12819,6 +12945,10 @@ msgstr "Použít 3MF místo G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Zapněte, pokud tiskárna přijímá jako tiskovou úlohu soubor 3MF. Je-li zapnuto, odešle Orca Slicer slicovaný soubor jako .gcode.3mf místo prostého souboru .gcode."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "Agent tiskárny"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Vyberte implementaci síťového agenta pro komunikaci s tiskárnou."
@@ -13882,6 +14012,10 @@ msgstr "Zarovnaná pravoúhlá"
 msgid "Concentric"
 msgstr "Koncentrický"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spirálový odsaz"
+
 msgid "Hilbert Curve"
 msgstr "Hilbertova křivka"
 
@@ -13973,13 +14107,13 @@ msgstr "Pořadí vyplňování horního povrchu"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Směr, ve kterém jsou horní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n"
-"Ven začíná ve středu povrchu, takže je přebytečný materiál vytlačen k okraji, kde je nejméně viditelný. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n"
-"Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech."
+"Směr, ve kterém se vyplňují horní povrchy při použití vzoru vycházejícího ze středu (Koncentrický, Spirálový odsaz, Archimédovy akordy, Oktagramová spirála).\n"
+"Ven začíná ve středu povrchu, takže se přebytečný materiál vytlačuje k okraji, kde je nejméně vidět. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n"
+"Výchozí používá řazení podle nejkratší cesty, které může probíhat v obou směrech."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13987,13 +14121,13 @@ msgstr "Pořadí vyplňování spodního povrchu"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Směr, ve kterém jsou spodní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n"
-"Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost první vrstvy na podložkách, kde se těsné oblouky ve středu nemusí přichytit. Ven začíná ve středu a přebytečný materiál vytlačuje k okraji.\n"
-"Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech."
+"Směr, ve kterém se vyplňují spodní povrchy při použití vzoru vycházejícího ze středu (Koncentrický, Spirálový odsaz, Archimédovy akordy, Oktagramová spirála).\n"
+"Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost počáteční vrstvy na podložkách, kde se těsné oblouky ve středu nemusí uchytit. Ven začíná ve středu a vytlačuje přebytečný materiál k okraji.\n"
+"Výchozí používá řazení podle nejkratší cesty, které může probíhat v obou směrech."
 
 msgid "Internal solid infill pattern"
 msgstr "Vzor vnitřní plné výplně"
@@ -14096,6 +14230,14 @@ msgstr "Proti směru hodinových ručiček"
 msgid "Clockwise"
 msgstr "Po směru hodinových ručiček"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Vzdálenost k tyči"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Vodorovná vzdálenost špičky trysky ke vzdálenější hraně tyče. Používá se pro vyhýbání se kolizím při tisku podle objektu."
+
 msgid "Height to rod"
 msgstr "Výška k tyči"
 
@@ -16292,6 +16434,20 @@ msgstr "Detekovat převislou stěnu"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Detekuje procento převisu vzhledem k šířce čáry a použije odlišnou rychlost tisku. Pro 100%% převis je použita rychlost mostů."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Tisknout nepodepřené stěny jako poslední"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Smyčky stěn, které leží zcela ve vzduchu, se tisknou až ve chvíli, kdy je má co udržet:\n"
+"extrudují se po ostatních stěnách svého ostrůvku, nejprve ta nejvnitřnější, bez ohledu na pořadí stěn.\n"
+"Smyčka, kterou dokážou ukotvit pouze můstky této vrstvy, čeká, až budou tyto můstky vytištěny, zatímco smyčka vedoucí podél podepřené stěny si ponechá své místo před výplní, která ji potřebuje jako ukotvení."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Vnější stěny"
@@ -16736,6 +16892,39 @@ msgstr "Očištění na okruzích"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Pro minimalizaci viditelnosti stehu v uzavřené smyčce extruze je před opuštěním smyčky tryskou proveden malý pohyb směrem dovnitř."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Očištění dovnitř"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Platí pouze pro vnější stěny včetně obrysů otvorů. Během očištění posouvá horkou trysku směrem k již vytištěným vnitřním stěnám, aby se omezilo opětovné zahřívání čerstvě vytištěného plastu a stopy po švu.\n"
+"\n"
+"Obzvláště užitečné při výškách vrstvy pod 0,1 mm, kde jsou stopy po očištění výraznější.\n"
+"\n"
+"Použije běžné očištění, pokud není žádná sousední vnitřní stěna již vytištěná (oblasti s jedinou stěnou nebo pořadí stěn Vnější/Vnitřní) nebo pokud nelze najít podepřenou dráhu dovnitř, například v ostrých rozích nebo v mezerách švu."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Vzdálenost očištění dovnitř"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Vzdálenost, o kterou se dráha očištění posune od vnějšího obvodu, uvedená v milimetrech nebo jako procento skutečné šířky extruze vnější stěny.\n"
+"\n"
+"Například 50% posune dráhu o polovinu šířky vnější stěny. Účinný posun je omezen jak skutečnou šířkou vnější stěny, tak dostupnou mezerou k sousední stěně, takže hodnoty nad 100% nebo odpovídající absolutní vzdálenost už nemají další účinek. Nastavením na 0 posun vypnete."
+
 msgid "Wipe before external loop"
 msgstr "Očištění před vnějším okruhem"
 
@@ -17003,8 +17192,9 @@ msgstr "Vyzvedne nový nástroj, aniž by čekal na dosažení tiskové teploty,
 msgid "No sparse layers (beta)"
 msgstr "Žádné řídké vrstvy (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Je-li povoleno, věž na očištění trysky se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách s výměnou nástroje pojede extruder dolů k tisku věže na očištění trysky. Uživatel je zodpovědný za zajištění, že nedojde ke kolizi s tiskem."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Pokud je povoleno, čistící věž se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách se změnou nástroje extruder sjede dolů, aby čistící věž vytiskl, takže věž skončí pod modelem a tisková hlava k ní musí dosáhnout dolů. Rozvržení, kde by to znamenalo kolizi s již vytištěným objektem, jsou odmítnuta. Nemá vliv při plynulém časosběru ani při detekci nánosů na trysce, které vyžadují věž na každé vrstvě."
 
 msgid "Prime all printing extruders"
 msgstr "Připravit všechny tiskové extrudery"
@@ -17030,6 +17220,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cyklické"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Cyklické pořadí"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Vlastní posloupnost filamentů použitá cyklickým řazením změn nástroje, jako čísla filamentů oddělená čárkami (např. \"3,2,1,4\").\n"
+"Každá vrstva tiskne své filamenty podle této posloupnosti; filamenty, které v ní nejsou uvedeny, se tisknou jako poslední, ve vzestupném pořadí.\n"
+"Ponechte prázdné, chcete-li filamenty procházet ve vzestupném pořadí."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Použít cyklické pořadí na počáteční vrstvu"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Použije cyklické pořadí změn nástroje také na počáteční vrstvu.\n"
+"Ve výchozím nastavení je vypnuto, protože počáteční vrstva se místo toho řadí pro nejlepší přilnavost k podložce: filamenty, které tisknou malé, křehké prvky počáteční vrstvy, se tisknou jako poslední, takže následné změny nástroje a přejezdy tyto slabě ukotvené části s menší pravděpodobností urazí. Toto pořadí počáteční vrstvy také respektuje vlastní posloupnost filamentů pro počáteční vrstvu, je-li nastavena. Přínos cyklického pořadí (další změny nástroje dávají každé vrstvě více času na vychladnutí) se na počáteční vrstvu nevztahuje, protože se tiskne pomalu a horká kvůli přilnavosti.\n"
+"Povolte to pouze tehdy, pokud potřebujete přesně stejnou posloupnost nástrojů na každé vrstvě včetně první, za cenu této optimalizace přilnavosti."
+
 msgid "Slice gap closing radius"
 msgstr "Poloměr uzavření mezery řezu"
 
@@ -17039,9 +17257,6 @@ msgstr "Trhliny menší než 2x poloměr uzavření mezery jsou při řezání t
 msgid "Slicing Mode"
 msgstr "Režim slicingu"
 
-msgid "Other"
-msgstr "Ostatní"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Použijte \"Sudý-lichý\" pro modely letadel 3DLabPrint. Použijte \"Zavřít díry\" pro uzavření všech otvorů v modelu."
 
@@ -18041,6 +18256,14 @@ msgstr "Bez kontroly"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Nespouštějte žádné kontroly platnosti, například kontrolu konfliktů dráhy G-kódu."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Přísný režim"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Skončí s nenulovým návratovým kódem, pokud slicování vyvolá nekritické varování, které by se jinak pouze zapsalo do protokolu, například model vyžadující podpory, zatímco jsou podpory vypnuté. Použijte v CI nebo ve skriptovaných procesech, které nikdy nesmí dodat nenápadně vadný výsledek slicování. Každé takové varování je navíc uvedeno se stabilní třídou v poli `warnings` souboru result.json, který se zapisuje pouze na Linuxu. Nelze kombinovat s --no-check, který přeskakuje kontrolu podpor."
+
 msgid "Normative check"
 msgstr "Normativní kontrola"
 
@@ -18053,11 +18276,28 @@ msgstr "Informace o výstupním modelu"
 msgid "This outputs the model’s information."
 msgstr "Zobrazit informace o modelu."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Prozkoumat síť (JSON na stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Vypíše na stdout souhrn JSON pro každý načtený objekt a poté skončí: jeho ohraničující kvádry a stěny konvexní obálky, na které jej lze položit, včetně jejich normál, obsahů a středů. Právě z těchto stěn vybírají volby --ground-*. Strojově čitelná alternativa k --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Prozkoumat malování (JSON na stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Vypíše strukturovaný souhrn JSON každé malované vrstvy (podpory, šev, barva MMU, fuzzy skin) již uložené v načteném modelu — počet facet, plochu povrchu a ohraničující kvádr v souřadnicích sítě pro každý stav — a poté skončí. Strojově čitelná alternativa k otevření malovacích nástrojů v rozhraní."
+
 msgid "Export Settings"
 msgstr "Exportovat nastavení"
 
-msgid "This exports settings to a file."
-msgstr "Exportovat nastavení do souboru."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Toto exportuje nastavení do souboru. Použijte - pro zápis na stdout."
 
 msgid "Send progress to pipe"
 msgstr "Odesílat průběh do pipe"
@@ -18113,6 +18353,30 @@ msgstr "Otočit kolem osy Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Úhel rotace kolem osy Y ve stupních."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Položit na největší stěnu"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Položí každý objekt na největší stěnu jeho konvexní obálky a spustí jej na podložku. Ze stejně velkých stěn se zachová ta, která již směřuje dolů. Objekty bez stěny dostatečně velké na to, aby na ní mohly spočívat, zůstanou beze změny. Transformace se provádějí v pořadí zadání na příkazové řádce, takže rotace uvedené před touto volbou jsou respektovány. --orient 1 se spouští po všech transformacích a nahrazuje orientaci."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Položit na stěnu podle normály"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Položí každý objekt na tu stěnu konvexní obálky, jejíž vnější normála je nejblíže směru NX,NY,NZ, a spustí jej na podložku. Směr je v souřadnicích objektu, které zahrnují rotace uvedené před touto volbou a odpovídají osám podložky, pokud vstupní soubor objekt neotáčí. Například 1,0,0 postaví objekt na jeho stranu +X. --orient 1 se spouští po všech transformacích a nahrazuje orientaci."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Položit na stěnu v bodě"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Položí každý objekt na tu stěnu konvexní obálky, která obsahuje bod X,Y,Z, a spustí jej na podložku. Bod je v souřadnicích objektu, které zahrnují rotace uvedené před touto volbou; --inspect-mesh uvádí středy stěn v těchto souřadnicích. Objekty bez takové stěny zůstanou beze změny a běh selže, pokud ji nemá žádný objekt. --orient 1 se spouští po všech transformacích a nahrazuje orientaci."
+
 msgid "Scale the model by a float factor."
 msgstr "Změnit měřítko modelu podle desetinného faktoru."
 
@@ -21331,6 +21595,18 @@ msgstr "Tuto akci nelze vrátit zpět. Pokračovat?"
 msgid "Skipping objects."
 msgstr "Přeskakování objektů."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Poměr materiálu"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Výška modelu"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Poměr"
+
 # AI Translated
 msgid "Select Filament"
 msgstr "Vybrat filament"
@@ -21645,12 +21921,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Sušení – odvlhčování"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " maximální teplota sušení je "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Maximální teplota sušení pro %s je %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " minimální teplota sušení je "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Minimální teplota sušení pro %s je %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22102,6 +22380,97 @@ msgstr ""
 "Zamezte kroucení\n"
 "Víte, že při tisku materiálů náchylných ke kroucení, jako je ABS, může vhodné zvýšení teploty vyhřívané desky snížit pravděpodobnost kroucení?"
 
+#~ msgid "Other"
+#~ msgstr "Ostatní"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Levý: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Pravý: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Maximální teplota nesmí překročit "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Minimální teplota nesmí být nižší než "
+
+#~ msgid "up to"
+#~ msgstr "až do"
+
+#~ msgid "above"
+#~ msgstr "nad"
+
+#~ msgid "from"
+#~ msgstr "Od"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Balíček konfigurace: "
+
+#~ msgid " updated to "
+#~ msgstr " aktualizováno na "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Chyba seskupení: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " nelze umístit do "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " maximální teplota sušení je "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " minimální teplota sušení je "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "vyžaduje"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "není povoleno"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materiál není publikován"
+
+#~ msgid "Select the language"
+#~ msgstr "Zvolte jazyk"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Vybrat plugin"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Směr, ve kterém jsou horní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n"
+#~ "Ven začíná ve středu povrchu, takže je přebytečný materiál vytlačen k okraji, kde je nejméně viditelný. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n"
+#~ "Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Směr, ve kterém jsou spodní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n"
+#~ "Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost první vrstvy na podložkách, kde se těsné oblouky ve středu nemusí přichytit. Ven začíná ve středu a přebytečný materiál vytlačuje k okraji.\n"
+#~ "Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Je-li povoleno, věž na očištění trysky se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách s výměnou nástroje pojede extruder dolů k tisku věže na očištění trysky. Uživatel je zodpovědný za zajištění, že nedojde ke kolizi s tiskem."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exportovat nastavení do souboru."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Nativní živý náhled ve Waylandu vyžaduje video sink GStreamer GTK. Nainstalujte prosím plugin gtksink pro GStreamer a poté restartujte OrcaSlicer."
diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po
index 4ff61fb6ea..a4909c409b 100644
--- a/localization/i18n/de/OrcaSlicer_de.po
+++ b/localization/i18n/de/OrcaSlicer_de.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -2430,15 +2430,6 @@ msgstr "Es ist ein Update verfügbar. Öffnen Sie den Profilbündel-Dialog, um e
 msgid "%s has been removed."
 msgstr "%s wurde entfernt."
 
-msgid "Switching application language"
-msgstr "Wechsel der Sprache"
-
-msgid "Select the language"
-msgstr "Sprache wählen"
-
-msgid "Language"
-msgstr "Sprache"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3680,11 +3671,15 @@ msgstr "Aktuelles Filament am Filament Track Switch zurückziehen"
 msgid "Switch track at Filament Track Switch"
 msgstr "Spur am Filament Track Switch wechseln"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Die maximale Temperatur darf nicht überschritten werden "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Die maximale Temperatur darf %d nicht überschreiten"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Die minimale Temperatur sollte nicht weniger als "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Die minimale Temperatur darf %d nicht unterschreiten"
 
 msgid "Type to filter..."
 msgstr "Tippen zum Filtern..."
@@ -4556,6 +4551,15 @@ msgstr ""
 "Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen. Ist die SD-Karte schreibgeschützt?\n"
 "Fehlermeldung: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen.\n"
+"Fehlermeldung: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen. Es könnte ein Problem mit dem Zielgerät geben. Versuchen Sie es erneut oder verwenden Sie ein anderes Gerät. Der beschädigte Ausgabe-G-Code befindet sich in %1%.tmp."
@@ -4859,6 +4863,9 @@ msgstr ""
 "Ja - Diese Einstellungen ändern und den Spiralmodus automatisch aktivieren\n"
 "Nein - Spiralmodus nicht aktivieren"
 
+msgid "N/A"
+msgstr "Nicht verfügbar"
+
 msgid "Printing"
 msgstr "Drucken"
 
@@ -5289,14 +5296,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Wert %s ist außerhalb des Bereichs. Der gültige Bereich liegt zwischen %d und %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Heißt es %s%% oder %s %s?\n"
-"Ja für %s%%, \n"
-"Nein für %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Heißt es %s%% oder %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5318,29 +5322,22 @@ msgstr "Ungültiges Muster. Verwenden Sie N, N#K oder eine durch Kommas getrennt
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Ungültiges Format. Erwartetes Vektorformat: \"%1%\""
 
-msgid "N/A"
-msgstr "Nicht verfügbar"
-
 # AI Translated
 msgid "System agents"
 msgstr "Systemagenten"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Kein Plugin ausgewählt"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Plugin hinzufügen"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Plugin auswählen"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Plugin entfernen"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Kein Plugin ausgewählt"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfigurieren"
@@ -5596,14 +5593,20 @@ msgstr "Auf optimal setzen"
 msgid "Regroup filament"
 msgstr "Filament neu gruppieren"
 
-msgid "up to"
-msgstr "bis zu"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "bis zu %1% mm"
 
-msgid "above"
-msgstr "über"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "über %1% mm"
 
-msgid "from"
-msgstr "von"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "von %1% bis %2% mm"
 
 msgid "Usage"
 msgstr "Nutzung"
@@ -5963,7 +5966,7 @@ msgstr "Volumen:"
 msgid "Size:"
 msgstr "Größe:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Konflikte von G-Code-Pfaden wurden bei Layer %d, Z = %.2lf mm gefunden.Bitte trennen Sie die konfliktbehafteten Objekte weiter voneinander (%s <-> %s)."
 
@@ -6274,6 +6277,14 @@ msgstr "Projekt speichern als"
 msgid "Save current project as"
 msgstr "Aktuelles Projekt speichern als"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MF veröffentlichen"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Eine 3MF-Datei mit den ausgewählten eingebetteten Einstellungen exportieren"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importiere 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7541,6 +7552,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Untere"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Diese Einstellung gibt keinen Plugin-Fähigkeitstyp an."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Diese Einstellung gibt einen unbekannten Plugin-Fähigkeitstyp an: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Plugin-Auswahl"
@@ -8107,6 +8126,14 @@ msgstr "Bitte bestätigen Sie, dass die G-Codes innerhalb dieser Profile sicher
 msgid "Customized Preset"
 msgstr "Benutzerdefinierte Profile"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Einige veröffentlichte Einstellungen konnten nicht angewendet werden:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Einige Filament-Steckplätze wurden geändert:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Der Name der Komponenten in der Step-Datei ist nicht im UTF-8-Format!"
 
@@ -8519,6 +8546,21 @@ msgstr "Geslicte Datei speichern unter:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Die Datei %s wurde an den Speicher des Druckers gesendet und kann auf dem Drucker angezeigt werden."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MF-Datei veröffentlichen als:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Die veröffentlichte 3MF-Datei konnte nicht exportiert werden.\n"
+"Bitte prüfen Sie, ob der Ordner online liegt oder ob andere Programme die Datei geöffnet haben."
+
+msgid "Publish"
+msgstr "Veröffentlichen"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Die Düsenart ist nicht eingestellt. Bitte stellen Sie die Düse ein und versuchen Sie es erneut."
 
@@ -8731,9 +8773,6 @@ msgstr "Möchten Sie fortfahren?"
 msgid "Language selection"
 msgstr "Sprachauswahl"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Umschalten der Anwendungssprache, während einige Profile geändert werden."
-
 msgid "Asia-Pacific"
 msgstr "Asien-Pazifik"
 
@@ -8838,6 +8877,9 @@ msgstr "Aktueller Instanzpfad: "
 msgid "General"
 msgstr "Allgemein"
 
+msgid "Language"
+msgstr "Sprache"
+
 msgid "Metric"
 msgstr "Metrisch"
 
@@ -9276,9 +9318,6 @@ msgstr "Beim Bewegen des Schichtreglers in der geslicten Vorschau werden die Sch
 msgid "Dimmed layer brightness"
 msgstr "Helligkeit abgedunkelter Schichten"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9662,9 +9701,6 @@ msgstr "Zur Modellveröffentlichungs-Webseite springen"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Hinweis: Die Vorbereitung kann einige Minuten dauern. Bitte haben Sie Geduld."
 
-msgid "Publish"
-msgstr "Veröffentlichen"
-
 msgid "Publish was canceled"
 msgstr "Veröffentlichung wurde abgebrochen"
 
@@ -9680,6 +9716,81 @@ msgstr "Daten werden hochgeladen"
 msgid "Jump to webpage"
 msgstr "Zu einer Website springen"
 
+# AI Translated
+msgid "Material"
+msgstr "Material"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Mischfilament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Einige Mischfilamente benötigen Filamente, die nicht veröffentlicht werden:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (gemischt)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% benötigt %2%, das nicht aktiviert ist."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% benötigt %2%, dessen Material nicht veröffentlicht wird."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Um ein Mischfilament zu veröffentlichen, aktivieren Sie jedes von ihm verwendete Filament und wählen Sie Vollständig veröffentlichen oder erfüllen Sie dessen Typ-Anforderung."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Trotzdem veröffentlichen"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MF veröffentlichen..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Wählen Sie aus, welche Einstellungen in der 3MF-Datei veröffentlicht werden"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki: 3MF veröffentlichen"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Videoanleitung: 3MF veröffentlichen"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Mischfilament - wird als Ganzes veröffentlicht, wenn oben \"Aktivieren\" ausgewählt ist"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Dieses Mischfilament veröffentlichen und seine Komponentenfilamente aktivieren + vollständig veröffentlichen"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Diesen Filament-Steckplatz in der 3MF-Datei veröffentlichen"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Vollständig veröffentlichen"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Das gesamte Filament dieses Steckplatzes in die 3MF-Datei einbetten"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Nicht ausgewählte filtern"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "%s speichern als"
@@ -9697,6 +9808,10 @@ msgstr "Kopiert alle vom übergeordneten Profil geerbten Werte in dieses Profil
 msgid "Detach from parent"
 msgstr "Vom übergeordneten Element trennen"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Ohne übergeordnetes Element speichern"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Eigenständiges Profil"
@@ -10397,9 +10512,17 @@ msgstr "Reinigungsturm ist für die Erkennung von Klumpen erforderlich. Ohne Rei
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Das Aktivieren von sowohl präziser Z-Höhe als auch Reinigungsturm kann zu Slicing-Fehlern führen. Möchten Sie trotzdem die präzise Z-Höhe aktivieren?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Der Smooth-Zeitraffer benötigt auf jeder Schicht einen Reinigungsturm und ist daher nicht mit \"Keine dünnen Schichten\" kompatibel. \"Keine dünnen Schichten\" wurde deaktiviert."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Für den gewählten Zeitraffermodus ist ein Reinigungsturm erforderlich. Ohne Reinigungsturm kann es zu Fehlern am Modell kommen. Möchten Sie den Reinigungsturm aktivieren?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Keine dünnen Schichten\" ist nicht mit dem Smooth-Zeitraffer kompatibel, der auf jeder Schicht einen Reinigungsturm benötigt. Der Zeitraffer wurde auf den traditionellen Modus umgestellt."
+
 msgid "Still print by object?"
 msgstr "Trotzdem nach Objekt drucken?"
 
@@ -10769,9 +10892,6 @@ msgstr "Kompatible Prozessprofile"
 msgid "Printable space"
 msgstr "Druckbarer Raum"
 
-msgid "Printer Agent"
-msgstr "Drucker-Agent"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Wählen Sie die Implementierung des Netzwerkagenten für die Druckerkommunikation. Verfügbare Agenten werden beim Start registriert."
 
@@ -11173,12 +11293,6 @@ msgstr "Anzahl der Extruder"
 msgid "Capabilities"
 msgstr "Fähigkeiten"
 
-msgid "Left: "
-msgstr "Links: "
-
-msgid "Right: "
-msgstr "Rechts: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Alle Profile anzeigen (auch inkompatible)"
 
@@ -12016,15 +12130,22 @@ msgstr "Reparatur abgebrochen"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Kopieren der Datei %1% nach %2% fehlgeschlagen: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Neue Herstellerprofile werden heruntergeladen: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Konfigurationspaket: %1% aktualisiert auf %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Herstellerprofile konnten nicht heruntergeladen werden: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Vor der Aktualisierung der Konfiguration müssen die nicht gespeicherten Änderungen überprüft werden."
 
-msgid "Configuration package: "
-msgstr "Konfigurationspaket:"
-
-msgid " updated to "
-msgstr " aktualisiert auf "
-
 msgid "Open G-code file:"
 msgstr "Öffne G-Code-Datei:"
 
@@ -12084,11 +12205,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input Shaping wird nur von Klipper, RepRapFirmware und Marlin 2 unterstützt"
 
-msgid "Grouping error: "
-msgstr "Gruppierungsfehler: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Gruppierungsfehler: %1% kann nicht in der linken Düse platziert werden"
 
-msgid " can not be placed in the "
-msgstr " kann nicht platziert werden in der "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Gruppierungsfehler: %1% kann nicht in der rechten Düse platziert werden"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12202,6 +12327,10 @@ msgstr "%1% ist zu nah an anderen, was Kollisionen verursachen kann."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% ist zu hoch und es kommt zu Kollisionen."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Die relative Position von Modell und Reinigungsturm erfüllt nicht die Anforderungen der Funktion \"Keine dünnen Schichten\". Bitte passen Sie ihre relative Position an, verringern Sie die Modellhöhe oder deaktivieren Sie \"Keine dünnen Schichten\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " befindet sich zu nahe an einem Sperrbereich. Beim Drucken kann es zu Kollisionen kommen."
 
@@ -12547,6 +12676,9 @@ msgstr "Benutze 3MF statt G-Code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Aktivieren Sie diese Option, wenn der Drucker eine 3MF-Datei als Druckauftrag akzeptiert. Wenn aktiviert, sendet Orca Slicer die geslicete Datei als .gcode.3mf, anstatt als einfache .gcode-Datei."
 
+msgid "Printer Agent"
+msgstr "Drucker-Agent"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Wählen Sie die Netzwerk-Agent-Implementierung für die Druckerkommunikation aus."
 
@@ -13591,6 +13723,10 @@ msgstr "Geradlinig ausgerichtet"
 msgid "Concentric"
 msgstr "Konzentrisch"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spiralversatz"
+
 msgid "Hilbert Curve"
 msgstr "Hilbert-Kurve"
 
@@ -13682,13 +13818,13 @@ msgstr "Füllreihenfolge der oberen Oberfläche"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Richtung, in der obere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n"
-"Nach außen beginnt in der Mitte der Oberfläche, sodass überschüssiges Material zum Rand geschoben wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n"
-"Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann."
+"Richtung, in der obere Flächen gefüllt werden, wenn ein zentrumsbasiertes Muster verwendet wird (Konzentrisch, Spiralversatz, Archimedische Akkorde, Oktagramm Spirale).\n"
+"Nach außen beginnt in der Mitte der Fläche, sodass überschüssiges Material zum Rand gedrückt wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n"
+"Standard verwendet die Reihenfolge des kürzesten Weges, die in beide Richtungen verlaufen kann."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13696,13 +13832,13 @@ msgstr "Füllreihenfolge der unteren Oberfläche"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Richtung, in der untere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n"
-"Nach innen beginnt jede Oberfläche mit den breiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und schiebt überschüssiges Material zum Rand.\n"
-"Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann."
+"Richtung, in der untere Flächen gefüllt werden, wenn ein zentrumsbasiertes Muster verwendet wird (Konzentrisch, Spiralversatz, Archimedische Akkorde, Oktagramm Spirale).\n"
+"Nach innen beginnt jede Fläche mit den weiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und drückt überschüssiges Material zum Rand.\n"
+"Standard verwendet die Reihenfolge des kürzesten Weges, die in beide Richtungen verlaufen kann."
 
 msgid "Internal solid infill pattern"
 msgstr "Muster für das interne feste Füllmuster"
@@ -13805,6 +13941,14 @@ msgstr "Gegen den Uhrzeigersinn"
 msgid "Clockwise"
 msgstr "Im Uhrzeigersinn"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Abstand zur Stange"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Horizontaler Abstand der Düsenspitze zur entfernteren Kante der Stange. Wird zur Kollisionsvermeidung beim Drucken nach Objekt verwendet."
+
 msgid "Height to rod"
 msgstr "Höhe zur Führung"
 
@@ -15958,6 +16102,20 @@ msgstr "Erkennen von Wandüberhängen"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Erkennt den Prozentsatz des Überhangs im Verhältnis zur Linienbreite und verwenden hierfür eine unterschiedliche Druckgeschwindigkeiten. Bei einem 100%% Überhang wird die Brückengeschwindigkeit verwendet."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Nicht gestützte Wände zuletzt drucken"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Wandschleifen, die vollständig in der Luft liegen, werden erst gedruckt, wenn etwas sie halten kann:\n"
+"Sie werden nach den übrigen Wänden ihrer Insel extrudiert, die innerste zuerst, unabhängig von der Wandreihenfolge.\n"
+"Eine Schleife, die nur von den Überbrückungen dieser Schicht verankert werden kann, wartet, bis diese Überbrückungen gedruckt sind, während eine Schleife, die neben einer gestützten Wand verläuft, ihren Platz vor der Füllung behält, die sie als Verankerung benötigt."
+
 msgid "Outer walls"
 msgstr "Äußere Wände"
 
@@ -16399,6 +16557,39 @@ msgstr "Wischbewegung nach innen"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Um die Sichtbarkeit der Naht in einer geschlossenen Schleifen-Extrusion zu minimieren, wird vor dem Verlassen der Schleife eine kleine Bewegung nach innen ausgeführt."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Reinigen nach innen"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Gilt nur für Außenwände, einschließlich Lochkonturen. Bewegt die heiße Düse beim Reinigen in Richtung bereits gedruckter innerer Wände, um das erneute Aufschmelzen frisch gedruckten Kunststoffs und Nahtmarkierungen zu verringern.\n"
+"\n"
+"Besonders nützlich bei Schichthöhen unter 0,1 mm, wo Reinigungsspuren deutlicher sichtbar sind.\n"
+"\n"
+"Verwendet die normale Reinigung, wenn keine angrenzende innere Wand bereits gedruckt ist (Bereiche mit nur einer Wand oder die Wandreihenfolge Außen/Innen) oder wenn kein gestützter Weg nach innen gefunden werden kann, zum Beispiel an engen Ecken oder Nahtlücken."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Abstand für Reinigen nach innen"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Der Abstand, um den der Reinigungsweg vom Außenperimeter weg verschoben wird, angegeben in Millimetern oder als Prozentsatz der tatsächlichen Extrusionsbreite der Außenwand.\n"
+"\n"
+"Zum Beispiel verschiebt 50% den Weg um die halbe Außenwandbreite. Der wirksame Versatz wird sowohl durch die tatsächliche Außenwandbreite als auch durch den verfügbaren Abstand zur benachbarten Wand begrenzt, sodass Werte über 100% oder ein entsprechender absoluter Abstand keine zusätzliche Wirkung haben. Auf 0 setzen, um den Versatz zu deaktivieren."
+
 msgid "Wipe before external loop"
 msgstr "Wischbewegung vor äußerer Schleife"
 
@@ -16661,8 +16852,9 @@ msgstr "Nimmt das neue Werkzeug auf, ohne auf das Erreichen der Drucktemperatur
 msgid "No sparse layers (beta)"
 msgstr "Keine dünnen Schichten (Beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Wenn aktiviert, wird der Reinigungsturm nicht auf Schichten ohne Werkzeugwechsel gedruckt. Auf Schichten mit einem Werkzeugwechsel wird der Extruder nach unten fahren, um den Reinigungsturm zu drucken. Der Benutzer ist dafür verantwortlich, dass es keine Kollision mit dem Druck gibt."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Wenn aktiviert, wird der Reinigungsturm auf Schichten ohne Werkzeugwechsel nicht gedruckt. Auf Schichten mit einem Werkzeugwechsel fährt der Extruder nach unten, um den Reinigungsturm zu drucken, sodass der Turm unterhalb des Modells endet und der Werkzeugkopf zu ihm hinuntergreifen muss. Anordnungen, bei denen das mit einem bereits gedruckten Objekt kollidieren würde, werden abgelehnt. Hat keine Wirkung beim Smooth-Zeitraffer oder bei der Düsenverstopfungserkennung, die auf jeder Schicht einen Turm benötigen."
 
 msgid "Prime all printing extruders"
 msgstr "Reinige alle Druckextruder"
@@ -16688,6 +16880,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Zyklisch"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Zyklische Reihenfolge"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Benutzerdefinierte Filamentreihenfolge für die zyklische Werkzeugwechsel-Reihenfolge, als durch Kommas getrennte Filamentnummern (z. B. \"3,2,1,4\").\n"
+"Jede Schicht druckt ihre Filamente in dieser Reihenfolge; nicht aufgeführte Filamente werden zuletzt gedruckt, in aufsteigender Reihenfolge.\n"
+"Leer lassen, um die Filamente in aufsteigender Reihenfolge zu durchlaufen."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Zyklische Reihenfolge auf erste Schicht anwenden"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Wendet die zyklische Werkzeugwechsel-Reihenfolge auch auf die erste Schicht an.\n"
+"Standardmäßig ist dies deaktiviert, weil die erste Schicht stattdessen für die beste Druckbetthaftung sortiert wird: Filamente, die kleine, empfindliche Elemente der ersten Schicht drucken, werden zuletzt gedruckt, sodass die folgenden Werkzeugwechsel und Eilgänge diese schwach verankerten Teile seltener losreißen. Diese Reihenfolge der ersten Schicht berücksichtigt auch eine benutzerdefinierte Filamentreihenfolge für die erste Schicht, sofern eine festgelegt ist. Der Vorteil der zyklischen Reihenfolge (zusätzliche Werkzeugwechsel geben jeder Schicht mehr Zeit zum Abkühlen) gilt nicht für die erste Schicht, die für die Haftung langsam und heiß gedruckt wird.\n"
+"Aktivieren Sie dies nur, wenn Sie auf jeder Schicht einschließlich der ersten exakt dieselbe Werkzeugreihenfolge benötigen, auf Kosten dieser Haftungsoptimierung."
+
 msgid "Slice gap closing radius"
 msgstr "Slice-Lückenschlussradius"
 
@@ -16697,9 +16917,6 @@ msgstr "Risse, die kleiner als das 2-fache des Lückenschlussradius sind, werden
 msgid "Slicing Mode"
 msgstr "Slicing-Modus"
 
-msgid "Other"
-msgstr "Sonstiges"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Verwenden Sie \"Gerade-ungerade\" für 3DLabPrint-Flugzeugmodelle. Verwenden Sie \"Löcher schließen\", um alle Löcher im Modell zu schließen."
 
@@ -17690,6 +17907,14 @@ msgstr "Keine Überprüfung"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Führe keine Gültigkeitsprüfungen durch, wie beispielsweise die Überprüfung von G-Code-Pfadkonflikten."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Strikter Modus"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Beendet sich mit einem Rückgabewert ungleich null, wenn das Slicen eine nicht kritische Warnung auslöst, die sonst nur protokolliert wird, etwa ein Modell, das Stützen benötigt, während Stützen deaktiviert sind. Verwenden Sie dies in CI- oder Skript-Pipelines, die niemals einen unbemerkt fehlerhaften Slice ausliefern sollen. Jede solche Warnung wird zusätzlich mit einer stabilen Klasse im Array `warnings` von result.json aufgeführt, das nur unter Linux geschrieben wird. Kann nicht mit --no-check kombiniert werden, das die Stützenprüfung überspringt."
+
 msgid "Normative check"
 msgstr "Normative Überprüfung"
 
@@ -17702,11 +17927,28 @@ msgstr "Ausgabe Modellinformationen"
 msgid "This outputs the model’s information."
 msgstr "Geben Sie die Informationen des Modells aus."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Mesh prüfen (JSON nach stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Gibt eine JSON-Zusammenfassung jedes geladenen Objekts nach stdout aus und beendet sich dann: seine Begrenzungsrahmen und die Flächen der konvexen Hülle, auf die es gelegt werden kann, mit deren Normalen, Flächeninhalten und Mittelpunkten. Dies sind die Flächen, aus denen die Optionen --ground-* auswählen. Maschinenlesbare Alternative zu --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Bemalung prüfen (JSON nach stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Gibt eine strukturierte JSON-Zusammenfassung jeder bereits im geladenen Modell gespeicherten Bemalungsebene (Stützen, Naht, MMU-Farbe, Fuzzy skin) aus — Facettenanzahl, Oberfläche und mesh-lokaler Begrenzungsrahmen je Zustand — und beendet sich dann. Maschinenlesbare Alternative zum Öffnen der Mal-Gizmos in der Benutzeroberfläche."
+
 msgid "Export Settings"
 msgstr "Einstellungen exportieren"
 
-msgid "This exports settings to a file."
-msgstr "Einstellungen in eine Datei exportieren."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Exportiert die Einstellungen in eine Datei. Verwenden Sie -, um sie nach stdout zu schreiben."
 
 msgid "Send progress to pipe"
 msgstr "Fortschritt an die Leitung senden"
@@ -17762,6 +18004,30 @@ msgstr "Rotieren um Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Rotationswinkel um die Y-Achse in Grad."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Auf größte Fläche legen"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt jedes Objekt auf die größte Fläche seiner konvexen Hülle und lässt es auf das Druckbett fallen. Bei gleich großen Flächen wird die bereits nach unten zeigende beibehalten. Objekte ohne eine ausreichend große Auflagefläche bleiben unverändert. Transformationen werden in der Reihenfolge der Befehlszeile ausgeführt, sodass vor dieser Option angegebene Drehungen berücksichtigt werden. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Auf Fläche nach Normale legen"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt jedes Objekt auf die Fläche der konvexen Hülle, deren äußere Normale der Richtung NX,NY,NZ am nächsten kommt, und lässt es auf das Druckbett fallen. Die Richtung ist in Objektkoordinaten angegeben, die die vor dieser Option angegebenen Drehungen enthalten und den Achsen des Druckbetts entsprechen, sofern die Eingabedatei das Objekt nicht dreht. Zum Beispiel stellt 1,0,0 das Objekt auf seine +X-Seite. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Auf Fläche an Punkt legen"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt jedes Objekt auf die Fläche der konvexen Hülle, die den Punkt X,Y,Z enthält, und lässt es auf das Druckbett fallen. Der Punkt ist in Objektkoordinaten angegeben, die die vor dieser Option angegebenen Drehungen enthalten; --inspect-mesh gibt Flächenmittelpunkte in diesen an. Objekte ohne eine solche Fläche bleiben unverändert, und der Durchlauf schlägt fehl, wenn kein Objekt eine solche hat. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung."
+
 msgid "Scale the model by a float factor."
 msgstr "Skalierung des Modells um einen Faktor"
 
@@ -20816,6 +21082,18 @@ msgstr "Diese Aktion kann nicht rückgängig gemacht werden. Fortsetzen?"
 msgid "Skipping objects."
 msgstr "Objekte werden übersprungen."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Materialanteil"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modellhöhe"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Anteil"
+
 msgid "Select Filament"
 msgstr "Filament auswählen"
 
@@ -21072,12 +21350,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Trocknung – Entfeuchten"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " maximale Trocknungstemperatur ist "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Die maximale Trocknungstemperatur von %s beträgt %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " minimale Trocknungstemperatur ist "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Die minimale Trocknungstemperatur von %s beträgt %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21522,6 +21802,95 @@ msgstr ""
 "Verwerfungen vermeiden\n"
 "Wussten Sie, dass beim Drucken von Materialien, die zu Verwerfungen neigen, wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die Wahrscheinlichkeit von Verwerfungen verringert werden kann?"
 
+#~ msgid "Other"
+#~ msgstr "Sonstiges"
+
+#~ msgid "Left: "
+#~ msgstr "Links: "
+
+#~ msgid "Right: "
+#~ msgstr "Rechts: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Die maximale Temperatur darf nicht überschritten werden "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Die minimale Temperatur sollte nicht weniger als "
+
+#~ msgid "up to"
+#~ msgstr "bis zu"
+
+#~ msgid "above"
+#~ msgstr "über"
+
+#~ msgid "from"
+#~ msgstr "von"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Konfigurationspaket:"
+
+#~ msgid " updated to "
+#~ msgstr " aktualisiert auf "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Gruppierungsfehler: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " kann nicht platziert werden in der "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " maximale Trocknungstemperatur ist "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " minimale Trocknungstemperatur ist "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "benötigt"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "nicht aktiviert"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "Material nicht veröffentlicht"
+
+#~ msgid "Select the language"
+#~ msgstr "Sprache wählen"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Plugin auswählen"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Richtung, in der obere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n"
+#~ "Nach außen beginnt in der Mitte der Oberfläche, sodass überschüssiges Material zum Rand geschoben wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n"
+#~ "Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Richtung, in der untere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n"
+#~ "Nach innen beginnt jede Oberfläche mit den breiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und schiebt überschüssiges Material zum Rand.\n"
+#~ "Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Wenn aktiviert, wird der Reinigungsturm nicht auf Schichten ohne Werkzeugwechsel gedruckt. Auf Schichten mit einem Werkzeugwechsel wird der Extruder nach unten fahren, um den Reinigungsturm zu drucken. Der Benutzer ist dafür verantwortlich, dass es keine Kollision mit dem Druck gibt."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Einstellungen in eine Datei exportieren."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Native Wayland Liveview erfordert das GStreamer GTK Video Sink. Bitte installieren Sie das gtksink-Plugin für GStreamer und starten Sie OrcaSlicer neu."
 
diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po
index 67d4d196d4..d6f39cacb5 100644
--- a/localization/i18n/en/OrcaSlicer_en.po
+++ b/localization/i18n/en/OrcaSlicer_en.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -2289,15 +2289,6 @@ msgstr ""
 msgid "%s has been removed."
 msgstr ""
 
-msgid "Switching application language"
-msgstr ""
-
-msgid "Select the language"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr ""
@@ -3484,10 +3475,12 @@ msgstr ""
 msgid "Switch track at Filament Track Switch"
 msgstr ""
 
-msgid "The maximum temperature cannot exceed "
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
 msgstr ""
 
-msgid "The minmum temperature should not be less than "
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
 msgstr ""
 
 msgid "Type to filter..."
@@ -4320,6 +4313,12 @@ msgid ""
 "Error message: %1%"
 msgstr ""
 
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr ""
@@ -4567,6 +4566,9 @@ msgid ""
 "No  - Cancel enabling spiral mode"
 msgstr ""
 
+msgid "N/A"
+msgstr ""
+
 msgid "Printing"
 msgstr ""
 
@@ -4989,10 +4991,10 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr ""
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr ""
+
+msgid "%"
 msgstr ""
 
 #, boost-format
@@ -5015,22 +5017,16 @@ msgstr ""
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr ""
 
-msgid "N/A"
-msgstr ""
-
 msgid "System agents"
 msgstr ""
 
-msgid "No plugin selected"
-msgstr ""
-
 msgid "Add plugin"
 msgstr ""
 
-msgid "Select plugin"
+msgid "Remove plugin"
 msgstr ""
 
-msgid "Remove plugin"
+msgid "No plugin selected"
 msgstr ""
 
 msgid "Configure"
@@ -5286,13 +5282,16 @@ msgstr ""
 msgid "Regroup filament"
 msgstr ""
 
-msgid "up to"
+#, boost-format
+msgid "up to %1% mm"
 msgstr ""
 
-msgid "above"
+#, boost-format
+msgid "above %1% mm"
 msgstr ""
 
-msgid "from"
+#, boost-format
+msgid "from %1% to %2% mm"
 msgstr ""
 
 msgid "Usage"
@@ -5643,7 +5642,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr ""
 
@@ -5947,6 +5946,12 @@ msgstr ""
 msgid "Save current project as"
 msgstr ""
 
+msgid "Publish 3MF"
+msgstr ""
+
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr ""
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr ""
 
@@ -7174,6 +7179,12 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
 
+msgid "This setting does not specify a plugin capability type."
+msgstr ""
+
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr ""
+
 msgid "Plugin Selection"
 msgstr ""
 
@@ -7692,6 +7703,12 @@ msgstr ""
 msgid "Customized Preset"
 msgstr ""
 
+msgid "Some published settings could not be applied:"
+msgstr ""
+
+msgid "Some filament slots were changed:"
+msgstr ""
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr ""
 
@@ -8070,6 +8087,17 @@ msgstr ""
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr ""
 
+msgid "Publish 3MF file as:"
+msgstr ""
+
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+
+msgid "Publish"
+msgstr ""
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr ""
 
@@ -8267,9 +8295,6 @@ msgstr ""
 msgid "Language selection"
 msgstr ""
 
-msgid "Switching application language while some presets are modified."
-msgstr ""
-
 msgid "Asia-Pacific"
 msgstr ""
 
@@ -8363,6 +8388,9 @@ msgstr ""
 msgid "General"
 msgstr ""
 
+msgid "Language"
+msgstr ""
+
 msgid "Metric"
 msgstr ""
 
@@ -8752,9 +8780,6 @@ msgstr ""
 msgid "Dimmed layer brightness"
 msgstr ""
 
-msgid "%"
-msgstr ""
-
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
 "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option."
@@ -9120,9 +9145,6 @@ msgstr ""
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr ""
 
-msgid "Publish"
-msgstr ""
-
 msgid "Publish was canceled"
 msgstr ""
 
@@ -9138,6 +9160,63 @@ msgstr ""
 msgid "Jump to webpage"
 msgstr ""
 
+msgid "Material"
+msgstr ""
+
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr ""
+
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
+msgid "Publish 3MF..."
+msgstr ""
+
+msgid "Select which settings to be published in the 3MF file"
+msgstr ""
+
+msgid "Publish 3MF Wiki"
+msgstr ""
+
+msgid "Publish 3MF Video Guide"
+msgstr ""
+
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
+msgid "Full Publish"
+msgstr ""
+
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr ""
+
+msgid "Filter non-selected"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr ""
@@ -9154,6 +9233,9 @@ msgstr ""
 msgid "Detach from parent"
 msgstr ""
 
+msgid "Save without parent"
+msgstr ""
+
 msgid "Unique preset"
 msgstr ""
 
@@ -9803,9 +9885,15 @@ msgstr ""
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr ""
 
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr ""
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr ""
 
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr ""
+
 msgid "Still print by object?"
 msgstr ""
 
@@ -10154,9 +10242,6 @@ msgstr ""
 msgid "Printable space"
 msgstr ""
 
-msgid "Printer Agent"
-msgstr ""
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr ""
 
@@ -10516,12 +10601,6 @@ msgstr ""
 msgid "Capabilities"
 msgstr ""
 
-msgid "Left: "
-msgstr ""
-
-msgid "Right: "
-msgstr ""
-
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
@@ -11325,15 +11404,19 @@ msgstr ""
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr ""
 
+msgid "Downloading new vendor profile(s): "
+msgstr ""
+
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr ""
+
+msgid "Failed to download vendor profile(s): "
+msgstr ""
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr ""
 
-msgid "Configuration package: "
-msgstr ""
-
-msgid " updated to "
-msgstr ""
-
 msgid "Open G-code file:"
 msgstr ""
 
@@ -11389,10 +11472,12 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr ""
 
-msgid "Grouping error: "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
 msgstr ""
 
-msgid " can not be placed in the "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
 msgstr ""
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -11506,6 +11591,9 @@ msgstr ""
 msgid "%1% is too tall, and collisions will be caused."
 msgstr ""
 
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr ""
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr ""
 
@@ -11828,6 +11916,9 @@ msgstr ""
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr ""
 
+msgid "Printer Agent"
+msgstr ""
+
 msgid "Select the network agent implementation for printer communication."
 msgstr ""
 
@@ -12676,6 +12767,9 @@ msgstr ""
 msgid "Concentric"
 msgstr ""
 
+msgid "Spiral Inset"
+msgstr ""
+
 msgid "Hilbert Curve"
 msgstr ""
 
@@ -12745,7 +12839,7 @@ msgid "Top surface fill order"
 msgstr ""
 
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
@@ -12754,7 +12848,7 @@ msgid "Bottom surface fill order"
 msgstr ""
 
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
@@ -12842,6 +12936,12 @@ msgstr ""
 msgid "Clockwise"
 msgstr ""
 
+msgid "Distance to rod"
+msgstr ""
+
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr ""
+
 msgid "Height to rod"
 msgstr ""
 
@@ -14792,6 +14892,15 @@ msgstr ""
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr ""
 
+msgid "Print unsupported walls last"
+msgstr ""
+
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+
 msgid "Outer walls"
 msgstr ""
 
@@ -15201,6 +15310,27 @@ msgstr ""
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr ""
 
+msgid "Wipe inward"
+msgstr ""
+
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+
+msgid "Wipe inward distance"
+msgstr ""
+
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+
 msgid "Wipe before external loop"
 msgstr ""
 
@@ -15441,7 +15571,7 @@ msgstr ""
 msgid "No sparse layers (beta)"
 msgstr ""
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
 msgstr ""
 
 msgid "Prime all printing extruders"
@@ -15462,6 +15592,24 @@ msgstr ""
 msgid "Cyclic"
 msgstr ""
 
+msgid "Cyclic order"
+msgstr ""
+
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+
+msgid "Apply cyclic order to first layer"
+msgstr ""
+
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+
 msgid "Slice gap closing radius"
 msgstr ""
 
@@ -15471,9 +15619,6 @@ msgstr ""
 msgid "Slicing Mode"
 msgstr ""
 
-msgid "Other"
-msgstr ""
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr ""
 
@@ -16376,6 +16521,12 @@ msgstr ""
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr ""
 
+msgid "Strict mode"
+msgstr ""
+
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr ""
+
 msgid "Normative check"
 msgstr ""
 
@@ -16388,10 +16539,22 @@ msgstr ""
 msgid "This outputs the model’s information."
 msgstr ""
 
+msgid "Inspect mesh (JSON to stdout)"
+msgstr ""
+
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr ""
+
+msgid "Inspect paint (JSON to stdout)"
+msgstr ""
+
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr ""
+
 msgid "Export Settings"
 msgstr ""
 
-msgid "This exports settings to a file."
+msgid "This exports settings to a file. Use - to write them to stdout."
 msgstr ""
 
 msgid "Send progress to pipe"
@@ -16448,6 +16611,24 @@ msgstr ""
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
+msgid "Ground largest face"
+msgstr ""
+
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
+msgid "Ground face by normal"
+msgstr ""
+
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
+msgid "Ground face at point"
+msgstr ""
+
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr ""
+
 msgid "Scale the model by a float factor."
 msgstr ""
 
@@ -19333,6 +19514,15 @@ msgstr ""
 msgid "Skipping objects."
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
+msgid "Ratio"
+msgstr ""
+
 msgid "Select Filament"
 msgstr ""
 
@@ -19569,10 +19759,12 @@ msgstr ""
 msgid "Drying-Dehumidifying"
 msgstr ""
 
-msgid " maximum drying temperature is "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
 msgstr ""
 
-msgid " minimum drying temperature is "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
 msgstr ""
 
 msgid "This filament may not be completely dried."
diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po
index bc8e1e9f79..56132eb970 100644
--- a/localization/i18n/es/OrcaSlicer_es.po
+++ b/localization/i18n/es/OrcaSlicer_es.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -2356,15 +2356,6 @@ msgstr "Hay una actualización disponible. Abra el cuadro de diálogo del paquet
 msgid "%s has been removed."
 msgstr "Se ha eliminado %s."
 
-msgid "Switching application language"
-msgstr "Cambiando el idioma de la aplicación"
-
-msgid "Select the language"
-msgstr "Seleccionar el idioma"
-
-msgid "Language"
-msgstr "Idioma"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "No se pudo cambiar Orca Slicer al idioma %s."
@@ -3562,11 +3553,15 @@ msgstr "Retirar el filamento actual en el Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Cambiar de vía en el Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "La temperatura máxima no puede superar "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "La temperatura máxima no puede superar %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "La temperatura mínima no debe ser inferior a "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "La temperatura mínima no debe ser inferior a %d"
 
 msgid "Type to filter..."
 msgstr "Escribe para filtrar..."
@@ -4426,6 +4421,15 @@ msgstr ""
 "Error al copiar el G-Code temporal en el G-Code de salida. ¿Quizás la tarjeta SD está protegida contra escritura?\n"
 "Mensaje de error: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Error al copiar el código G temporal al código G de salida.\n"
+"Mensaje de error: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "La copia del G-Code temporal al G-Code de salida ha fallado. Puede haber un problema con el dispositivo de destino, intenta exportar nuevamente o usa un dispositivo diferente. El G-Code de salida dañado está en %1%.tmp."
@@ -4729,6 +4733,9 @@ msgstr ""
 "Sí - Cambiar estos ajustes y activar el modo espiral automáticamente\n"
 "No - Dejar de usar el modo espiral esta vez"
 
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Imprimiendo"
 
@@ -5153,14 +5160,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "El valor %s está fuera de rango. El rango válido es de %d a %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"¿Es %s%% o %s %s?\n"
-"SÍ para %s%%, \n"
-"NO para %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "¿Es %s%% o %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5182,24 +5186,18 @@ msgstr "Patrón inválido. Use N, N#K, o una lista separada por comas con #K opc
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Formato inválido. Formato de vector esperado: \"%1%\""
 
-msgid "N/A"
-msgstr "N/A"
-
 msgid "System agents"
 msgstr "Agentes del sistema"
 
-msgid "No plugin selected"
-msgstr "Ningún plugin seleccionado"
-
 msgid "Add plugin"
 msgstr "Añadir plugin"
 
-msgid "Select plugin"
-msgstr "Seleccionar plugin"
-
 msgid "Remove plugin"
 msgstr "Eliminar plugin"
 
+msgid "No plugin selected"
+msgstr "Ningún plugin seleccionado"
+
 msgid "Configure"
 msgstr "Configurar"
 
@@ -5453,14 +5451,20 @@ msgstr "Ajustar a óptimo"
 msgid "Regroup filament"
 msgstr "Reagrupar filamentos"
 
-msgid "up to"
-msgstr "hasta"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "hasta %1% mm"
 
-msgid "above"
-msgstr "sobre"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "por encima de %1% mm"
 
-msgid "from"
-msgstr "desde"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "de %1% a %2% mm"
 
 msgid "Usage"
 msgstr "Uso"
@@ -5817,7 +5821,7 @@ msgstr "Volumen:"
 msgid "Size:"
 msgstr "Tamaño:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Se han encontrado conflictos de rutas G-Code en la capa %d, Z = %.2lfmm. Por favor, separe más los objetos en conflicto (%s <-> %s)."
 
@@ -6129,6 +6133,14 @@ msgstr "Guardar proyecto como"
 msgid "Save current project as"
 msgstr "Guardar el proyecto actual como"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publicar 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exportar un archivo 3MF con los ajustes seleccionados incrustados"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importar 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7386,6 +7398,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inferior"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Este ajuste no especifica un tipo de capacidad de plugin."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Este ajuste especifica un tipo de capacidad de plugin no reconocido: "
+
 msgid "Plugin Selection"
 msgstr "Selección de plugins"
 
@@ -7910,6 +7930,14 @@ msgstr "¡Por favor, confirme que el G-Code dentro de los perfiles son seguros p
 msgid "Customized Preset"
 msgstr "Perfil Personalizado"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Algunos ajustes publicados no se han podido aplicar:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Se han cambiado algunas ranuras de filamento:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "¡El nombre de los componentes dentro del archivo de pasos no tiene formato UTF-8!"
 
@@ -8305,6 +8333,21 @@ msgstr "Guardar el archivo laminado como:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "El archivo %s ha sido mandado al almacenamiento de la impresora y puede ser visualizado en la impresora."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publicar archivo 3MF como:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"No se ha podido exportar el archivo 3MF publicado.\n"
+"Compruebe si la carpeta existe en línea o si otros programas tienen el archivo abierto."
+
+msgid "Publish"
+msgstr "Publicar"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "El tipo de boquilla no está establecido. Configure la boquilla e inténtelo de nuevo."
 
@@ -8506,9 +8549,6 @@ msgstr "¿Quieres continuar?"
 msgid "Language selection"
 msgstr "Selección de idiomas"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Cambiando idioma de la aplicación mientras se modifican algunos perfiles."
-
 msgid "Asia-Pacific"
 msgstr "Asia-Pacífico"
 
@@ -8613,6 +8653,9 @@ msgstr "Ruta de Instancia Actual: "
 msgid "General"
 msgstr "General"
 
+msgid "Language"
+msgstr "Idioma"
+
 msgid "Metric"
 msgstr "Métrico"
 
@@ -9038,9 +9081,6 @@ msgstr "Al desplazar el control deslizante de capas en la vista previa laminada,
 msgid "Dimmed layer brightness"
 msgstr "Brillo de las capas atenuadas"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9419,9 +9459,6 @@ msgstr "Ir a la página web de publicación de modelos"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Nota: La preparación puede llevar varios minutos. Por favor, sea paciente."
 
-msgid "Publish"
-msgstr "Publicar"
-
 msgid "Publish was canceled"
 msgstr "La publicación fue cancelada"
 
@@ -9437,6 +9474,81 @@ msgstr "Cargando datos"
 msgid "Jump to webpage"
 msgstr "Ir a la página web"
 
+# AI Translated
+msgid "Material"
+msgstr "Material"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filamento mixto"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Algunos filamentos mixtos dependen de filamentos que no se publicarán:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filamento %d (mixto)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% necesita %2%, que no está habilitado."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% necesita %2%, cuyo material no se publicará."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Para publicar un filamento mixto, habilite todos los filamentos que utiliza y elija Publicación completa o cumpla su requisito de Tipo."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Publicar de todos modos"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publicar 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Seleccione qué ajustes se publicarán en el archivo 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki de Publicar 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Guía en vídeo de Publicar 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filamento mixto - se publica como un conjunto cuando se selecciona \"Habilitar\" arriba"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publicar este filamento mixto y habilitar + publicar completamente sus filamentos componentes"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publicar esta ranura de filamento en el archivo 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Publicación completa"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Incrustar el filamento completo de esta ranura en el archivo 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrar no seleccionados"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Guardar %s como"
@@ -9454,6 +9566,10 @@ msgstr "Copia en este perfil todos los valores heredados del perfil padre y elim
 msgid "Detach from parent"
 msgstr "Separar del elemento padre"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Guardar sin elemento padre"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Perfil único"
@@ -10114,9 +10230,17 @@ msgstr "La torre de purga es necesaria para la detección de aglomeraciones. Pue
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Habilitar tanto la altura Z precisa como la torre de purga puede causar errores de laminado. ¿Desea habilitar la altura Z precisa?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "El timelapse suave necesita una torre de purga en cada capa, lo que no es compatible con \"Sin capas de baja densidad\". Se ha desactivado \"Sin capas de baja densidad\"."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "La torre de purga es necesaria para que el timelapse sea suave. Puede haber defectos en el modelo sin torre de purga. ¿Desea activar la torre de purga?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Sin capas de baja densidad\" no es compatible con el timelapse suave, que necesita una torre de purga en cada capa. El timelapse ha cambiado al modo tradicional."
+
 msgid "Still print by object?"
 msgstr "¿Seguir imprimiendo por objeto?"
 
@@ -10481,9 +10605,6 @@ msgstr "Perfiles de proceso compatibles"
 msgid "Printable space"
 msgstr "Espacio imprimible"
 
-msgid "Printer Agent"
-msgstr "Agente de impresora"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Seleccione la implementación del agente de red para la comunicación con la impresora. Los agentes disponibles se registran al iniciar el sistema."
 
@@ -10882,12 +11003,6 @@ msgstr "Número de extrusores"
 msgid "Capabilities"
 msgstr "Capacidades"
 
-msgid "Left: "
-msgstr "Izquierda: "
-
-msgid "Right: "
-msgstr "Derecha: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Mostrar todos los perfiles (incluyendo los compatibles)"
 
@@ -11705,15 +11820,22 @@ msgstr "Reparación cancelada"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "La copia del archivo %1% a %2% falló: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Descargando nuevos perfiles de fabricante: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Paquete de configuración: %1% actualizado a %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "No se han podido descargar los perfiles de fabricante: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Es necesario comprobar los cambios no guardados antes de actualizar la configuración."
 
-msgid "Configuration package: "
-msgstr "Paquete de configuración: "
-
-msgid " updated to "
-msgstr " Actualizado a "
-
 msgid "Open G-code file:"
 msgstr "Abrir archivo G-Code:"
 
@@ -11773,11 +11895,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping solo es compatible con Klipper, RepRapFirmware y Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Error de agrupación: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Error de agrupación: %1% no se puede colocar en la boquilla izquierda"
 
-msgid " can not be placed in the "
-msgstr " no se puede colocar en el "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Error de agrupación: %1% no se puede colocar en la boquilla derecha"
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
 msgstr "Error de agrupación en modo manual. Compruebe el número de boquillas o vuelva a agrupar."
@@ -11890,6 +12016,10 @@ msgstr "%1% está demasiado cerca de otros, y pueden producirse colisiones."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% es demasiado alto, y se producirán colisiones."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "La posición relativa del modelo y la torre de purga no cumple los requisitos de la función \"Sin capas de baja densidad\". Ajuste sus posiciones relativas, reduzca la altura del modelo o desactive \"Sin capas de baja densidad\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " está muy cerca del área de exclusión, puede conllevar colisiones cuando se imprime."
 
@@ -12225,6 +12355,9 @@ msgstr "Utiliza 3MF en lugar de G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Activa esta opción si la impresora admite un archivo 3MF como trabajo de impresión. Cuando está activada, Orca Slicer envía el archivo cortado como un archivo .gcode.3mf, en lugar de como un archivo .gcode convencional."
 
+msgid "Printer Agent"
+msgstr "Agente de impresora"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Seleccione la implementación del agente de red para la comunicación con la impresora."
 
@@ -13270,6 +13403,10 @@ msgstr "Rectilíneo Alineado"
 msgid "Concentric"
 msgstr "Concéntrico"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Espiral interior"
+
 msgid "Hilbert Curve"
 msgstr "Curva de Hilbert"
 
@@ -13349,26 +13486,28 @@ msgstr ""
 msgid "Top surface fill order"
 msgstr "Orden de relleno de la superficie superior"
 
+# AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Dirección en la que se rellenan las superficies superiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n"
-"Hacia afuera comienza en el centro de la superficie, de modo que cualquier exceso de material se empuja hacia el borde, donde es menos visible. Hacia adentro comienza en el borde y termina con las curvas cerradas del centro.\n"
-"Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección."
+"Dirección en la que se rellenan las superficies superiores cuando se usa un patrón basado en el centro (Concéntrico, Espiral interior, Espiral de Arquímedes, Espiral Octagonal).\n"
+"Hacia fuera empieza en el centro de la superficie, de modo que el material sobrante se empuja hacia el borde, donde resulta menos visible. Hacia dentro empieza en el borde y termina con las curvas cerradas del centro.\n"
+"Por defecto usa el orden de ruta más corta, que puede recorrerse en cualquiera de los dos sentidos."
 
 msgid "Bottom surface fill order"
 msgstr "Orden de relleno de la superficie inferior"
 
+# AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Dirección en la que se rellenan las superficies inferiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n"
-"Hacia adentro comienza cada superficie con las curvas exteriores más amplias, lo que mejora la adherencia de la primera capa en las camas donde las curvas cerradas del centro pueden no adherirse. Hacia afuera comienza en el centro, empujando cualquier exceso de material hacia el borde.\n"
-"Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección."
+"Dirección en la que se rellenan las superficies inferiores cuando se usa un patrón basado en el centro (Concéntrico, Espiral interior, Espiral de Arquímedes, Espiral Octagonal).\n"
+"Hacia dentro empieza cada superficie por las curvas exteriores más amplias, lo que mejora la adhesión de la capa inicial en camas donde las curvas cerradas del centro pueden no agarrar. Hacia fuera empieza en el centro y empuja el material sobrante hacia el borde.\n"
+"Por defecto usa el orden de ruta más corta, que puede recorrerse en cualquiera de los dos sentidos."
 
 msgid "Internal solid infill pattern"
 msgstr "Patrón de relleno sólido interno"
@@ -13467,6 +13606,14 @@ msgstr "En sentido contrario a las agujas del reloj"
 msgid "Clockwise"
 msgstr "En el sentido de las agujas del reloj"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Distancia a la varilla"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Distancia horizontal de la punta de la boquilla al borde más alejado de la varilla. Se usa para evitar colisiones en la impresión por objeto."
+
 msgid "Height to rod"
 msgstr "Altura a la barra"
 
@@ -15593,6 +15740,20 @@ msgstr "Detectar perímetros en voladizo"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Detecta el porcentaje de voladizo en relación con el ancho de línea y utiliza diferentes velocidades para imprimir. Para el 100%% de voladizo, se utiliza la velocidad de puente."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Imprimir al final los perímetros sin soporte"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Los bucles de perímetro que quedan completamente en el aire se imprimen cuando algo puede sostenerlos:\n"
+"se extruyen después de los demás perímetros de su isla, empezando por el más interno, sea cual sea el orden de perímetros.\n"
+"Un bucle que solo pueden anclar los puentes de esta capa espera a que se impriman esos puentes, mientras que un bucle que discurre junto a un perímetro con soporte mantiene su lugar antes del relleno, que lo necesita como anclaje."
+
 msgid "Outer walls"
 msgstr "Paredes exteriores"
 
@@ -16020,6 +16181,39 @@ msgstr "Purgado en contornos curvos"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Para minimizar la visibilidad de la costura en un contorno curvo cerrado, se ejecuta un pequeño movimiento hacia dentro antes de que el extrusor abandone la curva."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Purgado hacia dentro"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Se aplica solo a los perímetros externos, incluidos los contornos de los agujeros. Durante el purgado mueve la boquilla caliente hacia los perímetros internos ya impresos para reducir el recalentamiento del plástico recién depositado y las marcas de costura.\n"
+"\n"
+"Es especialmente útil con alturas de capa por debajo de 0,1 mm, donde las marcas de purgado se ven más.\n"
+"\n"
+"Usa el purgado normal si no hay ningún perímetro interno contiguo ya impreso (zonas de un solo perímetro u orden de perímetros Exterior/Interior) o si no se encuentra ninguna trayectoria hacia dentro con apoyo, por ejemplo en esquinas cerradas o huecos de costura."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Distancia de purgado hacia dentro"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Distancia que se desplaza la trayectoria de purgado alejándose del perímetro externo, indicada en milímetros o como porcentaje del ancho de extrusión real del perímetro externo.\n"
+"\n"
+"Por ejemplo, 50% desplaza la trayectoria la mitad del ancho del perímetro externo. El desplazamiento efectivo está limitado tanto por el ancho real del perímetro externo como por el espacio disponible hasta el perímetro contiguo, por lo que valores por encima de 100% o una distancia absoluta equivalente no tienen ningún efecto adicional. Ponga 0 para desactivar el desplazamiento."
+
 msgid "Wipe before external loop"
 msgstr "Purgado antes del bucle externo"
 
@@ -16279,8 +16473,9 @@ msgstr "Recoge la nueva herramienta sin esperar a que alcance la temperatura de
 msgid "No sparse layers (beta)"
 msgstr "Sin capas de baja densidad (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Sí está activado, la torre de purga no se imprimirá en las capa sin cambio de cabezal. En las capas con cambio de cabezal, viajará hacía abajo para imprimir la torre de purga. El usuario es responsable de asegurarse que no hay colisiones con la impresión."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Si se habilita, la torre de purga no se imprimirá en las capas sin cambios de herramienta. En las capas con un cambio de herramienta, el extrusor bajará para imprimir la torre de purga, de modo que la torre queda por debajo del modelo y el cabezal tiene que descender hasta ella. Se rechazan las disposiciones en las que eso chocaría con un objeto ya impreso. No tiene efecto con el timelapse suave ni con la detección de atascos en la boquilla, que necesitan una torre en cada capa."
 
 msgid "Prime all printing extruders"
 msgstr "Purgar todos los extrusores"
@@ -16303,6 +16498,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cíclico"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Orden cíclico"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Secuencia de filamentos personalizada que usa el orden cíclico de cambios de herramienta, como números de filamento separados por comas (p. ej. \"3,2,1,4\").\n"
+"Cada capa imprime sus filamentos siguiendo esta secuencia; los filamentos no incluidos se imprimen al final, en orden ascendente.\n"
+"Déjelo vacío para recorrer los filamentos en orden ascendente."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Aplicar el orden cíclico a la capa inicial"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Aplica el orden cíclico de cambios de herramienta también a la capa inicial.\n"
+"Por defecto está desactivado, porque la capa inicial se ordena en su lugar para lograr la mejor adhesión a la cama: los filamentos que imprimen detalles pequeños y frágiles de la capa inicial se imprimen al final, de modo que los cambios de herramienta y desplazamientos posteriores tienen menos probabilidad de arrancar esas piezas mal ancladas. Este orden de la capa inicial también respeta una secuencia de filamentos personalizada para la capa inicial cuando se ha definido. La ventaja del orden cíclico (los cambios de herramienta adicionales dan a cada capa más tiempo para enfriarse) no se aplica a la capa inicial, que se imprime despacio y caliente para favorecer la adhesión.\n"
+"Active esta opción solo si necesita exactamente la misma secuencia de herramientas en todas las capas, incluida la primera, a costa de esa optimización de la adhesión."
+
 msgid "Slice gap closing radius"
 msgstr "Radio de cierre de laminado"
 
@@ -16312,9 +16535,6 @@ msgstr "Las grietas más pequeñas que 2x el radio de cierre se rellenan durante
 msgid "Slicing Mode"
 msgstr "Modo de laminado"
 
-msgid "Other"
-msgstr "Otro"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Utilice \"Par-impar\" para los modelos de avión de 3DLabPrint. Utilice \"Cerrar orificios\" para cerrar todos los orificios del modelo."
 
@@ -17288,6 +17508,14 @@ msgstr "No comprobar"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "No ejecute ninguna comprobación de validez, como la comprobación de conflictos de ruta de G-Code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Modo estricto"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Sale con un código distinto de cero cuando el laminado genera un aviso no crítico que de otro modo solo se registraría, como un modelo que necesita soportes mientras los soportes están desactivados. Úselo en CI o en procesos automatizados que nunca deban entregar un laminado sutilmente defectuoso. Cada uno de esos avisos también aparece con una clase estable en el array `warnings` de result.json, que solo se escribe en Linux. No se puede combinar con --no-check, que omite la comprobación de soportes."
+
 msgid "Normative check"
 msgstr "Comprobación de normativa"
 
@@ -17300,11 +17528,28 @@ msgstr "Información del modelo de salida"
 msgid "This outputs the model’s information."
 msgstr "Salida de la información del modelo."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Inspeccionar malla (JSON por stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Imprime por stdout un resumen JSON de cada objeto cargado y después sale: sus cajas envolventes y las caras de su envolvente convexa sobre las que puede apoyarse, con sus normales, áreas y centros. Estas son las caras entre las que eligen las opciones --ground-*. Alternativa legible por máquina a --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Inspeccionar pintado (JSON por stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Imprime un resumen JSON estructurado de cada capa pintada (soportes, costura, color MMU, piel rugosa) ya guardada en el modelo cargado — número de facetas, área de superficie y caja envolvente local a la malla por cada estado — y después sale. Alternativa legible por máquina a abrir las herramientas de pintado en la interfaz."
+
 msgid "Export Settings"
 msgstr "Ajustes de exportación"
 
-msgid "This exports settings to a file."
-msgstr "Exporta los ajustes a un archivo."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Esto exporta los ajustes a un archivo. Use - para escribirlos por stdout."
 
 msgid "Send progress to pipe"
 msgstr "Enviar el progreso a la tubería"
@@ -17360,6 +17605,30 @@ msgstr "Rotar alrededor de Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "El ángulo de rotación alrededor del eje Y en grados."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Apoyar sobre la cara mayor"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoya cada objeto sobre la cara mayor de su envolvente convexa y lo deja caer sobre la cama. Entre caras igual de grandes se conserva la que ya mira hacia abajo. Los objetos sin una cara lo bastante grande para apoyarse se dejan como están. Las transformaciones se aplican en el orden de la línea de órdenes, por lo que se respetan las rotaciones indicadas antes de esta opción. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Apoyar sobre la cara según la normal"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoya cada objeto sobre la cara de su envolvente convexa cuya normal exterior sea la más próxima a la dirección NX,NY,NZ y lo deja caer sobre la cama. La dirección está en coordenadas del objeto, que incluyen las rotaciones indicadas antes de esta opción y coinciden con los ejes de la bandeja salvo que el archivo de entrada rote el objeto. Por ejemplo, 1,0,0 apoya el objeto sobre su lado +X. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Apoyar sobre la cara en un punto"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoya cada objeto sobre la cara de su envolvente convexa que contiene el punto X,Y,Z y lo deja caer sobre la cama. El punto está en coordenadas del objeto, que incluyen las rotaciones indicadas antes de esta opción; --inspect-mesh indica los centros de las caras en esas coordenadas. Los objetos sin una cara así se dejan como están, y la ejecución falla si ningún objeto tiene una. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación."
+
 msgid "Scale the model by a float factor."
 msgstr "Escala el modelo por un factor de flotación."
 
@@ -20409,6 +20678,18 @@ msgstr "Esta acción no se puede deshacer. ¿Continuar?"
 msgid "Skipping objects."
 msgstr "Omitiendo objetos."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Proporción de material"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Altura del modelo"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proporción"
+
 msgid "Select Filament"
 msgstr "Seleccionar Filamento"
 
@@ -20648,11 +20929,15 @@ msgstr "Secado - Calentamiento"
 msgid "Drying-Dehumidifying"
 msgstr "Secado - Deshumidificación"
 
-msgid " maximum drying temperature is "
-msgstr " la temperatura máxima de secado es "
+# AI Translated
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "La temperatura máxima de secado de %s es %d°C."
 
-msgid " minimum drying temperature is "
-msgstr " la temperatura mínima de secado es "
+# AI Translated
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "La temperatura mínima de secado de %s es %d°C."
 
 msgid "This filament may not be completely dried."
 msgstr "Es posible que este filamento no esté completamente seco."
@@ -21065,6 +21350,90 @@ msgstr ""
 "Evita la deformación\n"
 "¿Sabías que al imprimir materiales propensos a la deformación como el ABS, aumentar adecuadamente la temperatura de la cama térmica puede reducir la probabilidad de deformaciones?"
 
+#~ msgid "Other"
+#~ msgstr "Otro"
+
+#~ msgid "Left: "
+#~ msgstr "Izquierda: "
+
+#~ msgid "Right: "
+#~ msgstr "Derecha: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "La temperatura máxima no puede superar "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "La temperatura mínima no debe ser inferior a "
+
+#~ msgid "up to"
+#~ msgstr "hasta"
+
+#~ msgid "above"
+#~ msgstr "sobre"
+
+#~ msgid "from"
+#~ msgstr "desde"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Paquete de configuración: "
+
+#~ msgid " updated to "
+#~ msgstr " Actualizado a "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Error de agrupación: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " no se puede colocar en el "
+
+#~ msgid " maximum drying temperature is "
+#~ msgstr " la temperatura máxima de secado es "
+
+#~ msgid " minimum drying temperature is "
+#~ msgstr " la temperatura mínima de secado es "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "necesita"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "no habilitado"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "material no publicado"
+
+#~ msgid "Select the language"
+#~ msgstr "Seleccionar el idioma"
+
+#~ msgid "Select plugin"
+#~ msgstr "Seleccionar plugin"
+
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Dirección en la que se rellenan las superficies superiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n"
+#~ "Hacia afuera comienza en el centro de la superficie, de modo que cualquier exceso de material se empuja hacia el borde, donde es menos visible. Hacia adentro comienza en el borde y termina con las curvas cerradas del centro.\n"
+#~ "Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección."
+
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Dirección en la que se rellenan las superficies inferiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n"
+#~ "Hacia adentro comienza cada superficie con las curvas exteriores más amplias, lo que mejora la adherencia de la primera capa en las camas donde las curvas cerradas del centro pueden no adherirse. Hacia afuera comienza en el centro, empujando cualquier exceso de material hacia el borde.\n"
+#~ "Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Sí está activado, la torre de purga no se imprimirá en las capa sin cambio de cabezal. En las capas con cambio de cabezal, viajará hacía abajo para imprimir la torre de purga. El usuario es responsable de asegurarse que no hay colisiones con la impresión."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exporta los ajustes a un archivo."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "La función de visualización en directo nativa de Wayland requiere el receptor de vídeo GTK de GStreamer. Instale el plugin gtksink para GStreamer y, a continuación, reinicie OrcaSlicer."
 
diff --git a/localization/i18n/eu/OrcaSlicer_eu.po b/localization/i18n/eu/OrcaSlicer_eu.po
index 9ee2e6451d..a510fcd436 100644
--- a/localization/i18n/eu/OrcaSlicer_eu.po
+++ b/localization/i18n/eu/OrcaSlicer_eu.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-07-20 13:33+0200\n"
 "Last-Translator: Manu Goiogana <mgoiogana@gmail.com>\n"
 "Language-Team: \n"
@@ -2390,15 +2390,6 @@ msgstr "Eguneratze bat dago erabilgarri. Ireki aurrezarpen-paketeen elkarrizketa
 msgid "%s has been removed."
 msgstr "%s kendu da."
 
-msgid "Switching application language"
-msgstr "Aplikazioaren hizkuntza aldatzen"
-
-msgid "Select the language"
-msgstr "Hautatu hizkuntza"
-
-msgid "Language"
-msgstr "Hizkuntza"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "Ezin izan da OrcaSlicer %s hizkuntzara aldatu."
@@ -3601,11 +3592,15 @@ msgstr "Atzera erakarri uneko filamentua Filament Track Switch-en"
 msgid "Switch track at Filament Track Switch"
 msgstr "Aldatu bidea Filament Track Switch-en"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Gehieneko tenperaturak ezin du hau gainditu: "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Gehieneko tenperaturak ezin du %d gainditu"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Gutxieneko tenperaturak ezin du hau baino txikiagoa izan: "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Gutxieneko tenperaturak ezin du %d baino txikiagoa izan"
 
 msgid "Type to filter..."
 msgstr "Idatzi iragazteko..."
@@ -4472,6 +4467,15 @@ msgstr ""
 "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Agian SD txartela idazteko blokeatuta dago?\n"
 "Errore- mezua: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Huts egin du aldi baterako G-kodea irteerako G-kodera kopiatzeak.\n"
+"Errore-mezua: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Arazoak egon daitezke helburuko gailuarekin, saiatu berriro esportatzen edo beste gailu bat erabiltzen. Hondatutako irteerako G-code-a hemen da: %1%.tmp."
@@ -4771,6 +4775,9 @@ msgstr ""
 "Bai - Aldatu ezarpen hauek eta gaitu espiral/loreontzi modua automatikoki\n"
 "Ez  - Utzi bertan behera espiral modua gaitzea"
 
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Inprimatzen"
 
@@ -5201,14 +5208,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "%s balioa tartetik kanpo dago. Baliozko tartea %d eta %d artekoa da."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%% edo %s %s da?\n"
-"BAI %s%%-(r)entzat,\n"
-"EZ %s %s-(r)entzat."
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%% edo %s %s da?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5231,24 +5235,18 @@ msgstr "Patroi baliogabea. Erabili N, N#K edo komaz bereizitako zerrenda bat, sa
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Formatuak ez du balio. Espero den formatu bektoriala: \"%1%\""
 
-msgid "N/A"
-msgstr "N/A"
-
 msgid "System agents"
 msgstr "Sistema-agenteak"
 
-msgid "No plugin selected"
-msgstr "Ez da pluginik hautatu"
-
 msgid "Add plugin"
 msgstr "Gehitu plugina"
 
-msgid "Select plugin"
-msgstr "Hautatu plugina"
-
 msgid "Remove plugin"
 msgstr "Kendu plugina"
 
+msgid "No plugin selected"
+msgstr "Ez da pluginik hautatu"
+
 msgid "Configure"
 msgstr "Konfiguratu"
 
@@ -5502,14 +5500,20 @@ msgstr "Ezarri optimo gisa"
 msgid "Regroup filament"
 msgstr "Taldekatu berriro filamentua"
 
-msgid "up to"
-msgstr "honaino"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "%1% mm arte"
 
-msgid "above"
-msgstr "honen gainean"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "%1% mm-tik gora"
 
-msgid "from"
-msgstr "hemendik"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "%1% mm-tik %2% mm-ra"
 
 msgid "Usage"
 msgstr "Erabilera"
@@ -5867,7 +5871,7 @@ msgstr "Bolumena:"
 msgid "Size:"
 msgstr "Tamaina:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "G-code ibilbideen gatazkak aurkitu dira %d geruzan, Z = %.2lf mm. Urrundu gehiago gatazkan dauden objektuak (%s <-> %s)."
 
@@ -6175,6 +6179,14 @@ msgstr "Gorde proiektua honela"
 msgid "Save current project as"
 msgstr "Gorde uneko proiektua honela"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Argitaratu 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Esportatu 3MF fitxategi bat hautatutako ezarpenak kapsulatuta dituela"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Inportatu 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7433,6 +7445,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Behea"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Ezarpen honek ez du plugin-gaitasun motarik zehazten."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Ezarpen honek ezagutzen ez den plugin-gaitasun mota bat zehazten du: "
+
 msgid "Plugin Selection"
 msgstr "Plugin-hautaketa"
 
@@ -7988,6 +8008,14 @@ msgstr "Berretsi aurrezarpen hauetako G-codea segurua dela, makinari kalterik ez
 msgid "Customized Preset"
 msgstr "Aurrezarpen pertsonalizatua"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Argitaratutako ezarpen batzuk ezin izan dira aplikatu:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Filamentu-erreten batzuk aldatu dira:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "STEP fitxategiko osagai-izena(k) ez dago/daude UTF-8 formatuan!"
 
@@ -8388,6 +8416,21 @@ msgstr "Gorde xerratutako fitxategia honela:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "%s fitxategia inprimagailuaren biltegiratze-eremura bidali da eta inprimagailuan ikus daiteke."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Argitaratu 3MF fitxategia honela:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Huts egin du argitaratutako 3MF fitxategia esportatzeak.\n"
+"Egiaztatu karpeta linean dagoen edo beste programa batzuek fitxategia irekita duten."
+
+msgid "Publish"
+msgstr "Argitaratu"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Pita mota ez dago ezarrita. Ezarri pita eta saiatu berriro."
 
@@ -8587,9 +8630,6 @@ msgstr "Jarraitu nahi duzu?"
 msgid "Language selection"
 msgstr "Hizkuntza-hautaketa"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Aplikazioaren hizkuntza aldatzen ari da aurrezarpen batzuk aldatuta dauden bitartean."
-
 msgid "Asia-Pacific"
 msgstr "Asia-Pazifikoa"
 
@@ -8694,6 +8734,9 @@ msgstr "Uneko instantziaren bide-izena: "
 msgid "General"
 msgstr "Orokorra"
 
+msgid "Language"
+msgstr "Hizkuntza"
+
 msgid "Metric"
 msgstr "Metrikoa"
 
@@ -9122,9 +9165,6 @@ msgstr "Xerratutako aurrebistan geruza-graduatzailea mugitzean, unekoaren azpiko
 msgid "Dimmed layer brightness"
 msgstr "Ilundutako geruzen distira"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9505,9 +9545,6 @@ msgstr "Joan modeloa argitaratzeko web-orrira"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Oharra: prestaketak minutu batzuk iraun ditzake. Izan pazientzia."
 
-msgid "Publish"
-msgstr "Argitaratu"
-
 msgid "Publish was canceled"
 msgstr "Argitaratzea bertan behera utzi da"
 
@@ -9523,6 +9560,81 @@ msgstr "Datuak igotzen"
 msgid "Jump to webpage"
 msgstr "Joan web-orrira"
 
+# AI Translated
+msgid "Material"
+msgstr "Materiala"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filamentu nahasia"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Filamentu nahasi batzuk argitaratuko ez diren filamentuen mende daude:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "%d filamentua (nahasia)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% filamentuak %2% behar du, baina ez dago gaituta."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% filamentuak %2% behar du, baina haren materiala ez da argitaratuko."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Filamentu nahasi bat argitaratzeko, gaitu erabiltzen dituen filamentu guztiak eta hautatu Argitalpen osoa edo bete bere Mota baldintza."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Argitaratu hala ere"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Argitaratu 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Hautatu zein ezarpen argitaratuko diren 3MF fitxategian"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF argitaratzeko wikia"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF argitaratzeko bideo-gida"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filamentu nahasia - osorik argitaratzen da goian \"Gaitu\" hautatuta dagoenean"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Argitaratu filamentu nahasi hau eta gaitu + argitaratu osorik bere osagai diren filamentuak"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Argitaratu filamentu-erreten hau 3MF fitxategian"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Argitalpen osoa"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Kapsulatu erreten honetako filamentu osoa 3MF fitxategian"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Iragazi hautatu gabeak"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Gorde %s honela"
@@ -9540,6 +9652,10 @@ msgstr "Aurrezarpen honetara gurasoaren balio heredatu guztiak kopiatzen ditu et
 msgid "Detach from parent"
 msgstr "Bereizi gurasotik"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Gorde gurasorik gabe"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Aurrezarpen bakarra"
@@ -10221,9 +10337,17 @@ msgstr "Purgatze-dorrea behar da material-metaketa detektatzeko. Modeloak akatsa
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Z altuera zehatza eta purgatze-dorrea batera gaitzeak xerratze-erroreak eragin ditzake. Hala ere Z altuera zehatza gaitu nahi duzu?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Timelapse leunak purgatze-dorrea behar du geruza guztietan, eta hori ez da bateragarria \"Geruza bakandurik ez\" aukerarekin. \"Geruza bakandurik ez\" desaktibatu da."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Purgatze-dorrea behar da timelapse leunaren modurako. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Purgatze-dorrea gaitu nahi duzu?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Geruza bakandurik ez\" ez da bateragarria timelapse leunarekin, horrek purgatze-dorrea behar baitu geruza guztietan. Timelapsea modu tradizionalera aldatu da."
+
 msgid "Still print by object?"
 msgstr "Objektuka inprimatu hala ere?"
 
@@ -10593,9 +10717,6 @@ msgstr "Prozesu-profil bateragarriak"
 msgid "Printable space"
 msgstr "Inprimatzeko espazioa"
 
-msgid "Printer Agent"
-msgstr "Inprimagailu-agentea"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Hautatu sare-agentearen inplementazioa inprimagailuarekin komunikatzeko. Erabilgarri dauden agenteak abioan erregistratzen dira."
 
@@ -10989,12 +11110,6 @@ msgstr "Estrusore kopurua"
 msgid "Capabilities"
 msgstr "Gaitasunak"
 
-msgid "Left: "
-msgstr "Ezkerra: "
-
-msgid "Right: "
-msgstr "Eskuina: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Erakutsi aurrezarpen guztiak (bateraezinak barne)"
 
@@ -11825,15 +11940,22 @@ msgstr "Konponketa bertan behera utzi da"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "%1% fitxategia %2% helmugara kopiatzeak huts egin du: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Hornitzaileen profil berriak deskargatzen: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Konfigurazio-paketea: %1% %2% bertsiora eguneratu da"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Huts egin du hornitzaileen profilak deskargatzeak: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Egiaztatu gorde gabeko aldaketarik dagoen konfigurazioa eguneratu aurretik."
 
-msgid "Configuration package: "
-msgstr "Konfigurazio-paketea: "
-
-msgid " updated to "
-msgstr " hona eguneratu da: "
-
 msgid "Open G-code file:"
 msgstr "Ireki G-code fitxategia:"
 
@@ -11893,11 +12015,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Sarrera-moldaketa Klipperrek, RepRapFirmwarek eta Marlin 2k soilik onartzen dute."
 
-msgid "Grouping error: "
-msgstr "Taldekatze-errorea: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Taldekatze-errorea: %1% ezin da ezkerreko pitan jarri"
 
-msgid " can not be placed in the "
-msgstr " ezin da hemen kokatu: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Taldekatze-errorea: %1% ezin da eskuineko pitan jarri"
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
 msgstr "Taldekatze-errorea eskuzko moduan. Egiaztatu pita kopurua edo taldekatu berriro."
@@ -12010,6 +12136,10 @@ msgstr "%1% besteetatik gertuegi dago, eta talkak sor daitezke."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% altuegia da, eta talkak sortuko dira."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Modeloaren eta purgatze-dorrearen kokapen erlatiboak ez ditu betetzen \"Geruza bakandurik ez\" funtzioaren baldintzak. Doitu haien kokapen erlatiboa, jaitsi modeloaren altuera edo desaktibatu \"Geruza bakandurik ez\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " baztertze-eremutik gertuegi dago; talkak egon daitezke inprimatzean."
 
@@ -12356,6 +12486,9 @@ msgstr "Erabili 3MF G-codearen ordez"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Gaitu aukera hau inprimagailuak 3MF fitxategi bat inprimatze-lan gisa onartzen badu. Gaituta dagoenean, OrcaSlicerrek xerratutako fitxategia .gcode.3mf gisa bidaltzen du, .gcode fitxategi arrunt baten ordez."
 
+msgid "Printer Agent"
+msgstr "Inprimagailu-agentea"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Hautatu inprimagailuarekin komunikatzeko sare-agentearen inplementazioa."
 
@@ -13403,6 +13536,10 @@ msgstr "Lerrozuzen lerrokatua"
 msgid "Concentric"
 msgstr "Kontzentrikoa"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Kiribil-barneratzea"
+
 msgid "Hilbert Curve"
 msgstr "Hilbert kurba"
 
@@ -13488,26 +13625,26 @@ msgstr "Goiko gainazala betetzeko ordena"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Goiko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
-"Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n"
-"Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
+"Goiko gainazalak zein norabidetan betetzen diren erdigunetik abiatzen den patroi bat erabiltzean (Kontzentrikoa, Kiribil-barneratzea, Arkimedesen kordak, Oktagrama-kiribila).\n"
+"Kanporantz gainazalaren erdigunean hasten da, eta, hala, soberako materiala ertzerantz bultzatzen da, non gutxien ikusten den. Barrurantz ertzean hasten da eta erdiguneko kurba estuekin amaitzen da.\n"
+"Lehenetsia bide laburrenaren ordena erabiltzen du, eta bi norabideetako edozeinetan joan daiteke."
 
 msgid "Bottom surface fill order"
 msgstr "Beheko gainazala betetzeko ordena"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
-"Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n"
-"Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
+"Beheko gainazalak zein norabidetan betetzen diren erdigunetik abiatzen den patroi bat erabiltzean (Kontzentrikoa, Kiribil-barneratzea, Arkimedesen kordak, Oktagrama-kiribila).\n"
+"Barrurantz gainazal bakoitza kanpoko kurba zabalagoekin hasten da, eta horrek lehen geruzaren itsaspena hobetzen du erdiguneko kurba estuak ondo itsasten ez diren oheetan. Kanporantz erdigunean hasten da, eta soberako materiala ertzerantz bultzatzen du.\n"
+"Lehenetsia bide laburrenaren ordena erabiltzen du, eta bi norabideetako edozeinetan joan daiteke."
 
 # AI Translated
 msgid "Internal solid infill pattern"
@@ -13609,6 +13746,14 @@ msgstr "Erlojuaren kontrako noranzkoa"
 msgid "Clockwise"
 msgstr "Erlojuaren noranzkoa"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Barrarainoko distantzia"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Pitaren muturretik barraren urrunen dagoen ertzerainoko distantzia horizontala. Objektuka inprimatzean talkak saihesteko erabiltzen da."
+
 msgid "Height to rod"
 msgstr "Hagaxkarainoko altuera"
 
@@ -15763,6 +15908,20 @@ msgstr "Detektatu irtengune-hormak"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Honek irtenguneen ehunekoa detektatzen du lerro-zabalerarekiko eta abiadura desberdina erabiltzen du. 100%%-eko irtengunean zubi-abiadura erabiltzen da."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Inprimatu azkenik euskarririk gabeko hormak"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Erabat airean dauden hormako begiztak zerbaitek eutsi diezaiekeenean inprimatzen dira:\n"
+"beren uhartearen gainerako hormen ondoren estruitzen dira, barrukoenetik hasita, hormen ordena edozein dela ere.\n"
+"Geruza honetako zubiek soilik ainguratu dezaketen begizta batek zubi horiek inprimatu arte itxaroten du; euskarria duen horma baten ondotik doan begiztak, berriz, betegarriaren aurreko lekuari eusten dio, betegarriak aingura gisa behar baitu."
+
 msgid "Outer walls"
 msgstr "Kanpoko hormak"
 
@@ -16192,6 +16351,39 @@ msgstr "Garbitu begiztetan"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Begizta itxiko estrusio batean josturaren ikusgarritasuna minimizatzeko, barruranzko mugimendu txiki bat egiten da estrusoreak begizta utzi aurretik."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Purgatu barrurantz"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Kanpoko hormei soilik aplikatzen zaie, zuloen mugak barne. Purgatzean pita beroa jada inprimatutako barruko hormetarantz mugitzen du, inprimatu berri den plastikoa berriro berotzea eta jostura-markak murrizteko.\n"
+"\n"
+"Bereziki erabilgarria da 0,1 mm-tik beherako geruza-altueretan, non purgatze-markak nabarmenago ikusten diren.\n"
+"\n"
+"Purgatze arrunta erabiltzen du ondoko barruko hormarik jada inprimatuta ez badago (horma bakarreko eremuak edo Kanpokoa/Barrukoa hormen ordena) edo euskarria duen barrurako biderik aurkitzen ez bada, adibidez izkina estuetan edo josturako hutsuneetan."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Barrurako purgatze-distantzia"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Purgatze-bidea kanpoko perimetrotik zenbat desplazatzen den, milimetrotan edo kanpoko hormaren benetako estrusio-zabaleraren ehuneko gisa adierazita.\n"
+"\n"
+"Adibidez, 50% bideak kanpoko hormaren zabaleraren erdia desplazatzen du. Desplazamendu eraginkorra mugatuta dago bai kanpoko hormaren benetako zabaleragatik bai ondoko hormarainoko tarte erabilgarriagatik; beraz, 100% baino handiagoko balioek edo baliokidea den distantzia absolutu batek ez dute eragin gehigarririk. Ezarri 0 desplazamendua desgaitzeko."
+
 msgid "Wipe before external loop"
 msgstr "Garbitu kanpoko begizta baino lehen"
 
@@ -16451,8 +16643,9 @@ msgstr "Hartu erreminta berria inprimatze-tenperaturara iritsi arte itxaron gabe
 msgid "No sparse layers (beta)"
 msgstr "Geruza bakandurik ez (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Gaituta badago, purgatze-dorrea ez da inprimatuko tresna-aldaketarik ez duten geruzetan. Tresna-aldaketa duten geruzetan, estrusorea beherantz mugituko da purgatze-dorrea inprimatzeko. Erabiltzailearen ardura da inprimaketarekin talkarik ez dagoela ziurtatzea."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Gaituz gero, purgatze-dorrea ez da inprimatuko erreminta-aldaketarik ez duten geruzetan. Erreminta-aldaketa duten geruzetan, estrusorea behera joango da purgatze-dorrea inprimatzera; beraz, dorrea modeloaren azpian geratzen da eta inprimatze-buruak beheraino iritsi behar du. Jada inprimatutako objektu batekin talka egingo luketen antolamenduak baztertu egiten dira. Ez du eraginik timelapse leunarekin edo pitaren pilaketa-detekzioarekin, horiek geruza guztietan dorrea behar baitute."
 
 msgid "Prime all printing extruders"
 msgstr "Primatu inprimatzeko estrusore guztiak"
@@ -16475,6 +16668,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Ziklikoa"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ordena ziklikoa"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Erreminta-aldaketen ordena ziklikoak erabiltzen duen filamentu-sekuentzia pertsonalizatua, filamentu-zenbakiak komaz bereizita (adib. \"3,2,1,4\").\n"
+"Geruza bakoitzak sekuentzia horri jarraituz inprimatzen ditu bere filamentuak; zerrendatu gabeko filamentuak azkenik inprimatzen dira, gorantz ordenatuta.\n"
+"Utzi hutsik filamentuak gorantz ordenatuta zeharkatzeko."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Aplikatu ordena ziklikoa lehen geruzari"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Erreminta-aldaketen ordena ziklikoa lehen geruzari ere aplikatzen dio.\n"
+"Lehenespenez desgaituta dago, lehen geruza ohean ahalik eta ondoen itsasteko ordenatzen baita: lehen geruzako elementu txiki eta hauskorrak inprimatzen dituzten filamentuak azkenik inprimatzen dira, hala ondorengo erreminta-aldaketek eta desplazamenduek nekezago askatuko baitituzte ahul ainguratutako zati horiek. Lehen geruzaren ordena horrek lehen geruzarako filamentu-sekuentzia pertsonalizatua ere errespetatzen du, ezarrita badago. Ordena ziklikoaren onura (erreminta-aldaketa gehigarriek geruza bakoitzari hozteko denbora gehiago ematen diote) ez da lehen geruzari aplikatzen, itsaspenagatik astiro eta bero inprimatzen baita.\n"
+"Gaitu hau soilik geruza guztietan, lehena barne, erreminta-sekuentzia zehatz-mehatz bera behar baduzu, itsaspen-optimizazio hori galtzearen truke."
+
 msgid "Slice gap closing radius"
 msgstr "Xerraketan tartea ixteko erradioa"
 
@@ -16484,9 +16705,6 @@ msgstr "Tartea ixteko erradioaren bikoitza baino txikiagoak diren pitzadurak bet
 msgid "Slicing Mode"
 msgstr "Xerratze-modua"
 
-msgid "Other"
-msgstr "Bestelakoak"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Erabili \"Bikoiti-bakoiti\" 3DLabPrint hegazkin-modeloetarako. Erabili \"Itxi zuloak\" modeloko zulo guztiak ixteko."
 
@@ -17469,6 +17687,14 @@ msgstr "Egiaztapenik ez"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Ez exekutatu baliozkotasun-egiaztapenik, hala nola G-code bideen gatazken egiaztapena."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Modu zorrotza"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Zerorik bestelako kode batekin irteten da xerratzeak larria ez den abisu bat sortzen duenean, bestela erregistroan soilik jasoko litzatekeena; adibidez, euskarria behar duen modelo bat euskarria desgaituta dagoenean. Erabili hau inoiz ezkutuko akatsik duen xerratzerik eman behar ez duten CI edo script bidezko prozesuetan. Horrelako abisu bakoitza result.json fitxategiko `warnings` array-an ere zerrendatzen da klase egonkor batekin; fitxategi hori Linuxen soilik idazten da. Ezin da --no-check aukerarekin konbinatu, horrek euskarrien egiaztapena saltatzen baitu."
+
 msgid "Normative check"
 msgstr "Arauzko egiaztapena"
 
@@ -17481,11 +17707,28 @@ msgstr "Irteerako modeloaren informazioa"
 msgid "This outputs the model’s information."
 msgstr "Atera modeloaren informazioa ateratzen du honek."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Aztertu sarea (JSON stdout-era)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Kargatutako objektu bakoitzaren JSON laburpena stdout-era idazten du eta gero irten egiten da: bere muga-kutxak eta jarri daitekeen oskol ganbileko aurpegiak, haien normalak, azalerak eta erdiguneak barne. --ground-* aukerek aurpegi horien artean egiten dute hautua. --info aukeraren ordezko makina-irakurgarria."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Aztertu margoketa (JSON stdout-era)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Kargatutako modeloan jada gordeta dagoen margotutako geruza bakoitzaren (euskarriak, jostura, MMU kolorea, gainazal zimurra) JSON laburpen egituratua idazten du — egoera bakoitzeko aurpegi kopurua, gainazal-azalera eta sarearekiko muga-kutxa — eta gero irten egiten da. Interfazean margoketa-tresnak irekitzearen ordezko makina-irakurgarria."
+
 msgid "Export Settings"
 msgstr "Esportatu ezarpenak"
 
-msgid "This exports settings to a file."
-msgstr "Honek ezarpenak fitxategi batera esportatzen ditu."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Honek ezarpenak fitxategi batera esportatzen ditu. Erabili - stdout-era idazteko."
 
 msgid "Send progress to pipe"
 msgstr "Bidali aurrerapena pipe-ra"
@@ -17541,6 +17784,30 @@ msgstr "Biratu Y inguruan"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Y ardatzaren inguruko biraketa-angelua, gradutan."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Jarri aurpegirik handienaren gainean"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Objektu bakoitza bere oskol ganbileko aurpegirik handienaren gainean jartzen du eta ohera erortzen uzten du. Tamaina bereko aurpegien artean, jada beherantz begira dagoena mantentzen da. Bermatzeko behar bezain aurpegi handirik ez duten objektuak dauden bezala uzten dira. Eraldaketak komando-lerroaren ordenan exekutatzen dira; beraz, aukera honen aurretik emandako biraketak errespetatzen dira. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Jarri aurpegiaren gainean normalaren arabera"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Objektu bakoitza kanporako normala NX,NY,NZ norabidetik hurbilen duen oskol ganbileko aurpegiaren gainean jartzen du eta ohera erortzen uzten du. Norabidea objektuaren koordenatuetan adierazten da; horiek aukera honen aurretik emandako biraketak barne hartzen dituzte eta plataformaren ardatzekin bat datoz, sarrerako fitxategiak objektua biratzen ez badu behintzat. Adibidez, 1,0,0 balioak objektua bere +X aldearen gainean jartzen du zutik. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Jarri puntu bateko aurpegiaren gainean"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Objektu bakoitza X,Y,Z puntua duen oskol ganbileko aurpegiaren gainean jartzen du eta ohera erortzen uzten du. Puntua objektuaren koordenatuetan adierazten da; horiek aukera honen aurretik emandako biraketak barne hartzen dituzte, eta --inspect-mesh aukerak koordenatu horietan ematen ditu aurpegien erdiguneak. Horrelako aurpegirik ez duten objektuak dauden bezala uzten dira, eta exekuzioak huts egiten du objektu bakar batek ere ez badu horrelakorik. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du."
+
 msgid "Scale the model by a float factor."
 msgstr "Eskalatu modeloa koma mugikorreko faktore baten bidez."
 
@@ -20596,6 +20863,18 @@ msgstr "Ekintza hau ezin da desegin. Jarraitu?"
 msgid "Skipping objects."
 msgstr "Objektuak saltatzen."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Material-proportzioa"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modeloaren altuera"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proportzioa"
+
 msgid "Select Filament"
 msgstr "Hautatu filamentua"
 
@@ -20837,11 +21116,15 @@ msgstr "Lehortzen-Berotzen"
 msgid "Drying-Dehumidifying"
 msgstr "Lehortzen-Hezetasuna kentzen"
 
-msgid " maximum drying temperature is "
-msgstr " lehortze-tenperatura maximoa da "
+# AI Translated
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s: gehieneko lehortze-tenperatura %d°C da."
 
-msgid " minimum drying temperature is "
-msgstr " lehortze-tenperatura minimoa da "
+# AI Translated
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s: gutxieneko lehortze-tenperatura %d°C da."
 
 msgid "This filament may not be completely dried."
 msgstr "Baliteke filamentu hau erabat lehortuta ez egotea."
@@ -21254,6 +21537,92 @@ msgstr ""
 "Saihestu okertzea\n"
 "Ba al zenekien ABS bezalako okertzeko joera duten materialak inprimatzean ohe beroaren tenperatura egoki igotzeak okertzeko probabilitatea murriztu dezakeela?"
 
+#~ msgid "Other"
+#~ msgstr "Bestelakoak"
+
+#~ msgid "Left: "
+#~ msgstr "Ezkerra: "
+
+#~ msgid "Right: "
+#~ msgstr "Eskuina: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Gehieneko tenperaturak ezin du hau gainditu: "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Gutxieneko tenperaturak ezin du hau baino txikiagoa izan: "
+
+#~ msgid "up to"
+#~ msgstr "honaino"
+
+#~ msgid "above"
+#~ msgstr "honen gainean"
+
+#~ msgid "from"
+#~ msgstr "hemendik"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Konfigurazio-paketea: "
+
+#~ msgid " updated to "
+#~ msgstr " hona eguneratu da: "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Taldekatze-errorea: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " ezin da hemen kokatu: "
+
+#~ msgid " maximum drying temperature is "
+#~ msgstr " lehortze-tenperatura maximoa da "
+
+#~ msgid " minimum drying temperature is "
+#~ msgstr " lehortze-tenperatura minimoa da "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "honakoa behar du:"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "ez dago gaituta"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materiala ez dago argitaratuta"
+
+#~ msgid "Select the language"
+#~ msgstr "Hautatu hizkuntza"
+
+#~ msgid "Select plugin"
+#~ msgstr "Hautatu plugina"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Goiko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
+#~ "Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n"
+#~ "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
+#~ "Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n"
+#~ "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Gaituta badago, purgatze-dorrea ez da inprimatuko tresna-aldaketarik ez duten geruzetan. Tresna-aldaketa duten geruzetan, estrusorea beherantz mugituko da purgatze-dorrea inprimatzeko. Erabiltzailearen ardura da inprimaketarekin talkarik ez dagoela ziurtatzea."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Honek ezarpenak fitxategi batera esportatzen ditu."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Waylanden jatorrizko zuzeneko ikuspegiak GStreamer GTK bideo-hustubidea behar du. Instalatu GStreamerrerako gtksink plugina eta berrabiarazi OrcaSlicer."
 
diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po
index e56aee63a7..3d410daf6e 100644
--- a/localization/i18n/fr/OrcaSlicer_fr.po
+++ b/localization/i18n/fr/OrcaSlicer_fr.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -2414,15 +2414,6 @@ msgstr "Une mise à jour est disponible. Ouvrez la boîte de dialogue du paquet
 msgid "%s has been removed."
 msgstr "%s a été supprimé."
 
-msgid "Switching application language"
-msgstr "Changer la langue de l'application"
-
-msgid "Select the language"
-msgstr "Sélectionner la langue"
-
-msgid "Language"
-msgstr "Langue"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "Le passage d’Orca Slicer à la langue %s a échoué."
@@ -3637,11 +3628,15 @@ msgstr "Rétracter le filament actuel au Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Changer de voie au Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "La température maximale ne peut pas dépasser "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "La température maximale ne peut pas dépasser %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "La température minimale ne doit pas être inférieure à "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "La température minimale ne doit pas être inférieure à %d"
 
 msgid "Type to filter..."
 msgstr "Saisissez du texte pour filtrer…"
@@ -4509,6 +4504,15 @@ msgstr ""
 "La copie du G-code temporaire vers le G-code de sortie a échoué. La carte SD est peut-être bloquée en écriture ?\n"
 "Message d’erreur : %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"La copie du G-code temporaire vers le G-code de sortie a échoué.\n"
+"Message d'erreur : %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "La copie du G-code temporaire vers le G-code de sortie a échoué. Il se peut qu’il y ait un problème avec le dispositif cible, veuillez essayer d’exporter à nouveau ou d’utiliser un autre périphérique. Le G-code de sortie corrompu se trouve dans %1%.tmp."
@@ -4809,6 +4813,9 @@ msgstr ""
 "Oui - Modifiez ces paramètres et activez automatiquement le mode spirale/vase\n"
 "Non - Annuler l'activation du mode spirale"
 
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Impression"
 
@@ -5239,14 +5246,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "La valeur %s est hors plage. La plage valide est comprise entre %d et %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Est-ce %s%% ou %s %s ?\n"
-"OUI pour %s%%, \n"
-"NON pour %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Est-ce %s%% ou %s %s ?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5268,29 +5272,22 @@ msgstr "Motif invalide. Utilisez N, N#K, ou une liste séparée par des virgules
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Format invalide. Format vectoriel attendu : \"%1%\""
 
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "Agents système"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Aucun plugin sélectionné"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Ajouter un plugin"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Sélectionner un plugin"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Supprimer le plugin"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Aucun plugin sélectionné"
+
 # AI Translated
 msgid "Configure"
 msgstr "Configurer"
@@ -5546,14 +5543,20 @@ msgstr "Définir comme optimal"
 msgid "Regroup filament"
 msgstr "Regrouper les filaments"
 
-msgid "up to"
-msgstr "jusqu’à"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "jusqu’à %1% mm"
 
-msgid "above"
-msgstr "plus que"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "au-dessus de %1% mm"
 
-msgid "from"
-msgstr "de"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "de %1% à %2% mm"
 
 msgid "Usage"
 msgstr "Utilisation"
@@ -5911,7 +5914,7 @@ msgstr "Volume :"
 msgid "Size:"
 msgstr "Taille :"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Des conflits de chemins G-code ont été trouvés au niveau de la couche %d, z = %.2lfmm. Veuillez séparer davantage les objets en conflit (%s <-> %s)."
 
@@ -6223,6 +6226,14 @@ msgstr "Enregistrer le projet sous"
 msgid "Save current project as"
 msgstr "Enregistrer le projet actuel sous"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publier 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exporter un fichier 3MF avec les réglages sélectionnés intégrés"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importer des fichiers 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7484,6 +7495,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inférieur"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Ce réglage ne précise pas de type de capacité de plugin."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Ce réglage précise un type de capacité de plugin non reconnu : "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Sélection des plugins"
@@ -8044,6 +8063,14 @@ msgstr "Veuillez vous assurer que les G-codes de ces préréglages sont sûrs af
 msgid "Customized Preset"
 msgstr "Préréglage personnalisé"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Certains réglages publiés n'ont pas pu être appliqués :"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Certains emplacements de filament ont été modifiés :"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Le nom des composants dans le fichier STEP n'est pas au format UTF-8 !"
 
@@ -8445,6 +8472,21 @@ msgstr "Enregistrer le fichier découpé sous :"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Le fichier %s a été envoyé vers l'espace de stockage de l'imprimante et peut être visualisé sur l'imprimante."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publier le fichier 3MF sous :"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Échec de l'exportation du fichier 3MF publié.\n"
+"Veuillez vérifier si le dossier existe en ligne ou si d'autres programmes ont le fichier ouvert."
+
+msgid "Publish"
+msgstr "Publier"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Le type de buse n'est pas défini. Veuillez définir la buse et réessayer."
 
@@ -8655,9 +8697,6 @@ msgstr "Voulez-vous continuer ?"
 msgid "Language selection"
 msgstr "Sélection de la langue"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Changement de langue de l’application alors que certains préréglages sont modifiés."
-
 msgid "Asia-Pacific"
 msgstr "Asie-Pacifique"
 
@@ -8762,6 +8801,9 @@ msgstr "Chemin d’accès à l’instance courante : "
 msgid "General"
 msgstr "Général"
 
+msgid "Language"
+msgstr "Langue"
+
 msgid "Metric"
 msgstr "Métrique"
 
@@ -9192,9 +9234,6 @@ msgstr "Lors du défilement du curseur de couche dans l'aperçu découpé, affic
 msgid "Dimmed layer brightness"
 msgstr "Luminosité des couches assombries"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9576,9 +9615,6 @@ msgstr "Accéder à la page internet de publication des modèles"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Remarque : La préparation peut prendre plusieurs minutes. Veuillez patienter."
 
-msgid "Publish"
-msgstr "Publier"
-
 msgid "Publish was canceled"
 msgstr "La publication a été annulée"
 
@@ -9594,6 +9630,81 @@ msgstr "Téléversement des données"
 msgid "Jump to webpage"
 msgstr "Ouvrir la page internet"
 
+# AI Translated
+msgid "Material"
+msgstr "Matériau"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filament mixte"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Certains filaments mixtes dépendent de filaments qui ne seront pas publiés :"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (mixte)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% nécessite %2%, qui n'est pas activé."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% nécessite %2%, dont le matériau ne sera pas publié."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Pour publier un filament mixte, activez chacun des filaments qu'il utilise et choisissez Publication complète ou satisfaites son exigence de Type."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Publier quand même"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publier 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Sélectionnez les réglages à publier dans le fichier 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki de Publier 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Guide vidéo de Publier 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filament mixte - publié dans son ensemble lorsque « Activer » est coché ci-dessus"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publier ce filament mixte, puis activer + publier entièrement ses filaments composants"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publier cet emplacement de filament dans le fichier 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Publication complète"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Intégrer l'ensemble du filament de cet emplacement dans le fichier 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrer les éléments non sélectionnés"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Enregistrer %s sous"
@@ -9611,6 +9722,10 @@ msgstr "Copie dans ce préréglage toutes les valeurs héritées du préréglage
 msgid "Detach from parent"
 msgstr "Détacher du parent"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Enregistrer sans parent"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Préréglage unique"
@@ -10312,9 +10427,17 @@ msgstr "Une tour d'amorçage est requise pour la détection d'agglomération. Il
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "L'activation simultanée de la hauteur Z précise et de la tour d'amorçage peut provoquer des erreurs de tranchage. Voulez-vous quand même activer la hauteur Z précise ?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Le timelapse fluide nécessite une tour d’amorçage à chaque couche, ce qui est incompatible avec « Pas de couches éparses ». « Pas de couches éparses » a été désactivé."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Une tour d’amorçage est requise pour le mode timelapse fluide. Le modèle peut présenter des défauts sans tour d’amorçage. Voulez-vous activer la tour d’amorçage ?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "« Pas de couches éparses » est incompatible avec le timelapse fluide, qui nécessite une tour d’amorçage à chaque couche. Le timelapse est repassé en mode traditionnel."
+
 msgid "Still print by object?"
 msgstr "Vous imprimez toujours par objet ?"
 
@@ -10683,9 +10806,6 @@ msgstr "Profils de traitement compatibles"
 msgid "Printable space"
 msgstr "Espace imprimable"
 
-msgid "Printer Agent"
-msgstr "Agent d'imprimante"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Sélectionner l'implémentation de l'agent réseau pour la communication avec l'imprimante. Les agents disponibles sont enregistrés au démarrage."
 
@@ -11084,12 +11204,6 @@ msgstr "Nombre d'extrudeurs"
 msgid "Capabilities"
 msgstr "Fonctionnalités"
 
-msgid "Left: "
-msgstr "Gauche : "
-
-msgid "Right: "
-msgstr "Droite : "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Afficher tous les préréglages (y compris incompatibles)"
 
@@ -11923,15 +12037,22 @@ msgstr "Réparation annulée"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Échec de la copie du fichier %1% vers %2% : %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Téléchargement des nouveaux profils de fabricant : "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Paquet de configuration : %1% mis à jour en %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Échec du téléchargement des profils de fabricant : "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Besoin de vérifier les modifications non enregistrées avant les mises à jour de configuration."
 
-msgid "Configuration package: "
-msgstr "Paquet de configuration : "
-
-msgid " updated to "
-msgstr " mis à jour en "
-
 msgid "Open G-code file:"
 msgstr "Ouvrir un fichier G-code :"
 
@@ -11991,11 +12112,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "La mise en forme du signal n’est prise en charge que par Klipper, RepRapFirmware et Marlin 2"
 
-msgid "Grouping error: "
-msgstr "Erreur de regroupement : "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Erreur de regroupement : %1% ne peut pas être placé dans la buse gauche"
 
-msgid " can not be placed in the "
-msgstr " ne peut pas être placé dans le/la "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Erreur de regroupement : %1% ne peut pas être placé dans la buse droite"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12109,6 +12234,10 @@ msgstr "%1% est trop proche des autres, cela pourrait provoquer des collisions."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% est trop grand, cela pourrait provoquer des collisions."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "La position relative du modèle et de la tour d’amorçage ne répond pas aux exigences de la fonction « Pas de couches éparses ». Veuillez ajuster leurs positions relatives, réduire la hauteur du modèle ou désactiver « Pas de couches éparses »."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " est trop proche d'une zone d'exclusion, il peut y avoir des collisions lors de l'impression."
 
@@ -12452,6 +12581,9 @@ msgstr "Utiliser le 3MF au lieu du G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Activez ceci si l’imprimante accepte un fichier 3MF comme tâche d’impression. Lorsque cette option est activée, Orca Slicer envoie le fichier découpé au format .gcode.3mf au lieu d’un simple fichier .gcode."
 
+msgid "Printer Agent"
+msgstr "Agent d'imprimante"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Sélectionner l'implémentation de l'agent réseau pour la communication avec l'imprimante."
 
@@ -13497,6 +13629,10 @@ msgstr "Rectiligne Aligné"
 msgid "Concentric"
 msgstr "Concentrique"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spirale décalée"
+
 msgid "Hilbert Curve"
 msgstr "Courbe de Hilbert"
 
@@ -13588,13 +13724,13 @@ msgstr "Ordre de remplissage de la surface supérieure"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direction dans laquelle les surfaces supérieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n"
-"Vers l'extérieur commence au centre de la surface, de sorte que tout excès de matière est poussé vers le bord où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées au centre.\n"
-"Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens."
+"Sens dans lequel les surfaces supérieures sont remplies avec un motif partant du centre (Concentrique, Spirale décalée, Spirale d'Archimède, Spirale Octagramme).\n"
+"Vers l'extérieur commence au centre de la surface, ce qui repousse l'excédent de matière vers le bord, là où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées du centre.\n"
+"Défaut utilise l'ordre du chemin le plus court, qui peut aller dans un sens comme dans l'autre."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13602,13 +13738,13 @@ msgstr "Ordre de remplissage de la surface inférieure"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direction dans laquelle les surfaces inférieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n"
-"Vers l'intérieur commence chaque surface par les courbes extérieures plus larges, ce qui améliore l'adhérence de la première couche sur les plateaux où les courbes serrées au centre peuvent ne pas adhérer. Vers l'extérieur commence au centre, poussant tout excès de matière vers le bord.\n"
-"Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens."
+"Sens dans lequel les surfaces inférieures sont remplies avec un motif partant du centre (Concentrique, Spirale décalée, Spirale d'Archimède, Spirale Octagramme).\n"
+"Vers l'intérieur commence chaque surface par les courbes extérieures les plus larges, ce qui améliore l'adhérence de la couche initiale sur les plateaux où les courbes serrées du centre risquent de ne pas accrocher. Vers l'extérieur commence au centre et repousse l'excédent de matière vers le bord.\n"
+"Défaut utilise l'ordre du chemin le plus court, qui peut aller dans un sens comme dans l'autre."
 
 msgid "Internal solid infill pattern"
 msgstr "Motif de remplissage plein interne"
@@ -13707,6 +13843,14 @@ msgstr "Sens inverse des aiguilles d’une montre"
 msgid "Clockwise"
 msgstr "Dans le sens des aiguilles d’une montre"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Distance à la tige"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Distance horizontale entre la pointe de la buse et le bord le plus éloigné de la tige. Utilisée pour éviter les collisions lors de l'impression par objet."
+
 msgid "Height to rod"
 msgstr "Hauteur jusqu’à la tige"
 
@@ -15859,6 +16003,20 @@ msgstr "Détecter les parois en surplomb"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Détectez le pourcentage de surplomb par rapport à la largeur de la ligne et utilisez une vitesse différente pour imprimer. Pour un surplomb de 100%% la vitesse du pont est utilisée."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Imprimer les parois sans support en dernier"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Les boucles de paroi entièrement en l'air ne sont imprimées qu'une fois que quelque chose peut les soutenir :\n"
+"elles sont extrudées après les autres parois de leur îlot, la plus intérieure d'abord, quel que soit l'ordre des parois.\n"
+"Une boucle que seuls les ponts de cette couche peuvent ancrer attend que ces ponts soient imprimés, tandis qu'une boucle longeant une paroi soutenue garde sa place avant le remplissage, qui en a besoin comme ancrage."
+
 msgid "Outer walls"
 msgstr "Parois extérieures"
 
@@ -16295,6 +16453,39 @@ msgstr "Essuyer sur les boucles"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Pour minimiser la visibilité de la couture dans une extrusion en boucle fermée, un petit mouvement vers l’intérieur est exécuté avant que la buse ne quitte la boucle."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Essuyage vers l'intérieur"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"S'applique uniquement aux parois extérieures, contours des trous compris. Déplace la buse chaude vers les parois intérieures déjà imprimées pendant l'essuyage, afin de limiter le réchauffement du plastique fraîchement déposé et les marques de couture.\n"
+"\n"
+"Particulièrement utile pour des hauteurs de couche inférieures à 0,1 mm, où les marques d'essuyage sont plus visibles.\n"
+"\n"
+"Utilise l'essuyage normal si aucune paroi intérieure adjacente n'est déjà imprimée (zones à paroi unique ou ordre des parois Extérieur/Intérieur), ou si aucun chemin vers l'intérieur soutenu n'est trouvé, par exemple dans les angles serrés ou aux interruptions de couture."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Distance d'essuyage vers l'intérieur"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Distance dont le chemin d'essuyage est décalé par rapport au périmètre extérieur, exprimée en millimètres ou en pourcentage de la largeur d'extrusion réelle de la paroi extérieure.\n"
+"\n"
+"Par exemple, 50% décale le chemin de la moitié de la largeur de la paroi extérieure. Le décalage effectif est limité à la fois par la largeur réelle de la paroi extérieure et par l'espace disponible jusqu'à la paroi adjacente : les valeurs supérieures à 100% ou une distance absolue équivalente n'ont donc aucun effet supplémentaire. Mettez 0 pour désactiver le décalage."
+
 msgid "Wipe before external loop"
 msgstr "Essuyer avant la boucle externe"
 
@@ -16556,8 +16747,9 @@ msgstr "Prend le nouvel outil sans attendre qu’il atteigne la température d
 msgid "No sparse layers (beta)"
 msgstr "Pas de couches éparses (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Si cette option est activée, la tour d’essuyage ne sera pas imprimée sur les couches sans changement d’outil. Sur les couches avec changement d’outil, l’extrudeur se déplacera vers le bas pour imprimer la tour d’essuyage. L’utilisateur est responsable de s’assurer qu’il n’y a pas de collision avec l’impression."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Si cette option est activée, la tour d'essuyage n'est pas imprimée sur les couches sans changement d'outil. Sur les couches comportant un changement d'outil, l'extrudeur descend pour imprimer la tour d'essuyage : la tour se retrouve donc sous le modèle et la tête d'outil doit descendre jusqu'à elle. Les dispositions où cela entrerait en collision avec un objet déjà imprimé sont rejetées. Sans effet avec le timelapse fluide ou la détection d'agglomération de la buse, qui nécessitent une tour à chaque couche."
 
 msgid "Prime all printing extruders"
 msgstr "Amorcer tous les extrudeurs d’impression"
@@ -16583,6 +16775,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cyclique"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ordre cyclique"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Séquence de filaments personnalisée utilisée par l'ordre cyclique des changements d'outil, sous forme de numéros de filament séparés par des virgules (par ex. « 3,2,1,4 »).\n"
+"Chaque couche imprime ses filaments en suivant cette séquence ; les filaments non listés sont imprimés en dernier, par ordre croissant.\n"
+"Laissez vide pour parcourir les filaments par ordre croissant."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Appliquer l'ordre cyclique à la couche initiale"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Applique également l'ordre cyclique des changements d'outil à la couche initiale.\n"
+"Cette option est désactivée par défaut, car la couche initiale est au contraire ordonnée pour la meilleure adhérence au plateau : les filaments qui impriment de petits détails fragiles de la couche initiale sont imprimés en dernier, si bien que les changements d'outil et déplacements suivants risquent moins de décoller ces parties faiblement ancrées. Cet ordre de la couche initiale respecte aussi une séquence de filaments personnalisée pour la couche initiale lorsqu'elle est définie. L'avantage de l'ordre cyclique (les changements d'outil supplémentaires laissent à chaque couche plus de temps pour refroidir) ne s'applique pas à la couche initiale, imprimée lentement et à chaud pour l'adhérence.\n"
+"N'activez cette option que si vous avez besoin exactement de la même séquence d'outils sur chaque couche, y compris la première, au prix de cette optimisation de l'adhérence."
+
 msgid "Slice gap closing radius"
 msgstr "Rayon de fermeture de l’écart des tranches"
 
@@ -16592,9 +16812,6 @@ msgstr "Les fissures plus petites que 2x le rayon de fermeture de l’espace son
 msgid "Slicing Mode"
 msgstr "Mode de découpe"
 
-msgid "Other"
-msgstr "Autre"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « Fermer les trous » pour fermer tous les trous du modèle."
 
@@ -17581,6 +17798,14 @@ msgstr "Pas de vérification"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Ne pas effectuer de contrôle de validité, tel que le contrôle des conflits de parcours de G-code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Mode strict"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Termine avec un code de retour non nul lorsque le découpage émet un avertissement non critique qui ne serait autrement que consigné, par exemple un modèle nécessitant des supports alors que les supports sont désactivés. À utiliser en intégration continue ou dans des chaînes de traitement automatisées qui ne doivent jamais livrer un découpage subtilement défectueux. Chacun de ces avertissements est également listé avec une classe stable dans le tableau `warnings` de result.json, écrit uniquement sous Linux. Ne peut pas être combiné avec --no-check, qui saute la vérification des supports."
+
 msgid "Normative check"
 msgstr "Contrôle normatif"
 
@@ -17593,11 +17818,28 @@ msgstr "Information du Modèle de Sortie"
 msgid "This outputs the model’s information."
 msgstr "Sortie des informations du modèle."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Inspecter le maillage (JSON sur stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Affiche sur stdout un résumé JSON de chaque objet chargé, puis quitte : ses boîtes englobantes et les faces de son enveloppe convexe sur lesquelles il peut reposer, avec leurs normales, aires et centres. Ce sont les faces parmi lesquelles choisissent les options --ground-*. Alternative exploitable par une machine à --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Inspecter la peinture (JSON sur stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Affiche un résumé JSON structuré de chaque couche peinte (supports, couture, couleur MMU, surface irrégulière) déjà enregistrée sur le modèle chargé — nombre de facettes, aire de surface et boîte englobante locale au maillage pour chaque état — puis quitte. Alternative exploitable par une machine à l'ouverture des gizmos de peinture dans l'interface."
+
 msgid "Export Settings"
 msgstr "Paramètres d'exportation"
 
-msgid "This exports settings to a file."
-msgstr "Exporter les paramètres vers un fichier."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Exporte les réglages vers un fichier. Utilisez - pour les écrire sur stdout."
 
 msgid "Send progress to pipe"
 msgstr "Envoyer la progression à la queue"
@@ -17653,6 +17895,30 @@ msgstr "Rotation autour de l’axe Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Angle de rotation autour de l’axe Y en degrés."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Poser sur la plus grande face"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Pose chaque objet sur la plus grande face de son enveloppe convexe et le fait tomber sur le plateau. Parmi des faces de même taille, celle déjà tournée vers le bas est conservée. Les objets dépourvus d'une face assez grande pour reposer dessus sont laissés tels quels. Les transformations s'appliquent dans l'ordre de la ligne de commande : les rotations indiquées avant cette option sont donc respectées. --orient 1 s'exécute après toutes les transformations et remplace l'orientation."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Poser sur la face selon la normale"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Pose chaque objet sur la face de son enveloppe convexe dont la normale extérieure est la plus proche de la direction NX,NY,NZ et le fait tomber sur le plateau. La direction est exprimée dans les coordonnées de l'objet, qui incluent les rotations indiquées avant cette option et correspondent aux axes du plateau, sauf si le fichier d'entrée fait pivoter l'objet. Par exemple, 1,0,0 pose l'objet sur sa face +X. --orient 1 s'exécute après toutes les transformations et remplace l'orientation."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Poser sur la face en un point"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Pose chaque objet sur la face de son enveloppe convexe qui contient le point X,Y,Z et le fait tomber sur le plateau. Le point est exprimé dans les coordonnées de l'objet, qui incluent les rotations indiquées avant cette option ; --inspect-mesh donne les centres des faces dans ces coordonnées. Les objets dépourvus d'une telle face sont laissés tels quels, et l'exécution échoue si aucun objet n'en possède. --orient 1 s'exécute après toutes les transformations et remplace l'orientation."
+
 msgid "Scale the model by a float factor."
 msgstr "Mettre à l'échelle le modèle par un facteur flottant"
 
@@ -20708,6 +20974,18 @@ msgstr "Cette action ne peut pas être annulée. Continuer ?"
 msgid "Skipping objects."
 msgstr "Ignorer des objets."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Proportion de matériau"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Hauteur du modèle"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proportion"
+
 msgid "Select Filament"
 msgstr "Sélectionner le filament"
 
@@ -20962,12 +21240,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Séchage - Déshumidification"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " la température de séchage maximale est de "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "La température de séchage maximale de %s est de %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " la température de séchage minimale est de "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "La température de séchage minimale de %s est de %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21412,6 +21692,95 @@ msgstr ""
 "Éviter la déformation\n"
 "Saviez-vous que lors de l’impression de matériaux susceptibles de se déformer, tels que l’ABS, une augmentation appropriée de la température du plateau chauffant peut réduire la probabilité de déformation?"
 
+#~ msgid "Other"
+#~ msgstr "Autre"
+
+#~ msgid "Left: "
+#~ msgstr "Gauche : "
+
+#~ msgid "Right: "
+#~ msgstr "Droite : "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "La température maximale ne peut pas dépasser "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "La température minimale ne doit pas être inférieure à "
+
+#~ msgid "up to"
+#~ msgstr "jusqu’à"
+
+#~ msgid "above"
+#~ msgstr "plus que"
+
+#~ msgid "from"
+#~ msgstr "de"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Paquet de configuration : "
+
+#~ msgid " updated to "
+#~ msgstr " mis à jour en "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Erreur de regroupement : "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " ne peut pas être placé dans le/la "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " la température de séchage maximale est de "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " la température de séchage minimale est de "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "nécessite"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "non activé"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "matériau non publié"
+
+#~ msgid "Select the language"
+#~ msgstr "Sélectionner la langue"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Sélectionner un plugin"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direction dans laquelle les surfaces supérieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n"
+#~ "Vers l'extérieur commence au centre de la surface, de sorte que tout excès de matière est poussé vers le bord où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées au centre.\n"
+#~ "Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direction dans laquelle les surfaces inférieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n"
+#~ "Vers l'intérieur commence chaque surface par les courbes extérieures plus larges, ce qui améliore l'adhérence de la première couche sur les plateaux où les courbes serrées au centre peuvent ne pas adhérer. Vers l'extérieur commence au centre, poussant tout excès de matière vers le bord.\n"
+#~ "Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Si cette option est activée, la tour d’essuyage ne sera pas imprimée sur les couches sans changement d’outil. Sur les couches avec changement d’outil, l’extrudeur se déplacera vers le bas pour imprimer la tour d’essuyage. L’utilisateur est responsable de s’assurer qu’il n’y a pas de collision avec l’impression."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exporter les paramètres vers un fichier."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "L’aperçu en direct natif sous Wayland nécessite le récepteur vidéo GStreamer GTK. Veuillez installer le plugin gtksink pour GStreamer, puis redémarrer OrcaSlicer."
 
diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po
index a15d471073..bc65ceef4b 100644
--- a/localization/i18n/hu/OrcaSlicer_hu.po
+++ b/localization/i18n/hu/OrcaSlicer_hu.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2460,15 +2460,6 @@ msgstr "Frissítés érhető el. Nyisd meg a beállításcsomag párbeszédablak
 msgid "%s has been removed."
 msgstr "%s eltávolítva."
 
-msgid "Switching application language"
-msgstr "Alkalmazás nyelvének váltása"
-
-msgid "Select the language"
-msgstr "Válaszd ki a nyelvet"
-
-msgid "Language"
-msgstr "Nyelv"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3712,11 +3703,15 @@ msgstr "Az aktuális filament visszahúzása a Filament Track Switch-nél"
 msgid "Switch track at Filament Track Switch"
 msgstr "Sáv váltása a Filament Track Switch-nél"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "A maximális hőmérséklet nem haladhatja meg ezt: "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "A maximális hőmérséklet nem haladhatja meg ezt: %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4603,6 +4598,15 @@ msgstr ""
 "Nem sikerült az ideiglenes G-kódot a kimeneti G-kódba másolni. Lehet, hogy az SD-kártya írásvédett?\n"
 "Hibaüzenet: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült.\n"
+"Hibaüzenet: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Nem sikerült az ideiglenes G-kódot a kimeneti G-kódba másolni. Probléma lehet a céleszközzel. Kérlek, exportáld újra, vagy használj másik eszközt. A sérült kimeneti G-kód helye: %1%.tmp."
@@ -4905,6 +4909,10 @@ msgstr ""
 "Igen - Módosítsd ezeket a beállításokat, és automatikusan kapcsold be a spirál módot\n"
 "Nem  - Most ne kapcsold be a spirál módot"
 
+# AI Translated
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Nyomtatás"
 
@@ -5335,14 +5343,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "%s érték tartományon kívül van. Az érvényes tartomány: %d - %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%% vagy %s %s?\n"
-"IGEN %s%%, \n"
-"NEM %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%% vagy %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5364,30 +5369,22 @@ msgstr "Érvénytelen minta. Használj N, N#K formátumot, vagy vesszővel elvá
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Érvénytelen formátum. Elvárt vektor formátum: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "Rendszerügynökök"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Nincs kiválasztott bővítmény"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Bővítmény hozzáadása"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Bővítmény kiválasztása"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Bővítmény eltávolítása"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Nincs kiválasztott bővítmény"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfigurálás"
@@ -5643,14 +5640,20 @@ msgstr "Beállítás optimálisra"
 msgid "Regroup filament"
 msgstr "Filamentek újracsoportosítása"
 
-msgid "up to"
-msgstr "legfeljebb"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "legfeljebb %1% mm"
 
-msgid "above"
-msgstr "felett"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "%1% mm felett"
 
-msgid "from"
-msgstr "ettől"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "%1% mm-től %2% mm-ig"
 
 msgid "Usage"
 msgstr "Használat"
@@ -6011,7 +6014,7 @@ msgstr "Térfogat:"
 msgid "Size:"
 msgstr "Méret:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "G-kód útvonalütközés található a(z) %d. rétegen, Z = %.2lfmm. Helyezd távolabb egymástól az ütköző objektumokat (%s <-> %s)."
 
@@ -6325,6 +6328,14 @@ msgstr "Projekt mentése másként"
 msgid "Save current project as"
 msgstr "Jelenlegi projekt mentése másként"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MF közzététele"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "3MF fájl exportálása a kiválasztott beállítások beágyazásával"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importálás 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7598,6 +7609,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Alsó"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Ez a beállítás nem ad meg bővítményképesség-típust."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Ez a beállítás ismeretlen bővítményképesség-típust ad meg: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Bővítmény kiválasztása"
@@ -8159,6 +8178,14 @@ msgstr "Kérlek, győződj meg arról, hogy a beállításokban található G-k
 msgid "Customized Preset"
 msgstr "Egyedi beállítás"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Néhány közzétett beállítást nem sikerült alkalmazni:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Néhány filamenthely megváltozott:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "A STEP fájlon belüli komponens neve nem UTF-8 formátumban van!"
 
@@ -8571,6 +8598,21 @@ msgstr "Szeletelt fájl mentése mint:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "A(z) %s fájlt elküldtük a nyomtató tárhelyére. A fájl a nyomtatón tekinthető meg."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MF fájl közzététele mint:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"A közzétett 3MF fájl exportálása nem sikerült.\n"
+"Ellenőrizd, hogy a mappa elérhető-e online, illetve hogy más program nem tartja-e nyitva a fájlt."
+
+msgid "Publish"
+msgstr "Közzététel"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "A fúvókatípus nincs beállítva. Állítsd be a fúvókát, majd próbáld újra."
 
@@ -8783,9 +8825,6 @@ msgstr "Szeretnéd folytatni?"
 msgid "Language selection"
 msgstr "Nyelv kiválasztása"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Alkalmazás nyelvének átváltása, miközben egyes beállítások módosultak."
-
 msgid "Asia-Pacific"
 msgstr "Ázsia-Csendes-óceáni térség"
 
@@ -8890,6 +8929,9 @@ msgstr "Jelenlegi példány útvonala: "
 msgid "General"
 msgstr "Általános"
 
+msgid "Language"
+msgstr "Nyelv"
+
 msgid "Metric"
 msgstr "Metrikus"
 
@@ -9334,9 +9376,6 @@ msgstr "A rétegcsúszka mozgatásakor a szeletelt előnézetben az aktuális r
 msgid "Dimmed layer brightness"
 msgstr "Elhalványított rétegek fényereje"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9736,9 +9775,6 @@ msgstr "Ugrás a modell közzététele weboldalra"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Megjegyzés: Az előkészítés több percig is eltarthat. Kérlek, várj."
 
-msgid "Publish"
-msgstr "Közzététel"
-
 msgid "Publish was canceled"
 msgstr "A közzététel törlésre került"
 
@@ -9754,6 +9790,81 @@ msgstr "Adatok feltöltése"
 msgid "Jump to webpage"
 msgstr "Ugrás a weboldalra"
 
+# AI Translated
+msgid "Material"
+msgstr "Anyag"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Kevert filament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Néhány kevert filament olyan filamentektől függ, amelyek nem lesznek közzétéve:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "%d. filament (kevert)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% a következőt igényli: %2%, amely nincs engedélyezve."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% a következőt igényli: %2%, amelynek az anyaga nem lesz közzétéve."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Kevert filament közzétételéhez engedélyezd az összes általa használt filamentet, és válaszd a Teljes közzétételt, vagy teljesítsd a Típus követelményét."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Közzététel mindenképp"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MF közzététele..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Válaszd ki, mely beállítások kerüljenek közzétételre a 3MF fájlban"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF közzététele wiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF közzététele videós útmutató"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Kevert filament - egészében kerül közzétételre, ha fent az \"Engedélyezve\" be van jelölve"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Ennek a kevert filamentnek a közzététele, valamint az összetevő filamentjeinek engedélyezése + teljes közzététele"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Ennek a filamenthelynek a közzététele a 3MF fájlban"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Teljes közzététel"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Ennek a helynek a teljes filamentjét beágyazza a 3MF fájlba"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Nem kijelöltek szűrése"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "%s mentése"
@@ -9771,6 +9882,10 @@ msgstr "Az összes örökölt értéket átmásolja a szülő előbeállításb
 msgid "Detach from parent"
 msgstr "Leválasztás a szülőről"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Mentés szülő nélkül"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Önálló előbeállítás"
@@ -10477,9 +10592,17 @@ msgstr "A csomósodás-észleléshez szükség van a törlőtoronyra. Nélküle
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "A pontos Z magasság és a törlőtorony egyidejű engedélyezése szeletelési hibákat okozhat. Továbbra is engedélyezi a pontos Z magasságot?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "A sima Timelapse-hez minden rétegen törlőtorony kell, ami nem használható a \"Nincsenek ritka rétegek\" beállítással együtt. A \"Nincsenek ritka rétegek\" kikapcsolva."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "A sima Timelapse módhoz törlőtorony szükséges. Nélküle hibák jelenhetnek meg a nyomtatott tárgyon. Bekapcsolod a törlőtornyot?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "A \"Nincsenek ritka rétegek\" nem használható a sima Timelapse-szel, amelyhez minden rétegen törlőtorony kell. A Timelapse hagyományos módra váltott."
+
 msgid "Still print by object?"
 msgstr "Továbbra is tárgyanként szeretnél nyomtatni?"
 
@@ -10855,9 +10978,6 @@ msgstr "Kompatibilis folyamatprofilok"
 msgid "Printable space"
 msgstr "Nyomtatási terület"
 
-msgid "Printer Agent"
-msgstr "Nyomtatóügynök"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Válaszd ki a nyomtatóval való kommunikációhoz használt hálózati ügynököt. Az elérhető ügynököket indításkor regisztrálja a rendszer."
 
@@ -11262,14 +11382,6 @@ msgstr "Extruderek száma"
 msgid "Capabilities"
 msgstr "Képességek"
 
-# AI Translated
-msgid "Left: "
-msgstr "Bal: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Jobb: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Minden beállítás megjelenítése (beleértve az inkompatibiliseket is)"
 
@@ -12113,15 +12225,22 @@ msgstr "Javítás megszakítva"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "%1% fájl másolása sikertelen a következő helyre: %2% Hiba: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Új gyártói profilok letöltése: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Konfigurációs csomag: %1% frissítve erre: %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Nem sikerült letölteni a gyártói profilokat: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Kérlek, ellenőrizd a nem mentett módosításokat a konfiguráció frissítése előtt."
 
-msgid "Configuration package: "
-msgstr "Konfigurációs csomag: "
-
-msgid " updated to "
-msgstr " frissítve erre: "
-
 msgid "Open G-code file:"
 msgstr "G-kód fájl megnyitása:"
 
@@ -12181,11 +12300,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "A rezgéskompenzációt csak a Klipper, a RepRapFirmware és a Marlin 2 támogatja"
 
-msgid "Grouping error: "
-msgstr "Csoportosítási hiba: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Csoportosítási hiba: %1% nem helyezhető a bal fúvókába"
 
-msgid " can not be placed in the "
-msgstr " nem helyezhető ide: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Csoportosítási hiba: %1% nem helyezhető a jobb fúvókába"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12299,6 +12422,10 @@ msgstr "%1% túl közel van más tárgyakhoz, a nyomtatás során előfordulhatn
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% túl magas, a nyomtatás során előfordulhatnak ütközések."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "A modell és a törlőtorony egymáshoz viszonyított helyzete nem felel meg a \"Nincsenek ritka rétegek\" funkció követelményeinek. Módosítsd az egymáshoz viszonyított helyzetüket, csökkentsd a modell magasságát, vagy kapcsold ki a \"Nincsenek ritka rétegek\" beállítást."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " túl közel van a tiltott területhez, a nyomtatás során előfordulhatnak ütközések."
 
@@ -12659,6 +12786,9 @@ msgstr "3MF használata G-kód helyett"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Kapcsold be, ha a nyomtató 3MF fájlt fogad el nyomtatási feladatként. Bekapcsolva az Orca Slicer a szeletelt fájlt .gcode.3mf formátumban küldi el egyszerű .gcode fájl helyett."
 
+msgid "Printer Agent"
+msgstr "Nyomtatóügynök"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Válaszd ki a nyomtató kommunikációjához használt hálózati ügynök implementációját."
 
@@ -13720,6 +13850,10 @@ msgstr "Igazított vonal"
 msgid "Concentric"
 msgstr "Koncentrikus"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spirális behúzás"
+
 msgid "Hilbert Curve"
 msgstr "Hilbert-görbe"
 
@@ -13811,13 +13945,13 @@ msgstr "Felső felület kitöltési sorrendje"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Az az irány, amelyben a felső felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n"
-"A Kifelé a felület közepén kezd, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélén kezd, és a középen lévő szűk ívekkel fejeződik be.\n"
-"Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat."
+"Az az irány, amelyben a felső felületek kitöltése történik középpontból induló mintázat esetén (Koncentrikus, Spirális behúzás, Archimédeszi vonalak, Nyolcágú spirál).\n"
+"A Kifelé a felület közepén indul, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélen indul, és a középen lévő szűk ívekkel ér véget.\n"
+"Az Alapértelmezett a legrövidebb út szerinti sorrendet használja, amely bármelyik irányba haladhat."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13825,13 +13959,13 @@ msgstr "Alsó felület kitöltési sorrendje"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Az az irány, amelyben az alsó felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n"
-"A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja az első réteg tapadását azokon az asztalokon, ahol a középen lévő szűk ívek nem tapadnak meg jól. A Kifelé a közepén kezd, a felesleges anyagot a szélek felé tolva.\n"
-"Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat."
+"Az az irány, amelyben az alsó felületek kitöltése történik középpontból induló mintázat esetén (Koncentrikus, Spirális behúzás, Archimédeszi vonalak, Nyolcágú spirál).\n"
+"A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja a kezdőréteg tapadását azokon az asztalokon, amelyeken a középen lévő szűk ívek esetleg nem tapadnak meg. A Kifelé a közepén indul, és a felesleges anyagot a szélek felé tolja.\n"
+"Az Alapértelmezett a legrövidebb út szerinti sorrendet használja, amely bármelyik irányba haladhat."
 
 # AI Translated
 msgid "Internal solid infill pattern"
@@ -13935,6 +14069,14 @@ msgstr "Óramutató járásával ellentétes"
 msgid "Clockwise"
 msgstr "Óramutató járásával megegyező"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Távolság a rúdtól"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "A fúvóka hegyének vízszintes távolsága a rúd távolabbi élétől. Ütközés elkerülésére szolgál tárgyankénti nyomtatás esetén."
+
 msgid "Height to rod"
 msgstr "Magasság a rúdig"
 
@@ -16113,6 +16255,20 @@ msgstr "Túlnyúló falak felismerése"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Felismeri a túlnyúlás százalékos arányát a vonalszélességhez viszonyítva, és más sebességet használ. A 100%%-os túlnyúlás esetén az áthidaláshoz beállított sebességet használja."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Alátámasztatlan falak nyomtatása utoljára"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"A teljesen a levegőben lévő falhurkok csak akkor kerülnek nyomtatásra, amikor már van, ami megtartsa őket:\n"
+"a szigetük többi fala után kerülnek extrudálásra, a legbelsővel kezdve, függetlenül a falak sorrendjétől.\n"
+"Az a hurok, amelyet csak az adott réteg áthidalásai tudnak rögzíteni, megvárja, amíg ezek az áthidalások kinyomtatásra kerülnek, míg egy alátámasztott fal mellett futó hurok megtartja a helyét a kitöltés előtt, amelynek rögzítésként szüksége van rá."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Külső falak"
@@ -16553,6 +16709,39 @@ msgstr "Törlés hurkokon"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "A varrat láthatóságának csökkentéséhez zárt hurok extrudálásnál egy kis befelé irányuló mozgás történik, mielőtt az extruder elhagyná a hurkot."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Törlés befelé"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Csak a külső falakra vonatkozik, beleértve a furatok kontúrjait is. Törlés közben a forró fúvókát a már kinyomtatott belső falak felé mozgatja, hogy csökkentse a frissen nyomtatott műanyag újramelegedését és a varratnyomokat.\n"
+"\n"
+"Különösen hasznos 0,1 mm alatti rétegmagasságnál, ahol a törlésnyomok jobban látszanak.\n"
+"\n"
+"A szokásos törlést használja, ha nincs még kinyomtatott szomszédos belső fal (egyfalú területek vagy Külső/Belső falsorrend), illetve ha nem található alátámasztott befelé vezető útvonal, például szűk sarkoknál vagy varrathézagoknál."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Törlés befelé távolsága"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Az a távolság, amennyivel a törlési útvonal eltolódik a külső kerülettől, milliméterben vagy a külső fal tényleges extrudálási szélességének százalékában megadva.\n"
+"\n"
+"Például az 50% a külső fal szélességének felével tolja el az útvonalat. A tényleges eltolást korlátozza a külső fal tényleges szélessége és a szomszédos falig rendelkezésre álló hely is, ezért a 100% feletti értékeknek vagy az ezzel egyenértékű abszolút távolságnak nincs további hatása. Az eltolás kikapcsolásához állítsd 0-ra."
+
 msgid "Wipe before external loop"
 msgstr "Törlés a külső hurok előtt"
 
@@ -16818,8 +17007,9 @@ msgstr "Felveszi az új szerszámot anélkül, hogy megvárná a nyomtatási hő
 msgid "No sparse layers (beta)"
 msgstr "Nincsenek ritka rétegek (béta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Ha engedélyezed, nem készül törlőtorony azokon a rétegeken, ahol nincs szerszámváltás. A szerszámváltást tartalmazó rétegeknél az extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. Ügyelj arra, hogy ez ne okozzon ütközést a nyomtatás során."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Ha be van kapcsolva, a törlőtorony nem kerül nyomtatásra azokon a rétegeken, ahol nincs eszközváltás. Az eszközváltást tartalmazó rétegeken az extruder lefelé mozdul, hogy kinyomtassa a törlőtornyot, így a torony a modell alá kerül, és a szerszámfejnek le kell nyúlnia hozzá. Azok az elrendezések, ahol ez ütközne egy már kinyomtatott tárggyal, elutasításra kerülnek. Nincs hatása sima Timelapse vagy fúvókalerakódás-érzékelés esetén, mert ezekhez minden rétegen kell torony."
 
 msgid "Prime all printing extruders"
 msgstr "Az összes nyomtató extruder előkészítése"
@@ -16845,6 +17035,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Ciklikus"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ciklikus sorrend"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"A ciklikus eszközváltási sorrend által használt egyéni filamentsorrend, vesszővel elválasztott filamentszámokként (pl. \"3,2,1,4\").\n"
+"Minden réteg ezt a sorrendet követve nyomtatja a filamentjeit; a fel nem sorolt filamentek utoljára kerülnek nyomtatásra, növekvő sorrendben.\n"
+"Hagyd üresen, ha a filamenteket növekvő sorrendben szeretnéd végigjárni."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Ciklikus sorrend alkalmazása a kezdőrétegre"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"A ciklikus eszközváltási sorrendet a kezdőrétegre is alkalmazza.\n"
+"Alapértelmezés szerint ki van kapcsolva, mert a kezdőréteg helyette a legjobb asztalra tapadás érdekében kerül sorba rendezésre: azok a filamentek, amelyek kicsi, törékeny kezdőréteg-elemeket nyomtatnak, utoljára kerülnek sorra, így a következő eszközváltások és mozgások kisebb eséllyel szakítják le ezeket a gyengén rögzített részeket. Ez a kezdőréteg-sorrend figyelembe veszi a kezdőréteghez beállított egyéni filamentsorrendet is, ha van ilyen. A ciklikus sorrend előnye (a további eszközváltások több időt adnak minden rétegnek a hűlésre) nem érvényes a kezdőrétegre, amely a tapadás érdekében lassan és forrón készül.\n"
+"Csak akkor kapcsold be, ha pontosan ugyanarra az eszközsorrendre van szükséged minden rétegen, beleértve az elsőt is, ezen tapadásoptimalizálás rovására."
+
 msgid "Slice gap closing radius"
 msgstr "Szeletelési hézag lezárási sugara"
 
@@ -16854,9 +17072,6 @@ msgstr "A háromszögháló szeletelésekor kitölti a hézagzárási sugár ké
 msgid "Slicing Mode"
 msgstr "Szeletelési mód"
 
-msgid "Other"
-msgstr "Egyéb"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Használd a \"Páros-páratlan\" opciót a 3DLabPrint repülőgépmodellekhez. Használd a \"Hézagok lezárása\" lehetőséget a modell összes házagának lezárásához."
 
@@ -17854,6 +18069,14 @@ msgstr "Nincs ellenőrzés"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Ne futtass érvényességi ellenőrzéseket, például G-kód útvonalütközés-ellenőrzést."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Szigorú mód"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Nem nulla kilépési kóddal lép ki, ha a szeletelés olyan nem kritikus figyelmeztetést ad, amely egyébként csak naplózásra kerülne, például ha egy modellhez támasz kellene, miközben a támasz ki van kapcsolva. Használd CI-ben vagy szkriptelt folyamatokban, amelyek soha nem adhatnak ki észrevétlenül hibás szeletelést. Minden ilyen figyelmeztetés stabil osztállyal szerepel a result.json `warnings` tömbjében is, amely csak Linuxon készül el. Nem használható a --no-check kapcsolóval együtt, amely kihagyja a támaszellenőrzést."
+
 msgid "Normative check"
 msgstr "Normatív ellenőrzés"
 
@@ -17866,11 +18089,28 @@ msgstr "Kimeneti modell információ"
 msgid "This outputs the model’s information."
 msgstr "Kimeneti modell információ."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Háló vizsgálata (JSON a stdout-ra)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Kiír a stdout-ra egy JSON összegzést minden betöltött tárgyról, majd kilép: a befoglaló dobozait és a konvex burok azon lapjait, amelyekre lefektethető, ezek normálisaival, területével és középpontjával együtt. Ezek közül a lapok közül választanak a --ground-* kapcsolók. Az --info géppel olvasható alternatívája."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Festés vizsgálata (JSON a stdout-ra)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Kiír egy strukturált JSON összegzést a betöltött modellen már tárolt minden festett rétegről (támaszok, varrat, MMU-szín, barázdált felület) — állapotonkénti lapszám, felület és a hálóhoz viszonyított befoglaló doboz —, majd kilép. A festőeszközök felületen történő megnyitásának géppel olvasható alternatívája."
+
 msgid "Export Settings"
 msgstr "Beállítások exportálása"
 
-msgid "This exports settings to a file."
-msgstr "Beállítások exportálása egy fájlba."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Ez fájlba exportálja a beállításokat. A - használatával a stdout-ra írja őket."
 
 msgid "Send progress to pipe"
 msgstr "Folyamat elküldése"
@@ -17926,6 +18166,30 @@ msgstr "Forgatás Y körül"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Az Y tengely körüli forgatási szög fokban."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Fektetés a legnagyobb lapra"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Minden tárgyat a konvex burkának legnagyobb lapjára fektet, és ráejti az asztalra. Az egyforma méretű lapok közül a már lefelé néző marad. Azok a tárgyak, amelyeknek nincs elég nagy lapjuk a megtámaszkodáshoz, változatlanok maradnak. Az átalakítások a parancssori sorrendben futnak, így az ezen kapcsoló előtt megadott forgatások érvényesülnek. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Fektetés lapra normális szerint"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Minden tárgyat a konvex burok azon lapjára fektet, amelynek kifelé mutató normálisa a legközelebb van az NX,NY,NZ irányhoz, és ráejti az asztalra. Az irány a tárgy koordinátáiban értendő, amelyek tartalmazzák az ezen kapcsoló előtt megadott forgatásokat, és megegyeznek az asztal tengelyeivel, hacsak a bemeneti fájl el nem forgatja a tárgyat. Például az 1,0,0 a +X oldalára állítja a tárgyat. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Fektetés pontban lévő lapra"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Minden tárgyat a konvex burok azon lapjára fektet, amely tartalmazza az X,Y,Z pontot, és ráejti az asztalra. A pont a tárgy koordinátáiban értendő, amelyek tartalmazzák az ezen kapcsoló előtt megadott forgatásokat; az --inspect-mesh ezekben adja meg a lapok középpontját. Azok a tárgyak, amelyeknek nincs ilyen lapjuk, változatlanok maradnak, és a futás hibával áll le, ha egyetlen tárgynak sincs ilyen lapja. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást."
+
 msgid "Scale the model by a float factor."
 msgstr "A modell méretezése egy lebegő tényezővel"
 
@@ -21110,6 +21374,18 @@ msgstr "Ez a művelet nem vonható vissza. Folytatod?"
 msgid "Skipping objects."
 msgstr "Objektumok kihagyása."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Anyagarány"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modellmagasság"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Arány"
+
 msgid "Select Filament"
 msgstr "Filament kiválasztása"
 
@@ -21392,12 +21668,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Szárítás – páramentesítés"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " maximális szárítási hőmérséklete "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s maximális szárítási hőmérséklete %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " minimális szárítási hőmérséklete "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s minimális szárítási hőmérséklete %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21843,6 +22121,97 @@ msgstr ""
 "Kunkorodás elkerülése\n"
 "Tudtad, hogy a kunkorodásra hajlamos anyagok (például ABS) nyomtatásakor az asztal hőmérsékletének növelése csökkentheti a kunkorodás valószínűségét?"
 
+#~ msgid "Other"
+#~ msgstr "Egyéb"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Bal: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Jobb: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "A maximális hőmérséklet nem haladhatja meg ezt: "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: "
+
+#~ msgid "up to"
+#~ msgstr "legfeljebb"
+
+#~ msgid "above"
+#~ msgstr "felett"
+
+#~ msgid "from"
+#~ msgstr "ettől"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Konfigurációs csomag: "
+
+#~ msgid " updated to "
+#~ msgstr " frissítve erre: "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Csoportosítási hiba: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " nem helyezhető ide: "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " maximális szárítási hőmérséklete "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " minimális szárítási hőmérséklete "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "ehhez kell"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "nincs engedélyezve"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "az anyag nincs közzétéve"
+
+#~ msgid "Select the language"
+#~ msgstr "Válaszd ki a nyelvet"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Bővítmény kiválasztása"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Az az irány, amelyben a felső felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n"
+#~ "A Kifelé a felület közepén kezd, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélén kezd, és a középen lévő szűk ívekkel fejeződik be.\n"
+#~ "Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Az az irány, amelyben az alsó felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n"
+#~ "A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja az első réteg tapadását azokon az asztalokon, ahol a középen lévő szűk ívek nem tapadnak meg jól. A Kifelé a közepén kezd, a felesleges anyagot a szélek felé tolva.\n"
+#~ "Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Ha engedélyezed, nem készül törlőtorony azokon a rétegeken, ahol nincs szerszámváltás. A szerszámváltást tartalmazó rétegeknél az extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. Ügyelj arra, hogy ez ne okozzon ütközést a nyomtatás során."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Beállítások exportálása egy fájlba."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "A natív Wayland élőképhez a GStreamer GTK videonyelő szükséges. Telepítsd a gtksink beépülő modult a GStreamerhez, majd indítsd újra az OrcaSlicert."
 
diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po
index 9af642f536..a28bfe7c7e 100644
--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2466,15 +2466,6 @@ msgstr "È disponibile un aggiornamento. Apri la finestra di dialogo del bundle
 msgid "%s has been removed."
 msgstr "%s è stato rimosso."
 
-msgid "Switching application language"
-msgstr "Cambio lingua applicazione"
-
-msgid "Select the language"
-msgstr "Seleziona la lingua"
-
-msgid "Language"
-msgstr "Lingua"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3715,11 +3706,15 @@ msgstr "Ritira il filamento attuale sul Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Cambia traccia sul Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "La temperatura massima non può superare "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "La temperatura massima non può superare %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "La temperatura minima non deve essere inferiore a "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "La temperatura minima non deve essere inferiore a %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4605,6 +4600,15 @@ msgstr ""
 "Copia del G-code temporaneo sul G-code di uscita non riuscita. Forse la scheda SD è protetta da scrittura?\n"
 "Messaggio di errore: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Copia del G-code temporaneo nel G-code di output non riuscita.\n"
+"Messaggio di errore: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Copia del G-code temporaneo nel G-code di uscita non riuscita. Potrebbe esserci un problema nel dispositivo di destinazione. Prova ad esportare di nuovo o usa un dispositivo diverso. Il file G-code corrotto è su %1%.tmp."
@@ -4907,6 +4911,9 @@ msgstr ""
 "Sì - Modifica queste impostazioni ed abilita la modalità spirale automaticamente\n"
 "No - Annulla l'attivazione della modalità a spirale"
 
+msgid "N/A"
+msgstr "N/D"
+
 msgid "Printing"
 msgstr "Stampa"
 
@@ -5337,14 +5344,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Il valore %s è fuori intervallo. L'intervallo valido è da %d a %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"È %s%% o %s %s?\n"
-"Sì per %s%%, \n"
-"NO per %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "È %s%% o %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5366,29 +5370,22 @@ msgstr "Schema non valido. Utilizzare N, N#K o un elenco separato da virgole con
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Formato non valido. Formato vettoriale previsto: \"%1%\""
 
-msgid "N/A"
-msgstr "N/D"
-
 # AI Translated
 msgid "System agents"
 msgstr "Agenti di sistema"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Nessun plugin selezionato"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Aggiungi plugin"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Seleziona plugin"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Rimuovi plugin"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Nessun plugin selezionato"
+
 # AI Translated
 msgid "Configure"
 msgstr "Configura"
@@ -5644,14 +5641,20 @@ msgstr "Imposta al valore ottimale"
 msgid "Regroup filament"
 msgstr "Raggruppa nuovamente i filamenti"
 
-msgid "up to"
-msgstr "fino a"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "fino a %1% mm"
 
-msgid "above"
-msgstr "sopra"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "sopra %1% mm"
 
-msgid "from"
-msgstr "da"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "da %1% a %2% mm"
 
 msgid "Usage"
 msgstr "Utilizzo"
@@ -6013,7 +6016,7 @@ msgstr "Volume:"
 msgid "Size:"
 msgstr "Dimensione:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Sono stati trovati conflitti di percorsi nel G-code sullo strato %d, Z = %.2lfmm. Si prega di separare gli oggetti in conflitto (%s <-> %s)."
 
@@ -6327,6 +6330,14 @@ msgstr "Salva progetto con nome"
 msgid "Save current project as"
 msgstr "Salva progetto corrente con nome"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Pubblica 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Esporta un file 3MF con le impostazioni selezionate incorporate"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importa 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7602,6 +7613,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inferiore"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Questa impostazione non specifica un tipo di funzionalità del plugin."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Questa impostazione specifica un tipo di funzionalità del plugin non riconosciuto: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Selezione plugin"
@@ -8163,6 +8182,14 @@ msgstr "Si prega di confermare che i G-code all'interno di questi profili sono s
 msgid "Customized Preset"
 msgstr "Profilo personalizzato"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Alcune impostazioni pubblicate non sono state applicate:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Alcuni slot filamento sono stati modificati:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Il nome dei componenti all'interno del file STEP non è in formato UTF-8!"
 
@@ -8570,6 +8597,21 @@ msgstr "Salva file elaborato con nome:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Il file %s è stato inviato alla memoria della stampante e può essere visualizzato da lì."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Pubblica il file 3MF come:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Esportazione del file 3MF pubblicato non riuscita.\n"
+"Verifica se la cartella esiste online o se altri programmi hanno il file aperto."
+
+msgid "Publish"
+msgstr "Pubblica"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Il tipo di ugello non è impostato. Impostare l'ugello e riprovare."
 
@@ -8784,9 +8826,6 @@ msgstr "Vuoi continuare?"
 msgid "Language selection"
 msgstr "Selezione lingua"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Cambio lingua applicazione durante la modifica di alcuni profili."
-
 msgid "Asia-Pacific"
 msgstr "Asia-Pacifico"
 
@@ -8892,6 +8931,9 @@ msgstr "Percorso istanza attuale: "
 msgid "General"
 msgstr "Generale"
 
+msgid "Language"
+msgstr "Lingua"
+
 msgid "Metric"
 msgstr "Metrico"
 
@@ -9353,9 +9395,6 @@ msgstr "Quando si scorre il cursore degli strati nell'anteprima elaborata, gli s
 msgid "Dimmed layer brightness"
 msgstr "Luminosità degli strati attenuati"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9754,9 +9793,6 @@ msgstr "Vai alla pagina web di pubblicazione del modello"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Nota: la preparazione può richiedere alcuni minuti. Si prega di avere pazienza."
 
-msgid "Publish"
-msgstr "Pubblica"
-
 msgid "Publish was canceled"
 msgstr "La pubblicazione è stata annullata"
 
@@ -9772,6 +9808,81 @@ msgstr "Caricamento dati"
 msgid "Jump to webpage"
 msgstr "Vai alla pagina web"
 
+# AI Translated
+msgid "Material"
+msgstr "Materiale"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filamento misto"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Alcuni filamenti misti dipendono da filamenti che non verranno pubblicati:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filamento %d (misto)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% richiede %2%, che non è abilitato."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% richiede %2%, il cui materiale non verrà pubblicato."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Per pubblicare un filamento misto, abilita ogni filamento che utilizza e scegli Pubblicazione completa oppure soddisfa il suo requisito Tipo."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Pubblica comunque"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Pubblica 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Seleziona quali impostazioni pubblicare nel file 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki di Pubblica 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Guida video di Pubblica 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filamento misto - pubblicato per intero quando sopra è selezionato \"Abilita\""
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Pubblica questo filamento misto e abilita + pubblica per intero i suoi filamenti componenti"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Pubblica questo slot filamento nel file 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Pubblicazione completa"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Incorpora l'intero filamento di questo slot nel file 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtra non selezionati"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Salva %s con nome"
@@ -9789,6 +9900,10 @@ msgstr "Copia in questo profilo tutti i valori ereditati dal profilo padre e rim
 msgid "Detach from parent"
 msgstr "Scollega dal genitore"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Salva senza genitore"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Profilo unico"
@@ -10493,9 +10608,17 @@ msgstr "È necessaria una torre di spurgo per il rilevamento degli ammassi. Potr
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "L'abilitazione sia dell'altezza Z precisa che della torre di spurgo potrebbe causare errori di slicing. Vuoi comunque abilitare l'altezza Z precisa?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Il timelapse fluido richiede una torre di spurgo su ogni strato, il che non è compatibile con \"Nessuno strato sparso\". \"Nessuno strato sparso\" è stato disattivato."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "È necessaria una torre di spurgo per una modalità timelapse fluida. Potrebbero esserci dei difetti sul modello senza una torre di spurgo. Vuoi abilitare la torre di spurgo?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Nessuno strato sparso\" non è compatibile con il timelapse fluido, che richiede una torre di spurgo su ogni strato. Il timelapse è passato alla modalità tradizionale."
+
 msgid "Still print by object?"
 msgstr "Stampare ancora per oggetto?"
 
@@ -10869,9 +10992,6 @@ msgstr "Profili di processo compatibili"
 msgid "Printable space"
 msgstr "Spazio di stampa"
 
-msgid "Printer Agent"
-msgstr "Agente stampante"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Selezionare l'implementazione dell'agente di rete per la comunicazione con la stampante. Gli agenti disponibili vengono registrati all'avvio."
 
@@ -11280,14 +11400,6 @@ msgstr "Numero di estrusori"
 msgid "Capabilities"
 msgstr "Caratteristiche"
 
-# AI Translated
-msgid "Left: "
-msgstr "Sinistra: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Destra: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Mostra tutti i profili (compresi quelli non compatibili)"
 
@@ -12134,15 +12246,22 @@ msgstr "Riparazione annullata"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Copia del file %1% su %2% non riuscita: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Download dei nuovi profili produttore: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Pacchetto di configurazione: %1% aggiornato a %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Download dei profili produttore non riuscito: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Controllare le modifiche non salvate prima di aggiornare la configurazione."
 
-msgid "Configuration package: "
-msgstr "Pacchetto di configurazione: "
-
-msgid " updated to "
-msgstr " aggiornato a "
-
 msgid "Open G-code file:"
 msgstr "Apri un file G-code:"
 
@@ -12202,11 +12321,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "La compensazione della risonanza è supportata solo da Klipper, RepRapFirmware e Marlin 2"
 
-msgid "Grouping error: "
-msgstr "Errore di raggruppamento: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Errore di raggruppamento: %1% non può essere collocato nell'ugello sinistro"
 
-msgid " can not be placed in the "
-msgstr " non può essere posizionato nel "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Errore di raggruppamento: %1% non può essere collocato nell'ugello destro"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12320,6 +12443,10 @@ msgstr "%1% è troppo vicino ad altri oggetti e potrebbe causare collisioni."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% è troppo alto e si verificheranno collisioni."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "La posizione relativa del modello e della torre di spurgo non soddisfa i requisiti della funzione \"Nessuno strato sparso\". Modifica le loro posizioni relative, riduci l'altezza del modello oppure disattiva \"Nessuno strato sparso\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " è troppo vicino all'area di esclusione e potrebbero verificarsi collisioni durante la stampa."
 
@@ -12679,6 +12806,9 @@ msgstr "Usa 3MF invece di G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Abilita questa opzione se la stampante accetta un file 3MF come processo di stampa. Quando è abilitata, Orca Slicer invia il file elaborato come .gcode.3mf, invece di un semplice file .gcode."
 
+msgid "Printer Agent"
+msgstr "Agente stampante"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Selezionare l'implementazione dell'agente di rete per la comunicazione con la stampante."
 
@@ -13740,6 +13870,10 @@ msgstr "Rettilineo allineato"
 msgid "Concentric"
 msgstr "Concentrico"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spirale interna"
+
 msgid "Hilbert Curve"
 msgstr "Curva di Hilbert"
 
@@ -13831,13 +13965,13 @@ msgstr "Ordine di riempimento della superficie superiore"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direzione in cui vengono riempite le superfici superiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n"
-"Verso l'esterno inizia dal centro della superficie, in modo che il materiale in eccesso venga spinto verso il bordo dove è meno visibile. Verso l'interno inizia dal bordo e termina con le curve strette al centro.\n"
-"L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni."
+"Direzione in cui vengono riempite le superfici superiori quando si usa un motivo che parte dal centro (Concentrico, Spirale interna, Corde di Archimede, Spirale a ottogramma).\n"
+"Verso l'esterno parte dal centro della superficie, così il materiale in eccesso viene spinto verso il bordo, dove è meno visibile. Verso l'interno parte dal bordo e termina con le curve strette al centro.\n"
+"Predefinito usa l'ordinamento del percorso più breve, che può procedere in entrambe le direzioni."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13845,13 +13979,13 @@ msgstr "Ordine di riempimento della superficie inferiore"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direzione in cui vengono riempite le superfici inferiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n"
-"Verso l'interno inizia ogni superficie con le curve esterne più ampie, il che migliora l'adesione del primo strato sui piatti di stampa dove le curve strette al centro potrebbero non aderire. Verso l'esterno inizia dal centro, spingendo il materiale in eccesso verso il bordo.\n"
-"L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni."
+"Direzione in cui vengono riempite le superfici inferiori quando si usa un motivo che parte dal centro (Concentrico, Spirale interna, Corde di Archimede, Spirale a ottogramma).\n"
+"Verso l'interno inizia ogni superficie con le curve esterne più ampie, migliorando l'adesione del primo strato sui piatti su cui le curve strette al centro potrebbero non aderire. Verso l'esterno parte dal centro e spinge il materiale in eccesso verso il bordo.\n"
+"Predefinito usa l'ordinamento del percorso più breve, che può procedere in entrambe le direzioni."
 
 msgid "Internal solid infill pattern"
 msgstr "Motivo riempimento solido interno"
@@ -13954,6 +14088,14 @@ msgstr "Senso antiorario"
 msgid "Clockwise"
 msgstr "Senso orario"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Distanza dall'asta"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Distanza orizzontale tra la punta dell'ugello e il bordo più lontano dell'asta. Usata per evitare collisioni nella stampa per oggetto."
+
 msgid "Height to rod"
 msgstr "Altezza asta"
 
@@ -16132,6 +16274,20 @@ msgstr "Rileva pareti sporgenti"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Rileva la percentuale di sporgenza rispetto alla larghezza della parete e utilizza un velocità di stampa differente. Per una sporgenza del 100%%, viene utilizzata la velocità dei ponti."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Stampa per ultime le pareti non supportate"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"I perimetri di stampa che si trovano interamente in aria vengono stampati solo quando qualcosa può sostenerli:\n"
+"sono estrusi dopo le altre pareti della loro isola, partendo dalla più interna, qualunque sia l'ordine delle pareti.\n"
+"Un perimetro che solo i ponti di questo strato possono ancorare attende che tali ponti siano stampati, mentre un perimetro che corre accanto a una parete supportata mantiene il suo posto prima del riempimento, che lo richiede come ancoraggio."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Pareti esterne"
@@ -16576,6 +16732,39 @@ msgstr "Spurgo sui perimetri di stampa"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Per ridurre al minimo la visibilità della cucitura in un'estrusione ad anello chiuso, viene eseguito un piccolo movimento verso l'interno prima che l'estrusore lasci il perimetro."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Spurgo verso l'interno"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Si applica solo alle pareti esterne, inclusi i contorni dei fori. Durante lo spurgo sposta l'ugello caldo verso le pareti interne già stampate, per ridurre il riscaldamento della plastica appena depositata e i segni di cucitura.\n"
+"\n"
+"Particolarmente utile con altezze strato inferiori a 0,1 mm, dove i segni di spurgo sono più visibili.\n"
+"\n"
+"Usa lo spurgo normale se nessuna parete interna adiacente è già stata stampata (zone a parete singola oppure ordine delle pareti Esterna/Interna) o se non si trova un percorso verso l'interno che sia supportato, ad esempio in angoli stretti o in corrispondenza di interruzioni della cucitura."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Distanza di spurgo verso l'interno"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Distanza di cui il percorso di spurgo viene spostato rispetto al perimetro esterno, espressa in millimetri o in percentuale della larghezza di estrusione effettiva della parete esterna.\n"
+"\n"
+"Ad esempio, 50% sposta il percorso di metà della larghezza della parete esterna. Lo spostamento effettivo è limitato sia dalla larghezza effettiva della parete esterna sia dallo spazio disponibile fino alla parete adiacente, perciò valori superiori a 100% o una distanza assoluta equivalente non hanno alcun effetto aggiuntivo. Imposta 0 per disattivare lo spostamento."
+
 msgid "Wipe before external loop"
 msgstr "Spurgo prima del perimetro esterno"
 
@@ -16842,8 +17031,9 @@ msgstr "Preleva la nuova testina senza attendere che raggiunga la temperatura di
 msgid "No sparse layers (beta)"
 msgstr "Nessuno strato sparso (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Se abilitata, la torre di spurgo non verrà stampata sugli strati in cui non viene effettuato alcun cambio di testina. Sui strati con un cambio di testina, l'estrusore si sposterà verso il basso per stampare la torre di spurgo. L'utente dovrà accertarsi che non avvengano collisioni con la stampa."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Se abilitata, la torre di spurgo non viene stampata sugli strati senza cambi testina. Sugli strati con un cambio testina l'estrusore scende per stampare la torre di spurgo, perciò la torre finisce sotto il modello e la testa di stampa deve abbassarsi fino ad essa. Le disposizioni in cui ciò comporterebbe una collisione con un oggetto già stampato vengono rifiutate. Non ha effetto con il timelapse fluido o con il rilevamento degli ammassi sull'ugello, che richiedono una torre su ogni strato."
 
 msgid "Prime all printing extruders"
 msgstr "Prepara tutti gli estrusori di stampa"
@@ -16869,6 +17059,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Ciclico"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ordine ciclico"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Sequenza di filamenti personalizzata usata dall'ordinamento ciclico dei cambi testina, come numeri di filamento separati da virgole (ad es. \"3,2,1,4\").\n"
+"Ogni strato stampa i suoi filamenti seguendo questa sequenza; i filamenti non elencati vengono stampati per ultimi, in ordine crescente.\n"
+"Lascia vuoto per scorrere i filamenti in ordine crescente."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Applica l'ordine ciclico al primo strato"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Applica l'ordine ciclico dei cambi testina anche al primo strato.\n"
+"Per impostazione predefinita è disattivato, perché il primo strato viene invece ordinato per la migliore adesione al piatto: i filamenti che stampano dettagli piccoli e fragili del primo strato vengono stampati per ultimi, così i cambi testina e gli spostamenti successivi hanno meno probabilità di staccare quelle parti ancorate debolmente. Questo ordine del primo strato rispetta anche una sequenza di filamenti personalizzata per il primo strato, quando ne è impostata una. Il vantaggio dell'ordine ciclico (i cambi testina aggiuntivi danno a ogni strato più tempo per raffreddarsi) non si applica al primo strato, che viene stampato lentamente e caldo per l'adesione.\n"
+"Abilita questa opzione solo se ti serve esattamente la stessa sequenza di testine su ogni strato, incluso il primo, a scapito di quell'ottimizzazione dell'adesione."
+
 msgid "Slice gap closing radius"
 msgstr "Raggio di chiusura spazi vuoti"
 
@@ -16878,9 +17096,6 @@ msgstr "Le fessure più piccole di 2 volte il raggio di chiusura degli spazi vuo
 msgid "Slicing Mode"
 msgstr "Modalità elaborazione"
 
-msgid "Other"
-msgstr "Altro"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Usa \"Pari-dispari\" per modelli di aeroplano 3DLabPrint. Utilizza \"Chiudi fori\" per chiudere tutti i fori del modello."
 
@@ -17877,6 +18092,14 @@ msgstr "Nessun controllo"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Non eseguire alcun controllo di validità, come il controllo dei conflitti di percorso del G-code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Modalità rigorosa"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Termina con un codice di uscita diverso da zero quando l'elaborazione genera un avviso non critico che altrimenti verrebbe solo registrato, ad esempio un modello che richiede supporti mentre i supporti sono disattivati. Usala in CI o in pipeline automatizzate che non devono mai consegnare un'elaborazione sottilmente difettosa. Ciascuno di questi avvisi è inoltre elencato con una classe stabile nell'array `warnings` di result.json, che viene scritto solo su Linux. Non può essere combinata con --no-check, che salta il controllo dei supporti."
+
 msgid "Normative check"
 msgstr "Controllo normativo"
 
@@ -17889,11 +18112,28 @@ msgstr "Informazioni modello di output"
 msgid "This outputs the model’s information."
 msgstr "Fornisce le informazioni del modello."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Ispeziona mesh (JSON su stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Stampa su stdout un riepilogo JSON di ogni oggetto caricato, poi esce: i suoi riquadri di delimitazione e le facce dell'inviluppo convesso su cui può appoggiarsi, con le relative normali, aree e centri. Sono queste le facce tra cui scelgono le opzioni --ground-*. Alternativa leggibile da una macchina a --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Ispeziona pittura (JSON su stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Stampa un riepilogo JSON strutturato di ogni livello dipinto (supporti, cucitura, colore MMU, superficie ruvida) già memorizzato nel modello caricato — numero di facce, area della superficie e riquadro di delimitazione locale alla mesh per ciascuno stato — poi esce. Alternativa leggibile da una macchina all'apertura degli strumenti di pittura nell'interfaccia."
+
 msgid "Export Settings"
 msgstr "Esporta impostazioni"
 
-msgid "This exports settings to a file."
-msgstr "Esporta le impostazioni in un file."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Esporta le impostazioni in un file. Usa - per scriverle su stdout."
 
 msgid "Send progress to pipe"
 msgstr "Invia l'avanzamento al pipe"
@@ -17949,6 +18189,30 @@ msgstr "Ruota attorno ad Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Angolo di rotazione attorno all'asse Y in gradi."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Appoggia sulla faccia più grande"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Appoggia ogni oggetto sulla faccia più grande del suo inviluppo convesso e lo fa cadere sul piatto. Tra facce di uguale dimensione viene mantenuta quella già rivolta verso il basso. Gli oggetti privi di una faccia abbastanza grande su cui appoggiarsi restano invariati. Le trasformazioni vengono applicate nell'ordine della riga di comando, perciò le rotazioni indicate prima di questa opzione sono rispettate. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Appoggia sulla faccia per normale"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Appoggia ogni oggetto sulla faccia dell'inviluppo convesso la cui normale esterna è più vicina alla direzione NX,NY,NZ e lo fa cadere sul piatto. La direzione è espressa nelle coordinate dell'oggetto, che includono le rotazioni indicate prima di questa opzione e coincidono con gli assi del piatto a meno che il file di input non ruoti l'oggetto. Ad esempio, 1,0,0 appoggia l'oggetto sul suo lato +X. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Appoggia sulla faccia in un punto"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Appoggia ogni oggetto sulla faccia dell'inviluppo convesso che contiene il punto X,Y,Z e lo fa cadere sul piatto. Il punto è espresso nelle coordinate dell'oggetto, che includono le rotazioni indicate prima di questa opzione; --inspect-mesh riporta i centri delle facce in tali coordinate. Gli oggetti privi di una faccia simile restano invariati e l'esecuzione fallisce se nessun oggetto ne ha una. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento."
+
 msgid "Scale the model by a float factor."
 msgstr "Ridimensiona il modello in base a un fattore decimale."
 
@@ -21134,6 +21398,18 @@ msgstr "Questa azione non può essere annullata. Continuare?"
 msgid "Skipping objects."
 msgstr "Salto degli oggetti."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Proporzione materiale"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Altezza modello"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proporzione"
+
 msgid "Select Filament"
 msgstr "Seleziona filamento"
 
@@ -21416,12 +21692,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Essiccazione - Deumidificazione"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " la temperatura massima di essiccazione è "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "La temperatura massima di essiccazione di %s è %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " la temperatura minima di essiccazione è "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "La temperatura minima di essiccazione di %s è %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21867,6 +22145,97 @@ msgstr ""
 "Evita le deformazioni\n"
 "Sapevi che quando si stampano materiali soggetti a deformazioni come l'ABS, aumentare in modo appropriato la temperatura del piano riscaldato può ridurre la probabilità di deformazione?"
 
+#~ msgid "Other"
+#~ msgstr "Altro"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Sinistra: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Destra: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "La temperatura massima non può superare "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "La temperatura minima non deve essere inferiore a "
+
+#~ msgid "up to"
+#~ msgstr "fino a"
+
+#~ msgid "above"
+#~ msgstr "sopra"
+
+#~ msgid "from"
+#~ msgstr "da"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Pacchetto di configurazione: "
+
+#~ msgid " updated to "
+#~ msgstr " aggiornato a "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Errore di raggruppamento: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " non può essere posizionato nel "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " la temperatura massima di essiccazione è "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " la temperatura minima di essiccazione è "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "richiede"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "non abilitato"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materiale non pubblicato"
+
+#~ msgid "Select the language"
+#~ msgstr "Seleziona la lingua"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Seleziona plugin"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direzione in cui vengono riempite le superfici superiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n"
+#~ "Verso l'esterno inizia dal centro della superficie, in modo che il materiale in eccesso venga spinto verso il bordo dove è meno visibile. Verso l'interno inizia dal bordo e termina con le curve strette al centro.\n"
+#~ "L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direzione in cui vengono riempite le superfici inferiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n"
+#~ "Verso l'interno inizia ogni superficie con le curve esterne più ampie, il che migliora l'adesione del primo strato sui piatti di stampa dove le curve strette al centro potrebbero non aderire. Verso l'esterno inizia dal centro, spingendo il materiale in eccesso verso il bordo.\n"
+#~ "L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Se abilitata, la torre di spurgo non verrà stampata sugli strati in cui non viene effettuato alcun cambio di testina. Sui strati con un cambio di testina, l'estrusore si sposterà verso il basso per stampare la torre di spurgo. L'utente dovrà accertarsi che non avvengano collisioni con la stampa."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Esporta le impostazioni in un file."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "La funzione di visualizzazione in tempo reale nativa di Wayland richiede il ricevitore video GTK di GStreamer. Installare il modulo gtksink per GStreamer e riavviare OrcaSlicer."
 
diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po
index 8ee8813f1d..68691d6700 100644
--- a/localization/i18n/ja/OrcaSlicer_ja.po
+++ b/localization/i18n/ja/OrcaSlicer_ja.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2473,15 +2473,6 @@ msgstr "アップデートが利用可能です。プリセットバンドルの
 msgid "%s has been removed."
 msgstr "%sを削除しました。"
 
-msgid "Switching application language"
-msgstr "アプリケーション言語の切り替え"
-
-msgid "Select the language"
-msgstr "言語を選択"
-
-msgid "Language"
-msgstr "言語"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3729,11 +3720,15 @@ msgstr "Filament Track Switchで現在のフィラメントを引き戻す"
 msgid "Switch track at Filament Track Switch"
 msgstr "Filament Track Switchでトラックを切り替える"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "最高温度は次の値を超えることはできません "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "最高温度は %d を超えることはできません"
 
-msgid "The minmum temperature should not be less than "
-msgstr "最低温度は次の値を下回ることはできません "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "最低温度は %d を下回ることはできません"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4612,6 +4607,15 @@ msgstr ""
 "一時的なGコードの出力Gコードへのコピーに失敗しました。 もしかしたらSDカードが書き込みロックされていませんか？\n"
 "エラーメッセージ：%1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"一時G-codeから出力G-codeへのコピーに失敗しました。\n"
+"エラーメッセージ: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "一時Gコードの出力Gコードへのコピーに失敗しました。 ターゲットデバイスに問題がある可能性があります。もう一度エクスポートするか、別のデバイスを使用してみてください。 破損した出力Gコードは%1%.tmpにあります。"
@@ -4920,6 +4924,10 @@ msgstr ""
 "はい - 変更して、スパイラルモードを有効にします\n"
 "いいえ - 変更せず、スパイラルモードを有効しません"
 
+# AI Translated
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "造形中"
 
@@ -5350,13 +5358,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "値%sは範囲外です。有効な範囲は%dから%dです。"
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%% か、それとも %s %sですか？\n"
-"%s%% の場合ははい、 %s %s はいいえ。"
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%% か、それとも %s %sですか？"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5378,30 +5384,22 @@ msgstr "無効なパターンです。N、N#K、またはオプション#K付き
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "無効なフォーマット、%1%であるはずです。"
 
-# AI Translated
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "システムエージェント"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "プラグインが選択されていません"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "プラグインを追加"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "プラグインを選択"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "プラグインを削除"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "プラグインが選択されていません"
+
 # AI Translated
 msgid "Configure"
 msgstr "設定"
@@ -5658,14 +5656,20 @@ msgstr "最適に設定"
 msgid "Regroup filament"
 msgstr "フィラメントを再グルーピング"
 
-msgid "up to"
-msgstr "最大"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "%1% mm まで"
 
-msgid "above"
-msgstr "以上"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "%1% mm 以上"
 
-msgid "from"
-msgstr "から"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "%1% mm から %2% mm まで"
 
 msgid "Usage"
 msgstr "使用量"
@@ -6028,7 +6032,7 @@ msgstr "ボリューム"
 msgid "Size:"
 msgstr "サイズ:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "レイヤー%d、Z = %.2lfmmでG-codeパスの衝突が検出されました。衝突するオブジェクトをもっと離してください（%s <-> %s）。"
 
@@ -6336,6 +6340,14 @@ msgstr "プロジェクトを名前を付けて保存"
 msgid "Save current project as"
 msgstr "プロジェクトを名前を付けて保存"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MFを公開"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "選択した設定を埋め込んだ3MFファイルをエクスポートします"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "3MF/STL/STEP/SVG/OBJ/AMFをインポート"
 
@@ -7608,6 +7620,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "底面"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "この設定にはプラグイン機能タイプが指定されていません。"
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "この設定には認識できないプラグイン機能タイプが指定されています: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "プラグインの選択"
@@ -8177,6 +8197,14 @@ msgstr "これらのプリセット内のG-codeがマシンに損傷を与えな
 msgid "Customized Preset"
 msgstr "カスタマイズされたプリセット"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "一部の公開された設定を適用できませんでした:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "一部のフィラメントスロットが変更されました:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "ファイルのエンコーディング方式はUTF-8形式ではありません"
 
@@ -8589,6 +8617,21 @@ msgstr "名前を付けて保存:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "%sを送信しました、プリンターにて確認できます"
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MFファイルを次の名前で公開:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"公開する3MFファイルのエクスポートに失敗しました。\n"
+"フォルダーがオンラインで存在するか、他のプログラムがファイルを開いていないか確認してください。"
+
+msgid "Publish"
+msgstr "公開する"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "ノズルタイプが設定されていません。ノズルを設定して再試行してください。"
 
@@ -8802,9 +8845,6 @@ msgstr "続行しますか？"
 msgid "Language selection"
 msgstr "言語選択"
 
-msgid "Switching application language while some presets are modified."
-msgstr "アプリケーション言語を切り替える時に、プリセットの変更があります"
-
 msgid "Asia-Pacific"
 msgstr "アジア太平洋地域"
 
@@ -8909,6 +8949,9 @@ msgstr "現在のインスタンスのパス: "
 msgid "General"
 msgstr "一般"
 
+msgid "Language"
+msgstr "言語"
+
 msgid "Metric"
 msgstr "メートル"
 
@@ -9373,9 +9416,6 @@ msgstr "スライスプレビューで積層スライダーを操作する際、
 msgid "Dimmed layer brightness"
 msgstr "暗くした積層の明るさ"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9776,9 +9816,6 @@ msgstr "モデル公開ページに移動"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "注意: 準備するには数分かかる場合があります、暫くお待ち下さい。"
 
-msgid "Publish"
-msgstr "公開する"
-
 msgid "Publish was canceled"
 msgstr "公開は取り消しました"
 
@@ -9794,6 +9831,81 @@ msgstr "データをアップロード中"
 msgid "Jump to webpage"
 msgstr "ウェブページに移動"
 
+# AI Translated
+msgid "Material"
+msgstr "材料"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "混合フィラメント"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "一部の混合フィラメントは、公開されないフィラメントに依存しています:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "フィラメント %d (混合)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1%には%2%が必要ですが、有効化されていません。"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1%には%2%が必要ですが、その材料は公開されません。"
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "混合フィラメントを公開するには、使用しているすべてのフィラメントを有効にし、完全公開を選ぶか、タイプの要件を満たしてください。"
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "それでも公開"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MFを公開..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "3MFファイルで公開する設定を選択してください"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF公開のWiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF公開のビデオガイド"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "混合フィラメント - 上の「有効化」を選択すると全体が公開されます"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "この混合フィラメントを公開し、その構成フィラメントを有効化＋完全公開します"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "このフィラメントスロットを3MFファイルで公開します"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "完全公開"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "このスロットのフィラメント全体を3MFファイルに埋め込みます"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "未選択を絞り込み"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "%sを名前つけて保存"
@@ -9811,6 +9923,10 @@ msgstr "親プリセットから継承したすべての値をこのプリセッ
 msgid "Detach from parent"
 msgstr "親から分離"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "親なしで保存"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "独立したプリセット"
@@ -10517,9 +10633,17 @@ msgstr "クランピング検出にはプライムタワーが必要です。プ
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "正確なZ高さとプライムタワーの両方を有効にすると、スライスエラーが発生する可能性があります。それでも正確なZ高さを有効にしますか？"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "スムーズタイムラプスは全積層にプライムタワーが必要なため、「スパース層なし」とは併用できません。「スパース層なし」をオフにしました。"
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "スムーズタイムラプスビデオを作成するにはプライムタワーが必要です。プライムタワーを有効にしますか？"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "「スパース層なし」は、全積層にプライムタワーが必要なスムーズタイムラプスとは併用できません。タイムラプスを通常モードに切り替えました。"
+
 msgid "Still print by object?"
 msgstr "それでもオブジェクト別に印刷しますか？"
 
@@ -10886,9 +11010,6 @@ msgstr "互換性のあるプロセスプロファイル"
 msgid "Printable space"
 msgstr "造形可能領域"
 
-msgid "Printer Agent"
-msgstr "プリンターエージェント"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "プリンター通信用のネットワークエージェント実装を選択します。使用可能なエージェントは起動時に登録されます。"
 
@@ -11301,14 +11422,6 @@ msgstr "エクストルーダー数"
 msgid "Capabilities"
 msgstr "能力"
 
-# AI Translated
-msgid "Left: "
-msgstr "左: "
-
-# AI Translated
-msgid "Right: "
-msgstr "右: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "全てのプリセットを表示"
 
@@ -12160,15 +12273,22 @@ msgstr "修復を取消しました"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "ファイル %1% を %2% へのコピーが失敗しました (%3%)"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "新しいベンダープロファイルをダウンロード中: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "設定パッケージ: %1% を %2% に更新しました"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "ベンダープロファイルのダウンロードに失敗しました: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "構成を更新する前に、未保存の変更をご確認ください"
 
-msgid "Configuration package: "
-msgstr "設定パッケージ: "
-
-msgid " updated to "
-msgstr " を更新しました "
-
 msgid "Open G-code file:"
 msgstr "G-codeファイルを開く"
 
@@ -12232,11 +12352,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "インプットシェーピングはKlipper、RepRapFirmware、Marlin 2のみが対応しています。"
 
-msgid "Grouping error: "
-msgstr "グルーピングエラー: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "グルーピングエラー: %1% は左ノズルに配置できません"
 
-msgid " can not be placed in the "
-msgstr " に配置できません "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "グルーピングエラー: %1% は右ノズルに配置できません"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12350,6 +12474,10 @@ msgstr "%1% は他のオブジェクトと近すぎるため、衝突の可能
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% は高すぎます、衝突の可能性があります。"
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "モデルとプライムタワーの相対位置が「スパース層なし」機能の要件を満たしていません。相対位置を調整するか、モデルの高さを下げるか、「スパース層なし」をオフにしてください。"
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr "が除外領域に近すぎます。衝突の可能性があります。"
 
@@ -12722,6 +12850,9 @@ msgstr "G-codeの代わりに3MFを使用"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "プリンターが印刷ジョブとして3MFファイルを受け付ける場合に有効にします。有効にすると、Orca Slicerはスライス済みファイルを通常の.gcodeファイルではなく.gcode.3mfとして送信します。"
 
+msgid "Printer Agent"
+msgstr "プリンターエージェント"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "プリンター通信用のネットワークエージェント実装を選択します。"
 
@@ -13831,6 +13962,10 @@ msgstr "整列直線"
 msgid "Concentric"
 msgstr "同心"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "スパイラルインセット"
+
 msgid "Hilbert Curve"
 msgstr "ヒルベルト曲線"
 
@@ -13924,13 +14059,13 @@ msgstr "上面の充填順序"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、上面を充填する方向です。\n"
-"外向きは面の中心から始まるため、余分な材料が最も目立たない縁へ押し出されます。内向きは縁から始まり、中心の細かいカーブで終わります。\n"
-"デフォルトは最短経路順で、どちらの方向にもなり得ます。"
+"中心を起点とするパターン（同心、スパイラルインセット、アルキメデス螺旋、オクタグラムスパイラル）を使用する場合の、トップ面を充填する方向です。\n"
+"外側は面の中心から始まるため、余分な材料は最も目立たない縁へ押し出されます。内側は縁から始まり、中心の細かいカーブで終わります。\n"
+"デフォルトは最短経路順を使用し、どちらの方向にも進むことがあります。"
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13938,13 +14073,13 @@ msgstr "底面の充填順序"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、底面を充填する方向です。\n"
-"内向きは各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の密着性が向上します。外向きは中心から始まり、余分な材料を縁へ押し出します。\n"
-"デフォルトは最短経路順で、どちらの方向にもなり得ます。"
+"中心を起点とするパターン（同心、スパイラルインセット、アルキメデス螺旋、オクタグラムスパイラル）を使用する場合の、底面を充填する方向です。\n"
+"内側は各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の接着が改善します。外側は中心から始まり、余分な材料を縁へ押し出します。\n"
+"デフォルトは最短経路順を使用し、どちらの方向にも進むことがあります。"
 
 msgid "Internal solid infill pattern"
 msgstr "内部ソリッドインフィルパターン"
@@ -14053,6 +14188,14 @@ msgstr "反時計回り"
 msgid "Clockwise"
 msgstr "時計回り"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "ロッドまでの距離"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "ノズル先端からロッドの遠い側の端までの水平距離です。オブジェクト順の造形で衝突を回避するために使用されます。"
+
 msgid "Height to rod"
 msgstr "レールまでの高さ"
 
@@ -16392,6 +16535,20 @@ msgstr "オーバーハングを検出"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "この設定により、線幅に対するオーバーハングの割合を検出し、異なる速度で造形します。100%%のオーバーハングの場合、ブリッジの速度が使用されます。"
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "支えのない壁を最後に造形"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"完全に宙に浮いている壁面ループは、支えとなるものができてから造形されます。\n"
+"壁の順序にかかわらず、同じアイランドの他の壁の後に、最も内側から順に押し出されます。\n"
+"この積層のブリッジだけが固定できるループは、それらのブリッジが造形されるまで待ちます。一方、支えのある壁に沿って走るループは、それをアンカーとして必要とするインフィルの前という位置を保ちます。"
+
 # AI Translated
 msgid "Outer walls"
 msgstr "外壁"
@@ -16884,6 +17041,39 @@ msgstr "ループ上でワイプ"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "閉ループ押出における継ぎ目を目立たなくするため、押出機がループを離れる前にわずかに内側へ移動します。"
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "内側へ拭き上げ"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"穴の輪郭を含む外壁にのみ適用されます。拭き上げ中に高温のノズルを造形済みの内壁へ向かって動かし、造形したばかりの樹脂の再加熱と継ぎ目の跡を抑えます。\n"
+"\n"
+"拭き上げの跡が目立ちやすい積層ピッチ0.1 mm未満で特に有効です。\n"
+"\n"
+"隣接する内壁がまだ造形されていない場合（壁が1本のみの領域や、壁の順序が外側/内側の場合）、または細かい角や継ぎ目の隙間などで支えのある内向きの経路が見つからない場合は、通常の拭き上げを使用します。"
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "内側への拭き上げ距離"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"拭き上げ経路を外周から離す距離で、ミリメートルまたは実際の外壁の押出線幅に対する割合で指定します。\n"
+"\n"
+"例えば50%では、経路を外壁幅の半分だけずらします。実効オフセットは実際の外壁幅と隣接する壁までの利用可能な間隔の両方で制限されるため、100%を超える値や同等の絶対距離を指定しても追加の効果はありません。0に設定するとオフセットは無効になります。"
+
 # AI Translated
 msgid "Wipe before external loop"
 msgstr "外周ループ前のワイプ"
@@ -17186,8 +17376,9 @@ msgstr "印刷温度に達するのを待たずに新しいツールを取り付
 msgid "No sparse layers (beta)"
 msgstr "スパース層なし (ベータ)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "有効にすると、ツール変更がない場合にワイプタワーをプリントしなくなります。 ワイプタワーの高さが同期しなくなりますので、ツールチェンジのあるレイヤーでは、エクストルーダーがプリント面より下方に移動してワイプタワーをプリントするケースもあります。 この場合、プリントした部分との衝突がないことをご自身で確認しておく必要があります。"
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "有効にすると、ツール交換のない積層ではワイプタワーを造形しません。ツール交換のある積層では押出機が下降してワイプタワーを造形するため、タワーはモデルより下に位置し、ツールヘッドがそこまで下りる必要があります。造形済みのオブジェクトと衝突するような配置は拒否されます。全積層にタワーが必要なスムーズタイムラプスやノズル付着検出では効果がありません。"
 
 msgid "Prime all printing extruders"
 msgstr "全てのエクストルーダーでプライムを実施"
@@ -17213,6 +17404,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "循環"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "循環順"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"循環ツール交換順で使用するカスタムフィラメント順序です。フィラメント番号をカンマ区切りで指定します（例: 「3,2,1,4」）。\n"
+"各積層はこの順序に従ってフィラメントを造形します。記載のないフィラメントは最後に、昇順で造形されます。\n"
+"空欄のままにすると、フィラメントを昇順で巡回します。"
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "循環順を1層目にも適用"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"循環ツール交換順を1層目にも適用します。\n"
+"既定では無効です。1層目は代わりにベッド接着が最良になるよう並べ替えられるためです。1層目の小さく壊れやすい部分を造形するフィラメントを最後に回すことで、その後のツール交換や移動が、弱く固定された部分を剥がしにくくなります。この1層目の順序は、1層目用のカスタムフィラメント順序が設定されていればそれも尊重します。循環順の利点（ツール交換が増えることで各積層の冷却時間が長くなる）は、接着のために低速かつ高温で造形される1層目には当てはまりません。\n"
+"接着の最適化を犠牲にしてでも、1層目を含む全積層でまったく同じツール順序が必要な場合にのみ有効にしてください。"
+
 msgid "Slice gap closing radius"
 msgstr "隙間充填半径"
 
@@ -17223,9 +17442,6 @@ msgstr "三角メッシュのスライス時に、隙間閉じ半径の2倍よ
 msgid "Slicing Mode"
 msgstr "スライシングモード"
 
-msgid "Other"
-msgstr "その他"
-
 # AI Translated
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "3DLabPrintの飛行機モデルには「偶奇」を使用してください。モデル内のすべての穴を閉じるには「穴を閉じる」を使用してください。"
@@ -18286,6 +18502,14 @@ msgstr "チェックなし"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "G-codeパスの競合チェックなど、いかなる妥当性チェックも実行しません。"
 
+# AI Translated
+msgid "Strict mode"
+msgstr "厳格モード"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "サポートが無効なのにサポートが必要なモデルなど、通常はログに記録されるだけの重大でない警告がスライス時に発生した場合、ゼロ以外の終了コードで終了します。わずかに壊れたスライス結果を決して出荷してはならないCIやスクリプト処理で使用してください。そうした警告はいずれも、Linuxでのみ書き出されるresult.jsonの`warnings`配列に、安定したクラス名とともに列挙されます。サポート確認を省略する--no-checkとは併用できません。"
+
 # AI Translated
 msgid "Normative check"
 msgstr "規範チェック"
@@ -18300,11 +18524,28 @@ msgstr "出力モデル情報"
 msgid "This outputs the model’s information."
 msgstr "出力するモデル情報です。"
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "メッシュを検査 (JSONをstdoutへ)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "読み込んだ各オブジェクトのJSON要約をstdoutに出力して終了します。バウンディングボックスと、設置できる凸包の面、およびそれらの法線・面積・中心が含まれます。--ground-*オプションはこれらの面から選択します。--infoの機械可読版です。"
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "ペイントを検査 (JSONをstdoutへ)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "読み込んだモデルに保存済みの各ペイント層（サポート、継ぎ目、MMUカラー、ファジー壁面）について、状態ごとの面数・表面積・メッシュ座標系のバウンディングボックスを構造化JSONで出力して終了します。GUIでペイントギズモを開く操作の機械可読版です。"
+
 msgid "Export Settings"
 msgstr "エクスポート設定"
 
-msgid "This exports settings to a file."
-msgstr "設定をファイルにエクスポートします。"
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "設定をファイルにエクスポートします。- を指定するとstdoutに書き出します。"
 
 msgid "Send progress to pipe"
 msgstr "パイプに進捗を送信"
@@ -18365,6 +18606,30 @@ msgstr "Y軸周りの回転"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Y軸を中心とした回転角（度単位）。"
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "最大面を接地"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "各オブジェクトを凸包の最大面で接地させ、ベッドへ落とします。同じ大きさの面が複数ある場合は、すでに下を向いている面が保持されます。載せられるだけの大きさの面がないオブジェクトはそのまま残ります。変換はコマンドラインの順に実行されるため、このオプションより前に指定した回転は尊重されます。--orient 1 はすべての変換の後に実行され、向きを置き換えます。"
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "法線で面を接地"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "各オブジェクトを、外向き法線が方向 NX,NY,NZ に最も近い凸包の面で接地させ、ベッドへ落とします。方向はオブジェクト座標系で指定します。この座標系はこのオプションより前に指定した回転を含み、入力ファイルがオブジェクトを回転していない限りプレートの軸と一致します。例えば 1,0,0 はオブジェクトを +X 側で立たせます。--orient 1 はすべての変換の後に実行され、向きを置き換えます。"
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "指定点の面を接地"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "各オブジェクトを、点 X,Y,Z を含む凸包の面で接地させ、ベッドへ落とします。点はオブジェクト座標系で指定します。この座標系はこのオプションより前に指定した回転を含み、--inspect-mesh はこの座標系で面の中心を報告します。該当する面がないオブジェクトはそのまま残り、どのオブジェクトにも該当面がない場合は実行が失敗します。--orient 1 はすべての変換の後に実行され、向きを置き換えます。"
+
 msgid "Scale the model by a float factor."
 msgstr "指定した比率で伸縮する"
 
@@ -21678,6 +21943,18 @@ msgstr "この操作は元に戻せません。続行しますか？"
 msgid "Skipping objects."
 msgstr "オブジェクトをスキップ中。"
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "材料比率"
+
+# AI Translated
+msgid "Model Height"
+msgstr "モデル高さ"
+
+# AI Translated
+msgid "Ratio"
+msgstr "比率"
+
 msgid "Select Filament"
 msgstr "フィラメントを選択"
 
@@ -21960,12 +22237,14 @@ msgid "Drying-Dehumidifying"
 msgstr "乾燥 - 除湿"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " の最高乾燥温度は "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s の最高乾燥温度は %d°C です。"
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " の最低乾燥温度は "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s の最低乾燥温度は %d°C です。"
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22422,6 +22701,97 @@ msgstr ""
 "反りを避ける\n"
 "ABSのような反りやすい素材を印刷する場合、ヒートベッドの温度を適切に上げることで、反りが発生する確率を下げることができることをご存知ですか？"
 
+#~ msgid "Other"
+#~ msgstr "その他"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "左: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "右: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "最高温度は次の値を超えることはできません "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "最低温度は次の値を下回ることはできません "
+
+#~ msgid "up to"
+#~ msgstr "最大"
+
+#~ msgid "above"
+#~ msgstr "以上"
+
+#~ msgid "from"
+#~ msgstr "から"
+
+#~ msgid "Configuration package: "
+#~ msgstr "設定パッケージ: "
+
+#~ msgid " updated to "
+#~ msgstr " を更新しました "
+
+#~ msgid "Grouping error: "
+#~ msgstr "グルーピングエラー: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " に配置できません "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " の最高乾燥温度は "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " の最低乾燥温度は "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "が必要"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "未有効"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "材料が未公開"
+
+#~ msgid "Select the language"
+#~ msgstr "言語を選択"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "プラグインを選択"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、上面を充填する方向です。\n"
+#~ "外向きは面の中心から始まるため、余分な材料が最も目立たない縁へ押し出されます。内向きは縁から始まり、中心の細かいカーブで終わります。\n"
+#~ "デフォルトは最短経路順で、どちらの方向にもなり得ます。"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、底面を充填する方向です。\n"
+#~ "内向きは各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の密着性が向上します。外向きは中心から始まり、余分な材料を縁へ押し出します。\n"
+#~ "デフォルトは最短経路順で、どちらの方向にもなり得ます。"
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "有効にすると、ツール変更がない場合にワイプタワーをプリントしなくなります。 ワイプタワーの高さが同期しなくなりますので、ツールチェンジのあるレイヤーでは、エクストルーダーがプリント面より下方に移動してワイプタワーをプリントするケースもあります。 この場合、プリントした部分との衝突がないことをご自身で確認しておく必要があります。"
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "設定をファイルにエクスポートします。"
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "ネイティブWaylandのライブビューにはGStreamer GTKビデオシンクが必要です。GStreamer用のgtksinkプラグインをインストールし、OrcaSlicerを再起動してください。"
diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po
index c415c90195..dccc289f47 100644
--- a/localization/i18n/ko/OrcaSlicer_ko.po
+++ b/localization/i18n/ko/OrcaSlicer_ko.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -2481,15 +2481,6 @@ msgstr "사용 가능한 업데이트가 있습니다. 사전 설정 번들 대
 msgid "%s has been removed."
 msgstr "%s이(가) 제거되었습니다."
 
-msgid "Switching application language"
-msgstr "응용 프로그램 언어 전환"
-
-msgid "Select the language"
-msgstr "언어 선택"
-
-msgid "Language"
-msgstr "언어"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3729,11 +3720,15 @@ msgstr "Filament Track Switch에서 현재 필라멘트 되감기"
 msgid "Switch track at Filament Track Switch"
 msgstr "Filament Track Switch에서 트랙 전환"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "최대 온도는 다음 값을 초과할 수 없습니다 "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "최대 온도는 %d을(를) 초과할 수 없습니다"
 
-msgid "The minmum temperature should not be less than "
-msgstr "최소 온도는 다음 값보다 낮아서는 안 됩니다 "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "최소 온도는 %d보다 낮을 수 없습니다"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4627,6 +4622,15 @@ msgstr ""
 "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. SD 카드가 쓰기 잠겨 있나요?\n"
 "오류 메시지입니다: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"임시 G-code를 출력 G-code로 복사하지 못했습니다.\n"
+"오류 메시지: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. 대상 장치에 문제가 있을 수 있으니 다시 내보내거나 다른 장치를 사용해 보세요. 손상된 출력 Gcode는 %1%.tmp에 있습니다."
@@ -4931,6 +4935,10 @@ msgstr ""
 "예 - 이 설정을 변경하고 나선 모드를 자동으로 활성화합니다\n"
 "아니오 - 이번에는 나선 모드 사용을 포기합니다"
 
+# AI Translated
+msgid "N/A"
+msgstr "해당 없음"
+
 msgid "Printing"
 msgstr "출력 중"
 
@@ -5361,14 +5369,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "값 %s이 범위를 벗어났습니다. 유효한 범위는 %d에서 %d까지입니다."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%% 또는 %s %s입니까?\n"
-"%s%%에 대해 예,\n"
-"%s %s에 대해 아니요."
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%% 또는 %s %s입니까?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5390,30 +5395,22 @@ msgstr "잘못된 패턴입니다. N, N#K 또는 항목당 선택적 #K가 있
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "잘못된 형식입니다. 필요한 벡터 형식: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "해당 없음"
-
 # AI Translated
 msgid "System agents"
 msgstr "시스템 에이전트"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "선택된 플러그인 없음"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "플러그인 추가"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "플러그인 선택"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "플러그인 제거"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "선택된 플러그인 없음"
+
 # AI Translated
 msgid "Configure"
 msgstr "구성"
@@ -5670,14 +5667,20 @@ msgstr "최적으로 설정"
 msgid "Regroup filament"
 msgstr "필라멘트 재그룹핑"
 
-msgid "up to"
-msgstr "까지"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "%1% mm까지"
 
-msgid "above"
-msgstr "위에"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "%1% mm 이상"
 
-msgid "from"
-msgstr "부터"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "%1% mm에서 %2% mm까지"
 
 msgid "Usage"
 msgstr "사용량"
@@ -6041,7 +6044,7 @@ msgstr "용량:"
 msgid "Size:"
 msgstr "크기:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "레이어 %d, Z = %.2lf mm에서 Gcode 경로 충돌이 발견되었습니다. 충돌하는 객체를 더 멀리 분리하세요 (%s <-> %s)."
 
@@ -6350,6 +6353,14 @@ msgstr "프로젝트 다른 이름으로 저장"
 msgid "Save current project as"
 msgstr "현재 프로젝트 다른 이름으로 저장"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MF 게시"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "선택한 설정이 포함된 3MF 파일을 내보냅니다"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "3MF/STL/STEP/SVG/OBJ/AMF 가져오기"
 
@@ -7621,6 +7632,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "하부"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "이 설정은 플러그인 기능 유형을 지정하지 않습니다."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "이 설정은 인식할 수 없는 플러그인 기능 유형을 지정합니다: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "플러그인 선택"
@@ -8195,6 +8214,14 @@ msgstr "이러한 사전 설정 내의 Gcode가 기계 손상을 방지할 수 
 msgid "Customized Preset"
 msgstr "사용자 정의 프리셋"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "일부 게시된 설정을 적용할 수 없습니다:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "일부 필라멘트 슬롯이 변경되었습니다:"
+
 # AI Translated
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "STEP 파일 내부의 구성 요소 이름이 UTF-8 형식이 아닙니다!"
@@ -8622,6 +8649,21 @@ msgstr "슬라이스 파일을 다음으로 저장:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "%s 파일이 프린터의 저장 공간으로 전송되었으며 프린터에서 볼 수 있습니다."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MF 파일을 다음 이름으로 게시:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"게시할 3MF 파일을 내보내지 못했습니다.\n"
+"폴더가 온라인에 있는지, 또는 다른 프로그램이 해당 파일을 열어 두었는지 확인하세요."
+
+msgid "Publish"
+msgstr "게시"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "노즐 유형이 설정되지 않았습니다. 노즐을 설정하고 다시 시도하세요."
 
@@ -8837,9 +8879,6 @@ msgstr "계속하시겠습니까?"
 msgid "Language selection"
 msgstr "언어 선택"
 
-msgid "Switching application language while some presets are modified."
-msgstr "일부 사전 설정이 수정되는 동안 응용 프로그램 언어를 전환합니다."
-
 msgid "Asia-Pacific"
 msgstr "아시아 태평양"
 
@@ -8953,6 +8992,9 @@ msgstr "현재 인스턴스 경로: "
 msgid "General"
 msgstr "일반"
 
+msgid "Language"
+msgstr "언어"
+
 msgid "Metric"
 msgstr "미터법"
 
@@ -9448,9 +9490,6 @@ msgstr "슬라이스된 미리보기에서 레이어 슬라이더를 움직일 
 msgid "Dimmed layer brightness"
 msgstr "어둡게 표시된 레이어의 밝기"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9865,9 +9904,6 @@ msgstr "모델 게시 웹 페이지로 이동"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "참고: 준비하는 데 몇 분 정도 걸릴 수 있습니다. 조금만 기다려 주십시오."
 
-msgid "Publish"
-msgstr "게시"
-
 msgid "Publish was canceled"
 msgstr "게시가 취소되었습니다"
 
@@ -9884,6 +9920,81 @@ msgstr "데이터 업로드 중"
 msgid "Jump to webpage"
 msgstr "웹 페이지로 이동"
 
+# AI Translated
+msgid "Material"
+msgstr "재료"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "혼합 필라멘트"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "일부 혼합 필라멘트는 게시되지 않을 필라멘트에 의존합니다:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "필라멘트 %d (혼합)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1%에는 %2%이(가) 필요하지만 활성화되어 있지 않습니다."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1%에는 %2%이(가) 필요하지만 해당 재료는 게시되지 않습니다."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "혼합 필라멘트를 게시하려면 사용하는 모든 필라멘트를 활성화하고 전체 게시를 선택하거나 유형 요구 사항을 충족하세요."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "그래도 게시"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MF 게시..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "3MF 파일에 게시할 설정을 선택하세요"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF 게시 위키"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF 게시 비디오 가이드"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "혼합 필라멘트 - 위에서 \"활성화\"를 선택하면 전체가 게시됩니다"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "이 혼합 필라멘트를 게시하고 구성 필라멘트를 활성화 + 전체 게시합니다"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "이 필라멘트 슬롯을 3MF 파일에 게시합니다"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "전체 게시"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "이 슬롯의 필라멘트 전체를 3MF 파일에 포함합니다"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "선택되지 않은 항목 필터링"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "%s을(를) 다음으로 저장"
@@ -9902,6 +10013,10 @@ msgstr "상위 사전 설정에서 상속한 모든 값을 이 사전 설정으
 msgid "Detach from parent"
 msgstr "상위 항목에서 분리"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "상위 항목 없이 저장"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "독립 사전 설정"
@@ -10616,10 +10731,18 @@ msgstr "뭉침 감지에는 프라임 타워가 필요합니다. 프라임 타
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "정밀 Z 높이와 프라임 타워를 함께 활성화하면 슬라이싱 오류가 발생할 수 있습니다. 그래도 정밀 Z 높이를 활성화하시겠습니까?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "스무드 타임랩스는 모든 레이어에 프라임 타워가 필요하므로 \"희소 레이어 없음\"과 함께 사용할 수 없습니다. \"희소 레이어 없음\"이 해제되었습니다."
+
 # AI Translated
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "유연 모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모델에는 결함이 있을 수 있습니다. 프라임 타워를 활성화하시겠습니까?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"희소 레이어 없음\"은 모든 레이어에 프라임 타워가 필요한 스무드 타임랩스와 함께 사용할 수 없습니다. 타임랩스가 기존 모드로 전환되었습니다."
+
 msgid "Still print by object?"
 msgstr "아직도 객체별로 출력하시나요?"
 
@@ -10996,10 +11119,6 @@ msgstr "호환 프로세스 사전설정"
 msgid "Printable space"
 msgstr "출력 가능 공간"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "프린터 에이전트"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다. 사용 가능한 에이전트는 시작 시 등록됩니다."
@@ -11424,14 +11543,6 @@ msgstr "익스트루더 수"
 msgid "Capabilities"
 msgstr "성능"
 
-# AI Translated
-msgid "Left: "
-msgstr "왼쪽: "
-
-# AI Translated
-msgid "Right: "
-msgstr "오른쪽: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "모든 사전 설정 표시(호환되지 않는 설정 포함)"
 
@@ -12294,15 +12405,22 @@ msgstr "수리 취소됨"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "파일 %1%를 %2%으로 복사 실패: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "새 제조사 프로파일 다운로드 중: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "구성 패키지: %1%이(가) %2%(으)로 업데이트되었습니다"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "제조사 프로파일을 다운로드하지 못했습니다: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "구성 업데이트 전에 저장되지 않은 변경 사항을 확인해야 합니다."
 
-msgid "Configuration package: "
-msgstr "구성 패키지: "
-
-msgid " updated to "
-msgstr " 로 업데이트되었습니다 "
-
 msgid "Open G-code file:"
 msgstr "Gcode 파일 열기:"
 
@@ -12367,11 +12485,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "인풋 셰이핑은 Klipper, RepRapFirmware, Marlin 2에서만 지원됩니다."
 
-msgid "Grouping error: "
-msgstr "그룹화 오류입니다:"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "그룹화 오류: %1%은(는) 왼쪽 노즐에 배치할 수 없습니다"
 
-msgid " can not be placed in the "
-msgstr " 에 배치할 수 없습니다"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "그룹화 오류: %1%은(는) 오른쪽 노즐에 배치할 수 없습니다"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12486,6 +12608,10 @@ msgstr "%1% 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% 이(가) 너무 높아서 충돌이 출력 시 발생할 수 있습니다."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "모델과 프라임 타워의 상대 위치가 \"희소 레이어 없음\" 기능의 요구 사항을 충족하지 않습니다. 상대 위치를 조정하거나 모델 높이를 낮추거나 \"희소 레이어 없음\"을 해제하세요."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다."
 
@@ -12860,6 +12986,10 @@ msgstr "G-code 대신 3MF 사용"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "프린터가 출력 작업으로 3MF 파일을 허용하는 경우 이 옵션을 활성화하십시오. 활성화하면 Orca Slicer가 슬라이스된 파일을 일반 .gcode 파일 대신 .gcode.3mf로 전송합니다."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "프린터 에이전트"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다."
@@ -13959,6 +14089,10 @@ msgstr "정렬된 직선"
 msgid "Concentric"
 msgstr "동심"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "나선형 인셋"
+
 msgid "Hilbert Curve"
 msgstr "힐베르트 곡선"
 
@@ -14052,13 +14186,13 @@ msgstr "상단 표면 채우기 순서"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 상단 표면을 채우는 방향입니다.\n"
-"바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작하여 중앙의 좁은 곡선에서 끝납니다.\n"
-"기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다."
+"중심에서 시작하는 패턴(동심, 나선형 인셋, 아르키메데스 코드, 팔각 나선형)을 사용할 때 상단 표면을 채우는 방향입니다.\n"
+"바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작해 중앙의 좁은 곡선으로 끝납니다.\n"
+"기본값은 최단 경로 순서를 사용하며, 어느 방향으로든 진행될 수 있습니다."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -14066,13 +14200,13 @@ msgstr "하단 표면 채우기 순서"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 하단 표면을 채우는 방향입니다.\n"
-"안쪽은 각 표면을 더 넓은 바깥쪽 곡선에서 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 빌드 플레이트에서 초기 레이어 접착력이 향상됩니다. 바깥쪽은 중앙에서 시작하여 남는 재료를 가장자리로 밀어냅니다.\n"
-"기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다."
+"중심에서 시작하는 패턴(동심, 나선형 인셋, 아르키메데스 코드, 팔각 나선형)을 사용할 때 하단 표면을 채우는 방향입니다.\n"
+"안쪽은 각 표면을 더 넓은 바깥쪽 곡선부터 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 베드에서 초기 레이어 안착이 개선됩니다. 바깥쪽은 중앙에서 시작해 남는 재료를 가장자리로 밀어냅니다.\n"
+"기본값은 최단 경로 순서를 사용하며, 어느 방향으로든 진행될 수 있습니다."
 
 msgid "Internal solid infill pattern"
 msgstr "꽉찬 내부 채우기 패턴"
@@ -14176,6 +14310,14 @@ msgstr "시계 반대 방향"
 msgid "Clockwise"
 msgstr "시계방향"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "로드까지의 거리"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "노즐 끝에서 로드의 먼 쪽 가장자리까지의 수평 거리입니다. 객체별 출력에서 충돌을 피하는 데 사용됩니다."
+
 msgid "Height to rod"
 msgstr "레일까지의 높이"
 
@@ -16428,6 +16570,20 @@ msgstr "오버행 벽 감지"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "선 너비에 비례하여 오버행 백분율을 감지하고 다른 속도를 사용하여 출력합니다. 100%% 오버행의 경우 브릿지 속도가 사용됩니다."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "지지되지 않는 벽을 마지막에 출력"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"완전히 공중에 떠 있는 벽 루프는 이를 받쳐 줄 것이 생긴 뒤에 출력됩니다.\n"
+"벽 순서와 관계없이 같은 섬의 다른 벽들보다 나중에, 가장 안쪽부터 압출됩니다.\n"
+"이 레이어의 브릿지만이 고정할 수 있는 루프는 해당 브릿지가 출력될 때까지 기다리고, 지지되는 벽을 따라 지나가는 루프는 이를 고정점으로 필요로 하는 채우기보다 앞선 자리를 유지합니다."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "외벽"
@@ -16879,6 +17035,39 @@ msgstr "루프에서 노즐 청소"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "폐쇄 루프 압출에서 재봉선의 가시성을 최소화하기 위해 압출기가 루프를 떠나기 전에 안쪽으로의 작은 이동이 실행됩니다."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "안쪽으로 노즐 청소"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"구멍 경계를 포함한 외벽에만 적용됩니다. 노즐 청소 중 뜨거운 노즐을 이미 출력된 내벽 쪽으로 이동시켜, 갓 출력된 플라스틱의 재가열과 재봉선 자국을 줄입니다.\n"
+"\n"
+"청소 자국이 더 잘 보이는 0.1 mm 미만의 레이어 높이에서 특히 유용합니다.\n"
+"\n"
+"인접한 내벽이 아직 출력되지 않았거나(벽이 하나뿐인 영역 또는 외벽/내벽 순서), 좁은 모서리나 재봉선 간격 등에서 지지되는 안쪽 경로를 찾을 수 없는 경우에는 일반 노즐 청소를 사용합니다."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "안쪽 노즐 청소 거리"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"노즐 청소 경로를 외곽 둘레에서 밀어내는 거리로, 밀리미터 또는 실제 외벽 압출 너비에 대한 백분율로 지정합니다.\n"
+"\n"
+"예를 들어 50%는 경로를 외벽 너비의 절반만큼 이동시킵니다. 실제 오프셋은 실제 외벽 너비와 인접한 벽까지의 여유 간격 모두에 의해 제한되므로, 100%를 넘는 값이나 그에 상응하는 절대 거리를 지정해도 추가 효과가 없습니다. 오프셋을 끄려면 0으로 설정하세요."
+
 msgid "Wipe before external loop"
 msgstr "외부 루프 전 닦아내기"
 
@@ -17149,8 +17338,9 @@ msgstr "출력 온도에 도달할 때까지 기다리지 않고 새 툴을 집
 msgid "No sparse layers (beta)"
 msgstr "희소 레이어 없음(베타)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. 출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "활성화하면 툴체인지가 없는 레이어에서는 프라임 타워가 출력되지 않습니다. 툴체인지가 있는 레이어에서는 압출기가 아래로 이동해 프라임 타워를 출력하므로, 타워가 모델보다 아래에 놓이고 툴헤드가 거기까지 내려가야 합니다. 이미 출력된 객체와 충돌하게 되는 배치는 거부됩니다. 모든 레이어에 타워가 필요한 스무드 타임랩스나 노즐 클럼핑 감지에서는 효과가 없습니다."
 
 msgid "Prime all printing extruders"
 msgstr "모든 활성화된 압출기 프라이밍"
@@ -17176,6 +17366,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "순환"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "순환 순서"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"순환 툴체인지 순서에서 사용하는 사용자 지정 필라멘트 순서로, 필라멘트 번호를 쉼표로 구분해 지정합니다(예: \"3,2,1,4\").\n"
+"각 레이어는 이 순서에 따라 필라멘트를 출력하며, 목록에 없는 필라멘트는 오름차순으로 마지막에 출력됩니다.\n"
+"비워 두면 필라멘트를 오름차순으로 순환합니다."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "초기 레이어에도 순환 순서 적용"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"순환 툴체인지 순서를 초기 레이어에도 적용합니다.\n"
+"기본적으로 꺼져 있는데, 초기 레이어는 대신 베드 안착이 가장 잘 되도록 정렬되기 때문입니다. 초기 레이어의 작고 약한 형상을 출력하는 필라멘트를 마지막에 출력하면, 이어지는 툴체인지와 이동 동작이 약하게 고정된 부분을 떨어뜨릴 가능성이 줄어듭니다. 이 초기 레이어 순서는 초기 레이어용 사용자 지정 필라멘트 순서가 설정되어 있으면 그것도 따릅니다. 순환 순서의 이점(툴체인지가 늘어나 각 레이어의 냉각 시간이 길어지는 것)은 안착을 위해 느리고 뜨겁게 출력되는 초기 레이어에는 해당하지 않습니다.\n"
+"안착 최적화를 포기하더라도 초기 레이어를 포함한 모든 레이어에서 정확히 같은 툴 순서가 필요한 경우에만 활성화하세요."
+
 msgid "Slice gap closing radius"
 msgstr "슬라이스 간격 폐쇄 반경"
 
@@ -17185,9 +17403,6 @@ msgstr "간격 폐쇄 반경의 2배보다 작은 균열은 삼각형 메시 슬
 msgid "Slicing Mode"
 msgstr "슬라이싱 모드"
 
-msgid "Other"
-msgstr "기타"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "3DLabPrint 비행기 모델에는 \"짝수-홀수\"를 사용하세요. \"구멍 닫기\"를 사용하여 모델의 모든 구멍을 닫습니다."
 
@@ -18209,6 +18424,14 @@ msgstr "확인 안 함"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Gcode 경로 충돌 검사와 같은 유효성 검사를 실행하지 마십시오."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "엄격 모드"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "서포트가 꺼져 있는데 서포트가 필요한 모델처럼, 평소에는 로그에만 남는 치명적이지 않은 경고가 슬라이싱 중에 발생하면 0이 아닌 코드로 종료합니다. 미묘하게 잘못된 슬라이싱 결과를 절대 내보내면 안 되는 CI나 스크립트 파이프라인에서 사용하세요. 그러한 경고는 Linux에서만 기록되는 result.json의 `warnings` 배열에도 고정된 분류와 함께 나열됩니다. 서포트 검사를 건너뛰는 --no-check와 함께 사용할 수 없습니다."
+
 msgid "Normative check"
 msgstr "표준 검사"
 
@@ -18221,11 +18444,28 @@ msgstr "모델 정보 출력"
 msgid "This outputs the model’s information."
 msgstr "모델 정보를 출력합니다."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "메시 검사 (JSON을 stdout으로)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "불러온 각 객체의 JSON 요약을 stdout으로 출력한 뒤 종료합니다: 경계 상자와 올려놓을 수 있는 볼록 껍질 면, 그리고 각 면의 법선, 면적, 중심이 포함됩니다. --ground-* 옵션이 선택하는 대상이 바로 이 면들입니다. --info의 기계 판독용 대안입니다."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "페인팅 검사 (JSON을 stdout으로)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "불러온 모델에 이미 저장된 모든 페인팅 레이어(서포트, 재봉선, MMU 색상, 퍼지 스킨)에 대해 상태별 면 개수, 표면적, 메시 기준 경계 상자를 구조화된 JSON으로 출력한 뒤 종료합니다. GUI에서 페인팅 도구를 여는 작업의 기계 판독용 대안입니다."
+
 msgid "Export Settings"
 msgstr "설정 내보내기"
 
-msgid "This exports settings to a file."
-msgstr "설정을 파일로 내보내기."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "설정을 파일로 내보냅니다. -를 사용하면 stdout으로 출력합니다."
 
 msgid "Send progress to pipe"
 msgstr "진행 상황을 파이프로 보내기"
@@ -18281,6 +18521,30 @@ msgstr "Y를 중심으로 회전"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Y축을 중심으로 한 회전 각도입니다."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "가장 큰 면으로 안착"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "각 객체를 볼록 껍질의 가장 큰 면으로 눕히고 베드로 떨어뜨립니다. 크기가 같은 면이 여럿이면 이미 아래를 향한 면이 유지됩니다. 올려놓을 만큼 큰 면이 없는 객체는 그대로 둡니다. 변환은 명령줄 순서대로 실행되므로 이 옵션보다 앞에 지정한 회전은 유지됩니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "법선 기준 면으로 안착"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "각 객체를 바깥쪽 법선이 방향 NX,NY,NZ에 가장 가까운 볼록 껍질 면으로 눕히고 베드로 떨어뜨립니다. 방향은 객체 좌표계 기준이며, 이 좌표계는 이 옵션보다 앞에 지정한 회전을 포함하고, 입력 파일이 객체를 회전시키지 않는 한 플레이트 축과 일치합니다. 예를 들어 1,0,0은 객체를 +X 쪽으로 세웁니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "지정 지점의 면으로 안착"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "각 객체를 점 X,Y,Z를 포함하는 볼록 껍질 면으로 눕히고 베드로 떨어뜨립니다. 점은 객체 좌표계 기준이며, 이 좌표계는 이 옵션보다 앞에 지정한 회전을 포함합니다. --inspect-mesh는 이 좌표계로 면 중심을 알려줍니다. 그러한 면이 없는 객체는 그대로 두며, 어떤 객체에도 해당 면이 없으면 실행이 실패합니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다."
+
 msgid "Scale the model by a float factor."
 msgstr "부동 소수점 계수로 모델 크기 조정"
 
@@ -21536,6 +21800,18 @@ msgstr "이 작업은 취소할 수 없습니다. 계속하시겠습니까?"
 msgid "Skipping objects."
 msgstr "물체 건너뛰기"
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "재료 비율"
+
+# AI Translated
+msgid "Model Height"
+msgstr "모델 높이"
+
+# AI Translated
+msgid "Ratio"
+msgstr "비율"
+
 msgid "Select Filament"
 msgstr "필라멘트 선택"
 
@@ -21837,12 +22113,14 @@ msgid "Drying-Dehumidifying"
 msgstr "건조-제습"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " 최대 건조 온도는 "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s의 최대 건조 온도는 %d°C입니다."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " 최소 건조 온도는 "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s의 최소 건조 온도는 %d°C입니다."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22289,6 +22567,97 @@ msgstr ""
 "뒤틀림 방지\n"
 "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Other"
+#~ msgstr "기타"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "왼쪽: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "오른쪽: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "최대 온도는 다음 값을 초과할 수 없습니다 "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "최소 온도는 다음 값보다 낮아서는 안 됩니다 "
+
+#~ msgid "up to"
+#~ msgstr "까지"
+
+#~ msgid "above"
+#~ msgstr "위에"
+
+#~ msgid "from"
+#~ msgstr "부터"
+
+#~ msgid "Configuration package: "
+#~ msgstr "구성 패키지: "
+
+#~ msgid " updated to "
+#~ msgstr " 로 업데이트되었습니다 "
+
+#~ msgid "Grouping error: "
+#~ msgstr "그룹화 오류입니다:"
+
+#~ msgid " can not be placed in the "
+#~ msgstr " 에 배치할 수 없습니다"
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " 최대 건조 온도는 "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " 최소 건조 온도는 "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "필요"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "활성화되지 않음"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "재료 미게시"
+
+#~ msgid "Select the language"
+#~ msgstr "언어 선택"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "플러그인 선택"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 상단 표면을 채우는 방향입니다.\n"
+#~ "바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작하여 중앙의 좁은 곡선에서 끝납니다.\n"
+#~ "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 하단 표면을 채우는 방향입니다.\n"
+#~ "안쪽은 각 표면을 더 넓은 바깥쪽 곡선에서 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 빌드 플레이트에서 초기 레이어 접착력이 향상됩니다. 바깥쪽은 중앙에서 시작하여 남는 재료를 가장자리로 밀어냅니다.\n"
+#~ "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. 출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "설정을 파일로 내보내기."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "네이티브 Wayland 실시간 보기에는 GStreamer GTK 비디오 싱크가 필요합니다. GStreamer용 gtksink 플러그인을 설치한 후 OrcaSlicer를 다시 시작하십시오."
diff --git a/localization/i18n/list.txt b/localization/i18n/list.txt
index e5801e3444..ae33c5fc85 100644
--- a/localization/i18n/list.txt
+++ b/localization/i18n/list.txt
@@ -136,6 +136,7 @@ src/slic3r/GUI/BackgroundSlicingProcess.cpp
 src/slic3r/GUI/BedShapeDialog.cpp
 src/slic3r/GUI/BedShapeDialog.hpp
 src/slic3r/GUI/ConfigManipulation.cpp
+src/slic3r/GUI/ConfigValueFormatter.cpp
 src/slic3r/GUI/DeviceManager.cpp
 src/slic3r/GUI/DeviceErrorDialog.cpp
 src/slic3r/GUI/ExtraRenderers.cpp
@@ -175,6 +176,7 @@ src/slic3r/GUI/ProgressStatusBar.cpp
 src/slic3r/GUI/PlateSettingsDialog.cpp
 src/slic3r/GUI/PrivacyUpdateDialog.cpp
 src/slic3r/GUI/PublishDialog.cpp
+src/slic3r/GUI/PublishSettingsDialog.cpp
 src/slic3r/GUI/SavePresetDialog.cpp
 src/slic3r/GUI/Search.cpp
 src/slic3r/GUI/Selection.cpp
diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po
index b3458ec0e4..7798105df7 100644
--- a/localization/i18n/lt/OrcaSlicer_lt.po
+++ b/localization/i18n/lt/OrcaSlicer_lt.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-07-02 14:13+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -2449,15 +2449,6 @@ msgstr "Yra prieinamas atnaujinimas. Atidarykite profilių paketo dialogo langą
 msgid "%s has been removed."
 msgstr "%s buvo pašalintas."
 
-msgid "Switching application language"
-msgstr "Perjungiama programos kalba"
-
-msgid "Select the language"
-msgstr "Pasirinkite kalbą"
-
-msgid "Language"
-msgstr "Kalba"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3703,11 +3694,15 @@ msgstr "Ištraukite dabartinę giją ties Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Perjunkite takelį ties Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Maksimali temperatūra negali viršyti "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Maksimali temperatūra negali viršyti %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Minimali temperatūra neturi būti mažesnė nei "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Minimali temperatūra neturi būti mažesnė nei %d"
 
 msgid "Type to filter..."
 msgstr "Įveskite tekstą filtravimui..."
@@ -4589,6 +4584,15 @@ msgstr ""
 "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gal draudžiama įrašinėti į SD kortelę?\n"
 "Klaidos pranešimas: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Nepavyko nukopijuoti laikinojo G kodo į išvesties G kodą.\n"
+"Klaidos pranešimas: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gali kilti problemų dėl tikslinio įrenginio. Bandykite eksportuoti dar kartą arba naudokite kitą įrenginį. Sugadintas išvesties G-kodas yra %1%.tmp."
@@ -4893,6 +4897,9 @@ msgstr ""
 "Taip – pakeisti šiuos nustatymus ir automatiškai įjungti spiralinį režimą\n"
 "Ne –  nenaudoti spiralinio režimo"
 
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Spausdinimas"
 
@@ -5323,14 +5330,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Reikšmė %s yra už ribų. Galimas diapazonas yra nuo %d iki %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Ar tai %s%% ar %s %s?\n"
-"TAIP %s%%, \n"
-"NE %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Ar tai %s%% ar %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5352,29 +5356,22 @@ msgstr "Neteisingas šablonas. Naudokite N, N#K arba kableliais atskirtą sąra
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Netinkamas formatas. Tinkamas vektorinis formatas: \"%1%\""
 
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "Sisteminiai agentai"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Nepasirinktas joks papildinys"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Pridėti papildinį"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Pasirinkti papildinį"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Pašalinti papildinį"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Nepasirinktas joks papildinys"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfigūruoti"
@@ -5630,14 +5627,20 @@ msgstr "Nustatyti į optimalų"
 msgid "Regroup filament"
 msgstr "Pergrupuoti gijas"
 
-msgid "up to"
-msgstr "iki"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "iki %1% mm"
 
-msgid "above"
-msgstr "virš"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "virš %1% mm"
 
-msgid "from"
-msgstr "nuo"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "nuo %1% iki %2% mm"
 
 msgid "Usage"
 msgstr "Naudojimas"
@@ -6000,7 +6003,7 @@ msgstr "Tūris:"
 msgid "Size:"
 msgstr "Dydis:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Rasta G-kodo trajektorijų konfliktų %d sluoksnyje, Z = %.2lfmm. Prašome labiau atskirti konfliktuojančius objektus (%s <-> %s)."
 
@@ -6312,6 +6315,14 @@ msgstr "Įrašyti projektą kaip"
 msgid "Save current project as"
 msgstr "Įrašyti dabartinį projektą kaip"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Talpinti 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Eksportuoti 3MF failą su įterptais pasirinktais parametrais"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importuoti 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7585,6 +7596,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Apatinis"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Šis parametras nenurodo papildinio gebos tipo."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Šis parametras nurodo neatpažintą papildinio gebos tipą: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Papildinio pasirinkimas"
@@ -8153,6 +8172,14 @@ msgstr "Patvirtinkite, kad šiuose profiliuose esantis G-kodas yra saugus, kad i
 msgid "Customized Preset"
 msgstr "Pritaikytas profilis"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Kai kurių patalpintų parametrų pritaikyti nepavyko:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Kai kurie gijų lizdai buvo pakeisti:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Komponentų pavadinimai STEP faile nėra UTF-8 formato!"
 
@@ -8564,6 +8591,21 @@ msgstr "Išsaugoti susluoksniuotą failą kaip:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Failas %s išsiųstas į spausdintuvo laikmeną ir gali būti peržiūrimas spausdintuve."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Talpinti 3MF failą kaip:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Nepavyko eksportuoti patalpinto 3MF failo.\n"
+"Patikrinkite, ar aplankas pasiekiamas internete ir ar failo neturi atvėrusios kitos programos."
+
+msgid "Publish"
+msgstr "Talpinti"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Purkštuko tipas nenustatytas. Nustatykite purkštuką ir bandykite dar kartą."
 
@@ -8774,9 +8816,6 @@ msgstr "Ar norite tęsti?"
 msgid "Language selection"
 msgstr "Kalbos pasirinkimas"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Keičiama programos kalba, kai yra pakeistų profilių."
-
 msgid "Asia-Pacific"
 msgstr "Azija-Ramusis vandenynas"
 
@@ -8881,6 +8920,9 @@ msgstr "Dabartinės versijos kelias: "
 msgid "General"
 msgstr "Bendras"
 
+msgid "Language"
+msgstr "Kalba"
+
 msgid "Metric"
 msgstr "Metrinė"
 
@@ -9309,9 +9351,6 @@ msgstr "Slenkant sluoksnių slankiklį pjaustytoje peržiūroje, atvaizduoti že
 msgid "Dimmed layer brightness"
 msgstr "Pritemdytų sluoksnių ryškumas"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9693,9 +9732,6 @@ msgstr "Pereiti į modelio talpinimo interneto puslapį"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Pastaba: paruošimas gali užtrukti kelias minutes. Būkite kantrūs."
 
-msgid "Publish"
-msgstr "Talpinti"
-
 msgid "Publish was canceled"
 msgstr "Publikavimas buvo atšauktas"
 
@@ -9711,6 +9747,81 @@ msgstr "Įkeliami duomenys"
 msgid "Jump to webpage"
 msgstr "Pereiti į interneto puslapį"
 
+# AI Translated
+msgid "Material"
+msgstr "Medžiaga"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Mišri gija"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Kai kurios mišrios gijos priklauso nuo gijų, kurios nebus patalpintos:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Gija %d (mišri)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% reikalauja %2%, kuri nėra įjungta."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% reikalauja %2%, kurios medžiaga nebus paskelbta."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Norėdami patalpinti mišrią giją, įjunkite kiekvieną jos naudojamą giją ir pasirinkite Pilną talpinimą arba įvykdykite jos Tipo reikalavimą."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Vis tiek talpinti"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Talpinti 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Pasirinkite, kuriuos parametrus talpinti 3MF faile"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF talpinimo wiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF talpinimo vaizdo vadovas"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Mišri gija - talpinama kaip visuma, kai viršuje pasirinkta \"Įjungti\""
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Talpinti šią mišrią giją ir įjungti + pilnai patalpinti jos sudedamąsias gijas"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Talpinti šį gijos lizdą 3MF faile"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Pilnas talpinimas"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Įterpti visą šio lizdo giją į 3MF failą"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtruoti nepasirinktus"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Išsaugoti %s kaip"
@@ -9728,6 +9839,10 @@ msgstr "Nukopijuoja į šį profilį visas iš pirminio profilio paveldėtas rei
 msgid "Detach from parent"
 msgstr "Atskirti nuo tėvinio profilio"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Išsaugoti be tėvinio profilio"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Savarankiškas profilis"
@@ -10430,9 +10545,17 @@ msgstr "Norint aptikti gumbų susidarymą, reikalingas valymo bokštas. Be valym
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Įjungus ir tikslų Z aukštį, ir valymo bokštą, gali kilti sluoksniavimo klaidų. Ar vis tiek norite įjungti tikslų Z aukštį?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Sklandžiam pakadriniam filmavimui (timelapse) reikia valymo bokšto kiekviename sluoksnyje, o tai nesuderinama su parinktimi \"Nėra retų sluoksnių\". Parinktis \"Nėra retų sluoksnių\" buvo išjungta."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar norite įjungti valymo bokštą?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "Parinktis \"Nėra retų sluoksnių\" nesuderinama su sklandžiu pakadriniu filmavimu (timelapse), kuriam reikia valymo bokšto kiekviename sluoksnyje. Pakadrinis filmavimas perjungtas į tradicinį režimą."
+
 msgid "Still print by object?"
 msgstr "Vis dar spausdinti pagal objektą?"
 
@@ -10805,9 +10928,6 @@ msgstr "Suderinami apdorojimo profiliai"
 msgid "Printable space"
 msgstr "Erdvė spausdinimui"
 
-msgid "Printer Agent"
-msgstr "Spausdintuvo agentas"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti. Prieinami agentai užregistruojami paleidimo metu."
 
@@ -11210,12 +11330,6 @@ msgstr "Ekstruderių skaičius"
 msgid "Capabilities"
 msgstr "Galimybės"
 
-msgid "Left: "
-msgstr "Kairė:"
-
-msgid "Right: "
-msgstr "Dešinė:"
-
 msgid "Show all presets (including incompatible)"
 msgstr "Rodyti visus profilius (įskaitant nesuderinamus)"
 
@@ -12054,15 +12168,22 @@ msgstr "Taisymas atšauktas"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Failo %1% kopijavimas į %2% nepavyko: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Atsisiunčiami nauji gamintojų profiliai: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Konfigūracijos paketas: %1% atnaujintas į %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Nepavyko atsisiųsti gamintojų profilių: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Prieš atnaujinant konfigūraciją reikia patikrinti neišsaugotus pakeitimus."
 
-msgid "Configuration package: "
-msgstr "Konfigūracijos paketas: "
-
-msgid " updated to "
-msgstr " atnaujintas į "
-
 msgid "Open G-code file:"
 msgstr "Atidaryti G-kodo failą:"
 
@@ -12122,11 +12243,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "„Input shaping“ funkcija palaikoma tik „Klipper“, „RepRapFirmware“ ir „Marlin 2“ programinėje aparatinėje įrangoje"
 
-msgid "Grouping error: "
-msgstr "Grupavimo klaida: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Grupavimo klaida: %1% negalima įdėti į kairįjį purkštuką"
 
-msgid " can not be placed in the "
-msgstr "negali būti įkeltas į "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Grupavimo klaida: %1% negalima įdėti į dešinįjį purkštuką"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12240,6 +12365,10 @@ msgstr "%1% yra per arti kitų, todėl gali įvykti susidūrimas."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% yra per aukštas, todėl įvyks susidūrimai."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Modelio ir valymo bokšto tarpusavio padėtis neatitinka funkcijos \"Nėra retų sluoksnių\" reikalavimų. Pakoreguokite jų tarpusavio padėtį, sumažinkite modelio aukštį arba išjunkite parinktį \"Nėra retų sluoksnių\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " yra per arti uždraustosios zonos, spausdinant gali įvykti susidūrimų."
 
@@ -12585,6 +12714,9 @@ msgstr "Vietoj G-kodo naudoti 3MF"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Įjunkite, jei spausdintuvas spausdinimo užduotims priima 3MF failus. Kai įjungta, „Orca Slicer“ sugeneruotą failą siunčia kaip „.gcode.3mf“, o ne kaip paprastą „.gcode“ failą."
 
+msgid "Printer Agent"
+msgstr "Spausdintuvo agentas"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti."
 
@@ -13629,6 +13761,10 @@ msgstr "Sulygiuotas tiesiaeigis"
 msgid "Concentric"
 msgstr "Koncentrinis"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spiralinis poslinkis"
+
 msgid "Hilbert Curve"
 msgstr "Hilberto kreivė"
 
@@ -13720,13 +13856,13 @@ msgstr "Viršutinio paviršiaus užpildymo tvarka"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Kryptis, kuria užpildomi viršutiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n"
-"„Į išorę“ prasideda paviršiaus centre, todėl bet koks perteklinė medžiaga stumiama link krašto, kur ji mažiausiai matoma. „Į vidų“ prasideda nuo krašto ir baigiasi ankštomis kreivėmis centre.\n"
-"Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi."
+"Kryptis, kuria užpildomi viršutiniai paviršiai naudojant nuo centro einantį raštą (Koncentrinis, Spiralinis poslinkis, Archimedo akordai, Oktagramos spiralė).\n"
+"Į išorę pradeda nuo paviršiaus centro, todėl medžiagos perteklius stumiamas link krašto, kur jis mažiausiai matomas. Į vidų pradeda nuo krašto ir baigia ankštais posūkiais centre.\n"
+"Numatytasis naudoja trumpiausio kelio eiliškumą, kuris gali eiti bet kuria kryptimi."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13734,13 +13870,13 @@ msgstr "Apatinio paviršiaus užpildymo tvarka"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Kryptis, kuria užpildomi apatiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n"
-"„Į vidų“ pradeda kiekvieną paviršių platesnėmis išorinėmis kreivėmis, o tai pagerina pirmojo sluoksnio sukibimą ant pagrindų, kur ankštos kreivės centre gali nesilaikyti. „Į išorę“ prasideda centre, stumdama bet kokią perteklinę medžiagą link krašto.\n"
-"Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi."
+"Kryptis, kuria užpildomi apatiniai paviršiai naudojant nuo centro einantį raštą (Koncentrinis, Spiralinis poslinkis, Archimedo akordai, Oktagramos spiralė).\n"
+"Į vidų pradeda kiekvieną paviršių nuo platesnių išorinių posūkių, o tai pagerina pirmojo sluoksnio sukibimą su pagrindais, prie kurių ankšti posūkiai centre gali nepriliptų. Į išorę pradeda nuo centro ir stumia medžiagos perteklių link krašto.\n"
+"Numatytasis naudoja trumpiausio kelio eiliškumą, kuris gali eiti bet kuria kryptimi."
 
 msgid "Internal solid infill pattern"
 msgstr "Vidinio tvirto užpildo raštas"
@@ -13839,6 +13975,14 @@ msgstr "Prieš laikrodžio rodyklę"
 msgid "Clockwise"
 msgstr "Pagal laikrodžio rodyklę"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Atstumas iki strypo"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Horizontalus atstumas nuo purkštuko galiuko iki tolimesnio strypo krašto. Naudojamas susidūrimams išvengti spausdinant objektą po objekto."
+
 msgid "Height to rod"
 msgstr "Aukštis iki ašies (strypo)"
 
@@ -15994,6 +16138,20 @@ msgstr "Aptikti iškyšų sieneles"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Nustatykite iškyšos procentinę dalį, palyginti su linijos pločiu, ir naudokite skirtingą spausdinimo greitį. Jei iškyša 100%%, naudojamas tilto greitis."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Neatremtas sieneles spausdinti paskutines"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Sienelės kontūrai, esantys visiškai ore, spausdinami tik tada, kai juos yra kam palaikyti:\n"
+"jie išspaudžiami po kitų savo salos sienelių, pradedant nuo vidinės, nepriklausomai nuo sienelių eiliškumo.\n"
+"Kontūras, kurį gali įtvirtinti tik šio sluoksnio tiltai, laukia, kol tie tiltai bus atspausdinti, o kontūras, einantis šalia atremtos sienelės, išlaiko savo vietą prieš užpildą, kuriam jis reikalingas kaip įtvirtinimas."
+
 msgid "Outer walls"
 msgstr "Išorinės sienelės"
 
@@ -16427,6 +16585,39 @@ msgstr "Nuvalyti kilpas"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Siekiant sumažinti siūlės matomumą uždaroje ekstruzijos kilpoje, prieš ekstruderiui išeinant iš kilpos atliekamas nedidelis judesys į vidų."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Valymas į vidų"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Taikoma tik išorinėms sienelėms, įskaitant skylių kontūrus. Valymo metu karštą purkštuką patraukia link jau atspausdintų vidinių sienelių, kad sumažintų ką tik atspausdinto plastiko pakartotinį įkaitimą ir siūlės žymes.\n"
+"\n"
+"Ypač naudinga esant mažesniam nei 0,1 mm sluoksnio aukščiui, kai valymo žymės labiau matomos.\n"
+"\n"
+"Naudoja įprastą valymą, jei nėra jau atspausdintos gretimos vidinės sienelės (vienos sienelės sritys arba sienelių eiliškumas Išorinis / vidinis) arba jei nepavyksta rasti atremto kelio į vidų, pavyzdžiui, ankštuose kampuose ar siūlės tarpuose."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Valymo į vidų atstumas"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Atstumas, kuriuo valymo kelias pastumiamas nuo išorinio kontūro, nurodomas milimetrais arba procentais nuo faktinio išorinės sienelės išspaudimo pločio.\n"
+"\n"
+"Pavyzdžiui, 50% pastumia kelią per pusę išorinės sienelės pločio. Faktinį poslinkį riboja tiek tikrasis išorinės sienelės plotis, tiek laisvas tarpas iki gretimos sienelės, todėl didesnės nei 100% reikšmės ar joms lygiavertis absoliutus atstumas papildomo poveikio neturi. Nustatykite 0, kad poslinkis būtų išjungtas."
+
 msgid "Wipe before external loop"
 msgstr "Valymas prieš išorinį kontūrą"
 
@@ -16688,8 +16879,9 @@ msgstr "Paima naują įrankį nelaukdamas, kol jis pasieks spausdinimo temperat
 msgid "No sparse layers (beta)"
 msgstr "Nėra retų sluoksnių (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Jei įjungta, valymo bokštas nebus spausdinamas tuose sluoksniuose, kur įrankis nekeičiamas. Sluoksniuose, kur įrankis keičiamas, ekstruderis nusileis žemyn atspausdinti valymo bokšto dalies. Naudotojas pats atsako už tai, kad ekstruderis nesusidurtų su spaudiniu."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Jei įjungta, valymo bokštas nebus spausdinamas sluoksniuose be įrankio keitimų. Sluoksniuose su įrankio keitimu ekstruderis nusileis žemyn, kad atspausdintų valymo bokštą, todėl bokštas atsiduria žemiau modelio ir spausdinimo galvutė turi prie jo pasiekti žemyn. Išdėstymai, kuriuose tai susidurtų su jau atspausdintu objektu, atmetami. Neveikia esant sklandžiam pakadriniam filmavimui ar purkštuko apnašų aptikimui, nes jiems reikia bokšto kiekviename sluoksnyje."
 
 msgid "Prime all printing extruders"
 msgstr "Paruošti (prime) visus spausdinimo ekstruderius"
@@ -16715,6 +16907,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Ciklinė"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ciklinis eiliškumas"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Pasirinktinė gijų seka, naudojama cikliniame įrankių keitimo eiliškume, kaip kableliais atskirti gijų numeriai (pvz., \"3,2,1,4\").\n"
+"Kiekvienas sluoksnis spausdina savo gijas pagal šią seką; nenurodytos gijos spausdinamos paskutinės, didėjimo tvarka.\n"
+"Palikite tuščią, kad gijos būtų perrenkamos didėjimo tvarka."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Taikyti ciklinį eiliškumą pirmajam sluoksniui"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Taiko ciklinį įrankių keitimo eiliškumą ir pirmajam sluoksniui.\n"
+"Pagal numatytuosius nustatymus tai išjungta, nes pirmasis sluoksnis vietoj to išdėstomas siekiant geriausio sukibimo su pagrindu: gijos, kuriomis spausdinamos mažos, trapios pirmojo sluoksnio detalės, spausdinamos paskutinės, todėl tolesni įrankių keitimai ir tuščiosios eigos rečiau nuplėšia tas silpnai įtvirtintas dalis. Šis pirmojo sluoksnio eiliškumas taip pat atsižvelgia į pirmojo sluoksnio pasirinktinę gijų seką, jei ji nustatyta. Ciklinio eiliškumo nauda (papildomi įrankių keitimai kiekvienam sluoksniui suteikia daugiau laiko atvėsti) pirmajam sluoksniui negalioja, nes jis spausdinamas lėtai ir karštas dėl sukibimo.\n"
+"Įjunkite tai tik tuomet, jei jums reikia tiksliai tokios pačios įrankių sekos kiekviename sluoksnyje, įskaitant pirmąjį, aukojant šį sukibimo optimizavimą."
+
 msgid "Slice gap closing radius"
 msgstr "Sluoksniavimo tarpo uždarymo spindulys"
 
@@ -16724,9 +16944,6 @@ msgstr "Plyšiai, mažesni nei 2x tarpo uždarymo spindulys, užpildomi trikampi
 msgid "Slicing Mode"
 msgstr "Sluoksniavimo režimas"
 
-msgid "Other"
-msgstr "Kita"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "„3DLabPrint“ lėktuvų modeliams naudokite „Lyginis-nelyginis“. Naudokite „Uždaryti kiaurymes“, kad uždarytumėte visas modelio kiaurymes."
 
@@ -17729,6 +17946,14 @@ msgstr "Netikrinama"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Nevykdyti jokių tinkamumo patikrinimų, pavyzdžiui, G-kodo (G-code) trajektorijų konfliktų patikros."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Griežtas režimas"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Baigia darbą su ne nuliniu kodu, kai sluoksniuojant pateikiamas nekritinis įspėjimas, kuris kitu atveju būtų tik užregistruotas žurnale, pavyzdžiui, modelis, kuriam reikia atramų, kai atramos išjungtos. Naudokite tai CI arba scenarijais valdomuose procesuose, kurie niekada neturėtų pateikti nepastebimai sugadinto rezultato. Kiekvienas toks įspėjimas taip pat nurodomas su pastoviu klasės vardu result.json masyve `warnings`, kuris rašomas tik Linux sistemoje. Negalima derinti su --no-check, kuris praleidžia atramų patikrą."
+
 msgid "Normative check"
 msgstr "Normatyvinė patikra"
 
@@ -17741,11 +17966,28 @@ msgstr "Išvesti modelio informaciją"
 msgid "This outputs the model’s information."
 msgstr "Tai išveda modelio informaciją."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Tikrinti tinklelį (JSON į stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Išveda į stdout JSON santrauką apie kiekvieną įkeltą objektą ir baigia darbą: jo ribojančius gretasienius ir iškiliojo apvalkalo sienas, ant kurių jį galima paguldyti, su jų normalėmis, plotais ir centrais. Būtent iš šių sienų renkasi --ground-* parinktys. Kompiuterio skaitoma alternatyva --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Tikrinti piešinį (JSON į stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Išveda struktūrizuotą JSON santrauką apie kiekvieną piešimo sluoksnį (atramos, siūlė, MMU spalva, grublėtas paviršius), jau įrašytą į įkeltą modelį — sienelių skaičių, paviršiaus plotą ir ribojantį gretasienį tinklelio koordinatėmis kiekvienai būsenai — ir baigia darbą. Kompiuterio skaitoma alternatyva piešimo įrankių atvėrimui sąsajoje."
+
 msgid "Export Settings"
 msgstr "Eksportavimo nustatymai"
 
-msgid "This exports settings to a file."
-msgstr "Tai eksportuoja nustatymus į failą."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Tai eksportuoja parametrus į failą. Naudokite -, kad jie būtų įrašyti į stdout."
 
 msgid "Send progress to pipe"
 msgstr "Siųsti pažangą į kanalą"
@@ -17801,6 +18043,30 @@ msgstr "Pasukti aplink Y ašį"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Sukimosi kampas aplink Y ašį laipsniais."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Guldyti ant didžiausios sienos"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Paguldo kiekvieną objektą ant didžiausios jo iškiliojo apvalkalo sienos ir nuleidžia jį ant pagrindo. Iš vienodo dydžio sienų paliekama ta, kuri jau nukreipta žemyn. Objektai, neturintys pakankamai didelės sienos atsiremti, paliekami tokie, kokie yra. Transformacijos vykdomos komandų eilutės tvarka, todėl prieš šią parinktį nurodyti pasukimai išlaikomi. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Guldyti ant sienos pagal normalę"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Paguldo kiekvieną objektą ant tos iškiliojo apvalkalo sienos, kurios išorinė normalė arčiausia krypties NX,NY,NZ, ir nuleidžia jį ant pagrindo. Kryptis nurodoma objekto koordinatėmis, kurios apima prieš šią parinktį nurodytus pasukimus ir sutampa su pagrindo ašimis, nebent įvesties failas objektą pasuka. Pavyzdžiui, 1,0,0 pastato objektą ant jo +X pusės. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Guldyti ant sienos taške"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Paguldo kiekvieną objektą ant tos iškiliojo apvalkalo sienos, kurioje yra taškas X,Y,Z, ir nuleidžia jį ant pagrindo. Taškas nurodomas objekto koordinatėmis, kurios apima prieš šią parinktį nurodytus pasukimus; --inspect-mesh pateikia sienų centrus būtent jomis. Objektai, neturintys tokios sienos, paliekami tokie, kokie yra, o vykdymas nepavyksta, jei tokios sienos neturi nė vienas objektas. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją."
+
 msgid "Scale the model by a float factor."
 msgstr "Keisti modelio mastelį pagal slankiojo kablelio koeficientą."
 
@@ -20865,6 +21131,18 @@ msgstr "Šio veiksmo atšaukti nebus galima. Tęsti?"
 msgid "Skipping objects."
 msgstr "Praleidžiami objektai."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Medžiagos santykis"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modelio aukštis"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Santykis"
+
 msgid "Select Filament"
 msgstr "Pasirinkti giją"
 
@@ -21119,12 +21397,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Džiovinimas – sausinimas"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " didžiausia džiovinimo temperatūra yra "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Didžiausia %s džiovinimo temperatūra yra %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " mažiausia džiovinimo temperatūra yra "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Mažiausia %s džiovinimo temperatūra yra %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21569,6 +21849,95 @@ msgstr ""
 "Venkite deformacijų (warping)\n"
 "Ar žinojote, kad spausdinant medžiagas, kurios yra linkusios trauktis ir riestis (pvz., ABS), tinkamas kaitinamojo pagrindo temperatūros padidinimas gali sumažinti deformacijų (warping) tikimybę?"
 
+#~ msgid "Other"
+#~ msgstr "Kita"
+
+#~ msgid "Left: "
+#~ msgstr "Kairė:"
+
+#~ msgid "Right: "
+#~ msgstr "Dešinė:"
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Maksimali temperatūra negali viršyti "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Minimali temperatūra neturi būti mažesnė nei "
+
+#~ msgid "up to"
+#~ msgstr "iki"
+
+#~ msgid "above"
+#~ msgstr "virš"
+
+#~ msgid "from"
+#~ msgstr "nuo"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Konfigūracijos paketas: "
+
+#~ msgid " updated to "
+#~ msgstr " atnaujintas į "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Grupavimo klaida: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr "negali būti įkeltas į "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " didžiausia džiovinimo temperatūra yra "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " mažiausia džiovinimo temperatūra yra "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "reikalauja"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "neįjungta"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "medžiaga nepatalpinta"
+
+#~ msgid "Select the language"
+#~ msgstr "Pasirinkite kalbą"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Pasirinkti papildinį"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Kryptis, kuria užpildomi viršutiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n"
+#~ "„Į išorę“ prasideda paviršiaus centre, todėl bet koks perteklinė medžiaga stumiama link krašto, kur ji mažiausiai matoma. „Į vidų“ prasideda nuo krašto ir baigiasi ankštomis kreivėmis centre.\n"
+#~ "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Kryptis, kuria užpildomi apatiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n"
+#~ "„Į vidų“ pradeda kiekvieną paviršių platesnėmis išorinėmis kreivėmis, o tai pagerina pirmojo sluoksnio sukibimą ant pagrindų, kur ankštos kreivės centre gali nesilaikyti. „Į išorę“ prasideda centre, stumdama bet kokią perteklinę medžiagą link krašto.\n"
+#~ "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Jei įjungta, valymo bokštas nebus spausdinamas tuose sluoksniuose, kur įrankis nekeičiamas. Sluoksniuose, kur įrankis keičiamas, ekstruderis nusileis žemyn atspausdinti valymo bokšto dalies. Naudotojas pats atsako už tai, kad ekstruderis nesusidurtų su spaudiniu."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Tai eksportuoja nustatymus į failą."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Tiesioginei „Native Wayland“ peržiūrai reikalingas „GStreamer GTK“ vaizdo sinchronizatorius (video sink). Įdiekite „GStreamer“ skirtą „gtksink“ papildinį, tada iš naujo paleiskite „OrcaSlicer“."
 
diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po
index 4fd3601c0e..24d2f3a322 100644
--- a/localization/i18n/nl/OrcaSlicer_nl.po
+++ b/localization/i18n/nl/OrcaSlicer_nl.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2679,15 +2679,6 @@ msgstr "Er is een update beschikbaar. Open het dialoogvenster voor de voorinstel
 msgid "%s has been removed."
 msgstr "%s is verwijderd."
 
-msgid "Switching application language"
-msgstr "De taal van de applicatie wordt aangepast"
-
-msgid "Select the language"
-msgstr "Kies de taal"
-
-msgid "Language"
-msgstr "Taal"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -4033,12 +4024,14 @@ msgid "Switch track at Filament Track Switch"
 msgstr "Van baan wisselen bij de Filament Track Switch"
 
 # AI Translated
-msgid "The maximum temperature cannot exceed "
-msgstr "De maximumtemperatuur mag niet hoger zijn dan "
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "De maximumtemperatuur mag niet hoger zijn dan %d"
 
 # AI Translated
-msgid "The minmum temperature should not be less than "
-msgstr "De minimumtemperatuur mag niet lager zijn dan "
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "De minimumtemperatuur mag niet lager zijn dan %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -5010,6 +5003,15 @@ msgstr ""
 "Fout bij het exporteren naar output-G-code. Is de SD-kaart geblokkeerd tegen schrijven?\n"
 "Foutbericht: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Het kopiëren van de tijdelijke G-code naar de uitvoer-G-code is mislukt.\n"
+"Foutmelding: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Fout bij het exporteren naar output-G-code. Het probleem ligt mogelijk bij het doelapparaat. Probeer het opnieuw te exporteren of gebruik een ander apparat. De beschadigde G-code is opgeslagen als %1%.tmp."
@@ -5325,6 +5327,9 @@ msgstr ""
 "Ja - Pas de instellingen aan en zet de vaas modus automatisch aan\n"
 "Nee - Pas de vaas modus deze keer niet toe"
 
+msgid "N/A"
+msgstr "N/B"
+
 msgid "Printing"
 msgstr "Printen"
 
@@ -5829,14 +5834,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Waarde %s valt buiten het bereik. Het geldige bereik loopt van %d tot %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Is het %s%% or %s %s?\n"
-"JA voor %s%%, \n"
-"NEE voor %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Is het %s%% or %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5861,29 +5863,22 @@ msgstr "Ongeldig patroon. Gebruik N, N#K of een door komma's gescheiden lijst me
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Onjuist formaat. Het Vector formaat wordt verwacht: \"%1%\""
 
-msgid "N/A"
-msgstr "N/B"
-
 # AI Translated
 msgid "System agents"
 msgstr "Systeemagenten"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Geen plug-in geselecteerd"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Plug-in toevoegen"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Plug-in selecteren"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Plug-in verwijderen"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Geen plug-in geselecteerd"
+
 # AI Translated
 msgid "Configure"
 msgstr "Configureren"
@@ -6160,14 +6155,20 @@ msgstr "Op optimaal instellen"
 msgid "Regroup filament"
 msgstr "Filamenten opnieuw groeperen"
 
-msgid "up to"
-msgstr "tot"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "tot %1% mm"
 
-msgid "above"
-msgstr "Boven"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "boven %1% mm"
 
-msgid "from"
-msgstr "Van"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "van %1% tot %2% mm"
 
 msgid "Usage"
 msgstr "Gebruik"
@@ -6553,7 +6554,7 @@ msgid "Size:"
 msgstr "Maat:"
 
 # AI Translated
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Er zijn conflicten tussen G-code-paden gevonden op laag %d, Z = %.2lfmm. Plaats de conflicterende objecten verder uit elkaar (%s <-> %s)."
 
@@ -6888,6 +6889,14 @@ msgstr "Bewaar project als"
 msgid "Save current project as"
 msgstr "Bewaar huidig project als"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MF publiceren"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Een 3MF-bestand exporteren met de geselecteerde instellingen erin ingesloten"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "3MF/STL/STEP/SVG/OBJ/AMF importeren"
 
@@ -8273,6 +8282,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Onderste"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Deze instelling geeft geen type plug-infunctionaliteit op."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Deze instelling geeft een niet-herkend type plug-infunctionaliteit op: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Plug-inselectie"
@@ -8904,6 +8921,14 @@ msgstr "Controleer of de G-codes in deze presets veilig zijn om schade aan de ma
 msgid "Customized Preset"
 msgstr "Aangepaste voorinstelling"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Sommige gepubliceerde instellingen konden niet worden toegepast:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Sommige filamentsleuven zijn gewijzigd:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Naam van componenten in step-bestand is niet UTF-8-formaat!"
 
@@ -9339,6 +9364,21 @@ msgstr "Bewaar het geslicede bestand als:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Het bestand %s is naar de opslagruimte van de printer gestuurd en kan op de printer worden bekeken."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MF-bestand publiceren als:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Het exporteren van het gepubliceerde 3MF-bestand is mislukt.\n"
+"Controleer of de map online bestaat of dat andere programma's het bestand geopend hebben."
+
+msgid "Publish"
+msgstr "Publiceren"
+
 # AI Translated
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Het mondstuktype is niet ingesteld. Stel het mondstuk in en probeer het opnieuw."
@@ -9579,9 +9619,6 @@ msgstr "Wilt u doorgaan?"
 msgid "Language selection"
 msgstr "Taal selectie"
 
-msgid "Switching application language while some presets are modified."
-msgstr "De taal van de toepassing aanpaasen terwijl sommige voorinstellingen zijn aangepast."
-
 msgid "Asia-Pacific"
 msgstr "Azië-Pacific"
 
@@ -9696,6 +9733,9 @@ msgstr "Huidig instancepad: "
 msgid "General"
 msgstr "Algemeen"
 
+msgid "Language"
+msgstr "Taal"
+
 msgid "Metric"
 msgstr "Metrisch"
 
@@ -10200,9 +10240,6 @@ msgstr "Bij het verschuiven van de laagschuifregelaar in de slicevoorvertoning w
 msgid "Dimmed layer brightness"
 msgstr "Helderheid van gedimde lagen"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -10626,9 +10663,6 @@ msgstr "Ga naar de website om het model te publiceren"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Notitie: het voorbereiden kan enkele minuten duren. Even geduld alstublieft."
 
-msgid "Publish"
-msgstr "Publiceren"
-
 msgid "Publish was canceled"
 msgstr "Het publiceren is geannuleerd"
 
@@ -10645,6 +10679,81 @@ msgstr "Gegevens uploaden"
 msgid "Jump to webpage"
 msgstr "Ga naar de website"
 
+# AI Translated
+msgid "Material"
+msgstr "Materiaal"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Gemengd filament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Sommige gemengde filamenten zijn afhankelijk van filamenten die niet worden gepubliceerd:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (gemengd)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% heeft %2% nodig, dat niet is ingeschakeld."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% heeft %2% nodig, waarvan het materiaal niet wordt gepubliceerd."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Om een gemengd filament te publiceren, schakel je elk filament in dat het gebruikt en kies je Volledig publiceren of voldoe je aan de Type-vereiste ervan."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Toch publiceren"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MF publiceren..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Selecteer welke instellingen in het 3MF-bestand worden gepubliceerd"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki over 3MF publiceren"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Videohandleiding over 3MF publiceren"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Gemengd filament - wordt als geheel gepubliceerd wanneer hierboven \"Inschakelen\" is geselecteerd"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Dit gemengde filament publiceren en de samenstellende filamenten inschakelen + volledig publiceren"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Deze filamentsleuf publiceren in het 3MF-bestand"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Volledig publiceren"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Het volledige filament van deze sleuf insluiten in het 3MF-bestand"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Niet-geselecteerde filteren"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Bewaar %s als"
@@ -10663,6 +10772,10 @@ msgstr "Kopieert alle overgeërfde waarden van de bovenliggende voorinstelling n
 msgid "Detach from parent"
 msgstr "Losmaken van bovenliggend element"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Opslaan zonder bovenliggend element"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Unieke voorinstelling"
@@ -11433,9 +11546,17 @@ msgstr "Voor klontdetectie is een prime toren vereist. Zonder prime toren kunnen
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Het inschakelen van zowel precieze Z-hoogte als de spoeltoren kan slicefouten veroorzaken. Wilt u precieze Z-hoogte nog steeds inschakelen?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Vloeiende timelapse heeft op elke laag een prime toren nodig, wat niet samengaat met \"Geen dunne lagen\". \"Geen dunne lagen\" is uitgeschakeld."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Een prime-toren is vereist voor een vloeiende timelapse-modus. Er kunnen gebreken ontstaan aan het model zonder prime-toren. Wilt u de prime-toren inschakelen?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Geen dunne lagen\" gaat niet samen met vloeiende timelapse, die op elke laag een prime toren nodig heeft. De timelapse is overgeschakeld naar de traditionele modus."
+
 msgid "Still print by object?"
 msgstr "Print je nog steeds per object?"
 
@@ -11824,10 +11945,6 @@ msgstr "Geschikte proces profielen"
 msgid "Printable space"
 msgstr "Ruimte waarbinnen geprint kan worden"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "Printeragent"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Selecteer de implementatie van de netwerkagent voor de communicatie met de printer. Beschikbare agenten worden bij het opstarten geregistreerd."
@@ -12268,14 +12385,6 @@ msgstr "Aantal extruders"
 msgid "Capabilities"
 msgstr "Mogelijkheden"
 
-# AI Translated
-msgid "Left: "
-msgstr "Links: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Rechts: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Toon alle presets (inclusief incompatibele)"
 
@@ -13218,17 +13327,22 @@ msgstr "Repareren geannuleerd"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Het kopieeren van bestand %1% naar %2% is mislukt: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Nieuwe leveranciersprofielen downloaden: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Configuratiepakket: %1% bijgewerkt naar %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Downloaden van leveranciersprofielen mislukt: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Controleer niet-opgeslagen wijzigingen voordat u de configuratie bijwerkt."
 
-# AI Translated
-msgid "Configuration package: "
-msgstr "Configuratiepakket: "
-
-# AI Translated
-msgid " updated to "
-msgstr " bijgewerkt naar "
-
 msgid "Open G-code file:"
 msgstr "Open G-code bestand:"
 
@@ -13296,12 +13410,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping wordt alleen ondersteund door Klipper, RepRapFirmware en Marlin 2."
 
 # AI Translated
-msgid "Grouping error: "
-msgstr "Groeperingsfout: "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Groeperingsfout: %1% kan niet in de linker nozzle worden geplaatst"
 
 # AI Translated
-msgid " can not be placed in the "
-msgstr " kan niet worden geplaatst in de "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Groeperingsfout: %1% kan niet in de rechter nozzle worden geplaatst"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -13416,6 +13532,10 @@ msgstr "%1% staat te dicht bij anderen en er kunnen botsingen ontstaan."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% is te hoog en er kunnen botsingen ontstaan."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "De onderlinge positie van het model en de prime toren voldoet niet aan de eisen van de functie \"Geen dunne lagen\". Pas hun onderlinge posities aan, verlaag de modelhoogte of schakel \"Geen dunne lagen\" uit."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr "is te dicht bij het uitsluitingsgebied, er botsingen optreden tijdens het printen."
 
@@ -13811,6 +13931,10 @@ msgstr "3MF gebruiken in plaats van G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Schakel dit in als de printer een 3MF-bestand als printopdracht accepteert. Indien ingeschakeld verzendt Orca Slicer het geslicede bestand als een .gcode.3mf in plaats van als een gewoon .gcode-bestand."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "Printeragent"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Selecteer de implementatie van de netwerkagent voor de communicatie met de printer."
@@ -14975,6 +15099,10 @@ msgstr "Uitgelijnd Rechtlijnig"
 msgid "Concentric"
 msgstr "Concentrisch"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spiraalinzet"
+
 # AI Translated
 msgid "Hilbert Curve"
 msgstr "Hilbertkromme"
@@ -15072,12 +15200,12 @@ msgstr "Vulvolgorde bovenoppervlak"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Richting waarin bovenoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n"
-"Naar buiten begint in het midden van het oppervlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst zichtbaar is. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n"
+"Richting waarin bovenvlakken worden gevuld bij een patroon dat vanuit het midden werkt (Concentrisch, Spiraalinzet, Archimedische koorden, Octagram Spiraal).\n"
+"Naar buiten begint in het midden van het vlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst opvalt. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n"
 "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen."
 
 # AI Translated
@@ -15086,12 +15214,12 @@ msgstr "Vulvolgorde onderoppervlak"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Richting waarin onderoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n"
-"Naar binnen begint elk oppervlak met de bredere buitenbochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet hechten. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n"
+"Richting waarin ondervlakken worden gevuld bij een patroon dat vanuit het midden werkt (Concentrisch, Spiraalinzet, Archimedische koorden, Octagram Spiraal).\n"
+"Naar binnen begint elk vlak met de bredere buitenste bochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet plakken. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n"
 "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen."
 
 msgid "Internal solid infill pattern"
@@ -15209,6 +15337,14 @@ msgstr "Tegen de klok in"
 msgid "Clockwise"
 msgstr "Met de klok mee"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Afstand tot de stang"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Horizontale afstand van de punt van het mondstuk tot de verste rand van de stang. Wordt gebruikt om botsingen te vermijden bij printen op basis van object."
+
 msgid "Height to rod"
 msgstr "Hoogte tot geleider"
 
@@ -17665,6 +17801,20 @@ msgstr "Overhange wand detecteren"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Dit maakt het mogelijk om het overhangpercentage ten opzichte van de lijnbreedte te detecteren en gebruikt verschillende snelheden om af te drukken. Voor 100%% overhang wordt de brugsnelheid gebruikt."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Niet-ondersteunde wanden als laatste printen"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Wandlussen die volledig in de lucht liggen, worden pas geprint zodra iets ze kan dragen:\n"
+"ze worden geëxtrudeerd na de andere wanden van hun eiland, de binnenste eerst, ongeacht de wandvolgorde.\n"
+"Een lus die alleen de bruggen van deze laag kunnen verankeren, wacht tot die bruggen geprint zijn, terwijl een lus die langs een ondersteunde wand loopt zijn plek vóór de vulling behoudt, die hem als verankering nodig heeft."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Buitenste wanden"
@@ -18172,6 +18322,39 @@ msgstr "Vegen bij lussen"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Om de zichtbaarheid van de naad bij een gesloten lusextrusie te minimaliseren, wordt er een kleine beweging naar binnen uitgevoerd voordat de extruder de lus verlaat."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Naar binnen vegen"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Geldt alleen voor buitenwanden, inclusief gatcontouren. Beweegt het hete mondstuk tijdens het vegen naar reeds geprinte binnenwanden, om het opnieuw opwarmen van vers geprint plastic en naadsporen te beperken.\n"
+"\n"
+"Vooral nuttig bij laaghoogtes onder 0,1 mm, waar veegsporen beter zichtbaar zijn.\n"
+"\n"
+"Gebruikt het gewone vegen als er nog geen aangrenzende binnenwand geprint is (gebieden met één wand of de wandvolgorde Buiten/Binnen), of als er geen ondersteund pad naar binnen gevonden kan worden, bijvoorbeeld bij krappe hoeken of onderbrekingen in de naad."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Afstand voor naar binnen vegen"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"De afstand waarover het veegpad van de buitenste omtrek af wordt verschoven, opgegeven in millimeters of als percentage van de werkelijke extrusiebreedte van de buitenwand.\n"
+"\n"
+"Bijvoorbeeld: 50% verschuift het pad over de helft van de breedte van de buitenwand. De effectieve verschuiving wordt begrensd door zowel de werkelijke breedte van de buitenwand als de beschikbare ruimte tot de aangrenzende wand, dus waarden boven 100% of een gelijkwaardige absolute afstand hebben geen extra effect. Stel in op 0 om de verschuiving uit te schakelen."
+
 # AI Translated
 msgid "Wipe before external loop"
 msgstr "Vegen vóór de externe lus"
@@ -18479,8 +18662,9 @@ msgstr "Pakt het nieuwe gereedschap op zonder te wachten tot het de printtempera
 msgid "No sparse layers (beta)"
 msgstr "Geen dunne lagen (bèta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele botsingen met de print."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Indien ingeschakeld wordt het afveegblok niet geprint op lagen zonder gereedschapswissels. Op lagen met een gereedschapswissel beweegt de extruder omlaag om het afveegblok te printen, zodat het blok onder het model uitkomt en de printkop ernaartoe omlaag moet reiken. Opstellingen waarbij dat zou botsen met een al geprint voorwerp worden afgewezen. Heeft geen effect bij vloeiende timelapse of klontdetectie, die op elke laag een blok nodig hebben."
 
 msgid "Prime all printing extruders"
 msgstr "Veeg alle printextruders af"
@@ -18506,6 +18690,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cyclisch"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Cyclische volgorde"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Aangepaste filamentvolgorde die door de cyclische gereedschapswisselvolgorde wordt gebruikt, als filamentnummers gescheiden door komma's (bijv. \"3,2,1,4\").\n"
+"Elke laag print zijn filamenten volgens deze volgorde; niet vermelde filamenten worden als laatste geprint, in oplopende volgorde.\n"
+"Laat leeg om de filamenten in oplopende volgorde te doorlopen."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Cyclische volgorde toepassen op de eerste laag"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Past de cyclische gereedschapswisselvolgorde ook toe op de eerste laag.\n"
+"Standaard staat dit uit, omdat de eerste laag juist wordt geordend voor de beste printbed hechting: filamenten die kleine, kwetsbare details van de eerste laag printen, worden als laatste geprint, zodat de daaropvolgende gereedschapswissels en verplaatsingen die zwak verankerde delen minder snel losstoten. Deze volgorde van de eerste laag houdt ook rekening met een aangepaste filamentvolgorde voor de eerste laag, als die is ingesteld. Het voordeel van de cyclische volgorde (extra gereedschapswissels geven elke laag meer tijd om af te koelen) geldt niet voor de eerste laag, die langzaam en heet wordt geprint voor de hechting.\n"
+"Schakel dit alleen in als je op elke laag, inclusief de eerste, exact dezelfde gereedschapsvolgorde nodig hebt, ten koste van die hechtingsoptimalisatie."
+
 msgid "Slice gap closing radius"
 msgstr "Sluitingsradius van de gap"
 
@@ -18515,9 +18727,6 @@ msgstr "Scheuren kleiner dan 2x de sluitradius van de spleet worden opgevuld tij
 msgid "Slicing Mode"
 msgstr "Slicing-modus"
 
-msgid "Other"
-msgstr "Anders"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Gebruik „Even-Oneven” voor 3DLabPrint-vliegtuigmodellen. Gebruik „Gaten sluiten” om alle gaten in het model te sluiten."
 
@@ -19614,6 +19823,14 @@ msgstr "Geen controle"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Voer geen geldigheidscontroles uit, zoals de controle op conflicten tussen G-code-paden."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Strikte modus"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Sluit af met een andere waarde dan nul wanneer het slicen een niet-kritieke waarschuwing oplevert die anders alleen gelogd wordt, zoals een model dat ondersteuning nodig heeft terwijl ondersteuning uitstaat. Gebruik dit in CI of in geautomatiseerde pipelines die nooit een subtiel kapotte slice mogen opleveren. Elke zo'n waarschuwing staat ook met een stabiele klasse in de array `warnings` van result.json, die alleen op Linux wordt geschreven. Kan niet worden gecombineerd met --no-check, dat de ondersteuningscontrole overslaat."
+
 # AI Translated
 msgid "Normative check"
 msgstr "Normatieve controle"
@@ -19628,11 +19845,28 @@ msgstr "Model informatie weergeven"
 msgid "This outputs the model’s information."
 msgstr "Dit geeft de informatie van het model weer."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Mesh inspecteren (JSON naar stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Print een JSON-samenvatting van elk geladen voorwerp naar stdout en sluit dan af: de begrenzingskaders en de vlakken van de convexe omhulling waarop het kan rusten, met hun normalen, oppervlakten en middelpunten. Dit zijn de vlakken waaruit de opties --ground-* kiezen. Machineleesbaar alternatief voor --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Beschildering inspecteren (JSON naar stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Print een gestructureerde JSON-samenvatting van elke beschilderde laag (ondersteuning, naad, MMU-kleur, vage buitenkant) die al op het geladen model is opgeslagen — aantal facetten, oppervlakte en mesh-lokaal begrenzingskader per toestand — en sluit dan af. Machineleesbaar alternatief voor het openen van de schildergizmo's in de interface."
+
 msgid "Export Settings"
 msgstr "Exporteer instellingen"
 
-msgid "This exports settings to a file."
-msgstr "Exporteer instellingen naar een bestand"
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Dit exporteert instellingen naar een bestand. Gebruik - om ze naar stdout te schrijven."
 
 msgid "Send progress to pipe"
 msgstr "Stuur voortgang naar pipe"
@@ -19691,6 +19925,30 @@ msgstr "Draai over de Y-as"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Rotatiehoek rond de Y-as in graden."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Op grootste vlak leggen"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt elk voorwerp op het grootste vlak van zijn convexe omhulling en laat het op het printbed zakken. Van even grote vlakken blijft het vlak dat al omlaag wijst behouden. Voorwerpen zonder een vlak dat groot genoeg is om op te rusten, blijven zoals ze zijn. Transformaties worden uitgevoerd in de volgorde van de opdrachtregel, dus rotaties die vóór deze optie zijn opgegeven worden gerespecteerd. --orient 1 draait na alle transformaties en vervangt de oriëntatie."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Op vlak volgens normaal leggen"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt elk voorwerp op het vlak van de convexe omhulling waarvan de naar buiten gerichte normaal het dichtst bij de richting NX,NY,NZ ligt, en laat het op het printbed zakken. De richting is in voorwerpcoördinaten, die de vóór deze optie opgegeven rotaties bevatten en overeenkomen met de assen van het printbed, tenzij het invoerbestand het voorwerp draait. Bijvoorbeeld: 1,0,0 zet het voorwerp op zijn +X-zijde. --orient 1 draait na alle transformaties en vervangt de oriëntatie."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Op vlak bij punt leggen"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Legt elk voorwerp op het vlak van de convexe omhulling dat het punt X,Y,Z bevat, en laat het op het printbed zakken. Het punt is in voorwerpcoördinaten, die de vóór deze optie opgegeven rotaties bevatten; --inspect-mesh geeft de middelpunten van vlakken in die coördinaten. Voorwerpen zonder zo'n vlak blijven zoals ze zijn, en de uitvoering mislukt als geen enkel voorwerp er een heeft. --orient 1 draait na alle transformaties en vervangt de oriëntatie."
+
 msgid "Scale the model by a float factor."
 msgstr "Schaal het model met een float-factor"
 
@@ -23245,6 +23503,18 @@ msgstr "Deze actie kan niet ongedaan worden gemaakt. Doorgaan?"
 msgid "Skipping objects."
 msgstr "Objecten worden overgeslagen."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Materiaalverhouding"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modelhoogte"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Verhouding"
+
 msgid "Select Filament"
 msgstr "Selecteer filament"
 
@@ -23553,12 +23823,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Drogen - ontvochtigen"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " de maximale droogtemperatuur is "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "De maximale droogtemperatuur van %s is %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " de minimale droogtemperatuur is "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "De minimale droogtemperatuur van %s is %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -24009,6 +24281,103 @@ msgstr ""
 "Kromtrekken voorkomen\n"
 "Wist je dat bij het printen van materialen die gevoelig zijn voor kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Other"
+#~ msgstr "Anders"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Links: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Rechts: "
+
+# AI Translated
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "De maximumtemperatuur mag niet hoger zijn dan "
+
+# AI Translated
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "De minimumtemperatuur mag niet lager zijn dan "
+
+#~ msgid "up to"
+#~ msgstr "tot"
+
+#~ msgid "above"
+#~ msgstr "Boven"
+
+#~ msgid "from"
+#~ msgstr "Van"
+
+# AI Translated
+#~ msgid "Configuration package: "
+#~ msgstr "Configuratiepakket: "
+
+# AI Translated
+#~ msgid " updated to "
+#~ msgstr " bijgewerkt naar "
+
+# AI Translated
+#~ msgid "Grouping error: "
+#~ msgstr "Groeperingsfout: "
+
+# AI Translated
+#~ msgid " can not be placed in the "
+#~ msgstr " kan niet worden geplaatst in de "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " de maximale droogtemperatuur is "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " de minimale droogtemperatuur is "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "heeft nodig"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "niet ingeschakeld"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materiaal niet gepubliceerd"
+
+#~ msgid "Select the language"
+#~ msgstr "Kies de taal"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Plug-in selecteren"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Richting waarin bovenoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n"
+#~ "Naar buiten begint in het midden van het oppervlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst zichtbaar is. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n"
+#~ "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Richting waarin onderoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n"
+#~ "Naar binnen begint elk oppervlak met de bredere buitenbochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet hechten. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n"
+#~ "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele botsingen met de print."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exporteer instellingen naar een bestand"
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Voor de native Wayland-liveview is de GStreamer GTK-videosink nodig. Installeer de gtksink-plug-in voor GStreamer en start OrcaSlicer opnieuw."
diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po
index 0f6fa10e3b..8f66233eb3 100644
--- a/localization/i18n/pl/OrcaSlicer_pl.po
+++ b/localization/i18n/pl/OrcaSlicer_pl.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -2512,15 +2512,6 @@ msgstr "Dostępna jest aktualizacja. Otwórz okno pakietu profili, aby ją zains
 msgid "%s has been removed."
 msgstr "%s został usunięty."
 
-msgid "Switching application language"
-msgstr "Zmiana języka aplikacji"
-
-msgid "Select the language"
-msgstr "Wybierz język"
-
-msgid "Language"
-msgstr "Język"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3791,11 +3782,15 @@ msgstr "Wycofaj bieżący filament na Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Przełącz tor na Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Maksymalna temperatura nie może przekroczyć "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Maksymalna temperatura nie może przekroczyć %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Minimalna temperatura nie powinna być mniejsza niż "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Minimalna temperatura nie powinna być mniejsza niż %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4704,6 +4699,15 @@ msgstr ""
 "Kopiowanie tymczasowego G-code do wyjściowego pliku G-code nie powiodło się. Być może karta SD jest zablokowana do zapisu?\n"
 "Komunikat błędu: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Skopiowanie tymczasowego G-code do wyjściowego G-code nie powiodło się.\n"
+"Komunikat błędu: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Kopiowanie tymczasowego G-code do wyjściowego pliku G-code nie powiodło się. Może być problem z urządzeniem docelowym, spróbuj ponownie wyeksportować lub użyć innego urządzenia. Uszkodzony plik wyjściowego G-code znajduje się w pliku %1%.tmp."
@@ -5013,6 +5017,10 @@ msgstr ""
 "Tak - Zmień te ustawienia automatycznie i włącz tryb Wazy\n"
 "Nie - Zrezygnuj tym razem z używania trybu Wazy"
 
+# AI Translated
+msgid "N/A"
+msgstr "Nie dotyczy"
+
 msgid "Printing"
 msgstr "Drukowanie"
 
@@ -5449,14 +5457,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Wartość %s jest spoza zakresu. Poprawny zakres wynosi od %d do %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Czy to %s%% czy %s %s?\n"
-"TAK dla %s%%,\n"
-"NIE dla %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Czy to %s%% czy %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5480,30 +5485,22 @@ msgstr "Nieprawidłowy wzorzec. Użyj N, N#K lub listy rozdzielonej przecinkami
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Nieprawidłowy format. Oczekiwano formatu wektorowego: „%1%”"
 
-# AI Translated
-msgid "N/A"
-msgstr "Nie dotyczy"
-
 # AI Translated
 msgid "System agents"
 msgstr "Agenci systemowi"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Nie wybrano wtyczki"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Dodaj wtyczkę"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Wybierz wtyczkę"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Usuń wtyczkę"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Nie wybrano wtyczki"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfiguruj"
@@ -5767,14 +5764,20 @@ msgstr "Ustaw na optymalne"
 msgid "Regroup filament"
 msgstr "Zmień grupowanie filamentu"
 
-msgid "up to"
-msgstr "do"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "do %1% mm"
 
-msgid "above"
-msgstr "powyżej"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "powyżej %1% mm"
 
-msgid "from"
-msgstr "od"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "od %1% do %2% mm"
 
 # AI Translated
 msgid "Usage"
@@ -6149,7 +6152,7 @@ msgstr "Objętość:"
 msgid "Size:"
 msgstr "Rozmiar:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Wykryto konflikty ścieżek G-code na warstwie %d, Z = %.2lfmm. Proszę oddalić od siebie obiekty będące w konflikcie (%s <-> %s)."
 
@@ -6469,6 +6472,14 @@ msgstr "Zapisz projekt jako"
 msgid "Save current project as"
 msgstr "Zapisz bieżący projekt jako"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Opublikuj 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Eksportuj plik 3MF z osadzonymi wybranymi ustawieniami"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importuj 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7779,6 +7790,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Dół"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "To ustawienie nie określa typu funkcji wtyczki."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "To ustawienie określa nierozpoznany typ funkcji wtyczki: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Wybór wtyczek"
@@ -8353,6 +8372,14 @@ msgstr "Proszę potwierdź, że G-code w tych profilach jest bezpieczny, aby zap
 msgid "Customized Preset"
 msgstr "Dostosowany profil"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Niektórych opublikowanych ustawień nie udało się zastosować:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Niektóre gniazda filamentu zostały zmienione:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Nazwa komponentów w pliku step nie jest w formacie UTF-8!"
 
@@ -8779,6 +8806,21 @@ msgstr "Zapisz plik po wykonaniu cięcia jako:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Plik %s został wysłany do pamięci drukarki i można go obejrzeć na urządzeniu."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Opublikuj plik 3MF jako:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Nie udało się wyeksportować opublikowanego pliku 3MF.\n"
+"Sprawdź, czy folder istnieje w trybie online lub czy inne programy nie mają otwartego tego pliku."
+
+msgid "Publish"
+msgstr "Opublikuj"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Nie ustawiono typu dyszy Wprowadź ustawienia dyszy i spróbuj ponownie."
 
@@ -8993,9 +9035,6 @@ msgstr "Czy kontynuować?"
 msgid "Language selection"
 msgstr "Wybór języka"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Zmiana języka aplikacji przy jednoczesnym istniejących zmodyfikowanych ustawieniach."
-
 msgid "Asia-Pacific"
 msgstr "Azja i Pacyfik"
 
@@ -9109,6 +9148,9 @@ msgstr "Aktualna ścieżka instancji: "
 msgid "General"
 msgstr "Ogólne"
 
+msgid "Language"
+msgstr "Język"
+
 msgid "Metric"
 msgstr "Metryczne"
 
@@ -9603,9 +9645,6 @@ msgstr "Podczas przewijania suwaka warstw w podglądzie po cięciu renderuj wars
 msgid "Dimmed layer brightness"
 msgstr "Jasność przyciemnionych warstw"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -10021,9 +10060,6 @@ msgstr "Przejdź do strony publikacji modelu"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Uwaga: Przygotowanie może zająć kilka minut. Proszę o cierpliwość."
 
-msgid "Publish"
-msgstr "Opublikuj"
-
 msgid "Publish was canceled"
 msgstr "Publikacja została anulowana"
 
@@ -10040,6 +10076,81 @@ msgstr "Przesyłanie danych"
 msgid "Jump to webpage"
 msgstr "Przejdź na stronę"
 
+# AI Translated
+msgid "Material"
+msgstr "Materiał"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filament mieszany"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Niektóre filamenty mieszane zależą od filamentów, które nie zostaną opublikowane:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (mieszany)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% wymaga %2%, który nie jest włączony."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% wymaga %2%, którego materiał nie zostanie opublikowany."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Aby opublikować filament mieszany, włącz każdy filament, którego używa, i wybierz Pełną publikację lub spełnij jego wymaganie Rodzaju."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Opublikuj mimo to"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Opublikuj 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Wybierz, które ustawienia zostaną opublikowane w pliku 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki publikowania 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Poradnik wideo publikowania 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filament mieszany - publikowany w całości, gdy powyżej zaznaczono \"Włącz\""
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Opublikuj ten filament mieszany oraz włącz + opublikuj w całości jego filamenty składowe"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Opublikuj to gniazdo filamentu w pliku 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Pełna publikacja"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Osadź cały filament z tego gniazda w pliku 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtruj niezaznaczone"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Zapisz %s jako"
@@ -10058,6 +10169,10 @@ msgstr "Kopiuje do tego profilu wszystkie wartości odziedziczone z profilu nadr
 msgid "Detach from parent"
 msgstr "Odłącz od elementu nadrzędnego"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Zapisz bez elementu nadrzędnego"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Profil niezależny"
@@ -10781,9 +10896,17 @@ msgstr "Wykrywanie zlepiania wymaga wieży czyszczącej. Bez wieży czyszczącej
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Jednoczesne włączenie precyzyjnej wysokości Z i wieży czyszczącej może powodować błędy cięcia. Czy nadal chcesz włączyć precyzyjną wysokość Z?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Płynny timelapse wymaga wieży czyszczącej na każdej warstwie, co nie jest zgodne z opcją \"Warstwy bez czyszczenia\". Opcja \"Warstwy bez czyszczenia\" została wyłączona."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Wieża czyszcząca jest wymagana dla płynnego timelapse. Możliwe są wady na modelu bez wieży czyszczącej. Czy włączyć wieżę czyszczącą?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "Opcja \"Warstwy bez czyszczenia\" nie jest zgodna z płynnym timelapse, który wymaga wieży czyszczącej na każdej warstwie. Timelapse został przełączony w tryb tradycyjny."
+
 msgid "Still print by object?"
 msgstr "Czy nadal drukować według obiektu?"
 
@@ -11168,10 +11291,6 @@ msgstr "Kompatybilne profile procesów"
 msgid "Printable space"
 msgstr "Przestrzeń do druku"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "Agent drukarki"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Wybierz implementację agenta sieciowego do komunikacji z drukarką. Dostępni agenci są rejestrowani przy uruchamianiu."
@@ -11600,14 +11719,6 @@ msgstr "Liczba ekstruderów"
 msgid "Capabilities"
 msgstr "Możliwości"
 
-# AI Translated
-msgid "Left: "
-msgstr "Lewy: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Prawy: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Pokaż wszystkie profile (łącznie z niekompatybilnymi)"
 
@@ -12466,15 +12577,22 @@ msgstr "Naprawa anulowana"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Nie udało się skopiować pliku %1% do %2%: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Pobieranie nowych profili producentów: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Pakiet konfiguracyjny: %1% zaktualizowany do %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Nie udało się pobrać profili producentów: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Należy sprawdzić niezapisane zmiany przed aktualizacją konfiguracji."
 
-msgid "Configuration package: "
-msgstr "Pakiet konfiguracyjny:"
-
-msgid " updated to "
-msgstr " aktualizacja do "
-
 msgid "Open G-code file:"
 msgstr "Otwórz plik G-code:"
 
@@ -12538,11 +12656,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping jest obsługiwany tylko przez Klipper, RepRapFirmware i Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Błąd grupowania: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Błąd grupowania: %1% nie może zostać umieszczony w lewej dyszy"
 
-msgid " can not be placed in the "
-msgstr " nie może być umieszczony w "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Błąd grupowania: %1% nie może zostać umieszczony w prawej dyszy"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12657,6 +12779,10 @@ msgstr "%1% jest zbyt blisko innych, mogą wystąpić kolizje."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% jest zbyt wysoki, mogą wystąpić kolizje."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Wzajemne położenie modelu i wieży czyszczącej nie spełnia wymagań funkcji \"Warstwy bez czyszczenia\". Zmień ich wzajemne położenie, zmniejsz wysokość modelu albo wyłącz opcję \"Warstwy bez czyszczenia\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " jest zbyt blisko obszaru wykluczenia, mogą wystąpić kolizje podczas drukowania."
 
@@ -13029,6 +13155,10 @@ msgstr "Użyj 3MF zamiast G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Włącz tę opcję, jeśli drukarka przyjmuje plik 3MF jako zadanie druku. Po włączeniu Orca Slicer wysyła plik po cięciu jako .gcode.3mf zamiast zwykłego pliku .gcode."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "Agent drukarki"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Wybierz implementację agenta sieciowego do komunikacji z drukarką."
@@ -14132,6 +14262,10 @@ msgstr "Wyrównany prostoliniowy"
 msgid "Concentric"
 msgstr "Koncentryczny"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spirala do wewnątrz"
+
 msgid "Hilbert Curve"
 msgstr "Krzywa Hilberta"
 
@@ -14225,13 +14359,13 @@ msgstr "Kolejność wypełniania górnej powierzchni"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Kierunek wypełniania górnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n"
+"Kierunek wypełniania górnych powierzchni przy wzorze rozchodzącym się od środka (Koncentryczny, Spirala do wewnątrz, Struny Archimedesa, Spirala oktagramu).\n"
 "Na zewnątrz zaczyna od środka powierzchni, dzięki czemu nadmiar materiału jest wypychany ku krawędzi, gdzie jest najmniej widoczny. Do wewnątrz zaczyna od krawędzi i kończy ciasnymi łukami na środku.\n"
-"Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
+"Domyślny używa kolejności najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -14239,13 +14373,13 @@ msgstr "Kolejność wypełniania dolnej powierzchni"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Kierunek wypełniania dolnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n"
-"Do wewnątrz rozpoczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, do których ciasne łuki na środku mogą nie przylegać. Na zewnątrz zaczyna od środka, wypychając nadmiar materiału ku krawędzi.\n"
-"Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
+"Kierunek wypełniania dolnych powierzchni przy wzorze rozchodzącym się od środka (Koncentryczny, Spirala do wewnątrz, Struny Archimedesa, Spirala oktagramu).\n"
+"Do wewnątrz zaczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, na których ciasne łuki na środku mogą się nie przykleić. Na zewnątrz zaczyna od środka i wypycha nadmiar materiału ku krawędzi.\n"
+"Domyślny używa kolejności najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
 
 msgid "Internal solid infill pattern"
 msgstr "Wzór wewnętrznego pełnego wypełnienia"
@@ -14348,6 +14482,14 @@ msgstr "Przeciwnie"
 msgid "Clockwise"
 msgstr "Zgodnie"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Odległość do pręta"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Odległość pozioma czubka dyszy od dalszej krawędzi pręta. Używana do unikania kolizji przy druku wg obiektu."
+
 msgid "Height to rod"
 msgstr "Odległość od prowadnicy"
 
@@ -16600,6 +16742,20 @@ msgstr "Wykrywanie ścian nawisu"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Określ procentowy udział nawisów w stosunku do szerokości ekstruzji i użyj różnych prędkości do druku. Dla 100%% nawisów, zostanie użyta prędkość mostu."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Drukuj niepodparte ściany na końcu"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Pętle ścian leżące w całości w powietrzu są drukowane dopiero wtedy, gdy coś może je utrzymać:\n"
+"są wytłaczane po pozostałych ścianach swojej wyspy, począwszy od najbardziej wewnętrznej, niezależnie od kolejności ścian.\n"
+"Pętla, którą mogą zakotwiczyć tylko mosty tej warstwy, czeka na wydrukowanie tych mostów, natomiast pętla biegnąca wzdłuż podpartej ściany zachowuje swoje miejsce przed wypełnieniem, które potrzebuje jej jako zakotwiczenia."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Ściany zewnętrzne"
@@ -17050,6 +17206,39 @@ msgstr "Czyszczenie na pętlach"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Aby zminimalizować widoczność szwu w ekstruzji zamkniętej pętli, przed opuszczeniem pętli przez extruder wykonuje się mały ruch do wewnątrz."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Wycieranie do wewnątrz"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Dotyczy wyłącznie ścian zewnętrznych, w tym obrysów otworów. Podczas wycierania przesuwa gorącą dyszę w stronę wydrukowanych już ścian wewnętrznych, aby ograniczyć ponowne nagrzewanie świeżo wydrukowanego tworzywa i ślady szwu.\n"
+"\n"
+"Szczególnie przydatne przy wysokościach warstwy poniżej 0,1 mm, gdzie ślady wycierania są bardziej widoczne.\n"
+"\n"
+"Używa zwykłego wycierania, jeśli żadna sąsiednia ściana wewnętrzna nie została jeszcze wydrukowana (obszary o pojedynczej ścianie lub kolejność ścian Zewnętrzna/wewnętrzna) albo jeśli nie można znaleźć podpartej ścieżki do wewnątrz, na przykład w ciasnych narożnikach lub przerwach szwu."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Odległość wycierania do wewnątrz"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Odległość, o jaką ścieżka wycierania zostaje przesunięta od zewnętrznego obrysu, podana w milimetrach lub jako procent rzeczywistej szerokości ekstruzji zewnętrznej ściany.\n"
+"\n"
+"Na przykład 50% przesuwa ścieżkę o połowę szerokości zewnętrznej ściany. Skuteczne przesunięcie jest ograniczone zarówno rzeczywistą szerokością zewnętrznej ściany, jak i dostępnym odstępem do sąsiedniej ściany, więc wartości powyżej 100% lub równoważna odległość bezwzględna nie dają dodatkowego efektu. Ustaw 0, aby wyłączyć przesunięcie."
+
 msgid "Wipe before external loop"
 msgstr "Wycieranie przed zewnętrzną pętlą"
 
@@ -17326,8 +17515,9 @@ msgstr "Pobiera nowe narzędzie bez czekania, aż osiągnie temperaturę druku,
 msgid "No sparse layers (beta)"
 msgstr "Warstwy bez czyszczenia (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Jeśli włączone to wieża czyszcząca nie będzie drukowana na warstwach, na których nie ma zmian koloru. Na kolejnych warstwach ze zmianami koloru ekstruder zjedzie w dół, aby kontynuować czyszczenie na wieży. Pamiętaj, że to użytkownik musi upewnić się, że nie dojdzie do kolizji głowicy z wydrukiem."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Jeśli opcja jest włączona, wieża czyszcząca nie będzie drukowana na warstwach bez zmian narzędzia. Na warstwach ze zmianą narzędzia ekstruder zjedzie w dół, aby wydrukować wieżę czyszczącą, przez co wieża znajdzie się poniżej modelu, a głowica musi po nią sięgnąć w dół. Układy, w których doszłoby przy tym do kolizji z już wydrukowanym obiektem, są odrzucane. Nie działa przy płynnym timelapse ani przy wykrywaniu nalotu na dyszy, które wymagają wieży na każdej warstwie."
 
 msgid "Prime all printing extruders"
 msgstr "Wyczyść wszystkie używane ekstrudery"
@@ -17353,6 +17543,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cykliczna"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Kolejność cykliczna"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Własna sekwencja filamentów używana przez cykliczną kolejność zmian narzędzia, jako numery filamentów oddzielone przecinkami (np. \"3,2,1,4\").\n"
+"Każda warstwa drukuje swoje filamenty zgodnie z tą sekwencją; filamenty niewymienione są drukowane na końcu, w kolejności rosnącej.\n"
+"Pozostaw puste, aby przechodzić przez filamenty w kolejności rosnącej."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Zastosuj kolejność cykliczną do pierwszej warstwy"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Stosuje cykliczną kolejność zmian narzędzia również do pierwszej warstwy.\n"
+"Domyślnie jest to wyłączone, ponieważ pierwsza warstwa jest zamiast tego układana pod kątem najlepszej przyczepności do podłoża: filamenty drukujące małe, delikatne elementy pierwszej warstwy są drukowane na końcu, dzięki czemu kolejne zmiany narzędzia i przemieszczenia rzadziej odrywają te słabo zakotwiczone fragmenty. Ta kolejność pierwszej warstwy uwzględnia też własną sekwencję filamentów dla pierwszej warstwy, jeśli została ustawiona. Korzyść z kolejności cyklicznej (dodatkowe zmiany narzędzia dają każdej warstwie więcej czasu na ostygnięcie) nie dotyczy pierwszej warstwy, która jest drukowana wolno i gorąco dla przyczepności.\n"
+"Włącz tę opcję tylko wtedy, gdy potrzebujesz dokładnie tej samej sekwencji narzędzi na każdej warstwie, łącznie z pierwszą, kosztem tej optymalizacji przyczepności."
+
 msgid "Slice gap closing radius"
 msgstr "Promień zamykania szpar"
 
@@ -17362,9 +17580,6 @@ msgstr "Szpary mniejsze niż dwukrotność wartości parametru „promień zamyk
 msgid "Slicing Mode"
 msgstr "Tryb cięcia"
 
-msgid "Other"
-msgstr "Inne"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Użyj „Parzysto-nieparzysty” dla modeli samolotów 3DLabPrint. Użyj „Zamknij otwory” do zamknięcia wszystkich otworów w modelu."
 
@@ -18388,6 +18603,14 @@ msgstr "Brak sprawdzania"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Nie uruchamiaj żadnych testów poprawności, takich jak sprawdzanie konfliktów ścieżek G-code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Tryb ścisły"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Kończy działanie z kodem różnym od zera, gdy cięcie zgłosi niekrytyczne ostrzeżenie, które w przeciwnym razie trafiłoby tylko do dziennika, na przykład model wymagający podpór przy wyłączonych podporach. Używaj tego w CI lub w zautomatyzowanych procesach, które nigdy nie powinny wypuścić subtelnie wadliwego cięcia. Każde takie ostrzeżenie jest też wymienione ze stabilną klasą w tablicy `warnings` pliku result.json, zapisywanego wyłącznie w systemie Linux. Nie można łączyć z --no-check, które pomija kontrolę podpór."
+
 msgid "Normative check"
 msgstr "Kontrola normatywna"
 
@@ -18400,11 +18623,28 @@ msgstr "Informacje o modelu wyjściowym"
 msgid "This outputs the model’s information."
 msgstr "Wyświetl informacje o modelu."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Sprawdź siatkę (JSON na stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Wypisuje na stdout podsumowanie JSON każdego wczytanego obiektu, a następnie kończy działanie: jego prostopadłościany otaczające oraz ściany otoczki wypukłej, na których może spoczywać, wraz z ich normalnymi, polami i środkami. To właśnie spośród tych ścian wybierają opcje --ground-*. Czytelna maszynowo alternatywa dla --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Sprawdź malowanie (JSON na stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Wypisuje ustrukturyzowane podsumowanie JSON każdej malowanej warstwy (podpory, szew, kolor MMU, skóra fuzzy) już zapisanej we wczytanym modelu — liczba ścianek, pole powierzchni i prostopadłościan otaczający w układzie siatki dla każdego stanu — a następnie kończy działanie. Czytelna maszynowo alternatywa dla otwierania narzędzi malowania w interfejsie."
+
 msgid "Export Settings"
 msgstr "Ustawienia eksportu"
 
-msgid "This exports settings to a file."
-msgstr "Eksportuj ustawienia do pliku."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "To eksportuje ustawienia do pliku. Użyj -, aby zapisać je na stdout."
 
 msgid "Send progress to pipe"
 msgstr "Wyślij postęp do rury"
@@ -18460,6 +18700,30 @@ msgstr "Obróć wokół osi Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Kąt obrotu wokół osi Y w stopniach."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Oprzyj na największej ścianie"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Kładzie każdy obiekt na największej ścianie jego otoczki wypukłej i opuszcza go na stół. Spośród ścian o równej wielkości zachowywana jest ta, która już jest skierowana w dół. Obiekty bez ściany wystarczająco dużej, by na niej spocząć, pozostają bez zmian. Przekształcenia wykonywane są w kolejności z wiersza poleceń, więc obroty podane przed tą opcją są respektowane. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Oprzyj na ścianie wg normalnej"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Kładzie każdy obiekt na tej ścianie otoczki wypukłej, której normalna zewnętrzna jest najbliższa kierunkowi NX,NY,NZ, i opuszcza go na stół. Kierunek podawany jest we współrzędnych obiektu, które uwzględniają obroty podane przed tą opcją i pokrywają się z osiami stołu, o ile plik wejściowy nie obraca obiektu. Na przykład 1,0,0 stawia obiekt na jego stronie +X. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Oprzyj na ścianie w punkcie"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Kładzie każdy obiekt na tej ścianie otoczki wypukłej, która zawiera punkt X,Y,Z, i opuszcza go na stół. Punkt podawany jest we współrzędnych obiektu, które uwzględniają obroty podane przed tą opcją; --inspect-mesh podaje środki ścian w tych współrzędnych. Obiekty bez takiej ściany pozostają bez zmian, a przebieg kończy się niepowodzeniem, jeśli żaden obiekt jej nie ma. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację."
+
 msgid "Scale the model by a float factor."
 msgstr "Skaluj model przez czynnik zmiennoprzecinkowy"
 
@@ -21723,6 +21987,18 @@ msgstr "Tego działania nie będzie można cofnąć. Kontynuować?"
 msgid "Skipping objects."
 msgstr "Pomijanie obiektów."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Udział materiału"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Wysokość modelu"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Udział"
+
 msgid "Select Filament"
 msgstr "Wybierz filament"
 
@@ -22015,12 +22291,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Suszenie — osuszanie"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " maksymalna temperatura suszenia to "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Maksymalna temperatura suszenia dla %s to %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " minimalna temperatura suszenia to "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Minimalna temperatura suszenia dla %s to %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22466,6 +22744,97 @@ msgstr ""
 "Unikaj odkształceń\n"
 "Czy wiesz, że podczas drukowania filamentami podatnymi na odkształcenia, takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może zmniejszyć prawdopodobieństwo odkształceń?"
 
+#~ msgid "Other"
+#~ msgstr "Inne"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Lewy: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Prawy: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Maksymalna temperatura nie może przekroczyć "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Minimalna temperatura nie powinna być mniejsza niż "
+
+#~ msgid "up to"
+#~ msgstr "do"
+
+#~ msgid "above"
+#~ msgstr "powyżej"
+
+#~ msgid "from"
+#~ msgstr "od"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Pakiet konfiguracyjny:"
+
+#~ msgid " updated to "
+#~ msgstr " aktualizacja do "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Błąd grupowania: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " nie może być umieszczony w "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " maksymalna temperatura suszenia to "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " minimalna temperatura suszenia to "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "wymaga"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "nie włączony"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materiał nieopublikowany"
+
+#~ msgid "Select the language"
+#~ msgstr "Wybierz język"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Wybierz wtyczkę"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Kierunek wypełniania górnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n"
+#~ "Na zewnątrz zaczyna od środka powierzchni, dzięki czemu nadmiar materiału jest wypychany ku krawędzi, gdzie jest najmniej widoczny. Do wewnątrz zaczyna od krawędzi i kończy ciasnymi łukami na środku.\n"
+#~ "Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Kierunek wypełniania dolnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n"
+#~ "Do wewnątrz rozpoczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, do których ciasne łuki na środku mogą nie przylegać. Na zewnątrz zaczyna od środka, wypychając nadmiar materiału ku krawędzi.\n"
+#~ "Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Jeśli włączone to wieża czyszcząca nie będzie drukowana na warstwach, na których nie ma zmian koloru. Na kolejnych warstwach ze zmianami koloru ekstruder zjedzie w dół, aby kontynuować czyszczenie na wieży. Pamiętaj, że to użytkownik musi upewnić się, że nie dojdzie do kolizji głowicy z wydrukiem."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Eksportuj ustawienia do pliku."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Natywny podgląd na żywo w Wayland wymaga ujścia wideo GStreamer GTK. Zainstaluj wtyczkę gtksink dla GStreamer, a następnie uruchom ponownie OrcaSlicer."
@@ -25353,15 +25722,6 @@ msgstr ""
 #~ msgid "Low-temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature above 45℃."
 #~ msgstr "W ekstruzorze jest załadowany filament o niskiej temperaturze (PLA/PETG/TPU). Aby uniknąć zatkania ekstruzora, nie wolno ustawiać temperatury komory powyżej 45℃."
 
-#~ msgid ""
-#~ "Is it %s%% or %s %s?\n"
-#~ "YES for %s%%,\n"
-#~ "NO for %s %s."
-#~ msgstr ""
-#~ "Czy to %s%% czy %s %s?\n"
-#~ "TAK dla %s%%,\n"
-#~ "NIE dla %s %s."
-
 #~ msgid "Allow multiple materials on the same plate"
 #~ msgstr "Pozwól na kilka filamentów na tej samej płycie"
 
diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
index 0d9698d746..dd701176a7 100644
--- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
+++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-07-26 11:14-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -2128,7 +2128,7 @@ msgid ""
 "OrcaSlicer has attempted to recreate the configuration file.\n"
 "Please note, application settings will be lost, but printer profiles will not be affected."
 msgstr ""
-"O arquivo de configuração do OrcaSlicer pode estar corrompido e não pode ser analisado.\n"
+"O arquivo de configuração do OrcaSlicer pode estar corrompido e não pode ser processado.\n"
 "O OrcaSlicer tentou recriar o arquivo de configuração.\n"
 "Por favor, note que as configurações do aplicativo serão perdidas, mas os perfis de impressora não serão afetados."
 
@@ -2356,15 +2356,6 @@ msgstr "Há uma atualização disponível. Abra a caixa de diálogo do pacote de
 msgid "%s has been removed."
 msgstr "%s foi removido."
 
-msgid "Switching application language"
-msgstr "Alternando o idioma do aplicativo"
-
-msgid "Select the language"
-msgstr "Selecione o idioma"
-
-msgid "Language"
-msgstr "Idioma"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "Falha ao mudar o idioma do OrcaSlicer para %s."
@@ -3573,11 +3564,15 @@ msgstr "Recuar o filamento atual no Filament Track Switch"
 msgid "Switch track at Filament Track Switch"
 msgstr "Trocar de trilha no Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "A temperatura máxima não pode exceder "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "A temperatura máxima não pode exceder %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "A temperatura mínima não pode ser menor do que "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "A temperatura mínima não pode ser menor do que %d"
 
 msgid "Type to filter..."
 msgstr "Digite para filtrar…"
@@ -4443,6 +4438,15 @@ msgstr ""
 "A cópia do G-code temporário para o G-code de saída falhou. Talvez o cartão SD esteja travado pra escrita?\n"
 "Mensagem de erro: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Falha ao copiar o G-code temporário para o G-code de saída.\n"
+"Mensagem de erro: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "A cópia do G-code temporário para o G-code de saída falhou. Pode haver problema com o dispositivo de destino, por favor tente exportar novamente ou usar outro dispositivo. O G-code de saída corrompido está em %1%.tmp."
@@ -4743,6 +4747,9 @@ msgstr ""
 "Sim - Alterar essas configurações e ativar o modo espiral/vaso automaticamente\n"
 "Não - Cancelar ativação do modo espiral"
 
+msgid "N/A"
+msgstr "N/D"
+
 msgid "Printing"
 msgstr "Imprimindo"
 
@@ -5167,14 +5174,12 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Valor %s está fora do intervalo. O intervalo válido é de %d para %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"É %s%% ou %s %s?\n"
-"SIM para %s%%, \n"
-"NÃO para %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "É %s%% ou %s %s?"
+
+# AI Translated
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5196,24 +5201,18 @@ msgstr "Padrão inválido. Use N, N#K, ou uma lista separa por vírgulas com #K
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Formato inválido. Formato de vetor esperado: \"%1%\""
 
-msgid "N/A"
-msgstr "N/D"
-
 msgid "System agents"
 msgstr "Agentes do sistema"
 
-msgid "No plugin selected"
-msgstr "Nenhum plugin selecionado"
-
 msgid "Add plugin"
 msgstr "Adicionar plugin"
 
-msgid "Select plugin"
-msgstr "Selecionar plugin"
-
 msgid "Remove plugin"
 msgstr "Remover plugin"
 
+msgid "No plugin selected"
+msgstr "Nenhum plugin selecionado"
+
 msgid "Configure"
 msgstr "Configurar"
 
@@ -5468,14 +5467,20 @@ msgstr "Definir para Ideal"
 msgid "Regroup filament"
 msgstr "Reagrupar filamento"
 
-msgid "up to"
-msgstr "até"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "até %1% mm"
 
-msgid "above"
-msgstr "acima"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "acima de %1% mm"
 
-msgid "from"
-msgstr "de"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "de %1% a %2% mm"
 
 msgid "Usage"
 msgstr "Uso"
@@ -5833,7 +5838,7 @@ msgstr "Volume:"
 msgid "Size:"
 msgstr "Tamanho:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Foram encontrados conflitos de caminhos de G-code na camada %d, Z = %.2lfmm. Por favor, separe mais os objetos em conflito (%s <-> %s)."
 
@@ -6145,6 +6150,14 @@ msgstr "Salvar projeto como"
 msgid "Save current project as"
 msgstr "Salvar o projeto atual como"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publicar 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exportar um arquivo 3MF com as configurações selecionadas incorporadas"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importar 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -6671,7 +6684,7 @@ msgid "Failed to fetch model information from printer."
 msgstr "Falha ao obter informação do modelo da impressora."
 
 msgid "Failed to parse model information."
-msgstr "Falha ao analisar a informação do modelo."
+msgstr "Falha ao processar a informação do modelo."
 
 msgid "The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file."
 msgstr "O arquivo .gcode.3mf não contém dados de G-code. Por favor, fatie com Orca Slicer e exporte um novo arquivo .gcode.3mf."
@@ -7404,6 +7417,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inferior"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Esta configuração não especifica um tipo de recurso de plugin."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Esta configuração especifica um tipo de recurso de plugin não reconhecido: "
+
 msgid "Plugin Selection"
 msgstr "Seleção de plugins"
 
@@ -7941,6 +7962,14 @@ msgstr "Por favor, confirme se o G-code dentro dessas predefinições é seguro
 msgid "Customized Preset"
 msgstr "Predefinição Personalizada"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Algumas configurações publicadas não puderam ser aplicadas:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Alguns espaços de filamento foram alterados:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Os nomes dos componentes dentro do arquivo STEP não estão no formato UTF-8!"
 
@@ -8345,6 +8374,21 @@ msgstr "Salvar arquivo fatiado como:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "O arquivo %s foi enviado para o espaço de armazenamento da impressora e pode ser visualizado na impressora."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publicar arquivo 3MF como:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Falha ao exportar o arquivo 3MF publicado.\n"
+"Verifique se a pasta existe online ou se outros programas estão com o arquivo aberto."
+
+msgid "Publish"
+msgstr "Publicar"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "O tipo de bico não está configurado. Configure o bico e tente novamente."
 
@@ -8549,9 +8593,6 @@ msgstr "Você deseja continuar?"
 msgid "Language selection"
 msgstr "Seleção de idioma"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Alternando idioma do aplicativo enquanto algumas predefinições são modificadas."
-
 msgid "Asia-Pacific"
 msgstr "Ásia-Pacífico"
 
@@ -8618,7 +8659,7 @@ msgstr ""
 "\n"
 "Deseja baixar e instalar esta versão agora?\n"
 "\n"
-"Observação: o aplicativo pode precisar ser reiniciado após a instalação."
+"Nota: o aplicativo pode precisar ser reiniciado após a instalação."
 
 msgid "Download Network Plug-in"
 msgstr "Baixar Plug-in de Rede"
@@ -8656,6 +8697,9 @@ msgstr "Caminho da Instância Atual: "
 msgid "General"
 msgstr "Geral"
 
+msgid "Language"
+msgstr "Idioma"
+
 msgid "Metric"
 msgstr "Métrico"
 
@@ -9093,10 +9137,6 @@ msgstr "Ao mover o controle deslizante de camadas na pré-visualização fatiada
 msgid "Dimmed layer brightness"
 msgstr "Brilho das camadas escurecidas"
 
-# AI Translated
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9116,7 +9156,7 @@ msgid ""
 "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud."
 msgstr ""
 "Isso desativa todos os recursos da nuvem, incluindo a sincronização de perfis do Orca Cloud. Usuários que preferem trabalhar totalmente offline podem ativar esta opção.\n"
-"Observação: quando o Modo Furtivo está ativado, seus perfis de usuário não serão copiados para o Orca Cloud."
+"Nota: quando o Modo Furtivo está ativado, seus perfis de usuário não serão copiados para o Orca Cloud."
 
 msgid "Hide login side panel"
 msgstr "Ocultar painel lateral de autenticação"
@@ -9478,9 +9518,6 @@ msgstr "Ir para a página web de publicação de modelos"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Nota: A preparação pode levar vários minutos. Por favor, seja paciente."
 
-msgid "Publish"
-msgstr "Publicar"
-
 msgid "Publish was canceled"
 msgstr "Publicação cancelada"
 
@@ -9496,6 +9533,81 @@ msgstr "Enviando dados"
 msgid "Jump to webpage"
 msgstr "Ir para a página web"
 
+# AI Translated
+msgid "Material"
+msgstr "Material"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filamento misto"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Alguns filamentos mistos dependem de filamentos que não serão publicados:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filamento %d (misto)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% precisa de %2%, que não está ativado."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% precisa de %2%, cujo material não será publicado."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Para publicar um filamento misto, ative todos os filamentos que ele usa e escolha Publicação completa ou atenda ao seu requisito de Tipo."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Publicar mesmo assim"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publicar 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Selecione quais configurações serão publicadas no arquivo 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Documentação de Publicar 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Guia em vídeo de Publicar 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filamento misto - publicado por inteiro quando \"Ativar\" acima está selecionado"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publicar este filamento misto e ativar + publicar por inteiro seus filamentos componentes"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publicar este espaço de filamento no arquivo 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Publicação completa"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Incorporar o filamento inteiro deste espaço no arquivo 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrar não selecionados"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Salvar %s como"
@@ -9513,6 +9625,10 @@ msgstr "Copia para esta predefinição todos os valores herdados da predefiniç
 msgid "Detach from parent"
 msgstr "Separar do pai"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Salvar sem pai"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Predefinição única"
@@ -9701,7 +9817,6 @@ msgstr "A impressora falhou ao gerar a tabela de mapeamento automático do bico
 msgid "The current nozzle mapping may produce an extra %0.2f g of waste."
 msgstr "O mapeamento de bicos atual pode gerar um desperdício adicional de %0.2f g."
 
-# AI Translated
 #, c-format, boost-format
 msgid "Recommended filament arrangement saves %s->"
 msgstr "A disposição de filamento recomendada economiza %s->"
@@ -9760,7 +9875,6 @@ msgstr "Este processo determina os valores de fluxo dinâmico para melhorar a qu
 msgid "Internal"
 msgstr "Interno"
 
-# AI Translated
 #, c-format, boost-format
 msgid "%s space less than 20MB. Timelapse may not save properly. You can turn it off or"
 msgstr "%s com espaço inferior a 20MB. O timelapse pode não ser salvo corretamente. Você pode desativá-lo ou"
@@ -9768,15 +9882,12 @@ msgstr "%s com espaço inferior a 20MB. O timelapse pode não ser salvo corretam
 msgid "Clean up files"
 msgstr "Limpar arquivos"
 
-# AI Translated
 msgid "Low internal storage. This timelapse will overwrite the oldest video files."
 msgstr "Armazenamento interno baixo. Este timelapse substituirá os arquivos de vídeo mais antigos."
 
-# AI Translated
 msgid "Low external storage. This timelapse will overwrite the oldest video files."
 msgstr "Armazenamento externo baixo. Este timelapse substituirá os arquivos de vídeo mais antigos."
 
-# AI Translated
 msgid "Insufficient external storage for time-lapse photography. Connect to computer to delete files, or use a larger memory card."
 msgstr "Armazenamento externo insuficiente para fotografia time-lapse. Conecte ao computador para excluir arquivos ou use um cartão de memória maior."
 
@@ -9812,7 +9923,6 @@ msgstr "Atualizando informações dos hotends (%d/%d)."
 msgid "There are not enough available hotends currently."
 msgstr "Não há hotends disponíveis em quantidade suficiente no momento."
 
-# AI Translated
 msgid "Please complete the hotend rack setup and try again."
 msgstr "Por favor, conclua a configuração do rack de hotend e tente novamente."
 
@@ -9829,11 +9939,9 @@ msgstr "As informações reportadas sobre o hotend podem não ser confiáveis."
 msgid "The printer has no nozzle matching the slicing file (%s)."
 msgstr "A impressora não possui um bico compatível com o arquivo de fatiamento (%s)."
 
-# AI Translated
 msgid "Please install a matching nozzle in the hotend rack, or set the corresponding printer preset while slicing."
 msgstr "Por favor, instale um bico compatível no rack de hotend, ou defina a predefinição de impressora correspondente ao fatiar."
 
-# AI Translated
 msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing."
 msgstr "A cabeça da ferramenta e o rack de hotend estão cheios. Por favor, remova pelo menos um hotend antes de imprimir."
 
@@ -9859,24 +9967,19 @@ msgstr "ambas extrusoras"
 msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again."
 msgstr "A dureza do material atual (%s) excede a dureza de %s(%s). Verifique as configurações do bico ou do material e tente novamente."
 
-# AI Translated
 msgid "Your current firmware version cannot start this print job. Please update to the latest version and try again."
 msgstr "Sua versão atual do firmware não pode iniciar este trabalho de impressão. Atualize para a versão mais recente e tente novamente."
 
-# AI Translated
 #, c-format, boost-format
 msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). It may cause nozzle wear, leading to material leakage and unstable flow. Please exercise caution when using it."
 msgstr "A dureza do material atual (%s) excede a dureza de %s(%s). Isso pode causar desgaste do bico, levando a vazamento de material e fluxo instável. Tenha cuidado ao usá-lo."
 
-# AI Translated
 msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended."
 msgstr "Alguns filamentos podem alternar entre extrusoras durante a impressão. A calibração manual do valor K não pode ser aplicada durante toda a impressão, o que pode afetar a qualidade da impressão. Recomenda-se ativar a Calibração de Dinâmica de Fluxo."
 
-# AI Translated
 msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode."
-msgstr "Há filamento propenso a fiapos neste arquivo. Para a melhor qualidade de impressão, recomendamos alternar a detecção de aglomeração no bico para o modo Automático."
+msgstr "Há filamento propenso a criar fios neste arquivo. Para a melhor qualidade de impressão, recomendamos alternar a detecção de aglomeração no bico para o modo Automático."
 
-# AI Translated
 msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page."
 msgstr "Se a 'Calibração de Fluxo Dinâmico' estiver definida como Automático/Ativado, o sistema usará o valor de calibração manual ou o valor padrão e ignorará o processo de calibração de fluxo. Você pode realizar uma calibração de fluxo manual para filamento TPU na página 'Calibração'."
 
@@ -9983,7 +10086,6 @@ msgstr "Desative a calibração de fluxo dinâmico para habilitar o valor de flu
 msgid "This printer does not support printing all plates."
 msgstr "Esta impressora não suporta a imprimir todas as placas."
 
-# AI Translated
 #, c-format, boost-format
 msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support."
 msgstr "O firmware atual suporta no máximo %s materiais. Você pode reduzir o número de materiais para %s ou menos na Página de Preparação, ou tentar atualizar o firmware. Se ainda estiver restrito após a atualização, aguarde o suporte de firmware subsequente."
@@ -9991,11 +10093,9 @@ msgstr "O firmware atual suporta no máximo %s materiais. Você pode reduzir o n
 msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool."
 msgstr "O tipo de filamento externo é desconhecido ou não corresponde ao tipo de filamento no arquivo de fatiamento. Certifique-se de ter instalado o filamento correto no carretel externo."
 
-# AI Translated
 msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process."
 msgstr "TPU 90A/TPU 85A são muito macios. Recomenda-se realizar a calibração de fluxo manual na página 'Calibração'. Se a 'Calibração de Fluxo Dinâmico' estiver definida como automático/ativado, o sistema usará o valor de calibração anterior e ignorará o processo de calibração de fluxo."
 
-# AI Translated
 msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it."
 msgstr "O filamento no AMS pode ser insuficiente para esta impressão. Por favor, reabasteça ou substitua-o."
 
@@ -10072,7 +10172,7 @@ msgid "Failed to post ticket to server"
 msgstr "Falha ao enviar o ticket para o servidor"
 
 msgid "Failed to parse login report reason"
-msgstr "Falha ao analisar o motivo do relatório de login"
+msgstr "Falha ao processar o motivo do relatório de login"
 
 msgid "Receive login report timeout"
 msgstr "Limite de tempo excedido ao receber o relatório de login"
@@ -10168,11 +10268,9 @@ msgstr "Excluir esta predefinição"
 msgid "Search in preset"
 msgstr "Pesquisar nas predefinições"
 
-# AI Translated
 msgid "Synchronization of different extruder drives or nozzle volume types is not supported."
 msgstr "A sincronização de diferentes acionamentos de extrusora ou tipos de volume do bico não é suportada."
 
-# AI Translated
 msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder."
 msgstr "Sincroniza a modificação de parâmetros com os parâmetros correspondentes de outra extrusora."
 
@@ -10197,9 +10295,17 @@ msgstr "Uma torre de purga é necessária para a detecção de aglomeração. Po
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Habilitar a altura Z precisa e a torre de preparação juntas pode causar erros de fatiamento. Deseja habilitar a altura Z precisa mesmo assim?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "O timelapse suave precisa de uma torre de purga em todas as camadas, o que não é compatível com \"Sem camadas esparsas\". \"Sem camadas esparsas\" foi desativado."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Uma torre de purga é necessária para um timelapse suave. Pode haver falhas no modelo sem a torre de purga. Deseja ativar a torre de purga?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Sem camadas esparsas\" não é compatível com o timelapse suave, que precisa de uma torre de purga em todas as camadas. O timelapse foi alterado para o modo tradicional."
+
 msgid "Still print by object?"
 msgstr "Ainda imprimir por objeto?"
 
@@ -10242,7 +10348,7 @@ msgid "Are you sure you want to enable this option?"
 msgstr "Tem certeza de que deseja habilitar esta opção?"
 
 msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?"
-msgstr "Padrões de preenchimento são projetados para lidar com a rotação automaticamente para garantir a impressão adequada e atingir os efeitos pretendidos (Ex. Giroide, Cúbico). Girar o padrão de preenchimento esparso atual pode causar suporte insuficiente. Prossiga com cautela e verifique cuidadosamente se há possíveis problemas de impressão. Tem certeza de que deseja habilitar esta opção?"
+msgstr "Padrões de preenchimento são projetados para lidar com a rotação automaticamente para garantir a impressão adequada e atingir os efeitos pretendidos (ex.: Giroide, Cúbico). Girar o padrão de preenchimento esparso atual pode causar suporte insuficiente. Prossiga com cautela e verifique cuidadosamente se há possíveis problemas de impressão. Tem certeza de que deseja habilitar esta opção?"
 
 msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications."
 msgstr "Funcionalidade experimental: Retrair e cortar o filamento a uma distância maior durante mudanças de filamento para minimizar a purga. Embora possa reduzir notavelmente a purga, ele também pode elevar o risco de bolhas no bico ou outras complicações de impressão."
@@ -10405,7 +10511,6 @@ msgstr "G-code de mudança de tipo de extrusão"
 msgid "Post-processing Scripts"
 msgstr "Scripts de pós-processamento"
 
-# AI Translated
 msgid "Slicing Pipeline Plugin"
 msgstr "Plugin de Pipeline de Fatiamento"
 
@@ -10459,9 +10564,8 @@ msgstr "Temperatura da câmara de impressão"
 msgid "Chamber temperature"
 msgstr "Temperatura da câmara"
 
-# AI Translated
 msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start"
-msgstr "Temperatura da câmara alvo, e a temperatura mínima da câmara na qual a impressão deve começar"
+msgstr "Temperatura alvo da câmara, e a temperatura mínima da câmara na qual a impressão deve começar"
 
 msgid "Target"
 msgstr "Alvo"
@@ -10568,9 +10672,6 @@ msgstr "Perfis de processo compatíveis"
 msgid "Printable space"
 msgstr "Espaço de impressão"
 
-msgid "Printer Agent"
-msgstr "Agente de Impressora"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Selecione a implementação do agente de rede para comunicação com a impressora. Os agentes disponíveis são registrados na inicialização."
 
@@ -10699,7 +10800,6 @@ msgstr "Limites de altura da camada"
 msgid "Z-Hop"
 msgstr "Z-Hop"
 
-# AI Translated
 msgid ""
 "The Retract before wipe option could be only 100% when using the Firmware Retraction mode.\n"
 "\n"
@@ -10970,12 +11070,6 @@ msgstr "Número de extrusoras"
 msgid "Capabilities"
 msgstr "Capacidades"
 
-msgid "Left: "
-msgstr "Esquerda: "
-
-msgid "Right: "
-msgstr "Direita: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Mostrar todas as predefinições (incluindo as incompatíveis)"
 
@@ -11007,7 +11101,6 @@ msgstr "Se ativo, este diálogo pode ser usado para transferir valores seleciona
 msgid "One of the presets does not exist"
 msgstr "Uma das predefinições não existe"
 
-# AI Translated
 msgid "Compared presets has different printer technology"
 msgstr "As predefinições comparadas têm tecnologia de impressora diferente"
 
@@ -11342,9 +11435,8 @@ msgstr "Entrar"
 msgid "Login failed. Please try again."
 msgstr "Falha no login. Tente novamente."
 
-# AI Translated
 msgid "parse json failed"
-msgstr "falha ao analisar o json"
+msgstr "falha ao processar o json"
 
 msgid "[Action Required] "
 msgstr "[Ação Necessária] "
@@ -11535,7 +11627,6 @@ msgctxt "Keyboard Shortcut"
 msgid "Space"
 msgstr "Espaço"
 
-# AI Translated
 msgid "Open actions speed dial"
 msgstr "Abrir menu rápido de ações"
 
@@ -11617,11 +11708,9 @@ msgstr "informações de atualização da versão %s:"
 msgid "Network plug-in update"
 msgstr "Atualização do plug-in de rede"
 
-# AI Translated
 msgid "Click OK to update the Network plug-in now. If a file is in use, the update will be applied the next time Orca Slicer launches."
 msgstr "Clique em OK para atualizar o plug-in de Rede agora. Se um arquivo estiver em uso, a atualização será aplicada na próxima vez que o Orca Slicer for iniciado."
 
-# AI Translated
 msgid "A new Network plug-in is available. Do you want to install it?"
 msgstr "Um novo plug-in de Rede está disponível. Deseja instalá-lo?"
 
@@ -11681,7 +11770,6 @@ msgstr "Nome da impressora"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Onde encontrar o IP e o Código de Acesso da sua impressora?"
 
-# AI Translated
 msgid "How to trouble shooting"
 msgstr "Como solucionar problemas"
 
@@ -11803,15 +11891,22 @@ msgstr "Reparo cancelado"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Falha ao copiar o arquivo %1% para %2%: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Baixando novos perfis de fornecedor: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Pacote de configuração: %1% atualizado para %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Falha ao baixar os perfis de fornecedor: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Verifique as alterações não salvas antes de atualizar a configuração."
 
-msgid "Configuration package: "
-msgstr "Pacote de configuração: "
-
-msgid " updated to "
-msgstr " atualizado para "
-
 msgid "Open G-code file:"
 msgstr "Abrir arquivo G-code:"
 
@@ -11829,11 +11924,9 @@ msgstr "Objeto: %1%"
 msgid "Parts of the object at these heights may be too thin or the object may have a faulty mesh."
 msgstr "Partes do objeto nessas alturas podem ser muito finas, ou o objeto pode ter uma malha com falhas."
 
-# AI Translated
 msgid "Process change extrusion role G-code"
 msgstr "G-code de mudança de tipo de extrusão do processo"
 
-# AI Translated
 msgid "Filament change extrusion role G-code"
 msgstr "G-code de mudança de tipo de extrusão do filamento"
 
@@ -11873,11 +11966,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "O controle de entrada é suportado apenas pelo Klipper, RepRapFirmware e Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Erro de agrupamento: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Erro de agrupamento: %1% não pode ser colocado no bico esquerdo"
 
-msgid " can not be placed in the "
-msgstr " não pode ser colocado na "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Erro de agrupamento: %1% não pode ser colocado no bico direito"
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
 msgstr "Erro de agrupamento no modo manual. Por favor, verifique o número de bicos ou reagrupe."
@@ -11990,6 +12087,10 @@ msgstr "%1% está muito perto de outros, e colisões podem ocorrer."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% está muito alto, e ocorrerão colisões."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "A posição relativa do modelo e da torre de purga não atende aos requisitos do recurso \"Sem camadas esparsas\". Ajuste as posições relativas, reduza a altura do modelo ou desative \"Sem camadas esparsas\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " está muito perto da área de exclusão, pode haver colisões durante a impressão."
 
@@ -12008,7 +12109,6 @@ msgstr " está muito perto de uma área de exclusão, e colisões vão ocorrer.\
 msgid " is too close to clumping detection area, and collisions will be caused.\n"
 msgstr " está muito perto da área de detecção de aglomeração, e ocorrerão colisões.\n"
 
-# AI Translated
 msgid " is partially outside the printable area, and it cannot be printed.\n"
 msgstr " está parcialmente fora da área imprimível, e não pode ser impresso.\n"
 
@@ -12024,7 +12124,6 @@ msgstr "Se ainda assim desejar imprimir, você pode ativar a opção em Preferê
 msgid "No extrusions under current settings."
 msgstr "Nenhuma extrusão com as configurações atuais."
 
-# AI Translated
 msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed."
 msgstr "Um filamento misto com gradiente está em uso, mas 'Subcamada de cor mista' está desativado. O gradiente não será impresso."
 
@@ -12064,7 +12163,6 @@ msgstr "Você pode querer reduzir o tamanho do seu modelo ou alterar as configur
 msgid "Variable layer height is not supported with Organic supports."
 msgstr "A altura de camada variável não é suportada com suportes Orgânicos."
 
-# AI Translated
 msgid "The wipe tower filament cannot be a mixed filament."
 msgstr "O filamento da torre de purga não pode ser um filamento misto."
 
@@ -12333,6 +12431,9 @@ msgstr "Usar 3MF em vez de G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Ative esta opção se a impressora aceitar um arquivo 3MF como trabalho de impressão. Quando ativada, o OrcaSlicer envia o arquivo fatiado como .gcode.3mf, em vez de um arquivo .gcode comum."
 
+msgid "Printer Agent"
+msgstr "Agente de Impressora"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Selecione a implementação do agente de rede para comunicação com a impressora."
 
@@ -12701,7 +12802,6 @@ msgstr ""
 msgid "Internal bridge flow ratio"
 msgstr "Taxa de fluxo em ponte interna"
 
-# AI Translated
 msgid ""
 "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n"
 "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n"
@@ -13091,11 +13191,9 @@ msgstr ""
 "A geometria será decimada antes de detectar ângulos agudos. Este parâmetro indica o comprimento mínimo da divergência para a decimação.\n"
 "0 para desativar."
 
-# AI Translated
 msgid "Brim ears outer only"
-msgstr "Orelhas da borda apenas externas"
+msgstr "Apenas orelhas da borda externas"
 
-# AI Translated
 msgid "Generate mouse ears only on the outer contour of the model, excluding holes and enclosed sections."
 msgstr "Gera orelhas de rato apenas no contorno externo do modelo, excluindo furos e seções fechadas."
 
@@ -13123,7 +13221,6 @@ msgstr "Por objeto"
 msgid "Intra-layer order"
 msgstr "Ordem intra-camada"
 
-# AI Translated
 msgid ""
 "Order in which object instances are visited within a single layer, which controls how much travel is spent moving between them.\n"
 "\n"
@@ -13181,7 +13278,7 @@ msgid "mm/s² or %"
 msgstr "mm/s² ou %"
 
 msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration."
-msgstr "Aceleração das pontes. Se o valor for expresso como uma porcentagem (por exemplo, 50%), será calculado com base na aceleração da parede externa."
+msgstr "Aceleração das pontes. Se o valor for expresso como uma porcentagem (ex.: 50%), será calculado com base na aceleração da parede externa."
 
 msgid "Default filament profile"
 msgstr "Perfil de filamento padrão"
@@ -13381,6 +13478,10 @@ msgstr "Retilíneo alinhado"
 msgid "Concentric"
 msgstr "Concêntrico"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Espiral interna"
+
 msgid "Hilbert Curve"
 msgstr "Curva de Hilbert"
 
@@ -13460,26 +13561,28 @@ msgstr ""
 msgid "Top surface fill order"
 msgstr "Ordem de preenchimento da superfície superior"
 
+# AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n"
-"Para fora começa no centro da superfície, de modo que qualquer excesso de material seja empurrado em direção à borda, onde é menos visível. Para dentro começa na borda e termina com as curvas fechadas no centro.\n"
-"O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção."
+"Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Espiral interna, Cordas Arquimedeanas, Espiral de Octagrama).\n"
+"Para Fora começa no centro da superfície, de modo que o material excedente é empurrado para a borda, onde fica menos visível. Para Dentro começa na borda e termina com as curvas fechadas do centro.\n"
+"Padrão usa a ordenação pelo caminho mais curto, que pode seguir em qualquer uma das direções."
 
 msgid "Bottom surface fill order"
 msgstr "Ordem de preenchimento da superfície inferior"
 
+# AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n"
-"Para dentro começa cada superfície com as curvas externas mais largas, o que melhora a aderência da primeira camada em mesas onde as curvas fechadas no centro podem não aderir. Para fora começa no centro, empurrando qualquer excesso de material em direção à borda.\n"
-"O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção."
+"Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Espiral interna, Cordas Arquimedeanas, Espiral de Octagrama).\n"
+"Para Dentro começa cada superfície pelas curvas externas mais amplas, o que melhora a adesão da primeira camada em mesas nas quais as curvas fechadas do centro podem não grudar. Para Fora começa no centro, empurrando o material excedente para a borda.\n"
+"Padrão usa a ordenação pelo caminho mais curto, que pode seguir em qualquer uma das direções."
 
 msgid "Internal solid infill pattern"
 msgstr "Padrão de preenchimento sólido interno"
@@ -13578,6 +13681,14 @@ msgstr "Anti-horário"
 msgid "Clockwise"
 msgstr "Horário"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Distância até a haste"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Distância horizontal da ponta do bico até a borda mais distante da haste. Usada para evitar colisões na impressão por objeto."
+
 msgid "Height to rod"
 msgstr "Altura até a haste"
 
@@ -13761,7 +13872,6 @@ msgstr "Tempo da camada"
 msgid "The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time."
 msgstr "A ventoinha de resfriamento de peças será ativado para camadas cujo tempo estimado seja mais curto que esse valor. A velocidade da ventoinha é interpolada entre as velocidades mínima e máxima da ventoinha de acordo com o tempo de impressão da camada."
 
-# AI Translated
 msgctxt "second"
 msgid "s"
 msgstr "s"
@@ -14068,61 +14178,47 @@ msgstr "Material de suporte"
 msgid "Support material is commonly used to print supports and support interfaces."
 msgstr "O material de suporte é comumente usado para imprimir suportes e interfaces de suporte."
 
-# AI Translated
 msgid "Is mixed filament"
 msgstr "É filamento misto"
 
-# AI Translated
 msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments"
 msgstr "Define se este slot de filamento é um filamento misto composto por vários filamentos físicos"
 
-# AI Translated
 msgid "Mixed filament components"
 msgstr "Componentes do filamento misto"
 
-# AI Translated
 msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\""
 msgstr "Índices (começando em 1) dos filamentos componentes, separados por vírgulas; ex.: \"1,3\""
 
-# AI Translated
 msgid "Mixed filament sublayer ratios"
 msgstr "Proporções de subcamada do filamento misto"
 
-# AI Translated
 msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\""
 msgstr "Valores de proporção separados por vírgulas cuja soma seja 1.0; ex.: \"0.7,0.3\""
 
-# AI Translated
 msgid "Mixed filament gradient"
 msgstr "Gradiente do filamento misto"
 
-# AI Translated
 msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers."
-msgstr "Ativa o modo de gradiente na direção Z para as subcamadas do filamento misto. Quando ativado, as proporções das subcamadas variam linearmente ao longo das camadas."
+msgstr "Ativa o modo de gradiente na direção Z para as subcamadas do filamento misto. Quando ativo, as proporções das subcamadas variam linearmente ao longo das camadas."
 
-# AI Translated
 msgid "Mixed filament gradient range"
 msgstr "Faixa do gradiente do filamento misto"
 
-# AI Translated
 msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%."
 msgstr "Proporções inicial e final do primeiro componente no modo de gradiente. Par separado por vírgula; ex.: \"0.10,0.90\" significa de 10% a 90%."
 
-# AI Translated
 msgid "Mixed filament gradient curve"
 msgstr "Curva do gradiente do filamento misto"
 
-# AI Translated
 msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead."
-msgstr "Curva personalizada opcional, no estilo do Photoshop, que mapeia o progresso em Z para a proporção do primeiro componente. Codificada como pontos de controle separados por barras verticais, no formato \"x,y\" (legado) ou \"x,y,m_in,m_out\" quando é necessário substituir a tangente (um valor vazio ou \"nan\" usa o padrão PCHIP). x está em [0,1]; y é limitado à faixa de proporção configurada; ex.: \"0,0.15|0.5,0.50|1,0.85\". Quando vazio, o gradient_range linear é usado."
+msgstr "Curva personalizada opcional no estilo do Photoshop, mapeando o progresso em Z para a proporção do primeiro componente. Codificada como pontos de controle separados por barras verticais, no formato \"x,y\" (legado) ou \"x,y,m_in,m_out\" quando é necessário substituir a tangente (um valor vazio ou \"nan\" usa o padrão PCHIP). X em [0,1]; Y é limitado à faixa de proporção configurada; ex.: \"0,0.15|0.5,0.50|1,0.85\". Quando vazio, o gradient_range linear é usado no lugar."
 
-# AI Translated
 msgid "Mixed filament per-part gradient"
 msgstr "Gradiente por peça do filamento misto"
 
-# AI Translated
 msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range."
-msgstr "Quando o modo de gradiente está ativado, aplica o gradiente a cada peça de uma montagem de forma independente, em vez de tratar toda a montagem como uma única faixa Z."
+msgstr "Quando o modo de gradiente está ativado, aplica o gradiente a cada peça de uma montagem de forma independente em vez de tratar toda a montagem como uma única faixa Z."
 
 msgid "Filament printable"
 msgstr "Filamento imprimível"
@@ -14213,7 +14309,7 @@ msgid "Insert solid layers"
 msgstr "Inserir camadas sólidas"
 
 msgid "Insert solid infill at specific layers. Use N to insert every Nth layer, N#K to insert K consecutive solid layers every N layers (K is optional, e.g. '5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at explicit layers. Layers are 1-based."
-msgstr "Insere preenchimento sólido em camadas específicas. Use N para inserir a cada enésima camada, N#K para inserir K camadas sólidas consecutivas a cada enésima camada (K é opcional, ou seja, '5#' é igual a '5#1'), ou uma lista separada por vírgulas (Ex. 1,7,9) para inserir em camadas esplícitas. Camadas são baseadas em 1."
+msgstr "Insere preenchimento sólido em camadas específicas. Use N para inserir a cada enésima camada, N#K para inserir K camadas sólidas consecutivas a cada enésima camada (K é opcional, ex.: '5#' é igual a '5#1'), ou uma lista separada por vírgulas (Ex. 1,7,9) para inserir em camadas esplícitas. Camadas são baseadas em 1."
 
 msgid "Fill Multiline"
 msgstr "Multilinhas de Preenchimento"
@@ -14291,11 +14387,9 @@ msgstr "TPMS-FK"
 msgid "Gyroid"
 msgstr "Giroide"
 
-# AI Translated
 msgid "Sparse infill smooth factor"
 msgstr "Fator de suavização do preenchimento esparso"
 
-# AI Translated
 msgid "Controls how strongly sparse infill corners are rounded. 0% keeps the original sharp path, while 100% produces the largest possible curves between adjacent infill lines."
 msgstr "Controla o quanto os cantos do preenchimento esparso são arredondados. 0% mantém o trajeto original com cantos vivos, enquanto 100% produz as maiores curvas possíveis entre linhas de preenchimento adjacentes."
 
@@ -14309,10 +14403,10 @@ msgid "Acceleration of inner walls."
 msgstr "Aceleração das paredes internas."
 
 msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration."
-msgstr "Aceleração do preenchimento esparso. Se o valor for expresso como uma porcentagem (por exemplo, 100%), será calculado com base na aceleração padrão."
+msgstr "Aceleração do preenchimento esparso. Se o valor for expresso como uma porcentagem (ex.: 100%), será calculado com base na aceleração padrão."
 
 msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration."
-msgstr "Aceleração do preenchimento sólido interno. Se o valor for expresso como uma porcentagem (por exemplo, 100%), será calculado com base na aceleração padrão."
+msgstr "Aceleração do preenchimento sólido interno. Se o valor for expresso como uma porcentagem (ex.: 100%), será calculado com base na aceleração padrão."
 
 msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion."
 msgstr "Esta é a aceleração para a primeira camada. Usar aceleração limitada melhorar a adesão à placa de impressão."
@@ -14416,7 +14510,7 @@ msgid ""
 "Only available when \"No cooling for the first\" is 0.\n"
 "Set to -1 to disable it."
 msgstr ""
-"Define uma velocidade exata da ventoinha para a primeira camada, substituindo todas as outras configurações de resfriamento. Útil para proteger peças impressas em 3D da cabeça da ferramenta (por exemplo, dutos ABS/ASA no estilo Voron) de uma mesa aquecida. Uma pequena quantidade de fluxo de ar resfria os dutos, sem usar o resfriamento total que pode, em certas condições, prejudicar a aderência da primeira camada.\n"
+"Define uma velocidade exata da ventoinha para a primeira camada, substituindo todas as outras configurações de resfriamento. Útil para proteger peças impressas em 3D da cabeça da ferramenta (ex.: dutos ABS/ASA no estilo Voron) de uma mesa aquecida. Uma pequena quantidade de fluxo de ar resfria os dutos, sem usar o resfriamento total que pode, em certas condições, prejudicar a aderência da primeira camada.\n"
 "A partir da segunda camada, o resfriamento normal é retomado.\n"
 "Se \"Velocidade total da ventoinha na camada\" também estiver definida, a ventoinha aumenta suavemente deste valor na primeira camada até o seu alvo na camada escolhida.\n"
 "Disponível apenas quando \"Sem resfriamento nas primeiras\" é 0.\n"
@@ -14787,7 +14881,7 @@ msgid ""
 "Set to 0 to deactivate."
 msgstr ""
 "Algumas ventoinhas de resfriamento de componentes não conseguem iniciar a rotação quando comandadas abaixo de um determinado ciclo de trabalho PWM. Quando definido acima de 0, qualquer comando de ventoinha de resfriamento de componentes diferente de zero será elevado para pelo menos essa porcentagem, para que a ventoinha inicie de forma confiável. Um comando de ventoinha de 0 (ventoinha desligada) é sempre atendido exatamente. Essa limitação é aplicada após cada outro cálculo da ventoinha (rampa da primeira camada, interpolação do tempo da camada, substituições de saliência/ponte/interface de suporte/alisamento), para que o dimensionamento ainda opere dentro do intervalo [este valor, 100%].\n"
-"Se o seu firmware já desativa a ventoinha abaixo de um limite (por exemplo, [fan] off_below: 0.10 do Klipper desliga a ventoinha sempre que o ciclo de trabalho comandado for inferior a 10%), esta opção e o limite do firmware devem idealmente ser definidos com o mesmo valor. A correspondência entre eles (por exemplo, off_below: 0.10 no Klipper e 10% aqui) garante que o fatiador nunca emita um valor diferente de zero que o firmware emitiria a velocidade cai silenciosamente e a ventoinha nunca recebe um valor abaixo daquele que você sabe que ela pode realmente atingir.\n"
+"Se o seu firmware já desativa a ventoinha abaixo de um limite (por exemplo, [fan] off_below: 0.10 do Klipper desliga a ventoinha sempre que o ciclo de trabalho comandado for inferior a 10%), esta opção e o limite do firmware devem idealmente ser definidos com o mesmo valor. A correspondência entre eles (ex.: off_below: 0.10 no Klipper e 10% aqui) garante que o fatiador nunca emita um valor diferente de zero que o firmware emitiria a velocidade cai silenciosamente e a ventoinha nunca recebe um valor abaixo daquele que você sabe que ela pode realmente atingir.\n"
 "Defina como 0 para desativar."
 
 msgid "Time cost"
@@ -14834,13 +14928,11 @@ msgstr "Com que tipo de G-code a impressora é compatível."
 msgid "Klipper"
 msgstr "Klipper"
 
-# AI Translated
 msgid "Skip G-code config block"
 msgstr "Omitir o bloco de configuração do G-code"
 
-# AI Translated
 msgid "Do not write the CONFIG_BLOCK (slicer configuration key/value pairs) into the G-code file. This can help with printers whose firmware crashes when parsing these comment lines (e.g. Anycubic go-klipper). Note: the G-code file will no longer contain slicer settings, so importing it back into OrcaSlicer will not restore the configuration."
-msgstr "Não grava o CONFIG_BLOCK (os pares chave/valor da configuração do fatiador) no arquivo G-code. Isso pode ajudar com impressoras cujo firmware trava ao interpretar essas linhas de comentário (por exemplo, Anycubic go-klipper). Observação: o arquivo G-code não conterá mais as configurações do fatiador, então importá-lo de volta no OrcaSlicer não restaurará a configuração."
+msgstr "Não grava o CONFIG_BLOCK (os pares chave/valor da configuração do fatiador) no arquivo G-code. Isso pode ajudar com impressoras cujo firmware trava ao interpretar essas linhas de comentário (ex.: Anycubic go-klipper). Nota: o arquivo G-code não conterá mais as configurações do fatiador, então importá-lo de volta no OrcaSlicer não restaurará a configuração."
 
 msgid "Pellet Modded Printer"
 msgstr "Impressora Modificada para Pellets"
@@ -14888,13 +14980,13 @@ msgid "Sparse infill rotation template"
 msgstr "Gabarito de rotação de preenchimento esparso"
 
 msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care."
-msgstr "Gira a direção do preenchimento esparso por camada usando um gabarito de ângulos. Insira graus separados por vírgula (por exemplo, '0, 30, 60, 90'). Os ângulos são aplicados em ordem por camada e repetidos quando a lista termina. Sintaxe avançada suportada: '+5' gira +5° a cada camada; '+5#5' gira +5° a cada 5 camadas. Consulte a Wiki para obter detalhes. Quando um modelo é definido, a configuração padrão de direção do preenchimento é ignorada. Observação: alguns padrões de preenchimento (por exemplo, Giróide) tem seu próprio controle de rotação, use com cuidado."
+msgstr "Gira a direção do preenchimento esparso por camada usando um gabarito de ângulos. Insira graus separados por vírgula (ex.: '0,30,60,90'). Os ângulos são aplicados em ordem por camada e repetidos quando a lista termina. Sintaxe avançada suportada: '+5' gira +5° a cada camada; '+5#5' gira +5° a cada 5 camadas. Consulte a Wiki para obter detalhes. Quando um modelo é definido, a configuração padrão de direção do preenchimento é ignorada. Nota: alguns padrões de preenchimento (ex.: Giróide) tem seu próprio controle de rotação, use com cuidado."
 
 msgid "Solid infill rotation template"
 msgstr "Gabarito de rotação de preenchimento sólido"
 
 msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation."
-msgstr "Este parâmetro adiciona uma rotação da direção do preenchimento sólido a cada camada, de acordo com o gabarito especificado. O gabarito é uma lista de ângulos em graus separados por vírgulas, por exemplo, '0,90'. O primeiro ângulo é aplicado à primeira camada, o segundo ângulo à segunda camada e assim por diante. Se houver mais camadas do que ângulos, os ângulos serão repetidos. Observe que nem todos os padrões de preenchimento sólido suportam rotação."
+msgstr "Este parâmetro adiciona uma rotação da direção do preenchimento sólido a cada camada, de acordo com o gabarito especificado. O gabarito é uma lista de ângulos em graus separados por vírgulas, como '0,90'. O primeiro ângulo é aplicado à primeira camada, o segundo ângulo à segunda camada e assim por diante. Se houver mais camadas do que ângulos, os ângulos serão repetidos. Observe que nem todos os padrões de preenchimento sólido suportam rotação."
 
 msgid "Skeleton infill density"
 msgstr "Densidade de preenchimento de esqueleto"
@@ -15360,7 +15452,6 @@ msgstr "Força máxima do eixo Y"
 msgid "The allowed maximum output force of Y axis"
 msgstr "A força máxima de saída permitida do eixo Y"
 
-# AI Translated
 msgctxt "Newton"
 msgid "N"
 msgstr "N"
@@ -15371,7 +15462,6 @@ msgstr "Massa da mesa do eixo Y"
 msgid "The machine bed mass load of Y axis"
 msgstr "A carga de massa da mesa do equipamento no eixo Y"
 
-# AI Translated
 msgctxt "gram"
 msgid "g"
 msgstr "g"
@@ -15722,6 +15812,20 @@ msgstr "Detectar paredes salientes"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Isso detecta a porcentagem relativa de saliência em relação a largura do perímetro e usa uma velocidade diferente de impressão. Para saliências 100%%, a velocidade de ponte é usada."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Imprimir por último as paredes sem suporte"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Voltas de parede que ficam inteiramente no ar só são impressas quando algo pode sustentá-las:\n"
+"elas são extrudadas depois das demais paredes da sua ilha, da mais interna para fora, seja qual for a ordem das paredes.\n"
+"Uma volta que somente as pontes desta camada conseguem ancorar aguarda até que essas pontes sejam impressas, enquanto uma volta que corre ao lado de uma parede apoiada mantém seu lugar antes do preenchimento, que precisa dela como ancoragem."
+
 msgid "Outer walls"
 msgstr "Paredes externas"
 
@@ -15896,7 +16000,7 @@ msgid "Z-hop height"
 msgstr "Altura de Z-hop"
 
 msgid "Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift Z can prevent stringing."
-msgstr "Sempre que há uma retração, o bico é levantado um pouco para criar folga entre o bico e a impressão. Isso evita que o bico atinja a impressão ao se mover. Usar linhas em espiral para levantar Z pode evitar stringing."
+msgstr "Sempre que há uma retração, o bico é levantado um pouco para criar folga entre o bico e a impressão. Isso evita que o bico atinja a impressão ao se mover. Usar linhas em espiral para levantar Z pode evitar criação de fios."
 
 msgid "Z-hop lower boundary"
 msgstr "Limite inferior do Z-hop"
@@ -15977,7 +16081,7 @@ msgid "Has filament switcher"
 msgstr "Tem trocador de filamentos"
 
 msgid "Printer has a filament switcher hardware (e.g., AMS)."
-msgstr "A impressora tem um sistema de troca de filamentos (Ex.: AMS)."
+msgstr "A impressora tem um sistema de troca de filamentos (ex.: AMS)."
 
 msgid "Extra length on restart"
 msgstr "Comprimento extra na retração"
@@ -16094,7 +16198,7 @@ msgid "Scarf joint speed"
 msgstr "Velocidade da costura em bisel"
 
 msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%."
-msgstr "Esta opção define a velocidade de impressão para as costuras em bisel. É recomendável imprimir as costuras em bisel em uma velocidade baixa (menor que 100 mm/s). Também é aconselhável habilitar 'Suavização da taxa de extrusão' se a velocidade definida variar significativamente da velocidade das paredes externas ou internas. Se a velocidade especificada aqui for maior que a velocidade das paredes externas ou internas, a impressora utilizará a mais lenta das duas velocidades. Quando especificado como uma porcentagem (por exemplo, 80%), a velocidade é calculada com base na velocidade do perímetro externo ou interna respectiva. O valor padrão é definido como 100%."
+msgstr "Esta opção define a velocidade de impressão para as costuras em bisel. É recomendável imprimir as costuras em bisel em uma velocidade baixa (menor que 100 mm/s). Também é aconselhável habilitar 'Suavização da taxa de extrusão' se a velocidade definida variar significativamente da velocidade das paredes externas ou internas. Se a velocidade especificada aqui for maior que a velocidade das paredes externas ou internas, a impressora utilizará a mais lenta das duas velocidades. Quando especificado como uma porcentagem (ex.: 80%), a velocidade é calculada com base na velocidade do perímetro externo ou interna respectiva. O valor padrão é definido como 100%."
 
 msgid "Scarf joint flow ratio"
 msgstr "Taxa de fluxo da costura em bisel"
@@ -16148,6 +16252,39 @@ msgstr "Limpeza em voltas"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Para minimizar a visibilidade da costura em uma extrusão de volta fechada, é executado um pequeno movimento para dentro antes que a extrusora saia da volta."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Limpeza para dentro"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Aplica-se apenas às paredes externas, incluindo os contornos dos furos. Durante a limpeza, move o bico quente em direção às paredes internas já impressas, para reduzir o reaquecimento do plástico recém-depositado e as marcas de costura.\n"
+"\n"
+"Especialmente útil em alturas de camada abaixo de 0,1 mm, nas quais as marcas de limpeza ficam mais visíveis.\n"
+"\n"
+"Usa a limpeza normal se nenhuma parede interna adjacente já tiver sido impressa (áreas de parede única ou ordem de paredes Exterior/Interior) ou se nenhum caminho apoiado para dentro puder ser encontrado, por exemplo em cantos fechados ou em falhas da costura."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Distância de limpeza para dentro"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Distância pela qual o caminho de limpeza é deslocado para longe do perímetro externo, indicada em milímetros ou como porcentagem da largura de extrusão real da parede externa.\n"
+"\n"
+"Por exemplo, 50% desloca o caminho pela metade da largura da parede externa. O deslocamento efetivo é limitado tanto pela largura real da parede externa quanto pelo espaço disponível até a parede adjacente, de modo que valores acima de 100% ou uma distância absoluta equivalente não têm efeito adicional. Defina 0 para desativar o deslocamento."
+
 msgid "Wipe before external loop"
 msgstr "Limpeza antes da volta externa"
 
@@ -16164,7 +16301,7 @@ msgid "Wipe speed"
 msgstr "Velocidade de limpeza"
 
 msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%."
-msgstr "A velocidade de limpeza é determinada pela velocidade especificada nesta configuração. Se o valor for expresso como uma porcentagem (por exemplo, 80%), será calculado com base na configuração de velocidade de deslocamento acima. O valor padrão para este parâmetro é 80%."
+msgstr "A velocidade de limpeza é determinada pela velocidade especificada nesta configuração. Se o valor for expresso como uma porcentagem (ex.: 80%), será calculado com base na configuração de velocidade de deslocamento acima. O valor padrão para este parâmetro é 80%."
 
 msgid "Skirt distance"
 msgstr "Distância da saia"
@@ -16202,7 +16339,7 @@ msgstr ""
 "Um escudo de ar é útil para proteger uma impressão ABS ou ASA de deformações e desprendimento da mesa de impressão devido à corrente de ar. Geralmente, ele é necessário apenas com impressoras de estrutura aberta, ou seja, sem um gabinete.\n"
 "\n"
 "Habilitado = a saia é tão alta quanto o objeto impresso mais alto. Caso contrário, 'Altura da saia' é usada.\n"
-"Observação: com o escudo de ar ativo, a saia será impressa na distância da saia do objeto. Portanto, se as bordas estiverem ativas, ela pode se cruzar com elas. Para evitar isso, aumente o valor da distância da saia.\n"
+"Nota: com o escudo de ar ativo, a saia será impressa na distância da saia do objeto. Portanto, se as bordas estiverem ativas, ela pode se cruzar com elas. Para evitar isso, aumente o valor da distância da saia.\n"
 
 msgid "Enabled"
 msgstr "Ativado"
@@ -16343,10 +16480,10 @@ msgid "Preheat steps"
 msgstr "Passos de pré-aquecimento"
 
 msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1."
-msgstr "Insire múltiplos comandos de pré-aquecimento (por exemplo, M104.1). Útil apenas para Prusa XL. Para outras impressoras, defina como 1."
+msgstr "Insire múltiplos comandos de pré-aquecimento (ex.: M104.1). Útil apenas para Prusa XL. Para outras impressoras, defina como 1."
 
 msgid "G-code written at the very top of the output file, before any other content. Useful for adding metadata that printer firmware reads from the first lines of the file (e.g. estimated print time, filament usage). Supports placeholders like {print_time_sec} and {used_filament_length}."
-msgstr "Código G escrito no início do arquivo de saída, antes de qualquer outro conteúdo. Útil para adicionar metadados que o firmware da impressora lê das primeiras linhas do arquivo (por exemplo, tempo estimado de impressão, consumo de filamento). Suporta marcadores como {print_time_sec} e {used_filament_length}."
+msgstr "Código G escrito no início do arquivo de saída, antes de qualquer outro conteúdo. Útil para adicionar metadados que o firmware da impressora lê das primeiras linhas do arquivo (ex.: tempo estimado de impressão, consumo de filamento). Suporta marcadores como {print_time_sec} e {used_filament_length}."
 
 msgid "Start G-code"
 msgstr "G-code Inicial"
@@ -16367,7 +16504,7 @@ msgid "Manual Filament Change"
 msgstr "Troca Manual de Filamento"
 
 msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action."
-msgstr "Ative esta opção para omitir o G-code de troca de filamento personalizado apenas no início da impressão. O comando de troca de ferramenta (por exemplo, T0) será ignorado durante toda a impressão. Isso é útil para impressão manual de vários materiais, onde usamos M600/PAUSE para acionar a ação de troca manual de filamento."
+msgstr "Ative esta opção para omitir o G-code de troca de filamento personalizado apenas no início da impressão. O comando de troca de ferramenta (ex.: T0) será ignorado durante toda a impressão. Isso é útil para impressão manual de vários materiais, onde usamos M600/PAUSE para acionar a ação de troca manual de filamento."
 
 msgid "Wipe tower type"
 msgstr "Tipo de torre de purga"
@@ -16405,8 +16542,9 @@ msgstr "Pega a nova ferramenta sem esperar que ela atinja a temperatura de impre
 msgid "No sparse layers (beta)"
 msgstr "Sem camadas esparsas (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Se ativado, a torre de purga não será impressa em camadas sem troca de ferramenta. Em camadas com uma troca de ferramenta, a extrusora deslocará para baixo para imprimir a torre de purga. O usuário é responsável por garantir que não haja colisão com a impressão."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Se ativado, a torre de purga não será impressa nas camadas sem mudanças de ferramenta. Nas camadas com mudança de ferramenta, a extrusora descerá para imprimir a torre de purga, de modo que a torre fica abaixo do modelo e a cabeça da ferramenta precisa descer até ela. Disposições em que isso colidiria com um objeto já impresso são rejeitadas. Não tem efeito com o timelapse suave nem com a detecção de aglomeração no bico, que precisam de uma torre em todas as camadas."
 
 msgid "Prime all printing extruders"
 msgstr "Preparar todas as extrusoras de impressão"
@@ -16429,6 +16567,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cíclico"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Ordem cíclica"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Sequência de filamentos personalizada usada pela ordenação cíclica de mudanças de ferramenta, como números de filamento separados por vírgulas (p. ex. \"3,2,1,4\").\n"
+"Cada camada imprime seus filamentos seguindo esta sequência; os filamentos não listados são impressos por último, em ordem crescente.\n"
+"Deixe em branco para percorrer os filamentos em ordem crescente."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Aplicar a ordem cíclica à primeira camada"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Aplica a ordem cíclica de mudanças de ferramenta também à primeira camada.\n"
+"Por padrão isso fica desativado, porque a primeira camada é, em vez disso, ordenada para a melhor adesão à mesa: os filamentos que imprimem detalhes pequenos e frágeis da primeira camada são impressos por último, de modo que as mudanças de ferramenta e os deslocamentos seguintes têm menos chance de soltar essas partes fracamente ancoradas. Essa ordem da primeira camada também respeita uma sequência de filamentos personalizada para a primeira camada, quando definida. O benefício da ordem cíclica (as mudanças de ferramenta extras dão a cada camada mais tempo para esfriar) não se aplica à primeira camada, que é impressa devagar e quente para favorecer a adesão.\n"
+"Ative isto apenas se você precisar exatamente da mesma sequência de ferramentas em todas as camadas, inclusive a primeira, ao custo dessa otimização de adesão."
+
 msgid "Slice gap closing radius"
 msgstr "Raio de fechamento de vãos de fatiamento"
 
@@ -16438,9 +16604,6 @@ msgstr "Frestas menores que 2x o vão de fatiamento serão preenchidas durante o
 msgid "Slicing Mode"
 msgstr "Modo de Fatiamento"
 
-msgid "Other"
-msgstr "Outro"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Usar \"Par-impar\" para modelos de avião 3DLabPrint. Use \"Fechar buracos\" para fechar todos os buracos no modelo."
 
@@ -16923,11 +17086,9 @@ msgstr ""
 "\n"
 "Definir um valor na configuração de quantidade de retração antes da limpeza abaixo executará qualquer retração em excesso antes da limpeza, caso contrário, será realizada após."
 
-# AI Translated
 msgid "Mixed color sublayer"
 msgstr "Subcamada de cor mista"
 
-# AI Translated
 msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects."
 msgstr "Ativa a divisão em subcamadas de cor mista. Quando ativado, as camadas que contêm filamentos de cor mista são divididas em subcamadas para obter efeitos de mistura de cores."
 
@@ -17410,6 +17571,14 @@ msgstr "Sem verificação"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Não execute nenhuma verificação de validade, como a verificação de conflitos de caminho do G-code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Modo estrito"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Sai com código diferente de zero quando o fatiamento gera um aviso não crítico que, de outro modo, seria apenas registrado, como um modelo que precisa de suporte enquanto o suporte está desativado. Use isto em CI ou em pipelines automatizadas que nunca devem entregar um fatiamento sutilmente defeituoso. Cada um desses avisos também é listado com uma classe estável no array `warnings` do result.json, que é gravado apenas no Linux. Não pode ser combinado com --no-check, que ignora a verificação de suporte."
+
 msgid "Normative check"
 msgstr "Verificação normativa"
 
@@ -17422,11 +17591,28 @@ msgstr "Emitir Informações do Modelo"
 msgid "This outputs the model’s information."
 msgstr "Isso emite as informações do modelo."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Inspecionar malha (JSON para stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Imprime no stdout um resumo JSON de cada objeto carregado e então sai: suas caixas delimitadoras e as faces do fecho convexo sobre as quais ele pode ser apoiado, com suas normais, áreas e centros. Essas são as faces entre as quais as opções --ground-* escolhem. Alternativa legível por máquina ao --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Inspecionar pintura (JSON para stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Imprime um resumo JSON estruturado de cada camada pintada (suportes, costura, cor MMU, textura difusa) já armazenada no modelo carregado — contagem de facetas, área de superfície e caixa delimitadora local à malha por estado — e então sai. Alternativa legível por máquina a abrir as ferramentas de pintura na interface."
+
 msgid "Export Settings"
 msgstr "Exportar Configurações"
 
-msgid "This exports settings to a file."
-msgstr "Isso exporta configurações para um arquivo."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Isto exporta as configurações para um arquivo. Use - para gravá-las no stdout."
 
 msgid "Send progress to pipe"
 msgstr "Enviar o progresso para a fila"
@@ -17482,6 +17668,30 @@ msgstr "Rotacionar ao redor de Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Ângulo de rotação ao redor do Eixo Y em graus."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Apoiar na maior face"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoia cada objeto na maior face do seu fecho convexo e o solta sobre a mesa. Entre faces de mesmo tamanho, mantém-se a que já está voltada para baixo. Objetos sem uma face grande o bastante para se apoiar são deixados como estão. As transformações são aplicadas na ordem da linha de comando, portanto rotações indicadas antes desta opção são respeitadas. --orient 1 é executado depois de todas as transformações e substitui a orientação."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Apoiar na face pela normal"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoia cada objeto na face do fecho convexo cuja normal externa é a mais próxima da direção NX,NY,NZ e o solta sobre a mesa. A direção está em coordenadas do objeto, que incluem as rotações indicadas antes desta opção e coincidem com os eixos da mesa, a menos que o arquivo de entrada gire o objeto. Por exemplo, 1,0,0 apoia o objeto sobre o lado +X. --orient 1 é executado depois de todas as transformações e substitui a orientação."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Apoiar na face em um ponto"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Apoia cada objeto na face do fecho convexo que contém o ponto X,Y,Z e o solta sobre a mesa. O ponto está em coordenadas do objeto, que incluem as rotações indicadas antes desta opção; --inspect-mesh informa os centros das faces nessas coordenadas. Objetos sem uma face assim são deixados como estão, e a execução falha se nenhum objeto tiver uma. --orient 1 é executado depois de todas as transformações e substitui a orientação."
+
 msgid "Scale the model by a float factor."
 msgstr "Escalar o modelo por um fator decimal."
 
@@ -17987,9 +18197,8 @@ msgstr "A geração da malha do arquivo do modelo falhou ou não há forma váli
 msgid "The supplied file couldn't be read because it's empty."
 msgstr "O arquivo fornecido não pôde ser lido porque está vazio."
 
-# AI Translated
 msgid "The file format is incompatible and cannot be parsed."
-msgstr "O formato do arquivo é incompatível e não pode ser lido."
+msgstr "O formato do arquivo é incompatível e não pode ser processado."
 
 msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension."
 msgstr "Formato de arquivo desconhecido: o arquivo de entrada deve ter extensão .stl, .obj, .amf(.xml)."
@@ -17998,10 +18207,10 @@ msgid "Unknown file format: input file must have .3mf or .zip.amf extension."
 msgstr "Formato de arquivo desconhecido: o arquivo de entrada deve ter extensão .3mf ou .zip.amf."
 
 msgid "load_obj: failed to parse"
-msgstr "load_obj: falha ao analisar"
+msgstr "load_obj: falha ao processar"
 
 msgid "load mtl in obj: failed to parse"
-msgstr "carregar mtl em obj: falha ao analisar"
+msgstr "carregar mtl em obj: falha ao processsar"
 
 msgid "The file contains polygons with more than 4 vertices."
 msgstr "O arquivo contém polígonos com mais de 4 vértices."
@@ -19115,7 +19324,7 @@ msgid "Serial"
 msgstr "Série"
 
 msgid "e.g. Basic, Matte, Silk, Marble"
-msgstr "por exemplo, Básico, Fosco, Seda, Mármore"
+msgstr "Ex.: Básico, Fosco, Seda, Mármore"
 
 msgid "Filament Preset"
 msgstr "Predefinição de Filamento"
@@ -19796,7 +20005,7 @@ msgid "Error. Can't get API token for authorization"
 msgstr "Erro. ​​Não foi possível obter o token de API para autorização"
 
 msgid "Could not parse server response."
-msgstr "Não foi possível decifrar a resposta do servidor."
+msgstr "Não foi possível processar a resposta do servidor."
 
 msgid "Error saving session to file"
 msgstr "Erro salvando sessão para arquivo"
@@ -19864,7 +20073,7 @@ msgstr "O host respondeu, mas não parece ser o Moonraker (falta o result.klippy
 
 #, c-format, boost-format
 msgid "Could not parse Moonraker server response: %s"
-msgstr "Não foi possível analisar a resposta do servidor Moonraker: %s"
+msgstr "Não foi possível processar a resposta do servidor Moonraker: %s"
 
 msgid "Connection to OctoPrint is working correctly."
 msgstr "A conexão com o OctoPrint funciona corretamente."
@@ -20238,7 +20447,6 @@ msgstr "Removido"
 msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings"
 msgstr "Ativar atribuição inteligente de filamento: Atribui um filamento a vários bicos para maximizar a economia"
 
-# AI Translated
 msgid "File Saving"
 msgstr "Salvamento de Arquivo"
 
@@ -20425,7 +20633,7 @@ msgid "Connection timed out. Please check if the printer and computer network ar
 msgstr "Limite de tempo de conexão esgotado. Verifique se a impressora e a rede do computador estão funcionando corretamente e confirme se estão na mesma rede."
 
 msgid "The Hostname/IP/URL could not be parsed, please check it and try again."
-msgstr "Não foi possível decifrar o Hostname/IP/URL; verifique-o e tente novamente."
+msgstr "Não foi possível processar o Hostname/IP/URL; verifique-o e tente novamente."
 
 msgid "File/data transfer interrupted. Please check the printer and network, then try it again."
 msgstr "Transferência de arquivo/dados interrompida. Verifique a impressora e a rede e tente novamente."
@@ -20522,6 +20730,18 @@ msgstr "Esta ação não pode ser desfeita. Continuar?"
 msgid "Skipping objects."
 msgstr "Ignorando objetos."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Proporção de Material"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Altura do Modelo"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Proporção"
+
 msgid "Select Filament"
 msgstr "Selecionar Filamento"
 
@@ -20761,11 +20981,15 @@ msgstr "Secando-Aquecendo"
 msgid "Drying-Dehumidifying"
 msgstr "Secando-Desumidificando"
 
-msgid " maximum drying temperature is "
-msgstr " temperatura máxima de secagem é "
+# AI Translated
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "A temperatura máxima de secagem de %s é %d°C."
 
-msgid " minimum drying temperature is "
-msgstr " temperatura mínima de secagem é "
+# AI Translated
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "A temperatura mínima de secagem de %s é %d°C."
 
 msgid "This filament may not be completely dried."
 msgstr "Este filamento pode não estar completamente seco."
@@ -21178,6 +21402,90 @@ msgstr ""
 "Evitar empenamento\n"
 "Você sabia que ao imprimir materiais propensos ao empenamento como ABS, aumentar adequadamente a temperatura da mesa aquecida pode reduzir a probabilidade de empenamento?"
 
+#~ msgid "Other"
+#~ msgstr "Outro"
+
+#~ msgid "Left: "
+#~ msgstr "Esquerda: "
+
+#~ msgid "Right: "
+#~ msgstr "Direita: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "A temperatura máxima não pode exceder "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "A temperatura mínima não pode ser menor do que "
+
+#~ msgid "up to"
+#~ msgstr "até"
+
+#~ msgid "above"
+#~ msgstr "acima"
+
+#~ msgid "from"
+#~ msgstr "de"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Pacote de configuração: "
+
+#~ msgid " updated to "
+#~ msgstr " atualizado para "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Erro de agrupamento: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " não pode ser colocado na "
+
+#~ msgid " maximum drying temperature is "
+#~ msgstr " temperatura máxima de secagem é "
+
+#~ msgid " minimum drying temperature is "
+#~ msgstr " temperatura mínima de secagem é "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "precisa de"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "não ativado"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "material não publicado"
+
+#~ msgid "Select the language"
+#~ msgstr "Selecione o idioma"
+
+#~ msgid "Select plugin"
+#~ msgstr "Selecionar plugin"
+
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n"
+#~ "Para fora começa no centro da superfície, de modo que qualquer excesso de material seja empurrado em direção à borda, onde é menos visível. Para dentro começa na borda e termina com as curvas fechadas no centro.\n"
+#~ "O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção."
+
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n"
+#~ "Para dentro começa cada superfície com as curvas externas mais largas, o que melhora a aderência da primeira camada em mesas onde as curvas fechadas no centro podem não aderir. Para fora começa no centro, empurrando qualquer excesso de material em direção à borda.\n"
+#~ "O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Se ativado, a torre de purga não será impressa em camadas sem troca de ferramenta. Em camadas com uma troca de ferramenta, a extrusora deslocará para baixo para imprimir a torre de purga. O usuário é responsável por garantir que não haja colisão com a impressão."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Isso exporta configurações para um arquivo."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "A visualização ao vivo nativa do Wayland requer o receptor de vídeo GTK do GStreamer. Instale o plugin gtksink para GStreamer e reinicie o OrcaSlicer."
 
@@ -21199,15 +21507,6 @@ msgstr ""
 #~ msgid "Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)"
 #~ msgstr "Seu sistema não possui codecs H.264 para o GStreamer, que são necessários para reproduzir vídeos. (Tente instalar os pacotes gstreamer1.0-plugins-bad ou gstreamer1.0-libav e depois reinicie o OrcaSlicer?)"
 
-#~ msgid "N"
-#~ msgstr "N"
-
-#~ msgid "g"
-#~ msgstr "g"
-
-#~ msgid "Fila Saving"
-#~ msgstr "Econo Filamento"
-
 #~ msgid ""
 #~ "Layer height is too small.\n"
 #~ "It will set to min_layer_height\n"
@@ -21535,7 +21834,7 @@ msgstr ""
 #~ "Pontes externas de menor densidade podem ajudar a melhorar a confiabilidade, pois há mais espaço para o ar circular ao redor da ponte extrudada, melhorando sua velocidade de resfriamento. O mínimo é 10%.\n"
 #~ "\n"
 #~ "Densidades mais altas podem produzir superfícies de ponte mais lisas, pois as linhas sobrepostas fornecem suporte adicional durante a impressão. O máximo é 120%.\n"
-#~ "Observação: Densidade de ponte muito alta pode causar deformação ou sobrextrusão."
+#~ "Nota: Densidade de ponte muito alta pode causar deformação ou sobrextrusão."
 
 #~ msgid ""
 #~ "Controls the density (spacing) of internal bridge lines. 100% means solid bridge. Default is 100%.\n"
@@ -21580,7 +21879,7 @@ msgstr ""
 #~ "\n"
 #~ "Geralmente, é recomendável ter esta opção ativada, a menos que o resfriamento da impressora seja potente o suficiente ou a velocidade de impressão lenta o suficiente para que a curvatura do perímetro não aconteça. Se estiver imprimindo com uma alta velocidade de perímetro externo, este parâmetro pode introduzir pequenos artefatos ao desacelerar devido à grande variação nas velocidades de impressão. Se você notar artefatos, certifique-se de que seu pressure advance esteja ajustado corretamente.\n"
 #~ "\n"
-#~ "Observação: quando esta opção estiver habilitada, os perímetros de saliência são tratados como saliências, o que significa que a velocidade de saliência é aplicada mesmo se o perímetro de saliência for parte de uma ponte. Por exemplo, quando os perímetros estiverem 100% salientes, sem nenhuma parede apoiando-os por baixo, a velocidade de saliência de 100% será aplicada."
+#~ "Nota: quando esta opção estiver habilitada, os perímetros de saliência são tratados como saliências, o que significa que a velocidade de saliência é aplicada mesmo se o perímetro de saliência for parte de uma ponte. Por exemplo, quando os perímetros estiverem 100% salientes, sem nenhuma parede apoiando-os por baixo, a velocidade de saliência de 100% será aplicada."
 
 #~ msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances."
 #~ msgstr "Se ativado, as pontes são mais confiáveis, podem cobrir distâncias maiores, mas podem parecer piores. Se desativado, as pontes ficam melhores, mas são confiáveis apenas para distâncias de ponte mais curtas."
@@ -22500,7 +22799,7 @@ msgstr ""
 #~ msgstr "Contagem máxima de projetos recentes"
 
 #~ msgid "This parameter adds a rotation of sparse infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all sparse infill patterns support rotation."
-#~ msgstr "Este parâmetro adiciona uma rotação na direção do preenchimento esparso a cada camada, de acordo com o gabarito especificado. O gabarito é uma lista de ângulos em graus separados por vírgulas, por exemplo, '0,90'. O primeiro ângulo é aplicado à primeira camada, o segundo ângulo à segunda camada e assim por diante. Se houver mais camadas do que ângulos, os ângulos serão repetidos. Observe que nem todos os padrões de preenchimento esparso suportam rotação."
+#~ msgstr "Este parâmetro adiciona uma rotação na direção do preenchimento esparso a cada camada, de acordo com o gabarito especificado. O gabarito é uma lista de ângulos em graus separados por vírgulas, como '0,90'. O primeiro ângulo é aplicado à primeira camada, o segundo ângulo à segunda camada e assim por diante. Se houver mais camadas do que ângulos, os ângulos serão repetidos. Observe que nem todos os padrões de preenchimento esparso suportam rotação."
 
 #~ msgid "Set Position"
 #~ msgstr "Definir Posição"
diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po
index 112fbc2834..97c1830426 100644
--- a/localization/i18n/ru/OrcaSlicer_ru.po
+++ b/localization/i18n/ru/OrcaSlicer_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -2431,15 +2431,6 @@ msgstr "Доступно обновление. Проверьте меню па
 msgid "%s has been removed."
 msgstr "%s был удалён."
 
-msgid "Switching application language"
-msgstr "Изменение языка приложения"
-
-msgid "Select the language"
-msgstr "Выбор языка"
-
-msgid "Language"
-msgstr "Язык"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "Не удалось переключить язык на %s."
@@ -3698,11 +3689,15 @@ msgstr "Втянуть текущий материал на Filament Track Switc
 msgid "Switch track at Filament Track Switch"
 msgstr "Переключить подачу на Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Температура не должна превышать "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Температура не должна превышать %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Температура не должна быть ниже "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Температура не должна быть ниже %d"
 
 msgid "Type to filter..."
 msgstr "Поиск..."
@@ -4579,6 +4574,15 @@ msgstr ""
 "Не удалось скопировать временный G-код в целевое расположение. Возможно, накопитель защищён от записи?\n"
 "Сообщение об ошибке: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Не удалось скопировать временный G-код в выходной G-код.\n"
+"Сообщение об ошибке: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Не удалось скопировать временный G-код в целевое расположение. Возможно, проблема с устройством хранения, попробуйте выполнить экспорт снова или использовать другое устройство. Повреждённый выходной файл G-кода находится в %1%.tmp."
@@ -4891,6 +4895,11 @@ msgid ""
 "No  - Cancel enabling spiral mode"
 msgstr "Использовать эти настройки и режим вазы?"
 
+# Не знаю, как и почему, но это, похоже, исправляет "вопросики" вместо
+# символов
+msgid "N/A"
+msgstr "–"
+
 msgid "Printing"
 msgstr "Печать"
 
@@ -5331,14 +5340,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Значение %s выходит за пределы допустимого диапазона. Допустимый диапазон - от %d до %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Имелось ввиду %s%%? (введено %s %s)\n"
-"Да – изменить на %s%%\n"
-"Нет – оставить %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Имелось ввиду %s%% или %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5360,26 +5366,18 @@ msgstr "Недопустимый шаблон. Используйте N, N#K и
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Недопустимый формат. Ожидаемый векторный формат: \"%1%\""
 
-# Не знаю, как и почему, но это, похоже, исправляет "вопросики" вместо
-# символов
-msgid "N/A"
-msgstr "–"
-
 msgid "System agents"
 msgstr "Системные агенты"
 
-msgid "No plugin selected"
-msgstr "Плагины не выбраны"
-
 msgid "Add plugin"
 msgstr "Добавить плагин"
 
-msgid "Select plugin"
-msgstr "Выбрать плагин"
-
 msgid "Remove plugin"
 msgstr "Удалить плагин"
 
+msgid "No plugin selected"
+msgstr "Плагины не выбраны"
+
 msgid "Configure"
 msgstr "Настроить"
 
@@ -5662,14 +5660,20 @@ msgstr "Оптимизировать"
 msgid "Regroup filament"
 msgstr "Изменить"
 
-msgid "up to"
-msgstr "до"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "до %1% мм"
 
-msgid "above"
-msgstr "после"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "выше %1% мм"
 
-msgid "from"
-msgstr "с"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "от %1% до %2% мм"
 
 msgid "Usage"
 msgstr "Расход"
@@ -6031,7 +6035,7 @@ msgstr "Объём:"
 msgid "Size:"
 msgstr "Размер:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "В G-коде на %d слое (z = %.2lf мм) обнаружен конфликт путей. Пожалуйста, разместите конфликтующие модели дальше друг от друга (%s <-> %s)."
 
@@ -6378,6 +6382,14 @@ msgstr "Сохранить проект как"
 msgid "Save current project as"
 msgstr "Сохранить текущий проект как"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Опубликовать 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Экспорт файла 3MF со встроенными выбранными настройками"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Импорт 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7662,6 +7674,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Снизу"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Эта настройка не указывает тип возможности плагина."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Эта настройка указывает нераспознанный тип возможности плагина: "
+
 msgid "Plugin Selection"
 msgstr "Выбор плагинов"
 
@@ -8212,6 +8232,14 @@ msgstr "Во избежание повреждения принтера убед
 msgid "Customized Preset"
 msgstr "Пользовательский профиль"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Некоторые опубликованные настройки не удалось применить:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Некоторые слоты материалов были изменены:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Имена компонентов внутри файла STEP не в формате UTF-8."
 
@@ -8624,6 +8652,21 @@ msgstr "Сохранить нарезанный файл как:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Файл %s отправлен в память принтера и может быть просмотрен на нём."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Опубликовать файл 3MF как:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Не удалось экспортировать опубликованный файл 3MF.\n"
+"Проверьте, доступна ли папка в сети и не открыт ли файл в других программах."
+
+msgid "Publish"
+msgstr "Опубликовать"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Не указан тип сопла. Укажите его и попробуйте ещё раз."
 
@@ -8829,9 +8872,6 @@ msgstr "Хотите продолжить?"
 msgid "Language selection"
 msgstr "Выбор языка"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Смена языка приложения при изменении некоторых профилей."
-
 msgid "Asia-Pacific"
 msgstr "Азиатско-Тихоокеанский"
 
@@ -8937,6 +8977,9 @@ msgstr "Расположение: "
 msgid "General"
 msgstr "Общие"
 
+msgid "Language"
+msgstr "Язык"
+
 msgid "Metric"
 msgstr "Метрическая СИ"
 
@@ -9377,9 +9420,6 @@ msgstr "Затемнять слои, находящиеся ниже текущ
 msgid "Dimmed layer brightness"
 msgstr "Яркость затемнённых слоёв"
 
-msgid "%"
-msgstr "%"
-
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
 "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option."
@@ -9770,9 +9810,6 @@ msgstr "Перейти на веб-страницу публикации мод
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Примечание: подготовка может занять несколько минут. Пожалуйста, наберитесь терпения."
 
-msgid "Publish"
-msgstr "Опубликовать"
-
 msgid "Publish was canceled"
 msgstr "Публикация была отменена"
 
@@ -9788,6 +9825,81 @@ msgstr "Отправка данных"
 msgid "Jump to webpage"
 msgstr "Перейти на страницу"
 
+# AI Translated
+msgid "Material"
+msgstr "Материал"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Смешанный материал"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Некоторые смешанные материалы зависят от материалов, которые не будут опубликованы:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Материал %d (смешанный)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% требует %2%, но он не включён."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% требует %2%, но его материал не будет опубликован."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Чтобы опубликовать смешанный материал, включите каждый используемый им материал и выберите «Полная публикация» либо выполните требование «Тип»."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Всё равно опубликовать"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Опубликовать 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Выберите, какие настройки будут опубликованы в файле 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki по публикации 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Видеоруководство по публикации 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Смешанный материал — публикуется целиком, когда выше выбрано «Включить»"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Опубликовать этот смешанный материал и включить + полностью опубликовать его составляющие материалы"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Опубликовать этот слот материала в файле 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Полная публикация"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Встроить материал этого слота целиком в файл 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Фильтровать невыбранные"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Сохранить %s как"
@@ -9805,6 +9917,10 @@ msgstr "Копирует в этот профиль все значения, у
 msgid "Detach from parent"
 msgstr "Сделать независимым"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Сохранить без родителя"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Независимый профиль"
@@ -10481,9 +10597,17 @@ msgstr "Для обнаружения налипаний на сопле тре
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Включение «Точной высоты по Z» совместно с черновой башней может привести к ошибкам нарезки. Продолжить?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Для плавного таймлапса требуется черновая башня на каждом слое, что несовместимо с параметром «Без разреженных слоёв». Параметр «Без разреженных слоёв» отключён."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Для сглаженного таймлапса требуется черновая башня, без неё на модели могут возникнуть дефекты. Включить черновую башню?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "Параметр «Без разреженных слоёв» несовместим с плавным таймлапсом, которому требуется черновая башня на каждом слое. Таймлапс переключён в обычный режим."
+
 msgid "Still print by object?"
 msgstr "Продолжить печать по очереди?"
 
@@ -10888,9 +11012,6 @@ msgstr "Совместимые настройки"
 msgid "Printable space"
 msgstr "Область печати"
 
-msgid "Printer Agent"
-msgstr "Сетевой агент"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Реализация сетевого агента для обмена информацией с принтером. Доступные реализации определяются при запуске."
 
@@ -11293,12 +11414,6 @@ msgstr "Количество экструдеров"
 msgid "Capabilities"
 msgstr "Возможности"
 
-msgid "Left: "
-msgstr "Левый: "
-
-msgid "Right: "
-msgstr "Правый: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Показать все профили (включая несовместимые)"
 
@@ -12133,15 +12248,22 @@ msgstr "Восстановление отменено"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Не удалось скопировать файл %1% в %2%: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Загрузка новых профилей производителей: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Пакет профилей: %1% обновлён до %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Не удалось загрузить профили производителей: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Перед обновлением профилей необходимо проверить несохранённые изменения."
 
-msgid "Configuration package: "
-msgstr "Пакет профилей: "
-
-msgid " updated to "
-msgstr " обновлён до "
-
 msgid "Open G-code file:"
 msgstr "Выберите G-код файл:"
 
@@ -12201,12 +12323,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping поддерживается только в Klipper, RepRapFirmware и Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Ошибка группировки: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Ошибка группировки: %1% нельзя разместить в левом сопле"
 
-# filament_type + <перевод> + extruder_name
-msgid " can not be placed in the "
-msgstr " нельзя заправить в "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Ошибка группировки: %1% нельзя разместить в правом сопле"
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
 msgstr "Ошибка группировки в ручном режиме. Проверьте количество сопел или измените группировку."
@@ -12319,6 +12444,10 @@ msgstr "%1% находится слишком близко к другим, чт
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "Модель «%1%» слишком высокая, что приведёт к столкновению механики."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Взаимное расположение модели и черновой башни не отвечает требованиям функции «Без разреженных слоёв». Измените их взаимное расположение, уменьшите высоту модели или отключите параметр «Без разреженных слоёв»."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " находится слишком близко к области исключения, что может привести к столкновению при печати."
 
@@ -12670,6 +12799,9 @@ msgstr "Сжатие G-кода перед отправкой"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Рекомендуется для принтеров, поддерживающих печать из архивов 3MF. Файлы печати будут отправляться с расширением \".gcode.3mf\"."
 
+msgid "Printer Agent"
+msgstr "Сетевой агент"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Реализация сетевого агента для обмена информацией с принтером."
 
@@ -13776,6 +13908,10 @@ msgstr "Ровный зигзаг"
 msgid "Concentric"
 msgstr "Эквидистанты"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Спиральный отступ"
+
 msgid "Hilbert Curve"
 msgstr "Кривая Гильберта"
 
@@ -13869,28 +14005,28 @@ msgstr ""
 msgid "Top surface fill order"
 msgstr "Направление печати"
 
+# AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Направление печати спирали/эквидистант на верхних поверхностях. Позволяет управляемо распределять избыток материала.\n"
-"• По умолчанию: использовать кратчайший путь.\n"
-"• Наружу: от центра шаблона к краю модели.\n"
-"• Внутрь: от края модели к центру шаблона."
+"Направление заполнения верхних поверхностей при использовании шаблона, идущего от центра (Эквидистанты, Спиральный отступ, Спираль Архимеда, Спиральная октаграмма).\n"
+"Наружу начинает от центра поверхности, поэтому излишек материала вытесняется к краю, где он менее заметен. Внутрь начинает от края и заканчивается тесными изгибами в центре.\n"
+"По умолчанию используется порядок по кратчайшему пути, который может идти в любом направлении."
 
 msgid "Bottom surface fill order"
 msgstr "Направление печати"
 
+# AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Направление печати спирали/эквидистант на нижних поверхностях. Позволяет управляемо распределять избыток материала.\n"
-"• По умолчанию: использовать кратчайший путь.\n"
-"• Наружу: от центра шаблона к краю модели.\n"
-"• Внутрь: от края модели к центру шаблона."
+"Направление заполнения нижних поверхностей при использовании шаблона, идущего от центра (Эквидистанты, Спиральный отступ, Спираль Архимеда, Спиральная октаграмма).\n"
+"Внутрь начинает каждую поверхность с более широких внешних изгибов, что улучшает адгезию первого слоя на столах, к которым тесные изгибы в центре могут не прилипать. Наружу начинает от центра, вытесняя излишек материала к краю.\n"
+"По умолчанию используется порядок по кратчайшему пути, который может идти в любом направлении."
 
 msgid "Internal solid infill pattern"
 msgstr "Шаблон сплошного заполнения"
@@ -14008,6 +14144,14 @@ msgstr "Против часовой стрелки"
 msgid "Clockwise"
 msgstr "По часовой стрелке"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Расстояние до штанги"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Расстояние по горизонтали от кончика сопла до дальнего края штанги. Используется для предотвращения столкновений при печати моделей по очереди."
+
 msgid "Height to rod"
 msgstr "Высота до вала"
 
@@ -16384,6 +16528,20 @@ msgstr "Обнаруживать нависающие периметры"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Использовать разную скорость печати в зависимости от выноса линии относительно её опоры. Для нависаний без опоры используется скорость печати мостов."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Печатать неподдерживаемые периметры последними"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Контуры периметров, полностью висящие в воздухе, печатаются только тогда, когда их есть чему удержать:\n"
+"они выдавливаются после остальных периметров своего острова, начиная с самого внутреннего, независимо от порядка периметров.\n"
+"Контур, который могут закрепить только мосты этого слоя, ждёт, пока эти мосты будут напечатаны, а контур, идущий вдоль опирающегося периметра, сохраняет своё место перед заполнением, которому он нужен как якорь."
+
 # В секции "Материал для линий"
 msgid "Outer walls"
 msgstr "Внешние периметры"
@@ -16894,6 +17052,39 @@ msgstr ""
 "\n"
 "Примечание: при отключении настройки зазор не будет заполняться остатками материала, что также может уменьшить заметность шва в сочетании с быстрым переходом к внутренним периметрам."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Очистка внутрь"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Применяется только к внешним периметрам, включая контуры отверстий. Во время очистки перемещает горячее сопло к уже напечатанным внутренним периметрам, чтобы уменьшить повторный нагрев только что напечатанного пластика и следы шва.\n"
+"\n"
+"Особенно полезно при высоте слоя менее 0,1 мм, где следы очистки заметнее.\n"
+"\n"
+"Использует обычную очистку, если рядом нет уже напечатанного внутреннего периметра (области с одним периметром или порядок периметров «Снаружи внутрь») либо если не удаётся найти опирающийся путь внутрь, например в тесных углах или разрывах шва."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Расстояние очистки внутрь"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Расстояние, на которое путь очистки смещается от внешнего периметра, задаётся в миллиметрах или в процентах от фактической ширины линии внешнего периметра.\n"
+"\n"
+"Например, 50% смещает путь на половину ширины внешнего периметра. Фактическое смещение ограничено как реальной шириной внешнего периметра, так и доступным промежутком до соседнего периметра, поэтому значения выше 100% или эквивалентное абсолютное расстояние не дают дополнительного эффекта. Задайте 0, чтобы отключить смещение."
+
 # Подворот начала линии на шве, упреждающая подача перед внешним периметром,
 # заглубление подачи ..., смещённая подача
 msgid "Wipe before external loop"
@@ -17185,9 +17376,9 @@ msgstr "Забирает новый инструмент, не дожидаяс
 msgid "No sparse layers (beta)"
 msgstr "Без разреженных слоёв (beta)"
 
-# Requires refactoring
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Если включено, черновая башня не будет печататься на слоях, где не происходит смена материала/инструмента. На слоях, где происходит смена материала, экструдер будет опускаться вниз до верхней части черновой башни, чтобы напечатать её. Слайсер не проверяет столкновения при перемещении, и пользователь сам несет ответственность за правильную настройку всех соответствующих параметров."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Если включено, черновая башня не будет печататься на слоях без смены инструмента. На слоях со сменой инструмента экструдер опустится вниз, чтобы напечатать черновую башню, поэтому башня оказывается ниже модели, и печатающей голове приходится тянуться к ней вниз. Компоновки, при которых это привело бы к столкновению с уже напечатанной моделью, отклоняются. Не действует при плавном таймлапсе и при обнаружении налипаний, которым нужна башня на каждом слое."
 
 msgid "Prime all printing extruders"
 msgstr "Подготовка всех печатающих экструдеров"
@@ -17212,6 +17403,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Цикличный"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Циклический порядок"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Пользовательская последовательность материалов, используемая циклическим порядком смены инструмента, в виде номеров материалов через запятую (например, «3,2,1,4»).\n"
+"Каждый слой печатает свои материалы в этой последовательности; не указанные материалы печатаются последними, по возрастанию.\n"
+"Оставьте пустым, чтобы перебирать материалы по возрастанию."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Применять циклический порядок к первому слою"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Применяет циклический порядок смены инструмента и к первому слою.\n"
+"По умолчанию отключено, поскольку первый слой вместо этого упорядочивается для наилучшей адгезии к столу: материалы, которыми печатаются мелкие хрупкие элементы первого слоя, печатаются последними, поэтому последующие смены инструмента и перемещения реже отрывают эти слабо закреплённые части. Этот порядок первого слоя учитывает также заданную пользователем последовательность материалов для первого слоя, если она указана. Преимущество циклического порядка (дополнительные смены инструмента дают каждому слою больше времени на остывание) к первому слою не относится, так как он печатается медленно и горячим ради адгезии.\n"
+"Включайте это, только если вам нужна в точности одна и та же последовательность инструментов на каждом слое, включая первый, ценой такой оптимизации адгезии."
+
 msgid "Slice gap closing radius"
 msgstr "Радиус закрытия зазоров полигональной сетки"
 
@@ -17222,9 +17441,6 @@ msgstr "Часто в импортируемых в программу моде
 msgid "Slicing Mode"
 msgstr "Режим нарезки"
 
-msgid "Other"
-msgstr "Прочее"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr ""
 "Режим нарезки «Чётный-нечётный» применяется для моделей с намеренно нарушенной целостностью. Например, для моделей самолётов с ресурса 3DLabPrint.\n"
@@ -18328,6 +18544,14 @@ msgstr "Без проверки"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Не запускать никакие проверки валидности, такие как проверка на конфликт путей в G-коде."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Строгий режим"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Завершает работу с ненулевым кодом, если при нарезке возникает некритическое предупреждение, которое иначе только записывается в журнал, например модель, которой нужны поддержки, когда поддержки отключены. Используйте это в CI или скриптовых конвейерах, которые никогда не должны выдавать незаметно испорченную нарезку. Каждое такое предупреждение также перечисляется с устойчивым классом в массиве `warnings` файла result.json, который создаётся только в Linux. Нельзя сочетать с --no-check, который пропускает проверку поддержек."
+
 msgid "Normative check"
 msgstr "Нормативная проверка"
 
@@ -18342,12 +18566,29 @@ msgstr "Информация о модели"
 msgid "This outputs the model’s information."
 msgstr "Вывод информации о модели."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Проверить полисетку (JSON в stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Выводит в stdout сводку JSON по каждой загруженной модели и завершает работу: её ограничивающие параллелепипеды и грани выпуклой оболочки, на которые её можно положить, с их нормалями, площадями и центрами. Именно из этих граней выбирают параметры --ground-*. Машиночитаемая альтернатива --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Проверить покраску (JSON в stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Выводит структурированную сводку JSON по каждому окрашенному слою (поддержки, шов, цвет MMU, нечёткая оболочка), уже сохранённому в загруженной модели, — количество граней, площадь поверхности и ограничивающий параллелепипед в координатах полисетки для каждого состояния — и завершает работу. Машиночитаемая альтернатива открытию инструментов покраски в интерфейсе."
+
 # ???
 msgid "Export Settings"
 msgstr "Экспорт настроек"
 
-msgid "This exports settings to a file."
-msgstr "Экспорт настроек в файл."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Экспортирует настройки в файл. Используйте -, чтобы записать их в stdout."
 
 # командная строка? нужен ли пеевод?
 msgid "Send progress to pipe"
@@ -18407,6 +18648,30 @@ msgstr "Поворот вокруг оси Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Угол поворота вокруг оси Y в градусах."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Положить на наибольшую грань"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладёт каждую модель на наибольшую грань её выпуклой оболочки и опускает на стол. Из одинаковых по площади граней сохраняется та, что уже обращена вниз. Модели без достаточно большой грани для опоры остаются без изменений. Преобразования выполняются в порядке командной строки, поэтому повороты, заданные до этого параметра, учитываются. --orient 1 выполняется после всех преобразований и заменяет ориентацию."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Положить на грань по нормали"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладёт каждую модель на ту грань выпуклой оболочки, внешняя нормаль которой ближе всего к направлению NX,NY,NZ, и опускает её на стол. Направление задаётся в координатах модели, которые включают повороты, указанные до этого параметра, и совпадают с осями стола, если входной файл не поворачивает модель. Например, 1,0,0 ставит модель на сторону +X. --orient 1 выполняется после всех преобразований и заменяет ориентацию."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Положить на грань в точке"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладёт каждую модель на ту грань выпуклой оболочки, которая содержит точку X,Y,Z, и опускает её на стол. Точка задаётся в координатах модели, которые включают повороты, указанные до этого параметра; --inspect-mesh выводит центры граней именно в них. Модели без такой грани остаются без изменений, а запуск завершается ошибкой, если такой грани нет ни у одной модели. --orient 1 выполняется после всех преобразований и заменяет ориентацию."
+
 msgid "Scale the model by a float factor."
 msgstr "Масштабировать модель с помощью коэффициента."
 
@@ -21541,6 +21806,18 @@ msgstr "Это действие необратимо. Продолжить?"
 msgid "Skipping objects."
 msgstr "Исключение объектов."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Доля материала"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Высота модели"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Доля"
+
 msgid "Select Filament"
 msgstr "Выбрать материал"
 
@@ -21789,11 +22066,15 @@ msgstr "Сушка — нагрев"
 msgid "Drying-Dehumidifying"
 msgstr "Сушка — вывод влаги"
 
-msgid " maximum drying temperature is "
-msgstr " максимальная температура сушки — "
+# AI Translated
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Максимальная температура сушки для %s — %d°C."
 
-msgid " minimum drying temperature is "
-msgstr " минимальная температура сушки — "
+# AI Translated
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Минимальная температура сушки для %s — %d°C."
 
 msgid "This filament may not be completely dried."
 msgstr "Сушка этого материала может не быть эффективной."
@@ -22218,6 +22499,94 @@ msgstr ""
 "Предотвращение коробления материала\n"
 "Знаете ли вы, что при печати материалами, склонными к короблению, таких как ABS, повышение температуры подогреваемого стола может снизить эту вероятность?"
 
+#~ msgid "Other"
+#~ msgstr "Прочее"
+
+#~ msgid "Left: "
+#~ msgstr "Левый: "
+
+#~ msgid "Right: "
+#~ msgstr "Правый: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Температура не должна превышать "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Температура не должна быть ниже "
+
+#~ msgid "up to"
+#~ msgstr "до"
+
+#~ msgid "above"
+#~ msgstr "после"
+
+#~ msgid "from"
+#~ msgstr "с"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Пакет профилей: "
+
+#~ msgid " updated to "
+#~ msgstr " обновлён до "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Ошибка группировки: "
+
+# filament_type + <перевод> + extruder_name
+#~ msgid " can not be placed in the "
+#~ msgstr " нельзя заправить в "
+
+#~ msgid " maximum drying temperature is "
+#~ msgstr " максимальная температура сушки — "
+
+#~ msgid " minimum drying temperature is "
+#~ msgstr " минимальная температура сушки — "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "требует"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "не включён"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "материал не опубликован"
+
+#~ msgid "Select the language"
+#~ msgstr "Выбор языка"
+
+#~ msgid "Select plugin"
+#~ msgstr "Выбрать плагин"
+
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Направление печати спирали/эквидистант на верхних поверхностях. Позволяет управляемо распределять избыток материала.\n"
+#~ "• По умолчанию: использовать кратчайший путь.\n"
+#~ "• Наружу: от центра шаблона к краю модели.\n"
+#~ "• Внутрь: от края модели к центру шаблона."
+
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Направление печати спирали/эквидистант на нижних поверхностях. Позволяет управляемо распределять избыток материала.\n"
+#~ "• По умолчанию: использовать кратчайший путь.\n"
+#~ "• Наружу: от центра шаблона к краю модели.\n"
+#~ "• Внутрь: от края модели к центру шаблона."
+
+# Requires refactoring
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Если включено, черновая башня не будет печататься на слоях, где не происходит смена материала/инструмента. На слоях, где происходит смена материала, экструдер будет опускаться вниз до верхней части черновой башни, чтобы напечатать её. Слайсер не проверяет столкновения при перемещении, и пользователь сам несет ответственность за правильную настройку всех соответствующих параметров."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Экспорт настроек в файл."
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Для нативного отображения трансляции в Wayland требуется gtksink (плагин для GStreamer). Установите необходимый пакет плагинов и перезапустите OrcaSlicer."
 
diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po
index 7ec20d136d..ce0d5f5034 100644
--- a/localization/i18n/sv/OrcaSlicer_sv.po
+++ b/localization/i18n/sv/OrcaSlicer_sv.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2767,15 +2767,6 @@ msgstr "Det finns en uppdatering tillgänglig. Öppna dialogrutan för förinst
 msgid "%s has been removed."
 msgstr "%s har tagits bort."
 
-msgid "Switching application language"
-msgstr "Byt applikationsspråk"
-
-msgid "Select the language"
-msgstr "Välj språk"
-
-msgid "Language"
-msgstr "Språk"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -4106,12 +4097,14 @@ msgid "Switch track at Filament Track Switch"
 msgstr "Byt spår vid Filament Track Switch"
 
 # AI Translated
-msgid "The maximum temperature cannot exceed "
-msgstr "Maxtemperaturen får inte överstiga "
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Maxtemperaturen får inte överstiga %d"
 
 # AI Translated
-msgid "The minmum temperature should not be less than "
-msgstr "Minimitemperaturen bör inte vara lägre än "
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Minimitemperaturen bör inte vara lägre än %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -5068,6 +5061,15 @@ msgstr ""
 "Det gick inte att kopiera den tillfälliga G-code-filen till utdatafilen. Kanske är SD-kortet skrivskyddat?\n"
 "Felmeddelande: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Kopieringen av den tillfälliga G-koden till utdata-G-koden misslyckades.\n"
+"Felmeddelande: %1%"
+
 # AI Translated
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
@@ -5387,6 +5389,10 @@ msgstr ""
 "JA -Ändra dessa inställningar och möjliggör Spiral läge automatiskt\n"
 "NEJ  -Avbryt Spiral läge denna gång"
 
+# AI Translated
+msgid "N/A"
+msgstr "Ej tillämpligt"
+
 msgid "Printing"
 msgstr "Utskrift pågår"
 
@@ -5902,14 +5908,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Värdet %s ligger utanför intervallet. Giltigt intervall är från %d till %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Det är %s%% eller %s %s?\n"
-"JA för %s%%, \n"
-"NEJ för %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Det är %s%% eller %s %s?"
+
+msgid "%"
+msgstr "%"
 
 # AI Translated
 #, boost-format
@@ -5936,30 +5939,22 @@ msgstr "Ogiltigt mönster. Använd N, N#K eller en kommaseparerad lista med valf
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Ogiltligt format. Förväntat vector format: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "Ej tillämpligt"
-
 # AI Translated
 msgid "System agents"
 msgstr "Systemagenter"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Ingen insticksmodul vald"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Lägg till insticksmodul"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Välj insticksmodul"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Ta bort insticksmodul"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Ingen insticksmodul vald"
+
 # AI Translated
 msgid "Configure"
 msgstr "Konfigurera"
@@ -6240,14 +6235,20 @@ msgstr "Ställ in på optimal"
 msgid "Regroup filament"
 msgstr "Gruppera om filament"
 
-msgid "up to"
-msgstr "upp till"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "upp till %1% mm"
 
-msgid "above"
-msgstr "över"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "över %1% mm"
 
-msgid "from"
-msgstr "från"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "från %1% till %2% mm"
 
 msgid "Usage"
 msgstr "Användning"
@@ -6636,7 +6637,7 @@ msgid "Size:"
 msgstr "Storlek:"
 
 # AI Translated
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Konflikter mellan G-code-banor hittades på lager %d, Z = %.2lfmm. Placera de objekt som krockar längre ifrån varandra (%s <-> %s)."
 
@@ -6972,6 +6973,14 @@ msgstr "Spara Projekt som"
 msgid "Save current project as"
 msgstr "Spara nuvarande projekt som"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Publicera 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Exportera en 3MF-fil med de valda inställningarna inbäddade"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Importera 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -8360,6 +8369,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Bottenlager"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Den här inställningen anger ingen typ av insticksmodulsfunktion."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Den här inställningen anger en okänd typ av insticksmodulsfunktion: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Val av insticksmodul"
@@ -8996,6 +9013,14 @@ msgstr "Bekräfta att G-koderna i dessa inställningar är säkra för att förh
 msgid "Customized Preset"
 msgstr "Anpassad inställning"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Vissa publicerade inställningar kunde inte tillämpas:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Vissa filamentplatser har ändrats:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Komponent namnet i STEP filen är inte UTF-8 format!"
 
@@ -9432,6 +9457,21 @@ msgstr "Spara beredningen som:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Filen %s har skickats till skrivarens lagringsutrymme och kan visas på skrivaren."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Publicera 3MF-filen som:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Det gick inte att exportera den publicerade 3MF-filen.\n"
+"Kontrollera om mappen finns online eller om andra program har filen öppen."
+
+msgid "Publish"
+msgstr "Publicera"
+
 # AI Translated
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Nozzeltypen är inte angiven. Ange nozzeln och försök igen."
@@ -9671,9 +9711,6 @@ msgstr "Fortsätta?"
 msgid "Language selection"
 msgstr "Språkval"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Byter språk medans inställningarna ändras."
-
 msgid "Asia-Pacific"
 msgstr "Asien-Stillahavsområdet"
 
@@ -9793,6 +9830,9 @@ msgstr "Sökväg till aktuell instans: "
 msgid "General"
 msgstr "Allmän"
 
+msgid "Language"
+msgstr "Språk"
+
 msgid "Metric"
 msgstr "Metrisk"
 
@@ -10311,9 +10351,6 @@ msgstr "När du drar i lagerreglaget i den beredda förhandsgranskningen rendera
 msgid "Dimmed layer brightness"
 msgstr "Ljusstyrka för dämpade lager"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -10740,9 +10777,6 @@ msgstr "Växla till modell publicerings hemsidan"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Notera: Förberedelserna kan ta flera minuter. Vänligen vänta."
 
-msgid "Publish"
-msgstr "Publicera"
-
 msgid "Publish was canceled"
 msgstr "Publiceringen avbröts"
 
@@ -10759,6 +10793,81 @@ msgstr "Laddar upp data"
 msgid "Jump to webpage"
 msgstr "Växla till hemsidan"
 
+# AI Translated
+msgid "Material"
+msgstr "Material"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Blandat filament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Vissa blandade filament är beroende av filament som inte kommer att publiceras:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (blandat)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% behöver %2%, som inte är aktiverat."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% behöver %2%, vars material inte kommer att publiceras."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "För att publicera ett blandat filament, aktivera varje filament det använder och välj Fullständig publicering eller uppfyll dess Typ-krav."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Publicera ändå"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Publicera 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Välj vilka inställningar som ska publiceras i 3MF-filen"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki för Publicera 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Videoguide för Publicera 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Blandat filament - publiceras i sin helhet när \"Aktivera\" ovan är valt"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Publicera det här blandade filamentet och aktivera + publicera dess ingående filament fullständigt"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Publicera den här filamentplatsen i 3MF-filen"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Fullständig publicering"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Bädda in hela filamentet från den här platsen i 3MF-filen"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Filtrera ej valda"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Spara %s som"
@@ -10777,6 +10886,10 @@ msgstr "Kopierar alla ärvda värden från den överordnade förinställningen t
 msgid "Detach from parent"
 msgstr "Koppla loss från överordnad"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Spara utan överordnad"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Unik förinställning"
@@ -11554,9 +11667,17 @@ msgstr "Ett prime torn krävs för klumpdetektering. Utan prime torn kan modelle
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Att aktivera både exakt Z-höjd och rengöringstornet kan orsaka skärningsfel. Vill du fortfarande aktivera exakt Z-höjd?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Jämn timelapse kräver ett prime torn på varje lager, vilket inte fungerar ihop med \"Inga glesa lager\". \"Inga glesa lager\" har stängts av."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Prime tower krävs för Smooth timelapse-läge. Det kan bli fel på modellen utan prime tower. Vill du aktivera prime tower?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Inga glesa lager\" fungerar inte ihop med jämn timelapse, som kräver ett prime torn på varje lager. Timelapse har växlat till traditionellt läge."
+
 msgid "Still print by object?"
 msgstr "Fortfarande utskrift per objekt?"
 
@@ -11982,10 +12103,6 @@ msgstr "Kompatibla process profiler"
 msgid "Printable space"
 msgstr "Utskriftsbar yta"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "Skrivaragent"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Välj vilken nätverksagentimplementation som ska användas för kommunikation med skrivaren. Tillgängliga agenter registreras vid start."
@@ -12431,14 +12548,6 @@ msgstr "Antal extruders"
 msgid "Capabilities"
 msgstr "Förmågor"
 
-# AI Translated
-msgid "Left: "
-msgstr "Vänster: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Höger: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Visa alla inställningar (inklusive inkompatibla)"
 
@@ -13380,17 +13489,22 @@ msgstr "Reparation avbruten"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Kopierar fil %1% till %2% misslyckade: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Laddar ner nya leverantörsprofiler: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Konfigurationspaket: %1% uppdaterat till %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Det gick inte att ladda ner leverantörsprofiler: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Kontrollera ej sparade ändringar innan konfigureringen uppdateras."
 
-# AI Translated
-msgid "Configuration package: "
-msgstr "Konfigurationspaket: "
-
-# AI Translated
-msgid " updated to "
-msgstr " uppdaterat till "
-
 msgid "Open G-code file:"
 msgstr "Öppna G-kod fil:"
 
@@ -13458,12 +13572,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping stöds endast av Klipper, RepRapFirmware och Marlin 2."
 
 # AI Translated
-msgid "Grouping error: "
-msgstr "Grupperingsfel: "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Grupperingsfel: %1% kan inte placeras i vänster nozzel"
 
 # AI Translated
-msgid " can not be placed in the "
-msgstr " kan inte placeras i "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Grupperingsfel: %1% kan inte placeras i höger nozzel"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -13578,6 +13694,10 @@ msgstr "%1% är för nära andra och kan orsaka kollisioner."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% är för hög, och kollisioner kommer att uppstå."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Modellens och prime tornets inbördes placering uppfyller inte kraven för funktionen \"Inga glesa lager\". Justera deras inbördes placering, sänk modellens höjd eller stäng av \"Inga glesa lager\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " är för nära undantagsområdet, det kan förekomma kollisioner vid utskrift."
 
@@ -13980,6 +14100,10 @@ msgstr "Använd 3MF i stället för G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Aktivera detta om skrivaren tar emot en 3MF-fil som utskriftsjobb. När det är aktiverat skickar Orca Slicer den beredda filen som en .gcode.3mf i stället för en vanlig .gcode-fil."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "Skrivaragent"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Välj vilken nätverksagentimplementation som ska användas för kommunikation med skrivaren."
@@ -15144,6 +15268,10 @@ msgstr "Justerade Rätlinjig"
 msgid "Concentric"
 msgstr "Koncentrisk"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spiralinsättning"
+
 msgid "Hilbert Curve"
 msgstr "Hilbert kurvan"
 
@@ -15241,13 +15369,13 @@ msgstr "Fyllordning för ovansidan"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Riktning i vilken ovansidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n"
-"Utåt börjar i ytans mitt, så att överskottsmaterial trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n"
-"Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen."
+"Riktningen som toppytor fylls i när ett mönster som utgår från mitten används (Koncentrisk, Spiralinsättning, Arkimediska kordor, Oktagramspiral).\n"
+"Utåt börjar i ytans mitt, så att överflödigt material trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n"
+"Standard använder ordningen efter kortaste väg, som kan gå åt vilket håll som helst."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -15255,13 +15383,13 @@ msgstr "Fyllordning för undersidan"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Riktning i vilken undersidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n"
-"Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar det första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fastnar. Utåt börjar i mitten och trycker överskottsmaterial mot kanten.\n"
-"Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen."
+"Riktningen som bottenytor fylls i när ett mönster som utgår från mitten används (Koncentrisk, Spiralinsättning, Arkimediska kordor, Oktagramspiral).\n"
+"Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fäster. Utåt börjar i mitten och trycker ut överflödigt material mot kanten.\n"
+"Standard använder ordningen efter kortaste väg, som kan gå åt vilket håll som helst."
 
 msgid "Internal solid infill pattern"
 msgstr "Invändigt mönster för fyllning av solida ytor"
@@ -15378,6 +15506,14 @@ msgstr "Moturs"
 msgid "Clockwise"
 msgstr "Medurs"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Avstånd till stången"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Vågrätt avstånd från nozzelns spets till stångens bortre kant. Används för att undvika kollisioner vid utskrift per objekt."
+
 msgid "Height to rod"
 msgstr "Höjd till axel"
 
@@ -17875,6 +18011,20 @@ msgstr "Upptäck överhängs vägg"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Upptäck överhängs procenten i förhållande till linjebredden och använd olika hastigheter för att skriva ut. Vid 100%% överhäng, bridge/brygg hastighet användas."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Skriv ut väggar utan stöd sist"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Väggvarv som ligger helt i luften skrivs ut först när något kan hålla upp dem:\n"
+"de extruderas efter de andra väggarna på sin ö, den innersta först, oavsett väggordning.\n"
+"Ett varv som bara det här lagrets bridges kan förankra väntar tills dessa bridges är utskrivna, medan ett varv som löper längs en vägg med stöd behåller sin plats före ifyllnaden, som behöver det som förankring."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Ytterväggar"
@@ -18393,6 +18543,39 @@ msgstr "Torka på varv"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "För att minimera sömmens synlighet i en sluten varvextrudering görs en liten rörelse inåt innan extrudern lämnar varvet."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Torka inåt"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Gäller endast yttre väggar, inklusive hålkonturer. Flyttar den heta nozzeln mot redan utskrivna inre väggar under avtorkningen, för att minska återuppvärmningen av nyss utskriven plast och sömmärken.\n"
+"\n"
+"Särskilt användbart vid lagerhöjder under 0,1 mm, där avtorkningsmärken syns tydligare.\n"
+"\n"
+"Använder vanlig avtorkning om ingen angränsande inre vägg redan är utskriven (områden med en enda vägg eller väggordningen Yttre/Inre), eller om ingen understödd väg inåt kan hittas, till exempel i trånga hörn eller vid sömglapp."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Avstånd för torka inåt"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Avståndet som avtorkningsvägen förskjuts bort från den yttre perimetern, angivet i millimeter eller som procent av den yttre väggens faktiska extruderingsbredd.\n"
+"\n"
+"Till exempel förskjuter 50% vägen med halva den yttre väggens bredd. Den verkliga förskjutningen begränsas både av den yttre väggens faktiska bredd och av det tillgängliga utrymmet till den angränsande väggen, så värden över 100% eller ett motsvarande absolut avstånd har ingen ytterligare effekt. Ange 0 för att stänga av förskjutningen."
+
 # AI Translated
 msgid "Wipe before external loop"
 msgstr "Torka före yttre varv"
@@ -18701,8 +18884,8 @@ msgid "No sparse layers (beta)"
 msgstr "Inga glesa lager (beta)"
 
 # AI Translated
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med verktygsbyte flyttar extrudern nedåt för att skriva ut prime tornet. Användaren ansvarar för att det inte uppstår kollision med utskriften."
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med ett verktygsbyte färdas extrudern nedåt för att skriva ut prime tornet, så att tornet hamnar under modellen och verktygshuvudet måste sträcka sig ned till det. Placeringar där detta skulle kollidera med ett redan utskrivet objekt avvisas. Har ingen effekt med jämn timelapse eller detektering av avlagringar på nozzeln, som kräver ett torn på varje lager."
 
 # AI Translated
 msgid "Prime all printing extruders"
@@ -18730,6 +18913,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cyklisk"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Cyklisk ordning"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Anpassad filamentsekvens som används av den cykliska verktygsbytesordningen, som filamentnummer åtskilda med kommatecken (t.ex. \"3,2,1,4\").\n"
+"Varje lager skriver ut sina filament enligt den här sekvensen; filament som inte anges skrivs ut sist, i stigande ordning.\n"
+"Lämna tomt för att gå igenom filamenten i stigande ordning."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Tillämpa cyklisk ordning på första lagret"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Tillämpar den cykliska verktygsbytesordningen även på första lagret.\n"
+"Detta är avstängt som standard, eftersom första lagret i stället ordnas för bästa vidhäftning mot byggplattan: filament som skriver ut små, ömtåliga detaljer i första lagret skrivs ut sist, så att efterföljande verktygsbyten och förflyttningar är mindre benägna att slå loss de svagt förankrade delarna. Den här ordningen för första lagret följer också en anpassad filamentsekvens för första lagret när en sådan är angiven. Fördelen med den cykliska ordningen (extra verktygsbyten ger varje lager mer tid att svalna) gäller inte första lagret, som skrivs ut långsamt och varmt för vidhäftningens skull.\n"
+"Aktivera detta endast om du behöver exakt samma verktygssekvens på varje lager, inklusive det första, på bekostnad av den vidhäftningsoptimeringen."
+
 msgid "Slice gap closing radius"
 msgstr "Bered spaltens stängningsradie"
 
@@ -18739,9 +18950,6 @@ msgstr "Sprickor mindre än 2 x gap stängningsradie fylls under triangeln mesh
 msgid "Slicing Mode"
 msgstr "Berednings läge"
 
-msgid "Other"
-msgstr "Andra"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Använd ”Jämn-Udda” för 3DLabPrint flygplans modeller. Använd ”Stäng hål” för att stänga alla hål i modellen."
 
@@ -19841,6 +20049,14 @@ msgstr "Ingen kontroll"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Utför inga giltighets kontroller, t.ex. kontroll av konflikter mellan G-kod och banor."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Strikt läge"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Avslutar med en kod skild från noll när beredningen ger en icke-kritisk varning som annars bara loggas, till exempel en modell som behöver support medan support är avstängt. Använd detta i CI eller skriptade flöden som aldrig ska leverera en omärkligt trasig beredning. Varje sådan varning listas också med en stabil klass i arrayen `warnings` i result.json, som bara skrivs på Linux. Kan inte kombineras med --no-check, som hoppar över supportkontrollen."
+
 msgid "Normative check"
 msgstr "Normativ kontroll"
 
@@ -19853,11 +20069,28 @@ msgstr "Mata ut modell information"
 msgid "This outputs the model’s information."
 msgstr "Mata ut modellens information."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Inspektera mesh (JSON till stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Skriver en JSON-sammanfattning av varje inläst objekt till stdout och avslutar sedan: dess begränsningsboxar och de ytor på det konvexa höljet som det kan vila på, med deras normaler, areor och mittpunkter. Det är bland dessa ytor som alternativen --ground-* väljer. Maskinläsbart alternativ till --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Inspektera målning (JSON till stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Skriver en strukturerad JSON-sammanfattning av varje målat lager (support, söm, MMU-färg, ojämn yta) som redan är sparat på den inlästa modellen — antal facetter, ytarea och begränsningsbox i meshens koordinater per tillstånd — och avslutar sedan. Maskinläsbart alternativ till att öppna målningsverktygen i gränssnittet."
+
 msgid "Export Settings"
 msgstr "Exportera inställningar"
 
-msgid "This exports settings to a file."
-msgstr "Exportera inställningar till en fil."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Detta exporterar inställningar till en fil. Använd - för att skriva dem till stdout."
 
 msgid "Send progress to pipe"
 msgstr "Skicka framsteg till röret (SLA)"
@@ -19923,6 +20156,30 @@ msgstr "Rotera kring Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Rotationsvinkel kring Y-axeln i grader."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Lägg på största ytan"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Lägger varje objekt på den största ytan av dess konvexa hölje och släpper ned det på byggplattan. Av lika stora ytor behålls den som redan vetter nedåt. Objekt utan en yta som är stor nog att vila på lämnas som de är. Transformationer körs i kommandoradens ordning, så rotationer som anges före det här alternativet respekteras. --orient 1 körs efter alla transformationer och ersätter orienteringen."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Lägg på yta efter normal"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Lägger varje objekt på den yta av det konvexa höljet vars utåtriktade normal ligger närmast riktningen NX,NY,NZ och släpper ned det på byggplattan. Riktningen anges i objektets koordinater, som innefattar de rotationer som angetts före det här alternativet och som sammanfaller med byggplattans axlar om inte indatafilen roterar objektet. Till exempel ställer 1,0,0 objektet på sin +X-sida. --orient 1 körs efter alla transformationer och ersätter orienteringen."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Lägg på yta vid punkt"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Lägger varje objekt på den yta av det konvexa höljet som innehåller punkten X,Y,Z och släpper ned det på byggplattan. Punkten anges i objektets koordinater, som innefattar de rotationer som angetts före det här alternativet; --inspect-mesh anger ytornas mittpunkter i dessa. Objekt utan en sådan yta lämnas som de är, och körningen misslyckas om inget objekt har någon. --orient 1 körs efter alla transformationer och ersätter orienteringen."
+
 msgid "Scale the model by a float factor."
 msgstr "Skala modellen med en plus faktor"
 
@@ -23513,6 +23770,18 @@ msgstr "Åtgärden kan inte ångras. Vill du fortsätta?"
 msgid "Skipping objects."
 msgstr "Hoppar över objekt."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Materialandel"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Modellhöjd"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Andel"
+
 msgid "Select Filament"
 msgstr "Välj filament"
 
@@ -23827,12 +24096,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Torkning – avfuktning"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " maximal torktemperatur är "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Maximal torktemperatur för %s är %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " minimal torktemperatur är "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Minimal torktemperatur för %s är %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -24297,6 +24568,104 @@ msgstr ""
 "Undvik vridning\n"
 "Visste du att när du skriver ut material som är benägna att vrida, såsom ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten för vridning?"
 
+#~ msgid "Other"
+#~ msgstr "Andra"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Vänster: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Höger: "
+
+# AI Translated
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Maxtemperaturen får inte överstiga "
+
+# AI Translated
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Minimitemperaturen bör inte vara lägre än "
+
+#~ msgid "up to"
+#~ msgstr "upp till"
+
+#~ msgid "above"
+#~ msgstr "över"
+
+#~ msgid "from"
+#~ msgstr "från"
+
+# AI Translated
+#~ msgid "Configuration package: "
+#~ msgstr "Konfigurationspaket: "
+
+# AI Translated
+#~ msgid " updated to "
+#~ msgstr " uppdaterat till "
+
+# AI Translated
+#~ msgid "Grouping error: "
+#~ msgstr "Grupperingsfel: "
+
+# AI Translated
+#~ msgid " can not be placed in the "
+#~ msgstr " kan inte placeras i "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " maximal torktemperatur är "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " minimal torktemperatur är "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "behöver"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "inte aktiverad"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "materialet är inte publicerat"
+
+#~ msgid "Select the language"
+#~ msgstr "Välj språk"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Välj insticksmodul"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Riktning i vilken ovansidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n"
+#~ "Utåt börjar i ytans mitt, så att överskottsmaterial trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n"
+#~ "Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Riktning i vilken undersidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n"
+#~ "Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar det första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fastnar. Utåt börjar i mitten och trycker överskottsmaterial mot kanten.\n"
+#~ "Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen."
+
+# AI Translated
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med verktygsbyte flyttar extrudern nedåt för att skriva ut prime tornet. Användaren ansvarar för att det inte uppstår kollision med utskriften."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Exportera inställningar till en fil."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Liveview i Wayland kräver GStreamers GTK-videosink. Installera insticksmodulen gtksink för GStreamer och starta sedan om OrcaSlicer."
diff --git a/localization/i18n/th/OrcaSlicer_th.po b/localization/i18n/th/OrcaSlicer_th.po
index 16dcb17ab1..410e3899dc 100644
--- a/localization/i18n/th/OrcaSlicer_th.po
+++ b/localization/i18n/th/OrcaSlicer_th.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-06-19 13:40+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -2456,15 +2456,6 @@ msgstr "มีอัปเดตพร้อมใช้งาน เปิด
 msgid "%s has been removed."
 msgstr "ลบ %s แล้ว"
 
-msgid "Switching application language"
-msgstr "การเปลี่ยนภาษาของแอปพลิเคชัน"
-
-msgid "Select the language"
-msgstr "เลือกภาษา"
-
-msgid "Language"
-msgstr "ภาษา"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3698,11 +3689,15 @@ msgstr "ดึงเส้นพลาสติกปัจจุบันกล
 msgid "Switch track at Filament Track Switch"
 msgstr "สลับแทร็กที่ Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "อุณหภูมิสูงสุดต้องไม่เกิน "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "อุณหภูมิสูงสุดต้องไม่เกิน %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า"
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า %d"
 
 msgid "Type to filter..."
 msgstr "พิมพ์เพื่อกรอง..."
@@ -4584,6 +4579,15 @@ msgstr ""
 "การคัดลอก G-code ชั่วคราวไปยังเอาต์พุต G-code ล้มเหลว บางทีการ์ด SD อาจถูกล็อคการเขียน?\n"
 "ข้อความแสดงข้อผิดพลาด: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"การคัดลอก G-code ชั่วคราวไปยัง G-code ผลลัพธ์ล้มเหลว\n"
+"ข้อความแสดงข้อผิดพลาด: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "การคัดลอก G-code ชั่วคราวไปยังเอาต์พุต G-code ล้มเหลว อาจมีปัญหากับอุปกรณ์เป้าหมาย โปรดลองส่งออกอีกครั้งหรือใช้อุปกรณ์อื่น G-code เอาต์พุตที่เสียหายอยู่ที่ %1%.tmp"
@@ -4887,6 +4891,9 @@ msgstr ""
 "ใช่ - เปลี่ยนการตั้งค่าเหล่านี้และเปิดใช้งานโหมดเกลียวโดยอัตโนมัติ\n"
 "ไม่ - เลิกใช้โหมดเกลียวในครั้งนี้"
 
+msgid "N/A"
+msgstr "ไม่มี"
+
 msgid "Printing"
 msgstr "กำลังพิมพ์"
 
@@ -5317,14 +5324,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "ค่า %s อยู่นอกช่วง ช่วงที่ถูกต้องคือตั้งแต่ %d ถึง %d"
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"มันคือ %s%% หรือ %s %s?\n"
-"ใช่สำหรับ %s%% \n"
-"ไม่ สำหรับ %s %s"
+msgid "Is it %s%% or %s %s?"
+msgstr "มันคือ %s%% หรือ %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5346,29 +5350,22 @@ msgstr "รูปแบบไม่ถูกต้อง ใช้ N, N#K หร
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "รูปแบบไม่ถูกต้อง รูปแบบเวกเตอร์ที่ต้องการ: \"%1%\""
 
-msgid "N/A"
-msgstr "ไม่มี"
-
 # AI Translated
 msgid "System agents"
 msgstr "เอเจนต์ระบบ"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "ไม่ได้เลือกปลั๊กอิน"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "เพิ่มปลั๊กอิน"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "เลือกปลั๊กอิน"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "ลบปลั๊กอิน"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "ไม่ได้เลือกปลั๊กอิน"
+
 # AI Translated
 msgid "Configure"
 msgstr "กำหนดค่า"
@@ -5624,14 +5621,20 @@ msgstr "ตั้งค่าให้เหมาะสมที่สุด"
 msgid "Regroup filament"
 msgstr "จัดกลุ่มเส้นพลาสติกใหม่"
 
-msgid "up to"
-msgstr "สูงสุด"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "สูงสุด %1% มม."
 
-msgid "above"
-msgstr "ข้างบน"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "สูงกว่า %1% มม."
 
-msgid "from"
-msgstr "จาก"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "จาก %1% ถึง %2% มม."
 
 msgid "Usage"
 msgstr "การใช้งาน"
@@ -5992,7 +5995,7 @@ msgstr "ปริมาณ:"
 msgid "Size:"
 msgstr "ขนาด:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "พบความขัดแย้งของเส้นทางรหัส G ที่เลเยอร์ %d, Z = %.2lfmm โปรดแยกวัตถุที่ขัดแย้งกันให้ไกลออกไป (%s <-> %s)"
 
@@ -6304,6 +6307,14 @@ msgstr "บันทึกโปรเจกต์เป็น"
 msgid "Save current project as"
 msgstr "บันทึกโครงการปัจจุบันเป็น"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "เผยแพร่ 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "ส่งออกไฟล์ 3MF ที่ฝังการตั้งค่าที่เลือกไว้"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "นำเข้า 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7558,6 +7569,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "ล่าง"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "การตั้งค่านี้ไม่ได้ระบุชนิดความสามารถของปลั๊กอิน"
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "การตั้งค่านี้ระบุชนิดความสามารถของปลั๊กอินที่ไม่รู้จัก: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "การเลือกปลั๊กอิน"
@@ -8118,6 +8137,14 @@ msgstr "โปรดยืนยันว่ารหัส G ภายในค
 msgid "Customized Preset"
 msgstr "ค่าที่ตั้งไว้ล่วงหน้าที่กำหนดเอง"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "ไม่สามารถใช้การตั้งค่าที่เผยแพร่บางรายการได้:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "ช่องเส้นพลาสติกบางช่องถูกเปลี่ยนแปลง:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "ชื่อของส่วนประกอบภายในไฟล์ STEP ไม่ใช่รูปแบบ UTF-8!"
 
@@ -8525,6 +8552,21 @@ msgstr "บันทึกไฟล์ที่สไลซ์เป็น:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "ไฟล์ %s ถูกส่งไปยังพื้นที่เก็บข้อมูลของเครื่องพิมพ์แล้ว และสามารถดูได้บนเครื่องพิมพ์"
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "เผยแพร่ไฟล์ 3MF เป็น:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"ส่งออกไฟล์ 3MF ที่เผยแพร่ล้มเหลว\n"
+"โปรดตรวจสอบว่าโฟลเดอร์นั้นมีอยู่บนออนไลน์หรือมีโปรแกรมอื่นเปิดไฟล์นี้ค้างไว้หรือไม่"
+
+msgid "Publish"
+msgstr "เผยแพร่"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "ไม่ได้ตั้งค่าประเภทหัวฉีด โปรดตั้งหัวฉีดแล้วลองอีกครั้ง"
 
@@ -8735,9 +8777,6 @@ msgstr "ต้องการดำเนินการต่อหรือไ
 msgid "Language selection"
 msgstr "การเลือกภาษา"
 
-msgid "Switching application language while some presets are modified."
-msgstr "การสลับภาษาของแอปพลิเคชันในขณะที่มีการแก้ไขค่าที่ตั้งไว้บางส่วน"
-
 msgid "Asia-Pacific"
 msgstr "เอเชียแปซิฟิก"
 
@@ -8842,6 +8881,9 @@ msgstr "เส้นทางอินสแตนซ์ปัจจุบัน
 msgid "General"
 msgstr "ทั่วไป"
 
+msgid "Language"
+msgstr "ภาษา"
+
 msgid "Metric"
 msgstr "เมตริก"
 
@@ -9280,9 +9322,6 @@ msgstr "เมื่อเลื่อนแถบเลเยอร์ในต
 msgid "Dimmed layer brightness"
 msgstr "ความสว่างของเลเยอร์ที่หรี่"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9667,9 +9706,6 @@ msgstr "ข้ามไปที่โมเดลเผยแพร่หน้
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "หมายเหตุ: การเตรียมการอาจใช้เวลาหลายนาที กรุณาอดทน."
 
-msgid "Publish"
-msgstr "เผยแพร่"
-
 msgid "Publish was canceled"
 msgstr "การเผยแพร่ถูกยกเลิก"
 
@@ -9685,6 +9721,81 @@ msgstr "กำลังอัพโหลดข้อมูล"
 msgid "Jump to webpage"
 msgstr "ข้ามไปที่หน้าเว็บ"
 
+# AI Translated
+msgid "Material"
+msgstr "วัสดุ"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "เส้นพลาสติกผสม"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "เส้นพลาสติกผสมบางรายการต้องอาศัยเส้นพลาสติกที่จะไม่ถูกเผยแพร่:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "เส้นพลาสติก %d (ผสม)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% ต้องใช้ %2% แต่ยังไม่ได้เปิดใช้"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% ต้องใช้ %2% แต่วัสดุของมันจะไม่ถูกเผยแพร่"
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "หากต้องการเผยแพร่เส้นพลาสติกผสม ให้เปิดใช้เส้นพลาสติกทุกเส้นที่ใช้ แล้วเลือกการเผยแพร่แบบเต็ม หรือทำตามข้อกำหนดชนิดของมัน"
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "เผยแพร่ต่อไป"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "เผยแพร่ 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "เลือกว่าจะเผยแพร่การตั้งค่าใดในไฟล์ 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "วิกิการเผยแพร่ 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "คู่มือวีดีโอการเผยแพร่ 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "เส้นพลาสติกผสม - เผยแพร่ทั้งชุดเมื่อเลือก \"เปิดใช้\" ด้านบน"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "เผยแพร่เส้นพลาสติกผสมนี้ และเปิดใช้ + เผยแพร่แบบเต็มสำหรับเส้นพลาสติกที่เป็นส่วนประกอบ"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "เผยแพร่ช่องเส้นพลาสติกนี้ในไฟล์ 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "การเผยแพร่แบบเต็ม"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "ฝังเส้นพลาสติกทั้งหมดของช่องนี้ลงในไฟล์ 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "กรองรายการที่ไม่ได้เลือก"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "บันทึก %s เป็น"
@@ -9702,6 +9813,10 @@ msgstr "คัดลอกค่าที่สืบทอดมาจากพ
 msgid "Detach from parent"
 msgstr "แยกออกจากพรีเซ็ตแม่"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "บันทึกโดยไม่มีพรีเซ็ตแม่"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "พรีเซ็ตอิสระ"
@@ -10406,9 +10521,17 @@ msgstr "จำเป็นต้องใช้ Prime Tower ในการต
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "การเปิดใช้งานทั้งความสูง Z ที่แม่นยำและ Prime Tower อาจทำให้เกิดข้อผิดพลาดในการแบ่งส่วน คุณยังต้องการเปิดใช้งานความสูง Z ที่แม่นยำหรือไม่"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "ไทม์แลปส์แบบราบรื่นต้องมี Prime Tower ในทุกเลเยอร์ ซึ่งใช้ร่วมกับ \"ไม่มีชั้นกระจัดกระจาย\" ไม่ได้ จึงปิด \"ไม่มีชั้นกระจัดกระจาย\" แล้ว"
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "จำเป็นต้องใช้ Prime Tower สำหรับโหมดไทม์แลปส์แบบราบรื่น หากไม่มี Prime Tower อาจเกิดตำหนิบนโมเดลได้ ต้องการเปิดใช้ Prime Tower หรือไม่?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"ไม่มีชั้นกระจัดกระจาย\" ใช้ร่วมกับไทม์แลปส์แบบราบรื่นไม่ได้ เพราะไทม์แลปส์แบบราบรื่นต้องมี Prime Tower ในทุกเลเยอร์ ไทม์แลปส์จึงถูกสลับเป็นโหมดแบบดั้งเดิม"
+
 msgid "Still print by object?"
 msgstr "ยังคงพิมพ์ตามวัตถุใช่ไหม"
 
@@ -10777,9 +10900,6 @@ msgstr "โปรไฟล์กระบวนการที่เข้าก
 msgid "Printable space"
 msgstr "พื้นที่ที่สามารถพิมพ์ได้"
 
-msgid "Printer Agent"
-msgstr "ตัวแทนเครื่องพิมพ์"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "เลือกการใช้งานตัวแทนเครือข่ายสำหรับการสื่อสารของเครื่องพิมพ์ ตัวแทนที่มีอยู่จะได้รับการลงทะเบียนเมื่อเริ่มต้น"
 
@@ -11180,14 +11300,6 @@ msgstr "จำนวนชุดดันเส้น"
 msgid "Capabilities"
 msgstr "ความสามารถ"
 
-# AI Translated
-msgid "Left: "
-msgstr "ซ้าย: "
-
-# AI Translated
-msgid "Right: "
-msgstr "ขวา: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "แสดงค่าที่ตั้งล่วงหน้าทั้งหมด (รวมทั้งเข้ากันไม่ได้)"
 
@@ -12026,15 +12138,22 @@ msgstr "ยกเลิกการซ่อมแล้ว"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "การคัดลอกไฟล์ %1% ถึง %2% ล้มเหลว: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "กำลังดาวน์โหลดโปรไฟล์ผู้ขายใหม่: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "แพคเกจการกำหนดค่า: %1% อัปเดตเป็น %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "ดาวน์โหลดโปรไฟล์ผู้ขายล้มเหลว: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "โปรดตรวจสอบการเปลี่ยนแปลงที่ยังไม่ได้บันทึกก่อนอัปเดตการกำหนดค่า"
 
-msgid "Configuration package: "
-msgstr "แพคเกจการกำหนดค่า:"
-
-msgid " updated to "
-msgstr "อัปเดตเป็น"
-
 msgid "Open G-code file:"
 msgstr "เปิดไฟล์ G-code:"
 
@@ -12092,11 +12211,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "รูปร่างอินพุตรองรับเฉพาะ Klipper, RepRapFirmware และ Marlin 2 เท่านั้น"
 
-msgid "Grouping error: "
-msgstr "ข้อผิดพลาดในการจัดกลุ่ม:"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "ข้อผิดพลาดในการจัดกลุ่ม: %1% ไม่สามารถวางในหัวฉีดซ้ายได้"
 
-msgid " can not be placed in the "
-msgstr "ไม่สามารถวางใน"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "ข้อผิดพลาดในการจัดกลุ่ม: %1% ไม่สามารถวางในหัวฉีดขวาได้"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12210,6 +12333,10 @@ msgstr "%1% อยู่ใกล้ผู้อื่นมากเกิน
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% สูงเกินไป และจะเกิดการชนกัน"
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "ตำแหน่งสัมพัทธ์ของโมเดลกับ Prime Tower ไม่เป็นไปตามข้อกำหนดของฟังก์ชัน \"ไม่มีชั้นกระจัดกระจาย\" โปรดปรับตำแหน่งสัมพัทธ์ของทั้งสอง ลดความสูงของโมเดล หรือปิด \"ไม่มีชั้นกระจัดกระจาย\""
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr "อยู่ใกล้พื้นที่แยกมากเกินไป อาจเกิดการชนกันเมื่อพิมพ์"
 
@@ -12555,6 +12682,9 @@ msgstr "ใช้ 3MF แทน G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "เปิดใช้งานหากเครื่องพิมพ์รับไฟล์ 3MF เป็นงานพิมพ์ เมื่อเปิดใช้งาน OrcaSlicer จะส่งไฟล์ที่สไลซ์แล้วเป็น .gcode.3mf แทนไฟล์ .gcode ธรรมดา"
 
+msgid "Printer Agent"
+msgstr "ตัวแทนเครื่องพิมพ์"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "เลือกการใช้งานตัวแทนเครือข่ายสำหรับการสื่อสารของเครื่องพิมพ์"
 
@@ -13600,6 +13730,10 @@ msgstr "จัดแนวเป็นเส้นตรง"
 msgid "Concentric"
 msgstr "ศูนย์กลาง"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "เกลียวเข้าใน"
+
 msgid "Hilbert Curve"
 msgstr "ฮิลเบิร์ต เคิร์ฟ"
 
@@ -13691,13 +13825,13 @@ msgstr "ลำดับการเติมพื้นผิวด้านบ
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"ทิศทางที่พื้นผิวด้านบนถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n"
-"ออกด้านนอกเริ่มที่กึ่งกลางของพื้นผิว ดังนั้นวัสดุส่วนเกินจะถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในเริ่มที่ขอบและจบด้วยเส้นโค้งแคบที่กึ่งกลาง\n"
-"ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้"
+"ทิศทางการเติมผิวด้านบนเมื่อใช้รูปแบบที่เริ่มจากศูนย์กลาง (ศูนย์กลาง, เกลียวเข้าใน, คอร์ดอาร์คิมีดีน, เกลียวแปดเหลี่ยม)\n"
+"ออกด้านนอกจะเริ่มที่กึ่งกลางของผิว วัสดุส่วนเกินจึงถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในจะเริ่มที่ขอบและจบด้วยเส้นโค้งแคบตรงกึ่งกลาง\n"
+"ค่าเริ่มต้นใช้การเรียงตามเส้นทางที่สั้นที่สุด ซึ่งอาจเดินไปทางใดก็ได้"
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13705,13 +13839,13 @@ msgstr "ลำดับการเติมพื้นผิวด้านล
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"ทิศทางที่พื้นผิวด้านล่างถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n"
-"เข้าด้านในเริ่มแต่ละพื้นผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยเพิ่มการยึดเกาะเลเยอร์แรกบนฐานพิมพ์ที่เส้นโค้งแคบตรงกลางอาจไม่ติด ออกด้านนอกเริ่มที่กึ่งกลาง โดยดันวัสดุส่วนเกินไปทางขอบ\n"
-"ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้"
+"ทิศทางการเติมผิวด้านล่างเมื่อใช้รูปแบบที่เริ่มจากศูนย์กลาง (ศูนย์กลาง, เกลียวเข้าใน, คอร์ดอาร์คิมีดีน, เกลียวแปดเหลี่ยม)\n"
+"เข้าด้านในจะเริ่มแต่ละผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยให้ชั้นแรกยึดเกาะดีขึ้นบนฐานพิมพ์ที่เส้นโค้งแคบตรงกึ่งกลางอาจไม่ติด ออกด้านนอกจะเริ่มที่กึ่งกลางและดันวัสดุส่วนเกินไปทางขอบ\n"
+"ค่าเริ่มต้นใช้การเรียงตามเส้นทางที่สั้นที่สุด ซึ่งอาจเดินไปทางใดก็ได้"
 
 msgid "Internal solid infill pattern"
 msgstr "รูปแบบไส้ในของแข็งภายใน"
@@ -13814,6 +13948,14 @@ msgstr "ทวนเข็มนาฬิกา"
 msgid "Clockwise"
 msgstr "ตามเข็มนาฬิกา"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "ระยะถึงแกน"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "ระยะในแนวนอนจากปลายหัวฉีดถึงขอบด้านไกลของแกน ใช้สำหรับหลีกเลี่ยงการชนในการพิมพ์ตามวัตถุ"
+
 msgid "Height to rod"
 msgstr "ความสูงถึงก้าน"
 
@@ -15983,6 +16125,20 @@ msgstr "ตรวจจับผนังส่วนยื่น"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "ตรวจจับเปอร์เซ็นต์ระยะยื่นที่สัมพันธ์กับความกว้างของเส้น และใช้ความเร็วที่แตกต่างกันในการพิมพ์ สำหรับระยะยื่น 100%% จะใช้ความเร็วบริดจ์"
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "พิมพ์ผนังที่ไม่มีส่วนรองรับเป็นลำดับสุดท้าย"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"รอบผนังที่ลอยอยู่กลางอากาศทั้งวงจะถูกพิมพ์ก็ต่อเมื่อมีสิ่งที่รองรับมันได้แล้ว:\n"
+"โดยจะถูกอัดขึ้นรูปหลังผนังอื่น ๆ ของเกาะเดียวกัน เริ่มจากวงในสุด ไม่ว่าลำดับผนังจะเป็นแบบใด\n"
+"รอบที่มีเพียงสะพานของเลเยอร์นี้เท่านั้นที่ยึดไว้ได้จะรอจนกว่าสะพานเหล่านั้นจะถูกพิมพ์ ส่วนรอบที่วิ่งขนานไปกับผนังที่มีส่วนรองรับจะยังคงอยู่ก่อนไส้ใน ซึ่งต้องใช้มันเป็นจุดยึด"
+
 msgid "Outer walls"
 msgstr "ผนังชั้นนอก"
 
@@ -16420,6 +16576,39 @@ msgstr "เช็ดบนลูป"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "เพื่อลดการมองเห็นรอยต่อในการอัดรีดแบบวงปิด จะมีการเคลื่อนตัวเข้าด้านในเล็กน้อยก่อนที่ชุดดันเส้นจะออกจากวง"
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "เช็ดเข้าด้านใน"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"ใช้กับผนังด้านนอกเท่านั้น รวมถึงขอบรู โดยจะขยับหัวฉีดที่ร้อนเข้าหาผนังด้านในที่พิมพ์ไปแล้วระหว่างการเช็ด เพื่อลดการให้ความร้อนซ้ำแก่พลาสติกที่เพิ่งพิมพ์และลดรอยตะเข็บ\n"
+"\n"
+"มีประโยชน์เป็นพิเศษที่ความสูงเลเยอร์ต่ำกว่า 0.1 มม. ซึ่งรอยเช็ดจะเห็นได้ชัดกว่า\n"
+"\n"
+"จะใช้การเช็ดแบบปกติหากยังไม่มีผนังด้านในที่อยู่ติดกันถูกพิมพ์ (พื้นที่ผนังเดี่ยว หรือลำดับผนังแบบด้านนอก/ด้านใน) หรือหากหาเส้นทางเข้าด้านในที่มีส่วนรองรับไม่ได้ เช่น ที่มุมแคบหรือช่องว่างของรอยตะเข็บ"
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "ระยะเช็ดเข้าด้านใน"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"ระยะที่เส้นทางการเช็ดถูกเลื่อนออกจากเส้นรอบรูปด้านนอก ระบุเป็นมิลลิเมตรหรือเป็นเปอร์เซ็นต์ของความกว้างการอัดขึ้นรูปจริงของผนังด้านนอก\n"
+"\n"
+"ตัวอย่างเช่น 50% จะเลื่อนเส้นทางไปครึ่งหนึ่งของความกว้างผนังด้านนอก ระยะเลื่อนที่มีผลจริงถูกจำกัดทั้งโดยความกว้างจริงของผนังด้านนอกและโดยช่องว่างที่มีถึงผนังที่อยู่ติดกัน ดังนั้นค่าที่เกิน 100% หรือระยะสัมบูรณ์ที่เทียบเท่าจะไม่ให้ผลเพิ่มเติม ตั้งเป็น 0 เพื่อปิดการเลื่อน"
+
 msgid "Wipe before external loop"
 msgstr "เช็ดก่อนวนรอบภายนอก"
 
@@ -16681,8 +16870,9 @@ msgstr "รับเครื่องมือใหม่โดยไม่ร
 msgid "No sparse layers (beta)"
 msgstr "ไม่มีชั้นกระจัดกระจาย (เบต้า)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "หากเปิดใช้งาน Wipe Tower จะไม่ถูกพิมพ์บนเลเยอร์โดยไม่มีการเปลี่ยนแปลงเครื่องมือ บนเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงด้านล่างเพื่อพิมพ์ Wipe Tower ผู้ใช้มีหน้าที่รับผิดชอบในการตรวจสอบให้แน่ใจว่าไม่มีการชนกันกับงานพิมพ์"
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "หากเปิดใช้ Wipe Tower จะไม่ถูกพิมพ์ในเลเยอร์ที่ไม่มีการเปลี่ยนเครื่องมือ ในเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงไปพิมพ์ Wipe Tower ทำให้หอคอยอยู่ต่ำกว่าโมเดลและหัวพิมพ์ต้องยื่นลงไปหามัน การจัดวางที่จะทำให้ชนกับวัตถุที่พิมพ์ไปแล้วจะถูกปฏิเสธ ไม่มีผลเมื่อใช้ไทม์แลปส์แบบราบรื่นหรือการตรวจจับการจับตัวเป็นก้อนที่หัวฉีด ซึ่งต้องมีหอคอยในทุกเลเยอร์"
 
 msgid "Prime all printing extruders"
 msgstr "ใช้ชุดดันเส้นการพิมพ์ทั้งหมด"
@@ -16708,6 +16898,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Cyclic"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "ลำดับแบบวนรอบ"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"ลำดับเส้นพลาสติกที่กำหนดเอง ซึ่งใช้โดยการจัดลำดับการเปลี่ยนเครื่องมือแบบวนรอบ ระบุเป็นหมายเลขเส้นพลาสติกคั่นด้วยเครื่องหมายจุลภาค (เช่น \"3,2,1,4\")\n"
+"แต่ละเลเยอร์จะพิมพ์เส้นพลาสติกของตนตามลำดับนี้ ส่วนเส้นพลาสติกที่ไม่ได้ระบุไว้จะถูกพิมพ์เป็นลำดับสุดท้ายโดยเรียงจากน้อยไปมาก\n"
+"เว้นว่างไว้เพื่อวนใช้เส้นพลาสติกโดยเรียงจากน้อยไปมาก"
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "ใช้ลำดับแบบวนรอบกับชั้นแรก"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"ใช้ลำดับการเปลี่ยนเครื่องมือแบบวนรอบกับชั้นแรกด้วย\n"
+"โดยค่าเริ่มต้นจะปิดอยู่ เพราะชั้นแรกจะถูกจัดลำดับเพื่อการยึดเกาะฐานพิมพ์ที่ดีที่สุดแทน กล่าวคือ เส้นพลาสติกที่พิมพ์รายละเอียดเล็กและเปราะบางของชั้นแรกจะถูกพิมพ์เป็นลำดับสุดท้าย การเปลี่ยนเครื่องมือและการเดินหัวเปล่าที่ตามมาจึงมีโอกาสน้อยลงที่จะกระแทกชิ้นส่วนที่ยึดเกาะไม่แน่นเหล่านั้นให้หลุด ลำดับของชั้นแรกนี้ยังเคารพลำดับเส้นพลาสติกของชั้นแรกที่กำหนดเองด้วย หากมีการตั้งค่าไว้ ข้อดีของลำดับแบบวนรอบ (การเปลี่ยนเครื่องมือที่เพิ่มขึ้นทำให้แต่ละเลเยอร์มีเวลาเย็นตัวมากขึ้น) ไม่ใช้กับชั้นแรก ซึ่งพิมพ์อย่างช้าและร้อนเพื่อการยึดเกาะ\n"
+"เปิดใช้สิ่งนี้เฉพาะเมื่อคุณต้องการลำดับเครื่องมือที่เหมือนกันทุกประการในทุกเลเยอร์รวมถึงชั้นแรก โดยยอมแลกกับการปรับแต่งการยึดเกาะดังกล่าว"
+
 msgid "Slice gap closing radius"
 msgstr "รัศมีการปิดช่องว่างของ Slice"
 
@@ -16717,9 +16935,6 @@ msgstr "รอยแตกร้าวที่มีขนาดเล็กก
 msgid "Slicing Mode"
 msgstr "โหมดการแบ่งส่วน"
 
-msgid "Other"
-msgstr "อื่นๆ"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "ใช้ \"เลขคู่\" สำหรับโมเดลเครื่องบิน 3DLabPrint ใช้ \"ปิดรู\" เพื่อปิดรูทั้งหมดในโมเดล"
 
@@ -17721,6 +17936,14 @@ msgstr "ไม่มีเช็ค"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "อย่าทำการตรวจสอบความถูกต้องใดๆ เช่น การตรวจสอบข้อขัดแย้งของเส้นทาง G-code"
 
+# AI Translated
+msgid "Strict mode"
+msgstr "โหมดเข้มงวด"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "ออกจากโปรแกรมด้วยค่าที่ไม่ใช่ศูนย์เมื่อการสไลซ์เกิดคำเตือนที่ไม่ร้ายแรง ซึ่งปกติจะถูกบันทึกลงล็อกเท่านั้น เช่น โมเดลที่ต้องการส่วนรองรับขณะที่ปิดส่วนรองรับไว้ ใช้สิ่งนี้ใน CI หรือไปป์ไลน์ที่ทำงานด้วยสคริปต์ซึ่งต้องไม่ส่งมอบผลการสไลซ์ที่เสียหายแบบสังเกตยาก คำเตือนแต่ละรายการดังกล่าวยังถูกแสดงพร้อมคลาสที่คงที่ในอาร์เรย์ `warnings` ของ result.json ซึ่งเขียนเฉพาะบน Linux เท่านั้น ใช้ร่วมกับ --no-check ไม่ได้ เพราะตัวเลือกนั้นข้ามการตรวจสอบส่วนรองรับ"
+
 msgid "Normative check"
 msgstr "การตรวจสอบเชิงบรรทัดฐาน"
 
@@ -17733,11 +17956,28 @@ msgstr "ข้อมูลรุ่นเอาท์พุต"
 msgid "This outputs the model’s information."
 msgstr "ส่งออกข้อมูลของโมเดล"
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "ตรวจสอบเมช (JSON ไปยัง stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "พิมพ์สรุป JSON ของแต่ละวัตถุที่โหลดไว้ไปยัง stdout แล้วออกจากโปรแกรม: กล่องขอบเขตของวัตถุและหน้าของเปลือกนูนที่วัตถุสามารถวางลงได้ พร้อมเวกเตอร์ตั้งฉาก พื้นที่ และจุดศูนย์กลางของหน้าเหล่านั้น หน้าเหล่านี้คือหน้าที่ตัวเลือก --ground-* เลือกใช้ เป็นทางเลือกที่เครื่องอ่านได้แทน --info"
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "ตรวจสอบการระบาย (JSON ไปยัง stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "พิมพ์สรุป JSON แบบมีโครงสร้างของทุกเลเยอร์ที่ระบายไว้ (ส่วนรองรับ, รอยตะเข็บ, สี MMU, ผิวฟัซซี) ซึ่งถูกเก็บไว้ในโมเดลที่โหลดแล้ว — จำนวนหน้า พื้นที่ผิว และกล่องขอบเขตในพิกัดของเมชในแต่ละสถานะ — แล้วออกจากโปรแกรม เป็นทางเลือกที่เครื่องอ่านได้แทนการเปิดเครื่องมือระบายในหน้าจอ"
+
 msgid "Export Settings"
 msgstr "ส่งออกการตั้งค่า"
 
-msgid "This exports settings to a file."
-msgstr "ส่งออกการตั้งค่าไปยังไฟล์"
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "คำสั่งนี้ส่งออกการตั้งค่าไปยังไฟล์ ใช้ - เพื่อเขียนไปยัง stdout"
 
 msgid "Send progress to pipe"
 msgstr "ส่งความคืบหน้าไปป์"
@@ -17793,6 +18033,30 @@ msgstr "หมุนรอบ Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "มุมการหมุนรอบแกน Y มีหน่วยเป็นองศา"
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "วางบนหน้าที่ใหญ่ที่สุด"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "วางแต่ละวัตถุลงบนหน้าที่ใหญ่ที่สุดของเปลือกนูน แล้วปล่อยลงบนฐานพิมพ์ ในบรรดาหน้าที่ใหญ่เท่ากัน จะคงหน้าที่หันลงอยู่แล้วไว้ วัตถุที่ไม่มีหน้าใหญ่พอให้วางได้จะถูกปล่อยไว้ตามเดิม การแปลงรูปทำงานตามลำดับในบรรทัดคำสั่ง การหมุนที่ระบุไว้ก่อนตัวเลือกนี้จึงถูกนำมาใช้ด้วย --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว"
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "วางบนหน้าตามเวกเตอร์ตั้งฉาก"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "วางแต่ละวัตถุลงบนหน้าของเปลือกนูนที่มีเวกเตอร์ตั้งฉากด้านนอกใกล้เคียงทิศทาง NX,NY,NZ มากที่สุด แล้วปล่อยลงบนฐานพิมพ์ ทิศทางนี้อยู่ในพิกัดของวัตถุ ซึ่งรวมการหมุนที่ระบุไว้ก่อนตัวเลือกนี้ และตรงกับแกนของฐานพิมพ์ เว้นแต่ไฟล์นำเข้าจะหมุนวัตถุไว้ ตัวอย่างเช่น 1,0,0 จะตั้งวัตถุขึ้นบนด้าน +X --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว"
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "วางบนหน้าที่จุดที่ระบุ"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "วางแต่ละวัตถุลงบนหน้าของเปลือกนูนที่มีจุด X,Y,Z อยู่ แล้วปล่อยลงบนฐานพิมพ์ จุดนี้อยู่ในพิกัดของวัตถุ ซึ่งรวมการหมุนที่ระบุไว้ก่อนตัวเลือกนี้ โดย --inspect-mesh รายงานจุดศูนย์กลางของหน้าในพิกัดเดียวกันนี้ วัตถุที่ไม่มีหน้าดังกล่าวจะถูกปล่อยไว้ตามเดิม และการทำงานจะล้มเหลวหากไม่มีวัตถุใดมีหน้าเช่นนั้นเลย --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว"
+
 msgid "Scale the model by a float factor."
 msgstr "ปรับขนาดโมเดลตามปัจจัยโฟลต"
 
@@ -20891,6 +21155,18 @@ msgstr "การทำงานนี้ไม่สามารถย้อน
 msgid "Skipping objects."
 msgstr "ข้ามวัตถุ"
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "สัดส่วนวัสดุ"
+
+# AI Translated
+msgid "Model Height"
+msgstr "ความสูงโมเดล"
+
+# AI Translated
+msgid "Ratio"
+msgstr "สัดส่วน"
+
 msgid "Select Filament"
 msgstr "เลือกเส้นพลาสติก"
 
@@ -21147,12 +21423,14 @@ msgid "Drying-Dehumidifying"
 msgstr "อบแห้ง-ลดความชื้น"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " อุณหภูมิอบแห้งสูงสุดคือ "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "อุณหภูมิอบแห้งสูงสุดของ %s คือ %d°C"
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " อุณหภูมิอบแห้งต่ำสุดคือ "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "อุณหภูมิอบแห้งต่ำสุดของ %s คือ %d°C"
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21597,6 +21875,97 @@ msgstr ""
 "หลีกเลี่ยงการบิดเบี้ยว\n"
 "คุณรู้หรือไม่ว่าเมื่อพิมพ์วัสดุที่มีแนวโน้มที่จะเกิดการบิดเบี้ยว เช่น ABS การเพิ่มอุณหภูมิฐานพิมพ์อย่างเหมาะสมสามารถลดความน่าจะเป็นของการบิดเบี้ยวได้"
 
+#~ msgid "Other"
+#~ msgstr "อื่นๆ"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "ซ้าย: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "ขวา: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "อุณหภูมิสูงสุดต้องไม่เกิน "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า"
+
+#~ msgid "up to"
+#~ msgstr "สูงสุด"
+
+#~ msgid "above"
+#~ msgstr "ข้างบน"
+
+#~ msgid "from"
+#~ msgstr "จาก"
+
+#~ msgid "Configuration package: "
+#~ msgstr "แพคเกจการกำหนดค่า:"
+
+#~ msgid " updated to "
+#~ msgstr "อัปเดตเป็น"
+
+#~ msgid "Grouping error: "
+#~ msgstr "ข้อผิดพลาดในการจัดกลุ่ม:"
+
+#~ msgid " can not be placed in the "
+#~ msgstr "ไม่สามารถวางใน"
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " อุณหภูมิอบแห้งสูงสุดคือ "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " อุณหภูมิอบแห้งต่ำสุดคือ "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "ต้องการ"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "ไม่ได้เปิดใช้"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "วัสดุยังไม่ถูกเผยแพร่"
+
+#~ msgid "Select the language"
+#~ msgstr "เลือกภาษา"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "เลือกปลั๊กอิน"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "ทิศทางที่พื้นผิวด้านบนถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n"
+#~ "ออกด้านนอกเริ่มที่กึ่งกลางของพื้นผิว ดังนั้นวัสดุส่วนเกินจะถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในเริ่มที่ขอบและจบด้วยเส้นโค้งแคบที่กึ่งกลาง\n"
+#~ "ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "ทิศทางที่พื้นผิวด้านล่างถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n"
+#~ "เข้าด้านในเริ่มแต่ละพื้นผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยเพิ่มการยึดเกาะเลเยอร์แรกบนฐานพิมพ์ที่เส้นโค้งแคบตรงกลางอาจไม่ติด ออกด้านนอกเริ่มที่กึ่งกลาง โดยดันวัสดุส่วนเกินไปทางขอบ\n"
+#~ "ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้"
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "หากเปิดใช้งาน Wipe Tower จะไม่ถูกพิมพ์บนเลเยอร์โดยไม่มีการเปลี่ยนแปลงเครื่องมือ บนเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงด้านล่างเพื่อพิมพ์ Wipe Tower ผู้ใช้มีหน้าที่รับผิดชอบในการตรวจสอบให้แน่ใจว่าไม่มีการชนกันกับงานพิมพ์"
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "ส่งออกการตั้งค่าไปยังไฟล์"
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Native Wayland liveview ต้องใช้ GStreamer GTK video sink โปรดติดตั้งปลั๊กอิน gtksink สำหรับ GStreamer จากนั้นรีสตาร์ท OrcaSlicer"
 
diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po
index 0e51b7ca9c..39ca72ae0f 100644
--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-08-21 23:18+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -2480,15 +2480,6 @@ msgstr "Kullanılabilir bir güncelleme var. Güncellemek için ön ayar paketi
 msgid "%s has been removed."
 msgstr "%s kaldırıldı."
 
-msgid "Switching application language"
-msgstr "Uygulama dilini değiştirme"
-
-msgid "Select the language"
-msgstr "Dili seçin"
-
-msgid "Language"
-msgstr "Dil"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3736,11 +3727,15 @@ msgstr "Geçerli filamenti Filament Track Switch'te geri çek"
 msgid "Switch track at Filament Track Switch"
 msgstr "Filament Track Switch'te hattı değiştir"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Maksimum sıcaklık şu değeri aşamaz: "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Maksimum sıcaklık %d değerini aşamaz"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Minimum sıcaklık şu değerden az olamaz: "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Minimum sıcaklık %d değerinden az olamaz"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4643,6 +4638,15 @@ msgstr ""
 "Geçici G-code'un çıkış G-code'a kopyalanması başarısız oldu. Belki SD kart yazma kilitlidir.\n"
 "Hata mesajı: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Geçici G-code'un çıktı G-code'a kopyalanması başarısız oldu.\n"
+"Hata mesajı: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Geçici G-code'un çıkış G-code'a kopyalanması başarısız oldu. Hedef cihazda sorun olabilir, lütfen tekrar dışa aktarmayı veya farklı bir cihaz kullanmayı deneyin. Bozuk çıktı G-code %1%.tmp konumunda."
@@ -4949,6 +4953,10 @@ msgstr ""
 "Evet - Bu ayarları değiştirin ve spiral modunu otomatik olarak etkinleştirin\n"
 "Hayır - Bu sefer spiral modunu kullanmaktan vazgeçin"
 
+# AI Translated
+msgid "N/A"
+msgstr "Yok"
+
 msgid "Printing"
 msgstr "Baskı"
 
@@ -5379,14 +5387,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Değer %s aralık dışında. Geçerli aralık %d ile %d arasındadır."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%% mi yoksa %s %s mi?\n"
-"%s%% için EVET,\n"
-"%s %s için HAYIR."
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%% mi yoksa %s %s mi?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5408,30 +5413,22 @@ msgstr "Geçersiz kalıp. N, N#K veya giriş başına isteğe bağlı #K ile vir
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Geçersiz format. Beklenen vektör formatı: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "Yok"
-
 # AI Translated
 msgid "System agents"
 msgstr "Sistem aracıları"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Eklenti seçilmedi"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Eklenti ekle"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Eklenti seç"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Eklentiyi kaldır"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Eklenti seçilmedi"
+
 # AI Translated
 msgid "Configure"
 msgstr "Yapılandır"
@@ -5689,14 +5686,20 @@ msgstr "Optimum'a Ayarla"
 msgid "Regroup filament"
 msgstr "Filamenti yeniden gruplandır"
 
-msgid "up to"
-msgstr "kadar"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "%1% mm'ye kadar"
 
-msgid "above"
-msgstr "üstünde"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "%1% mm üzerinde"
 
-msgid "from"
-msgstr "itibaren"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "%1% mm ile %2% mm arasında"
 
 msgid "Usage"
 msgstr "Kullan"
@@ -6059,7 +6062,7 @@ msgstr "Hacim:"
 msgid "Size:"
 msgstr "Boyut:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "%d katmanında G-code yollarında çakışmalar bulundu, Z = %.2lfmm. Lütfen çakışan nesneleri daha uzağa ayırın (%s <-> %s)."
 
@@ -6372,6 +6375,14 @@ msgstr "Projeyi farklı kaydet"
 msgid "Save current project as"
 msgstr "Mevcut projeyi farklı kaydet"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "3MF Yayınla"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Seçilen ayarların gömülü olduğu bir 3MF dosyası dışa aktar"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "3MF/STL/STEP/SVG/OBJ/AMF'yi içe aktar"
 
@@ -7647,6 +7658,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Alt"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Bu ayar bir eklenti yeteneği türü belirtmiyor."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Bu ayar tanınmayan bir eklenti yeteneği türü belirtiyor: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Eklenti Seçimi"
@@ -8215,6 +8234,14 @@ msgstr "Lütfen bu ön ayarlar içindeki G-code'larının makineye herhangi bir
 msgid "Customized Preset"
 msgstr "Özel Ayar"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Bazı yayınlanan ayarlar uygulanamadı:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Bazı filament yuvaları değiştirildi:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Step dosyasındaki bileşenlerin adı UTF-8 formatında değil!"
 
@@ -8624,6 +8651,21 @@ msgstr "Dilimlenmiş dosyayı şu şekilde kaydedin:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "%s dosyası yazıcının depolama alanına gönderildi ve yazıcıda görüntülenebiliyor."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "3MF dosyasını şu adla yayınla:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Yayınlanan 3MF dosyası dışa aktarılamadı.\n"
+"Lütfen klasörün çevrimiçi olarak var olup olmadığını veya dosyanın başka programlarda açık olup olmadığını kontrol edin."
+
+msgid "Publish"
+msgstr "Yayınla"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Nozul tipi ayarlanmamış. Lütfen nozulu ayarlayın ve tekrar deneyin."
 
@@ -8837,9 +8879,6 @@ msgstr "Devam etmek istiyor musun?"
 msgid "Language selection"
 msgstr "Dil seçimi"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Bazı ön ayarlar değiştirilirken uygulama dilinin değiştirilmesi."
-
 msgid "Asia-Pacific"
 msgstr "Asya Pasifik"
 
@@ -8944,6 +8983,9 @@ msgstr "Mevcut Örnek Yolu: "
 msgid "General"
 msgstr "Genel"
 
+msgid "Language"
+msgstr "Dil"
+
 msgid "Metric"
 msgstr "Metrik"
 
@@ -9408,9 +9450,6 @@ msgstr "Dilimlenmiş önizlemede katman kaydırıcısı gezdirilirken, geçerli
 msgid "Dimmed layer brightness"
 msgstr "Karartılmış katman parlaklığı"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9811,9 +9850,6 @@ msgstr "Model yayınlama web sayfasına git"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Not: Hazırlık birkaç dakika sürebilir. Lütfen sabırlı olun."
 
-msgid "Publish"
-msgstr "Yayınla"
-
 msgid "Publish was canceled"
 msgstr "Yayınlama iptal edildi"
 
@@ -9829,6 +9865,81 @@ msgstr "Veriler yükleniyor"
 msgid "Jump to webpage"
 msgstr "Web sayfasına atla"
 
+# AI Translated
+msgid "Material"
+msgstr "Malzeme"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Karışık filament"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Bazı karışık filamentler, yayınlanmayacak filamentlere bağlıdır:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (karışık)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% için %2% gerekiyor, ancak o etkin değil."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% için %2% gerekiyor, ancak malzemesi yayınlanmayacak."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Bir karışık filamenti yayınlamak için kullandığı her filamenti etkinleştirin ve Tam Yayınlama'yı seçin ya da Tür gereksinimini karşılayın."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Yine de yayınla"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "3MF Yayınla..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "3MF dosyasında hangi ayarların yayınlanacağını seçin"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "3MF Yayınlama Wiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "3MF Yayınlama Video Kılavuzu"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Karışık filament - yukarıdaki \"Aktif et\" seçildiğinde bir bütün olarak yayınlanır"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Bu karışık filamenti yayınla ve bileşen filamentlerini etkinleştir + tam olarak yayınla"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Bu filament yuvasını 3MF dosyasında yayınla"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Tam Yayınlama"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Bu yuvadaki filamentin tamamını 3MF dosyasına göm"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Seçilmeyenleri filtrele"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "%s'yi farklı kaydet"
@@ -9846,6 +9957,10 @@ msgstr "Üst ön ayardan devralınan tüm değerleri bu ön ayara kopyalar ve ü
 msgid "Detach from parent"
 msgstr "Ebeveynden ayrıl"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Ebeveyn olmadan kaydet"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Bağımsız ön ayar"
@@ -10560,9 +10675,17 @@ msgstr "Topaklanma tespiti için bir ana kule gereklidir. Prime tower olmayan mo
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Hem hassas Z yüksekliğini hem de hazırlık kulesini etkinleştirmek dilimleme hatalarına neden olabilir. Yine de hassas Z yüksekliğini etkinleştirmek istiyor musunuz?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Pürüzsüz timelapse her katmanda bir prime kulesi gerektirir; bu da \"Seyrek katman yok\" ile bağdaşmaz. \"Seyrek katman yok\" kapatıldı."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Sorunsuz hızlandırılmış çekim için Prime Tower gereklidir. Prime tower olmayan modelde kusurlar olabilir. Prime tower'ı etkinleştirmek istiyor musunuz?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Seyrek katman yok\", her katmanda bir prime kulesi gerektiren pürüzsüz timelapse ile bağdaşmaz. Timelapse geleneksel moda geçirildi."
+
 msgid "Still print by object?"
 msgstr "Hala nesneye göre yazdırıyor musunuz?"
 
@@ -10941,9 +11064,6 @@ msgstr "Uyumlu süreç profilleri"
 msgid "Printable space"
 msgstr "Plaka Ayarı"
 
-msgid "Printer Agent"
-msgstr "Yazıcı Aracısı"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Yazıcı iletişimi için ağ aracısı uygulamasını seçin. Kullanılabilir aracılar başlangıçta kaydedilir."
 
@@ -11364,14 +11484,6 @@ msgstr "Ekstruder sayısı"
 msgid "Capabilities"
 msgstr "Yetenekler"
 
-# AI Translated
-msgid "Left: "
-msgstr "Sol: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Sağ: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Tüm ön ayarları göster (uyumsuz olanlar dahil)"
 
@@ -12221,15 +12333,22 @@ msgstr "Onarım iptal edildi"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "%1% dosyasının %2% dosyasına kopyalanması başarısız oldu: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Yeni satıcı profilleri indiriliyor: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Yapılandırma paketi: %1% sürüm %2% olarak güncellendi"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Satıcı profilleri indirilemedi: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Yapılandırma güncellemelerinden önce kaydedilmemiş değişiklikleri kontrol etmeniz gerekir."
 
-msgid "Configuration package: "
-msgstr "Yapılandırma paketi: "
-
-msgid " updated to "
-msgstr " güncellendi "
-
 msgid "Open G-code file:"
 msgstr "G-code dosyasını açın:"
 
@@ -12294,11 +12413,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping yalnızca Klipper, RepRapFirmware ve Marlin 2 tarafından desteklenir."
 
-msgid "Grouping error: "
-msgstr "Gruplama hatası: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Gruplama hatası: %1% sol nozula yerleştirilemez"
 
-msgid " can not be placed in the "
-msgstr " içine yerleştirilemez "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Gruplama hatası: %1% sağ nozula yerleştirilemez"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12413,6 +12536,10 @@ msgstr "%1% diğerlerine çok yakın ve çarpışmalara neden olabilir."
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% çok uzun ve çarpışmalara neden olacak."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Modelin ve prime kulesinin göreli konumu \"Seyrek katman yok\" özelliğinin gereksinimlerini karşılamıyor. Lütfen göreli konumlarını ayarlayın, model yüksekliğini azaltın veya \"Seyrek katman yok\" seçeneğini kapatın."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " Hariç tutma alanına çok yakın olduğundan yazdırma sırasında çarpışmalar meydana gelebilir."
 
@@ -12778,6 +12905,9 @@ msgstr "G-code yerine 3MF kullan"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Yazıcı, baskı işi olarak 3MF dosyası kabul ediyorsa bunu etkinleştirin. Etkinleştirildiğinde Orca Slicer, dilimlenmiş dosyayı düz bir .gcode dosyası yerine .gcode.3mf olarak gönderir."
 
+msgid "Printer Agent"
+msgstr "Yazıcı Aracısı"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "Yazıcı iletişimi için ağ aracısı uygulamasını seçin."
 
@@ -13848,6 +13978,10 @@ msgstr "Hizalanmış doğrusal"
 msgid "Concentric"
 msgstr "Konsantrik"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Spiral içe"
+
 msgid "Hilbert Curve"
 msgstr "Hilbert eğrisi"
 
@@ -13939,12 +14073,12 @@ msgstr "Üst yüzey doldurma sırası"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken üst yüzeylerin doldurulma yönü.\n"
-"Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme en az göründüğü kenara doğru itilir. İçeri kenardan başlar ve merkezdeki dar kavislerle biter.\n"
+"Merkezden başlayan bir desen kullanıldığında üst yüzeylerin doldurulma yönü (Konsantrik, Spiral içe, Arşimet akorları, Sekizgen spiral).\n"
+"Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme, en az göründüğü kenara doğru itilir. İçeri, kenardan başlar ve merkezdeki dar kavislerle biter.\n"
 "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır."
 
 # AI Translated
@@ -13953,12 +14087,12 @@ msgstr "Alt yüzey doldurma sırası"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken alt yüzeylerin doldurulma yönü.\n"
-"İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin yapışmayabileceği yapı plakalarında ilk katman yapışmasını iyileştirir. Dışarı merkezden başlar ve fazla malzemeyi kenara doğru iter.\n"
+"Merkezden başlayan bir desen kullanıldığında alt yüzeylerin doldurulma yönü (Konsantrik, Spiral içe, Arşimet akorları, Sekizgen spiral).\n"
+"İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin tutunamayabileceği yataklarda ilk katman yapışmasını iyileştirir. Dışarı, merkezden başlar ve fazla malzemeyi kenara doğru iter.\n"
 "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır."
 
 msgid "Internal solid infill pattern"
@@ -14064,6 +14198,14 @@ msgstr "Saat yönünün tersine"
 msgid "Clockwise"
 msgstr "Saat yönünde"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Mile mesafe"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Nozul ucunun milin uzak kenarına olan yatay mesafesi. Nesneye göre baskıda çarpışmalardan kaçınmak için kullanılır."
+
 msgid "Height to rod"
 msgstr "Çubuğa kadar olan yükseklik"
 
@@ -16283,6 +16425,20 @@ msgstr "Çıkıntılı duvarı algıla"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Çizgi genişliğine göre çıkıntı yüzdesini tespit edin ve yazdırmak için farklı hızlar kullanın. %%100 çıkıntı için köprü hızı kullanılır."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Desteklenmeyen duvarları en son yazdır"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Tamamen havada kalan duvar döngüleri, ancak onları tutabilecek bir şey oluştuğunda yazdırılır:\n"
+"duvar sırası ne olursa olsun, kendi adasındaki diğer duvarlardan sonra, en içtekinden başlayarak ekstrüde edilirler.\n"
+"Yalnızca bu katmanın köprülerinin sabitleyebileceği bir döngü, o köprüler yazdırılana kadar bekler; desteklenen bir duvar boyunca uzanan bir döngü ise, kendisine sabitleme olarak ihtiyaç duyan dolgudan önceki yerini korur."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Dış duvarlar"
@@ -16731,6 +16887,39 @@ msgstr "Döngülerde temizleme"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Kapalı döngü ekstrüzyonda dikişin görünürlüğünü en aza indirmek için, ekstruder döngüden ayrılmadan önce içeriye doğru küçük bir hareket gerçekleştirilir."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "İçeri temizleme"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Yalnızca delik sınırları dahil olmak üzere dış duvarlara uygulanır. Temizleme sırasında sıcak nozulu yazdırılmış iç duvarlara doğru hareket ettirerek yeni yazdırılmış plastiğin yeniden ısınmasını ve dikiş izlerini azaltır.\n"
+"\n"
+"Özellikle temizleme izlerinin daha belirgin olduğu 0,1 mm'nin altındaki katman yüksekliklerinde yararlıdır.\n"
+"\n"
+"Yazdırılmış bitişik bir iç duvar yoksa (tek duvarlı alanlar veya Dış/İç duvar sırası) ya da örneğin dar köşelerde veya dikiş boşluklarında desteklenen bir içeri yol bulunamazsa normal temizlemeyi kullanır."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "İçeri temizleme mesafesi"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Temizleme yolunun dış çevreden uzağa kaydırıldığı mesafe; milimetre cinsinden veya dış duvarın gerçek ekstrüzyon genişliğinin yüzdesi olarak belirtilir.\n"
+"\n"
+"Örneğin 50%, yolu dış duvar genişliğinin yarısı kadar kaydırır. Etkin kaydırma, hem dış duvarın gerçek genişliğiyle hem de bitişik duvara olan mevcut boşlukla sınırlıdır; bu nedenle 100% üzerindeki değerlerin veya buna denk bir mutlak mesafenin ek bir etkisi olmaz. Kaydırmayı devre dışı bırakmak için 0 girin."
+
 msgid "Wipe before external loop"
 msgstr "Harici döngüden önce silin"
 
@@ -16997,8 +17186,9 @@ msgstr "Yeni takımı baskı sıcaklığına ulaşmasını beklemeden alır, sil
 msgid "No sparse layers (beta)"
 msgstr "Seyrek katman yok (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmayacaktır. Araç değişimi olan katmanlarda, ekstruder silme kulesini yazdırmak için aşağı doğru hareket edecektir. Baskı ile çarpışma olmamasını sağlamak kullanıcının sorumluluğundadır."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmaz. Araç değişimi olan katmanlarda ekstruder silme kulesini yazdırmak için aşağı doğru hareket eder; böylece kule modelin altında kalır ve baskı kafasının ona uzanması gerekir. Bunun daha önce yazdırılmış bir nesneyle çarpışmasına yol açacak yerleşimler reddedilir. Her katmanda bir kule gerektiren pürüzsüz timelapse veya nozul birikme algılamayla birlikte etkisi yoktur."
 
 msgid "Prime all printing extruders"
 msgstr "Tüm ekstruderleri temizle"
@@ -17024,6 +17214,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Döngüsel"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Döngüsel sıra"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Döngüsel araç değiştirme sıralamasının kullandığı özel filament dizisi; virgülle ayrılmış filament numaraları olarak (örn. \"3,2,1,4\").\n"
+"Her katman filamentlerini bu diziye göre yazdırır; listelenmeyen filamentler en son, artan sırada yazdırılır.\n"
+"Filamentleri artan sırada dolaşmak için boş bırakın."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Döngüsel sırayı ilk katmana uygula"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Döngüsel araç değiştirme sırasını ilk katmana da uygular.\n"
+"Varsayılan olarak kapalıdır, çünkü ilk katman bunun yerine en iyi tabla yapışması için sıralanır: ilk katmanın küçük, kırılgan ayrıntılarını yazdıran filamentler en son yazdırılır; böylece sonraki araç değişimleri ve seyahat hareketlerinin bu zayıf tutunan parçaları koparma olasılığı azalır. Bu ilk katman sırası, ayarlanmışsa özel bir ilk katman filament dizisini de dikkate alır. Döngüsel sıranın faydası (fazladan araç değişimleri her katmana soğuması için daha fazla süre tanır) yapışma için yavaş ve sıcak yazdırılan ilk katman için geçerli değildir.\n"
+"Bunu yalnızca her katmanda, ilki dahil, tam olarak aynı araç dizisine ihtiyaç duyuyorsanız, söz konusu yapışma optimizasyonundan vazgeçerek etkinleştirin."
+
 msgid "Slice gap closing radius"
 msgstr "Dilim aralığı kapanma yarıçapı"
 
@@ -17033,9 +17251,6 @@ msgstr "Üçgen mesh dilimleme sırasında 2x boşluk kapatma yarıçapından k
 msgid "Slicing Mode"
 msgstr "Dilimleme modu"
 
-msgid "Other"
-msgstr "Diğer"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "3DLabPrint uçak modelleri için \"Çift-tek\" seçeneğini kullanın. Modeldeki tüm delikleri kapatmak için \"Delikleri kapat\"ı kullanın."
 
@@ -18051,6 +18266,14 @@ msgstr "Kontrol yok"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "G-code yol çakışmaları kontrolü gibi herhangi bir geçerlilik kontrolü çalıştırmayın."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Katı mod"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Dilimleme, aksi halde yalnızca günlüğe yazılacak kritik olmayan bir uyarı verdiğinde sıfırdan farklı bir kodla çıkar; örneğin destek kapalıyken desteğe ihtiyaç duyan bir model. Bunu, fark edilmesi güç biçimde bozuk bir dilimlemeyi asla teslim etmemesi gereken CI veya betikli iş akışlarında kullanın. Bu tür her uyarı ayrıca, yalnızca Linux'ta yazılan result.json dosyasının `warnings` dizisinde kararlı bir sınıfla listelenir. Destek kontrolünü atlayan --no-check ile birlikte kullanılamaz."
+
 msgid "Normative check"
 msgstr "Normatif kontrol"
 
@@ -18063,11 +18286,28 @@ msgstr "Çıktı Model Bilgileri"
 msgid "This outputs the model’s information."
 msgstr "Modelin bilgilerini çıktıla."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Ağı incele (stdout'a JSON)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Yüklenen her nesnenin JSON özetini stdout'a yazar ve ardından çıkar: sınırlayıcı kutuları ve üzerine yatırılabileceği dışbükey kabuk yüzleri ile bunların normalleri, alanları ve merkezleri. --ground-* seçeneklerinin arasından seçim yaptığı yüzler bunlardır. --info seçeneğinin makine tarafından okunabilir alternatifi."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Boyamayı incele (stdout'a JSON)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Yüklenen modelde halihazırda saklanan her boyalı katmanın (destekler, dikiş, MMU rengi, pütürlü yüzey) yapılandırılmış bir JSON özetini — duruma göre yüzey sayısı, yüzey alanı ve ağa göre sınırlayıcı kutu — yazar ve ardından çıkar. Arayüzde boyama araçlarını açmanın makine tarafından okunabilir alternatifi."
+
 msgid "Export Settings"
 msgstr "Dışa Aktarma Ayarları"
 
-msgid "This exports settings to a file."
-msgstr "Ayarları bir dosyaya aktarın."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Bu, ayarları bir dosyaya aktarır. stdout'a yazmak için - kullanın."
 
 msgid "Send progress to pipe"
 msgstr "İlerlemeyi kanala gönder"
@@ -18123,6 +18363,30 @@ msgstr "Y etrafında döndür"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Y ekseni etrafında derece cinsinden dönüş açısı."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "En büyük yüze yatır"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Her nesneyi dışbükey kabuğunun en büyük yüzüne yatırır ve yatağa bırakır. Eşit büyüklükteki yüzler arasından zaten aşağı bakan yüz korunur. Üzerine oturacak kadar büyük bir yüzü olmayan nesneler olduğu gibi bırakılır. Dönüşümler komut satırı sırasına göre çalışır; bu nedenle bu seçenekten önce verilen döndürmeler dikkate alınır. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Normale göre yüze yatır"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Her nesneyi, dışa bakan normali NX,NY,NZ yönüne en yakın olan dışbükey kabuk yüzüne yatırır ve yatağa bırakır. Yön, bu seçenekten önce verilen döndürmeleri içeren ve giriş dosyası nesneyi döndürmediği sürece tabla eksenleriyle örtüşen nesne koordinatlarındadır. Örneğin 1,0,0 nesneyi +X tarafına dikey olarak oturtur. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Noktadaki yüze yatır"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Her nesneyi, X,Y,Z noktasını içeren dışbükey kabuk yüzüne yatırır ve yatağa bırakır. Nokta, bu seçenekten önce verilen döndürmeleri içeren nesne koordinatlarındadır; --inspect-mesh yüz merkezlerini bu koordinatlarda bildirir. Böyle bir yüzü olmayan nesneler olduğu gibi bırakılır ve hiçbir nesnede böyle bir yüz yoksa çalışma başarısız olur. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir."
+
 msgid "Scale the model by a float factor."
 msgstr "Modeli kayan nokta faktörüne göre ölçeklendirin."
 
@@ -21318,6 +21582,18 @@ msgstr "Bu eylem geri alınamaz. Devam etmek?"
 msgid "Skipping objects."
 msgstr "Nesneleri atlama."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Malzeme Oranı"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Model Yüksekliği"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Oran"
+
 msgid "Select Filament"
 msgstr "Filament Seçin"
 
@@ -21600,12 +21876,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Kurutma-Nem Alma"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " için maksimum kurutma sıcaklığı "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s için maksimum kurutma sıcaklığı %d°C'dir."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " için minimum kurutma sıcaklığı "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s için minimum kurutma sıcaklığı %d°C'dir."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22052,6 +22330,97 @@ msgstr ""
 "Eğilmeyi önleyin\n"
 "ABS gibi bükülmeye yatkın malzemelere baskı yaparken, ısıtma yatağı sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını azaltabileceğini biliyor muydunuz?"
 
+#~ msgid "Other"
+#~ msgstr "Diğer"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Sol: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Sağ: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Maksimum sıcaklık şu değeri aşamaz: "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Minimum sıcaklık şu değerden az olamaz: "
+
+#~ msgid "up to"
+#~ msgstr "kadar"
+
+#~ msgid "above"
+#~ msgstr "üstünde"
+
+#~ msgid "from"
+#~ msgstr "itibaren"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Yapılandırma paketi: "
+
+#~ msgid " updated to "
+#~ msgstr " güncellendi "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Gruplama hatası: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " içine yerleştirilemez "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " için maksimum kurutma sıcaklığı "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " için minimum kurutma sıcaklığı "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "şunu gerektirir"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "etkin değil"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "malzeme yayınlanmadı"
+
+#~ msgid "Select the language"
+#~ msgstr "Dili seçin"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Eklenti seç"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken üst yüzeylerin doldurulma yönü.\n"
+#~ "Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme en az göründüğü kenara doğru itilir. İçeri kenardan başlar ve merkezdeki dar kavislerle biter.\n"
+#~ "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken alt yüzeylerin doldurulma yönü.\n"
+#~ "İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin yapışmayabileceği yapı plakalarında ilk katman yapışmasını iyileştirir. Dışarı merkezden başlar ve fazla malzemeyi kenara doğru iter.\n"
+#~ "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmayacaktır. Araç değişimi olan katmanlarda, ekstruder silme kulesini yazdırmak için aşağı doğru hareket edecektir. Baskı ile çarpışma olmamasını sağlamak kullanıcının sorumluluğundadır."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Ayarları bir dosyaya aktarın."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Yerel Wayland canlı görüntüsü, GStreamer GTK video alıcısını gerektirir. Lütfen GStreamer için gtksink eklentisini yükleyin ve ardından OrcaSlicer'ı yeniden başlatın."
diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po
index 3d23f7bbb1..9232201869 100644
--- a/localization/i18n/uk/OrcaSlicer_uk.po
+++ b/localization/i18n/uk/OrcaSlicer_uk.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-07-17 16:25+0300\n"
 "Last-Translator: Andrij Mizyk <andm1zyk@proton.me>\n"
 "Language-Team: Ukrainian\n"
@@ -2424,15 +2424,6 @@ msgstr "Доступне оновлення. Відкрийте вікно на
 msgid "%s has been removed."
 msgstr "%s вилучено."
 
-msgid "Switching application language"
-msgstr "Зміна мови програми"
-
-msgid "Select the language"
-msgstr "Вибрати мову"
-
-msgid "Language"
-msgstr "Мова"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "Не вдалося перемкнути Orca Slicer на мову %s."
@@ -3668,11 +3659,15 @@ msgstr "Відвести назад поточний філамент на Filam
 msgid "Switch track at Filament Track Switch"
 msgstr "Перемкнути доріжку на Filament Track Switch"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "Максимальна температура не повинна перевищувати "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Максимальна температура не повинна перевищувати %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "Мінімальна температура не повинна бути нижчою ніж "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Мінімальна температура не повинна бути нижчою ніж %d"
 
 msgid "Type to filter..."
 msgstr "Вводьте для фільтру..."
@@ -4579,6 +4574,15 @@ msgstr ""
 "Не вдалося скопіювати тимчасовий G-код у місцезнаходження вихідного файлу G-коду. Чи може ваша SD карта захищена від запису?\n"
 "Повідомлення про помилку: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Не вдалося скопіювати тимчасовий G-код у вихідний G-код.\n"
+"Повідомлення про помилку: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Не вдалося скопіювати тимчасовий G-код у вихідний G-код. Можливо, проблема з цільовим пристроєм, спробуйте експортувати ще раз або використати інший пристрій. Пошкоджений вихідний G-код - %1% .tmp."
@@ -4887,6 +4891,9 @@ msgstr ""
 "Так – змінити ці налаштування та автоматично включити режим спіральна ваза\n"
 "Ні - цього разу відмовитися від використання режиму спіральна ваза"
 
+msgid "N/A"
+msgstr "Н/Д"
+
 msgid "Printing"
 msgstr "Друк"
 
@@ -5328,14 +5335,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Значення %s знаходиться за межами діапазону. Дійсний діапазон від %d до %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Це %s%% або %s %s?\n"
-"ТАК для %s%%, \n"
-"НІ для %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Це %s%% або %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5358,29 +5362,22 @@ msgstr "Некоректний шаблон. Використовуйте N, N#K
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Невірний формат. Очікуваний векторний формат: \"%1%\""
 
-msgid "N/A"
-msgstr "Н/Д"
-
 # AI Translated
 msgid "System agents"
 msgstr "Системні агенти"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Плагін не вибрано"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Додати плагін"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Вибрати плагін"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Вилучити плагін"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Плагін не вибрано"
+
 # AI Translated
 msgid "Configure"
 msgstr "Налаштувати"
@@ -5646,14 +5643,20 @@ msgstr "Встановити до оптимального"
 msgid "Regroup filament"
 msgstr "Перегрупувати філамент"
 
-msgid "up to"
-msgstr "аж до"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "до %1% мм"
 
-msgid "above"
-msgstr "вище"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "вище %1% мм"
 
-msgid "from"
-msgstr "від"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "від %1% до %2% мм"
 
 msgid "Usage"
 msgstr "Використання"
@@ -6018,7 +6021,7 @@ msgid "Size:"
 msgstr "Розмір:"
 
 # AI Translated
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Виявлено конфлікти шляхів G-коду на шарі %d, Z = %.2lf мм. Будь ласка, рознесіть конфліктуючі обʼєкти далі один від одного (%s <-> %s)."
 
@@ -6341,6 +6344,14 @@ msgstr "Зберегти проєкт як"
 msgid "Save current project as"
 msgstr "Зберегти поточний проєкт як"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Публікувати 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Експортувати файл 3MF із вбудованими вибраними налаштуваннями"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Імпорт 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7631,6 +7642,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Низ"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Це налаштування не вказує тип можливості плагіна."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Це налаштування вказує нерозпізнаний тип можливості плагіна: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Вибір плагіна"
@@ -8223,6 +8242,14 @@ msgstr "Будь ласка, підтвердьте, що G-коди в цих 
 msgid "Customized Preset"
 msgstr "Пристосований пресет"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Деякі опубліковані налаштування не вдалося застосувати:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Деякі слоти філаменту було змінено:"
+
 # AI Translated
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Назви компонентів усередині файлу STEP не у форматі UTF-8!"
@@ -8635,6 +8662,21 @@ msgstr "Зберегти нарізаний файл як:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "Файл %s надіслано до памʼяті принтера та доступний для перегляду на принтері."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Публікувати файл 3MF як:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Не вдалося експортувати опублікований файл 3MF.\n"
+"Перевірте, чи доступна тека онлайн і чи не відкрито файл в інших програмах."
+
+msgid "Publish"
+msgstr "Публікувати"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Тип сопла не встановлений. Будь ласка, оберіть сопло та спробуйте ще раз."
 
@@ -8851,9 +8893,6 @@ msgstr "Ви хочете продовжувати?"
 msgid "Language selection"
 msgstr "Вибір мови"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Зміна мови програми при зміні деяких профілів."
-
 msgid "Asia-Pacific"
 msgstr "Азіатсько-Тихоокеанський регіон"
 
@@ -8961,6 +9000,9 @@ msgstr "Шлях Поточної Інсталяції: "
 msgid "General"
 msgstr "Загальні"
 
+msgid "Language"
+msgstr "Мова"
+
 msgid "Metric"
 msgstr "Метрика"
 
@@ -9421,9 +9463,6 @@ msgstr "Під час прокручування повзунка шарів у
 msgid "Dimmed layer brightness"
 msgstr "Яскравість затемнених шарів"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9814,9 +9853,6 @@ msgstr "Перейти на веб-сторінку публікації мод
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Примітка. Підготовка може тривати кілька хвилин. Будь ласка, будьте терплячі."
 
-msgid "Publish"
-msgstr "Публікувати"
-
 msgid "Publish was canceled"
 msgstr "Публікація скасована"
 
@@ -9832,6 +9868,81 @@ msgstr "Відвантаження даних"
 msgid "Jump to webpage"
 msgstr "Перейти на вебсторінку"
 
+# AI Translated
+msgid "Material"
+msgstr "Матеріал"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Змішаний філамент"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Деякі змішані філаменти залежать від філаментів, які не будуть опубліковані:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Філамент %d (змішаний)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% потребує %2%, але його не ввімкнено."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% потребує %2%, але його матеріал не буде опубліковано."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Щоб опублікувати змішаний філамент, увімкніть кожен філамент, який він використовує, і виберіть «Повна публікація» або виконайте його вимогу «Тип»."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Опублікувати попри це"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Публікувати 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Виберіть, які налаштування буде опубліковано у файлі 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Енциклопедія з публікації 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Відеопосібник з публікації 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Змішаний філамент — публікується цілком, коли вище вибрано «Увімкнути»"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Опублікувати цей змішаний філамент та увімкнути + повністю опублікувати його складові філаменти"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Опублікувати цей слот філаменту у файлі 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Повна публікація"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Вбудувати весь філамент цього слота у файл 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Фільтрувати невибрані"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Зберегти %s як"
@@ -9850,6 +9961,10 @@ msgstr "Копіює в цей пресет усі значення, успад
 msgid "Detach from parent"
 msgstr "Відʼєднати від батьківського"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Зберегти без батьківського"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Незалежний пресет"
@@ -10589,10 +10704,18 @@ msgstr "Для виявлення налипання потрібна підго
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Одночасне увімкнення точної висоти Z та підготовчої вежі може спричинити помилки нарізки. Ви все одно хочете увімкнути точну висоту Z?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Плавний таймлапс потребує підготовчої вежі на кожному шарі, що несумісно з параметром «Без розріджених шарів». Параметр «Без розріджених шарів» вимкнено."
+
 # AI Translated
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Для плавного таймлапсу потрібна підготовча вежа. Без підготовчої вежі на моделі можуть виникати дефекти. Ви хочете увімкнути підготовчу вежу?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "Параметр «Без розріджених шарів» несумісний із плавним таймлапсом, який потребує підготовчої вежі на кожному шарі. Таймлапс перемкнено в традиційний режим."
+
 msgid "Still print by object?"
 msgstr "Все одно друкувати кожен обʼєкт окремо?"
 
@@ -10983,9 +11106,6 @@ msgstr "Сумісні профілі процесів"
 msgid "Printable space"
 msgstr "Місце для друку"
 
-msgid "Printer Agent"
-msgstr "Агент принтера"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером. Доступні агенти реєструються під час запуску."
@@ -11409,12 +11529,6 @@ msgstr "Кількість екструдерів"
 msgid "Capabilities"
 msgstr "Можливості"
 
-msgid "Left: "
-msgstr "Лівий: "
-
-msgid "Right: "
-msgstr "Правий: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Показувати всі профілі (включаючи несумісні)"
 
@@ -12279,16 +12393,23 @@ msgstr "Ремонт скасовано"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Копіювання %1% у %2% не вдалося: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Завантаження нових профілів виробників: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Пакет конфігурації: %1% оновлено до %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Не вдалося завантажити профілі виробників: "
+
 # AI Translated
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Будь ласка, перевірте незбережені зміни перед оновленням конфігурації."
 
-msgid "Configuration package: "
-msgstr "Пакет конфігурації: "
-
-msgid " updated to "
-msgstr " оновлено до "
-
 msgid "Open G-code file:"
 msgstr "Відкрити файл G-коду:"
 
@@ -12353,11 +12474,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input Shaping підтримується лише Klipper, RepRapFirmware і Marlin 2."
 
-msgid "Grouping error: "
-msgstr "Помилка групування: "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Помилка групування: %1% не можна розмістити в лівому соплі"
 
-msgid " can not be placed in the "
-msgstr " не можливо помістити у "
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Помилка групування: %1% не можна розмістити в правому соплі"
 
 msgid "Group error in manual mode. Please check nozzle count or regroup."
 msgstr "Помилка групування в ручному режимі. Перевірте кількість сопел або перегрупуйте."
@@ -12471,6 +12596,10 @@ msgstr "%1% знаходиться надто близько до інших, щ
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% занадто високий, і можуть виникнути зіткнення."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Взаємне розташування моделі та підготовчої вежі не відповідає вимогам функції «Без розріджених шарів». Змініть їхнє взаємне розташування, зменште висоту моделі або вимкніть параметр «Без розріджених шарів»."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " знаходиться надто близько до зони відчуження, при друку можуть виникати колізії."
 
@@ -12849,6 +12978,9 @@ msgstr "Використовувати 3MF замість G-коду"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Увімкніть, якщо принтер приймає файл 3MF як завдання друку. Якщо увімкнено, Orca Slicer надсилає нарізаний файл як .gcode.3mf замість звичайного файлу .gcode."
 
+msgid "Printer Agent"
+msgstr "Агент принтера"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером."
@@ -13944,6 +14076,10 @@ msgstr "Вирівняний прямолінійний"
 msgid "Concentric"
 msgstr "Концентричний"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Спіральний відступ"
+
 msgid "Hilbert Curve"
 msgstr "Крива Гільберта"
 
@@ -14034,13 +14170,13 @@ msgstr "Порядок заповнення верхньої поверхні"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Напрямок, у якому заповнюються верхні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n"
-"Назовні починає з центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Усередину починає з краю та завершується щільними кривими в центрі.\n"
-"Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку."
+"Напрямок заповнення верхніх поверхонь під час використання шаблону, що йде від центру (Концентричний, Спіральний відступ, Хорди Архімеда, Спіральна октограма).\n"
+"Назовні починає від центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Всередину починає від краю й завершується тісними вигинами в центрі.\n"
+"Типово використовується порядок за найкоротшим шляхом, який може йти в будь-якому напрямку."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -14048,13 +14184,13 @@ msgstr "Порядок заповнення нижньої поверхні"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Напрямок, у якому заповнюються нижні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n"
-"Усередину починає кожну поверхню з ширших зовнішніх кривих, що покращує зчеплення першого шару на столах, де щільні криві в центрі можуть не прилипати. Назовні починає з центру, виштовхуючи надлишок матеріалу до краю.\n"
-"Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку."
+"Напрямок заповнення нижніх поверхонь під час використання шаблону, що йде від центру (Концентричний, Спіральний відступ, Хорди Архімеда, Спіральна октограма).\n"
+"Всередину починає кожну поверхню з ширших зовнішніх вигинів, що поліпшує прилипання першого шару до столів, до яких тісні вигини в центрі можуть не приставати. Назовні починає від центру, виштовхуючи надлишок матеріалу до краю.\n"
+"Типово використовується порядок за найкоротшим шляхом, який може йти в будь-якому напрямку."
 
 msgid "Internal solid infill pattern"
 msgstr "Шаблон внутрішнього суцільного заповнення"
@@ -14159,6 +14295,14 @@ msgstr "Проти годинникової стрілки"
 msgid "Clockwise"
 msgstr "За годинниковою стрілкою"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Відстань до штанги"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Горизонтальна відстань від кінчика сопла до дальшого краю штанги. Використовується для уникнення зіткнень під час друку по обʼєктах."
+
 msgid "Height to rod"
 msgstr "Висота до сопла"
 
@@ -16466,6 +16610,20 @@ msgstr "Виявлення стінок що нависають"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Визначити відсоток нависання відносно до ширини лінії та використовувати для друку іншу швидкість. Для 100%%-вого нависання використовується швидкість моста."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "Друкувати неопорні стінки останніми"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Контури стінок, що повністю висять у повітрі, друкуються лише тоді, коли їх є чим утримати:\n"
+"вони екструдуються після інших стінок свого острова, починаючи з найвнутрішнішої, незалежно від порядку стінок.\n"
+"Контур, який можуть закріпити лише мости цього шару, чекає, доки ці мости буде надруковано, тоді як контур, що йде вздовж опертої стінки, зберігає своє місце перед заповненням, якому він потрібен як якір."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Зовнішні стінки"
@@ -16912,6 +17070,39 @@ msgstr "Протирати на контурах"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Щоб звести до мінімуму видимість шва при екструзії із замкнутим контуром,Невеликий рух усередину виконується до виходу екструдера з контуру."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Протирання всередину"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Застосовується лише до зовнішніх стінок, зокрема до контурів отворів. Під час протирання переміщує гаряче сопло до вже надрукованих внутрішніх стінок, щоб зменшити повторне нагрівання щойно надрукованого пластику та сліди шва.\n"
+"\n"
+"Особливо корисно за висоти шару менше 0,1 мм, де сліди протирання помітніші.\n"
+"\n"
+"Використовує звичайне протирання, якщо поруч немає вже надрукованої внутрішньої стінки (ділянки з однією стінкою або порядок стінок Зовнішня/Внутрішня) або якщо не вдається знайти опертий шлях усередину, наприклад у тісних кутах чи розривах шва."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Відстань протирання всередину"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Відстань, на яку шлях протирання зміщується від зовнішнього контуру, задається в міліметрах або у відсотках від фактичної ширини екструзії зовнішньої стінки.\n"
+"\n"
+"Наприклад, 50% зміщує шлях на половину ширини зовнішньої стінки. Фактичне зміщення обмежується як реальною шириною зовнішньої стінки, так і доступним проміжком до сусідньої стінки, тому значення понад 100% або еквівалентна абсолютна відстань не дають додаткового ефекту. Задайте 0, щоб вимкнути зміщення."
+
 msgid "Wipe before external loop"
 msgstr "Протирати перед зовнішнім контуром"
 
@@ -17188,8 +17379,9 @@ msgstr "Бере новий інструмент, не чекаючи, доки
 msgid "No sparse layers (beta)"
 msgstr "Без розріджених шарів (бета)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Якщо увімкнено, вежа витирання не друкується на шарах без змін інструментів. На шарах із зміною інструменту екструдер рухатиметься вниз, щоб надрукувати вежу витирання. Користувач несе відповідальність за те, щоб не було зіткнення з друком."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Якщо увімкнено, вежу протирання не буде надруковано на шарах без змін інструменту. На шарах зі зміною інструменту екструдер опуститься вниз, щоб надрукувати вежу протирання, тож вежа опиняється нижче моделі, і головці доводиться тягнутися до неї вниз. Компонування, за яких це призвело б до зіткнення з уже надрукованим обʼєктом, відхиляються. Не діє за плавного таймлапсу чи виявлення налипань на соплі, яким потрібна вежа на кожному шарі."
 
 msgid "Prime all printing extruders"
 msgstr "Підготовка всіх друкуючих екструдерів"
@@ -17214,6 +17406,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Циклічно"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Циклічний порядок"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Власна послідовність філаментів, яку використовує циклічний порядок змін інструменту, у вигляді номерів філаментів через кому (напр. «3,2,1,4»).\n"
+"Кожен шар друкує свої філаменти за цією послідовністю; філаменти, яких немає в переліку, друкуються останніми, за зростанням.\n"
+"Залиште порожнім, щоб перебирати філаменти за зростанням."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Застосовувати циклічний порядок до першого шару"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Застосовує циклічний порядок змін інструменту також і до першого шару.\n"
+"Типово це вимкнено, оскільки перший шар натомість упорядковується для найкращого прилипання до столу: філаменти, якими друкуються дрібні крихкі елементи першого шару, друкуються останніми, тож наступні зміни інструменту та переміщення рідше зривають ці слабко закріплені частини. Цей порядок першого шару враховує також власну послідовність філаментів для першого шару, якщо її задано. Перевага циклічного порядку (додаткові зміни інструменту дають кожному шару більше часу на охолодження) до першого шару не стосується, бо він друкується повільно й гарячим задля прилипання.\n"
+"Вмикайте це, лише якщо вам потрібна точно та сама послідовність інструментів на кожному шарі, зокрема на першому, ціною цієї оптимізації прилипання."
+
 msgid "Slice gap closing radius"
 msgstr "Радіус закриття пробілів під час нарізування"
 
@@ -17223,9 +17443,6 @@ msgstr "Під час розрізання тріщини на трикутну
 msgid "Slicing Mode"
 msgstr "Режим нарізки"
 
-msgid "Other"
-msgstr "Інший"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Використовуйте «парний-непарний» для моделей літаків 3DLabPrint. Використовуйте «Закрити отвори», щоб закрити всі отвори в моделі."
 
@@ -18261,6 +18478,14 @@ msgstr "Без перевірки"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Не виконувати жодних перевірок дійсності, наприклад перевірку конфліктів шляхів G-коду."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Суворий режим"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Завершує роботу з ненульовим кодом, коли нарізка видає некритичне попередження, яке інакше лише записується в журнал, наприклад модель, що потребує підтримок, коли підтримки вимкнено. Використовуйте це в CI або скриптових конвеєрах, які ніколи не мають видавати непомітно зіпсовану нарізку. Кожне таке попередження також наводиться зі сталим класом у масиві `warnings` файлу result.json, який створюється лише в Linux. Не можна поєднувати з --no-check, який пропускає перевірку підтримок."
+
 msgid "Normative check"
 msgstr "Нормативна перевірка"
 
@@ -18273,11 +18498,28 @@ msgstr "Вихідна інформація про модель"
 msgid "This outputs the model’s information."
 msgstr "Виведіть інформацію про модель."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Перевірити сітку (JSON у stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "Виводить у stdout зведення JSON щодо кожного завантаженого обʼєкта й завершує роботу: його обмежувальні паралелепіпеди та грані опуклої оболонки, на які його можна покласти, з їхніми нормалями, площами й центрами. Саме з цих граней вибирають параметри --ground-*. Машиночитна альтернатива --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Перевірити малювання (JSON у stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "Виводить структуроване зведення JSON щодо кожного намальованого шару (підтримки, шов, колір MMU, шорстка поверхня), уже збереженого в завантаженій моделі, — кількість граней, площу поверхні та обмежувальний паралелепіпед у координатах сітки для кожного стану — і завершує роботу. Машиночитна альтернатива відкриттю інструментів малювання в інтерфейсі."
+
 msgid "Export Settings"
 msgstr "Експортувати налаштування"
 
-msgid "This exports settings to a file."
-msgstr "Експортувати налаштування у файл."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Це експортує налаштування у файл. Використовуйте -, щоб записати їх у stdout."
 
 msgid "Send progress to pipe"
 msgstr "Надіслати прогрес до каналу"
@@ -18333,6 +18575,30 @@ msgstr "Обертати навколо осі Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Кут обертання навколо осі Y у градусах."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Покласти на найбільшу грань"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладе кожен обʼєкт на найбільшу грань його опуклої оболонки й опускає його на стіл. З однакових за площею граней зберігається та, що вже обернена донизу. Обʼєкти без достатньо великої грані для опори лишаються без змін. Перетворення виконуються в порядку командного рядка, тож повороти, задані до цього параметра, враховуються. --orient 1 виконується після всіх перетворень і замінює орієнтацію."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Покласти на грань за нормаллю"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладе кожен обʼєкт на ту грань опуклої оболонки, зовнішня нормаль якої найближча до напрямку NX,NY,NZ, і опускає його на стіл. Напрямок задається в координатах обʼєкта, які включають повороти, задані до цього параметра, і збігаються з осями столу, якщо вхідний файл не повертає обʼєкт. Наприклад, 1,0,0 ставить обʼєкт на його бік +X. --orient 1 виконується після всіх перетворень і замінює орієнтацію."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Покласти на грань у точці"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Кладе кожен обʼєкт на ту грань опуклої оболонки, що містить точку X,Y,Z, і опускає його на стіл. Точка задається в координатах обʼєкта, які включають повороти, задані до цього параметра; --inspect-mesh подає центри граней саме в них. Обʼєкти без такої грані лишаються без змін, а запуск завершується помилкою, якщо такої грані немає в жодного обʼєкта. --orient 1 виконується після всіх перетворень і замінює орієнтацію."
+
 msgid "Scale the model by a float factor."
 msgstr "Масштабуйте модель за допомогою плаваючого коефіцієнта"
 
@@ -21495,6 +21761,18 @@ msgstr "Дію не можливо завершити. Продовжити?"
 msgid "Skipping objects."
 msgstr "Пропускання обʼєктів."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Частка матеріалу"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Висота моделі"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Частка"
+
 msgid "Select Filament"
 msgstr "Вибрати філамент"
 
@@ -21758,12 +22036,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Сушіння — осушення"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " максимальна температура сушіння — "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Максимальна температура сушіння для %s — %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " мінімальна температура сушіння — "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Мінімальна температура сушіння для %s — %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22213,6 +22493,95 @@ msgstr ""
 "Уникнення деформації\n"
 "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як ABS, відповідне підвищення температури столу може зменшити ймовірність деформації?"
 
+#~ msgid "Other"
+#~ msgstr "Інший"
+
+#~ msgid "Left: "
+#~ msgstr "Лівий: "
+
+#~ msgid "Right: "
+#~ msgstr "Правий: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Максимальна температура не повинна перевищувати "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Мінімальна температура не повинна бути нижчою ніж "
+
+#~ msgid "up to"
+#~ msgstr "аж до"
+
+#~ msgid "above"
+#~ msgstr "вище"
+
+#~ msgid "from"
+#~ msgstr "від"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Пакет конфігурації: "
+
+#~ msgid " updated to "
+#~ msgstr " оновлено до "
+
+#~ msgid "Grouping error: "
+#~ msgstr "Помилка групування: "
+
+#~ msgid " can not be placed in the "
+#~ msgstr " не можливо помістити у "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " максимальна температура сушіння — "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " мінімальна температура сушіння — "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "потребує"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "не увімкнено"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "матеріал не опубліковано"
+
+#~ msgid "Select the language"
+#~ msgstr "Вибрати мову"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Вибрати плагін"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Напрямок, у якому заповнюються верхні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n"
+#~ "Назовні починає з центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Усередину починає з краю та завершується щільними кривими в центрі.\n"
+#~ "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Напрямок, у якому заповнюються нижні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n"
+#~ "Усередину починає кожну поверхню з ширших зовнішніх кривих, що покращує зчеплення першого шару на столах, де щільні криві в центрі можуть не прилипати. Назовні починає з центру, виштовхуючи надлишок матеріалу до краю.\n"
+#~ "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Якщо увімкнено, вежа витирання не друкується на шарах без змін інструментів. На шарах із зміною інструменту екструдер рухатиметься вниз, щоб надрукувати вежу витирання. Користувач несе відповідальність за те, щоб не було зіткнення з друком."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Експортувати налаштування у файл."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Нативний перегляд у Wayland потребує відеоприймача GStreamer GTK. Встановіть плагін gtksink для GStreamer, а потім перезапустіть OrcaSlicer."
diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po
index 8ec3447568..65ad344552 100644
--- a/localization/i18n/vi/OrcaSlicer_vi.po
+++ b/localization/i18n/vi/OrcaSlicer_vi.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -2568,15 +2568,6 @@ msgstr "Có bản cập nhật khả dụng. Hãy mở hộp thoại gói cài 
 msgid "%s has been removed."
 msgstr "%s đã bị xóa."
 
-msgid "Switching application language"
-msgstr "Đang chuyển ngôn ngữ ứng dụng"
-
-msgid "Select the language"
-msgstr "Chọn ngôn ngữ"
-
-msgid "Language"
-msgstr "Ngôn ngữ"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3880,12 +3871,14 @@ msgid "Switch track at Filament Track Switch"
 msgstr "Chuyển đường dẫn tại Filament Track Switch"
 
 # AI Translated
-msgid "The maximum temperature cannot exceed "
-msgstr "Nhiệt độ tối đa không được vượt quá "
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "Nhiệt độ tối đa không được vượt quá %d"
 
 # AI Translated
-msgid "The minmum temperature should not be less than "
-msgstr "Nhiệt độ tối thiểu không được thấp hơn "
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "Nhiệt độ tối thiểu không được thấp hơn %d"
 
 # AI Translated
 msgid "Type to filter..."
@@ -4836,6 +4829,15 @@ msgstr ""
 "Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể thẻ SD bị khóa ghi?\n"
 "Thông báo lỗi: %1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"Sao chép G-code tạm sang G-code đầu ra thất bại.\n"
+"Thông báo lỗi: %1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể có vấn đề với thiết bị đích, vui lòng thử xuất lại hoặc dùng thiết bị khác. G-code đầu ra bị hỏng ở %1%.tmp."
@@ -5143,6 +5145,10 @@ msgstr ""
 "Yes - Thay đổi các cài đặt này và bật chế độ spiral tự động\n"
 "No  - Từ bỏ dùng chế độ spiral lần này"
 
+# AI Translated
+msgid "N/A"
+msgstr "N/A"
+
 msgid "Printing"
 msgstr "Đang in"
 
@@ -5632,14 +5638,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "Giá trị %s nằm ngoài phạm vi. Phạm vi hợp lệ từ %d đến %d."
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"Là %s%% hay %s %s?\n"
-"YES cho %s%%, \n"
-"NO cho %s %s."
+msgid "Is it %s%% or %s %s?"
+msgstr "Là %s%% hay %s %s?"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5661,30 +5664,22 @@ msgstr "Mẫu không hợp lệ. Dùng N, N#K, hoặc danh sách phân cách d
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "Định dạng không hợp lệ. Mong đợi định dạng vector: \"%1%\""
 
-# AI Translated
-msgid "N/A"
-msgstr "N/A"
-
 # AI Translated
 msgid "System agents"
 msgstr "Tác nhân hệ thống"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "Chưa chọn plugin"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "Thêm plugin"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "Chọn plugin"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "Xóa plugin"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "Chưa chọn plugin"
+
 # AI Translated
 msgid "Configure"
 msgstr "Cấu hình"
@@ -5966,14 +5961,20 @@ msgstr "Đặt về mức tối ưu"
 msgid "Regroup filament"
 msgstr "Nhóm lại filament"
 
-msgid "up to"
-msgstr "lên đến"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "lên đến %1% mm"
 
-msgid "above"
-msgstr "trên"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "trên %1% mm"
 
-msgid "from"
-msgstr "từ"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "từ %1% đến %2% mm"
 
 msgid "Usage"
 msgstr "Sử dụng"
@@ -6357,7 +6358,7 @@ msgstr "Thể tích:"
 msgid "Size:"
 msgstr "Kích thước:"
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Đã tìm thấy xung đột đường đi G-code tại lớp %d, Z = %.2lfmm. Vui lòng tách các vật thể xung đột ra xa hơn (%s <-> %s)."
 
@@ -6689,6 +6690,14 @@ msgstr "Lưu dự án thành"
 msgid "Save current project as"
 msgstr "Lưu dự án hiện tại thành"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "Xuất bản 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "Xuất một tệp 3MF có nhúng các cài đặt đã chọn"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "Nhập 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -8016,6 +8025,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Dưới"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "Cài đặt này không chỉ định loại năng lực plugin."
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "Cài đặt này chỉ định một loại năng lực plugin không nhận dạng được: "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "Chọn plugin"
@@ -8629,6 +8646,14 @@ msgstr "Vui lòng xác nhận G-code trong các preset này an toàn để ngăn
 msgid "Customized Preset"
 msgstr "Preset tùy chỉnh"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "Không thể áp dụng một số cài đặt đã xuất bản:"
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "Một số khe filament đã bị thay đổi:"
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "Tên của các thành phần bên trong file STEP không phải định dạng UTF-8!"
 
@@ -9056,6 +9081,21 @@ msgstr "Lưu file đã slice dưới dạng:"
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "File %s đã được gửi đến không gian lưu trữ của máy in và có thể được xem trên máy in."
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "Xuất bản tệp 3MF thành:"
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"Xuất tệp 3MF đã xuất bản thất bại.\n"
+"Vui lòng kiểm tra xem thư mục có tồn tại trực tuyến không, hoặc có chương trình khác đang mở tệp này không."
+
+msgid "Publish"
+msgstr "Xuất bản"
+
 # AI Translated
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "Chưa đặt loại đầu phun. Vui lòng đặt đầu phun rồi thử lại."
@@ -9286,9 +9326,6 @@ msgstr "Bạn có muốn tiếp tục?"
 msgid "Language selection"
 msgstr "Chọn ngôn ngữ"
 
-msgid "Switching application language while some presets are modified."
-msgstr "Đang chuyển đổi ngôn ngữ ứng dụng trong khi một số preset đã được chỉnh sửa."
-
 msgid "Asia-Pacific"
 msgstr "Châu Á-Thái Bình Dương"
 
@@ -9404,6 +9441,9 @@ msgstr "Đường dẫn phiên bản hiện tại: "
 msgid "General"
 msgstr "Chung"
 
+msgid "Language"
+msgstr "Ngôn ngữ"
+
 msgid "Metric"
 msgstr "Hệ mét"
 
@@ -9903,9 +9943,6 @@ msgstr "Khi kéo thanh trượt lớp trong bản xem trước đã slice, kết
 msgid "Dimmed layer brightness"
 msgstr "Độ sáng của lớp bị làm mờ"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -10326,9 +10363,6 @@ msgstr "Chuyển đến trang web xuất bản model"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "Lưu ý: Chuẩn bị có thể mất vài phút. Vui lòng kiên nhẫn."
 
-msgid "Publish"
-msgstr "Xuất bản"
-
 msgid "Publish was canceled"
 msgstr "Xuất bản đã bị hủy"
 
@@ -10345,6 +10379,81 @@ msgstr "Đang tải dữ liệu lên"
 msgid "Jump to webpage"
 msgstr "Chuyển đến trang web"
 
+# AI Translated
+msgid "Material"
+msgstr "Vật liệu"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "Filament pha trộn"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "Một số filament pha trộn phụ thuộc vào các filament sẽ không được xuất bản:"
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "Filament %d (pha trộn)"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% cần %2%, nhưng filament này chưa được bật."
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% cần %2%, nhưng vật liệu của nó sẽ không được xuất bản."
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "Để xuất bản một filament pha trộn, hãy bật mọi filament mà nó sử dụng rồi chọn Xuất bản đầy đủ, hoặc đáp ứng yêu cầu Loại của nó."
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "Vẫn xuất bản"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "Xuất bản 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "Chọn những cài đặt sẽ được xuất bản trong tệp 3MF"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "Wiki về Xuất bản 3MF"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "Hướng dẫn video về Xuất bản 3MF"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "Filament pha trộn - được xuất bản trọn bộ khi chọn \"Bật\" ở trên"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "Xuất bản filament pha trộn này và bật + xuất bản đầy đủ các filament thành phần của nó"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "Xuất bản khe filament này trong tệp 3MF"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "Xuất bản đầy đủ"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "Nhúng toàn bộ filament của khe này vào tệp 3MF"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "Lọc mục chưa chọn"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "Lưu %s dưới dạng"
@@ -10363,6 +10472,10 @@ msgstr "Sao chép tất cả các giá trị kế thừa từ preset cha vào pr
 msgid "Detach from parent"
 msgstr "Tách khỏi vật thể cha"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "Lưu không kèm vật thể cha"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "Preset độc lập"
@@ -11125,9 +11238,17 @@ msgstr "Prime tower là bắt buộc để phát hiện vón cục. Nếu không
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "Bật cả chiều cao Z chính xác và tháp mồi có thể gây ra lỗi cắt lớp. Bạn vẫn muốn bật chiều cao Z chính xác?"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "Timelapse mượt cần prime tower ở mọi lớp, điều này không tương thích với \"Không có lớp thưa\". \"Không có lớp thưa\" đã được tắt."
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "Cần có prime tower để timelapse mượt. Có thể có khuyết điểm trên model nếu không có prime tower. Bạn có muốn bật prime tower?"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "\"Không có lớp thưa\" không tương thích với timelapse mượt, vốn cần prime tower ở mọi lớp. Timelapse đã chuyển sang chế độ truyền thống."
+
 msgid "Still print by object?"
 msgstr "Vẫn in theo đối tượng?"
 
@@ -11501,10 +11622,6 @@ msgstr "Hồ sơ quy trình tương thích"
 msgid "Printable space"
 msgstr "Không gian in"
 
-# AI Translated
-msgid "Printer Agent"
-msgstr "Tác nhân máy in"
-
 # AI Translated
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "Chọn cách triển khai tác nhân mạng cho việc giao tiếp với máy in. Các tác nhân khả dụng được đăng ký khi khởi động."
@@ -11928,14 +12045,6 @@ msgstr "Số lượng đầu đùn"
 msgid "Capabilities"
 msgstr "Khả năng"
 
-# AI Translated
-msgid "Left: "
-msgstr "Trái: "
-
-# AI Translated
-msgid "Right: "
-msgstr "Phải: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "Hiển thị tất cả preset (bao gồm cả không tương thích)"
 
@@ -12851,15 +12960,22 @@ msgstr "Sửa chữa đã hủy"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "Sao chép file %1% sang %2% thất bại: %3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "Đang tải xuống hồ sơ nhà cung cấp mới: "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "Gói cấu hình: %1% đã cập nhật lên %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "Tải xuống hồ sơ nhà cung cấp thất bại: "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "Cần kiểm tra các thay đổi chưa lưu trước khi cập nhật cấu hình."
 
-msgid "Configuration package: "
-msgstr "Gói cấu hình: "
-
-msgid " updated to "
-msgstr " đã cập nhật lên "
-
 msgid "Open G-code file:"
 msgstr "Mở file G-code:"
 
@@ -12926,12 +13042,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "Input shaping chỉ được Klipper, RepRapFirmware và Marlin 2 hỗ trợ."
 
 # AI Translated
-msgid "Grouping error: "
-msgstr "Lỗi nhóm: "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "Lỗi nhóm: %1% không thể đặt vào đầu phun trái"
 
 # AI Translated
-msgid " can not be placed in the "
-msgstr " không thể được đặt vào "
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "Lỗi nhóm: %1% không thể đặt vào đầu phun phải"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -13046,6 +13164,10 @@ msgstr "%1% quá gần các đối tượng khác, và có thể gây va chạm.
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% quá cao, và sẽ gây va chạm."
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "Vị trí tương đối giữa mô hình và prime tower không đáp ứng yêu cầu của tính năng \"Không có lớp thưa\". Vui lòng điều chỉnh vị trí tương đối của chúng, hạ chiều cao mô hình, hoặc tắt \"Không có lớp thưa\"."
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr " quá gần vùng loại trừ, có thể có va chạm khi in."
 
@@ -13420,6 +13542,10 @@ msgstr "Dùng 3MF thay cho G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "Bật tùy chọn này nếu máy in nhận file 3MF làm tác vụ in. Khi bật, Orca Slicer sẽ gửi file đã slice dưới dạng .gcode.3mf thay vì file .gcode thuần."
 
+# AI Translated
+msgid "Printer Agent"
+msgstr "Tác nhân máy in"
+
 # AI Translated
 msgid "Select the network agent implementation for printer communication."
 msgstr "Chọn cách triển khai tác nhân mạng cho việc giao tiếp với máy in."
@@ -14511,6 +14637,10 @@ msgstr "Thẳng hàng căn chỉnh"
 msgid "Concentric"
 msgstr "Đồng tâm"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "Xoắn ốc thụt vào"
+
 msgid "Hilbert Curve"
 msgstr "Đường cong Hilbert"
 
@@ -14602,13 +14732,13 @@ msgstr "Thứ tự lấp bề mặt trên"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Hướng lấp các bề mặt trên khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n"
-"Ra ngoài bắt đầu từ tâm bề mặt, nhờ đó vật liệu dư bị đẩy về phía mép nơi ít nhìn thấy nhất. Vào trong bắt đầu từ mép và kết thúc bằng các đường cong hẹp ở tâm.\n"
-"Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ."
+"Hướng lấp đầy các bề mặt trên khi dùng mẫu xuất phát từ tâm (Đồng tâm, Xoắn ốc thụt vào, Dây cung Archimedes, Xoắn ốc bát giác).\n"
+"Ra ngoài bắt đầu từ tâm bề mặt, nên vật liệu dư bị đẩy về phía mép, nơi ít lộ nhất. Vào trong bắt đầu từ mép và kết thúc bằng những đường cong hẹp ở tâm.\n"
+"Mặc định dùng thứ tự theo đường đi ngắn nhất, có thể chạy theo hướng nào cũng được."
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -14616,13 +14746,13 @@ msgstr "Thứ tự lấp bề mặt dưới"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Hướng lấp các bề mặt dưới khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n"
-"Vào trong bắt đầu mỗi bề mặt bằng các đường cong ngoài rộng hơn, giúp cải thiện độ bám lớp đầu tiên trên những bàn in mà các đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n"
-"Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ."
+"Hướng lấp đầy các bề mặt dưới khi dùng mẫu xuất phát từ tâm (Đồng tâm, Xoắn ốc thụt vào, Dây cung Archimedes, Xoắn ốc bát giác).\n"
+"Vào trong bắt đầu mỗi bề mặt bằng những đường cong ngoài rộng hơn, giúp lớp đầu tiên bám tốt hơn trên các bàn in mà những đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n"
+"Mặc định dùng thứ tự theo đường đi ngắn nhất, có thể chạy theo hướng nào cũng được."
 
 msgid "Internal solid infill pattern"
 msgstr "Mẫu infill đặc bên trong"
@@ -14726,6 +14856,14 @@ msgstr "Ngược chiều kim đồng hồ"
 msgid "Clockwise"
 msgstr "Cùng chiều kim đồng hồ"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "Khoảng cách tới thanh"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "Khoảng cách ngang từ mũi đầu phun tới mép xa hơn của thanh. Dùng để tránh va chạm khi in theo đối tượng."
+
 msgid "Height to rod"
 msgstr "Chiều cao đến thanh"
 
@@ -17000,6 +17138,20 @@ msgstr "Phát hiện thành nhô"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "Phát hiện phần trăm nhô tương đối với độ rộng đường và sử dụng tốc độ khác nhau để in. Đối với phần nhô 100%%, tốc độ cầu được sử dụng."
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "In các thành không được đỡ sau cùng"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"Các vòng wall nằm hoàn toàn lơ lửng trên không chỉ được in khi đã có thứ gì đó giữ được chúng:\n"
+"chúng được đùn sau các thành khác trong cùng đảo, bắt đầu từ vòng trong cùng, bất kể thứ tự thành là gì.\n"
+"Một vòng mà chỉ các cầu của lớp này mới neo được sẽ đợi cho tới khi các cầu đó được in, trong khi một vòng chạy dọc theo một thành có điểm tựa vẫn giữ vị trí của nó trước infill, vốn cần nó làm điểm neo."
+
 # AI Translated
 msgid "Outer walls"
 msgstr "Thành ngoài"
@@ -17449,6 +17601,39 @@ msgstr "Lau trên vòng"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "Để giảm thiểu khả năng nhìn thấy đường nối trong đùn vòng kín, một chuyển động vào trong nhỏ được thực hiện trước khi extruder rời khỏi vòng."
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "Lau vào trong"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"Chỉ áp dụng cho các thành ngoài, kể cả biên của lỗ. Trong lúc lau, đầu phun nóng được đưa về phía các thành trong đã in để giảm việc nung lại phần nhựa vừa in và giảm vết đường nối.\n"
+"\n"
+"Đặc biệt hữu ích ở chiều cao lớp dưới 0,1 mm, nơi vết lau dễ thấy hơn.\n"
+"\n"
+"Dùng cách lau thông thường nếu chưa có thành trong liền kề nào được in (vùng chỉ có một thành hoặc thứ tự thành Ngoài/Trong), hoặc nếu không tìm được đường đi vào trong có điểm tựa, ví dụ ở các góc hẹp hay khe hở đường nối."
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "Khoảng cách lau vào trong"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"Khoảng cách mà đường lau được dịch ra xa khỏi chu vi ngoài, tính bằng milimét hoặc theo phần trăm độ rộng đùn thực tế của thành ngoài.\n"
+"\n"
+"Ví dụ, 50% dịch đường đi một nửa độ rộng thành ngoài. Độ dịch thực tế bị giới hạn bởi cả độ rộng thật của thành ngoài lẫn khoảng trống còn lại tới thành liền kề, nên các giá trị trên 100% hoặc khoảng cách tuyệt đối tương đương sẽ không có thêm tác dụng. Đặt 0 để tắt việc dịch chuyển."
+
 msgid "Wipe before external loop"
 msgstr "Lau trước vòng ngoài"
 
@@ -17718,8 +17903,9 @@ msgstr "Lấy công cụ mới mà không chờ nó đạt nhiệt độ in, di
 msgid "No sparse layers (beta)"
 msgstr "Không có lớp thưa (beta)"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "Nếu được bật, wipe tower sẽ không được in trên các lớp không có thay đổi công cụ. Trên các lớp có thay đổi công cụ, extruder sẽ di chuyển xuống để in wipe tower. Người dùng chịu trách nhiệm đảm bảo không có va chạm với bản in."
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "Nếu bật, wipe tower sẽ không được in ở những lớp không có đổi công cụ. Ở những lớp có đổi công cụ, extruder sẽ đi xuống để in wipe tower, nên tháp nằm thấp hơn mô hình và đầu công cụ phải với xuống tới đó. Những bố trí khiến điều này va chạm với một vật thể đã in sẽ bị từ chối. Không có tác dụng với timelapse mượt hoặc phát hiện đóng cục ở đầu phun, vì chúng cần có tháp ở mọi lớp."
 
 msgid "Prime all printing extruders"
 msgstr "Nạp tất cả extruder in"
@@ -17745,6 +17931,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "Tuần hoàn"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "Thứ tự vòng lặp"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"Trình tự filament tùy chỉnh mà thứ tự đổi công cụ theo vòng lặp sử dụng, viết dưới dạng các số filament ngăn cách bằng dấu phẩy (ví dụ \"3,2,1,4\").\n"
+"Mỗi lớp in các filament của nó theo trình tự này; các filament không được liệt kê sẽ in sau cùng, theo thứ tự tăng dần.\n"
+"Để trống để luân phiên các filament theo thứ tự tăng dần."
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "Áp dụng thứ tự vòng lặp cho lớp đầu tiên"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"Áp dụng thứ tự đổi công cụ theo vòng lặp cho cả lớp đầu tiên.\n"
+"Mặc định tùy chọn này tắt, vì lớp đầu tiên được sắp xếp theo hướng bám dính đế tốt nhất: những filament in các chi tiết nhỏ, mỏng manh của lớp đầu tiên sẽ được in sau cùng, nhờ đó các lần đổi công cụ và di chuyển tiếp theo ít có khả năng làm bong những phần bám yếu đó. Thứ tự lớp đầu tiên này cũng tôn trọng trình tự filament tùy chỉnh cho lớp đầu tiên nếu có thiết lập. Lợi ích của thứ tự vòng lặp (thêm lần đổi công cụ giúp mỗi lớp có nhiều thời gian nguội hơn) không áp dụng cho lớp đầu tiên, vốn được in chậm và nóng để bám dính.\n"
+"Chỉ bật tùy chọn này nếu bạn cần đúng cùng một trình tự công cụ ở mọi lớp, kể cả lớp đầu, đánh đổi bằng việc mất tối ưu bám dính nói trên."
+
 msgid "Slice gap closing radius"
 msgstr "Bán kính đóng khe slice"
 
@@ -17754,9 +17968,6 @@ msgstr "Vết nứt nhỏ hơn 2x bán kính đóng khe được lấp trong sli
 msgid "Slicing Mode"
 msgstr "Chế độ slice"
 
-msgid "Other"
-msgstr "Khác"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "Sử dụng \"Chẵn-lẻ\" cho model máy bay 3DLabPrint. Sử dụng \"Đóng lỗ\" để đóng tất cả các lỗ trong model."
 
@@ -18789,6 +19000,14 @@ msgstr "Không kiểm tra"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "Không chạy bất kỳ kiểm tra tính hợp lệ nào, chẳng hạn như kiểm tra xung đột đường dẫn G-code."
 
+# AI Translated
+msgid "Strict mode"
+msgstr "Chế độ nghiêm ngặt"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "Thoát với mã khác 0 khi việc slice phát sinh một cảnh báo không nghiêm trọng mà bình thường chỉ được ghi log, chẳng hạn mô hình cần support trong khi support đang tắt. Hãy dùng trong CI hoặc các quy trình chạy bằng script vốn không bao giờ được xuất ra kết quả slice hỏng một cách khó nhận ra. Mỗi cảnh báo như vậy cũng được liệt kê kèm một lớp ổn định trong mảng `warnings` của result.json, tệp chỉ được ghi trên Linux. Không thể kết hợp với --no-check, tùy chọn bỏ qua việc kiểm tra support."
+
 msgid "Normative check"
 msgstr "Kiểm tra quy chuẩn"
 
@@ -18801,11 +19020,28 @@ msgstr "Xuất thông tin model"
 msgid "This outputs the model’s information."
 msgstr "Xuất thông tin của model."
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "Kiểm tra lưới (JSON ra stdout)"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "In ra stdout bản tóm tắt JSON của từng vật thể đã nạp rồi thoát: các hộp bao của nó và các mặt bao lồi mà nó có thể nằm lên, kèm pháp tuyến, diện tích và tâm của chúng. Đây chính là những mặt mà các tùy chọn --ground-* lựa chọn. Lựa chọn thay thế đọc được bằng máy cho --info."
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "Kiểm tra phần vẽ (JSON ra stdout)"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "In bản tóm tắt JSON có cấu trúc của mọi lớp đã vẽ (support, đường nối, màu MMU, fuzzy skin) đang được lưu trên mô hình đã nạp — số mặt, diện tích bề mặt và hộp bao theo tọa độ lưới cho từng trạng thái — rồi thoát. Lựa chọn thay thế đọc được bằng máy cho việc mở các gizmo vẽ trong giao diện."
+
 msgid "Export Settings"
 msgstr "Xuất cài đặt"
 
-msgid "This exports settings to a file."
-msgstr "Xuất cài đặt vào file."
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "Lệnh này xuất cài đặt ra một tệp. Dùng - để ghi chúng ra stdout."
 
 msgid "Send progress to pipe"
 msgstr "Gửi tiến trình đến pipe"
@@ -18861,6 +19097,30 @@ msgstr "Xoay xung quanh Y"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "Góc xoay xung quanh trục Y tính bằng độ."
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "Đặt lên mặt lớn nhất"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Đặt mỗi vật thể lên mặt lớn nhất của bao lồi rồi thả xuống bàn in. Trong số các mặt lớn bằng nhau, mặt đang hướng xuống sẽ được giữ lại. Những vật thể không có mặt đủ lớn để nằm lên sẽ được giữ nguyên. Các phép biến đổi chạy theo thứ tự trên dòng lệnh, nên các phép xoay đặt trước tùy chọn này vẫn được tôn trọng. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt."
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "Đặt lên mặt theo pháp tuyến"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Đặt mỗi vật thể lên mặt của bao lồi có pháp tuyến hướng ra ngoài gần nhất với hướng NX,NY,NZ rồi thả xuống bàn in. Hướng này tính theo tọa độ vật thể, vốn đã bao gồm các phép xoay đặt trước tùy chọn này và trùng với các trục của bàn in trừ khi tệp đầu vào có xoay vật thể. Ví dụ, 1,0,0 dựng vật thể lên mặt +X của nó. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt."
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "Đặt lên mặt tại điểm"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "Đặt mỗi vật thể lên mặt của bao lồi có chứa điểm X,Y,Z rồi thả xuống bàn in. Điểm này tính theo tọa độ vật thể, vốn đã bao gồm các phép xoay đặt trước tùy chọn này; --inspect-mesh báo tâm các mặt theo đúng hệ tọa độ đó. Những vật thể không có mặt như vậy sẽ được giữ nguyên, và lần chạy sẽ thất bại nếu không vật thể nào có mặt đó. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt."
+
 msgid "Scale the model by a float factor."
 msgstr "Tỷ lệ model theo hệ số số thực."
 
@@ -22165,6 +22425,18 @@ msgstr "Thao tác này không thể hoàn tác. Tiếp tục?"
 msgid "Skipping objects."
 msgstr "Đang bỏ qua các vật thể."
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "Tỉ lệ vật liệu"
+
+# AI Translated
+msgid "Model Height"
+msgstr "Chiều cao mô hình"
+
+# AI Translated
+msgid "Ratio"
+msgstr "Tỉ lệ"
+
 # AI Translated
 msgid "Select Filament"
 msgstr "Chọn filament"
@@ -22480,12 +22752,14 @@ msgid "Drying-Dehumidifying"
 msgstr "Sấy - Hút ẩm"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " nhiệt độ sấy tối đa là "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "Nhiệt độ sấy tối đa của %s là %d°C."
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " nhiệt độ sấy tối thiểu là "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "Nhiệt độ sấy tối thiểu của %s là %d°C."
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -22936,6 +23210,101 @@ msgstr ""
 "Tránh cong vênh\n"
 "Bạn có biết rằng khi in vật liệu dễ cong vênh như ABS, tăng nhiệt độ bàn nóng một cách thích hợp có thể giảm xác suất cong vênh không?"
 
+#~ msgid "Other"
+#~ msgstr "Khác"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "Trái: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "Phải: "
+
+# AI Translated
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "Nhiệt độ tối đa không được vượt quá "
+
+# AI Translated
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "Nhiệt độ tối thiểu không được thấp hơn "
+
+#~ msgid "up to"
+#~ msgstr "lên đến"
+
+#~ msgid "above"
+#~ msgstr "trên"
+
+#~ msgid "from"
+#~ msgstr "từ"
+
+#~ msgid "Configuration package: "
+#~ msgstr "Gói cấu hình: "
+
+#~ msgid " updated to "
+#~ msgstr " đã cập nhật lên "
+
+# AI Translated
+#~ msgid "Grouping error: "
+#~ msgstr "Lỗi nhóm: "
+
+# AI Translated
+#~ msgid " can not be placed in the "
+#~ msgstr " không thể được đặt vào "
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " nhiệt độ sấy tối đa là "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " nhiệt độ sấy tối thiểu là "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "cần"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "chưa bật"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "vật liệu chưa xuất bản"
+
+#~ msgid "Select the language"
+#~ msgstr "Chọn ngôn ngữ"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "Chọn plugin"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Hướng lấp các bề mặt trên khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n"
+#~ "Ra ngoài bắt đầu từ tâm bề mặt, nhờ đó vật liệu dư bị đẩy về phía mép nơi ít nhìn thấy nhất. Vào trong bắt đầu từ mép và kết thúc bằng các đường cong hẹp ở tâm.\n"
+#~ "Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ."
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "Hướng lấp các bề mặt dưới khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n"
+#~ "Vào trong bắt đầu mỗi bề mặt bằng các đường cong ngoài rộng hơn, giúp cải thiện độ bám lớp đầu tiên trên những bàn in mà các đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n"
+#~ "Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ."
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "Nếu được bật, wipe tower sẽ không được in trên các lớp không có thay đổi công cụ. Trên các lớp có thay đổi công cụ, extruder sẽ di chuyển xuống để in wipe tower. Người dùng chịu trách nhiệm đảm bảo không có va chạm với bản in."
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "Xuất cài đặt vào file."
+
 # AI Translated
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "Xem trực tiếp trên Wayland thuần cần GStreamer GTK video sink. Vui lòng cài đặt plugin gtksink cho GStreamer, sau đó khởi động lại OrcaSlicer."
diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
index 81cd5a402b..84df96d57c 100644
--- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -2361,15 +2361,6 @@ msgstr "有更新可用。打开预设包对话框进行更新。"
 msgid "%s has been removed."
 msgstr "%s 已被移除。"
 
-msgid "Switching application language"
-msgstr "切换应用程序语言"
-
-msgid "Select the language"
-msgstr "选择语言"
-
-msgid "Language"
-msgstr "语言"
-
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
 msgstr "切换 Orca Slicer 语言到 %s 失败。"
@@ -3574,11 +3565,15 @@ msgstr "退回变轨器的当前耗材"
 msgid "Switch track at Filament Track Switch"
 msgstr "变轨器开关切换"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "最高温度不可超过 "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "最高温度不可超过 %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "最低温度不可低于 "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "最低温度不可低于 %d"
 
 msgid "Type to filter..."
 msgstr "输入以筛选……"
@@ -4439,6 +4434,15 @@ msgstr ""
 "将临时 G-Code 复制到输出 G-Code 失败。也许 SD 卡被写锁定了？\n"
 "错误消息：%1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"将临时 G-code 复制到输出 G-code 失败。\n"
+"错误信息：%1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "将临时 G-Code 复制到输出 G-Code 失败。目标设备可能有问题，请再次尝试导出或使用其他设备。损坏的输出 G-Code 在 %1%.tmp。"
@@ -4743,6 +4747,9 @@ msgstr ""
 "是 - 自动调整这些设置并开启旋转模式\n"
 "否 - 暂不使用旋转模式"
 
+msgid "N/A"
+msgstr "不适用"
+
 msgid "Printing"
 msgstr "打印中"
 
@@ -5173,14 +5180,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "值 %s 超出了范围，有效的范围是从 %d 到 %d 。"
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"%s%%还是%s %s？\n"
-"是：%s%%\n"
-"否：%s %s"
+msgid "Is it %s%% or %s %s?"
+msgstr "%s%%还是%s %s？"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5202,29 +5206,22 @@ msgstr "无效的模式。请使用 N、N#K 或逗号分隔的列表（每个条
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "无效格式，应该是\"%1%\"这种数组格式"
 
-msgid "N/A"
-msgstr "不适用"
-
 # AI Translated
 msgid "System agents"
 msgstr "系统代理"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "未选择插件"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "添加插件"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "选择插件"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "移除插件"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "未选择插件"
+
 # AI Translated
 msgid "Configure"
 msgstr "配置"
@@ -5480,14 +5477,20 @@ msgstr "设置为最佳"
 msgid "Regroup filament"
 msgstr "重新组合耗材丝"
 
-msgid "up to"
-msgstr "达到"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "最高 %1% mm"
 
-msgid "above"
-msgstr "高于"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "高于 %1% mm"
 
-msgid "from"
-msgstr "从"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "从 %1% mm 到 %2% mm"
 
 msgid "Usage"
 msgstr "用法"
@@ -5847,7 +5850,7 @@ msgstr "体积："
 msgid "Size:"
 msgstr "尺寸："
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "发现G-code路径在层%d，高度为%.2lf mm处有冲突。请将有冲突的对象分离得更远(%s <-> %s)。"
 
@@ -6159,6 +6162,14 @@ msgstr "项目另存为"
 msgid "Save current project as"
 msgstr "项目另存为"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "发布 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "导出内嵌所选设置的 3MF 文件"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "导入 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7411,6 +7422,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "底部"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "此设置未指定插件能力类型。"
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "此设置指定了无法识别的插件能力类型： "
+
 msgid "Plugin Selection"
 msgstr "插件选择"
 
@@ -7949,6 +7968,14 @@ msgstr "请确认这些预设中的G-codes是否安全，以防止对机器造
 msgid "Customized Preset"
 msgstr "自定义的预设"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "部分已发布的设置无法应用："
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "部分耗材丝槽位已更改："
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "STEP 文件中的部件名称不是 UTF-8 格式！"
 
@@ -8354,6 +8381,21 @@ msgstr "切片文件另存为："
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "文件%s已经发送到打印机的存储空间，可以在打印机上浏览。"
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "发布 3MF 文件为："
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"导出发布的 3MF 文件失败。\n"
+"请检查该文件夹是否在线可用，或文件是否被其他程序打开。"
+
+msgid "Publish"
+msgstr "发布"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "未设置喷嘴类型。请设置喷嘴并重试。"
 
@@ -8564,9 +8606,6 @@ msgstr "是否继续？"
 msgid "Language selection"
 msgstr "语言选择"
 
-msgid "Switching application language while some presets are modified."
-msgstr "在切换应用语言之前发现某些参数预设有更改。"
-
 msgid "Asia-Pacific"
 msgstr "亚太"
 
@@ -8664,6 +8703,9 @@ msgstr "当前实例路径"
 msgid "General"
 msgstr "常规"
 
+msgid "Language"
+msgstr "语言"
+
 msgid "Metric"
 msgstr "公制（Metric）"
 
@@ -9102,9 +9144,6 @@ msgstr "在切片预览中拖动图层滑块时，将当前图层下方的图层
 msgid "Dimmed layer brightness"
 msgstr "调暗图层的亮度"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9489,9 +9528,6 @@ msgstr "跳转到发布页面"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "提示：发布前需要一些准备时间，请耐心等待。"
 
-msgid "Publish"
-msgstr "发布"
-
 msgid "Publish was canceled"
 msgstr "发布已取消"
 
@@ -9507,6 +9543,81 @@ msgstr "正在上传数据"
 msgid "Jump to webpage"
 msgstr "跳转到网页"
 
+# AI Translated
+msgid "Material"
+msgstr "材料"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "混合耗材丝"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "部分混合耗材丝依赖于不会被发布的耗材丝："
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "耗材丝 %d（混合）"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% 需要 %2%，但它未开启。"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% 需要 %2%，但其材料不会被发布。"
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "要发布混合耗材丝，请开启它所使用的每一种耗材丝，并选择“完整发布”或满足其“类型”要求。"
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "仍然发布"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "发布 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "选择要在 3MF 文件中发布的设置"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "发布 3MF Wiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "发布 3MF 视频指南"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "混合耗材丝 - 在上方选择“开启”后将整体发布"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "发布此混合耗材丝，并开启 + 完整发布其组成耗材丝"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "在 3MF 文件中发布此耗材丝槽位"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "完整发布"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "将此槽位的整条耗材丝内嵌到 3MF 文件中"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "筛选未选项"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "另存%s为"
@@ -9524,6 +9635,10 @@ msgstr "将父预设继承的所有数值复制到当前预设，并解除继承
 msgid "Detach from parent"
 msgstr "与父级分离"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "不保留父级另存"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "独立预设"
@@ -10194,9 +10309,17 @@ msgstr "结块检测需要 Prime 塔。没有主塔的模型可能存在缺陷
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "同时启用精确Z高度和擦拭塔可能会导致切片错误。您仍然要启用精确Z高度吗？"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "平滑模式的延时摄影需要每层都有擦拭塔，因此与“无稀疏层”不兼容。“无稀疏层”已关闭。"
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "“无稀疏层”与平滑模式的延时摄影不兼容，后者需要每层都有擦拭塔。延时摄影已切换为传统模式。"
+
 msgid "Still print by object?"
 msgstr "仍然按对象打印吗？"
 
@@ -10566,9 +10689,6 @@ msgstr "兼容的切片配置"
 msgid "Printable space"
 msgstr "可打印区域"
 
-msgid "Printer Agent"
-msgstr "打印机代理"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "为打印机通信选择网络代理。可用的代理将在启动时列出。"
 
@@ -10970,14 +11090,6 @@ msgstr "挤出机数量"
 msgid "Capabilities"
 msgstr "能力"
 
-# AI Translated
-msgid "Left: "
-msgstr "左: "
-
-# AI Translated
-msgid "Right: "
-msgstr "右: "
-
 msgid "Show all presets (including incompatible)"
 msgstr "显示所有预设(包括不兼容的)"
 
@@ -11822,15 +11934,22 @@ msgstr "修复被取消"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "从%1%拷贝文件到%2%失败：%3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "正在下载新的供应商配置： "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "配置包：%1% 已更新到 %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "下载供应商配置失败： "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "需要在配置更新之前检查没有保存的参数修改。"
 
-msgid "Configuration package: "
-msgstr "配置包："
-
-msgid " updated to "
-msgstr "更新到"
-
 msgid "Open G-code file:"
 msgstr "打开G-code文件："
 
@@ -11890,11 +12009,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "输入整形仅受 Klipper、RepRapFirmware 和 Marlin 2 支持"
 
-msgid "Grouping error: "
-msgstr "分组错误："
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "分组错误：%1% 无法放入左喷嘴"
 
-msgid " can not be placed in the "
-msgstr "不能放置在"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "分组错误：%1% 无法放入右喷嘴"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12008,6 +12131,10 @@ msgstr "%1%离其它对象太近，可能会发生碰撞。"
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1%太高，会发生碰撞。"
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "模型与擦拭塔的相对位置不满足“无稀疏层”功能的要求。请调整两者的相对位置、降低模型高度，或关闭“无稀疏层”。"
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr "离不可打印区域太近，打印时可能会发生碰撞。"
 
@@ -12351,6 +12478,9 @@ msgstr "使用 3MF 代替 G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "如果打印机接受 3MF 文件作为打印任务，请启用此选项。启用后，Orca Slicer 将以 .gcode.3mf 格式发送切片文件，而不是普通的 .gcode 文件。"
 
+msgid "Printer Agent"
+msgstr "打印机代理"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "选择打印机通信的网络代理实施。"
 
@@ -13357,6 +13487,10 @@ msgstr "直线排列"
 msgid "Concentric"
 msgstr "同心"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "螺旋内缩"
+
 msgid "Hilbert Curve"
 msgstr "希尔伯特曲线"
 
@@ -13452,13 +13586,13 @@ msgstr "顶面填充顺序"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充顶面的方向。\n"
-"向外从表面中心开始，因此多余的材料会被推向边缘等最不显眼的位置。向内从边缘开始，并以中心处的紧密曲线结束。\n"
-"默认使用最短路径排序，可能沿任一方向进行。"
+"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，顶面的填充方向。\n"
+"向外从表面中心开始，多余的材料会被推向边缘，在那里最不显眼。向内从边缘开始，以中心处的紧密曲线结束。\n"
+"默认使用最短路径排序，方向可能是两者中的任意一种。"
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13466,13 +13600,13 @@ msgstr "底面填充顺序"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充底面的方向。\n"
-"向内以较宽的外侧曲线开始每个表面，这可以改善在热床上的首层附着，因为中心处的紧密曲线可能无法粘牢。向外从中心开始，将多余的材料推向边缘。\n"
-"默认使用最短路径排序，可能沿任一方向进行。"
+"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，底面的填充方向。\n"
+"向内让每个表面从较宽的外侧曲线开始，可改善首层在热床上的粘接，尤其当中心处的紧密曲线不易粘牢时。向外从中心开始，将多余的材料推向边缘。\n"
+"默认使用最短路径排序，方向可能是两者中的任意一种。"
 
 msgid "Internal solid infill pattern"
 msgstr "内部实心填充图案"
@@ -13575,6 +13709,14 @@ msgstr "逆时针"
 msgid "Clockwise"
 msgstr "顺时针"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "到杆的距离"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "喷嘴尖端到杆较远一侧边缘的水平距离。用于逐件打印时的避障。"
+
 msgid "Height to rod"
 msgstr "到横杆高度"
 
@@ -15739,6 +15881,20 @@ msgstr "识别悬垂外墙"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "检测悬垂相对于线宽的百分比，并应用不同的速度打印。100%%的悬垂将使用桥接速度。"
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "最后打印无支撑的墙"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"完全悬空的墙闭环会等到有东西能够承托它们时才打印：\n"
+"无论墙的顺序如何，它们都在同一岛屿的其他墙之后挤出，从最内侧开始。\n"
+"只能由本层桥接锚定的闭环会等待这些桥接打印完成；而沿着有支撑的墙延伸的闭环则保持在填充之前的位置，因为填充需要它作为锚点。"
+
 msgid "Outer walls"
 msgstr "外墙"
 
@@ -16178,6 +16334,39 @@ msgstr "闭环擦拭"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "为了最大限度地减少闭环挤出中接缝的可见性，在挤出机离开环之前，会向内执行一个小小的移动。"
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "向内擦拭"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"仅适用于外墙，包括孔洞边界。擦拭时将高温喷嘴移向已打印的内墙，以减少刚打印塑料的二次受热和接缝痕迹。\n"
+"\n"
+"在层高低于 0.1 mm 时尤其有用，此时擦拭痕迹更明显。\n"
+"\n"
+"若相邻内墙尚未打印（单墙区域或外墙/内墙顺序），或找不到有支撑的向内路径（例如在锐角或接缝间隙处），则使用常规擦拭。"
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "向内擦拭距离"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"擦拭路径偏离外墙轮廓的距离，以毫米或实际外墙挤出宽度的百分比指定。\n"
+"\n"
+"例如，50% 会将路径偏移外墙宽度的一半。实际偏移量同时受实际外墙宽度和到相邻墙的可用间距限制，因此超过 100% 的值或等效的绝对距离不会产生额外效果。设为 0 可禁用偏移。"
+
 msgid "Wipe before external loop"
 msgstr "额外的外墙打印前擦拭"
 
@@ -16439,8 +16628,9 @@ msgstr "拾取新工具头后不等待其达到打印温度，直接移动到擦
 msgid "No sparse layers (beta)"
 msgstr "无稀疏层 （实验功能）"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "如果启用，将不会在没有换色的层打印擦拭塔。存在换色的层时，挤出机将降低高度打印擦拭塔。用户应该确保不会与打印内容发生冲突。"
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "启用后，擦拭塔不会在没有换料的层上打印。在有换料的层上，挤出机会向下移动去打印擦拭塔，因此塔会低于模型，工具头必须向下伸到它那里。若这样会与已打印的对象发生碰撞，则该布局会被拒绝。对平滑模式的延时摄影或喷嘴结块检测无效，因为它们需要每层都有塔。"
 
 msgid "Prime all printing extruders"
 msgstr "所有挤出机画线"
@@ -16466,6 +16656,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "循环"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "循环顺序"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"循环换料排序所使用的自定义耗材丝序列，以逗号分隔的耗材丝编号表示（例如“3,2,1,4”）。\n"
+"每一层按此序列打印其耗材丝；未列出的耗材丝最后打印，并按升序排列。\n"
+"留空则按升序循环使用各耗材丝。"
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "对首层应用循环顺序"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"将循环换料顺序同样应用于首层。\n"
+"默认关闭，因为首层改为按最佳热床粘接排序：打印首层细小脆弱特征的耗材丝会最后打印，这样后续的换料和空驶就不易将这些附着薄弱的部分蹭掉。若设置了自定义首层耗材丝序列，该首层顺序也会遵循它。循环顺序的好处（额外的换料让每层有更多冷却时间）并不适用于首层，因为首层为了粘接会以慢速高温打印。\n"
+"仅当你需要包括首层在内的每一层都使用完全相同的换料顺序时才启用此项，代价是失去上述粘接优化。"
+
 msgid "Slice gap closing radius"
 msgstr "切片间隙闭合半径"
 
@@ -16475,9 +16693,6 @@ msgstr "在三角形网格切片过程中，小于2倍间隙闭合半径的裂
 msgid "Slicing Mode"
 msgstr "切片模式"
 
-msgid "Other"
-msgstr "其他"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "对3DLabPrint的飞机模型使用 \"奇偶\"。使用 \"闭孔 \"来关闭模型上的所有孔。"
 
@@ -17471,6 +17686,14 @@ msgstr "不进行检查"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "不运行任何有效性检查，例如G-code路径冲突检查。"
 
+# AI Translated
+msgid "Strict mode"
+msgstr "严格模式"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "当切片产生原本仅记入日志的非严重警告时（例如禁用支撑却需要支撑的模型），以非零状态码退出。请在绝不能交付存在隐蔽缺陷切片结果的 CI 或脚本流程中使用。每条此类警告还会以稳定的类别列在 result.json 的 `warnings` 数组中，该文件仅在 Linux 上生成。不能与 --no-check 同时使用，后者会跳过支撑检查。"
+
 msgid "Normative check"
 msgstr "规范性检查"
 
@@ -17483,11 +17706,28 @@ msgstr "输出模型信息"
 msgid "This outputs the model’s information."
 msgstr "输出模型的信息。"
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "检查网格（JSON 输出到 stdout）"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "将每个已加载对象的 JSON 摘要输出到 stdout，然后退出：包括其包围盒，以及可供放置的凸包面及其法线、面积和中心。--ground-* 选项正是从这些面中选择。--info 的机器可读替代方案。"
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "检查绘制（JSON 输出到 stdout）"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "输出已加载模型上已保存的每个绘制图层（支撑、接缝、MMU 颜色、绒毛表面）的结构化 JSON 摘要 — 每种状态的面片数量、表面积和网格局部包围盒 — 然后退出。在图形界面中打开绘制工具的机器可读替代方案。"
+
 msgid "Export Settings"
 msgstr "导出配置"
 
-msgid "This exports settings to a file."
-msgstr "导出配置到文件。"
+# AI Translated
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "将设置导出到文件。使用 - 可将其写入 stdout。"
 
 msgid "Send progress to pipe"
 msgstr "将进度发送到管道"
@@ -17543,6 +17783,30 @@ msgstr "绕 Y 旋转"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "绕 Y 轴的旋转角度（以度为单位）"
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "以最大面着床"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "将每个对象以其凸包的最大面放置，并落到热床上。若有多个同样大的面，则保留已经朝下的那一个。没有足够大可供放置的面的对象保持原样。变换按命令行中的先后顺序执行，因此在此选项之前给出的旋转会被保留。--orient 1 在所有变换之后执行，并会替换朝向。"
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "按法线以指定面着床"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "将每个对象以其凸包中外法线最接近方向 NX,NY,NZ 的面放置，并落到热床上。该方向使用对象坐标系，其中包含在此选项之前给出的旋转；除非输入文件旋转了该对象，否则它与打印板的坐标轴一致。例如，1,0,0 会让对象以 +X 面站立。--orient 1 在所有变换之后执行，并会替换朝向。"
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "以指定点所在面着床"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "将每个对象以其凸包中包含点 X,Y,Z 的面放置，并落到热床上。该点使用对象坐标系，其中包含在此选项之前给出的旋转；--inspect-mesh 报告的面中心也使用该坐标系。没有此类面的对象保持原样；若所有对象都没有此类面，则本次运行失败。--orient 1 在所有变换之后执行，并会替换朝向。"
+
 msgid "Scale the model by a float factor."
 msgstr "根据因数缩放模型"
 
@@ -20639,6 +20903,18 @@ msgstr "此操作无法撤消。继续？"
 msgid "Skipping objects."
 msgstr "跳过对象。"
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "材料比例"
+
+# AI Translated
+msgid "Model Height"
+msgstr "模型高度"
+
+# AI Translated
+msgid "Ratio"
+msgstr "比例"
+
 msgid "Select Filament"
 msgstr "选择耗材"
 
@@ -20895,12 +21171,14 @@ msgid "Drying-Dehumidifying"
 msgstr "干燥-除湿"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " 最高干燥温度为 "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s 的最高干燥温度为 %d°C。"
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " 最低干燥温度为 "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s 的最低干燥温度为 %d°C。"
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21345,6 +21623,97 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid "Other"
+#~ msgstr "其他"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "左: "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "右: "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "最高温度不可超过 "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "最低温度不可低于 "
+
+#~ msgid "up to"
+#~ msgstr "达到"
+
+#~ msgid "above"
+#~ msgstr "高于"
+
+#~ msgid "from"
+#~ msgstr "从"
+
+#~ msgid "Configuration package: "
+#~ msgstr "配置包："
+
+#~ msgid " updated to "
+#~ msgstr "更新到"
+
+#~ msgid "Grouping error: "
+#~ msgstr "分组错误："
+
+#~ msgid " can not be placed in the "
+#~ msgstr "不能放置在"
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " 最高干燥温度为 "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " 最低干燥温度为 "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "需要"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "未开启"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "材料未发布"
+
+#~ msgid "Select the language"
+#~ msgstr "选择语言"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "选择插件"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充顶面的方向。\n"
+#~ "向外从表面中心开始，因此多余的材料会被推向边缘等最不显眼的位置。向内从边缘开始，并以中心处的紧密曲线结束。\n"
+#~ "默认使用最短路径排序，可能沿任一方向进行。"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充底面的方向。\n"
+#~ "向内以较宽的外侧曲线开始每个表面，这可以改善在热床上的首层附着，因为中心处的紧密曲线可能无法粘牢。向外从中心开始，将多余的材料推向边缘。\n"
+#~ "默认使用最短路径排序，可能沿任一方向进行。"
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "如果启用，将不会在没有换色的层打印擦拭塔。存在换色的层时，挤出机将降低高度打印擦拭塔。用户应该确保不会与打印内容发生冲突。"
+
+#~ msgid "This exports settings to a file."
+#~ msgstr "导出配置到文件。"
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "原生 Wayland 实时画面需要 GStreamer GTK 视频接收器。请安装 GStreamer 的 gtksink 插件，然后重启 OrcaSlicer。"
 
diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
index ded90c8950..b60602ca38 100644
--- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
+++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-02 09:39-0300\n"
+"POT-Creation-Date: 2026-09-17 12:41-0300\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -2425,15 +2425,6 @@ msgstr "有可用的更新。請開啟預設組合對話框進行更新。"
 msgid "%s has been removed."
 msgstr "%s 已移除。"
 
-msgid "Switching application language"
-msgstr "切換應用程式語言"
-
-msgid "Select the language"
-msgstr "選擇語言"
-
-msgid "Language"
-msgstr "語言"
-
 # AI Translated
 #, c-format, boost-format
 msgid "Switching Orca Slicer to language %s failed."
@@ -3672,11 +3663,15 @@ msgstr "在 Filament Track Switch 退回目前線材"
 msgid "Switch track at Filament Track Switch"
 msgstr "在 Filament Track Switch 切換軌道"
 
-msgid "The maximum temperature cannot exceed "
-msgstr "最高溫度不能超過 "
+# AI Translated
+#, c-format, boost-format
+msgid "The maximum temperature cannot exceed %d"
+msgstr "最高溫度不能超過 %d"
 
-msgid "The minmum temperature should not be less than "
-msgstr "最低溫度不應低於 "
+# AI Translated
+#, c-format, boost-format
+msgid "The minimum temperature should not be less than %d"
+msgstr "最低溫度不應低於 %d"
 
 msgid "Type to filter..."
 msgstr "輸入以篩選..."
@@ -4552,6 +4547,15 @@ msgstr ""
 "錯誤訊息：%1%將臨時的 G-code 複製到輸出的 G-code 失敗 ，也許 SD 卡寫入被鎖定？\n"
 "錯誤訊息：%1%"
 
+# AI Translated
+#, boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed.\n"
+"Error message: %1%"
+msgstr ""
+"將暫存 G-code 複製到輸出 G-code 失敗。\n"
+"錯誤訊息：%1%"
+
 #, boost-format
 msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
 msgstr "將臨時 G-code 複製到輸出 G-code 時失敗。目標裝置可能存在問題，請嘗試再次匯出或使用不同的裝置。損壞的 G-code 已輸出為 %1%.tmp。將臨時 G-code 複製到輸出 G-code 時失敗。目標裝置可能存在問題，請嘗試再次匯出或使用不同的裝置。損壞的 G-code 已輸出為 %1%.tmp。"
@@ -4872,6 +4876,9 @@ msgstr ""
 "是 - 自動調整這些設定並啟用花瓶模式\n"
 "否 - 不使用花瓶模式"
 
+msgid "N/A"
+msgstr "不適用"
+
 msgid "Printing"
 msgstr "列印中"
 
@@ -5302,14 +5309,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d."
 msgstr "數值 %s 超出範圍。有效範圍是從 %d 到 %d。"
 
 #, c-format, boost-format
-msgid ""
-"Is it %s%% or %s %s?\n"
-"YES for %s%%, \n"
-"NO for %s %s."
-msgstr ""
-"是 %s%% 還是 %s %s？\n"
-"選『是』代表 %s%%，\n"
-"選『否』代表 %s %s。"
+msgid "Is it %s%% or %s %s?"
+msgstr "是 %s%% 還是 %s %s？"
+
+msgid "%"
+msgstr "%"
 
 #, boost-format
 msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\""
@@ -5331,29 +5335,22 @@ msgstr "無效的格式。請使用 N、N#K 或逗號分隔的清單，每個項
 msgid "Invalid format. Expected vector format: \"%1%\""
 msgstr "無效格式，應該是「%1%」這種格式"
 
-msgid "N/A"
-msgstr "不適用"
-
 # AI Translated
 msgid "System agents"
 msgstr "系統代理程式"
 
-# AI Translated
-msgid "No plugin selected"
-msgstr "未選擇外掛"
-
 # AI Translated
 msgid "Add plugin"
 msgstr "新增外掛"
 
-# AI Translated
-msgid "Select plugin"
-msgstr "選擇外掛"
-
 # AI Translated
 msgid "Remove plugin"
 msgstr "移除外掛"
 
+# AI Translated
+msgid "No plugin selected"
+msgstr "未選擇外掛"
+
 # AI Translated
 msgid "Configure"
 msgstr "設定"
@@ -5609,14 +5606,20 @@ msgstr "設為最佳"
 msgid "Regroup filament"
 msgstr "重新分組線材"
 
-msgid "up to"
-msgstr "達到"
+# AI Translated
+#, boost-format
+msgid "up to %1% mm"
+msgstr "最高 %1% mm"
 
-msgid "above"
-msgstr "高於"
+# AI Translated
+#, boost-format
+msgid "above %1% mm"
+msgstr "高於 %1% mm"
 
-msgid "from"
-msgstr "從"
+# AI Translated
+#, boost-format
+msgid "from %1% to %2% mm"
+msgstr "從 %1% mm 到 %2% mm"
 
 msgid "Usage"
 msgstr "使用情況"
@@ -5976,7 +5979,7 @@ msgstr "體積："
 msgid "Size:"
 msgstr "尺寸："
 
-#, boost-format
+#, c-format, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "發現 G-code 路徑在 %d 層，Z = %.2lf mm 處的衝突。請將有衝突的物件分離得更遠（%s <-> %s）。"
 
@@ -6289,6 +6292,14 @@ msgstr "另存專案為"
 msgid "Save current project as"
 msgstr "將目前專案另存為"
 
+# AI Translated
+msgid "Publish 3MF"
+msgstr "發布 3MF"
+
+# AI Translated
+msgid "Export a 3MF file with the selected settings embedded"
+msgstr "匯出內嵌所選設定的 3MF 檔案"
+
 msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr "匯入 3MF/STL/STEP/SVG/OBJ/AMF"
 
@@ -7550,6 +7561,14 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "底部"
 
+# AI Translated
+msgid "This setting does not specify a plugin capability type."
+msgstr "此設定未指定外掛能力類型。"
+
+# AI Translated
+msgid "This setting specifies an unrecognized plugin capability type: "
+msgstr "此設定指定了無法識別的外掛能力類型： "
+
 # AI Translated
 msgid "Plugin Selection"
 msgstr "外掛選擇"
@@ -8110,6 +8129,14 @@ msgstr "請確認這些預設中的 G-code 是安全的，以防止對列印裝
 msgid "Customized Preset"
 msgstr "自訂預設"
 
+# AI Translated
+msgid "Some published settings could not be applied:"
+msgstr "部分已發布的設定無法套用："
+
+# AI Translated
+msgid "Some filament slots were changed:"
+msgstr "部分線材槽位已變更："
+
 msgid "Component name(s) inside step file not in UTF-8 format!"
 msgstr "STEP 檔案內部元件的名稱不是 UTF-8 格式！"
 
@@ -8520,6 +8547,21 @@ msgstr "切片檔案另存為："
 msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer."
 msgstr "檔案 %s 已經傳送到列印裝置的儲存空間，可以在列印裝置上瀏覽。"
 
+# AI Translated
+msgid "Publish 3MF file as:"
+msgstr "發布 3MF 檔案為："
+
+# AI Translated
+msgid ""
+"Failed to export the published 3MF file.\n"
+"Please check whether the folder exists online or if other programs have the file open."
+msgstr ""
+"匯出已發布的 3MF 檔案失敗。\n"
+"請檢查該資料夾是否在線上可用，或檔案是否被其他程式開啟。"
+
+msgid "Publish"
+msgstr "發布"
+
 msgid "The nozzle type is not set. Please set the nozzle and try again."
 msgstr "噴嘴類型尚未設定。請設定噴嘴後再試一次。"
 
@@ -8730,9 +8772,6 @@ msgstr "是否繼續？"
 msgid "Language selection"
 msgstr "語言選擇"
 
-msgid "Switching application language while some presets are modified."
-msgstr "在切換應用程式語言之前發現某些參數預設有更改。"
-
 msgid "Asia-Pacific"
 msgstr "亞太"
 
@@ -8837,6 +8876,9 @@ msgstr "目前實例路徑："
 msgid "General"
 msgstr "一般"
 
+msgid "Language"
+msgstr "語言"
+
 msgid "Metric"
 msgstr "公制"
 
@@ -9275,9 +9317,6 @@ msgstr "在切片預覽中拖曳層滑桿時，將目前層以下的各層算繪
 msgid "Dimmed layer brightness"
 msgstr "變暗層的亮度"
 
-msgid "%"
-msgstr "%"
-
 # AI Translated
 msgid ""
 "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n"
@@ -9662,9 +9701,6 @@ msgstr "發布頁面"
 msgid "Note: The preparation may take several minutes. Please be patient."
 msgstr "提示：發布前需要一些準備時間，請耐心等待。"
 
-msgid "Publish"
-msgstr "發布"
-
 msgid "Publish was canceled"
 msgstr "發布已取消"
 
@@ -9680,6 +9716,81 @@ msgstr "正在上傳資料"
 msgid "Jump to webpage"
 msgstr "跳至網頁"
 
+# AI Translated
+msgid "Material"
+msgstr "材料"
+
+# AI Translated
+msgid "Mixed filament"
+msgstr "混合線材"
+
+# AI Translated
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr "部分混合線材依賴不會被發布的線材："
+
+# AI Translated
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr "線材 %d（混合）"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, which is not enabled."
+msgstr "%1% 需要 %2%，但它未啟用。"
+
+# AI Translated
+#, boost-format
+msgid "%1% needs %2%, whose material will not be published."
+msgstr "%1% 需要 %2%，但其材料不會被發布。"
+
+# AI Translated
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr "若要發布混合線材，請啟用它所使用的每一種線材，並選擇「完整發布」或滿足其「類型」需求。"
+
+# AI Translated
+msgid "Publish anyway"
+msgstr "仍要發布"
+
+# AI Translated
+msgid "Publish 3MF..."
+msgstr "發布 3MF..."
+
+# AI Translated
+msgid "Select which settings to be published in the 3MF file"
+msgstr "選擇要在 3MF 檔案中發布的設定"
+
+# AI Translated
+msgid "Publish 3MF Wiki"
+msgstr "發布 3MF Wiki"
+
+# AI Translated
+msgid "Publish 3MF Video Guide"
+msgstr "發布 3MF 影片指南"
+
+# AI Translated
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr "混合線材 - 在上方選擇「啟用」後將整體發布"
+
+# AI Translated
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr "發布此混合線材，並啟用 + 完整發布其組成線材"
+
+# AI Translated
+msgid "Publish this filament slot in the 3MF file"
+msgstr "在 3MF 檔案中發布此線材槽位"
+
+# AI Translated
+msgid "Full Publish"
+msgstr "完整發布"
+
+# AI Translated
+msgid "Embed the entire filament of this slot in the 3MF file"
+msgstr "將此槽位的整條線材內嵌到 3MF 檔案中"
+
+# AI Translated
+msgid "Filter non-selected"
+msgstr "篩選未選項"
+
 #, c-format, boost-format
 msgid "Save %s as"
 msgstr "另存 %s 為"
@@ -9697,6 +9808,10 @@ msgstr "將父配置繼承的所有數值複製到目前的配置，並解除繼
 msgid "Detach from parent"
 msgstr "從父預設分離"
 
+# AI Translated
+msgid "Save without parent"
+msgstr "不保留父預設另存"
+
 # AI Translated
 msgid "Unique preset"
 msgstr "獨立配置"
@@ -10400,9 +10515,17 @@ msgstr "堵塞偵測需要換料塔。若沒有換料塔，列印物件上可能
 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?"
 msgstr "同時啟用精確 Z 高度和擦拭塔可能會導致切片錯誤。您仍然要啟用精確 Z 高度嗎？"
 
+# AI Translated
+msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off."
+msgstr "平滑模式的縮時攝影需要每層都有換料塔，因此與「取消稀疏層」不相容。「取消稀疏層」已關閉。"
+
 msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?"
 msgstr "平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要啟用換料塔？"
 
+# AI Translated
+msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode."
+msgstr "「取消稀疏層」與平滑模式的縮時攝影不相容，後者需要每層都有換料塔。縮時攝影已切換為傳統模式。"
+
 msgid "Still print by object?"
 msgstr "持續逐件列印？"
 
@@ -10772,9 +10895,6 @@ msgstr "相容的切片設定"
 msgid "Printable space"
 msgstr "可列印區域"
 
-msgid "Printer Agent"
-msgstr "列印裝置代理"
-
 msgid "Select the network agent implementation for printer communication. Available agents are registered at startup."
 msgstr "選擇列印裝置通訊的網路代理實施。可用代理在啟動時註冊。"
 
@@ -11176,14 +11296,6 @@ msgstr "擠出機數量"
 msgid "Capabilities"
 msgstr "能力"
 
-# AI Translated
-msgid "Left: "
-msgstr "左： "
-
-# AI Translated
-msgid "Right: "
-msgstr "右： "
-
 msgid "Show all presets (including incompatible)"
 msgstr "顯示所有預設（包括不相容的）"
 
@@ -12026,15 +12138,22 @@ msgstr "修復被取消"
 msgid "Copying of file %1% to %2% failed: %3%"
 msgstr "從 %1% 複製檔案到 %2% 失敗：%3%"
 
+# AI Translated
+msgid "Downloading new vendor profile(s): "
+msgstr "正在下載新的廠牌設定檔： "
+
+# AI Translated
+#, boost-format
+msgid "Configuration package: %1% updated to %2%"
+msgstr "設定檔：%1% 已更新到 %2%"
+
+# AI Translated
+msgid "Failed to download vendor profile(s): "
+msgstr "下載廠牌設定檔失敗： "
+
 msgid "Please check any unsaved changes before updating the configuration."
 msgstr "在設定更新之前需要檢查未儲存的設定變更。"
 
-msgid "Configuration package: "
-msgstr "設定檔："
-
-msgid " updated to "
-msgstr "更新到 "
-
 msgid "Open G-code file:"
 msgstr "開啟 G-code 檔案："
 
@@ -12094,11 +12213,15 @@ msgstr ""
 msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2."
 msgstr "輸入整形僅受 Klipper、RepRapFirmware 和 Marlin 2 支援"
 
-msgid "Grouping error: "
-msgstr "分組錯誤："
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the left nozzle"
+msgstr "分組錯誤：%1% 無法放入左噴嘴"
 
-msgid " can not be placed in the "
-msgstr "無法放置於"
+# AI Translated
+#, boost-format
+msgid "Grouping error: %1% cannot be placed in the right nozzle"
+msgstr "分組錯誤：%1% 無法放入右噴嘴"
 
 # AI Translated
 msgid "Group error in manual mode. Please check nozzle count or regroup."
@@ -12212,6 +12335,10 @@ msgstr "%1% 離其它物件太近，可能會發生碰撞。"
 msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% 太高，會發生碰撞。"
 
+# AI Translated
+msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."
+msgstr "模型與換料塔的相對位置不符合「取消稀疏層」功能的需求。請調整兩者的相對位置、降低模型高度，或關閉「取消稀疏層」。"
+
 msgid " is too close to exclusion area, there may be collisions when printing."
 msgstr "離淨空區域太近，列印時可能會發生碰撞。"
 
@@ -12555,6 +12682,9 @@ msgstr "使用 3MF 取代 G-code"
 msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file."
 msgstr "若列印裝置接受 3MF 檔案作為列印作業，請啟用此選項。啟用後，Orca Slicer 會將切片後的檔案以 .gcode.3mf 形式傳送，而非單純的 .gcode 檔案。"
 
+msgid "Printer Agent"
+msgstr "列印裝置代理"
+
 msgid "Select the network agent implementation for printer communication."
 msgstr "選擇用於列印裝置通訊的網路代理實作。"
 
@@ -13572,6 +13702,10 @@ msgstr "直線排列"
 msgid "Concentric"
 msgstr "同心"
 
+# AI Translated
+msgid "Spiral Inset"
+msgstr "螺旋內縮"
+
 msgid "Hilbert Curve"
 msgstr "希爾伯特曲線"
 
@@ -13663,13 +13797,13 @@ msgstr "頂面填充順序"
 
 # AI Translated
 msgid ""
-"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，頂面填充的方向。\n"
-"「向外」從表面中心開始，因此多餘的材料會被推向最不明顯的邊緣。「向內」從邊緣開始，並以中心的緊密曲線結束。\n"
-"預設使用最短路徑排序，方向可能為任一種。"
+"使用以中心為起點的圖案（同心、螺旋內縮、阿基米德和弦、八角螺旋）時，頂面的填充方向。\n"
+"向外從表面中心開始，多餘的材料會被推向邊緣，在該處最不明顯。向內從邊緣開始，並以中心處的緊密曲線結束。\n"
+"預設使用最短路徑排序，方向可能為兩者之一。"
 
 # AI Translated
 msgid "Bottom surface fill order"
@@ -13677,13 +13811,13 @@ msgstr "底面填充順序"
 
 # AI Translated
 msgid ""
-"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n"
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，底面填充的方向。\n"
-"「向內」讓每個表面從較寬的外側曲線開始，可改善中心緊密曲線可能無法附著的列印板上的第一層附著。「向外」從中心開始，將多餘的材料推向邊緣。\n"
-"預設使用最短路徑排序，方向可能為任一種。"
+"使用以中心為起點的圖案（同心、螺旋內縮、阿基米德和弦、八角螺旋）時，底面的填充方向。\n"
+"向內讓每個表面從較寬的外側曲線開始，可改善首層在列印板上的黏著，尤其當中心處的緊密曲線不易黏牢時。向外從中心開始，將多餘的材料推向邊緣。\n"
+"預設使用最短路徑排序，方向可能為兩者之一。"
 
 msgid "Internal solid infill pattern"
 msgstr "內部實心填充圖案"
@@ -13782,6 +13916,14 @@ msgstr "逆時針"
 msgid "Clockwise"
 msgstr "順時針"
 
+# AI Translated
+msgid "Distance to rod"
+msgstr "至桿件的距離"
+
+# AI Translated
+msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."
+msgstr "噴嘴尖端到桿件較遠一側邊緣的水平距離。用於逐件列印時的避障。"
+
 msgid "Height to rod"
 msgstr "到橫杆高度"
 
@@ -15946,6 +16088,20 @@ msgstr "偵測懸空外牆"
 msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used."
 msgstr "偵測懸空相對於線寬的百分比，並套用不同的速度列印。100%% 的懸空將使用橋接速度。"
 
+# AI Translated
+msgid "Print unsupported walls last"
+msgstr "最後列印無支撐的牆"
+
+# AI Translated
+msgid ""
+"Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor."
+msgstr ""
+"完全懸空的牆迴圈會等到有東西能夠承托它們時才列印：\n"
+"無論牆的順序為何，它們都在同一島嶼的其他牆之後擠出，從最內側開始。\n"
+"只能由本層橋接錨定的迴圈會等待這些橋接列印完成；而沿著有支撐的牆延伸的迴圈則保持在填充之前的位置，因為填充需要它作為錨點。"
+
 msgid "Outer walls"
 msgstr "外牆"
 
@@ -16381,6 +16537,39 @@ msgstr "閉環擦拭"
 msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop."
 msgstr "為了降低閉環擠出中接縫的可見性，在擠出機退出閉環前會進行一次微小的內縮移動。"
 
+# AI Translated
+msgid "Wipe inward"
+msgstr "向內擦拭"
+
+# AI Translated
+msgid ""
+"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n"
+"\n"
+"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n"
+"\n"
+"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps."
+msgstr ""
+"僅適用於外牆，包括孔洞邊界。擦拭時將高溫噴嘴移向已列印的內牆，以減少剛列印塑膠的二次受熱與接縫痕跡。\n"
+"\n"
+"在層高低於 0.1 mm 時特別有用，此時擦拭痕跡更明顯。\n"
+"\n"
+"若相鄰內牆尚未列印（單牆區域或外牆/內牆順序），或找不到有支撐的向內路徑（例如在銳角或接縫間隙處），則使用一般擦拭。"
+
+# AI Translated
+msgid "Wipe inward distance"
+msgstr "向內擦拭距離"
+
+# AI Translated
+#, no-c-format, no-boost-format
+msgid ""
+"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n"
+"\n"
+"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset."
+msgstr ""
+"擦拭路徑偏離外牆輪廓的距離，以公釐或實際外牆擠出寬度的百分比指定。\n"
+"\n"
+"例如，50% 會將路徑偏移外牆寬度的一半。實際偏移量同時受實際外牆寬度與到相鄰牆的可用間距限制，因此超過 100% 的值或等效的絕對距離不會產生額外效果。設為 0 可停用偏移。"
+
 msgid "Wipe before external loop"
 msgstr "外牆迴圈前的擦拭動作"
 
@@ -16635,8 +16824,9 @@ msgstr "取用新工具時不等待其達到列印溫度，先移動到換料塔
 msgid "No sparse layers (beta)"
 msgstr "取消稀疏層（Beta）"
 
-msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
-msgstr "啟用此選項後，換料塔將不會在沒有工具更換的層中列印。在有工具更換的層中，擠出機將向下移動以列印換料塔。請使用者自行確保清洗塔與列印物之間不會發生碰撞。"
+# AI Translated
+msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."
+msgstr "啟用後，換料塔不會在沒有換工具的層上列印。在有換工具的層上，擠出機會向下移動去列印換料塔，因此塔會低於模型，工具頭必須向下伸到該處。若這樣會與已列印的物件發生碰撞，該配置將被拒絕。對平滑模式的縮時攝影或噴嘴結塊偵測無效，因為它們需要每層都有塔。"
 
 msgid "Prime all printing extruders"
 msgstr "所有擠出機畫線"
@@ -16662,6 +16852,34 @@ msgstr ""
 msgid "Cyclic"
 msgstr "循環"
 
+# AI Translated
+msgid "Cyclic order"
+msgstr "循環順序"
+
+# AI Translated
+msgid ""
+"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+"Leave empty to cycle through the filaments in ascending order."
+msgstr ""
+"循環換工具排序所使用的自訂線材序列，以逗號分隔的線材編號表示（例如「3,2,1,4」）。\n"
+"每一層依此序列列印其線材；未列出的線材最後列印，並依遞增順序排列。\n"
+"留空則依遞增順序循環使用各線材。"
+
+# AI Translated
+msgid "Apply cyclic order to first layer"
+msgstr "對首層套用循環順序"
+
+# AI Translated
+msgid ""
+"Applies the cyclic toolchange order to the first layer as well.\n"
+"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n"
+"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization."
+msgstr ""
+"將循環換工具順序同樣套用於首層。\n"
+"預設為關閉，因為首層改為依最佳列印板黏著排序：列印首層細小脆弱特徵的線材會最後列印，如此後續的換工具與空駛就不易將這些附著薄弱的部分蹭掉。若已設定自訂首層線材序列，此首層順序也會遵循它。循環順序的好處（額外的換工具讓每層有更多冷卻時間）並不適用於首層，因為首層為了黏著會以慢速高溫列印。\n"
+"僅當你需要包含首層在內的每一層都使用完全相同的換工具順序時才啟用此項，代價是失去上述黏著最佳化。"
+
 msgid "Slice gap closing radius"
 msgstr "切片間隙閉合半徑"
 
@@ -16671,9 +16889,6 @@ msgstr "在三角網格切片過程中，寬度小於 2 倍間隙閉合半徑的
 msgid "Slicing Mode"
 msgstr "切片模式"
 
-msgid "Other"
-msgstr "其他"
-
 msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
 msgstr "針對 3DLabPrint 飛機模型，請選擇『奇偶』模式。若需閉合模型中的所有孔洞，請啟用『閉合孔洞』選項。"
 
@@ -17659,6 +17874,14 @@ msgstr "不檢查"
 msgid "Do not run any validity checks, such as G-code path conflicts check."
 msgstr "不要執行任何有效性檢查，如 G-code 路徑衝突檢查。"
 
+# AI Translated
+msgid "Strict mode"
+msgstr "嚴格模式"
+
+# AI Translated
+msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check."
+msgstr "當切片產生原本僅記入日誌的非嚴重警告時（例如停用支撐卻需要支撐的模型），以非零狀態碼結束。請在絕不能交付存在隱蔽缺陷切片結果的 CI 或指令碼流程中使用。每一則此類警告還會以穩定的類別列在 result.json 的 `warnings` 陣列中，該檔案僅在 Linux 上產生。不能與 --no-check 同時使用，後者會略過支撐檢查。"
+
 msgid "Normative check"
 msgstr "規範符合性偵測"
 
@@ -17671,12 +17894,28 @@ msgstr "輸出模型資訊"
 msgid "This outputs the model’s information."
 msgstr "輸出模型資訊。"
 
+# AI Translated
+msgid "Inspect mesh (JSON to stdout)"
+msgstr "檢查網格（JSON 輸出至 stdout）"
+
+# AI Translated
+msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info."
+msgstr "將每個已載入物件的 JSON 摘要輸出至 stdout，然後結束：包括其邊界框，以及可供放置的凸包面及其法線、面積與中心。--ground-* 選項正是從這些面中選擇。--info 的機器可讀替代方案。"
+
+# AI Translated
+msgid "Inspect paint (JSON to stdout)"
+msgstr "檢查繪製（JSON 輸出至 stdout）"
+
+# AI Translated
+msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI."
+msgstr "輸出已載入模型上已儲存的每個繪製圖層（支撐、接縫、MMU 顏色、絨毛表面）的結構化 JSON 摘要 — 每種狀態的面片數量、表面積與網格局部邊界框 — 然後結束。在圖形介面中開啟繪製工具的機器可讀替代方案。"
+
 msgid "Export Settings"
 msgstr "匯出設定"
 
 # AI Translated
-msgid "This exports settings to a file."
-msgstr "將設定匯出至檔案。"
+msgid "This exports settings to a file. Use - to write them to stdout."
+msgstr "將設定匯出至檔案。使用 - 可將其寫入 stdout。"
 
 msgid "Send progress to pipe"
 msgstr "將進度傳送到 Pipe"
@@ -17732,6 +17971,30 @@ msgstr "繞 Y 旋轉"
 msgid "Rotation angle around the Y axis in degrees."
 msgstr "繞 Y 軸的旋轉角度（以度為單位）。"
 
+# AI Translated
+msgid "Ground largest face"
+msgstr "以最大面著床"
+
+# AI Translated
+msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "將每個物件以其凸包的最大面放置，並落到列印板上。若有多個同樣大的面，則保留已經朝下的那一個。沒有足夠大可供放置的面的物件維持原狀。變換依命令列中的先後順序執行，因此在此選項之前給定的旋轉會被保留。--orient 1 在所有變換之後執行，並會取代定向。"
+
+# AI Translated
+msgid "Ground face by normal"
+msgstr "依法線以指定面著床"
+
+# AI Translated
+msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "將每個物件以其凸包中外法線最接近方向 NX,NY,NZ 的面放置，並落到列印板上。該方向使用物件座標系，其中包含在此選項之前給定的旋轉；除非輸入檔案旋轉了該物件，否則它與列印板的座標軸一致。例如，1,0,0 會讓物件以 +X 面站立。--orient 1 在所有變換之後執行，並會取代定向。"
+
+# AI Translated
+msgid "Ground face at point"
+msgstr "以指定點所在面著床"
+
+# AI Translated
+msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation."
+msgstr "將每個物件以其凸包中包含點 X,Y,Z 的面放置，並落到列印板上。該點使用物件座標系，其中包含在此選項之前給定的旋轉；--inspect-mesh 回報的面中心也使用該座標系。沒有此類面的物件維持原狀；若所有物件都沒有此類面，則本次執行失敗。--orient 1 在所有變換之後執行，並會取代定向。"
+
 msgid "Scale the model by a float factor."
 msgstr "依浮點數比例縮放模型"
 
@@ -20832,6 +21095,18 @@ msgstr "此操作無法撤消。繼續？"
 msgid "Skipping objects."
 msgstr "跳過物件。"
 
+# AI Translated
+msgid "Material Ratio"
+msgstr "材料比例"
+
+# AI Translated
+msgid "Model Height"
+msgstr "模型高度"
+
+# AI Translated
+msgid "Ratio"
+msgstr "比例"
+
 msgid "Select Filament"
 msgstr "選擇線材"
 
@@ -21088,12 +21363,14 @@ msgid "Drying-Dehumidifying"
 msgstr "烘乾—除濕"
 
 # AI Translated
-msgid " maximum drying temperature is "
-msgstr " 最高烘乾溫度為 "
+#, c-format, boost-format
+msgid "%s maximum drying temperature is %d°C."
+msgstr "%s 的最高烘乾溫度為 %d°C。"
 
 # AI Translated
-msgid " minimum drying temperature is "
-msgstr " 最低烘乾溫度為 "
+#, c-format, boost-format
+msgid "%s minimum drying temperature is %d°C."
+msgstr "%s 的最低烘乾溫度為 %d°C。"
 
 # AI Translated
 msgid "This filament may not be completely dried."
@@ -21559,6 +21836,98 @@ msgstr ""
 "避免翹曲\n"
 "您知道嗎？當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度可以降低翹曲的機率。"
 
+#~ msgid "Other"
+#~ msgstr "其他"
+
+# AI Translated
+#~ msgid "Left: "
+#~ msgstr "左： "
+
+# AI Translated
+#~ msgid "Right: "
+#~ msgstr "右： "
+
+#~ msgid "The maximum temperature cannot exceed "
+#~ msgstr "最高溫度不能超過 "
+
+#~ msgid "The minmum temperature should not be less than "
+#~ msgstr "最低溫度不應低於 "
+
+#~ msgid "up to"
+#~ msgstr "達到"
+
+#~ msgid "above"
+#~ msgstr "高於"
+
+#~ msgid "from"
+#~ msgstr "從"
+
+#~ msgid "Configuration package: "
+#~ msgstr "設定檔："
+
+#~ msgid " updated to "
+#~ msgstr "更新到 "
+
+#~ msgid "Grouping error: "
+#~ msgstr "分組錯誤："
+
+#~ msgid " can not be placed in the "
+#~ msgstr "無法放置於"
+
+# AI Translated
+#~ msgid " maximum drying temperature is "
+#~ msgstr " 最高烘乾溫度為 "
+
+# AI Translated
+#~ msgid " minimum drying temperature is "
+#~ msgstr " 最低烘乾溫度為 "
+
+# AI Translated
+#~ msgid "needs"
+#~ msgstr "需要"
+
+# AI Translated
+#~ msgid "not enabled"
+#~ msgstr "未啟用"
+
+# AI Translated
+#~ msgid "material not published"
+#~ msgstr "材料未發布"
+
+#~ msgid "Select the language"
+#~ msgstr "選擇語言"
+
+# AI Translated
+#~ msgid "Select plugin"
+#~ msgstr "選擇外掛"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，頂面填充的方向。\n"
+#~ "「向外」從表面中心開始，因此多餘的材料會被推向最不明顯的邊緣。「向內」從邊緣開始，並以中心的緊密曲線結束。\n"
+#~ "預設使用最短路徑排序，方向可能為任一種。"
+
+# AI Translated
+#~ msgid ""
+#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n"
+#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
+#~ "Default uses shortest-path ordering, which may run in either direction."
+#~ msgstr ""
+#~ "使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，底面填充的方向。\n"
+#~ "「向內」讓每個表面從較寬的外側曲線開始，可改善中心緊密曲線可能無法附著的列印板上的第一層附著。「向外」從中心開始，將多餘的材料推向邊緣。\n"
+#~ "預設使用最短路徑排序，方向可能為任一種。"
+
+#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+#~ msgstr "啟用此選項後，換料塔將不會在沒有工具更換的層中列印。在有工具更換的層中，擠出機將向下移動以列印換料塔。請使用者自行確保清洗塔與列印物之間不會發生碰撞。"
+
+# AI Translated
+#~ msgid "This exports settings to a file."
+#~ msgstr "將設定匯出至檔案。"
+
 #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer."
 #~ msgstr "原生 Wayland 即時檢視需要 GStreamer GTK 視訊接收器。請為 GStreamer 安裝 gtksink 外掛程式，然後重新啟動 OrcaSlicer。"
 
diff --git a/resources/data/hints.ini b/resources/data/hints.ini
index 15d2758551..a71fb868f9 100644
--- a/resources/data/hints.ini
+++ b/resources/data/hints.ini
@@ -75,7 +75,7 @@ documentation_link = https://www.orcaslicer.com/wiki/material_temperatures#print
 
 [hint:Calibration]
 text = Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer.
-documentation_link = https://www.orcaslicer.com/wiki/calibration
+documentation_link = https://www.orcaslicer.com/wiki/calibration_guide
 
 [hint:Auxiliary fan]
 text = Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooling fan?
diff --git a/resources/images/menu_publish.svg b/resources/images/menu_publish.svg
new file mode 100644
index 0000000000..e444623e33
--- /dev/null
+++ b/resources/images/menu_publish.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M1.5,8 14.5,1.5 7.5,14.5 6.3,9.7 Z" style="fill:none;stroke:gray;stroke-linecap:round;stroke-linejoin:round"/></svg>
diff --git a/resources/images/param_add.svg b/resources/images/param_add.svg
index 71ea5092af..b00140b68a 100644
--- a/resources/images/param_add.svg
+++ b/resources/images/param_add.svg
@@ -1,8 +1,4 @@
-<svg width="25" height="25" xmlns="http://www.w3.org/2000/svg" fill="none">
-
- <g>
-  <title>Layer 1</title>
-  <path id="svg_1" stroke-linecap="round" stroke-width="2" stroke="#262E30" d="m1,12.5l23,0"/>
-  <path id="svg_2" stroke-linecap="round" stroke-width="2" stroke="#262E30" d="m12.5,24l0,-23"/>
- </g>
-</svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16">
+<line x1="0.5" y1="7.5" x2="14.5" y2="7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
+<line x1="7.5" y1="0.5" x2="7.5" y2="14.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
+</svg>
\ No newline at end of file
diff --git a/resources/profiles/Afinia.json b/resources/profiles/Afinia.json
index 517d0148c3..e65ced0f68 100644
--- a/resources/profiles/Afinia.json
+++ b/resources/profiles/Afinia.json
@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Afinia/machine/Afinia H+1(HS).json b/resources/profiles/Afinia/machine/Afinia H+1(HS).json
index fc724895ef..87e6a0e6a6 100644
--- a/resources/profiles/Afinia/machine/Afinia H+1(HS).json	
+++ b/resources/profiles/Afinia/machine/Afinia H+1(HS).json	
@@ -8,5 +8,5 @@
 	"bed_model": "",
 	"bed_texture": "",
 	"hotend_model": "",
-	"default_materials": "Afinia ABS;Afinia PLA"
+	"default_materials": "Afinia ABS@HS;Afinia PLA@HS"
 }
diff --git a/resources/profiles/Afinia/machine/fdm_afinia_common.json b/resources/profiles/Afinia/machine/fdm_afinia_common.json
index 9a567074ca..2ddf8bbd40 100644
--- a/resources/profiles/Afinia/machine/fdm_afinia_common.json
+++ b/resources/profiles/Afinia/machine/fdm_afinia_common.json
@@ -1,9 +1,9 @@
 {
 	"type": "machine",
 	"name": "fdm_afinia_common",
+	"inherits": "fdm_machine_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_machine_common",
 	"gcode_flavor": "klipper",
 	"machine_max_acceleration_e": [
 		"5000",
@@ -117,15 +117,12 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
 		"1"
 	],
-	"default_filament_profile": [
-		""
-	],
+	"default_filament_profile": [],
 	"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
 	"bed_exclude_area": [
 		"0x0"
diff --git a/resources/profiles/Afinia/machine/fdm_machine_common.json b/resources/profiles/Afinia/machine/fdm_machine_common.json
index d4a5c3be25..fbe40f97e3 100644
--- a/resources/profiles/Afinia/machine/fdm_machine_common.json
+++ b/resources/profiles/Afinia/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json
index 571fdf3e01..8f1a939266 100644
--- a/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Afinia H+1(HS) 0.6 nozzle"
 	]
diff --git a/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json
index 1d984a149d..3a3c297454 100644
--- a/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a balanced layer height for good quality and reasonable printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Afinia H+1(HS) 0.6 nozzle"
 	]
diff --git a/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json
index 187bb12009..ed544ebe3f 100644
--- a/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Afinia H+1(HS) 0.6 nozzle"
 	]
diff --git a/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json
index 63fc4df090..6a87a835c9 100644
--- a/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height with optimized settings for stronger parts.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"sparse_infill_density": "25%",
 	"wall_loops": "3",
 	"compatible_printers": [
diff --git a/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json
index c693fc468b..0417c687ec 100644
--- a/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Afinia H+1(HS) 0.6 nozzle"
 	]
diff --git a/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json
index e9f4057178..5dcb70660c 100644
--- a/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json	
+++ b/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Afinia H+1(HS) 0.6 nozzle"
 	]
diff --git a/resources/profiles/Afinia/process/fdm_process_afinia_common.json b/resources/profiles/Afinia/process/fdm_process_afinia_common.json
index 04c0e678ec..803080ada3 100644
--- a/resources/profiles/Afinia/process/fdm_process_afinia_common.json
+++ b/resources/profiles/Afinia/process/fdm_process_afinia_common.json
@@ -21,7 +21,6 @@
 	"top_surface_acceleration": "2000",
 	"initial_layer_acceleration": "500",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "90",
diff --git a/resources/profiles/Afinia/process/fdm_process_common.json b/resources/profiles/Afinia/process/fdm_process_common.json
index ca4d181e78..26eb3a50a0 100644
--- a/resources/profiles/Afinia/process/fdm_process_common.json
+++ b/resources/profiles/Afinia/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "50",
diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json
index 098b1df003..945378db9c 100644
--- a/resources/profiles/Anker.json
+++ b/resources/profiles/Anker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Anker",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Anker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json b/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json
index 7fade72381..d88abdbda4 100644
--- a/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json	
+++ b/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json	
@@ -7,5 +7,5 @@
 	"family": "Anker",
 	"machine_tech": "FFF",
 	"model_id": "V8111v2",
-	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker"
+	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle"
 }
diff --git a/resources/profiles/Anker/machine/Anker M5.json b/resources/profiles/Anker/machine/Anker M5.json
index 5c9839d1ff..6cafaebd42 100644
--- a/resources/profiles/Anker/machine/Anker M5.json	
+++ b/resources/profiles/Anker/machine/Anker M5.json	
@@ -7,5 +7,5 @@
 	"family": "Anker",
 	"machine_tech": "FFF",
 	"model_id": "V8111",
-	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker"
+	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle"
 }
diff --git a/resources/profiles/Anker/machine/Anker M5C.json b/resources/profiles/Anker/machine/Anker M5C.json
index cf539851e5..91cd139cd8 100644
--- a/resources/profiles/Anker/machine/Anker M5C.json	
+++ b/resources/profiles/Anker/machine/Anker M5C.json	
@@ -7,5 +7,5 @@
 	"family": "Anker",
 	"machine_tech": "FFF",
 	"model_id": "V81101C3",
-	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker"
+	"default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle"
 }
diff --git a/resources/profiles/Anker/machine/fdm_machine_common.json b/resources/profiles/Anker/machine/fdm_machine_common.json
index 76e4568f42..b486b69bc1 100644
--- a/resources/profiles/Anker/machine/fdm_machine_common.json
+++ b/resources/profiles/Anker/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 	"extruder_offset": [
 		"0x0"
 	],
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"4000"
 	],
diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json
index 205fd359d8..85dce20a81 100644
--- a/resources/profiles/Anycubic.json
+++ b/resources/profiles/Anycubic.json
@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -64,10 +64,10 @@
 			"name": "Anycubic Kobra S1",
 			"sub_path": "machine/Anycubic Kobra S1.json"
 		},
-        {
-             "name": "Anycubic Kobra S1 Max",
-             "sub_path": "machine/Anycubic Kobra S1 Max.json"
-        },
+		{
+			"name": "Anycubic Kobra S1 Max",
+			"sub_path": "machine/Anycubic Kobra S1 Max.json"
+		},
 		{
 			"name": "Anycubic Kobra X",
 			"sub_path": "machine/Anycubic Kobra X.json"
@@ -90,6 +90,10 @@
 			"name": "fdm_process_common",
 			"sub_path": "process/fdm_process_common.json"
 		},
+		{
+			"name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
 		{
 			"name": "0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json"
@@ -98,6 +102,14 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json"
@@ -106,6 +118,10 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
 		{
 			"name": "0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle",
 			"sub_path": "process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json"
@@ -126,10 +142,22 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
 		{
 			"name": "0.15mm Optimal @Anycubic 4MaxPro2",
 			"sub_path": "process/0.15mm Optimal @Anycubic 4MaxPro2.json"
@@ -162,6 +190,10 @@
 			"name": "0.15mm Optimal @Anycubic i3MegaS",
 			"sub_path": "process/0.15mm Optimal @Anycubic i3MegaS.json"
 		},
+		{
+			"name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm High Quality @Anycubic Kobra X",
 			"sub_path": "process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json"
@@ -186,6 +218,10 @@
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
 		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json"
@@ -194,6 +230,14 @@
 			"name": "0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm High Quality @Anycubic Kobra X",
 			"sub_path": "process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json"
@@ -250,6 +294,10 @@
 			"name": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json"
@@ -294,6 +342,18 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json"
@@ -314,6 +374,10 @@
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
 		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra X",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json"
@@ -362,14 +426,26 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
 		{
 			"name": "0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra 3 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json"
@@ -378,110 +454,30 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
 		{
 			"name": "0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-        {
-        	"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-    		"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-     	},
-     	{
-    		"name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-    		"name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-       		"name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-       		"sub_path": "process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-       		"name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-       		"sub_path": "process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-        	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-        	"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-        {
-    		"name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-
-    	{
-        	"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-    		"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-        {
-      		"name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-     		"sub_path": "process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-        {
-       		"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-       		"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-    	{
-     		"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-       		"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-    	{
-    		"name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-     		"sub_path": "process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-
-        {
-     		"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		{
+			"name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
 		},
-    	{
-        	"name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-        	"sub_path": "process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-     		"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-    		"name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-     		"name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-     		"sub_path": "process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-
-        {
-    		"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-    		"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-    		"name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-     		"name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-    		"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        }
-
+		{
+			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		}
 	],
 	"filament_list": [
 		{
@@ -536,6 +532,22 @@
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra X 0.4 nozzle.json"
@@ -556,6 +568,22 @@
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra X 0.4 nozzle.json"
@@ -564,6 +592,46 @@
 			"name": "Generic ASA @Anycubic",
 			"sub_path": "filament/Generic ASA @Anycubic.json"
 		},
+		{
+			"name": "Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Fiberon PA6-CF20 @Anycubic Kobra S1",
+			"sub_path": "filament/Polymaker/Fiberon PA6-CF20 @Anycubic Kobra S1.json"
+		},
 		{
 			"name": "Generic PA @Anycubic",
 			"sub_path": "filament/Generic PA @Anycubic.json"
@@ -573,16 +641,56 @@
 			"sub_path": "filament/Generic PA-CF @Anycubic.json"
 		},
 		{
-			"name": "Fiberon PA6-CF20 @Anycubic Kobra S1",
-			"sub_path": "filament/Polymaker/Fiberon PA6-CF20 @Anycubic Kobra S1.json"
+			"name": "Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle.json"
 		},
 		{
 			"name": "Generic PC @Anycubic",
 			"sub_path": "filament/Generic PC @Anycubic.json"
 		},
 		{
-			"name": "Generic PETG @Anycubic",
-			"sub_path": "filament/Generic PETG @Anycubic.json"
+			"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
 		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
@@ -600,10 +708,46 @@
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Anycubic",
+			"sub_path": "filament/Generic PETG @Anycubic.json"
+		},
+		{
+			"name": "Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PETG @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json"
@@ -612,14 +756,6 @@
 			"name": "Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Generic PLA @Anycubic",
-			"sub_path": "filament/Generic PLA @Anycubic.json"
-		},
-		{
-			"name": "Generic PLA-CF @Anycubic",
-			"sub_path": "filament/Generic PLA-CF @Anycubic.json"
-		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json"
@@ -636,6 +772,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
@@ -652,6 +804,18 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle.json"
@@ -664,6 +828,18 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
@@ -676,10 +852,26 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json"
@@ -688,10 +880,30 @@
 			"name": "Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Generic PLA @Anycubic",
+			"sub_path": "filament/Generic PLA @Anycubic.json"
+		},
+		{
+			"name": "Generic PLA-CF @Anycubic",
+			"sub_path": "filament/Generic PLA-CF @Anycubic.json"
+		},
 		{
 			"name": "Panchroma PLA @Anycubic Kobra S1",
 			"sub_path": "filament/Polymaker/Panchroma PLA @Anycubic Kobra S1.json"
@@ -705,21 +917,53 @@
 			"sub_path": "filament/Polymaker/Polymaker PLA Pro Metallic @Anycubic Kobra S1.json"
 		},
 		{
-			"name": "Generic PVA @Anycubic",
-			"sub_path": "filament/Generic PVA @Anycubic.json"
+			"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.8 nozzle.json"
 		},
 		{
 			"name": "Anycubic PVA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PVA @Anycubic Kobra X 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic TPU @Anycubic",
-			"sub_path": "filament/Generic TPU @Anycubic.json"
+			"name": "Generic PVA @Anycubic",
+			"sub_path": "filament/Generic PVA @Anycubic.json"
 		},
 		{
 			"name": "Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle.json"
@@ -740,10 +984,26 @@
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Generic TPU @Anycubic",
+			"sub_path": "filament/Generic TPU @Anycubic.json"
+		},
 		{
 			"name": "Generic ABS @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json"
@@ -796,6 +1056,18 @@
 			"name": "Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json"
@@ -816,302 +1088,22 @@
 			"name": "Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Generic TPU @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json"
-		},
-    	{
-     		"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle",
-      		"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle",
-     		"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-    	{
-      		"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle",
-        	"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-      		"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
-     		"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle",
-     		"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-    	{
-        	"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle",
-        	"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-        	"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.4 nozzle",
-     		"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-    		"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-    		"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-    	{
-    		"name": "Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle",
-        	"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-      		"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-     		"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-    	{
-      		"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-      		"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-    		"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-    		"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-        	"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-        	"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-      		"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-      		"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.4 nozzle.json"
-       	},
-      	{
-        	"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-        {
-      		"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.4 nozzle",
-       		"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-        {
-       		"name": "Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
-       		"sub_path": "filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json"
-		},
-    	{
-      		"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
-    		"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
-    	},
-
-    	{
-      		"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle",
-      		"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle",
-       		"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle",
-    		"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-    	{
-     		"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle",
-     		"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json"
-    	},
-
-       	{
-     		"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle",
-      		"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle",
-      		"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.6 nozzle",
-      		"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.6 nozzle.json"
-		},
-    	{
-    		"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-     		"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-    		"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-        {
-    		"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle",
-     		"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-		{
-     		"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-      		"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-    	{
-       		"name": "Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.6 nozzle",
-       		"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.6 nozzle",
-      		"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.6 nozzle.json"
-    	},
-
-    	{
-       		"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle",
-      		"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle.json"
-	},
-    	{
-    		"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-     	{
-       		"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-    	{
-      		"name": "Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "filament/Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-     	},
-    	{
-    		"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-      		"name": "Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-     		"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-    	{
-      		"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-    		"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-    	{
-     		"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-    	{
-     		"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-     		"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-        {
-       		"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PLA Silk @Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-       		"name": "Anycubic PLA+ @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 Max 0.8 nozzle.json"
-        },
-    	{
-       		"name": "Anycubic PLA-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic PLA-CF @Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
-    	{
-    		"name": "Anycubic PVA @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic PVA @Anycubic Kobra S1 Max 0.8 nozzle.json"
-     	},
-     	{
-     		"name": "Anycubic TPU 95A @Anycubic Kobra S1 Max 0.8 nozzle",
-    		"sub_path": "filament/Anycubic TPU 95A @Anycubic Kobra S1 Max 0.8 nozzle.json"
-      	},
-     	{
-     		"name": "Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.8 nozzle",
-     		"sub_path": "filament/Anycubic TPU for ACE @Anycubic Kobra S1 Max 0.8 nozzle.json"
-     	}
-
+		}
 	],
 	"machine_list": [
 		{
@@ -1198,22 +1190,22 @@
 			"name": "Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra S1 0.4 nozzle.json"
 		},
-        {
-            "name": "Anycubic Kobra S1 Max 0.4 nozzle",
-            "sub_path": "machine/Anycubic Kobra S1 Max 0.4 nozzle.json"
-        },
-        {
-    		"name": "Anycubic Kobra S1 Max 0.25 nozzle",
-    		"sub_path": "machine/Anycubic Kobra S1 Max 0.25 nozzle.json"
-        },
-     	{
-    		"name": "Anycubic Kobra S1 Max 0.6 nozzle",
-    		"sub_path": "machine/Anycubic Kobra S1 Max 0.6 nozzle.json"
-        },
-    	{
-    		"name": "Anycubic Kobra S1 Max 0.8 nozzle",
-       		"sub_path": "machine/Anycubic Kobra S1 Max 0.8 nozzle.json"
-    	},
+		{
+			"name": "Anycubic Kobra S1 Max 0.25 nozzle",
+			"sub_path": "machine/Anycubic Kobra S1 Max 0.25 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra S1 Max 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra S1 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra S1 Max 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra S1 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra S1 Max 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra X 0.4 nozzle.json"
diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json
index 99d8da0f4b..884c07a791 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json
index 95d5884132..1a67149acc 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json
index 3a6e2c9073..644fbe9f06 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json
index f49664c14b..4aaf07851e 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json
index 790d365ee5..2356b2b46f 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json
index 05d943ece7..6e4a5981cf 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"ASA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json
index 2a43e7b355..44aecae10a 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"ASA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json
index 1b038f7ba0..a86f5cf27f 100644
--- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json
index 2d5c70f60b..61c9ae06bb 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PEBA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json
index 213ee1ce70..271c2cbd31 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json
index fbab6ab82c..ae2c4ea617 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json
index 5966ceb3dd..21a6dab470 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json
index 13c1aae54f..b170d4234f 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json
index 85edb1eca9..a1ea9ea067 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json
index 7fb1d1f66c..4852093cda 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -324,12 +324,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json
index 64ec8774b0..16d4b54568 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -318,12 +318,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json
index ea95c2b1c5..ebc7e8e514 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -324,12 +324,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json
index a2cd9ecc5e..978c51007e 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -324,12 +324,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json
index b0c543cebf..e2c6e84c1b 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json	
@@ -309,12 +309,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json
index bbe7575b49..0774881a2b 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -318,12 +318,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json
index d78fcc1d27..e3a405e192 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -324,12 +324,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json
index cc3e8a15fc..e28e2d859e 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -324,12 +324,6 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json
index 7faa84782c..3d41b19d51 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json
index 583473ed30..427d09ec0b 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json
index 8e531b88a4..fdbd1987cb 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json
index 01b3d45f23..c06ecd26e7 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json
index 2898403b36..8263451aa2 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json
index a4e34756ec..36149ebfcb 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json
index af7e374dc7..8de722c472 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json
index 5c8936316f..35173c7c21 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json
index 504a4b382c..3c612d7aca 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json
index df464f2fa9..2a33fab35f 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json
index 4e60bf4527..e08e57acf0 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json
index 80c120870e..7c49813853 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json
index 43ec857824..bb8d9f2424 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json
index 9cb1eef59f..ee4ba7f373 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json
index 5b069135b3..4a8f9c4fff 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json
index eb59d710e0..18baed2def 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json
index 9b37a8911c..dab5df7d46 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json
index 03ea837c0c..50ab8dc649 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json
index 474deb3deb..c0b72e9dc8 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json
index 7dad057149..ddd4e1d96c 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json
index d7832ced4c..655ce81b7c 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json
index 9aebb3860e..48fa611ab1 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json
index 166e46e620..89813c64cc 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json
index 0ea21e81ed..ab7642a285 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json
index 59fd701496..9f28aa798a 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json	
@@ -111,9 +111,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -183,9 +180,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json
index a80ab1d88f..fd51691282 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json
index d31d75f532..a44bbfac9d 100644
--- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json
index 5141d90404..9831c55484 100644
--- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"TPU"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json
index d6b5217879..d38d83684b 100644
--- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"TPU"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json
index a5f6e735b0..5972bc0d37 100644
--- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"TPU"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json
index d17fd1217a..e1649e5b0b 100644
--- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json
index 988340c1eb..0f273afbef 100644
--- a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json
index e025d0587c..b44b6ecc11 100644
--- a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -318,12 +318,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json
index 78925acad9..0f238e5a5b 100644
--- a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json	
@@ -309,12 +309,6 @@
 	"slow_down_min_speed": [
 		"20"
 	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
 	"support_material_interface_fan_speed": [
 		"-1"
 	],
diff --git a/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json
index a81795f7c0..1a2368dcfd 100644
--- a/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -120,9 +120,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -204,9 +201,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json
index 369198b146..6b5dc78c98 100644
--- a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pet.json b/resources/profiles/Anycubic/filament/fdm_filament_pet.json
index 62af7c89ed..56671ade0d 100644
--- a/resources/profiles/Anycubic/filament/fdm_filament_pet.json
+++ b/resources/profiles/Anycubic/filament/fdm_filament_pet.json
@@ -25,6 +25,12 @@
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"slow_down_for_layer_cooling": [
 		"1"
 	],
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json
index 9497594f62..663294b14b 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json	
@@ -197,7 +197,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json
index f28ac191b3..c0d013f4ae 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Max_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Max_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Max 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @System;Generic TPU @System"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json
index f3d67776af..43e6d317ef 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -201,7 +201,6 @@
 		"100"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json
index 1cce9bddff..bbf71349cf 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json	
@@ -204,7 +204,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json
index 9db9eec174..30b4b2c084 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Plus_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Plus_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Plus 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Plus 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @System;Generic TPU @System"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json
index 690f77a01c..64e1da1fb9 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -202,7 +202,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json
index 87a629fea2..e278a2357f 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Pro_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Pro_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Pro 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Pro 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @System;Generic TPU @System"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json
index cbd4a67cfb..0543b1818f 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json	
@@ -208,7 +208,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json
index 624233053e..e3cc91d26b 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json	
@@ -210,7 +210,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json
index d613138128..ec4e3ef986 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json	
@@ -208,7 +208,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json
index 60b3864454..4e67d80ac1 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json	
@@ -208,7 +208,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json
index dbb112bfae..ed52a91b21 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -20,15 +20,15 @@
 		"Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle",
-		"Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
-		"Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic PLA @Anycubic",
+		"Generic PLA Silk @System",
 		"Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle",
-		"Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
-		"Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
-		"Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
+		"Generic ABS @Anycubic",
+		"Generic PETG @Anycubic",
+		"Generic TPU @Anycubic"
 	],
 	"disable_m73": "0",
 	"gcode_flavor": "klipper",
@@ -252,7 +252,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "1",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json
index 272d19cd75..811abb2d5f 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -222,7 +222,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "1",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json
index 993258d59b..41c5a6c2a3 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -225,7 +225,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "1",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json
index 03047b45ea..990c65bae9 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "Anycubic Kobra 3 Max_buildplate_texture.svg",
 	"default_bed_type": "Textured PEI Plate",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic;Generic PLA Silk @System;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic;Generic PETG @Anycubic;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json
index b33c096a26..f87f47ad68 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 3_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 3_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json
index 41b6e7b3e1..fc99bbd49f 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json	
@@ -201,7 +201,6 @@
 		"100"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json
index 25a16805e1..d940eeb745 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra Neo_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra Neo_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Anycubic"
+	"default_materials": "Generic PLA @Anycubic;Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json
index 9ca15821da..94d82b7c27 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json	
@@ -201,7 +201,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json
index 7e6195aca7..8786b75afa 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,252 +1,251 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "Puudpg2z8v7I6IQA",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra S1 Max 0.25 nozzle",
-	"printer_model": "Anycubic Kobra S1 Max",
-	"printer_variant": "0.25",
-	"nozzle_diameter": [
-		"0.25"
-	],
-	"default_print_profile": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "350",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "1",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"0"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "340",
-	"extruder_clearance_height_to_rod": "30",
-	"extruder_clearance_radius": "55",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"400",
-		"400",
-		"400"
-	],
-	"machine_max_jerk_e": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_jerk_x": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_y": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_z": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_speed_e": [
-		"80",
-		"40",
-		"104"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"10",
-		"5",
-		"13"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.18"
-	],
-	"min_layer_height": [
-		"0.05"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "corexy",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"348"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.4"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "1",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Slope Lift"
-	],
-	"z_offset": "0"
-}
+{
+	"type": "machine",
+	"name": "Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "Puudpg2z8v7I6IQA",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra S1 Max 0.25 nozzle",
+	"printer_model": "Anycubic Kobra S1 Max",
+	"printer_variant": "0.25",
+	"nozzle_diameter": [
+		"0.25"
+	],
+	"default_print_profile": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "350",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "340",
+	"extruder_clearance_height_to_rod": "30",
+	"extruder_clearance_radius": "55",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"400",
+		"400",
+		"400"
+	],
+	"machine_max_jerk_e": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_speed_e": [
+		"80",
+		"40",
+		"104"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"5",
+		"13"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.18"
+	],
+	"min_layer_height": [
+		"0.05"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "corexy",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"348"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json
index 482534d2de..f0ba840124 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,252 +1,251 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "gI3IJRLKNc1fyiO6",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra S1 Max 0.4 nozzle",
-	"printer_model": "Anycubic Kobra S1 Max",
-	"printer_variant": "0.4",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"default_print_profile": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "350",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "1",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"0"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "340",
-	"extruder_clearance_height_to_rod": "30",
-	"extruder_clearance_radius": "55",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"400",
-		"400",
-		"400"
-	],
-	"machine_max_jerk_e": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_jerk_x": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_y": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_z": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_speed_e": [
-		"80",
-		"40",
-		"104"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"10",
-		"5",
-		"13"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "corexy",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"348"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.4"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "1",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Slope Lift"
-	],
-	"z_offset": "0"
-}
+{
+	"type": "machine",
+	"name": "Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "gI3IJRLKNc1fyiO6",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra S1 Max 0.4 nozzle",
+	"printer_model": "Anycubic Kobra S1 Max",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "350",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "340",
+	"extruder_clearance_height_to_rod": "30",
+	"extruder_clearance_radius": "55",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"400",
+		"400",
+		"400"
+	],
+	"machine_max_jerk_e": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_speed_e": [
+		"80",
+		"40",
+		"104"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"5",
+		"13"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "corexy",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"348"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json
index 0feeec8104..604d488bdb 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,252 +1,251 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "p7ilBBLpGn5OYr2e",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra S1 Max 0.6 nozzle",
-	"printer_model": "Anycubic Kobra S1 Max",
-	"printer_variant": "0.6",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"default_print_profile": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "350",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "1",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"0"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "340",
-	"extruder_clearance_height_to_rod": "30",
-	"extruder_clearance_radius": "55",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"400",
-		"400",
-		"400"
-	],
-	"machine_max_jerk_e": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_jerk_x": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_y": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_z": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_speed_e": [
-		"80",
-		"40",
-		"104"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"10",
-		"5",
-		"13"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.42"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "corexy",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"348"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.4"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "1",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Slope Lift"
-	],
-	"z_offset": "0"
-}
+{
+	"type": "machine",
+	"name": "Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "p7ilBBLpGn5OYr2e",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra S1 Max 0.6 nozzle",
+	"printer_model": "Anycubic Kobra S1 Max",
+	"printer_variant": "0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_print_profile": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "350",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "340",
+	"extruder_clearance_height_to_rod": "30",
+	"extruder_clearance_radius": "55",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"400",
+		"400",
+		"400"
+	],
+	"machine_max_jerk_e": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_speed_e": [
+		"80",
+		"40",
+		"104"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"5",
+		"13"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.42"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "corexy",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"348"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json
index 172c30885e..d51a6fc560 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,252 +1,251 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "eD3ZKZ62sl6JMvUr",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra S1 Max 0.8 nozzle",
-	"printer_model": "Anycubic Kobra S1 Max",
-	"printer_variant": "0.8",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"default_print_profile": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "350",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "1",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"0"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "340",
-	"extruder_clearance_height_to_rod": "30",
-	"extruder_clearance_radius": "55",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"400",
-		"400",
-		"400"
-	],
-	"machine_max_jerk_e": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_jerk_x": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_y": [
-		"15",
-		"15",
-		"15"
-	],
-	"machine_max_jerk_z": [
-		"1",
-		"1",
-		"1"
-	],
-	"machine_max_speed_e": [
-		"80",
-		"40",
-		"104"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"10",
-		"5",
-		"13"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.56"
-	],
-	"min_layer_height": [
-		"0.16"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "corexy",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"348"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.4"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "1",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "0",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Slope Lift"
-	],
-	"z_offset": "0"
-}
+{
+	"type": "machine",
+	"name": "Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "eD3ZKZ62sl6JMvUr",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra S1 Max 0.8 nozzle",
+	"printer_model": "Anycubic Kobra S1 Max",
+	"printer_variant": "0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_print_profile": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "350",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "340",
+	"extruder_clearance_height_to_rod": "30",
+	"extruder_clearance_radius": "55",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"400",
+		"400",
+		"400"
+	],
+	"machine_max_jerk_e": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"1",
+		"1",
+		"1"
+	],
+	"machine_max_speed_e": [
+		"80",
+		"40",
+		"104"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"5",
+		"13"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.56"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "corexy",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"348"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json
index c47f2e7fa2..0f35afd33f 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json	
@@ -1,12 +1,12 @@
-{
-    "type": "machine_model",
-    "machine_tech": "FFF",
-    "family": "Anycubic",
-    "name": "Anycubic Kobra S1 Max",
-    "model_id": "Anycubic Kobra S1 Max",
-    "nozzle_diameter": "0.4;0.25;0.6;0.8",
-    "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl",
-    "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg",
-    "hotend_model": "",
-    "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle"
-}
+{
+    "type": "machine_model",
+    "machine_tech": "FFF",
+    "family": "Anycubic",
+    "name": "Anycubic Kobra S1 Max",
+    "model_id": "Anycubic Kobra S1 Max",
+    "nozzle_diameter": "0.4;0.25;0.6;0.8",
+    "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl",
+    "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle"
+}
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json
index 07b3b61536..45a7404183 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra S1_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra S1_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle"
 }
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json
index 5dc35e5584..8e2952b123 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json	
@@ -14,7 +14,19 @@
 	],
 	"default_print_profile": "0.20mm Standard @Anycubic Kobra X 0.4 nozzle;0.08mm Standard @Anycubic Kobra X 0.4 nozzle",
 	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra X 0.4 nozzle;Anycubic ABS @Anycubic Kobra X 0.4 nozzle;Anycubic ASA @Anycubic Kobra X 0.4 nozzle;Anycubic PETG @Anycubic Kobra X 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle;Anycubic PVA @Anycubic Kobra X 0.4 nozzle;Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle;Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle;Anycubic Generetic PETG @Anycubic Kobra X 0.4 nozzle"
+		"Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic ABS @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic ASA @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PETG @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic PVA @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle",
+		"Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle",
+		"Generic PETG @Anycubic Kobra X 0.4 nozzle"
 	],
 	"disable_m73": "0",
 	"gcode_flavor": "klipper",
@@ -188,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "1",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Predator.json b/resources/profiles/Anycubic/machine/Anycubic Predator.json
index a3b100c166..b4490d79f9 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Predator.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Predator.json	
@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Predator_buildplate_model.stl",
 	"bed_texture": "Anycubic Predator_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Anycubic;Generic PLA @Anycubic;Generic PLA-CF @Anycubic;Generic PETG @Anycubic;Generic TPU @Anycubic;Generic ASA @Anycubic;Generic PC @Anycubic;Generic PVA @Anycubic;Generic PA @Anycubic;Generic PA-CF @Anycubic"
+	"default_materials": "Generic ABS @Anycubic;Generic PLA @Anycubic;Generic PLA-CF @Anycubic;Generic PETG @Anycubic;Generic TPU @Anycubic;Generic ASA @Anycubic;Generic PC @Anycubic;Generic PVA @Anycubic;Generic PA @Anycubic;Generic PA-CF @Anycubic;Generic PLA @System"
 }
diff --git a/resources/profiles/Anycubic/machine/fdm_machine_common.json b/resources/profiles/Anycubic/machine/fdm_machine_common.json
index c4ff46a6bf..ac44b6a964 100644
--- a/resources/profiles/Anycubic/machine/fdm_machine_common.json
+++ b/resources/profiles/Anycubic/machine/fdm_machine_common.json
@@ -126,7 +126,6 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
diff --git a/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json
index 6ba2afe3b3..80fd42d391 100644
--- a/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "bZRQrVuJgsKO0PYK",
-	"instantiation": "true",
-	"print_settings_id": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"layer_height": "0.06",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "50",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.3",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.15",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.3",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "2000",
-	"internal_solid_infill_line_width": "0.27",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.27",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.27",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.3",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.06",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.27",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.06",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.27",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "bZRQrVuJgsKO0PYK",
+	"instantiation": "true",
+	"print_settings_id": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"layer_height": "0.06",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "50",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.3",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.15",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.3",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "2000",
+	"internal_solid_infill_line_width": "0.27",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.27",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.27",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.3",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.06",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.27",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.06",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.27",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json
index 54a0df5369..5670e7a135 100644
--- a/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "7",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index a4a88b3149..6c8575201a 100644
--- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json
index 5626bb449c..7b045f6b74 100644
--- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "bfq9DtBsHIrbsZfD",
-	"instantiation": "true",
-	"print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"layer_height": "0.08",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "50",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.3",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.15",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.3",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "2000",
-	"internal_solid_infill_line_width": "0.27",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.27",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.27",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.3",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.08",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.27",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.08",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.27",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "bfq9DtBsHIrbsZfD",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"layer_height": "0.08",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "50",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.3",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.15",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.3",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "2000",
+	"internal_solid_infill_line_width": "0.27",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.27",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.27",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.3",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.08",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.27",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.08",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.27",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index e49ba929c0..386505ff8e 100644
--- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "E2tI71ShF3oOgMME",
-	"instantiation": "true",
-	"print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.08",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "7",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "80",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "120",
-	"ironing_angle": "-1",
-	"ironing_flow": "8%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.08",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "15",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.08",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "9",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "E2tI71ShF3oOgMME",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.08",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "80",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "8%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.08",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "15",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.08",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "9",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json
index 2b02de44b3..ec1137ad11 100644
--- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json
index 1e8c4a2c90..b508189668 100644
--- a/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "5",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json
index 14fe54d530..58a70cf403 100644
--- a/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "OmytVExIkdNyyyKT",
-	"instantiation": "true",
-	"print_settings_id": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"layer_height": "0.1",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "50",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.3",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.15",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.3",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "2000",
-	"internal_solid_infill_line_width": "0.27",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.27",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.27",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.3",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.1",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.27",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.1",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.27",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "OmytVExIkdNyyyKT",
+	"instantiation": "true",
+	"print_settings_id": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"layer_height": "0.1",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "50",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.3",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.15",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.3",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "2000",
+	"internal_solid_infill_line_width": "0.27",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.27",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.27",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.3",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.1",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.27",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.1",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.27",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json
index 6fd6f1ace7..95a383016b 100644
--- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json
index a33932e016..d6f37a93c0 100644
--- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "5",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json
index c8d7c6f284..39acfedd36 100644
--- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json
index 0a67e8371a..1ffa05956a 100644
--- a/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index 38fd80bfae..7bd3131f87 100644
--- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json
index b20feba94a..f01d005bf4 100644
--- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "z8TDucaoilYiK8V1",
-	"instantiation": "true",
-	"print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"layer_height": "0.12",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "50",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.3",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.15",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.3",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "2000",
-	"internal_solid_infill_line_width": "0.27",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.27",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.27",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.3",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.12",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.27",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.12",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.27",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "z8TDucaoilYiK8V1",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"layer_height": "0.12",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "50",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.3",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.15",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.3",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "2000",
+	"internal_solid_infill_line_width": "0.27",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.27",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.27",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.3",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.12",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.27",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.12",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.27",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index 99957845b8..33fcd005e4 100644
--- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "D1bJFkXoVSZ2QLSA",
-	"instantiation": "true",
-	"print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.12",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "180",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "180",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "180",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.12",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "20",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.12",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "D1bJFkXoVSZ2QLSA",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.12",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "180",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "180",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "180",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.12",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "20",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.12",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
index 29dd4e03f9..73acca4322 100644
--- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json
index b31c2c5af4..15b3b89ad7 100644
--- a/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "Hl64YdObrtpqJM2s",
-	"instantiation": "true",
-	"print_settings_id": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
-	"layer_height": "0.14",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "50",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.3",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.15",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.3",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "2000",
-	"internal_solid_infill_line_width": "0.27",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.27",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.27",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.3",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.14",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.27",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.14",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.27",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Hl64YdObrtpqJM2s",
+	"instantiation": "true",
+	"print_settings_id": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
+	"layer_height": "0.14",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "50",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.3",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.15",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.3",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "2000",
+	"internal_solid_infill_line_width": "0.27",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.27",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.27",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.3",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.14",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.27",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.14",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.27",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
index 35c1d4b30a..be2f8b3e9a 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "2Qq27PfeoCqMAZKw",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
index ff48fca663..0facf331d1 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fcqsKbEsGbAs6rUU",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json
index e74fae9dad..ae5f046053 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "E1VHkuwE0sHTzmb2",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
index 3618dac281..84b0eb87fe 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7H2BzvHgy0o9nc1g",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
index a14a4961dd..8b6af27046 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ukTEpT2XRtJyGKUp",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json
index e974680931..27c3ca627f 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "3Gu40CNOXnzDsZfD",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
index 0da034eeb7..0cfc8e7463 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ln2Zw2E5e3Azq3nc",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
index b4647a7c39..15a208302e 100644
--- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json	
+++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "zKGotAmWJTB14cT8",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json
index 04c0b4d8e5..e8180a0034 100644
--- a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "Hiz2L1qh67izjl1e",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.16",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "200",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "200",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.16",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "25",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.16",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "6",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Hiz2L1qh67izjl1e",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.16",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "200",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.16",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "25",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.16",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json
index 055dc89ed1..d195a61226 100644
--- a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json
index 13f0e7e127..283d8c72b4 100644
--- a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json
index 469c3c4ba3..8d8e8222e5 100644
--- a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json
index aab5a3f23c..e4d3bc3a19 100644
--- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index 09ff8e393c..02f7fccb93 100644
--- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json
index 4b83264a1d..596f35c405 100644
--- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index edf43e2875..eeee68080f 100644
--- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "Yl10d32pjposFVu9",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.16",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "300",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "250",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "200",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "350",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.16",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "25",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.16",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "6",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Yl10d32pjposFVu9",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.16",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "300",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "250",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "350",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.16",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "25",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.16",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json
index 664f118e3d..0b682648d7 100644
--- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json
index ac80f014ab..f6c96e3155 100644
--- a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json
index 4b2fd1df30..bcd1decabe 100644
--- a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "Y55zuAyFSNMHZlCt",
-	"instantiation": "true",
-	"print_settings_id": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"layer_height": "0.18",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.18",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.62",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.18",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "5000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Y55zuAyFSNMHZlCt",
+	"instantiation": "true",
+	"print_settings_id": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"layer_height": "0.18",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.18",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.18",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json
index f276232436..2f639acd63 100644
--- a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "M7CigEUqzwefI8ed",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.2",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "250",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "250",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "5",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0.05"
-}
+{
+	"type": "process",
+	"name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "M7CigEUqzwefI8ed",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.2",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "250",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "250",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.05"
+}
diff --git a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json
index 75fb6457ea..425e43b467 100644
--- a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
index f0e718b0ff..d446d567b7 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "4fNa2Y66ms9j0vdh",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
index b92ce992ca..6f1b6475cf 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "4tYPv79lny7OAesb",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json
index 0e65291255..4180755994 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json
index dc555a5838..ca551062d5 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json
index 863a0a0af9..747646cb59 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json
index 96fa4642c9..7476d37ea1 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json
index 5573902ecf..8e94d72687 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index 58b0b90e5e..827ef63836 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json
index b1af0fb13d..48307606ae 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json
index 0626025cc4..8c1a97ff5e 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json
index 6a02522e0e..f345acb65d 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json	
@@ -127,8 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "1",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index 4a00460633..2fef8f1bb5 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "h9txQrwg5GiCgORR",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.2",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "300",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "250",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "200",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "300",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "5",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0.05"
-}
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "h9txQrwg5GiCgORR",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.2",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "300",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "250",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "300",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.05"
+}
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json
index cbe349b771..3afbbb25f8 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json
index c9d3e750a3..393233a992 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "PCsMHJ36HdywhVBA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
index b68731cb78..c0a529e50c 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dd3a8DNtunKVpWWY",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
index 77e3b32b80..b1a00dda27 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pqXeGE9OxboQGBMi",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json
index 326db3295d..365a863cb5 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ZnZf41QpEAXorp2U",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
index 341ece7bef..e6e5f5ab8a 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jvz2LYWpcGJVgzZn",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
index d0eb582143..d6ffbab4a9 100644
--- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json	
+++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lI7dHvKmsEmoSw1k",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json
index 2ac098d8a7..48a7d490b4 100644
--- a/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index 587aaecfe8..63324007cc 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json
index 548f9050fc..fdebb701a7 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json
index aef03dc9b2..a367b48df4 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index 28aeb2a4a6..338d36d1ac 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "NDu3QAQvTHNboRRR",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.24",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "230",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "230",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "230",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "200",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "35",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "230",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "35",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "NDu3QAQvTHNboRRR",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.24",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "230",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "230",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "230",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "230",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "35",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json
index de6d9f4c09..4363919787 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "ehgM1Fri1VLP8d2m",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"layer_height": "0.24",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.62",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "5000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "ehgM1Fri1VLP8d2m",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"layer_height": "0.24",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json
index 8d42e7ab86..48b693bb69 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "9oyIahCs4Md5T140",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"layer_height": "0.24",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "0",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "5",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "50",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.82",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "9oyIahCs4Md5T140",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"layer_height": "0.24",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "0",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "50",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json
index e4ca7f3027..33f4c80798 100644
--- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json
index dcb8ee9848..f314b9f3b4 100644
--- a/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json
index a256d2e635..893f1af1e3 100644
--- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json
index 5deb25af55..255b805b88 100644
--- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -136,8 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -198,7 +195,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json
index 7b19ca18ba..108a9202ab 100644
--- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0.6",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json
index 213c1bd438..e4839e61bb 100644
--- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json	
@@ -1,320 +1,317 @@
-{
-	"type": "process",
-	"name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "P21QEQqy7DYRu61b",
-	"instantiation": "true",
-	"print_settings_id": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
-	"layer_height": "0.28",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "200",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "100",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "50",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "200",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "50%",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "200",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "200",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "35",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "200",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "150",
-	"support_style": "default",
-	"support_threshold_angle": "40",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "P21QEQqy7DYRu61b",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
+	"layer_height": "0.28",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "50",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "50%",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "200",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "150",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json
index debbe6e0cf..d22e3ef4f4 100644
--- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json
index fa16040b96..46dd14c923 100644
--- a/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "0%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
index 974306bcd2..0b3e4b84c8 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "SnMGK6A5jGzj9KAm",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
index 0fd1a8efeb..d4d629ba75 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "B0Ar6gbysEbWId84",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json
index 3ec6a42418..505c1f10b6 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jzWHjr9rKzgX2mbz",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
index 18456d7b99..9193fc6aaa 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "IWsii200XlEuhz3n",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
index bb3ddf9389..0535084c51 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "IB9gk84SYRkMza9u",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json
index 4190064c90..33f3822993 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lSoaR17JUQSesbgG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
index e72286dd06..a21298d85c 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pXawQlRvbdiJJANG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
index 70bb8ad91e..d1a4fc798a 100644
--- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7PNQ3S9tucM5wFyj",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json
index 03ed5252c7..2b4da65c06 100644
--- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json
index 4820247cd2..c76f636af6 100644
--- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json
index 1c8042a175..02a1b0466f 100644
--- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "O8vKonzzc8WA5pYY",
-	"instantiation": "true",
-	"print_settings_id": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"layer_height": "0.3",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.62",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "0",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "O8vKonzzc8WA5pYY",
+	"instantiation": "true",
+	"print_settings_id": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"layer_height": "0.3",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json
index 745f784736..0faa168582 100644
--- a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json
index 10b86fe268..34542cfb19 100644
--- a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "0bCUIOLe0kqiwAIZ",
-	"instantiation": "true",
-	"print_settings_id": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"layer_height": "0.32",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "5",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "50",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.82",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "0bCUIOLe0kqiwAIZ",
+	"instantiation": "true",
+	"print_settings_id": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"layer_height": "0.32",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "50",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json
index 93ff4febe6..62bce8d582 100644
--- a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json
index 66eb279711..81d042d0e8 100644
--- a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "ii1Ycsf3xI93uZy9",
-	"instantiation": "true",
-	"print_settings_id": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"layer_height": "0.36",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.62",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "5000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "ii1Ycsf3xI93uZy9",
+	"instantiation": "true",
+	"print_settings_id": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"layer_height": "0.36",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json
index 1130f63061..b29ffd16ef 100644
--- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json	
@@ -13,7 +13,6 @@
 	],
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "1",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -128,7 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json
index fadd6675d3..0002ce4d9b 100644
--- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json
index 1085832db4..0c68a35165 100644
--- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "O5xBpGApHGyVlyLw",
-	"instantiation": "true",
-	"print_settings_id": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"layer_height": "0.4",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "0",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "120",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "5",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "50",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.82",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "O5xBpGApHGyVlyLw",
+	"instantiation": "true",
+	"print_settings_id": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"layer_height": "0.4",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "50",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json
index 12b7ec1ebf..f890e66ae7 100644
--- a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json
index f11acb406f..7233849603 100644
--- a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "rPalfYXk0fCx0yjv",
-	"instantiation": "true",
-	"print_settings_id": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
-	"layer_height": "0.42",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.1",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "60",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "40",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.62",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "5000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "rPalfYXk0fCx0yjv",
+	"instantiation": "true",
+	"print_settings_id": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
+	"layer_height": "0.42",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "60",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json
index 98b75e6a31..4ae39e9b01 100644
--- a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json	
@@ -146,8 +146,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
@@ -209,7 +207,6 @@
 	],
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "40",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_direction": "45",
 	"internal_solid_filament_id": "0",
diff --git a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json
index 88705184ec..34cd6518ab 100644
--- a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "y0r7Q7PMNRH8ujFF",
-	"instantiation": "true",
-	"print_settings_id": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"layer_height": "0.48",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "0",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "5",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "50",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.82",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "y0r7Q7PMNRH8ujFF",
+	"instantiation": "true",
+	"print_settings_id": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"layer_height": "0.48",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "0",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "50",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json
index 84ab9fa483..bdd7741e0b 100644
--- a/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json	
@@ -1,323 +1,320 @@
-{
-	"type": "process",
-	"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "rOL0gJh6Y7pDsBnk",
-	"instantiation": "true",
-	"print_settings_id": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
-	"layer_height": "0.56",
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_extra_bridge_layer": "disabled",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"extrusion_rate_smoothing_external_perimeter_only": "0",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_noise_type": "classic",
-	"fuzzy_skin_octaves": "4",
-	"fuzzy_skin_persistence": "0.5",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_scale": "1",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400%",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_combination_max_layer_height": "100%",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "5000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"interlocking_beam": "0",
-	"interlocking_beam_layer_count": "2",
-	"interlocking_beam_width": "0.8",
-	"interlocking_boundary_avoidance": "2",
-	"interlocking_depth": "2",
-	"interlocking_orientation": "22.5",
-	"internal_bridge_angle": "0",
-	"internal_bridge_density": "100%",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_inset": "0",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"lattice_angle_1": "-45",
-	"lattice_angle_2": "45",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_skirt_length": "0",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "0",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "5",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"preheat_steps": "1",
-	"preheat_time": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_extra_rib_length": "0",
-	"prime_tower_fillet_wall": "1",
-	"prime_tower_flat_ironing": "0",
-	"prime_tower_infill_gap": "150%",
-	"prime_tower_max_speed": "90",
-	"prime_tower_rib_wall": "1",
-	"prime_tower_rib_width": "8",
-	"prime_tower_skip_points": "1",
-	"prime_tower_width": "30",
-	"prime_volume": "30",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"single_loop_draft_shield": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"skirt_start_angle": "-135",
-	"skirt_type": "combined",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "0",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "80",
-	"smooth_speed_discontinuity_area": "1",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "100",
-	"spiral_finishing_flow_ratio": "0",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"spiral_starting_flow_ratio": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "-5",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "2",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "50",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.82",
-	"support_object_first_layer_gap": "0.2",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_threshold_overlap": "50%",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "1",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "300",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "45",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "2",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_extra_flow": "100%",
-	"wipe_tower_filament": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}
+{
+	"type": "process",
+	"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "rOL0gJh6Y7pDsBnk",
+	"instantiation": "true",
+	"print_settings_id": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
+	"layer_height": "0.56",
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "0",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_extra_rib_length": "0",
+	"prime_tower_fillet_wall": "1",
+	"prime_tower_flat_ironing": "0",
+	"prime_tower_infill_gap": "150%",
+	"prime_tower_max_speed": "90",
+	"prime_tower_rib_wall": "1",
+	"prime_tower_rib_width": "8",
+	"prime_tower_skip_points": "1",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "2",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "50",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Anycubic/process/fdm_process_common.json b/resources/profiles/Anycubic/process/fdm_process_common.json
index 868bbc1a2e..f813b8fa7f 100644
--- a/resources/profiles/Anycubic/process/fdm_process_common.json
+++ b/resources/profiles/Anycubic/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -78,7 +77,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_surface_line_width": "0.4",
diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json
index 66a3a05247..180622cf3a 100644
--- a/resources/profiles/Artillery.json
+++ b/resources/profiles/Artillery.json
@@ -1,6 +1,6 @@
 {
 	"name": "Artillery",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Artillery configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json
index e5617c4fe6..f168beb458 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json	
@@ -439,7 +439,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json
index a265906570..626b3d23ab 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json	
@@ -199,7 +199,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json
index 85be2e70be..c052fb721f 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json	
@@ -439,7 +439,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json
index db91e5320b..1a0d950914 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json	
@@ -439,7 +439,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro.json b/resources/profiles/Artillery/machine/Artillery M1 Pro.json
index b7e4c1baaa..9b1e63a89d 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro.json	
@@ -10,5 +10,5 @@
 	"hotend_model": "",
 	"default_bed_type": "Textured PEI Plate",
 	"not_support_bed_type": "Engineering Plate;Textured Cool Plate;Smooth PEI Plate",
-	"default_materials": "Artillery PLA Basic;Artillery ABS;Artillery ASA;Artillery PA;Artillery PA-CF;Artillery PC;Artillery PET;Artillery PETG Basic;Artillery PETG-CF;Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA-CF;Artillery PVA;Artillery TPU;Artillery PLA"
+	"default_materials": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle;Artillery ABS @Artillery M1 Pro 0.4 nozzle;Artillery ASA @Artillery M1 Pro 0.4 nozzle;Artillery PA @Artillery M1 Pro 0.4 nozzle;Artillery PA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PC @Artillery M1 Pro 0.4 nozzle;Artillery PET @Artillery M1 Pro 0.4 nozzle;Artillery PETG Basic @Artillery M1 Pro 0.4 nozzle;Artillery PETG-CF @Artillery M1 Pro 0.4 nozzle;Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle;Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle;Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PVA @Artillery M1 Pro 0.4 nozzle;Artillery TPU @Artillery M1 Pro 0.4 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle"
 }
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json
index 42e66ff875..98af67eaa7 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json	
@@ -196,7 +196,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json
index 3b12ce6ede..4a961d2113 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json	
@@ -196,7 +196,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json
index b9013a99bf..0e2d82e209 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json	
@@ -196,7 +196,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json
index 4642e015a1..2102a9e857 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json	
@@ -196,7 +196,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Artillery/machine/fdm_machine_common.json b/resources/profiles/Artillery/machine/fdm_machine_common.json
index fcf2e2670b..e5e5341b22 100644
--- a/resources/profiles/Artillery/machine/fdm_machine_common.json
+++ b/resources/profiles/Artillery/machine/fdm_machine_common.json
@@ -126,7 +126,6 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
diff --git a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json
index a1175a96f5..a336001bbe 100644
--- a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json	
@@ -137,7 +137,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json
index 929fafed81..17279f7852 100644
--- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json	
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json
index 5a53fa08fd..d2c323a468 100644
--- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json
index a7647a1f00..2f6d888558 100644
--- a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json	
@@ -135,7 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json
index b6f6ae5347..e5f12b7fb4 100644
--- a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
@@ -134,7 +134,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json
index 8112e2e609..6490399347 100644
--- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json	
+++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "lF4fXJjfALsU4vVF",
 	"name": "0.15mm Optimal @Artillery Genius Pro",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "lF4fXJjfALsU4vVF",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json
index 9a6cac5bec..7c54deaa45 100644
--- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json	
+++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "vo47lgntuWkTLKZb",
 	"name": "0.15mm Optimal @Artillery Genius",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "vo47lgntuWkTLKZb",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.15",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json
index 238359be48..b2a81b40fa 100644
--- a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json	
@@ -135,7 +135,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json
index 25d53a28f7..9617aac2c8 100644
--- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json	
+++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "XEpSP538KuWRSmGA",
 	"name": "0.16mm Optimal @Artillery Hornet",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "XEpSP538KuWRSmGA",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json
index a31ce771ad..adacdcf7fd 100644
--- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json	
@@ -138,7 +138,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json
index 06244e2d4a..355c6078d5 100644
--- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json	
+++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "3bBfTCC809w3YcXr",
 	"name": "0.16mm Optimal @Artillery X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "3bBfTCC809w3YcXr",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json
index 99516c7732..9a91eb82a4 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "CsTy51kncEm8X0yJ",
 	"name": "0.20mm Standard @Artillery Genius Pro",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "CsTy51kncEm8X0yJ",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json
index 0a36259661..6ef1ed280e 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "lzsTJzIBChXesgUG",
 	"name": "0.20mm Standard @Artillery Genius",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "lzsTJzIBChXesgUG",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json
index b8eecf1f0f..8c846f2996 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "i2UAXXKCEaBJmX5R",
 	"name": "0.20mm Standard @Artillery Hornet",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "i2UAXXKCEaBJmX5R",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json
index 3baeec4a3b..02851bc832 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json	
@@ -141,7 +141,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json
index fcb3b2fea1..a32ba399ff 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "A2tF591xYPxvYPYn",
 	"name": "0.20mm Standard @Artillery X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "A2tF591xYPxvYPYn",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json
index 815e9b00c0..bff0dadb1a 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Uuco1eKObqt1aypG",
 	"name": "0.20mm Standard @Artillery X2",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "Uuco1eKObqt1aypG",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json
index b13efe200b..4a18b18ad0 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json	
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json
index 264a3e5f15..472b2cdb30 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json	
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json
index 8bf69da267..0df8955ecd 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json	
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json
index 56f172e941..3462f3c7f3 100644
--- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json	
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json
index 837e4eb6a7..f74639343a 100644
--- a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json	
@@ -136,7 +136,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json
index 33893b53df..c01ebe2271 100644
--- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json	
+++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "vK3z8VB7eFi5wSEy",
 	"name": "0.24mm Draft @Artillery Hornet",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "vK3z8VB7eFi5wSEy",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json
index d175fb9f9d..6c3911a578 100644
--- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json	
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json
index 5f3c183e51..d6d80212ce 100644
--- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json	
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json
index 38a240bad5..4b2d68d114 100644
--- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json	
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json
index 6abc742265..fee39f4d0b 100644
--- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json	
+++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "pMfIpILEXxTfa574",
 	"name": "0.24mm Draft @Artillery X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "pMfIpILEXxTfa574",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json
index 500c492659..851b63d27d 100644
--- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json	
+++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "OGYrkEdpgzTfzZLw",
 	"name": "0.25mm Draft @Artillery Genius Pro",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "OGYrkEdpgzTfzZLw",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json
index f17fd83593..1489269c39 100644
--- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json	
+++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "UditC85gTRgxvpSp",
 	"name": "0.25mm Draft @Artillery Genius",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "1",
+	"from": "system",
+	"setting_id": "UditC85gTRgxvpSp",
+	"instantiation": "true",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json
index 6540876295..efee8340aa 100644
--- a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json	
@@ -136,7 +136,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Artillery/process/fdm_process_common.json b/resources/profiles/Artillery/process/fdm_process_common.json
index c74a84adbb..976ff7cf68 100644
--- a/resources/profiles/Artillery/process/fdm_process_common.json
+++ b/resources/profiles/Artillery/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -78,7 +77,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_surface_line_width": "0.4",
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 9641788cf7..7491f4064d 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.24",
+	"version": "02.01.00.28",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
@@ -251,6 +251,10 @@
 			"name": "0.08mm Extra Fine @BBL H2DP 0.2 nozzle",
 			"sub_path": "process/0.08mm Extra Fine @BBL H2DP 0.2 nozzle.json"
 		},
+		{
+			"name": "0.08mm High Quality @BBL H2C 0.2 nozzle",
+			"sub_path": "process/0.08mm High Quality @BBL H2C 0.2 nozzle.json"
+		},
 		{
 			"name": "0.08mm High Quality @BBL X2D 0.2 nozzle",
 			"sub_path": "process/0.08mm High Quality @BBL X2D 0.2 nozzle.json"
@@ -263,10 +267,18 @@
 			"name": "0.08mm Extra Fine @BBL H2DP",
 			"sub_path": "process/0.08mm Extra Fine @BBL H2DP.json"
 		},
+		{
+			"name": "0.08mm High Quality @BBL H2C",
+			"sub_path": "process/0.08mm High Quality @BBL H2C.json"
+		},
 		{
 			"name": "0.08mm High Quality @BBL X2D",
 			"sub_path": "process/0.08mm High Quality @BBL X2D.json"
 		},
+		{
+			"name": "0.10mm Standard @BBL H2C 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @BBL H2C 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @BBL H2D 0.2 nozzle",
 			"sub_path": "process/0.10mm Standard @BBL H2D 0.2 nozzle.json"
@@ -279,6 +291,10 @@
 			"name": "0.10mm Standard @BBL X2D 0.2 nozzle",
 			"sub_path": "process/0.10mm Standard @BBL X2D 0.2 nozzle.json"
 		},
+		{
+			"name": "0.12mm Balanced Quality @BBL H2C 0.2 nozzle",
+			"sub_path": "process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json"
+		},
 		{
 			"name": "0.12mm Balanced Quality @BBL H2D 0.2 nozzle",
 			"sub_path": "process/0.12mm Balanced Quality @BBL H2D 0.2 nozzle.json"
@@ -299,6 +315,10 @@
 			"name": "0.12mm Fine @BBL H2DP",
 			"sub_path": "process/0.12mm Fine @BBL H2DP.json"
 		},
+		{
+			"name": "0.12mm High Quality @BBL H2C",
+			"sub_path": "process/0.12mm High Quality @BBL H2C.json"
+		},
 		{
 			"name": "0.12mm High Quality @BBL X2D",
 			"sub_path": "process/0.12mm High Quality @BBL X2D.json"
@@ -311,10 +331,18 @@
 			"name": "0.16mm Balanced Quality @BBL H2DP",
 			"sub_path": "process/0.16mm Balanced Quality @BBL H2DP.json"
 		},
+		{
+			"name": "0.16mm High Quality @BBL H2C",
+			"sub_path": "process/0.16mm High Quality @BBL H2C.json"
+		},
 		{
 			"name": "0.16mm High Quality @BBL X2D",
 			"sub_path": "process/0.16mm High Quality @BBL X2D.json"
 		},
+		{
+			"name": "0.16mm Standard @BBL H2C",
+			"sub_path": "process/0.16mm Standard @BBL H2C.json"
+		},
 		{
 			"name": "0.16mm Standard @BBL H2D",
 			"sub_path": "process/0.16mm Standard @BBL H2D.json"
@@ -327,6 +355,10 @@
 			"name": "0.16mm Standard @BBL X2D",
 			"sub_path": "process/0.16mm Standard @BBL X2D.json"
 		},
+		{
+			"name": "0.18mm Balanced Quality @BBL H2C 0.6 nozzle",
+			"sub_path": "process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json"
+		},
 		{
 			"name": "0.18mm Balanced Quality @BBL H2D 0.6 nozzle",
 			"sub_path": "process/0.18mm Balanced Quality @BBL H2D 0.6 nozzle.json"
@@ -347,10 +379,18 @@
 			"name": "0.20mm Balanced Strength @BBL H2DP",
 			"sub_path": "process/0.20mm Balanced Strength @BBL H2DP.json"
 		},
+		{
+			"name": "0.20mm High Quality @BBL H2C",
+			"sub_path": "process/0.20mm High Quality @BBL H2C.json"
+		},
 		{
 			"name": "0.20mm High Quality @BBL X2D",
 			"sub_path": "process/0.20mm High Quality @BBL X2D.json"
 		},
+		{
+			"name": "0.20mm Standard @BBL H2C",
+			"sub_path": "process/0.20mm Standard @BBL H2C.json"
+		},
 		{
 			"name": "0.20mm Standard @BBL H2D",
 			"sub_path": "process/0.20mm Standard @BBL H2D.json"
@@ -363,6 +403,10 @@
 			"name": "0.20mm Standard @BBL X2D",
 			"sub_path": "process/0.20mm Standard @BBL X2D.json"
 		},
+		{
+			"name": "0.24mm Standard @BBL H2C",
+			"sub_path": "process/0.24mm Standard @BBL H2C.json"
+		},
 		{
 			"name": "0.24mm Standard @BBL H2D",
 			"sub_path": "process/0.24mm Standard @BBL H2D.json"
@@ -379,6 +423,10 @@
 			"name": "0.24mm Balanced Quality @BBL X2D 0.6 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json"
 		},
+		{
+			"name": "0.24mm Balanced Strength @BBL H2C 0.6 nozzle",
+			"sub_path": "process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json"
+		},
 		{
 			"name": "0.24mm Balanced Strength @BBL H2D 0.6 nozzle",
 			"sub_path": "process/0.24mm Balanced Strength @BBL H2D 0.6 nozzle.json"
@@ -387,6 +435,10 @@
 			"name": "0.24mm Balanced Strength @BBL H2DP 0.6 nozzle",
 			"sub_path": "process/0.24mm Balanced Strength @BBL H2DP 0.6 nozzle.json"
 		},
+		{
+			"name": "0.24mm Balanced Quality @BBL H2C 0.8 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "0.24mm Balanced Quality @BBL H2D 0.8 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @BBL H2D 0.8 nozzle.json"
@@ -399,6 +451,10 @@
 			"name": "0.24mm Balanced Quality @BBL X2D 0.8 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @BBL H2C 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @BBL H2C 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @BBL H2D 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @BBL H2D 0.6 nozzle.json"
@@ -415,6 +471,10 @@
 			"name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle",
 			"sub_path": "process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json"
 		},
+		{
+			"name": "0.32mm Balanced Strength @BBL H2C 0.8 nozzle",
+			"sub_path": "process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "0.32mm Balanced Strength @BBL H2D 0.8 nozzle",
 			"sub_path": "process/0.32mm Balanced Strength @BBL H2D 0.8 nozzle.json"
@@ -423,6 +483,10 @@
 			"name": "0.32mm Balanced Strength @BBL H2DP 0.8 nozzle",
 			"sub_path": "process/0.32mm Balanced Strength @BBL H2DP 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @BBL H2C 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @BBL H2D 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @BBL H2D 0.8 nozzle.json"
@@ -491,6 +555,10 @@
 			"name": "0.08mm High Quality @BBL A1M",
 			"sub_path": "process/0.08mm High Quality @BBL A1M.json"
 		},
+		{
+			"name": "0.08mm High Quality @BBL A2L",
+			"sub_path": "process/0.08mm High Quality @BBL A2L.json"
+		},
 		{
 			"name": "0.08mm High Quality @BBL H2S",
 			"sub_path": "process/0.08mm High Quality @BBL H2S.json"
@@ -515,6 +583,10 @@
 			"name": "0.08mm High Quality @BBL A1M 0.2 nozzle",
 			"sub_path": "process/0.08mm High Quality @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "0.08mm High Quality @BBL A2L 0.2 nozzle",
+			"sub_path": "process/0.08mm High Quality @BBL A2L 0.2 nozzle.json"
+		},
 		{
 			"name": "0.08mm High Quality @BBL H2S 0.2 nozzle",
 			"sub_path": "process/0.08mm High Quality @BBL H2S 0.2 nozzle.json"
@@ -571,6 +643,10 @@
 			"name": "0.10mm Standard @BBL A1M 0.2 nozzle",
 			"sub_path": "process/0.10mm Standard @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @BBL A2L 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @BBL A2L 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @BBL H2S 0.2 nozzle",
 			"sub_path": "process/0.10mm Standard @BBL H2S 0.2 nozzle.json"
@@ -611,6 +687,10 @@
 			"name": "0.12mm High Quality @BBL A1M",
 			"sub_path": "process/0.12mm High Quality @BBL A1M.json"
 		},
+		{
+			"name": "0.12mm High Quality @BBL A2L",
+			"sub_path": "process/0.12mm High Quality @BBL A2L.json"
+		},
 		{
 			"name": "0.12mm High Quality @BBL H2S",
 			"sub_path": "process/0.12mm High Quality @BBL H2S.json"
@@ -627,6 +707,10 @@
 			"name": "0.12mm High Quality @BBL X1C",
 			"sub_path": "process/0.12mm High Quality @BBL X1C.json"
 		},
+		{
+			"name": "0.12mm Balanced Quality @BBL A2L 0.2 nozzle",
+			"sub_path": "process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json"
+		},
 		{
 			"name": "0.12mm Balanced Quality @BBL H2S 0.2 nozzle",
 			"sub_path": "process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json"
@@ -675,6 +759,10 @@
 			"name": "0.16mm High Quality @BBL A1M",
 			"sub_path": "process/0.16mm High Quality @BBL A1M.json"
 		},
+		{
+			"name": "0.16mm High Quality @BBL A2L",
+			"sub_path": "process/0.16mm High Quality @BBL A2L.json"
+		},
 		{
 			"name": "0.16mm High Quality @BBL H2S",
 			"sub_path": "process/0.16mm High Quality @BBL H2S.json"
@@ -707,6 +795,10 @@
 			"name": "0.16mm Optimal @BBL X1C",
 			"sub_path": "process/0.16mm Optimal @BBL X1C.json"
 		},
+		{
+			"name": "0.16mm Standard @BBL A2L",
+			"sub_path": "process/0.16mm Standard @BBL A2L.json"
+		},
 		{
 			"name": "0.16mm Standard @BBL H2S",
 			"sub_path": "process/0.16mm Standard @BBL H2S.json"
@@ -715,6 +807,10 @@
 			"name": "0.16mm Standard @BBL P2S",
 			"sub_path": "process/0.16mm Standard @BBL P2S.json"
 		},
+		{
+			"name": "0.18mm Balanced Quality @BBL A2L 0.6 nozzle",
+			"sub_path": "process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json"
+		},
 		{
 			"name": "0.18mm Balanced Quality @BBL H2S 0.6 nozzle",
 			"sub_path": "process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json"
@@ -739,6 +835,10 @@
 			"name": "0.18mm Standard @BBL X1C 0.6 nozzle",
 			"sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json"
 		},
+		{
+			"name": "0.20mm High Quality @BBL A2L",
+			"sub_path": "process/0.20mm High Quality @BBL A2L.json"
+		},
 		{
 			"name": "0.20mm High Quality @BBL H2S",
 			"sub_path": "process/0.20mm High Quality @BBL H2S.json"
@@ -755,6 +855,10 @@
 			"name": "0.20mm Standard @BBL A1M",
 			"sub_path": "process/0.20mm Standard @BBL A1M.json"
 		},
+		{
+			"name": "0.20mm Standard @BBL A2L",
+			"sub_path": "process/0.20mm Standard @BBL A2L.json"
+		},
 		{
 			"name": "0.20mm Standard @BBL H2S",
 			"sub_path": "process/0.20mm Standard @BBL H2S.json"
@@ -771,6 +875,10 @@
 			"name": "0.20mm Standard @BBL X1C",
 			"sub_path": "process/0.20mm Standard @BBL X1C.json"
 		},
+		{
+			"name": "0.20mm Steady @BBL A2L",
+			"sub_path": "process/0.20mm Steady @BBL A2L.json"
+		},
 		{
 			"name": "0.20mm Strength @BBL A1",
 			"sub_path": "process/0.20mm Strength @BBL A1.json"
@@ -803,6 +911,10 @@
 			"name": "0.24mm Draft @BBL X1C",
 			"sub_path": "process/0.24mm Draft @BBL X1C.json"
 		},
+		{
+			"name": "0.24mm Standard @BBL A2L",
+			"sub_path": "process/0.24mm Standard @BBL A2L.json"
+		},
 		{
 			"name": "0.24mm Standard @BBL H2S",
 			"sub_path": "process/0.24mm Standard @BBL H2S.json"
@@ -811,6 +923,10 @@
 			"name": "0.24mm Standard @BBL P2S",
 			"sub_path": "process/0.24mm Standard @BBL P2S.json"
 		},
+		{
+			"name": "0.24mm Balanced Quality @BBL A2L 0.6 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json"
+		},
 		{
 			"name": "0.24mm Balanced Quality @BBL H2S 0.6 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json"
@@ -835,6 +951,10 @@
 			"name": "0.24mm Standard @BBL X1C 0.6 nozzle",
 			"sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json"
 		},
+		{
+			"name": "0.24mm Balanced Quality @BBL A2L 0.8 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json"
+		},
 		{
 			"name": "0.24mm Balanced Quality @BBL H2S 0.8 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json"
@@ -883,6 +1003,10 @@
 			"name": "0.30mm Standard @BBL A1M 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @BBL A1M 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @BBL A2L 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @BBL A2L 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @BBL H2S 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @BBL H2S 0.6 nozzle.json"
@@ -919,6 +1043,10 @@
 			"name": "0.30mm Strength @BBL X1C 0.6 nozzle",
 			"sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json"
 		},
+		{
+			"name": "0.32mm Balanced Quality @BBL A2L 0.8 nozzle",
+			"sub_path": "process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json"
+		},
 		{
 			"name": "0.32mm Balanced Quality @BBL H2S 0.8 nozzle",
 			"sub_path": "process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json"
@@ -967,6 +1095,10 @@
 			"name": "0.40mm Standard @BBL A1M 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @BBL A2L 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @BBL A2L 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @BBL H2S 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @BBL H2S 0.8 nozzle.json"
@@ -1034,138 +1166,6 @@
 		{
 			"name": "0.56mm Standard @BBL X1C 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json"
-		},
-		{
-			"name": "0.08mm High Quality @BBL A2L",
-			"sub_path": "process/0.08mm High Quality @BBL A2L.json"
-		},
-		{
-			"name": "0.08mm High Quality @BBL A2L 0.2 nozzle",
-			"sub_path": "process/0.08mm High Quality @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "0.08mm High Quality @BBL H2C",
-			"sub_path": "process/0.08mm High Quality @BBL H2C.json"
-		},
-		{
-			"name": "0.08mm High Quality @BBL H2C 0.2 nozzle",
-			"sub_path": "process/0.08mm High Quality @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "0.10mm Standard @BBL A2L 0.2 nozzle",
-			"sub_path": "process/0.10mm Standard @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "0.10mm Standard @BBL H2C 0.2 nozzle",
-			"sub_path": "process/0.10mm Standard @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm Balanced Quality @BBL A2L 0.2 nozzle",
-			"sub_path": "process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm Balanced Quality @BBL H2C 0.2 nozzle",
-			"sub_path": "process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm High Quality @BBL A2L",
-			"sub_path": "process/0.12mm High Quality @BBL A2L.json"
-		},
-		{
-			"name": "0.12mm High Quality @BBL H2C",
-			"sub_path": "process/0.12mm High Quality @BBL H2C.json"
-		},
-		{
-			"name": "0.16mm High Quality @BBL A2L",
-			"sub_path": "process/0.16mm High Quality @BBL A2L.json"
-		},
-		{
-			"name": "0.16mm High Quality @BBL H2C",
-			"sub_path": "process/0.16mm High Quality @BBL H2C.json"
-		},
-		{
-			"name": "0.16mm Standard @BBL A2L",
-			"sub_path": "process/0.16mm Standard @BBL A2L.json"
-		},
-		{
-			"name": "0.16mm Standard @BBL H2C",
-			"sub_path": "process/0.16mm Standard @BBL H2C.json"
-		},
-		{
-			"name": "0.18mm Balanced Quality @BBL A2L 0.6 nozzle",
-			"sub_path": "process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "0.18mm Balanced Quality @BBL H2C 0.6 nozzle",
-			"sub_path": "process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "0.20mm High Quality @BBL A2L",
-			"sub_path": "process/0.20mm High Quality @BBL A2L.json"
-		},
-		{
-			"name": "0.20mm High Quality @BBL H2C",
-			"sub_path": "process/0.20mm High Quality @BBL H2C.json"
-		},
-		{
-			"name": "0.20mm Standard @BBL A2L",
-			"sub_path": "process/0.20mm Standard @BBL A2L.json"
-		},
-		{
-			"name": "0.20mm Standard @BBL H2C",
-			"sub_path": "process/0.20mm Standard @BBL H2C.json"
-		},
-		{
-			"name": "0.20mm Steady @BBL A2L",
-			"sub_path": "process/0.20mm Steady @BBL A2L.json"
-		},
-		{
-			"name": "0.24mm Balanced Quality @BBL A2L 0.6 nozzle",
-			"sub_path": "process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "0.24mm Balanced Quality @BBL A2L 0.8 nozzle",
-			"sub_path": "process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "0.24mm Balanced Quality @BBL H2C 0.8 nozzle",
-			"sub_path": "process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "0.24mm Balanced Strength @BBL H2C 0.6 nozzle",
-			"sub_path": "process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "0.24mm Standard @BBL A2L",
-			"sub_path": "process/0.24mm Standard @BBL A2L.json"
-		},
-		{
-			"name": "0.24mm Standard @BBL H2C",
-			"sub_path": "process/0.24mm Standard @BBL H2C.json"
-		},
-		{
-			"name": "0.30mm Standard @BBL A2L 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @BBL H2C 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "0.32mm Balanced Quality @BBL A2L 0.8 nozzle",
-			"sub_path": "process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "0.32mm Balanced Strength @BBL H2C 0.8 nozzle",
-			"sub_path": "process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @BBL A2L 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @BBL H2C 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @BBL H2C 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -1733,6 +1733,10 @@
 			"name": "Bambu PLA Metal @base",
 			"sub_path": "filament/Bambu PLA Metal @base.json"
 		},
+		{
+			"name": "Bambu PLA Pure @base",
+			"sub_path": "filament/Bambu PLA Pure @base.json"
+		},
 		{
 			"name": "Bambu PLA Silk @base",
 			"sub_path": "filament/Bambu PLA Silk @base.json"
@@ -2077,6 +2081,22 @@
 			"name": "Bambu ABS @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Bambu ABS @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu ABS @BBL H2C",
+			"sub_path": "filament/Bambu ABS @BBL H2C.json"
+		},
+		{
+			"name": "Bambu ABS @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu ABS @BBL H2D",
 			"sub_path": "filament/Bambu ABS @BBL H2D.json"
@@ -2193,6 +2213,14 @@
 			"name": "Bambu ABS-GF @BBL A1",
 			"sub_path": "filament/Bambu ABS-GF @BBL A1.json"
 		},
+		{
+			"name": "Bambu ABS-GF @BBL H2C",
+			"sub_path": "filament/Bambu ABS-GF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu ABS-GF @BBL H2D",
 			"sub_path": "filament/Bambu ABS-GF @BBL H2D.json"
@@ -2229,6 +2257,14 @@
 			"name": "Bambu Support for ABS @BBL A1",
 			"sub_path": "filament/Bambu Support for ABS @BBL A1.json"
 		},
+		{
+			"name": "Bambu Support for ABS @BBL H2C",
+			"sub_path": "filament/Bambu Support for ABS @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support for ABS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support for ABS @BBL H2D",
 			"sub_path": "filament/Bambu Support for ABS @BBL H2D.json"
@@ -2273,6 +2309,18 @@
 			"name": "Generic ABS @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Generic ABS @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic ABS @BBL H2C",
+			"sub_path": "filament/Generic ABS @BBL H2C.json"
+		},
+		{
+			"name": "Generic ABS @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic ABS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic ABS @BBL H2D",
 			"sub_path": "filament/Generic ABS @BBL H2D.json"
@@ -2385,6 +2433,22 @@
 			"name": "Bambu ASA @BBL A1 0.6 nozzle",
 			"sub_path": "filament/Bambu ASA @BBL A1 0.6 nozzle.json"
 		},
+		{
+			"name": "Bambu ASA @BBL H2C",
+			"sub_path": "filament/Bambu ASA @BBL H2C.json"
+		},
+		{
+			"name": "Bambu ASA @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu ASA @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu ASA @BBL H2D 0.2 nozzle.json"
@@ -2497,6 +2561,14 @@
 			"name": "Bambu ASA-Aero @BBL A1",
 			"sub_path": "filament/Bambu ASA-Aero @BBL A1.json"
 		},
+		{
+			"name": "Bambu ASA-Aero @BBL H2C",
+			"sub_path": "filament/Bambu ASA-Aero @BBL H2C.json"
+		},
+		{
+			"name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu ASA-Aero @BBL H2D",
 			"sub_path": "filament/Bambu ASA-Aero @BBL H2D.json"
@@ -2537,6 +2609,14 @@
 			"name": "Bambu ASA-CF @BBL A1 0.6 nozzle",
 			"sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json"
 		},
+		{
+			"name": "Bambu ASA-CF @BBL H2C",
+			"sub_path": "filament/Bambu ASA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu ASA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu ASA-CF @BBL H2D 0.4 nozzle",
 			"sub_path": "filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json"
@@ -2605,6 +2685,18 @@
 			"name": "Generic ASA @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Generic ASA @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic ASA @BBL H2C",
+			"sub_path": "filament/Generic ASA @BBL H2C.json"
+		},
+		{
+			"name": "Generic ASA @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic ASA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic ASA @BBL H2D",
 			"sub_path": "filament/Generic ASA @BBL H2D.json"
@@ -2693,6 +2785,18 @@
 			"name": "Generic BVOH @BBL A1M",
 			"sub_path": "filament/Generic BVOH @BBL A1M.json"
 		},
+		{
+			"name": "Generic BVOH @BBL A2L",
+			"sub_path": "filament/Generic BVOH @BBL A2L.json"
+		},
+		{
+			"name": "Generic BVOH @BBL H2C",
+			"sub_path": "filament/Generic BVOH @BBL H2C.json"
+		},
+		{
+			"name": "Generic BVOH @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic BVOH @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic BVOH @BBL H2D",
 			"sub_path": "filament/Generic BVOH @BBL H2D.json"
@@ -2729,6 +2833,18 @@
 			"name": "Generic EVA @BBL A1M",
 			"sub_path": "filament/Generic EVA @BBL A1M.json"
 		},
+		{
+			"name": "Generic EVA @BBL A2L",
+			"sub_path": "filament/Generic EVA @BBL A2L.json"
+		},
+		{
+			"name": "Generic EVA @BBL H2C",
+			"sub_path": "filament/Generic EVA @BBL H2C.json"
+		},
+		{
+			"name": "Generic EVA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic EVA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic EVA @BBL H2D",
 			"sub_path": "filament/Generic EVA @BBL H2D.json"
@@ -2781,6 +2897,26 @@
 			"name": "Generic HIPS @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic HIPS @BBL A2L",
+			"sub_path": "filament/Generic HIPS @BBL A2L.json"
+		},
+		{
+			"name": "Generic HIPS @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL H2C",
+			"sub_path": "filament/Generic HIPS @BBL H2C.json"
+		},
+		{
+			"name": "Generic HIPS @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic HIPS @BBL H2D",
 			"sub_path": "filament/Generic HIPS @BBL H2D.json"
@@ -2849,6 +2985,14 @@
 			"name": "Bambu PA-CF @BBL A1",
 			"sub_path": "filament/Bambu PA-CF @BBL A1.json"
 		},
+		{
+			"name": "Bambu PA-CF @BBL H2C",
+			"sub_path": "filament/Bambu PA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PA-CF @BBL H2D",
 			"sub_path": "filament/Bambu PA-CF @BBL H2D.json"
@@ -2889,6 +3033,14 @@
 			"name": "Bambu PA6-CF @BBL A1",
 			"sub_path": "filament/Bambu PA6-CF @BBL A1.json"
 		},
+		{
+			"name": "Bambu PA6-CF @BBL H2C",
+			"sub_path": "filament/Bambu PA6-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PA6-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PA6-CF @BBL H2D",
 			"sub_path": "filament/Bambu PA6-CF @BBL H2D.json"
@@ -2925,6 +3077,14 @@
 			"name": "Bambu PA6-GF @BBL A1",
 			"sub_path": "filament/Bambu PA6-GF @BBL A1.json"
 		},
+		{
+			"name": "Bambu PA6-GF @BBL H2C",
+			"sub_path": "filament/Bambu PA6-GF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PA6-GF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PA6-GF @BBL H2D",
 			"sub_path": "filament/Bambu PA6-GF @BBL H2D.json"
@@ -2961,6 +3121,14 @@
 			"name": "Bambu PAHT-CF @BBL A1",
 			"sub_path": "filament/Bambu PAHT-CF @BBL A1.json"
 		},
+		{
+			"name": "Bambu PAHT-CF @BBL H2C",
+			"sub_path": "filament/Bambu PAHT-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PAHT-CF @BBL H2D",
 			"sub_path": "filament/Bambu PAHT-CF @BBL H2D.json"
@@ -2997,6 +3165,14 @@
 			"name": "Bambu Support For PA/PET @BBL A1",
 			"sub_path": "filament/Bambu Support For PA PET @BBL A1.json"
 		},
+		{
+			"name": "Bambu Support For PA/PET @BBL H2C",
+			"sub_path": "filament/Bambu Support For PA PET @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support For PA/PET @BBL H2D",
 			"sub_path": "filament/Bambu Support For PA PET @BBL H2D.json"
@@ -3033,6 +3209,14 @@
 			"name": "Bambu Support G @BBL A1",
 			"sub_path": "filament/Bambu Support G @BBL A1.json"
 		},
+		{
+			"name": "Bambu Support G @BBL H2C",
+			"sub_path": "filament/Bambu Support G @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support G @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support G @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support G @BBL H2D",
 			"sub_path": "filament/Bambu Support G @BBL H2D.json"
@@ -3121,6 +3305,14 @@
 			"name": "Generic PA",
 			"sub_path": "filament/Generic PA.json"
 		},
+		{
+			"name": "Generic PA @BBL H2C",
+			"sub_path": "filament/Generic PA @BBL H2C.json"
+		},
+		{
+			"name": "Generic PA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PA @BBL H2D",
 			"sub_path": "filament/Generic PA @BBL H2D.json"
@@ -3201,6 +3393,22 @@
 			"name": "Bambu PC @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Bambu PC @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PC @BBL H2C",
+			"sub_path": "filament/Bambu PC @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PC @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PC @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu PC @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu PC @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu PC @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu PC @BBL H2D 0.2 nozzle.json"
@@ -3321,6 +3529,18 @@
 			"name": "Bambu PC FR @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Bambu PC FR @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PC FR @BBL H2C",
+			"sub_path": "filament/Bambu PC FR @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PC FR @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu PC FR @BBL H2D 0.2 nozzle.json"
@@ -3457,6 +3677,18 @@
 			"name": "Generic PC @BBL A1 0.2 nozzle",
 			"sub_path": "filament/Generic PC @BBL A1 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic PC @BBL H2C",
+			"sub_path": "filament/Generic PC @BBL H2C.json"
+		},
+		{
+			"name": "Generic PC @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PC @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PC @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PC @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PC @BBL H2D",
 			"sub_path": "filament/Generic PC @BBL H2D.json"
@@ -3505,6 +3737,18 @@
 			"name": "Generic PCTG @BBL A1M",
 			"sub_path": "filament/Generic PCTG @BBL A1M.json"
 		},
+		{
+			"name": "Generic PCTG @BBL A2L",
+			"sub_path": "filament/Generic PCTG @BBL A2L.json"
+		},
+		{
+			"name": "Generic PCTG @BBL H2C",
+			"sub_path": "filament/Generic PCTG @BBL H2C.json"
+		},
+		{
+			"name": "Generic PCTG @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PCTG @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PCTG @BBL H2D",
 			"sub_path": "filament/Generic PCTG @BBL H2D.json"
@@ -3541,6 +3785,18 @@
 			"name": "Generic PE @BBL A1M",
 			"sub_path": "filament/Generic PE @BBL A1M.json"
 		},
+		{
+			"name": "Generic PE @BBL A2L",
+			"sub_path": "filament/Generic PE @BBL A2L.json"
+		},
+		{
+			"name": "Generic PE @BBL H2C",
+			"sub_path": "filament/Generic PE @BBL H2C.json"
+		},
+		{
+			"name": "Generic PE @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PE @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PE @BBL H2D",
 			"sub_path": "filament/Generic PE @BBL H2D.json"
@@ -3577,6 +3833,18 @@
 			"name": "Generic PE-CF @BBL A1M",
 			"sub_path": "filament/Generic PE-CF @BBL A1M.json"
 		},
+		{
+			"name": "Generic PE-CF @BBL A2L",
+			"sub_path": "filament/Generic PE-CF @BBL A2L.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL H2C",
+			"sub_path": "filament/Generic PE-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PE-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PE-CF @BBL H2D",
 			"sub_path": "filament/Generic PE-CF @BBL H2D.json"
@@ -3841,6 +4109,14 @@
 			"name": "Bambu PET-CF @BBL A1",
 			"sub_path": "filament/Bambu PET-CF @BBL A1.json"
 		},
+		{
+			"name": "Bambu PET-CF @BBL H2C",
+			"sub_path": "filament/Bambu PET-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PET-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PET-CF @BBL H2D",
 			"sub_path": "filament/Bambu PET-CF @BBL H2D.json"
@@ -3901,6 +4177,34 @@
 			"name": "Bambu PETG Basic @BBL A1M 0.8 nozzle",
 			"sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu PETG Basic @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL H2C",
+			"sub_path": "filament/Bambu PETG Basic @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PETG Basic @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json"
@@ -3997,6 +4301,38 @@
 			"name": "Bambu PETG HF @BBL A1M 0.8 nozzle",
 			"sub_path": "filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu PETG HF @BBL A2L",
+			"sub_path": "filament/Bambu PETG HF @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL H2C",
+			"sub_path": "filament/Bambu PETG HF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu PETG HF @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json"
@@ -4105,6 +4441,34 @@
 			"name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle",
 			"sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu PETG Translucent @BBL A2L",
+			"sub_path": "filament/Bambu PETG Translucent @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL H2C",
+			"sub_path": "filament/Bambu PETG Translucent @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle",
 			"sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json"
@@ -4189,6 +4553,26 @@
 			"name": "Bambu PETG-CF @BBL A1M",
 			"sub_path": "filament/Bambu PETG-CF @BBL A1M.json"
 		},
+		{
+			"name": "Bambu PETG-CF @BBL A2L",
+			"sub_path": "filament/Bambu PETG-CF @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL H2C",
+			"sub_path": "filament/Bambu PETG-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PETG-CF @BBL H2D 0.4 nozzle",
 			"sub_path": "filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json"
@@ -4305,6 +4689,26 @@
 			"name": "Generic PETG @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic PETG @BBL A2L",
+			"sub_path": "filament/Generic PETG @BBL A2L.json"
+		},
+		{
+			"name": "Generic PETG @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL H2C",
+			"sub_path": "filament/Generic PETG @BBL H2C.json"
+		},
+		{
+			"name": "Generic PETG @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PETG @BBL H2D",
 			"sub_path": "filament/Generic PETG @BBL H2D.json"
@@ -4397,6 +4801,26 @@
 			"name": "Generic PETG HF @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic PETG HF @BBL A2L",
+			"sub_path": "filament/Generic PETG HF @BBL A2L.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL H2C",
+			"sub_path": "filament/Generic PETG HF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PETG HF @BBL H2D",
 			"sub_path": "filament/Generic PETG HF @BBL H2D.json"
@@ -4469,6 +4893,18 @@
 			"name": "Generic PETG-CF @BBL A1M",
 			"sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json"
 		},
+		{
+			"name": "Generic PETG-CF @BBL A2L",
+			"sub_path": "filament/Generic PETG-CF @BBL A2L.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL H2C",
+			"sub_path": "filament/Generic PETG-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PETG-CF @BBL H2D",
 			"sub_path": "filament/Generic PETG-CF @BBL H2D.json"
@@ -4593,6 +5029,18 @@
 			"name": "Generic PHA @BBL A1M",
 			"sub_path": "filament/Generic PHA @BBL A1M.json"
 		},
+		{
+			"name": "Generic PHA @BBL A2L",
+			"sub_path": "filament/Generic PHA @BBL A2L.json"
+		},
+		{
+			"name": "Generic PHA @BBL H2C",
+			"sub_path": "filament/Generic PHA @BBL H2C.json"
+		},
+		{
+			"name": "Generic PHA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PHA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PHA @BBL H2D",
 			"sub_path": "filament/Generic PHA @BBL H2D.json"
@@ -5049,6 +5497,26 @@
 			"name": "Bambu PLA Aero @BBL A1M",
 			"sub_path": "filament/Bambu PLA Aero @BBL A1M.json"
 		},
+		{
+			"name": "Bambu PLA Aero @BBL A2L",
+			"sub_path": "filament/Bambu PLA Aero @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL H2C",
+			"sub_path": "filament/Bambu PLA Aero @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Aero @BBL H2D",
 			"sub_path": "filament/Bambu PLA Aero @BBL H2D.json"
@@ -5101,6 +5569,38 @@
 			"name": "Bambu PLA Basic @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Basic @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL H2C",
+			"sub_path": "filament/Bambu PLA Basic @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Basic @BBL H2D",
 			"sub_path": "filament/Bambu PLA Basic @BBL H2D.json"
@@ -5217,6 +5717,34 @@
 			"name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Dynamic @BBL A2L",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL H2C",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Dynamic @BBL H2D",
 			"sub_path": "filament/Bambu PLA Dynamic @BBL H2D.json"
@@ -5309,6 +5837,34 @@
 			"name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Galaxy @BBL A2L",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL H2C",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Galaxy @BBL H2D",
 			"sub_path": "filament/Bambu PLA Galaxy @BBL H2D.json"
@@ -5401,6 +5957,26 @@
 			"name": "Bambu PLA Glow @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Glow @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL H2C",
+			"sub_path": "filament/Bambu PLA Glow @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Glow @BBL H2D",
 			"sub_path": "filament/Bambu PLA Glow @BBL H2D.json"
@@ -5477,6 +6053,34 @@
 			"name": "Bambu PLA Lite @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Lite @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL H2C",
+			"sub_path": "filament/Bambu PLA Lite @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Lite @BBL H2D",
 			"sub_path": "filament/Bambu PLA Lite @BBL H2D.json"
@@ -5569,6 +6173,26 @@
 			"name": "Bambu PLA Marble @BBL A1M",
 			"sub_path": "filament/Bambu PLA Marble @BBL A1M.json"
 		},
+		{
+			"name": "Bambu PLA Marble @BBL A2L",
+			"sub_path": "filament/Bambu PLA Marble @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL H2C",
+			"sub_path": "filament/Bambu PLA Marble @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Marble @BBL H2D",
 			"sub_path": "filament/Bambu PLA Marble @BBL H2D.json"
@@ -5625,6 +6249,38 @@
 			"name": "Bambu PLA Matte @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Matte @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL H2C",
+			"sub_path": "filament/Bambu PLA Matte @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Matte @BBL H2D",
 			"sub_path": "filament/Bambu PLA Matte @BBL H2D.json"
@@ -5741,6 +6397,34 @@
 			"name": "Bambu PLA Metal @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Metal @BBL A2L",
+			"sub_path": "filament/Bambu PLA Metal @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL H2C",
+			"sub_path": "filament/Bambu PLA Metal @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Metal @BBL H2D",
 			"sub_path": "filament/Bambu PLA Metal @BBL H2D.json"
@@ -5813,6 +6497,62 @@
 			"name": "Bambu PLA Metal @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Pure @BBL A2L",
+			"sub_path": "filament/Bambu PLA Pure @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2C",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2D",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2D.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2DP",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2DP.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2S",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2S.json"
+		},
+		{
+			"name": "Bambu PLA Pure @BBL H2S 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Silk @BBL A1",
 			"sub_path": "filament/Bambu PLA Silk @BBL A1.json"
@@ -5829,6 +6569,34 @@
 			"name": "Bambu PLA Silk @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Silk @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL H2C",
+			"sub_path": "filament/Bambu PLA Silk @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Silk @BBL H2D",
 			"sub_path": "filament/Bambu PLA Silk @BBL H2D.json"
@@ -5917,6 +6685,34 @@
 			"name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL H2C",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Silk+ @BBL H2D",
 			"sub_path": "filament/Bambu PLA Silk+ @BBL H2D.json"
@@ -5997,6 +6793,26 @@
 			"name": "Bambu PLA Sparkle @BBL A1M",
 			"sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json"
 		},
+		{
+			"name": "Bambu PLA Sparkle @BBL A2L",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL H2C",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Sparkle @BBL H2D",
 			"sub_path": "filament/Bambu PLA Sparkle @BBL H2D.json"
@@ -6057,6 +6873,26 @@
 			"name": "Bambu PLA Tough @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Tough @BBL A2L",
+			"sub_path": "filament/Bambu PLA Tough @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL H2C",
+			"sub_path": "filament/Bambu PLA Tough @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Tough @BBL H2D",
 			"sub_path": "filament/Bambu PLA Tough @BBL H2D.json"
@@ -6137,6 +6973,38 @@
 			"name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL H2C",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Tough+ @BBL H2D",
 			"sub_path": "filament/Bambu PLA Tough+ @BBL H2D.json"
@@ -6261,6 +7129,30 @@
 			"name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle",
 			"sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA Translucent @BBL A2L",
+			"sub_path": "filament/Bambu PLA Translucent @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL H2C",
+			"sub_path": "filament/Bambu PLA Translucent @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Translucent @BBL H2D",
 			"sub_path": "filament/Bambu PLA Translucent @BBL H2D.json"
@@ -6357,6 +7249,26 @@
 			"name": "Bambu PLA Wood @BBL A1M",
 			"sub_path": "filament/Bambu PLA Wood @BBL A1M.json"
 		},
+		{
+			"name": "Bambu PLA Wood @BBL A2L",
+			"sub_path": "filament/Bambu PLA Wood @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL H2C",
+			"sub_path": "filament/Bambu PLA Wood @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA Wood @BBL H2D",
 			"sub_path": "filament/Bambu PLA Wood @BBL H2D.json"
@@ -6429,6 +7341,26 @@
 			"name": "Bambu PLA-CF @BBL A1M 0.8 nozzle",
 			"sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu PLA-CF @BBL A2L",
+			"sub_path": "filament/Bambu PLA-CF @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL H2C",
+			"sub_path": "filament/Bambu PLA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PLA-CF @BBL H2D 0.4 nozzle",
 			"sub_path": "filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json"
@@ -6497,6 +7429,34 @@
 			"name": "Bambu Support For PLA @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu Support For PLA @BBL A2L",
+			"sub_path": "filament/Bambu Support For PLA @BBL A2L.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL H2C",
+			"sub_path": "filament/Bambu Support For PLA @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support For PLA @BBL H2D",
 			"sub_path": "filament/Bambu Support For PLA @BBL H2D.json"
@@ -6573,6 +7533,26 @@
 			"name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL A2L",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL H2C",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support For PLA/PETG @BBL H2D",
 			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D.json"
@@ -6649,6 +7629,26 @@
 			"name": "Bambu Support W @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu Support W @BBL A2L",
+			"sub_path": "filament/Bambu Support W @BBL A2L.json"
+		},
+		{
+			"name": "Bambu Support W @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL H2C",
+			"sub_path": "filament/Bambu Support W @BBL H2C.json"
+		},
+		{
+			"name": "Bambu Support W @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Support W @BBL H2D",
 			"sub_path": "filament/Bambu Support W @BBL H2D.json"
@@ -6737,6 +7737,26 @@
 			"name": "Generic PLA @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic PLA @BBL A2L",
+			"sub_path": "filament/Generic PLA @BBL A2L.json"
+		},
+		{
+			"name": "Generic PLA @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL H2C",
+			"sub_path": "filament/Generic PLA @BBL H2C.json"
+		},
+		{
+			"name": "Generic PLA @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PLA @BBL H2D",
 			"sub_path": "filament/Generic PLA @BBL H2D.json"
@@ -6829,6 +7849,26 @@
 			"name": "Generic PLA High Speed @BBL A1M",
 			"sub_path": "filament/Generic PLA High Speed @BBL A1M.json"
 		},
+		{
+			"name": "Generic PLA High Speed @BBL A2L",
+			"sub_path": "filament/Generic PLA High Speed @BBL A2L.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL H2C",
+			"sub_path": "filament/Generic PLA High Speed @BBL H2C.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PLA High Speed @BBL H2D",
 			"sub_path": "filament/Generic PLA High Speed @BBL H2D.json"
@@ -6893,6 +7933,18 @@
 			"name": "Generic PLA Silk @BBL A1M",
 			"sub_path": "filament/Generic PLA Silk @BBL A1M.json"
 		},
+		{
+			"name": "Generic PLA Silk @BBL A2L",
+			"sub_path": "filament/Generic PLA Silk @BBL A2L.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL H2C",
+			"sub_path": "filament/Generic PLA Silk @BBL H2C.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PLA Silk @BBL H2D",
 			"sub_path": "filament/Generic PLA Silk @BBL H2D.json"
@@ -6937,6 +7989,18 @@
 			"name": "Generic PLA-CF @BBL A1M",
 			"sub_path": "filament/Generic PLA-CF @BBL A1M.json"
 		},
+		{
+			"name": "Generic PLA-CF @BBL A2L",
+			"sub_path": "filament/Generic PLA-CF @BBL A2L.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL H2C",
+			"sub_path": "filament/Generic PLA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PLA-CF @BBL H2D",
 			"sub_path": "filament/Generic PLA-CF @BBL H2D.json"
@@ -8401,6 +9465,18 @@
 			"name": "Generic PP @BBL A1M",
 			"sub_path": "filament/Generic PP @BBL A1M.json"
 		},
+		{
+			"name": "Generic PP @BBL A2L",
+			"sub_path": "filament/Generic PP @BBL A2L.json"
+		},
+		{
+			"name": "Generic PP @BBL H2C",
+			"sub_path": "filament/Generic PP @BBL H2C.json"
+		},
+		{
+			"name": "Generic PP @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PP @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PP @BBL H2D",
 			"sub_path": "filament/Generic PP @BBL H2D.json"
@@ -8433,6 +9509,14 @@
 			"name": "Generic PP-CF @BBL A1",
 			"sub_path": "filament/Generic PP-CF @BBL A1.json"
 		},
+		{
+			"name": "Generic PP-CF @BBL H2C",
+			"sub_path": "filament/Generic PP-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PP-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PP-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PP-CF @BBL H2D",
 			"sub_path": "filament/Generic PP-CF @BBL H2D.json"
@@ -8465,6 +9549,14 @@
 			"name": "Generic PP-GF @BBL A1",
 			"sub_path": "filament/Generic PP-GF @BBL A1.json"
 		},
+		{
+			"name": "Generic PP-GF @BBL H2C",
+			"sub_path": "filament/Generic PP-GF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PP-GF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PP-GF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PP-GF @BBL H2D",
 			"sub_path": "filament/Generic PP-GF @BBL H2D.json"
@@ -8493,6 +9585,14 @@
 			"name": "Generic PP-GF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PP-GF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "Bambu PPA-CF @BBL H2C",
+			"sub_path": "filament/Bambu PPA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PPA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PPA-CF @BBL H2D",
 			"sub_path": "filament/Bambu PPA-CF @BBL H2D.json"
@@ -8525,6 +9625,14 @@
 			"name": "Bambu PPA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "Generic PPA-CF @BBL H2C",
+			"sub_path": "filament/Generic PPA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PPA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PPA-CF @BBL H2D",
 			"sub_path": "filament/Generic PPA-CF @BBL H2D.json"
@@ -8557,6 +9665,14 @@
 			"name": "Generic PPA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "Generic PPA-GF @BBL H2C",
+			"sub_path": "filament/Generic PPA-GF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PPA-GF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PPA-GF @BBL H2D",
 			"sub_path": "filament/Generic PPA-GF @BBL H2D.json"
@@ -8589,6 +9705,14 @@
 			"name": "Generic PPA-GF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "Bambu PPS-CF @BBL H2C",
+			"sub_path": "filament/Bambu PPS-CF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PPS-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PPS-CF @BBL H2D",
 			"sub_path": "filament/Bambu PPS-CF @BBL H2D.json"
@@ -8605,6 +9729,14 @@
 			"name": "Bambu PPS-CF @BBL X1E",
 			"sub_path": "filament/Bambu PPS-CF @BBL X1E.json"
 		},
+		{
+			"name": "Generic PPS @BBL H2C",
+			"sub_path": "filament/Generic PPS @BBL H2C.json"
+		},
+		{
+			"name": "Generic PPS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PPS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PPS @BBL H2D",
 			"sub_path": "filament/Generic PPS @BBL H2D.json"
@@ -8621,6 +9753,14 @@
 			"name": "Generic PPS @BBL X1E",
 			"sub_path": "filament/Generic PPS @BBL X1E.json"
 		},
+		{
+			"name": "Generic PPS-CF @BBL H2C",
+			"sub_path": "filament/Generic PPS-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PPS-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PPS-CF @BBL H2D",
 			"sub_path": "filament/Generic PPS-CF @BBL H2D.json"
@@ -8653,6 +9793,18 @@
 			"name": "Bambu PVA @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Bambu PVA @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu PVA @BBL A2L",
+			"sub_path": "filament/Bambu PVA @BBL A2L.json"
+		},
+		{
+			"name": "Bambu PVA @BBL H2C",
+			"sub_path": "filament/Bambu PVA @BBL H2C.json"
+		},
+		{
+			"name": "Bambu PVA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu PVA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu PVA @BBL H2D",
 			"sub_path": "filament/Bambu PVA @BBL H2D.json"
@@ -8717,6 +9869,26 @@
 			"name": "Generic PVA @BBL A1M 0.2 nozzle",
 			"sub_path": "filament/Generic PVA @BBL A1M 0.2 nozzle.json"
 		},
+		{
+			"name": "Generic PVA @BBL A2L",
+			"sub_path": "filament/Generic PVA @BBL A2L.json"
+		},
+		{
+			"name": "Generic PVA @BBL A2L 0.2 nozzle",
+			"sub_path": "filament/Generic PVA @BBL A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL H2C",
+			"sub_path": "filament/Generic PVA @BBL H2C.json"
+		},
+		{
+			"name": "Generic PVA @BBL H2C 0.2 nozzle",
+			"sub_path": "filament/Generic PVA @BBL H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PVA @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PVA @BBL H2D",
 			"sub_path": "filament/Generic PVA @BBL H2D.json"
@@ -8861,6 +10033,18 @@
 			"name": "BETA TPU Matte @BBL X1C",
 			"sub_path": "filament/BETA/BETA TPU Matte @BBL X1C.json"
 		},
+		{
+			"name": "Bambu TPU 85A @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL H2C",
+			"sub_path": "filament/Bambu TPU 85A @BBL H2C.json"
+		},
 		{
 			"name": "Bambu TPU 85A @BBL H2D",
 			"sub_path": "filament/Bambu TPU 85A @BBL H2D.json"
@@ -8921,6 +10105,26 @@
 			"name": "Bambu TPU 90A @BBL A1M",
 			"sub_path": "filament/Bambu TPU 90A @BBL A1M.json"
 		},
+		{
+			"name": "Bambu TPU 90A @BBL A2L",
+			"sub_path": "filament/Bambu TPU 90A @BBL A2L.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL H2C",
+			"sub_path": "filament/Bambu TPU 90A @BBL H2C.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu TPU 90A @BBL H2D",
 			"sub_path": "filament/Bambu TPU 90A @BBL H2D.json"
@@ -8997,6 +10201,18 @@
 			"name": "Bambu TPU 95A @BBL A1M",
 			"sub_path": "filament/Bambu TPU 95A @BBL A1M.json"
 		},
+		{
+			"name": "Bambu TPU 95A @BBL A2L",
+			"sub_path": "filament/Bambu TPU 95A @BBL A2L.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL H2C",
+			"sub_path": "filament/Bambu TPU 95A @BBL H2C.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu TPU 95A @BBL H2D",
 			"sub_path": "filament/Bambu TPU 95A @BBL H2D.json"
@@ -9041,22 +10257,34 @@
 			"name": "Bambu TPU 95A HF @BBL A1M",
 			"sub_path": "filament/Bambu TPU 95A HF @BBL A1M.json"
 		},
+		{
+			"name": "Bambu TPU 95A HF @BBL A2L",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL H2C",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL H2C.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu TPU 95A HF @BBL H2D",
 			"sub_path": "filament/Bambu TPU 95A HF @BBL H2D.json"
 		},
-		{
-			"name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json"
-		},
 		{
 			"name": "Bambu TPU 95A HF @BBL H2DP",
 			"sub_path": "filament/Bambu TPU 95A HF @BBL H2DP.json"
 		},
-		{
-			"name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json"
-		},
 		{
 			"name": "Bambu TPU 95A HF @BBL H2S",
 			"sub_path": "filament/Bambu TPU 95A HF @BBL H2S.json"
@@ -9101,6 +10329,26 @@
 			"name": "Bambu TPU for AMS @BBL A1M",
 			"sub_path": "filament/Bambu TPU for AMS @BBL A1M.json"
 		},
+		{
+			"name": "Bambu TPU for AMS @BBL A2L",
+			"sub_path": "filament/Bambu TPU for AMS @BBL A2L.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle",
+			"sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL H2C",
+			"sub_path": "filament/Bambu TPU for AMS @BBL H2C.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu TPU for AMS @BBL H2D",
 			"sub_path": "filament/Bambu TPU for AMS @BBL H2D.json"
@@ -9137,6 +10385,14 @@
 			"name": "Generic TPU",
 			"sub_path": "filament/Generic TPU.json"
 		},
+		{
+			"name": "Generic TPU @BBL H2C",
+			"sub_path": "filament/Generic TPU @BBL H2C.json"
+		},
+		{
+			"name": "Generic TPU @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic TPU @BBL H2D",
 			"sub_path": "filament/Generic TPU @BBL H2D.json"
@@ -9181,6 +10437,18 @@
 			"name": "Generic TPU for AMS @BBL A1M",
 			"sub_path": "filament/Generic TPU for AMS @BBL A1M.json"
 		},
+		{
+			"name": "Generic TPU for AMS @BBL A2L",
+			"sub_path": "filament/Generic TPU for AMS @BBL A2L.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL H2C",
+			"sub_path": "filament/Generic TPU for AMS @BBL H2C.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic TPU for AMS @BBL H2D",
 			"sub_path": "filament/Generic TPU for AMS @BBL H2D.json"
@@ -9273,6 +10541,14 @@
 			"name": "Generic PA-CF @BBL A1",
 			"sub_path": "filament/Generic PA-CF @BBL A1.json"
 		},
+		{
+			"name": "Generic PA-CF @BBL H2C",
+			"sub_path": "filament/Generic PA-CF @BBL H2C.json"
+		},
+		{
+			"name": "Generic PA-CF @BBL H2C 0.4 nozzle",
+			"sub_path": "filament/Generic PA-CF @BBL H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic PA-CF @BBL H2D",
 			"sub_path": "filament/Generic PA-CF @BBL H2D.json"
@@ -9425,6 +10701,14 @@
 			"name": "PolyTerra PLA @BBL X1C 0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyTerra PLA @BBL X1C 0.2 nozzle.json"
 		},
+		{
+			"name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json"
+		},
 		{
 			"name": "Generic TPU @BBL A1",
 			"sub_path": "filament/Generic TPU @BBL A1.json"
@@ -9433,6 +10717,10 @@
 			"name": "Generic TPU @BBL A1M",
 			"sub_path": "filament/Generic TPU @BBL A1M.json"
 		},
+		{
+			"name": "Generic TPU @BBL A2L",
+			"sub_path": "filament/Generic TPU @BBL A2L.json"
+		},
 		{
 			"name": "Generic TPU @BBL H2S",
 			"sub_path": "filament/Generic TPU @BBL H2S.json"
@@ -9992,1294 +11280,6 @@
 		{
 			"name": "fdm_filament_dual_common",
 			"sub_path": "filament/fdm_filament_dual_common.json"
-		},
-		{
-			"name": "Bambu ABS @BBL H2C",
-			"sub_path": "filament/Bambu ABS @BBL H2C.json"
-		},
-		{
-			"name": "Bambu ABS @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu ABS @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu ABS @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu ABS @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS-GF @BBL H2C",
-			"sub_path": "filament/Bambu ABS-GF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu ASA @BBL H2C",
-			"sub_path": "filament/Bambu ASA @BBL H2C.json"
-		},
-		{
-			"name": "Bambu ASA @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu ASA @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu ASA @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu ASA @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu ASA @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu ASA @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu ASA-Aero @BBL H2C",
-			"sub_path": "filament/Bambu ASA-Aero @BBL H2C.json"
-		},
-		{
-			"name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu ASA-CF @BBL H2C",
-			"sub_path": "filament/Bambu ASA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu ASA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PA-CF @BBL H2C",
-			"sub_path": "filament/Bambu PA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PA6-CF @BBL H2C",
-			"sub_path": "filament/Bambu PA6-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PA6-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PA6-GF @BBL H2C",
-			"sub_path": "filament/Bambu PA6-GF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PA6-GF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PAHT-CF @BBL H2C",
-			"sub_path": "filament/Bambu PAHT-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PC @BBL H2C",
-			"sub_path": "filament/Bambu PC @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PC @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PC @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PC @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu PC @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PC @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu PC @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PC FR @BBL H2C",
-			"sub_path": "filament/Bambu PC FR @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PC FR @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PC FR @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PC FR @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PC FR @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PET-CF @BBL H2C",
-			"sub_path": "filament/Bambu PET-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PET-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL H2C",
-			"sub_path": "filament/Bambu PETG Basic @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Basic @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL A2L",
-			"sub_path": "filament/Bambu PETG HF @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL H2C",
-			"sub_path": "filament/Bambu PETG HF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG HF @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL A2L",
-			"sub_path": "filament/Bambu PETG Translucent @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL H2C",
-			"sub_path": "filament/Bambu PETG Translucent @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG-CF @BBL A2L",
-			"sub_path": "filament/Bambu PETG-CF @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PETG-CF @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG-CF @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG-CF @BBL H2C",
-			"sub_path": "filament/Bambu PETG-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PETG-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Aero @BBL A2L",
-			"sub_path": "filament/Bambu PLA Aero @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Aero @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Aero @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Aero @BBL H2C",
-			"sub_path": "filament/Bambu PLA Aero @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Aero @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL H2C",
-			"sub_path": "filament/Bambu PLA Basic @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Basic @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL A2L",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL H2C",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL A2L",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL H2C",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Glow @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Glow @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Glow @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Glow @BBL H2C",
-			"sub_path": "filament/Bambu PLA Glow @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Glow @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL H2C",
-			"sub_path": "filament/Bambu PLA Lite @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Lite @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Marble @BBL A2L",
-			"sub_path": "filament/Bambu PLA Marble @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Marble @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Marble @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Marble @BBL H2C",
-			"sub_path": "filament/Bambu PLA Marble @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Marble @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL H2C",
-			"sub_path": "filament/Bambu PLA Matte @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Matte @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL A2L",
-			"sub_path": "filament/Bambu PLA Metal @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL H2C",
-			"sub_path": "filament/Bambu PLA Metal @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Metal @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @base",
-			"sub_path": "filament/Bambu PLA Pure @base.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL A2L",
-			"sub_path": "filament/Bambu PLA Pure @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2C",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2D",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2D.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2D 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2D 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2DP",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2DP.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2S",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2S.json"
-		},
-		{
-			"name": "Bambu PLA Pure @BBL H2S 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL H2C",
-			"sub_path": "filament/Bambu PLA Silk @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL H2C",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Sparkle @BBL A2L",
-			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Sparkle @BBL H2C",
-			"sub_path": "filament/Bambu PLA Sparkle @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough @BBL A2L",
-			"sub_path": "filament/Bambu PLA Tough @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Tough @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough @BBL H2C",
-			"sub_path": "filament/Bambu PLA Tough @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Tough @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL H2C",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL A2L",
-			"sub_path": "filament/Bambu PLA Translucent @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL H2C",
-			"sub_path": "filament/Bambu PLA Translucent @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Wood @BBL A2L",
-			"sub_path": "filament/Bambu PLA Wood @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA Wood @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Wood @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA Wood @BBL H2C",
-			"sub_path": "filament/Bambu PLA Wood @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA Wood @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA-CF @BBL A2L",
-			"sub_path": "filament/Bambu PLA-CF @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PLA-CF @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA-CF @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA-CF @BBL H2C",
-			"sub_path": "filament/Bambu PLA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PLA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PPA-CF @BBL H2C",
-			"sub_path": "filament/Bambu PPA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PPA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PPS-CF @BBL H2C",
-			"sub_path": "filament/Bambu PPS-CF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PPS-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PVA @BBL A2L",
-			"sub_path": "filament/Bambu PVA @BBL A2L.json"
-		},
-		{
-			"name": "Bambu PVA @BBL H2C",
-			"sub_path": "filament/Bambu PVA @BBL H2C.json"
-		},
-		{
-			"name": "Bambu PVA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu PVA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PA/PET @BBL H2C",
-			"sub_path": "filament/Bambu Support For PA PET @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL A2L",
-			"sub_path": "filament/Bambu Support For PLA @BBL A2L.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL H2C",
-			"sub_path": "filament/Bambu Support For PLA @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA/PETG @BBL A2L",
-			"sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L.json"
-		},
-		{
-			"name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA/PETG @BBL H2C",
-			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support G @BBL H2C",
-			"sub_path": "filament/Bambu Support G @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support G @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support G @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support W @BBL A2L",
-			"sub_path": "filament/Bambu Support W @BBL A2L.json"
-		},
-		{
-			"name": "Bambu Support W @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Bambu Support W @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support W @BBL H2C",
-			"sub_path": "filament/Bambu Support W @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support W @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Bambu Support W @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Support W @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support W @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Support for ABS @BBL H2C",
-			"sub_path": "filament/Bambu Support for ABS @BBL H2C.json"
-		},
-		{
-			"name": "Bambu Support for ABS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 85A @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 85A @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 85A @BBL H2C",
-			"sub_path": "filament/Bambu TPU 85A @BBL H2C.json"
-		},
-		{
-			"name": "Bambu TPU 90A @BBL A2L",
-			"sub_path": "filament/Bambu TPU 90A @BBL A2L.json"
-		},
-		{
-			"name": "Bambu TPU 90A @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 90A @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 90A @BBL H2C",
-			"sub_path": "filament/Bambu TPU 90A @BBL H2C.json"
-		},
-		{
-			"name": "Bambu TPU 90A @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 95A @BBL A2L",
-			"sub_path": "filament/Bambu TPU 95A @BBL A2L.json"
-		},
-		{
-			"name": "Bambu TPU 95A @BBL H2C",
-			"sub_path": "filament/Bambu TPU 95A @BBL H2C.json"
-		},
-		{
-			"name": "Bambu TPU 95A @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 95A HF @BBL A2L",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L.json"
-		},
-		{
-			"name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU 95A HF @BBL H2C",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL H2C.json"
-		},
-		{
-			"name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU for AMS @BBL A2L",
-			"sub_path": "filament/Bambu TPU for AMS @BBL A2L.json"
-		},
-		{
-			"name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle",
-			"sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle",
-			"sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu TPU for AMS @BBL H2C",
-			"sub_path": "filament/Bambu TPU for AMS @BBL H2C.json"
-		},
-		{
-			"name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @BBL H2C",
-			"sub_path": "filament/Generic ABS @BBL H2C.json"
-		},
-		{
-			"name": "Generic ABS @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic ABS @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @BBL H2C",
-			"sub_path": "filament/Generic ASA @BBL H2C.json"
-		},
-		{
-			"name": "Generic ASA @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic ASA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic BVOH @BBL A2L",
-			"sub_path": "filament/Generic BVOH @BBL A2L.json"
-		},
-		{
-			"name": "Generic BVOH @BBL H2C",
-			"sub_path": "filament/Generic BVOH @BBL H2C.json"
-		},
-		{
-			"name": "Generic BVOH @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic BVOH @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic EVA @BBL A2L",
-			"sub_path": "filament/Generic EVA @BBL A2L.json"
-		},
-		{
-			"name": "Generic EVA @BBL H2C",
-			"sub_path": "filament/Generic EVA @BBL H2C.json"
-		},
-		{
-			"name": "Generic EVA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic EVA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic HIPS @BBL A2L",
-			"sub_path": "filament/Generic HIPS @BBL A2L.json"
-		},
-		{
-			"name": "Generic HIPS @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic HIPS @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic HIPS @BBL H2C",
-			"sub_path": "filament/Generic HIPS @BBL H2C.json"
-		},
-		{
-			"name": "Generic HIPS @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic HIPS @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic HIPS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic HIPS @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PA @BBL H2C",
-			"sub_path": "filament/Generic PA @BBL H2C.json"
-		},
-		{
-			"name": "Generic PA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PA-CF @BBL H2C",
-			"sub_path": "filament/Generic PA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PC @BBL H2C",
-			"sub_path": "filament/Generic PC @BBL H2C.json"
-		},
-		{
-			"name": "Generic PC @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PC @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PC @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PC @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PCTG @BBL A2L",
-			"sub_path": "filament/Generic PCTG @BBL A2L.json"
-		},
-		{
-			"name": "Generic PCTG @BBL H2C",
-			"sub_path": "filament/Generic PCTG @BBL H2C.json"
-		},
-		{
-			"name": "Generic PCTG @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PCTG @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PE @BBL A2L",
-			"sub_path": "filament/Generic PE @BBL A2L.json"
-		},
-		{
-			"name": "Generic PE @BBL H2C",
-			"sub_path": "filament/Generic PE @BBL H2C.json"
-		},
-		{
-			"name": "Generic PE @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PE @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PE-CF @BBL A2L",
-			"sub_path": "filament/Generic PE-CF @BBL A2L.json"
-		},
-		{
-			"name": "Generic PE-CF @BBL H2C",
-			"sub_path": "filament/Generic PE-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PE-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PE-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @BBL A2L",
-			"sub_path": "filament/Generic PETG @BBL A2L.json"
-		},
-		{
-			"name": "Generic PETG @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @BBL H2C",
-			"sub_path": "filament/Generic PETG @BBL H2C.json"
-		},
-		{
-			"name": "Generic PETG @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PETG @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG HF @BBL A2L",
-			"sub_path": "filament/Generic PETG HF @BBL A2L.json"
-		},
-		{
-			"name": "Generic PETG HF @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic PETG HF @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG HF @BBL H2C",
-			"sub_path": "filament/Generic PETG HF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PETG HF @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PETG HF @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG HF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PETG HF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG-CF @BBL A2L",
-			"sub_path": "filament/Generic PETG-CF @BBL A2L.json"
-		},
-		{
-			"name": "Generic PETG-CF @BBL H2C",
-			"sub_path": "filament/Generic PETG-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PETG-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PHA @BBL A2L",
-			"sub_path": "filament/Generic PHA @BBL A2L.json"
-		},
-		{
-			"name": "Generic PHA @BBL H2C",
-			"sub_path": "filament/Generic PHA @BBL H2C.json"
-		},
-		{
-			"name": "Generic PHA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PHA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @BBL A2L",
-			"sub_path": "filament/Generic PLA @BBL A2L.json"
-		},
-		{
-			"name": "Generic PLA @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @BBL H2C",
-			"sub_path": "filament/Generic PLA @BBL H2C.json"
-		},
-		{
-			"name": "Generic PLA @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PLA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA High Speed @BBL A2L",
-			"sub_path": "filament/Generic PLA High Speed @BBL A2L.json"
-		},
-		{
-			"name": "Generic PLA High Speed @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA High Speed @BBL H2C",
-			"sub_path": "filament/Generic PLA High Speed @BBL H2C.json"
-		},
-		{
-			"name": "Generic PLA High Speed @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA High Speed @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA Silk @BBL A2L",
-			"sub_path": "filament/Generic PLA Silk @BBL A2L.json"
-		},
-		{
-			"name": "Generic PLA Silk @BBL H2C",
-			"sub_path": "filament/Generic PLA Silk @BBL H2C.json"
-		},
-		{
-			"name": "Generic PLA Silk @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @BBL A2L",
-			"sub_path": "filament/Generic PLA-CF @BBL A2L.json"
-		},
-		{
-			"name": "Generic PLA-CF @BBL H2C",
-			"sub_path": "filament/Generic PLA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PLA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PP @BBL A2L",
-			"sub_path": "filament/Generic PP @BBL A2L.json"
-		},
-		{
-			"name": "Generic PP @BBL H2C",
-			"sub_path": "filament/Generic PP @BBL H2C.json"
-		},
-		{
-			"name": "Generic PP @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PP @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PP-CF @BBL H2C",
-			"sub_path": "filament/Generic PP-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PP-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PP-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PP-GF @BBL H2C",
-			"sub_path": "filament/Generic PP-GF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PP-GF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PP-GF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PPA-CF @BBL H2C",
-			"sub_path": "filament/Generic PPA-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PPA-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PPA-GF @BBL H2C",
-			"sub_path": "filament/Generic PPA-GF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PPA-GF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PPS @BBL H2C",
-			"sub_path": "filament/Generic PPS @BBL H2C.json"
-		},
-		{
-			"name": "Generic PPS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PPS @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PPS-CF @BBL H2C",
-			"sub_path": "filament/Generic PPS-CF @BBL H2C.json"
-		},
-		{
-			"name": "Generic PPS-CF @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PVA @BBL A2L",
-			"sub_path": "filament/Generic PVA @BBL A2L.json"
-		},
-		{
-			"name": "Generic PVA @BBL A2L 0.2 nozzle",
-			"sub_path": "filament/Generic PVA @BBL A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PVA @BBL H2C",
-			"sub_path": "filament/Generic PVA @BBL H2C.json"
-		},
-		{
-			"name": "Generic PVA @BBL H2C 0.2 nozzle",
-			"sub_path": "filament/Generic PVA @BBL H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PVA @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic PVA @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic TPU @BBL A2L",
-			"sub_path": "filament/Generic TPU @BBL A2L.json"
-		},
-		{
-			"name": "Generic TPU @BBL H2C",
-			"sub_path": "filament/Generic TPU @BBL H2C.json"
-		},
-		{
-			"name": "Generic TPU @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic TPU @BBL H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic TPU for AMS @BBL A2L",
-			"sub_path": "filament/Generic TPU for AMS @BBL A2L.json"
-		},
-		{
-			"name": "Generic TPU for AMS @BBL H2C",
-			"sub_path": "filament/Generic TPU for AMS @BBL H2C.json"
-		},
-		{
-			"name": "Generic TPU for AMS @BBL H2C 0.4 nozzle",
-			"sub_path": "filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -11303,6 +11303,10 @@
 			"name": "Bambu Lab A1 mini 0.4 nozzle",
 			"sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json"
 		},
+		{
+			"name": "Bambu Lab A2L 0.4 nozzle",
+			"sub_path": "machine/Bambu Lab A2L 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Lab H2S 0.4 nozzle",
 			"sub_path": "machine/Bambu Lab H2S 0.4 nozzle.json"
@@ -11331,6 +11335,10 @@
 			"name": "Bambu Lab X1E 0.4 nozzle",
 			"sub_path": "machine/Bambu Lab X1E 0.4 nozzle.json"
 		},
+		{
+			"name": "Bambu Lab H2C 0.4 nozzle",
+			"sub_path": "machine/Bambu Lab H2C 0.4 nozzle.json"
+		},
 		{
 			"name": "Bambu Lab H2D 0.4 nozzle",
 			"sub_path": "machine/Bambu Lab H2D 0.4 nozzle.json"
@@ -11367,6 +11375,18 @@
 			"name": "Bambu Lab A1 mini 0.8 nozzle",
 			"sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu Lab A2L 0.2 nozzle",
+			"sub_path": "machine/Bambu Lab A2L 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab A2L 0.6 nozzle",
+			"sub_path": "machine/Bambu Lab A2L 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab A2L 0.8 nozzle",
+			"sub_path": "machine/Bambu Lab A2L 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu Lab H2S 0.2 nozzle",
 			"sub_path": "machine/Bambu Lab H2S 0.2 nozzle.json"
@@ -11451,6 +11471,18 @@
 			"name": "Bambu Lab X1E 0.8 nozzle",
 			"sub_path": "machine/Bambu Lab X1E 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu Lab H2C 0.2 nozzle",
+			"sub_path": "machine/Bambu Lab H2C 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab H2C 0.6 nozzle",
+			"sub_path": "machine/Bambu Lab H2C 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab H2C 0.8 nozzle",
+			"sub_path": "machine/Bambu Lab H2C 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu Lab H2D 0.2 nozzle",
 			"sub_path": "machine/Bambu Lab H2D 0.2 nozzle.json"
@@ -11486,38 +11518,6 @@
 		{
 			"name": "Bambu Lab X2D 0.8 nozzle",
 			"sub_path": "machine/Bambu Lab X2D 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab A2L 0.4 nozzle",
-			"sub_path": "machine/Bambu Lab A2L 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab A2L 0.2 nozzle",
-			"sub_path": "machine/Bambu Lab A2L 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab A2L 0.6 nozzle",
-			"sub_path": "machine/Bambu Lab A2L 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab A2L 0.8 nozzle",
-			"sub_path": "machine/Bambu Lab A2L 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab H2C 0.4 nozzle",
-			"sub_path": "machine/Bambu Lab H2C 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab H2C 0.2 nozzle",
-			"sub_path": "machine/Bambu Lab H2C 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab H2C 0.6 nozzle",
-			"sub_path": "machine/Bambu Lab H2C 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu Lab H2C 0.8 nozzle",
-			"sub_path": "machine/Bambu Lab H2C 0.8 nozzle.json"
 		}
 	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json
index ecc4aa62f4..5d6b376e47 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"105"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json
index 3d4fbe9c88..703389a687 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json
index 5486b65d44..beba3c51de 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json
index 1881e454f5..f4894e3e6a 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json
index e0696d14fe..5cb61738c8 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json
index d64bb0629e..b94065e44d 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json
index 6a4af4f908..eb1ffaf48c 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json
index ff647879dc..de07353b97 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"70"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json
index fdbaa361f2..f3df226774 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json
index 12849a851d..08ad97161a 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"70"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json
index bdbecc7722..0948d9f9c7 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json
index a466f88b0a..0396c6578d 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json
index a5c78fe215..a0f78bb956 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json
index f32705ba65..3a35d16b29 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json
index fa2c0e9ae0..77a86797f0 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json
index 1dc1796d4b..5327b8a083 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json
index f64767d1e3..1487f567cd 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json
index 1bbfb305b2..789d2bd096 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json
index 99ec158160..aed77a1a1a 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json
index ffe91af773..6e0a0952d5 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json
index 073b96a224..d785327ee7 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json
index b6a2695235..c530f3fa7c 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json
index 7910e3c772..32debd4c18 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -315,6 +323,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"55"
-	],
-	"version": "2.0.0.87"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json
index 13604f5832..88258976f2 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json
index d8a9ca5ca3..afdcb43296 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json
index f4d1beac7d..81d08c4681 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -334,6 +342,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json
index 61d6100a71..0b4e7c3fcd 100644
--- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json	
+++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json	
@@ -58,7 +58,15 @@
 		"Bambu Lab X2D 0.2 nozzle",
 		"Bambu Lab X2D 0.4 nozzle",
 		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
+		"Bambu Lab X2D 0.8 nozzle",
+		"Bambu Lab H2C 0.2 nozzle",
+		"Bambu Lab H2C 0.4 nozzle",
+		"Bambu Lab H2C 0.6 nozzle",
+		"Bambu Lab H2C 0.8 nozzle",
+		"Bambu Lab A2L 0.2 nozzle",
+		"Bambu Lab A2L 0.4 nozzle",
+		"Bambu Lab A2L 0.6 nozzle",
+		"Bambu Lab A2L 0.8 nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
@@ -335,6 +343,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json
index 6ebecc0ecf..33cf76e05b 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json	
@@ -11,5 +11,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "N1",
-	"default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M"
+	"default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M;Bambu PLA Basic @BBL A1M 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1.json b/resources/profiles/BBL/machine/Bambu Lab A1.json
index efade2a7d2..1ce5f24296 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "N2S",
-	"default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1"
+	"default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1;Bambu PLA Basic @BBL A1 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L.json b/resources/profiles/BBL/machine/Bambu Lab A2L.json
index b9ad344d22..62a9a0fddf 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A2L.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A2L.json	
@@ -13,5 +13,5 @@
 	"model_id": "N9",
 	"not_support_bed_type": "Cool Plate",
 	"use_double_extruder_default_texture": "true",
-	"default_materials": "Bambu PLA Matte @BBL A2L;Bambu PLA Basic @BBL A2L;Bambu PLA Silk @BBL A2L;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L"
+	"default_materials": "Bambu PLA Matte @BBL A2L 0.4 nozzle;Bambu PLA Basic @BBL A2L 0.4 nozzle;Bambu PLA Silk @BBL A2L 0.4 nozzle;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L;Bambu PLA Basic @BBL A2L 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C.json b/resources/profiles/BBL/machine/Bambu Lab H2C.json
index 92645a5933..b9734a34c5 100644
--- a/resources/profiles/BBL/machine/Bambu Lab H2C.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab H2C.json	
@@ -12,5 +12,5 @@
 	"machine_tech": "FFF",
 	"model_id": "O1C2",
 	"not_support_bed_type": "Cool Plate;Smooth PEI Plate / High Temp Plate",
-	"default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C"
+	"default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C;Bambu PLA Basic @BBL H2C 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json
index 8fd12972e7..d2be50fe67 100644
--- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json	
@@ -11,5 +11,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "O1E",
-	"default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP;Bambu PETG Basic @BBL H2DP;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP"
+	"default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP 0.4 nozzle;Bambu PETG Basic @BBL H2DP 0.4 nozzle;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP 0.4 nozzle;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP 0.4 nozzle;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP;Bambu PLA Basic @BBL H2DP 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D.json b/resources/profiles/BBL/machine/Bambu Lab H2D.json
index 9a277c4b7e..a264365c94 100644
--- a/resources/profiles/BBL/machine/Bambu Lab H2D.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab H2D.json	
@@ -12,5 +12,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "O1D",
-	"default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D;Bambu PETG Basic @BBL H2D;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D"
+	"default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D 0.4 nozzle;Bambu PETG Basic @BBL H2D 0.4 nozzle;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D 0.4 nozzle;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D 0.4 nozzle;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D;Bambu PLA Basic @BBL H2D 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S.json b/resources/profiles/BBL/machine/Bambu Lab H2S.json
index 11c2cde471..2ead7abc09 100644
--- a/resources/profiles/BBL/machine/Bambu Lab H2S.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab H2S.json	
@@ -14,5 +14,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "O1S",
-	"default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S"
+	"default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S;Bambu PLA Basic @BBL H2S 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P.json b/resources/profiles/BBL/machine/Bambu Lab P1P.json
index c5062699d6..7365599b1c 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "C11",
-	"default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C"
+	"default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL P1P 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json
index f5e81affe6..76d1a92839 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "C12",
-	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C"
+	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S.json b/resources/profiles/BBL/machine/Bambu Lab P2S.json
index 19939adeff..869cb56016 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P2S.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P2S.json	
@@ -12,5 +12,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "N7",
-	"default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle"
+	"default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle;Bambu PLA Basic @BBL P2S 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json
index 6a504195c7..a3a89c14de 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "BL-P001",
-	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C"
+	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1.json b/resources/profiles/BBL/machine/Bambu Lab X1.json
index 843ddcf3a7..23a90ded95 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "BL-P002",
-	"default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C"
+	"default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E.json b/resources/profiles/BBL/machine/Bambu Lab X1E.json
index d0c5f3660c..0c4d6faf76 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1E.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1E.json	
@@ -9,5 +9,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "C13",
-	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C"
+	"default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D.json b/resources/profiles/BBL/machine/Bambu Lab X2D.json
index df2ca2c45b..95e65f3b1e 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X2D.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X2D.json	
@@ -14,5 +14,5 @@
 	"machine_tech": "FFF",
 	"model_id": "N6",
 	"not_support_bed_type": "Cool Plate",
-	"default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D;Bambu PC @BBL X2D 0.4 nozzle"
+	"default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D;Bambu PC @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D 0.2 nozzle"
 }
diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json
index f793f3bc1d..b10072a284 100644
--- a/resources/profiles/BBL/machine/fdm_machine_common.json
+++ b/resources/profiles/BBL/machine/fdm_machine_common.json
@@ -137,7 +137,6 @@
 	],
 	"scan_first_layer": "0",
 	"enable_power_loss_recovery": "printer_configuration",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_cooling_filter": "0",
diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json
index 7a2803376a..7eae54fd49 100644
--- a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json
index 49cc379d96..9ccca5434e 100644
--- a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json
index 946d06033d..80edd032c6 100644
--- a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -92,7 +88,6 @@
 		"Direct Drive High Flow"
 	],
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json
index 904a4c36b3..b1bfc9052a 100644
--- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json
index fb11c1a4bf..0c9ed0c2d3 100644
--- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json
index 4894472048..60ba1abfa7 100644
--- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"450",
 		"450"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json
index 18c97c02a0..c87e2d5d0e 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json	
@@ -33,7 +33,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"travel_acceleration": [
 		"8000"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json
index 1c1c67efdd..1d1eb841da 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json	
@@ -48,7 +48,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": [
 		"150"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json
index a7b0dd5cdf..521f97aad2 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json	
@@ -124,10 +124,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -144,7 +140,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json
index 74424205a8..d30d85cdc6 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json	
@@ -120,10 +120,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -140,7 +136,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json
index 6dffdd807a..1d72dc8bc2 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json
index 6449810abc..ab50f11c4d 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json
index ef8582cf08..fba6cdf18b 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json	
@@ -80,10 +80,6 @@
 		"20",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -94,7 +90,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": [
 		"100",
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json
index 33bcdcb417..89bca9df5b 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json	
@@ -79,10 +79,6 @@
 		"20",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"150",
 		"150"
 	],
-	"smooth_coefficient": "1",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json
index 2d4a5a4aa9..9ecb07315c 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -92,7 +88,6 @@
 		"Direct Drive High Flow"
 	],
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json
index d43fa0b542..46391c740a 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -95,7 +91,6 @@
 		"150",
 		"150"
 	],
-	"smooth_coefficient": "150",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json
index 1ac71a0e27..748fa47e60 100644
--- a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json
index e63c318451..de2043ca5f 100644
--- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json
index 9e79020dde..88b2bc08df 100644
--- a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json
index dda11fcea8..5dcdb588f1 100644
--- a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -92,7 +88,6 @@
 		"Direct Drive High Flow"
 	],
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json
index 3eeeae65e0..c122c78e09 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json	
@@ -30,9 +30,6 @@
 	"overhang_4_4_speed": [
 		"35"
 	],
-	"overhang_totally_speed": [
-		"25"
-	],
 	"prime_tower_brim_width": "-1",
 	"slowdown_end_acc": [
 		"1000"
@@ -40,7 +37,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"support_line_width": "0.4",
 	"travel_acceleration": [
 		"8000"
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json
index 594822c2fa..698c0ba106 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"100",
 		"100"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_flat_ironing": "1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -117,7 +113,6 @@
 		"80",
 		"80"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
index 9d65e320a6..8c7c9415a1 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json
index 8d545a01f4..51fcbc71d4 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json	
@@ -80,10 +80,6 @@
 		"20",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -92,7 +88,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json
index e1078c5844..5145c45b42 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json
index e1fbd88049..3fd94d41ca 100644
--- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json	
@@ -27,7 +27,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json
index 62b5351a18..f35eccf500 100644
--- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json	
@@ -123,10 +123,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -143,7 +139,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json
index e1b48ac5b8..f7a7639857 100644
--- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"20",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -93,7 +89,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json
index 1a99892c5f..83afb88fd8 100644
--- a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json
index ee9683d868..96047bf831 100644
--- a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json
index 24ff340202..1758049a79 100644
--- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"430",
 		"430"
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json
index dd64b185c9..9b7a3a9504 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json	
@@ -48,7 +48,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": [
 		"180"
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json
index eadb61d48f..99aa118b84 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json	
@@ -120,10 +120,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -140,7 +136,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json
index ea4c5fc5a0..6cdae36ed1 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json
index d1464e4305..6f86d4824b 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json	
@@ -79,10 +79,6 @@
 		"20",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"180",
 		"180"
 	],
-	"smooth_coefficient": "1",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json
index d7784db216..94f8634116 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -95,7 +91,6 @@
 		"180",
 		"180"
 	],
-	"smooth_coefficient": "150",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json
index d3640ed715..b0186048dd 100644
--- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json
index 218a787534..437f17bf44 100644
--- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json
index 54ed08993e..8e36589ccd 100644
--- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json
index 9b6218b86c..5c75e20bdd 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json	
@@ -48,7 +48,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": [
 		"200"
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json
index 890ce852c5..903eb3749d 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json	
@@ -120,10 +120,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -140,7 +136,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json
index 38b6bb521b..b7b7d2bd55 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json
index e8c99baf95..65e4674832 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -99,7 +95,6 @@
 		"200",
 		"200"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json
index 4906acb367..0e281022a3 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -95,7 +91,6 @@
 		"200",
 		"200"
 	],
-	"smooth_coefficient": "150",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json
index d9b1741a52..4f536ba2cf 100644
--- a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json
index 6d73a50989..867d939dce 100644
--- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"330",
 		"330"
diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json
index cfe8b823aa..b3eef2ee33 100644
--- a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json	
@@ -33,7 +33,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json
index 34db04a866..ec829b7ee4 100644
--- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -129,7 +125,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json
index 3936f388e6..ba295d7a52 100644
--- a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json
index 2a76dd472d..8995eeb48f 100644
--- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json	
@@ -21,7 +21,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json
index afb20240c5..c0061a0b41 100644
--- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json	
@@ -124,10 +124,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -144,7 +140,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json
index 1357450ea1..74dccd56d7 100644
--- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json
index f763af69b5..9598dfcfea 100644
--- a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json
index 2d4396b050..b865adf071 100644
--- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json
index 86e4fdd103..d7c3d6468d 100644
--- a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json	
@@ -53,7 +53,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_density": "25%",
 	"sparse_infill_speed": [
 		"200"
diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json
index 6c26a52279..0e6064052d 100644
--- a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json	
@@ -119,10 +119,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -139,7 +135,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json
index fc29792372..d6170c2c44 100644
--- a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"200",
 		"200"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"slowdown_start_height": [
 		"0",
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json
index b26ff6f9e6..9eee3748dc 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json	
@@ -33,7 +33,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json
index ea157f757c..d807f16450 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_flat_ironing": "1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -92,7 +88,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"350",
 		"600"
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json
index c3fec1fa83..2d96c4fc4d 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json
index 2c4de0d7bc..b1696e1fa5 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -92,7 +88,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"270",
 		"600"
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json
index 57646a32c1..c5528cf17a 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"270",
 		"270"
diff --git a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json
index d41f51faf1..cee984c300 100644
--- a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"print_extruder_id": [
 		"1",
@@ -125,7 +121,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json
index 9008bd79e2..932890cad3 100644
--- a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json
index dcb64e1ec5..3cb1ff5984 100644
--- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_density": "25%",
 	"skeleton_infill_density": "25%",
 	"skin_infill_density": "25%",
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json
index 74c9994732..fe0d6589ac 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json	
@@ -21,7 +21,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json
index 83900ad084..d776a52d25 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json	
@@ -21,7 +21,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json
index 0cdc5bb25e..373149f7ee 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json	
@@ -124,10 +124,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -144,7 +140,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json
index 098cce840c..f9b4a1ab8d 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json	
@@ -124,10 +124,6 @@
 		"50",
 		"50"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -144,7 +140,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json
index 7b7f633040..6ec3215684 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json	
@@ -80,10 +80,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json
index 4a303b27d9..1a925b86c3 100644
--- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json	
@@ -80,10 +80,6 @@
 		"50",
 		"50"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json
index 6d716dfdbf..f59e06d60b 100644
--- a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json
index 17cd1d829c..5a32b21d55 100644
--- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"230",
 		"230"
diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json
index 963d8945ad..dc80b360fa 100644
--- a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json
index 5cae9a0bf0..a8eb1b516b 100644
--- a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json
index f99e4ec24f..920c0743fd 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json	
@@ -33,7 +33,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json
index 1807668e08..11717ad604 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json	
@@ -118,10 +118,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -138,7 +134,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json
index a6dae0a6dd..b0655b0f55 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json	
@@ -79,10 +79,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -97,7 +93,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json
index 2cf71d9ad9..7b3f2d2293 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json
index 1a639b0ad3..9f3bd73c59 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json
index ca4b6a55c1..92fadb9054 100644
--- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json
index d3560f7224..255d2a806a 100644
--- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
@@ -78,10 +78,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -90,7 +86,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"200",
 		"200"
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json
index 4fa0523bb4..800dad889c 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json	
@@ -30,7 +30,6 @@
 	"slowdown_start_speed": [
 		"500"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json
index c3f1962e55..1e4493c397 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"500"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_flat_ironing": "1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -141,7 +137,6 @@
 		"80",
 		"80"
 	],
-	"smooth_coefficient": "4",
 	"travel_speed": [
 		"1000",
 		"1000"
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json
index b8993d012d..66a2c3a007 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json
index 9f4c86e17a..b10573aa5e 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json	
@@ -81,10 +81,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -93,7 +89,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"270",
 		"600"
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json
index a960492fdc..f4f72db014 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json
index a76b7f9bd5..7b04010bf2 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json
index fb8c7de72b..4394c363d0 100644
--- a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
index ab0e52733c..99b2f43361 100644
--- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -94,7 +90,6 @@
 	"sparse_infill_density": "25%",
 	"skeleton_infill_density": "25%",
 	"skin_infill_density": "25%",
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json
index 20b865e2cd..1e60033ace 100644
--- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json	
@@ -21,7 +21,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json
index c7c44a1b1f..cd60ebe8af 100644
--- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json	
@@ -124,10 +124,6 @@
 		"50",
 		"50"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -144,7 +140,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json
index ffa69df36b..f0049b42e3 100644
--- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json	
@@ -80,10 +80,6 @@
 		"50",
 		"50"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_brim_width": "-1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -98,7 +94,6 @@
 		"270",
 		"270"
 	],
-	"smooth_coefficient": "4",
 	"slowdown_start_height": [
 		"0",
 		"0"
diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json
index 84d042d8b0..8100421664 100644
--- a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json
index b8f052e179..304b99974a 100644
--- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json
index 6a34e7b93b..a36c99978a 100644
--- a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json
index bdae37307f..9103a177a7 100644
--- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json
index c0af67dba9..74c452d588 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json	
@@ -21,7 +21,6 @@
 	"slowdown_end_height": [
 		"225"
 	],
-	"smooth_coefficient": "4",
 	"travel_acceleration": [
 		"8000"
 	],
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json
index 2c4d4b26e5..9f8035e903 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"500"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"prime_tower_flat_ironing": "1",
 	"prime_tower_width": "60",
 	"print_extruder_id": [
@@ -141,7 +137,6 @@
 		"80",
 		"80"
 	],
-	"smooth_coefficient": "4",
 	"travel_speed": [
 		"1000",
 		"1000"
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json
index 74ab7c414e..b6596c47d5 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json
index e1fe009797..eee70ed075 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json	
@@ -81,10 +81,6 @@
 		"50",
 		"50"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -93,7 +89,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"270",
 		"600"
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json
index ce865a363b..dabf9e5308 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json
index 8777997db3..f15e9e7a91 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json
index 54d9bb8666..e4a31d3d12 100644
--- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json
index f136450576..ebc423cf93 100644
--- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json
index 31ede55d0c..cf788c3832 100644
--- a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json
index 62122ff25d..12de9a8108 100644
--- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json
index e98fa844d7..1b4d5ee0c3 100644
--- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json
index 255af5a125..2745935c6c 100644
--- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
@@ -79,10 +79,6 @@
 		"120",
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1"
@@ -91,7 +87,6 @@
 		"Direct Drive Standard",
 		"Direct Drive High Flow"
 	],
-	"smooth_coefficient": "150",
 	"sparse_infill_speed": [
 		"100",
 		"100"
diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json
index 6f715882cc..5af292b424 100644
--- a/resources/profiles/BBL/process/fdm_process_common.json
+++ b/resources/profiles/BBL/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"bottom_shell_layers": "3",
 	"bottom_color_penetration_layers": "3",
 	"bottom_shell_thickness": "0",
@@ -47,7 +46,6 @@
 		"40"
 	],
 	"interface_shells": "0",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": [
 		"40"
@@ -77,9 +75,6 @@
 	"outer_wall_speed": [
 		"120"
 	],
-	"overhang_totally_speed": [
-		"10"
-	],
 	"override_filament_scarf_seam_setting": "0",
 	"pre_start_fan_time": [
 		"0"
@@ -105,7 +100,6 @@
 	"skirt_distance": "2",
 	"skirt_height": "1",
 	"skirt_loops": "0",
-	"smooth_coefficient": "80",
 	"sparse_infill_density": "15%",
 	"skeleton_infill_density": "15%",
 	"skin_infill_density": "15%",
diff --git a/resources/profiles/BBL/process/fdm_process_dual_common.json b/resources/profiles/BBL/process/fdm_process_dual_common.json
index 95a58bfb78..b247f2ffb1 100644
--- a/resources/profiles/BBL/process/fdm_process_dual_common.json
+++ b/resources/profiles/BBL/process/fdm_process_dual_common.json
@@ -113,12 +113,6 @@
 		"10",
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
 	"print_extruder_id": [
 		"1",
 		"1",
@@ -180,7 +174,6 @@
 		"0",
 		"0"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_acceleration": [
 		"100%",
 		"100%",
diff --git a/resources/profiles/BIQU.json b/resources/profiles/BIQU.json
index 6c28578e82..2dd4115290 100644
--- a/resources/profiles/BIQU.json
+++ b/resources/profiles/BIQU.json
@@ -1,6 +1,6 @@
 {
 	"name": "BIQU",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "BIQU configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json b/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json
index cc0e00d7e0..93ad734a32 100644
--- a/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json	
+++ b/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json	
@@ -134,7 +134,6 @@
 		"40"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE\n",
diff --git a/resources/profiles/BIQU/machine/fdm_biqu_common.json b/resources/profiles/BIQU/machine/fdm_biqu_common.json
index 45c676c60b..8adf13d5f9 100644
--- a/resources/profiles/BIQU/machine/fdm_biqu_common.json
+++ b/resources/profiles/BIQU/machine/fdm_biqu_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/BIQU/machine/fdm_klipper_common.json b/resources/profiles/BIQU/machine/fdm_klipper_common.json
index ad76cd3c5b..5ec9283827 100644
--- a/resources/profiles/BIQU/machine/fdm_klipper_common.json
+++ b/resources/profiles/BIQU/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"40"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE\n",
diff --git a/resources/profiles/BIQU/machine/fdm_machine_common.json b/resources/profiles/BIQU/machine/fdm_machine_common.json
index 22ba444121..5355d94467 100644
--- a/resources/profiles/BIQU/machine/fdm_machine_common.json
+++ b/resources/profiles/BIQU/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
 	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
diff --git a/resources/profiles/BIQU/process/fdm_process_biqu_common.json b/resources/profiles/BIQU/process/fdm_process_biqu_common.json
index 901b90ae08..b2aebda8a5 100644
--- a/resources/profiles/BIQU/process/fdm_process_biqu_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_biqu_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/BIQU/process/fdm_process_common.json b/resources/profiles/BIQU/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/BIQU/process/fdm_process_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
index a5e106f0ed..fcd275537c 100644
--- a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_biqu_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Blocks.json b/resources/profiles/Blocks.json
index f8243c252d..f24bcb81da 100644
--- a/resources/profiles/Blocks.json
+++ b/resources/profiles/Blocks.json
@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Blocks/machine/fdm_klipper_common.json b/resources/profiles/Blocks/machine/fdm_klipper_common.json
index 1756ac178a..5372b42547 100644
--- a/resources/profiles/Blocks/machine/fdm_klipper_common.json
+++ b/resources/profiles/Blocks/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"35"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "CHANGE_FILAMENT",
 	"machine_pause_gcode": "PAUSE",
diff --git a/resources/profiles/Blocks/machine/fdm_machine_common.json b/resources/profiles/Blocks/machine/fdm_machine_common.json
index 27cde99c12..e250ba2e3c 100644
--- a/resources/profiles/Blocks/machine/fdm_machine_common.json
+++ b/resources/profiles/Blocks/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json
index 86f9cb5adb..315256dcab 100644
--- a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json
index ae773410b3..ca6facb720 100644
--- a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json
index 7c02d847bc..b80b051a71 100644
--- a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json
index 32beb61fe9..5c88e00c2a 100644
--- a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json	
@@ -41,7 +41,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json
index d9d6895c3d..edb1bfcc2d 100644
--- a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json
index 6744554909..d2f853b638 100644
--- a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json
index 0b3b324664..dd6b60d371 100644
--- a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json	
@@ -38,7 +38,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json
index 704d355221..9d909c1dd4 100644
--- a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json
index 05c4c06e22..60c6eae19e 100644
--- a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json	
@@ -38,7 +38,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json
index 18d38c7c34..f28a975208 100644
--- a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json
index b4359ae990..7b94febc1c 100644
--- a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json	
@@ -38,7 +38,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json
index 6e286f3309..d49633e89d 100644
--- a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json	
@@ -38,7 +38,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json
index e0d5a486de..a0e9121ceb 100644
--- a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json	
+++ b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json	
@@ -37,7 +37,6 @@
 	"support_speed": "300",
 	"detect_overhang_wall": "1",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
diff --git a/resources/profiles/Blocks/process/fdm_process_blocks_common.json b/resources/profiles/Blocks/process/fdm_process_blocks_common.json
index 2e9e81b262..4eac1c83d7 100644
--- a/resources/profiles/Blocks/process/fdm_process_blocks_common.json
+++ b/resources/profiles/Blocks/process/fdm_process_blocks_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json
index 51ecf6c306..ef7dcc12bf 100644
--- a/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json	
+++ b/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"brim_width": "5",
diff --git a/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json
index 10089234ee..6a32e4abb4 100644
--- a/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json	
+++ b/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json	
@@ -18,7 +18,6 @@
 	"internal_solid_infill_line_width": "0.82",
 	"support_line_width": "0.82",
 	"top_surface_line_width": "0.82",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"brim_width": "5",
diff --git a/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json
index c1e7f74673..a09804b95d 100644
--- a/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json	
+++ b/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json	
@@ -14,7 +14,6 @@
 	"internal_solid_infill_line_width": "1.02",
 	"support_line_width": "1.02",
 	"top_surface_line_width": "1.02",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"brim_width": "5",
diff --git a/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json
index 292d413e96..4764a600fd 100644
--- a/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json	
+++ b/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json	
@@ -14,7 +14,6 @@
 	"internal_solid_infill_line_width": "1.22",
 	"support_line_width": "1.22",
 	"top_surface_line_width": "1.22",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"brim_width": "5",
diff --git a/resources/profiles/Blocks/process/fdm_process_common.json b/resources/profiles/Blocks/process/fdm_process_common.json
index e6614cb911..2caa139d1f 100644
--- a/resources/profiles/Blocks/process/fdm_process_common.json
+++ b/resources/profiles/Blocks/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/CONSTRUCT3D.json b/resources/profiles/CONSTRUCT3D.json
index efc7c78972..55845903b0 100644
--- a/resources/profiles/CONSTRUCT3D.json
+++ b/resources/profiles/CONSTRUCT3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "CONSTRUCT3D",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Construct3D configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json b/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json
index 7459504984..ff5aca073b 100644
--- a/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json
+++ b/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json
@@ -22,7 +22,6 @@
 	"printhost_port": "",
 	"printhost_ssl_ignore_revoke": "0",
 	"printhost_user": "",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"8000"
 	],
@@ -121,7 +120,6 @@
 	"thumbnails": [
 		"160x160"
 	],
-	"z_lift_type": "Auto Lift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
diff --git a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json
index baaf57a50b..1378aca57f 100644
--- a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json
+++ b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -81,7 +80,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Chuanying.json b/resources/profiles/Chuanying.json
index f32b4f84ae..5434e13bb8 100644
--- a/resources/profiles/Chuanying.json
+++ b/resources/profiles/Chuanying.json
@@ -1,7 +1,7 @@
 {
 	"name": "Chuanying",
 	"url": "",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Chuanying configurations",
 	"machine_model_list": [
@@ -89,14 +89,14 @@
 			"name": "Generic PETG @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PETG @Chuanying X1 0.25 Nozzle.json"
 		},
-		{
-			"name": "Generic PVA @Chuanying",
-			"sub_path": "filament/Generic PVA @Chuanying.json"
-		},
 		{
 			"name": "Generic PLA @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PLA @Chuanying X1 0.25 Nozzle.json"
 		},
+		{
+			"name": "Generic PVA @Chuanying",
+			"sub_path": "filament/Generic PVA @Chuanying.json"
+		},
 		{
 			"name": "Generic PLA-Silk @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json"
diff --git a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json
index f5cc9c8419..3196464cc2 100644
--- a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Chuanying",
-	"inherits": "fdm_filament_asa",
 	"renamed_from": "Chuanying Generic ASA",
+	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "39OBrSE3RugtTPPR",
 	"filament_id": "OFLPAxz3",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"0"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"2"
diff --git a/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json b/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json
index 4d8edd7298..25910a1f55 100644
--- a/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic HIPS @Chuanying",
-	"inherits": "Generic ABS @Chuanying",
 	"renamed_from": "Chuanying Generic HIPS",
+	"inherits": "Generic ABS @Chuanying",
 	"from": "system",
 	"setting_id": "TV3UktlnP0aTLsOZ",
 	"filament_id": "OFsFon5l",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"HIPS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json
index 8b0529814e..c209ab1022 100644
--- a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json	
@@ -1,15 +1,12 @@
 {
 	"type": "filament",
 	"name": "Generic HS PLA @Chuanying",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Chuanying Generic HS PLA",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "uw7SQpFnhFiO8i1N",
 	"filament_id": "OFvxghTE",
 	"instantiation": "true",
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -84,9 +81,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -159,9 +153,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json
index 85d42dad84..e8c812c7d5 100644
--- a/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG-CF10 @Chuanying",
-	"inherits": "fdm_filament_pet",
 	"renamed_from": "Chuanying Generic PETG-CF10",
+	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "Pr70SnbXDjOF9EvU",
 	"filament_id": "OFO5djrM",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json
index c76c4de977..46be8ddf90 100644
--- a/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA-CF10 @Chuanying",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Chuanying Generic PLA-CF10",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "I4FjaXNkWl8Mr4ie",
 	"filament_id": "OFX2zcrM",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -87,9 +84,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -162,9 +156,6 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json
index a38af95d65..0c6abd3c0f 100644
--- a/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PVA @Chuanying",
-	"inherits": "Generic PLA @Chuanying",
 	"renamed_from": "Chuanying Generic PVA",
+	"inherits": "Generic PLA @Chuanying",
 	"from": "system",
 	"setting_id": "UTutnObeQqlZxe0B",
 	"filament_id": "OFDvXujf",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"1"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"PVA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json b/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json
index 9bea6c388d..b9a325ce8c 100644
--- a/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json	
+++ b/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic TPU @Chuanying",
-	"inherits": "fdm_filament_tpu",
 	"renamed_from": "Chuanying Generic TPU",
+	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "gYsq1HqkgyfmVpvz",
 	"filament_id": "OFgbpcy9",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Chuanying/machine/Chuanying X1.json b/resources/profiles/Chuanying/machine/Chuanying X1.json
index 9e9c3f015d..c62df68589 100644
--- a/resources/profiles/Chuanying/machine/Chuanying X1.json	
+++ b/resources/profiles/Chuanying/machine/Chuanying X1.json	
@@ -8,5 +8,5 @@
 	"bed_model": "chuanying_x1_buildplate_model.STL",
 	"bed_texture": "chuanying_x1_buildplate_texture.svg",
 	"hotend_model": "chuanying_x1_hotend.STL",
-	"default_materials": "Generic PETG @Chuanying;Generic PLA @Chuanying"
+	"default_materials": "Generic PETG @Chuanying;Generic PLA @Chuanying;Generic PLA @Chuanying X1 0.25 Nozzle"
 }
diff --git a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
index 41d7339cf0..406b6045d0 100644
--- a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25",
diff --git a/resources/profiles/Chuanying/machine/fdm_klipper_common.json b/resources/profiles/Chuanying/machine/fdm_klipper_common.json
index 16fb20b900..93631dfa17 100644
--- a/resources/profiles/Chuanying/machine/fdm_klipper_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_klipper_common.json
@@ -116,8 +116,6 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"z_lift_type": "NormalLift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25",
diff --git a/resources/profiles/Chuanying/machine/fdm_machine_common.json b/resources/profiles/Chuanying/machine/fdm_machine_common.json
index a751c264bb..3adc42a1ff 100644
--- a/resources/profiles/Chuanying/machine/fdm_machine_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "0.20mm Standard @Chuanying X1",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json
index 82e196aa1e..e4ad2518a3 100644
--- a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json
+++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json
@@ -11,7 +11,6 @@
 	"gap_infill_speed": "200",
 	"sparse_infill_speed": "270",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"internal_solid_infill_acceleration": "7000",
 	"accel_to_decel_enable": "0",
diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json
index 1a722cc07c..e2c36526ce 100644
--- a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json
+++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json
@@ -19,7 +19,6 @@
 	"top_surface_speed": "120",
 	"gap_infill_speed": "150",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"internal_solid_infill_acceleration": "7000",
 	"accel_to_decel_enable": "0",
diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json
index 6254ffd087..ccad22dca3 100644
--- a/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json
+++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "10000",
 	"inner_wall_acceleration": "5000",
diff --git a/resources/profiles/Chuanying/process/fdm_process_common.json b/resources/profiles/Chuanying/process/fdm_process_common.json
index 362b69213e..fc96799afe 100644
--- a/resources/profiles/Chuanying/process/fdm_process_common.json
+++ b/resources/profiles/Chuanying/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Co Print.json b/resources/profiles/Co Print.json
index e6f9fe967c..2e1ad809eb 100644
--- a/resources/profiles/Co Print.json	
+++ b/resources/profiles/Co Print.json	
@@ -1,6 +1,6 @@
 {
 	"name": "Co Print",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "CoPrint configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json b/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json
index 2a8510b3ab..5a6c5287c0 100644
--- a/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json	
+++ b/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @CoPrint",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "CoPrint Generic PLA",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "9tNsM3FhIDgKJ05R",
 	"filament_id": "OFDSrzZ8",
@@ -10,12 +10,6 @@
 	"filament_vendor": [
 		"Generic"
 	],
-	"filament_load_time": [
-		"9.75"
-	],
-	"filament_unload_time": [
-		"9.75"
-	],
 	"compatible_printers": [
 		"Co Print ChromaSet 0.4 nozzle",
 		"Co Print ChromaSet 0.4 nozzle - Ender-3 V3",
diff --git a/resources/profiles/Co Print/filament/fdm_filament_pla.json b/resources/profiles/Co Print/filament/fdm_filament_pla.json
index 203e643a85..d83834504f 100644
--- a/resources/profiles/Co Print/filament/fdm_filament_pla.json	
+++ b/resources/profiles/Co Print/filament/fdm_filament_pla.json	
@@ -173,12 +173,6 @@
 	"filament_unloading_speed": [
 		"90"
 	],
-	"filament_load_time": [
-		"9.75"
-	],
-	"filament_unload_time": [
-		"9.75"
-	],
 	"filament_toolchange_delay": [
 		"0"
 	],
diff --git a/resources/profiles/Co Print/machine/fdm_machine_common.json b/resources/profiles/Co Print/machine/fdm_machine_common.json
index 4b04bfff04..2d0acb2170 100644
--- a/resources/profiles/Co Print/machine/fdm_machine_common.json	
+++ b/resources/profiles/Co Print/machine/fdm_machine_common.json	
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Co Print/process/fdm_process_common.json b/resources/profiles/Co Print/process/fdm_process_common.json
index 5d6760a85b..72aa53a2a2 100644
--- a/resources/profiles/Co Print/process/fdm_process_common.json	
+++ b/resources/profiles/Co Print/process/fdm_process_common.json	
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"bridge_flow": "0.9031",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Co Print/process/fdm_process_coprint_common.json b/resources/profiles/Co Print/process/fdm_process_coprint_common.json
index c6d5478a6d..6c1b1a99ee 100644
--- a/resources/profiles/Co Print/process/fdm_process_coprint_common.json	
+++ b/resources/profiles/Co Print/process/fdm_process_coprint_common.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"bridge_flow": "0.9031",
 	"bridge_speed": "25",
diff --git a/resources/profiles/CoLiDo.json b/resources/profiles/CoLiDo.json
index d0c395b348..f27623c7bc 100644
--- a/resources/profiles/CoLiDo.json
+++ b/resources/profiles/CoLiDo.json
@@ -1,6 +1,6 @@
 {
 	"name": "CoLiDo",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "CoLiDo configurations",
 	"machine_model_list": [
@@ -196,6 +196,10 @@
 			"name": "Generic ABS @CoLiDo X16",
 			"sub_path": "filament/Generic ABS @CoLiDo X16.json"
 		},
+		{
+			"name": "CoLiDo PETG @CoLiDo SR1",
+			"sub_path": "filament/CoLiDo PETG @CoLiDo SR1.json"
+		},
 		{
 			"name": "Generic PETG @CoLiDo DIY 4.0",
 			"sub_path": "filament/Generic PETG @CoLiDo DIY 4.0.json"
@@ -204,18 +208,6 @@
 			"name": "Generic PETG @CoLiDo X16",
 			"sub_path": "filament/Generic PETG @CoLiDo X16.json"
 		},
-		{
-			"name": "CoLiDo PETG @CoLiDo SR1",
-			"sub_path": "filament/CoLiDo PETG @CoLiDo SR1.json"
-		},
-		{
-			"name": "Generic PLA @CoLiDo DIY 4.0",
-			"sub_path": "filament/Generic PLA @CoLiDo DIY 4.0.json"
-		},
-		{
-			"name": "Generic PLA @CoLiDo X16",
-			"sub_path": "filament/Generic PLA @CoLiDo X16.json"
-		},
 		{
 			"name": "CoLiDo PLA @CoLiDo SR1",
 			"sub_path": "filament/CoLiDo PLA @CoLiDo SR1.json"
@@ -228,6 +220,14 @@
 			"name": "CoLiDo PLA+ @CoLiDo DIY 4.0 V2",
 			"sub_path": "filament/CoLiDo PLA+ @CoLiDo DIY 4.0 V2.json"
 		},
+		{
+			"name": "Generic PLA @CoLiDo DIY 4.0",
+			"sub_path": "filament/Generic PLA @CoLiDo DIY 4.0.json"
+		},
+		{
+			"name": "Generic PLA @CoLiDo X16",
+			"sub_path": "filament/Generic PLA @CoLiDo X16.json"
+		},
 		{
 			"name": "Generic TPU @CoLiDo DIY 4.0",
 			"sub_path": "filament/Generic TPU @CoLiDo DIY 4.0.json"
diff --git a/resources/profiles/CoLiDo/filament/fdm_filament_pla.json b/resources/profiles/CoLiDo/filament/fdm_filament_pla.json
index 5939811113..92db5ad83c 100644
--- a/resources/profiles/CoLiDo/filament/fdm_filament_pla.json
+++ b/resources/profiles/CoLiDo/filament/fdm_filament_pla.json
@@ -85,9 +85,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -163,9 +160,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json
index 8e9b4b34c5..b02f431b3e 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json	
@@ -189,7 +189,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json
index bbecec1d48..3c35344e79 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json	
@@ -203,7 +203,6 @@
 		"20"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json
index 228580eece..4110cbe15d 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json	
@@ -189,7 +189,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
index 25eeb1c066..76dbed1936 100644
--- a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
+++ b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
@@ -117,14 +117,13 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
 		"1"
 	],
 	"default_filament_profile": [
-		"My Generic ABS"
+		"Generic ABS @CoLiDo X16"
 	],
 	"default_print_profile": "0.20mm Standard @MyKlipper",
 	"bed_exclude_area": [
diff --git a/resources/profiles/CoLiDo/machine/fdm_machine_common.json b/resources/profiles/CoLiDo/machine/fdm_machine_common.json
index d4a5c3be25..fbe40f97e3 100644
--- a/resources/profiles/CoLiDo/machine/fdm_machine_common.json
+++ b/resources/profiles/CoLiDo/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/CoLiDo/process/fdm_process_colido_common.json b/resources/profiles/CoLiDo/process/fdm_process_colido_common.json
index 86621b85e2..ac0b89ecf6 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_colido_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_colido_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json
index b1a9fbe2b2..ade45d3c30 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json
index 63cb950583..89f7687d09 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json
@@ -38,7 +38,6 @@
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "200",
 	"exclude_object": "1",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -103,7 +102,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json
index ab06f6a756..7b12f463d5 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json
@@ -37,7 +37,6 @@
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "200",
 	"exclude_object": "1",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -102,7 +101,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json
index ac5b507cce..66c147c002 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json
@@ -133,7 +133,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/CoLiDo/process/fdm_process_common.json b/resources/profiles/CoLiDo/process/fdm_process_common.json
index 916ca91f84..21b6c070fa 100644
--- a/resources/profiles/CoLiDo/process/fdm_process_common.json
+++ b/resources/profiles/CoLiDo/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
@@ -69,7 +68,5 @@
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"compatible_printers": [],
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "19",
 	"scarf_angle_threshold": "155"
 }
diff --git a/resources/profiles/Comgrow.json b/resources/profiles/Comgrow.json
index d506431ce8..e3eb237518 100644
--- a/resources/profiles/Comgrow.json
+++ b/resources/profiles/Comgrow.json
@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.04.00.04",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
index ef8ce3ba93..f01aca4c88 100644
--- a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
+++ b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
diff --git a/resources/profiles/Comgrow/machine/fdm_machine_common.json b/resources/profiles/Comgrow/machine/fdm_machine_common.json
index 7bddc2a449..6c15932ff6 100644
--- a/resources/profiles/Comgrow/machine/fdm_machine_common.json
+++ b/resources/profiles/Comgrow/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json
index f9fe24a86e..5d63eecaeb 100644
--- a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json	
+++ b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "VXNVLkCAnWrWUyuq",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json
index 75b32fd2bc..6c716b7448 100644
--- a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json	
+++ b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fHx55sqqkzl0l6vD",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json
index 9ea2e4419a..82c4edfd04 100644
--- a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json	
+++ b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "s2ySRT9zoN0MzFMG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json b/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json
index a19f2568d7..85e1eb5eb8 100644
--- a/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json	
+++ b/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "VFKy39bkuifq4aEz",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json
index 4d428aca40..ad93a3003b 100644
--- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json	
+++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "zwEXxLeBYeJlVsrU",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json
index a50b6ac485..9683ba86ef 100644
--- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json	
+++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "MwfGKEFTGptYVgVg",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json
index 1ef23da2af..3db25ca6c5 100644
--- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json	
+++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "D15fxV5mACh2XWMT",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json
index d79d7afe4c..8fcbf04693 100644
--- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json	
+++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "INYjczFN5gWflgRJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json
index 326c4c7d26..bb7fc4f905 100644
--- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json	
+++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "CDKsOIpM74w1NhsA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json
index 7118e614d2..3b51d2b5aa 100644
--- a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json	
+++ b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "gHH8QHbtpAr7iSj3",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json
index 82140f2a11..012d382d6d 100644
--- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json	
+++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QU9R8iFuvSrnijkO",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json
index 2088fd5d01..1b345c51d8 100644
--- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json	
+++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "oQkDbf0FdMb4nV0i",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json
index 1f9ad6050d..f24b345690 100644
--- a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json	
+++ b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1IxP6FaNbkCM6bz8",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.32",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json
index 515bcfdde8..32958ee493 100644
--- a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json	
+++ b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "67PM6ka97wMVLSJV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.40",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json
index bdae66b5e8..21009bb931 100644
--- a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json	
+++ b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7fJumwUT4xqMSvYo",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.48",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json
index fae10074b2..6a4d439820 100644
--- a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json	
+++ b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "407WH0SRTXRCg7Gz",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.56",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json
index b926f2ee86..04b9a6bd06 100644
--- a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json
+++ b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json
@@ -107,7 +107,6 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Comgrow/process/fdm_process_common.json b/resources/profiles/Comgrow/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Comgrow/process/fdm_process_common.json
+++ b/resources/profiles/Comgrow/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json
index 23b8b3799b..a870a8d7d6 100644
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.77",
+	"version": "02.03.02.80",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
@@ -116,10 +116,6 @@
 			"name": "Creality K1",
 			"sub_path": "machine/Creality K1.json"
 		},
-		{
-			"name": "Creality K1_CFS-C",
-			"sub_path": "machine/Creality K1_CFS-C.json"
-		},
 		{
 			"name": "Creality K1 Max",
 			"sub_path": "machine/Creality K1 Max.json"
@@ -145,12 +141,12 @@
 			"sub_path": "machine/Creality K1C_CFS-C.json"
 		},
 		{
-			"name": "Creality K2",
-			"sub_path": "machine/Creality K2.json"
+			"name": "Creality K1_CFS-C",
+			"sub_path": "machine/Creality K1_CFS-C.json"
 		},
 		{
-			"name": "Creality K2 SE",
-			"sub_path": "machine/Creality K2 SE.json"
+			"name": "Creality K2",
+			"sub_path": "machine/Creality K2.json"
 		},
 		{
 			"name": "Creality K2 Plus",
@@ -160,6 +156,10 @@
 			"name": "Creality K2 Pro",
 			"sub_path": "machine/Creality K2 Pro.json"
 		},
+		{
+			"name": "Creality K2 SE",
+			"sub_path": "machine/Creality K2 SE.json"
+		},
 		{
 			"name": "Creality SPARKX i7",
 			"sub_path": "machine/Creality SPARKX i7.json"
@@ -178,10 +178,82 @@
 			"name": "fdm_process_creality_common",
 			"sub_path": "process/fdm_process_creality_common.json"
 		},
+		{
+			"name": "0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm HueForge @Creality Hi 0.4 nozzle",
+			"sub_path": "process/0.08mm HueForge @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm HueForge @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.08mm HueForge @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm HueForge @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm HueForge @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm HueForge @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm SuperDetail @Creality CR-6 0.2",
 			"sub_path": "process/0.08mm SuperDetail @Creality CR-6 0.2.json"
 		},
+		{
+			"name": "0.08mm SuperDetail @Creality Hi",
+			"sub_path": "process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1 (0.4 nozzle)",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1C 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1Max (0.4 nozzle)",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json"
+		},
 		{
 			"name": "0.10mm HighDetail @Creality 0.4 CR-6 0.4",
 			"sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json"
@@ -190,6 +262,14 @@
 			"name": "0.10mm HighDetail @Creality CR-M4",
 			"sub_path": "process/0.10mm HighDetail @Creality CR-M4.json"
 		},
+		{
+			"name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle",
+			"sub_path": "process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json"
+		},
 		{
 			"name": "0.12mm Detail @Creality 0.4 CR-6",
 			"sub_path": "process/0.12mm Detail @Creality CR-6 0.4.json"
@@ -198,6 +278,22 @@
 			"name": "0.12mm Detail @Creality CR-6 0.2",
 			"sub_path": "process/0.12mm Detail @Creality CR-6 0.2.json"
 		},
+		{
+			"name": "0.12mm Detail @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.12mm Detail @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Detail @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Fine @Creality CR10Max",
 			"sub_path": "process/0.12mm Fine @Creality CR10Max.json"
@@ -262,6 +358,18 @@
 			"name": "0.12mm Fine @Creality Ender5Pro (2019)",
 			"sub_path": "process/0.12mm Fine @Creality Ender5Pro (2019).json"
 		},
+		{
+			"name": "0.12mm Fine @Creality Hi",
+			"sub_path": "process/0.12mm Fine @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json"
+		},
+		{
+			"name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json"
+		},
 		{
 			"name": "0.15mm Detail @Creality CR-M4",
 			"sub_path": "process/0.15mm Detail @Creality CR-M4.json"
@@ -278,6 +386,10 @@
 			"name": "0.15mm Optimal @Creality Ender5Pro (2019)",
 			"sub_path": "process/0.15mm Optimal @Creality Ender5Pro (2019).json"
 		},
+		{
+			"name": "0.16mm Fine @Creality Ender-3 V4 0.4 nozzle",
+			"sub_path": "process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Optimal @Creality CR-6 0.2",
 			"sub_path": "process/0.16mm Optimal @Creality CR-6 0.2.json"
@@ -390,10 +502,78 @@
 			"name": "0.16mm Optimal @Creality Ender6",
 			"sub_path": "process/0.16mm Optimal @Creality Ender6.json"
 		},
+		{
+			"name": "0.16mm Optimal @Creality Hi",
+			"sub_path": "process/0.16mm Optimal @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
+			"sub_path": "process/0.16mm Optimal @Creality K1 (0.4 nozzle).json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1 SE",
+			"sub_path": "process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1C",
+			"sub_path": "process/0.16mm Optimal @Creality K1C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
+			"sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Optimal @Creality Sermoon V1",
 			"sub_path": "process/0.16mm Optimal @Creality Sermoon V1.json"
 		},
+		{
+			"name": "0.16mm Standard @Creality K2 SE 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json"
+		},
+		{
+			"name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.1mm Standard @Creality Hi 0.2 nozzle",
+			"sub_path": "process/0.1mm Standard @Creality Hi 0.2 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality CR-6 0.4",
 			"sub_path": "process/0.20mm Standard @Creality CR-6 0.4.json"
@@ -422,6 +602,10 @@
 			"name": "0.20mm Standard @Creality CR10V3 0.6",
 			"sub_path": "process/0.20mm Standard @Creality CR10V3 0.6.json"
 		},
+		{
+			"name": "0.20mm Standard @Creality Ender-3 V4 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality Ender3",
 			"sub_path": "process/0.20mm Standard @Creality Ender3.json"
@@ -530,14 +714,74 @@
 			"name": "0.20mm Standard @Creality Ender6",
 			"sub_path": "process/0.20mm Standard @Creality Ender6.json"
 		},
+		{
+			"name": "0.20mm Standard @Creality Hi",
+			"sub_path": "process/0.20mm Standard @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1 (0.4 nozzle)",
+			"sub_path": "process/0.20mm Standard @Creality K1 (0.4 nozzle).json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1 SE",
+			"sub_path": "process/0.20mm Standard @Creality K1 SE 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1C",
+			"sub_path": "process/0.20mm Standard @Creality K1C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+			"sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K1_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality K2 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Creality K2 0.4 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality K2 SE 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Creality Sermoon V1",
 			"sub_path": "process/0.20mm Standard @Creality Sermoon V1.json"
 		},
+		{
+			"name": "0.20mm Strength @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json"
+		},
 		{
 			"name": "0.24mm Draft @Creality CR-6 0.4",
 			"sub_path": "process/0.24mm Draft @Creality CR-6 0.4.json"
@@ -550,6 +794,10 @@
 			"name": "0.24mm Draft @Creality CR10Max",
 			"sub_path": "process/0.24mm Draft @Creality CR10Max.json"
 		},
+		{
+			"name": "0.24mm Draft @Creality Ender-3 V4 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Draft @Creality Ender3 0.2",
 			"sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json"
@@ -626,10 +874,70 @@
 			"name": "0.24mm Draft @Creality Ender5Pro (2019)",
 			"sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019).json"
 		},
+		{
+			"name": "0.24mm Draft @Creality Hi",
+			"sub_path": "process/0.24mm Draft @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
+			"sub_path": "process/0.24mm Draft @Creality K1 (0.4 nozzle).json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1 SE",
+			"sub_path": "process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1C",
+			"sub_path": "process/0.24mm Draft @Creality K1C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
+			"sub_path": "process/0.24mm Draft @Creality K1Max (0.4 nozzle).json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K1_CFS-C 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Optimal @Creality CR-6 0.8",
 			"sub_path": "process/0.24mm Optimal @Creality CR-6 0.8.json"
 		},
+		{
+			"name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Creality K2 SE 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Draft @Creality Ender3 0.2",
 			"sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json"
@@ -674,18 +982,98 @@
 			"name": "0.28mm SuperDraft @Creality CR-6 0.6",
 			"sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.6.json"
 		},
+		{
+			"name": "0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm SuperDraft @Creality Hi 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm SuperDraft @Creality K2 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle",
+			"sub_path": "process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json"
+		},
+		{
+			"name": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
+			"sub_path": "process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle",
+			"sub_path": "process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality Ender-5 Max 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality Hi",
+			"sub_path": "process/0.30mm Standard @Creality Hi 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+			"sub_path": "process/0.30mm Standard @Creality K1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.30mm Standard @Creality K1 SE 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality K1C",
+			"sub_path": "process/0.30mm Standard @Creality K1C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+			"sub_path": "process/0.30mm Standard @Creality K1Max (0.6 nozzle).json"
+		},
 		{
 			"name": "0.30mm Standard @Creality K2 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Creality K2 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality K2 Pro 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Creality SPARKX i7 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json"
+		},
 		{
 			"name": "0.32mm Chunky @Creality CR-6 0.6",
 			"sub_path": "process/0.32mm Chunky @Creality CR-6 0.6.json"
 		},
+		{
+			"name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json"
+		},
 		{
 			"name": "0.32mm Standard @Creality CR-6 0.8",
 			"sub_path": "process/0.32mm Standard @Creality CR-6 0.8.json"
 		},
+		{
+			"name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json"
+		},
 		{
 			"name": "0.36mm SuperChunky @Creality CR-6 0.6",
 			"sub_path": "process/0.36mm SuperChunky @Creality CR-6 0.6.json"
@@ -694,10 +1082,54 @@
 			"name": "0.40mm Draft @Creality CR-6 0.8",
 			"sub_path": "process/0.40mm Draft @Creality CR-6 0.8.json"
 		},
+		{
+			"name": "0.40mm Standard @Creality Ender-5 Max 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality Hi 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality Hi 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+			"sub_path": "process/0.40mm Standard @Creality K1 (0.8 nozzle).json"
+		},
+		{
+			"name": "0.40mm Standard @Creality K1 SE 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality K1C",
+			"sub_path": "process/0.40mm Standard @Creality K1C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+			"sub_path": "process/0.40mm Standard @Creality K1Max (0.8 nozzle).json"
+		},
 		{
 			"name": "0.40mm Standard @Creality K2 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Creality K2 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality K2 Pro 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Creality SPARKX i7 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Strength @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json"
+		},
 		{
 			"name": "0.44mm SuperExtraChunky @Creality CR-6 0.6",
 			"sub_path": "process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json"
@@ -710,10 +1142,18 @@
 			"name": "0.48mm Draft @Creality CR-6 0.8",
 			"sub_path": "process/0.48mm Draft @Creality CR-6 0.8.json"
 		},
+		{
+			"name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json"
+		},
 		{
 			"name": "0.56mm SuperChunky @Creality CR-6 0.8",
 			"sub_path": "process/0.56mm SuperChunky @Creality CR-6 0.8.json"
 		},
+		{
+			"name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json"
+		},
 		{
 			"name": "fdm_process_common_klipper",
 			"sub_path": "process/fdm_process_common_klipper.json"
@@ -746,46 +1186,18 @@
 			"name": "fdm_process_creality_common_1_0",
 			"sub_path": "process/fdm_process_creality_common_1_0.json"
 		},
-		{
-			"name": "0.08mm SuperDetail @Creality Hi",
-			"sub_path": "process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json"
-		},
 		{
 			"name": "0.08mm SuperDetail @Creality K2 0.2 nozzle",
 			"sub_path": "process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json"
 		},
-		{
-			"name": "0.08mm SuperDetail @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle",
-			"sub_path": "process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json"
-		},
 		{
 			"name": "0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle",
 			"sub_path": "process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json"
 		},
-		{
-			"name": "0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.10mm HighDetail @Creality K2 0.2 nozzle",
 			"sub_path": "process/0.10mm HighDetail @Creality K2 0.2 nozzle.json"
 		},
-		{
-			"name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
-			"sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json"
-		},
 		{
 			"name": "0.10mm HighDetail @Creality K2 Pro 0.2 nozzle",
 			"sub_path": "process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json"
@@ -794,26 +1206,10 @@
 			"name": "0.12mm Detail @Creality K2 0.2 nozzle",
 			"sub_path": "process/0.12mm Detail @Creality K2 0.2 nozzle.json"
 		},
-		{
-			"name": "0.12mm Detail @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.12mm Detail @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
-			"sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json"
-		},
 		{
 			"name": "0.12mm Detail @Creality K2 Pro 0.2 nozzle",
 			"sub_path": "process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json"
 		},
-		{
-			"name": "0.12mm Detail @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.12mm Fine @Creality CR10SE 0.2",
 			"sub_path": "process/0.12mm Fine @Creality CR10SE 0.2.json"
@@ -842,10 +1238,6 @@
 			"name": "0.12mm Fine @Creality Ender3V3KE",
 			"sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json"
 		},
-		{
-			"name": "0.12mm Fine @Creality Hi",
-			"sub_path": "process/0.12mm Fine @Creality Hi 0.4 nozzle.json"
-		},
 		{
 			"name": "0.12mm Fine @Creality K1 (0.4 nozzle)",
 			"sub_path": "process/0.12mm Fine @Creality K1 (0.4 nozzle).json"
@@ -866,10 +1258,6 @@
 			"name": "0.14mm Optimal @Creality K2 0.2 nozzle",
 			"sub_path": "process/0.14mm Optimal @Creality K2 0.2 nozzle.json"
 		},
-		{
-			"name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
-			"sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json"
-		},
 		{
 			"name": "0.14mm Optimal @Creality K2 Pro 0.2 nozzle",
 			"sub_path": "process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json"
@@ -902,46 +1290,10 @@
 			"name": "0.16mm Optimal @Creality Ender3V3KE",
 			"sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json"
 		},
-		{
-			"name": "0.16mm Optimal @Creality Hi",
-			"sub_path": "process/0.16mm Optimal @Creality Hi 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
-			"sub_path": "process/0.16mm Optimal @Creality K1 (0.4 nozzle).json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1 SE",
-			"sub_path": "process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1C",
-			"sub_path": "process/0.16mm Optimal @Creality K1C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
-			"sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.18mm Detail @Creality K2 0.6 nozzle",
 			"sub_path": "process/0.18mm Detail @Creality K2 0.6 nozzle.json"
 		},
-		{
-			"name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json"
-		},
 		{
 			"name": "0.18mm Detail @Creality K2 Pro 0.6 nozzle",
 			"sub_path": "process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json"
@@ -978,34 +1330,6 @@
 			"name": "0.20mm Standard @Creality Ender3V3KE",
 			"sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json"
 		},
-		{
-			"name": "0.20mm Standard @Creality Hi",
-			"sub_path": "process/0.20mm Standard @Creality Hi 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1 (0.4 nozzle)",
-			"sub_path": "process/0.20mm Standard @Creality K1 (0.4 nozzle).json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1 SE",
-			"sub_path": "process/0.20mm Standard @Creality K1 SE 0.4.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1C",
-			"sub_path": "process/0.20mm Standard @Creality K1C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
-			"sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle",
 			"sub_path": "process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json"
@@ -1014,10 +1338,6 @@
 			"name": "0.24mm Detail @Creality K2 0.8 nozzle",
 			"sub_path": "process/0.24mm Detail @Creality K2 0.8 nozzle.json"
 		},
-		{
-			"name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json"
-		},
 		{
 			"name": "0.24mm Detail @Creality K2 Pro 0.8 nozzle",
 			"sub_path": "process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json"
@@ -1050,38 +1370,6 @@
 			"name": "0.24mm Draft @Creality Ender3V3KE",
 			"sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json"
 		},
-		{
-			"name": "0.24mm Draft @Creality Hi",
-			"sub_path": "process/0.24mm Draft @Creality Hi 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
-			"sub_path": "process/0.24mm Draft @Creality K1 (0.4 nozzle).json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1 SE",
-			"sub_path": "process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1C",
-			"sub_path": "process/0.24mm Draft @Creality K1C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
-			"sub_path": "process/0.24mm Draft @Creality K1Max (0.4 nozzle).json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.24mm Optimal @Creality Ender-3 V3",
 			"sub_path": "process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json"
@@ -1110,26 +1398,10 @@
 			"name": "0.24mm Optimal @Creality K2 0.6 nozzle",
 			"sub_path": "process/0.24mm Optimal @Creality K2 0.6 nozzle.json"
 		},
-		{
-			"name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json"
-		},
 		{
 			"name": "0.24mm Optimal @Creality K2 Pro 0.6 nozzle",
 			"sub_path": "process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json"
 		},
-		{
-			"name": "0.28mm SuperDraft @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json"
-		},
 		{
 			"name": "0.30mm Standard @Creality Ender-3 V3",
 			"sub_path": "process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json"
@@ -1138,30 +1410,6 @@
 			"name": "0.30mm Standard @Creality Ender-3 V3 Plus",
 			"sub_path": "process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json"
 		},
-		{
-			"name": "0.30mm Standard @Creality Hi",
-			"sub_path": "process/0.30mm Standard @Creality Hi 0.6 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
-			"sub_path": "process/0.30mm Standard @Creality K1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K1C",
-			"sub_path": "process/0.30mm Standard @Creality K1C 0.6 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
-			"sub_path": "process/0.30mm Standard @Creality K1Max (0.6 nozzle).json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K2 Pro 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json"
-		},
 		{
 			"name": "0.32mm Optimal @Creality K1 (0.8 nozzle)",
 			"sub_path": "process/0.32mm Optimal @Creality K1 (0.8 nozzle).json"
@@ -1178,10 +1426,6 @@
 			"name": "0.32mm Optimal @Creality K2 0.8 nozzle",
 			"sub_path": "process/0.32mm Optimal @Creality K2 0.8 nozzle.json"
 		},
-		{
-			"name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json"
-		},
 		{
 			"name": "0.32mm Optimal @Creality K2 Pro 0.8 nozzle",
 			"sub_path": "process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json"
@@ -1214,46 +1458,14 @@
 			"name": "0.36mm Draft @Creality K2 0.6 nozzle",
 			"sub_path": "process/0.36mm Draft @Creality K2 0.6 nozzle.json"
 		},
-		{
-			"name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json"
-		},
 		{
 			"name": "0.36mm Draft @Creality K2 Pro 0.6 nozzle",
 			"sub_path": "process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json"
 		},
-		{
-			"name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
-			"sub_path": "process/0.40mm Standard @Creality K1 (0.8 nozzle).json"
-		},
-		{
-			"name": "0.40mm Standard @Creality K1C",
-			"sub_path": "process/0.40mm Standard @Creality K1C 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality K1 SE 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
-			"sub_path": "process/0.40mm Standard @Creality K1Max (0.8 nozzle).json"
-		},
-		{
-			"name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality K2 Pro 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json"
-		},
 		{
 			"name": "0.42mm SuperDraft @Creality K2 0.6 nozzle",
 			"sub_path": "process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json"
 		},
-		{
-			"name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json"
-		},
 		{
 			"name": "0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle",
 			"sub_path": "process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json"
@@ -1274,10 +1486,6 @@
 			"name": "0.48mm Draft @Creality K2 0.8 nozzle",
 			"sub_path": "process/0.48mm Draft @Creality K2 0.8 nozzle.json"
 		},
-		{
-			"name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json"
-		},
 		{
 			"name": "0.48mm Draft @Creality K2 Pro 0.8 nozzle",
 			"sub_path": "process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json"
@@ -1286,10 +1494,6 @@
 			"name": "0.56mm SuperDraft @Creality K2 0.8 nozzle",
 			"sub_path": "process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json"
 		},
-		{
-			"name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json"
-		},
 		{
 			"name": "0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle",
 			"sub_path": "process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json"
@@ -1421,210 +1625,6 @@
 		{
 			"name": "0.36mm Chunky @Creality Ender5Pro (2019) 1.0",
 			"sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality K1 SE 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality SPARKX i7 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality SPARKX i7 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json"
-		},
-		{
-			"name": "0.08mm HueForge @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm HueForge @Creality K2 0.4 nozzle",
-			"sub_path": "process/0.08mm HueForge @Creality K2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality Hi 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality Hi 0.8 nozzle.json"
-		},
-		{
-			"name": "0.08mm HueForge @Creality Hi 0.4 nozzle",
-			"sub_path": "process/0.08mm HueForge @Creality Hi 0.4 nozzle.json"
-		},
-		{
-			"name": "0.1mm Standard @Creality Hi 0.2 nozzle",
-			"sub_path": "process/0.1mm Standard @Creality Hi 0.2 nozzle.json"
-		},
-		{
-			"name": "0.16mm Standard @Creality K2 SE 0.4 nozzle",
-			"sub_path": "process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality K2 SE 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Standard @Creality K2 SE 0.4 nozzle",
-			"sub_path": "process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm HueForge @Creality K2 Pro 0.4 nozzle",
-			"sub_path": "process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Creality Ender-3 V4 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json"
-		},
-		{
-			"name": "0.40mm Strength @Creality K2 Plus 0.8 nozzle",
-			"sub_path": "process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json"
-		},
-		{
-			"name": "0.30mm Strength @Creality K2 Plus 0.6 nozzle",
-			"sub_path": "process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json"
-		},
-		{
-			"name": "0.08mm HueForge @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm High Quality @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm Strength @Creality K2 Plus 0.4 nozzle",
-			"sub_path": "process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.12mm Fine @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json"
-		},
-		{
-			"name": "0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle",
-			"sub_path": "process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1 (0.4 nozzle)",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1C 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1Max (0.4 nozzle)",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json"
-		},
-		{
-			"name": "0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Fine @Creality Ender-3 V4 0.4 nozzle",
-			"sub_path": "process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality Ender-3 V4 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Draft @Creality K1_CFS-C 0.4 nozzle",
-			"sub_path": "process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm SuperDraft @Creality Hi 0.4 nozzle",
-			"sub_path": "process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json"
-		},
-		{
-			"name": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
-			"sub_path": "process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json"
-		},
-		{
-			"name": "0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle",
-			"sub_path": "process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Creality Ender-5 Max 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Creality Ender-5 Max 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -1633,28 +1633,20 @@
 			"sub_path": "filament/fdm_filament_common.json"
 		},
 		{
-			"name": "Generic ABS @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic ABS @Creality Ender-5Max-all.json"
+			"name": "fdm_filament_hips",
+			"sub_path": "filament/fdm_filament_hips.json"
 		},
 		{
-			"name": "Generic ASA @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic ASA @Creality Ender-5Max-all.json"
+			"name": "fdm_filament_petg",
+			"sub_path": "filament/fdm_filament_petg.json"
 		},
 		{
-			"name": "Generic PA @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic PA @Creality Ender-5Max-all.json"
+			"name": "fdm_filament_pp",
+			"sub_path": "filament/fdm_filament_pp.json"
 		},
 		{
-			"name": "Generic PETG @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic PETG @Creality Ender-5Max-all.json"
-		},
-		{
-			"name": "Generic PLA @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic PLA @Creality Ender-5Max-all.json"
-		},
-		{
-			"name": "Generic TPU @Creality Ender-5Max-all",
-			"sub_path": "filament/Generic TPU @Creality Ender-5Max-all.json"
+			"name": "fdm_filament_pps",
+			"sub_path": "filament/fdm_filament_pps.json"
 		},
 		{
 			"name": "Creality Hyper ABS @Ender-5Max-all",
@@ -1672,6 +1664,138 @@
 			"name": "Creality Silk PLA @Ender-5Max-all",
 			"sub_path": "filament/Creality Silk PLA @Ender-5Max-all.json"
 		},
+		{
+			"name": "Generic ABS @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic ABS @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic ASA @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Generic ASA-CF @K2 Plus-all",
+			"sub_path": "filament/Generic ASA-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic BVOH @Hi-all",
+			"sub_path": "filament/Generic BVOH @Hi-all.json"
+		},
+		{
+			"name": "Generic BVOH @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic BVOH @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic BVOH @K1C-all",
+			"sub_path": "filament/Generic BVOH @K1C-all.json"
+		},
+		{
+			"name": "Generic BVOH @K1C_CFS-C-all",
+			"sub_path": "filament/Generic BVOH @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic BVOH @K1_CFS-C-all",
+			"sub_path": "filament/Generic BVOH @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic BVOH @K2 Plus-all",
+			"sub_path": "filament/Generic BVOH @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic BVOH @K2 Pro-all",
+			"sub_path": "filament/Generic BVOH @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic BVOH @K2-all",
+			"sub_path": "filament/Generic BVOH @K2-all.json"
+		},
+		{
+			"name": "Generic PA @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic PA @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Generic PA6-GF @K2 Plus-all",
+			"sub_path": "filament/Generic PA6-GF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PCTG @K2 Plus-all",
+			"sub_path": "filament/Generic PCTG @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic PETG @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Generic PETG-GF @K2 Plus-all",
+			"sub_path": "filament/Generic PETG-GF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PETG-GF @K2 Pro-all",
+			"sub_path": "filament/Generic PETG-GF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PETG-GF @K2-all",
+			"sub_path": "filament/Generic PETG-GF @K2-all.json"
+		},
+		{
+			"name": "Generic PLA @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic PLA @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Generic PP-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PP-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PVA @Hi-all",
+			"sub_path": "filament/Generic PVA @Hi-all.json"
+		},
+		{
+			"name": "Generic PVA @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PVA @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PVA @K1C-all",
+			"sub_path": "filament/Generic PVA @K1C-all.json"
+		},
+		{
+			"name": "Generic PVA @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PVA @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PVA @K1_CFS-C-all",
+			"sub_path": "filament/Generic PVA @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PVA @K2 Plus-all",
+			"sub_path": "filament/Generic PVA @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PVA @K2 Pro-all",
+			"sub_path": "filament/Generic PVA @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PVA @K2-all",
+			"sub_path": "filament/Generic PVA @K2-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality Ender-5Max-all",
+			"sub_path": "filament/Generic TPU @Creality Ender-5Max-all.json"
+		},
+		{
+			"name": "Hyper PETG-GF @K1C-all",
+			"sub_path": "filament/Hyper PETG-GF @K1C-all.json"
+		},
+		{
+			"name": "Hyper PETG-GF @K2 Plus-all",
+			"sub_path": "filament/Hyper PETG-GF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PETG-GF @K2 Pro-all",
+			"sub_path": "filament/Hyper PETG-GF @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PETG-GF @K2-all",
+			"sub_path": "filament/Hyper PETG-GF @K2-all.json"
+		},
 		{
 			"name": "fdm_filament_abs",
 			"sub_path": "filament/fdm_filament_abs.json"
@@ -1701,300 +1825,24 @@
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
 		{
-			"name": "Generic ABS @Creality",
-			"sub_path": "filament/Generic ABS @Creality.json"
+			"name": "Generic HIPS @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic HIPS @K1 Max_CFS-C-all.json"
 		},
 		{
-			"name": "Generic ASA @Creality",
-			"sub_path": "filament/Generic ASA @Creality.json"
+			"name": "Generic HIPS @K1C-all",
+			"sub_path": "filament/Generic HIPS @K1C-all.json"
 		},
 		{
-			"name": "Generic PA-CF @Creality",
-			"sub_path": "filament/Generic PA-CF @Creality.json"
+			"name": "Generic HIPS @K1C_CFS-C-all",
+			"sub_path": "filament/Generic HIPS @K1C_CFS-C-all.json"
 		},
 		{
-			"name": "Generic PC @Creality",
-			"sub_path": "filament/Generic PC @Creality.json"
+			"name": "Generic HIPS @K1_CFS-C-all",
+			"sub_path": "filament/Generic HIPS @K1_CFS-C-all.json"
 		},
 		{
-			"name": "Generic PETG @Creality",
-			"sub_path": "filament/Generic PETG @Creality.json"
-		},
-		{
-			"name": "Generic PLA @Creality",
-			"sub_path": "filament/Generic PLA @Creality.json"
-		},
-		{
-			"name": "Generic PLA-CF @Creality",
-			"sub_path": "filament/Generic PLA-CF @Creality.json"
-		},
-		{
-			"name": "Generic PLA HF @Creality",
-			"sub_path": "filament/Generic PLA HF @Creality.json"
-		},
-		{
-			"name": "Generic Speed PLA @Creality HF",
-			"sub_path": "filament/Generic Speed PLA @Creality HF.json"
-		},
-		{
-			"name": "Generic TPU @Creality",
-			"sub_path": "filament/Generic TPU @Creality.json"
-		},
-		{
-			"name": "Generic ABS @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic ABS @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic ABS @Creality Hi-all",
-			"sub_path": "filament/Generic ABS @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic ABS @Creality K1-all",
-			"sub_path": "filament/Generic ABS @Creality K1-all.json"
-		},
-		{
-			"name": "Generic ABS @Creality K2-all",
-			"sub_path": "filament/Generic ABS @Creality K2-all.json"
-		},
-		{
-			"name": "Generic ASA @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic ASA @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic ASA @Creality Hi-all",
-			"sub_path": "filament/Generic ASA @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic ASA @Creality K1-all",
-			"sub_path": "filament/Generic ASA @Creality K1-all.json"
-		},
-		{
-			"name": "Generic ASA @Creality K2-all",
-			"sub_path": "filament/Generic ASA @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PA-CF @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PA-CF @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PA-CF @Creality K1-all",
-			"sub_path": "filament/Generic PA-CF @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PA-CF @Creality K2-all",
-			"sub_path": "filament/Generic PA-CF @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PC @Creality K1-all",
-			"sub_path": "filament/Generic PC @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PETG @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PETG @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PETG @Creality Hi-all",
-			"sub_path": "filament/Generic PETG @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PETG @Creality K1-all",
-			"sub_path": "filament/Generic PETG @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PETG @Creality K2-all",
-			"sub_path": "filament/Generic PETG @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PLA @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PLA @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PLA @Creality Hi-all",
-			"sub_path": "filament/Generic PLA @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA @Creality K1-all",
-			"sub_path": "filament/Generic PLA @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PLA @Creality K2-all",
-			"sub_path": "filament/Generic PLA @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PLA-CF @Creality Hi-all",
-			"sub_path": "filament/Generic PLA-CF @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA-CF @Creality K1-all",
-			"sub_path": "filament/Generic PLA-CF @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PLA-CF @Creality K2-all",
-			"sub_path": "filament/Generic PLA-CF @Creality K2-all.json"
-		},
-		{
-			"name": "Generic TPU @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic TPU @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic TPU @Creality Hi-all",
-			"sub_path": "filament/Generic TPU @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic TPU @Creality K1-all",
-			"sub_path": "filament/Generic TPU @Creality K1-all.json"
-		},
-		{
-			"name": "Generic TPU @Creality K2-all",
-			"sub_path": "filament/Generic TPU @Creality K2-all.json"
-		},
-		{
-			"name": "Generic ASA-CF @Creality Hi-all",
-			"sub_path": "filament/Generic ASA-CF @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @Creality Hi-all",
-			"sub_path": "filament/Generic PETG-CF @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA High Speed @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PLA High Speed @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PLA Matte @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PLA Matte @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PLA Silk @Creality Ender-3V3-all",
-			"sub_path": "filament/Generic PLA Silk @Creality Ender-3V3-all.json"
-		},
-		{
-			"name": "Generic PLA High Speed @Creality Hi-all",
-			"sub_path": "filament/Generic PLA High Speed @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA Matte @Creality Hi-all",
-			"sub_path": "filament/Generic PLA Matte @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA Silk @Creality Hi-all",
-			"sub_path": "filament/Generic PLA Silk @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA Wood @Creality Hi-all",
-			"sub_path": "filament/Generic PLA Wood @Creality Hi-all.json"
-		},
-		{
-			"name": "Generic PLA High Speed @Creality K1-all",
-			"sub_path": "filament/Generic PLA High Speed @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PLA Matte @Creality K1-all",
-			"sub_path": "filament/Generic PLA Matte @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PLA Silk @Creality K1-all",
-			"sub_path": "filament/Generic PLA Silk @Creality K1-all.json"
-		},
-		{
-			"name": "Generic PLA High Speed @Creality K2-all",
-			"sub_path": "filament/Generic PLA High Speed @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PLA Matte @Creality K2-all",
-			"sub_path": "filament/Generic PLA Matte @Creality K2-all.json"
-		},
-		{
-			"name": "Generic PLA Silk @Creality K2-all",
-			"sub_path": "filament/Generic PLA Silk @Creality K2-all.json"
-		},
-		{
-			"name": "fdm_filament_pp",
-			"sub_path": "filament/fdm_filament_pp.json"
-		},
-		{
-			"name": "fdm_filament_pps",
-			"sub_path": "filament/fdm_filament_pps.json"
-		},
-		{
-			"name": "fdm_filament_pva",
-			"sub_path": "filament/fdm_filament_pva.json"
-		},
-		{
-			"name": "fdm_filament_petg",
-			"sub_path": "filament/fdm_filament_petg.json"
-		},
-		{
-			"name": "fdm_filament_hips",
-			"sub_path": "filament/fdm_filament_hips.json"
-		},
-		{
-			"name": "CR-ABS @Ender-3 V4-all",
-			"sub_path": "filament/CR-ABS @Ender-3 V4-all.json"
-		},
-		{
-			"name": "CR-ABS @Hi-all",
-			"sub_path": "filament/CR-ABS @Hi-all.json"
-		},
-		{
-			"name": "CR-ABS @K1 Max_CFS-C-all",
-			"sub_path": "filament/CR-ABS @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "CR-ABS @K1 SE-all",
-			"sub_path": "filament/CR-ABS @K1 SE-all.json"
-		},
-		{
-			"name": "CR-ABS @K1 SE_CFS-C-all",
-			"sub_path": "filament/CR-ABS @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "CR-ABS @K1C-all",
-			"sub_path": "filament/CR-ABS @K1C-all.json"
-		},
-		{
-			"name": "CR-ABS @K1C_CFS-C-all",
-			"sub_path": "filament/CR-ABS @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "CR-ABS @K1_CFS-C-all",
-			"sub_path": "filament/CR-ABS @K1_CFS-C-all.json"
-		},
-		{
-			"name": "CR-ABS @K2 Plus-all",
-			"sub_path": "filament/CR-ABS @K2 Plus-all.json"
-		},
-		{
-			"name": "CR-ABS @K2 Pro-all",
-			"sub_path": "filament/CR-ABS @K2 Pro-all.json"
-		},
-		{
-			"name": "CR-ABS @K2 SE-all",
-			"sub_path": "filament/CR-ABS @K2 SE-all.json"
-		},
-		{
-			"name": "CR-ABS @K2-all",
-			"sub_path": "filament/CR-ABS @K2-all.json"
-		},
-		{
-			"name": "CR-Nylon @K1 Max_CFS-C-all",
-			"sub_path": "filament/CR-Nylon @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "CR-Nylon @K1C-all",
-			"sub_path": "filament/CR-Nylon @K1C-all.json"
-		},
-		{
-			"name": "CR-Nylon @K1C_CFS-C-all",
-			"sub_path": "filament/CR-Nylon @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "CR-Nylon @K1_CFS-C-all",
-			"sub_path": "filament/CR-Nylon @K1_CFS-C-all.json"
-		},
-		{
-			"name": "CR-Nylon @K2 Plus-all",
-			"sub_path": "filament/CR-Nylon @K2 Plus-all.json"
+			"name": "Generic HIPS @K2 Plus-all",
+			"sub_path": "filament/Generic HIPS @K2 Plus-all.json"
 		},
 		{
 			"name": "CR-PETG @Ender-3 V4-all",
@@ -2048,6 +1896,798 @@
 			"name": "CR-PETG @SPARKX i7-all",
 			"sub_path": "filament/CR-PETG @SPARKX i7-all.json"
 		},
+		{
+			"name": "Generic PETG @Ender-3 V4-all",
+			"sub_path": "filament/Generic PETG @Ender-3 V4-all.json"
+		},
+		{
+			"name": "Generic PETG @Hi-all",
+			"sub_path": "filament/Generic PETG @Hi-all.json"
+		},
+		{
+			"name": "Generic PETG @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PETG @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG @K1 SE-all",
+			"sub_path": "filament/Generic PETG @K1 SE-all.json"
+		},
+		{
+			"name": "Generic PETG @K1 SE_CFS-C-all",
+			"sub_path": "filament/Generic PETG @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG @K1C-all",
+			"sub_path": "filament/Generic PETG @K1C-all.json"
+		},
+		{
+			"name": "Generic PETG @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PETG @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG @K1_CFS-C-all",
+			"sub_path": "filament/Generic PETG @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG @K2 Plus-all",
+			"sub_path": "filament/Generic PETG @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PETG @K2 Pro-all",
+			"sub_path": "filament/Generic PETG @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PETG @K2 SE-all",
+			"sub_path": "filament/Generic PETG @K2 SE-all.json"
+		},
+		{
+			"name": "Generic PETG @K2-all",
+			"sub_path": "filament/Generic PETG @K2-all.json"
+		},
+		{
+			"name": "Generic PETG @SPARKX i7-all",
+			"sub_path": "filament/Generic PETG @SPARKX i7-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PETG-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K1C-all",
+			"sub_path": "filament/Generic PETG-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PETG-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PETG-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PETG-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K2 Pro-all",
+			"sub_path": "filament/Generic PETG-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @K2-all",
+			"sub_path": "filament/Generic PETG-CF @K2-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @SPARKX i7-all",
+			"sub_path": "filament/Generic PETG-CF @SPARKX i7-all.json"
+		},
+		{
+			"name": "Hyper PETG @Ender-3 V4-all",
+			"sub_path": "filament/Hyper PETG @Ender-3 V4-all.json"
+		},
+		{
+			"name": "Hyper PETG @Hi-all",
+			"sub_path": "filament/Hyper PETG @Hi-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1 Max_CFS-C-all",
+			"sub_path": "filament/Hyper PETG @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1 SE-all",
+			"sub_path": "filament/Hyper PETG @K1 SE-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1 SE_CFS-C-all",
+			"sub_path": "filament/Hyper PETG @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1C-all",
+			"sub_path": "filament/Hyper PETG @K1C-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1C_CFS-C-all",
+			"sub_path": "filament/Hyper PETG @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG @K1_CFS-C-all",
+			"sub_path": "filament/Hyper PETG @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG @K2 Plus-all",
+			"sub_path": "filament/Hyper PETG @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PETG @K2 Pro-all",
+			"sub_path": "filament/Hyper PETG @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PETG @K2 SE-all",
+			"sub_path": "filament/Hyper PETG @K2 SE-all.json"
+		},
+		{
+			"name": "Hyper PETG @K2-all",
+			"sub_path": "filament/Hyper PETG @K2-all.json"
+		},
+		{
+			"name": "Hyper PETG @SPARKX i7-all",
+			"sub_path": "filament/Hyper PETG @SPARKX i7-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Hyper PETG-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K1C-all",
+			"sub_path": "filament/Hyper PETG-CF @K1C-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Hyper PETG-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K1_CFS-C-all",
+			"sub_path": "filament/Hyper PETG-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K2 Plus-all",
+			"sub_path": "filament/Hyper PETG-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K2 Pro-all",
+			"sub_path": "filament/Hyper PETG-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @K2-all",
+			"sub_path": "filament/Hyper PETG-CF @K2-all.json"
+		},
+		{
+			"name": "Hyper PETG-CF @SPARKX i7-all",
+			"sub_path": "filament/Hyper PETG-CF @SPARKX i7-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @Hi-all",
+			"sub_path": "filament/Soleyin Basic PETG @Hi-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @K1C-all",
+			"sub_path": "filament/Soleyin Basic PETG @K1C-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @K2 Plus-all",
+			"sub_path": "filament/Soleyin Basic PETG @K2 Plus-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @K2 Pro-all",
+			"sub_path": "filament/Soleyin Basic PETG @K2 Pro-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @K2-all",
+			"sub_path": "filament/Soleyin Basic PETG @K2-all.json"
+		},
+		{
+			"name": "Soleyin Basic PETG @SPARKX i7-all",
+			"sub_path": "filament/Soleyin Basic PETG @SPARKX i7-all.json"
+		},
+		{
+			"name": "eSUN PETG @K2 Plus-all",
+			"sub_path": "filament/eSUN PETG @K2 Plus-all.json"
+		},
+		{
+			"name": "eSUN PETG+HS @K2 Plus-all",
+			"sub_path": "filament/eSUN PETG+HS @K2 Plus-all.json"
+		},
+		{
+			"name": "eSUN PETG-Basic @K2 Plus-all",
+			"sub_path": "filament/eSUN PETG-Basic @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PP @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PP @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PP @K1C-all",
+			"sub_path": "filament/Generic PP @K1C-all.json"
+		},
+		{
+			"name": "Generic PP @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PP @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PP @K1_CFS-C-all",
+			"sub_path": "filament/Generic PP @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PP @K2 Plus-all",
+			"sub_path": "filament/Generic PP @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PP @K2 Pro-all",
+			"sub_path": "filament/Generic PP @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PP @K2-all",
+			"sub_path": "filament/Generic PP @K2-all.json"
+		},
+		{
+			"name": "Generic PPS @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PPS @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS @K1C-all",
+			"sub_path": "filament/Generic PPS @K1C-all.json"
+		},
+		{
+			"name": "Generic PPS @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PPS @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS @K1_CFS-C-all",
+			"sub_path": "filament/Generic PPS @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS @K2 Plus-all",
+			"sub_path": "filament/Generic PPS @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PPS-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PPS-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS-CF @K1C-all",
+			"sub_path": "filament/Generic PPS-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PPS-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PPS-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PPS-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PPS-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PPS-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "CR-ABS @Ender-3 V4-all",
+			"sub_path": "filament/CR-ABS @Ender-3 V4-all.json"
+		},
+		{
+			"name": "CR-ABS @Hi-all",
+			"sub_path": "filament/CR-ABS @Hi-all.json"
+		},
+		{
+			"name": "CR-ABS @K1 Max_CFS-C-all",
+			"sub_path": "filament/CR-ABS @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "CR-ABS @K1 SE-all",
+			"sub_path": "filament/CR-ABS @K1 SE-all.json"
+		},
+		{
+			"name": "CR-ABS @K1 SE_CFS-C-all",
+			"sub_path": "filament/CR-ABS @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "CR-ABS @K1C-all",
+			"sub_path": "filament/CR-ABS @K1C-all.json"
+		},
+		{
+			"name": "CR-ABS @K1C_CFS-C-all",
+			"sub_path": "filament/CR-ABS @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "CR-ABS @K1_CFS-C-all",
+			"sub_path": "filament/CR-ABS @K1_CFS-C-all.json"
+		},
+		{
+			"name": "CR-ABS @K2 Plus-all",
+			"sub_path": "filament/CR-ABS @K2 Plus-all.json"
+		},
+		{
+			"name": "CR-ABS @K2 Pro-all",
+			"sub_path": "filament/CR-ABS @K2 Pro-all.json"
+		},
+		{
+			"name": "CR-ABS @K2 SE-all",
+			"sub_path": "filament/CR-ABS @K2 SE-all.json"
+		},
+		{
+			"name": "CR-ABS @K2-all",
+			"sub_path": "filament/CR-ABS @K2-all.json"
+		},
+		{
+			"name": "Generic ABS @Creality",
+			"sub_path": "filament/Generic ABS @Creality.json"
+		},
+		{
+			"name": "Generic ABS @Ender-3 V4-all",
+			"sub_path": "filament/Generic ABS @Ender-3 V4-all.json"
+		},
+		{
+			"name": "Generic ABS @Hi-all",
+			"sub_path": "filament/Generic ABS @Hi-all.json"
+		},
+		{
+			"name": "Generic ABS @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic ABS @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ABS @K1 SE-all",
+			"sub_path": "filament/Generic ABS @K1 SE-all.json"
+		},
+		{
+			"name": "Generic ABS @K1 SE_CFS-C-all",
+			"sub_path": "filament/Generic ABS @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ABS @K1C-all",
+			"sub_path": "filament/Generic ABS @K1C-all.json"
+		},
+		{
+			"name": "Generic ABS @K1C_CFS-C-all",
+			"sub_path": "filament/Generic ABS @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ABS @K1_CFS-C-all",
+			"sub_path": "filament/Generic ABS @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ABS @K2 Plus-all",
+			"sub_path": "filament/Generic ABS @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic ABS @K2 Pro-all",
+			"sub_path": "filament/Generic ABS @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic ABS @K2 SE-all",
+			"sub_path": "filament/Generic ABS @K2 SE-all.json"
+		},
+		{
+			"name": "Generic ABS @K2-all",
+			"sub_path": "filament/Generic ABS @K2-all.json"
+		},
+		{
+			"name": "Hyper ABS @Ender-3 V4-all",
+			"sub_path": "filament/Hyper ABS @Ender-3 V4-all.json"
+		},
+		{
+			"name": "Hyper ABS @Hi-all",
+			"sub_path": "filament/Hyper ABS @Hi-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1 Max_CFS-C-all",
+			"sub_path": "filament/Hyper ABS @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1 SE-all",
+			"sub_path": "filament/Hyper ABS @K1 SE-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1 SE_CFS-C-all",
+			"sub_path": "filament/Hyper ABS @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1C-all",
+			"sub_path": "filament/Hyper ABS @K1C-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1C_CFS-C-all",
+			"sub_path": "filament/Hyper ABS @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper ABS @K1_CFS-C-all",
+			"sub_path": "filament/Hyper ABS @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper ABS @K2 Plus-all",
+			"sub_path": "filament/Hyper ABS @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper ABS @K2 Pro-all",
+			"sub_path": "filament/Hyper ABS @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper ABS @K2 SE-all",
+			"sub_path": "filament/Hyper ABS @K2 SE-all.json"
+		},
+		{
+			"name": "Hyper ABS @K2-all",
+			"sub_path": "filament/Hyper ABS @K2-all.json"
+		},
+		{
+			"name": "eSUN ABS+ @K2 Plus-all",
+			"sub_path": "filament/eSUN ABS+ @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality",
+			"sub_path": "filament/Generic ASA @Creality.json"
+		},
+		{
+			"name": "Generic ASA @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic ASA @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ASA @K1 SE-all",
+			"sub_path": "filament/Generic ASA @K1 SE-all.json"
+		},
+		{
+			"name": "Generic ASA @K1 SE_CFS-C-all",
+			"sub_path": "filament/Generic ASA @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ASA @K1C-all",
+			"sub_path": "filament/Generic ASA @K1C-all.json"
+		},
+		{
+			"name": "Generic ASA @K1C_CFS-C-all",
+			"sub_path": "filament/Generic ASA @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ASA @K1_CFS-C-all",
+			"sub_path": "filament/Generic ASA @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic ASA @K2 Plus-all",
+			"sub_path": "filament/Generic ASA @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic ASA @K2 Pro-all",
+			"sub_path": "filament/Generic ASA @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic ASA @K2 SE-all",
+			"sub_path": "filament/Generic ASA @K2 SE-all.json"
+		},
+		{
+			"name": "Generic ASA @K2-all",
+			"sub_path": "filament/Generic ASA @K2-all.json"
+		},
+		{
+			"name": "HP-ASA @K1 Max_CFS-C-all",
+			"sub_path": "filament/HP-ASA @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "HP-ASA @K1C-all",
+			"sub_path": "filament/HP-ASA @K1C-all.json"
+		},
+		{
+			"name": "HP-ASA @K1C_CFS-C-all",
+			"sub_path": "filament/HP-ASA @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "HP-ASA @K1_CFS-C-all",
+			"sub_path": "filament/HP-ASA @K1_CFS-C-all.json"
+		},
+		{
+			"name": "HP-ASA @K2 Plus-all",
+			"sub_path": "filament/HP-ASA @K2 Plus-all.json"
+		},
+		{
+			"name": "HP-ASA @K2 Pro-all",
+			"sub_path": "filament/HP-ASA @K2 Pro-all.json"
+		},
+		{
+			"name": "HP-ASA @K2 SE-all",
+			"sub_path": "filament/HP-ASA @K2 SE-all.json"
+		},
+		{
+			"name": "HP-ASA @K2-all",
+			"sub_path": "filament/HP-ASA @K2-all.json"
+		},
+		{
+			"name": "eSUN ASA+ @K2 Plus-all",
+			"sub_path": "filament/eSUN ASA+ @K2 Plus-all.json"
+		},
+		{
+			"name": "CR-Nylon @K1 Max_CFS-C-all",
+			"sub_path": "filament/CR-Nylon @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "CR-Nylon @K1C-all",
+			"sub_path": "filament/CR-Nylon @K1C-all.json"
+		},
+		{
+			"name": "CR-Nylon @K1C_CFS-C-all",
+			"sub_path": "filament/CR-Nylon @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "CR-Nylon @K1_CFS-C-all",
+			"sub_path": "filament/CR-Nylon @K1_CFS-C-all.json"
+		},
+		{
+			"name": "CR-Nylon @K2 Plus-all",
+			"sub_path": "filament/CR-Nylon @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PA @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA @K1C-all",
+			"sub_path": "filament/Generic PA @K1C-all.json"
+		},
+		{
+			"name": "Generic PA @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PA @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA @K1_CFS-C-all",
+			"sub_path": "filament/Generic PA @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA @K2 Plus-all",
+			"sub_path": "filament/Generic PA @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA @K2 Pro-all",
+			"sub_path": "filament/Generic PA @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PA @K2-all",
+			"sub_path": "filament/Generic PA @K2-all.json"
+		},
+		{
+			"name": "Generic PA-CF @Creality",
+			"sub_path": "filament/Generic PA-CF @Creality.json"
+		},
+		{
+			"name": "Generic PA-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PA-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA-CF @K1C-all",
+			"sub_path": "filament/Generic PA-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PA-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PA-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PA-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PA-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA12-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PA12-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PA6-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K1C-all",
+			"sub_path": "filament/Generic PA6-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PA6-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PA6-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PA6-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA6-CF @K2 Pro-all",
+			"sub_path": "filament/Generic PA6-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PA612-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PA612-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PA612-CF @K2 Pro-all",
+			"sub_path": "filament/Generic PA612-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PAHT-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K1C-all",
+			"sub_path": "filament/Generic PAHT-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PAHT-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PAHT-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PAHT-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K2 Pro-all",
+			"sub_path": "filament/Generic PAHT-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PAHT-CF @K2-all",
+			"sub_path": "filament/Generic PAHT-CF @K2-all.json"
+		},
+		{
+			"name": "Generic Support for PA @K2 Plus-all",
+			"sub_path": "filament/Generic Support for PA @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PA6-CF @K2 Plus-all",
+			"sub_path": "filament/Hyper PA6-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PA6-CF @K2 Pro-all",
+			"sub_path": "filament/Hyper PA6-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PA612-CF @K2 Plus-all",
+			"sub_path": "filament/Hyper PA612-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PA612-CF @K2 Pro-all",
+			"sub_path": "filament/Hyper PA612-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K1C-all",
+			"sub_path": "filament/Hyper PAHT-CF @K1C-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Hyper PAHT-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K1_CFS-C-all",
+			"sub_path": "filament/Hyper PAHT-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K2 Plus-all",
+			"sub_path": "filament/Hyper PAHT-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K2 Pro-all",
+			"sub_path": "filament/Hyper PAHT-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PAHT-CF @K2-all",
+			"sub_path": "filament/Hyper PAHT-CF @K2-all.json"
+		},
+		{
+			"name": "Hyper PPA-CF @K2 Plus-all",
+			"sub_path": "filament/Hyper PPA-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PPA-CF @K2 Pro-all",
+			"sub_path": "filament/Hyper PPA-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PC @Creality",
+			"sub_path": "filament/Generic PC @Creality.json"
+		},
+		{
+			"name": "Generic PC @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PC @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PC @K1C-all",
+			"sub_path": "filament/Generic PC @K1C-all.json"
+		},
+		{
+			"name": "Generic PC @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PC @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PC @K1_CFS-C-all",
+			"sub_path": "filament/Generic PC @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PC @K2 Plus-all",
+			"sub_path": "filament/Generic PC @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PC @K2 Pro-all",
+			"sub_path": "filament/Generic PC @K2 Pro-all.json"
+		},
+		{
+			"name": "Hyper PC @K2 Plus-all",
+			"sub_path": "filament/Hyper PC @K2 Plus-all.json"
+		},
+		{
+			"name": "Hyper PC @K2 Pro-all",
+			"sub_path": "filament/Hyper PC @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PET @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PET @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET @K1C-all",
+			"sub_path": "filament/Generic PET @K1C-all.json"
+		},
+		{
+			"name": "Generic PET @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PET @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET @K1_CFS-C-all",
+			"sub_path": "filament/Generic PET @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET @K2 Plus-all",
+			"sub_path": "filament/Generic PET @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PET @K2 Pro-all",
+			"sub_path": "filament/Generic PET @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PET @K2-all",
+			"sub_path": "filament/Generic PET @K2-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic PET-CF @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K1C-all",
+			"sub_path": "filament/Generic PET-CF @K1C-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K1C_CFS-C-all",
+			"sub_path": "filament/Generic PET-CF @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K1_CFS-C-all",
+			"sub_path": "filament/Generic PET-CF @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K2 Plus-all",
+			"sub_path": "filament/Generic PET-CF @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic PET-CF @K2 Pro-all",
+			"sub_path": "filament/Generic PET-CF @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality",
+			"sub_path": "filament/Generic PETG @Creality.json"
+		},
+		{
+			"name": "eSUN PET-Basic @K2 Plus-all",
+			"sub_path": "filament/eSUN PET-Basic @K2 Plus-all.json"
+		},
 		{
 			"name": "CR-PLA @Ender-3 V4-all",
 			"sub_path": "filament/CR-PLA @Ender-3 V4-all.json"
@@ -2240,38 +2880,6 @@
 			"name": "CR-Silk @SPARKX i7-all",
 			"sub_path": "filament/CR-Silk @SPARKX i7-all.json"
 		},
-		{
-			"name": "CR-TPU @K1 Max_CFS-C-all",
-			"sub_path": "filament/CR-TPU @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "CR-TPU @K1C-all",
-			"sub_path": "filament/CR-TPU @K1C-all.json"
-		},
-		{
-			"name": "CR-TPU @K1C_CFS-C-all",
-			"sub_path": "filament/CR-TPU @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "CR-TPU @K1_CFS-C-all",
-			"sub_path": "filament/CR-TPU @K1_CFS-C-all.json"
-		},
-		{
-			"name": "CR-TPU @K2 Plus-all",
-			"sub_path": "filament/CR-TPU @K2 Plus-all.json"
-		},
-		{
-			"name": "CR-TPU @K2 Pro-all",
-			"sub_path": "filament/CR-TPU @K2 Pro-all.json"
-		},
-		{
-			"name": "CR-TPU @K2-all",
-			"sub_path": "filament/CR-TPU @K2-all.json"
-		},
-		{
-			"name": "CR-TPU @SPARKX i7-all",
-			"sub_path": "filament/CR-TPU @SPARKX i7-all.json"
-		},
 		{
 			"name": "CR-Wood @K1 Max_CFS-C-all",
 			"sub_path": "filament/CR-Wood @K1 Max_CFS-C-all.json"
@@ -2385,440 +2993,8 @@
 			"sub_path": "filament/Ender-PLA @SPARKX i7-all.json"
 		},
 		{
-			"name": "Generic ABS @Ender-3 V4-all",
-			"sub_path": "filament/Generic ABS @Ender-3 V4-all.json"
-		},
-		{
-			"name": "Generic ABS @Hi-all",
-			"sub_path": "filament/Generic ABS @Hi-all.json"
-		},
-		{
-			"name": "Generic ABS @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic ABS @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ABS @K1 SE-all",
-			"sub_path": "filament/Generic ABS @K1 SE-all.json"
-		},
-		{
-			"name": "Generic ABS @K1 SE_CFS-C-all",
-			"sub_path": "filament/Generic ABS @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ABS @K1C-all",
-			"sub_path": "filament/Generic ABS @K1C-all.json"
-		},
-		{
-			"name": "Generic ABS @K1C_CFS-C-all",
-			"sub_path": "filament/Generic ABS @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ABS @K1_CFS-C-all",
-			"sub_path": "filament/Generic ABS @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ABS @K2 Plus-all",
-			"sub_path": "filament/Generic ABS @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic ABS @K2 Pro-all",
-			"sub_path": "filament/Generic ABS @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic ABS @K2 SE-all",
-			"sub_path": "filament/Generic ABS @K2 SE-all.json"
-		},
-		{
-			"name": "Generic ABS @K2-all",
-			"sub_path": "filament/Generic ABS @K2-all.json"
-		},
-		{
-			"name": "Generic ASA @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic ASA @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ASA @K1 SE-all",
-			"sub_path": "filament/Generic ASA @K1 SE-all.json"
-		},
-		{
-			"name": "Generic ASA @K1 SE_CFS-C-all",
-			"sub_path": "filament/Generic ASA @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ASA @K1C-all",
-			"sub_path": "filament/Generic ASA @K1C-all.json"
-		},
-		{
-			"name": "Generic ASA @K1C_CFS-C-all",
-			"sub_path": "filament/Generic ASA @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ASA @K1_CFS-C-all",
-			"sub_path": "filament/Generic ASA @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic ASA @K2 Plus-all",
-			"sub_path": "filament/Generic ASA @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic ASA @K2 Pro-all",
-			"sub_path": "filament/Generic ASA @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic ASA @K2 SE-all",
-			"sub_path": "filament/Generic ASA @K2 SE-all.json"
-		},
-		{
-			"name": "Generic ASA @K2-all",
-			"sub_path": "filament/Generic ASA @K2-all.json"
-		},
-		{
-			"name": "Generic ASA-CF @K2 Plus-all",
-			"sub_path": "filament/Generic ASA-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic BVOH @Hi-all",
-			"sub_path": "filament/Generic BVOH @Hi-all.json"
-		},
-		{
-			"name": "Generic BVOH @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic BVOH @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic BVOH @K1C-all",
-			"sub_path": "filament/Generic BVOH @K1C-all.json"
-		},
-		{
-			"name": "Generic BVOH @K1C_CFS-C-all",
-			"sub_path": "filament/Generic BVOH @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic BVOH @K1_CFS-C-all",
-			"sub_path": "filament/Generic BVOH @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic BVOH @K2 Plus-all",
-			"sub_path": "filament/Generic BVOH @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic BVOH @K2 Pro-all",
-			"sub_path": "filament/Generic BVOH @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic BVOH @K2-all",
-			"sub_path": "filament/Generic BVOH @K2-all.json"
-		},
-		{
-			"name": "Generic HIPS @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic HIPS @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic HIPS @K1C-all",
-			"sub_path": "filament/Generic HIPS @K1C-all.json"
-		},
-		{
-			"name": "Generic HIPS @K1C_CFS-C-all",
-			"sub_path": "filament/Generic HIPS @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic HIPS @K1_CFS-C-all",
-			"sub_path": "filament/Generic HIPS @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic HIPS @K2 Plus-all",
-			"sub_path": "filament/Generic HIPS @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PA @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA @K1C-all",
-			"sub_path": "filament/Generic PA @K1C-all.json"
-		},
-		{
-			"name": "Generic PA @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PA @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA @K1_CFS-C-all",
-			"sub_path": "filament/Generic PA @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA @K2 Plus-all",
-			"sub_path": "filament/Generic PA @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA @K2 Pro-all",
-			"sub_path": "filament/Generic PA @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PA @K2-all",
-			"sub_path": "filament/Generic PA @K2-all.json"
-		},
-		{
-			"name": "Generic PA-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PA-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA-CF @K1C-all",
-			"sub_path": "filament/Generic PA-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PA-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PA-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PA-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PA-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA12-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PA12-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PA6-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K1C-all",
-			"sub_path": "filament/Generic PA6-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PA6-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PA6-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PA6-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA6-CF @K2 Pro-all",
-			"sub_path": "filament/Generic PA6-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PA6-GF @K2 Plus-all",
-			"sub_path": "filament/Generic PA6-GF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA612-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PA612-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PA612-CF @K2 Pro-all",
-			"sub_path": "filament/Generic PA612-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PAHT-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K1C-all",
-			"sub_path": "filament/Generic PAHT-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PAHT-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PAHT-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PAHT-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K2 Pro-all",
-			"sub_path": "filament/Generic PAHT-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PAHT-CF @K2-all",
-			"sub_path": "filament/Generic PAHT-CF @K2-all.json"
-		},
-		{
-			"name": "Generic PC @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PC @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PC @K1C-all",
-			"sub_path": "filament/Generic PC @K1C-all.json"
-		},
-		{
-			"name": "Generic PC @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PC @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PC @K1_CFS-C-all",
-			"sub_path": "filament/Generic PC @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PC @K2 Plus-all",
-			"sub_path": "filament/Generic PC @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PC @K2 Pro-all",
-			"sub_path": "filament/Generic PC @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PCTG @K2 Plus-all",
-			"sub_path": "filament/Generic PCTG @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PET @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PET @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET @K1C-all",
-			"sub_path": "filament/Generic PET @K1C-all.json"
-		},
-		{
-			"name": "Generic PET @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PET @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET @K1_CFS-C-all",
-			"sub_path": "filament/Generic PET @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET @K2 Plus-all",
-			"sub_path": "filament/Generic PET @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PET @K2 Pro-all",
-			"sub_path": "filament/Generic PET @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PET @K2-all",
-			"sub_path": "filament/Generic PET @K2-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PET-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K1C-all",
-			"sub_path": "filament/Generic PET-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PET-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PET-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PET-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PET-CF @K2 Pro-all",
-			"sub_path": "filament/Generic PET-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PETG @Ender-3 V4-all",
-			"sub_path": "filament/Generic PETG @Ender-3 V4-all.json"
-		},
-		{
-			"name": "Generic PETG @Hi-all",
-			"sub_path": "filament/Generic PETG @Hi-all.json"
-		},
-		{
-			"name": "Generic PETG @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PETG @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG @K1 SE-all",
-			"sub_path": "filament/Generic PETG @K1 SE-all.json"
-		},
-		{
-			"name": "Generic PETG @K1 SE_CFS-C-all",
-			"sub_path": "filament/Generic PETG @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG @K1C-all",
-			"sub_path": "filament/Generic PETG @K1C-all.json"
-		},
-		{
-			"name": "Generic PETG @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PETG @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG @K1_CFS-C-all",
-			"sub_path": "filament/Generic PETG @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG @K2 Plus-all",
-			"sub_path": "filament/Generic PETG @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PETG @K2 Pro-all",
-			"sub_path": "filament/Generic PETG @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PETG @K2 SE-all",
-			"sub_path": "filament/Generic PETG @K2 SE-all.json"
-		},
-		{
-			"name": "Generic PETG @K2-all",
-			"sub_path": "filament/Generic PETG @K2-all.json"
-		},
-		{
-			"name": "Generic PETG @SPARKX i7-all",
-			"sub_path": "filament/Generic PETG @SPARKX i7-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PETG-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K1C-all",
-			"sub_path": "filament/Generic PETG-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PETG-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PETG-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PETG-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K2 Pro-all",
-			"sub_path": "filament/Generic PETG-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @K2-all",
-			"sub_path": "filament/Generic PETG-CF @K2-all.json"
-		},
-		{
-			"name": "Generic PETG-CF @SPARKX i7-all",
-			"sub_path": "filament/Generic PETG-CF @SPARKX i7-all.json"
-		},
-		{
-			"name": "Generic PETG-GF @K2 Plus-all",
-			"sub_path": "filament/Generic PETG-GF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PETG-GF @K2 Pro-all",
-			"sub_path": "filament/Generic PETG-GF @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PETG-GF @K2-all",
-			"sub_path": "filament/Generic PETG-GF @K2-all.json"
+			"name": "Generic PLA @Creality",
+			"sub_path": "filament/Generic PLA @Creality.json"
 		},
 		{
 			"name": "Generic PLA @Ender-3 V4-all",
@@ -2872,6 +3048,14 @@
 			"name": "Generic PLA @SPARKX i7-all",
 			"sub_path": "filament/Generic PLA @SPARKX i7-all.json"
 		},
+		{
+			"name": "Generic PLA HF @Creality",
+			"sub_path": "filament/Generic PLA HF @Creality.json"
+		},
+		{
+			"name": "Generic PLA-CF @Creality",
+			"sub_path": "filament/Generic PLA-CF @Creality.json"
+		},
 		{
 			"name": "Generic PLA-CF @Ender-3 V4-all",
 			"sub_path": "filament/Generic PLA-CF @Ender-3 V4-all.json"
@@ -2973,173 +3157,13 @@
 			"sub_path": "filament/Generic PLA-Silk @SPARKX i7-all.json"
 		},
 		{
-			"name": "Generic PP @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PP @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PP @K1C-all",
-			"sub_path": "filament/Generic PP @K1C-all.json"
-		},
-		{
-			"name": "Generic PP @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PP @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PP @K1_CFS-C-all",
-			"sub_path": "filament/Generic PP @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PP @K2 Plus-all",
-			"sub_path": "filament/Generic PP @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PP @K2 Pro-all",
-			"sub_path": "filament/Generic PP @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PP @K2-all",
-			"sub_path": "filament/Generic PP @K2-all.json"
-		},
-		{
-			"name": "Generic PP-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PP-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PPS @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PPS @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS @K1C-all",
-			"sub_path": "filament/Generic PPS @K1C-all.json"
-		},
-		{
-			"name": "Generic PPS @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PPS @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS @K1_CFS-C-all",
-			"sub_path": "filament/Generic PPS @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS @K2 Plus-all",
-			"sub_path": "filament/Generic PPS @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PPS-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PPS-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS-CF @K1C-all",
-			"sub_path": "filament/Generic PPS-CF @K1C-all.json"
-		},
-		{
-			"name": "Generic PPS-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PPS-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS-CF @K1_CFS-C-all",
-			"sub_path": "filament/Generic PPS-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PPS-CF @K2 Plus-all",
-			"sub_path": "filament/Generic PPS-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PVA @Hi-all",
-			"sub_path": "filament/Generic PVA @Hi-all.json"
-		},
-		{
-			"name": "Generic PVA @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic PVA @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PVA @K1C-all",
-			"sub_path": "filament/Generic PVA @K1C-all.json"
-		},
-		{
-			"name": "Generic PVA @K1C_CFS-C-all",
-			"sub_path": "filament/Generic PVA @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PVA @K1_CFS-C-all",
-			"sub_path": "filament/Generic PVA @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic PVA @K2 Plus-all",
-			"sub_path": "filament/Generic PVA @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic PVA @K2 Pro-all",
-			"sub_path": "filament/Generic PVA @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic PVA @K2-all",
-			"sub_path": "filament/Generic PVA @K2-all.json"
-		},
-		{
-			"name": "Generic Support for PA @K2 Plus-all",
-			"sub_path": "filament/Generic Support for PA @K2 Plus-all.json"
+			"name": "Generic Speed PLA @Creality HF",
+			"sub_path": "filament/Generic Speed PLA @Creality HF.json"
 		},
 		{
 			"name": "Generic Support for PLA @K2 Plus-all",
 			"sub_path": "filament/Generic Support for PLA @K2 Plus-all.json"
 		},
-		{
-			"name": "Generic TPU 64D @K2 Plus-all",
-			"sub_path": "filament/Generic TPU 64D @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic TPU 64D @SPARKX i7-all",
-			"sub_path": "filament/Generic TPU 64D @SPARKX i7-all.json"
-		},
-		{
-			"name": "Generic TPU @Ender-3 V4-all",
-			"sub_path": "filament/Generic TPU @Ender-3 V4-all.json"
-		},
-		{
-			"name": "Generic TPU @K1 Max_CFS-C-all",
-			"sub_path": "filament/Generic TPU @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Generic TPU @K1 SE-all",
-			"sub_path": "filament/Generic TPU @K1 SE-all.json"
-		},
-		{
-			"name": "Generic TPU @K1 SE_CFS-C-all",
-			"sub_path": "filament/Generic TPU @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Generic TPU @K1C-all",
-			"sub_path": "filament/Generic TPU @K1C-all.json"
-		},
-		{
-			"name": "Generic TPU @K1C_CFS-C-all",
-			"sub_path": "filament/Generic TPU @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Generic TPU @K1_CFS-C-all",
-			"sub_path": "filament/Generic TPU @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Generic TPU @K2 Plus-all",
-			"sub_path": "filament/Generic TPU @K2 Plus-all.json"
-		},
-		{
-			"name": "Generic TPU @K2 Pro-all",
-			"sub_path": "filament/Generic TPU @K2 Pro-all.json"
-		},
-		{
-			"name": "Generic TPU @K2 SE-all",
-			"sub_path": "filament/Generic TPU @K2 SE-all.json"
-		},
-		{
-			"name": "Generic TPU @K2-all",
-			"sub_path": "filament/Generic TPU @K2-all.json"
-		},
-		{
-			"name": "Generic TPU @SPARKX i7-all",
-			"sub_path": "filament/Generic TPU @SPARKX i7-all.json"
-		},
 		{
 			"name": "HP Ultra PLA @K1 Max_CFS-C-all",
 			"sub_path": "filament/HP Ultra PLA @K1 Max_CFS-C-all.json"
@@ -3160,138 +3184,6 @@
 			"name": "HP Ultra PLA @K2 Plus-all",
 			"sub_path": "filament/HP Ultra PLA @K2 Plus-all.json"
 		},
-		{
-			"name": "HP-ASA @K1 Max_CFS-C-all",
-			"sub_path": "filament/HP-ASA @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "HP-ASA @K1C-all",
-			"sub_path": "filament/HP-ASA @K1C-all.json"
-		},
-		{
-			"name": "HP-ASA @K1C_CFS-C-all",
-			"sub_path": "filament/HP-ASA @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "HP-ASA @K1_CFS-C-all",
-			"sub_path": "filament/HP-ASA @K1_CFS-C-all.json"
-		},
-		{
-			"name": "HP-ASA @K2 Plus-all",
-			"sub_path": "filament/HP-ASA @K2 Plus-all.json"
-		},
-		{
-			"name": "HP-ASA @K2 Pro-all",
-			"sub_path": "filament/HP-ASA @K2 Pro-all.json"
-		},
-		{
-			"name": "HP-ASA @K2 SE-all",
-			"sub_path": "filament/HP-ASA @K2 SE-all.json"
-		},
-		{
-			"name": "HP-ASA @K2-all",
-			"sub_path": "filament/HP-ASA @K2-all.json"
-		},
-		{
-			"name": "HP-TPU @Ender-3 V4-all",
-			"sub_path": "filament/HP-TPU @Ender-3 V4-all.json"
-		},
-		{
-			"name": "HP-TPU @Hi-all",
-			"sub_path": "filament/HP-TPU @Hi-all.json"
-		},
-		{
-			"name": "HP-TPU @K1 Max_CFS-C-all",
-			"sub_path": "filament/HP-TPU @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "HP-TPU @K1 SE-all",
-			"sub_path": "filament/HP-TPU @K1 SE-all.json"
-		},
-		{
-			"name": "HP-TPU @K1 SE_CFS-C-all",
-			"sub_path": "filament/HP-TPU @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "HP-TPU @K1C-all",
-			"sub_path": "filament/HP-TPU @K1C-all.json"
-		},
-		{
-			"name": "HP-TPU @K1C_CFS-C-all",
-			"sub_path": "filament/HP-TPU @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "HP-TPU @K1_CFS-C-all",
-			"sub_path": "filament/HP-TPU @K1_CFS-C-all.json"
-		},
-		{
-			"name": "HP-TPU @K2 Plus-all",
-			"sub_path": "filament/HP-TPU @K2 Plus-all.json"
-		},
-		{
-			"name": "HP-TPU @K2 Pro-all",
-			"sub_path": "filament/HP-TPU @K2 Pro-all.json"
-		},
-		{
-			"name": "HP-TPU @K2 SE-all",
-			"sub_path": "filament/HP-TPU @K2 SE-all.json"
-		},
-		{
-			"name": "HP-TPU @K2-all",
-			"sub_path": "filament/HP-TPU @K2-all.json"
-		},
-		{
-			"name": "HP-TPU @SPARKX i7-all",
-			"sub_path": "filament/HP-TPU @SPARKX i7-all.json"
-		},
-		{
-			"name": "Hyper ABS @Ender-3 V4-all",
-			"sub_path": "filament/Hyper ABS @Ender-3 V4-all.json"
-		},
-		{
-			"name": "Hyper ABS @Hi-all",
-			"sub_path": "filament/Hyper ABS @Hi-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1 Max_CFS-C-all",
-			"sub_path": "filament/Hyper ABS @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1 SE-all",
-			"sub_path": "filament/Hyper ABS @K1 SE-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1 SE_CFS-C-all",
-			"sub_path": "filament/Hyper ABS @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1C-all",
-			"sub_path": "filament/Hyper ABS @K1C-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1C_CFS-C-all",
-			"sub_path": "filament/Hyper ABS @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper ABS @K1_CFS-C-all",
-			"sub_path": "filament/Hyper ABS @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper ABS @K2 Plus-all",
-			"sub_path": "filament/Hyper ABS @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper ABS @K2 Pro-all",
-			"sub_path": "filament/Hyper ABS @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper ABS @K2 SE-all",
-			"sub_path": "filament/Hyper ABS @K2 SE-all.json"
-		},
-		{
-			"name": "Hyper ABS @K2-all",
-			"sub_path": "filament/Hyper ABS @K2-all.json"
-		},
 		{
 			"name": "Hyper L-W PLA @Hi-all",
 			"sub_path": "filament/Hyper L-W PLA @Hi-all.json"
@@ -3396,158 +3288,6 @@
 			"name": "Hyper Marble @SPARKX i7-all",
 			"sub_path": "filament/Hyper Marble @SPARKX i7-all.json"
 		},
-		{
-			"name": "Hyper PA6-CF @K2 Plus-all",
-			"sub_path": "filament/Hyper PA6-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PA6-CF @K2 Pro-all",
-			"sub_path": "filament/Hyper PA6-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PA612-CF @K2 Plus-all",
-			"sub_path": "filament/Hyper PA612-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PA612-CF @K2 Pro-all",
-			"sub_path": "filament/Hyper PA612-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K1C-all",
-			"sub_path": "filament/Hyper PAHT-CF @K1C-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Hyper PAHT-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K1_CFS-C-all",
-			"sub_path": "filament/Hyper PAHT-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K2 Plus-all",
-			"sub_path": "filament/Hyper PAHT-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K2 Pro-all",
-			"sub_path": "filament/Hyper PAHT-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PAHT-CF @K2-all",
-			"sub_path": "filament/Hyper PAHT-CF @K2-all.json"
-		},
-		{
-			"name": "Hyper PC @K2 Plus-all",
-			"sub_path": "filament/Hyper PC @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PC @K2 Pro-all",
-			"sub_path": "filament/Hyper PC @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PETG @Ender-3 V4-all",
-			"sub_path": "filament/Hyper PETG @Ender-3 V4-all.json"
-		},
-		{
-			"name": "Hyper PETG @Hi-all",
-			"sub_path": "filament/Hyper PETG @Hi-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1 Max_CFS-C-all",
-			"sub_path": "filament/Hyper PETG @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1 SE-all",
-			"sub_path": "filament/Hyper PETG @K1 SE-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1 SE_CFS-C-all",
-			"sub_path": "filament/Hyper PETG @K1 SE_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1C-all",
-			"sub_path": "filament/Hyper PETG @K1C-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1C_CFS-C-all",
-			"sub_path": "filament/Hyper PETG @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG @K1_CFS-C-all",
-			"sub_path": "filament/Hyper PETG @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG @K2 Plus-all",
-			"sub_path": "filament/Hyper PETG @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PETG @K2 Pro-all",
-			"sub_path": "filament/Hyper PETG @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PETG @K2 SE-all",
-			"sub_path": "filament/Hyper PETG @K2 SE-all.json"
-		},
-		{
-			"name": "Hyper PETG @K2-all",
-			"sub_path": "filament/Hyper PETG @K2-all.json"
-		},
-		{
-			"name": "Hyper PETG @SPARKX i7-all",
-			"sub_path": "filament/Hyper PETG @SPARKX i7-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K1 Max_CFS-C-all",
-			"sub_path": "filament/Hyper PETG-CF @K1 Max_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K1C-all",
-			"sub_path": "filament/Hyper PETG-CF @K1C-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K1C_CFS-C-all",
-			"sub_path": "filament/Hyper PETG-CF @K1C_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K1_CFS-C-all",
-			"sub_path": "filament/Hyper PETG-CF @K1_CFS-C-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K2 Plus-all",
-			"sub_path": "filament/Hyper PETG-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K2 Pro-all",
-			"sub_path": "filament/Hyper PETG-CF @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @K2-all",
-			"sub_path": "filament/Hyper PETG-CF @K2-all.json"
-		},
-		{
-			"name": "Hyper PETG-CF @SPARKX i7-all",
-			"sub_path": "filament/Hyper PETG-CF @SPARKX i7-all.json"
-		},
-		{
-			"name": "Hyper PETG-GF @K1C-all",
-			"sub_path": "filament/Hyper PETG-GF @K1C-all.json"
-		},
-		{
-			"name": "Hyper PETG-GF @K2 Plus-all",
-			"sub_path": "filament/Hyper PETG-GF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PETG-GF @K2 Pro-all",
-			"sub_path": "filament/Hyper PETG-GF @K2 Pro-all.json"
-		},
-		{
-			"name": "Hyper PETG-GF @K2-all",
-			"sub_path": "filament/Hyper PETG-GF @K2-all.json"
-		},
 		{
 			"name": "Hyper PLA @Ender-3 V4-all",
 			"sub_path": "filament/Hyper PLA @Ender-3 V4-all.json"
@@ -3652,14 +3392,6 @@
 			"name": "Hyper PLA-CF @SPARKX i7-all",
 			"sub_path": "filament/Hyper PLA-CF @SPARKX i7-all.json"
 		},
-		{
-			"name": "Hyper PPA-CF @K2 Plus-all",
-			"sub_path": "filament/Hyper PPA-CF @K2 Plus-all.json"
-		},
-		{
-			"name": "Hyper PPA-CF @K2 Pro-all",
-			"sub_path": "filament/Hyper PPA-CF @K2 Pro-all.json"
-		},
 		{
 			"name": "Hyper Stardust @Hi-all",
 			"sub_path": "filament/Hyper Stardust @Hi-all.json"
@@ -3716,30 +3448,6 @@
 			"name": "PolySonic PLA Pro @K2 Plus-all",
 			"sub_path": "filament/PolySonic PLA Pro @K2 Plus-all.json"
 		},
-		{
-			"name": "Soleyin Basic PETG @Hi-all",
-			"sub_path": "filament/Soleyin Basic PETG @Hi-all.json"
-		},
-		{
-			"name": "Soleyin Basic PETG @K1C-all",
-			"sub_path": "filament/Soleyin Basic PETG @K1C-all.json"
-		},
-		{
-			"name": "Soleyin Basic PETG @K2 Plus-all",
-			"sub_path": "filament/Soleyin Basic PETG @K2 Plus-all.json"
-		},
-		{
-			"name": "Soleyin Basic PETG @K2 Pro-all",
-			"sub_path": "filament/Soleyin Basic PETG @K2 Pro-all.json"
-		},
-		{
-			"name": "Soleyin Basic PETG @K2-all",
-			"sub_path": "filament/Soleyin Basic PETG @K2-all.json"
-		},
-		{
-			"name": "Soleyin Basic PETG @SPARKX i7-all",
-			"sub_path": "filament/Soleyin Basic PETG @SPARKX i7-all.json"
-		},
 		{
 			"name": "Soleyin Ultra PLA @Ender-3 V4-all",
 			"sub_path": "filament/Soleyin Ultra PLA @Ender-3 V4-all.json"
@@ -3784,30 +3492,6 @@
 			"name": "Soleyin Ultra PLA @SPARKX i7-all",
 			"sub_path": "filament/Soleyin Ultra PLA @SPARKX i7-all.json"
 		},
-		{
-			"name": "eSUN ABS+ @K2 Plus-all",
-			"sub_path": "filament/eSUN ABS+ @K2 Plus-all.json"
-		},
-		{
-			"name": "eSUN ASA+ @K2 Plus-all",
-			"sub_path": "filament/eSUN ASA+ @K2 Plus-all.json"
-		},
-		{
-			"name": "eSUN PET-Basic @K2 Plus-all",
-			"sub_path": "filament/eSUN PET-Basic @K2 Plus-all.json"
-		},
-		{
-			"name": "eSUN PETG @K2 Plus-all",
-			"sub_path": "filament/eSUN PETG @K2 Plus-all.json"
-		},
-		{
-			"name": "eSUN PETG+HS @K2 Plus-all",
-			"sub_path": "filament/eSUN PETG+HS @K2 Plus-all.json"
-		},
-		{
-			"name": "eSUN PETG-Basic @K2 Plus-all",
-			"sub_path": "filament/eSUN PETG-Basic @K2 Plus-all.json"
-		},
 		{
 			"name": "eSUN PLA+ @K2 Plus-all",
 			"sub_path": "filament/eSUN PLA+ @K2 Plus-all.json"
@@ -3835,6 +3519,322 @@
 		{
 			"name": "eSUN PLA-Silk @K2 Plus-all",
 			"sub_path": "filament/eSUN PLA-Silk @K2 Plus-all.json"
+		},
+		{
+			"name": "CR-TPU @K1 Max_CFS-C-all",
+			"sub_path": "filament/CR-TPU @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "CR-TPU @K1C-all",
+			"sub_path": "filament/CR-TPU @K1C-all.json"
+		},
+		{
+			"name": "CR-TPU @K1C_CFS-C-all",
+			"sub_path": "filament/CR-TPU @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "CR-TPU @K1_CFS-C-all",
+			"sub_path": "filament/CR-TPU @K1_CFS-C-all.json"
+		},
+		{
+			"name": "CR-TPU @K2 Plus-all",
+			"sub_path": "filament/CR-TPU @K2 Plus-all.json"
+		},
+		{
+			"name": "CR-TPU @K2 Pro-all",
+			"sub_path": "filament/CR-TPU @K2 Pro-all.json"
+		},
+		{
+			"name": "CR-TPU @K2-all",
+			"sub_path": "filament/CR-TPU @K2-all.json"
+		},
+		{
+			"name": "CR-TPU @SPARKX i7-all",
+			"sub_path": "filament/CR-TPU @SPARKX i7-all.json"
+		},
+		{
+			"name": "Generic TPU 64D @K2 Plus-all",
+			"sub_path": "filament/Generic TPU 64D @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic TPU 64D @SPARKX i7-all",
+			"sub_path": "filament/Generic TPU 64D @SPARKX i7-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality",
+			"sub_path": "filament/Generic TPU @Creality.json"
+		},
+		{
+			"name": "Generic TPU @Ender-3 V4-all",
+			"sub_path": "filament/Generic TPU @Ender-3 V4-all.json"
+		},
+		{
+			"name": "Generic TPU @K1 Max_CFS-C-all",
+			"sub_path": "filament/Generic TPU @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "Generic TPU @K1 SE-all",
+			"sub_path": "filament/Generic TPU @K1 SE-all.json"
+		},
+		{
+			"name": "Generic TPU @K1 SE_CFS-C-all",
+			"sub_path": "filament/Generic TPU @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "Generic TPU @K1C-all",
+			"sub_path": "filament/Generic TPU @K1C-all.json"
+		},
+		{
+			"name": "Generic TPU @K1C_CFS-C-all",
+			"sub_path": "filament/Generic TPU @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "Generic TPU @K1_CFS-C-all",
+			"sub_path": "filament/Generic TPU @K1_CFS-C-all.json"
+		},
+		{
+			"name": "Generic TPU @K2 Plus-all",
+			"sub_path": "filament/Generic TPU @K2 Plus-all.json"
+		},
+		{
+			"name": "Generic TPU @K2 Pro-all",
+			"sub_path": "filament/Generic TPU @K2 Pro-all.json"
+		},
+		{
+			"name": "Generic TPU @K2 SE-all",
+			"sub_path": "filament/Generic TPU @K2 SE-all.json"
+		},
+		{
+			"name": "Generic TPU @K2-all",
+			"sub_path": "filament/Generic TPU @K2-all.json"
+		},
+		{
+			"name": "Generic TPU @SPARKX i7-all",
+			"sub_path": "filament/Generic TPU @SPARKX i7-all.json"
+		},
+		{
+			"name": "HP-TPU @Ender-3 V4-all",
+			"sub_path": "filament/HP-TPU @Ender-3 V4-all.json"
+		},
+		{
+			"name": "HP-TPU @Hi-all",
+			"sub_path": "filament/HP-TPU @Hi-all.json"
+		},
+		{
+			"name": "HP-TPU @K1 Max_CFS-C-all",
+			"sub_path": "filament/HP-TPU @K1 Max_CFS-C-all.json"
+		},
+		{
+			"name": "HP-TPU @K1 SE-all",
+			"sub_path": "filament/HP-TPU @K1 SE-all.json"
+		},
+		{
+			"name": "HP-TPU @K1 SE_CFS-C-all",
+			"sub_path": "filament/HP-TPU @K1 SE_CFS-C-all.json"
+		},
+		{
+			"name": "HP-TPU @K1C-all",
+			"sub_path": "filament/HP-TPU @K1C-all.json"
+		},
+		{
+			"name": "HP-TPU @K1C_CFS-C-all",
+			"sub_path": "filament/HP-TPU @K1C_CFS-C-all.json"
+		},
+		{
+			"name": "HP-TPU @K1_CFS-C-all",
+			"sub_path": "filament/HP-TPU @K1_CFS-C-all.json"
+		},
+		{
+			"name": "HP-TPU @K2 Plus-all",
+			"sub_path": "filament/HP-TPU @K2 Plus-all.json"
+		},
+		{
+			"name": "HP-TPU @K2 Pro-all",
+			"sub_path": "filament/HP-TPU @K2 Pro-all.json"
+		},
+		{
+			"name": "HP-TPU @K2 SE-all",
+			"sub_path": "filament/HP-TPU @K2 SE-all.json"
+		},
+		{
+			"name": "HP-TPU @K2-all",
+			"sub_path": "filament/HP-TPU @K2-all.json"
+		},
+		{
+			"name": "HP-TPU @SPARKX i7-all",
+			"sub_path": "filament/HP-TPU @SPARKX i7-all.json"
+		},
+		{
+			"name": "Generic ABS @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic ABS @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic ABS @Creality Hi-all",
+			"sub_path": "filament/Generic ABS @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic ABS @Creality K1-all",
+			"sub_path": "filament/Generic ABS @Creality K1-all.json"
+		},
+		{
+			"name": "Generic ABS @Creality K2-all",
+			"sub_path": "filament/Generic ABS @Creality K2-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic ASA @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality Hi-all",
+			"sub_path": "filament/Generic ASA @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality K1-all",
+			"sub_path": "filament/Generic ASA @Creality K1-all.json"
+		},
+		{
+			"name": "Generic ASA @Creality K2-all",
+			"sub_path": "filament/Generic ASA @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PA-CF @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PA-CF @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PA-CF @Creality K1-all",
+			"sub_path": "filament/Generic PA-CF @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PA-CF @Creality K2-all",
+			"sub_path": "filament/Generic PA-CF @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PC @Creality K1-all",
+			"sub_path": "filament/Generic PC @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PETG @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality Hi-all",
+			"sub_path": "filament/Generic PETG @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality K1-all",
+			"sub_path": "filament/Generic PETG @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PETG @Creality K2-all",
+			"sub_path": "filament/Generic PETG @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PLA @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PLA @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PLA @Creality Hi-all",
+			"sub_path": "filament/Generic PLA @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA @Creality K1-all",
+			"sub_path": "filament/Generic PLA @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PLA @Creality K2-all",
+			"sub_path": "filament/Generic PLA @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PLA-CF @Creality Hi-all",
+			"sub_path": "filament/Generic PLA-CF @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA-CF @Creality K1-all",
+			"sub_path": "filament/Generic PLA-CF @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PLA-CF @Creality K2-all",
+			"sub_path": "filament/Generic PLA-CF @Creality K2-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic TPU @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality Hi-all",
+			"sub_path": "filament/Generic TPU @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality K1-all",
+			"sub_path": "filament/Generic TPU @Creality K1-all.json"
+		},
+		{
+			"name": "Generic TPU @Creality K2-all",
+			"sub_path": "filament/Generic TPU @Creality K2-all.json"
+		},
+		{
+			"name": "Generic ASA-CF @Creality Hi-all",
+			"sub_path": "filament/Generic ASA-CF @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PETG-CF @Creality Hi-all",
+			"sub_path": "filament/Generic PETG-CF @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA High Speed @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PLA High Speed @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PLA Matte @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PLA Matte @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PLA Silk @Creality Ender-3V3-all",
+			"sub_path": "filament/Generic PLA Silk @Creality Ender-3V3-all.json"
+		},
+		{
+			"name": "Generic PLA High Speed @Creality Hi-all",
+			"sub_path": "filament/Generic PLA High Speed @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA Matte @Creality Hi-all",
+			"sub_path": "filament/Generic PLA Matte @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA Silk @Creality Hi-all",
+			"sub_path": "filament/Generic PLA Silk @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA Wood @Creality Hi-all",
+			"sub_path": "filament/Generic PLA Wood @Creality Hi-all.json"
+		},
+		{
+			"name": "Generic PLA High Speed @Creality K1-all",
+			"sub_path": "filament/Generic PLA High Speed @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PLA Matte @Creality K1-all",
+			"sub_path": "filament/Generic PLA Matte @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PLA Silk @Creality K1-all",
+			"sub_path": "filament/Generic PLA Silk @Creality K1-all.json"
+		},
+		{
+			"name": "Generic PLA High Speed @Creality K2-all",
+			"sub_path": "filament/Generic PLA High Speed @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PLA Matte @Creality K2-all",
+			"sub_path": "filament/Generic PLA Matte @Creality K2-all.json"
+		},
+		{
+			"name": "Generic PLA Silk @Creality K2-all",
+			"sub_path": "filament/Generic PLA Silk @Creality K2-all.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
 		}
 	],
 	"machine_list": [
@@ -4122,10 +4122,6 @@
 			"name": "Creality K1 (0.8 nozzle)",
 			"sub_path": "machine/Creality K1 (0.8 nozzle).json"
 		},
-		{
-			"name": "Creality K1_CFS-C 0.4 nozzle",
-			"sub_path": "machine/Creality K1_CFS-C 0.4 nozzle.json"
-		},
 		{
 			"name": "Creality K1 Max (0.4 nozzle)",
 			"sub_path": "machine/Creality K1 Max (0.4 nozzle).json"
@@ -4174,6 +4170,10 @@
 			"name": "Creality K1C_CFS-C 0.4 nozzle",
 			"sub_path": "machine/Creality K1C_CFS-C 0.4 nozzle.json"
 		},
+		{
+			"name": "Creality K1_CFS-C 0.4 nozzle",
+			"sub_path": "machine/Creality K1_CFS-C 0.4 nozzle.json"
+		},
 		{
 			"name": "Creality K2 0.2 nozzle",
 			"sub_path": "machine/Creality K2 0.2 nozzle.json"
@@ -4226,10 +4226,6 @@
 			"name": "Creality K2 SE 0.4 nozzle",
 			"sub_path": "machine/Creality K2 SE 0.4 nozzle.json"
 		},
-		{
-			"name": "Creality Sermoon V1 0.4 nozzle",
-			"sub_path": "machine/Creality Sermoon V1 0.4 nozzle.json"
-		},
 		{
 			"name": "Creality SPARKX i7 0.2 nozzle",
 			"sub_path": "machine/Creality SPARKX i7 0.2 nozzle.json"
@@ -4245,6 +4241,10 @@
 		{
 			"name": "Creality SPARKX i7 0.8 nozzle",
 			"sub_path": "machine/Creality SPARKX i7 0.8 nozzle.json"
+		},
+		{
+			"name": "Creality Sermoon V1 0.4 nozzle",
+			"sub_path": "machine/Creality Sermoon V1 0.4 nozzle.json"
 		}
 	]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json
index faa9404b3b..fe03c214e1 100644
--- a/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json	
@@ -1,177 +1,175 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @Ender-3 V4-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "3MchJTc47Au6MkZ0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
-    "pressure_advance": "0.024",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @Ender-3 V4-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "3MchJTc47Au6MkZ0",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
+	"pressure_advance": "0.024",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @Ender-5 Max-all.json b/resources/profiles/Creality/filament/CR-ABS @Ender-5 Max-all.json
deleted file mode 100644
index 53d18bfeda..0000000000
--- a/resources/profiles/Creality/filament/CR-ABS @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,160 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "iCeI2obXsgQdrmmd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "60"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/CR-ABS @Hi-all.json b/resources/profiles/Creality/filament/CR-ABS @Hi-all.json
index 10c1cce09d..98cb5ccd2a 100644
--- a/resources/profiles/Creality/filament/CR-ABS @Hi-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @Hi-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @Hi-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "OkztCpBxncDuPVQP",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "70"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @Hi-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "OkztCpBxncDuPVQP",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json
index 12afdde3cd..9ce194cf28 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "IuBXEntaBaPVFQXh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "IuBXEntaBaPVFQXh",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json
index 00340895f4..c463f498c8 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "yhGkKM6yZnFFn8IW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "yhGkKM6yZnFFn8IW",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json
index d80c98423f..f482eba998 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "ERk97K6VotgHJfWy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "ERk97K6VotgHJfWy",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1C-all.json
index f41b1bb940..b61bdae377 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "HaRbfdv0e9gKF3Qp",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "HaRbfdv0e9gKF3Qp",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json
index f91677ab31..8707ea2a53 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1C_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "jhNERXYu8aq28Ppb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1C_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "jhNERXYu8aq28Ppb",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json
index b83d103747..73b8b024d1 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K1_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "3irrf86tjxODkbIf",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K1_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "3irrf86tjxODkbIf",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json
index d807936bfc..10bdfa06e1 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K2 Plus-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "5CD3YjRfabJ1lA6a",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K2 Plus-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "5CD3YjRfabJ1lA6a",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json
index b6334a93b6..ea99164d21 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K2 Pro-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "QuBAuyBqoGyFHMpP",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle",
-        "Creality K2 Pro 0.6 nozzle",
-        "Creality K2 Pro 0.8 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K2 Pro-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "QuBAuyBqoGyFHMpP",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle",
+		"Creality K2 Pro 0.6 nozzle",
+		"Creality K2 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json
index f49bf5dd93..07b9274321 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K2 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "8hrvutX54fd4gUGn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K2 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "8hrvutX54fd4gUGn",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-ABS @K2-all.json b/resources/profiles/Creality/filament/CR-ABS @K2-all.json
index d0f92634b1..2ffd9662f3 100644
--- a/resources/profiles/Creality/filament/CR-ABS @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-ABS @K2-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "CR-ABS @K2-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "rvItkEWAJNGXJrVF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle",
-        "Creality K2 0.6 nozzle",
-        "Creality K2 0.8 nozzle"
-    ],
-    "filament_id": "OFGwZmgS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-ABS @K2-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "rvItkEWAJNGXJrVF",
+	"filament_id": "OFGwZmgS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle",
+		"Creality K2 0.6 nozzle",
+		"Creality K2 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json b/resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json
deleted file mode 100644
index e4e5cad0e8..0000000000
--- a/resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,185 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-Nylon @Ender-5 Max-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "HHnHotIUIBzTdckU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "100"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.9"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "0.2"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "45"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "50"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "5"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json
index bc9719ad07..30c7842edb 100644
--- a/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json	
@@ -1,191 +1,189 @@
 {
-    "type": "filament",
-    "name": "CR-Nylon @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "vRp7fYNhHQuLUArq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "52"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFvLppPU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Nylon @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "vRp7fYNhHQuLUArq",
+	"filament_id": "OFvLppPU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json
index bf9ce0c9e1..a95d8b9b3b 100644
--- a/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json	
@@ -1,192 +1,190 @@
 {
-    "type": "filament",
-    "name": "CR-Nylon @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "IAXnmE8e2ADhcMZG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "52"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFvLppPU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Nylon @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "IAXnmE8e2ADhcMZG",
+	"filament_id": "OFvLppPU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json
index e2a7ef32fa..71b5cceb41 100644
--- a/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json	
@@ -1,192 +1,190 @@
 {
-    "type": "filament",
-    "name": "CR-Nylon @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "vIpGcKrZM6vbICRT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "52"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFvLppPU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Nylon @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "vIpGcKrZM6vbICRT",
+	"filament_id": "OFvLppPU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json
index 48747723f0..e3b4dc6f21 100644
--- a/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json	
@@ -1,192 +1,190 @@
 {
-    "type": "filament",
-    "name": "CR-Nylon @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "eb1T3avlK6EzZ5NT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "52"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFvLppPU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Nylon @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "eb1T3avlK6EzZ5NT",
+	"filament_id": "OFvLppPU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json
index d665bb8d16..ba322bd8c7 100644
--- a/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json	
@@ -1,198 +1,196 @@
 {
-    "type": "filament",
-    "name": "CR-Nylon @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "LLuS5zOOxSWnZoyb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "52"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "16"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.064",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFvLppPU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Nylon @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "LLuS5zOOxSWnZoyb",
+	"filament_id": "OFvLppPU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.064",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json
index bfa6bd0bc7..82d0370573 100644
--- a/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @Ender-3 V4-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "ZucTDurgG1yttTTE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @Ender-3 V4-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "ZucTDurgG1yttTTE",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Ender-5 Max-all.json b/resources/profiles/Creality/filament/CR-PETG @Ender-5 Max-all.json
deleted file mode 100644
index 0514484af8..0000000000
--- a/resources/profiles/Creality/filament/CR-PETG @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "jMfevCqhjSPahBHJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,220],[5.0,240],[10.0,250]]",
-    "pressure_advance": "0.05",
-    "filament_id": "06101",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/CR-PETG @Hi-all.json b/resources/profiles/Creality/filament/CR-PETG @Hi-all.json
index 4b3ab33892..6a37e9a7e3 100644
--- a/resources/profiles/Creality/filament/CR-PETG @Hi-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @Hi-all.json	
@@ -1,152 +1,150 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @Hi-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "DGnnBUZoF5EJdo8y",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[4.0,225],[7.0,230],[10.0,240]]",
-    "pressure_advance": "0.072",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.2 nozzle",
-        "Creality Hi 0.4 nozzle",
-        "Creality Hi 0.6 nozzle",
-        "Creality Hi 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @Hi-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "DGnnBUZoF5EJdo8y",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[4.0,225],[7.0,230],[10.0,240]]",
+	"pressure_advance": "0.072",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.2 nozzle",
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle",
+		"Creality Hi 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json
index bc597f92b3..873e8c8174 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "7zmI8UK4VCbkrHth",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
-    "pressure_advance": "0.078",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "7zmI8UK4VCbkrHth",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
+	"pressure_advance": "0.078",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json
index 1c92de9916..18de1bb62f 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "oR9hRU1vmcDXuEdN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "85"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "9"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "85"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "85"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "oR9hRU1vmcDXuEdN",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"85"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"85"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"85"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json
index be3983b772..4732ece2ae 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "O5oj2seoJOMoRQeH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "85"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "9"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "85"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "85"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "O5oj2seoJOMoRQeH",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"85"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"85"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"85"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1C-all.json
index 2829598e5a..6bb86df975 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "TCoincnHkpTkdbgr",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
-    "pressure_advance": "0.062",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "TCoincnHkpTkdbgr",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
+	"pressure_advance": "0.062",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json
index a6ee2af473..537ab817e9 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1C_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "tEizEoyTjR2jsMjb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
-    "pressure_advance": "0.062",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1C_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "tEizEoyTjR2jsMjb",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
+	"pressure_advance": "0.062",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json
index d05baf33af..936ec3ba8c 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K1_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "GyuPdDlFigxqfNdh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
-    "pressure_advance": "0.072",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K1_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "GyuPdDlFigxqfNdh",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],  [1.2,220],  [1.3,250]]",
+	"pressure_advance": "0.072",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json
index ead310f41c..4a9e23750b 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K2 Plus-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "L9YgZiTMEbGueIUB",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K2 Plus-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "L9YgZiTMEbGueIUB",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json
index b73011595f..a7a5eec9be 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K2 Pro-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "cpZpusYQklJHwF7C",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle",
-        "Creality K2 Pro 0.6 nozzle",
-        "Creality K2 Pro 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K2 Pro-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "cpZpusYQklJHwF7C",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle",
+		"Creality K2 Pro 0.6 nozzle",
+		"Creality K2 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json
index 2137f18ef6..6c2a833714 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K2 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "wszfgAr4wGMhfak4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "85"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K2 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "wszfgAr4wGMhfak4",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"85"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @K2-all.json b/resources/profiles/Creality/filament/CR-PETG @K2-all.json
index 16bd7c7053..c53735d1d4 100644
--- a/resources/profiles/Creality/filament/CR-PETG @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @K2-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @K2-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "twFraQUSFLNuYrQd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle",
-        "Creality K2 0.6 nozzle",
-        "Creality K2 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @K2-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "twFraQUSFLNuYrQd",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle",
+		"Creality K2 0.6 nozzle",
+		"Creality K2 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json
index befe270b95..a5ae82bc50 100644
--- a/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json	
@@ -1,139 +1,137 @@
 {
-    "type": "filament",
-    "name": "CR-PETG @SPARKX i7-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "RFW04K7trMKi3cYq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[1.0,205],[1.2,220]]",
-    "pressure_advance": "0.3",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.2 nozzle",
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OF3WQaKK"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PETG @SPARKX i7-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "RFW04K7trMKi3cYq",
+	"filament_id": "OF3WQaKK",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[1.0,205],[1.2,220]]",
+	"pressure_advance": "0.3",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.2 nozzle",
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json
index 83548daafd..5b3868f3be 100644
--- a/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "hy5Zpwpkx46UQlFy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "hy5Zpwpkx46UQlFy",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @Ender-5 Max-all.json b/resources/profiles/Creality/filament/CR-PLA @Ender-5 Max-all.json
deleted file mode 100644
index 68fa08da55..0000000000
--- a/resources/profiles/Creality/filament/CR-PLA @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,157 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "sU0HCPjQoOLHPmPc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "1",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/CR-PLA @Hi-all.json b/resources/profiles/Creality/filament/CR-PLA @Hi-all.json
index 0dc26b51ba..89c8609ea5 100644
--- a/resources/profiles/Creality/filament/CR-PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @Hi-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "2g9MEZ7yniK64tVA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.2 nozzle",
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "2g9MEZ7yniK64tVA",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.2 nozzle",
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json
index 84fb331f5b..b606e1ba81 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "rkd11EbVutxkB4Yy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "rkd11EbVutxkB4Yy",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json
index 1f5d2b746a..37191e5b4b 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "dFig6q8KlgjU4stK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "70%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "dFig6q8KlgjU4stK",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json
index f8517e48b5..cf13c1845e 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "2sTv8VK78NAkgv22",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "70%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "2sTv8VK78NAkgv22",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1C-all.json
index 092a18533d..e5f40ce73b 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "3chsaV1fugQudOqC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "3chsaV1fugQudOqC",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json
index e564114150..8e3aff7029 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Xu46QkbGLqe9nSxT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Xu46QkbGLqe9nSxT",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json
index 2796306e7f..a9bb576d9a 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "dDLVUGD8AqxJuSb2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "dDLVUGD8AqxJuSb2",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json
index a175fcdb46..48d6542c23 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "FsNcay7aLjZKGih8",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "FsNcay7aLjZKGih8",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json
index b30c6e90fe..c97cda56fa 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "yXWDlqzGqqIg2tbx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "yXWDlqzGqqIg2tbx",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json
index 4de70e5062..c3fe4a1f36 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "j8Iaz6y4iiOw2I5n",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "j8Iaz6y4iiOw2I5n",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @K2-all.json b/resources/profiles/Creality/filament/CR-PLA @K2-all.json
index 26a62766b0..fbcb4cfb49 100644
--- a/resources/profiles/Creality/filament/CR-PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @K2-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "7f0r4XOgIhVG2OPH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "7f0r4XOgIhVG2OPH",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json
index ad5aad1c66..a4cbf4f3f9 100644
--- a/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "CR-PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "G1KqKgylj61LrtiS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[1.2,220]]",
-    "pressure_advance": "0.032",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFp4ETDP"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "G1KqKgylj61LrtiS",
+	"filament_id": "OFp4ETDP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[1.2,220]]",
+	"pressure_advance": "0.032",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json
index cfc58c9cf8..09421321fe 100644
--- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Carbon @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "VzHBAqKC0WWSEga0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFrM4hdm"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Carbon @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "VzHBAqKC0WWSEga0",
+	"filament_id": "OFrM4hdm",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json
index e6eaf070f8..ec102d33a4 100644
--- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Carbon @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "2ve6KpyKswcbHPJi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFrM4hdm"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Carbon @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "2ve6KpyKswcbHPJi",
+	"filament_id": "OFrM4hdm",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json
index 2e369e8a3c..1b363a0c68 100644
--- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Carbon @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "MbgilTqqbN9QZvtq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFrM4hdm"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Carbon @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MbgilTqqbN9QZvtq",
+	"filament_id": "OFrM4hdm",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json
index 47bfd16093..4847bc1620 100644
--- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Carbon @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "e5ACy8cJonV9q1pe",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFrM4hdm"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Carbon @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "e5ACy8cJonV9q1pe",
+	"filament_id": "OFrM4hdm",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json
index b7fb77695e..3a8c3cf1ca 100644
--- a/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Carbon @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ua3BCvZtfYAgH7nN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFrM4hdm"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Carbon @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ua3BCvZtfYAgH7nN",
+	"filament_id": "OFrM4hdm",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json
index ee3510a9cc..761fd855b4 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "njQE4bpSlZHrCqrg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "njQE4bpSlZHrCqrg",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json
index 22d113814a..4bc597182f 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "eCuLoIdPsTEiLxZB",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "eCuLoIdPsTEiLxZB",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json
index 59bf2e48e6..384e74eb75 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "5vTZFUcLv6DL06Nr",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "5vTZFUcLv6DL06Nr",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json
index 4a3a27bfb5..ae580ced18 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "HDRiQNtbO8jZR6tW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HDRiQNtbO8jZR6tW",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json
index 5b3aaccd1f..fc0b3e724a 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "gKRZWt2XVBGFoQ6t",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "gKRZWt2XVBGFoQ6t",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json
index c2dbe07744..b54f3e6745 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "yGc6fpse4MyUXWXa",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "yGc6fpse4MyUXWXa",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json
index 98a41262c4..179e2c9421 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "BJwFbpJ8baT3vyEU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BJwFbpJ8baT3vyEU",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json
index 759d5cbd88..69dd52a125 100644
--- a/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Fluo @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "0xviyTPYLAxrpVGK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFgpQwkk"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Fluo @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "0xviyTPYLAxrpVGK",
+	"filament_id": "OFgpQwkk",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json
index 1ed05bed21..2ec7cab65d 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "0edq8qWqKaGPZc1t",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "0edq8qWqKaGPZc1t",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json
index 80373199ad..c18a9dc8c4 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ZFXelUe4vcYytBIg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ZFXelUe4vcYytBIg",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json
index ac4a9fc0ff..cde0fa3c9b 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "mQDyxAEILwLuFWAw",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "mQDyxAEILwLuFWAw",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json
index cd8ea92f5a..4773356cc7 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "38NjxetvurFFPPEy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "38NjxetvurFFPPEy",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json
index 1779ce9a54..76654b9172 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "KFNeCYp4ck8diZRG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "KFNeCYp4ck8diZRG",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.1,190],  [1.5,190],  [1.6,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json
index ebfe70bac1..ae46802d71 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "WXOXHiNp1tvh4Y5T",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "WXOXHiNp1tvh4Y5T",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json
index 90436b9e4b..adc321314c 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "LNN1w66GDTFxTCMq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "LNN1w66GDTFxTCMq",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json
index b2bc9f1bc4..9569a1ce13 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "nk9dxS7bcChQ26pZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nk9dxS7bcChQ26pZ",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json
index 5cf37492a4..7ada0c085a 100644
--- a/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json	
@@ -1,170 +1,168 @@
 {
-    "type": "filament",
-    "name": "CR-PLA Matte @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "NNx1aU5NjcyeKPec",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.23",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.2 nozzle",
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OFM0xjBG"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-PLA Matte @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NNx1aU5NjcyeKPec",
+	"filament_id": "OFM0xjBG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.23",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.2 nozzle",
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json
index 494d7245c9..9f62ca07bc 100644
--- a/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "96xBgfns6PJljRBO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "96xBgfns6PJljRBO",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @Ender-5 Max-all.json b/resources/profiles/Creality/filament/CR-Silk @Ender-5 Max-all.json
deleted file mode 100644
index 41047d385c..0000000000
--- a/resources/profiles/Creality/filament/CR-Silk @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,157 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-Silk @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "vFgKdtdiuqqrL9rk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/CR-Silk @Hi-all.json b/resources/profiles/Creality/filament/CR-Silk @Hi-all.json
index 497ddcd169..2d811b10f5 100644
--- a/resources/profiles/Creality/filament/CR-Silk @Hi-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @Hi-all.json	
@@ -1,145 +1,143 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "tCMjuQOR2yj66jPW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
-    "pressure_advance": "0.026",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "tCMjuQOR2yj66jPW",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
+	"pressure_advance": "0.026",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json
index bffe643c8c..23e8a0762d 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ljLSobQ4S3BAkBNk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ljLSobQ4S3BAkBNk",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json
index 39ba90b647..04624cfc25 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json	
@@ -1,147 +1,145 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "jHEDkgKkZAy21Ali",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "jHEDkgKkZAy21Ali",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json
index 33b0ddc999..0755c45631 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json	
@@ -1,147 +1,145 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GbHXYf8i8km1Ox5r",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GbHXYf8i8km1Ox5r",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1C-all.json
index 7ba2624bae..ea9fad8877 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1C-all.json	
@@ -1,162 +1,160 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "I4LxzBtRIwagIQUJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "I4LxzBtRIwagIQUJ",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json
index ddbf57b5f2..6150166773 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "JMpBkMELewelYBDU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JMpBkMELewelYBDU",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json
index 3e0e45cd87..47b4468887 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "dVxmGRP36D3lampi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "dVxmGRP36D3lampi",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json
index a2320f3f4e..d1d211884e 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "8mKZzYS3ykGEMqjH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "8mKZzYS3ykGEMqjH",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json
index 4c1f433c61..75c276d993 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "KBVdrZA7bYRpGztN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "KBVdrZA7bYRpGztN",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json
index 9c1415001b..b598e9df65 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "0bvCEevcKO0uubLD",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "0bvCEevcKO0uubLD",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @K2-all.json b/resources/profiles/Creality/filament/CR-Silk @K2-all.json
index 97e5d7da31..49486812c4 100644
--- a/resources/profiles/Creality/filament/CR-Silk @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @K2-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "MXAd3uHJUNHLFA4i",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MXAd3uHJUNHLFA4i",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json
index 11a92b0357..e3c2ae9f62 100644
--- a/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "CR-Silk @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "A30ICaD1Lz0cWkEH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.13",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.2 nozzle",
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OF3OMgrI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Silk @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "A30ICaD1Lz0cWkEH",
+	"filament_id": "OF3OMgrI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.13",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.2 nozzle",
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json
index 8ad140c757..8e5ab63281 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "KkOkqdyd9DekhhNx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "KkOkqdyd9DekhhNx",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K1C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1C-all.json
index 001f3c5e5c..5740a6c8fb 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K1C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K1C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "7IDbEU7GXQfJbFQz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K1C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "7IDbEU7GXQfJbFQz",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json
index 9d10ae7b5c..60f72ca75e 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K1C_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "m33d4hGzs5ZC1faF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K1C_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "m33d4hGzs5ZC1faF",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json
index 5be19a6852..526fc9daad 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K1_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "kt3VziPx3umU4Q5R",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K1_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "kt3VziPx3umU4Q5R",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json
index b79e38758b..c68afd06dc 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json	
@@ -1,170 +1,168 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K2 Plus-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "KioNr9VhBOnLMtnm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.02"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.34",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K2 Plus-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "KioNr9VhBOnLMtnm",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.34",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json
index e3ea591f17..5e1ca5fef1 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json	
@@ -1,175 +1,173 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K2 Pro-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "8akFfk1Evt6aKtRL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "24"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.02"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.34",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K2 Pro-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "8akFfk1Evt6aKtRL",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"24"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.34",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @K2-all.json b/resources/profiles/Creality/filament/CR-TPU @K2-all.json
index a336ca1e66..5ba623ff46 100644
--- a/resources/profiles/Creality/filament/CR-TPU @K2-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @K2-all.json	
@@ -1,175 +1,173 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @K2-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "ZXIOQXEGhsUn2x8j",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "24"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @K2-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "ZXIOQXEGhsUn2x8j",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"24"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json
index 3b6e8923eb..ca5cb0fbfc 100644
--- a/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "CR-TPU @SPARKX i7-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "mCfhjDYJc8oh3k2X",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.12"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "1.8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.34",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFG2RkhN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-TPU @SPARKX i7-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "mCfhjDYJc8oh3k2X",
+	"filament_id": "OFG2RkhN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.12"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"1.8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.34",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json
index 2d59b01143..3b695ef493 100644
--- a/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "CR-Wood @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "vIzshYLqN5j6pkDn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.22"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGxC8gB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Wood @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "vIzshYLqN5j6pkDn",
+	"filament_id": "OFGxC8gB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Wood @K1C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1C-all.json
index 20477f04a9..ee30ee419d 100644
--- a/resources/profiles/Creality/filament/CR-Wood @K1C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Wood @K1C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Wood @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zSfzwta4F6MAXAn7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.22"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFGxC8gB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Wood @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zSfzwta4F6MAXAn7",
+	"filament_id": "OFGxC8gB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json
index 95dc4f4c95..a36e476dd4 100644
--- a/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Wood @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "5n4iNCttBHmnXKaT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.22"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGxC8gB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Wood @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "5n4iNCttBHmnXKaT",
+	"filament_id": "OFGxC8gB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json
index e029b37f79..eac27b5a22 100644
--- a/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "CR-Wood @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "kBGvS0Npk3V5eY8j",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.22"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGxC8gB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Wood @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "kBGvS0Npk3V5eY8j",
+	"filament_id": "OFGxC8gB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json
index aa7a1f5eee..160a0cd258 100644
--- a/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "CR-Wood @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "NFRGg9wmbojJ0Ye9",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.22"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFGxC8gB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "CR-Wood @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NFRGg9wmbojJ0Ye9",
+	"filament_id": "OFGxC8gB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json
index cb50c6f7fb..91bd548a37 100644
--- a/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json	
@@ -43,7 +43,6 @@
 	],
 	"filament_flow_ratio": "0.92",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -73,7 +72,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json
index 6a71e56fff..3333526fd3 100644
--- a/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json	
@@ -43,7 +43,6 @@
 	],
 	"filament_flow_ratio": "0.97",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json
index d44e4d96bf..eed4198aea 100644
--- a/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json	
@@ -43,7 +43,6 @@
 	],
 	"filament_flow_ratio": "0.9",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -73,7 +72,6 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json
index d8a060f9b5..24b7aec597 100644
--- a/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json	
@@ -43,7 +43,6 @@
 	],
 	"filament_flow_ratio": "0.85",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -73,7 +72,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json
index a7c696718f..6a01014a09 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "158lgUy4NWVKp625",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "90"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "158lgUy4NWVKp625",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"90"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json
index c680265601..68a1c41f23 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GGgjz1BfWVm9G9oO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "90"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GGgjz1BfWVm9G9oO",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"90"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json
index 50816aed69..fac99aa191 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "gZVVoUCJ7QRhAHjO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "90"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "gZVVoUCJ7QRhAHjO",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"90"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json
index 43728032ef..6ff1d73bc7 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Av0kmRfBxzfEtFMI",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "90"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Av0kmRfBxzfEtFMI",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"90"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json
index 25642697d9..7df41a79d8 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "8jntA1DA7UKpFB5D",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "8jntA1DA7UKpFB5D",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json
index 16a318a1e0..45ac03cfdc 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "xIghXweOHDN6eUJA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "xIghXweOHDN6eUJA",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json
index e9693dabcc..1b3877c95f 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "knIpfA9wHBoyClD9",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "knIpfA9wHBoyClD9",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json b/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json
index e19e06f40e..22552b9ec9 100644
--- a/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json	
@@ -1,170 +1,168 @@
 {
-    "type": "filament",
-    "name": "EN-PLA+ @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "noCevEGFMtClqvDZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFks6esg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "EN-PLA+ @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "noCevEGFMtClqvDZ",
+	"filament_id": "OFks6esg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json
index 3fd9b4ef24..4c3854163c 100644
--- a/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "ENDER FAST PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ZK9la4OwCbY6P1Ka",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "24"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.3"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFfSqS4R"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "ENDER FAST PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ZK9la4OwCbY6P1Ka",
+	"filament_id": "OFfSqS4R",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"24"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json
index a27a828dfb..cf7a5ef46a 100644
--- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "ENDER FAST PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "aX5GTeSuTe2xMM6U",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "6"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "53"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFfSqS4R"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "ENDER FAST PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "aX5GTeSuTe2xMM6U",
+	"filament_id": "OFfSqS4R",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"53"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json
index 4f831d47ab..f9d5b70345 100644
--- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "ENDER FAST PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "rPu8RtmT8ketxiKn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "24"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFfSqS4R"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "ENDER FAST PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "rPu8RtmT8ketxiKn",
+	"filament_id": "OFfSqS4R",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"24"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json
index 9c2fd90d30..cc020aeb91 100644
--- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "ENDER FAST PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "KXmnvtnGjZiXVYVs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "24"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFfSqS4R"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "ENDER FAST PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "KXmnvtnGjZiXVYVs",
+	"filament_id": "OFfSqS4R",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"24"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json
index c96ff98d72..e365bffac4 100644
--- a/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "ENDER FAST PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "EOJUiD8x2hx3y4HO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "53"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFfSqS4R"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "ENDER FAST PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "EOJUiD8x2hx3y4HO",
+	"filament_id": "OFfSqS4R",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"53"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json
index 711b1b22a7..bfd0581d4a 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json	
@@ -1,147 +1,145 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "4ZsPBPTcW7Nbud94",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.024",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4ZsPBPTcW7Nbud94",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.024",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json b/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json
index 27ea82bdd3..011f599d96 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "3cpofydFoBjnKdNH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "3cpofydFoBjnKdNH",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json
index ed995443e3..88a1f5a286 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "CHtytKAUVFpAy8Qm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "CHtytKAUVFpAy8Qm",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json
index c220fa54ac..20407c7014 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "xnFY6LUmvd7zH1kQ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "xnFY6LUmvd7zH1kQ",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json
index 2471ec31bb..2c5af7fd59 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Q3cb72JAry8Nj9Jc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Q3cb72JAry8Nj9Jc",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json
index f10bf01177..5e3bbc2075 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "tITLcxwReOtBn4un",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "tITLcxwReOtBn4un",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],  [1.1,210],  [1.4,220]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json
index 51b85450b3..2215821808 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json	
@@ -1,152 +1,150 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "CZfEiMPan3Lz1qK6",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "CZfEiMPan3Lz1qK6",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json
index 8e04e8fee9..f2bd325441 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "QqeD0acLtTx3o8hq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "QqeD0acLtTx3o8hq",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2-all.json
index b26145bea9..364a6e25a8 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @K2-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "r81gYSIP0AGeFowj",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "r81gYSIP0AGeFowj",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json
index 11a85cc128..7cf95acc28 100644
--- a/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Ender-PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "I8mV3hBRdyGTSqgt",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.034",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFWao3Ic"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Ender-PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "I8mV3hBRdyGTSqgt",
+	"filament_id": "OFWao3Ic",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.034",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json
index 5a6f7a93c9..f385b23057 100644
--- a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic ABS @Ender-5Max-all;Creality Generic ABS Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "qurtvw5OhkVfgpaC",
 	"filament_id": "OFY9muEs",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "0.85",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json
index d1f8662025..0c1700464a 100644
--- a/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @Ender-3 V4-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "4uYoekJTerUnoYl8",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
-    "pressure_advance": "0.026",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @Ender-3 V4-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "4uYoekJTerUnoYl8",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "90",
+	"customized_plate_temp_initial_layer": "90",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
+	"pressure_advance": "0.026",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic ABS @Ender-5 Max-all.json
deleted file mode 100644
index ca7518e9b3..0000000000
--- a/resources/profiles/Creality/filament/Generic ABS @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "3BjyaE4hGrz7tqnk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "60"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.034",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic ABS @Hi-all.json b/resources/profiles/Creality/filament/Generic ABS @Hi-all.json
index 9f43259110..dad6fd75a7 100644
--- a/resources/profiles/Creality/filament/Generic ABS @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @Hi-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @Hi-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "9z0uoXnHksedYsyq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "70"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @Hi-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "9z0uoXnHksedYsyq",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json
index 4d1de77b9e..47623ecde9 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "VF8DUfOECtADXXXT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "VF8DUfOECtADXXXT",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json
index 974ca3a49a..f69924da6e 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "6tqh2NX6hGdsR8Gy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "6tqh2NX6hGdsR8Gy",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json
index 8fa83c2dbf..7c54336fe3 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "D95cc9TGmWbPC8em",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "D95cc9TGmWbPC8em",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1C-all.json
index 0d8c23a2e7..5f883ca259 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "CGDrkpaby0ZdpoSH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "CGDrkpaby0ZdpoSH",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json
index 888b283059..1877f70bc7 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1C_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "eMQXlXLK9wyeqYEx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1C_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "eMQXlXLK9wyeqYEx",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json
index 58d749dea3..2621ca7398 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K1_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "3YcpDd1XsJKf2T02",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K1_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "3YcpDd1XsJKf2T02",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json
index 425411f466..93a01f5a2d 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K2 Plus-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "ju8Vp3ee2mBYGzKr",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K2 Plus-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "ju8Vp3ee2mBYGzKr",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json
index a03c0fbfcb..7b20d35951 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K2 Pro-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "CKz3942iA5I2gfaA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K2 Pro-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "CKz3942iA5I2gfaA",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json
index 846dc3b748..b711a5eefd 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K2 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "PdjEPWVOSloevfUZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K2 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "PdjEPWVOSloevfUZ",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Generic ABS @K2-all.json
index 0eefa273a9..15ecff7328 100644
--- a/resources/profiles/Creality/filament/Generic ABS @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic ABS @K2-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic ABS @K2-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "v8K9u7osBIzsrQCh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFY9muEs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ABS @K2-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "v8K9u7osBIzsrQCh",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json
index 0fa424b522..66cb8a6eb8 100644
--- a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic ASA @Ender-5Max-all;Creality Generic ASA Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "7qyRWm8KXa1YUPpl",
 	"filament_id": "OFLPAxz3",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "0.85",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"ASA"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic ASA @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic ASA @Ender-5 Max-all.json
deleted file mode 100644
index 85251468b0..0000000000
--- a/resources/profiles/Creality/filament/Generic ASA @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,175 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic ASA @Ender-5 Max-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "1cOFjktr0dBTbYS4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "70"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,240],[8.0,250],[12.0,260]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json
index 6f9ee6971e..f4b1fd74fb 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "JS8oDrWmlTmmZ9VJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "JS8oDrWmlTmmZ9VJ",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json
index d5850749d2..81854fca9b 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1 SE-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "XK0E9L6nEGz9410w",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1 SE-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "XK0E9L6nEGz9410w",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "55",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json
index 8894ee7af1..450ccb9a72 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "U4HDFaHTS7EtgCJj",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "U4HDFaHTS7EtgCJj",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "55",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1C-all.json
index 2669b08f43..3d8bdcc19e 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "Yya6SGcDEMvAKLYs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "Yya6SGcDEMvAKLYs",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json
index 0a5dc5d18a..46af0e1676 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "1nVS1yN0psDyFajd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "1nVS1yN0psDyFajd",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json
index 33cf5b2860..f94d0c06f5 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K1_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "62EZvOkMH6gWc6CU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K1_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "62EZvOkMH6gWc6CU",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json
index f1bdbc1310..d67a15b081 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K2 Plus-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "bPiPJ2MrgMOq01jX",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "5"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K2 Plus-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "bPiPJ2MrgMOq01jX",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json
index 346f7bfec6..6ed2f4deed 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K2 Pro-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "RScrAM7qssIS1RQC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.032",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K2 Pro-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "RScrAM7qssIS1RQC",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.032",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json
index 758d45606e..ef2fe096e9 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K2 SE-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "B3KqWjy2YfMDxjbS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K2 SE-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "B3KqWjy2YfMDxjbS",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Generic ASA @K2-all.json
index 68b9b71b9e..0b12417aa3 100644
--- a/resources/profiles/Creality/filament/Generic ASA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA @K2-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Generic ASA @K2-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "nmVYYCCRebt7sRKj",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "20"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFLPAxz3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA @K2-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "nmVYYCCRebt7sRKj",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"20"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json
index f98421ad49..c31060aa30 100644
--- a/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json	
@@ -1,148 +1,146 @@
 {
-    "type": "filament",
-    "name": "Generic ASA-CF @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "DnKtg4yCiafeDBIu",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_flow_ratio": [
-        "0.92"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_type": [
-        "ASA-CF"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF53eLVD"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic ASA-CF @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "DnKtg4yCiafeDBIu",
+	"filament_id": "OF53eLVD",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_flow_ratio": [
+		"0.92"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_type": [
+		"ASA-CF"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json b/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json
index 33ac63d296..3395945ad0 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json	
@@ -1,131 +1,129 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @Hi-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "5HO5PysrHUKqReVb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "150"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @Hi-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "5HO5PysrHUKqReVb",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"150"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json
index e0cfdb7090..62b0ea6edd 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json	
@@ -1,162 +1,160 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "rzpKPYQdPjzN3oVS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "7"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "rzpKPYQdPjzN3oVS",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"7"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json
index 9f2cbf4200..e1c3414cd5 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K1C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "sBNRrUUShVPgFlD2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "7"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K1C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "sBNRrUUShVPgFlD2",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"7"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json
index e79e575992..e068c8e767 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K1C_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "F35hv7Jv8sdPpHuG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "7"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K1C_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "F35hv7Jv8sdPpHuG",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"7"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json
index 9bd399cbf0..34418ac001 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K1_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "quzQIkhGomoTlGMy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "7"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K1_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "quzQIkhGomoTlGMy",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"7"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json
index c525c695d7..efbf6d921a 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "s7taqaFnDhBFXnJQ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "s7taqaFnDhBFXnJQ",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json
index 4d3492a70f..671072f839 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K2 Pro-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "WN4gUC7lL433UeUa",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "50"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "150"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K2 Pro-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "WN4gUC7lL433UeUa",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"150"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2-all.json
index 1f8bea7aef..bd5c265ca3 100644
--- a/resources/profiles/Creality/filament/Generic BVOH @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic BVOH @K2-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic BVOH @K2-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "appeb6xRpTFbyGsM",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "50"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "150"
-    ],
-    "filament_density": [
-        "1.138"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "BVOH"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "filament_adhesiveness_category": "797",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFo2UF2C"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic BVOH @K2-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "appeb6xRpTFbyGsM",
+	"filament_id": "OFo2UF2C",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"150"
+	],
+	"filament_density": [
+		"1.138"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"BVOH"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"filament_adhesiveness_category": "797",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json
index 9549195611..68517664f2 100644
--- a/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json	
@@ -1,173 +1,171 @@
 {
-    "type": "filament",
-    "name": "Generic HIPS @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_hips",
-    "from": "system",
-    "setting_id": "un4bn2cxbFdGO3DR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.05"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "HIPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFsFon5l"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic HIPS @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"setting_id": "un4bn2cxbFdGO3DR",
+	"filament_id": "OFsFon5l",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"HIPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json
index 5016c1e5a5..1b5d0ceaaf 100644
--- a/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic HIPS @K1C-all",
-    "inherits": "fdm_filament_hips",
-    "from": "system",
-    "setting_id": "e1wQQnbsFK0eOT76",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.05"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "HIPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFsFon5l"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic HIPS @K1C-all",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"setting_id": "e1wQQnbsFK0eOT76",
+	"filament_id": "OFsFon5l",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"HIPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json
index 33950552d8..21f3ff5869 100644
--- a/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic HIPS @K1C_CFS-C-all",
-    "inherits": "fdm_filament_hips",
-    "from": "system",
-    "setting_id": "5ZZon4W5GRf2ilKk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.05"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "HIPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFsFon5l"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic HIPS @K1C_CFS-C-all",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"setting_id": "5ZZon4W5GRf2ilKk",
+	"filament_id": "OFsFon5l",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"HIPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json
index 7b1ab3190b..20dac07db8 100644
--- a/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic HIPS @K1_CFS-C-all",
-    "inherits": "fdm_filament_hips",
-    "from": "system",
-    "setting_id": "81vAelQ8KbUPkNAL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.05"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "HIPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFsFon5l"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic HIPS @K1_CFS-C-all",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"setting_id": "81vAelQ8KbUPkNAL",
+	"filament_id": "OFsFon5l",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"HIPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json
index 255e9e8b6e..e24516c121 100644
--- a/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic HIPS @K2 Plus-all",
-    "inherits": "fdm_filament_hips",
-    "from": "system",
-    "setting_id": "eaR3AeSZnfqfAKaX",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.05"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "HIPS"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFsFon5l"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic HIPS @K2 Plus-all",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"setting_id": "eaR3AeSZnfqfAKaX",
+	"filament_id": "OFsFon5l",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"HIPS"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json
index 500722f1e9..ce836188d0 100644
--- a/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic PA @Ender-5Max-all;Creality Generic PA Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ChQOX6JlKujFwFcB",
 	"filament_id": "OFg8ndtj",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "0.9",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"PA"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json
index 12c3698ca6..2485bd9622 100644
--- a/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "kJAlbLyNyUBh772X",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "kJAlbLyNyUBh772X",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K1C-all.json b/resources/profiles/Creality/filament/Generic PA @K1C-all.json
index 310dfb7abd..95bc3ec40d 100644
--- a/resources/profiles/Creality/filament/Generic PA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K1C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "Y68qR47SYWUENSKm",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "Y68qR47SYWUENSKm",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json
index 0d134ae474..c398f7f3ac 100644
--- a/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "VtABl7yMx0yDOnz0",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "VtABl7yMx0yDOnz0",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json
index 1396769307..58121767fa 100644
--- a/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "ivl9C3evnuPMgB0F",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "ivl9C3evnuPMgB0F",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json
index 950b84e7f0..61984bcc11 100644
--- a/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json	
@@ -1,183 +1,181 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "E5tvF6Xpv7jZzLgm",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "70"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "E5tvF6Xpv7jZzLgm",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json
index c8ddd05024..7eb34e526c 100644
--- a/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json	
@@ -1,196 +1,194 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "0139pzgdlOAScB7g",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.058",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "0139pzgdlOAScB7g",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.058",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA @K2-all.json b/resources/profiles/Creality/filament/Generic PA @K2-all.json
index b98aac22a0..8993af315d 100644
--- a/resources/profiles/Creality/filament/Generic PA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA @K2-all.json	
@@ -1,196 +1,194 @@
 {
-    "type": "filament",
-    "name": "Generic PA @K2-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "gxCrQfCHpKO4p5IT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.12"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.058",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFg8ndtj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA @K2-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "gxCrQfCHpKO4p5IT",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.12"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.058",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json
index c047fb7774..7ec3b0c3e8 100644
--- a/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json	
@@ -1,152 +1,150 @@
 {
-    "type": "filament",
-    "name": "Generic PA-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "jEl76gFz2QQyvW6A",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "45"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQLcbps"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "jEl76gFz2QQyvW6A",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"45"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json
index 360ecbf35b..c4eeb50de9 100644
--- a/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PA-CF @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "eGoj7kJxL2NfqY5o",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "45"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFQLcbps"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA-CF @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "eGoj7kJxL2NfqY5o",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"45"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json
index 022474e6f1..ac5d2c00c8 100644
--- a/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PA-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "zbiMNXMvHACEqLfK",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "45"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQLcbps"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "zbiMNXMvHACEqLfK",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"45"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json
index 40586091b0..8e3ed28c4d 100644
--- a/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PA-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "DB1549abK4ZDVWG2",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "45"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "40"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.01",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQLcbps"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "DB1549abK4ZDVWG2",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"45"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.01",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json
index 0b0042c6c8..f8a9f12be6 100644
--- a/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json	
@@ -1,182 +1,180 @@
 {
-    "type": "filament",
-    "name": "Generic PA-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "aBR3ODfDoxJOLx8k",
-    "instantiation": "true",
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "45"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFQLcbps"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "aBR3ODfDoxJOLx8k",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"45"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json
index fb65088525..309c16cda1 100644
--- a/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json	
@@ -1,182 +1,180 @@
 {
-    "type": "filament",
-    "name": "Generic PA12-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "rZP36BUTvc68sHWI",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "120"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFM4iJlv"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA12-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "rZP36BUTvc68sHWI",
+	"filament_id": "OFM4iJlv",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"120"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json
index 04260f4d8e..23230df015 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json	
@@ -1,188 +1,186 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "QSCyT35VNEEMhvud",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "QSCyT35VNEEMhvud",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json
index b141bc04ec..0189d06e7b 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "fhFfYR7jZE4EbV0j",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "fhFfYR7jZE4EbV0j",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json
index 6dd6902397..905c209072 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "Go0O3gXzk3QyyBGk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "Go0O3gXzk3QyyBGk",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json
index 9c70b899f0..f0fc90ad44 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "dOmhoYus5mupLjle",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "dOmhoYus5mupLjle",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json
index 75cd58773a..dbfa45091c 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json	
@@ -1,191 +1,189 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "3UftFI9726wU6cBK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "3UftFI9726wU6cBK",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json
index 6388151090..91f79c1377 100644
--- a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "p6hDaLrNJvnvejQv",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA6-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFhTPf6L"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "p6hDaLrNJvnvejQv",
+	"filament_id": "OFhTPf6L",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json
index 5919945b58..927a1c8016 100644
--- a/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PA6-GF @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "Snwr9UFekvFcj8lx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_cooling_layer_time": [
-        "20"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "42"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_flow_ratio": [
-        "0.88"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retraction_length": [
-        "0.5"
-    ],
-    "filament_type": [
-        "PA-GF"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "290"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "60"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "2"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFh9u9c0"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA6-GF @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "Snwr9UFekvFcj8lx",
+	"filament_id": "OFh9u9c0",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"42"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_flow_ratio": [
+		"0.88"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_type": [
+		"PA-GF"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"290"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json
index d1decb74cc..f4e776ceae 100644
--- a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json	
@@ -1,182 +1,180 @@
 {
-    "type": "filament",
-    "name": "Generic PA612-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "Od0K6cY5fZtDAOOF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.17"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF8eaY7j"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA612-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "Od0K6cY5fZtDAOOF",
+	"filament_id": "OF8eaY7j",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.17"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json
index 5ccb21724d..972a0ccd17 100644
--- a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json	
@@ -1,184 +1,182 @@
 {
-    "type": "filament",
-    "name": "Generic PA612-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "YZr7lxLJZjL71WzO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.17"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF8eaY7j"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PA612-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "YZr7lxLJZjL71WzO",
+	"filament_id": "OF8eaY7j",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.17"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json
index 3e007d79c6..d8b314ffdb 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json	
@@ -1,197 +1,195 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "Q6f7jvJqw2gyNBFZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "Q6f7jvJqw2gyNBFZ",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json
index dcc9738515..559df69e3a 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json	
@@ -1,198 +1,196 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "Rt7TNUSJlBGzxbcN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "Rt7TNUSJlBGzxbcN",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json
index 2f5ae88e9d..7d1ea509cb 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json	
@@ -1,198 +1,196 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "CbUS1kiIgsHTZa28",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "CbUS1kiIgsHTZa28",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json
index e7ffe11efa..c42e41adf4 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json	
@@ -1,198 +1,196 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "71tO55hudcpbpReV",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "71tO55hudcpbpReV",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json
index 8d4157e8cd..05d9ace84a 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json	
@@ -1,197 +1,195 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "p3nXM3BSnsmS2XHO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "p3nXM3BSnsmS2XHO",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json
index a013abb416..d752fdf84d 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json	
@@ -1,184 +1,182 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "gwXDISorxlzhqE2L",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "gwXDISorxlzhqE2L",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json
index e8032a6b4c..4756391f64 100644
--- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json	
@@ -1,184 +1,182 @@
 {
-    "type": "filament",
-    "name": "Generic PAHT-CF @K2-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "OK8a49qQ1ooSpYKe",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFH7b12v"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PAHT-CF @K2-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "OK8a49qQ1ooSpYKe",
+	"filament_id": "OFH7b12v",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json
index 67c0d17aa6..65f146c1f4 100644
--- a/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "Dh2hSCE4xEmmv601",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "Dh2hSCE4xEmmv601",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K1C-all.json b/resources/profiles/Creality/filament/Generic PC @K1C-all.json
index 30bb957e88..fc13d05730 100644
--- a/resources/profiles/Creality/filament/Generic PC @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K1C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K1C-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "KWaWn7qw5WFhxP6u",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K1C-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "KWaWn7qw5WFhxP6u",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json
index 450b46b2af..19b0ebd6e6 100644
--- a/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "YXZbtzq7xTHm1L1k",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "YXZbtzq7xTHm1L1k",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json
index 353610592a..9788c706b6 100644
--- a/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K1_CFS-C-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "ZzPtJF9WrqfZa29N",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K1_CFS-C-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "ZzPtJF9WrqfZa29N",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json
index e4a1d358f7..5a489077b9 100644
--- a/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K2 Plus-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "3knMGS1s49r6Z9eL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K2 Plus-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "3knMGS1s49r6Z9eL",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"cool_plate_temp_initial_layer": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json
index 99c3232a10..d2e6e6bc9c 100644
--- a/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Generic PC @K2 Pro-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "CSAIxm75n407CqTG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "1.18"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFLakOUI"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PC @K2 Pro-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "CSAIxm75n407CqTG",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json
index c84c58a220..c83a904526 100644
--- a/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic PCTG @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "zmSP0G2uQvugDqZs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PCTG"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.13",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFu1evlr"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PCTG @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "zmSP0G2uQvugDqZs",
+	"filament_id": "OFu1evlr",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PCTG"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.13",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json
index 047bacd756..e50ac427e6 100644
--- a/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json	
@@ -1,188 +1,186 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "rbuxBWsJ43mXgEIi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "230"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "rbuxBWsJ43mXgEIi",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K1C-all.json b/resources/profiles/Creality/filament/Generic PET @K1C-all.json
index ae435635dd..c07ef2c0d9 100644
--- a/resources/profiles/Creality/filament/Generic PET @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K1C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K1C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "yblsYcRQlWMPyE2X",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "230"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K1C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "yblsYcRQlWMPyE2X",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json
index 93e9cd11f0..cb81e6743c 100644
--- a/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "Yhi1n5iQJpQPQQAp",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "230"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "Yhi1n5iQJpQPQQAp",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json
index 4e860053d9..0dca9e321e 100644
--- a/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K1_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "HrEHGzilsq8F3ne7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "230"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K1_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "HrEHGzilsq8F3ne7",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json
index cf56f3c9af..6ea61d280b 100644
--- a/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json	
@@ -1,192 +1,190 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K2 Plus-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "OFMSlAPXoITrhmPG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "95"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K2 Plus-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "OFMSlAPXoITrhmPG",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"95"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json
index 4da77efe33..8d19366d15 100644
--- a/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K2 Pro-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "fIxga8QpAboN7reJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "95"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.13",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K2 Pro-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "fIxga8QpAboN7reJ",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"95"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.13",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET @K2-all.json b/resources/profiles/Creality/filament/Generic PET @K2-all.json
index ef761807b0..13dbc77901 100644
--- a/resources/profiles/Creality/filament/Generic PET @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET @K2-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Generic PET @K2-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "K7DNfNNpWlGriQip",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "95"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF6MOPWx"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET @K2-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "K7DNfNNpWlGriQip",
+	"filament_id": "OF6MOPWx",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"95"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json
index 4c9fadfbc6..55792e2c7d 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "iAykK8PMYs9LdxrP",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "iAykK8PMYs9LdxrP",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json
index e98f8773a6..e8a239cf78 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json	
@@ -1,177 +1,175 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K1C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "WhGF57kMBW9hM9zv",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K1C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "WhGF57kMBW9hM9zv",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json
index 36c9dc92a6..87742e819e 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json	
@@ -1,177 +1,175 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "IiR1UEHx5RrOeAWM",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "IiR1UEHx5RrOeAWM",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json
index c1955e0667..db7b7602d8 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json	
@@ -1,177 +1,175 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "2a9xvwlw1X0qsA26",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "2a9xvwlw1X0qsA26",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json
index 44eb974cdf..d35cb1556c 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json	
@@ -1,195 +1,193 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "srmb3jsHHpFDnfsp",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.034",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "srmb3jsHHpFDnfsp",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.034",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json
index ddfb603d30..30a47753d0 100644
--- a/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Generic PET-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "5tjKAfZmtCNClyrd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "290"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
-    "nozzle_temperature_range_high": [
-        "300"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "40",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFQdaVZS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PET-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "5tjKAfZmtCNClyrd",
+	"filament_id": "OFQdaVZS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "40",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json
index df6509395f..e9a463bd1a 100644
--- a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic PETG @Ender-5Max-all;Creality Generic PETG Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "TFS4Fi1PuE7WgnPr",
 	"filament_id": "OFYPdQJh",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "0.85",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json
index cbdc915a23..072a4e3f7e 100644
--- a/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @Ender-3 V4-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "P9ZP95oPCCBeXhGC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "16"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @Ender-3 V4-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "P9ZP95oPCCBeXhGC",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic PETG @Ender-5 Max-all.json
deleted file mode 100644
index 229ac91f2b..0000000000
--- a/resources/profiles/Creality/filament/Generic PETG @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "yNgF407ERXuU7LHE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,230],[1.0,240]]",
-    "pressure_advance": "0.064",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic PETG @Hi-all.json b/resources/profiles/Creality/filament/Generic PETG @Hi-all.json
index 32b171416b..a36395f952 100644
--- a/resources/profiles/Creality/filament/Generic PETG @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @Hi-all.json	
@@ -1,151 +1,149 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @Hi-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "1N9muT0ILCJ7pdQq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]",
-    "pressure_advance": "0.078",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @Hi-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "1N9muT0ILCJ7pdQq",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]",
+	"pressure_advance": "0.078",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json
index 40fecf5d33..1666762dad 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "j2R2SrPu6U5fde21",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "j2R2SrPu6U5fde21",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json
index e82036ef1c..c1d8612475 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "ktn07NL2acbf4FzZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]",
-    "pressure_advance": "0.086",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "ktn07NL2acbf4FzZ",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]",
+	"pressure_advance": "0.086",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json
index 649d2057b3..917188d870 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "8isRtWlMhY6f6OTg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]",
-    "pressure_advance": "0.086",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "8isRtWlMhY6f6OTg",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]",
+	"pressure_advance": "0.086",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1C-all.json
index 5d05e2a977..2e368f0e59 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "983sxUds4Bih3OCl",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "983sxUds4Bih3OCl",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json
index 7f7459382a..a614803613 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1C_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "rMTi8mSKdtnzsMbr",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1C_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "rMTi8mSKdtnzsMbr",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json
index 568b5a1cf5..6c81dc803e 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K1_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "9Ay01Nq2Dv2SfQVR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K1_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "9Ay01Nq2Dv2SfQVR",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,235], [1.3,250]]",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json
index 6b10eac4c6..4704b0e89c 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json	
@@ -1,142 +1,140 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K2 Plus-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "z4vClzn8RViHNLgk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K2 Plus-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "z4vClzn8RViHNLgk",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json
index 5d007dfff3..d819485f07 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K2 Pro-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "huEA8Ry63opxcD4n",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K2 Pro-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "huEA8Ry63opxcD4n",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json
index 69af8255c5..1de0675bdb 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json	
@@ -1,152 +1,150 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K2 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "awADayXExBihbXgS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K2 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "awADayXExBihbXgS",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Generic PETG @K2-all.json
index a8e2308613..3d1e74f03b 100644
--- a/resources/profiles/Creality/filament/Generic PETG @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @K2-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @K2-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "7iDx59I7g14YDF8w",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "95"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "16"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,250]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @K2-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "7iDx59I7g14YDF8w",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"95"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,250]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json
index 301fc96ef9..a7c58188b0 100644
--- a/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic PETG @SPARKX i7-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "5jgqjcjpqHPzxm6H",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.96"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,240],[1.2,250]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OFYPdQJh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG @SPARKX i7-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "5jgqjcjpqHPzxm6H",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"14"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,240],[1.2,250]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json
index 5f03c5b211..38eea406a6 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "4aNmHiMKdF9f0qdK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "4aNmHiMKdF9f0qdK",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json
index 4044297ea9..43d2d6d056 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K1C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "J9U6OONEnIpwmjf1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K1C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "J9U6OONEnIpwmjf1",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json
index 5c22d3e902..055dc6c674 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "WaKz2m5F97gq2Lm2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "WaKz2m5F97gq2Lm2",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json
index 00f8180634..8c516d09b8 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "37j0QrLekeU2z2q6",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "37j0QrLekeU2z2q6",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json
index 5ed6aa15ea..eb1bb1e4eb 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K2 Plus-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "OEzFehmwiMscMC7x",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K2 Plus-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "OEzFehmwiMscMC7x",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json
index a801d09c9b..6c85e2d3e4 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K2 Pro-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "XNo4wgLuyPeOqInw",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_flow_ratio": [
-        "0.94"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K2 Pro-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "XNo4wgLuyPeOqInw",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json
index a2b844f80f..72452d8af0 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @K2-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "LrzCY2ZsMGzQ9hZW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @K2-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "LrzCY2ZsMGzQ9hZW",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json
index 954782024a..5dd48f17a3 100644
--- a/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-CF @SPARKX i7-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "0UI0C81wu0FTlutg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "90"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
-    "pressure_advance": "0.024",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFoYSJKi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-CF @SPARKX i7-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "0UI0C81wu0FTlutg",
+	"filament_id": "OFoYSJKi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"90"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
+	"pressure_advance": "0.024",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json
index 63dead723c..de7c1c7cbe 100644
--- a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json	
@@ -1,152 +1,150 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-GF @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "Bn3MV8VSTFbpxsJK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "90"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "17"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "0.5"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFyLWVF3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-GF @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "Bn3MV8VSTFbpxsJK",
+	"filament_id": "OFyLWVF3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"17"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json
index 5405f7dbcd..fc176da918 100644
--- a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-GF @K2 Pro-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "Q5qYSWKf0YGbomey",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "17"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFyLWVF3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-GF @K2 Pro-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "Q5qYSWKf0YGbomey",
+	"filament_id": "OFyLWVF3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"17"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json
index 7d52685214..8a5ffa2ac2 100644
--- a/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Generic PETG-GF @K2-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "mirtPgYBmAcUOLCg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "17"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFyLWVF3"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PETG-GF @K2-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "mirtPgYBmAcUOLCg",
+	"filament_id": "OFyLWVF3",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"17"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json
index ff55c41e81..f4714b8acc 100644
--- a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic PLA @Ender-5Max-all;Creality Generic PLA Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "xGTd14Qwc0JbI6kg",
 	"filament_id": "OFDSrzZ8",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "0.9",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json
index 452c7854ae..9bdc93548b 100644
--- a/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Creality Hi-all",
-	"inherits": "Generic PLA @Creality",
 	"renamed_from": "Creality Generic PLA @Hi-all;Creality Generic PLA Hi-all",
+	"inherits": "Generic PLA @Creality",
 	"from": "system",
 	"setting_id": "6rwK4GqvNrgaw4kF",
 	"instantiation": "true",
@@ -45,9 +45,6 @@
 	"filament_cooling_moves": [
 		"4"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -57,9 +54,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json
index ce8231d11a..112c869ae8 100644
--- a/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "prD5vMrpYGccWzdn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "prD5vMrpYGccWzdn",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic PLA @Ender-5 Max-all.json
deleted file mode 100644
index 54783f5efc..0000000000
--- a/resources/profiles/Creality/filament/Generic PLA @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,161 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ubfcxetXGj6agAoi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],[1.0,210]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic PLA @Hi-all.json b/resources/profiles/Creality/filament/Generic PLA @Hi-all.json
index 43bb0786ea..25ca83f1c6 100644
--- a/resources/profiles/Creality/filament/Generic PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @Hi-all.json	
@@ -1,142 +1,140 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "eza77EPrdoTvZdw7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.8 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "eza77EPrdoTvZdw7",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json
index 315347fc4f..291aca3b0d 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ARsPmEmVZlsfqy4L",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "45"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "45"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ARsPmEmVZlsfqy4L",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"45"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json
index 11bd5fd68a..4b4e3e0125 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ZzKNiMtyn93fR8Hq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ZzKNiMtyn93fR8Hq",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json
index 167ef73d00..60212b6a51 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json	
@@ -1,141 +1,139 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "grHcTUEdjD6jxza1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "grHcTUEdjD6jxza1",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1C-all.json
index 7cad23ed0e..d242a5b389 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "qSoHwF6RKEDk9oy0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "45"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "45"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qSoHwF6RKEDk9oy0",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"45"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json
index 50db3c5fb5..80affeffc9 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "5oIZY7x0t6ORAd5y",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "45"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "45"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "5oIZY7x0t6ORAd5y",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"45"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json
index ddbc57ab8d..ab014109f1 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "LVSGrfS4cac3vRgQ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "45"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "45"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "LVSGrfS4cac3vRgQ",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"45"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json
index 6514b99d50..530e929d3a 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zgZhX3yZ3m9HZ8AF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "6"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zgZhX3yZ3m9HZ8AF",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json
index 96eafd022b..a4d6fb7509 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "umMGfkURWkPH7wY2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "umMGfkURWkPH7wY2",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json
index f8e0beaefe..a229efd77e 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "03mMqzkFvH7rS8wz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "03mMqzkFvH7rS8wz",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Generic PLA @K2-all.json
index ee71e52517..ab794d1dec 100644
--- a/resources/profiles/Creality/filament/Generic PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @K2-all.json	
@@ -1,162 +1,160 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "WD6bTDOOwBE72RaU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],[1.2,190],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "WD6bTDOOwBE72RaU",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],[1.2,190],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json
index 07d9aa02e0..bfa143866e 100644
--- a/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "09RAKy1b3XyRqJlV",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.2,210],[0.6,220]]",
-    "pressure_advance": "0.12",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.2 nozzle",
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OFDSrzZ8"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "09RAKy1b3XyRqJlV",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		"; Filament gcode\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.2,210],[0.6,220]]",
+	"pressure_advance": "0.12",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.2 nozzle",
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json
index 3fd2827231..92e04c7694 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "9EtBYoxLtP3BuplP",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.028",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "9EtBYoxLtP3BuplP",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.028",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Ender-5 Max-all.json
deleted file mode 100644
index ed024bf161..0000000000
--- a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,161 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA-CF @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "AHrCSGRui6sRCmQx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json
index 698bdc2927..1cddecd143 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "gMlu34zMrx0IX0GY",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "gMlu34zMrx0IX0GY",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json
index 57228d8b7f..74e0bd293d 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "kCiZBqAiO5Jc8RgA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "kCiZBqAiO5Jc8RgA",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json
index 647819f8ea..0757355a82 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "dCS3zA3Z3QmsUMav",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "60"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "dCS3zA3Z3QmsUMav",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json
index ae3aa14a7a..062866dce8 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "6p7VGPRhpUjCVmrs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "6p7VGPRhpUjCVmrs",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json
index 7c1b681b1e..0c4ef3d146 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "eL5STunwFpRYoNwx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "eL5STunwFpRYoNwx",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json
index ab73ebe1ba..088a22bf9c 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "RGCRo5t8SRI85Oyz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "RGCRo5t8SRI85Oyz",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json
index 381f25f899..f6adbdd926 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "nZoZ1KL4YYwCdBYo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nZoZ1KL4YYwCdBYo",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json
index f1ce0ce42d..c9a217569f 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "eXbFz3H9NBjDv3fy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "eXbFz3H9NBjDv3fy",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json
index 4dab8f0c8a..f0da0a4507 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "4PnBWB1vn3jXYDcV",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4PnBWB1vn3jXYDcV",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json
index 111ac7470a..e234a96124 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Vp7iPE7R08sUpbNM",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Vp7iPE7R08sUpbNM",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json
index 4184a05737..3f01d3a846 100644
--- a/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json	
@@ -1,183 +1,181 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-CF @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "KnXh5yN3mZ1zFs7t",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210][1.2,230]]",
-    "pressure_advance": "0.023",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFWbdGsC"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-CF @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "KnXh5yN3mZ1zFs7t",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210][1.2,230]]",
+	"pressure_advance": "0.023",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json
index da5c1ba172..b1f9ee266f 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json	
@@ -1,147 +1,145 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "4oKiaxCpzOVuq7JT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "16"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.068",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4oKiaxCpzOVuq7JT",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.068",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-5 Max-all.json
deleted file mode 100644
index 250c387982..0000000000
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,155 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA-Silk @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zIrKl9P6Aer6sbiS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],[1.0,220]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json
index a3dfac28d1..c793b2490e 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "yiXBAJwZHe0yW8MN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
-    "pressure_advance": "0.026",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "yiXBAJwZHe0yW8MN",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
+	"pressure_advance": "0.026",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json
index c7ce2639ae..e0a29c56c5 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "a8WrKJxnm4xNe1HK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "a8WrKJxnm4xNe1HK",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json
index 418248ed71..4f67885551 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "inmumMkeEas0Maw3",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "inmumMkeEas0Maw3",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json
index 1ba33bf6dc..8f6c7fdadc 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "WaWMHS0yaaoiG98Q",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "WaWMHS0yaaoiG98Q",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json
index f37ef16d31..9d1700be22 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GpGBUE0LBkVKGtO1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GpGBUE0LBkVKGtO1",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json
index 1b4298f035..2b2d9151a3 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "cZIEiMZQbIcvP57r",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "cZIEiMZQbIcvP57r",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json
index f81638a23f..2fe542ff60 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "jJ8kRNXq2iz98qTh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "jJ8kRNXq2iz98qTh",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,205],  [1.1,205],  [1.4,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json
index 50f7dac4eb..406d0e71d7 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "8DTZKlZEArr9Exd7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "8DTZKlZEArr9Exd7",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json
index 2c18b858e8..3c7d1e7373 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "hzbRwh2RichDUBMU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "hzbRwh2RichDUBMU",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json
index 8b7030ff73..bbd1c2802e 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json	
@@ -1,137 +1,135 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GdPDY6XouAmn2Sw4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GdPDY6XouAmn2Sw4",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json
index 5826a18ba9..3806eba238 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json	
@@ -1,162 +1,160 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "VhDF33Mt4h0SUIZH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "95"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "VhDF33Mt4h0SUIZH",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"95"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json
index e67d570ad4..730f709814 100644
--- a/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Generic PLA-Silk @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "veZcyFoa3uiS0oel",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.3,215],[1.6,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFi6PfUM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PLA-Silk @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "veZcyFoa3uiS0oel",
+	"filament_id": "OFi6PfUM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.3,215],[1.6,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json
index 7aec44400e..91c5497f52 100644
--- a/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "SpL486LVpIbISfQj",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "SpL486LVpIbISfQj",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K1C-all.json b/resources/profiles/Creality/filament/Generic PP @K1C-all.json
index ad01f49d51..a417e0d801 100644
--- a/resources/profiles/Creality/filament/Generic PP @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K1C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K1C-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "iY30mqnBJOeybNin",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K1C-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "iY30mqnBJOeybNin",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json
index fb56912bf1..e4d01f17b1 100644
--- a/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "27bAcMgt0jDcUvLF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "27bAcMgt0jDcUvLF",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json
index 88acdf3d32..bc2e1342f4 100644
--- a/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K1_CFS-C-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "8c9klBh6C7O76Lgc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K1_CFS-C-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "8c9klBh6C7O76Lgc",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json
index e34d70a902..9c04230e2a 100644
--- a/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K2 Plus-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "sevgawCx7xvOFLXm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K2 Plus-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "sevgawCx7xvOFLXm",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json
index e3167109d8..df4168d24e 100644
--- a/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json	
@@ -1,142 +1,140 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K2 Pro-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "bAxYHHsv8COKiIFG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "hot_plate_temp": [
-        "45"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "255"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "45",
-    "customized_plate_temp_initial_layer": "45",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "35",
-    "epoxy_resin_plate_temp_initial_layer": "35",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K2 Pro-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "bAxYHHsv8COKiIFG",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"hot_plate_temp": [
+		"45"
+	],
+	"hot_plate_temp_initial_layer": [
+		"45"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"45"
+	],
+	"textured_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "45",
+	"customized_plate_temp_initial_layer": "45",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "35",
+	"epoxy_resin_plate_temp_initial_layer": "35",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP @K2-all.json b/resources/profiles/Creality/filament/Generic PP @K2-all.json
index 8f0075422c..5b033c2bb7 100644
--- a/resources/profiles/Creality/filament/Generic PP @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP @K2-all.json	
@@ -1,142 +1,140 @@
 {
-    "type": "filament",
-    "name": "Generic PP @K2-all",
-    "inherits": "fdm_filament_pp",
-    "from": "system",
-    "setting_id": "dMhTxpF3ipepME4p",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "40"
-    ],
-    "filament_density": [
-        "0.91"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PP"
-    ],
-    "hot_plate_temp": [
-        "45"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "255"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "45",
-    "customized_plate_temp_initial_layer": "45",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "35",
-    "epoxy_resin_plate_temp_initial_layer": "35",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.08",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF1UNk9P"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP @K2-all",
+	"inherits": "fdm_filament_pp",
+	"from": "system",
+	"setting_id": "dMhTxpF3ipepME4p",
+	"filament_id": "OF1UNk9P",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"40"
+	],
+	"filament_density": [
+		"0.91"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PP"
+	],
+	"hot_plate_temp": [
+		"45"
+	],
+	"hot_plate_temp_initial_layer": [
+		"45"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"45"
+	],
+	"textured_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "45",
+	"customized_plate_temp_initial_layer": "45",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "35",
+	"epoxy_resin_plate_temp_initial_layer": "35",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.08",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json
index e557ac36e4..53df078b03 100644
--- a/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic PP-CF @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "lHJWTFXiSKzWrX1A",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "23"
-    ],
-    "filament_density": [
-        "1.01"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PP-CF"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFXkm8q1"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PP-CF @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "lHJWTFXiSKzWrX1A",
+	"filament_id": "OFXkm8q1",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.01"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PP-CF"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json
index 01f7c52bc9..68a2c3a2d9 100644
--- a/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json	
@@ -1,173 +1,171 @@
 {
-    "type": "filament",
-    "name": "Generic PPS @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "OCjDOWQ5tgZgZB0R",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.38"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "320"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "320"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "320"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFq9svOz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "OCjDOWQ5tgZgZB0R",
+	"filament_id": "OFq9svOz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"320"
+	],
+	"nozzle_temperature_initial_layer": [
+		"320"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"320"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS @K1C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1C-all.json
index 39a3449351..e29921dab2 100644
--- a/resources/profiles/Creality/filament/Generic PPS @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS @K1C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS @K1C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "9HAL1MdIgM7fyklo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.38"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "320"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "320"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "320"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFq9svOz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS @K1C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "9HAL1MdIgM7fyklo",
+	"filament_id": "OFq9svOz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"320"
+	],
+	"nozzle_temperature_initial_layer": [
+		"320"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"320"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json
index af12995572..440948c387 100644
--- a/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "DVtMTnkEsr8o5Vzh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.38"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "320"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "320"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "320"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFq9svOz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "DVtMTnkEsr8o5Vzh",
+	"filament_id": "OFq9svOz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"320"
+	],
+	"nozzle_temperature_initial_layer": [
+		"320"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"320"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json
index dd22fcf107..6b2cd34fc7 100644
--- a/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS @K1_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "2HTODPgc4aIZ3XG8",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.38"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "320"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "320"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "320"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFq9svOz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS @K1_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "2HTODPgc4aIZ3XG8",
+	"filament_id": "OFq9svOz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"320"
+	],
+	"nozzle_temperature_initial_layer": [
+		"320"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"320"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json
index deff12cad5..a48497fb88 100644
--- a/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json	
@@ -1,151 +1,149 @@
 {
-    "type": "filament",
-    "name": "Generic PPS @K2 Plus-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "nGEhRfiizC0emg2M",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.38"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "310"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "310"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFq9svOz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS @K2 Plus-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "nGEhRfiizC0emg2M",
+	"filament_id": "OFq9svOz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"310"
+	],
+	"nozzle_temperature_initial_layer": [
+		"310"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json
index f07eed6f9a..c845f5cc04 100644
--- a/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json	
@@ -1,173 +1,171 @@
 {
-    "type": "filament",
-    "name": "Generic PPS-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "Lo64lIBBBOVC7X0f",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "130"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "305"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "305"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "305"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6rdQ6M"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "Lo64lIBBBOVC7X0f",
+	"filament_id": "OF6rdQ6M",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"130"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"305"
+	],
+	"nozzle_temperature_initial_layer": [
+		"305"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"305"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json
index 78f5a33e87..69ea7be859 100644
--- a/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS-CF @K1C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "IGMvRXBFMXKpLJmO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "130"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "305"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "305"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "305"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF6rdQ6M"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS-CF @K1C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "IGMvRXBFMXKpLJmO",
+	"filament_id": "OF6rdQ6M",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"130"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"305"
+	],
+	"nozzle_temperature_initial_layer": [
+		"305"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"305"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json
index 8975f9792c..dc0e63e0b1 100644
--- a/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "TaXzrJiCydy8MS3f",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "130"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "305"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "305"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "305"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6rdQ6M"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "TaXzrJiCydy8MS3f",
+	"filament_id": "OF6rdQ6M",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"130"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"305"
+	],
+	"nozzle_temperature_initial_layer": [
+		"305"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"305"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json
index 11b1b3a155..4d4d30a0a7 100644
--- a/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic PPS-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "KqN1ZnjnbBaLjVK5",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "130"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_flow_ratio": [
-        "0.926"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PPS-CF"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "305"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "305"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "305"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "3"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF6rdQ6M"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "KqN1ZnjnbBaLjVK5",
+	"filament_id": "OF6rdQ6M",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"130"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_type": [
+		"PPS-CF"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"305"
+	],
+	"nozzle_temperature_initial_layer": [
+		"305"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"305"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json
index 3bbcf8f992..e45f769de2 100644
--- a/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json	
@@ -1,144 +1,142 @@
 {
-    "type": "filament",
-    "name": "Generic PPS-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pps",
-    "from": "system",
-    "setting_id": "tIoEmhVZ47jiEg2Q",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "105"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "130"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PPS-CF"
-    ],
-    "hot_plate_temp": [
-        "105"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "105"
-    ],
-    "nozzle_temperature": [
-        "310"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "310"
-    ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
-    "nozzle_temperature_range_low": [
-        "300"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "105"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "105"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.058",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF6rdQ6M"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PPS-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pps",
+	"from": "system",
+	"setting_id": "tIoEmhVZ47jiEg2Q",
+	"filament_id": "OF6rdQ6M",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"105"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"130"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PPS-CF"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"nozzle_temperature": [
+		"310"
+	],
+	"nozzle_temperature_initial_layer": [
+		"310"
+	],
+	"nozzle_temperature_range_high": [
+		"350"
+	],
+	"nozzle_temperature_range_low": [
+		"300"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"105"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.058",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @Hi-all.json b/resources/profiles/Creality/filament/Generic PVA @Hi-all.json
index 6fdad0ad0b..ff30a27f95 100644
--- a/resources/profiles/Creality/filament/Generic PVA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @Hi-all.json	
@@ -1,136 +1,134 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @Hi-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "M3oK19GPHF4pXnE1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @Hi-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "M3oK19GPHF4pXnE1",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json
index ba02942df2..a2bb83f510 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json	
@@ -1,128 +1,126 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "GVvpekUbUn6UPw2h",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "GVvpekUbUn6UPw2h",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K1C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1C-all.json
index 34d0a7231d..2f949f1e05 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K1C-all.json	
@@ -1,129 +1,127 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K1C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "DnCH1X6KBNi1m0LO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K1C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "DnCH1X6KBNi1m0LO",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json
index 607cf3b0dd..6e9b038448 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json	
@@ -1,129 +1,127 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "16V0liTfFopXs9hz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "16V0liTfFopXs9hz",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json
index e5eff7fb64..b698258f50 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json	
@@ -1,129 +1,127 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K1_CFS-C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "tomLVSBIaoZzTLo0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K1_CFS-C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "tomLVSBIaoZzTLo0",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json
index a4499aa85d..c34bf5aa64 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "rCyivt0j7lJ11Obc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "rCyivt0j7lJ11Obc",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json
index 9cf5bfd6bc..c6c4771162 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K2 Pro-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "Q3FPysmnAH6EI5QJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "50"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K2 Pro-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "Q3FPysmnAH6EI5QJ",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic PVA @K2-all.json b/resources/profiles/Creality/filament/Generic PVA @K2-all.json
index d69eab7457..246340a80c 100644
--- a/resources/profiles/Creality/filament/Generic PVA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic PVA @K2-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Generic PVA @K2-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "8ZOmE6qGjxxL8H0b",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "50"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "80"
-    ],
-    "filament_density": [
-        "1.37"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_soluble": [
-        "1"
-    ],
-    "filament_type": [
-        "PVA"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "225"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFDvXujf"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic PVA @K2-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "8ZOmE6qGjxxL8H0b",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.37"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_soluble": [
+		"1"
+	],
+	"filament_type": [
+		"PVA"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json
index a59be37173..f862a9cefd 100644
--- a/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "Generic Support for PA @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "jqyOG2srSFDU3HCN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "38"
-    ],
-    "filament_density": [
-        "1.17"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "0%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.034",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFDtop41"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic Support for PA @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "jqyOG2srSFDU3HCN",
+	"filament_id": "OFDtop41",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"38"
+	],
+	"filament_density": [
+		"1.17"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.034",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json
index 5135c5ee68..e70cab2e96 100644
--- a/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json	
@@ -1,162 +1,160 @@
 {
-    "type": "filament",
-    "name": "Generic Support for PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "W6AEYBcheMyorkN1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "60"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "36"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFin64Qg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic Support for PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "W6AEYBcheMyorkN1",
+	"filament_id": "OFin64Qg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"36"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json
index da1860ce3c..8351d1d3db 100644
--- a/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Generic TPU 64D @K2 Plus-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "0qV6lVuaNDT3U2HK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "0"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFF3cuzT"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU 64D @K2 Plus-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "0qV6lVuaNDT3U2HK",
+	"filament_id": "OFF3cuzT",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json
index 54d1fd6680..2cbfbc8335 100644
--- a/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json	
@@ -1,185 +1,183 @@
 {
-    "type": "filament",
-    "name": "Generic TPU 64D @SPARKX i7-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "MCElfOpYpjeuwZju",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "40"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "0"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "215"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.28",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFF3cuzT"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU 64D @SPARKX i7-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "MCElfOpYpjeuwZju",
+	"filament_id": "OFF3cuzT",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"40"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.28",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json
index 62f4916a99..c90e9ddcd4 100644
--- a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic TPU @Creality Ender-5Max-all",
-	"inherits": "fdm_filament_common",
 	"renamed_from": "Creality Generic TPU @Ender-5Max-all;Creality Generic TPU Ender-5Max-all",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "XqW2iYrRTVlXuCwD",
 	"filament_id": "OFgbpcy9",
@@ -44,7 +44,6 @@
 	],
 	"filament_flow_ratio": "1",
 	"filament_is_support": "0",
-	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
 	"filament_max_volumetric_speed": [
@@ -74,7 +73,6 @@
 	"filament_type": [
 		"TPU"
 	],
-	"filament_unload_time": "0",
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"filament_vendor": [
diff --git a/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json
index 18e8caacda..6daccee813 100644
--- a/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @Ender-3 V4-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "iJozGH7KvOHz8smj",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.96"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "1.6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.46",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @Ender-3 V4-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "iJozGH7KvOHz8smj",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"1.6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.46",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Generic TPU @Ender-5 Max-all.json
deleted file mode 100644
index 940f0bdb03..0000000000
--- a/resources/profiles/Creality/filament/Generic TPU @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,166 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic TPU @Ender-5 Max-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "KPUcdZyegXYeyHOL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json
index 0e093087d3..a1bc6f0e61 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "h9xCBpYO0jR5I5PG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "h9xCBpYO0jR5I5PG",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json
index 12f548e797..b8083ab997 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1 SE-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "euSJIgcrA95IBrYT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.8",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1 SE-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "euSJIgcrA95IBrYT",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.8",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json
index c7aa82e060..d3bf797574 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "nHZN4EVW9T6dcG2v",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.8",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "nHZN4EVW9T6dcG2v",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.8",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1C-all.json
index 4d77ed28a7..36e01b8138 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1C-all.json	
@@ -1,151 +1,149 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "170MDhVcDn1dM9eK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "170MDhVcDn1dM9eK",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json
index 4c29062659..a62959b7e3 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json	
@@ -1,151 +1,149 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1C_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "XyaRiGJD4khUkwUe",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1C_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "XyaRiGJD4khUkwUe",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json
index 88523dd930..2b0def8d3f 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json	
@@ -1,151 +1,149 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K1_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "5e2FELlHtgaCc0K3",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "0"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "0"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "0"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Normal Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K1_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "5e2FELlHtgaCc0K3",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json
index a06cdec298..b1b97a4e9a 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K2 Plus-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "kcwtAbqZkxRwtCE3",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.3",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K2 Plus-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "kcwtAbqZkxRwtCE3",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.3",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json
index 07e97acb84..f30cb1b863 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K2 Pro-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "AZzxNf1i5qruVcBL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.3",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K2 Pro-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "AZzxNf1i5qruVcBL",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.3",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json
index 8793fc167e..237974d0ae 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K2 SE-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "pjhl2ytSAdJgb8tc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K2 SE-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "pjhl2ytSAdJgb8tc",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Generic TPU @K2-all.json
index 03d44388f5..5b72422498 100644
--- a/resources/profiles/Creality/filament/Generic TPU @K2-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @K2-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @K2-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "sjSoPLBLcYw8AJKV",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.3",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @K2-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "sjSoPLBLcYw8AJKV",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.3",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json
index c1d0268024..9bcc5709be 100644
--- a/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json	
@@ -1,172 +1,170 @@
 {
-    "type": "filament",
-    "name": "Generic TPU @SPARKX i7-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "v6uEvu5qbKX9kE7T",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "40"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "1.8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFgbpcy9"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Generic TPU @SPARKX i7-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "v6uEvu5qbKX9kE7T",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"40"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"1.8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json
index e300daac38..c6e0cee888 100644
--- a/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "HP Ultra PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "mNVwdo8Tu3M8MAMQ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCJpR7a"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP Ultra PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "mNVwdo8Tu3M8MAMQ",
+	"filament_id": "OFCJpR7a",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json
index d437c91d60..a960581182 100644
--- a/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "HP Ultra PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "7mN3GsHHQb2sziH9",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFCJpR7a"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP Ultra PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "7mN3GsHHQb2sziH9",
+	"filament_id": "OFCJpR7a",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json
index 2c354d95bc..933b225962 100644
--- a/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "HP Ultra PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "xYIC2SFJ9IeGcVuC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCJpR7a"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP Ultra PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "xYIC2SFJ9IeGcVuC",
+	"filament_id": "OFCJpR7a",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json
index db920a7f56..326ae95b43 100644
--- a/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json	
@@ -1,160 +1,158 @@
 {
-    "type": "filament",
-    "name": "HP Ultra PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "HfPCXm8gwCtZnkjJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCJpR7a"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP Ultra PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HfPCXm8gwCtZnkjJ",
+	"filament_id": "OFCJpR7a",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json
index 8f912cf729..fb92b41577 100644
--- a/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "HP Ultra PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "yHu1ZjX5BoH8dw5z",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFCJpR7a"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP Ultra PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "yHu1ZjX5BoH8dw5z",
+	"filament_id": "OFCJpR7a",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @Ender-5 Max-all.json b/resources/profiles/Creality/filament/HP-ASA @Ender-5 Max-all.json
deleted file mode 100644
index b2d283fae0..0000000000
--- a/resources/profiles/Creality/filament/HP-ASA @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,175 +0,0 @@
-{
-    "type": "filament",
-    "name": "HP-ASA @Ender-5 Max-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "JzsojF2Um23vm2qT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.88"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,240],[8.0,250],[12.0,260]]",
-    "pressure_advance": "0.032",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json
index 16810d1886..92f0630114 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "RInV2wT54da08tvW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "100",
-    "epoxy_resin_plate_temp_initial_layer": "100",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.046",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "RInV2wT54da08tvW",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "100",
+	"epoxy_resin_plate_temp_initial_layer": "100",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.046",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K1C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1C-all.json
index c720b4d1b0..abf38f523a 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K1C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K1C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "Iw7dIqafCnOnBgDE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "100",
-    "epoxy_resin_plate_temp_initial_layer": "100",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.046",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K1C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "Iw7dIqafCnOnBgDE",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "100",
+	"epoxy_resin_plate_temp_initial_layer": "100",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.046",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json
index 01a49e2392..bb6bc6e1bd 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "A5zG0GNhQnOlhTOU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "100",
-    "epoxy_resin_plate_temp_initial_layer": "100",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.046",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "A5zG0GNhQnOlhTOU",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "100",
+	"epoxy_resin_plate_temp_initial_layer": "100",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.046",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json
index d3a45386ad..50c39a8f96 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K1_CFS-C-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "umNqcyYhx49DC2Ki",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "100",
-    "epoxy_resin_plate_temp_initial_layer": "100",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.046",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K1_CFS-C-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "umNqcyYhx49DC2Ki",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "100",
+	"epoxy_resin_plate_temp_initial_layer": "100",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.046",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json
index 1b97d61b93..6aadd53bf2 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K2 Plus-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "cH8oKyQX9jde7Bf8",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K2 Plus-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "cH8oKyQX9jde7Bf8",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json
index 33a4406fdd..e4c917d083 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K2 Pro-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "HxNkP2GYbTD7yrUZ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K2 Pro-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "HxNkP2GYbTD7yrUZ",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json
index f29ffdd702..3ef8e7467e 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K2 SE-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "TbIud8JJSMQ0nYz0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K2 SE-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "TbIud8JJSMQ0nYz0",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-ASA @K2-all.json b/resources/profiles/Creality/filament/HP-ASA @K2-all.json
index 2d38575630..da6c53d8a3 100644
--- a/resources/profiles/Creality/filament/HP-ASA @K2-all.json	
+++ b/resources/profiles/Creality/filament/HP-ASA @K2-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "HP-ASA @K2-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "j9EXhFUKSE3c2awm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "20"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFPHLnoe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-ASA @K2-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "j9EXhFUKSE3c2awm",
+	"filament_id": "OFPHLnoe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"20"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json b/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json
index 9d7767c4d8..87a84f8781 100644
--- a/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @Ender-3 V4-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "x7fQ7w2dCpvVfOLw",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "28"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.96"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.36",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @Ender-3 V4-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "x7fQ7w2dCpvVfOLw",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"28"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.36",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @Ender-5 Max-all.json b/resources/profiles/Creality/filament/HP-TPU @Ender-5 Max-all.json
deleted file mode 100644
index c25294789b..0000000000
--- a/resources/profiles/Creality/filament/HP-TPU @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,168 +0,0 @@
-{
-    "type": "filament",
-    "name": "HP-TPU @Ender-5 Max-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "7Y7KjqVEXrce3jKO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2.5"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/HP-TPU @Hi-all.json b/resources/profiles/Creality/filament/HP-TPU @Hi-all.json
index c9b6766149..fa70245521 100644
--- a/resources/profiles/Creality/filament/HP-TPU @Hi-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @Hi-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @Hi-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "x5v3sNNZYWbPIsPN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.36",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @Hi-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "x5v3sNNZYWbPIsPN",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.36",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json
index 079dfebfe2..402f2ee5aa 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "eY1DCIW7WyTnmRYP",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.32",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "eY1DCIW7WyTnmRYP",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.32",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json
index 7e5935cdf7..10df3a7aac 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1 SE-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "3YN3jfV75qyfUZWm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "28"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3.5"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Auto Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "215"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "215"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1 SE-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "3YN3jfV75qyfUZWm",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"28"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3.5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"215"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json
index 62184e78e3..5c684617fd 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "WnGZuBiSGSoGru8C",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "28"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3.5"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Auto Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "215"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "215"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "WnGZuBiSGSoGru8C",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_cost": [
+		"28"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3.5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"215"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1C-all.json
index 6762f0d2d4..b05e59eef3 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1C-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "USI47rUnoJXanAFI",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.32",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "USI47rUnoJXanAFI",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.32",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json
index e7534ade92..fbc05c1853 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1C_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "rCn7lAeHr77FziYn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.32",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1C_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "rCn7lAeHr77FziYn",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.32",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json
index 077936057a..27315ae2b3 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K1_CFS-C-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "N3NDaZzc5XyUm3b1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.32",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K1_CFS-C-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "N3NDaZzc5XyUm3b1",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.32",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json
index 5b979963f0..06c8959858 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json	
@@ -1,172 +1,170 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K2 Plus-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "CNm35YCN42NAgbU1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K2 Plus-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "CNm35YCN42NAgbU1",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json
index 90201f7dcf..5207b1fb9a 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K2 Pro-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "tfrclH3VqZ4nPzi7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle",
-        "Creality K2 Pro 0.6 nozzle",
-        "Creality K2 Pro 0.8 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K2 Pro-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "tfrclH3VqZ4nPzi7",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle",
+		"Creality K2 Pro 0.6 nozzle",
+		"Creality K2 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json
index b3779225c2..27161d5505 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K2 SE-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "IgniOuVC4DtRnxS0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "40"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_cost": [
-        "28"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.4",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K2 SE-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "IgniOuVC4DtRnxS0",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"40"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_cost": [
+		"28"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.4",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @K2-all.json b/resources/profiles/Creality/filament/HP-TPU @K2-all.json
index 3768b17547..6e2f542b0c 100644
--- a/resources/profiles/Creality/filament/HP-TPU @K2-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @K2-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @K2-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "l9E5f6JLwfKo4aG9",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "3"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle",
-        "Creality K2 0.6 nozzle",
-        "Creality K2 0.8 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @K2-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "l9E5f6JLwfKo4aG9",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle",
+		"Creality K2 0.6 nozzle",
+		"Creality K2 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json
index 1d225ec253..fd4b842959 100644
--- a/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json	
@@ -1,183 +1,181 @@
 {
-    "type": "filament",
-    "name": "HP-TPU @SPARKX i7-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "oINMsmmxspqPOW8b",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "40"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "40"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "28"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1.1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "40"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "40"
-    ],
-    "nozzle_temperature": [
-        "220"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "40"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "40"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "40",
-    "customized_plate_temp_initial_layer": "40",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "30",
-    "epoxy_resin_plate_temp_initial_layer": "30",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OFGcMkEB"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "HP-TPU @SPARKX i7-all",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "oINMsmmxspqPOW8b",
+	"filament_id": "OFGcMkEB",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"40"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"35"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"28"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"40"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"40"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "40",
+	"customized_plate_temp_initial_layer": "40",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "30",
+	"epoxy_resin_plate_temp_initial_layer": "30",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.4",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json
index e4a50b5fec..f0b164f891 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @Ender-3 V4-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "utCV4AwQPV4Ums35",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
-    "pressure_advance": "0.038",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @Ender-3 V4-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "utCV4AwQPV4Ums35",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "90",
+	"customized_plate_temp_initial_layer": "90",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]",
+	"pressure_advance": "0.038",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Hyper ABS @Ender-5 Max-all.json
deleted file mode 100644
index 097434bdc4..0000000000
--- a/resources/profiles/Creality/filament/Hyper ABS @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,166 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "jPfMyNBquP31h2Eb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "20"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.92"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "60"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "overhang_fan_speed": [
-        "20"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "5"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.025",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json b/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json
index bb93a96d02..cea3dbeaf2 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @Hi-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "LO4MgYNCtAlMyD11",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "70"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @Hi-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "LO4MgYNCtAlMyD11",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json
index 9749f95e35..5ebb98f5ec 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "PjT9gDai5g9iVBf3",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "PjT9gDai5g9iVBf3",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json
index a303e41640..41d9eb71e1 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "dWKTm246jz7e4QRy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "dWKTm246jz7e4QRy",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json
index b4780cb82d..2e144ab3f0 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "GCj4hOsf9S9DqFdh",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GCj4hOsf9S9DqFdh",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json
index 1ae0bc6ddf..4892e7f33e 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json	
@@ -1,170 +1,168 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "DlsL5Ex7MQ54Yje6",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "DlsL5Ex7MQ54Yje6",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json
index 03f8fbc354..a94b9da7d7 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1C_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "psgahhKiXE7koRWY",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1C_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "psgahhKiXE7koRWY",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json
index d6c76e777f..3d2ad45efd 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K1_CFS-C-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "YbYUo1FfZlLJg4zm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K1_CFS-C-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "YbYUo1FfZlLJg4zm",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json
index 7ecce97627..3b7f42cf81 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K2 Plus-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "lGXmZiCrrwfTeERC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K2 Plus-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "lGXmZiCrrwfTeERC",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json
index de032398b5..90e79e46fd 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K2 Pro-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "01z4QYF33KN1OsBM",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K2 Pro-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "01z4QYF33KN1OsBM",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json
index c3132a18b5..06a397761f 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K2 SE-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "X3WH0zaUg8WyahsO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "1"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K2 SE-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "X3WH0zaUg8WyahsO",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2-all.json
index 63bf93483d..7b0696e39c 100644
--- a/resources/profiles/Creality/filament/Hyper ABS @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper ABS @K2-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Hyper ABS @K2-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "B0mfi4oxoUIDW2Lv",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF8GnyFU"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper ABS @K2-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "B0mfi4oxoUIDW2Lv",
+	"filament_id": "OF8GnyFU",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"22"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json
index d4deb0be89..f33623ab68 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "snqNKAAquQRA20Ik",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.84"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "3"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "snqNKAAquQRA20Ik",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.84"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"3"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json
index 182364977c..6627a67132 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json	
@@ -1,170 +1,168 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "nhmKUDLK6wxVO1vH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_long_retractions_when_cut": "nil",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_retraction_distances_when_cut": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_stamping_distance": "0",
-    "filament_stamping_loading_speed": "0",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "idle_temperature": "0",
-    "material_flow_dependent_temperature": "0",
-    "pellet_flow_coefficient": "0.4157",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nhmKUDLK6wxVO1vH",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_long_retractions_when_cut": "nil",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retraction_distances_when_cut": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_stamping_distance": "0",
+	"filament_stamping_loading_speed": "0",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"idle_temperature": "0",
+	"material_flow_dependent_temperature": "0",
+	"pellet_flow_coefficient": "0.4157",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json
index 2bc12a6918..fe2b9f7363 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json	
@@ -1,148 +1,146 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "MEaOGHy3pWSd1Gj3",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MEaOGHy3pWSd1Gj3",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json
index 065b9ac77e..8327a3c474 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json	
@@ -1,148 +1,146 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "xCioj1jNunIX2GBK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "xCioj1jNunIX2GBK",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json
index 872eeca4dc..2e44a0a1e1 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "xye2OhGeKqg44ya7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "xye2OhGeKqg44ya7",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json
index 3685dbd854..7aee7bad01 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "EXxV0Fo4rexuxidn",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "EXxV0Fo4rexuxidn",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json
index 718112bd7b..b104bf3181 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "lfP5u92yfXRedGuy",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.09",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "lfP5u92yfXRedGuy",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.09",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json
index df0df361ad..8a6a13f3d5 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "U1kZq5P21qnFe5NC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "U1kZq5P21qnFe5NC",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json
index cf2c873e77..22fa11fcbd 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "4O7avB3eSA1pKDxz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.76"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4O7avB3eSA1pKDxz",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.76"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json
index 9b06765831..36aa61a725 100644
--- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Hyper L-W PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "gkzTfze1OQmP8zgE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "48.9"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.85"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF70zbGS"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper L-W PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "gkzTfze1OQmP8zgE",
+	"filament_id": "OF70zbGS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"48.9"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json b/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json
index 4c39c1ac1a..c73ae6faaf 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "8PNVp96HmPvjOBVq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "299",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.052",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle",
-        "Creality Hi 0.6 nozzle",
-        "Creality Hi 0.8 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "8PNVp96HmPvjOBVq",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "299",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.052",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle",
+		"Creality Hi 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json
index 53ab1e078e..33bbebc96c 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "MHaJR8CAtuSwUOIx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,210],  [1.2,210],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MHaJR8CAtuSwUOIx",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,210],  [1.2,210],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json
index 9e267d07cf..c1db54775e 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zY0hIYvTg3v2wyOJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zY0hIYvTg3v2wyOJ",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json
index 67c567791c..04cf190fe5 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "14znq0LtaUx1RUP5",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle",
-        "Creality K2 Pro 0.6 nozzle",
-        "Creality K2 Pro 0.8 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "14znq0LtaUx1RUP5",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle",
+		"Creality K2 Pro 0.6 nozzle",
+		"Creality K2 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json
index b5182102e4..d1f28127d9 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zD3EOJFcZOuhQHmk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle",
-        "Creality K2 0.6 nozzle",
-        "Creality K2 0.8 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zD3EOJFcZOuhQHmk",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle",
+		"Creality K2 0.6 nozzle",
+		"Creality K2 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json
index 9817bd9701..c15cf1eb24 100644
--- a/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json	
@@ -1,183 +1,181 @@
 {
-    "type": "filament",
-    "name": "Hyper Luminous @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "DKQgoZvvkOBsEJCA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "28.9"
-    ],
-    "filament_density": [
-        "1.3"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.028",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFC1PzXz"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Luminous @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "DKQgoZvvkOBsEJCA",
+	"filament_id": "OFC1PzXz",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"28.9"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.028",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json b/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json
index 614c8a9ac8..8e9c401520 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "K6SS7X2jvyXsEgaR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "K6SS7X2jvyXsEgaR",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json
index 1fdeb7e4d3..03b8df1632 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "8dYJk1STVIRB2JWw",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "299",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "8dYJk1STVIRB2JWw",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "299",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json
index 3430271e86..442f07f967 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "SWzt8p5UBfgMauNE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SWzt8p5UBfgMauNE",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json
index f92a629e09..faf5d0decc 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "gZLo5W0F3NLFCkvg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "gZLo5W0F3NLFCkvg",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json
index 0443b606a1..3431ed9ef6 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "JDAiAZKjxEoWKDwW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JDAiAZKjxEoWKDwW",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json
index 87c217d5db..90d07ec109 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "X2fgUYasv7lNEoqK",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "3"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "X2fgUYasv7lNEoqK",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"35"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"3"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json
index 90047e7778..5713b0658d 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "CITMYaFiwchQ3xoo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "CITMYaFiwchQ3xoo",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json
index a0bc0bbfbc..3173e61657 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "PyazquNRWsPUM2bt",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "3"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "244",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "PyazquNRWsPUM2bt",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"3"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "244",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2-all.json
index 09eb2487d3..db38166659 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @K2-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "YxvU7wRdgrtckCa7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "YxvU7wRdgrtckCa7",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json
index 746332ab6a..5b053dbfb6 100644
--- a/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "Hyper Marble @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "teddd8l8D8ASmYQs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "23.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFLzx3J4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Marble @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "teddd8l8D8ASmYQs",
+	"filament_id": "OFLzx3J4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"23.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json
index d5d494f3f4..8898401856 100644
--- a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json	
@@ -1,199 +1,197 @@
 {
-    "type": "filament",
-    "name": "Hyper PA6-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "ns7xy8v6L92XsDy2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "45.9"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "290"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFn2GlhY"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PA6-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "ns7xy8v6L92XsDy2",
+	"filament_id": "OFn2GlhY",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"45.9"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"290"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json
index 97f41d5746..3b38cfe77c 100644
--- a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json	
@@ -1,199 +1,197 @@
 {
-    "type": "filament",
-    "name": "Hyper PA6-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "FNuPosBKWyq79bjR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "45.9"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "290"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFn2GlhY"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PA6-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "FNuPosBKWyq79bjR",
+	"filament_id": "OFn2GlhY",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"45.9"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"290"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json
index 658908446c..23cdb0975c 100644
--- a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Hyper PA612-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "2xgxuOoGNlO9lEs4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "60"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "60"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "59.9"
-    ],
-    "filament_density": [
-        "1.03"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "290"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFhkN0a7"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PA612-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "2xgxuOoGNlO9lEs4",
+	"filament_id": "OFhkN0a7",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"59.9"
+	],
+	"filament_density": [
+		"1.03"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"290"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json
index 40870d5cd3..08b65aaff2 100644
--- a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json	
@@ -1,193 +1,191 @@
 {
-    "type": "filament",
-    "name": "Hyper PA612-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "sDTzKRsBAaiOxA5I",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "59.9"
-    ],
-    "filament_density": [
-        "1.03"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "290"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFhkN0a7"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PA612-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "sDTzKRsBAaiOxA5I",
+	"filament_id": "OFhkN0a7",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"59.9"
+	],
+	"filament_density": [
+		"1.03"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"290"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.048",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json
index 915b8b67d9..9b72dd5cb9 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json	
@@ -1,196 +1,194 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "98Dhy7By3Sp6lISa",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "98Dhy7By3Sp6lISa",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json
index 3529603ba6..47b8eac520 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json	
@@ -1,197 +1,195 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K1C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "SpXh27tlQXEbxDUk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K1C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "SpXh27tlQXEbxDUk",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json
index a2c841f463..c2f554abca 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json	
@@ -1,197 +1,195 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "ShD1PW5HWkjnHXrd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "ShD1PW5HWkjnHXrd",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json
index c597cd9c95..564d6b08e9 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json	
@@ -1,197 +1,195 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "wzYQ0bizO8RDWjSX",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "105"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "wzYQ0bizO8RDWjSX",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json
index 67d0b403cc..57a1904fdd 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json	
@@ -1,194 +1,192 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "NneN5bFLYVXNPzlM",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "NneN5bFLYVXNPzlM",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"90"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json
index f7e37afe69..0e9eb9a6c1 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json	
@@ -1,184 +1,182 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "wl8JhmCp9Be3cYMJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "wl8JhmCp9Be3cYMJ",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.042",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json
index 1f97108309..7077971f51 100644
--- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json	
@@ -1,184 +1,182 @@
 {
-    "type": "filament",
-    "name": "Hyper PAHT-CF @K2-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "jtElnQJxHKLDQSHo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "74.9"
-    ],
-    "filament_density": [
-        "1.06"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "4"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "100",
-    "customized_plate_temp_initial_layer": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF4APyxe"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PAHT-CF @K2-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "jtElnQJxHKLDQSHo",
+	"filament_id": "OF4APyxe",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"74.9"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "100",
+	"customized_plate_temp_initial_layer": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json
index 85d5d66252..a1c7e7d72f 100644
--- a/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json	
@@ -1,171 +1,169 @@
 {
-    "type": "filament",
-    "name": "Hyper PC @K2 Plus-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "zhN9dkzeJWtsAKj8",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "110"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "110"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "100"
-    ],
-    "filament_density": [
-        "1.19"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFUF7oA4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PC @K2 Plus-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "zhN9dkzeJWtsAKj8",
+	"filament_id": "OFUF7oA4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"110"
+	],
+	"cool_plate_temp_initial_layer": [
+		"110"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"100"
+	],
+	"filament_density": [
+		"1.19"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.03",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json
index 7592b6dbcf..d0d64e7b44 100644
--- a/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json	
@@ -1,173 +1,171 @@
 {
-    "type": "filament",
-    "name": "Hyper PC @K2 Pro-all",
-    "inherits": "fdm_filament_pc",
-    "from": "system",
-    "setting_id": "6NMso8XW9632vz5s",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "37"
-    ],
-    "filament_density": [
-        "1.19"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "70%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFUF7oA4"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PC @K2 Pro-all",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "6NMso8XW9632vz5s",
+	"filament_id": "OFUF7oA4",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"37"
+	],
+	"filament_density": [
+		"1.19"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json
index a333d63f3d..0ee32c0b6b 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @Ender-3 V4-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "EDl8nfZRP1T8CBOs",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,230],[1.2,250]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @Ender-3 V4-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "EDl8nfZRP1T8CBOs",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,230],[1.2,250]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Hyper PETG @Ender-5 Max-all.json
deleted file mode 100644
index fe1f0fbded..0000000000
--- a/resources/profiles/Creality/filament/Hyper PETG @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "nr57CpZ5PwPmcOCR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],[1.0,240]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json b/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json
index 5998e1e8bd..ad9fd276d2 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @Hi-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "ZKLZLxxyjfbdAYZ4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
-    "pressure_advance": "0.066",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @Hi-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "ZKLZLxxyjfbdAYZ4",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"pressure_advance": "0.066",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json
index 6bd1f3afea..0a066f747d 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "Bcgdo3fx6xntQ68t",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "Bcgdo3fx6xntQ68t",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json
index 058dfe5bd6..cc22c69934 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "huvZfn5aMetsY1qr",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.068",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "huvZfn5aMetsY1qr",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.068",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json
index f1ceb825e9..226e28d3b5 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "cyl9yuFghMkUh21u",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.068",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "cyl9yuFghMkUh21u",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.068",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json
index 175aa8099c..db25402dd2 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json	
@@ -1,155 +1,153 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "HYCr4pafWTw3btkg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.072",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "HYCr4pafWTw3btkg",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.072",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json
index be8e2c58f5..f7407295d3 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1C_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "6vOJLefZfaXZTSae",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.072",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1C_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "6vOJLefZfaXZTSae",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.072",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json
index 9bf2512abe..ce72e4463d 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K1_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "FeLhYkEwkavAVWlq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
-    "pressure_advance": "0.068",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K1_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "FeLhYkEwkavAVWlq",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]",
+	"pressure_advance": "0.068",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json
index 983556224b..18a4380b95 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K2 Plus-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "LLehESBAwc7JG1sb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "24.99"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "74.3"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K2 Plus-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "LLehESBAwc7JG1sb",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"74.3"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json
index 32a8fae98b..ab7da092fd 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K2 Pro-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "FEZohKnhkTIWLIGo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K2 Pro-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "FEZohKnhkTIWLIGo",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json
index cc058c4511..cd1a81f895 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json	
@@ -1,158 +1,156 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K2 SE-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "YKt97IZEOlPbNE45",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
-    "pressure_advance": "0.07",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K2 SE-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "YKt97IZEOlPbNE45",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]",
+	"pressure_advance": "0.07",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2-all.json
index 9bbf24c47f..a65c05ac70 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @K2-all.json	
@@ -1,148 +1,146 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @K2-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "tA9uY8ONg89tnmBS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @K2-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "tA9uY8ONg89tnmBS",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json
index d8db7fd923..6f13c7f91b 100644
--- a/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json	
@@ -1,164 +1,162 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG @SPARKX i7-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "KCinMkKfbIlmgNY5",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.96"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFujZSdh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG @SPARKX i7-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "KCinMkKfbIlmgNY5",
+	"filament_id": "OFujZSdh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json
index 69662a0296..9eb34dc9bf 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "Xas7n19K71hs4LDE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "90"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "Xas7n19K71hs4LDE",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"90"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json
index 1005d22d7f..8f75ada3bd 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json	
@@ -1,139 +1,137 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K1C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "Qb08ZrBwuO8zt4AH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "90"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K1C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "Qb08ZrBwuO8zt4AH",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"90"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json
index e9008aede1..452436bc5f 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json	
@@ -1,139 +1,137 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "DoTcUw5GMoTHQg7e",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "90"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "DoTcUw5GMoTHQg7e",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"90"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json
index 2358ec054e..57d1162f5c 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "CcmwXMNgZWg8VguD",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "90"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "CcmwXMNgZWg8VguD",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"90"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "80",
+	"epoxy_resin_plate_temp_initial_layer": "80",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json
index 252b6dad9c..cbc2e8a34c 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json	
@@ -1,142 +1,140 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K2 Plus-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "DyG4SbAXKKPcZtrz",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K2 Plus-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "DyG4SbAXKKPcZtrz",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json
index 1962c54912..55789a7c2e 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K2 Pro-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "kit5JfJiicLJF4zF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.94"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K2 Pro-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "kit5JfJiicLJF4zF",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json
index 68ae2439d7..953587853c 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @K2-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "sqyA1OhRFwfJdaQC",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @K2-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "sqyA1OhRFwfJdaQC",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json
index a3ab600254..f0feb6547b 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json	
@@ -1,167 +1,165 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-CF @SPARKX i7-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "ysPPxXtL5M7eQwOp",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "70"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "260"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "70",
-    "epoxy_resin_plate_temp_initial_layer": "70",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
-    "pressure_advance": "0.028",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFusbWjj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-CF @SPARKX i7-all",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"setting_id": "ysPPxXtL5M7eQwOp",
+	"filament_id": "OFusbWjj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"70"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "80",
+	"customized_plate_temp_initial_layer": "80",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "70",
+	"epoxy_resin_plate_temp_initial_layer": "70",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,240],[1.2,260]]",
+	"pressure_advance": "0.028",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json
index 9fdfe1559b..39f76b7763 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-GF @K1C-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "nEDeotPVKPCQe8Nb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.32"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFLgwqp2"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-GF @K1C-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "nEDeotPVKPCQe8Nb",
+	"filament_id": "OFLgwqp2",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.32"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json
index 820b021b9e..ec871d7de8 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-GF @K2 Plus-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "usQ7v9aSP9GkBJlW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.32"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "70",
-    "customized_plate_temp_initial_layer": "70",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFLgwqp2"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-GF @K2 Plus-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "usQ7v9aSP9GkBJlW",
+	"filament_id": "OFLgwqp2",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.32"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "70",
+	"customized_plate_temp_initial_layer": "70",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json
index 3129330404..37cf3dfdc2 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-GF @K2 Pro-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "9cVMYbupJs6RNOy7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.32"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFLgwqp2"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-GF @K2 Pro-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "9cVMYbupJs6RNOy7",
+	"filament_id": "OFLgwqp2",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.32"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json
index eafa06d339..6e883d6663 100644
--- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper PETG-GF @K2-all",
-    "inherits": "fdm_filament_common",
-    "from": "system",
-    "setting_id": "LFtfaG6s8REfWmjg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "29.9"
-    ],
-    "filament_density": [
-        "1.32"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_type": [
-        "PETG-GF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFLgwqp2"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PETG-GF @K2-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "LFtfaG6s8REfWmjg",
+	"filament_id": "OFLgwqp2",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"29.9"
+	],
+	"filament_density": [
+		"1.32"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_type": [
+		"PETG-GF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json
index 8fbc885c07..ed04e85cd6 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "jO61I2nsJ2yY0WG4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "jO61I2nsJ2yY0WG4",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Hyper PLA @Ender-5 Max-all.json
deleted file mode 100644
index 6c5bac864d..0000000000
--- a/resources/profiles/Creality/filament/Hyper PLA @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,160 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Nb1H9jKg8CPQXLVI",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "45",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.5,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json b/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json
index c5297f78ed..231c96f808 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "AG1UL48Bof1wFYDF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[2.2,200],[3.0,210],[10.0,215],[23.0,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.2 nozzle",
-        "Creality Hi 0.4 nozzle",
-        "Creality Hi 0.6 nozzle",
-        "Creality Hi 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "AG1UL48Bof1wFYDF",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[2.2,200],[3.0,210],[10.0,215],[23.0,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.2 nozzle",
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle",
+		"Creality Hi 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json
index be08cd5bb4..131fc6166d 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "lRYhcdi64EmFem40",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "lRYhcdi64EmFem40",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json
index 2d764065a5..c9a1c2ec02 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "w22rt5ipwYogeRyf",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.038",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle",
-        "Creality K1 SE 0.6 nozzle",
-        "Creality K1 SE 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "w22rt5ipwYogeRyf",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.038",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle",
+		"Creality K1 SE 0.6 nozzle",
+		"Creality K1 SE 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json
index 0c80515aaa..edb0299bd1 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json	
@@ -1,138 +1,136 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "qV4HvI6OV80255YA",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.038",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qV4HvI6OV80255YA",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.038",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json
index 4b3f6b5a60..1b5cb0960a 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "TnpXw6J6vdHtcI0m",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle",
-        "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TnpXw6J6vdHtcI0m",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"35"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json
index f0513b112b..545ca6d21e 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "NkW5cDCzmoseCFmO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NkW5cDCzmoseCFmO",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"35"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json
index c4175d3ead..363e4d1fff 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Q74GgG8YgUE29949",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Q74GgG8YgUE29949",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,190],  [1.2,190],  [1.3,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json
index 193bf2dee6..a56f03f226 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "CCn1pBWY533DPO2I",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.2 nozzle",
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "CCn1pBWY533DPO2I",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json
index 3d8a1cbdd6..8a7ba55748 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "1KX2t8HgeGnCF4Mt",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "30",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle",
-        "Creality K2 Pro 0.6 nozzle",
-        "Creality K2 Pro 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "1KX2t8HgeGnCF4Mt",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "30",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle",
+		"Creality K2 Pro 0.6 nozzle",
+		"Creality K2 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json
index 34f98b70ae..ff07932212 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json	
@@ -1,140 +1,138 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zTFbjztyji63caxW",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zTFbjztyji63caxW",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2-all.json
index f47ea8a5d8..ff2f92dafc 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @K2-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "klq59FDTiu0dk3WO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "30",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle",
-        "Creality K2 0.6 nozzle",
-        "Creality K2 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "klq59FDTiu0dk3WO",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "30",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle",
+		"Creality K2 0.6 nozzle",
+		"Creality K2 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json
index 00afa33b11..8487bf8565 100644
--- a/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "pvnoJu0FPBxRAX6w",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "0",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,205],[1.2,220]]",
-    "pressure_advance": "0.28",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.2 nozzle",
-        "Creality SPARKX i7 0.4 nozzle",
-        "Creality SPARKX i7 0.6 nozzle",
-        "Creality SPARKX i7 0.8 nozzle"
-    ],
-    "filament_id": "OFCZsqXg"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "pvnoJu0FPBxRAX6w",
+	"filament_id": "OFCZsqXg",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,205],[1.2,220]]",
+	"pressure_advance": "0.28",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.2 nozzle",
+		"Creality SPARKX i7 0.4 nozzle",
+		"Creality SPARKX i7 0.6 nozzle",
+		"Creality SPARKX i7 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json
index fb92e57672..6aa016c0a5 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "30n5mJl8L6az4Ugt",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.028",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "30n5mJl8L6az4Ugt",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.028",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-5 Max-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-5 Max-all.json
deleted file mode 100644
index 7592840259..0000000000
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-5 Max-all.json	
+++ /dev/null
@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PLA-CF @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "pW3AHx1VemLWSa7q",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json
index e63ee3717d..87a03604c7 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "l4gTfu7FrFCXseZR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "l4gTfu7FrFCXseZR",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json
index d1a9cb3a38..eef42d1c01 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "jNMBQgVxJOyIVLcq",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "jNMBQgVxJOyIVLcq",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json
index 368b104901..b6fa3185df 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "qmyerfbWbH0wbbk7",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "60"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qmyerfbWbH0wbbk7",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json
index 215a01e8a7..b205835d92 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1 SE_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "l8sx6lH2mvQLZObS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "60"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
-    "pressure_advance": "0.036",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 SE_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1 SE_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "l8sx6lH2mvQLZObS",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]",
+	"pressure_advance": "0.036",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 SE_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json
index d6d269db66..89a64caad9 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "23SZfDiYXhm9hn5G",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "23SZfDiYXhm9hn5G",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json
index 5ed8fbe15f..7c2ebcd7fa 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ITQgXSnjWFeY68wT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ITQgXSnjWFeY68wT",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json
index fe506e1147..5947f13e5c 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json	
@@ -1,157 +1,155 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "9rf6iQ0xQuReogCt",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.02",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "9rf6iQ0xQuReogCt",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
+	"pressure_advance": "0.02",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json
index f9267d07e8..078a075008 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GjpBicP4kPE8flGx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GjpBicP4kPE8flGx",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json
index 9c465b0d30..2e1f5752d6 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Y4er7SRg27NLBiG1",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Y4er7SRg27NLBiG1",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json
index 94ac06f8bb..a22777631f 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json	
@@ -1,149 +1,147 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "NBqaRVKwrOk8znjG",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NBqaRVKwrOk8znjG",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json
index d0344132b6..ef5c46b673 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "L7pciawKG1j3Q543",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "L7pciawKG1j3Q543",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"23"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json
index 53b640d939..7427735721 100644
--- a/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json	
@@ -1,176 +1,174 @@
 {
-    "type": "filament",
-    "name": "Hyper PLA-CF @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "18bK3EZVaHGwGmsL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFTnWzBs"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PLA-CF @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "18bK3EZVaHGwGmsL",
+	"filament_id": "OFTnWzBs",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"32"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json
index c817224955..11b26eae81 100644
--- a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json	
@@ -1,185 +1,183 @@
 {
-    "type": "filament",
-    "name": "Hyper PPA-CF @K2 Plus-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "ltnrZwbu4XXaDTkF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "89.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "70"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle",
-        "Creality K2 Plus 0.6 nozzle",
-        "Creality K2 Plus 0.8 nozzle"
-    ],
-    "filament_id": "OFNvBIL0"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PPA-CF @K2 Plus-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "ltnrZwbu4XXaDTkF",
+	"filament_id": "OFNvBIL0",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"89.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle",
+		"Creality K2 Plus 0.6 nozzle",
+		"Creality K2 Plus 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json
index 4f7d4ddf2f..1c76caff66 100644
--- a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json	
@@ -1,181 +1,179 @@
 {
-    "type": "filament",
-    "name": "Hyper PPA-CF @K2 Pro-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "wrCqzQPdSReyJSfo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "89.9"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.94"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature": [
-        "300"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "300"
-    ],
-    "nozzle_temperature_range_high": [
-        "320"
-    ],
-    "nozzle_temperature_range_low": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "80"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "0",
-    "epoxy_resin_plate_temp_initial_layer": "0",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFNvBIL0"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper PPA-CF @K2 Pro-all",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "wrCqzQPdSReyJSfo",
+	"filament_id": "OFNvBIL0",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"89.9"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"280"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "0",
+	"epoxy_resin_plate_temp_initial_layer": "0",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.044",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json b/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json
index 02756e4af3..05abf81f1d 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json	
@@ -1,156 +1,154 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Jg5EAOLRZBLTvozN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Jg5EAOLRZBLTvozN",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json
index 0af9505f19..9a050ee4b8 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "hwto2aYfebw6i6sm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "hwto2aYfebw6i6sm",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json
index 7afa71cd4c..37d9c6b652 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "GC5jc2gUOL34TtA2",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GC5jc2gUOL34TtA2",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json
index 058d4439ea..6a55b510b4 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zqZR6xEtm9Gokib0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "0.4"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "249",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zqZR6xEtm9Gokib0",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "249",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json
index f90af90902..c61f91d90a 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "fWmKrIlCzeemGvXQ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "fWmKrIlCzeemGvXQ",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.8,200],  [1.2,200],  [1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json
index 7580e9f4e9..d33ce12919 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Q0hz1XpiWQeZhcjF",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "3"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Q0hz1XpiWQeZhcjF",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"35"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"3"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json
index 1e307464b1..b6fa563aa5 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "SjkfsdLhjA5CFsCl",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SjkfsdLhjA5CFsCl",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json
index 9134285053..5781afd1cd 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json	
@@ -1,143 +1,141 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "O2BLGgWwKLgovOmm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "3"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "O2BLGgWwKLgovOmm",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"3"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json
index 154376069e..3ff2394a43 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json	
@@ -1,161 +1,159 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "4OC4zOZaAUUsyu27",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "Slope Lift"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4OC4zOZaAUUsyu27",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json
index 43ccb7898c..8d0475a9e7 100644
--- a/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json	
@@ -1,179 +1,177 @@
 {
-    "type": "filament",
-    "name": "Hyper Stardust @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "flyQf6Emi8ND7BDe",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "26.9"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "1"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
-    "pressure_advance": "0.028",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OFXnToSX"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Hyper Stardust @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "flyQf6Emi8ND7BDe",
+	"filament_id": "OFXnToSX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"26.9"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.6,210],[1.2,220]]",
+	"pressure_advance": "0.028",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json
index 62f308a71b..5eddb9e5dd 100644
--- a/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "Panchroma PLA Matte @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ArTNQCA0xnqZKZk9",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "20.99"
-    ],
-    "filament_density": [
-        "1.31"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Polymaker"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "7"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFrOh600"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Panchroma PLA Matte @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ArTNQCA0xnqZKZk9",
+	"filament_id": "OFrOh600",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"20.99"
+	],
+	"filament_density": [
+		"1.31"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json b/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json
index 5d7f4818bd..8016cb164e 100644
--- a/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "Panchroma PLA Satin @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "dK0jvrB1WOFjPf7g",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19.99"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Polymaker"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFPkCJKE"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Panchroma PLA Satin @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "dK0jvrB1WOFjPf7g",
+	"filament_id": "OFPkCJKE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19.99"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json
index 20bd0700ab..f6ca211c24 100644
--- a/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json	
@@ -1,172 +1,170 @@
 {
-    "type": "filament",
-    "name": "PolySonic PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "K3kUZYddQO8SUKKa",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "24.99"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Polymaker"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "230"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF66KUAN"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "PolySonic PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "K3kUZYddQO8SUKKa",
+	"filament_id": "OF66KUAN",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json b/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json
index acd8558abe..384df90aea 100644
--- a/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "PolySonic PLA Pro @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "DEU6e8l8Gbz616Fi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "29.99"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Polymaker"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFKbdiiJ"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "PolySonic PLA Pro @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "DEU6e8l8Gbz616Fi",
+	"filament_id": "OFKbdiiJ",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"29.99"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json
index b159f9141b..d8da599f2e 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json	
@@ -1,153 +1,151 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @Ender-3 V4-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "lMmOE3j5nMNIukQN",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "60",
-    "customized_plate_temp_initial_layer": "60",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
-    "pressure_advance": "0.024",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-3 V4 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @Ender-3 V4-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "lMmOE3j5nMNIukQN",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "60",
+	"customized_plate_temp_initial_layer": "60",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,220]]",
+	"pressure_advance": "0.024",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Ender-3 V4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json
index 163ed96d8a..3e8218631a 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json	
@@ -1,146 +1,144 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @Hi-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "DzjjhzaPhKF7olJU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        " ; filament end gcode"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "dont_slow_down_outer_wall": "1",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.068",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Hi 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @Hi-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "DzjjhzaPhKF7olJU",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		" ; filament end gcode"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"dont_slow_down_outer_wall": "1",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.068",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json
index 5612fad4d2..02f2e4e522 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K1 Max_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "9dhggId2Cg5oR8Qo",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.066",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1 Max_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K1 Max_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "9dhggId2Cg5oR8Qo",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.066",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1 Max_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json
index f975e2b6c4..9bf300cddd 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K1C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "XP2BDRK5jZOC4TYv",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.066",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K1C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "XP2BDRK5jZOC4TYv",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.066",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json
index 9f4c2d9029..f679fcd5cf 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K1C_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "98NLzuVoD8d35zrm",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.066",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1C_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K1C_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "98NLzuVoD8d35zrm",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.066",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1C_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json
index 0c7bd485be..511b5d54c5 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K1_CFS-C-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zovui7ZsQ26KEgYY",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.99"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.074",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K1_CFS-C 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K1_CFS-C-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "zovui7ZsQ26KEgYY",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "50",
+	"epoxy_resin_plate_temp_initial_layer": "50",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.074",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K1_CFS-C 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json
index 06b1fc8729..95cf3dce88 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json	
@@ -1,165 +1,163 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "QJjtgwE6G4TS3V6y",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "80"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "QJjtgwE6G4TS3V6y",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json
index 37702f76c0..bae012fbbf 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K2 Pro-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "cprQoD8o6UmetOxS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "95"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Pro 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K2 Pro-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "cprQoD8o6UmetOxS",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"95"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json
index 7ff723f655..8c52ebabe2 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json	
@@ -1,150 +1,148 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K2 SE-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "vAzjJYRL4Swmyq0z",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "0",
-    "customized_plate_temp_initial_layer": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 SE 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K2 SE-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "vAzjJYRL4Swmyq0z",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"90%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 SE 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json
index 2d68106751..b8eb3d503b 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json	
@@ -1,168 +1,166 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @K2-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "UhE9df2kH6LealCb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "95"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.97"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.06",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @K2-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "UhE9df2kH6LealCb",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"95"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]",
+	"pressure_advance": "0.06",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json
index 9bad5351c2..c7f54e1c4b 100644
--- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json	
+++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json	
@@ -1,174 +1,172 @@
 {
-    "type": "filament",
-    "name": "Soleyin Ultra PLA @SPARKX i7-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "SlwK2b9m8ZQJY4nH",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "55"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "55"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "55"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "80"
-    ],
-    "filament_cost": [
-        "6"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.6"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        ";filament start gcode"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality SPARKX i7 0.4 nozzle"
-    ],
-    "filament_id": "OF02UAVh"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "Soleyin Ultra PLA @SPARKX i7-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SlwK2b9m8ZQJY4nH",
+	"filament_id": "OF02UAVh",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cost": [
+		"6"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		";filament start gcode"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.0,210],[1.2,220]]",
+	"pressure_advance": "0.05",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality SPARKX i7 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json
index 77f2c6a6bf..7e5976dfdf 100644
--- a/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "eSUN ABS+ @K2 Plus-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "7plEfQUFL6qclQ8B",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "60",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFTXduCM"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN ABS+ @K2 Plus-all",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "7plEfQUFL6qclQ8B",
+	"filament_id": "OFTXduCM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "60",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json
index 1afd5f1511..01e9994985 100644
--- a/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json	
@@ -1,159 +1,157 @@
 {
-    "type": "filament",
-    "name": "eSUN ASA+ @K2 Plus-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "WjM4WIPAamvbee7G",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "100"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_cooling_layer_time": [
-        "40"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.1"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "nozzle_temperature": [
-        "270"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "270"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "5"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_layer": "2",
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "50",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFUmS5z5"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN ASA+ @K2 Plus-all",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "WjM4WIPAamvbee7G",
+	"filament_id": "OFUmS5z5",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_layer": "2",
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "50",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "90",
+	"epoxy_resin_plate_temp_initial_layer": "90",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json
index 08ab12e2c9..f7822a2487 100644
--- a/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json	
@@ -1,189 +1,187 @@
 {
-    "type": "filament",
-    "name": "eSUN PET-Basic @K2 Plus-all",
-    "inherits": "fdm_filament_pet",
-    "from": "system",
-    "setting_id": "fJJfZCZc5MrXX1Lg",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "105"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "105"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "40"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_density": [
-        "1.28"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PET"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "temperature_vitrification": [
-        "110"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "60",
-    "epoxy_resin_plate_temp_initial_layer": "60",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFHaYaB1"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PET-Basic @K2 Plus-all",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "fJJfZCZc5MrXX1Lg",
+	"filament_id": "OFHaYaB1",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.28"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PET"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json
index d4f35de9be..83240e0283 100644
--- a/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json	
@@ -1,163 +1,161 @@
 {
-    "type": "filament",
-    "name": "eSUN PLA+ @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "AW7HLQJ78DAEUjge",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "6"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "53"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFqINlYj"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PLA+ @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "AW7HLQJ78DAEUjge",
+	"filament_id": "OFqINlYj",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"53"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "55",
+	"customized_plate_temp_initial_layer": "55",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "45",
+	"epoxy_resin_plate_temp_initial_layer": "45",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json
index 2e4b7703a0..6db1c4631d 100644
--- a/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "eSUN PLA-LW @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "9lAD1qJIwwtcSvk0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "45"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "45"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.2"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.86"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "6"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "1"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-    "pressure_advance": "0.1",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFi5RSve"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PLA-LW @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "9lAD1qJIwwtcSvk0",
+	"filament_id": "OFi5RSve",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.86"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "0",
+	"chamber_temperature": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+	"pressure_advance": "0.1",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json
index d5f4324da1..b9be49bb1c 100644
--- a/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json	
@@ -1,169 +1,167 @@
 {
-    "type": "filament",
-    "name": "eSUN PLA-Lite @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "om2444MoWYK7ZCqS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "13"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "53"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFhbolij"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PLA-Lite @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "om2444MoWYK7ZCqS",
+	"filament_id": "OFhbolij",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"53"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json
index bca728ae00..3bdb36e816 100644
--- a/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "eSUN PLA-Matte @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "BYYGdJpoZG5BXr1r",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_density": [
-        "1.33"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "51"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFDETOM6"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PLA-Matte @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BYYGdJpoZG5BXr1r",
+	"filament_id": "OFDETOM6",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_density": [
+		"1.33"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"51"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json
index fa57453069..2d41fc01a8 100644
--- a/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json	
+++ b/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json	
@@ -1,166 +1,164 @@
 {
-    "type": "filament",
-    "name": "eSUN PLA-Silk @K2 Plus-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "IfZwVzcyYM0D5XR0",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "100"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "50"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "50"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "19"
-    ],
-    "filament_density": [
-        "1.21"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.2"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "eSUN"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "temperature_vitrification": [
-        "50"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
-    ],
-    "filament_end_gcode": [
-        ";filament end gcode "
-    ],
-    "activate_chamber_temp_control": "1",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "100",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "0",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "40",
-    "epoxy_resin_plate_temp_initial_layer": "40",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality K2 Plus 0.4 nozzle"
-    ],
-    "filament_id": "OFIRUqWi"
-}
\ No newline at end of file
+	"type": "filament",
+	"name": "eSUN PLA-Silk @K2 Plus-all",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "IfZwVzcyYM0D5XR0",
+	"filament_id": "OFIRUqWi",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"50"
+	],
+	"cool_plate_temp_initial_layer": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"50"
+	],
+	"eng_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_cost": [
+		"19"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"50"
+	],
+	"hot_plate_temp_initial_layer": [
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"50"
+	],
+	"textured_plate_temp_initial_layer": [
+		"50"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_end_gcode": [
+		";filament end gcode "
+	],
+	"activate_chamber_temp_control": "1",
+	"chamber_temperature": "35",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_special_cds_fan_speed": "100",
+	"customized_plate_temp": "50",
+	"customized_plate_temp_initial_layer": "50",
+	"default_filament_colour": "\"\"",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"epoxy_resin_plate_temp": "40",
+	"epoxy_resin_plate_temp_initial_layer": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_shrink": "100%",
+	"filament_toolchange_delay": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"material_flow_dependent_temperature": "0",
+	"pressure_advance": "0.04",
+	"support_material_interface_fan_speed": "-1",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json
index 1911d1f0d0..f28e3fc7a6 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "creality_ender3v3ke_buildplate_model.stl",
 	"bed_texture": "creality_ender3v3ke_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
+	"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all;Generic PLA @System"
 }
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json
index 3c1fcae969..5829268d2e 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality Ender-3 V4 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "R96v98fNsXyf9HXq",
+	"instantiation": "true",
 	"printer_model": "Creality Ender-3 V4",
 	"auxiliary_fan": "0",
 	"bbl_use_printhost": "0",
@@ -69,7 +71,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -105,7 +106,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality Ender-3 V4 0.4 nozzle",
-	"setting_id": "R96v98fNsXyf9HXq"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4.json b/resources/profiles/Creality/machine/Creality Ender-3 V4.json
index 22fc2a9c6a..3229f33792 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V4.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V4.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_Ender_3_V4",
-	"default_materials": "Creality Generic ABS @Ender-3 V4-all;Creality Generic ASA @Ender-3 V4-all;Creality Generic PETG @Ender-3 V4-all;Creality Generic PLA @Ender-3 V4-all;Creality Generic PLA Matte @Ender-3 V4-all;Creality Generic PLA Silk @Ender-3 V4-all;Creality Generic TPU @Ender-3 V4-all"
+	"default_materials": "Generic ABS @Ender-3 V4-all;Generic ASA @System;Generic PETG @Ender-3 V4-all;Generic PLA @Ender-3 V4-all;Generic PLA Matte @System;Generic PLA-Silk @Ender-3 V4-all;Generic TPU @Ender-3 V4-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json
index fb15db7ab3..496a977127 100644
--- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json	
@@ -72,7 +72,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json
index f895c93b42..59d08460d5 100644
--- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality Ender-5 Max 0.6 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "1idSrUiK9hZwCJNy",
+	"instantiation": "true",
 	"printer_model": "Creality Ender-5 Max",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -74,7 +76,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -113,7 +114,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality Ender-5 Max 0.6 nozzle",
-	"setting_id": "1idSrUiK9hZwCJNy"
-}
\ No newline at end of file
+	"z_hop_types": "Slope Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json
index 2fad99bcea..fcfa26e790 100644
--- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality Ender-5 Max 0.8 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "mPvxCeNkSTMYta2L",
+	"instantiation": "true",
 	"printer_model": "Creality Ender-5 Max",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -74,7 +76,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -113,7 +114,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality Ender-5 Max 0.8 nozzle",
-	"setting_id": "mPvxCeNkSTMYta2L"
-}
\ No newline at end of file
+	"z_hop_types": "Slope Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max.json b/resources/profiles/Creality/machine/Creality Ender-5 Max.json
index 9c10f97f05..08079fdfca 100644
--- a/resources/profiles/Creality/machine/Creality Ender-5 Max.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-5 Max.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "creality_ender5max_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_bed_type": "Textured PEI Plate",
-	"default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Generic TPU @Creality Ender-5Max-all;Generic ASA @Creality Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Generic PLA @Creality Ender-5Max-all;Generic PETG @Creality Ender-5Max-all;Generic ABS @Creality Ender-5Max-all;Generic PA @Creality Ender-5Max-all"
+	"default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Generic TPU @Creality Ender-5Max-all;Generic ASA @Creality Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Generic PLA @Creality Ender-5Max-all;Generic PETG @Creality Ender-5Max-all;Generic ABS @Creality Ender-5Max-all;Generic PA @Creality Ender-5Max-all;Generic PLA @System"
 }
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json
index 57dcd7e949..2acc80fe3d 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality Hi 0.2 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "Qr6oR8AJNy1QmytY",
+	"instantiation": "true",
 	"printer_model": "Creality Hi",
 	"printer_structure": "i3",
 	"default_print_profile": "0.1mm Standard @Creality Hi 0.2 nozzle",
@@ -78,7 +80,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "1",
@@ -118,7 +119,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Auto Lift",
-	"name": "Creality Hi 0.2 nozzle",
-	"setting_id": "Qr6oR8AJNy1QmytY"
-}
\ No newline at end of file
+	"z_hop_types": "Auto Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json
index 0372431a1e..613089a72c 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json	
@@ -178,7 +178,6 @@
 	"printer_technology": "FFF",
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "1",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json
index f7bcd5884d..95d55f0a56 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json	
@@ -178,7 +178,6 @@
 	"printer_technology": "FFF",
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "1",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json
index 23e19a2a66..dcf32371d4 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality Hi 0.8 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "Q7M2ihdHisSVLDGF",
+	"instantiation": "true",
 	"printer_model": "Creality Hi",
 	"printer_structure": "i3",
 	"default_print_profile": "0.40mm Standard @Creality Hi 0.8 nozzle",
@@ -73,7 +75,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "1",
@@ -110,7 +111,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Auto Lift",
-	"name": "Creality Hi 0.8 nozzle",
-	"setting_id": "Q7M2ihdHisSVLDGF"
-}
\ No newline at end of file
+	"z_hop_types": "Auto Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality Hi.json b/resources/profiles/Creality/machine/Creality Hi.json
index 279daf531c..8bb1244b8d 100644
--- a/resources/profiles/Creality/machine/Creality Hi.json	
+++ b/resources/profiles/Creality/machine/Creality Hi.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "creality_hi_buildplate_texture.svg",
 	"default_bed_type": "Textured PEI Plate",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Creality Hi-all;Generic ABS @Hi-all;Generic ASA @Creality Hi-all;Generic ASA-CF @Creality Hi-all;Generic PETG @Creality Hi-all;Generic PETG @Hi-all;Generic PETG-CF @Creality Hi-all;Generic PLA @Creality Hi-all;Generic PLA @Hi-all;Generic PLA High Speed @Creality Hi-all;Generic PLA Matte @Creality Hi-all;Generic PLA Silk @Creality Hi-all;Generic PLA-CF @Creality Hi-all;Generic PLA Wood @Creality Hi-all;Generic TPU @Creality Hi-all"
+	"default_materials": "Generic ABS @Creality Hi-all;Generic ABS @Hi-all;Generic ASA @Creality Hi-all;Generic ASA-CF @Creality Hi-all;Generic PETG @Creality Hi-all;Generic PETG @Hi-all;Generic PETG-CF @Creality Hi-all;Generic PLA @Creality Hi-all;Generic PLA @Hi-all;Generic PLA High Speed @Creality Hi-all;Generic PLA Matte @Creality Hi-all;Generic PLA Silk @Creality Hi-all;Generic PLA-CF @Creality Hi-all;Generic PLA Wood @Creality Hi-all;Generic TPU @Creality Hi-all;Hyper PLA @Hi-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json
index 4cde2d1f5e..01a3bc7d5d 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
@@ -121,7 +121,7 @@
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-			"Generic PLA HF @Creality"
+		"Generic PLA HF @Creality"
 	],
 	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
@@ -167,7 +167,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json
index afaa516e7e..fdb83b032e 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
@@ -172,7 +172,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json
index 417c088cb7..8cb8e6f169 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
@@ -172,7 +172,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json
index c3978a05eb..291affba77 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
@@ -168,7 +168,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json
index 2ebe0a97c2..523abd4de4 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
@@ -173,7 +173,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json
index b59c1f54a4..c67622c90b 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
@@ -173,7 +173,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json
index 992ae60a0f..6d382f4c09 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1 Max_CFS-C 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "zx1WGvi1Ff3X3RpP",
+	"instantiation": "true",
 	"printer_model": "Creality K1 Max_CFS-C",
 	"auxiliary_fan": "1",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Auto Lift",
-	"name": "Creality K1 Max_CFS-C 0.4 nozzle",
-	"setting_id": "zx1WGvi1Ff3X3RpP"
+	"z_hop_types": "Auto Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json
index 012ad881ea..7170d6b6fb 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_K1_Max_CFS_C",
-	"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality"
+	"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality;Generic PLA @K1 Max_CFS-C-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json
index 95db217016..f8aa68f3c0 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json	
@@ -168,7 +168,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"time_cost": "0",
 	"use_firmware_retraction": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json
index b78cf80658..bbc97a8f5a 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1 SE 0.6 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "x2DzbcUOES62gJTj",
+	"instantiation": "true",
 	"printer_model": "Creality K1 SE",
 	"auxiliary_fan": "0",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "1",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality K1 SE 0.6 nozzle",
-	"setting_id": "x2DzbcUOES62gJTj"
-}
\ No newline at end of file
+	"z_hop_types": "Slope Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json
index 175ff1da66..00282be149 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1 SE 0.8 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "sJR1oCXnOEQ2HZ5O",
+	"instantiation": "true",
 	"printer_model": "Creality K1 SE",
 	"auxiliary_fan": "0",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "1",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality K1 SE 0.8 nozzle",
-	"setting_id": "sJR1oCXnOEQ2HZ5O"
-}
\ No newline at end of file
+	"z_hop_types": "Slope Lift"
+}
diff --git a/resources/profiles/Creality/machine/Creality K1 SE.json b/resources/profiles/Creality/machine/Creality K1 SE.json
index 1cb9769e0e..5d6d0dd51d 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "creality_k1se_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_bed_type": "Textured PEI Plate",
-	"default_materials": "Generic ABS @Creality K1-all;Generic ABS @K1 SE-all;Generic ASA @Creality K1-all;Generic ASA @K1 SE-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PETG @K1 SE-all;Generic PLA @Creality K1-all;Generic PLA @K1 SE-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic PLA-CF @K1 SE-all;Generic TPU @Creality K1-all;Generic TPU @K1 SE-all"
+	"default_materials": "Generic ABS @Creality K1-all;Generic ABS @K1 SE-all;Generic ASA @Creality K1-all;Generic ASA @K1 SE-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PETG @K1 SE-all;Generic PLA @Creality K1-all;Generic PLA @K1 SE-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic PLA-CF @K1 SE-all;Generic TPU @Creality K1-all;Generic TPU @K1 SE-all;Hyper PLA @K1 SE-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json
index 510e17ecf5..8fda2c9f43 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1 SE_CFS-C 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "jAWMfHFcVBnqEqb1",
+	"instantiation": "true",
 	"printer_model": "Creality K1 SE_CFS-C",
 	"auxiliary_fan": "0",
 	"bbl_use_printhost": "0",
@@ -70,7 +72,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -106,7 +107,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality K1 SE_CFS-C 0.4 nozzle",
-	"setting_id": "jAWMfHFcVBnqEqb1"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json
index 835c133338..4c9ed70211 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_K1_SE_CFS_C",
-	"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all"
+	"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all;Generic PLA @K1 SE_CFS-C-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json
index 5d8154c1f1..ac6fd03393 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
@@ -168,7 +168,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json
index 73328c69f4..58e7fa841f 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
@@ -173,7 +173,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json
index 2c59727abf..82edb57d82 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
@@ -173,7 +173,6 @@
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"thumbnails_format": "PNG",
 	"time_cost": "0",
diff --git a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json
index b3221b0dd5..a49967f597 100644
--- a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1C_CFS-C 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "ZhdzT48wvUDLGpPp",
+	"instantiation": "true",
 	"printer_model": "Creality K1C_CFS-C",
 	"auxiliary_fan": "1",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Auto Lift",
-	"name": "Creality K1C_CFS-C 0.4 nozzle",
-	"setting_id": "ZhdzT48wvUDLGpPp"
+	"z_hop_types": "Auto Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1C_CFS-C.json b/resources/profiles/Creality/machine/Creality K1C_CFS-C.json
index 6e80f1fbd4..d68987dd16 100644
--- a/resources/profiles/Creality/machine/Creality K1C_CFS-C.json	
+++ b/resources/profiles/Creality/machine/Creality K1C_CFS-C.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_K1C_CFS_C",
-	"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all"
+	"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all;Generic PLA @K1C_CFS-C-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json
index 04cb946b94..4da0be155c 100644
--- a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K1_CFS-C 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "AnvSIapWvZ2Jpc3T",
+	"instantiation": "true",
 	"printer_model": "Creality K1_CFS-C",
 	"auxiliary_fan": "1",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Auto Lift",
-	"name": "Creality K1_CFS-C 0.4 nozzle",
-	"setting_id": "AnvSIapWvZ2Jpc3T"
+	"z_hop_types": "Auto Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K1_CFS-C.json b/resources/profiles/Creality/machine/Creality K1_CFS-C.json
index c5986ae635..70ea42818a 100644
--- a/resources/profiles/Creality/machine/Creality K1_CFS-C.json	
+++ b/resources/profiles/Creality/machine/Creality K1_CFS-C.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_K1_CFS_C",
-	"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PC @Creality K1-all;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PETG @Creality;Generic TPU @Creality"
+	"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PC @Creality K1-all;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PETG @Creality;Generic TPU @Creality;Generic PLA @K1_CFS-C-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json
index c75b9d04f1..7c12aeadf0 100644
--- a/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json	
@@ -1,9 +1,10 @@
 {
 	"type": "machine",
+	"name": "Creality K2 0.2 nozzle",
+	"inherits": "fdm_creality_common",
 	"from": "system",
 	"setting_id": "8aX66GbijkwrT7DY",
 	"instantiation": "true",
-	"inherits": "fdm_creality_common",
 	"printer_model": "Creality K2",
 	"printer_settings_id": "Creality",
 	"auxiliary_fan": "1",
@@ -108,7 +109,6 @@
 	"printhost_authorization_type": "key",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -181,6 +181,5 @@
 	"z_hop": [
 		"0.4"
 	],
-	"name": "Creality K2 0.2 nozzle",
 	"nozzle_height": "4"
 }
diff --git a/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json
index 1c28315013..867cc80255 100644
--- a/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K2 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "XiWyoJJ90uesQMGs",
+	"instantiation": "true",
 	"printer_model": "Creality K2",
 	"printer_settings_id": "Creality",
 	"auxiliary_fan": "1",
@@ -104,7 +106,6 @@
 	"printhost_authorization_type": "key",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -177,7 +178,6 @@
 	"z_hop": [
 		"0.4"
 	],
-	"name": "Creality K2 0.4 nozzle",
 	"bbl_use_printhost": "0",
 	"bed_exclude_area": "0x0",
 	"bed_mesh_max": "99999,99999",
@@ -201,6 +201,5 @@
 	"long_retractions_when_cut": "1",
 	"retract_lift_enforce": "All Surfaces",
 	"retraction_distances_when_cut": "30",
-	"z_hop_types": "Auto Lift",
-	"setting_id": "XiWyoJJ90uesQMGs"
+	"z_hop_types": "Auto Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json
index 8eb0c83877..65b7831c56 100644
--- a/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json	
@@ -1,9 +1,10 @@
 {
 	"type": "machine",
+	"name": "Creality K2 0.6 nozzle",
+	"inherits": "fdm_creality_common",
 	"from": "system",
 	"setting_id": "xjllrWDeH0ABMI8K",
 	"instantiation": "true",
-	"inherits": "fdm_creality_common",
 	"printer_model": "Creality K2",
 	"printer_settings_id": "Creality",
 	"auxiliary_fan": "1",
@@ -106,7 +107,6 @@
 	"printhost_authorization_type": "key",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -179,7 +179,6 @@
 	"z_hop": [
 		"0.4"
 	],
-	"name": "Creality K2 0.6 nozzle",
 	"adaptive_bed_mesh_margin": "0",
 	"bbl_use_printhost": "0",
 	"bed_exclude_area": "0x0",
diff --git a/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json
index 1281d5934d..cfebdec178 100644
--- a/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json	
@@ -1,9 +1,10 @@
 {
 	"type": "machine",
+	"name": "Creality K2 0.8 nozzle",
+	"inherits": "fdm_creality_common",
 	"from": "system",
 	"setting_id": "O1ardlnBQ2nqCs07",
 	"instantiation": "true",
-	"inherits": "fdm_creality_common",
 	"printer_model": "Creality K2",
 	"printer_settings_id": "Creality",
 	"auxiliary_fan": "1",
@@ -106,7 +107,6 @@
 	"printhost_authorization_type": "key",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
@@ -179,7 +179,6 @@
 	"z_hop": [
 		"0.4"
 	],
-	"name": "Creality K2 0.8 nozzle",
 	"adaptive_bed_mesh_margin": "0",
 	"bbl_use_printhost": "0",
 	"bed_exclude_area": "0x0",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json
index e55e947fac..9f7b11b43f 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json	
@@ -181,7 +181,6 @@
 	"printer_technology": "FFF",
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
-	"silent_mode": "0",
 	"time_cost": "0",
 	"use_firmware_retraction": "0",
 	"use_relative_e_distances": "1",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json
index 9ca340c779..e43f1ab2b5 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json	
@@ -181,7 +181,6 @@
 	"printer_technology": "FFF",
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
-	"silent_mode": "0",
 	"time_cost": "0",
 	"use_firmware_retraction": "0",
 	"use_relative_e_distances": "1",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json
index 4cadba6946..423aaf9373 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json	
@@ -181,7 +181,6 @@
 	"printer_technology": "FFF",
 	"printhost_authorization_type": "key",
 	"printhost_ssl_ignore_revoke": "0",
-	"silent_mode": "0",
 	"time_cost": "0",
 	"use_firmware_retraction": "0",
 	"use_relative_e_distances": "1",
diff --git a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json
index 4b0e4754fc..a1c33a0026 100644
--- a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality K2 SE 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "Blm3dYf9xWwUoaYJ",
+	"instantiation": "true",
 	"printer_model": "Creality K2 SE",
 	"auxiliary_fan": "0",
 	"bbl_use_printhost": "0",
@@ -71,7 +73,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "1",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -107,7 +108,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality K2 SE 0.4 nozzle",
-	"setting_id": "Blm3dYf9xWwUoaYJ"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality K2 SE.json b/resources/profiles/Creality/machine/Creality K2 SE.json
index 5b7ec27ea0..1a0c0901b1 100644
--- a/resources/profiles/Creality/machine/Creality K2 SE.json	
+++ b/resources/profiles/Creality/machine/Creality K2 SE.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_K2_SE",
-	"default_materials": "Generic ABS @Creality K2-all;Generic ASA @Creality K2-all;Generic PETG @Creality K2-all;Generic PLA @Creality K2-all;Generic PLA High Speed @Creality K2-all;Generic PLA Matte @Creality K2-all;Generic PLA Silk @Creality K2-all"
+	"default_materials": "Generic ABS @Creality K2-all;Generic ASA @Creality K2-all;Generic PETG @Creality K2-all;Generic PLA @Creality K2-all;Generic PLA High Speed @Creality K2-all;Generic PLA Matte @Creality K2-all;Generic PLA Silk @Creality K2-all;Generic PLA @K2 SE-all"
 }
diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json
index c2ea633914..6a499942bf 100644
--- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality SPARKX i7 0.2 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "I4qasXKWnIbPgYbu",
+	"instantiation": "true",
 	"printer_model": "Creality SPARKX i7",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -78,7 +80,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -118,7 +119,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality SPARKX i7 0.2 nozzle",
-	"setting_id": "I4qasXKWnIbPgYbu"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json
index 8ee1efeebd..68dedf568b 100644
--- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality SPARKX i7 0.4 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "4usBaKppjmBSZy8N",
+	"instantiation": "true",
 	"printer_model": "Creality SPARKX i7",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -78,7 +80,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -118,7 +119,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality SPARKX i7 0.4 nozzle",
-	"setting_id": "4usBaKppjmBSZy8N"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json
index 70c72ec78f..f13761fa81 100644
--- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality SPARKX i7 0.6 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "6R7l1V4liyafB0lf",
+	"instantiation": "true",
 	"printer_model": "Creality SPARKX i7",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -78,7 +80,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -118,7 +119,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality SPARKX i7 0.6 nozzle",
-	"setting_id": "6R7l1V4liyafB0lf"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json
index d8358eb9dc..053f23fd77 100644
--- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json	
@@ -1,8 +1,10 @@
 {
 	"type": "machine",
-	"from": "system",
-	"instantiation": "true",
+	"name": "Creality SPARKX i7 0.8 nozzle",
 	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "kwyQHmNESgzBBCr0",
+	"instantiation": "true",
 	"printer_model": "Creality SPARKX i7",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
@@ -78,7 +80,6 @@
 	"printhost_ssl_ignore_revoke": "0",
 	"purge_in_prime_tower": "0",
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -118,7 +119,5 @@
 	"wipe": "1",
 	"wipe_distance": "2",
 	"z_hop": "0.4",
-	"z_hop_types": "Slope Lift",
-	"name": "Creality SPARKX i7 0.8 nozzle",
-	"setting_id": "kwyQHmNESgzBBCr0"
+	"z_hop_types": "Slope Lift"
 }
diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7.json b/resources/profiles/Creality/machine/Creality SPARKX i7.json
index 73a5e85ead..4ec6a2a935 100644
--- a/resources/profiles/Creality/machine/Creality SPARKX i7.json	
+++ b/resources/profiles/Creality/machine/Creality SPARKX i7.json	
@@ -9,5 +9,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_SPARKX_i7",
-	"default_materials": "Generic PETG @SPARKX i7-all;Generic PLA @SPARKX i7-all;CR-PLA Matte @SPARKX i7-all;Generic PLA Silk @SPARKX i7-all"
+	"default_materials": "Generic PETG @SPARKX i7-all;Generic PLA @SPARKX i7-all;CR-PLA Matte @SPARKX i7-all;Generic PLA-Silk @SPARKX i7-all"
 }
diff --git a/resources/profiles/Creality/machine/fdm_creality_common.json b/resources/profiles/Creality/machine/fdm_creality_common.json
index 1818e8b54b..1defbe311e 100644
--- a/resources/profiles/Creality/machine/fdm_creality_common.json
+++ b/resources/profiles/Creality/machine/fdm_creality_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json
index 26e3032451..88b73d03e3 100644
--- a/resources/profiles/Creality/machine/fdm_machine_common.json
+++ b/resources/profiles/Creality/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"support_air_filtration": "0",
 	"machine_max_acceleration_e": [
diff --git a/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
index 0ff5143efe..fa3f86d8c1 100644
--- a/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "5FeO8mZypv8CHDpj",
 	"name": "0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "5FeO8mZypv8CHDpj",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],  [1.0,1.5,80,5500],  [1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json
index e993c77b6c..1ee91f8cad 100644
--- a/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "peqHRWTyVxZ2w5WU",
 	"name": "0.08mm HueForge @Creality Hi 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "peqHRWTyVxZ2w5WU",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000,210],[1.0,1.5,80,5500,200],[1.5,2.0,60,5000,190]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json
index 3f0ff3b207..d5f49f7674 100644
--- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "rWpJRnZscjXyKngw",
 	"name": "0.08mm HueForge @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "rWpJRnZscjXyKngw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json
index 6ddf78e2d2..1570aed7cc 100644
--- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "nOd96z5QquzKG3iu",
 	"name": "0.08mm HueForge @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "nOd96z5QquzKG3iu",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json
index ab5c252c2b..cfbba070ec 100644
--- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "uUPLPuPdvODZdBSU",
 	"name": "0.08mm HueForge @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "uUPLPuPdvODZdBSU",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json
index f584a86449..95593ff7f2 100644
--- a/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "KQXt6EPU3DFJ4xLr",
 	"name": "0.08mm HueForge @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "KQXt6EPU3DFJ4xLr",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "20",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -176,7 +174,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "1",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "80%",
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json
index 05da7204cf..121b745758 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Gzis5yvHXQD9PnSf",
 	"name": "0.08mm SuperDetail @Creality Hi",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "Gzis5yvHXQD9PnSf",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000,210],[1.0,1.5,80,5500,200],[1.5,2.0,60,5000,190]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
@@ -244,4 +242,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json
index 7300c45c8d..df9ee89c29 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "jgP5JZdbxUbg8lfB",
 	"name": "0.08mm SuperDetail @Creality K1 (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "jgP5JZdbxUbg8lfB",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json
index adc86b4768..31523e47f4 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "715XKCccsul5FKvC",
 	"name": "0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "715XKCccsul5FKvC",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json
index 976756a212..626636bc5d 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "OhhZPXABlfjJun3o",
 	"name": "0.08mm SuperDetail @Creality K1C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "OhhZPXABlfjJun3o",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json
index 6748914ae7..b16583d310 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "DMPF0xf2yvEWmu4L",
 	"name": "0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "DMPF0xf2yvEWmu4L",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json
index f3f37caca7..c857595ddb 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "CaqcNDTSGWeJ81xw",
 	"name": "0.08mm SuperDetail @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "CaqcNDTSGWeJ81xw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json
index 0144a35372..474a37c964 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "ZqIhsxrzqVs6cFvM",
 	"name": "0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "ZqIhsxrzqVs6cFvM",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json
index 7690eb0206..8bf4ce990c 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json
index 229c5be38a..7edb449976 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "VK8qeRg8ZEHRo2Rk",
 	"name": "0.08mm SuperDetail @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "VK8qeRg8ZEHRo2Rk",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,7 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -242,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
index 26e877b4bf..3db7735d91 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "d22VPSF1SXi5gPOI",
 	"name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "d22VPSF1SXi5gPOI",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
index f9b00d5283..cd8fe57a81 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "T181USiYx4xlKGI9",
 	"name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "T181USiYx4xlKGI9",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json
index 11833d41bc..822b4ce721 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json
index 2edfea780c..de6729076e 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Qq07eSaIWdVHr9mr",
 	"name": "0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "Qq07eSaIWdVHr9mr",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,7 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -242,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json
index 94b622d674..ae638706d1 100644
--- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "1PSmepdqo0eFyI23",
 	"name": "0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "1PSmepdqo0eFyI23",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "20",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -154,7 +152,6 @@
 	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "1",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "80%",
diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json
index fbf0043f01..262ad0538c 100644
--- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
index 6bf1baf2d2..c8e196966b 100644
--- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "V2oWbmagKmmoxbv3",
 	"name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "V2oWbmagKmmoxbv3",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json
index d104a68e6a..d25fe06205 100644
--- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json
index 16bc203a9c..bcdad2f20e 100644
--- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "GqPrfjfOMnakeSmK",
 	"name": "0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "GqPrfjfOMnakeSmK",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -176,7 +174,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "4",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "100%",
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json
index d8e1f7255d..db8752f98d 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json
index 2003ecc36d..27e4e5d21a 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "RxVB6dYHB7XghTJM",
 	"name": "0.12mm Detail @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "RxVB6dYHB7XghTJM",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
index d2c0488bd9..b33edd07d6 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "4QIsAhoHoAXDecGF",
 	"name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "4QIsAhoHoAXDecGF",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
index 6abaf12607..7571ba459e 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "fY34NxARSSe2qjvw",
 	"name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "fY34NxARSSe2qjvw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json
index 3936bfee46..569f61bcd5 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json
index 0c06c325fa..8220879a98 100644
--- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "g1QZLRXoH1joFYs3",
 	"name": "0.12mm Detail @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "g1QZLRXoH1joFYs3",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
index b753d5d697..dc15cc7123 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "eeiPSOyL4ergqQ07",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json
index 420946637a..63bf9e3041 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "wrSsDTXZmqGP7jI6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json
index 080d492adb..0060f44220 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cDZYl2hgnh7Cc99L",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json
index fdac5e080f..7ae0e8f685 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "tSCiJ9olpnfuFwwH",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json
index e6d532895c..0b0eaa5cb6 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QheGOjs9kbqt0RIz",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json
index 9d3526378a..41f8e5b490 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "TduEizRFdShIDRcm",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json
index e54dac4c6f..10c03ba2a4 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Vkv3aPxQr9VEJvaF",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json
index dc47420779..8be588c2d6 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Oc6OFEFHUMPYMB63",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json
index 25c255507a..b87ff8fad8 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "UntNzp8KmgY2dJp5",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json
index bdbcde0c09..2abe6f6862 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "29EqYizz07WCqLH6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json
index e094dec366..cd3243dc7d 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Ud8sbqOYEtSQQT6z",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json
index f04f45f8fb..93e4e9b816 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "NZt7TVAsYcO4KVUO",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json
index 4a98444b8b..0dfcd85243 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "hYyzb4pWqSMccfku",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
index 0c89db070e..1ef7613160 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "BYotUlZcqUXYiUJD",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json
index f5f2c12992..111278f30e 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cRgPV5JRbPRakGVF",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json
index 311aa9f18b..f48c53a417 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Rs3jP38ZEjdPihGT",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
index a9beb01fcf..332c15154f 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "EJAHGtrssuw5Z6ul",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json
index 82c3f7e5f9..b31ed27ee6 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "qPcJyOUL611jQfcb",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json
index 812595bf28..411ea32b28 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "JM7OGS3Cjxqg6wFn",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json
index c01491ecfa..9e4bb3c054 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json	
@@ -6,7 +6,6 @@
 	"from": "system",
 	"setting_id": "W68mSPdmat2rCXuD",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json
index 797cbcafc9..66a4aa97e0 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "WS8Z9BGDgjWP3pQJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json
index 202ac828bc..5bcec917a2 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "kkfspmZozKFg5BA4",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json
index d452d0e75e..753f7dee03 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pMT5vO5IBWX9wZLG",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json
index d332eeaf3b..13ab3bb638 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "BqQTYLbb22LCHEJN",
 	"name": "0.12mm Fine @Creality Hi",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "BqQTYLbb22LCHEJN",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json
index 56e76e7a03..b871ea6cdb 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "g6zPlZ8mKj4YHC9l",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json
index 0d9c5f4f5b..b54cb6302f 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cAcjLnedHgi2zJ05",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
@@ -116,4 +114,4 @@
 	"xy_contour_compensation": "0",
 	"gcode_label_objects": "0",
 	"precise_outer_wall": "1"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json
index 00e10594e3..cf08bcd873 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "G93LbyixXNXBiA0c",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
@@ -115,4 +113,4 @@
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"gcode_label_objects": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json
index 0afe3367a5..fc5daba4ac 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "hfAhnivnymhUKkuS",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -31,7 +30,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.12",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json
index db05c36733..97da9d42d5 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "gHnRFCfQOiqEOQhq",
 	"name": "0.12mm Fine @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "gHnRFCfQOiqEOQhq",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "20",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -174,7 +172,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "1",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "80%",
diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json
index 23ee07ff02..dca59ca762 100644
--- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
index acdb2c2403..59fc3954db 100644
--- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "AgwKETM82R6PNW8u",
 	"name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "AgwKETM82R6PNW8u",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],  [1.0,1.5,80,5500],  [1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json
index dc2ded50f4..af11446856 100644
--- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.25",
 	"initial_layer_print_height": "0.1",
diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
index e04a25a2e7..997f874554 100644
--- a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json	
+++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "AhVlBBKSgNv8gtzF",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
index 91fa465acc..979f70e7a5 100644
--- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json	
+++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ZlLapzGj5AcZJW7n",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json
index cae991ff76..f731a0fbac 100644
--- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json	
+++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ysg14LXoki3gnanY",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json
index aeb29cee0a..f85c92a4e5 100644
--- a/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "cFlbPrdjMi4CLWZF",
 	"name": "0.16mm Fine @Creality Ender-3 V4 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "cFlbPrdjMi4CLWZF",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -263,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json
index 44e22d33e9..c5dc0794c6 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "hB2b43wb6zlKNwM7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"brim_object_gap": "0",
 	"brim_width": "0",
 	"default_acceleration": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json
index 77f4e754f6..9f69042388 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "KJS40SDSHBwiqODl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json
index 336e78ac1c..866a2c05d9 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "0MJLzTqNgW25Uheg",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json
index 1f1a708b4b..d3a63e4193 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "N8cFrOUSa1yfMrv0",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json
index b98f76289e..82c26510c7 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cjrvnlS7gkkm0pNy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
index 067aa42760..a0c88be82a 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QussxQZJlCnscRO8",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json
index a41f412f45..1664978e87 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cply3AO1zRZSsHgR",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json
index 9a42f54448..ac767b8490 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "11bH6lpigIvL8u8f",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json
index 0c74372dee..2a5050d2b7 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Fke1V31Lx19EoKIA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json
index 0ecee26eb0..329db47286 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "9fSweJ4F7gua7Uc7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json
index e2ab351bc7..4096165c24 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "DwpNJnb8eEz7L9Bb",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json
index c21dcdd143..ed65a2fb18 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "43mtG5xlkphvMKKd",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json
index c8f9692039..9425a012a8 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Jhb6GdIOKHntN1Ya",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json
index a90a14ce26..4dd044f031 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fxgj9J397IulykPl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
index 1adc7edee9..16ef9d5d29 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "O0dOiNS7TEZtCZ8R",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json
index 6ec52bb438..90151f2c75 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "eWDWBHYshBLl925f",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json
index dc0b13a54d..de800c7b94 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "HjQX9RTDFKq7QGtA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json
index 4dca077fd8..9030c8abe9 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "sFUH487ulcosG1Aj",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json
index 0b360bbdf5..95b568b104 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dDjBGlXptHbFRkZe",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
index dc75dd8a6b..42661ac38d 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "XL3fQRXNDiWlirhY",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json
index ee244e17c8..423c828055 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "aoBTpFYHhbpg1kuj",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json
index c3487fcff2..e361cd3784 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "2Nrbq8PxssUPBLza",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.16",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
index 3ae447f19b..ab29d7af18 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ujKrpcMbGeL1pnX6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json
index 9139a9ab80..63a173201c 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "eni3OChSXVGLB0NB",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.16",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json
index b7113edd45..9691a8e555 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "CSSjT637cJ1BSrDa",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json
index 052142f6ec..7970cd9ec4 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json	
@@ -6,7 +6,6 @@
 	"from": "system",
 	"setting_id": "jvnrh3jh6Btbs1Ja",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json
index 1bc4ed673f..5a8f264e9b 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "oFqTILkrvntT8uHM",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json
index 676751fa1e..a9e589bf62 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "kLTt1KBtPskehSHv",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
index 8912d61ace..837a2b1a56 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dIPbjfE0UjFaq6YU",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
index 704cd3756a..569e6c021f 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "A7RB0AQ0t1UkCN5G",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
index fb485bbf21..d59abbd109 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "qVu6mv4sVrVzWxvy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
index 45d61838d5..a5ce9a6b3a 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "03w4e0cMfUFjZcv6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
index 4669bff842..8e1c2e74f8 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cjGhLiKivneRnlNJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json
index 77b1295186..6f7f4a0154 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "NtD3nnUvAO8aSUDJ",
 	"name": "0.16mm Optimal @Creality Hi",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "NtD3nnUvAO8aSUDJ",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json
index d6caa5e775..7c9548b0f5 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "A0a8psWEQGdmYiPj",
 	"name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "A0a8psWEQGdmYiPj",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json
index a1896fa377..f3b0e35677 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "BQiQnQJpN2Yy4c7u",
 	"name": "0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "BQiQnQJpN2Yy4c7u",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json
index 087d90a584..bece32d26b 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "xHoh6Y8AfDzNA5Mf",
 	"name": "0.16mm Optimal @Creality K1 SE",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "xHoh6Y8AfDzNA5Mf",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,8 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json
index 62708a822a..07778ded42 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "ZhEEAnJ5eh6QES40",
 	"name": "0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "ZhEEAnJ5eh6QES40",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -263,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json
index 5deb17002e..c4952f98a6 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "i25lsWBmZF21XcdV",
 	"name": "0.16mm Optimal @Creality K1C",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "i25lsWBmZF21XcdV",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json
index 2365a82d31..3165987f20 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "CpdVjCmJkN3pWssv",
 	"name": "0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "CpdVjCmJkN3pWssv",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json
index 02507c806f..dd4772c4d0 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "IN9EjcbeLmwzyIrt",
 	"name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "IN9EjcbeLmwzyIrt",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json
index cda928b2e7..8c67647925 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "a76Q90iyWf1az7Fv",
 	"name": "0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "a76Q90iyWf1az7Fv",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json
index d8e00651f2..61d916d5ba 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "xcJYMZt1N40vmszc",
 	"name": "0.16mm Optimal @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "xcJYMZt1N40vmszc",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
index 1f9b68b300..e4337f090c 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Qh4PUdesKrjSUXFm",
 	"name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "Qh4PUdesKrjSUXFm",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json
index 80277008a0..df397e484f 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "FCUUtHpYIxeokc0a",
 	"name": "0.16mm Optimal @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "FCUUtHpYIxeokc0a",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json
index c23d00fba0..a5baecce55 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "8z63KIGeDgitLqPe",
 	"name": "0.16mm Optimal @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "8z63KIGeDgitLqPe",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "30",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -174,7 +172,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "2",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "100%",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json
index 1500b58edd..8a5cb6d850 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json	
@@ -34,7 +34,6 @@
 	"inner_wall_acceleration": "6000",
 	"inner_wall_line_width": "0.61",
 	"inner_wall_speed": "195",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.32",
 	"internal_solid_infill_speed": "195",
 	"ironing_flow": "10%",
diff --git a/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json
index 4511db51d8..e21d0b231a 100644
--- a/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "KopqA4S2dMBSCBSD",
 	"name": "0.16mm Standard @Creality K2 SE 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "KopqA4S2dMBSCBSD",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json
index c6aff2c46c..62262e67cc 100644
--- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
index 9111e8a395..84c61a1cf3 100644
--- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "3wVXi8pXkGNmKm53",
 	"name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "3wVXi8pXkGNmKm53",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json
index d2299f536e..ec97ecf362 100644
--- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json b/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json
index 40475733fd..6d1c733aaf 100644
--- a/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json	
+++ b/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "tkSkduU7S0ysAtM7",
 	"name": "0.1mm Standard @Creality Hi 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "tkSkduU7S0ysAtM7",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
diff --git a/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json
index 422e928cc0..422d65d29a 100644
--- a/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "UR1b2Z2o4t2uXsDO",
 	"name": "0.20mm High Quality @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "UR1b2Z2o4t2uXsDO",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
index 702fcf8ea8..dd416019bd 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ZShSFfwlxaYTLPyk",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json
index d540f01b05..c632f50d4e 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "SUpsCvktcGgKFOwG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json
index 2ed8c6707f..d9fb92fa07 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Mi0CWgKQO5QtCUgX",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json
index 36616153a4..62e00bd7c9 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ogY513sf2Ht92CNe",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json
index fe5cba1347..36c9f430d3 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "athOsWrvUS4bdchK",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
index 4a37e7aed6..339f526068 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pRsZ1fGFRb5LxTi6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json
index 8d5f34c010..6a21dbbb0f 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "oThS7cBtZl2ycbIR",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json
index d468da293f..17fc2be073 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "BDjZsZ3Eron3yC6o",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json
index b6d6703693..5f373ce662 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "V6277KGs62IwLGt2",
 	"name": "0.20mm Standard @Creality Ender-3 V4 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "V6277KGs62IwLGt2",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json
index c8decdadad..2e08e610f9 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json	
@@ -126,7 +126,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json
index 84722ac71c..f1cfbfe8f3 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "NUOwkxvz6bzH12be",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json
index 9e7ec845b1..b27666455f 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "aPYE2hHFn4jp6hHd",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json
index b24bac30e1..ee6e2ed895 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "iuwxYTfWfZ4RyZEg",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json
index e85725b2db..0a9358e108 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fhwVxG08WJloBcrL",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json
index 6912aaebab..0c2b09e737 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "V3Ik8iTHlZh5QNKm",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json
index 3e1b899446..b93111451e 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "g5sSMikMlHAPS2go",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json
index 9ddf750136..c190f844a8 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "vuh1vEUnXIvFGssp",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json
index 537fff135e..260cb03123 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "l6niLUptIm4MfRTB",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json
index 9abea8d074..dc1e84e791 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "XzSinPHka1JNcgdc",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
index c8e6b39c19..1c2f7de443 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "6n6QHp6IAmmgmTy7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json
index 9aba5bb71d..6d9ab2fe28 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "BmsBXICyG0DusAHS",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json
index 219119b0b9..cd152d2d75 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "FFWB7dkbWTGsR5a1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json
index 71fadd1ded..e97c038247 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Fo07KIkbZydVaBgi",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json
index 4ce194a79e..49582a273f 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "FiSvC283VqqMpr41",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
index 022e911acc..19346b5d19 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dPims9blQsZMrtnN",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
index 0e16e788ef..c20ff406ed 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pmPzGC04PU62qjcz",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json
index 89c4f56fa8..1862dc394d 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "bVXaGFQ7f2jkilWk",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json
index 0f5aae0bd6..1cf983d9bd 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "wG01ybBcp59pX5lB",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
index 4041987d50..f01fbe0a46 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "H198VcahxwpEdma0",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json
index 97892cc203..74a046068b 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "rG5BalEQ9WpjxWXr",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json
index cdd841907d..05e6f8075d 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "JrWxHTh4DZ7zRaog",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json
index a5ea94dfcc..12caa25379 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json	
@@ -6,7 +6,6 @@
 	"from": "system",
 	"setting_id": "YLkw9eyyK7cm97ek",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json
index 694492b626..52c9d083dc 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "8xefmMVdxxfX5MTl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json
index ec49bea8c6..f9776005d8 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "DLABbffpOkmSzZrG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
index 7d4eef8be2..efaba44268 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "8Ok1ykiLVdEftiJO",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
index 4de5bed1c6..a1ad472270 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "y5dNuwrcPQ1xUKOM",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json
index 3abc3478f3..4c9413c6e1 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jy8Ih6XxbX6mY2Z2",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
index 9dfdc2bc12..761c7164c8 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5x3ZLLMD1JScujiM",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
index 5546e8b916..fac00205d0 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lRpMOtyu8tTd4q5C",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
index 98e7815784..3ffeed2563 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "HWmFUQgTTKxAkHnA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json
index 5a5b6096a0..36e31c387e 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json	
@@ -187,8 +187,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
 	"prime_volume": "45",
@@ -266,4 +264,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "90",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json
index eaaeb4529f..0a1aa84ab7 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json	
@@ -182,8 +182,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "30",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -264,4 +262,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json
index 1a4bd4a3f3..1d3aaa5305 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "aBAXeSGAYu5QgS8m",
 	"name": "0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "aBAXeSGAYu5QgS8m",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json
index 19b01a9964..343dc08735 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json	
@@ -179,8 +179,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
 	"prime_volume": "45",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json
index b7365760f4..020d100487 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "RBEfIJsnl68JBPDc",
 	"name": "0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "RBEfIJsnl68JBPDc",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json
index aa8e7b440a..cc45207d21 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json	
@@ -182,8 +182,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -264,4 +262,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json
index 882703434d..d5f8e9f5a9 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "KXIWcAo9MAwFwT70",
 	"name": "0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "KXIWcAo9MAwFwT70",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json
index 51ada298d8..b49612f90d 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json	
@@ -182,8 +182,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "30",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -264,4 +262,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json
index 85dd6bbf3d..6a48c91240 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "x8wjQRt9jfXwd6cJ",
 	"name": "0.20mm Standard @Creality K1_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "x8wjQRt9jfXwd6cJ",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json
index ab4c3c4581..f0678f0fb0 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "4xypdknoIfLrsbrs",
 	"name": "0.20mm Standard @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "4xypdknoIfLrsbrs",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -270,6 +269,5 @@
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0",
-	"overhang_totally_speed": "25"
-}
\ No newline at end of file
+	"xy_hole_compensation": "0"
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
index 9faaa2515e..b3270bcfc1 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json	
@@ -172,8 +172,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"prime_tower_brim_width": "3",
 	"prime_volume": "45",
 	"print_flow_ratio": "1",
@@ -243,4 +241,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json
index d46a33f97e..7ef44f3d9a 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json	
@@ -180,8 +180,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
 	"prime_volume": "45",
@@ -266,4 +264,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json
index 39876b77dd..debcf747fb 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "eXLuYlHmWAomEpIp",
 	"name": "0.20mm Standard @Creality K2 SE 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "eXLuYlHmWAomEpIp",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json
index 11e1f6ed45..19e58926e3 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "VxY2jazB2Kn4930i",
 	"name": "0.20mm Standard @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "VxY2jazB2Kn4930i",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -176,7 +174,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\n0.2,0.4444;\n0.4,0.6145;\n0.6,0.7059;\n0.8,0.7619;\n1.5,0.8571;\n2,0.8889;\n3,0.9231;\n5,0.9520;\n10,1",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "2",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "100%",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json
index d06447035a..35a4cab279 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json	
@@ -34,7 +34,6 @@
 	"inner_wall_acceleration": "6000",
 	"inner_wall_line_width": "0.61",
 	"inner_wall_speed": "195",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.32",
 	"internal_solid_infill_speed": "195",
 	"ironing_flow": "10%",
diff --git a/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json
index e98933167c..68eb579518 100644
--- a/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "wApX9tYxw2iElGhq",
 	"name": "0.20mm Strength @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "wApX9tYxw2iElGhq",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
diff --git a/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json b/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json
index d84217d2ff..944efd7c84 100644
--- a/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json	
@@ -128,7 +128,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json
index 010b4aecbf..ee41e3758a 100644
--- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
index 0d11e5ac33..87c0158459 100644
--- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "fIlqMCEz5fbmGHKW",
 	"name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "fIlqMCEz5fbmGHKW",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json
index 4e6400fb7c..a7ac8696b2 100644
--- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
index 0b24f4d0b7..30dceb8779 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5RGkaM3sTHAC90DK",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json
index 5b1ef5fde1..995a5865a4 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "mEhTPVNyKIXwHM6R",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json
index 19d6768727..7d9b92f31e 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "qZkT2BU9Kg4n9tnF",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json
index 68257a4de4..6da20505ee 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "g0NQSWW3BZbgAMRl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json
index 0c9c307c6b..528033e0ff 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ZdimPQfRwZ0VDiZM",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json
index 494a97b4e4..65d672322e 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "JxRqFqk1obhdGIKZ",
 	"name": "0.24mm Draft @Creality Ender-3 V4 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "JxRqFqk1obhdGIKZ",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -263,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json
index 6f950b8905..321a209d41 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5bb8SQOestc8UdQe",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json
index 5458a1290e..a7eeb4b431 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "sP41jQScaMnkdanj",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json
index c2cffefbc8..0f72e86f78 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5z5F9heoZFK48zCY",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json
index 5b0b8ef11a..bb97f10bd8 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "61RvRyfbHgGvr6eQ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json
index 6dfcdc172a..ae13bbdc2e 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "nDVndS7HUxU2wT2D",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json
index f0e543f232..b75a5f183d 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jGm1nCGpwxxtCtvT",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json
index 80ee65edbd..435d40e856 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "2eTryig3fd51wgQ3",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json
index ad27324794..80677ecbe6 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "3Q7LIYMDI349jST9",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json
index 653d012433..40969e1d77 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ZLzHZO4Db6sjb1f1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json
index 231e7a82ff..2366b2862a 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "mxnyxP2RYe284OB7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json
index a55b4541b3..5889b22d33 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5sa2VFy1tjN907oW",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json
index e20cc6741e..2790d07d1b 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "MadcYvntjYi46IDu",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
index 5b8482f537..af0c60205c 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "u9TtIf0XBhnWrwND",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json
index 73c5f253ce..d7ad5c5844 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "De7wK4KBVZ2BzRx5",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json
index c4669560cf..67dd47f057 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "O0jM8sqvBLR5aNfE",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
index f4374f84d0..7e6bde3e85 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7ZtffBsXW6wPWj7k",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json
index 0c781beb53..de48c92b5a 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lH3j14miQE62zlSj",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -34,7 +33,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json
index 93a2507428..27b156c5d7 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "0SJNhii84pYiz380",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json
index beefae6aa5..94e6d6d0f6 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json	
@@ -6,7 +6,6 @@
 	"from": "system",
 	"setting_id": "Hg10EUNCLMEYYBN1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json
index 17015f12de..a40edcd2e2 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "6F8olUrpFz6cSOfX",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json
index f0c9c02f7e..d5970f77bc 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "L6Qdsyt0yW2TCRyk",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json
index 0d210f5c9f..389f793d31 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "k1Qi7hPIAi1qp7cA",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json
index 1fce19f64e..1cc8cfed58 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "csR8yY0OEnt7SU6T",
 	"name": "0.24mm Draft @Creality Hi",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "csR8yY0OEnt7SU6T",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json
index ce0abbf5ac..1c72943250 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "NGQAnSKnUVHcq0sR",
 	"name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "NGQAnSKnUVHcq0sR",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json
index afd921a54b..a4bde680d7 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Lxyn5qXHZh4GIGS1",
 	"name": "0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "Lxyn5qXHZh4GIGS1",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json
index 34a577c896..53e2e515f4 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "KJc1HuWgcYJkoy32",
 	"name": "0.24mm Draft @Creality K1 SE",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "KJc1HuWgcYJkoy32",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,8 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json
index 3522e46d5a..dd17499dfd 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "dPPC73WnlF20wbsm",
 	"name": "0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "dPPC73WnlF20wbsm",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -263,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json
index 697593d8c4..685f7fb7a3 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "POMxfD8I0LnZO9CB",
 	"name": "0.24mm Draft @Creality K1C",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "POMxfD8I0LnZO9CB",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json
index b3bf816290..c081aa886a 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "wGXybdgPzFWozZLw",
 	"name": "0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "wGXybdgPzFWozZLw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json
index 9f886804e3..eeccdcc58e 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "rIeugRR6BYXplcpT",
 	"name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "rIeugRR6BYXplcpT",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json
index 16ebf21b9a..28c0573cff 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "vGw6lrXZLHRNpR6r",
 	"name": "0.24mm Draft @Creality K1_CFS-C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "vGw6lrXZLHRNpR6r",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,7 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "0",
 	"prime_tower_enhance_type": "chamfer",
@@ -265,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json
index cb761dd7cd..263a8b2c80 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "G1PKSuPoCcbIA7Yh",
 	"name": "0.24mm Draft @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "G1PKSuPoCcbIA7Yh",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
index 4676faab10..ab8447edf4 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "sPONNeyRg4CxHD1r",
 	"name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "sPONNeyRg4CxHD1r",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json
index 7c1f71451e..51e23a19c6 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "7V16er03IuXDpO4U",
 	"name": "0.24mm Draft @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "7V16er03IuXDpO4U",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json
index f8c9f5dea6..caf35701c4 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "1E0byJ2cjuoubstC",
 	"name": "0.24mm Draft @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "1E0byJ2cjuoubstC",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "30",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -174,7 +172,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "6",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "100%",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json
index 5d8dd67e1f..478422242f 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "s3qAAYV2gY2x4rrB",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -31,7 +30,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json
index 1d9da9088e..ffe2624415 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "w5MuLpLSpMMuLXwf",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -31,7 +30,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json
index edb3f7e2db..c4f3b2f024 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7uxCpPqUS9Lz1TK8",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -33,7 +32,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json
index 3af9088dcd..f8e4b74c0c 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "GDs3Z2oIlW5O1tCx",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json
index 9e582fad28..1595bb641e 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "eF3su8pOiDbEHiOy",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json
index cf81e4557b..95dc5074d5 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "IZxO4Gmrh0sqyiC8",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.24",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json
index d57ff66332..cf188dace1 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
index 7cefcf50f9..0cb962d8f0 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "rFcFwPDRfrVVWCmp",
 	"name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "rFcFwPDRfrVVWCmp",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json
index 8a246c2245..4255d84839 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json
index ab6b0843f4..ae766b65ff 100644
--- a/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "7DN0tghSeRVYQcde",
 	"name": "0.24mm Standard @Creality K2 SE 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "7DN0tghSeRVYQcde",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json
index b67ba120ee..0a403950b9 100644
--- a/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json	
+++ b/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json	
@@ -34,7 +34,6 @@
 	"inner_wall_acceleration": "6000",
 	"inner_wall_line_width": "0.61",
 	"inner_wall_speed": "195",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.32",
 	"internal_solid_infill_speed": "195",
 	"ironing_flow": "10%",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json
index fcd0453ca2..c3f66146d0 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "nuR9SZ4PCShEC1Cw",
 	"name": "0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "nuR9SZ4PCShEC1Cw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -263,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json
index 4ca758ed55..4c2962dd26 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "aQmsfZyAfVbBZ9Lh",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json
index 79a99fa000..9eba8aff2a 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "oFne48238nyyTRRV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json
index 9b6cbd3e33..6ac861cab4 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1ByZYdK7bEtBcJGG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json
index 59bd2ac292..3ae69265a6 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "3uR1DRElzIYQ9TDK",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json
index 700148dc36..ee377bed8a 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "OWrIrHWU7qzlQyqs",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json
index 5a871b4730..ce72fbf16b 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "yMRcZG70S3Vgb3Qh",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json
index 2693520fa5..6231185dad 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "N90MCWu17jFkXr2H",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json
index 992fc85d7e..364fab8fa5 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jFWnCrXEW5bNSLzq",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json
index a416d5e082..a7f11d9c78 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "XLp864DPRIWcjHvv",
 	"name": "0.28mm SuperDraft @Creality Hi 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "XLp864DPRIWcjHvv",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
@@ -264,4 +262,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json
index 5686279f27..f6589c4826 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "ELCUvdTCSg4N4HVC",
 	"name": "0.28mm SuperDraft @Creality K2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "ELCUvdTCSg4N4HVC",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
index 3b2f7e5cc1..2311278057 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "lFZeFNWUsNRW3bvN",
 	"name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "lFZeFNWUsNRW3bvN",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "50",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json
index 39760a5c12..6d7f955897 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "KO1MgETYTo42CfhQ",
 	"name": "0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "KO1MgETYTo42CfhQ",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -131,8 +131,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -266,4 +264,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json
index e0538e6868..142f71e8bb 100644
--- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "ruhDJCxvTN1nB60Z",
 	"name": "0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "ruhDJCxvTN1nB60Z",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "30",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -174,7 +172,6 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
-	"smooth_coefficient": "6",
 	"smooth_speed_discontinuity_area": "1",
 	"solid_infill_filament": "1",
 	"sparse_infill_acceleration": "100%",
diff --git a/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json
index b3499fa406..32a280fd55 100644
--- a/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "bG25lTbxHzhcGGQg",
 	"name": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "bG25lTbxHzhcGGQg",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -128,7 +128,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json
index 248cfee870..75bd7bb2e1 100644
--- a/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "7i9DCEZHvxgrYciY",
 	"name": "0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "7i9DCEZHvxgrYciY",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "25%",
 	"acceleration_limit_mess_enable": "0",
@@ -130,7 +130,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json
index 14950f486e..f13e0672f3 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "eoPcs8fDihwCYFUB",
 	"name": "0.30mm Standard @Creality Ender-5 Max 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "eoPcs8fDihwCYFUB",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -128,7 +128,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json
index 92a4a8fc48..87930f8456 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "KZjGEI0aqppw5c55",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json
index f1f3d5ce1a..9d192b3877 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "MX5VSmoPcOiBESP3",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json
index a0bce0af8a..d77680e241 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json	
@@ -185,7 +185,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
 	"prime_volume": "45",
@@ -263,4 +262,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "90",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json
index a4bd5b2abc..9370ba6586 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json	
@@ -181,8 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -262,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json
index d4073f4221..29e07b4305 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "qd4AsuXVsp5pvPg4",
 	"name": "0.30mm Standard @Creality K1 SE 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "qd4AsuXVsp5pvPg4",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -128,8 +128,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json
index 3f86d9e613..e8dbe2f076 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json	
@@ -181,8 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -262,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json
index 54ac0870a4..07539ae51a 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json	
@@ -181,8 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "15",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -262,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json
index 71facd89ff..fa678432b0 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "nRmO47B1VhqIi2KU",
 	"name": "0.30mm Standard @Creality K2 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "nRmO47B1VhqIi2KU",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess_enable": "0",
@@ -123,7 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -254,7 +253,6 @@
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
 	"min_length_factor": "0.5",
-	"overhang_totally_speed": "25",
 	"prime_tower_enhance_type": "chamfer",
 	"print_order": "default",
 	"scarf_angle_threshold": "155",
@@ -272,4 +270,4 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"speed_limit_to_height": "[[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]",
 	"wall_direction": "auto"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
index 216d964e6e..b414b50315 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json	
@@ -171,8 +171,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"prime_tower_brim_width": "3",
 	"prime_volume": "45",
 	"print_flow_ratio": "1",
@@ -241,4 +239,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json
index 2bf82bc989..677f36d515 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json	
@@ -180,8 +180,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
 	"prime_volume": "45",
@@ -266,4 +264,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json
index 4da92d3732..b0ff7dc5aa 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "obWYPAVrLuKr93Xe",
 	"name": "0.30mm Standard @Creality SPARKX i7 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "obWYPAVrLuKr93Xe",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json
index c9a7069a2a..8af2bedd6f 100644
--- a/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "h9vwxtNQGvgHVldi",
 	"name": "0.30mm Strength @Creality K2 Plus 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "h9vwxtNQGvgHVldi",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json
index 24fedd0965..3f0410b08f 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Rc7DUtP8slk0zORl",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.32",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json
index 2823947840..ba7e74b9a4 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "8Yz1tYKgOhlRhEFw",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.32",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json
index 40f87281de..2f03446779 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "yDUagPaIFkVkQ7aL",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.32",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json
index e376b9dfe3..cd7aaf30b1 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
index ca58516410..969f802a02 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "wUXKe2HJBnrZhwCJ",
 	"name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "wUXKe2HJBnrZhwCJ",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],  [1.0,1.5,80,5500],  [1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json
index 0308bb49f6..d0566f4bc1 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json
index f12fb8b016..1886dd1561 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "5L1oQB22HBdoaocC",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json
index 7a1a3c401d..b3e49730a3 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "r3dweAtprgzF0jON",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json
index 0ada896430..929f9951eb 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lD86ZxmhqaFLOXs7",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -33,7 +32,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json
index d3de4eb889..002d380f9f 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "XCDNFQBF7Kx54Z2Y",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json
index 86e132abb4..620d9cc2df 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "3yO02rZelrUrGct2",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json
index 69d90fbef6..d4f253fa0c 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "OzKdcW8QjYz9Ekfg",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.36",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json
index da7ca48be3..5e4b57e685 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
index 8edd6e869f..81191f9511 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "psLMoG691hQ5PSrK",
 	"name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "psLMoG691hQ5PSrK",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -241,4 +239,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json
index 955f1332ed..55a9d77ea2 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json
index 15943f5c2c..c51f64becf 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "7HQvsdltfdC8N5Hw",
 	"name": "0.40mm Standard @Creality Ender-5 Max 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "7HQvsdltfdC8N5Hw",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess_enable": "0",
@@ -128,7 +128,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json
index aa0efb8f49..5f625055bc 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "1xCIS6DBlkVcCLSf",
 	"name": "0.40mm Standard @Creality Hi 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "1xCIS6DBlkVcCLSf",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -129,7 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "cone",
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json
index 2de391b8ad..ba5420a888 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json	
@@ -181,7 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -261,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json
index 88bc46add2..4d73fdaa0c 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json	
@@ -181,7 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json
index 5cd1a9cb6a..e8b1548947 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json	
@@ -181,7 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -261,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json
index c1c968cbb6..e245d5acd2 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json	
@@ -181,7 +181,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
@@ -261,4 +260,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json
index b084f1cf47..00160429ce 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "mvjFUBLuSrZ1fm1e",
 	"name": "0.40mm Standard @Creality K2 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "mvjFUBLuSrZ1fm1e",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100",
 	"acceleration_limit_mess_enable": "0",
@@ -123,7 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "40",
@@ -254,7 +253,6 @@
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
 	"min_length_factor": "0.5",
-	"overhang_totally_speed": "20",
 	"prime_tower_enhance_type": "chamfer",
 	"print_order": "default",
 	"scarf_angle_threshold": "155",
@@ -272,4 +270,4 @@
 	"small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
 	"speed_limit_to_height": "[[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]",
 	"wall_direction": "auto"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json
index 3baf52acf5..4452d1a7bb 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json	
@@ -171,8 +171,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"prime_tower_brim_width": "3",
 	"prime_volume": "45",
 	"print_flow_ratio": "1",
@@ -241,4 +239,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json
index df23b1f46c..64c18db3e6 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json	
@@ -180,8 +180,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "20",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
 	"prime_volume": "45",
@@ -266,4 +264,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json
index 13c3d5986f..675dabd694 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "auHhZ5g7PonLi942",
 	"name": "0.40mm Standard @Creality SPARKX i7 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "auHhZ5g7PonLi942",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"acceleration_limit_mess": "[[1,1.2,150,5000]]",
@@ -129,8 +129,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "20",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_enhance_type": "chamfer",
diff --git a/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json
index c164cd88d4..aabb6ed9b2 100644
--- a/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "DPs3K2D8t8dGscqK",
 	"name": "0.40mm Strength @Creality K2 Plus 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "DPs3K2D8t8dGscqK",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess_enable": "0",
@@ -123,8 +123,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json
index d732c7015c..d131d479a0 100644
--- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json
index d3076515c9..836a7a1bac 100644
--- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "kaJFaxUX6gSqC3Y7",
 	"name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "kaJFaxUX6gSqC3Y7",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json
index 78bd43a0d9..d4ef78cc34 100644
--- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json
index 3fa885318e..6c008ce9e1 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "VMUL5DemqZSKkMEJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.48",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json
index 600550ddc5..d7192ac77c 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json	
@@ -6,7 +6,6 @@
 	"from": "system",
 	"setting_id": "qaiff3f8gSQ1GVj1",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -31,7 +30,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.48",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json
index 6041d4c030..70a73e2f58 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dIWKOSX80OJ6ixTT",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -30,7 +29,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.7",
 	"initial_layer_print_height": "0.48",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json
index b3508aab5c..6ce76e1469 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json
index 97da7fe92e..afb293a330 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "s3FIq2ua0ODDqxtm",
 	"name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "s3FIq2ua0ODDqxtm",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json
index 0cd49b9a89..ac12558c55 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json
index 5f97213187..f10bb8ddfb 100644
--- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json
index 8113cadf74..17fdbca6e3 100644
--- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "OUVOMZEwJDilvXiO",
 	"name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_creality_common",
+	"from": "system",
+	"setting_id": "OUVOMZEwJDilvXiO",
+	"instantiation": "true",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "100%",
 	"acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]",
@@ -124,8 +124,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"overhang_totally_speed": "25",
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
 	"prime_tower_width": "60",
@@ -243,4 +241,4 @@
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
 	"xy_contour_compensation": "0",
 	"xy_hole_compensation": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json
index 3b12ac6944..db588cb657 100644
--- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json	
@@ -31,7 +31,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.82",
 	"initial_layer_print_height": "0.4",
diff --git a/resources/profiles/Creality/process/fdm_process_common.json b/resources/profiles/Creality/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Creality/process/fdm_process_common.json
+++ b/resources/profiles/Creality/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Creality/process/fdm_process_creality_common.json b/resources/profiles/Creality/process/fdm_process_creality_common.json
index 7ec48d4800..2fccc865d8 100644
--- a/resources/profiles/Creality/process/fdm_process_creality_common.json
+++ b/resources/profiles/Creality/process/fdm_process_creality_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Cubicon.json b/resources/profiles/Cubicon.json
index ffb363c807..f70517a0b1 100644
--- a/resources/profiles/Cubicon.json
+++ b/resources/profiles/Cubicon.json
@@ -1,6 +1,6 @@
 {
 	"name": "Cubicon",
-	"version": "02.04.00.04",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Cubicon configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json
index 2844a543a4..60ab5eac11 100644
--- a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json	
+++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json	
@@ -213,7 +213,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json
index 85bd7be03f..8020cac27e 100644
--- a/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json	
+++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json	
@@ -213,7 +213,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json
index 9c38452bf5..398f4e3457 100644
--- a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json	
+++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json	
@@ -213,7 +213,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Cubicon/machine/fdm_machine_common.json b/resources/profiles/Cubicon/machine/fdm_machine_common.json
index 1264456731..2654ef5927 100644
--- a/resources/profiles/Cubicon/machine/fdm_machine_common.json
+++ b/resources/profiles/Cubicon/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"support_air_filtration": "0",
 	"machine_max_acceleration_e": [
diff --git a/resources/profiles/Cubicon/process/fdm_process_common.json b/resources/profiles/Cubicon/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Cubicon/process/fdm_process_common.json
+++ b/resources/profiles/Cubicon/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Cubicon/process/process template @base.json b/resources/profiles/Cubicon/process/process template @base.json
index 74ddfa11d6..073bf4ea23 100644
--- a/resources/profiles/Cubicon/process/process template @base.json	
+++ b/resources/profiles/Cubicon/process/process template @base.json	
@@ -147,7 +147,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json
index a8cef36ca5..aceecc557a 100644
--- a/resources/profiles/Custom.json
+++ b/resources/profiles/Custom.json
@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.04",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json
index bf48e0488b..615d3aafa4 100644
--- a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json
index ad26608bff..cef361767f 100644
--- a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json
index d710282360..f8a3f9d4ff 100644
--- a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json
index 481fd04152..3db93c2e10 100644
--- a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json
index 9aec5f168f..8fbc18b513 100644
--- a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json
index 685482342e..faba4cf7cb 100644
--- a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json
index 0913752501..5f20b83ec5 100644
--- a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json
index 6e17b6e4c0..ccfc71ebb7 100644
--- a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json
index a70aeffe29..67a46e0129 100644
--- a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json	
+++ b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json	
@@ -15,9 +15,6 @@
 	"filament_cooling_moves": [
 		"2"
 	],
-	"filament_load_time": [
-		"10.5"
-	],
 	"filament_loading_speed": [
 		"10"
 	],
@@ -30,9 +27,6 @@
 	"filament_stamping_loading_speed": [
 		"29"
 	],
-	"filament_unload_time": [
-		"8.5"
-	],
 	"filament_unloading_speed": [
 		"100"
 	],
diff --git a/resources/profiles/Custom/machine/fdm_klipper_common.json b/resources/profiles/Custom/machine/fdm_klipper_common.json
index a0ee0f1a47..0080d0ebb0 100644
--- a/resources/profiles/Custom/machine/fdm_klipper_common.json
+++ b/resources/profiles/Custom/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Slope Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Custom/machine/fdm_machine_common.json b/resources/profiles/Custom/machine/fdm_machine_common.json
index 963f39c9d8..bf8f2249cf 100644
--- a/resources/profiles/Custom/machine/fdm_machine_common.json
+++ b/resources/profiles/Custom/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Custom/machine/fdm_repetier_common.json b/resources/profiles/Custom/machine/fdm_repetier_common.json
index b36b716e4e..27b4dd7741 100644
--- a/resources/profiles/Custom/machine/fdm_repetier_common.json
+++ b/resources/profiles/Custom/machine/fdm_repetier_common.json
@@ -119,7 +119,6 @@
 		"30"
 	],
 	"z_hop_types": "Slope Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
@@ -140,4 +139,4 @@
 	"scan_first_layer": "0",
 	"nozzle_type": "undefine",
 	"auxiliary_fan": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Custom/machine/fdm_rrf_common.json b/resources/profiles/Custom/machine/fdm_rrf_common.json
index 2fc9df9a3d..e9a1301622 100644
--- a/resources/profiles/Custom/machine/fdm_rrf_common.json
+++ b/resources/profiles/Custom/machine/fdm_rrf_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Slope Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Custom/process/fdm_process_common.json b/resources/profiles/Custom/process/fdm_process_common.json
index b8e882770a..0d558129af 100644
--- a/resources/profiles/Custom/process/fdm_process_common.json
+++ b/resources/profiles/Custom/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -83,7 +82,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Custom/process/fdm_process_marlin_common.json b/resources/profiles/Custom/process/fdm_process_marlin_common.json
index 6b1b1434a7..5f5c10f173 100644
--- a/resources/profiles/Custom/process/fdm_process_marlin_common.json
+++ b/resources/profiles/Custom/process/fdm_process_marlin_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Custom/process/fdm_process_repetier_common.json b/resources/profiles/Custom/process/fdm_process_repetier_common.json
index 3a9bc23306..66df7ad018 100644
--- a/resources/profiles/Custom/process/fdm_process_repetier_common.json
+++ b/resources/profiles/Custom/process/fdm_process_repetier_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -105,4 +104,4 @@
 	"compatible_printers": [
 		"MyRepetier 0.4 nozzle"
 	]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Custom/process/fdm_process_rrf_common.json b/resources/profiles/Custom/process/fdm_process_rrf_common.json
index e22df25aab..469ca6ecfd 100644
--- a/resources/profiles/Custom/process/fdm_process_rrf_common.json
+++ b/resources/profiles/Custom/process/fdm_process_rrf_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/DeltaMaker.json b/resources/profiles/DeltaMaker.json
index c7209bdf2b..6ef943d248 100755
--- a/resources/profiles/DeltaMaker.json
+++ b/resources/profiles/DeltaMaker.json
@@ -1,7 +1,7 @@
 {
 	"name": "DeltaMaker",
 	"url": "",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "DeltaMaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
index ecfe431ef6..653ec60927 100755
--- a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
+++ b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "1",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/DeltaMaker/machine/fdm_machine_common.json b/resources/profiles/DeltaMaker/machine/fdm_machine_common.json
index 12c0e7d104..7e49364d76 100755
--- a/resources/profiles/DeltaMaker/machine/fdm_machine_common.json
+++ b/resources/profiles/DeltaMaker/machine/fdm_machine_common.json
@@ -11,7 +11,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "1",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -102,7 +101,6 @@
 	],
 	"single_extruder_multi_material": "0",
 	"change_filament_gcode": "",
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"nozzle_type": "undefine",
 	"auxiliary_fan": "0",
diff --git a/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json b/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json
index a5a64bfede..3587ef7e7d 100755
--- a/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json	
+++ b/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "CPkjzrLXDcdnT5u1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"layer_height": "0.25",
 	"bottom_shell_layers": "3",
 	"bridge_speed": "60",
diff --git a/resources/profiles/DeltaMaker/process/fdm_process_common.json b/resources/profiles/DeltaMaker/process/fdm_process_common.json
index 80c74007f0..09d47aab9d 100755
--- a/resources/profiles/DeltaMaker/process/fdm_process_common.json
+++ b/resources/profiles/DeltaMaker/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "20.0",
 	"bottom_surface_pattern": "monotonic",
@@ -82,7 +81,6 @@
 	"support_object_xy_distance": "0.8",
 	"tree_support_branch_angle": "45",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Dremel.json b/resources/profiles/Dremel.json
index 71f13d0dc8..3d804f6a1b 100644
--- a/resources/profiles/Dremel.json
+++ b/resources/profiles/Dremel.json
@@ -1,6 +1,6 @@
 {
 	"name": "Dremel",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Dremel configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Dremel/machine/fdm_dremel_common.json b/resources/profiles/Dremel/machine/fdm_dremel_common.json
index 0dae7eb9ea..d032e63646 100644
--- a/resources/profiles/Dremel/machine/fdm_dremel_common.json
+++ b/resources/profiles/Dremel/machine/fdm_dremel_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/Dremel/machine/fdm_machine_common.json b/resources/profiles/Dremel/machine/fdm_machine_common.json
index 1264456731..2654ef5927 100644
--- a/resources/profiles/Dremel/machine/fdm_machine_common.json
+++ b/resources/profiles/Dremel/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"support_air_filtration": "0",
 	"machine_max_acceleration_e": [
diff --git a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json
index 6b97a85444..377d1a67a7 100644
--- a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json	
+++ b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "9KpA5yblUW2rVLZY",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "40",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json
index 734b6e5c69..1b4090e8fc 100644
--- a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json	
+++ b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "wSAun08YCT9u9pOY",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "40",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json
index 716b2ca2dc..b757aa1bb0 100644
--- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json	
+++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "n2k8VXfPE45lzxmq",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "5000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "45",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json
index 6089ca8f5b..b2a12da6ab 100644
--- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json	
+++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1dgGvgPtncRPdWVX",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json
index ad07216741..e48ad6212f 100644
--- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json	
+++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "DXivoqKpf6E0edQV",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "40",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json
index 358fef4448..06ffde36b7 100644
--- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json	
+++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1EacU2rT7gdsnkP4",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "5000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json
index 4c083240de..ac92266b97 100644
--- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json	
+++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "iraCyWuqWZ9D0Zw1",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json
index a974c3097b..7ff03cb876 100644
--- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json	
+++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "DU8Yd6C1GF2uIuNF",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "50",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json
index 5d16155453..601268bac0 100644
--- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json	
+++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "iX1Z2gHIGCWuZAJC",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "5000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json
index 27175afdf2..19719d7008 100644
--- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json	
+++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "N3x1hdUv74ecskhv",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json
index ca224bf687..24be67d78e 100644
--- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json	
+++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "O6ulsZPXdb1dpOTB",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.4",
 	"internal_solid_infill_speed": "50",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json
index 8db1965a59..eca0dfe6ff 100644
--- a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json	
+++ b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "WMm4Yxia1QjZCK3h",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "60",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json
index d7a6db964e..3801591ebc 100644
--- a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json	
+++ b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "verN5otUrqpeDtY4",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50",
 	"brim_width": "5",
@@ -30,7 +29,6 @@
 	"inner_wall_acceleration": "2000",
 	"internal_solid_infill_line_width": "0.56",
 	"internal_solid_infill_speed": "50",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "2000",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Dremel/process/fdm_process_common.json b/resources/profiles/Dremel/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Dremel/process/fdm_process_common.json
+++ b/resources/profiles/Dremel/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Dremel/process/fdm_process_dremel_common.json b/resources/profiles/Dremel/process/fdm_process_dremel_common.json
index b68c7230b3..92358dc814 100644
--- a/resources/profiles/Dremel/process/fdm_process_dremel_common.json
+++ b/resources/profiles/Dremel/process/fdm_process_dremel_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json
index f85e19bb76..b2e2c21f14 100644
--- a/resources/profiles/Elegoo.json
+++ b/resources/profiles/Elegoo.json
@@ -1,2546 +1,2546 @@
 {
-    "name": "Elegoo",
-    "version": "02.04.00.07",
-    "force_update": "0",
-    "description": "Elegoo configurations",
-    "machine_model_list": [
-        {
-            "name": "Elegoo Centauri Carbon 2",
-            "sub_path": "machine/ECC2/Elegoo Centauri Carbon 2.json"
-        },
-        {
-            "name": "Elegoo Centauri 2",
-            "sub_path": "machine/EC2/Elegoo Centauri 2.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon",
-            "sub_path": "machine/ECC/Elegoo Centauri Carbon.json"
-        },
-        {
-            "name": "Elegoo Centauri",
-            "sub_path": "machine/EC/Elegoo Centauri.json"
-        },
-        {
-            "name": "Elegoo OrangeStorm Giga",
-            "sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro.json"
-        },
-        {
-            "name": "Elegoo Neptune 4",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro.json"
-        },
-        {
-            "name": "Elegoo Neptune 3",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 3.json"
-        },
-        {
-            "name": "Elegoo Neptune X",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune X.json"
-        },
-        {
-            "name": "Elegoo Neptune 2S",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2S.json"
-        },
-        {
-            "name": "Elegoo Neptune 2D",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2D.json"
-        },
-        {
-            "name": "Elegoo Neptune 2",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2.json"
-        },
-        {
-            "name": "Elegoo Neptune",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune.json"
-        }
-    ],
-    "process_list": [
-        {
-            "name": "fdm_process_common",
-            "sub_path": "process/fdm_process_common.json"
-        },
-        {
-            "name": "fdm_process_elegoo_common",
-            "sub_path": "process/fdm_process_elegoo_common.json"
-        },
-        {
-            "name": "fdm_process_elegoo_02010",
-            "sub_path": "process/fdm_process_elegoo_02010.json"
-        },
-        {
-            "name": "fdm_process_elegoo_04020",
-            "sub_path": "process/fdm_process_elegoo_04020.json"
-        },
-        {
-            "name": "fdm_process_elegoo_06030",
-            "sub_path": "process/fdm_process_elegoo_06030.json"
-        },
-        {
-            "name": "fdm_process_elegoo_08040",
-            "sub_path": "process/fdm_process_elegoo_08040.json"
-        },
-        {
-            "name": "fdm_process_elegoo_10050",
-            "sub_path": "process/fdm_process_elegoo_10050.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.20mm Standard @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.20mm Standard @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
-            "sub_path": "process/ECC2/0.10mm Standard @Elegoo CC2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo C2 0.2 nozzle",
-            "sub_path": "process/EC2/0.10mm Standard @Elegoo C2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.30mm Standard @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.30mm Standard @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
-            "sub_path": "process/ECC2/0.40mm Standard @Elegoo CC2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo C2 0.8 nozzle",
-            "sub_path": "process/EC2/0.40mm Standard @Elegoo C2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo CC2 0.8 nozzle",
-            "sub_path": "process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo C2 0.8 nozzle",
-            "sub_path": "process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo CC2 0.8 nozzle",
-            "sub_path": "process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo C2 0.8 nozzle",
-            "sub_path": "process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.30mm Strength @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.30mm Strength @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo CC2 0.8 nozzle",
-            "sub_path": "process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo C2 0.8 nozzle",
-            "sub_path": "process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.18mm Fine @Elegoo CC2 0.6 nozzle",
-            "sub_path": "process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.18mm Fine @Elegoo C2 0.6 nozzle",
-            "sub_path": "process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Extra Fine @Elegoo CC2 0.8 nozzle",
-            "sub_path": "process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.16mm Extra Fine @Elegoo C2 0.8 nozzle",
-            "sub_path": "process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json"
-        },
-        {
-            "name": "0.14mm Extra Draft @Elegoo CC2 0.2 nozzle",
-            "sub_path": "process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.14mm Extra Draft @Elegoo C2 0.2 nozzle",
-            "sub_path": "process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo CC2 0.4 nozzle",
-            "sub_path": "process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo C2 0.4 nozzle",
-            "sub_path": "process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo CC2 0.2 nozzle",
-            "sub_path": "process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo C2 0.2 nozzle",
-            "sub_path": "process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo CC2 0.2 nozzle",
-            "sub_path": "process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo C2 0.2 nozzle",
-            "sub_path": "process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.20mm Standard @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo CC 0.2 nozzle",
-            "sub_path": "process/ECC/0.10mm Standard @Elegoo CC 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.30mm Standard @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo CC 0.8 nozzle",
-            "sub_path": "process/ECC/0.40mm Standard @Elegoo CC 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo CC 0.8 nozzle",
-            "sub_path": "process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo CC 0.8 nozzle",
-            "sub_path": "process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json"
-        },
-        {
-            "name": "0.30mm Strength @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo CC 0.8 nozzle",
-            "sub_path": "process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.18mm Fine @Elegoo CC 0.6 nozzle",
-            "sub_path": "process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Extra Fine @Elegoo CC 0.8 nozzle",
-            "sub_path": "process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json"
-        },
-        {
-            "name": "0.14mm Extra Draft @Elegoo CC 0.2 nozzle",
-            "sub_path": "process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo CC 0.4 nozzle",
-            "sub_path": "process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo CC 0.2 nozzle",
-            "sub_path": "process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo CC 0.2 nozzle",
-            "sub_path": "process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.20mm Standard @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo C 0.2 nozzle",
-            "sub_path": "process/EC/0.10mm Standard @Elegoo C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.30mm Standard @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo C 0.8 nozzle",
-            "sub_path": "process/EC/0.40mm Standard @Elegoo C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo C 0.8 nozzle",
-            "sub_path": "process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo C 0.8 nozzle",
-            "sub_path": "process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.30mm Strength @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo C 0.8 nozzle",
-            "sub_path": "process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.18mm Fine @Elegoo C 0.6 nozzle",
-            "sub_path": "process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle",
-            "sub_path": "process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle",
-            "sub_path": "process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo C 0.4 nozzle",
-            "sub_path": "process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo C 0.2 nozzle",
-            "sub_path": "process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo C 0.2 nozzle",
-            "sub_path": "process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N4 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N4 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N4 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N4 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N4 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N4 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N4 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N4 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N4 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N4 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N4 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N4 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N4 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N4 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N4 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N4 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N4Pro 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N4Pro 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N4Pro 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N4Pro 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N4Pro 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N4Pro 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N4Pro 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N4Pro 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N4Pro 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N4Pro 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N4Plus 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N4Plus 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N4Plus 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N4Plus 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N4Plus 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N4Plus 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N4Plus 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N4Plus 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N4Plus 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N4Plus 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle",
-            "sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N4Max 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N4Max 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N4Max 0.2 nozzle",
-            "sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N4Max 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N4Max 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N4Max 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle",
-            "sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N4Max 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N4Max 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N4Max 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N4Max 0.8 nozzle",
-            "sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N4Max 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N4Max 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N4Max 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N4Max 1.0 nozzle",
-            "sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N3Pro 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N3Pro 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N3Pro 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N3Pro 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N3Pro 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N3Pro 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N3Pro 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N3Pro 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N3Pro 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N3Pro 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N3Pro 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N3Plus 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N3Plus 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N3Plus 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N3Plus 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N3Plus 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N3Plus 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N3Plus 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N3Plus 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N3Plus 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N3Plus 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N3Plus 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle",
-            "sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @Elegoo N3Max 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Optimal @Elegoo N3Max 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Draft @Elegoo N3Max 0.2 nozzle",
-            "sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo N3Max 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo N3Max 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo N3Max 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle",
-            "sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo N3Max 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo N3Max 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo N3Max 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo N3Max 0.8 nozzle",
-            "sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo N3Max 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo N3Max 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo N3Max 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo N3Max 1.0 nozzle",
-            "sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.12mm Fine @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle",
-            "sub_path": "process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
-            "sub_path": "process/EN2SERIES/0.30mm Standard @Elegoo Neptune 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo Neptune 0.6 nozzle",
-            "sub_path": "process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo Neptune 0.6 nozzle",
-            "sub_path": "process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle",
-            "sub_path": "process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
-            "sub_path": "process/EN2SERIES/0.40mm Standard @Elegoo Neptune 0.8 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo Neptune 0.8 nozzle",
-            "sub_path": "process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo Neptune 0.8 nozzle",
-            "sub_path": "process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
-            "sub_path": "process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
-            "sub_path": "process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
-            "sub_path": "process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json"
-        },
-        {
-            "name": "0.20mm Strength @Elegoo Giga 0.4 nozzle",
-            "sub_path": "process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle",
-            "sub_path": "process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "0.24mm Draft @Elegoo Giga 0.4 nozzle",
-            "sub_path": "process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle",
-            "sub_path": "process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "0.30mm Strength @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Draft @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle",
-            "sub_path": "process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Fine @Elegoo Giga 0.8 nozzle",
-            "sub_path": "process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle",
-            "sub_path": "process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "0.48mm Draft @Elegoo Giga 0.8 nozzle",
-            "sub_path": "process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle",
-            "sub_path": "process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "0.60mm Draft @Elegoo Giga 1.0 nozzle",
-            "sub_path": "process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json"
-        },
-        {
-            "name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle",
-            "sub_path": "process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json"
-        },
-        {
-            "name": "0.30mm Fine @Elegoo Giga 1.0 nozzle",
-            "sub_path": "process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json"
-        }
-    ],
-    "filament_list": [
-        {
-            "name": "fdm_filament_common",
-            "sub_path": "filament/fdm_filament_common.json"
-        },
-        {
-            "name": "fdm_filament_pla",
-            "sub_path": "filament/fdm_filament_pla.json"
-        },
-        {
-            "name": "fdm_filament_tpu",
-            "sub_path": "filament/fdm_filament_tpu.json"
-        },
-        {
-            "name": "fdm_filament_pet",
-            "sub_path": "filament/fdm_filament_pet.json"
-        },
-        {
-            "name": "fdm_filament_abs",
-            "sub_path": "filament/fdm_filament_abs.json"
-        },
-        {
-            "name": "fdm_filament_pc",
-            "sub_path": "filament/fdm_filament_pc.json"
-        },
-        {
-            "name": "fdm_filament_asa",
-            "sub_path": "filament/fdm_filament_asa.json"
-        },
-        {
-            "name": "fdm_filament_pva",
-            "sub_path": "filament/fdm_filament_pva.json"
-        },
-        {
-            "name": "fdm_filament_pa",
-            "sub_path": "filament/fdm_filament_pa.json"
-        },
-        {
-            "name": "fdm_filament_hips",
-            "sub_path": "filament/fdm_filament_hips.json"
-        },
-        {
-            "name": "fdm_filament_pps",
-            "sub_path": "filament/fdm_filament_pps.json"
-        },
-        {
-            "name": "fdm_filament_ppa",
-            "sub_path": "filament/fdm_filament_ppa.json"
-        },
-        {
-            "name": "Generic ABS @base",
-            "sub_path": "filament/BASE/Generic ABS @base.json"
-        },
-        {
-            "name": "Generic PA @base",
-            "sub_path": "filament/BASE/Generic PA @base.json"
-        },
-        {
-            "name": "Generic PETG @base",
-            "sub_path": "filament/BASE/Generic PETG @base.json"
-        },
-        {
-            "name": "Generic PET @base",
-            "sub_path": "filament/BASE/Generic PET @base.json"
-        },
-        {
-            "name": "Generic PLA @base",
-            "sub_path": "filament/BASE/Generic PLA @base.json"
-        },
-        {
-            "name": "Generic PC @base",
-            "sub_path": "filament/BASE/Generic PC @base.json"
-        },
-        {
-            "name": "Generic ASA @base",
-            "sub_path": "filament/BASE/Generic ASA @base.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @base",
-            "sub_path": "filament/BASE/Elegoo TPU 95A @base.json"
-        },
-        {
-            "name": "Elegoo PETG @base",
-            "sub_path": "filament/BASE/Elegoo PETG @base.json"
-        },
-        {
-            "name": "Elegoo PLA @base",
-            "sub_path": "filament/BASE/Elegoo PLA @base.json"
-        },
-        {
-            "name": "Elegoo ASA @base",
-            "sub_path": "filament/BASE/Elegoo ASA @base.json"
-        },
-        {
-            "name": "Elegoo ABS @base",
-            "sub_path": "filament/BASE/Elegoo ABS @base.json"
-        },
-        {
-            "name": "Elegoo PAHT-CF @base",
-            "sub_path": "filament/BASE/Elegoo PAHT-CF @base.json"
-        },
-        {
-            "name": "Elegoo PC @base",
-            "sub_path": "filament/BASE/Elegoo PC @base.json"
-        },
-        {
-            "name": "Elegoo ASA @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo ASA @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PETG @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @base",
-            "sub_path": "filament/BASE/Elegoo PETG PRO @base.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG PRO @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @base",
-            "sub_path": "filament/BASE/Elegoo PLA Matte @base.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Matte @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @base",
-            "sub_path": "filament/BASE/Elegoo PLA PRO @base.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA PRO @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @base",
-            "sub_path": "filament/BASE/Elegoo PLA Silk @base.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Silk @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA+ @base",
-            "sub_path": "filament/BASE/Elegoo PLA+ @base.json"
-        },
-        {
-            "name": "Elegoo PLA+ @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA+ @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @base",
-            "sub_path": "filament/BASE/Elegoo Rapid PLA+ @base.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo Rapid PLA+ @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @base",
-            "sub_path": "filament/BASE/Elegoo Rapid PETG @base.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo Rapid PETG @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo ABS @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo ABS @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PC @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PC @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PC-FR @base",
-            "sub_path": "filament/BASE/Elegoo PC-FR @base.json"
-        },
-        {
-            "name": "Elegoo PC-FR @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PC-FR @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @base",
-            "sub_path": "filament/BASE/Elegoo PLA Basic @base.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Basic @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @base",
-            "sub_path": "filament/BASE/Elegoo PETG Translucent @base.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @0.2 nozzle",
-            "sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG Translucent @0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo PLA @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA PRO @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA+ @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA+ @ECC.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @ECC",
-            "sub_path": "filament/ECC/Elegoo Rapid PLA+ @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Silk @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Matte @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @base",
-            "sub_path": "filament/BASE/Elegoo PLA-CF @base.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA-CF @ECC.json"
-        },
-        {
-            "name": "Elegoo PETG @ECC",
-            "sub_path": "filament/ECC/Elegoo PETG @ECC.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @ECC",
-            "sub_path": "filament/ECC/Elegoo PETG PRO @ECC.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @ECC",
-            "sub_path": "filament/ECC/Elegoo Rapid PETG @ECC.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @ECC",
-            "sub_path": "filament/ECC/Elegoo TPU 95A @ECC.json"
-        },
-        {
-            "name": "Elegoo ASA @ECC",
-            "sub_path": "filament/ECC/Elegoo ASA @ECC.json"
-        },
-        {
-            "name": "Elegoo ABS @ECC",
-            "sub_path": "filament/ECC/Elegoo ABS @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @base",
-            "sub_path": "filament/BASE/Elegoo PLA Galaxy @base.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Galaxy @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Basic @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @base",
-            "sub_path": "filament/BASE/Elegoo PLA Marble @base.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Marble @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @base",
-            "sub_path": "filament/BASE/Elegoo PLA Sparkle @base.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Sparkle @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @base",
-            "sub_path": "filament/BASE/Elegoo PLA Wood @base.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @ECC",
-            "sub_path": "filament/ECC/Elegoo PLA Wood @ECC.json"
-        },
-        {
-            "name": "Elegoo PAHT-CF @ECC",
-            "sub_path": "filament/ECC/Elegoo PAHT-CF @ECC.json"
-        },
-        {
-            "name": "Elegoo PC @ECC",
-            "sub_path": "filament/ECC/Elegoo PC @ECC.json"
-        },
-        {
-            "name": "Elegoo PC-FR @ECC",
-            "sub_path": "filament/ECC/Elegoo PC-FR @ECC.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @base",
-            "sub_path": "filament/BASE/Elegoo PETG-CF @base.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @ECC",
-            "sub_path": "filament/ECC/Elegoo PETG-CF @ECC.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @base",
-            "sub_path": "filament/BASE/Elegoo PETG-GF @base.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @ECC",
-            "sub_path": "filament/ECC/Elegoo PETG-GF @ECC.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @ECC",
-            "sub_path": "filament/ECC/Elegoo PETG Translucent @ECC.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @base",
-            "sub_path": "filament/BASE/Elegoo Rapid TPU 95A @base.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @ECC",
-            "sub_path": "filament/ECC/Elegoo Rapid TPU 95A @ECC.json"
-        },
-        {
-            "name": "Elegoo PLA @EC",
-            "sub_path": "filament/EC/Elegoo PLA @EC.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @EC",
-            "sub_path": "filament/EC/Elegoo PLA PRO @EC.json"
-        },
-        {
-            "name": "Elegoo PLA+ @EC",
-            "sub_path": "filament/EC/Elegoo PLA+ @EC.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @EC",
-            "sub_path": "filament/EC/Elegoo Rapid PLA+ @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @EC",
-            "sub_path": "filament/EC/Elegoo PLA Silk @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @EC",
-            "sub_path": "filament/EC/Elegoo PLA Matte @EC.json"
-        },
-        {
-            "name": "Elegoo PETG @EC",
-            "sub_path": "filament/EC/Elegoo PETG @EC.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @EC",
-            "sub_path": "filament/EC/Elegoo PETG PRO @EC.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @EC",
-            "sub_path": "filament/EC/Elegoo Rapid PETG @EC.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @EC",
-            "sub_path": "filament/EC/Elegoo TPU 95A @EC.json"
-        },
-        {
-            "name": "Elegoo ASA @EC",
-            "sub_path": "filament/EC/Elegoo ASA @EC.json"
-        },
-        {
-            "name": "Elegoo ABS @EC",
-            "sub_path": "filament/EC/Elegoo ABS @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @EC",
-            "sub_path": "filament/EC/Elegoo PLA Galaxy @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @EC",
-            "sub_path": "filament/EC/Elegoo PLA Basic @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @EC",
-            "sub_path": "filament/EC/Elegoo PLA Marble @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @EC",
-            "sub_path": "filament/EC/Elegoo PLA Sparkle @EC.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @EC",
-            "sub_path": "filament/EC/Elegoo PLA Wood @EC.json"
-        },
-        {
-            "name": "Elegoo PAHT-CF @EC",
-            "sub_path": "filament/EC/Elegoo PAHT-CF @EC.json"
-        },
-        {
-            "name": "Elegoo PC @EC",
-            "sub_path": "filament/EC/Elegoo PC @EC.json"
-        },
-        {
-            "name": "Elegoo PC-FR @EC",
-            "sub_path": "filament/EC/Elegoo PC-FR @EC.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @EC",
-            "sub_path": "filament/EC/Elegoo PETG-CF @EC.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @EC",
-            "sub_path": "filament/EC/Elegoo PETG-GF @EC.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @EC",
-            "sub_path": "filament/EC/Elegoo PETG Translucent @EC.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @EC",
-            "sub_path": "filament/EC/Elegoo Rapid TPU 95A @EC.json"
-        },
-        {
-            "name": "Elegoo PLA @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA PRO @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA PRO @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA+ @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA+ @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA+ @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA+ @EC2.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @ECC2",
-            "sub_path": "filament/ECC2/Elegoo Rapid PLA+ @ECC2.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @EC2",
-            "sub_path": "filament/EC2/Elegoo Rapid PLA+ @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Silk @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Silk @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Matte @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Matte @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA-CF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA-CF @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG PRO @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG PRO @EC2.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @ECC2",
-            "sub_path": "filament/ECC2/Elegoo Rapid PETG @ECC2.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @EC2",
-            "sub_path": "filament/EC2/Elegoo Rapid PETG @EC2.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @ECC2",
-            "sub_path": "filament/ECC2/Elegoo TPU 95A @ECC2.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @EC2",
-            "sub_path": "filament/EC2/Elegoo TPU 95A @EC2.json"
-        },
-        {
-            "name": "Elegoo ASA @ECC2",
-            "sub_path": "filament/ECC2/Elegoo ASA @ECC2.json"
-        },
-        {
-            "name": "Elegoo ASA @EC2",
-            "sub_path": "filament/EC2/Elegoo ASA @EC2.json"
-        },
-        {
-            "name": "Elegoo ABS @ECC2",
-            "sub_path": "filament/ECC2/Elegoo ABS @ECC2.json"
-        },
-        {
-            "name": "Elegoo ABS @EC2",
-            "sub_path": "filament/EC2/Elegoo ABS @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Galaxy @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Galaxy @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Basic @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Basic @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Marble @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Marble @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Sparkle @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Sparkle @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Wood @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Wood @EC2.json"
-        },
-        {
-            "name": "Elegoo PAHT-CF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PAHT-CF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PAHT-CF @EC2",
-            "sub_path": "filament/EC2/Elegoo PAHT-CF @EC2.json"
-        },
-        {
-            "name": "Elegoo PC @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PC @ECC2.json"
-        },
-        {
-            "name": "Elegoo PC @EC2",
-            "sub_path": "filament/EC2/Elegoo PC @EC2.json"
-        },
-        {
-            "name": "Elegoo PC-FR @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PC-FR @ECC2.json"
-        },
-        {
-            "name": "Elegoo PC-FR @EC2",
-            "sub_path": "filament/EC2/Elegoo PC-FR @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG-CF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG-CF @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG-GF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG-GF @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG Translucent @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG Translucent @EC2.json"
-        },
-        {
-            "name": "Elegoo ASA-CF @base",
-            "sub_path": "filament/BASE/Elegoo ASA-CF @base.json"
-        },
-        {
-            "name": "Elegoo ASA-CF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo ASA-CF @ECC2.json"
-        },
-        {
-            "name": "Elegoo ASA-CF @EC2",
-            "sub_path": "filament/EC2/Elegoo ASA-CF @EC2.json"
-        },
-        {
-            "name": "Elegoo PET-CF @base",
-            "sub_path": "filament/BASE/Elegoo PET-CF @base.json"
-        },
-        {
-            "name": "Elegoo PET-CF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PET-CF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PET-CF @EC2",
-            "sub_path": "filament/EC2/Elegoo PET-CF @EC2.json"
-        },
-        {
-            "name": "Elegoo PETG HF @base",
-            "sub_path": "filament/BASE/Elegoo PETG HF @base.json"
-        },
-        {
-            "name": "Elegoo PETG HF @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PETG HF @ECC2.json"
-        },
-        {
-            "name": "Elegoo PETG HF @EC2",
-            "sub_path": "filament/EC2/Elegoo PETG HF @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Glow @base",
-            "sub_path": "filament/BASE/Elegoo PLA Glow @base.json"
-        },
-        {
-            "name": "Elegoo PLA Glow @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Glow @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Glow @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Glow @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA Translucent2 @base",
-            "sub_path": "filament/BASE/Elegoo PLA Translucent2 @base.json"
-        },
-        {
-            "name": "Elegoo PLA Translucent2 @ECC2",
-            "sub_path": "filament/ECC2/Elegoo PLA Translucent2 @ECC2.json"
-        },
-        {
-            "name": "Elegoo PLA Translucent2 @EC2",
-            "sub_path": "filament/EC2/Elegoo PLA Translucent2 @EC2.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @ECC2",
-            "sub_path": "filament/ECC2/Elegoo Rapid TPU 95A @ECC2.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @EC2",
-            "sub_path": "filament/EC2/Elegoo Rapid TPU 95A @EC2.json"
-        },
-        {
-            "name": "Elegoo PLA @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA PRO @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA+ @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA+ @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo Rapid PLA+ @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Silk @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Matte @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA-CF @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PETG @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PETG @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PETG PRO @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo Rapid PETG @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo TPU 95A @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo ASA @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo ASA @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Galaxy @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Basic @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Marble @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Sparkle @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PLA Wood @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PETG-CF @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PETG-GF @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo PETG Translucent @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @EN4 Series",
-            "sub_path": "filament/EN4SERIES/Elegoo Rapid TPU 95A @EN4 Series.json"
-        },
-        {
-            "name": "Elegoo PLA @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA PRO @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA+ @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA+ @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo Rapid PLA+ @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Silk @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Matte @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA-CF @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PETG @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PETG @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PETG PRO @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo Rapid PETG @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo TPU 95A @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo TPU 95A @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo ASA @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo ASA @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Galaxy @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Basic @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Marble @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Sparkle @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PLA Wood @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PETG-CF @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PETG-GF @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo PETG Translucent @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @EN3 Series",
-            "sub_path": "filament/EN3SERIES/Elegoo Rapid TPU 95A @EN3 Series.json"
-        },
-        {
-            "name": "Elegoo PLA @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA PRO @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA PRO @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA+ @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA+ @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo Rapid PLA+ @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Silk @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Silk @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Matte @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA-CF @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA-CF @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PETG @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PETG @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PETG PRO @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo Rapid PETG @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo ASA @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo ASA @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Galaxy @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Basic @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Marble @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Sparkle @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PLA Wood @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PETG-CF @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PETG-GF @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo PETG Translucent @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @EN2 Series",
-            "sub_path": "filament/EN2SERIES/Elegoo Rapid TPU 95A @EN2 Series.json"
-        },
-        {
-            "name": "Elegoo ASA @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PETG @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PETG PRO @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Matte @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo Rapid PETG @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo Rapid PETG @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo Rapid PLA+ @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo Rapid PLA+ @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Galaxy @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Basic @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Marble @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Sparkle @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PLA Wood @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PETG-CF @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PETG-GF @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo PETG Translucent @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json"
-        },
-        {
-            "name": "Elegoo Rapid TPU 95A @Elegoo Giga",
-            "sub_path": "filament/EOSGIGA/Elegoo Rapid TPU 95A @Elegoo Giga.json"
-        },
-        {
-            "name": "Generic ABS @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic ABS @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic ABS @Elegoo",
-            "sub_path": "filament/Generic/Generic ABS @Elegoo.json"
-        },
-        {
-            "name": "Generic ABS-CF @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic ABS-CF @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic ASA @Elegoo",
-            "sub_path": "filament/Generic/Generic ASA @Elegoo.json"
-        },
-        {
-            "name": "Generic ASA-CF @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic ASA-CF @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic PA @Elegoo",
-            "sub_path": "filament/Generic/Generic PA @Elegoo.json"
-        },
-        {
-            "name": "Generic PA6-CF @Elegoo",
-            "sub_path": "filament/Generic/Generic PA6-CF @Elegoo.json"
-        },
-        {
-            "name": "Generic PC @Elegoo",
-            "sub_path": "filament/Generic/Generic PC @Elegoo.json"
-        },
-        {
-            "name": "Generic PC-CF @Elegoo",
-            "sub_path": "filament/Generic/Generic PC-CF @Elegoo.json"
-        },
-        {
-            "name": "Generic PET @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic PET @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic PET-CF @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic PET-CF @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic PETG @Elegoo",
-            "sub_path": "filament/Generic/Generic PETG @Elegoo.json"
-        },
-        {
-            "name": "Generic PETG PRO @Elegoo",
-            "sub_path": "filament/Generic/Generic PETG PRO @Elegoo.json"
-        },
-        {
-            "name": "Generic PETG-CF @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic PETG-CF @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic PLA @Elegoo Centauri",
-            "sub_path": "filament/Generic/Generic PLA @Elegoo Centauri.json"
-        },
-        {
-            "name": "Generic PLA @Elegoo",
-            "sub_path": "filament/Generic/Generic PLA @Elegoo.json"
-        },
-        {
-            "name": "Generic PLA Matte @Elegoo",
-            "sub_path": "filament/Generic/Generic PLA Matte @Elegoo.json"
-        }
-    ],
-    "machine_list": [
-        {
-            "name": "fdm_machine_common",
-            "sub_path": "machine/fdm_machine_common.json"
-        },
-        {
-            "name": "fdm_elegoo_common",
-            "sub_path": "machine/fdm_elegoo_common.json"
-        },
-        {
-            "name": "fdm_elegoo_3dp_001_common",
-            "sub_path": "machine/fdm_elegoo_3dp_001_common.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 0.4 nozzle",
-            "sub_path": "machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 0.2 nozzle",
-            "sub_path": "machine/ECC/Elegoo Centauri Carbon 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 0.6 nozzle",
-            "sub_path": "machine/ECC/Elegoo Centauri Carbon 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 0.8 nozzle",
-            "sub_path": "machine/ECC/Elegoo Centauri Carbon 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 0.4 nozzle",
-            "sub_path": "machine/EC/Elegoo Centauri 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 0.2 nozzle",
-            "sub_path": "machine/EC/Elegoo Centauri 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 0.6 nozzle",
-            "sub_path": "machine/EC/Elegoo Centauri 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 0.8 nozzle",
-            "sub_path": "machine/EC/Elegoo Centauri 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 2 0.4 nozzle",
-            "sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 2 0.4 nozzle",
-            "sub_path": "machine/EC2/Elegoo Centauri 2 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 2 0.2 nozzle",
-            "sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 2 0.2 nozzle",
-            "sub_path": "machine/EC2/Elegoo Centauri 2 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 2 0.6 nozzle",
-            "sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 2 0.6 nozzle",
-            "sub_path": "machine/EC2/Elegoo Centauri 2 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri Carbon 2 0.8 nozzle",
-            "sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Centauri 2 0.8 nozzle",
-            "sub_path": "machine/EC2/Elegoo Centauri 2 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 0.4 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 0.2 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 0.6 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 0.8 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 1.0 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro 0.4 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro 0.2 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro 0.6 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro 0.8 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Pro 1.0 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus 0.4 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus 0.2 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus 0.6 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus 0.8 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Plus 1.0 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max 0.4 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max 0.2 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max 0.6 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max 0.8 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 4 Max 1.0 nozzle",
-            "sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo OrangeStorm Giga 0.4 nozzle",
-            "sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo OrangeStorm Giga 0.6 nozzle",
-            "sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo OrangeStorm Giga 0.8 nozzle",
-            "sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo OrangeStorm Giga 1.0 nozzle",
-            "sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro 0.4 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro 0.2 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro 0.6 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro 0.8 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Pro 1.0 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus 0.4 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus 0.2 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus 0.6 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus 0.8 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Plus 1.0 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max 0.4 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max 0.2 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.2 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max 0.6 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max 0.8 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 Max 1.0 nozzle",
-            "sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 1.0 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 3 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune X 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune X 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune X 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2S 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2S 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2S 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2D 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2D 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 2D 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.8 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 0.4 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 0.6 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 0.6 nozzle.json"
-        },
-        {
-            "name": "Elegoo Neptune 0.8 nozzle",
-            "sub_path": "machine/EN2SERIES/Elegoo Neptune 0.8 nozzle.json"
-        }
-    ]
-}
\ No newline at end of file
+	"name": "Elegoo",
+	"version": "02.04.00.09",
+	"force_update": "0",
+	"description": "Elegoo configurations",
+	"machine_model_list": [
+		{
+			"name": "Elegoo Centauri",
+			"sub_path": "machine/EC/Elegoo Centauri.json"
+		},
+		{
+			"name": "Elegoo Centauri 2",
+			"sub_path": "machine/EC2/Elegoo Centauri 2.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon",
+			"sub_path": "machine/ECC/Elegoo Centauri Carbon.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 2",
+			"sub_path": "machine/ECC2/Elegoo Centauri Carbon 2.json"
+		},
+		{
+			"name": "Elegoo Neptune",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune.json"
+		},
+		{
+			"name": "Elegoo Neptune 2",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2.json"
+		},
+		{
+			"name": "Elegoo Neptune 2D",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2D.json"
+		},
+		{
+			"name": "Elegoo Neptune 2S",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2S.json"
+		},
+		{
+			"name": "Elegoo Neptune 3",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 3.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro.json"
+		},
+		{
+			"name": "Elegoo Neptune 4",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro.json"
+		},
+		{
+			"name": "Elegoo Neptune X",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune X.json"
+		},
+		{
+			"name": "Elegoo OrangeStorm Giga",
+			"sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_elegoo_common",
+			"sub_path": "process/fdm_process_elegoo_common.json"
+		},
+		{
+			"name": "fdm_process_elegoo_02010",
+			"sub_path": "process/fdm_process_elegoo_02010.json"
+		},
+		{
+			"name": "fdm_process_elegoo_04020",
+			"sub_path": "process/fdm_process_elegoo_04020.json"
+		},
+		{
+			"name": "fdm_process_elegoo_06030",
+			"sub_path": "process/fdm_process_elegoo_06030.json"
+		},
+		{
+			"name": "fdm_process_elegoo_08040",
+			"sub_path": "process/fdm_process_elegoo_08040.json"
+		},
+		{
+			"name": "fdm_process_elegoo_10050",
+			"sub_path": "process/fdm_process_elegoo_10050.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo C 0.2 nozzle",
+			"sub_path": "process/EC/0.10mm Standard @Elegoo C 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo C2 0.2 nozzle",
+			"sub_path": "process/EC2/0.10mm Standard @Elegoo C2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo CC 0.2 nozzle",
+			"sub_path": "process/ECC/0.10mm Standard @Elegoo CC 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
+			"sub_path": "process/ECC2/0.10mm Standard @Elegoo CC2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N3Max 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N3Plus 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N3Pro 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.10mm Standard @Elegoo N3Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N4 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N4Max 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.20mm Standard @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.20mm Standard @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.20mm Standard @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.20mm Standard @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
+			"sub_path": "process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.30mm Standard @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.30mm Standard @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.30mm Standard @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.30mm Standard @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N3Max 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Standard @Elegoo N3Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N4 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N4Max 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
+			"sub_path": "process/EN2SERIES/0.30mm Standard @Elegoo Neptune 0.6 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo C 0.8 nozzle",
+			"sub_path": "process/EC/0.40mm Standard @Elegoo C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo C2 0.8 nozzle",
+			"sub_path": "process/EC2/0.40mm Standard @Elegoo C2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo CC 0.8 nozzle",
+			"sub_path": "process/ECC/0.40mm Standard @Elegoo CC 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
+			"sub_path": "process/ECC2/0.40mm Standard @Elegoo CC2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
+			"sub_path": "process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N3Max 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Standard @Elegoo N3Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N4 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N4Max 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
+			"sub_path": "process/EN2SERIES/0.40mm Standard @Elegoo Neptune 0.8 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
+			"sub_path": "process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N3Max 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.50mm Standard @Elegoo N3Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N4 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N4Max 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.50mm Standard @Elegoo N4Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo C 0.2 nozzle",
+			"sub_path": "process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo C 0.2 nozzle",
+			"sub_path": "process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json"
+		},
+		{
+			"name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle",
+			"sub_path": "process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo C2 0.2 nozzle",
+			"sub_path": "process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo C2 0.2 nozzle",
+			"sub_path": "process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.14mm Extra Draft @Elegoo C2 0.2 nozzle",
+			"sub_path": "process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo CC 0.2 nozzle",
+			"sub_path": "process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo CC 0.2 nozzle",
+			"sub_path": "process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json"
+		},
+		{
+			"name": "0.14mm Extra Draft @Elegoo CC 0.2 nozzle",
+			"sub_path": "process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo CC2 0.2 nozzle",
+			"sub_path": "process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo CC2 0.2 nozzle",
+			"sub_path": "process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.14mm Extra Draft @Elegoo CC2 0.2 nozzle",
+			"sub_path": "process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N3Max 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N3Max 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N3Plus 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N3Plus 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N3Pro 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N3Pro 0.2 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N4 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N4 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N4Max 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N4Max 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N4Plus 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N4Plus 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm Optimal @Elegoo N4Pro 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Draft @Elegoo N4Pro 0.2 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle",
+			"sub_path": "process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo C2 0.4 nozzle",
+			"sub_path": "process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo CC 0.4 nozzle",
+			"sub_path": "process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo CC2 0.4 nozzle",
+			"sub_path": "process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle",
+			"sub_path": "process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo Giga 0.4 nozzle",
+			"sub_path": "process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo Giga 0.4 nozzle",
+			"sub_path": "process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle",
+			"sub_path": "process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle",
+			"sub_path": "process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N4 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle",
+			"sub_path": "process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Fine @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Optimal @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Strength @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Draft @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle",
+			"sub_path": "process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "0.18mm Fine @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle",
+			"sub_path": "process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json"
+		},
+		{
+			"name": "0.18mm Fine @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo C2 0.6 nozzle",
+			"sub_path": "process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.18mm Fine @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo CC 0.6 nozzle",
+			"sub_path": "process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json"
+		},
+		{
+			"name": "0.18mm Fine @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo CC2 0.6 nozzle",
+			"sub_path": "process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.30mm Strength @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle",
+			"sub_path": "process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N3Max 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N3Max 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N3Plus 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N3Plus 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N3Pro 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N3Pro 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle",
+			"sub_path": "process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N4 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N4 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N4 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N4Max 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N4Max 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N4Plus 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N4Plus 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo N4Pro 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo N4Pro 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle",
+			"sub_path": "process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Optimal @Elegoo Neptune 0.6 nozzle",
+			"sub_path": "process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Draft @Elegoo Neptune 0.6 nozzle",
+			"sub_path": "process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json"
+		},
+		{
+			"name": "0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle",
+			"sub_path": "process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json"
+		},
+		{
+			"name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle",
+			"sub_path": "process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo C 0.8 nozzle",
+			"sub_path": "process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo C 0.8 nozzle",
+			"sub_path": "process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo C 0.8 nozzle",
+			"sub_path": "process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.16mm Extra Fine @Elegoo C2 0.8 nozzle",
+			"sub_path": "process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo C2 0.8 nozzle",
+			"sub_path": "process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo C2 0.8 nozzle",
+			"sub_path": "process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo C2 0.8 nozzle",
+			"sub_path": "process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.16mm Extra Fine @Elegoo CC 0.8 nozzle",
+			"sub_path": "process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo CC 0.8 nozzle",
+			"sub_path": "process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo CC 0.8 nozzle",
+			"sub_path": "process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo CC 0.8 nozzle",
+			"sub_path": "process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json"
+		},
+		{
+			"name": "0.16mm Extra Fine @Elegoo CC2 0.8 nozzle",
+			"sub_path": "process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo CC2 0.8 nozzle",
+			"sub_path": "process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo CC2 0.8 nozzle",
+			"sub_path": "process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo CC2 0.8 nozzle",
+			"sub_path": "process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo Giga 0.8 nozzle",
+			"sub_path": "process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle",
+			"sub_path": "process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo Giga 0.8 nozzle",
+			"sub_path": "process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle",
+			"sub_path": "process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N3Max 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N3Max 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N3Max 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N3Plus 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N3Plus 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N3Plus 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N3Pro 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N3Pro 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N3Pro 0.8 nozzle",
+			"sub_path": "process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N4 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N4 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N4 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N4Max 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N4Max 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N4Max 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N4Plus 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N4Plus 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N4Plus 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo N4Pro 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo N4Pro 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Draft @Elegoo N4Pro 0.8 nozzle",
+			"sub_path": "process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Fine @Elegoo Neptune 0.8 nozzle",
+			"sub_path": "process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json"
+		},
+		{
+			"name": "0.32mm Optimal @Elegoo Neptune 0.8 nozzle",
+			"sub_path": "process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo Giga 1.0 nozzle",
+			"sub_path": "process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle",
+			"sub_path": "process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo Giga 1.0 nozzle",
+			"sub_path": "process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N3Max 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N3Max 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N3Max 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N3Plus 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N3Plus 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N3Plus 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N3Pro 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N3Pro 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N3Pro 1.0 nozzle",
+			"sub_path": "process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N4 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N4 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N4 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N4Max 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N4Max 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N4Max 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N4Plus 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N4Plus 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N4Plus 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "0.30mm Fine @Elegoo N4Pro 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.40mm Optimal @Elegoo N4Pro 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "0.60mm Draft @Elegoo N4Pro 1.0 nozzle",
+			"sub_path": "process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_hips",
+			"sub_path": "filament/fdm_filament_hips.json"
+		},
+		{
+			"name": "fdm_filament_pa",
+			"sub_path": "filament/fdm_filament_pa.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_ppa",
+			"sub_path": "filament/fdm_filament_ppa.json"
+		},
+		{
+			"name": "fdm_filament_pps",
+			"sub_path": "filament/fdm_filament_pps.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "Elegoo ABS @base",
+			"sub_path": "filament/BASE/Elegoo ABS @base.json"
+		},
+		{
+			"name": "Generic ABS @base",
+			"sub_path": "filament/BASE/Generic ABS @base.json"
+		},
+		{
+			"name": "Elegoo ASA @base",
+			"sub_path": "filament/BASE/Elegoo ASA @base.json"
+		},
+		{
+			"name": "Generic ASA @base",
+			"sub_path": "filament/BASE/Generic ASA @base.json"
+		},
+		{
+			"name": "Elegoo PAHT-CF @base",
+			"sub_path": "filament/BASE/Elegoo PAHT-CF @base.json"
+		},
+		{
+			"name": "Generic PA @base",
+			"sub_path": "filament/BASE/Generic PA @base.json"
+		},
+		{
+			"name": "Elegoo PC @base",
+			"sub_path": "filament/BASE/Elegoo PC @base.json"
+		},
+		{
+			"name": "Generic PC @base",
+			"sub_path": "filament/BASE/Generic PC @base.json"
+		},
+		{
+			"name": "Elegoo PETG @base",
+			"sub_path": "filament/BASE/Elegoo PETG @base.json"
+		},
+		{
+			"name": "Generic PET @base",
+			"sub_path": "filament/BASE/Generic PET @base.json"
+		},
+		{
+			"name": "Generic PETG @base",
+			"sub_path": "filament/BASE/Generic PETG @base.json"
+		},
+		{
+			"name": "Elegoo PLA @base",
+			"sub_path": "filament/BASE/Elegoo PLA @base.json"
+		},
+		{
+			"name": "Generic PLA @base",
+			"sub_path": "filament/BASE/Generic PLA @base.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @base",
+			"sub_path": "filament/BASE/Elegoo TPU 95A @base.json"
+		},
+		{
+			"name": "Elegoo ABS @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo ABS @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo ABS @EC",
+			"sub_path": "filament/EC/Elegoo ABS @EC.json"
+		},
+		{
+			"name": "Elegoo ABS @EC2",
+			"sub_path": "filament/EC2/Elegoo ABS @EC2.json"
+		},
+		{
+			"name": "Elegoo ABS @ECC",
+			"sub_path": "filament/ECC/Elegoo ABS @ECC.json"
+		},
+		{
+			"name": "Elegoo ABS @ECC2",
+			"sub_path": "filament/ECC2/Elegoo ABS @ECC2.json"
+		},
+		{
+			"name": "Generic ABS @Elegoo",
+			"sub_path": "filament/Generic/Generic ABS @Elegoo.json"
+		},
+		{
+			"name": "Generic ABS @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic ABS @Elegoo Centauri.json"
+		},
+		{
+			"name": "Generic ABS-CF @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic ABS-CF @Elegoo Centauri.json"
+		},
+		{
+			"name": "Elegoo ASA @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo ASA @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo ASA @EC",
+			"sub_path": "filament/EC/Elegoo ASA @EC.json"
+		},
+		{
+			"name": "Elegoo ASA @EC2",
+			"sub_path": "filament/EC2/Elegoo ASA @EC2.json"
+		},
+		{
+			"name": "Elegoo ASA @ECC",
+			"sub_path": "filament/ECC/Elegoo ASA @ECC.json"
+		},
+		{
+			"name": "Elegoo ASA @ECC2",
+			"sub_path": "filament/ECC2/Elegoo ASA @ECC2.json"
+		},
+		{
+			"name": "Elegoo ASA @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo ASA @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo ASA @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo ASA @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo ASA @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo ASA @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo ASA @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo ASA-CF @base",
+			"sub_path": "filament/BASE/Elegoo ASA-CF @base.json"
+		},
+		{
+			"name": "Generic ASA @Elegoo",
+			"sub_path": "filament/Generic/Generic ASA @Elegoo.json"
+		},
+		{
+			"name": "Generic ASA-CF @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic ASA-CF @Elegoo Centauri.json"
+		},
+		{
+			"name": "Elegoo PAHT-CF @EC",
+			"sub_path": "filament/EC/Elegoo PAHT-CF @EC.json"
+		},
+		{
+			"name": "Elegoo PAHT-CF @EC2",
+			"sub_path": "filament/EC2/Elegoo PAHT-CF @EC2.json"
+		},
+		{
+			"name": "Elegoo PAHT-CF @ECC",
+			"sub_path": "filament/ECC/Elegoo PAHT-CF @ECC.json"
+		},
+		{
+			"name": "Elegoo PAHT-CF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PAHT-CF @ECC2.json"
+		},
+		{
+			"name": "Generic PA @Elegoo",
+			"sub_path": "filament/Generic/Generic PA @Elegoo.json"
+		},
+		{
+			"name": "Generic PA6-CF @Elegoo",
+			"sub_path": "filament/Generic/Generic PA6-CF @Elegoo.json"
+		},
+		{
+			"name": "Elegoo PC @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PC @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PC @EC",
+			"sub_path": "filament/EC/Elegoo PC @EC.json"
+		},
+		{
+			"name": "Elegoo PC @EC2",
+			"sub_path": "filament/EC2/Elegoo PC @EC2.json"
+		},
+		{
+			"name": "Elegoo PC @ECC",
+			"sub_path": "filament/ECC/Elegoo PC @ECC.json"
+		},
+		{
+			"name": "Elegoo PC @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PC @ECC2.json"
+		},
+		{
+			"name": "Elegoo PC-FR @base",
+			"sub_path": "filament/BASE/Elegoo PC-FR @base.json"
+		},
+		{
+			"name": "Generic PC @Elegoo",
+			"sub_path": "filament/Generic/Generic PC @Elegoo.json"
+		},
+		{
+			"name": "Generic PC-CF @Elegoo",
+			"sub_path": "filament/Generic/Generic PC-CF @Elegoo.json"
+		},
+		{
+			"name": "Elegoo PET-CF @base",
+			"sub_path": "filament/BASE/Elegoo PET-CF @base.json"
+		},
+		{
+			"name": "Elegoo PETG @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PETG @EC",
+			"sub_path": "filament/EC/Elegoo PETG @EC.json"
+		},
+		{
+			"name": "Elegoo PETG @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG @ECC",
+			"sub_path": "filament/ECC/Elegoo PETG @ECC.json"
+		},
+		{
+			"name": "Elegoo PETG @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PETG @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PETG @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PETG @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PETG @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PETG @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PETG @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PETG HF @base",
+			"sub_path": "filament/BASE/Elegoo PETG HF @base.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @base",
+			"sub_path": "filament/BASE/Elegoo PETG PRO @base.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @base",
+			"sub_path": "filament/BASE/Elegoo PETG Translucent @base.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @base",
+			"sub_path": "filament/BASE/Elegoo PETG-CF @base.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @base",
+			"sub_path": "filament/BASE/Elegoo PETG-GF @base.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @base",
+			"sub_path": "filament/BASE/Elegoo Rapid PETG @base.json"
+		},
+		{
+			"name": "Generic PET @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic PET @Elegoo Centauri.json"
+		},
+		{
+			"name": "Generic PET-CF @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic PET-CF @Elegoo Centauri.json"
+		},
+		{
+			"name": "Generic PETG @Elegoo",
+			"sub_path": "filament/Generic/Generic PETG @Elegoo.json"
+		},
+		{
+			"name": "Generic PETG PRO @Elegoo",
+			"sub_path": "filament/Generic/Generic PETG PRO @Elegoo.json"
+		},
+		{
+			"name": "Generic PETG-CF @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic PETG-CF @Elegoo Centauri.json"
+		},
+		{
+			"name": "Elegoo PLA @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA @EC",
+			"sub_path": "filament/EC/Elegoo PLA @EC.json"
+		},
+		{
+			"name": "Elegoo PLA @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @base",
+			"sub_path": "filament/BASE/Elegoo PLA Basic @base.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @base",
+			"sub_path": "filament/BASE/Elegoo PLA Galaxy @base.json"
+		},
+		{
+			"name": "Elegoo PLA Glow @base",
+			"sub_path": "filament/BASE/Elegoo PLA Glow @base.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @base",
+			"sub_path": "filament/BASE/Elegoo PLA Marble @base.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @base",
+			"sub_path": "filament/BASE/Elegoo PLA Matte @base.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @base",
+			"sub_path": "filament/BASE/Elegoo PLA PRO @base.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @base",
+			"sub_path": "filament/BASE/Elegoo PLA Silk @base.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @base",
+			"sub_path": "filament/BASE/Elegoo PLA Sparkle @base.json"
+		},
+		{
+			"name": "Elegoo PLA Translucent2 @base",
+			"sub_path": "filament/BASE/Elegoo PLA Translucent2 @base.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @base",
+			"sub_path": "filament/BASE/Elegoo PLA Wood @base.json"
+		},
+		{
+			"name": "Elegoo PLA+ @base",
+			"sub_path": "filament/BASE/Elegoo PLA+ @base.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @base",
+			"sub_path": "filament/BASE/Elegoo PLA-CF @base.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @base",
+			"sub_path": "filament/BASE/Elegoo Rapid PLA+ @base.json"
+		},
+		{
+			"name": "Generic PLA @Elegoo",
+			"sub_path": "filament/Generic/Generic PLA @Elegoo.json"
+		},
+		{
+			"name": "Generic PLA @Elegoo Centauri",
+			"sub_path": "filament/Generic/Generic PLA @Elegoo Centauri.json"
+		},
+		{
+			"name": "Generic PLA Matte @Elegoo",
+			"sub_path": "filament/Generic/Generic PLA Matte @Elegoo.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @base",
+			"sub_path": "filament/BASE/Elegoo Rapid TPU 95A @base.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @EC",
+			"sub_path": "filament/EC/Elegoo TPU 95A @EC.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @EC2",
+			"sub_path": "filament/EC2/Elegoo TPU 95A @EC2.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @ECC",
+			"sub_path": "filament/ECC/Elegoo TPU 95A @ECC.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @ECC2",
+			"sub_path": "filament/ECC2/Elegoo TPU 95A @ECC2.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo TPU 95A @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo TPU 95A @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo TPU 95A @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo ASA-CF @EC2",
+			"sub_path": "filament/EC2/Elegoo ASA-CF @EC2.json"
+		},
+		{
+			"name": "Elegoo ASA-CF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo ASA-CF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PC-FR @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PC-FR @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PC-FR @EC",
+			"sub_path": "filament/EC/Elegoo PC-FR @EC.json"
+		},
+		{
+			"name": "Elegoo PC-FR @EC2",
+			"sub_path": "filament/EC2/Elegoo PC-FR @EC2.json"
+		},
+		{
+			"name": "Elegoo PC-FR @ECC",
+			"sub_path": "filament/ECC/Elegoo PC-FR @ECC.json"
+		},
+		{
+			"name": "Elegoo PC-FR @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PC-FR @ECC2.json"
+		},
+		{
+			"name": "Elegoo PET-CF @EC2",
+			"sub_path": "filament/EC2/Elegoo PET-CF @EC2.json"
+		},
+		{
+			"name": "Elegoo PET-CF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PET-CF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG HF @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG HF @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG HF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG HF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG PRO @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @EC",
+			"sub_path": "filament/EC/Elegoo PETG PRO @EC.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG PRO @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @ECC",
+			"sub_path": "filament/ECC/Elegoo PETG PRO @ECC.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG PRO @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PETG PRO @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PETG PRO @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PETG PRO @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PETG Translucent @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @EC",
+			"sub_path": "filament/EC/Elegoo PETG Translucent @EC.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG Translucent @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @ECC",
+			"sub_path": "filament/ECC/Elegoo PETG Translucent @ECC.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG Translucent @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PETG Translucent @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PETG Translucent @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PETG Translucent @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @EC",
+			"sub_path": "filament/EC/Elegoo PETG-CF @EC.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG-CF @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @ECC",
+			"sub_path": "filament/ECC/Elegoo PETG-CF @ECC.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG-CF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PETG-CF @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PETG-CF @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PETG-CF @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @EC",
+			"sub_path": "filament/EC/Elegoo PETG-GF @EC.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @EC2",
+			"sub_path": "filament/EC2/Elegoo PETG-GF @EC2.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @ECC",
+			"sub_path": "filament/ECC/Elegoo PETG-GF @ECC.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PETG-GF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PETG-GF @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PETG-GF @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PETG-GF @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo Rapid PETG @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @EC",
+			"sub_path": "filament/EC/Elegoo Rapid PETG @EC.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @EC2",
+			"sub_path": "filament/EC2/Elegoo Rapid PETG @EC2.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @ECC",
+			"sub_path": "filament/ECC/Elegoo Rapid PETG @ECC.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @ECC2",
+			"sub_path": "filament/ECC2/Elegoo Rapid PETG @ECC2.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo Rapid PETG @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo Rapid PETG @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo Rapid PETG @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo Rapid PETG @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Basic @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @EC",
+			"sub_path": "filament/EC/Elegoo PLA Basic @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Basic @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Basic @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Basic @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Basic @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Basic @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Basic @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @EC",
+			"sub_path": "filament/EC/Elegoo PLA Galaxy @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Galaxy @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Galaxy @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Galaxy @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Galaxy @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Galaxy @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Galaxy @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Glow @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Glow @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Glow @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Glow @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @EC",
+			"sub_path": "filament/EC/Elegoo PLA Marble @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Marble @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Marble @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Marble @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Marble @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Marble @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Marble @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Matte @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @EC",
+			"sub_path": "filament/EC/Elegoo PLA Matte @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Matte @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Matte @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Matte @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Matte @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Matte @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Matte @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA PRO @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @EC",
+			"sub_path": "filament/EC/Elegoo PLA PRO @EC.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA PRO @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA PRO @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA PRO @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA PRO @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA PRO @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA PRO @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA Silk @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @EC",
+			"sub_path": "filament/EC/Elegoo PLA Silk @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Silk @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Silk @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Silk @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Silk @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Silk @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Silk @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @EC",
+			"sub_path": "filament/EC/Elegoo PLA Sparkle @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Sparkle @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Sparkle @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Sparkle @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Sparkle @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Sparkle @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Sparkle @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA Translucent2 @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Translucent2 @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Translucent2 @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Translucent2 @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @EC",
+			"sub_path": "filament/EC/Elegoo PLA Wood @EC.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA Wood @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA Wood @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA Wood @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA Wood @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA Wood @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA Wood @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo PLA+ @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo PLA+ @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo PLA+ @EC",
+			"sub_path": "filament/EC/Elegoo PLA+ @EC.json"
+		},
+		{
+			"name": "Elegoo PLA+ @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA+ @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA+ @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA+ @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA+ @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA+ @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA+ @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA+ @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA+ @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA+ @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA+ @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA+ @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @EC2",
+			"sub_path": "filament/EC2/Elegoo PLA-CF @EC2.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @ECC",
+			"sub_path": "filament/ECC/Elegoo PLA-CF @ECC.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @ECC2",
+			"sub_path": "filament/ECC2/Elegoo PLA-CF @ECC2.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo PLA-CF @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo PLA-CF @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo PLA-CF @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @0.2 nozzle",
+			"sub_path": "filament/ELEGOO_02_NOZZLE/Elegoo Rapid PLA+ @0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @EC",
+			"sub_path": "filament/EC/Elegoo Rapid PLA+ @EC.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @EC2",
+			"sub_path": "filament/EC2/Elegoo Rapid PLA+ @EC2.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @ECC",
+			"sub_path": "filament/ECC/Elegoo Rapid PLA+ @ECC.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @ECC2",
+			"sub_path": "filament/ECC2/Elegoo Rapid PLA+ @ECC2.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo Rapid PLA+ @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo Rapid PLA+ @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo Rapid PLA+ @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo Rapid PLA+ @Elegoo Giga.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @EC",
+			"sub_path": "filament/EC/Elegoo Rapid TPU 95A @EC.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @EC2",
+			"sub_path": "filament/EC2/Elegoo Rapid TPU 95A @EC2.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @ECC",
+			"sub_path": "filament/ECC/Elegoo Rapid TPU 95A @ECC.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @ECC2",
+			"sub_path": "filament/ECC2/Elegoo Rapid TPU 95A @ECC2.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @EN2 Series",
+			"sub_path": "filament/EN2SERIES/Elegoo Rapid TPU 95A @EN2 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @EN3 Series",
+			"sub_path": "filament/EN3SERIES/Elegoo Rapid TPU 95A @EN3 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @EN4 Series",
+			"sub_path": "filament/EN4SERIES/Elegoo Rapid TPU 95A @EN4 Series.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @Elegoo Giga",
+			"sub_path": "filament/EOSGIGA/Elegoo Rapid TPU 95A @Elegoo Giga.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_machine_common",
+			"sub_path": "machine/fdm_machine_common.json"
+		},
+		{
+			"name": "fdm_elegoo_3dp_001_common",
+			"sub_path": "machine/fdm_elegoo_3dp_001_common.json"
+		},
+		{
+			"name": "fdm_elegoo_common",
+			"sub_path": "machine/fdm_elegoo_common.json"
+		},
+		{
+			"name": "Elegoo Centauri 0.4 nozzle",
+			"sub_path": "machine/EC/Elegoo Centauri 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 2 0.4 nozzle",
+			"sub_path": "machine/EC2/Elegoo Centauri 2 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 0.4 nozzle",
+			"sub_path": "machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 2 0.4 nozzle",
+			"sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 0.4 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo OrangeStorm Giga 0.4 nozzle",
+			"sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2S 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune X 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 0.2 nozzle",
+			"sub_path": "machine/EC/Elegoo Centauri 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 0.6 nozzle",
+			"sub_path": "machine/EC/Elegoo Centauri 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 0.8 nozzle",
+			"sub_path": "machine/EC/Elegoo Centauri 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 2 0.2 nozzle",
+			"sub_path": "machine/EC2/Elegoo Centauri 2 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 2 0.6 nozzle",
+			"sub_path": "machine/EC2/Elegoo Centauri 2 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri 2 0.8 nozzle",
+			"sub_path": "machine/EC2/Elegoo Centauri 2 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 0.2 nozzle",
+			"sub_path": "machine/ECC/Elegoo Centauri Carbon 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 0.6 nozzle",
+			"sub_path": "machine/ECC/Elegoo Centauri Carbon 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 0.8 nozzle",
+			"sub_path": "machine/ECC/Elegoo Centauri Carbon 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 2 0.2 nozzle",
+			"sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 2 0.6 nozzle",
+			"sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Centauri Carbon 2 0.8 nozzle",
+			"sub_path": "machine/ECC2/Elegoo Centauri Carbon 2 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 0.2 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 0.6 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 0.8 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 1.0 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max 0.4 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus 0.4 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro 0.4 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo OrangeStorm Giga 0.6 nozzle",
+			"sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo OrangeStorm Giga 0.8 nozzle",
+			"sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo OrangeStorm Giga 1.0 nozzle",
+			"sub_path": "machine/EOSGIGA/Elegoo OrangeStorm Giga 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2D 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 0.4 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2S 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2S 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2S 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max 0.4 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro 0.2 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro 0.6 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro 0.8 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Pro 1.0 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune X 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune X 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune X 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max 0.2 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max 0.6 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max 0.8 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Max 1.0 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Max 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus 0.2 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus 0.6 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus 0.8 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Plus 1.0 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Plus 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro 0.2 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro 0.6 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro 0.8 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 4 Pro 1.0 nozzle",
+			"sub_path": "machine/EN4SERIES/Elegoo Neptune 4 Pro 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2D 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 2D 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 0.6 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 0.8 nozzle",
+			"sub_path": "machine/EN2SERIES/Elegoo Neptune 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max 0.2 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max 0.6 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max 0.8 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Max 1.0 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Max 1.0 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus 0.2 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.2 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus 0.6 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.6 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus 0.8 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 0.8 nozzle.json"
+		},
+		{
+			"name": "Elegoo Neptune 3 Plus 1.0 nozzle",
+			"sub_path": "machine/EN3SERIES/Elegoo Neptune 3 Plus 1.0 nozzle.json"
+		}
+	]
+}
diff --git a/resources/profiles/Elegoo/filament/fdm_filament_paht.json b/resources/profiles/Elegoo/filament/fdm_filament_paht.json
deleted file mode 100644
index 058469ff71..0000000000
--- a/resources/profiles/Elegoo/filament/fdm_filament_paht.json
+++ /dev/null
@@ -1,91 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_paht",
-	"inherits": "fdm_filament_common",
-	"from": "system",
-	"instantiation": "false",
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_type": [
-		"PAHT"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_cost": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_min_speed": [
-		"50"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"filament_start_gcode": [
-		"; Filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_vendor": [
-		"Generic"
-	]
-}
diff --git a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
index fffd18ea44..5bbfacf133 100644
--- a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
+++ b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
@@ -1,9 +1,9 @@
 {
 	"type": "machine",
 	"name": "fdm_elegoo_common",
+	"inherits": "fdm_machine_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_machine_common",
 	"gcode_flavor": "marlin",
 	"printer_technology": "FFF",
 	"nozzle_diameter": [
@@ -141,7 +141,6 @@
 	"thumbnails_format": "PNG",
 	"nozzle_type": "brass",
 	"machine_end_gcode": "G90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+100, printable_height)} E-8 F{travel_speed*60} ; Move print head up\nG1 Z{min(max_layer_z+100, printable_height-2)} F600\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM84 ;Disable all steppers",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M600",
diff --git a/resources/profiles/Elegoo/machine/fdm_machine_common.json b/resources/profiles/Elegoo/machine/fdm_machine_common.json
index 249e760920..283197aa4e 100644
--- a/resources/profiles/Elegoo/machine/fdm_machine_common.json
+++ b/resources/profiles/Elegoo/machine/fdm_machine_common.json
@@ -20,7 +20,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json
index e6a04bb40a..9577a8e2db 100644
--- a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json	
+++ b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json	
@@ -1,15 +1,14 @@
 {
 	"type": "process",
 	"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
+	"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
 	"inherits": "fdm_process_elegoo_06030",
 	"from": "system",
 	"setting_id": "mMP6cZhv9TYjYlEh",
 	"instantiation": "true",
-	"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_acceleration": "1000",
-	"is_custom_defined": "0",
 	"make_overhang_printable_angle": "90",
 	"outer_wall_acceleration": "2000",
 	"resolution": "0.05",
diff --git a/resources/profiles/Elegoo/process/fdm_process_common.json b/resources/profiles/Elegoo/process/fdm_process_common.json
index a2bd0ea5f1..01b285b7f0 100644
--- a/resources/profiles/Elegoo/process/fdm_process_common.json
+++ b/resources/profiles/Elegoo/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
@@ -28,7 +27,6 @@
 	"sparse_infill_line_width": "0.45",
 	"infill_wall_overlap": "15%",
 	"sparse_infill_speed": "50",
-	"overhang_speed_classic": "1",
 	"interface_shells": "0",
 	"detect_overhang_wall": "0",
 	"reduce_infill_retraction": "1",
diff --git a/resources/profiles/Elegoo/process/fdm_process_elegoo_02010.json b/resources/profiles/Elegoo/process/fdm_process_elegoo_02010.json
index 30fa79753b..615c0eeccd 100644
--- a/resources/profiles/Elegoo/process/fdm_process_elegoo_02010.json
+++ b/resources/profiles/Elegoo/process/fdm_process_elegoo_02010.json
@@ -24,7 +24,6 @@
 	"sparse_infill_speed": "100",
 	"inner_wall_speed": "100",
 	"internal_solid_infill_speed": "100",
-	"is_custom_defined": "0",
 	"outer_wall_speed": "60",
 	"top_surface_speed": "80"
 }
diff --git a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json
index 2ca6daf45b..1e61b87f49 100644
--- a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json
+++ b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json
@@ -16,7 +16,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Eryone.json b/resources/profiles/Eryone.json
index 488ba18337..1ee1f88ed8 100644
--- a/resources/profiles/Eryone.json
+++ b/resources/profiles/Eryone.json
@@ -1,6 +1,6 @@
 {
 	"name": "Eryone",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Eryone  configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Eryone/filament/Eryone Standard PLA.json b/resources/profiles/Eryone/filament/Eryone Standard PLA.json
index 103bb592d5..5b06b12ef6 100644
--- a/resources/profiles/Eryone/filament/Eryone Standard PLA.json	
+++ b/resources/profiles/Eryone/filament/Eryone Standard PLA.json	
@@ -90,9 +90,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -165,9 +162,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json
index 26d223d2f1..c555d904dc 100644
--- a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json	
+++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json	
@@ -5,6 +5,7 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Eryone ER20",
+	"default_materials": "Generic PLA @System",
 	"name": "Eryone ER20",
 	"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
 	"type": "machine_model"
diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json
index 2dcf3d7882..11d48a7859 100644
--- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json	
+++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json	
@@ -6,6 +6,7 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Eryone ER20 Klipper",
+	"default_materials": "Generic PLA @System",
 	"name": "Eryone ER20 Klipper",
 	"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
 	"type": "machine_model",
diff --git a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json
index f45febbdbb..20f82b5fa9 100644
--- a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json	
+++ b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json	
@@ -182,7 +182,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Eryone/machine/Thinker X400.json b/resources/profiles/Eryone/machine/Thinker X400.json
index 8293d5693e..66bd0888de 100644
--- a/resources/profiles/Eryone/machine/Thinker X400.json	
+++ b/resources/profiles/Eryone/machine/Thinker X400.json	
@@ -8,5 +8,5 @@
 	"bed_model": "X400_bed.stl",
 	"bed_texture": "Thinker_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF"
+	"default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF;Eryone PLA @0.2 nozzle"
 }
diff --git a/resources/profiles/Eryone/machine/fdm_machine_common.json b/resources/profiles/Eryone/machine/fdm_machine_common.json
index 517cbdd10d..5d0c5e680c 100644
--- a/resources/profiles/Eryone/machine/fdm_machine_common.json
+++ b/resources/profiles/Eryone/machine/fdm_machine_common.json
@@ -141,7 +141,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json
index e6cb922e70..82df729a08 100644
--- a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json
+++ b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json
@@ -115,7 +115,6 @@
 	"retraction_speed": [
 		"25"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
index 6e0d263b6a..3152866ae3 100644
--- a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
+++ b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
@@ -132,7 +132,6 @@
 		"50"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json b/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json
index 588628cfab..311167c579 100644
--- a/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json	
+++ b/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json	
@@ -113,7 +113,6 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json
index bb5638f010..158064d7bb 100644
--- a/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json	
+++ b/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json	
@@ -1,12 +1,13 @@
 {
+	"type": "process",
+	"name": "0.12mm High Quality @Eryone ER20",
+	"inherits": "fdm_process_ER20_0.12",
+	"from": "system",
+	"setting_id": "H7ODK5fAAYDUoeSH",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Eryone ER20 0.4 nozzle"
 	],
-	"from": "system",
-	"inherits": "fdm_process_ER20_0.12",
-	"setting_id": "H7ODK5fAAYDUoeSH",
-	"instantiation": "true",
-	"name": "0.12mm High Quality @Eryone ER20",
 	"sparse_infill_pattern": "gyroid",
 	"overhang_1_4_speed": "60",
 	"overhang_2_4_speed": "30",
@@ -14,7 +15,5 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"type": "process"
+	"overhang_reverse_threshold": "50%"
 }
diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json
index c59e1da21f..413d651249 100644
--- a/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json	
+++ b/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json	
@@ -1,12 +1,13 @@
 {
+	"type": "process",
+	"name": "0.16mm Optimal @Eryone ER20",
+	"inherits": "fdm_process_ER20_0.16",
+	"from": "system",
+	"setting_id": "T7CLbKpkDxOdqBWk",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Eryone ER20 0.4 nozzle"
 	],
-	"from": "system",
-	"inherits": "fdm_process_ER20_0.16",
-	"setting_id": "T7CLbKpkDxOdqBWk",
-	"instantiation": "true",
-	"name": "0.16mm Optimal @Eryone ER20",
 	"sparse_infill_pattern": "gyroid",
 	"overhang_1_4_speed": "60",
 	"overhang_2_4_speed": "30",
@@ -14,7 +15,5 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"type": "process"
+	"overhang_reverse_threshold": "50%"
 }
diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json
index bd685a42c6..8fb5c24641 100644
--- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json	
+++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json	
@@ -1,12 +1,13 @@
 {
+	"type": "process",
+	"name": "0.12mm High Quality @Eryone ER20 Klipper",
+	"inherits": "fdm_process_ER20_Klipper_0.12",
+	"from": "system",
+	"setting_id": "FdNIlqPmjcMxniJL",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Eryone ER20 Klipper 0.4 nozzle"
 	],
-	"from": "system",
-	"inherits": "fdm_process_ER20_Klipper_0.12",
-	"setting_id": "FdNIlqPmjcMxniJL",
-	"instantiation": "true",
-	"name": "0.12mm High Quality @Eryone ER20 Klipper",
 	"sparse_infill_pattern": "gyroid",
 	"overhang_1_4_speed": "60",
 	"overhang_2_4_speed": "30",
@@ -14,7 +15,5 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"type": "process"
+	"overhang_reverse_threshold": "50%"
 }
diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json
index 0526d10668..8c3faa69d7 100644
--- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json	
+++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json	
@@ -1,12 +1,13 @@
 {
+	"type": "process",
+	"name": "0.16mm Optimal @Eryone ER20 Klipper",
+	"inherits": "fdm_process_ER20_Klipper_0.16",
+	"from": "system",
+	"setting_id": "T6D9ljLTeYJNh7LY",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Eryone ER20 Klipper 0.4 nozzle"
 	],
-	"from": "system",
-	"inherits": "fdm_process_ER20_Klipper_0.16",
-	"setting_id": "T6D9ljLTeYJNh7LY",
-	"instantiation": "true",
-	"name": "0.16mm Optimal @Eryone ER20 Klipper",
 	"sparse_infill_pattern": "gyroid",
 	"overhang_1_4_speed": "60",
 	"overhang_2_4_speed": "30",
@@ -14,7 +15,5 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
-	"type": "process"
+	"overhang_reverse_threshold": "50%"
 }
diff --git a/resources/profiles/Eryone/process/fdm_process_common.json b/resources/profiles/Eryone/process/fdm_process_common.json
index 3fd9decf3f..d724d1b629 100644
--- a/resources/profiles/Eryone/process/fdm_process_common.json
+++ b/resources/profiles/Eryone/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -78,7 +77,6 @@
 	"support_object_xy_distance": "2.5",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_surface_line_width": "0.4",
diff --git a/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json b/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json
index c4d744f31e..c628cbd726 100644
--- a/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json
+++ b/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json
@@ -5,7 +5,6 @@
 	"instantiation": "false",
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
-	"adaptive_layer_height": "0",
 	"alternate_extra_wall": "0",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
@@ -62,7 +61,6 @@
 	"inner_wall_line_width": "0.45",
 	"inner_wall_speed": "80",
 	"interface_shells": "0",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_bridge_angle": "0",
 	"internal_bridge_density": "100%",
 	"internal_bridge_flow": "1",
@@ -99,7 +97,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "1",
 	"precise_z_height": "1",
 	"preheat_time": "30",
@@ -131,7 +128,6 @@
 	"single_extruder_multi_material_priming": "1",
 	"single_loop_draft_shield": "0",
 	"skirt_loops": "0",
-	"smooth_coefficient": "80",
 	"slow_down_layers": "1",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json
index 1e0c76d458..36d0129015 100644
--- a/resources/profiles/FLSun.json
+++ b/resources/profiles/FLSun.json
@@ -1,6 +1,6 @@
 {
 	"name": "FLSun",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "FLSun configurations",
 	"machine_model_list": [
@@ -244,26 +244,10 @@
 			"name": "Generic PLA @FLSun S1",
 			"sub_path": "filament/Generic PLA @FLSun S1.json"
 		},
-		{
-			"name": "Generic PLA High Speed @FLSun S1",
-			"sub_path": "filament/Generic PLA High Speed @FLSun S1.json"
-		},
-		{
-			"name": "Generic PLA Silk @FLSun S1",
-			"sub_path": "filament/Generic PLA Silk @FLSun S1.json"
-		},
 		{
 			"name": "Generic PLA @FLSun T1",
 			"sub_path": "filament/Generic PLA @FLSun T1.json"
 		},
-		{
-			"name": "Generic PLA High Speed @FLSun T1",
-			"sub_path": "filament/Generic PLA High Speed @FLSun T1.json"
-		},
-		{
-			"name": "Generic PLA Silk @FLSun T1",
-			"sub_path": "filament/Generic PLA Silk @FLSun T1.json"
-		},
 		{
 			"name": "Generic TPU @FLSun S1",
 			"sub_path": "filament/Generic TPU @FLSun S1.json"
@@ -271,6 +255,22 @@
 		{
 			"name": "Generic TPU @FLSun T1",
 			"sub_path": "filament/Generic TPU @FLSun T1.json"
+		},
+		{
+			"name": "Generic PLA High Speed @FLSun S1",
+			"sub_path": "filament/Generic PLA High Speed @FLSun S1.json"
+		},
+		{
+			"name": "Generic PLA High Speed @FLSun T1",
+			"sub_path": "filament/Generic PLA High Speed @FLSun T1.json"
+		},
+		{
+			"name": "Generic PLA Silk @FLSun S1",
+			"sub_path": "filament/Generic PLA Silk @FLSun S1.json"
+		},
+		{
+			"name": "Generic PLA Silk @FLSun T1",
+			"sub_path": "filament/Generic PLA Silk @FLSun T1.json"
 		}
 	],
 	"machine_list": [
diff --git a/resources/profiles/FLSun/machine/fdm_machine_common.json b/resources/profiles/FLSun/machine/fdm_machine_common.json
index df5041bb50..11f5a9e934 100644
--- a/resources/profiles/FLSun/machine/fdm_machine_common.json
+++ b/resources/profiles/FLSun/machine/fdm_machine_common.json
@@ -126,7 +126,6 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json
index 6279861202..0b5512970a 100644
--- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json	
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "pIcVuwwQ8EWmPKgZ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.08",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json
index 391b7743a1..90320d5dc3 100644
--- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json	
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Ypz6DmDfVK0nHsGe",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.08",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json
index 03a66178ad..9b4585d43c 100644
--- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "WMx2mtWIuLTNAPHS",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.08",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json
index 5c9f752ee6..a28bf094f4 100644
--- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json	
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "TZdqXwp7bC2m9tpO",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json
index 2d5e2ab82b..45f0558cae 100644
--- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json	
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "HVdXArEX5vgTZkQK",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json
index 6b33217ea2..df47580b4d 100644
--- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "tqesgSzTbrfXG1mY",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json
index d9c7f3799b..f6796345a4 100644
--- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json	
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "CUzDbhgZMATkwFSg",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json
index a4ec969711..692b394d94 100644
--- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json	
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "FV3PZ6zjZP5chJlp",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json
index 478126620d..41627d8ab0 100644
--- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "EzioqGPSbnBNftNw",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json
index 66b5bc2fe6..f6a220ad6c 100644
--- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json	
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "PjpsLsUYSt1jfY7G",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json
index 92ef6cc2e4..578adb54ee 100644
--- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json	
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "9mHQwwo6UoNaD07z",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json
index 3ab6730d9c..db0a84e5f7 100644
--- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ehSWBo2Q9G7QS3Wt",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.24",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json
index 2c2f123e71..c729094bb6 100644
--- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json	
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "iEXqwmSaxdLWpN8K",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json
index e1e50c074e..356c2830c9 100644
--- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json	
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fJPwsjRdFJRka84X",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json
index 1c1917adc2..387fe3edb3 100644
--- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "kOtY4iPbqQlkQPef",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/FLSun/process/fdm_process_common.json b/resources/profiles/FLSun/process/fdm_process_common.json
index 8371968b2e..47666d8d16 100644
--- a/resources/profiles/FLSun/process/fdm_process_common.json
+++ b/resources/profiles/FLSun/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -78,7 +77,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_surface_line_width": "0.4",
diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json
index f3923c435a..5bccaf9dfb 100644
--- a/resources/profiles/Flashforge.json
+++ b/resources/profiles/Flashforge.json
@@ -1,7 +1,7 @@
 {
 	"name": "Flashforge",
 	"url": "",
-	"version": "02.04.00.05",
+	"version": "02.04.00.08",
 	"force_update": "0",
 	"description": "Flashforge configurations",
 	"machine_model_list": [
@@ -511,6 +511,22 @@
 			"name": "0.42mm Draft @FF AD5X 0.6 nozzle",
 			"sub_path": "process/0.42mm Draft @FF AD5X 0.6 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.08mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.10mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.12mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.12mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.14mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.14mm Standard @FF C5 0.25 nozzle.json"
+		},
 		{
 			"name": "0.24mm Fine @FF AD5X 0.8 nozzle",
 			"sub_path": "process/0.24mm Fine @FF AD5X 0.8 nozzle.json"
@@ -557,26 +573,30 @@
 			"name": "Generic ASA @Flashforge",
 			"sub_path": "filament/Generic ASA @Flashforge.json"
 		},
-		{
-			"name": "Generic PETG @Flashforge",
-			"sub_path": "filament/Generic PETG @Flashforge.json"
-		},
-		{
-			"name": "Generic PETG-CF10 @Flashforge",
-			"sub_path": "filament/Generic PETG-CF10 @Flashforge.json"
-		},
 		{
 			"name": "Flashforge PETG",
 			"sub_path": "filament/Flashforge/Flashforge PETG @FF AD3.json"
 		},
+		{
+			"name": "Generic PETG @Flashforge",
+			"sub_path": "filament/Generic PETG @Flashforge.json"
+		},
 		{
 			"name": "Generic PETG @Flashforge Artemis",
 			"sub_path": "filament/Flashforge Generic PETG @Flashforge Artemis.json"
 		},
+		{
+			"name": "Generic PETG-CF10 @Flashforge",
+			"sub_path": "filament/Generic PETG-CF10 @Flashforge.json"
+		},
 		{
 			"name": "SUNLU PETG @base",
 			"sub_path": "filament/SUNLU/SUNLU PETG @base.json"
 		},
+		{
+			"name": "Flashforge PLA",
+			"sub_path": "filament/Flashforge/Flashforge PLA @FF AD3.json"
+		},
 		{
 			"name": "Generic HS PLA @Flashforge",
 			"sub_path": "filament/Generic HS PLA @Flashforge.json"
@@ -593,10 +613,6 @@
 			"name": "Generic PLA-Silk @Flashforge",
 			"sub_path": "filament/Generic PLA-Silk @Flashforge.json"
 		},
-		{
-			"name": "Flashforge PLA",
-			"sub_path": "filament/Flashforge/Flashforge PLA @FF AD3.json"
-		},
 		{
 			"name": "SUNLU PLA Marble @base",
 			"sub_path": "filament/SUNLU/SUNLU PLA Marble @base.json"
@@ -693,6 +709,10 @@
 			"name": "Generic ABS @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Generic ABS @FF AD5M 0.25 Nozzle.json"
 		},
+		{
+			"name": "Generic ABS @Flashforge AD4",
+			"sub_path": "filament/Generic ABS @Flashforge AD4.json"
+		},
 		{
 			"name": "Generic ABS @Flashforge G3U",
 			"sub_path": "filament/Generic ABS @Flashforge G3U.json"
@@ -713,10 +733,6 @@
 			"name": "Generic HIPS @Flashforge G3U 0.6 Nozzle",
 			"sub_path": "filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json"
 		},
-		{
-			"name": "Generic ABS @Flashforge AD4",
-			"sub_path": "filament/Generic ABS @Flashforge AD4.json"
-		},
 		{
 			"name": "Flashforge ASA @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json"
@@ -729,41 +745,13 @@
 			"name": "Generic ASA @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Generic ASA @FF AD5M 0.25 Nozzle.json"
 		},
-		{
-			"name": "Generic ASA @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json"
-		},
 		{
 			"name": "Generic ASA @Flashforge AD4",
 			"sub_path": "filament/Generic ASA @Flashforge AD4.json"
 		},
 		{
-			"name": "Generic PETG @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PETG @FF AD5M 0.25 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U",
-			"sub_path": "filament/Generic PETG @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json"
+			"name": "Generic ASA @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json"
 		},
 		{
 			"name": "Flashforge HS PETG",
@@ -889,10 +877,38 @@
 			"name": "FusRock S-PAHT @G3U 0.6 Nozzle",
 			"sub_path": "filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json"
 		},
+		{
+			"name": "Generic PETG @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PETG @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PETG @Flashforge AD4",
 			"sub_path": "filament/Generic PETG @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PETG @Flashforge G3U",
+			"sub_path": "filament/Generic PETG @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PETG @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json"
+		},
 		{
 			"name": "Flashforge PETG-CF",
 			"sub_path": "filament/Flashforge PETG-CF.json"
@@ -929,10 +945,6 @@
 			"name": "SUNLU PETG @FF AD5M 0.8 Nozzle",
 			"sub_path": "filament/SUNLU/SUNLU PETG @FF AD5M 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic HS PLA @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic HS PLA @FF AD5M 0.25 Nozzle.json"
-		},
 		{
 			"name": "Flashforge HIPS @FF G4",
 			"sub_path": "filament/Flashforge HIPS @FF G4.json"
@@ -1033,42 +1045,14 @@
 			"name": "Flashforge PLA-CF @FF G4P",
 			"sub_path": "filament/Flashforge PLA-CF @FF G4P.json"
 		},
+		{
+			"name": "Generic HS PLA @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic HS PLA @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PLA High Speed @Flashforge AD4",
 			"sub_path": "filament/Generic PLA High Speed @Flashforge AD4.json"
 		},
-		{
-			"name": "Generic PLA @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PLA @FF AD5M 0.25 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U",
-			"sub_path": "filament/Generic PLA @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PVA @Flashforge",
-			"sub_path": "filament/Generic PVA @Flashforge.json"
-		},
 		{
 			"name": "Flashforge HS PLA",
 			"sub_path": "filament/Flashforge HS PLA.json"
@@ -1217,10 +1201,42 @@
 			"name": "Flashforge PLA Sparkle @FF AD5X 0.8 nozzle",
 			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic PLA @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PLA @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PLA @Flashforge AD4",
 			"sub_path": "filament/Generic PLA @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PLA @Flashforge G3U",
+			"sub_path": "filament/Generic PLA @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PLA @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PVA @Flashforge",
+			"sub_path": "filament/Generic PVA @Flashforge.json"
+		},
 		{
 			"name": "Polymaker CoPA",
 			"sub_path": "filament/Polymaker/Polymaker CoPA.json"
@@ -1281,10 +1297,6 @@
 			"name": "Generic PLA-CF10 @Flashforge AD4",
 			"sub_path": "filament/Generic PLA-CF10 @Flashforge AD4.json"
 		},
-		{
-			"name": "Generic PLA-SILK @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PLA-SILK @FF AD5M 0.25 Nozzle.json"
-		},
 		{
 			"name": "Flashforge PLA Silk",
 			"sub_path": "filament/Flashforge PLA Silk.json"
@@ -1309,6 +1321,10 @@
 			"name": "Generic PLA Silk @Flashforge AD4",
 			"sub_path": "filament/Generic PLA Silk @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PLA-SILK @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PLA-SILK @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "SUNLU PLA Marble @FF AD3",
 			"sub_path": "filament/SUNLU/SUNLU PLA Marble @FF AD3.json"
@@ -1693,102 +1709,6 @@
 			"name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle",
 			"sub_path": "filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json"
 		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG-CF @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG-CF @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json"
-		},
 		{
 			"name": "Flashforge HS PETG @FF AD5M 0.25 nozzle",
 			"sub_path": "filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json"
@@ -2029,6 +1949,254 @@
 			"name": "Polymaker CoPA @FF G4P 0.8 HF nozzle",
 			"sub_path": "filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json"
 		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG-CF @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG-CF @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json"
+		},
 		{
 			"name": "Flashforge HS PLA @FF G4 0.6 HF nozzle",
 			"sub_path": "filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json"
@@ -2325,158 +2493,6 @@
 			"name": "Flashforge PLA-CF @FF G4P 0.6 nozzle",
 			"sub_path": "filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json"
 		},
-		{
-			"name": "Flashforge HS PLA @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PLA @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json"
-		},
 		{
 			"name": "Flashforge PLA Silk @FF AD5M 0.25 nozzle",
 			"sub_path": "filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json"
@@ -2585,30 +2601,6 @@
 			"name": "Flashforge PETG-CF @FF C5P",
 			"sub_path": "filament/Flashforge PETG-CF @FF C5P.json"
 		},
-		{
-			"name": "Flashforge PLA Matte @FF C5",
-			"sub_path": "filament/Flashforge PLA Matte @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF C5P",
-			"sub_path": "filament/Flashforge PLA Matte @FF C5P.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF C5",
-			"sub_path": "filament/Flashforge PLA Metal @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF C5P",
-			"sub_path": "filament/Flashforge PLA Metal @FF C5P.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF C5",
-			"sub_path": "filament/Flashforge PLA Pro @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF C5P",
-			"sub_path": "filament/Flashforge PLA Pro @FF C5P.json"
-		},
 		{
 			"name": "Flashforge PLA Basic @FF C5",
 			"sub_path": "filament/Flashforge PLA Basic @FF C5.json"
@@ -2641,6 +2633,30 @@
 			"name": "Flashforge PLA Luminous @FF C5P",
 			"sub_path": "filament/Flashforge PLA Luminous @FF C5P.json"
 		},
+		{
+			"name": "Flashforge PLA Matte @FF C5",
+			"sub_path": "filament/Flashforge PLA Matte @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF C5P",
+			"sub_path": "filament/Flashforge PLA Matte @FF C5P.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF C5",
+			"sub_path": "filament/Flashforge PLA Metal @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF C5P",
+			"sub_path": "filament/Flashforge PLA Metal @FF C5P.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF C5",
+			"sub_path": "filament/Flashforge PLA Pro @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF C5P",
+			"sub_path": "filament/Flashforge PLA Pro @FF C5P.json"
+		},
 		{
 			"name": "Flashforge PLA Silk @FF C5",
 			"sub_path": "filament/Flashforge PLA Silk @FF C5.json"
@@ -2903,6 +2919,10 @@
 			"name": "Flashforge AD5X 0.4 nozzle",
 			"sub_path": "machine/Flashforge AD5X 0.4 nozzle.json"
 		},
+		{
+			"name": "Flashforge Creator 5 0.25 nozzle",
+			"sub_path": "machine/Flashforge Creator 5 0.25 nozzle.json"
+		},
 		{
 			"name": "Flashforge Creator 5 0.4 nozzle",
 			"sub_path": "machine/Flashforge Creator 5 0.4 nozzle.json"
@@ -2915,6 +2935,10 @@
 			"name": "Flashforge Creator 5 0.8 nozzle",
 			"sub_path": "machine/Flashforge Creator 5 0.8 nozzle.json"
 		},
+		{
+			"name": "Flashforge Creator 5 Pro 0.25 nozzle",
+			"sub_path": "machine/Flashforge Creator 5 Pro 0.25 nozzle.json"
+		},
 		{
 			"name": "Flashforge Creator 5 Pro 0.4 nozzle",
 			"sub_path": "machine/Flashforge Creator 5 Pro 0.4 nozzle.json"
diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json
index 955235b442..3534f1a60b 100644
--- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json	
@@ -87,6 +87,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	]
diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json
index 82a8dc096a..263224a1ea 100644
--- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json	
@@ -93,6 +93,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	],
diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json
index d1c404cd19..8308064c52 100644
--- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json	
@@ -90,6 +90,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	]
diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json
index 1385ac8454..d8bdc53caa 100644
--- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json	
@@ -96,6 +96,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	],
diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json
index 2736fea042..f38a075dea 100644
--- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json	
@@ -90,6 +90,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	]
diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json
index bc6fbecdb4..c920f757e5 100644
--- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json	
@@ -96,6 +96,12 @@
 	"support_material_interface_fan_speed": [
 		"90"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"temperature_vitrification": [
 		"70"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json
index c1d48bf1ff..6d4221e732 100644
--- a/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json	
+++ b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json	
@@ -15,9 +15,6 @@
 	"during_print_exhaust_fan_speed": [
 		"40"
 	],
-	"filament_load_time": [
-		"29"
-	],
 	"filament_max_volumetric_speed": [
 		"12"
 	],
@@ -33,9 +30,6 @@
 	"filament_type": [
 		"PET"
 	],
-	"filament_unload_time": [
-		"29"
-	],
 	"compatible_printers": [
 		"Flashforge Guider4 Pro 0.8 HF nozzle"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json b/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json
index 249060ab5c..f228bdd769 100644
--- a/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json	
+++ b/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "FusRock NexPA-CF25",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "FusRock Generic NexPA-CF25",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "sVoga8454H2oKuKI",
 	"filament_id": "OFjt8dDO",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PA-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json
index d47b7f865c..3666353817 100644
--- a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json	
+++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "FusRock PAHT-CF",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "FusRock Generic PAHT-CF",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "OGhhxVvR4O4VYuCK",
 	"filament_id": "OFKW5hEW",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"PAHT-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json
index 4dee20a476..5de8912224 100644
--- a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json	
+++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "FusRock PET-CF",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "FusRock Generic PET-CF",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "nGtsrswmS2Fj4Uev",
 	"filament_id": "OFDu1qE7",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"PET-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json
index 895d10aa12..e6f32aace1 100644
--- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json	
+++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "FusRock S-Multi",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "FusRock Generic S-Multi",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "zAqGdmTsz4Z0qbaa",
 	"filament_id": "OF0AquDh",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json
index 792b12c949..ebe48dc6dd 100644
--- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json	
+++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "FusRock S-PAHT",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "FusRock Generic S-PAHT",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "mBQzgKKsV8Qo3gAr",
 	"filament_id": "OFCn83wF",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PAHT"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json
index 8422875984..a429c5be48 100644
--- a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Flashforge G3U",
-	"inherits": "Generic ABS @Flashforge",
 	"renamed_from": "Flashforge Generic ABS @G3U;Flashforge Generic ABS G3U",
+	"inherits": "Generic ABS @Flashforge",
 	"from": "system",
 	"setting_id": "dxCNYDhcaJqAfDpR",
 	"filament_id": "OFY9muEs",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"ABS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json
index 42f9b00a60..07aae7b634 100644
--- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json	
+++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json	
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"0"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "40",
 	"close_fan_the_first_x_layers": [
 		"2"
diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json
index 20a3e61da2..cfb156dd52 100644
--- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Flashforge G3U",
-	"inherits": "Generic ABS @Flashforge",
 	"renamed_from": "Flashforge Generic ASA @G3U;Flashforge Generic ASA G3U",
+	"inherits": "Generic ABS @Flashforge",
 	"from": "system",
 	"setting_id": "N1vm5hhMHdSNvUwk",
 	"filament_id": "OFLPAxz3",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"ASA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json
index b80ad322c3..cc73a2a479 100644
--- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Flashforge",
-	"inherits": "fdm_filament_asa",
 	"renamed_from": "Flashforge Generic ASA",
+	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "tzs0HcyEZow99A2J",
 	"filament_id": "OFLPAxz3",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"0"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"2"
diff --git a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json
index 3012161923..54badf52ae 100644
--- a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic HIPS @Flashforge",
-	"inherits": "Generic ABS @Flashforge",
 	"renamed_from": "Flashforge Generic HIPS",
+	"inherits": "Generic ABS @Flashforge",
 	"from": "system",
 	"setting_id": "zMQa7Squ3p3jKYwB",
 	"filament_id": "OFsFon5l",
@@ -96,9 +96,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -171,9 +168,6 @@
 	"filament_type": [
 		"HIPS"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json
index b6b4f26221..7fabff8e93 100644
--- a/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json	
@@ -1,15 +1,12 @@
 {
 	"type": "filament",
 	"name": "Generic HS PLA @Flashforge",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Flashforge Generic HS PLA",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "GTqLzBcGP2Rmmc9X",
 	"filament_id": "OFvxghTE",
 	"instantiation": "true",
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -90,9 +87,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -165,9 +159,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json
index 119b9e3349..9c37ea85a7 100644
--- a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Flashforge G3U",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "Flashforge Generic PETG @G3U;Flashforge Generic PETG G3U",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "umrO2bL7ihLROx0B",
 	"filament_id": "OFYPdQJh",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PETG"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json
index d298fa5b12..2464363ce9 100644
--- a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG-CF @Flashforge G3U",
-	"inherits": "Generic PETG @Flashforge",
 	"renamed_from": "Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG-CF G3U",
+	"inherits": "Generic PETG @Flashforge",
 	"from": "system",
 	"setting_id": "XXoNSerT8aqG5dlL",
 	"filament_id": "OFoYSJKi",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PETG-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json
index bcf3f0926c..b310bf8d5b 100644
--- a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json	
+++ b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json	
@@ -9,9 +9,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json
index ca45c4fe25..8908c41081 100644
--- a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG-CF10 @Flashforge",
-	"inherits": "fdm_filament_pet",
 	"renamed_from": "Flashforge Generic PETG-CF10",
+	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "0oCfWHsyqpBCbD62",
 	"filament_id": "OFO5djrM",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json
index b0c0ce9597..20f0ba7403 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json	
@@ -3,7 +3,8 @@
 	"name": "Generic PLA @Flashforge G3U 0.6 Nozzle",
 	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
-	"instantiation": "false",
+	"setting_id": "YSbpdZWmgTvjJmZZ",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Flashforge Guider 3 Ultra 0.6 Nozzle"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json
index 49aa73c7eb..6a9af67be1 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json	
@@ -3,7 +3,8 @@
 	"name": "Generic PLA @Flashforge G3U 0.8 Nozzle",
 	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
-	"instantiation": "false",
+	"setting_id": "CsPPXQWXhwz5fUww",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Flashforge Guider 3 Ultra 0.8 Nozzle"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json
index 48b66814ca..630c4c723b 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Flashforge G3U",
-	"inherits": "Generic PLA @Flashforge",
 	"renamed_from": "Flashforge Generic PLA @G3U;Flashforge Generic PLA G3U",
+	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
 	"setting_id": "8ZlELnZzCa3UsztB",
 	"filament_id": "OFDSrzZ8",
@@ -24,8 +24,6 @@
 	],
 	"compatible_printers": [
 		"Flashforge Guider 3 Ultra 0.4 Nozzle",
-		"Flashforge Guider 3 Ultra 0.6 Nozzle",
-		"Flashforge Guider 3 Ultra 0.8 Nozzle",
 		"Flashforge Guider 2s 0.4 nozzle"
 	],
 	"compatible_printers_condition": "",
@@ -97,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -172,9 +167,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json
index 85741e007d..eb4e1ec0ec 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json	
@@ -6,9 +6,6 @@
 	"setting_id": "B4EWBUa9G36lZUd7",
 	"filament_id": "OFmpMwxS",
 	"instantiation": "true",
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -84,9 +81,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -159,9 +153,6 @@
 	"filament_type": [
 		"PLA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json
index 7f79c0753e..595ca9e63d 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA-CF @Flashforge G3U",
-	"inherits": "Generic PLA @Flashforge",
 	"renamed_from": "Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA-CF G3U",
+	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
 	"setting_id": "J2zu45Q3zu7Tor3W",
 	"filament_id": "OFWbdGsC",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json
index c03c616a0e..d1c860e830 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json	
@@ -9,9 +9,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -86,9 +83,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -161,9 +155,6 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json
index 8b2e1efb14..06307637e7 100644
--- a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA-CF10 @Flashforge",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Flashforge Generic PLA-CF10",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "cckB4CXjFwZKC0l0",
 	"filament_id": "OFX2zcrM",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -90,9 +87,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -165,9 +159,6 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json
index 6c76493158..92c2a5e54a 100644
--- a/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PVA @Flashforge",
-	"inherits": "Generic PLA @Flashforge",
 	"renamed_from": "Flashforge Generic PVA",
+	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
 	"setting_id": "yiCXuEb87vNMhytL",
 	"filament_id": "OFDvXujf",
@@ -97,9 +97,6 @@
 	"filament_is_support": [
 		"1"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -172,9 +169,6 @@
 	"filament_type": [
 		"PVA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"35"
 	],
diff --git a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json
index 610777d347..4fb3c96b08 100644
--- a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json	
+++ b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json	
@@ -9,9 +9,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json
index 45a6b2e6f9..5ebb19eb68 100644
--- a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json	
+++ b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic TPU @Flashforge",
-	"inherits": "fdm_filament_tpu",
 	"renamed_from": "Flashforge Generic TPU",
+	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "luh9xN4STlD0sTyt",
 	"filament_id": "OFgbpcy9",
@@ -10,9 +10,6 @@
 	"additional_cooling_fan_speed": [
 		"100"
 	],
-	"bed_temperature_difference": [
-		"10"
-	],
 	"chamber_temperature": "0",
 	"close_fan_the_first_x_layers": [
 		"1"
diff --git a/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json b/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json
index 533af6688b..77a59b4bbf 100644
--- a/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json	
+++ b/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Polymaker CoPA",
-	"inherits": "Generic PLA @Flashforge",
 	"renamed_from": "Polymaker Generic CoPA",
+	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
 	"setting_id": "5Dt1APJ8qd5pzmzK",
 	"filament_id": "OFQyyO0l",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"30"
 	],
diff --git a/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json b/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json
index c7eb2fb58c..91e636a3d4 100644
--- a/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json	
+++ b/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Polymaker S1",
-	"inherits": "Generic PLA @Flashforge",
 	"renamed_from": "Polymaker Generic S1",
+	"inherits": "Generic PLA @Flashforge",
 	"from": "system",
 	"setting_id": "auChFegT1xViXxGe",
 	"filament_id": "OFaDsTE0",
@@ -95,9 +95,6 @@
 	"filament_is_support": [
 		"1"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -170,9 +167,6 @@
 	"filament_type": [
 		"PA"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"30"
 	],
diff --git a/resources/profiles/Flashforge/filament/fdm_filament_pet.json b/resources/profiles/Flashforge/filament/fdm_filament_pet.json
index 678ab77822..a19e1faece 100644
--- a/resources/profiles/Flashforge/filament/fdm_filament_pet.json
+++ b/resources/profiles/Flashforge/filament/fdm_filament_pet.json
@@ -28,6 +28,12 @@
 	"textured_plate_temp_initial_layer": [
 		"85"
 	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
 	"slow_down_for_layer_cooling": [
 		"1"
 	],
diff --git a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json
index 50a7d88ff5..6d03066d38 100644
--- a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json	
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json
index 9dcd0f86dd..682594f99a 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json	
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json
index a88cbb9e80..ff7251562e 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json	
@@ -199,7 +199,6 @@
 		"35"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json
index 47ac21c2ec..806e5cda1f 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json	
@@ -199,7 +199,6 @@
 		"35"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X.json b/resources/profiles/Flashforge/machine/Flashforge AD5X.json
index 42cfac7967..cd36362249 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "flashforge_ad5x_buildplate_texture.svg",
 	"hotend_model": "flashforge_adventurer_5m_series_hotend.STL",
 	"url": "",
-	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge"
+	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json
index 8c5f7ec4bf..d9864c599d 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json	
@@ -2,6 +2,7 @@
 	"type": "machine_model",
 	"name": "Flashforge Adventurer 4 Series",
 	"model_id": "Flashforge Adventurer 4 Series",
+	"default_materials": "Generic PLA @Flashforge AD4;Generic PLA High Speed @Flashforge AD4",
 	"nozzle_diameter": "0.3;0.4;0.6;0.4HS",
 	"machine_tech": "FFF",
 	"family": "Flashforge",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json
index 476d036a95..45023ac132 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "flashforge_adventurer5m_buildplate_texture.svg",
 	"default_bed_type": "Textured PEI Plate",
 	"hotend_model": "flashforge_adventurer_5m_series_hotend.STL",
-	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge"
+	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json
index b69dc12126..9d4de80c6e 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json	
@@ -9,5 +9,5 @@
 	"bed_texture": "flashforge_adventurer5m_buildplate_texture.svg",
 	"default_bed_type": "Textured PEI Plate",
 	"hotend_model": "flashforge_adventurer_5m_series_hotend.STL",
-	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge"
+	"default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Artemis.json b/resources/profiles/Flashforge/machine/Flashforge Artemis.json
index 22e9963a24..069a71de70 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Artemis.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Artemis.json	
@@ -2,6 +2,7 @@
 	"type": "machine_model",
 	"name": "Flashforge Artemis",
 	"model_id": "Flashforge-Artemis",
+	"default_materials": "Generic PETG @Flashforge Artemis",
 	"nozzle_diameter": "0.4",
 	"machine_tech": "FFF",
 	"family": "Flashforge",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json
new file mode 100644
index 0000000000..c3cb7aa570
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json	
@@ -0,0 +1,310 @@
+{
+	"type": "machine",
+	"name": "Flashforge Creator 5 0.25 nozzle",
+	"inherits": "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+	"from": "system",
+	"setting_id": "xp3cpTEGYdWjcrMM",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"default_bed_type": "",
+	"default_filament_profile": [
+		"Generic PLA @Flashforge"
+	],
+	"default_print_profile": "0.12mm Standard @FF C5 0.25 nozzle",
+	"deretraction_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"disable_m73": "1",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "360",
+	"extruder_clearance_height_to_rod": "60",
+	"extruder_clearance_radius": "92",
+	"extruder_colour": [
+		"#FCE94F",
+		"#FCE94F",
+		"#FCE94F",
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0",
+		"0x0",
+		"0x0",
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"300",
+		"500"
+	],
+	"machine_max_jerk_e": [
+		"2.5",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_y": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_z": [
+		"3",
+		"3"
+	],
+	"machine_max_junction_deviation": [
+		"0",
+		"0"
+	],
+	"machine_max_speed_e": [
+		"30",
+		"30"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_z": [
+		"20",
+		"20"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M25",
+	"machine_start_gcode": ";start_gcode\nM140 S[bed_temperature_initial_layer_single]\nM106 P101 S0 ; L+R_PLA_Turbo_Fan_0-255\nM106 P2 S0 ; Center_Fresch_Air_Input_Fan_for_PLA30%_(80_0-255) \nM191 S0 ; Chamber temp. max65C\nM106 S0 ; Model_Fan_(Heat_Break_Cooler_80-255)100%=255\nM106 P3 S0 ; Filter_Unit_Fan_0-255(ABS=255)\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F2400\nT[initial_extruder]\nM109 S[nozzle_temperature_initial_layer] T[initial_extruder]\nG1 X256 Y0 Z0.2 F6000\nG1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\nG1 X216 E10 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n;start_gcode end",
+	"machine_tool_change_time": "7",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.14",
+		"0.14",
+		"0.14",
+		"0.14"
+	],
+	"max_resonance_avoidance_speed": "120",
+	"min_layer_height": [
+		"0.08",
+		"0.08",
+		"0.08",
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "70",
+	"nozzle_diameter": [
+		"0.25",
+		"0.25",
+		"0.25",
+		"0.25"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printable_area": [
+		"0x0",
+		"256x0",
+		"256x256",
+		"0x256"
+	],
+	"printable_height": "256",
+	"printer_model": "Flashforge Creator 5",
+	"printer_notes": "",
+	"printer_settings_id": "Flashforge Creator 5 0.25 nozzle",
+	"printer_structure": "corexy",
+	"printer_technology": "FFF",
+	"printer_variant": "0.25",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"100%",
+		"100%",
+		"100%",
+		"100%"
+	],
+	"retract_length_toolchange": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"retract_lift_above": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_lift_below": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces",
+		"All Surfaces",
+		"All Surfaces",
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"-0.8",
+		"-0.8",
+		"-0.8",
+		"-0.8"
+	],
+	"retract_when_changing_layer": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"retraction_length": [
+		"0.8",
+		"0.8",
+		"0.8",
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"retraction_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"thumbnails": "140x110/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"wipe_distance": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"z_hop": [
+		"0.4",
+		"0.4",
+		"0.4",
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift",
+		"Auto Lift",
+		"Auto Lift",
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json
index 5ffbd6a7fc..474e697fa1 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json
index ce7727209f..a10c65d83e 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json
index e747961d1e..0e3a29a2ad 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json
new file mode 100644
index 0000000000..911c09f29c
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json	
@@ -0,0 +1,310 @@
+{
+	"type": "machine",
+	"name": "Flashforge Creator 5 Pro 0.25 nozzle",
+	"inherits": "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+	"from": "system",
+	"setting_id": "rpmib7bIKa85LNMR",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "1",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"default_bed_type": "",
+	"default_filament_profile": [
+		"Generic PLA @Flashforge"
+	],
+	"default_print_profile": "0.12mm Standard @FF C5 0.25 nozzle",
+	"deretraction_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"disable_m73": "1",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "360",
+	"extruder_clearance_height_to_rod": "60",
+	"extruder_clearance_radius": "92",
+	"extruder_colour": [
+		"#FCE94F",
+		"#FCE94F",
+		"#FCE94F",
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0",
+		"0x0",
+		"0x0",
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"30000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"300",
+		"500"
+	],
+	"machine_max_jerk_e": [
+		"2.5",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_y": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_z": [
+		"3",
+		"3"
+	],
+	"machine_max_junction_deviation": [
+		"0",
+		"0"
+	],
+	"machine_max_speed_e": [
+		"30",
+		"30"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_z": [
+		"20",
+		"20"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M25",
+	"machine_start_gcode": ";start_gcode\nM140 S[bed_temperature_initial_layer_single]\nM106 P101 S0 ; L+R_PLA_Turbo_Fan_0-255\nM106 P2 S0 ; Center_Fresch_Air_Input_Fan_for_PLA30%_(80_0-255) \nM191 S0 ; Chamber temp. max65C\nM106 S0 ; Model_Fan_(Heat_Break_Cooler_80-255)100%=255\nM106 P3 S0 ; Filter_Unit_Fan_0-255(ABS=255)\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F2400\nT[initial_extruder]\nM109 S[nozzle_temperature_initial_layer] T[initial_extruder]\nG1 X256 Y0 Z0.2 F6000\nG1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\nG1 X216 E10 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n;start_gcode end",
+	"machine_tool_change_time": "7",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.14",
+		"0.14",
+		"0.14",
+		"0.14"
+	],
+	"max_resonance_avoidance_speed": "120",
+	"min_layer_height": [
+		"0.08",
+		"0.08",
+		"0.08",
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "70",
+	"nozzle_diameter": [
+		"0.25",
+		"0.25",
+		"0.25",
+		"0.25"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printable_area": [
+		"0x0",
+		"256x0",
+		"256x256",
+		"0x256"
+	],
+	"printable_height": "256",
+	"printer_model": "Flashforge Creator 5 Pro",
+	"printer_notes": "",
+	"printer_settings_id": "Flashforge Creator 5 Pro 0.25 nozzle",
+	"printer_structure": "corexy",
+	"printer_technology": "FFF",
+	"printer_variant": "0.25",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"100%",
+		"100%",
+		"100%",
+		"100%"
+	],
+	"retract_length_toolchange": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"retract_lift_above": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_lift_below": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces",
+		"All Surfaces",
+		"All Surfaces",
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"-0.8",
+		"-0.8",
+		"-0.8",
+		"-0.8"
+	],
+	"retract_when_changing_layer": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"retraction_length": [
+		"0.8",
+		"0.8",
+		"0.8",
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"retraction_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"thumbnails": "140x110/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"wipe_distance": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"z_hop": [
+		"0.4",
+		"0.4",
+		"0.4",
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift",
+		"Auto Lift",
+		"Auto Lift",
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json
index 620fb3dec3..ec69837a3a 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json
index 43c07989c6..d3d189d4e9 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json
index 71d101c355..e596675ad0 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json	
@@ -264,7 +264,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json
index bf8cbf3702..c33735a4bb 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json	
@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Flashforge Creator 5 Pro",
 	"model_id": "Flashforge-Creator-5-Pro",
-	"nozzle_diameter": "0.4;0.6;0.8",
+	"nozzle_diameter": "0.25;0.4;0.6;0.8",
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
 	"bed_texture": "flashforge_c5_buildplate_texture.png",
 	"hotend_model": "",
-	"default_materials": ""
+	"default_materials": "Generic PLA @System;Generic PLA @FF C5P"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json
index 8d5ac253b7..358cd4aaee 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json	
@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Flashforge Creator 5",
 	"model_id": "Flashforge-Creator-5",
-	"nozzle_diameter": "0.4;0.6;0.8",
+	"nozzle_diameter": "0.25;0.4;0.6;0.8",
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
 	"bed_texture": "flashforge_c5_buildplate_texture.png",
 	"hotend_model": "",
-	"default_materials": ""
+	"default_materials": "Generic PLA @System;Generic PLA @FF C5"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json
index dcde8504e9..aeb84117fd 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json	
@@ -186,7 +186,6 @@
 		"35"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json
index a830f2db98..3b3aa553e7 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json	
@@ -8,5 +8,5 @@
 	"bed_model": "flashforge_g3u_buildplate_model.stl",
 	"bed_texture": "flashforge_g3u_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "FusRock NexPA-CF25;FusRock PAHT-CF;FusRock PAHT-CF @G3U 0.6 Nozzle;FusRock PET-CF;FusRock PET-CF @G3U 0.6 Nozzle;FusRock S-Multi;FusRock S-PAHT;Generic ABS @Flashforge G3U;Generic ABS @Flashforge G3U 0.6 Nozzle;Generic ASA @Flashforge G3U;Generic ASA @Flashforge G3U 0.6 Nozzle;Generic HIPS @Flashforge;Generic HIPS @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U;Generic PETG @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U 0.8 Nozzle;Generic PETG-CF @Flashforge G3U;Generic PETG-CF @Flashforge G3U 0.6 Nozzle;Generic PETG-CF @Flashforge G3U 0.8 Nozzle;Generic PLA @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA-CF @Flashforge G3U 0.6 Nozzle;Generic PLA-CF @Flashforge G3U 0.8 Nozzle;Generic PVA @Flashforge;Polymaker CoPA;Polymaker S1"
+	"default_materials": "FusRock NexPA-CF25;FusRock PAHT-CF;FusRock PAHT-CF @G3U 0.6 Nozzle;FusRock PET-CF;FusRock PET-CF @G3U 0.6 Nozzle;FusRock S-Multi;FusRock S-PAHT;Generic ABS @Flashforge G3U;Generic ABS @Flashforge G3U 0.6 Nozzle;Generic ASA @Flashforge G3U;Generic ASA @Flashforge G3U 0.6 Nozzle;Generic HIPS @Flashforge;Generic HIPS @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U;Generic PETG @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U 0.8 Nozzle;Generic PETG-CF @Flashforge G3U;Generic PETG-CF @Flashforge G3U 0.6 Nozzle;Generic PETG-CF @Flashforge G3U 0.8 Nozzle;Generic PLA @Flashforge G3U;Generic PLA @Flashforge G3U 0.6 Nozzle;Generic PLA @Flashforge G3U 0.8 Nozzle;Generic PLA-CF @Flashforge G3U;Generic PLA-CF @Flashforge G3U 0.6 Nozzle;Generic PLA-CF @Flashforge G3U 0.8 Nozzle;Generic PVA @Flashforge;Polymaker CoPA;Polymaker S1"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json
index b7a7d5f6ba..85efedf8f9 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge"
+		"Flashforge PLA Basic @FF G4 0.25 nozzle"
 	],
 	"default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
 	"deretraction_speed": [
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json
index f13d0aa125..b8e60f92d3 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U"
+		"Flashforge PLA Basic @FF G4 HF"
 	],
 	"default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json
index 22148f62db..f60d1df816 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge"
+		"Flashforge PLA Basic @FF G4"
 	],
 	"default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
 	"deretraction_speed": [
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json
index 4eb27093aa..38d0321592 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4 0.6 HF nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json
index 56a63623fd..ceece27959 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4 0.6 nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json
index 64853e95fa..35c85dc400 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4 0.8 HF nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json
index 4fbf0d684e..fdddbe17ed 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge"
+		"Flashforge PLA Basic @FF G4P 0.25 nozzle"
 	],
 	"default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
 	"deretraction_speed": [
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json
index 9c0b57c05c..7b3566197e 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U"
+		"Flashforge PLA Basic @FF G4P HF"
 	],
 	"default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json
index 58daabb444..3ea39fdb11 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge"
+		"Flashforge PLA Basic @FF G4P"
 	],
 	"default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
 	"deretraction_speed": [
@@ -199,7 +199,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json
index 49756682ba..0a7d2dd29b 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4P 0.6 HF nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json
index 8c1a60781b..6b9031f8fe 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4P 0.6 nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json
index 1140b773e3..37efacacde 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json	
@@ -23,7 +23,7 @@
 	"cooling_tube_length": "0",
 	"cooling_tube_retraction": "0",
 	"default_filament_profile": [
-		"Generic PLA @Flashforge G3U 0.6 Nozzle"
+		"Flashforge PLA Basic @FF G4P 0.8 HF nozzle"
 	],
 	"default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
 	"deretraction_speed": [
@@ -200,7 +200,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json
index 4bcdc78d4a..cac18081f6 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json	
@@ -8,5 +8,5 @@
 	"bed_model": "flashforge_g4pro_buildplate_model.stl",
 	"bed_texture": "flashforge_g4pro_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1"
+	"default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1;Flashforge PLA Basic @FF G4P 0.25 nozzle;Flashforge PLA Basic @FF G4P HF;Flashforge PLA Basic @FF G4P;Flashforge PLA Basic @FF G4P 0.6 HF nozzle;Flashforge PLA Basic @FF G4P 0.6 nozzle;Flashforge PLA Basic @FF G4P 0.8 HF nozzle"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4.json b/resources/profiles/Flashforge/machine/Flashforge Guider4.json
index 0cd89727d1..6633eb093f 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4.json	
@@ -8,5 +8,5 @@
 	"bed_model": "flashforge_g4pro_buildplate_model.stl",
 	"bed_texture": "flashforge_g4pro_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1"
+	"default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1;Flashforge PLA Basic @FF G4 0.25 nozzle;Flashforge PLA Basic @FF G4 HF;Flashforge PLA Basic @FF G4;Flashforge PLA Basic @FF G4 0.6 HF nozzle;Flashforge PLA Basic @FF G4 0.6 nozzle;Flashforge PLA Basic @FF G4 0.8 HF nozzle"
 }
diff --git a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
index 7e2e700885..1c71c396eb 100644
--- a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25",
diff --git a/resources/profiles/Flashforge/machine/fdm_klipper_common.json b/resources/profiles/Flashforge/machine/fdm_klipper_common.json
index 3126f70c76..d11eb22558 100644
--- a/resources/profiles/Flashforge/machine/fdm_klipper_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_klipper_common.json
@@ -116,8 +116,6 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"z_lift_type": "NormalLift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25",
diff --git a/resources/profiles/Flashforge/machine/fdm_machine_common.json b/resources/profiles/Flashforge/machine/fdm_machine_common.json
index d4bef57491..6361133d45 100644
--- a/resources/profiles/Flashforge/machine/fdm_machine_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "0.20mm Standard @Flashforge AD5M",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/Flashforge/process/0.08mm Standard @FF C5 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.08mm Standard @FF C5 0.25 nozzle.json
new file mode 100644
index 0000000000..09221f10b2
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.08mm Standard @FF C5 0.25 nozzle.json	
@@ -0,0 +1,28 @@
+{
+	"type": "process",
+	"name": "0.08mm Standard @FF C5 0.25 nozzle",
+	"inherits": "0.10mm Standard @FF AD5X 0.25 nozzle",
+	"from": "system",
+	"setting_id": "KrOSCGKyvNy9v08u",
+	"instantiation": "true",
+	"bottom_solid_infill_flow_ratio": "1",
+	"compatible_printers": [
+		"Flashforge Creator 5 0.25 nozzle",
+		"Flashforge Creator 5 Pro 0.25 nozzle"
+	],
+	"initial_layer_print_height": "0.1",
+	"internal_bridge_flow": "1",
+	"layer_height": "0.08",
+	"ooze_prevention": "1",
+	"preheat_time": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"print_settings_id": "0.08mm Standard @FF C5 0.25 nozzle",
+	"small_perimeter_speed": "30",
+	"standby_temperature_delta": "-100",
+	"top_solid_infill_flow_ratio": "1"
+}
diff --git a/resources/profiles/Flashforge/process/0.10mm Standard @FF C5 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.10mm Standard @FF C5 0.25 nozzle.json
new file mode 100644
index 0000000000..47ea8c6322
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.10mm Standard @FF C5 0.25 nozzle.json	
@@ -0,0 +1,27 @@
+{
+	"type": "process",
+	"name": "0.10mm Standard @FF C5 0.25 nozzle",
+	"inherits": "0.10mm Standard @FF AD5X 0.25 nozzle",
+	"from": "system",
+	"setting_id": "0Mep1gVTvD4RwK53",
+	"instantiation": "true",
+	"bottom_solid_infill_flow_ratio": "1",
+	"compatible_printers": [
+		"Flashforge Creator 5 0.25 nozzle",
+		"Flashforge Creator 5 Pro 0.25 nozzle"
+	],
+	"initial_layer_print_height": "0.1",
+	"internal_bridge_flow": "1",
+	"ooze_prevention": "1",
+	"preheat_time": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"print_settings_id": "0.10mm Standard @FF C5 0.25 nozzle",
+	"small_perimeter_speed": "30",
+	"standby_temperature_delta": "-100",
+	"top_solid_infill_flow_ratio": "1"
+}
diff --git a/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json
index 1b85975878..38862d967c 100644
--- a/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1VeWY2d3H1hYEkzL",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "80%",
 	"brim_width": "5",
@@ -33,7 +32,6 @@
 	"inner_wall_speed": "200",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "200",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "200",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Flashforge/process/0.12mm Standard @FF C5 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.12mm Standard @FF C5 0.25 nozzle.json
new file mode 100644
index 0000000000..df33cdf344
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.12mm Standard @FF C5 0.25 nozzle.json	
@@ -0,0 +1,28 @@
+{
+	"type": "process",
+	"name": "0.12mm Standard @FF C5 0.25 nozzle",
+	"inherits": "0.10mm Standard @FF AD5X 0.25 nozzle",
+	"from": "system",
+	"setting_id": "rcKQBKZJvCfrfzqV",
+	"instantiation": "true",
+	"bottom_solid_infill_flow_ratio": "1",
+	"compatible_printers": [
+		"Flashforge Creator 5 0.25 nozzle",
+		"Flashforge Creator 5 Pro 0.25 nozzle"
+	],
+	"initial_layer_print_height": "0.1",
+	"internal_bridge_flow": "1",
+	"layer_height": "0.12",
+	"ooze_prevention": "1",
+	"preheat_time": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"print_settings_id": "0.12mm Standard @FF C5 0.25 nozzle",
+	"small_perimeter_speed": "30",
+	"standby_temperature_delta": "-100",
+	"top_solid_infill_flow_ratio": "1"
+}
diff --git a/resources/profiles/Flashforge/process/0.14mm Standard @FF C5 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.14mm Standard @FF C5 0.25 nozzle.json
new file mode 100644
index 0000000000..fd6f8f560d
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.14mm Standard @FF C5 0.25 nozzle.json	
@@ -0,0 +1,28 @@
+{
+	"type": "process",
+	"name": "0.14mm Standard @FF C5 0.25 nozzle",
+	"inherits": "0.10mm Standard @FF AD5X 0.25 nozzle",
+	"from": "system",
+	"setting_id": "749mQY3CU2jk0MOd",
+	"instantiation": "true",
+	"bottom_solid_infill_flow_ratio": "1",
+	"compatible_printers": [
+		"Flashforge Creator 5 0.25 nozzle",
+		"Flashforge Creator 5 Pro 0.25 nozzle"
+	],
+	"initial_layer_print_height": "0.1",
+	"internal_bridge_flow": "1",
+	"layer_height": "0.14",
+	"ooze_prevention": "1",
+	"preheat_time": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"print_settings_id": "0.14mm Standard @FF C5 0.25 nozzle",
+	"small_perimeter_speed": "30",
+	"standby_temperature_delta": "-100",
+	"top_solid_infill_flow_ratio": "1"
+}
diff --git a/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json
index 577586baaf..1dde9465a0 100644
--- a/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "VPKIYFY99e6eS9Nd",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "25",
 	"internal_bridge_speed": "150%",
@@ -34,7 +33,6 @@
 	"inner_wall_speed": "60",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "200",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "200",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json b/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json
index ad89354ae1..176e4c0031 100644
--- a/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "60",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json
index 619014c8a4..54cb9bd666 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "48",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json
index 2e81b9758f..a2867c886b 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json
index 1b9fd03771..cb003b72c7 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "80%",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json
index aeb81d2dd9..fd4dda1aea 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json	
@@ -116,7 +116,6 @@
 	"overhang_4_4_speed": "10",
 	"overhang_reverse": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "5",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json
index 97d51bec7f..c3d5382f70 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "uknnclg0sGPLeGcN",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50%",
 	"internal_bridge_speed": "70%",
@@ -34,7 +33,6 @@
 	"inner_wall_speed": "200",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "200",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "200",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json
index a2b3f3db1d..12f44410c9 100644
--- a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json	
@@ -40,7 +40,6 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
 	"overhang_4_4_speed": "12",
-	"overhang_speed_classic": "1",
 	"prime_tower_width": "45",
 	"prime_volume": "45",
 	"print_settings_id": "0.25mm Standard @FF G4P 0.6 nozzle",
diff --git a/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json
index 3eda3c3d34..b7cbce9215 100644
--- a/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "twWwqkfSRYeAkuzT",
 	"instantiation": "true",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "1",
 	"bridge_speed": "50%",
 	"internal_bridge_speed": "70%",
@@ -34,7 +33,6 @@
 	"inner_wall_speed": "200",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "200",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "200",
 	"ironing_flow": "10%",
 	"ironing_spacing": "0.15",
diff --git a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json
index e17b0e8d9f..6520c4fb48 100644
--- a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "64",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json
index ea65c7de1b..52155fcc22 100644
--- a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json
index 238d3e3330..03dc328fd6 100644
--- a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json	
@@ -35,7 +35,6 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
 	"overhang_4_4_speed": "12",
-	"overhang_speed_classic": "1",
 	"prime_tower_width": "45",
 	"prime_volume": "45",
 	"print_settings_id": "0.30mm Standard @FF G4P 0.6 nozzle",
diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json
index 65f1ad351a..5485ef51e7 100644
--- a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json	
@@ -45,7 +45,6 @@
 	"min_bead_width": "100",
 	"elefant_foot_compensation": "0.15",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"accel_to_decel_enable": "0",
 	"filter_out_gap_fill": "0.5",
diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json
index 7c7e132ac3..8f7bd267cb 100644
--- a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json	
@@ -36,7 +36,6 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
 	"overhang_4_4_speed": "12",
-	"overhang_speed_classic": "1",
 	"prime_tower_width": "45",
 	"prime_volume": "45",
 	"print_settings_id": "0.36mm Standard @FF G4P 0.6 nozzle",
diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json
index 66a91699de..054f652ea8 100644
--- a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json	
@@ -36,7 +36,6 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "30",
 	"overhang_4_4_speed": "12",
-	"overhang_speed_classic": "1",
 	"prime_tower_width": "45",
 	"prime_volume": "45",
 	"print_settings_id": "0.42mm Standard @FF G4P 0.6 nozzle",
diff --git a/resources/profiles/Flashforge/process/fdm_process_common.json b/resources/profiles/Flashforge/process/fdm_process_common.json
index 362b69213e..fc96799afe 100644
--- a/resources/profiles/Flashforge/process/fdm_process_common.json
+++ b/resources/profiles/Flashforge/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json
index 8d5afce023..1288ef847e 100644
--- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json
+++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json
@@ -11,7 +11,6 @@
 	"gap_infill_speed": "200",
 	"sparse_infill_speed": "270",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"internal_solid_infill_acceleration": "7000",
 	"accel_to_decel_enable": "0",
diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json
index c55ea16d6b..9ef898d154 100644
--- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json
+++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json
@@ -19,7 +19,6 @@
 	"top_surface_speed": "120",
 	"gap_infill_speed": "150",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"internal_solid_infill_acceleration": "7000",
 	"accel_to_decel_enable": "0",
diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json
index 570bc9b175..12571d7331 100644
--- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json
+++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json
@@ -19,7 +19,6 @@
 	"top_surface_speed": "120",
 	"gap_infill_speed": "150",
 	"small_perimeter_speed": "50%",
-	"overhang_speed_classic": "0",
 	"internal_bridge_speed": "50",
 	"internal_solid_infill_acceleration": "7000",
 	"accel_to_decel_enable": "0",
diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json
index 09beed2646..9149caaef1 100644
--- a/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json
+++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "10000",
 	"inner_wall_acceleration": "5000",
diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json
index 5be5a8d4a3..8c09e115e2 100644
--- a/resources/profiles/FlyingBear.json
+++ b/resources/profiles/FlyingBear.json
@@ -1,6 +1,6 @@
 {
 	"name": "FlyingBear",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "1",
 	"description": "FlyingBear configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json
index 4da21780a1..fd14f77ebf 100644
--- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json	
@@ -180,7 +180,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json
index 795743dc1f..67d3d6181a 100644
--- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json	
+++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json	
@@ -8,5 +8,5 @@
 	"bed_model": "FlyingBear Ghost7-bed.stl",
 	"bed_texture": "FlyingBear Ghost7-texture.png",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear"
+	"default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear;FlyingBear PLA Basic @Ghost7"
 }
diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json
index 4e176dca31..442050312c 100644
--- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
@@ -177,7 +177,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json
index 53ca3accb9..0e0627029b 100644
--- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json	
@@ -8,5 +8,5 @@
 	"bed_model": "FlyingBear S1-bed.stl",
 	"bed_texture": "FlyingBear S1-texture.png",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear"
+	"default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear;FlyingBear PLA @S1"
 }
diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
index d9170b7fec..f70809115f 100644
--- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
@@ -176,7 +176,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/FlyingBear/machine/fdm_machine_common.json b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
index 9b3574e7de..c6309bb273 100644
--- a/resources/profiles/FlyingBear/machine/fdm_machine_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
@@ -172,7 +172,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/FlyingBear/machine/fdm_marlin_common.json b/resources/profiles/FlyingBear/machine/fdm_marlin_common.json
index 41ac0f91ca..d3c1abf330 100644
--- a/resources/profiles/FlyingBear/machine/fdm_marlin_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_marlin_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json
index b8200ed6aa..4f4f7c8ae5 100644
--- a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json
index 36f8e3705c..70b79e5397 100644
--- a/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json	
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json
index 9b34de8437..5c020a7a1e 100644
--- a/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json
+++ b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "150",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json
index 27c9643f05..965f71c7f4 100644
--- a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
index d922fcf3dc..3b7cdda9e9 100644
--- a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
+++ b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "200",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/FlyingBear/process/fdm_process_common.json b/resources/profiles/FlyingBear/process/fdm_process_common.json
index 7e7bc9ddb1..bfd2a604e6 100644
--- a/resources/profiles/FlyingBear/process/fdm_process_common.json
+++ b/resources/profiles/FlyingBear/process/fdm_process_common.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "200",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json b/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json
index 6dd6b765be..72d4365446 100644
--- a/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json
+++ b/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -83,7 +82,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "45",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Folgertech.json b/resources/profiles/Folgertech.json
index a20dc8992e..24f68067e7 100644
--- a/resources/profiles/Folgertech.json
+++ b/resources/profiles/Folgertech.json
@@ -1,6 +1,6 @@
 {
 	"name": "Folgertech",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Folgertech configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
index 035e434afe..c534b9cacb 100644
--- a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
+++ b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
@@ -115,7 +115,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/Folgertech/machine/fdm_machine_common.json b/resources/profiles/Folgertech/machine/fdm_machine_common.json
index 04ab524f9c..f7f0f31d7e 100644
--- a/resources/profiles/Folgertech/machine/fdm_machine_common.json
+++ b/resources/profiles/Folgertech/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
diff --git a/resources/profiles/Folgertech/process/fdm_process_common.json b/resources/profiles/Folgertech/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Folgertech/process/fdm_process_common.json
+++ b/resources/profiles/Folgertech/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json
index d04362b5af..caecb87a65 100644
--- a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json
+++ b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Geeetech.json b/resources/profiles/Geeetech.json
index cdd862e161..26651c6109 100644
--- a/resources/profiles/Geeetech.json
+++ b/resources/profiles/Geeetech.json
@@ -1,6 +1,6 @@
 {
 	"name": "Geeetech",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Geeetech configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
index 341fe0a126..8113b62d4c 100644
--- a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
+++ b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
@@ -117,7 +117,6 @@
 	"deretraction_speed": [
 		"20"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/Geeetech/machine/fdm_machine_common.json b/resources/profiles/Geeetech/machine/fdm_machine_common.json
index 97e8b60691..e08af83a05 100644
--- a/resources/profiles/Geeetech/machine/fdm_machine_common.json
+++ b/resources/profiles/Geeetech/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -111,7 +110,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
 	"before_layer_change_gcode": "G92 E0",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
diff --git a/resources/profiles/Geeetech/process/fdm_process_common.json b/resources/profiles/Geeetech/process/fdm_process_common.json
index ef52351d98..b7313353c8 100644
--- a/resources/profiles/Geeetech/process/fdm_process_common.json
+++ b/resources/profiles/Geeetech/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Ginger Additive.json b/resources/profiles/Ginger Additive.json
index 249c3e9906..d9a38ccfba 100644
--- a/resources/profiles/Ginger Additive.json	
+++ b/resources/profiles/Ginger Additive.json	
@@ -1,6 +1,6 @@
 {
 	"name": "Ginger Additive",
-	"version": "02.04.00.04",
+	"version": "02.04.00.05",
 	"force_update": "1",
 	"description": "Ginger configuration",
 	"machine_model_list": [
diff --git a/resources/profiles/Ginger Additive/filament/fdm_filament_common.json b/resources/profiles/Ginger Additive/filament/fdm_filament_common.json
index 71e447d01e..d6603a932e 100644
--- a/resources/profiles/Ginger Additive/filament/fdm_filament_common.json	
+++ b/resources/profiles/Ginger Additive/filament/fdm_filament_common.json	
@@ -93,9 +93,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -165,9 +162,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json
index 751c0e71f4..60cbb522c5 100644
--- a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json	
+++ b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json	
@@ -191,7 +191,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/Ginger Additive/process/fdm_process_common.json b/resources/profiles/Ginger Additive/process/fdm_process_common.json
index cd590b710e..3a582c6bc3 100644
--- a/resources/profiles/Ginger Additive/process/fdm_process_common.json	
+++ b/resources/profiles/Ginger Additive/process/fdm_process_common.json	
@@ -122,7 +122,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/InfiMech.json b/resources/profiles/InfiMech.json
index 06d0629ffc..78c54e0b4d 100644
--- a/resources/profiles/InfiMech.json
+++ b/resources/profiles/InfiMech.json
@@ -1,6 +1,6 @@
 {
 	"name": "InfiMech",
-	"version": "02.04.00.03",
+	"version": "02.04.00.06",
 	"force_update": "1",
 	"description": "InfiMech configurations",
 	"machine_model_list": [
@@ -476,11 +476,11 @@
 	"machine_list": [
 		{
 			"name": "fdm_machine_common",
-			"sub_path": "machine/HSN/fdm_machine_common.json"
+			"sub_path": "machine/fdm_machine_common.json"
 		},
 		{
 			"name": "fdm_klipper_common",
-			"sub_path": "machine/HSN/fdm_klipper_common.json"
+			"sub_path": "machine/fdm_klipper_common.json"
 		},
 		{
 			"name": "InfiMech EX 0.4 nozzle",
diff --git a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json
index 149177562f..a77186c2fd 100644
--- a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json	
+++ b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json	
@@ -180,7 +180,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json
index 2bf51ab627..a018e3f8a3 100644
--- a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json	
+++ b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json	
@@ -180,7 +180,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json b/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json
index 8b8fd4e586..87fd816638 100644
--- a/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json	
+++ b/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json	
@@ -8,5 +8,5 @@
 	"bed_model": "InfiMech TX-bed.stl",
 	"bed_texture": "InfiMech TX-texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @InfiMech;Generic PA-CF @InfiMech;Generic PC @InfiMech;Generic PETG @InfiMech;Generic PLA @InfiMech;Generic TPU @InfiMech"
+	"default_materials": "Generic ABS @InfiMech;Generic PA-CF @InfiMech;Generic PC @InfiMech;Generic PETG @InfiMech;Generic PLA @InfiMech;Generic TPU @InfiMech;InfiMech PLA @HSN"
 }
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
deleted file mode 100644
index a95fea09c0..0000000000
--- a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
+++ /dev/null
@@ -1,201 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_klipper_common",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"auxiliary_fan": "1",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
-	"change_filament_gcode": "",
-	"cooling_tube_length": "5",
-	"cooling_tube_retraction": "91.5",
-	"default_filament_profile": [
-		"Generic PLA @InfiMech"
-	],
-	"default_print_profile": "0.20mm Standard @InfiMech TX",
-	"deretraction_speed": [
-		"30"
-	],
-	"enable_filament_ramming": "1",
-	"extra_loading_move": "-2",
-	"extruder_clearance_height_to_lid": "69",
-	"extruder_clearance_height_to_rod": "69",
-	"extruder_clearance_radius": "49",
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"high_current_on_filament_swap": "0",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_end_gcode": "PRINT_END",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"3",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"30",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"12"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
-	"machine_unload_filament_time": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "151.32",
-	"parking_pos_retraction": "92",
-	"print_host_webui": "",
-	"printable_area": [
-		"0x0",
-		"220x0",
-		"220x220",
-		"0x220"
-	],
-	"printable_height": "250",
-	"printer_model": "Generic Klipper Printer",
-	"printer_notes": "",
-	"printer_settings_id": "InfiMech TX 0.4 nozzle",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"printhost_apikey": "",
-	"printhost_authorization_type": "key",
-	"printhost_cafile": "",
-	"printhost_password": "",
-	"printhost_port": "",
-	"printhost_ssl_ignore_revoke": "0",
-	"printhost_user": "",
-	"purge_in_prime_tower": "1",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"249"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.5"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"template_custom_gcode": "",
-	"thumbnails": [
-		"300x300"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	]
-}
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
deleted file mode 100644
index 35501555bb..0000000000
--- a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
+++ /dev/null
@@ -1,197 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"printer_technology": "FFF",
-	"gcode_flavor": "klipper",
-	"auxiliary_fan": "1",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
-	"change_filament_gcode": "",
-	"cooling_tube_length": "5",
-	"cooling_tube_retraction": "91.5",
-	"default_filament_profile": [
-		"Generic PLA @InfiMech"
-	],
-	"default_print_profile": "0.20mm Standard @InfiMech TX",
-	"deretraction_speed": [
-		"30"
-	],
-	"enable_filament_ramming": "1",
-	"extra_loading_move": "-2",
-	"extruder_clearance_height_to_lid": "69",
-	"extruder_clearance_height_to_rod": "69",
-	"extruder_clearance_radius": "49",
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"high_current_on_filament_swap": "0",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_end_gcode": "PRINT_END",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"9000",
-		"9000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"3",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"30",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"12"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
-	"machine_unload_filament_time": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "151.32",
-	"parking_pos_retraction": "92",
-	"print_host_webui": "",
-	"printable_area": [
-		"0x0",
-		"220x0",
-		"220x220",
-		"0x220"
-	],
-	"printable_height": "250",
-	"printer_model": "Generic Klipper Printer",
-	"printer_notes": "",
-	"printer_settings_id": "InfiMech TX 0.4 nozzle",
-	"printer_variant": "0.4",
-	"printhost_apikey": "",
-	"printhost_authorization_type": "key",
-	"printhost_cafile": "",
-	"printhost_password": "",
-	"printhost_port": "",
-	"printhost_ssl_ignore_revoke": "0",
-	"printhost_user": "",
-	"purge_in_prime_tower": "1",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"249"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.5"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"template_custom_gcode": "",
-	"thumbnails": [
-		"300x300"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	]
-}
diff --git a/resources/profiles/InfiMech/machine/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
index bbcd27a966..457c3b1d9d 100644
--- a/resources/profiles/InfiMech/machine/fdm_klipper_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
@@ -119,7 +119,7 @@
 		"0.4"
 	],
 	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
+	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "151.32",
 	"parking_pos_retraction": "92",
 	"print_host_webui": "",
@@ -177,7 +177,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/InfiMech/machine/fdm_machine_common.json b/resources/profiles/InfiMech/machine/fdm_machine_common.json
index c329e930cb..c6847d7db3 100644
--- a/resources/profiles/InfiMech/machine/fdm_machine_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_machine_common.json
@@ -116,7 +116,7 @@
 		"0.08"
 	],
 	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
+	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "151.32",
 	"parking_pos_retraction": "92",
 	"print_host_webui": "",
@@ -173,7 +173,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"template_custom_gcode": "",
 	"thumbnails": [
diff --git a/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json b/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json
index c3fb83348f..1886e33d56 100644
--- a/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json	
+++ b/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json b/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json
index 783db122a4..9ca14195f7 100644
--- a/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json	
+++ b/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json b/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json
index 6a755b74f1..1529d65ac8 100644
--- a/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json
+++ b/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "150",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json b/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json
index d95e84cedc..99dfa56787 100644
--- a/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json	
+++ b/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json b/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json
index e5846e2cc4..888a67861a 100644
--- a/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json
+++ b/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "150",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json b/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json
index 546464ce49..57f844d7f5 100644
--- a/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json	
+++ b/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json	
@@ -24,7 +24,6 @@
 	"layer_height": "0.16",
 	"line_width": "0.42",
 	"outer_wall_line_width": "0.42",
-	"overhang_speed_classic": "0",
 	"precise_outer_wall": "0",
 	"print_flow_ratio": "0.95",
 	"seam_gap": "10%",
diff --git a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
index dc9e9ace24..8b53078f6d 100644
--- a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
+++ b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "200",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/InfiMech/process/fdm_process_common.json b/resources/profiles/InfiMech/process/fdm_process_common.json
index 7e7bc9ddb1..bfd2a604e6 100644
--- a/resources/profiles/InfiMech/process/fdm_process_common.json
+++ b/resources/profiles/InfiMech/process/fdm_process_common.json
@@ -64,7 +64,6 @@
 	"inner_wall_line_width": "0.45",
 	"interface_shells": "0",
 	"internal_bridge_speed": "50%",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "200",
 	"overhang_4_4_speed": "10",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json
index 0d0f98e733..4c9a128ead 100644
--- a/resources/profiles/Kingroon.json
+++ b/resources/profiles/Kingroon.json
@@ -1,7 +1,7 @@
 {
 	"name": "Kingroon",
 	"url": "https://kingroon.com/",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "1",
 	"description": "Kingroon configuration files",
 	"machine_model_list": [
diff --git a/resources/profiles/Kingroon/machine/fdm_machine_common.json b/resources/profiles/Kingroon/machine/fdm_machine_common.json
index ab1a5d4253..6e7afe6f63 100644
--- a/resources/profiles/Kingroon/machine/fdm_machine_common.json
+++ b/resources/profiles/Kingroon/machine/fdm_machine_common.json
@@ -156,7 +156,6 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "M600",
 	"wipe": [
diff --git a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json
index f91fc639a0..a29141daf1 100644
--- a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json	
+++ b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json	
@@ -24,7 +24,6 @@
 	"overhang_reverse": "1",
 	"overhang_reverse_internal_only": "1",
 	"overhang_reverse_threshold": "0%",
-	"overhang_speed_classic": "1",
 	"seam_gap": "0.1",
 	"seam_position": "back",
 	"slow_down_layers": "2",
diff --git a/resources/profiles/Kingroon/process/fdm_process_common.json b/resources/profiles/Kingroon/process/fdm_process_common.json
index ed478c1aaa..48f60ee2ab 100644
--- a/resources/profiles/Kingroon/process/fdm_process_common.json
+++ b/resources/profiles/Kingroon/process/fdm_process_common.json
@@ -10,7 +10,6 @@
 	"bottom_solid_infill_flow_ratio": "1",
 	"bottom_surface_pattern": "monotonic",
 	"bridge_acceleration": "50%",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "0.9",
 	"brim_object_gap": "0.1",
 	"brim_type": "auto_brim",
@@ -44,7 +43,6 @@
 	"fuzzy_skin_point_distance": "0.8",
 	"fuzzy_skin_thickness": "0.3",
 	"gap_infill_speed": "100",
-	"tree_support_with_infill": "0",
 	"overhang_1_4_speed": "50",
 	"overhang_2_4_speed": "40",
 	"overhang_3_4_speed": "20",
@@ -70,7 +68,6 @@
 	"inner_wall_line_width": "0.45",
 	"inner_wall_speed": "100",
 	"interface_shells": "0",
-	"internal_bridge_support_thickness": "0",
 	"internal_solid_infill_acceleration": "100%",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "100",
@@ -90,7 +87,6 @@
 	"outer_wall_jerk": "9",
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "80",
-	"overhang_speed_classic": "0",
 	"post_process": [],
 	"precise_outer_wall": "0",
 	"prime_tower_brim_width": "3",
diff --git a/resources/profiles/LH.json b/resources/profiles/LH.json
index 99a7049fa5..7784b42bed 100644
--- a/resources/profiles/LH.json
+++ b/resources/profiles/LH.json
@@ -1,7 +1,7 @@
 {
 	"name": "LH",
 	"url": "https://github.com/lhndo/LH-Stinger",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "LH 3D Printer Configuration",
 	"machine_model_list": [
diff --git a/resources/profiles/LH/machine/fdm_lh_common.json b/resources/profiles/LH/machine/fdm_lh_common.json
index 277e0762eb..02a4412838 100644
--- a/resources/profiles/LH/machine/fdm_lh_common.json
+++ b/resources/profiles/LH/machine/fdm_lh_common.json
@@ -128,7 +128,6 @@
 	"z_hop_types": [
 		"Auto Lift"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"manual_filament_change": "1",
@@ -136,7 +135,7 @@
 		"1"
 	],
 	"default_filament_profile": [
-		"LH Generic PLA"
+		"LHS PLA"
 	],
 	"enable_filament_ramming": "0",
 	"default_print_profile": "0.20mm Daily @LH Stinger",
@@ -154,4 +153,4 @@
 	],
 	"bed_temperature_formula": "by_first_filament",
 	"auxiliary_fan": "1"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/LH/machine/fdm_machine_common.json b/resources/profiles/LH/machine/fdm_machine_common.json
index a46315dc8c..bf8f2249cf 100644
--- a/resources/profiles/LH/machine/fdm_machine_common.json
+++ b/resources/profiles/LH/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -116,4 +115,4 @@
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_pause_gcode": "M601"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/LH/process/fdm_process_common.json b/resources/profiles/LH/process/fdm_process_common.json
index df8283904a..f09e319bd6 100644
--- a/resources/profiles/LH/process/fdm_process_common.json
+++ b/resources/profiles/LH/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -83,7 +82,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
@@ -105,4 +103,4 @@
 	"top_surface_speed": "50",
 	"gap_infill_speed": "30",
 	"travel_speed": "200"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/LONGER.json b/resources/profiles/LONGER.json
index dbf3cc3277..b4d6c3a1fb 100644
--- a/resources/profiles/LONGER.json
+++ b/resources/profiles/LONGER.json
@@ -1,6 +1,6 @@
 {
 	"name": "LONGER",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "LONGER configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/LONGER/machine/LONGER LK10 Plus.json b/resources/profiles/LONGER/machine/LONGER LK10 Plus.json
index 609ed74444..69dd7c11c0 100644
--- a/resources/profiles/LONGER/machine/LONGER LK10 Plus.json	
+++ b/resources/profiles/LONGER/machine/LONGER LK10 Plus.json	
@@ -12,5 +12,5 @@
 		"0x0"
 	],
 	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PETG @System"
+	"default_materials": "Generic PLA @LONGER LK10 Plus;Generic PETG @LONGER LK10 Plus"
 }
diff --git a/resources/profiles/LONGER/machine/LONGER LK10.json b/resources/profiles/LONGER/machine/LONGER LK10.json
index 7bc3ab48d4..99d27e4506 100644
--- a/resources/profiles/LONGER/machine/LONGER LK10.json	
+++ b/resources/profiles/LONGER/machine/LONGER LK10.json	
@@ -12,5 +12,5 @@
 		"0x0"
 	],
 	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PETG @System"
+	"default_materials": "Generic PLA @LONGER LK10;Generic PETG @LONGER LK10"
 }
diff --git a/resources/profiles/LONGER/machine/fdm_machine_common.json b/resources/profiles/LONGER/machine/fdm_machine_common.json
index 61af4026c0..159c2c0f37 100644
--- a/resources/profiles/LONGER/machine/fdm_machine_common.json
+++ b/resources/profiles/LONGER/machine/fdm_machine_common.json
@@ -5,7 +5,6 @@
 	"instantiation": "false",
 	"printer_technology": "FFF",
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/LONGER/process/fdm_process_common.json b/resources/profiles/LONGER/process/fdm_process_common.json
index a1c777bc4b..fa3d9c97eb 100644
--- a/resources/profiles/LONGER/process/fdm_process_common.json
+++ b/resources/profiles/LONGER/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Lulzbot.json b/resources/profiles/Lulzbot.json
index 1d8e31dc93..1ca47d7cba 100644
--- a/resources/profiles/Lulzbot.json
+++ b/resources/profiles/Lulzbot.json
@@ -1,7 +1,7 @@
 {
 	"name": "Lulzbot",
 	"url": "https://ohai.lulzbot.com/group/taz-6/",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Lulzbot configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json
index ebb151d2b0..115d886301 100644
--- a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json	
+++ b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json	
@@ -15,5 +15,5 @@
 	"machine_load_filament_time": "20",
 	"machine_unload_filament_time": "20",
 	"machine_tool_change_time": "5",
-	"default_materials": "Generic PLA @System, Generic PETG @System, Generic ABS @System"
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
 }
diff --git a/resources/profiles/Lulzbot/machine/fdm_machine_common.json b/resources/profiles/Lulzbot/machine/fdm_machine_common.json
index b376e28164..2874e7b0fb 100644
--- a/resources/profiles/Lulzbot/machine/fdm_machine_common.json
+++ b/resources/profiles/Lulzbot/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin2",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json
index 8114e206de..e1bf7498eb 100644
--- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json	
+++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7AJRQW7g8u7CnKhZ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json
index 5cf84c2791..5b5d4fa70b 100644
--- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json	
+++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "K4uIiLjmRJfy0GZv",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json
index f6f88cee34..c1b93d4fed 100644
--- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json	
+++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jEDhBnfwOyj5oEO8",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json
index 05bf1ecca0..e70182aa1a 100644
--- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json	
+++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "uAws1KNEUyrcJTSy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Lulzbot/process/fdm_process_common.json b/resources/profiles/Lulzbot/process/fdm_process_common.json
index 7c4803ab96..1437b79995 100644
--- a/resources/profiles/Lulzbot/process/fdm_process_common.json
+++ b/resources/profiles/Lulzbot/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/M3D.json b/resources/profiles/M3D.json
index cb24edb886..17d760face 100644
--- a/resources/profiles/M3D.json
+++ b/resources/profiles/M3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "M3D",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Configuration for M3D printers",
 	"machine_model_list": [
diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json b/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json
index 941348c128..d661bed3d1 100644
--- a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json	
+++ b/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json	
@@ -7,6 +7,6 @@
 	"nozzle_diameter": "0.4",
 	"bed_model": "M3D Enabler D8500 MM Model_bed_model.stl",
 	"bed_texture": "M3D Enabler D8500 MM Model_bed_texture.svg",
-	"default_materials": "Generic PLA @system",
+	"default_materials": "Generic PLA @System",
 	"scan_folder": "1"
 }
diff --git a/resources/profiles/MagicMaker.json b/resources/profiles/MagicMaker.json
index cfb4c10ac2..08e5774547 100644
--- a/resources/profiles/MagicMaker.json
+++ b/resources/profiles/MagicMaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "MagicMaker",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "MagicMaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json
index 59f622953b..91054a666d 100644
--- a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json	
@@ -73,7 +73,7 @@
 		"30"
 	],
 	"default_filament_profile": [
-		"MM Generic PLA"
+		"Generic PLA @System"
 	],
 	"machine_max_acceleration_e": [
 		"10000"
diff --git a/resources/profiles/MagicMaker/machine/fdm_machine_common.json b/resources/profiles/MagicMaker/machine/fdm_machine_common.json
index 256eca42de..64d90f6246 100644
--- a/resources/profiles/MagicMaker/machine/fdm_machine_common.json
+++ b/resources/profiles/MagicMaker/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"10000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "0.10mm Fine @MM hj",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json
index d980bd9ffa..e15e8a8268 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "JoLMVPh4bNahqirV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json
index a27ed5c8ac..7c3ca0f4c7 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "m6Y453vyMDxFz4c7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json
index 263c3c7e02..46feed3806 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QI9sXxzUoh2A8c0S",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json
index f04d1862e1..be0c7fa9f2 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "vCIBhcj3X7d07y9G",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json
index 740aa73f40..8431418656 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "BLrg8vEj3xZyxNTo",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json
index fab1e63f1d..dea3d51d65 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "fIzlKlmcI4pDKviy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json
index f7cbb71eda..331e13b30e 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "xngBXACjTNqOZNyB",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json
index e24e6c7fd3..4039971a72 100644
--- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "wHOzdPcMWYZNhny2",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json
index ad71011496..f9c45c30f9 100644
--- a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "PVbARB8V8JUBbIZG",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json
index ffabaed092..cae9a2f15a 100644
--- a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "gR34Ioeioizl1UXy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json
index 2c252a73e3..a308842d2c 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ON1x9dQTQTgGNLCw",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json
index be5f745572..487aba341c 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "JoTnXrNSnHKraaeB",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json
index 5e8078a0ca..02cbfacae2 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "J9s3XNTCUjsYusKD",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json
index 1fa581bbde..f749464d1c 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "MPfzxLi2GBioXdOp",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json
index 59d7797359..d52e01a20e 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Ivz7U0RTrX558HQ4",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json
index b3e9571756..6073685cc6 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "OZKDJHIsKAZtJTeq",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json
index 20ab75cbc9..8e80392ab7 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "RL1Irvbsm9Fh3jNz",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json
index b56e29914f..85edf0082d 100644
--- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "TkBYOyBebm3pMHrl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json
index 318575eb72..3a65f152ad 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QuoLlC961atuxMnn",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json
index 19ac9c25a5..f9775b7624 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "aXpG4y73oeV4p4by",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json
index e5cc84d0fb..4931eba26c 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lZ3guqhwMGxBFtIh",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json
index 1a3d053cd2..611002258a 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "yBdZW946qhSKDU4w",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json
index fdf6c572e6..b02add4e63 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Clfnw7cqNtWmzjB1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json
index ef49cf7d48..82fbed8b1f 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "g2unBNIOfILyLrLQ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json
index 4488948238..f9e8ebcf1d 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "bVabJjzFcaYFQ77o",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json
index adb7fe1465..b27c6f994a 100644
--- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json	
+++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "G2b2NRdM3geucH0v",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/MagicMaker/process/fdm_process_common.json b/resources/profiles/MagicMaker/process/fdm_process_common.json
index 99fcd508d0..45c9bcf236 100644
--- a/resources/profiles/MagicMaker/process/fdm_process_common.json
+++ b/resources/profiles/MagicMaker/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Mellow.json b/resources/profiles/Mellow.json
index f0b81c832c..6f34f757a7 100644
--- a/resources/profiles/Mellow.json
+++ b/resources/profiles/Mellow.json
@@ -1,6 +1,6 @@
 {
 	"name": "Mellow",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Mellow Printer Profiles",
 	"machine_model_list": [
diff --git a/resources/profiles/Mellow/machine/fdm_common_M1.json b/resources/profiles/Mellow/machine/fdm_common_M1.json
index 0d7a37436a..1556cf630a 100644
--- a/resources/profiles/Mellow/machine/fdm_common_M1.json
+++ b/resources/profiles/Mellow/machine/fdm_common_M1.json
@@ -117,7 +117,6 @@
 		"40"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Mellow/machine/fdm_machine_common.json b/resources/profiles/Mellow/machine/fdm_machine_common.json
index 11833be972..a07212bae7 100644
--- a/resources/profiles/Mellow/machine/fdm_machine_common.json
+++ b/resources/profiles/Mellow/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Mellow/process/fdm_process_common.json b/resources/profiles/Mellow/process/fdm_process_common.json
index feb86df0e1..f37dc52e73 100644
--- a/resources/profiles/Mellow/process/fdm_process_common.json
+++ b/resources/profiles/Mellow/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -84,7 +83,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/OpenEYE.json b/resources/profiles/OpenEYE.json
index e29674323e..36f4ae9fac 100644
--- a/resources/profiles/OpenEYE.json
+++ b/resources/profiles/OpenEYE.json
@@ -1,7 +1,7 @@
 {
 	"name": "OpenEYE",
 	"url": "http://www.openeye.tech",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "OpenEYE Printers Configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/OpenEYE/machine/fdm_machine_common.json b/resources/profiles/OpenEYE/machine/fdm_machine_common.json
index 86cbf26376..d8845ab892 100644
--- a/resources/profiles/OpenEYE/machine/fdm_machine_common.json
+++ b/resources/profiles/OpenEYE/machine/fdm_machine_common.json
@@ -1,4 +1,8 @@
 {
+	"type": "machine",
+	"name": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"best_object_pos": "0.5x0.5",
 	"change_filament_gcode": "",
@@ -16,9 +20,7 @@
 	"extruder_offset": [
 		"0x0"
 	],
-	"from": "system",
 	"gcode_flavor": "marlin",
-	"instantiation": "false",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
 	"machine_max_acceleration_e": [
@@ -77,7 +79,6 @@
 	"min_layer_height": [
 		"0.08"
 	],
-	"name": "fdm_machine_common",
 	"nozzle_diameter": [
 		"0.4"
 	],
@@ -109,9 +110,7 @@
 	"retraction_speed": [
 		"60"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
-	"type": "machine",
 	"wipe": [
 		"1"
 	],
diff --git a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
index 8af6ea96eb..6bfd69da55 100644
--- a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
+++ b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
@@ -1,4 +1,9 @@
 {
+	"type": "machine",
+	"name": "fdm_openeye_common",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
 	"adaptive_bed_mesh_margin": "0",
 	"auxiliary_fan": "0",
 	"bed_exclude_area": [
@@ -38,14 +43,11 @@
 	"fan_kickstart": "0",
 	"fan_speedup_overhangs": "1",
 	"fan_speedup_time": "0",
-	"from": "system",
 	"gcode_flavor": "klipper",
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
 	"printer_agent": "moonraker",
-	"inherits": "fdm_machine_common",
-	"instantiation": "false",
 	"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n_MMU_UPDATE_HEIGHT",
 	"long_retractions_when_cut": [
 		"0"
@@ -137,7 +139,6 @@
 		"0.08"
 	],
 	"min_resonance_avoidance_speed": "70",
-	"name": "fdm_openeye_common",
 	"nozzle_diameter": [
 		"0.4",
 		"0.4"
@@ -195,7 +196,6 @@
 		"40"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "0",
 	"support_chamber_temp_control": "0",
@@ -208,7 +208,6 @@
 	"travel_slope": [
 		"3"
 	],
-	"type": "machine",
 	"use_firmware_retraction": "0",
 	"use_relative_e_distances": "1",
 	"wipe": [
diff --git a/resources/profiles/OpenEYE/process/fdm_process_common.json b/resources/profiles/OpenEYE/process/fdm_process_common.json
index a1e9d13605..9ac1223f30 100644
--- a/resources/profiles/OpenEYE/process/fdm_process_common.json
+++ b/resources/profiles/OpenEYE/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"bottom_shell_layers": "3",
 	"bottom_shell_thickness": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -33,7 +32,6 @@
 	"inner_wall_line_width": "0.45",
 	"inner_wall_speed": "40",
 	"interface_shells": "0",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": "40",
 	"ironing_flow": "10%",
diff --git a/resources/profiles/OrcaArena.json b/resources/profiles/OrcaArena.json
index 866b720b78..dd5f307a95 100644
--- a/resources/profiles/OrcaArena.json
+++ b/resources/profiles/OrcaArena.json
@@ -1,7 +1,7 @@
 {
 	"name": "Orca Arena Printer",
 	"url": "",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Orca Arena configuration files",
 	"machine_model_list": [
diff --git a/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json b/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json
index e375904da2..aa166a4c90 100644
--- a/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json	
+++ b/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json	
@@ -9,5 +9,5 @@
 	"bed_model": "",
 	"bed_texture": "",
 	"hotend_model": "",
-	"default_materials": "Generic PLA Silk @OrcaArena;Generic PLA @OrcaArena;Arena PLA Matte @Arena X1C;Arena PLA Basic @Arena X1C;Arena ABS @Arena X1C;Arena PC @Arena X1C;Arena Support W @Arena X1C;Arena TPU 95A @Arena X1C;PolyTerra PLA @Arena X1C;PolyLite PLA @Arena X1C;"
+	"default_materials": "Generic PLA Silk @OrcaArena;Generic PLA @OrcaArena;Arena PLA Matte @Arena X1C;Arena PLA Basic @Arena X1C;Arena ABS @Arena X1C;Arena PC @Arena X1C;Arena Support W @Arena X1C;Arena TPU 95A @Arena X1C;PolyTerra PLA @Arena X1C;PolyLite PLA @Arena X1C;Generic PLA @OrcaArena 0.2 nozzle"
 }
diff --git a/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json b/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json
index 84096e978c..0ce40a051a 100644
--- a/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json
+++ b/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json
@@ -144,7 +144,6 @@
 		"Spiral Lift"
 	],
 	"nozzle_type": "hardened_steel",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
 	"machine_end_gcode": "PRINT_END",
diff --git a/resources/profiles/OrcaArena/machine/fdm_machine_common.json b/resources/profiles/OrcaArena/machine/fdm_machine_common.json
index 01ece7b8a0..84a8829a59 100644
--- a/resources/profiles/OrcaArena/machine/fdm_machine_common.json
+++ b/resources/profiles/OrcaArena/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/OrcaArena/process/fdm_process_arena_common.json b/resources/profiles/OrcaArena/process/fdm_process_arena_common.json
index 2fda69d729..f0171b1731 100644
--- a/resources/profiles/OrcaArena/process/fdm_process_arena_common.json
+++ b/resources/profiles/OrcaArena/process/fdm_process_arena_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -31,7 +30,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/OrcaArena/process/fdm_process_common.json b/resources/profiles/OrcaArena/process/fdm_process_common.json
index abe5fe9e01..f78b43e241 100644
--- a/resources/profiles/OrcaArena/process/fdm_process_common.json
+++ b/resources/profiles/OrcaArena/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json
index c7b203d5f1..6d9885f942 100644
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [
@@ -68,258 +68,6 @@
 			"name": "fdm_filament_pla",
 			"sub_path": "filament/base/fdm_filament_pla.json"
 		},
-		{
-			"name": "FilAr PLA @base",
-			"sub_path": "filament/FilAr/FilAr PLA @base.json"
-		},
-		{
-			"name": "FilAr PLA Bronce",
-			"sub_path": "filament/FilAr/FilAr PLA Bronce.json"
-		},
-		{
-			"name": "FilAr PLA Gris Plata",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Plata.json"
-		},
-		{
-			"name": "FilAr PLA Cobre",
-			"sub_path": "filament/FilAr/FilAr PLA Cobre.json"
-		},
-		{
-			"name": "FilAr PLA Titanio",
-			"sub_path": "filament/FilAr/FilAr PLA Titanio.json"
-		},
-		{
-			"name": "FilAr PLA Tabaco",
-			"sub_path": "filament/FilAr/FilAr PLA Tabaco.json"
-		},
-		{
-			"name": "FilAr PLA Cafe con Leche",
-			"sub_path": "filament/FilAr/FilAr PLA Cafe con Leche.json"
-		},
-		{
-			"name": "FilAr PLA Manteca",
-			"sub_path": "filament/FilAr/FilAr PLA Manteca.json"
-		},
-		{
-			"name": "FilAr PLA Marron Oxido",
-			"sub_path": "filament/FilAr/FilAr PLA Marron Oxido.json"
-		},
-		{
-			"name": "FilAr PLA Carpincho",
-			"sub_path": "filament/FilAr/FilAr PLA Carpincho.json"
-		},
-		{
-			"name": "FilAr PLA Rosa Amaranto",
-			"sub_path": "filament/FilAr/FilAr PLA Rosa Amaranto.json"
-		},
-		{
-			"name": "FilAr PLA Rosa Flamenco",
-			"sub_path": "filament/FilAr/FilAr PLA Rosa Flamenco.json"
-		},
-		{
-			"name": "FilAr PLA Piel",
-			"sub_path": "filament/FilAr/FilAr PLA Piel.json"
-		},
-		{
-			"name": "FilAr PLA Verde FilAr",
-			"sub_path": "filament/FilAr/FilAr PLA Verde FilAr.json"
-		},
-		{
-			"name": "FilAr PLA Verde Manzana",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Manzana.json"
-		},
-		{
-			"name": "FilAr PLA Verde Pixel",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Pixel.json"
-		},
-		{
-			"name": "FilAr PLA Verde Oliva",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Oliva.json"
-		},
-		{
-			"name": "FilAr PLA Blanco Antartida",
-			"sub_path": "filament/FilAr/FilAr PLA Blanco Antartida.json"
-		},
-		{
-			"name": "FilAr PLA Blanco Calido",
-			"sub_path": "filament/FilAr/FilAr PLA Blanco Calido.json"
-		},
-		{
-			"name": "FilAr PLA Negro Azabache",
-			"sub_path": "filament/FilAr/FilAr PLA Negro Azabache.json"
-		},
-		{
-			"name": "FilAr PLA Naranja Tigre",
-			"sub_path": "filament/FilAr/FilAr PLA Naranja Tigre.json"
-		},
-		{
-			"name": "FilAr PLA Rojo de Carreras",
-			"sub_path": "filament/FilAr/FilAr PLA Rojo de Carreras.json"
-		},
-		{
-			"name": "FilAr PLA Amarillo Lirio",
-			"sub_path": "filament/FilAr/FilAr PLA Amarillo Lirio.json"
-		},
-		{
-			"name": "FilAr PLA Violeta Jacaranda",
-			"sub_path": "filament/FilAr/FilAr PLA Violeta Jacaranda.json"
-		},
-		{
-			"name": "FilAr PLA Gris Pizarra",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Pizarra.json"
-		},
-		{
-			"name": "FilAr PLA Gris Ceniza",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Ceniza.json"
-		},
-		{
-			"name": "FilAr PLA Azul Francia",
-			"sub_path": "filament/FilAr/FilAr PLA Azul Francia.json"
-		},
-		{
-			"name": "FilAr PLA Celeste Cielo",
-			"sub_path": "filament/FilAr/FilAr PLA Celeste Cielo.json"
-		},
-		{
-			"name": "FilAr PLA Oro",
-			"sub_path": "filament/FilAr/FilAr PLA Oro.json"
-		},
-		{
-			"name": "FilAr PLA Dorado",
-			"sub_path": "filament/FilAr/FilAr PLA Dorado.json"
-		},
-		{
-			"name": "FilAr PLA-mate @base",
-			"sub_path": "filament/FilAr/FilAr PLA-mate @base.json"
-		},
-		{
-			"name": "FilAr PLA-mate Amarillo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Amarillo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Azul",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Azul.json"
-		},
-		{
-			"name": "FilAr PLA-mate Beige",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Beige.json"
-		},
-		{
-			"name": "FilAr PLA-mate Blanco",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Blanco.json"
-		},
-		{
-			"name": "FilAr PLA-mate Bordo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Bordo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Celeste Cielo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Celeste Cielo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Chocolate",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Chocolate.json"
-		},
-		{
-			"name": "FilAr PLA-mate Gris",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Gris.json"
-		},
-		{
-			"name": "FilAr PLA-mate Marron",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Marron.json"
-		},
-		{
-			"name": "FilAr PLA-mate Naranja",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Naranja.json"
-		},
-		{
-			"name": "FilAr PLA-mate Negro",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Negro.json"
-		},
-		{
-			"name": "FilAr PLA-mate Piel",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Piel.json"
-		},
-		{
-			"name": "FilAr PLA-mate Rojo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Rojo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Rosa",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Rosa.json"
-		},
-		{
-			"name": "FilAr PLA-mate Uva",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Uva.json"
-		},
-		{
-			"name": "FilAr PLA-mate Verde",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Verde.json"
-		},
-		{
-			"name": "FilAr PLA-mate Violeta",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Violeta.json"
-		},
-		{
-			"name": "FilAr PETG @base",
-			"sub_path": "filament/FilAr/FilAr PETG @base.json"
-		},
-		{
-			"name": "FilAr PETG Amarillo Lima",
-			"sub_path": "filament/FilAr/FilAr PETG Amarillo Lima.json"
-		},
-		{
-			"name": "FilAr PETG Amarillo Radiante",
-			"sub_path": "filament/FilAr/FilAr PETG Amarillo Radiante.json"
-		},
-		{
-			"name": "FilAr PETG Azul Boreal",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Boreal.json"
-		},
-		{
-			"name": "FilAr PETG Azul Francia",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Francia.json"
-		},
-		{
-			"name": "FilAr PETG Azul Imperial",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Imperial.json"
-		},
-		{
-			"name": "FilAr PETG Blanco Antartida",
-			"sub_path": "filament/FilAr/FilAr PETG Blanco Antartida.json"
-		},
-		{
-			"name": "FilAr PETG Cian",
-			"sub_path": "filament/FilAr/FilAr PETG Cian.json"
-		},
-		{
-			"name": "FilAr PETG Coral",
-			"sub_path": "filament/FilAr/FilAr PETG Coral.json"
-		},
-		{
-			"name": "FilAr PETG Cristal",
-			"sub_path": "filament/FilAr/FilAr PETG Cristal.json"
-		},
-		{
-			"name": "FilAr PETG Gris Ceniza",
-			"sub_path": "filament/FilAr/FilAr PETG Gris Ceniza.json"
-		},
-		{
-			"name": "FilAr PETG Gris Plata",
-			"sub_path": "filament/FilAr/FilAr PETG Gris Plata.json"
-		},
-		{
-			"name": "FilAr PETG Magenta",
-			"sub_path": "filament/FilAr/FilAr PETG Magenta.json"
-		},
-		{
-			"name": "FilAr PETG Negro Azabache",
-			"sub_path": "filament/FilAr/FilAr PETG Negro Azabache.json"
-		},
-		{
-			"name": "FilAr PETG Rojo Carmesi",
-			"sub_path": "filament/FilAr/FilAr PETG Rojo Carmesi.json"
-		},
 		{
 			"name": "fdm_filament_pp",
 			"sub_path": "filament/base/fdm_filament_pp.json"
@@ -588,10 +336,6 @@
 			"name": "Generic PE-CF @base",
 			"sub_path": "filament/Generic PE-CF @base.json"
 		},
-		{
-			"name": "Generic PE-CF @System",
-			"sub_path": "filament/Generic PE-CF @System.json"
-		},
 		{
 			"name": "AliZ PETG @base",
 			"sub_path": "filament/AliZ/AliZ PETG @base.json"
@@ -672,6 +416,10 @@
 			"name": "Fiberon PETG-rCF @base",
 			"sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json"
 		},
+		{
+			"name": "FilAr PETG @base",
+			"sub_path": "filament/FilAr/FilAr PETG @base.json"
+		},
 		{
 			"name": "Generic PETG @System",
 			"sub_path": "filament/Generic PETG @System.json"
@@ -680,18 +428,10 @@
 			"name": "Generic PETG HF @base",
 			"sub_path": "filament/Generic PETG HF @base.json"
 		},
-		{
-			"name": "Generic PETG HF @System",
-			"sub_path": "filament/Generic PETG HF @System.json"
-		},
 		{
 			"name": "Generic PETG-CF @base",
 			"sub_path": "filament/Generic PETG-CF @base.json"
 		},
-		{
-			"name": "Generic PETG-CF @System",
-			"sub_path": "filament/Generic PETG-CF @System.json"
-		},
 		{
 			"name": "GreenGate3D PETG @base",
 			"sub_path": "filament/GreenGate3D/GreenGate3D PETG @base.json"
@@ -868,6 +608,14 @@
 			"name": "FILL3D PLA Turbo @base",
 			"sub_path": "filament/FILL3D/FILL3D PLA Turbo @base.json"
 		},
+		{
+			"name": "FilAr PLA @base",
+			"sub_path": "filament/FilAr/FilAr PLA @base.json"
+		},
+		{
+			"name": "FilAr PLA-mate @base",
+			"sub_path": "filament/FilAr/FilAr PLA-mate @base.json"
+		},
 		{
 			"name": "Generic PLA @System",
 			"sub_path": "filament/Generic PLA @System.json"
@@ -880,10 +628,6 @@
 			"name": "Generic PLA Matte @base",
 			"sub_path": "filament/Generic PLA Matte @base.json"
 		},
-		{
-			"name": "Generic PLA Matte @System",
-			"sub_path": "filament/Generic PLA Matte @System.json"
-		},
 		{
 			"name": "Generic PLA-CF @System",
 			"sub_path": "filament/Generic PLA-CF @System.json"
@@ -1092,18 +836,10 @@
 			"name": "Generic PP-CF @base",
 			"sub_path": "filament/Generic PP-CF @base.json"
 		},
-		{
-			"name": "Generic PP-CF @System",
-			"sub_path": "filament/Generic PP-CF @System.json"
-		},
 		{
 			"name": "Generic PP-GF @base",
 			"sub_path": "filament/Generic PP-GF @base.json"
 		},
-		{
-			"name": "Generic PP-GF @System",
-			"sub_path": "filament/Generic PP-GF @System.json"
-		},
 		{
 			"name": "Bambu PPA-CF @base",
 			"sub_path": "filament/Bambu/Bambu PPA-CF @base.json"
@@ -1292,10 +1028,6 @@
 			"name": "Elegoo ASA-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo ASA-CF @base.json"
 		},
-		{
-			"name": "Elegoo ASA-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo ASA-CF @System.json"
-		},
 		{
 			"name": "Overture ASA @System",
 			"sub_path": "filament/Overture/Overture ASA @System.json"
@@ -1388,14 +1120,14 @@
 			"name": "Elegoo PC-FR @base",
 			"sub_path": "filament/Elegoo/Elegoo PC-FR @base.json"
 		},
-		{
-			"name": "Elegoo PC-FR @System",
-			"sub_path": "filament/Elegoo/Elegoo PC-FR @System.json"
-		},
 		{
 			"name": "COEX PCTG PRIME @System",
 			"sub_path": "filament/COEX/COEX PCTG PRIME @System.json"
 		},
+		{
+			"name": "Generic PE-CF @System",
+			"sub_path": "filament/Generic PE-CF @System.json"
+		},
 		{
 			"name": "AliZ PETG @System",
 			"sub_path": "filament/AliZ/AliZ PETG @System.json"
@@ -1448,10 +1180,6 @@
 			"name": "Elegoo PET-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PET-CF @base.json"
 		},
-		{
-			"name": "Elegoo PET-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PET-CF @System.json"
-		},
 		{
 			"name": "Elegoo PETG @System",
 			"sub_path": "filament/Elegoo/Elegoo PETG @System.json"
@@ -1460,50 +1188,26 @@
 			"name": "Elegoo PETG HF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG HF @base.json"
 		},
-		{
-			"name": "Elegoo PETG HF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG HF @System.json"
-		},
 		{
 			"name": "Elegoo PETG PRO @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG PRO @base.json"
 		},
-		{
-			"name": "Elegoo PETG PRO @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG PRO @System.json"
-		},
 		{
 			"name": "Elegoo PETG Translucent @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @base.json"
 		},
-		{
-			"name": "Elegoo PETG Translucent @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @System.json"
-		},
 		{
 			"name": "Elegoo PETG-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG-CF @base.json"
 		},
-		{
-			"name": "Elegoo PETG-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG-CF @System.json"
-		},
 		{
 			"name": "Elegoo PETG-GF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG-GF @base.json"
 		},
-		{
-			"name": "Elegoo PETG-GF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG-GF @System.json"
-		},
 		{
 			"name": "Elegoo Rapid PETG @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @base.json"
 		},
-		{
-			"name": "Elegoo Rapid PETG @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @System.json"
-		},
 		{
 			"name": "FDplast PETG @System",
 			"sub_path": "filament/FDplast/FDplast PETG @System.json"
@@ -1528,6 +1232,70 @@
 			"name": "Fiberon PETG-rCF @System",
 			"sub_path": "filament/Polymaker/Fiberon PETG-rCF @System.json"
 		},
+		{
+			"name": "FilAr PETG Amarillo Lima",
+			"sub_path": "filament/FilAr/FilAr PETG Amarillo Lima.json"
+		},
+		{
+			"name": "FilAr PETG Amarillo Radiante",
+			"sub_path": "filament/FilAr/FilAr PETG Amarillo Radiante.json"
+		},
+		{
+			"name": "FilAr PETG Azul Boreal",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Boreal.json"
+		},
+		{
+			"name": "FilAr PETG Azul Francia",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Francia.json"
+		},
+		{
+			"name": "FilAr PETG Azul Imperial",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Imperial.json"
+		},
+		{
+			"name": "FilAr PETG Blanco Antartida",
+			"sub_path": "filament/FilAr/FilAr PETG Blanco Antartida.json"
+		},
+		{
+			"name": "FilAr PETG Cian",
+			"sub_path": "filament/FilAr/FilAr PETG Cian.json"
+		},
+		{
+			"name": "FilAr PETG Coral",
+			"sub_path": "filament/FilAr/FilAr PETG Coral.json"
+		},
+		{
+			"name": "FilAr PETG Cristal",
+			"sub_path": "filament/FilAr/FilAr PETG Cristal.json"
+		},
+		{
+			"name": "FilAr PETG Gris Ceniza",
+			"sub_path": "filament/FilAr/FilAr PETG Gris Ceniza.json"
+		},
+		{
+			"name": "FilAr PETG Gris Plata",
+			"sub_path": "filament/FilAr/FilAr PETG Gris Plata.json"
+		},
+		{
+			"name": "FilAr PETG Magenta",
+			"sub_path": "filament/FilAr/FilAr PETG Magenta.json"
+		},
+		{
+			"name": "FilAr PETG Negro Azabache",
+			"sub_path": "filament/FilAr/FilAr PETG Negro Azabache.json"
+		},
+		{
+			"name": "FilAr PETG Rojo Carmesi",
+			"sub_path": "filament/FilAr/FilAr PETG Rojo Carmesi.json"
+		},
+		{
+			"name": "Generic PETG HF @System",
+			"sub_path": "filament/Generic PETG HF @System.json"
+		},
+		{
+			"name": "Generic PETG-CF @System",
+			"sub_path": "filament/Generic PETG-CF @System.json"
+		},
 		{
 			"name": "GreenGate3D PETG @System",
 			"sub_path": "filament/GreenGate3D/GreenGate3D PETG @System.json"
@@ -1656,106 +1424,54 @@
 			"name": "Elegoo PLA Basic @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Basic @base.json"
 		},
-		{
-			"name": "Elegoo PLA Basic @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Basic @System.json"
-		},
 		{
 			"name": "Elegoo PLA Galaxy @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @base.json"
 		},
-		{
-			"name": "Elegoo PLA Galaxy @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @System.json"
-		},
 		{
 			"name": "Elegoo PLA Glow @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Glow @base.json"
 		},
-		{
-			"name": "Elegoo PLA Glow @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Glow @System.json"
-		},
 		{
 			"name": "Elegoo PLA Marble @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Marble @base.json"
 		},
-		{
-			"name": "Elegoo PLA Marble @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Marble @System.json"
-		},
 		{
 			"name": "Elegoo PLA Matte @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Matte @base.json"
 		},
-		{
-			"name": "Elegoo PLA Matte @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Matte @System.json"
-		},
 		{
 			"name": "Elegoo PLA PRO @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA PRO @base.json"
 		},
-		{
-			"name": "Elegoo PLA PRO @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA PRO @System.json"
-		},
 		{
 			"name": "Elegoo PLA Silk @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Silk @base.json"
 		},
-		{
-			"name": "Elegoo PLA Silk @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Silk @System.json"
-		},
 		{
 			"name": "Elegoo PLA Sparkle @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @base.json"
 		},
-		{
-			"name": "Elegoo PLA Sparkle @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @System.json"
-		},
 		{
 			"name": "Elegoo PLA Translucent2 @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @base.json"
 		},
-		{
-			"name": "Elegoo PLA Translucent2 @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @System.json"
-		},
 		{
 			"name": "Elegoo PLA Wood @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Wood @base.json"
 		},
-		{
-			"name": "Elegoo PLA Wood @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Wood @System.json"
-		},
 		{
 			"name": "Elegoo PLA+ @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA+ @base.json"
 		},
-		{
-			"name": "Elegoo PLA+ @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA+ @System.json"
-		},
 		{
 			"name": "Elegoo PLA-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA-CF @base.json"
 		},
-		{
-			"name": "Elegoo PLA-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA-CF @System.json"
-		},
 		{
 			"name": "Elegoo Rapid PLA+ @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @base.json"
 		},
-		{
-			"name": "Elegoo Rapid PLA+ @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @System.json"
-		},
 		{
 			"name": "FDplast PLA @System",
 			"sub_path": "filament/FDplast/FDplast PLA @System.json"
@@ -1768,6 +1484,194 @@
 			"name": "FILL3D PLA Turbo @System",
 			"sub_path": "filament/FILL3D/FILL3D PLA Turbo @System.json"
 		},
+		{
+			"name": "FilAr PLA Amarillo Lirio",
+			"sub_path": "filament/FilAr/FilAr PLA Amarillo Lirio.json"
+		},
+		{
+			"name": "FilAr PLA Azul Francia",
+			"sub_path": "filament/FilAr/FilAr PLA Azul Francia.json"
+		},
+		{
+			"name": "FilAr PLA Blanco Antartida",
+			"sub_path": "filament/FilAr/FilAr PLA Blanco Antartida.json"
+		},
+		{
+			"name": "FilAr PLA Blanco Calido",
+			"sub_path": "filament/FilAr/FilAr PLA Blanco Calido.json"
+		},
+		{
+			"name": "FilAr PLA Bronce",
+			"sub_path": "filament/FilAr/FilAr PLA Bronce.json"
+		},
+		{
+			"name": "FilAr PLA Cafe con Leche",
+			"sub_path": "filament/FilAr/FilAr PLA Cafe con Leche.json"
+		},
+		{
+			"name": "FilAr PLA Carpincho",
+			"sub_path": "filament/FilAr/FilAr PLA Carpincho.json"
+		},
+		{
+			"name": "FilAr PLA Celeste Cielo",
+			"sub_path": "filament/FilAr/FilAr PLA Celeste Cielo.json"
+		},
+		{
+			"name": "FilAr PLA Cobre",
+			"sub_path": "filament/FilAr/FilAr PLA Cobre.json"
+		},
+		{
+			"name": "FilAr PLA Dorado",
+			"sub_path": "filament/FilAr/FilAr PLA Dorado.json"
+		},
+		{
+			"name": "FilAr PLA Gris Ceniza",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Ceniza.json"
+		},
+		{
+			"name": "FilAr PLA Gris Pizarra",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Pizarra.json"
+		},
+		{
+			"name": "FilAr PLA Gris Plata",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Plata.json"
+		},
+		{
+			"name": "FilAr PLA Manteca",
+			"sub_path": "filament/FilAr/FilAr PLA Manteca.json"
+		},
+		{
+			"name": "FilAr PLA Marron Oxido",
+			"sub_path": "filament/FilAr/FilAr PLA Marron Oxido.json"
+		},
+		{
+			"name": "FilAr PLA Naranja Tigre",
+			"sub_path": "filament/FilAr/FilAr PLA Naranja Tigre.json"
+		},
+		{
+			"name": "FilAr PLA Negro Azabache",
+			"sub_path": "filament/FilAr/FilAr PLA Negro Azabache.json"
+		},
+		{
+			"name": "FilAr PLA Oro",
+			"sub_path": "filament/FilAr/FilAr PLA Oro.json"
+		},
+		{
+			"name": "FilAr PLA Piel",
+			"sub_path": "filament/FilAr/FilAr PLA Piel.json"
+		},
+		{
+			"name": "FilAr PLA Rojo de Carreras",
+			"sub_path": "filament/FilAr/FilAr PLA Rojo de Carreras.json"
+		},
+		{
+			"name": "FilAr PLA Rosa Amaranto",
+			"sub_path": "filament/FilAr/FilAr PLA Rosa Amaranto.json"
+		},
+		{
+			"name": "FilAr PLA Rosa Flamenco",
+			"sub_path": "filament/FilAr/FilAr PLA Rosa Flamenco.json"
+		},
+		{
+			"name": "FilAr PLA Tabaco",
+			"sub_path": "filament/FilAr/FilAr PLA Tabaco.json"
+		},
+		{
+			"name": "FilAr PLA Titanio",
+			"sub_path": "filament/FilAr/FilAr PLA Titanio.json"
+		},
+		{
+			"name": "FilAr PLA Verde FilAr",
+			"sub_path": "filament/FilAr/FilAr PLA Verde FilAr.json"
+		},
+		{
+			"name": "FilAr PLA Verde Manzana",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Manzana.json"
+		},
+		{
+			"name": "FilAr PLA Verde Oliva",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Oliva.json"
+		},
+		{
+			"name": "FilAr PLA Verde Pixel",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Pixel.json"
+		},
+		{
+			"name": "FilAr PLA Violeta Jacaranda",
+			"sub_path": "filament/FilAr/FilAr PLA Violeta Jacaranda.json"
+		},
+		{
+			"name": "FilAr PLA-mate Amarillo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Amarillo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Azul",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Azul.json"
+		},
+		{
+			"name": "FilAr PLA-mate Beige",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Beige.json"
+		},
+		{
+			"name": "FilAr PLA-mate Blanco",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Blanco.json"
+		},
+		{
+			"name": "FilAr PLA-mate Bordo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Bordo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Celeste Cielo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Celeste Cielo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Chocolate",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Chocolate.json"
+		},
+		{
+			"name": "FilAr PLA-mate Gris",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Gris.json"
+		},
+		{
+			"name": "FilAr PLA-mate Marron",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Marron.json"
+		},
+		{
+			"name": "FilAr PLA-mate Naranja",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Naranja.json"
+		},
+		{
+			"name": "FilAr PLA-mate Negro",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Negro.json"
+		},
+		{
+			"name": "FilAr PLA-mate Piel",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Piel.json"
+		},
+		{
+			"name": "FilAr PLA-mate Rojo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Rojo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Rosa",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Rosa.json"
+		},
+		{
+			"name": "FilAr PLA-mate Uva",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Uva.json"
+		},
+		{
+			"name": "FilAr PLA-mate Verde",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Verde.json"
+		},
+		{
+			"name": "FilAr PLA-mate Violeta",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Violeta.json"
+		},
+		{
+			"name": "Generic PLA Matte @System",
+			"sub_path": "filament/Generic PLA Matte @System.json"
+		},
 		{
 			"name": "NIT PLA @System",
 			"sub_path": "filament/NIT/NIT PLA @System.json"
@@ -1876,10 +1780,6 @@
 			"name": "PolyLite Dual PLA @base",
 			"sub_path": "filament/Polymaker/PolyLite Dual PLA @base.json"
 		},
-		{
-			"name": "PolyLite Dual PLA @System",
-			"sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
-		},
 		{
 			"name": "PolyLite PLA @System",
 			"sub_path": "filament/Polymaker/PolyLite PLA @System.json"
@@ -1976,6 +1876,14 @@
 			"name": "FILL3D PPCF @System",
 			"sub_path": "filament/FILL3D/FILL3D PPCF @System.json"
 		},
+		{
+			"name": "Generic PP-CF @System",
+			"sub_path": "filament/Generic PP-CF @System.json"
+		},
+		{
+			"name": "Generic PP-GF @System",
+			"sub_path": "filament/Generic PP-GF @System.json"
+		},
 		{
 			"name": "Bambu PPA-CF @System",
 			"sub_path": "filament/Bambu/Bambu PPA-CF @System.json"
@@ -2024,10 +1932,6 @@
 			"name": "Elegoo Rapid TPU 95A @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @base.json"
 		},
-		{
-			"name": "Elegoo Rapid TPU 95A @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @System.json"
-		},
 		{
 			"name": "Elegoo TPU 95A @System",
 			"sub_path": "filament/Elegoo/Elegoo TPU 95A @System.json"
@@ -2040,6 +1944,14 @@
 			"name": "Overture TPU @System",
 			"sub_path": "filament/Overture/Overture TPU @System.json"
 		},
+		{
+			"name": "Elegoo ASA-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo ASA-CF @System.json"
+		},
+		{
+			"name": "Elegoo PC-FR @System",
+			"sub_path": "filament/Elegoo/Elegoo PC-FR @System.json"
+		},
 		{
 			"name": "AliZ PETG-CF @System",
 			"sub_path": "filament/AliZ/AliZ PETG-CF @System.json"
@@ -2048,9 +1960,97 @@
 			"name": "AliZ PETG-Metal @System",
 			"sub_path": "filament/AliZ/AliZ PETG-Metal @System.json"
 		},
+		{
+			"name": "Elegoo PET-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PET-CF @System.json"
+		},
+		{
+			"name": "Elegoo PETG HF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG HF @System.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG PRO @System.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @System.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG-CF @System.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG-GF @System.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @System.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Basic @System.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @System.json"
+		},
+		{
+			"name": "Elegoo PLA Glow @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Glow @System.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Marble @System.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Matte @System.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA PRO @System.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Silk @System.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @System.json"
+		},
+		{
+			"name": "Elegoo PLA Translucent2 @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @System.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Wood @System.json"
+		},
+		{
+			"name": "Elegoo PLA+ @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA+ @System.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA-CF @System.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @System.json"
+		},
+		{
+			"name": "PolyLite Dual PLA @System",
+			"sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
+		},
 		{
 			"name": "COEX PLA+Silk @System",
 			"sub_path": "filament/COEX/COEX PLA+Silk @System.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @System.json"
 		}
 	],
 	"process_list": [],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json
index c234e34567..36849ed63d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json	
@@ -23,12 +23,6 @@
 	"nozzle_temperature_initial_layer": [
 		"255"
 	],
-	"bed_temperature": [
-		"100"
-	],
-	"bed_temperature_initial_layer": [
-		"100"
-	],
 	"temperature_vitrification": [
 		"100"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json
index 7e965bc256..833356e37a 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json	
@@ -23,12 +23,6 @@
 	"nozzle_temperature_initial_layer": [
 		"255"
 	],
-	"bed_temperature": [
-		"100"
-	],
-	"bed_temperature_initial_layer": [
-		"100"
-	],
 	"temperature_vitrification": [
 		"100"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json
index 1bc1230eae..207c17790d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"265"
 	],
-	"bed_temperature": [
-		"100"
-	],
-	"bed_temperature_initial_layer": [
-		"100"
-	],
 	"temperature_vitrification": [
 		"95"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json
index c023668f4a..cc924787f8 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json	
@@ -23,12 +23,6 @@
 	"nozzle_temperature_initial_layer": [
 		"285"
 	],
-	"bed_temperature": [
-		"100"
-	],
-	"bed_temperature_initial_layer": [
-		"100"
-	],
 	"temperature_vitrification": [
 		"170"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json
index 15de223500..504c6dde2b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json	
@@ -23,12 +23,6 @@
 	"nozzle_temperature_initial_layer": [
 		"260"
 	],
-	"bed_temperature": [
-		"100"
-	],
-	"bed_temperature_initial_layer": [
-		"100"
-	],
 	"temperature_vitrification": [
 		"100"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json
index 9fce322405..f15437f295 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"275"
 	],
-	"bed_temperature": [
-		"80"
-	],
-	"bed_temperature_initial_layer": [
-		"85"
-	],
 	"temperature_vitrification": [
 		"80"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json
index 9f22293450..39afcd6759 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"250"
 	],
-	"bed_temperature": [
-		"80"
-	],
-	"bed_temperature_initial_layer": [
-		"85"
-	],
 	"temperature_vitrification": [
 		"70"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json
index a0b2f76888..cc9b7f8e54 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json	
@@ -23,12 +23,6 @@
 	"nozzle_temperature_initial_layer": [
 		"235"
 	],
-	"bed_temperature": [
-		"60"
-	],
-	"bed_temperature_initial_layer": [
-		"60"
-	],
 	"temperature_vitrification": [
 		"55"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json
index a9a5e83c0b..b2cc99d390 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"240"
 	],
-	"bed_temperature": [
-		"60"
-	],
-	"bed_temperature_initial_layer": [
-		"60"
-	],
 	"temperature_vitrification": [
 		"60"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json
index f06642c432..d5c9a7a87d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"245"
 	],
-	"bed_temperature": [
-		"60"
-	],
-	"bed_temperature_initial_layer": [
-		"60"
-	],
 	"temperature_vitrification": [
 		"55"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json
index 5c715dea33..35e3c75bc3 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"240"
 	],
-	"bed_temperature": [
-		"30"
-	],
-	"bed_temperature_initial_layer": [
-		"35"
-	],
 	"temperature_vitrification": [
 		"60"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json
index 81d5d81f1c..b6f622635f 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"240"
 	],
-	"bed_temperature": [
-		"30"
-	],
-	"bed_temperature_initial_layer": [
-		"35"
-	],
 	"temperature_vitrification": [
 		"60"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json
index b2e0aab688..d1c1d2963f 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"240"
 	],
-	"bed_temperature": [
-		"30"
-	],
-	"bed_temperature_initial_layer": [
-		"35"
-	],
 	"temperature_vitrification": [
 		"60"
 	],
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json
index 027ff45226..0338bb2929 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json	
@@ -24,12 +24,6 @@
 	"nozzle_temperature_initial_layer": [
 		"225"
 	],
-	"bed_temperature": [
-		"0"
-	],
-	"bed_temperature_initial_layer": [
-		"0"
-	],
 	"temperature_vitrification": [
 		"60"
 	],
diff --git a/resources/profiles/Peopoly.json b/resources/profiles/Peopoly.json
index 2a73d251f1..9b95c24bb3 100644
--- a/resources/profiles/Peopoly.json
+++ b/resources/profiles/Peopoly.json
@@ -1,6 +1,6 @@
 {
 	"name": "Peopoly",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Peopoly configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Peopoly/machine/fdm_klipper_common.json b/resources/profiles/Peopoly/machine/fdm_klipper_common.json
index e9a5185767..00e4209105 100644
--- a/resources/profiles/Peopoly/machine/fdm_klipper_common.json
+++ b/resources/profiles/Peopoly/machine/fdm_klipper_common.json
@@ -119,7 +119,6 @@
 	"z_hop_types": [
 		"Auto Lift"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE",
diff --git a/resources/profiles/Peopoly/machine/fdm_machine_common.json b/resources/profiles/Peopoly/machine/fdm_machine_common.json
index f6bd23139c..c47cfdced1 100644
--- a/resources/profiles/Peopoly/machine/fdm_machine_common.json
+++ b/resources/profiles/Peopoly/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Peopoly/process/fdm_process_common.json b/resources/profiles/Peopoly/process/fdm_process_common.json
index 5e2f73458e..9b48c69b28 100644
--- a/resources/profiles/Peopoly/process/fdm_process_common.json
+++ b/resources/profiles/Peopoly/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json
index d4da354499..014fdb8ffb 100644
--- a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json
+++ b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Peopoly/process/fdm_process_pply_common.json b/resources/profiles/Peopoly/process/fdm_process_pply_common.json
index be008f5478..1bfb430465 100644
--- a/resources/profiles/Peopoly/process/fdm_process_pply_common.json
+++ b/resources/profiles/Peopoly/process/fdm_process_pply_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "80",
diff --git a/resources/profiles/Phrozen.json b/resources/profiles/Phrozen.json
index 0c711816c1..f07568bb29 100644
--- a/resources/profiles/Phrozen.json
+++ b/resources/profiles/Phrozen.json
@@ -1,6 +1,6 @@
 {
 	"name": "Phrozen",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Phrozen configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json
index d909765bad..c53abee956 100644
--- a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json	
+++ b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Phrozen Arco 0.4 nozzle",
-	"inherits": "Generic PLA @System",
 	"renamed_from": "Phrozen PLA @Phrozen Arco 0.4 nozzle;Phrozen PLA Phrozen Arco 0.4 nozzle",
+	"inherits": "Generic PLA @System",
 	"from": "system",
 	"setting_id": "xTeHmDOY48Bik10J",
 	"instantiation": "true",
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"31.925"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"24.75"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json
index c34d188507..963b3b4727 100644
--- a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json	
+++ b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json	
@@ -202,7 +202,6 @@
 		"45"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "0",
diff --git a/resources/profiles/Phrozen/machine/_fdm_machine_common.json b/resources/profiles/Phrozen/machine/_fdm_machine_common.json
deleted file mode 100644
index 823f9a173b..0000000000
--- a/resources/profiles/Phrozen/machine/_fdm_machine_common.json
+++ /dev/null
@@ -1,139 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "marlin",
-	"machine_start_gcode": "",
-	"machine_end_gcode": "",
-	"extruder_colour": [
-		"#018001"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"3000",
-		"3000"
-	],
-	"machine_max_acceleration_x": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_y": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_z": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"12",
-		"12"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"0.2",
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"max_layer_height": [
-		"0.3"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "300",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_settings_id": "",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_pause_gcode": "M400 U1\n",
-	"wipe": [
-		"1"
-	],
-	"z_hop_types": "Normal Lift"
-}
diff --git a/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json
index 74be068c38..d4bb3d5479 100644
--- a/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json	
+++ b/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json	
@@ -127,8 +127,6 @@
 	"overhang_reverse": "0",
 	"overhang_reverse_internal_only": "0",
 	"overhang_reverse_threshold": "50%",
-	"overhang_speed_classic": "1",
-	"overhang_totally_speed": "10",
 	"post_process": [],
 	"precise_outer_wall": "1",
 	"precise_z_height": "0",
diff --git a/resources/profiles/Phrozen/process/fdm_process_common.json b/resources/profiles/Phrozen/process/fdm_process_common.json
index 868bbc1a2e..f813b8fa7f 100644
--- a/resources/profiles/Phrozen/process/fdm_process_common.json
+++ b/resources/profiles/Phrozen/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -78,7 +77,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_surface_line_width": "0.4",
diff --git a/resources/profiles/Positron3D.json b/resources/profiles/Positron3D.json
index d8e066ce73..d8008abb55 100644
--- a/resources/profiles/Positron3D.json
+++ b/resources/profiles/Positron3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "Positron 3D",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Positron 3D Printer Profile",
 	"machine_model_list": [
diff --git a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
index 4226a5a0e4..68e95b626e 100644
--- a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
+++ b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
@@ -117,7 +117,6 @@
 		"40"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Positron3D/machine/fdm_machine_common.json b/resources/profiles/Positron3D/machine/fdm_machine_common.json
index 11833be972..a07212bae7 100644
--- a/resources/profiles/Positron3D/machine/fdm_machine_common.json
+++ b/resources/profiles/Positron3D/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Positron3D/process/fdm_process_common.json b/resources/profiles/Positron3D/process/fdm_process_common.json
index b8e882770a..0d558129af 100644
--- a/resources/profiles/Positron3D/process/fdm_process_common.json
+++ b/resources/profiles/Positron3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -83,7 +82,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json
index ecbbe179e7..723874f67d 100644
--- a/resources/profiles/Prusa.json
+++ b/resources/profiles/Prusa.json
@@ -1,6 +1,6 @@
 {
 	"name": "Prusa",
-	"version": "02.04.00.04",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "Prusa configurations",
 	"machine_model_list": [
@@ -1448,34 +1448,10 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Generic ABS @Prusa base",
-			"sub_path": "filament/Generic ABS @Prusa base.json"
-		},
-		{
-			"name": "Generic ABS @Prusa",
-			"sub_path": "filament/Generic ABS @Prusa.json"
-		},
 		{
 			"name": "Generic ABS @Prusa CORE One",
 			"sub_path": "filament/Generic ABS @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MINIIS",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK3.5",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5.json"
@@ -1492,37 +1468,13 @@
 			"name": "Generic ABS @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MK4",
-			"sub_path": "filament/Generic ABS @Prusa MK4.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK4S",
 			"sub_path": "filament/Generic ABS @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic ABS @Prusa XL",
-			"sub_path": "filament/Generic ABS @Prusa XL.json"
-		},
-		{
-			"name": "Generic ABS @Prusa XL 5T",
-			"sub_path": "filament/Generic ABS @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa base",
-			"sub_path": "filament/Generic ABS HF @Prusa base.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
+			"name": "Generic ABS @Prusa base",
+			"sub_path": "filament/Generic ABS @Prusa base.json"
 		},
 		{
 			"name": "Generic ABS HF @Prusa MK3.5",
@@ -1536,6 +1488,10 @@
 			"name": "Generic ABS HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ABS HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic ABS HF @Prusa base",
+			"sub_path": "filament/Generic ABS HF @Prusa base.json"
+		},
 		{
 			"name": "Generic ASA @Prusa",
 			"sub_path": "filament/Generic ASA @Prusa.json"
@@ -1584,22 +1540,6 @@
 			"name": "Generic ASA @Prusa MK4S",
 			"sub_path": "filament/Generic ASA @Prusa MK4S.json"
 		},
-		{
-			"name": "Generic ASA HF @Prusa base",
-			"sub_path": "filament/Generic ASA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic ASA HF @Prusa MK3.5",
 			"sub_path": "filament/Generic ASA HF @Prusa MK3.5.json"
@@ -1612,6 +1552,10 @@
 			"name": "Generic ASA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ASA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic ASA HF @Prusa base",
+			"sub_path": "filament/Generic ASA HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament ASA @CORE One",
 			"sub_path": "filament/Prusament ASA @CORE One.json"
@@ -1636,30 +1580,6 @@
 			"name": "Generic TPU @Prusa CORE One",
 			"sub_path": "filament/Generic TPU @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PA @Prusa base",
-			"sub_path": "filament/Generic PA @Prusa base.json"
-		},
-		{
-			"name": "Generic PA @Prusa",
-			"sub_path": "filament/Generic PA @Prusa.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS",
-			"sub_path": "filament/Generic PA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PA @Prusa MK3.5",
 			"sub_path": "filament/Generic PA @Prusa MK3.5.json"
@@ -1677,28 +1597,8 @@
 			"sub_path": "filament/Generic PA @Prusa MK3.5 0.8.json"
 		},
 		{
-			"name": "Generic PA-CF @Prusa base",
-			"sub_path": "filament/Generic PA-CF @Prusa base.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa",
-			"sub_path": "filament/Generic PA-CF @Prusa.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.8.json"
+			"name": "Generic PA @Prusa base",
+			"sub_path": "filament/Generic PA @Prusa base.json"
 		},
 		{
 			"name": "Generic PA-CF @Prusa MK3.5",
@@ -1716,6 +1616,10 @@
 			"name": "Generic PA-CF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PA-CF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PA-CF @Prusa base",
+			"sub_path": "filament/Generic PA-CF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PA-CF @CORE One",
 			"sub_path": "filament/Prusament PA-CF @CORE One.json"
@@ -1764,22 +1668,6 @@
 			"name": "Generic PC @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PC @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PC HF @Prusa base",
-			"sub_path": "filament/Generic PC HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PC HF @Prusa MK3.5",
 			"sub_path": "filament/Generic PC HF @Prusa MK3.5.json"
@@ -1792,6 +1680,10 @@
 			"name": "Generic PC HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PC HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PC HF @Prusa base",
+			"sub_path": "filament/Generic PC HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PC Blend @CORE One",
 			"sub_path": "filament/Prusament PC Blend @CORE One.json"
@@ -1816,34 +1708,10 @@
 			"name": "Prusament PC-CF @XL 5T",
 			"sub_path": "filament/Prusament PC-CF @XL 5T.json"
 		},
-		{
-			"name": "Generic PETG @Prusa base",
-			"sub_path": "filament/Generic PETG @Prusa base.json"
-		},
-		{
-			"name": "Generic PETG @Prusa",
-			"sub_path": "filament/Generic PETG @Prusa.json"
-		},
 		{
 			"name": "Generic PETG @Prusa CORE One",
 			"sub_path": "filament/Generic PETG @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MINIIS",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PETG @Prusa MK3.5",
 			"sub_path": "filament/Generic PETG @Prusa MK3.5.json"
@@ -1860,37 +1728,13 @@
 			"name": "Generic PETG @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PETG @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MK4",
-			"sub_path": "filament/Generic PETG @Prusa MK4.json"
-		},
 		{
 			"name": "Generic PETG @Prusa MK4S",
 			"sub_path": "filament/Generic PETG @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic PETG @Prusa XL",
-			"sub_path": "filament/Generic PETG @Prusa XL.json"
-		},
-		{
-			"name": "Generic PETG @Prusa XL 5T",
-			"sub_path": "filament/Generic PETG @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa base",
-			"sub_path": "filament/Generic PETG HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PETG @Prusa base",
+			"sub_path": "filament/Generic PETG @Prusa base.json"
 		},
 		{
 			"name": "Generic PETG HF @Prusa MK3.5",
@@ -1904,6 +1748,10 @@
 			"name": "Generic PETG HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PETG HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PETG HF @Prusa base",
+			"sub_path": "filament/Generic PETG HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PETG @CORE One",
 			"sub_path": "filament/Prusament PETG @CORE One.json"
@@ -1912,42 +1760,10 @@
 			"name": "Prusament PETG @base",
 			"sub_path": "filament/Prusament PETG @base.json"
 		},
-		{
-			"name": "Prusament PETG @XL",
-			"sub_path": "filament/Prusament PETG @XL.json"
-		},
-		{
-			"name": "Prusament PETG @XL 5T",
-			"sub_path": "filament/Prusament PETG @XL 5T.json"
-		},
-		{
-			"name": "Generic PLA @Prusa base",
-			"sub_path": "filament/Generic PLA @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA @Prusa",
-			"sub_path": "filament/Generic PLA @Prusa.json"
-		},
 		{
 			"name": "Generic PLA @Prusa CORE One",
 			"sub_path": "filament/Generic PLA @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK3.5",
 			"sub_path": "filament/Generic PLA @Prusa MK3.5.json"
@@ -1964,37 +1780,13 @@
 			"name": "Generic PLA @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MK4",
-			"sub_path": "filament/Generic PLA @Prusa MK4.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK4S",
 			"sub_path": "filament/Generic PLA @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic PLA @Prusa XL",
-			"sub_path": "filament/Generic PLA @Prusa XL.json"
-		},
-		{
-			"name": "Generic PLA @Prusa XL 5T",
-			"sub_path": "filament/Generic PLA @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa base",
-			"sub_path": "filament/Generic PLA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PLA @Prusa base",
+			"sub_path": "filament/Generic PLA @Prusa base.json"
 		},
 		{
 			"name": "Generic PLA HF @Prusa MK3.5",
@@ -2008,34 +1800,14 @@
 			"name": "Generic PLA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PLA HF @Prusa base",
+			"sub_path": "filament/Generic PLA HF @Prusa base.json"
+		},
 		{
 			"name": "Generic PLA Silk @Prusa CORE One",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PLA-CF @Prusa base",
-			"sub_path": "filament/Generic PLA-CF @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa",
-			"sub_path": "filament/Generic PLA-CF @Prusa.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PLA-CF @Prusa MK3.5",
 			"sub_path": "filament/Generic PLA-CF @Prusa MK3.5.json"
@@ -2052,6 +1824,10 @@
 			"name": "Generic PLA-CF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA-CF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PLA-CF @Prusa base",
+			"sub_path": "filament/Generic PLA-CF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PLA @CORE One",
 			"sub_path": "filament/Prusament PLA @CORE One.json"
@@ -2060,14 +1836,6 @@
 			"name": "Prusament PLA @base",
 			"sub_path": "filament/Prusament PLA @base.json"
 		},
-		{
-			"name": "Prusament PLA @XL",
-			"sub_path": "filament/Prusament PLA @XL.json"
-		},
-		{
-			"name": "Prusament PLA @XL 5T",
-			"sub_path": "filament/Prusament PLA @XL 5T.json"
-		},
 		{
 			"name": "Prusament rPLA @CORE One",
 			"sub_path": "filament/Prusament rPLA @CORE One.json"
@@ -2076,38 +1844,6 @@
 			"name": "Prusament rPLA @base",
 			"sub_path": "filament/Prusament rPLA @base.json"
 		},
-		{
-			"name": "Prusament rPLA @XL",
-			"sub_path": "filament/Prusament rPLA @XL.json"
-		},
-		{
-			"name": "Prusament rPLA @XL 5T",
-			"sub_path": "filament/Prusament rPLA @XL 5T.json"
-		},
-		{
-			"name": "Generic PVA @Prusa base",
-			"sub_path": "filament/Generic PVA @Prusa base.json"
-		},
-		{
-			"name": "Generic PVA @Prusa",
-			"sub_path": "filament/Generic PVA @Prusa.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PVA @Prusa MK3.5",
 			"sub_path": "filament/Generic PVA @Prusa MK3.5.json"
@@ -2125,20 +1861,8 @@
 			"sub_path": "filament/Generic PVA @Prusa MK3.5 0.8.json"
 		},
 		{
-			"name": "Generic PVA HF @Prusa base",
-			"sub_path": "filament/Generic PVA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PVA @Prusa base",
+			"sub_path": "filament/Generic PVA @Prusa base.json"
 		},
 		{
 			"name": "Generic PVA HF @Prusa MK3.5",
@@ -2152,6 +1876,10 @@
 			"name": "Generic PVA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PVA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PVA HF @Prusa base",
+			"sub_path": "filament/Generic PVA HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PVB @CORE One",
 			"sub_path": "filament/Prusament PVB @CORE One.json"
@@ -2164,42 +1892,26 @@
 			"name": "Prusament PVB @XL 5T",
 			"sub_path": "filament/Prusament PVB @XL 5T.json"
 		},
-		{
-			"name": "Generic TPU @Prusa base",
-			"sub_path": "filament/Generic TPU @Prusa base.json"
-		},
-		{
-			"name": "Generic TPU @Prusa",
-			"sub_path": "filament/Generic TPU @Prusa.json"
-		},
-		{
-			"name": "Generic TPU @Prusa MINIIS",
-			"sub_path": "filament/Generic TPU @Prusa MINIIS.json"
-		},
 		{
 			"name": "Generic TPU @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU @Prusa MK3.5.json"
 		},
-		{
-			"name": "Generic TPU @Prusa MK4",
-			"sub_path": "filament/Generic TPU @Prusa MK4.json"
-		},
 		{
 			"name": "Generic TPU @Prusa MK4S",
 			"sub_path": "filament/Generic TPU @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic TPU HF @Prusa base",
-			"sub_path": "filament/Generic TPU HF @Prusa base.json"
-		},
-		{
-			"name": "Generic TPU HF @Prusa MINIIS",
-			"sub_path": "filament/Generic TPU HF @Prusa MINIIS.json"
+			"name": "Generic TPU @Prusa base",
+			"sub_path": "filament/Generic TPU @Prusa base.json"
 		},
 		{
 			"name": "Generic TPU HF @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU HF @Prusa MK3.5.json"
 		},
+		{
+			"name": "Generic TPU HF @Prusa base",
+			"sub_path": "filament/Generic TPU HF @Prusa base.json"
+		},
 		{
 			"name": "Generic ABS @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic ABS @Prusa CORE One 0.6.json"
@@ -2236,6 +1948,50 @@
 			"name": "Generic ABS @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic ABS @Prusa",
+			"sub_path": "filament/Generic ABS @Prusa.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MK4",
+			"sub_path": "filament/Generic ABS @Prusa MK4.json"
+		},
+		{
+			"name": "Generic ABS @Prusa XL",
+			"sub_path": "filament/Generic ABS @Prusa XL.json"
+		},
+		{
+			"name": "Generic ABS @Prusa XL 5T",
+			"sub_path": "filament/Generic ABS @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Generic ASA @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
@@ -2272,6 +2028,18 @@
 			"name": "Generic ASA @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ASA @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament ASA @CORE One 0.6",
 			"sub_path": "filament/Prusament ASA @CORE One 0.6.json"
@@ -2304,6 +2072,46 @@
 			"name": "Generic TPU @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PA @Prusa",
+			"sub_path": "filament/Generic PA @Prusa.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS",
+			"sub_path": "filament/Generic PA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa",
+			"sub_path": "filament/Generic PA-CF @Prusa.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PA-CF @CORE One 0.6",
 			"sub_path": "filament/Prusament PA-CF @CORE One 0.6.json"
@@ -2312,6 +2120,18 @@
 			"name": "Prusament PA-CF @CORE One 0.8",
 			"sub_path": "filament/Prusament PA-CF @CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PC Blend @CORE One 0.6",
 			"sub_path": "filament/Prusament PC Blend @CORE One 0.6.json"
@@ -2380,6 +2200,50 @@
 			"name": "Generic PETG @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic PETG @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic PETG @Prusa",
+			"sub_path": "filament/Generic PETG @Prusa.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MK4",
+			"sub_path": "filament/Generic PETG @Prusa MK4.json"
+		},
+		{
+			"name": "Generic PETG @Prusa XL",
+			"sub_path": "filament/Generic PETG @Prusa XL.json"
+		},
+		{
+			"name": "Generic PETG @Prusa XL 5T",
+			"sub_path": "filament/Generic PETG @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PETG @CORE One 0.6",
 			"sub_path": "filament/Prusament PETG @CORE One 0.6.json"
@@ -2404,6 +2268,14 @@
 			"name": "Prusament PETG @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PETG @XL",
+			"sub_path": "filament/Prusament PETG @XL.json"
+		},
+		{
+			"name": "Prusament PETG @XL 5T",
+			"sub_path": "filament/Prusament PETG @XL 5T.json"
+		},
 		{
 			"name": "Generic PLA @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic PLA @Prusa CORE One 0.6.json"
@@ -2444,6 +2316,50 @@
 			"name": "Generic PLA Silk @Prusa MK4S",
 			"sub_path": "filament/Generic PLA Silk @Prusa MK4S.json"
 		},
+		{
+			"name": "Generic PLA @Prusa",
+			"sub_path": "filament/Generic PLA @Prusa.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MK4",
+			"sub_path": "filament/Generic PLA @Prusa MK4.json"
+		},
+		{
+			"name": "Generic PLA @Prusa XL",
+			"sub_path": "filament/Generic PLA @Prusa XL.json"
+		},
+		{
+			"name": "Generic PLA @Prusa XL 5T",
+			"sub_path": "filament/Generic PLA @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Generic PLA Silk @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
@@ -2452,6 +2368,26 @@
 			"name": "Generic PLA Silk @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PLA-CF @Prusa",
+			"sub_path": "filament/Generic PLA-CF @Prusa.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PLA @CORE One 0.6",
 			"sub_path": "filament/Prusament PLA @CORE One 0.6.json"
@@ -2476,6 +2412,14 @@
 			"name": "Prusament PLA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PLA @XL",
+			"sub_path": "filament/Prusament PLA @XL.json"
+		},
+		{
+			"name": "Prusament PLA @XL 5T",
+			"sub_path": "filament/Prusament PLA @XL 5T.json"
+		},
 		{
 			"name": "Prusament rPLA @CORE One 0.6",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.6.json"
@@ -2484,6 +2428,46 @@
 			"name": "Prusament rPLA @CORE One 0.8",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
 		},
+		{
+			"name": "Prusament rPLA @XL",
+			"sub_path": "filament/Prusament rPLA @XL.json"
+		},
+		{
+			"name": "Prusament rPLA @XL 5T",
+			"sub_path": "filament/Prusament rPLA @XL 5T.json"
+		},
+		{
+			"name": "Generic PVA @Prusa",
+			"sub_path": "filament/Generic PVA @Prusa.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PVB @CORE One 0.6",
 			"sub_path": "filament/Prusament PVB @CORE One 0.6.json"
@@ -2500,6 +2484,22 @@
 			"name": "Generic TPU @Prusa MK4S 0.8",
 			"sub_path": "filament/Generic TPU @Prusa MK4S 0.8.json"
 		},
+		{
+			"name": "Generic TPU @Prusa",
+			"sub_path": "filament/Generic TPU @Prusa.json"
+		},
+		{
+			"name": "Generic TPU @Prusa MINIIS",
+			"sub_path": "filament/Generic TPU @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic TPU @Prusa MK4",
+			"sub_path": "filament/Generic TPU @Prusa MK4.json"
+		},
+		{
+			"name": "Generic TPU HF @Prusa MINIIS",
+			"sub_path": "filament/Generic TPU HF @Prusa MINIIS.json"
+		},
 		{
 			"name": "Generic ABS @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.5.json"
diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json
index 7d53f66645..ee328ff399 100644
--- a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Prusa XL 5T",
-	"inherits": "Generic ABS @Prusa base",
 	"renamed_from": "Prusa Generic ABS @XL 5T;Prusa Generic ABS XL 5T",
+	"inherits": "Generic ABS @Prusa base",
 	"from": "system",
 	"setting_id": "XfavDzEzzrXDQVUC",
 	"instantiation": "true",
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json
index abf7986c12..f6a0a45d88 100644
--- a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json	
+++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Prusa XL",
-	"inherits": "Generic ABS @Prusa base",
 	"renamed_from": "Prusa Generic ABS @XL;Prusa Generic ABS XL",
+	"inherits": "Generic ABS @Prusa base",
 	"from": "system",
 	"setting_id": "HYHkGEjr6Kid2Xg2",
 	"instantiation": "true",
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json
index c0501006d2..9be4ea1ba0 100644
--- a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic FLEX @Prusa XL 5T",
-	"inherits": "fdm_filament_flex",
 	"renamed_from": "Prusa Generic FLEX @XL 5T;Prusa Generic FLEX XL 5T",
+	"inherits": "fdm_filament_flex",
 	"from": "system",
 	"setting_id": "ef8fSryRYselyr4G",
 	"filament_id": "OFbPuPKY",
@@ -11,8 +11,6 @@
 	"filament_loading_speed": "28",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "90",
-	"filament_load_time": "0",
-	"filament_unload_time": "0",
 	"filament_cooling_moves": "4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_final_speed": "3.4",
diff --git a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json
index ea56f3a8b5..24f34f49ab 100644
--- a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json	
+++ b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic FLEX @Prusa XL",
-	"inherits": "fdm_filament_flex",
 	"renamed_from": "Prusa Generic FLEX @XL;Prusa Generic FLEX XL",
+	"inherits": "fdm_filament_flex",
 	"from": "system",
 	"setting_id": "qrFWrwgQSXgU7oCb",
 	"filament_id": "OFbPuPKY",
@@ -11,8 +11,6 @@
 	"filament_loading_speed": "28",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "90",
-	"filament_load_time": "0",
-	"filament_unload_time": "0",
 	"filament_cooling_moves": "4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_final_speed": "3.4",
diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json
index 9f70295142..52e208e7c9 100644
--- a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Prusa XL 5T",
-	"inherits": "Generic PETG @Prusa base",
 	"renamed_from": "Prusa Generic PETG @XL 5T;Prusa Generic PETG XL 5T",
+	"inherits": "Generic PETG @Prusa base",
 	"from": "system",
 	"setting_id": "DNJECSjW6zKYALxE",
 	"instantiation": "true",
@@ -37,8 +37,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "3",
 	"filament_cooling_initial_speed": "5",
 	"filament_cooling_final_speed": "2.5",
diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json
index 0cdcbfc1c4..78a3e589b2 100644
--- a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json	
+++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Prusa XL",
-	"inherits": "Generic PETG @Prusa base",
 	"renamed_from": "Prusa Generic PETG @XL;Prusa Generic PETG XL",
+	"inherits": "Generic PETG @Prusa base",
 	"from": "system",
 	"setting_id": "8vcNv4b4H7aYA01G",
 	"instantiation": "true",
@@ -37,8 +37,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "3",
 	"filament_cooling_initial_speed": "5",
 	"filament_cooling_final_speed": "2.5",
diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json
index 6dbefec6be..532ccba57a 100644
--- a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Prusa XL 5T",
-	"inherits": "Generic PLA @Prusa base",
 	"renamed_from": "Prusa Generic PLA @XL 5T;Prusa Generic PLA XL 5T",
+	"inherits": "Generic PLA @Prusa base",
 	"from": "system",
 	"setting_id": "wDxtZLt5J2JODMBq",
 	"instantiation": "true",
@@ -34,8 +34,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json
index ff8f343b41..4e560f4bac 100644
--- a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json	
+++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json	
@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Prusa XL",
-	"inherits": "Generic PLA @Prusa base",
 	"renamed_from": "Prusa Generic PLA @XL;Prusa Generic PLA XL",
+	"inherits": "Generic PLA @Prusa base",
 	"from": "system",
 	"setting_id": "27u5AiklUhmExsys",
 	"instantiation": "true",
@@ -34,8 +34,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json
index fdb63e2e68..43aed0f993 100644
--- a/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json	
@@ -6,7 +6,9 @@
 	"setting_id": "IQu91UAWOJOQcUq9",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "260",
 	"nozzle_temperature": "260",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL.json b/resources/profiles/Prusa/filament/Prusament ASA @XL.json
index c07021a9c3..d118538809 100644
--- a/resources/profiles/Prusa/filament/Prusament ASA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament ASA @XL.json	
@@ -6,7 +6,9 @@
 	"setting_id": "RaEoFoZdXkkOz9yh",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "260",
 	"nozzle_temperature": "260",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json
index af306fd2a7..80a9653148 100644
--- a/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json	
@@ -6,7 +6,9 @@
 	"setting_id": "FYerOcjToJ3ABpu1",
 	"filament_id": "OF54SvEe",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "275",
 	"nozzle_temperature": "285",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json
index f843be92a0..957a27f8cc 100644
--- a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json	
@@ -6,7 +6,9 @@
 	"setting_id": "IrL4iU2kkMBHIw3e",
 	"filament_id": "OF54SvEe",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "275",
 	"nozzle_temperature": "285",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json
index 922492ce7c..ff60e677cb 100644
--- a/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json	
@@ -41,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json
index 2ea273902c..d3fdac3873 100644
--- a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json	
@@ -41,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json
index 0c6d1a3cdb..7ef720791d 100644
--- a/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json	
@@ -6,7 +6,9 @@
 	"setting_id": "m1YND6uz3GWeVIBG",
 	"filament_id": "OFjz0a3m",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "285",
 	"nozzle_temperature": "285",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json
index 572b970d02..44abf2918e 100644
--- a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json	
@@ -6,7 +6,9 @@
 	"setting_id": "Eq5x2CcEUUAZ5aof",
 	"filament_id": "OFjz0a3m",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "285",
 	"nozzle_temperature": "285",
 	"hot_plate_temp_initial_layer": "100",
@@ -39,8 +41,6 @@
 	"filament_loading_speed": "14",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "20",
-	"filament_load_time": "15",
-	"filament_unload_time": "12",
 	"filament_cooling_moves": "5",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "50",
diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json
index e0db59fde9..95e9ecc79b 100644
--- a/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json	
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "3",
 	"filament_cooling_initial_speed": "5",
 	"filament_cooling_final_speed": "2.5",
diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL.json b/resources/profiles/Prusa/filament/Prusament PETG @XL.json
index f26140a0eb..56c2fa7a2b 100644
--- a/resources/profiles/Prusa/filament/Prusament PETG @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PETG @XL.json	
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "3",
 	"filament_cooling_initial_speed": "5",
 	"filament_cooling_final_speed": "2.5",
diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json
index efda9cf4e3..ae302e09eb 100644
--- a/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json	
@@ -33,8 +33,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL.json b/resources/profiles/Prusa/filament/Prusament PLA @XL.json
index 9d02a67491..b5d006dc46 100644
--- a/resources/profiles/Prusa/filament/Prusament PLA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PLA @XL.json	
@@ -33,8 +33,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json
index 366c6043cd..2c689937cf 100644
--- a/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json	
@@ -6,7 +6,9 @@
 	"setting_id": "DIrPylH6rmu6YA43",
 	"filament_id": "OFh7mvPO",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "215",
 	"nozzle_temperature": "215",
 	"hot_plate_temp_initial_layer": "75",
@@ -40,8 +42,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL.json b/resources/profiles/Prusa/filament/Prusament PVB @XL.json
index 4a9a858c06..01df675ba1 100644
--- a/resources/profiles/Prusa/filament/Prusament PVB @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PVB @XL.json	
@@ -6,7 +6,9 @@
 	"setting_id": "RF55nfxQwqUqe00Q",
 	"filament_id": "OFh7mvPO",
 	"instantiation": "true",
-	"filament_vendor": ["Prusa Polymers"],
+	"filament_vendor": [
+		"Prusa Polymers"
+	],
 	"nozzle_temperature_intial_layer": "215",
 	"nozzle_temperature": "215",
 	"hot_plate_temp_initial_layer": "75",
@@ -40,8 +42,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json
index 8bfc482af6..1b847cb1c8 100644
--- a/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json	
+++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json	
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json
index 9ed3d9af74..97c4f6d108 100644
--- a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json	
@@ -36,8 +36,6 @@
 	"filament_loading_speed": "10",
 	"filament_unloading_speed_start": "100",
 	"filament_unloading_speed": "100",
-	"filament_load_time": "10.5",
-	"filament_unload_time": "8.5",
 	"filament_cooling_moves": "2",
 	"filament_cooling_initial_speed": "10",
 	"filament_cooling_final_speed": "3.5",
diff --git a/resources/profiles/Prusa/machine/Prusa CORE One HF.json b/resources/profiles/Prusa/machine/Prusa CORE One HF.json
index 027ef3e2d0..2c75795ff5 100644
--- a/resources/profiles/Prusa/machine/Prusa CORE One HF.json	
+++ b/resources/profiles/Prusa/machine/Prusa CORE One HF.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One HF",
 	"bed_model": "coreone_bed.stl",
 	"bed_texture": "coreone.svg",
-	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One",
+	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One HF 0.6;Generic PLA @Prusa CORE One HF 0.8",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/machine/Prusa CORE One L HF.json b/resources/profiles/Prusa/machine/Prusa CORE One L HF.json
index 57287f0380..08f23ca781 100644
--- a/resources/profiles/Prusa/machine/Prusa CORE One L HF.json	
+++ b/resources/profiles/Prusa/machine/Prusa CORE One L HF.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One L HF",
 	"bed_model": "coreonel_bed.stl",
 	"bed_texture": "coreonel.svg",
-	"default_materials": "Generic PLA @Prusa CORE One",
+	"default_materials": "Generic PLA @Prusa CORE One;Generic PLA @Prusa CORE One HF 0.4;Generic PLA @System",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/machine/Prusa CORE One L.json b/resources/profiles/Prusa/machine/Prusa CORE One L.json
index 87bc587830..290659a2a4 100644
--- a/resources/profiles/Prusa/machine/Prusa CORE One L.json	
+++ b/resources/profiles/Prusa/machine/Prusa CORE One L.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One L",
 	"bed_model": "coreonel_bed.stl",
 	"bed_texture": "coreonel.svg",
-	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One",
+	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @System",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/machine/Prusa CORE One.json b/resources/profiles/Prusa/machine/Prusa CORE One.json
index b9907aca2e..3388083a65 100644
--- a/resources/profiles/Prusa/machine/Prusa CORE One.json	
+++ b/resources/profiles/Prusa/machine/Prusa CORE One.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One",
 	"bed_model": "coreone_bed.stl",
 	"bed_texture": "coreone.svg",
-	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One",
+	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One 0.6;Generic PLA @Prusa CORE One 0.8",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4S HF.json b/resources/profiles/Prusa/machine/Prusa MK4S HF.json
index 088715b835..157766c122 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4S HF.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4S HF.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa MK4S HF",
 	"bed_model": "mk4_bed.stl",
 	"bed_texture": "mk4s.svg",
-	"default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S",
+	"default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S HF0.6;Generic PLA @Prusa MK4S HF0.8",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4S.json b/resources/profiles/Prusa/machine/Prusa MK4S.json
index 2f6bd3e45f..e3f598023b 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4S.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4S.json	
@@ -3,7 +3,7 @@
 	"name": "Prusa MK4S",
 	"bed_model": "mk4_bed.stl",
 	"bed_texture": "mk4s.svg",
-	"default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S",
+	"default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S 0.6;Generic PLA @Prusa MK4S 0.8",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json
index b8e882770a..0d558129af 100644
--- a/resources/profiles/Prusa/process/fdm_process_common.json
+++ b/resources/profiles/Prusa/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -83,7 +82,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json
index f49413601a..25ffa10171 100644
--- a/resources/profiles/Qidi.json
+++ b/resources/profiles/Qidi.json
@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.12",
+	"version": "02.04.00.14",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [
@@ -44,13 +44,13 @@
 			"name": "Qidi X-Plus 4",
 			"sub_path": "machine/Qidi X-Plus 4.json"
 		},
-		{
-			"name": "Qidi X-Smart 3",
-			"sub_path": "machine/Qidi X-Smart 3.json"
-		},
 		{
 			"name": "Qidi X-Plus 5",
 			"sub_path": "machine/Qidi X-Plus 5.json"
+		},
+		{
+			"name": "Qidi X-Smart 3",
+			"sub_path": "machine/Qidi X-Smart 3.json"
 		}
 	],
 	"process_list": [
@@ -78,42 +78,90 @@
 			"name": "0.08mm Extra Fine @X-Max 4 0.2 nozzle",
 			"sub_path": "process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json"
 		},
+		{
+			"name": "0.08mm High Quality @X-Plus 5",
+			"sub_path": "process/0.08mm High Quality @X-Plus 5.json"
+		},
+		{
+			"name": "0.08mm High Quality @X-Plus 5 0.2 nozzle",
+			"sub_path": "process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @X-Max 4 0.2 nozzle",
 			"sub_path": "process/0.10mm Standard @X-Max 4 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @X-Plus 5 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @X-Plus 5 0.2 nozzle.json"
+		},
 		{
 			"name": "0.12mm Balanced Quality @X-Max 4 0.2 nozzle",
 			"sub_path": "process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json"
 		},
+		{
+			"name": "0.12mm Balanced Quality @X-Plus 5 0.2 nozzle",
+			"sub_path": "process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json"
+		},
 		{
 			"name": "0.12mm Fine @X-Max 4",
 			"sub_path": "process/0.12mm Fine @X-Max 4.json"
 		},
+		{
+			"name": "0.12mm High Quality @X-Plus 5",
+			"sub_path": "process/0.12mm High Quality @X-Plus 5.json"
+		},
 		{
 			"name": "0.16mm Balanced Quality @X-Max 4",
 			"sub_path": "process/0.16mm Balanced Quality @X-Max 4.json"
 		},
+		{
+			"name": "0.16mm High Quality @X-Plus 5",
+			"sub_path": "process/0.16mm High Quality @X-Plus 5.json"
+		},
 		{
 			"name": "0.16mm Standard @X-Max 4",
 			"sub_path": "process/0.16mm Standard @X-Max 4.json"
 		},
+		{
+			"name": "0.16mm Standard @X-Plus 5",
+			"sub_path": "process/0.16mm Standard @X-Plus 5.json"
+		},
 		{
 			"name": "0.18mm Balanced Quality @X-Max 4 0.6 nozzle",
 			"sub_path": "process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json"
 		},
+		{
+			"name": "0.18mm Balanced Quality @X-Plus 5 0.6 nozzle",
+			"sub_path": "process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json"
+		},
 		{
 			"name": "0.20mm Balanced Strength @X-Max 4",
 			"sub_path": "process/0.20mm Balanced Strength @X-Max 4.json"
 		},
+		{
+			"name": "0.20mm High Quality @X-Plus 5",
+			"sub_path": "process/0.20mm High Quality @X-Plus 5.json"
+		},
 		{
 			"name": "0.20mm Standard @X-Max 4",
 			"sub_path": "process/0.20mm Standard @X-Max 4.json"
 		},
+		{
+			"name": "0.20mm Standard @X-Plus 5",
+			"sub_path": "process/0.20mm Standard @X-Plus 5.json"
+		},
 		{
 			"name": "0.24mm Balanced Quality @X-Max 4 0.8 nozzle",
 			"sub_path": "process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Balanced Quality @X-Plus 5 0.6 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Balanced Quality @X-Plus 5 0.8 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json"
+		},
 		{
 			"name": "0.24mm Balanced Strength @X-Max 4 0.6 nozzle",
 			"sub_path": "process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json"
@@ -122,10 +170,22 @@
 			"name": "0.24mm Standard @X-Max 4",
 			"sub_path": "process/0.24mm Standard @X-Max 4.json"
 		},
+		{
+			"name": "0.24mm Standard @X-Plus 5",
+			"sub_path": "process/0.24mm Standard @X-Plus 5.json"
+		},
 		{
 			"name": "0.30mm Standard @X-Max 4 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @X-Max 4 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @X-Plus 5 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Balanced Quality @X-Plus 5 0.8 nozzle",
+			"sub_path": "process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json"
+		},
 		{
 			"name": "0.32mm Balanced Strength @X-Max 4 0.8 nozzle",
 			"sub_path": "process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json"
@@ -134,6 +194,10 @@
 			"name": "0.40mm Standard @X-Max 4 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @X-Max 4 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @X-Plus 5 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @X-Plus 5 0.8 nozzle.json"
+		},
 		{
 			"name": "0.12mm Fine @Qidi XCFPro",
 			"sub_path": "process/0.12mm Fine @Qidi XCFPro.json"
@@ -889,70 +953,6 @@
 		{
 			"name": "0.56mm Standard @Qidi XSmart3 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Qidi XSmart3 0.8 nozzle.json"
-		},
-		{
-			"name": "0.08mm High Quality @X-Plus 5",
-			"sub_path": "process/0.08mm High Quality @X-Plus 5.json"
-		},
-		{
-			"name": "0.12mm High Quality @X-Plus 5",
-			"sub_path": "process/0.12mm High Quality @X-Plus 5.json"
-		},
-		{
-			"name": "0.16mm High Quality @X-Plus 5",
-			"sub_path": "process/0.16mm High Quality @X-Plus 5.json"
-		},
-		{
-			"name": "0.16mm Standard @X-Plus 5",
-			"sub_path": "process/0.16mm Standard @X-Plus 5.json"
-		},
-		{
-			"name": "0.20mm High Quality @X-Plus 5",
-			"sub_path": "process/0.20mm High Quality @X-Plus 5.json"
-		},
-		{
-			"name": "0.20mm Standard @X-Plus 5",
-			"sub_path": "process/0.20mm Standard @X-Plus 5.json"
-		},
-		{
-			"name": "0.24mm Standard @X-Plus 5",
-			"sub_path": "process/0.24mm Standard @X-Plus 5.json"
-		},
-		{
-			"name": "0.08mm High Quality @X-Plus 5 0.2 nozzle",
-			"sub_path": "process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "0.10mm Standard @X-Plus 5 0.2 nozzle",
-			"sub_path": "process/0.10mm Standard @X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm Balanced Quality @X-Plus 5 0.2 nozzle",
-			"sub_path": "process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "0.18mm Balanced Quality @X-Plus 5 0.6 nozzle",
-			"sub_path": "process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "0.24mm Balanced Quality @X-Plus 5 0.6 nozzle",
-			"sub_path": "process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @X-Plus 5 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "0.24mm Balanced Quality @X-Plus 5 0.8 nozzle",
-			"sub_path": "process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "0.32mm Balanced Quality @X-Plus 5 0.8 nozzle",
-			"sub_path": "process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @X-Plus 5 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @X-Plus 5 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -968,6 +968,10 @@
 			"name": "fdm_filament_x4_common",
 			"sub_path": "filament/X4/fdm_filament_x4_common.json"
 		},
+		{
+			"name": "fdm_filament_x5_common",
+			"sub_path": "filament/X5/fdm_filament_x5_common.json"
+		},
 		{
 			"name": "QIDI ASA-CF",
 			"sub_path": "filament/QIDI ASA-CF.json"
@@ -1652,6 +1656,230 @@
 			"name": "QIDI WOOD Rapido@X-Max 4-Series",
 			"sub_path": "filament/X4/QIDI WOOD Rapido @X-Max 4.json"
 		},
+		{
+			"name": "Bambu ABS@X-Plus 5-Series",
+			"sub_path": "filament/X5/Bambu ABS @X-Plus 5.json"
+		},
+		{
+			"name": "Bambu PETG@X-Plus 5-Series",
+			"sub_path": "filament/X5/Bambu PETG @X-Plus 5.json"
+		},
+		{
+			"name": "Bambu PLA@X-Plus 5-Series",
+			"sub_path": "filament/X5/Bambu PLA @X-Plus 5.json"
+		},
+		{
+			"name": "Generic ABS@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic ABS @X-Plus 5.json"
+		},
+		{
+			"name": "Generic PC@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic PC @X-Plus 5.json"
+		},
+		{
+			"name": "Generic PETG@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic PETG @X-Plus 5.json"
+		},
+		{
+			"name": "Generic PLA Silk@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic PLA Silk @X-Plus 5.json"
+		},
+		{
+			"name": "Generic PLA+@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic PLA+ @X-Plus 5.json"
+		},
+		{
+			"name": "Generic PLA@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic PLA @X-Plus 5.json"
+		},
+		{
+			"name": "Generic TPU 95A@X-Plus 5-Series",
+			"sub_path": "filament/X5/Generic TPU 95A @X-Plus 5.json"
+		},
+		{
+			"name": "HATCHBOX ABS@X-Plus 5-Series",
+			"sub_path": "filament/X5/HATCHBOX ABS @X-Plus 5.json"
+		},
+		{
+			"name": "HATCHBOX PETG@X-Plus 5-Series",
+			"sub_path": "filament/X5/HATCHBOX PETG @X-Plus 5.json"
+		},
+		{
+			"name": "HATCHBOX PLA@X-Plus 5-Series",
+			"sub_path": "filament/X5/HATCHBOX PLA @X-Plus 5.json"
+		},
+		{
+			"name": "Overture ABS@X-Plus 5-Series",
+			"sub_path": "filament/X5/Overture ABS @X-Plus 5.json"
+		},
+		{
+			"name": "Overture PLA@X-Plus 5-Series",
+			"sub_path": "filament/X5/Overture PLA @X-Plus 5.json"
+		},
+		{
+			"name": "PolyLite ABS@X-Plus 5-Series",
+			"sub_path": "filament/X5/PolyLite ABS @X-Plus 5.json"
+		},
+		{
+			"name": "PolyLite PLA@X-Plus 5-Series",
+			"sub_path": "filament/X5/PolyLite PLA @X-Plus 5.json"
+		},
+		{
+			"name": "Polymaker PLA-HT@X-Plus 5-Series",
+			"sub_path": "filament/X5/Polymaker PLA-HT @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ABS Odorless@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ABS Odorless @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ABS Rapido Metal@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ABS Rapido@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ABS Rapido @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ABS-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ABS-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ASA-Aero@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ASA-Aero @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ASA-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ASA-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI ASA@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI ASA @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PA12-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PA12-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PA6-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PA6-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PAHT-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PAHT-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PAHT-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PAHT-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PC/ABS-FR@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PC-ABS-FR @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PEBA 95A@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PEBA 95A @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PET-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PET-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PET-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PET-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG Basic@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG Basic @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG Rapido@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG Rapido @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG Tough@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG Tough @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG Translucent@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG Translucent @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PETG-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PETG-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Basic@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Basic @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Matte Basic@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Matte Basic @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Matte@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Metal@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Rapido@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Rapido @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA Silk@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA Silk @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PLA-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PLA-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PPS-CF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PPS-CF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI PPS-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI PPS-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI Support For PAHT@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI Support For PAHT @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI Support For PET/PA@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI Support For PET-PA @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI TPU 95A-HF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI TPU 95A-HF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI TPU-Aero@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI TPU-Aero @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI TPU-GF@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI TPU-GF @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI UltraPA-CF25@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI UltraPA@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI UltraPA @X-Plus 5.json"
+		},
+		{
+			"name": "QIDI WOOD Rapido@X-Plus 5-Series",
+			"sub_path": "filament/X5/QIDI WOOD Rapido @X-Plus 5.json"
+		},
 		{
 			"name": "QIDI ASA-CF @Qidi Q1 Pro 0.4 nozzle",
 			"sub_path": "filament/QIDI ASA-CF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -1716,6 +1944,10 @@
 			"name": "Bambu ABS",
 			"sub_path": "filament/Bambu ABS.json"
 		},
+		{
+			"name": "Generic ABS @Qidi",
+			"sub_path": "filament/Generic ABS @Qidi.json"
+		},
 		{
 			"name": "HATCHBOX ABS @Qidi",
 			"sub_path": "filament/HATCHBOX ABS @Qidi.json"
@@ -1752,14 +1984,14 @@
 			"name": "QIDI ABS-GF25",
 			"sub_path": "filament/QIDI ABS-GF25.json"
 		},
-		{
-			"name": "Generic ABS @Qidi",
-			"sub_path": "filament/Generic ABS @Qidi.json"
-		},
 		{
 			"name": "Qidi PC-ABS-FR",
 			"sub_path": "filament/Qidi PC-ABS-FR.json"
 		},
+		{
+			"name": "Generic ASA @Qidi",
+			"sub_path": "filament/Generic ASA @Qidi.json"
+		},
 		{
 			"name": "QIDI ASA",
 			"sub_path": "filament/QIDI ASA.json"
@@ -1769,8 +2001,12 @@
 			"sub_path": "filament/Qidi ASA-Aero.json"
 		},
 		{
-			"name": "Generic ASA @Qidi",
-			"sub_path": "filament/Generic ASA @Qidi.json"
+			"name": "Generic PA @Qidi",
+			"sub_path": "filament/Generic PA @Qidi.json"
+		},
+		{
+			"name": "Generic PA-CF @Qidi",
+			"sub_path": "filament/Generic PA-CF @Qidi.json"
 		},
 		{
 			"name": "QIDI PA-Ultra",
@@ -1816,14 +2052,6 @@
 			"name": "QIDI UltraPA-CF25",
 			"sub_path": "filament/QIDI UltraPA-CF25.json"
 		},
-		{
-			"name": "Generic PA @Qidi",
-			"sub_path": "filament/Generic PA @Qidi.json"
-		},
-		{
-			"name": "Generic PA-CF @Qidi",
-			"sub_path": "filament/Generic PA-CF @Qidi.json"
-		},
 		{
 			"name": "Generic PC @Qidi",
 			"sub_path": "filament/Generic PC @Qidi.json"
@@ -1832,6 +2060,14 @@
 			"name": "Bambu PETG",
 			"sub_path": "filament/Bambu PETG.json"
 		},
+		{
+			"name": "Generic PETG @Qidi",
+			"sub_path": "filament/Generic PETG @Qidi.json"
+		},
+		{
+			"name": "Generic PETG-CF @Qidi",
+			"sub_path": "filament/Generic PETG-CF @Qidi.json"
+		},
 		{
 			"name": "HATCHBOX PETG @Qidi",
 			"sub_path": "filament/HATCHBOX PETG @Qidi.json"
@@ -1860,14 +2096,6 @@
 			"name": "QIDI PETG-GF",
 			"sub_path": "filament/QIDI PETG-GF.json"
 		},
-		{
-			"name": "Generic PETG @Qidi",
-			"sub_path": "filament/Generic PETG @Qidi.json"
-		},
-		{
-			"name": "Generic PETG-CF @Qidi",
-			"sub_path": "filament/Generic PETG-CF @Qidi.json"
-		},
 		{
 			"name": "Tinmorry PETG-ECO",
 			"sub_path": "filament/Tinmorry PETG-ECO.json"
@@ -1876,6 +2104,22 @@
 			"name": "Bambu PLA",
 			"sub_path": "filament/Bambu PLA.json"
 		},
+		{
+			"name": "Generic PLA @Qidi",
+			"sub_path": "filament/Generic PLA @Qidi.json"
+		},
+		{
+			"name": "Generic PLA Silk @Qidi",
+			"sub_path": "filament/Generic PLA Silk @Qidi.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi",
+			"sub_path": "filament/Generic PLA+ @Qidi.json"
+		},
+		{
+			"name": "Generic PLA-CF @Qidi",
+			"sub_path": "filament/Generic PLA-CF @Qidi.json"
+		},
 		{
 			"name": "HATCHBOX PLA @Qidi",
 			"sub_path": "filament/HATCHBOX PLA @Qidi.json"
@@ -1916,22 +2160,6 @@
 			"name": "QIDI WOOD Rapido",
 			"sub_path": "filament/QIDI WOOD Rapido.json"
 		},
-		{
-			"name": "Generic PLA @Qidi",
-			"sub_path": "filament/Generic PLA @Qidi.json"
-		},
-		{
-			"name": "Generic PLA Silk @Qidi",
-			"sub_path": "filament/Generic PLA Silk @Qidi.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi",
-			"sub_path": "filament/Generic PLA+ @Qidi.json"
-		},
-		{
-			"name": "Generic PLA-CF @Qidi",
-			"sub_path": "filament/Generic PLA-CF @Qidi.json"
-		},
 		{
 			"name": "Qidi PLA-CF",
 			"sub_path": "filament/Qidi PLA-CF.json"
@@ -1940,6 +2168,14 @@
 			"name": "Generic PVA @Qidi",
 			"sub_path": "filament/Generic PVA @Qidi.json"
 		},
+		{
+			"name": "Generic TPU 95A @Qidi",
+			"sub_path": "filament/Generic TPU 95A @Qidi.json"
+		},
+		{
+			"name": "Generic TPU @Qidi",
+			"sub_path": "filament/Generic TPU @Qidi.json"
+		},
 		{
 			"name": "QIDI PEBA 95A",
 			"sub_path": "filament/QIDI PEBA 95A.json"
@@ -1952,14 +2188,6 @@
 			"name": "QIDI TPU-GF",
 			"sub_path": "filament/QIDI TPU-GF.json"
 		},
-		{
-			"name": "Generic TPU @Qidi",
-			"sub_path": "filament/Generic TPU @Qidi.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi",
-			"sub_path": "filament/Generic TPU 95A @Qidi.json"
-		},
 		{
 			"name": "Qidi TPU 95A-HF",
 			"sub_path": "filament/Qidi TPU 95A-HF.json"
@@ -4172,6 +4400,770 @@
 			"name": "QIDI WOOD Rapido @Qidi X-Max 4 0.8 nozzle",
 			"sub_path": "filament/X4/QIDI WOOD Rapido @Qidi X-Max 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Bambu ABS @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PC @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PC @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PC @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PC @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Overture ABS @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Overture ABS @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Overture ABS @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Overture ABS @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Overture PLA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Overture PLA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Overture PLA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Overture PLA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "PolyLite ABS @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "PolyLite ABS @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "PolyLite ABS @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "PolyLite ABS @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI ASA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json"
+		},
+		{
+			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json"
+		},
+		{
+			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json"
+		},
 		{
 			"name": "Bambu ABS @0.2 nozzle",
 			"sub_path": "filament/Bambu ABS @0.2 nozzle.json"
@@ -4216,6 +5208,50 @@
 			"name": "Bambu ABS @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/Bambu ABS @Qidi X-Plus 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic ABS @Qidi Q1 Pro 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi Q1 Pro 0.6 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Max 3 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 3 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 4 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 4 0.6 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @Qidi X-Smart 3 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json"
+		},
 		{
 			"name": "HATCHBOX ABS @Qidi 0.2 nozzle",
 			"sub_path": "filament/HATCHBOX ABS @Qidi 0.2 nozzle.json"
@@ -4552,50 +5588,6 @@
 			"name": "QIDI ABS-GF25 @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/QIDI ABS-GF25 @Qidi X-Plus 4 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic ABS @Qidi Q1 Pro 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi Q1 Pro 0.6 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Max 3 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 3 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 4 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 4 0.6 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Smart 3 0.2 nozzle",
-			"sub_path": "filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json"
-		},
 		{
 			"name": "Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle",
 			"sub_path": "filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json"
@@ -4620,6 +5612,50 @@
 			"name": "Qidi PC-ABS-FR @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/Qidi PC-ABS-FR @Qidi X-Plus 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic ASA @Qidi Q1 Pro 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi Q1 Pro 0.6 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Max 3 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Plus 3 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Plus 4 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Plus 4 0.6 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @Qidi X-Smart 3 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json"
+		},
 		{
 			"name": "QIDI ASA @Qidi Q1 Pro 0.2 nozzle",
 			"sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json"
@@ -4672,50 +5708,6 @@
 			"name": "Qidi ASA-Aero @Qidi X-Plus 4 0.4 nozzle",
 			"sub_path": "filament/Qidi ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json"
 		},
-		{
-			"name": "Generic ASA @Qidi Q1 Pro 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi Q1 Pro 0.6 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Max 3 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Plus 3 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Plus 4 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Plus 4 0.6 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic ASA @Qidi X-Smart 3 0.2 nozzle",
-			"sub_path": "filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json"
-		},
 		{
 			"name": "QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle",
 			"sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json"
@@ -5064,6 +6056,50 @@
 			"name": "Bambu PETG @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/Bambu PETG @Qidi X-Plus 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic PETG @Qidi Q1 Pro 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi Q1 Pro 0.6 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Max 3 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 3 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 4 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 4 0.6 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Qidi X-Smart 3 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json"
+		},
 		{
 			"name": "HATCHBOX PETG @0.2 nozzle",
 			"sub_path": "filament/HATCHBOX PETG @Qidi 0.2 nozzle.json"
@@ -5332,50 +6368,6 @@
 			"name": "QIDI PETG-GF @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/QIDI PETG-GF @Qidi X-Plus 4 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic PETG @Qidi Q1 Pro 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi Q1 Pro 0.6 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Max 3 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 3 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 4 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 4 0.6 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Smart 3 0.2 nozzle",
-			"sub_path": "filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json"
-		},
 		{
 			"name": "Bambu PLA @0.2 nozzle",
 			"sub_path": "filament/Bambu PLA @0.2 nozzle.json"
@@ -5420,6 +6412,150 @@
 			"name": "Bambu PLA @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/Bambu PLA @Qidi X-Plus 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic PLA @Qidi Q1 Pro 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi Q1 Pro 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Max 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Max 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Max 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 4 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 4 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Smart 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Smart 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Qidi X-Smart 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi Q1 Pro 0.2 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi Q1 Pro 0.6 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Max 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Max 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Max 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 4 0.2 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 4 0.6 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Smart 3 0.2 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Smart 3 0.6 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA+ @Qidi X-Smart 3 0.8 nozzle",
+			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json"
+		},
 		{
 			"name": "HATCHBOX PLA @0.2 nozzle",
 			"sub_path": "filament/HATCHBOX PLA @Qidi 0.2 nozzle.json"
@@ -5824,150 +6960,6 @@
 			"name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic PLA @Qidi Q1 Pro 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi Q1 Pro 0.6 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Max 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Max 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Max 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 4 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 4 0.6 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Smart 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Smart 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Smart 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi Q1 Pro 0.2 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi Q1 Pro 0.6 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Max 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Max 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Max 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 4 0.2 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 4 0.6 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Smart 3 0.2 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Smart 3 0.6 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Smart 3 0.8 nozzle",
-			"sub_path": "filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json"
-		},
 		{
 			"name": "QIDI PLA-CF @0.6 nozzle",
 			"sub_path": "filament/QIDI PLA-CF @0.6 nozzle.json"
@@ -6000,6 +6992,22 @@
 			"name": "QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle",
+			"sub_path": "filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle",
+			"sub_path": "filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @Qidi Q1 Pro 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @Qidi X-Plus 4 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json"
+		},
 		{
 			"name": "QIDI PEBA 95A @Qidi Q1 Pro 0.4 nozzle",
 			"sub_path": "filament/QIDI PEBA 95A @Qidi Q1 Pro 0.4 nozzle.json"
@@ -6056,22 +7064,6 @@
 			"name": "QIDI TPU-GF @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/QIDI TPU-GF @Qidi X-Plus 4 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic TPU @Qidi Q1 Pro 0.4 nozzle",
-			"sub_path": "filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic TPU @Qidi X-Plus 4 0.4 nozzle",
-			"sub_path": "filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle",
-			"sub_path": "filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle",
-			"sub_path": "filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json"
-		},
 		{
 			"name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle",
 			"sub_path": "filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -6103,998 +7095,6 @@
 		{
 			"name": "Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle",
 			"sub_path": "filament/Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle.json"
-		},
-		{
-			"name": "fdm_filament_x5_common",
-			"sub_path": "filament/X5/fdm_filament_x5_common.json"
-		},
-		{
-			"name": "Generic ABS@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic ABS @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ASA@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ASA @X-Plus 5.json"
-		},
-		{
-			"name": "Generic PETG@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic PETG @X-Plus 5.json"
-		},
-		{
-			"name": "Generic PLA Silk@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic PLA Silk @X-Plus 5.json"
-		},
-		{
-			"name": "Generic PLA@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic PLA @X-Plus 5.json"
-		},
-		{
-			"name": "Generic PLA+@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic PLA+ @X-Plus 5.json"
-		},
-		{
-			"name": "PolyLite PLA@X-Plus 5-Series",
-			"sub_path": "filament/X5/PolyLite PLA @X-Plus 5.json"
-		},
-		{
-			"name": "Polymaker PLA-HT@X-Plus 5-Series",
-			"sub_path": "filament/X5/Polymaker PLA-HT @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ABS Rapido @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido Metal@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Odorless@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ABS Odorless @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Rapido @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Matte@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Silk@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Silk @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Metal@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Tough@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG Tough @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PET-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PA12-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PA12-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PA6-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PA6-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PAHT-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PPS-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ABS-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI UltraPA @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic TPU 95A @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PC/ABS-FR@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PC-ABS-FR @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA-Aero@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ASA-Aero @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic ABS @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PLA+ @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU 95A-HF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI TPU 95A-HF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "PolyLite ABS@X-Plus 5-Series",
-			"sub_path": "filament/X5/PolyLite ABS @X-Plus 5.json"
-		},
-		{
-			"name": "PolyLite ABS @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "PolyLite ABS @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "PolyLite ABS @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "PolyLite ABS @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Overture PLA@X-Plus 5-Series",
-			"sub_path": "filament/X5/Overture PLA @X-Plus 5.json"
-		},
-		{
-			"name": "Overture PLA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Overture PLA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Overture PLA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Overture PLA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Overture ABS@X-Plus 5-Series",
-			"sub_path": "filament/X5/Overture ABS @X-Plus 5.json"
-		},
-		{
-			"name": "Overture ABS @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Overture ABS @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Overture ABS @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Overture ABS @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA@X-Plus 5-Series",
-			"sub_path": "filament/X5/Bambu PLA @X-Plus 5.json"
-		},
-		{
-			"name": "Bambu PLA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PLA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS@X-Plus 5-Series",
-			"sub_path": "filament/X5/Bambu ABS @X-Plus 5.json"
-		},
-		{
-			"name": "Bambu ABS @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu ABS @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG@X-Plus 5-Series",
-			"sub_path": "filament/X5/Bambu PETG @X-Plus 5.json"
-		},
-		{
-			"name": "Bambu PETG @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Bambu PETG @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PLA@X-Plus 5-Series",
-			"sub_path": "filament/X5/HATCHBOX PLA @X-Plus 5.json"
-		},
-		{
-			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX ABS@X-Plus 5-Series",
-			"sub_path": "filament/X5/HATCHBOX ABS @X-Plus 5.json"
-		},
-		{
-			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PETG@X-Plus 5-Series",
-			"sub_path": "filament/X5/HATCHBOX PETG @X-Plus 5.json"
-		},
-		{
-			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PAHT-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PET-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA-CF25@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI WOOD Rapido@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI WOOD Rapido @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Generic PC@X-Plus 5-Series",
-			"sub_path": "filament/X5/Generic PC @X-Plus 5.json"
-		},
-		{
-			"name": "Generic PC @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "Generic PC @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Generic PC @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Generic PC @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU-Aero@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI TPU-Aero @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PET/PA@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI Support For PET-PA @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PAHT@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI Support For PAHT @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Basic@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Basic @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Matte Basic@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PLA Matte Basic @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Rapido@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG Rapido @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Basic@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG Basic @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Translucent@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG Translucent @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PETG-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PPS-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI PEBA 95A@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI PEBA 95A @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA-CF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI ASA-CF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU-GF@X-Plus 5-Series",
-			"sub_path": "filament/X5/QIDI TPU-GF @X-Plus 5.json"
-		},
-		{
-			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -7214,6 +7214,10 @@
 			"name": "Qidi X-Max 4 0.4 nozzle",
 			"sub_path": "machine/Qidi X-Max 4 0.4 nozzle.json"
 		},
+		{
+			"name": "Qidi X-Plus 5 0.4 nozzle",
+			"sub_path": "machine/Qidi X-Plus 5 0.4 nozzle.json"
+		},
 		{
 			"name": "Qidi Q2 0.4 nozzle",
 			"sub_path": "machine/Qidi Q2 0.4 nozzle.json"
@@ -7234,6 +7238,18 @@
 			"name": "Qidi X-Max 4 0.8 nozzle",
 			"sub_path": "machine/Qidi X-Max 4 0.8 nozzle.json"
 		},
+		{
+			"name": "Qidi X-Plus 5 0.2 nozzle",
+			"sub_path": "machine/Qidi X-Plus 5 0.2 nozzle.json"
+		},
+		{
+			"name": "Qidi X-Plus 5 0.6 nozzle",
+			"sub_path": "machine/Qidi X-Plus 5 0.6 nozzle.json"
+		},
+		{
+			"name": "Qidi X-Plus 5 0.8 nozzle",
+			"sub_path": "machine/Qidi X-Plus 5 0.8 nozzle.json"
+		},
 		{
 			"name": "Qidi Q2 0.2 nozzle",
 			"sub_path": "machine/Qidi Q2 0.2 nozzle.json"
@@ -7257,22 +7273,6 @@
 		{
 			"name": "Qidi Q2C 0.8 nozzle",
 			"sub_path": "machine/Qidi Q2C 0.8 nozzle.json"
-		},
-		{
-			"name": "Qidi X-Plus 5 0.4 nozzle",
-			"sub_path": "machine/Qidi X-Plus 5 0.4 nozzle.json"
-		},
-		{
-			"name": "Qidi X-Plus 5 0.6 nozzle",
-			"sub_path": "machine/Qidi X-Plus 5 0.6 nozzle.json"
-		},
-		{
-			"name": "Qidi X-Plus 5 0.8 nozzle",
-			"sub_path": "machine/Qidi X-Plus 5 0.8 nozzle.json"
-		},
-		{
-			"name": "Qidi X-Plus 5 0.2 nozzle",
-			"sub_path": "machine/Qidi X-Plus 5 0.2 nozzle.json"
 		}
 	]
 }
diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json
index accf79987f..79a52578a4 100644
--- a/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json	
@@ -8,6 +8,9 @@
 	"box_temperature_range_high": [
 		"45"
 	],
+	"chamber_temperature": [
+		"55"
+	],
 	"close_fan_the_first_x_layers": [
 		"3"
 	],
diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json
index 6abc420237..d4af23e160 100644
--- a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json	
@@ -14,9 +14,15 @@
 	"box_temperature": [
 		"55"
 	],
+	"chamber_temperature": [
+		"55"
+	],
 	"close_fan_the_first_x_layers": [
 		"3"
 	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json
index ca5591813d..fec939caa8 100644
--- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json	
@@ -14,9 +14,15 @@
 	"box_temperature": [
 		"60"
 	],
+	"chamber_temperature": [
+		"55"
+	],
 	"close_fan_the_first_x_layers": [
 		"3"
 	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json
index 411ae26214..de72deb697 100644
--- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json	
@@ -14,9 +14,15 @@
 	"box_temperature": [
 		"60"
 	],
+	"chamber_temperature": [
+		"55"
+	],
 	"close_fan_the_first_x_layers": [
 		"3"
 	],
+	"during_print_exhaust_fan_speed": [
+		"0"
+	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json
index 615d895851..f973121e62 100644
--- a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json	
@@ -14,8 +14,8 @@
 	"box_temperature": [
 		"65"
 	],
-	"chamber_temperatures": [
-		"0"
+	"chamber_temperature": [
+		"55"
 	],
 	"close_fan_the_first_x_layers": [
 		"3"
diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json
index 2ea27efa4b..82c261fbd5 100644
--- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json	
+++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json	
@@ -14,6 +14,9 @@
 	"box_temperature": [
 		"60"
 	],
+	"chamber_temperature": [
+		"55"
+	],
 	"close_fan_the_first_x_layers": [
 		"3"
 	],
diff --git a/resources/profiles/Qidi/machine/Qidi Q2.json b/resources/profiles/Qidi/machine/Qidi Q2.json
index d7f9e8bf62..6b05ae57b0 100644
--- a/resources/profiles/Qidi/machine/Qidi Q2.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q2.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_q2_buildplate_model.stl",
 	"bed_texture": "qidi_q2_buildplate_texture.svg",
 	"hotend_model": "X-Series_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF;QIDI PLA Rapido @Qidi Q2 0.2 nozzle;QIDI PLA Rapido @Qidi Q2 0.4 nozzle;QIDI PLA Rapido @Qidi Q2 0.6 nozzle;QIDI PLA Rapido @Qidi Q2 0.8 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi Q2C.json b/resources/profiles/Qidi/machine/Qidi Q2C.json
index cdc45e8f5e..462814d225 100644
--- a/resources/profiles/Qidi/machine/Qidi Q2C.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q2C.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_q2c_buildplate_model.stl",
 	"bed_texture": "qidi_q2c_buildplate_texture.svg",
 	"hotend_model": "X-Series_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF;QIDI PLA Rapido @Qidi Q2C 0.2 nozzle;QIDI PLA Rapido @Qidi Q2C 0.4 nozzle;QIDI PLA Rapido @Qidi Q2C 0.6 nozzle;QIDI PLA Rapido @Qidi Q2C 0.8 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3.json b/resources/profiles/Qidi/machine/Qidi X-Max 3.json
index 99888a8acf..ce2cfe8c26 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_xmax3_buildplate_model.stl",
 	"bed_texture": "qidi_xmax3_buildplate_texture.svg",
 	"hotend_model": "qidi_xseries_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Max 3 0.2 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 4.json b/resources/profiles/Qidi/machine/Qidi X-Max 4.json
index 4d67f77537..5e1b05cc11 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 4.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 4.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_xmax4_buildplate_model.stl",
 	"bed_texture": "qidi_xmax4_buildplate_texture.svg",
 	"hotend_model": "qidi_xseries_gen3_hotend.stl",
-	"default_materials": "Generic ABS @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.4 nozzle;QIDI ABS Odorless @Qidi X-Max 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Max 4 0.4 nozzle;QIDI PLA-CF @Qidi X-Max 4 0.4 nozzle;Generic PLA Silk @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Silk @Qidi X-Max 4 0.4 nozzle;QIDI ASA @Qidi X-Max 4 0.4 nozzle;QIDI PETG Basic @Qidi X-Max 4 0.4 nozzle;QIDI PETG Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Max 4 0.4 nozzle;QIDI PETG Translucent @Qidi X-Max 4 0.4 nozzle;QIDI PLA Basic @Qidi X-Max 4 0.4 nozzle;QIDI PLA Matte Basic @Qidi X-Max 4 0.4 nozzle;Generic PETG @Qidi X-Max 4 0.4 nozzle"
+	"default_materials": "Generic ABS @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.4 nozzle;QIDI ABS Odorless @Qidi X-Max 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Max 4 0.4 nozzle;QIDI PLA-CF @Qidi X-Max 4 0.4 nozzle;Generic PLA Silk @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Silk @Qidi X-Max 4 0.4 nozzle;QIDI ASA @Qidi X-Max 4 0.4 nozzle;QIDI PETG Basic @Qidi X-Max 4 0.4 nozzle;QIDI PETG Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Max 4 0.4 nozzle;QIDI PETG Translucent @Qidi X-Max 4 0.4 nozzle;QIDI PLA Basic @Qidi X-Max 4 0.4 nozzle;QIDI PLA Matte Basic @Qidi X-Max 4 0.4 nozzle;Generic PETG @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.2 nozzle;Generic PLA @Qidi X-Max 4 0.6 nozzle;Generic PLA @Qidi X-Max 4 0.8 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json
index 84df7f37be..e527fe85b4 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_xplus3_buildplate_model.stl",
 	"bed_texture": "qidi_xplus3_buildplate_texture.svg",
 	"hotend_model": "qidi_xseries_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Plus 3 0.2 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json
index ac34a73e34..69a757212e 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 4.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_xplus4_buildplate_model.stl",
 	"bed_texture": "qidi_xplus4_buildplate_texture.svg",
 	"hotend_model": "qidi_xseries_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;Generic PETG @Qidi"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;Generic PETG @Qidi;QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json
index 75b3d2e252..7cacb82e87 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json	
@@ -8,5 +8,5 @@
 	"bed_model": "qidi_xsmart3_buildplate_model.stl",
 	"bed_texture": "qidi_xsmart3_buildplate_texture.svg",
 	"hotend_model": "qidi_xseries_gen3_hotend.stl",
-	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi"
+	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Smart 3 0.2 nozzle"
 }
diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json
index 2d5fc3ead3..50bcc2255c 100644
--- a/resources/profiles/Qidi/machine/fdm_machine_common.json
+++ b/resources/profiles/Qidi/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Qidi/machine/fdm_machine_x_common.json b/resources/profiles/Qidi/machine/fdm_machine_x_common.json
index b8a14c80ec..b2b0359a39 100644
--- a/resources/profiles/Qidi/machine/fdm_machine_x_common.json
+++ b/resources/profiles/Qidi/machine/fdm_machine_x_common.json
@@ -133,7 +133,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"wipe_tower_type": "type1",
 	"support_air_filtration": [
diff --git a/resources/profiles/Qidi/machine/fdm_q_common.json b/resources/profiles/Qidi/machine/fdm_q_common.json
index 94fbffd64d..a8915e8895 100644
--- a/resources/profiles/Qidi/machine/fdm_q_common.json
+++ b/resources/profiles/Qidi/machine/fdm_q_common.json
@@ -126,7 +126,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"wipe_tower_type": "type1",
 	"support_air_filtration": [
diff --git a/resources/profiles/Qidi/machine/fdm_qidi_common.json b/resources/profiles/Qidi/machine/fdm_qidi_common.json
index 38b39c4591..69ca7c731f 100644
--- a/resources/profiles/Qidi/machine/fdm_qidi_common.json
+++ b/resources/profiles/Qidi/machine/fdm_qidi_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"wipe_tower_type": "type1",
 	"change_filament_gcode": "",
diff --git a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json
index 93be914bd5..ce87f787ca 100644
--- a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json	
@@ -46,7 +46,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.22",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json
index 499d8ad5cb..741e7b059d 100644
--- a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json	
@@ -51,7 +51,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"450"
 	],
diff --git a/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json
index 2f49cb3ba1..b80777804a 100644
--- a/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json	
@@ -37,7 +37,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.22",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json
index 70d97f84ab..ab474d3b97 100644
--- a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json	
@@ -40,7 +40,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.22",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json
index 7bafb22f06..170ab2c68d 100644
--- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json	
+++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_qidi_x3_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
index 993afe4898..1bb3d04914 100644
--- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json	
+++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "iQXhsvqnRSjNDxK1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
index 897fdb4504..5dfa794d9f 100644
--- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json	
+++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Ls6f3OYdkl6qG2i2",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
index ab371384d3..3ec7004f02 100644
--- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json	
+++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "4Gy3FqymogmRSeVq",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json b/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json
index 932a708742..900f78219e 100644
--- a/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json	
@@ -50,7 +50,6 @@
 	"small_perimeter_threshold": [
 		"50"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"430"
 	],
diff --git a/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json b/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json
index d734a14634..9273f4b6b9 100644
--- a/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json	
@@ -41,7 +41,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": [
 		"200"
diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json
index 4b5aa16e59..242cce03cd 100644
--- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json	
+++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_qidi_x3_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
index 3f0504ddb3..e5154cf932 100644
--- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json	
+++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "HLcracgY90tIkYwN",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
index 7e058d924d..0546913457 100644
--- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json	
+++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "6Be5iq2K9VppN5gE",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
index 7cb52d8cbc..fa3e8bf18a 100644
--- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json	
+++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "R1lqL3bMvvg6NMgD",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json
index 91d939fec5..4d2d0ff172 100644
--- a/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json	
@@ -44,7 +44,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"330"
 	],
diff --git a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json
index 8d281627ea..9fb86119f4 100644
--- a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json	
@@ -56,7 +56,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.62",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json b/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json
index 5c879d83ab..ab94482de0 100644
--- a/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json	
@@ -39,7 +39,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"270"
 	],
diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
index 2866bac399..490386d1a6 100644
--- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json	
+++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "WqYCTn83Ln11dpYC",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
index 74cc5c814f..edca0c62d1 100644
--- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json	
+++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "2lJE6tuEIL22NBc2",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
index 4dd2935975..4e5922dd23 100644
--- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json	
+++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "MDu610revkMyZze1",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json
index 4bbea2ec6d..74d0ebc2d0 100644
--- a/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json	
@@ -32,7 +32,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"270"
 	],
diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json
index 53429a10d1..f6a25ed90b 100644
--- a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json	
@@ -56,7 +56,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.82",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json
index 646cf814e4..8579e2af21 100644
--- a/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json	
@@ -53,7 +53,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.62",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json
index 787113e6c6..467be12aec 100644
--- a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json	
+++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_qidi_x3_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json
index 3aeb4203e4..ff6aba1a7a 100644
--- a/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json	
+++ b/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json	
@@ -39,7 +39,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_speed": [
 		"230"
 	],
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json
index c6e0b75c76..7a0387f859 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "o9SQqZdG3BoviCAx",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json
index 1aa6974b57..e59977ac1c 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QyCGFIxjMVprexDS",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json
index 7a5d9d09aa..af40d35529 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "e0Mbd6kjHG3Tc7Zm",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
index f29ef5d037..e8640beb97 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QfqK00Ymn3ss9qtU",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
index 1eca5fc51b..c97620af69 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "YomLQtTbuHeQfrip",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
index 529864b872..16d7d96f97 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "M8F4v1shW7h3QyzC",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
index a9026d4c86..93b6d30ab5 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "g73f1lIj9eH0MZjW",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
index 7767956bb8..c5adf500e1 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "tAV9akzom1NHWPNJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json
index 75bf45cef6..b09aa82c4e 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QvbM5h9XXrvsmdX6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
index 4990f0d9f0..0bc4fd8252 100644
--- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json	
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "lag9UwMZ0uLbg6P2",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json
index 555f8f19d0..3d88261b84 100644
--- a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json	
+++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json	
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_qidi_x3_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json
index aa4f96eb58..a9245997d2 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "D5MjSxw3jZYf2Nja",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json
index d9ea812425..fa5d74ece1 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "xV59wYWbrstGW5c5",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json
index cc97b6c1b8..1565426d32 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "96u0HvMr7kqleKBl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
index d5237c4d37..0279d555da 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "gR2HeEDYyNSjL2K7",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
index a0dba6c233..f4f34baaa8 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "UA6RvPAtMfb2ryBL",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.30",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
index d4abe3eeb6..10a1ed451b 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "QECWa3aznaYRN11W",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
index 72754c9145..d115d557cf 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "jjrl5R7LpUXnxA8d",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
index 732f5aa155..16e6bc8ee2 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "TPJTTWCWFbrVv0bx",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json
index 9825272cce..dd498c072d 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "PypLIvy1do9mp98q",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"enable_arc_fitting": "0",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
index 4e5d2e235c..462a355cf9 100644
--- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json	
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "gzZakw9J3bzbD5D8",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.3",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json
index 7622dd4325..a57a8f3f24 100644
--- a/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json	
@@ -53,7 +53,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.62",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json
index 052f88bb4a..4e1a4b322f 100644
--- a/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json	
@@ -56,7 +56,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.82",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json
index 4aa16d0e45..1589706881 100644
--- a/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json	
@@ -56,7 +56,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "4",
 	"sparse_infill_line_width": "0.82",
 	"sparse_infill_speed": [
 		"100"
diff --git a/resources/profiles/Qidi/process/fdm_process_common.json b/resources/profiles/Qidi/process/fdm_process_common.json
index 134d389c22..2216d70bd0 100644
--- a/resources/profiles/Qidi/process/fdm_process_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Qidi/process/fdm_process_n_common.json b/resources/profiles/Qidi/process/fdm_process_n_common.json
index 629d64338d..599becff50 100644
--- a/resources/profiles/Qidi/process/fdm_process_n_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_n_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"apply_top_surface_compensation": "0",
 	"avoid_crossing_wall_includes_support": "0",
 	"bottom_color_penetration_layers": "3",
@@ -70,7 +69,6 @@
 		"150"
 	],
 	"interface_shells": "0",
-	"internal_bridge_support_thickness": "0.8",
 	"internal_solid_infill_line_width": "0.42",
 	"internal_solid_infill_speed": [
 		"150"
@@ -105,9 +103,6 @@
 	"overhang_4_4_speed": [
 		"10"
 	],
-	"overhang_totally_speed": [
-		"10"
-	],
 	"override_filament_scarf_seam_setting": "0",
 	"prime_tower_width": "35",
 	"print_sequence": "by layer",
@@ -149,7 +144,6 @@
 	"small_perimeter_threshold": [
 		"4"
 	],
-	"smooth_coefficient": "90",
 	"smooth_speed_discontinuity_area": "1",
 	"sparse_infill_density": "15%",
 	"sparse_infill_line_width": "0.45",
diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_common.json
index 3a7676e3fe..bf4d53c8ca 100644
--- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
index 176add07f7..2f044b9790 100644
--- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -46,7 +45,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
diff --git a/resources/profiles/RH3D.json b/resources/profiles/RH3D.json
index 4cb9ab573e..dbf9500ca0 100644
--- a/resources/profiles/RH3D.json
+++ b/resources/profiles/RH3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "RH3D",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "RH3D - printer profiles",
 	"machine_model_list": [
diff --git a/resources/profiles/RH3D/process/fdm_process_common.json b/resources/profiles/RH3D/process/fdm_process_common.json
index 2cf6e41151..4f02e37fa6 100644
--- a/resources/profiles/RH3D/process/fdm_process_common.json
+++ b/resources/profiles/RH3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonicline",
@@ -86,7 +85,6 @@
 	"support_object_xy_distance": "0.4",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Raise3D.json b/resources/profiles/Raise3D.json
index b224025f6d..5f98b967d4 100644
--- a/resources/profiles/Raise3D.json
+++ b/resources/profiles/Raise3D.json
@@ -1,7 +1,7 @@
 {
 	"name": "Raise3D",
 	"url": "",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Raise3D configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Raise3D/machine/fdm_machine_common.json b/resources/profiles/Raise3D/machine/fdm_machine_common.json
index b4aada4829..a2c7c89e17 100644
--- a/resources/profiles/Raise3D/machine/fdm_machine_common.json
+++ b/resources/profiles/Raise3D/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json
index 30d3f1cc61..8a6759c78a 100644
--- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json	
+++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "mlb2242fJxu26dnV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.1",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json
index 35e21d67e7..a288122e2e 100644
--- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json	
+++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "u9vhB9uigwzA2mli",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.1",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json
index bdcccf16fb..a027a6d90c 100644
--- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json	
+++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ADqZgpU4D612lSnf",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json
index 7f88195b88..981c91f39a 100644
--- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json	
+++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "GhwsrGu8tZexCrOy",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json
index 91e24b6ebf..4fd5df2d25 100644
--- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json	
+++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "p0KdJttce5WMx30N",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json
index d2d299ca64..ff1b0f158c 100644
--- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json	
+++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "tgWE9Ph7i1F7OweA",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Raise3D/process/fdm_process_common.json b/resources/profiles/Raise3D/process/fdm_process_common.json
index 164ff9d58a..d3568a9bec 100644
--- a/resources/profiles/Raise3D/process/fdm_process_common.json
+++ b/resources/profiles/Raise3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "10",
diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json
index dbe4c3cc56..743333f9aa 100644
--- a/resources/profiles/Ratrig.json
+++ b/resources/profiles/Ratrig.json
@@ -1,6 +1,6 @@
 {
 	"name": "RatRig",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "RatRig configurations",
 	"machine_model_list": [
@@ -276,26 +276,22 @@
 		}
 	],
 	"filament_list": [
-		{
-			"name": "Generic ABS BigNozzle @RatRig",
-			"sub_path": "filament/Generic ABS BigNozzle @RatRig.json"
-		},
 		{
 			"name": "Generic ABS @RatRig",
 			"sub_path": "filament/Generic ABS @RatRig.json"
 		},
 		{
-			"name": "RatRig PunkFil ABS",
-			"sub_path": "filament/RatRig PunkFil ABS.json"
-		},
-		{
-			"name": "Generic ASA BigNozzle @RatRig",
-			"sub_path": "filament/Generic ASA BigNozzle @RatRig.json"
+			"name": "Generic ABS BigNozzle @RatRig",
+			"sub_path": "filament/Generic ABS BigNozzle @RatRig.json"
 		},
 		{
 			"name": "Generic ASA @RatRig",
 			"sub_path": "filament/Generic ASA @RatRig.json"
 		},
+		{
+			"name": "Generic ASA BigNozzle @RatRig",
+			"sub_path": "filament/Generic ASA BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PA @RatRig",
 			"sub_path": "filament/Generic PA @RatRig.json"
@@ -308,38 +304,30 @@
 			"name": "Generic PC @RatRig",
 			"sub_path": "filament/Generic PC @RatRig.json"
 		},
-		{
-			"name": "Generic PCTG BigNozzle @RatRig",
-			"sub_path": "filament/Generic PCTG BigNozzle @RatRig.json"
-		},
-		{
-			"name": "Generic PETG BigNozzle @RatRig",
-			"sub_path": "filament/Generic PETG BigNozzle @RatRig.json"
-		},
 		{
 			"name": "Generic PCTG @RatRig",
 			"sub_path": "filament/Generic PCTG @RatRig.json"
 		},
+		{
+			"name": "Generic PCTG BigNozzle @RatRig",
+			"sub_path": "filament/Generic PCTG BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PETG @RatRig",
 			"sub_path": "filament/Generic PETG @RatRig.json"
 		},
 		{
-			"name": "RatRig PunkFil PETG",
-			"sub_path": "filament/RatRig PunkFil PETG.json"
-		},
-		{
-			"name": "RatRig PunkFil PETG CF",
-			"sub_path": "filament/RatRig PunkFil PETG CF.json"
-		},
-		{
-			"name": "Generic PLA BigNozzle @RatRig",
-			"sub_path": "filament/Generic PLA BigNozzle @RatRig.json"
+			"name": "Generic PETG BigNozzle @RatRig",
+			"sub_path": "filament/Generic PETG BigNozzle @RatRig.json"
 		},
 		{
 			"name": "Generic PLA @RatRig",
 			"sub_path": "filament/Generic PLA @RatRig.json"
 		},
+		{
+			"name": "Generic PLA BigNozzle @RatRig",
+			"sub_path": "filament/Generic PLA BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PLA-CF @RatRig",
 			"sub_path": "filament/Generic PLA-CF @RatRig.json"
@@ -348,13 +336,25 @@
 			"name": "Generic PVA @RatRig",
 			"sub_path": "filament/Generic PVA @RatRig.json"
 		},
+		{
+			"name": "Generic TPU @RatRig",
+			"sub_path": "filament/Generic TPU @RatRig.json"
+		},
 		{
 			"name": "Generic TPU BigNozzle @RatRig",
 			"sub_path": "filament/Generic TPU BigNozzle @RatRig.json"
 		},
 		{
-			"name": "Generic TPU @RatRig",
-			"sub_path": "filament/Generic TPU @RatRig.json"
+			"name": "RatRig PunkFil ABS",
+			"sub_path": "filament/RatRig PunkFil ABS.json"
+		},
+		{
+			"name": "RatRig PunkFil PETG",
+			"sub_path": "filament/RatRig PunkFil PETG.json"
+		},
+		{
+			"name": "RatRig PunkFil PETG CF",
+			"sub_path": "filament/RatRig PunkFil PETG CF.json"
 		}
 	],
 	"machine_list": [
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json
index 3b43d60a23..decababc1c 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-300.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json
index 71eb9724f9..c6cea0faf6 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-400.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json
index 47cd8fba2f..e7b6ab132a 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-500.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json
index 4731e90901..bbe022e658 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-300.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json
index 86963d7e73..8269490619 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-400.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json
index 7b61ebe531..87aa3dd70d 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-500.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json
index f2831e5919..9868dae17f 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-300-clone-mode.stl",
 	"bed_texture": "ratrig_logo_copy_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json
index a14770104f..26a3f7fb1f 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-300-clone-mode.stl",
 	"bed_texture": "ratrig_logo_mirror_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json
index 1a477fb750..ce26c28226 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-300.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json
index 327c56d036..ad2080aa77 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-400-clone-mode.stl",
 	"bed_texture": "ratrig_logo_copy_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json
index 2e72109e25..09e28665d4 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-400-clone-mode.stl",
 	"bed_texture": "ratrig_logo_mirror_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json
index e6c7405f9a..f37a7eabca 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-400.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json
index bc27a53e94..2169db2cbd 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-500-clone-mode.stl",
 	"bed_texture": "ratrig_logo_copy_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json
index 3518748830..c8996519f6 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-500-clone-mode.stl",
 	"bed_texture": "ratrig_logo_mirror_mode.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json
index 59ff011a82..3950a331e8 100644
--- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json	
+++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json	
@@ -8,5 +8,5 @@
 	"bed_model": "ratrig-vcore-bed-500.stl",
 	"bed_texture": "ratrig_logo.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig"
+	"default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System"
 }
diff --git a/resources/profiles/Ratrig/machine/fdm_klipper_common.json b/resources/profiles/Ratrig/machine/fdm_klipper_common.json
index 28ad9ce02c..ecd93a2346 100644
--- a/resources/profiles/Ratrig/machine/fdm_klipper_common.json
+++ b/resources/profiles/Ratrig/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"manual_filament_change": "1",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Ratrig/machine/fdm_machine_common.json b/resources/profiles/Ratrig/machine/fdm_machine_common.json
index ad1efd697f..36f0b6ec55 100644
--- a/resources/profiles/Ratrig/machine/fdm_machine_common.json
+++ b/resources/profiles/Ratrig/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Ratrig/process/fdm_process_common.json b/resources/profiles/Ratrig/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Ratrig/process/fdm_process_common.json
+++ b/resources/profiles/Ratrig/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json
index 65ccb82fa2..486cc31dd5 100644
--- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json
+++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json
index d17f7836a1..cd96b51721 100644
--- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json
+++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json
index 120b8835a5..72aa3cf9bc 100644
--- a/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json
+++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/RolohaunDesign.json b/resources/profiles/RolohaunDesign.json
index 398937c127..e0b7a33301 100644
--- a/resources/profiles/RolohaunDesign.json
+++ b/resources/profiles/RolohaunDesign.json
@@ -1,6 +1,6 @@
 {
 	"name": "RolohaunDesign",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "RolohaunDesign Printer Profiles",
 	"machine_model_list": [
diff --git a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json
index 8438cea7a1..a3c418d16b 100644
--- a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json	
+++ b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json	
@@ -117,7 +117,6 @@
 		"40"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json b/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json
index 11833be972..a07212bae7 100644
--- a/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json
+++ b/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/RolohaunDesign/process/fdm_process_common.json b/resources/profiles/RolohaunDesign/process/fdm_process_common.json
index feb86df0e1..f37dc52e73 100644
--- a/resources/profiles/RolohaunDesign/process/fdm_process_common.json
+++ b/resources/profiles/RolohaunDesign/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -84,7 +83,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/SecKit.json b/resources/profiles/SecKit.json
index 42ac381eb6..91804bff0a 100644
--- a/resources/profiles/SecKit.json
+++ b/resources/profiles/SecKit.json
@@ -1,6 +1,6 @@
 {
 	"name": "SecKit",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "SecKit configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/SecKit/machine/fdm_klipper_common.json b/resources/profiles/SecKit/machine/fdm_klipper_common.json
index 4bb08f7367..ed2826f9b4 100644
--- a/resources/profiles/SecKit/machine/fdm_klipper_common.json
+++ b/resources/profiles/SecKit/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"120"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M601",
diff --git a/resources/profiles/SecKit/machine/fdm_machine_common.json b/resources/profiles/SecKit/machine/fdm_machine_common.json
index 010f5b7f8d..555c649235 100644
--- a/resources/profiles/SecKit/machine/fdm_machine_common.json
+++ b/resources/profiles/SecKit/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"8000"
 	],
diff --git a/resources/profiles/SecKit/process/fdm_process_common.json b/resources/profiles/SecKit/process/fdm_process_common.json
index dc8cfe5838..11a4dc616e 100644
--- a/resources/profiles/SecKit/process/fdm_process_common.json
+++ b/resources/profiles/SecKit/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/SecKit/process/fdm_process_seckit_common.json b/resources/profiles/SecKit/process/fdm_process_seckit_common.json
index d5aca251f3..f29305479e 100644
--- a/resources/profiles/SecKit/process/fdm_process_seckit_common.json
+++ b/resources/profiles/SecKit/process/fdm_process_seckit_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/SeeMeCNC.json b/resources/profiles/SeeMeCNC.json
index 4bc30dee93..21db5e4e3e 100644
--- a/resources/profiles/SeeMeCNC.json
+++ b/resources/profiles/SeeMeCNC.json
@@ -1,6 +1,6 @@
 {
 	"name": "SeeMeCNC",
-	"version": "2.4.0.03",
+	"version": "2.4.0.05",
 	"force_update": "1",
 	"description": "SeeMeCNC configurations - Full profile set for Artemis, BOSSdelta, and RostockMAX printers",
 	"machine_model_list": [
@@ -50,10 +50,6 @@
 			"name": "SeeMeCNC process base 1.0mm",
 			"sub_path": "process/SeeMeCNC_process_base_1.0mm.json"
 		},
-		{
-			"name": "SeeMeCNC process base",
-			"sub_path": "process/SeeMeCNC_process_base.json"
-		},
 		{
 			"name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.16mm Fine @SeeMeCNC Artemis 0.4.json"
@@ -86,34 +82,6 @@
 			"name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
 			"sub_path": "process/0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json"
 		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC Artemis 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json"
-		},
 		{
 			"name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.20mm Standard @SeeMeCNC Artemis 0.4.json"
@@ -170,34 +138,6 @@
 			"name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
 			"sub_path": "process/0.24mm Draft @SeeMeCNC RostockMAX v4 0.4.json"
 		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC Artemis 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json"
-		},
 		{
 			"name": "0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC Artemis 0.4.json"
@@ -227,32 +167,60 @@
 			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC Artemis 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC Artemis 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC Artemis 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v4 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json"
 		},
 		{
 			"name": "0.30mm Draft @SeeMeCNC Artemis 0.5",
@@ -282,34 +250,6 @@
 			"name": "0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
 			"sub_path": "process/0.30mm Draft @SeeMeCNC RostockMAX v4 0.5.json"
 		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC Artemis 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7.json"
-		},
 		{
 			"name": "0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
 			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC Artemis 0.5.json"
@@ -338,6 +278,62 @@
 			"name": "0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
 			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5.json"
 		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7.json"
+		},
 		{
 			"name": "0.35mm Standard @SeeMeCNC Artemis 0.7",
 			"sub_path": "process/0.35mm Standard @SeeMeCNC Artemis 0.7.json"
@@ -394,34 +390,6 @@
 			"name": "0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7",
 			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7.json"
 		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC Artemis 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC Artemis 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v4 1.0.json"
-		},
 		{
 			"name": "0.42mm Draft @SeeMeCNC Artemis 0.7",
 			"sub_path": "process/0.42mm Draft @SeeMeCNC Artemis 0.7.json"
@@ -478,6 +446,34 @@
 			"name": "0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
 			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7.json"
 		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v4 1.0.json"
+		},
 		{
 			"name": "0.50mm Standard @SeeMeCNC Artemis 1.0",
 			"sub_path": "process/0.50mm Standard @SeeMeCNC Artemis 1.0.json"
@@ -561,6 +557,10 @@
 		{
 			"name": "0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0",
 			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0.json"
+		},
+		{
+			"name": "SeeMeCNC process base",
+			"sub_path": "process/SeeMeCNC_process_base.json"
 		}
 	],
 	"filament_list": [
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json
deleted file mode 100644
index d5df31d0aa..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.4 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "FOSiDadyHyp8WKTb",
-	"filament_id": "SMCFB00104"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json
deleted file mode 100644
index 6cdf1850d4..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.5 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "XzvEoqhK0cx7JieM",
-	"filament_id": "SMCFB00105"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json
deleted file mode 100644
index 8bdd0003fc..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.7 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "RbmLGSWPaVvl0NNr",
-	"filament_id": "SMCFB00107"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json
deleted file mode 100644
index 0d060b85f3..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 1.0 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "DTcAxACOOtdvD43R",
-	"filament_id": "SMCFB00110"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json
deleted file mode 100644
index fcde530598..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.4 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "jf0puhp8kCuwL3jt",
-	"filament_id": "SMCFN00104"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json
deleted file mode 100644
index 0439f58952..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.5 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "c3gXbtFjJn4aK7pL",
-	"filament_id": "SMCFN00105"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json
deleted file mode 100644
index d14e219656..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.7 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "7sDIfUAs3Ftv7uUD",
-	"filament_id": "SMCFN00107"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json
deleted file mode 100644
index aa760ceef2..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 1.0 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "nr7CBE99WoHXy4Dw",
-	"filament_id": "SMCFN00110"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json
deleted file mode 100644
index bb37dfdbd4..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.4 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "kqCiusj7FAzbmnro",
-	"filament_id": "SMCFG00104"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json
deleted file mode 100644
index a0dab684b8..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.5 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "85J1rc8KxOc7v2cF",
-	"filament_id": "SMCFG00105"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json
deleted file mode 100644
index 3285e22d73..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.7 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "QI1p2Hi76cWlfRwC",
-	"filament_id": "SMCFG00107"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_1_0mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_1_0mm.json
deleted file mode 100644
index ac5455210d..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_1_0mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 1.0 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"7"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "Njx1ZHccqqJzQ7AQ",
-	"filament_id": "SMCFG00110"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_4mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_4mm.json
deleted file mode 100644
index 01ef0f3562..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_4mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.4 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "ulVlpkQVbvkSpmli",
-	"filament_id": "SMCFG00204"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_5mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_5mm.json
deleted file mode 100644
index 0b3d526c6b..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_5mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.5 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "jK9Gr2VDAnOKrkPW",
-	"filament_id": "SMCFG00205"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_7mm.json
deleted file mode 100644
index e2172b6707..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_7mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.7 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "Gn57oqh6nMBO651i",
-	"filament_id": "SMCFG00207"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_1_0mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_1_0mm.json
deleted file mode 100644
index 1fabd765d4..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_1_0mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 1.0 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "nzRT23S6xk1bxbDJ",
-	"filament_id": "SMCFG00210"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_4mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_4mm.json
deleted file mode 100644
index 9d216c2e7c..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_4mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.4 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "k3oaCcJHHyAuRi6J",
-	"filament_id": "SMCFL00104"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_5mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_5mm.json
deleted file mode 100644
index 1f8a314c20..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_5mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.5 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "CcINW4WttiNsKvjf",
-	"filament_id": "SMCFL00105"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_7mm.json
deleted file mode 100644
index ea51621992..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_7mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.7 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "pOuc1eXMLLOBqHuz",
-	"filament_id": "SMCFL00107"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_1_0mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_1_0mm.json
deleted file mode 100644
index b720b87de2..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_1_0mm.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 1.0 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "jSvqBk6R6HAaTRxk",
-	"filament_id": "SMCFL00110"
-}
diff --git a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU_0_7mm.json b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU_0_7mm.json
deleted file mode 100644
index dea7bb7820..0000000000
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU_0_7mm.json
+++ /dev/null
@@ -1,51 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC TPU 0.7 nozzle",
-	"inherits": "SeeMeCNC TPU",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC TPU 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm TPU Vase @SeeMeCNC Artemis 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"7"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "4LUkyKiKFb96OeC0",
-	"filament_id": "SMCFU00107"
-}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json
index 4230dbffa0..23ccc8cd08 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json
index 4ed8e34f2a..f16bdf8620 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json
index 7e457fd6d4..7bf1733799 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json
index e6beab9437..68316ff085 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json
index b3c0d66457..4709989e11 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json
index 3171ed1d16..a09599a118 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json
index 60aea06e56..a045d6acb6 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json
index 52131a4df3..4fbdc6cdf0 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json
index d9bbabfd46..1d40d2b7d8 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json
index 48054cbc25..f007e2c307 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json
index 60653bd138..ae455b50bc 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json
index 29aab8351f..28a865c33e 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json
index ca0c54be9b..6db1c32408 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json
index e66ebbb170..0bba926946 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json
index 33db8f630d..623edc7966 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json
index 2b9d48d170..9f1b324a3b 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json
index 765cbd623f..51ca348ee2 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json
index 20c6446d2e..78638f67ad 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json
index fc91f14b28..d3d58505ed 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json
index 01ab5d5a2a..c2ffdb20a0 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json
index 2b0a6a71ae..c53c7f7085 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json
index b2ba2a38aa..3e8b24699f 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json
index fae10fc27c..d1fd58da56 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json
index f65c62f6fe..648c797d61 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json
index 38c29c2462..39252fa29e 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json
index f54bc1bcb6..f1dbfc5e2f 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json
index 51cef23180..c7bce4faca 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json
index 0342bbae65..f1ec174cf2 100644
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json
@@ -312,7 +312,6 @@
 		"60"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
@@ -349,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 0407dca2ec..06acef0b0e 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.12",
+	"version": "02.04.00.15",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -194,18 +194,42 @@
 			"name": "fdm_process_idex",
 			"sub_path": "process/fdm_process_idex.json"
 		},
+		{
+			"name": "fdm_process_U1_0.06_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
+		},
 		{
 			"name": "fdm_process_U1_0.08",
 			"sub_path": "process/fdm_process_U1_0.08.json"
 		},
+		{
+			"name": "fdm_process_U1_0.08_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.10_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json"
+		},
 		{
 			"name": "fdm_process_U1_0.12",
 			"sub_path": "process/fdm_process_U1_0.12.json"
 		},
+		{
+			"name": "fdm_process_U1_0.12_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.14_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json"
+		},
 		{
 			"name": "fdm_process_U1_0.16",
 			"sub_path": "process/fdm_process_U1_0.16.json"
 		},
+		{
+			"name": "fdm_process_U1_0.18_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json"
+		},
 		{
 			"name": "fdm_process_U1_0.20",
 			"sub_path": "process/fdm_process_U1_0.20.json"
@@ -214,14 +238,58 @@
 			"name": "fdm_process_U1_0.24",
 			"sub_path": "process/fdm_process_U1_0.24.json"
 		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json"
+		},
 		{
 			"name": "fdm_process_U1_0.28",
 			"sub_path": "process/fdm_process_U1_0.28.json"
 		},
+		{
+			"name": "fdm_process_U1_0.2_common",
+			"sub_path": "process/fdm_process_U1_0.2_common.json"
+		},
+		{
+			"name": "fdm_process_U1_0.30_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.32_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.36_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.40_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.42_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.48_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.56_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json"
+		},
 		{
 			"name": "fdm_process_U1_0.6_common",
 			"sub_path": "process/fdm_process_U1_0.6_common.json"
 		},
+		{
+			"name": "fdm_process_U1_0.8_common",
+			"sub_path": "process/fdm_process_U1_0.8_common.json"
+		},
 		{
 			"name": "0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle)",
 			"sub_path": "process/0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle).json"
@@ -402,6 +470,14 @@
 			"name": "0.48 Draft @Snapmaker J1 (0.8 nozzle)",
 			"sub_path": "process/0.48 Draft @Snapmaker J1 (0.8 nozzle).json"
 		},
+		{
+			"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json"
+		},
+		{
+			"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json"
+		},
 		{
 			"name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json"
@@ -410,6 +486,22 @@
 			"name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json"
+		},
+		{
+			"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json"
+		},
+		{
+			"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json"
+		},
+		{
+			"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json"
+		},
 		{
 			"name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json"
@@ -418,6 +510,14 @@
 			"name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json"
+		},
+		{
+			"name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json"
+		},
 		{
 			"name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json"
@@ -426,6 +526,10 @@
 			"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json"
+		},
 		{
 			"name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json"
@@ -454,10 +558,50 @@
 			"name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json"
+		},
 		{
 			"name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json"
+		},
+		{
+			"name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json"
+		},
+		{
+			"name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
+			"sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json"
+		},
+		{
+			"name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json"
+		},
+		{
+			"name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json"
+		},
 		{
 			"name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
 			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json"
@@ -473,150 +617,6 @@
 		{
 			"name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
 			"sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
-		},
-		{
-			"name": "fdm_process_U1_0.2_common",
-			"sub_path": "process/fdm_process_U1_0.2_common.json"
-		},
-		{
-			"name": "fdm_process_U1_0.8_common",
-			"sub_path": "process/fdm_process_U1_0.8_common.json"
-		},
-		{
-			"name": "fdm_process_U1_0.06_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.08_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.10_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.12_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.14_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.18_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.24_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.24_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.30_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.32_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.36_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.40_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.42_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.48_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.56_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json"
-		},
-		{
-			"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
-			"sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json"
-		},
-		{
-			"name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json"
-		},
-		{
-			"name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json"
-		},
-		{
-			"name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json"
-		},
-		{
-			"name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json"
-		},
-		{
-			"name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json"
 		}
 	],
 	"filament_list": [
@@ -624,14 +624,26 @@
 			"name": "PolyTerra PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyTerra PLA @0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PLA Basic @U1 base",
+			"sub_path": "filament/Snapmaker PLA Basic @U1 base.json"
+		},
 		{
 			"name": "Snapmaker PLA Lite @U1 base",
 			"sub_path": "filament/Snapmaker PLA Lite @U1 base.json"
 		},
+		{
+			"name": "Snapmaker PLA Matte @U1 base2",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 base2.json"
+		},
 		{
 			"name": "Snapmaker PLA SnapSpeed @U1 base",
 			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base.json"
 		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 base2",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json"
+		},
 		{
 			"name": "Snapmaker TPU 95A @U1 base",
 			"sub_path": "filament/Snapmaker TPU 95A @U1 base.json"
@@ -648,14 +660,62 @@
 			"name": "PolyTerra J1 PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PLA Basic @U1",
+			"sub_path": "filament/Snapmaker PLA Basic @U1.json"
+		},
+		{
+			"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1",
+			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA Lite @U1",
 			"sub_path": "filament/Snapmaker PLA Lite @U1.json"
 		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA SnapSpeed @U1",
 			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1.json"
 		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker TPU 95A @U1",
 			"sub_path": "filament/Snapmaker TPU 95A @U1.json"
@@ -840,6 +900,14 @@
 			"name": "Snapmaker PETG @base",
 			"sub_path": "filament/Snapmaker PETG @base.json"
 		},
+		{
+			"name": "Snapmaker PETG HF @U1 base2",
+			"sub_path": "filament/Snapmaker PETG HF @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 base.json"
+		},
 		{
 			"name": "Snapmaker PETG-CF @U1 base",
 			"sub_path": "filament/Snapmaker PETG-CF @U1 base.json"
@@ -988,6 +1056,10 @@
 			"name": "Polymaker PLA @Snapmaker U1 base",
 			"sub_path": "filament/Polymaker/Polymaker PLA @Snapmaker U1 base.json"
 		},
+		{
+			"name": "Polymaker PLA @U1 base",
+			"sub_path": "filament/Polymaker PLA @U1 base.json"
+		},
 		{
 			"name": "Polymaker PLA Pro @Base",
 			"sub_path": "filament/Polymaker/Polymaker PLA Pro @Base.json"
@@ -1048,6 +1120,10 @@
 			"name": "Snapmaker PLA @base",
 			"sub_path": "filament/Snapmaker PLA @base.json"
 		},
+		{
+			"name": "Snapmaker PLA Glow @U1 base",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 base.json"
+		},
 		{
 			"name": "Snapmaker PLA Metal @U1 base",
 			"sub_path": "filament/Snapmaker PLA Metal @U1 base.json"
@@ -1060,6 +1136,34 @@
 			"name": "Snapmaker PLA Silk @base",
 			"sub_path": "filament/Snapmaker PLA Silk @base.json"
 		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA-CF @U1 base",
 			"sub_path": "filament/Snapmaker PLA-CF @U1 base.json"
@@ -1096,6 +1200,30 @@
 			"name": "Snapmaker J1 TPU @base",
 			"sub_path": "filament/Snapmaker J1 TPU @base.json"
 		},
+		{
+			"name": "Snapmaker TPU 90A @U1",
+			"sub_path": "filament/Snapmaker TPU 90A @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker TPU @U1 base",
 			"sub_path": "filament/Snapmaker TPU @U1 base.json"
@@ -1316,6 +1444,34 @@
 			"name": "Snapmaker PETG @0.2 nozzle",
 			"sub_path": "filament/Snapmaker PETG @0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PETG-CF @U1",
 			"sub_path": "filament/Snapmaker PETG-CF @U1.json"
@@ -1460,6 +1616,18 @@
 			"name": "Polymaker PLA @Snapmaker U1",
 			"sub_path": "filament/Polymaker/Polymaker PLA @Snapmaker U1.json"
 		},
+		{
+			"name": "Polymaker General PLA Family @U1",
+			"sub_path": "filament/Polymaker General PLA Family @U1.json"
+		},
+		{
+			"name": "Polymaker Silk PLA Family @U1",
+			"sub_path": "filament/Polymaker Silk PLA Family @U1.json"
+		},
+		{
+			"name": "Polymaker Tough PLA Family @U1",
+			"sub_path": "filament/Polymaker Tough PLA Family @U1.json"
+		},
 		{
 			"name": "Polymaker PLA Pro @Snapmaker U1",
 			"sub_path": "filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json"
@@ -1560,6 +1728,10 @@
 			"name": "Snapmaker PLA",
 			"sub_path": "filament/Snapmaker PLA.json"
 		},
+		{
+			"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA Metal @U1",
 			"sub_path": "filament/Snapmaker PLA Metal @U1.json"
@@ -1572,6 +1744,22 @@
 			"name": "Snapmaker PLA Silk @0.2 nozzle",
 			"sub_path": "filament/Snapmaker PLA Silk @0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA-CF",
 			"sub_path": "filament/Snapmaker PLA-CF.json"
@@ -1612,6 +1800,14 @@
 			"name": "Snapmaker PVA @U1",
 			"sub_path": "filament/Snapmaker PVA @U1.json"
 		},
+		{
+			"name": "Snapmaker PVA @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PVA",
 			"sub_path": "filament/Snapmaker PVA.json"
@@ -1712,26 +1908,6 @@
 			"name": "Snapmaker Breakaway Support For PLA @U1",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json"
 		},
-		{
-			"name": "PolyTerra J1 PLA",
-			"sub_path": "filament/Polymaker/PolyTerra J1 PLA.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 base",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
-		},
-		{
-			"name": "Polymaker PLA @U1 base",
-			"sub_path": "filament/Polymaker PLA @U1 base.json"
-		},
-		{
-			"name": "Polymaker Silk PLA Family @U1",
-			"sub_path": "filament/Polymaker Silk PLA Family @U1.json"
-		},
-		{
-			"name": "Polymaker Tough PLA Family @U1",
-			"sub_path": "filament/Polymaker Tough PLA Family @U1.json"
-		},
 		{
 			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json"
@@ -1745,188 +1921,12 @@
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Snapmaker PETG HF @U1 base2",
-			"sub_path": "filament/Snapmaker PETG HF @U1 base2.json"
+			"name": "PolyTerra J1 PLA",
+			"sub_path": "filament/Polymaker/PolyTerra J1 PLA.json"
 		},
 		{
-			"name": "Snapmaker PETG Translucent @U1 base",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Basic @U1 base",
-			"sub_path": "filament/Snapmaker PLA Basic @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Glow @U1 base",
-			"sub_path": "filament/Snapmaker PLA Glow @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 base2",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 base2.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 base2",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 base",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1",
-			"sub_path": "filament/Snapmaker TPU 90A @U1.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1",
-			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
-		},
-		{
-			"name": "Polymaker General PLA Family @U1",
-			"sub_path": "filament/Polymaker General PLA Family @U1.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Basic @U1",
-			"sub_path": "filament/Snapmaker PLA Basic @U1.json"
-		},
-		{
-			"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
+			"name": "Snapmaker PLA Matte @U1 base",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
 		}
 	],
 	"machine_list": [
@@ -2050,6 +2050,10 @@
 			"name": "fdm_a400",
 			"sub_path": "machine/fdm_a400.json"
 		},
+		{
+			"name": "Snapmaker U1 (0.2 nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.2 nozzle).json"
+		},
 		{
 			"name": "Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "machine/Snapmaker U1 (0.4 nozzle).json"
@@ -2062,6 +2066,10 @@
 			"name": "Snapmaker U1 (0.6 nozzle)",
 			"sub_path": "machine/Snapmaker U1 (0.6 nozzle).json"
 		},
+		{
+			"name": "Snapmaker U1 (0.8 nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.8 nozzle).json"
+		},
 		{
 			"name": "Snapmaker A250 BKit (0.2 nozzle)",
 			"sub_path": "machine/Snapmaker A250 BKit (0.2 nozzle).json"
@@ -2325,14 +2333,6 @@
 		{
 			"name": "Snapmaker A350 Dual QS+B Kit (0.8 nozzle)",
 			"sub_path": "machine/Snapmaker A350 Dual QS+B Kit (0.8 nozzle).json"
-		},
-		{
-			"name": "Snapmaker U1 (0.2 nozzle)",
-			"sub_path": "machine/Snapmaker U1 (0.2 nozzle).json"
-		},
-		{
-			"name": "Snapmaker U1 (0.8 nozzle)",
-			"sub_path": "machine/Snapmaker U1 (0.8 nozzle).json"
 		}
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1 base.json
index 693553bdcb..86648d6096 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1 base.json	
@@ -15,13 +15,13 @@
 		"1"
 	],
 	"cool_plate_temp": [
-		"105"
+		"100"
 	],
 	"cool_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp_initial_layer": [
 		"100"
@@ -48,7 +48,7 @@
 		"Polymaker"
 	],
 	"hot_plate_temp": [
-		"105"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
 		"100"
@@ -72,7 +72,7 @@
 		"110.8"
 	],
 	"textured_plate_temp": [
-		"105"
+		"100"
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json
index 5e1cfa7c61..ee28c2b059 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json	
@@ -15,16 +15,16 @@
 		"1"
 	],
 	"cool_plate_temp": [
-		"105"
+		"100"
 	],
 	"cool_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"fan_cooling_layer_time": [
 		"12"
@@ -51,10 +51,10 @@
 		"Polymaker"
 	],
 	"hot_plate_temp": [
-		"105"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"nozzle_temperature": [
 		"300"
@@ -81,10 +81,10 @@
 		"110"
 	],
 	"textured_plate_temp": [
-		"105"
+		"100"
 	],
 	"textured_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"filament_type": [
 		"ABS"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json
index 67754ade09..af8c929c82 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json	
@@ -9,10 +9,10 @@
 		""
 	],
 	"hot_plate_temp": [
-		"110"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"overhang_fan_speed": [
 		"20"
@@ -35,12 +35,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json
index 413c14cebb..409bbdd793 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json	
@@ -9,7 +9,7 @@
 		""
 	],
 	"hot_plate_temp": [
-		"110"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
 		"100"
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json
index f421f08c94..21638631aa 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json	
@@ -43,12 +43,6 @@
 	"filament_unloading_speed": [
 		"25"
 	],
-	"filament_load_time": [
-		"0"
-	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_cooling_moves": [
 		"0"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json
index 2629e15051..478a0195bd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json	
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json
index 5f1f1bd74f..4344959e27 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json	
@@ -40,12 +40,6 @@
 	"filament_unloading_speed": [
 		"25"
 	],
-	"filament_load_time": [
-		"0"
-	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_cooling_moves": [
 		"0"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json
index 7f54df76bb..fe567e1744 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json	
@@ -29,12 +29,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json
index bdb539a065..46644cc06a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json	
@@ -17,12 +17,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json
index 5390ffe222..de2e0c9765 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json	
@@ -29,12 +29,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json
index 84cd37dfe7..4a93202495 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json
index ea5c61eb3b..12b546ebb1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json	
@@ -29,12 +29,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json
index 5e8a40a8af..8e9a3b5f12 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json	
@@ -44,12 +44,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json
index 1d8a6fe9ba..dff0922c5c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json	
@@ -20,12 +20,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json
index 0f880ac980..86540058c8 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json
index 6838983e1b..9daad839c2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json
index 7080dddad1..3cb49e16e7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json	
@@ -26,12 +26,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json
index f2024f8ddf..1272b220a1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json	
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json
index d9b45b5f79..768a85d0db 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json	
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json
index d9bc0f80ed..2fd81db581 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json	
@@ -17,12 +17,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json
index 903ea5c744..327f146f45 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json	
@@ -17,12 +17,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json
index 3d3e47b701..83a7666218 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json	
@@ -54,12 +54,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json
index 62b54feb70..b402e7f76a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json	
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json
index 2dae11ec36..0741102696 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json	
@@ -26,12 +26,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json
index ce0e7c8122..d081c6f9d8 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json	
@@ -32,12 +32,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json
index 47869c9779..076dc7e2b9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json	
@@ -47,12 +47,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json
index 5611cb34f3..3f41d5579e 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json
index d6e7e209c6..e29003f72c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json	
@@ -25,12 +25,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json
index c305704269..67e0d74b2e 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json	
@@ -26,12 +26,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json
index e69ca63254..97d2a7ea61 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json
index 21384a0567..9f4ff4b7f9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json	
@@ -22,12 +22,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json
index d8b3ebef60..31607ed7c6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json	
@@ -22,12 +22,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json
index 109dbc19e7..6c56447e5a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json	
@@ -25,12 +25,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json
index 1db2d82548..87c26fdb09 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json	
@@ -29,12 +29,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json
index 37bc90db26..5f0ca9ed36 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json	
@@ -35,12 +35,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json
index b87c48cbe5..5391a85078 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json	
@@ -22,12 +22,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json
index 1ed79183c9..4b67d00391 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json	
@@ -23,12 +23,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json
index 962c6fcccb..cfdfe78b74 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json	
@@ -35,12 +35,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json
index 206f024091..f2b2033dd9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json	
@@ -20,12 +20,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json
index 6ad1de856e..7a43d5715a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json	
@@ -20,12 +20,6 @@
 	"filament_unloading_speed": [
 		"35"
 	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
 	"filament_cooling_moves": [
 		"2"
 	],
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_common.json b/resources/profiles/Snapmaker/filament/fdm_filament_common.json
index 04c0a64a6f..82b033cda5 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_common.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_common.json
@@ -114,12 +114,6 @@
 	"filament_unloading_speed": [
 		"25"
 	],
-	"filament_load_time": [
-		"0"
-	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_toolchange_delay": [
 		"0"
 	],
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json
index a6e55cb7bd..6a96cfb494 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "1921635482",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json
index 3544179344..80ace374c7 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "1463587605",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json
index 89845097d4..733d7096fb 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "3396626756",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json
index f6c9ae9663..83e77458c1 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "2661871200",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json
index a1c0587025..86085a641a 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "2728546690",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json
index c28a8b0e39..937bf20bdd 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "3626883798",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json
index a47a224e8f..dd0b5e8e46 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "3817522582",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250.json b/resources/profiles/Snapmaker/machine/Snapmaker A250.json
index acdd0983c6..16a93e5957 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A250.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A250.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "261851393",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A250_bed.stl",
 	"bed_texture": "Snapmaker A250_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json
index 69dbfea029..60a09d7519 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "3190019076",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json
index b0d390f5e3..321002ad53 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "2326416016",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json
index a2971119fb..6ca04fc169 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "1305649671",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json
index 0154fcf801..7798d13413 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "61280022",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json
index 5c7b9aede1..f18dc6cfcf 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "1846038812",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350 Dual_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json
index 0d780ef3d5..dd71d8312c 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "1133024953",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json
index 433fffebef..80573646c4 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "4109488597",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350.json b/resources/profiles/Snapmaker/machine/Snapmaker A350.json
index 231c8a7137..de5b92e6c5 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker A350.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker A350.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "240771894",
+	"default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA",
 	"bed_model": "Snapmaker A350_bed.stl",
 	"bed_texture": "Snapmaker A350_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json b/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json
index 667d195628..e3a3f17c24 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "797581801",
+	"default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA",
 	"bed_model": "Snapmaker Artisan_bed.stl",
 	"bed_texture": "Snapmaker Artisan_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker J1.json b/resources/profiles/Snapmaker/machine/Snapmaker J1.json
index 46ef45fa15..087d33768f 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker J1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker J1.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "https://github.com/macdylan",
 	"model_id": "199828459",
+	"default_materials": "PolyTerra J1 PLA @0.2 nozzle;PolyTerra J1 PLA",
 	"bed_model": "Snapmaker J1_bed.stl",
 	"bed_texture": "Snapmaker J1_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
index fb703f2e75..96eb53f81a 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -5,6 +5,7 @@
 	"family": "Snapmaker",
 	"url": "",
 	"model_id": "797581801",
+	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
 	"bed_model": "Snapmaker U1_bed.stl",
 	"bed_texture": "Snapmaker U1_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8"
diff --git a/resources/profiles/Snapmaker/machine/fdm_common.json b/resources/profiles/Snapmaker/machine/fdm_common.json
index 50b8cb2cdd..fac7898ce3 100644
--- a/resources/profiles/Snapmaker/machine/fdm_common.json
+++ b/resources/profiles/Snapmaker/machine/fdm_common.json
@@ -7,7 +7,6 @@
 	"pause_gcode": "M600 ;pause print",
 	"nozzle_type": "hardened_steel",
 	"use_relative_e_distances": "1",
-	"silent_mode": "0",
 	"auxiliary_fan": "0",
 	"remaining_times": "1",
 	"single_extruder_multi_material": "0",
diff --git a/resources/profiles/Snapmaker/machine/fdm_klipper.json b/resources/profiles/Snapmaker/machine/fdm_klipper.json
index ccb53f7e7d..ca389bdf37 100644
--- a/resources/profiles/Snapmaker/machine/fdm_klipper.json
+++ b/resources/profiles/Snapmaker/machine/fdm_klipper.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
index 1b6a068387..aadd744bf0 100644
--- a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
+++ b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json
index 3dec06228e..15546ce4bb 100644
--- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json
index 7c80e048f6..3881460bda 100644
--- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json
index b8a8e126aa..0a3ba43c86 100644
--- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "Tayg0K1WRyJMLoke",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json
index 27d3903f06..2aeb309d58 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json
index 677e6742d9..107731b2cb 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "150",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json
index b4728bd60f..ea8c719085 100644
--- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json
index 80b2120807..6fc26cd55f 100644
--- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json
index 80739205ac..d33ce1c083 100644
--- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json
index 2da54a6dc3..6de6d483da 100644
--- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "xBU1j8ldOefYfosp",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json
index 9302a40421..a5f215d7f3 100644
--- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "180",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json
index cc93a97e99..632d9614f7 100644
--- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json
index 54513eb14b..0de823db1f 100644
--- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json
index 416d85881c..1306485d6f 100644
--- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "200",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json
index 6871a3e120..838f250e8c 100644
--- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "ERcgRLp5bQo1hgz8",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json
index 77b756bffc..88fbb33812 100644
--- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json
index da92006d49..be894aa221 100644
--- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "BBXxXQCXCme2Mvy0",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json
index 5d873d5efd..443afe55dd 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "XR5r9SuWmSag5Qjo",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json
index 63bb6ea170..b4e22777e8 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json	
@@ -17,8 +17,6 @@
 	"internal_solid_infill_line_width": "105%",
 	"support_line_width": "105%",
 	"top_surface_line_width": "105%",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"slowdown_for_curled_perimeters": "0",
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json
index d1bb174a62..5c87ff68d0 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.",
 	"layer_height": "0.20",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json
index 91c5995b92..1d051fc801 100644
--- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
@@ -8,8 +8,6 @@
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
 	"outer_wall_speed": "60",
 	"sparse_infill_density": "25%",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"wall_loops": "6",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json
index 0cb85cc26d..577065ca3f 100644
--- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "4whjHJVCN44w8SPE",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json
index f98007b6e1..8e09376daf 100644
--- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "MYRo7jTenu7F0Zv4",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json
index 7a9f4e2154..2fa2eeabdb 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json
index d9e1a2bf94..316bb0dbee 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json
index 4382b11e41..8829efafdb 100644
--- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -6,8 +6,6 @@
 	"setting_id": "0fSeyAIS6z75A1r3",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json
index 52eb63a64d..defbc6740b 100644
--- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.",
 	"layer_height": "0.30",
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "40",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json
index e2d5c192bb..92bebf6219 100644
--- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json
index c216eb09d2..f268a92446 100644
--- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json
index d2c20559fd..de7559f827 100644
--- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json
index 44ea3bb3f4..6dc9f26329 100644
--- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json
index 37238fb0ea..b18e30c210 100644
--- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.",
 	"layer_height": "0.40",
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "30",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json
index 8d00eb9fab..b0cf935465 100644
--- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json
index d3e4bf7f07..eaa04faadc 100644
--- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json
index d6cdf607dd..599cf24db5 100644
--- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json
index 9f67114c20..ca728fe66a 100644
--- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json
index 72dab0c16b..4e0d7bf6e6 100644
--- a/resources/profiles/Snapmaker/process/fdm_process_U1.json
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_U1",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
@@ -66,7 +65,5 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"compatible_printers": [],
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "24"
+	"compatible_printers": []
 }
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json
index 462ddb53ae..5240f242c4 100644
--- a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Snapmaker/process/fdm_process_common.json b/resources/profiles/Snapmaker/process/fdm_process_common.json
index 458a0f6162..13e5825ebd 100644
--- a/resources/profiles/Snapmaker/process/fdm_process_common.json
+++ b/resources/profiles/Snapmaker/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"layer_height": "0.2",
 	"initial_layer_print_height": "0.3",
 	"line_width": "0.42",
@@ -72,7 +71,6 @@
 	"infill_combination": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"ensure_vertical_shell_thickness": "1",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "50",
 	"initial_layer_travel_speed": "80%",
@@ -86,7 +84,6 @@
 	"support_interface_speed": "50",
 	"ironing_speed": "35",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "35",
 	"overhang_2_4_speed": "25",
 	"overhang_3_4_speed": "15",
@@ -129,7 +126,6 @@
 	"tree_support_adaptive_layer_height": "1",
 	"tree_support_auto_brim": "1",
 	"tree_support_brim_width": "3",
-	"tree_support_with_infill": "0",
 	"support_top_z_distance": "0.12",
 	"support_bottom_z_distance": "0.12",
 	"support_base_pattern": "rectilinear",
diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json
index a38645abc2..7f08417ed7 100644
--- a/resources/profiles/Sovol.json
+++ b/resources/profiles/Sovol.json
@@ -1,7 +1,7 @@
 {
 	"name": "Sovol",
 	"url": "",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Sovol configurations",
 	"machine_model_list": [
@@ -201,82 +201,66 @@
 		}
 	],
 	"filament_list": [
-		{
-			"name": "Generic ABS @Sovol SV08 MAX",
-			"sub_path": "filament/Generic ABS @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Generic PC @Sovol SV08 MAX",
-			"sub_path": "filament/Generic PC @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Generic PETG @Sovol SV08 MAX",
-			"sub_path": "filament/Generic PETG @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Generic PLA @Sovol SV08 MAX",
-			"sub_path": "filament/Generic PLA @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Generic PLA Silk @Sovol SV08 MAX",
-			"sub_path": "filament/Generic PLA Silk @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Generic TPU @Sovol SV08 MAX",
-			"sub_path": "filament/Generic TPU @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Polymaker PETG @Sovol SV08 MAX",
-			"sub_path": "filament/Polymaker PETG @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "SUNLU PETG @Sovol SV08 MAX",
-			"sub_path": "filament/SUNLU PETG @Sovol SV08 MAX.json"
-		},
 		{
 			"name": "Generic ABS @Sovol SV06 ACE",
 			"sub_path": "filament/Generic ABS @Sovol SV06 ACE.json"
 		},
-		{
-			"name": "Generic PETG @Sovol SV06 ACE",
-			"sub_path": "filament/Generic PETG @Sovol SV06 ACE.json"
-		},
-		{
-			"name": "Generic PLA @Sovol SV06 ACE",
-			"sub_path": "filament/Generic PLA @Sovol SV06 ACE.json"
-		},
-		{
-			"name": "Generic TPU @Sovol SV06 ACE",
-			"sub_path": "filament/Generic TPU @Sovol SV06 ACE.json"
-		},
 		{
 			"name": "Generic ABS @Sovol SV06 Plus ACE",
 			"sub_path": "filament/Generic ABS @Sovol SV06 Plus ACE.json"
 		},
+		{
+			"name": "Generic ABS @Sovol SV08",
+			"sub_path": "filament/Generic ABS @Sovol SV08.json"
+		},
+		{
+			"name": "Generic ABS @Sovol SV08 MAX",
+			"sub_path": "filament/Generic ABS @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "Generic ABS @Sovol Zero",
+			"sub_path": "filament/Generic ABS @Sovol Zero.json"
+		},
+		{
+			"name": "Generic PC @Sovol SV08 MAX",
+			"sub_path": "filament/Generic PC @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "Generic PC @Sovol Zero",
+			"sub_path": "filament/Generic PC @Sovol Zero.json"
+		},
+		{
+			"name": "Generic PETG @Sovol SV06 ACE",
+			"sub_path": "filament/Generic PETG @Sovol SV06 ACE.json"
+		},
 		{
 			"name": "Generic PETG @Sovol SV06 Plus ACE",
 			"sub_path": "filament/Generic PETG @Sovol SV06 Plus ACE.json"
 		},
+		{
+			"name": "Generic PETG @Sovol SV08",
+			"sub_path": "filament/Generic PETG @Sovol SV08.json"
+		},
+		{
+			"name": "Generic PETG @Sovol SV08 MAX",
+			"sub_path": "filament/Generic PETG @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "Generic PETG @Sovol Zero",
+			"sub_path": "filament/Generic PETG @Sovol Zero.json"
+		},
+		{
+			"name": "Generic PLA @Sovol SV06 ACE",
+			"sub_path": "filament/Generic PLA @Sovol SV06 ACE.json"
+		},
 		{
 			"name": "Generic PLA @Sovol SV06 Plus ACE",
 			"sub_path": "filament/Generic PLA @Sovol SV06 Plus ACE.json"
 		},
-		{
-			"name": "Generic TPU @Sovol SV06 Plus ACE",
-			"sub_path": "filament/Generic TPU @Sovol SV06 Plus ACE.json"
-		},
 		{
 			"name": "Generic PLA @Sovol SV07",
 			"sub_path": "filament/Generic PLA @Sovol SV07.json"
 		},
-		{
-			"name": "Generic ABS @Sovol SV08",
-			"sub_path": "filament/Generic ABS @Sovol SV08.json"
-		},
-		{
-			"name": "Generic PETG @Sovol SV08",
-			"sub_path": "filament/Generic PETG @Sovol SV08.json"
-		},
 		{
 			"name": "Generic PLA @Sovol SV08",
 			"sub_path": "filament/Generic PLA @Sovol SV08.json"
@@ -286,44 +270,60 @@
 			"sub_path": "filament/Generic PLA @Sovol SV08 0.2 nozzle.json"
 		},
 		{
-			"name": "Generic TPU @Sovol SV08",
-			"sub_path": "filament/Generic TPU @Sovol SV08.json"
-		},
-		{
-			"name": "Generic ABS @Sovol Zero",
-			"sub_path": "filament/Generic ABS @Sovol Zero.json"
-		},
-		{
-			"name": "Generic PC @Sovol Zero",
-			"sub_path": "filament/Generic PC @Sovol Zero.json"
-		},
-		{
-			"name": "Generic PETG @Sovol Zero",
-			"sub_path": "filament/Generic PETG @Sovol Zero.json"
-		},
-		{
-			"name": "Sovol Zero PETG HS Nozzle",
-			"sub_path": "filament/Sovol Zero PETG HS Nozzle.json"
+			"name": "Generic PLA @Sovol SV08 MAX",
+			"sub_path": "filament/Generic PLA @Sovol SV08 MAX.json"
 		},
 		{
 			"name": "Generic PLA @Sovol Zero",
 			"sub_path": "filament/Generic PLA @Sovol Zero.json"
 		},
 		{
-			"name": "Sovol Zero PLA Basic HS Nozzle",
-			"sub_path": "filament/Sovol Zero PLA Basic HS Nozzle.json"
+			"name": "Generic PLA Silk @Sovol SV08 MAX",
+			"sub_path": "filament/Generic PLA Silk @Sovol SV08 MAX.json"
 		},
 		{
 			"name": "Generic PLA Silk @Sovol Zero",
 			"sub_path": "filament/Generic PLA Silk @Sovol Zero.json"
 		},
 		{
-			"name": "Sovol Zero PLA Silk HS Nozzle",
-			"sub_path": "filament/Sovol Zero PLA Silk HS Nozzle.json"
+			"name": "Generic TPU @Sovol SV06 ACE",
+			"sub_path": "filament/Generic TPU @Sovol SV06 ACE.json"
+		},
+		{
+			"name": "Generic TPU @Sovol SV06 Plus ACE",
+			"sub_path": "filament/Generic TPU @Sovol SV06 Plus ACE.json"
+		},
+		{
+			"name": "Generic TPU @Sovol SV08",
+			"sub_path": "filament/Generic TPU @Sovol SV08.json"
+		},
+		{
+			"name": "Generic TPU @Sovol SV08 MAX",
+			"sub_path": "filament/Generic TPU @Sovol SV08 MAX.json"
 		},
 		{
 			"name": "Generic TPU @Sovol Zero",
 			"sub_path": "filament/Generic TPU @Sovol Zero.json"
+		},
+		{
+			"name": "Polymaker PETG @Sovol SV08 MAX",
+			"sub_path": "filament/Polymaker PETG @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "SUNLU PETG @Sovol SV08 MAX",
+			"sub_path": "filament/SUNLU PETG @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "Sovol Zero PETG HS Nozzle",
+			"sub_path": "filament/Sovol Zero PETG HS Nozzle.json"
+		},
+		{
+			"name": "Sovol Zero PLA Basic HS Nozzle",
+			"sub_path": "filament/Sovol Zero PLA Basic HS Nozzle.json"
+		},
+		{
+			"name": "Sovol Zero PLA Silk HS Nozzle",
+			"sub_path": "filament/Sovol Zero PLA Silk HS Nozzle.json"
 		}
 	],
 	"machine_list": [
diff --git a/resources/profiles/Sovol/machine/Sovol SV08 MAX.json b/resources/profiles/Sovol/machine/Sovol SV08 MAX.json
index 92a92a9a1d..df4690f54b 100644
--- a/resources/profiles/Sovol/machine/Sovol SV08 MAX.json	
+++ b/resources/profiles/Sovol/machine/Sovol SV08 MAX.json	
@@ -8,5 +8,5 @@
 	"bed_model": "sovol_sv08_max_buildplate_model.stl",
 	"bed_texture": "sovol_sv08_max_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA;Generic PLA Silk;Generic ABS;Generic PETG;Polymaker PETG;SUNLU PETG;Generic TPU;Generic PC"
+	"default_materials": "Generic PLA @Sovol SV08 MAX;Generic PLA Silk @Sovol SV08 MAX;Generic ABS @Sovol SV08 MAX;Generic PETG @Sovol SV08 MAX;Polymaker PETG @Sovol SV08 MAX;SUNLU PETG @Sovol SV08 MAX;Generic TPU @Sovol SV08 MAX;Generic PC @Sovol SV08 MAX"
 }
diff --git a/resources/profiles/Sovol/machine/fdm_machine_common.json b/resources/profiles/Sovol/machine/fdm_machine_common.json
index 017b725d2e..0a804a2e5e 100644
--- a/resources/profiles/Sovol/machine/fdm_machine_common.json
+++ b/resources/profiles/Sovol/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -113,7 +112,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"z_hop_types": "Normal Lift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
diff --git a/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json
index 9d44b2f112..ebe3c8679f 100644
--- a/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "WQqoRN1avqbX8Pgd",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.08",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json b/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json
index 8ab14fe775..9718bacd69 100644
--- a/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "sTiNnwPQInBM8oMT",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.10",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json
index f95e107e59..fcc8cb2817 100644
--- a/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "EGRlZsIz0TvybH5a",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json b/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json
index 27723eb6fb..f4fc63ed23 100644
--- a/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "1nAnGTBSg9NbEjRl",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json
index 5a9ceee897..2f41d5a509 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "C5l9Xp7PFZJ8EUuI",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json
index b86f3c50ab..f46285f806 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "XGwpYXpDBGmz3IST",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json
index 3f5b032956..b4b0c6acaa 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "hx4TRRO93eAhKRlo",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json
index 3c7bc35311..f23714d5aa 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "rDtPKzMhHP85acXh",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json
index ab14ae1852..1c62c68ea7 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "L1YTQWBe8jGxUG5n",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json
index ca8fffec79..b11502689c 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "CCj4nI9LPvB6tBwv",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json
index 0f1251d22d..e84fae24b7 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Y7BQqmsJc3sCg5M4",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json
index a36b67382e..45a9e0f34d 100644
--- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json	
+++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dtNZVowJXglP0ygk",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json
index d4102b9521..bedd71ef41 100644
--- a/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json	
+++ b/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "S1iAf6JiKSas9AMw",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json
index a830bec966..56a3c7ad3e 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "CFwXlxanOmqsdA48",
 	"name": "0.20mm Standard @Sovol SV01",
-	"from": "system",
 	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "CFwXlxanOmqsdA48",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json
index 4d7be1276a..298356b0a5 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "i3AkK2cR13YkyVrJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json
index 65a6f16806..836581fbca 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ASEHMkWIP3Z7M6Eg",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json
index 529ffbc648..e53d0f99ee 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "qz3ogX30ClF0lLRt",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json
index 22efbbb514..44bd8afa66 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "vJmKSRBaoZ7y02CV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json
index 39f9f21d9c..28c730ac6b 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "7qkFiEhE4BGMZrDJ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json
index 45d822eb85..b913b12187 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "cremVs4Sj00nBWtu",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json
index 700232a310..511c44ad5f 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "bku5PsptBdjUrbQ6",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json
index 4781a94d88..865a30cb6d 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "D6GOAXI1isGTNnfb",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json
index 5e8957e16c..8d6484e7f8 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "88ExWsak5lVw9qYZ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json
index 7178632118..84450ca0f0 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "v0m5eV5ZVA813MVP",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json
index 32cbc84429..c3da799594 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "sPSDTG9mKjIOuy4m",
 	"name": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle",
-	"from": "system",
 	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "sPSDTG9mKjIOuy4m",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "100%",
 	"layer_height": "0.20",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json
index 3411f92dab..3584a15477 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "vYejAtfzNoeBDq00",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.20",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json
index 6b1ea0db9a..323553beaa 100644
--- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "ShJTVnJ492No1j2j",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "1",
 	"max_travel_detour_distance": "100%",
 	"layer_height": "0.20",
diff --git a/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json
index 19862486c1..d4a0610587 100644
--- a/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Ydon9OsrFa7A8L1F",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.28",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json
index 0b4210b7f3..39612b5a56 100644
--- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "n7KDWYlaTDObslGp",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.30",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json
index aa4c3fb129..3b2cb68b92 100644
--- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "VGWhB6OKWJrzkfrC",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.30",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json
index be242638fa..dc8d3df0ba 100644
--- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "EhJl99Rdzr3bYnjW",
 	"name": "0.30mm Standard @Sovol SV08 MAX 0.6 nozzle",
-	"from": "system",
 	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "EhJl99Rdzr3bYnjW",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "100%",
 	"layer_height": "0.30",
diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json
index 165d9817f9..964172accb 100644
--- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "hkA5BT13eWBp5BKQ",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.40",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json
index ccb9e95529..10e154842a 100644
--- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "THLtL3Q597dBsUgK",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.40",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json
index e56135a018..20481d3719 100644
--- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json	
+++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json	
@@ -1,11 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "5UL3y12LS7RXWO0d",
 	"name": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle",
-	"from": "system",
 	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "5UL3y12LS7RXWO0d",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "100%",
 	"layer_height": "0.40",
diff --git a/resources/profiles/Sovol/process/fdm_process_common.json b/resources/profiles/Sovol/process/fdm_process_common.json
index 0d9a2c994f..4f32e17501 100644
--- a/resources/profiles/Sovol/process/fdm_process_common.json
+++ b/resources/profiles/Sovol/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Tiertime.json b/resources/profiles/Tiertime.json
index 8134d621df..a7efecf420 100644
--- a/resources/profiles/Tiertime.json
+++ b/resources/profiles/Tiertime.json
@@ -1,6 +1,6 @@
 {
 	"name": "Tiertime",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Tiertime configurations",
 	"machine_model_list": [
@@ -360,14 +360,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Tiertime ABS",
-			"sub_path": "filament/Tiertime ABS.json"
-		},
-		{
-			"name": "Tiertime ABS@300HS",
-			"sub_path": "filament/Tiertime ABS@300HS.json"
-		},
 		{
 			"name": "Generic ABS @Tiertime",
 			"sub_path": "filament/Generic ABS @Tiertime.json"
@@ -377,12 +369,12 @@
 			"sub_path": "filament/Generic ABS @Tiertime 300HS.json"
 		},
 		{
-			"name": "Tiertime ASA",
-			"sub_path": "filament/Tiertime ASA.json"
+			"name": "Tiertime ABS",
+			"sub_path": "filament/Tiertime ABS.json"
 		},
 		{
-			"name": "Tiertime ASA@300HS",
-			"sub_path": "filament/Tiertime ASA@300HS.json"
+			"name": "Tiertime ABS@300HS",
+			"sub_path": "filament/Tiertime ABS@300HS.json"
 		},
 		{
 			"name": "Generic ASA @Tiertime",
@@ -392,6 +384,14 @@
 			"name": "Generic ASA @Tiertime 300HS",
 			"sub_path": "filament/Generic ASA @Tiertime 300HS.json"
 		},
+		{
+			"name": "Tiertime ASA",
+			"sub_path": "filament/Tiertime ASA.json"
+		},
+		{
+			"name": "Tiertime ASA@300HS",
+			"sub_path": "filament/Tiertime ASA@300HS.json"
+		},
 		{
 			"name": "Generic BVOH @Tiertime",
 			"sub_path": "filament/Generic BVOH @Tiertime.json"
@@ -420,6 +420,10 @@
 			"name": "Generic PA @Tiertime",
 			"sub_path": "filament/Generic PA @Tiertime.json"
 		},
+		{
+			"name": "Generic PA @Tiertime 300HS",
+			"sub_path": "filament/Generic PA @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PA-CF @Tiertime",
 			"sub_path": "filament/Generic PA-CF @Tiertime.json"
@@ -428,10 +432,6 @@
 			"name": "Generic PA-CF @Tiertime 300HS",
 			"sub_path": "filament/Generic PA-CF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PA @Tiertime 300HS",
-			"sub_path": "filament/Generic PA @Tiertime 300HS.json"
-		},
 		{
 			"name": "Tiertime PA6-CF",
 			"sub_path": "filament/Tiertime PA6-CF.json"
@@ -468,6 +468,10 @@
 			"name": "Generic PE @Tiertime",
 			"sub_path": "filament/Generic PE @Tiertime.json"
 		},
+		{
+			"name": "Generic PE @Tiertime 300HS",
+			"sub_path": "filament/Generic PE @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PE-CF @Tiertime",
 			"sub_path": "filament/Generic PE-CF @Tiertime.json"
@@ -476,14 +480,14 @@
 			"name": "Generic PE-CF @Tiertime 300HS",
 			"sub_path": "filament/Generic PE-CF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PE @Tiertime 300HS",
-			"sub_path": "filament/Generic PE @Tiertime 300HS.json"
-		},
 		{
 			"name": "Generic PETG @Tiertime",
 			"sub_path": "filament/Generic PETG @Tiertime.json"
 		},
+		{
+			"name": "Generic PETG @Tiertime 300HS",
+			"sub_path": "filament/Generic PETG @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PETG-CF @Tiertime",
 			"sub_path": "filament/Generic PETG-CF @Tiertime.json"
@@ -492,10 +496,6 @@
 			"name": "Generic PETG-CF @Tiertime 300HS",
 			"sub_path": "filament/Generic PETG-CF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PETG @Tiertime 300HS",
-			"sub_path": "filament/Generic PETG @Tiertime 300HS.json"
-		},
 		{
 			"name": "Tiertime PET-CF",
 			"sub_path": "filament/Tiertime PET-CF.json"
@@ -524,6 +524,10 @@
 			"name": "Generic PLA @Tiertime",
 			"sub_path": "filament/Generic PLA @Tiertime.json"
 		},
+		{
+			"name": "Generic PLA @Tiertime 300HS",
+			"sub_path": "filament/Generic PLA @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PLA High Speed @Tiertime",
 			"sub_path": "filament/Generic PLA High Speed @Tiertime.json"
@@ -548,10 +552,6 @@
 			"name": "Generic PLA-CF @Tiertime 300HS",
 			"sub_path": "filament/Generic PLA-CF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PLA @Tiertime 300HS",
-			"sub_path": "filament/Generic PLA @Tiertime 300HS.json"
-		},
 		{
 			"name": "Tiertime PLA",
 			"sub_path": "filament/Tiertime PLA.json"
@@ -572,6 +572,10 @@
 			"name": "Generic PP @Tiertime",
 			"sub_path": "filament/Generic PP @Tiertime.json"
 		},
+		{
+			"name": "Generic PP @Tiertime 300HS",
+			"sub_path": "filament/Generic PP @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PP-CF @Tiertime",
 			"sub_path": "filament/Generic PP-CF @Tiertime.json"
@@ -588,10 +592,6 @@
 			"name": "Generic PP-GF @Tiertime 300HS",
 			"sub_path": "filament/Generic PP-GF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PP @Tiertime 300HS",
-			"sub_path": "filament/Generic PP @Tiertime 300HS.json"
-		},
 		{
 			"name": "Generic PPA-CF @Tiertime",
 			"sub_path": "filament/Generic PPA-CF @Tiertime.json"
@@ -612,6 +612,10 @@
 			"name": "Generic PPS @Tiertime",
 			"sub_path": "filament/Generic PPS @Tiertime.json"
 		},
+		{
+			"name": "Generic PPS @Tiertime 300HS",
+			"sub_path": "filament/Generic PPS @Tiertime 300HS.json"
+		},
 		{
 			"name": "Generic PPS-CF @Tiertime",
 			"sub_path": "filament/Generic PPS-CF @Tiertime.json"
@@ -620,10 +624,6 @@
 			"name": "Generic PPS-CF @Tiertime 300HS",
 			"sub_path": "filament/Generic PPS-CF @Tiertime 300HS.json"
 		},
-		{
-			"name": "Generic PPS @Tiertime 300HS",
-			"sub_path": "filament/Generic PPS @Tiertime 300HS.json"
-		},
 		{
 			"name": "Generic PVA @Tiertime",
 			"sub_path": "filament/Generic PVA @Tiertime.json"
diff --git a/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json b/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json
index 7f937ef561..18e17f9b05 100644
--- a/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json	
+++ b/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json	
@@ -8,5 +8,5 @@
 	"bed_model": "",
 	"bed_texture": "",
 	"hotend_model": "",
-	"default_materials": "Tiertime ABS;Tiertime PLA"
+	"default_materials": "Tiertime ABS;Tiertime PLA;Tiertime PLA@300HS"
 }
diff --git a/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json b/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json
index 0ae3b64d9a..cab3e4503c 100644
--- a/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json	
+++ b/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json	
@@ -8,5 +8,5 @@
 	"bed_model": "",
 	"bed_texture": "",
 	"hotend_model": "",
-	"default_materials": "Tiertime ABS;Tiertime PLA"
+	"default_materials": "Tiertime ABS;Tiertime PLA;Tiertime PLA@300HS"
 }
diff --git a/resources/profiles/Tiertime/machine/fdm_machine_common.json b/resources/profiles/Tiertime/machine/fdm_machine_common.json
index d4a5c3be25..fbe40f97e3 100644
--- a/resources/profiles/Tiertime/machine/fdm_machine_common.json
+++ b/resources/profiles/Tiertime/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Tiertime/machine/fdm_tiertime_common.json b/resources/profiles/Tiertime/machine/fdm_tiertime_common.json
index de802f566a..66d1d1e858 100644
--- a/resources/profiles/Tiertime/machine/fdm_tiertime_common.json
+++ b/resources/profiles/Tiertime/machine/fdm_tiertime_common.json
@@ -1,9 +1,9 @@
 {
 	"type": "machine",
 	"name": "fdm_tiertime_common",
+	"inherits": "fdm_machine_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_machine_common",
 	"gcode_flavor": "klipper",
 	"machine_max_acceleration_e": [
 		"5000",
@@ -117,15 +117,12 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
 		"1"
 	],
-	"default_filament_profile": [
-		""
-	],
+	"default_filament_profile": [],
 	"default_print_profile": "0.20mm Standard @Tiertime UP400 Pro",
 	"bed_exclude_area": [
 		"0x0"
diff --git a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json
index d9ef9fe332..53b0175f21 100644
--- a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json
index 241b319114..902078336c 100644
--- a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json
index c45c24b84a..81ab969572 100644
--- a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json
index 0eadac356d..d62180d9aa 100644
--- a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json
index abccc0329b..a2248af5dc 100644
--- a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a balanced layer height for good quality and reasonable printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json
index 9e04a6e6b5..26b61969cc 100644
--- a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a balanced layer height for good quality and reasonable printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json
index 34d74cb1ad..50635f3825 100644
--- a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json
index 747872499e..95bffc096b 100644
--- a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json
index 82e011345f..38a14009e4 100644
--- a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height with optimized settings for stronger parts.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"sparse_infill_density": "25%",
 	"wall_loops": "3",
 	"compatible_printers": [
diff --git a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json
index 03d21e34d1..41c823cfa7 100644
--- a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height with optimized settings for stronger parts.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"sparse_infill_density": "25%",
 	"wall_loops": "3",
 	"compatible_printers": [
diff --git a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json
index ff33334f90..f03358440b 100644
--- a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a balanced layer height for good quality and reasonable printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json
index 8eaeb571af..ffa7019f3d 100644
--- a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a balanced layer height for good quality and reasonable printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json
index 71090fa613..fc918c5c68 100644
--- a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json
index 5e192e28ee..45772b22a5 100644
--- a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json
index d3518d81d5..f308def5b4 100644
--- a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json
index ef0ee0040d..ae3b7dc3d3 100644
--- a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json
index 1e850801ca..3e06b09767 100644
--- a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json
index 7d2afaea09..dfa351b066 100644
--- a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.6 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json
index f48c94c1b1..0e5575991d 100644
--- a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json
index c09e4c24e8..34a9b0439b 100644
--- a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json
index 4ba7a7af61..059ac43c3f 100644
--- a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP400 Pro 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json
index dab79b259d..54af1e8588 100644
--- a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json	
+++ b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Tiertime UP600 HS 0.8 nozzle"
 	]
diff --git a/resources/profiles/Tiertime/process/fdm_process_common.json b/resources/profiles/Tiertime/process/fdm_process_common.json
index ca4d181e78..26eb3a50a0 100644
--- a/resources/profiles/Tiertime/process/fdm_process_common.json
+++ b/resources/profiles/Tiertime/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "50",
diff --git a/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json b/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json
index 3b0906e2e9..6cd3aa3014 100644
--- a/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json
+++ b/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json
@@ -21,7 +21,6 @@
 	"top_surface_acceleration": "2000",
 	"initial_layer_acceleration": "500",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "90",
diff --git a/resources/profiles/Tronxy.json b/resources/profiles/Tronxy.json
index 32cf5ffa69..ac146b9850 100644
--- a/resources/profiles/Tronxy.json
+++ b/resources/profiles/Tronxy.json
@@ -1,6 +1,6 @@
 {
 	"name": "Tronxy",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Tronxy configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Tronxy/machine/fdm_machine_common.json b/resources/profiles/Tronxy/machine/fdm_machine_common.json
index fc02a60619..2ca47511d7 100644
--- a/resources/profiles/Tronxy/machine/fdm_machine_common.json
+++ b/resources/profiles/Tronxy/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Tronxy/process/fdm_process_common.json b/resources/profiles/Tronxy/process/fdm_process_common.json
index 8c2401bfb7..7f80f8bc79 100644
--- a/resources/profiles/Tronxy/process/fdm_process_common.json
+++ b/resources/profiles/Tronxy/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json
index beca23a8bb..940a5e590d 100644
--- a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json
+++ b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/TwoTrees.json b/resources/profiles/TwoTrees.json
index 3cd77c911b..5d97581ffc 100644
--- a/resources/profiles/TwoTrees.json
+++ b/resources/profiles/TwoTrees.json
@@ -1,6 +1,6 @@
 {
 	"name": "TwoTrees",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "1",
 	"description": "TwoTrees configurations",
 	"machine_model_list": [
@@ -80,13 +80,13 @@
 		}
 	],
 	"filament_list": [
-		{
-			"name": "Generic TPU 95A @TwoTrees SK1",
-			"sub_path": "filament/Generic TPU 95A @TwoTrees SK1.json"
-		},
 		{
 			"name": "Generic HS PLA @TwoTrees SK1",
 			"sub_path": "filament/Generic HS PLA @TwoTrees SK1.json"
+		},
+		{
+			"name": "Generic TPU 95A @TwoTrees SK1",
+			"sub_path": "filament/Generic TPU 95A @TwoTrees SK1.json"
 		}
 	],
 	"machine_list": [
diff --git a/resources/profiles/TwoTrees/machine/TwoTrees SK1.json b/resources/profiles/TwoTrees/machine/TwoTrees SK1.json
index 5674e7c408..a15fdfd12e 100644
--- a/resources/profiles/TwoTrees/machine/TwoTrees SK1.json	
+++ b/resources/profiles/TwoTrees/machine/TwoTrees SK1.json	
@@ -8,5 +8,5 @@
 	"bed_model": "TwoTrees SK1_buildplate_model.stl",
 	"bed_texture": "TwoTrees SK1_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic TPU 95A @TwoTrees SK1;TwoTrees Generic PETG @SK1;Generic HS PLA @TwoTrees SK1;TwoTrees Generic PLA @SK1;TwoTrees Generic PLA-CF @SK1;TwoTrees Generic PLA Matte @SK1;TwoTrees Generic PLA Silk @SK1"
+	"default_materials": "Generic TPU 95A @TwoTrees SK1;Generic PETG @System;Generic HS PLA @TwoTrees SK1;Generic PLA @System;Generic PLA-CF @System;Generic PLA Matte @System;Generic PLA Silk @System"
 }
diff --git a/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json b/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json
index a1e8548b5b..cde6900374 100644
--- a/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json	
+++ b/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json	
@@ -8,5 +8,5 @@
 	"bed_model": "SP-5_bed.stl",
 	"bed_texture": "SP-5_texture.svg",
 	"hotend_model": "",
-	"default_materials": "TwoTrees Generic ABS;TwoTrees Generic PLA;TwoTrees Generic PLA-CF;TwoTrees Generic PETG;TwoTrees Generic TPU;TwoTrees Generic ASA;TwoTrees Generic PC;TwoTrees Generic PVA;TwoTrees Generic PA;TwoTrees Generic PA-CF"
+	"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
 }
diff --git a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
index ce04b2d6e8..596334cf2e 100644
--- a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
+++ b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
@@ -118,7 +118,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE\n",
@@ -126,7 +125,7 @@
 		"1"
 	],
 	"default_filament_profile": [
-		"TwoTrees Generic PLA"
+		"Generic PLA @System"
 	],
 	"bed_exclude_area": [
 		"0x0"
diff --git a/resources/profiles/TwoTrees/machine/fdm_machine_common.json b/resources/profiles/TwoTrees/machine/fdm_machine_common.json
index fc02a60619..2ca47511d7 100644
--- a/resources/profiles/TwoTrees/machine/fdm_machine_common.json
+++ b/resources/profiles/TwoTrees/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json b/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json
index db4e413741..bcfdfdbb66 100644
--- a/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json
+++ b/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/TwoTrees/process/fdm_process_common.json b/resources/profiles/TwoTrees/process/fdm_process_common.json
index c769a23e7c..651e12c439 100644
--- a/resources/profiles/TwoTrees/process/fdm_process_common.json
+++ b/resources/profiles/TwoTrees/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/UltiMaker.json b/resources/profiles/UltiMaker.json
index da2b5442a1..52daf03cec 100644
--- a/resources/profiles/UltiMaker.json
+++ b/resources/profiles/UltiMaker.json
@@ -1,7 +1,7 @@
 {
 	"name": "UltiMaker",
 	"url": "",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "UltiMaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/UltiMaker/machine/fdm_machine_common.json b/resources/profiles/UltiMaker/machine/fdm_machine_common.json
index bcb191c0b1..035efc68ba 100644
--- a/resources/profiles/UltiMaker/machine/fdm_machine_common.json
+++ b/resources/profiles/UltiMaker/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"10000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json
index 02e0127bef..a71eed1b78 100644
--- a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json	
+++ b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "4iVomDxutraufw6B",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.12",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json
index 8c5596cfab..5026572ee8 100644
--- a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json	
+++ b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "Mo2NUdUehA5y4OwV",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.18",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json
index 7df1292a9d..bd77f960ac 100644
--- a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json	
+++ b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "dBum79P8qUSRgT90",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.25",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/UltiMaker/process/fdm_process_common.json b/resources/profiles/UltiMaker/process/fdm_process_common.json
index 99fcd508d0..45c9bcf236 100644
--- a/resources/profiles/UltiMaker/process/fdm_process_common.json
+++ b/resources/profiles/UltiMaker/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Vivedino.json b/resources/profiles/Vivedino.json
index bd7228a295..c8f6b65c3e 100644
--- a/resources/profiles/Vivedino.json
+++ b/resources/profiles/Vivedino.json
@@ -1,6 +1,6 @@
 {
 	"name": "Vivedino",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Vivedino configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Vivedino/machine/fdm_klipper_common.json b/resources/profiles/Vivedino/machine/fdm_klipper_common.json
index 23bfda64f1..3712765b66 100644
--- a/resources/profiles/Vivedino/machine/fdm_klipper_common.json
+++ b/resources/profiles/Vivedino/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"wipe": [
diff --git a/resources/profiles/Vivedino/machine/fdm_machine_common.json b/resources/profiles/Vivedino/machine/fdm_machine_common.json
index 3c5f92be16..7b8f13e442 100644
--- a/resources/profiles/Vivedino/machine/fdm_machine_common.json
+++ b/resources/profiles/Vivedino/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Vivedino/machine/fdm_rrf_common.json b/resources/profiles/Vivedino/machine/fdm_rrf_common.json
index b639ec3fd7..08fd49e3ad 100644
--- a/resources/profiles/Vivedino/machine/fdm_rrf_common.json
+++ b/resources/profiles/Vivedino/machine/fdm_rrf_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE\n",
diff --git a/resources/profiles/Vivedino/process/fdm_process_common.json b/resources/profiles/Vivedino/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Vivedino/process/fdm_process_common.json
+++ b/resources/profiles/Vivedino/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json
index 9736bc5c0d..a10193f25a 100644
--- a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json
+++ b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Volumic.json b/resources/profiles/Volumic.json
index af7aa294bc..7923f2d92f 100644
--- a/resources/profiles/Volumic.json
+++ b/resources/profiles/Volumic.json
@@ -1,6 +1,6 @@
 {
 	"name": "Volumic",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "1",
 	"description": "VOLUMIC configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Volumic/machine/EXO42 IDRE.json b/resources/profiles/Volumic/machine/EXO42 IDRE.json
index ad6ad5ba44..185924e798 100644
--- a/resources/profiles/Volumic/machine/EXO42 IDRE.json	
+++ b/resources/profiles/Volumic/machine/EXO42 IDRE.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "EXO42_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/EXO42 Performance.json b/resources/profiles/Volumic/machine/EXO42 Performance.json
index 14979aca7c..0ae9738e0e 100644
--- a/resources/profiles/Volumic/machine/EXO42 Performance.json	
+++ b/resources/profiles/Volumic/machine/EXO42 Performance.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "EXO42_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/EXO65 IDRE.json b/resources/profiles/Volumic/machine/EXO65 IDRE.json
index 4d6060a134..3532466902 100644
--- a/resources/profiles/Volumic/machine/EXO65 IDRE.json	
+++ b/resources/profiles/Volumic/machine/EXO65 IDRE.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "EXO65_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/EXO65 Performance.json b/resources/profiles/Volumic/machine/EXO65 Performance.json
index c34582d5f0..4e1ffaa2b0 100644
--- a/resources/profiles/Volumic/machine/EXO65 Performance.json	
+++ b/resources/profiles/Volumic/machine/EXO65 Performance.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "EXO65_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/SH65 IDRE.json b/resources/profiles/Volumic/machine/SH65 IDRE.json
index ee9d97b97f..79c2fee79c 100644
--- a/resources/profiles/Volumic/machine/SH65 IDRE.json	
+++ b/resources/profiles/Volumic/machine/SH65 IDRE.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "SH65_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/SH65 Performance.json b/resources/profiles/Volumic/machine/SH65 Performance.json
index b5e4eb2bf0..4091b52b93 100644
--- a/resources/profiles/Volumic/machine/SH65 Performance.json	
+++ b/resources/profiles/Volumic/machine/SH65 Performance.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "SH65_bed.STL",
-	"default_materials": "Volumic PLA Ultra"
+	"default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/VS30SC2 Performance.json b/resources/profiles/Volumic/machine/VS30SC2 Performance.json
index 93f1ac8c28..74fa8c1fc8 100644
--- a/resources/profiles/Volumic/machine/VS30SC2 Performance.json	
+++ b/resources/profiles/Volumic/machine/VS30SC2 Performance.json	
@@ -6,5 +6,5 @@
 	"machine_tech": "FFF",
 	"family": "VOLUMIC",
 	"bed_model": "VS30U_bed.STL",
-	"default_materials": "Volumic UNIVERSAL Ultra"
+	"default_materials": "Volumic UNIVERSAL Ultra;Volumic PLA Ultra (Performance)"
 }
diff --git a/resources/profiles/Volumic/machine/fdm_volumic_common.json b/resources/profiles/Volumic/machine/fdm_volumic_common.json
index a0f8a16b48..59a9facfde 100644
--- a/resources/profiles/Volumic/machine/fdm_volumic_common.json
+++ b/resources/profiles/Volumic/machine/fdm_volumic_common.json
@@ -31,7 +31,6 @@
 	"retraction_speed": [
 		"30"
 	],
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"0",
 		"0"
diff --git a/resources/profiles/Volumic/process/fdm_process_volumic_common.json b/resources/profiles/Volumic/process/fdm_process_volumic_common.json
index 52dfcb1eb8..5a7ff0840a 100644
--- a/resources/profiles/Volumic/process/fdm_process_volumic_common.json
+++ b/resources/profiles/Volumic/process/fdm_process_volumic_common.json
@@ -5,7 +5,6 @@
 	"instantiation": "false",
 	"precise_outer_wall": "1",
 	"enable_overhang_speed": "1",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"max_travel_detour_distance": "0",
 	"extra_perimeters_on_overhangs": "1",
diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json
index 74df754a9d..9f6f785ad7 100644
--- a/resources/profiles/Voron.json
+++ b/resources/profiles/Voron.json
@@ -1,6 +1,6 @@
 {
 	"name": "Voron",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Voron configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Voron/machine/fdm_klipper_common.json b/resources/profiles/Voron/machine/fdm_klipper_common.json
index b4ffd1a4bb..4eedd71412 100644
--- a/resources/profiles/Voron/machine/fdm_klipper_common.json
+++ b/resources/profiles/Voron/machine/fdm_klipper_common.json
@@ -117,7 +117,6 @@
 		"30"
 	],
 	"z_hop_types": "Slope Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE",
diff --git a/resources/profiles/Voron/machine/fdm_machine_common.json b/resources/profiles/Voron/machine/fdm_machine_common.json
index 921560eee8..f7f0f31d7e 100644
--- a/resources/profiles/Voron/machine/fdm_machine_common.json
+++ b/resources/profiles/Voron/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Voron/process/fdm_process_common.json b/resources/profiles/Voron/process/fdm_process_common.json
index d8955e2bfb..c118c4a2c9 100644
--- a/resources/profiles/Voron/process/fdm_process_common.json
+++ b/resources/profiles/Voron/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Voron/process/fdm_process_voron_common.json b/resources/profiles/Voron/process/fdm_process_voron_common.json
index f5ad2128d0..d06e0e7e9a 100644
--- a/resources/profiles/Voron/process/fdm_process_voron_common.json
+++ b/resources/profiles/Voron/process/fdm_process_voron_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json
index 758b9d0cd3..6d1fa00061 100644
--- a/resources/profiles/Voxelab.json
+++ b/resources/profiles/Voxelab.json
@@ -1,7 +1,7 @@
 {
 	"name": "Voxelab",
 	"url": "",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Voxelab configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Voxelab/machine/fdm_machine_common.json b/resources/profiles/Voxelab/machine/fdm_machine_common.json
index b4aada4829..a2c7c89e17 100644
--- a/resources/profiles/Voxelab/machine/fdm_machine_common.json
+++ b/resources/profiles/Voxelab/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
 	"machine_start_gcode": "",
diff --git a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
index f595e8b16b..29a42d75ec 100644
--- a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json	
+++ b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "xCSbqEmBX0IB51ZS",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.16",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
index 97d049eb14..ec6f76816d 100644
--- a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json	
+++ b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json	
@@ -5,7 +5,6 @@
 	"from": "system",
 	"setting_id": "DbIfKn2knpsOQT7H",
 	"instantiation": "true",
-	"adaptive_layer_height": "1",
 	"reduce_crossing_wall": "0",
 	"layer_height": "0.2",
 	"max_travel_detour_distance": "0",
diff --git a/resources/profiles/Voxelab/process/fdm_process_common.json b/resources/profiles/Voxelab/process/fdm_process_common.json
index 99fcd508d0..45c9bcf236 100644
--- a/resources/profiles/Voxelab/process/fdm_process_common.json
+++ b/resources/profiles/Voxelab/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Vzbot.json b/resources/profiles/Vzbot.json
index bcefdaf26c..a64b4807e8 100644
--- a/resources/profiles/Vzbot.json
+++ b/resources/profiles/Vzbot.json
@@ -1,6 +1,6 @@
 {
 	"name": "Vzbot",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Vzbot configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Vzbot/machine/fdm_klipper_common.json b/resources/profiles/Vzbot/machine/fdm_klipper_common.json
index 97e546f272..26bac7d0f3 100644
--- a/resources/profiles/Vzbot/machine/fdm_klipper_common.json
+++ b/resources/profiles/Vzbot/machine/fdm_klipper_common.json
@@ -116,8 +116,6 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"z_lift_type": "NormalLift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "PAUSE\n",
diff --git a/resources/profiles/Vzbot/machine/fdm_machine_common.json b/resources/profiles/Vzbot/machine/fdm_machine_common.json
index 7c66fd5988..407e718f94 100644
--- a/resources/profiles/Vzbot/machine/fdm_machine_common.json
+++ b/resources/profiles/Vzbot/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json
index dc8a25695d..de407b2612 100644
--- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json
+++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json
index 110151e4f8..f5b58f9df2 100644
--- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json
+++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common_0.5_nozzle",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json
index 7375f8d03f..3d0a6667be 100644
--- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json
+++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common_0.6_nozzle",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/Vzbot/process/fdm_process_common.json b/resources/profiles/Vzbot/process/fdm_process_common.json
index d8955e2bfb..c118c4a2c9 100644
--- a/resources/profiles/Vzbot/process/fdm_process_common.json
+++ b/resources/profiles/Vzbot/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json
index d07534d8b5..30b508b5ad 100644
--- a/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json
+++ b/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common_0.5_nozzle",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "150",
diff --git a/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json
index 8d0c3ec113..f61615dd8c 100644
--- a/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json
+++ b/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common_0.6_nozzle",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "150",
diff --git a/resources/profiles/WEMAKE3D.json b/resources/profiles/WEMAKE3D.json
index 399d342641..feeeba132b 100644
--- a/resources/profiles/WEMAKE3D.json
+++ b/resources/profiles/WEMAKE3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "WEMAKE3D",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "WEMAKE3D configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/WEMAKE3D/process/fdm_process_common.json b/resources/profiles/WEMAKE3D/process/fdm_process_common.json
index 3708fca48b..1dc5f32da4 100644
--- a/resources/profiles/WEMAKE3D/process/fdm_process_common.json
+++ b/resources/profiles/WEMAKE3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -92,7 +91,6 @@
 	"support_top_z_distance": "0.275",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/Wanhao France.json b/resources/profiles/Wanhao France.json
index ce18d5c5d0..9087899761 100644
--- a/resources/profiles/Wanhao France.json	
+++ b/resources/profiles/Wanhao France.json	
@@ -1,6 +1,6 @@
 {
 	"name": "Wanhao France",
-	"version": "02.04.00.03",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Wanhao France D12 configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Wanhao France/filament/YUMI PETG.json b/resources/profiles/Wanhao France/filament/YUMI PETG.json
index 9d1bf0288a..7495416e39 100644
--- a/resources/profiles/Wanhao France/filament/YUMI PETG.json	
+++ b/resources/profiles/Wanhao France/filament/YUMI PETG.json	
@@ -108,9 +108,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"42"
-	],
 	"filament_loading_speed": [
 		"0"
 	],
@@ -180,9 +177,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"0"
 	],
diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json
index b15cecc588..366c7b8ad8 100644
--- a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json	
+++ b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json	
@@ -8,7 +8,7 @@
 	"printer_model": "D12 230 PRO SMARTPAD DIRECT",
 	"default_print_profile": "0.20mm Standard @Wanhao-D12-230",
 	"default_filament_profile": [
-		"Direct Drive"
+		"YUMI PLA Direct Drive"
 	],
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json
index 88fc2fa519..f7308b5838 100644
--- a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json	
+++ b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json	
@@ -26,7 +26,7 @@
 	"auxiliary_fan": "0",
 	"printer_variant": "0.4",
 	"default_filament_profile": [
-		"Direct Drive"
+		"YUMI PLA Direct Drive"
 	],
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json
index 5795ec87f1..81e3bfe34b 100644
--- a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json	
+++ b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json	
@@ -22,7 +22,7 @@
 	"auxiliary_fan": "0",
 	"printer_variant": "0.4",
 	"default_filament_profile": [
-		"Direct Drive"
+		"YUMI PLA Direct Drive"
 	],
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json
index d49638c216..916c24cef6 100644
--- a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json	
+++ b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json	
@@ -22,7 +22,7 @@
 	"auxiliary_fan": "0",
 	"printer_variant": "0.4",
 	"default_filament_profile": [
-		"Direct Drive"
+		"YUMI PLA Direct Drive"
 	],
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json
index 4b41bbee33..d79e811b91 100644
--- a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json	
+++ b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json	
@@ -22,7 +22,7 @@
 	"auxiliary_fan": "0",
 	"printer_variant": "0.4",
 	"default_filament_profile": [
-		"Direct Drive"
+		"YUMI PLA Direct Drive"
 	],
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0",
 	"change_filament_gcode": "M600",
diff --git a/resources/profiles/Wanhao France/machine/fdm_machine_common.json b/resources/profiles/Wanhao France/machine/fdm_machine_common.json
index 38881092e1..e72b821fa1 100644
--- a/resources/profiles/Wanhao France/machine/fdm_machine_common.json	
+++ b/resources/profiles/Wanhao France/machine/fdm_machine_common.json	
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"support_chamber_temp_control": "0",
 	"support_air_filtration": "0",
 	"machine_max_acceleration_e": [
diff --git a/resources/profiles/Wanhao France/process/fdm_process_common.json b/resources/profiles/Wanhao France/process/fdm_process_common.json
index fb15ba32dd..ce18f8a69a 100644
--- a/resources/profiles/Wanhao France/process/fdm_process_common.json	
+++ b/resources/profiles/Wanhao France/process/fdm_process_common.json	
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Wanhao.json b/resources/profiles/Wanhao.json
index d534a75d8b..81afe3eff5 100644
--- a/resources/profiles/Wanhao.json
+++ b/resources/profiles/Wanhao.json
@@ -1,6 +1,6 @@
 {
 	"name": "Wanhao",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Wanhao configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Wanhao/machine/fdm_machine_common.json b/resources/profiles/Wanhao/machine/fdm_machine_common.json
index 20d52ddf93..654d066697 100644
--- a/resources/profiles/Wanhao/machine/fdm_machine_common.json
+++ b/resources/profiles/Wanhao/machine/fdm_machine_common.json
@@ -14,7 +14,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -110,7 +109,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
 	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
 	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
diff --git a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
index 90c105b44d..0b8e77b013 100644
--- a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
+++ b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
@@ -116,7 +116,6 @@
 	"deretraction_speed": [
 		"40"
 	],
-	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25 ;pause print",
diff --git a/resources/profiles/Wanhao/process/fdm_process_common.json b/resources/profiles/Wanhao/process/fdm_process_common.json
index a3fe34bea4..d7da41458a 100644
--- a/resources/profiles/Wanhao/process/fdm_process_common.json
+++ b/resources/profiles/Wanhao/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
diff --git a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json
index f3ec727575..d8b026f624 100644
--- a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json
+++ b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json
@@ -4,7 +4,6 @@
 	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
diff --git a/resources/profiles/WonderMaker.json b/resources/profiles/WonderMaker.json
index 0eeffdb045..35a1b5c8fa 100755
--- a/resources/profiles/WonderMaker.json
+++ b/resources/profiles/WonderMaker.json
@@ -1,7 +1,7 @@
 {
 	"name": "WonderMaker",
 	"url": "",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "WonderMaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/WonderMaker/machine/fdm_machine_common.json b/resources/profiles/WonderMaker/machine/fdm_machine_common.json
index 6e812d4a1a..3fc194fe33 100755
--- a/resources/profiles/WonderMaker/machine/fdm_machine_common.json
+++ b/resources/profiles/WonderMaker/machine/fdm_machine_common.json
@@ -20,7 +20,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "klipper",
-	"silent_mode": "0",
 	"long_retractions_when_cut": [
 		"0"
 	],
diff --git a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json
index 0b113f9f01..231a6d61b5 100755
--- a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.2 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json
index 27b1b48eca..400c52194c 100755
--- a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json
index 7b393336df..840a438931 100755
--- a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "S9bZmEeAYQKyQW6v",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json
index 1f4a7fed3b..51c704a726 100755
--- a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "MDzBBVuT9evcSDUx",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json
index 4713c9c6ef..1e32bc43f8 100755
--- a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.2 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json
index 422b17646b..b2e1739b53 100755
--- a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json
index 1c298bcab0..d8db56e028 100755
--- a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.2 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json
index eeddb0e9f8..f83e6254f7 100755
--- a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json
index a1275857de..954e3ae8ed 100755
--- a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.2 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json
index f9a1aedca2..7f4a704c05 100755
--- a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json
index f270e60327..a5b2aa0d55 100755
--- a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "bSzDzVfhYbOfsvrm",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json
index 1e0fd84bfd..cb96ef20a9 100755
--- a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "RNjDYmMvSgIjaGUB",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json
index 5c24551f11..9fb20debdd 100755
--- a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.2 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json
index d10132d333..3eb2a453ff 100755
--- a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json
index 49e6dee9e5..33adc94625 100755
--- a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "CJRH0KVoqMhAKf7b",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json
index d6837e19f2..fef4b0de51 100755
--- a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "Gq8p7VLck61epJRQ",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json
index 5ac88d7e8c..97c2009db6 100755
--- a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.6 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json
index b3c7bc33da..82699880de 100755
--- a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json
index 88320865b2..0655aa9194 100755
--- a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "5UnvGUSJUfxiX3Oh",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json
index da46084462..fcfeabbcd9 100755
--- a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "nalI7H3j0Qhs6qig",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json
index 0c33e1a7f1..0463b259bd 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "hSxtB6qUwhhTkAtv",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json
index f0b4ba5369..f56e519bef 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "ptoXhTDH4PGy8H4w",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json
index 0808b7056e..764c717695 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.8 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json
index 433cc33740..70a708ba46 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json
index ec5029b95a..b21d155153 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.6 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json
index e31b67eb36..f9667fface 100755
--- a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json
index 52b01c70c4..1785ba49f5 100755
--- a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json	
+++ b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json	
@@ -6,8 +6,6 @@
 	"setting_id": "sGfFFynEl5ot8fzq",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json
index 3c61b187bf..e598576f17 100755
--- a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json	
+++ b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json	
@@ -6,8 +6,6 @@
 	"setting_id": "cns9NtEbZzQRnUOq",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.4 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json
index 3818aa0c7f..45bc88f11c 100755
--- a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.6 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json
index 35257448ee..749427287a 100755
--- a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json
index 01040bc97d..5117bec5c7 100755
--- a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.8 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json
index 9387e0bd31..650f2b16bd 100755
--- a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json
index 32e8d231a0..5da20d13fe 100755
--- a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.6 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json
index aec25c67cd..c5d787805f 100755
--- a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json
index 9e040a39f7..178371f567 100755
--- a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.8 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json
index 1e5fbadf5a..b05bad45c8 100755
--- a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json
index 23b41cff0f..3de31e9320 100755
--- a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.6 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json
index 0499dd48ff..cfce9cde18 100755
--- a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json
index b2d1696c4f..37089b0318 100755
--- a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.8 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json
index 526dd3db7d..93311ca1d2 100755
--- a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json
index 399b583429..5ffbf26b77 100755
--- a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"WonderMaker ZR 0.8 nozzle"
 	]
diff --git a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json
index 4708bbfed9..f5b2d333a9 100755
--- a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json	
+++ b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"preheat_time": "30",
 	"standby_temperature_delta": "-80",
diff --git a/resources/profiles/WonderMaker/process/fdm_process_common.json b/resources/profiles/WonderMaker/process/fdm_process_common.json
index ba67f8406c..a9d67585ce 100755
--- a/resources/profiles/WonderMaker/process/fdm_process_common.json
+++ b/resources/profiles/WonderMaker/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
@@ -69,7 +68,5 @@
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"compatible_printers": [],
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "19",
 	"scarf_angle_threshold": "155"
 }
diff --git a/resources/profiles/WonderMaker/process/fdm_process_wm_common.json b/resources/profiles/WonderMaker/process/fdm_process_wm_common.json
index 3b7fb2ba74..72e8a815a2 100755
--- a/resources/profiles/WonderMaker/process/fdm_process_wm_common.json
+++ b/resources/profiles/WonderMaker/process/fdm_process_wm_common.json
@@ -20,7 +20,6 @@
 	"inner_wall_acceleration": "8000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Z-Bolt.json b/resources/profiles/Z-Bolt.json
index aa092cc8b2..7c16785c62 100644
--- a/resources/profiles/Z-Bolt.json
+++ b/resources/profiles/Z-Bolt.json
@@ -1,7 +1,7 @@
 {
 	"name": "Z-Bolt",
 	"url": "",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Z-Bolt configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Z-Bolt/machine/fdm_machine_common.json b/resources/profiles/Z-Bolt/machine/fdm_machine_common.json
index 2a5cddb2f2..e9350c430c 100644
--- a/resources/profiles/Z-Bolt/machine/fdm_machine_common.json
+++ b/resources/profiles/Z-Bolt/machine/fdm_machine_common.json
@@ -19,7 +19,6 @@
 		"0x0"
 	],
 	"gcode_flavor": "marlin",
-	"silent_mode": "0",
 	"machine_max_acceleration_e": [
 		"5000"
 	],
@@ -111,7 +110,6 @@
 	"wipe": [
 		"1"
 	],
-	"z_lift_type": "NormalLift",
 	"default_print_profile": "",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_BEFORE_LAYER_CHANGE",
 	"layer_change_gcode": "_AFTER_LAYER_CHANGE Z={layer_z}",
diff --git a/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json
index 52e9dae00d..fa724bd573 100644
--- a/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "aQbSyiYUXanu2sjX",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json
index c71a6ae5ef..8535207de5 100644
--- a/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json	
@@ -16,8 +16,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "150",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json
index 74108d7eb6..4cd386a5a9 100644
--- a/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "FXUuYzz6QKb2B8NO",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json
index b7faeba25f..f79c91e16c 100644
--- a/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json	
@@ -16,8 +16,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "180",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json
index 06b6c23e34..72b2a62857 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json	
@@ -16,8 +16,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "200",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json
index e826d762af..036b2ae886 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json	
@@ -12,8 +12,6 @@
 	"top_surface_speed": "100",
 	"default_acceleration": "5000",
 	"outer_wall_acceleration": "2500",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json
index ccd2dbcd33..7f375e45f5 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "TrwuaRthXrp9Aqc2",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json
index 62e3e30a66..831f6dabdd 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json
index a2651b61b8..4d70dc3505 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json
index 7dceacb4d0..058a3a870c 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json
index db42d946e5..977400fb28 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json
index 053a3b9593..15405feb72 100644
--- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json
index d926fede96..df9e3494fd 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json	
@@ -13,8 +13,6 @@
 	"top_surface_speed": "100",
 	"default_acceleration": "5000",
 	"outer_wall_acceleration": "2500",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json
index e10958dbfe..740f23349e 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "jSA9QDV6RfL4eb5X",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json
index 92e55765eb..b5ccd2ba7a 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json
index 97f40201d2..43f9ea536b 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json
index 6366647a6f..641a53bd80 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json
index 7b31b4afbb..2843e854cb 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json
index 27808d012c..37ddf5b15d 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json
index 177a7d1f87..ab0077d73a 100644
--- a/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json	
@@ -9,8 +9,6 @@
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
 	"outer_wall_speed": "60",
 	"sparse_infill_density": "25%",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"wall_loops": "6",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json
index 358ae59e06..9505267903 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "L1bdHzIO1OKLDT3Q",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json
index 5ef55f74f5..627d9ea582 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json
index dad1890533..f16cccf104 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json
index fce0f0dc27..e646fce399 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json
index 1f84b54785..9d8d457f31 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json
index fe57ad2149..b304c7d305 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json
index c1a1f9d3ba..ad2726dc6a 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.8 nozzle",
 		"Z-Bolt S400 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json
index e12643bd2a..5780b16d09 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json
index 962ba3a32a..f4f133b107 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.8 nozzle",
 		"Z-Bolt S600 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json
index 8ba32b08b9..9ea1286a91 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json
index 7ff2da7c2d..309d3ea585 100644
--- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.8 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json
index f442650a69..3304756c78 100644
--- a/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json	
@@ -7,8 +7,6 @@
 	"setting_id": "U6WOuHSZoT8XksE5",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.4 nozzle",
 		"Z-Bolt S300 Dual 0.4 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json
index 006f1c4d0a..0d00b00d51 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json
index 5bc3a498b3..b040598949 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json
index 6984af380f..611ec1a723 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json
index 6df85166a4..34e6b16951 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json
index 5add162efc..219a9150dc 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json
index 8fea281789..14c5183ddb 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json	
@@ -10,8 +10,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json
index 127c42f19c..aed5e54271 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json	
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json
index d03ac505d5..67525a87b8 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json	
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json
index 14dcc0f4ee..01745da5e5 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json	
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json
index 9dd0eb0728..a03c875c2a 100644
--- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json	
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json
index 7a8f7ea2e9..8587bb3e67 100644
--- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json
index e639b6b277..f36ba77e24 100644
--- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json
index dc7e570d65..0ad0f9371a 100644
--- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.8 nozzle",
 		"Z-Bolt S400 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json
index e7a77f55a1..f449cfd705 100644
--- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.8 nozzle",
 		"Z-Bolt S600 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json
index 7fe7708930..7732bb1c18 100644
--- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.8 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json
index 236979d112..8f5029d11d 100644
--- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json
index 32ec85d70d..d782d7d919 100644
--- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json
index 5f0e926991..a196f43fea 100644
--- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json
index e58fecfbe1..42f2d6defc 100644
--- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json
index 3d2af55bd0..e06c917d53 100644
--- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json
index b8c39f25b3..652815aeb7 100644
--- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json
index bacba10332..b00f4442af 100644
--- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json
index 1234ff53d8..103dd99e63 100644
--- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.8 nozzle",
 		"Z-Bolt S400 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json
index 6b05db5f96..30f9ef5ff1 100644
--- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.8 nozzle",
 		"Z-Bolt S600 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json
index 0d0475e7d9..57a59eb902 100644
--- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.8 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json
index ccaab4f070..b64b0028f9 100644
--- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json
index 9a5e4b5aa5..87f866d958 100644
--- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.6 nozzle",
 		"Z-Bolt S300 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json
index c84e8895c0..c82284df22 100644
--- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.6 nozzle",
 		"Z-Bolt S400 Dual 0.6 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json
index 20f0a155e3..110605f717 100644
--- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.6 nozzle",
 		"Z-Bolt S600 Dual 0.6 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json
index ed319c209f..c042b0bea2 100644
--- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.6 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json
index b26b749a81..c67e1d42fa 100644
--- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json	
@@ -8,8 +8,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json
index 42ddc4ff8d..c1d19c312e 100644
--- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S300 0.8 nozzle",
 		"Z-Bolt S300 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json
index 916e7a28e6..efed7665fe 100644
--- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S400 0.8 nozzle",
 		"Z-Bolt S400 Dual 0.8 nozzle"
diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json
index 32dc534606..49092fb651 100644
--- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S600 0.8 nozzle",
 		"Z-Bolt S600 Dual 0.8 nozzle",
diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json
index 21c660ae18..cdea08b5f2 100644
--- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json	
+++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json	
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Z-Bolt S800 Dual 0.8 nozzle"
 	]
diff --git a/resources/profiles/Z-Bolt/process/fdm_process_common.json b/resources/profiles/Z-Bolt/process/fdm_process_common.json
index 4859096b3d..a685416c9b 100644
--- a/resources/profiles/Z-Bolt/process/fdm_process_common.json
+++ b/resources/profiles/Z-Bolt/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"bridge_flow": "0.95",
 	"bridge_no_support": "0",
 	"bridge_speed": "25",
@@ -41,7 +40,6 @@
 	"internal_solid_infill_speed": "40",
 	"outer_wall_line_width": "0.42",
 	"outer_wall_speed": "120",
-	"overhang_totally_speed": "19",
 	"print_sequence": "by layer",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
@@ -70,6 +68,5 @@
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"compatible_printers": [],
-	"smooth_coefficient": "80",
 	"scarf_angle_threshold": "155"
 }
diff --git a/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json b/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json
index 627ed0f9f9..dd205e9370 100644
--- a/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json
+++ b/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/blacklist.json b/resources/profiles/blacklist.json
index 2c036613fc..6c16b5ae5d 100644
--- a/resources/profiles/blacklist.json
+++ b/resources/profiles/blacklist.json
@@ -4,9 +4,5 @@
 	],
 	"process": [
 		"GP008"
-	],
-	"machine_model_list": [],
-	"process_list": [],
-	"filament_list": [],
-	"machine_list": []
+	]
 }
diff --git a/resources/profiles/iQ.json b/resources/profiles/iQ.json
index 050a0a2eb2..1148b112f3 100644
--- a/resources/profiles/iQ.json
+++ b/resources/profiles/iQ.json
@@ -1,6 +1,6 @@
 {
 	"name": "innovatiQ",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "1",
 	"description": "innovatiQ configuration",
 	"machine_model_list": [
@@ -56,6 +56,14 @@
 			"name": "fdm_process_tiq_common",
 			"sub_path": "process/fdm_process_tiq_common.json"
 		},
+		{
+			"name": "0.15mm Standard @iQ TiQ2 (0.25 Nozzle)",
+			"sub_path": "process/0.15mm Standard @iQ TiQ2 (0.25 Nozzle).json"
+		},
+		{
+			"name": "0.15mm Standard @iQ TiQ8 (0.25 Nozzle)",
+			"sub_path": "process/0.15mm Standard @iQ TiQ8 (0.25 Nozzle).json"
+		},
 		{
 			"name": "0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle)",
 			"sub_path": "process/0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle).json"
@@ -76,26 +84,18 @@
 			"name": "0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle)",
 			"sub_path": "process/0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle).json"
 		},
-		{
-			"name": "0.15mm Standard @iQ TiQ2 (0.25 Nozzle)",
-			"sub_path": "process/0.15mm Standard @iQ TiQ2 (0.25 Nozzle).json"
-		},
 		{
 			"name": "0.30mm Standard @iQ TiQ2 (0.6 Nozzle)",
 			"sub_path": "process/0.30mm Standard @iQ TiQ2 (0.6 Nozzle).json"
 		},
-		{
-			"name": "0.40mm Standard @iQ TiQ2 (0.8 Nozzle)",
-			"sub_path": "process/0.40mm Standard @iQ TiQ2 (0.8 Nozzle).json"
-		},
-		{
-			"name": "0.15mm Standard @iQ TiQ8 (0.25 Nozzle)",
-			"sub_path": "process/0.15mm Standard @iQ TiQ8 (0.25 Nozzle).json"
-		},
 		{
 			"name": "0.30mm Standard @iQ TiQ8 (0.6 Nozzle)",
 			"sub_path": "process/0.30mm Standard @iQ TiQ8 (0.6 Nozzle).json"
 		},
+		{
+			"name": "0.40mm Standard @iQ TiQ2 (0.8 Nozzle)",
+			"sub_path": "process/0.40mm Standard @iQ TiQ2 (0.8 Nozzle).json"
+		},
 		{
 			"name": "0.40mm Standard @iQ TiQ8 (0.8 Nozzle)",
 			"sub_path": "process/0.40mm Standard @iQ TiQ8 (0.8 Nozzle).json"
diff --git a/resources/profiles/iQ/filament/fdm_filament_common.json b/resources/profiles/iQ/filament/fdm_filament_common.json
index 4bf9b7986c..5d8d059f91 100644
--- a/resources/profiles/iQ/filament/fdm_filament_common.json
+++ b/resources/profiles/iQ/filament/fdm_filament_common.json
@@ -84,9 +84,6 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_load_time": [
-		"0"
-	],
 	"filament_loading_speed": [
 		"28"
 	],
@@ -153,9 +150,6 @@
 	"filament_toolchange_delay": [
 		"0"
 	],
-	"filament_unload_time": [
-		"0"
-	],
 	"filament_unloading_speed": [
 		"90"
 	],
diff --git a/resources/profiles/iQ/machine/TiQ2.json b/resources/profiles/iQ/machine/TiQ2.json
index 36c04edf6e..3a24cd308a 100644
--- a/resources/profiles/iQ/machine/TiQ2.json
+++ b/resources/profiles/iQ/machine/TiQ2.json
@@ -7,5 +7,5 @@
 	"family": "TiQ",
 	"bed_model": "TiQ2.stl",
 	"bed_texture": "TiQ2_texture.svg",
-	"default_materials": "Fiberthree PACF Pro P1 @iQ TiQ2 0.4 Nozzle"
+	"default_materials": "Fiberthree PACF Pro P1 @iQ TiQ2 0.4 Nozzle;Generic PLA @System"
 }
diff --git a/resources/profiles/iQ/machine/TiQ8.json b/resources/profiles/iQ/machine/TiQ8.json
index 21d9c23413..0243125926 100644
--- a/resources/profiles/iQ/machine/TiQ8.json
+++ b/resources/profiles/iQ/machine/TiQ8.json
@@ -7,5 +7,5 @@
 	"family": "TiQ",
 	"bed_model": "TiQ8.stl",
 	"bed_texture": "TiQ8_texture.svg",
-	"default_materials": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle"
+	"default_materials": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle;Generic PLA @System"
 }
diff --git a/resources/profiles/iQ/machine/fdm_tiq_common.json b/resources/profiles/iQ/machine/fdm_tiq_common.json
index 2f1b6b8415..42fda68609 100644
--- a/resources/profiles/iQ/machine/fdm_tiq_common.json
+++ b/resources/profiles/iQ/machine/fdm_tiq_common.json
@@ -176,7 +176,6 @@
 		"30"
 	],
 	"scan_first_layer": "0",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"support_air_filtration": "1",
 	"support_chamber_temp_control": "1",
diff --git a/resources/profiles/iQ/process/fdm_process_tiq_common.json b/resources/profiles/iQ/process/fdm_process_tiq_common.json
index 3214a995d5..d89538b598 100644
--- a/resources/profiles/iQ/process/fdm_process_tiq_common.json
+++ b/resources/profiles/iQ/process/fdm_process_tiq_common.json
@@ -30,7 +30,6 @@
 	"standby_temperature_delta": "-40",
 	"preheat_time": "30",
 	"preheat_steps": "1",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonic",
@@ -100,7 +99,6 @@
 	"support_object_xy_distance": "0.35",
 	"tree_support_branch_angle": "30",
 	"tree_support_wall_count": "0",
-	"tree_support_with_infill": "0",
 	"detect_thin_wall": "0",
 	"top_surface_pattern": "monotonicline",
 	"top_shell_thickness": "0.8",
diff --git a/resources/profiles/re3D.json b/resources/profiles/re3D.json
index 7a66cb4ce1..da34373d47 100644
--- a/resources/profiles/re3D.json
+++ b/resources/profiles/re3D.json
@@ -1,199 +1,199 @@
 {
-    "name":  "re3D",
-    "url":  "",
-    "version":  "03.00.10",
-    "force_update":  "0",
-    "description":  "re3D configurations",
-    "machine_model_list":  [
-                               {
-                                   "name":  "re3D Gigabot 4",
-                                   "sub_path":  "machine/re3D Gigabot 4.json"
-                               },
-                               {
-                                   "name":  "re3D Gigabot 4 XLT",
-                                   "sub_path":  "machine/re3D Gigabot 4 XLT.json"
-                               },
-                               {
-                                   "name":  "re3D GigabotX 2",
-                                   "sub_path":  "machine/re3D GigabotX 2.json"
-                               },
-                               {
-                                   "name":  "re3D GigabotX 2 XLT",
-                                   "sub_path":  "machine/re3D GigabotX 2 XLT.json"
-                               },
-                               {
-                                   "name":  "re3D Terabot 4",
-                                   "sub_path":  "machine/re3D Terabot 4.json"
-                               },
-                               {
-                                   "name":  "re3D TerabotX 2",
-                                   "sub_path":  "machine/re3D TerabotX 2.json"
-                               }
-                           ],
-    "process_list":  [
-                         {
-                             "name":  "fdm_process_common",
-                             "sub_path":  "process/fdm_process_common.json"
-                         },
-                         {
-                             "name":  "fdm_process_re3D_common",
-                             "sub_path":  "process/fdm_process_re3D_common.json"
-                         },
-                         {
-                             "name":  "fgf_process_re3D_common",
-                             "sub_path":  "process/fgf_process_re3D_common.json"
-                         },
-                         {
-                             "name":  "0.2 Fine",
-                             "sub_path":  "process/0.2mm Fine @re3D fdm 0.4.json"
-                         },
-                         {
-                             "name":  "0.26 Standard",
-                             "sub_path":  "process/0.26mm Standard @re3D fdm 0.4.json"
-                         },
-                         {
-                             "name":  "0.32 Draft",
-                             "sub_path":  "process/0.32mm Draft @re3D fdm 0.4.json"
-                         },
-                         {
-                             "name":  "0.3 Fine",
-                             "sub_path":  "process/0.3mm Fine @re3D fdm 0.8.json"
-                         },
-                         {
-                             "name":  "0.4 Standard",
-                             "sub_path":  "process/0.4mm Draft @re3D fdm 0.8.json"
-                         },
-                         {
-                             "name":  "1.0 Standard",
-                             "sub_path":  "process/1.0mm Standard @re3D fgf 1.75.json"
-                         },
-                         {
-                             "name":  "0.6 Standard",
-                             "sub_path":  "process/0.6mm Standard @re3D fgf 0.8.json"
-                         }
-                     ],
-    "filament_list":  [
-                          {
-                              "name":  "fdm_filament_common",
-                              "sub_path":  "filament/fdm_filament_common.json"
-                          },
-                          {
-                              "name":  "fdm_filament_pla",
-                              "sub_path":  "filament/fdm_filament_pla.json"
-                          },
-                          {
-                              "name":  "fdm_filament_pet",
-                              "sub_path":  "filament/fdm_filament_pet.json"
-                          },
-                          {
-                              "name":  "fdm_filament_pp",
-                              "sub_path":  "filament/fdm_filament_pp.json"
-                          },
-                          {
-                              "name":  "fdm_filament_pc",
-                              "sub_path":  "filament/fdm_filament_pc.json"
-                          },
-                          {
-                              "name":  "re3D PLA @0.4 nozzle",
-                              "sub_path":  "filament/re3D PLA @0.4 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D PLA @0.8 nozzle",
-                              "sub_path":  "filament/re3D PLA @0.8 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D PETG @0.4 nozzle",
-                              "sub_path":  "filament/re3D PETG @0.4 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D PETG @0.8 nozzle",
-                              "sub_path":  "filament/re3D PETG @0.8 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D PC @0.4 nozzle",
-                              "sub_path":  "filament/re3D PC @0.4 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D PC @0.8 nozzle",
-                              "sub_path":  "filament/re3D PC @0.8 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D rPETG @0.8 nozzle",
-                              "sub_path":  "filament/re3D rPETG @0.8 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D rPETG @1.75 nozzle",
-                              "sub_path":  "filament/re3D rPETG @1.75 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D rPP @0.8 nozzle",
-                              "sub_path":  "filament/re3D rPP @0.8 nozzle.json"
-                          },
-                          {
-                              "name":  "re3D rPP @1.75 nozzle",
-                              "sub_path":  "filament/re3D rPP @1.75 nozzle.json"
-                          }
-                      ],
-    "machine_list":  [
-                         {
-                             "name":  "fdm_machine_common",
-                             "sub_path":  "machine/fdm_machine_common.json"
-                         },
-                         {
-                             "name":  "fdm_re3D_common",
-                             "sub_path":  "machine/fdm_re3D_common.json"
-                         },
-                         {
-                             "name":  "fgf_re3D_common",
-                             "sub_path":  "machine/fgf_re3D_common.json"
-                         },
-                         {
-                             "name":  "re3D Gigabot 4 0.4 nozzle",
-                             "sub_path":  "machine/re3D Gigabot 4 0.4 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D Gigabot 4 0.8 nozzle",
-                             "sub_path":  "machine/re3D Gigabot 4 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D Gigabot 4 XLT 0.4 nozzle",
-                             "sub_path":  "machine/re3D Gigabot 4 XLT 0.4 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D Gigabot 4 XLT 0.8 nozzle",
-                             "sub_path":  "machine/re3D Gigabot 4 XLT 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D GigabotX 2 0.8 nozzle",
-                             "sub_path":  "machine/re3D GigabotX 2 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D GigabotX 2 1.75 nozzle",
-                             "sub_path":  "machine/re3D GigabotX 2 1.75 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D GigabotX 2 XLT 0.8 nozzle",
-                             "sub_path":  "machine/re3D GigabotX 2 XLT 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D GigabotX 2 XLT 1.75 nozzle",
-                             "sub_path":  "machine/re3D GigabotX 2 XLT 1.75 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D Terabot 4 0.4 nozzle",
-                             "sub_path":  "machine/re3D Terabot 4 0.4 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D Terabot 4 0.8 nozzle",
-                             "sub_path":  "machine/re3D Terabot 4 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D TerabotX 2 0.8 nozzle",
-                             "sub_path":  "machine/re3D TerabotX 2 0.8 nozzle.json"
-                         },
-                         {
-                             "name":  "re3D TerabotX 2 1.75 nozzle",
-                             "sub_path":  "machine/re3D TerabotX 2 1.75 nozzle.json"
-                         }
-                     ]
-}
\ No newline at end of file
+	"name": "re3D",
+	"url": "",
+	"version": "03.00.11",
+	"force_update": "0",
+	"description": "re3D configurations",
+	"machine_model_list": [
+		{
+			"name": "re3D Gigabot 4",
+			"sub_path": "machine/re3D Gigabot 4.json"
+		},
+		{
+			"name": "re3D Gigabot 4 XLT",
+			"sub_path": "machine/re3D Gigabot 4 XLT.json"
+		},
+		{
+			"name": "re3D GigabotX 2",
+			"sub_path": "machine/re3D GigabotX 2.json"
+		},
+		{
+			"name": "re3D GigabotX 2 XLT",
+			"sub_path": "machine/re3D GigabotX 2 XLT.json"
+		},
+		{
+			"name": "re3D Terabot 4",
+			"sub_path": "machine/re3D Terabot 4.json"
+		},
+		{
+			"name": "re3D TerabotX 2",
+			"sub_path": "machine/re3D TerabotX 2.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_re3D_common",
+			"sub_path": "process/fdm_process_re3D_common.json"
+		},
+		{
+			"name": "fgf_process_re3D_common",
+			"sub_path": "process/fgf_process_re3D_common.json"
+		},
+		{
+			"name": "0.2 Fine",
+			"sub_path": "process/0.2mm Fine @re3D fdm 0.4.json"
+		},
+		{
+			"name": "0.26 Standard",
+			"sub_path": "process/0.26mm Standard @re3D fdm 0.4.json"
+		},
+		{
+			"name": "0.3 Fine",
+			"sub_path": "process/0.3mm Fine @re3D fdm 0.8.json"
+		},
+		{
+			"name": "0.32 Draft",
+			"sub_path": "process/0.32mm Draft @re3D fdm 0.4.json"
+		},
+		{
+			"name": "0.4 Standard",
+			"sub_path": "process/0.4mm Draft @re3D fdm 0.8.json"
+		},
+		{
+			"name": "0.6 Standard",
+			"sub_path": "process/0.6mm Standard @re3D fgf 0.8.json"
+		},
+		{
+			"name": "1.0 Standard",
+			"sub_path": "process/1.0mm Standard @re3D fgf 1.75.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_pp",
+			"sub_path": "filament/fdm_filament_pp.json"
+		},
+		{
+			"name": "re3D PC @0.4 nozzle",
+			"sub_path": "filament/re3D PC @0.4 nozzle.json"
+		},
+		{
+			"name": "re3D PC @0.8 nozzle",
+			"sub_path": "filament/re3D PC @0.8 nozzle.json"
+		},
+		{
+			"name": "re3D PETG @0.4 nozzle",
+			"sub_path": "filament/re3D PETG @0.4 nozzle.json"
+		},
+		{
+			"name": "re3D PETG @0.8 nozzle",
+			"sub_path": "filament/re3D PETG @0.8 nozzle.json"
+		},
+		{
+			"name": "re3D rPETG @0.8 nozzle",
+			"sub_path": "filament/re3D rPETG @0.8 nozzle.json"
+		},
+		{
+			"name": "re3D rPETG @1.75 nozzle",
+			"sub_path": "filament/re3D rPETG @1.75 nozzle.json"
+		},
+		{
+			"name": "re3D PLA @0.4 nozzle",
+			"sub_path": "filament/re3D PLA @0.4 nozzle.json"
+		},
+		{
+			"name": "re3D PLA @0.8 nozzle",
+			"sub_path": "filament/re3D PLA @0.8 nozzle.json"
+		},
+		{
+			"name": "re3D rPP @0.8 nozzle",
+			"sub_path": "filament/re3D rPP @0.8 nozzle.json"
+		},
+		{
+			"name": "re3D rPP @1.75 nozzle",
+			"sub_path": "filament/re3D rPP @1.75 nozzle.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_machine_common",
+			"sub_path": "machine/fdm_machine_common.json"
+		},
+		{
+			"name": "fdm_re3D_common",
+			"sub_path": "machine/fdm_re3D_common.json"
+		},
+		{
+			"name": "fgf_re3D_common",
+			"sub_path": "machine/fgf_re3D_common.json"
+		},
+		{
+			"name": "re3D Gigabot 4 0.4 nozzle",
+			"sub_path": "machine/re3D Gigabot 4 0.4 nozzle.json"
+		},
+		{
+			"name": "re3D Gigabot 4 0.8 nozzle",
+			"sub_path": "machine/re3D Gigabot 4 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D Gigabot 4 XLT 0.4 nozzle",
+			"sub_path": "machine/re3D Gigabot 4 XLT 0.4 nozzle.json"
+		},
+		{
+			"name": "re3D Gigabot 4 XLT 0.8 nozzle",
+			"sub_path": "machine/re3D Gigabot 4 XLT 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D Terabot 4 0.4 nozzle",
+			"sub_path": "machine/re3D Terabot 4 0.4 nozzle.json"
+		},
+		{
+			"name": "re3D Terabot 4 0.8 nozzle",
+			"sub_path": "machine/re3D Terabot 4 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D GigabotX 2 0.8 nozzle",
+			"sub_path": "machine/re3D GigabotX 2 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D GigabotX 2 1.75 nozzle",
+			"sub_path": "machine/re3D GigabotX 2 1.75 nozzle.json"
+		},
+		{
+			"name": "re3D GigabotX 2 XLT 0.8 nozzle",
+			"sub_path": "machine/re3D GigabotX 2 XLT 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D GigabotX 2 XLT 1.75 nozzle",
+			"sub_path": "machine/re3D GigabotX 2 XLT 1.75 nozzle.json"
+		},
+		{
+			"name": "re3D TerabotX 2 0.8 nozzle",
+			"sub_path": "machine/re3D TerabotX 2 0.8 nozzle.json"
+		},
+		{
+			"name": "re3D TerabotX 2 1.75 nozzle",
+			"sub_path": "machine/re3D TerabotX 2 1.75 nozzle.json"
+		}
+	]
+}
diff --git a/resources/profiles/re3D/machine/fdm_machine_common.json b/resources/profiles/re3D/machine/fdm_machine_common.json
index 736342291d..8c7a63cff5 100644
--- a/resources/profiles/re3D/machine/fdm_machine_common.json
+++ b/resources/profiles/re3D/machine/fdm_machine_common.json
@@ -4,10 +4,11 @@
 	"from": "system",
 	"instantiation": "false",
 	"auxiliary_fan": "0",
-	"bed_exclude_area": ["0x0"],
+	"bed_exclude_area": [
+		"0x0"
+	],
 	"family": "re3D",
 	"gcode_flavor": "klipper",
 	"emit_machine_limits_to_gcode": "0",
-	"silent_mode": "0",
 	"scan_first_layer": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/re3D/machine/fgf_re3D_common.json b/resources/profiles/re3D/machine/fgf_re3D_common.json
index 3e0e409228..553bd126ee 100644
--- a/resources/profiles/re3D/machine/fgf_re3D_common.json
+++ b/resources/profiles/re3D/machine/fgf_re3D_common.json
@@ -1,9 +1,9 @@
 {
 	"type": "machine",
 	"name": "fgf_re3D_common",
+	"inherits": "fdm_machine_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_machine_common",
 	"gcode_flavor": "klipper",
 	"printer_settings_id": "",
 	"printer_technology": "FFF",
@@ -43,7 +43,6 @@
 		"30"
 	],
 	"z_hop_types": "Normal Lift",
-	"silent_mode": "0",
 	"single_extruder_multi_material": "0",
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
@@ -60,4 +59,4 @@
 	"scan_first_layer": "0",
 	"nozzle_type": "undefine",
 	"auxiliary_fan": "0"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/re3D/process/fdm_process_common.json b/resources/profiles/re3D/process/fdm_process_common.json
index dcd5c826ae..8a8f884b10 100644
--- a/resources/profiles/re3D/process/fdm_process_common.json
+++ b/resources/profiles/re3D/process/fdm_process_common.json
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"brim_width": "5",
diff --git a/resources/profiles/re3D/process/fdm_process_re3D_common.json b/resources/profiles/re3D/process/fdm_process_re3D_common.json
index ea169330f4..d72e984ae1 100644
--- a/resources/profiles/re3D/process/fdm_process_re3D_common.json
+++ b/resources/profiles/re3D/process/fdm_process_re3D_common.json
@@ -1,88 +1,87 @@
 {
-    "type": "process",
-    "name": "fdm_process_re3D_common",
-    "from": "system",
-    "instantiation": "false",
-    "inherits": "fdm_process_common",
-    "adaptive_layer_height": "0",
-    "reduce_crossing_wall": "1",
-    "bridge_flow": "0.985",
-    "brim_width": "8",
-    "print_sequence": "by layer",
-    "bridge_no_support": "0",
-    "elefant_foot_compensation": "0",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "rectilinear",
-    "infill_combination": "0",
-    "infill_wall_overlap": "25%",
-    "detect_overhang_wall": "1",
-    "reduce_infill_retraction": "0",
-    "filename_format": "{input_filename_base}.gcode",
-    "wall_loops": "3",
-    "wall_generator": "arachne",
-    "raft_layers": "0",
-    "seam_position": "nearest",
-    "skirt_distance": "8",
-    "skirt_height": "1",
-    "minimum_sparse_infill_area": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-75",
-    "enable_support": "1",
-    "support_filament": "0",
-    "support_interface_filament": "0",
-    "support_on_build_plate_only": "0",
-    "support_interface_loop_pattern": "0",
-    "support_interface_top_layers": "2",
-    "support_interface_spacing": "0.05",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "0.5",
-    "detect_thin_wall": "0",
-    "enable_prime_tower": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0",
-    "brim_object_gap": "0.1",
-    "compatible_printers_condition": "",
-    "draft_shield": "disabled",
-    "enable_arc_fitting": "1",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "infill_direction": "45",
-    "interface_shells": "0",
-    "ironing_flow": "10%",
-    "ironing_spacing": "0.1",
-    "ironing_type": "no ironing",
-    "print_settings_id": "fdm_process_re3D_common",
-    "skirt_loops": "2",
-    "resolution": "0.0",
-    "support_type": "normal(auto)",
-    "support_style": "snug",
-    "support_interface_bottom_layers": "2",
-    "tree_support_branch_angle": "45",
-    "tree_support_wall_count": "0",
-    "top_surface_pattern": "monotonicline",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.6",
-    "wipe_tower_no_sparse_layers": "0",
-    "precise_outer_wall": "0",
-    "accel_to_decel_enable": "0",
-    "prime_volume": "200",
-    "ooze_prevention": "1",
-    "preheat_time": "30",
-    "slow_down_layers": "2",
-    "small_perimeter_threshold": "10",
-    "exclude_object": "1",
-    "compatible_printers": [
-        "re3D Gigabot 4 0.4 nozzle",
-        "re3D Gigabot 4 0.8 nozzle",
-        "re3D Gigabot 4 XLT 0.4 nozzle",
-        "re3D Gigabot 4 XLT 0.8 nozzle",
-        "re3D Terabot 4 0.4 nozzle",
-        "re3D Terabot 4 0.8 nozzle"
-    ]
+	"type": "process",
+	"name": "fdm_process_re3D_common",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"instantiation": "false",
+	"reduce_crossing_wall": "1",
+	"bridge_flow": "0.985",
+	"brim_width": "8",
+	"print_sequence": "by layer",
+	"bridge_no_support": "0",
+	"elefant_foot_compensation": "0",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "rectilinear",
+	"infill_combination": "0",
+	"infill_wall_overlap": "25%",
+	"detect_overhang_wall": "1",
+	"reduce_infill_retraction": "0",
+	"filename_format": "{input_filename_base}.gcode",
+	"wall_loops": "3",
+	"wall_generator": "arachne",
+	"raft_layers": "0",
+	"seam_position": "nearest",
+	"skirt_distance": "8",
+	"skirt_height": "1",
+	"minimum_sparse_infill_area": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-75",
+	"enable_support": "1",
+	"support_filament": "0",
+	"support_interface_filament": "0",
+	"support_on_build_plate_only": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_spacing": "0.05",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "0.5",
+	"detect_thin_wall": "0",
+	"enable_prime_tower": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"draft_shield": "disabled",
+	"enable_arc_fitting": "1",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"infill_direction": "45",
+	"interface_shells": "0",
+	"ironing_flow": "10%",
+	"ironing_spacing": "0.1",
+	"ironing_type": "no ironing",
+	"print_settings_id": "fdm_process_re3D_common",
+	"skirt_loops": "2",
+	"resolution": "0.0",
+	"support_type": "normal(auto)",
+	"support_style": "snug",
+	"support_interface_bottom_layers": "2",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"top_surface_pattern": "monotonicline",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.6",
+	"wipe_tower_no_sparse_layers": "0",
+	"precise_outer_wall": "0",
+	"accel_to_decel_enable": "0",
+	"prime_volume": "200",
+	"ooze_prevention": "1",
+	"preheat_time": "30",
+	"slow_down_layers": "2",
+	"small_perimeter_threshold": "10",
+	"exclude_object": "1",
+	"compatible_printers": [
+		"re3D Gigabot 4 0.4 nozzle",
+		"re3D Gigabot 4 0.8 nozzle",
+		"re3D Gigabot 4 XLT 0.4 nozzle",
+		"re3D Gigabot 4 XLT 0.8 nozzle",
+		"re3D Terabot 4 0.4 nozzle",
+		"re3D Terabot 4 0.8 nozzle"
+	]
 }
diff --git a/resources/profiles/re3D/process/fgf_process_re3D_common.json b/resources/profiles/re3D/process/fgf_process_re3D_common.json
index 3258753500..902366c830 100644
--- a/resources/profiles/re3D/process/fgf_process_re3D_common.json
+++ b/resources/profiles/re3D/process/fgf_process_re3D_common.json
@@ -1,10 +1,9 @@
 {
 	"type": "process",
 	"name": "fgf_process_re3D_common",
+	"inherits": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_process_common",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "1",
 	"max_travel_detour_distance": "0",
 	"bottom_surface_pattern": "monotonicline",
@@ -112,4 +111,4 @@
 		"re3D TerabotX 2 0.8 nozzle",
 		"re3D TerabotX 2 1.75 nozzle"
 	]
-}
\ No newline at end of file
+}
diff --git a/resources/web/guide/21/common.css b/resources/web/guide/21/common.css
index e7cd57a32f..992c55d7a1 100644
--- a/resources/web/guide/21/common.css
+++ b/resources/web/guide/21/common.css
@@ -415,7 +415,9 @@ img.ModelThumbnail {
 	border-width: 1px;
 	border-style: solid;
 	border-radius: 4px;
-	background-color: inherit;	
+	border-color: var(--border-color);
+	background-color: var(--bg-color);
+	color: var(--fg-color-text);
 	position: absolute;
 	left: 50%;
 	top: 200px;
@@ -423,13 +425,17 @@ img.ModelThumbnail {
 }
 
 #NoticeBar {
-	background-color:#00f0d8;
+	background-color: var(--main-color);
 	height: 40px;
 	line-height: 40px;
 	color: #fff;
 	text-align: center;
 }
 
+#NoticeBar.notice-error {
+	background-color: var(--button-bg-alert);
+}
+
 #NoticeContent {
 	padding: 4mm 10mm;	
 }
diff --git a/resources/web/guide/21/common.js b/resources/web/guide/21/common.js
index f7e8b1d409..9a3c76c248 100644
--- a/resources/web/guide/21/common.js
+++ b/resources/web/guide/21/common.js
@@ -37,6 +37,34 @@ function HandleStudio( pVal )
 	{
 		HandleModelList(pVal['response']);
 	}
+	else if(strCmd=='check_new_printers_result')
+	{
+		let button = document.getElementById("CheckNewPrintersBtn");
+		if (button) {
+			button.style.pointerEvents = "auto";
+			button.style.opacity = "1";
+		}
+
+		let noticeBar = document.getElementById("NoticeBar");
+		let noticeText = document.getElementById("NoticeText");
+		let hasError = pVal.hasOwnProperty("error");
+		noticeBar.classList.toggle("notice-error", hasError);
+		if (hasError) {
+			noticeBar.textContent = "Error";
+			noticeText.textContent = pVal["error"];
+		} else if (pVal["vendors"] && pVal["vendors"].length > 0) {
+			noticeBar.textContent = "New printers found";
+			noticeText.textContent = "New printer vendors installed: " + pVal["vendors"].join(", ");
+		} else if (pVal["declined"]) {
+			noticeBar.textContent = "Information";
+			noticeText.textContent = "New printer vendors were found, but installation was cancelled.";
+		} else {
+			noticeBar.textContent = "Information";
+			noticeText.textContent = "No new printers found.";
+		}
+
+		ShowNotice(1);
+	}
 }
 
 function HandleModelList( pVal )
@@ -78,9 +106,13 @@ function HandleModelList( pVal )
 	}
 	
 	//Update Nozzel Html Append
+	// ORCA: HandleModelList can now be called more than once per dialog (e.g. after a new vendor
+	// is installed via "check for new printers"). pModel always holds the full, current list, so
+	// clear each vendor's printer area before repopulating instead of appending on top of a
+	// previous render.
 	for( let key in ModelHtml )
 	{
-		$(".OneVendorBlock[vendor='"+key+"'] .PrinterArea").append( ModelHtml[key] );
+		$(".OneVendorBlock[vendor='"+key+"'] .PrinterArea").empty().append( ModelHtml[key] );
 	}
 	
 	//Update Checkbox
@@ -343,6 +375,9 @@ function OnExit()
 	let nTotal=ModelSelect.length;
 
 	if( nTotal==0 ) {
+		let noticeBar = document.getElementById("NoticeBar");
+		noticeBar.classList.add("notice-error");
+		noticeBar.textContent = "Error";
 		ShowNotice(1);
 		return 0;
 	}
diff --git a/resources/web/guide/24/24.js b/resources/web/guide/24/24.js
index 74a03db7b9..19ccb892c6 100644
--- a/resources/web/guide/24/24.js
+++ b/resources/web/guide/24/24.js
@@ -36,6 +36,22 @@ function ConfirmSelect()
 	}
 }
 
+function CheckForNewPrinters()
+{
+	var tSend={};
+	tSend['sequence_id']=Math.round(new Date() / 1000);
+	tSend['command']="check_for_new_printers";
+	tSend['data']={};
+
+	var button = document.getElementById("CheckNewPrintersBtn");
+	if (button) {
+		button.style.pointerEvents = "none";
+		button.style.opacity = "0.6";
+	}
+
+	SendWXMessage( JSON.stringify(tSend) );
+}
+
 function CreateNewPrinter()
 {
 	var tSend={};
diff --git a/resources/web/guide/24/index.html b/resources/web/guide/24/index.html
index efb6148e0d..5f0a2407cc 100644
--- a/resources/web/guide/24/index.html
+++ b/resources/web/guide/24/index.html
@@ -82,7 +82,8 @@
 </div>
 <div id="AcceptArea">
 	<div class="ButtonStyleRegular ButtonTypeChoice trans"           id="CreateBtn"  onclick="CreateNewPrinter()">Create</div>
-	<div class="ButtonStyleConfirm ButtonTypeChoice trans" tid="t39" id="AcceptBtn"  onclick="ConfirmSelect()">Confirm</div>	
+	<div class="ButtonStyleRegular ButtonTypeChoice" id="CheckNewPrintersBtn" onclick="CheckForNewPrinters()">Check for new printers</div>
+	<div class="ButtonStyleConfirm ButtonTypeChoice trans" tid="t39" id="AcceptBtn"  onclick="ConfirmSelect()">Confirm</div>
 	<div class="ButtonStyleRegular ButtonTypeChoice trans" tid="t38" id="PreBtn"  onclick="CancelSelect()">Cancel</div>
 </div>
 	
diff --git a/resources/web/homepage/css/home.css b/resources/web/homepage/css/home.css
index 2cf5742747..950e330b86 100644
--- a/resources/web/homepage/css/home.css
+++ b/resources/web/homepage/css/home.css
@@ -716,7 +716,8 @@ body
 	background-color: #E4E4E4;
 	border-radius: 8px;
 	width: 184px;
-	height: 184px;	
+	height: 184px;
+	position: relative;	
 }
 
 .FileItem img
@@ -728,6 +729,19 @@ body
 	object-fit: cover;
 }
 
+.FileImg .FileLogoBadge
+{
+	position: absolute;
+	top: 8px;
+	left: 8px;
+	width: 26px;
+	height: 26px;
+	padding: 2px;
+	box-sizing: border-box;
+	background-color: rgba(255,255,255,0.85);
+	border-radius: 50%;
+}
+
 .FileName
 {
     white-space: nowrap;
@@ -736,6 +750,35 @@ body
     word-break: break-all;	
 }
 
+.FileNamePack
+{
+	display: flex;
+	align-items: center;
+	min-width: 0;
+	overflow: hidden;
+}
+
+.FileNamePack .FileName
+{
+	flex: 1 1 auto;
+	min-width: 0;
+}
+
+.FilePublishedBadge
+{
+	flex: 0 0 auto;
+	margin-right: 4px;
+	padding: 0 4px;
+	height: 16px;
+	line-height: 16px;
+	font-size: 10px;
+	font-weight: 600;
+	color: #FFFFFF;
+	background-color: #009688;
+	border-radius: 2px;
+	white-space: nowrap;
+}
+
 .FileDate
 {
 	color: #A8A8A8;
diff --git a/resources/web/homepage/js/home.js b/resources/web/homepage/js/home.js
index f07c6f10f5..aee0d8cd37 100644
--- a/resources/web/homepage/js/home.js
+++ b/resources/web/homepage/js/home.js
@@ -305,15 +305,19 @@ function ShowRecentFileList( pList )
 		let sImg=OneFile["image"] || sImages[sPath];
 		let sTime=OneFile['time'];
 		let sName=OneFile['project_name'];
+		let sPublished=OneFile['published'] == '1';
 		sImages[sPath] = sImg;
 		
 		//let index=sPath.lastIndexOf('\\')>0?sPath.lastIndexOf('\\'):sPath.lastIndexOf('\/');
 		//let sShortName=sPath.substring(index+1,sPath.length);
 		
+		let sBadge=sPublished? '<span class="FilePublishedBadge">PUB</span>':'';
+		let sLogoBadge=sPublished? '<img class="FileLogoBadge" src="../../images/OrcaSlicer_gradient_circle.svg" alt="" />':'';
+
 		let TmpHtml='<div class="FileItem"  fpath="'+sPath+'"  >'+
 				'<a class="FileTip" title="'+sPath+'"></a>'+
-				'<div class="FileImg" ><img src="'+sImg+'" onerror="this.onerror=null;this.src=\'img/d.png\';"  alt="No Image"  /></div>'+
-				'<div class="FileName TextS1">'+sName+'</div>'+
+				'<div class="FileImg" ><img src="'+sImg+'" onerror="this.onerror=null;this.src=\'img/d.png\';"  alt="No Image"  />'+sLogoBadge+'</div>'+
+				'<div class="FileNamePack">'+sBadge+'<div class="FileName TextS1">'+sName+'</div></div>'+
 				'<div class="FileDate">'+sTime+'</div>'+
 			    '</div>';
 		
diff --git a/scripts/check_profile.ps1 b/scripts/check_profile.ps1
index 66ed33c31d..1aa5a11bd7 100644
--- a/scripts/check_profile.ps1
+++ b/scripts/check_profile.ps1
@@ -9,12 +9,17 @@
     same semantics: every check runs even after an earlier one fails (the workflow's
     continue-on-error), then the script exits non-zero once at the end.
 
-        extra_json_check              scripts/orca_extra_profile_check.py
+        profile_tool                  scripts/orca_profile_tool.py check
         validate_system               validator -p <profiles> -l <level>
         validate_slice                validator -p <profiles> -s -l <level>
         validate_filament_subtypes    validator -p <profiles> -l <level> -f
         validate_custom               validator against every released custom-preset fixture
 
+    profile_tool is the only check that is not the validator binary; it makes the static checks
+    the validator cannot, because the validator loads the tree the way the slicer does and so
+    never sees a profile no <vendor>.json indexes, a preset name two files claim, or a file
+    normalize and update-index would still rewrite.
+
     Everything that has to be downloaded - the profile validator and the custom-preset fixture
     archives - lands under <repo>\.test\check_profiles and is reused on the next run. That
     directory also holds one log per check plus a copy of the comment CI would post on the PR.
@@ -33,15 +38,14 @@
     under emulation on ARM64.
 
 .PARAMETER ProfilesDir
-    Profile tree to validate (default: resources\profiles). extra_json_check always looks at the
-    tree next to the script, so this only redirects the validator checks.
+    Profile tree to validate (default: resources\profiles).
 
 .PARAMETER Vendor
     Check only this vendor, named after its <Vendor>.json (e.g. "Co Print"). validate_custom is
     narrowed with it too, by keeping only that vendor's presets in each fixture tree. The one
     check it cannot narrow is validate_slice for a vendor that ships no printers; the summary
-    reports that one as skipped, and naming it explicitly still runs it. extra_json_check keeps
-    its two cross-vendor checks (setting_id and filament_id) tree-wide, so a scoped run can still
+    reports that one as skipped, and naming it explicitly still runs it. profile_tool keeps its
+    two cross-vendor checks (setting_id and filament_id) tree-wide, so a scoped run can still
     fail on another vendor's files.
 
 .PARAMETER Validator
@@ -110,7 +114,7 @@ $HostArch = switch ($HostArch) {
     default { 'x86' }
 }
 
-$AllChecks = @('extra_json_check', 'validate_system', 'validate_slice', 'validate_filament_subtypes', 'validate_custom')
+$AllChecks = @('profile_tool', 'validate_system', 'validate_slice', 'validate_filament_subtypes', 'validate_custom')
 
 $script:LogWriter = $null
 $script:Python = ''
@@ -203,7 +207,7 @@ if ($Vendor) {
     }
 }
 
-# The validator's -v and orca_extra_profile_check.py's --vendor both take that stem; an unscoped
+# The validator's -v and orca_profile_tool.py check's --vendor both take that stem; an unscoped
 # run passes neither, so the checks below splat these in either way.
 $VendorArgs = if ($Vendor) { @('-v', $Vendor) } else { @() }
 $VendorPyArgs = if ($Vendor) { @('--vendor', $Vendor) } else { @() }
@@ -434,8 +438,8 @@ function Expand-VendorPresets([string] $Zip, [string] $Tree, [string] $Prefix) {
 
 $CheckBodies = @{
 
-    extra_json_check = {
-        Invoke-Tool -Exe (Resolve-Python) -Arguments (@((Join-Path $RepoRoot 'scripts\orca_extra_profile_check.py')) + $VendorPyArgs)
+    profile_tool = {
+        Invoke-Tool -Exe (Resolve-Python) -Arguments (@((Join-Path $RepoRoot 'scripts\orca_profile_tool.py'), 'check', '--profiles', $ProfilesDir) + $VendorPyArgs)
     }
 
     validate_system = {
@@ -571,7 +575,7 @@ $CheckBodies = @{
 
 # Heading CI puts above this check's log in the PR comment.
 $CommentHeadings = @{
-    extra_json_check           = '### Extra JSON Check Failed'
+    profile_tool               = '### Profile Check Failed (orca_profile_tool.py)'
     validate_system            = '### System Profile Validation Failed'
     validate_slice             = '### Slice Validation Failed (custom g-code expansion)'
     validate_filament_subtypes = '### Filament Subtype Validation Failed'
@@ -618,7 +622,7 @@ try {
     [Console]::OutputEncoding = New-Object Text.UTF8Encoding($false)
     Push-UserPresets
 
-    if ($Checks | Where-Object { $_ -ne 'extra_json_check' }) { $Validator = Resolve-Validator }
+    if ($Checks | Where-Object { $_ -ne 'profile_tool' }) { $Validator = Resolve-Validator }
 
     # An empty printer set is a failure to the sweep, so validate_slice is recorded as skipped
     # rather than run for a vendor that ships no printers (the filament-only OrcaFilamentLibrary);
@@ -673,7 +677,7 @@ try {
             ''
         }
         '---'
-        '*Please fix the above errors and push a new commit.*'
+        '*Fix the errors above and push a new commit. To reproduce this run locally: `scripts/check_profile.sh`, or `scripts\check_profile.bat` on Windows.*'
     )
     $commentPath = Join-Path $WorkDir 'pr_comment.md'
     [IO.File]::WriteAllLines($commentPath, [string[]] $comment)
diff --git a/scripts/check_profile.sh b/scripts/check_profile.sh
index 51c8599b60..42e72b93f7 100755
--- a/scripts/check_profile.sh
+++ b/scripts/check_profile.sh
@@ -38,7 +38,7 @@ PROFILES_DIR="${REPO_ROOT}/resources/profiles"
 WORK_DIR="${REPO_ROOT}/.test/check_profiles"
 VALIDATOR="${ORCA_PROFILE_VALIDATOR:-}"
 # Vendor to check, named after its <Vendor>.json - empty means every vendor, which is exactly what
-# both the validator's -v and orca_extra_profile_check.py's --vendor take an empty value to mean.
+# both the validator's -v and orca_profile_tool.py check's --vendor take an empty value to mean.
 # So the flag is passed unconditionally below rather than kept in an array bash 3.2 cannot expand
 # empty under `set -u`.
 VENDOR=""
@@ -46,7 +46,7 @@ LOG_LEVEL=2
 PREFER_DOWNLOAD=0
 REFRESH=0
 
-ALL_CHECKS=(extra_json_check validate_system validate_slice validate_filament_subtypes validate_custom)
+ALL_CHECKS=(profile_tool validate_system validate_slice validate_filament_subtypes validate_custom)
 CHECKS=()
 # "<check><TAB>pass|fail" per check that ran, plus "<check><TAB>skip<TAB>why" for one a vendor
 # scope left out; a string rather than an array because bash 3.2 (still the /bin/bash on macOS)
@@ -60,7 +60,7 @@ Run the profile checks from .github/workflows/check_profiles.yml locally.
 Usage: scripts/check_profile.sh [OPTION]... [CHECK]...
 
 Checks (default: all, in this order):
-  extra_json_check              scripts/orca_extra_profile_check.py
+  profile_tool                  scripts/orca_profile_tool.py check
   validate_system               validator -p <profiles> -l <level>
   validate_slice                validator -p <profiles> -s -l <level>
   validate_filament_subtypes    validator -p <profiles> -l <level> -f
@@ -79,14 +79,16 @@ Options:
   -l, --log-level N    validator log level (default: ${LOG_LEVEL}, as in CI)
   -h, --help           show this help
 
-Note: extra_json_check always looks at the tree next to the script
-(<repo>/resources/profiles); --profiles only redirects the validator checks.
+Note: profile_tool is the only check that is not the validator binary; it makes the static
+checks the validator cannot, because the validator loads the tree the way the slicer does
+and so never sees a profile no <vendor>.json indexes, a preset name two files claim, or a
+file normalize and update-index would still rewrite.
 
 Note: --vendor narrows validate_custom too, by keeping only that vendor's presets in each
 fixture tree. The one check it cannot narrow is validate_slice for a vendor that ships no
 printers; the summary reports that one as skipped, and naming it explicitly still runs it.
-extra_json_check keeps its two cross-vendor checks (setting_id and filament_id) tree-wide,
-so a scoped run can still fail on another vendor's files.
+profile_tool keeps its two cross-vendor checks (setting_id and filament_id) tree-wide, so a
+scoped run can still fail on another vendor's files.
 EOF
 }
 
@@ -361,8 +363,8 @@ resolve_validator() {
 
 # ---------------------------------------------------------------------------- checks
 
-check_extra_json_check() {
-    python3 "${REPO_ROOT}/scripts/orca_extra_profile_check.py" --vendor "${VENDOR}"
+check_profile_tool() {
+    python3 "${REPO_ROOT}/scripts/orca_profile_tool.py" check --profiles "${PROFILES_DIR}" --vendor "${VENDOR}"
 }
 
 check_validate_system() {
@@ -548,7 +550,7 @@ EOF
 # Heading CI puts above this check's log in the PR comment.
 comment_heading() {
     case "$1" in
-        extra_json_check) echo "### Extra JSON Check Failed" ;;
+        profile_tool) echo "### Profile Check Failed (orca_profile_tool.py)" ;;
         validate_system) echo "### System Profile Validation Failed" ;;
         validate_slice) echo "### Slice Validation Failed (custom g-code expansion)" ;;
         validate_filament_subtypes) echo "### Filament Subtype Validation Failed" ;;
@@ -638,7 +640,9 @@ fi
 ${RESULTS}
 INNER
     echo "---"
-    echo "*Please fix the above errors and push a new commit.*"
+    # Single-quoted on purpose: the backticks below are markdown, not command substitution.
+    # shellcheck disable=SC2016
+    echo '*Fix the errors above and push a new commit. To reproduce this run locally: `scripts/check_profile.sh`, or `scripts\check_profile.bat` on Windows.*'
 } > "${WORK_DIR}/pr_comment.md"
 
 printf '\n%sOne or more profile checks failed.%s Logs: %s\n' "${C_RED}" "${C_RESET}" "${LOG_DIR}"
diff --git a/scripts/filament_id_snapshot.json b/scripts/filament_id_snapshot.json
deleted file mode 100644
index 5b45e5ca7e..0000000000
--- a/scripts/filament_id_snapshot.json
+++ /dev/null
@@ -1,7783 +0,0 @@
-{
- "ids": {
-  "OF02UAVh": {
-   "filaments": [
-    "Creality/Soleyin Ultra PLA"
-   ],
-   "name": "Soleyin Ultra PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OF03RK6r": {
-   "filaments": [
-    "BBL/BETA PLA Metal"
-   ],
-   "name": "BETA PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF0AquDh": {
-   "filaments": [
-    "Flashforge/FusRock S-Multi"
-   ],
-   "name": "FusRock S-Multi",
-   "filament_type": "PA",
-   "filament_vendor": "FusRock"
-  },
-  "OF0EYBWQ": {
-   "filaments": [
-    "BBL/addnorth PETG Flame v0"
-   ],
-   "name": "addnorth PETG Flame v0",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OF0FfcAG": {
-   "filaments": [
-    "Anycubic/Anycubic TPU for ACE"
-   ],
-   "name": "Anycubic TPU for ACE",
-   "filament_type": "TPU",
-   "filament_vendor": "Anycubic"
-  },
-  "OF0NgY1y": {
-   "filaments": [
-    "BBL/COEX NYLEX PA6-CF",
-    "OrcaFilamentLibrary/COEX NYLEX PA6-CF"
-   ],
-   "name": "COEX NYLEX PA6-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "COEX 3D"
-  },
-  "OF0R5Wc7": {
-   "filaments": [
-    "Artillery/Artillery PLA Tough"
-   ],
-   "name": "Artillery PLA Tough",
-   "filament_type": "PLA Tough",
-   "filament_vendor": "Artillery"
-  },
-  "OF0UJcb6": {
-   "filaments": [
-    "BBL/PolyLite PETG",
-    "OrcaFilamentLibrary/PolyLite PETG",
-    "Snapmaker/PolyLite PETG"
-   ],
-   "name": "PolyLite PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Polymaker"
-  },
-  "OF0VpkBM": {
-   "filaments": [
-    "Snapmaker/PolyLite PETG Translucent"
-   ],
-   "name": "PolyLite PETG Translucent",
-   "filament_type": "PETG",
-   "filament_vendor": "Polymaker"
-  },
-  "OF0Vtzaw": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Amarillo Radiante"
-   ],
-   "name": "FilAr PETG Amarillo Radiante",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OF0b7M1z": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC PA-CF"
-   ],
-   "name": "SeeMeCNC PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OF0c7mnL": {
-   "filaments": [
-    "InfiMech/InfiMech ABS"
-   ],
-   "name": "InfiMech ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "InfiMech"
-  },
-  "OF0gGRWk": {
-   "filaments": [
-    "BBL/Panchroma PLA Glow",
-    "OrcaFilamentLibrary/Panchroma PLA Glow",
-    "Snapmaker/Panchroma PLA Glow"
-   ],
-   "name": "Panchroma PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF0kCNDK": {
-   "filaments": [
-    "BBL/Panchroma PLA Luminous",
-    "OrcaFilamentLibrary/Panchroma PLA Luminous",
-    "Snapmaker/Panchroma PLA Luminous"
-   ],
-   "name": "Panchroma PLA Luminous",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF0omtEb": {
-   "filaments": [
-    "Snapmaker/Fiberon ASA-CF08"
-   ],
-   "name": "Fiberon ASA-CF08",
-   "filament_type": "ASA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF0pzFLc": {
-   "filaments": [
-    "BBL/COEX PLA+Silk",
-    "OrcaFilamentLibrary/COEX PLA+Silk"
-   ],
-   "name": "COEX PLA+Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "COEX 3D"
-  },
-  "OF0w7OpJ": {
-   "filaments": [
-    "Qidi/QIDI ABS Rapido 0.8 nozzle"
-   ],
-   "name": "QIDI ABS Rapido 0.8 nozzle",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OF0wBGNx": {
-   "filaments": [
-    "BBL/Bambu ASA-CF",
-    "OrcaFilamentLibrary/Bambu ASA-CF"
-   ],
-   "name": "Bambu ASA-CF",
-   "filament_type": "ASA-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF0wz84w": {
-   "filaments": [
-    "Qidi/QIDI ABS Rapido 0.6 nozzle"
-   ],
-   "name": "QIDI ABS Rapido 0.6 nozzle",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OF0yFLkY": {
-   "filaments": [
-    "Anycubic/Anycubic ASA"
-   ],
-   "name": "Anycubic ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Anycubic"
-  },
-  "OF112FvY": {
-   "filaments": [
-    "Anycubic/Generic PETG Basic"
-   ],
-   "name": "Generic PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OF1ID4N1": {
-   "filaments": [
-    "BBL/addnorth PA6 Addlantis"
-   ],
-   "name": "addnorth PA6 Addlantis",
-   "filament_type": "PA6",
-   "filament_vendor": "addnorth"
-  },
-  "OF1N1qMK": {
-   "filaments": [
-    "BBL/Panchroma PLA UV Shift",
-    "OrcaFilamentLibrary/Panchroma PLA UV Shift",
-    "Snapmaker/Panchroma PLA UV Shift"
-   ],
-   "name": "Panchroma PLA UV Shift",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF1Pke8t": {
-   "filaments": [
-    "BBL/Overture Easy PLA",
-    "OrcaFilamentLibrary/Overture Easy PLA"
-   ],
-   "name": "Overture Easy PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OF1UNk9P": {
-   "filaments": [
-    "BBL/Generic PP",
-    "Creality/Generic PP",
-    "OrcaFilamentLibrary/Generic PP",
-    "Tiertime/Generic PP"
-   ],
-   "name": "Generic PP",
-   "filament_type": "PP",
-   "filament_vendor": "Generic"
-  },
-  "OF1W7c76": {
-   "filaments": [
-    "Qidi/QIDI ASA-CF"
-   ],
-   "name": "QIDI ASA-CF",
-   "filament_type": "ASA-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OF1d7c3A": {
-   "filaments": [
-    "Snapmaker/Snapmaker ASA"
-   ],
-   "name": "Snapmaker ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF1dpPrW": {
-   "filaments": [
-    "Qidi/Bambu PLA"
-   ],
-   "name": "Bambu PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF1hznGB": {
-   "filaments": [
-    "Elegoo/Elegoo PLA PRO",
-    "OrcaFilamentLibrary/Elegoo PLA PRO"
-   ],
-   "name": "Elegoo PLA PRO",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OF20kXr5": {
-   "filaments": [
-    "Elegoo/Elegoo PAHT-CF",
-    "OrcaFilamentLibrary/Elegoo PAHT-CF"
-   ],
-   "name": "Elegoo PAHT-CF",
-   "filament_type": "PA",
-   "filament_vendor": "Elegoo"
-  },
-  "OF223rZv": {
-   "filaments": [
-    "Anycubic/Anycubic ABS"
-   ],
-   "name": "Anycubic ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Anycubic"
-  },
-  "OF2EB9Iz": {
-   "filaments": [
-    "Volumic/Volumic ASA Ultra"
-   ],
-   "name": "Volumic ASA Ultra",
-   "filament_type": "ASA",
-   "filament_vendor": "Volumic"
-  },
-  "OF2EK9F1": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Violeta"
-   ],
-   "name": "FilAr PLA-mate Violeta",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF2GCW1l": {
-   "filaments": [
-    "BBL/SUNLU PETG",
-    "Flashforge/SUNLU PETG",
-    "OrcaFilamentLibrary/SUNLU PETG",
-    "Sovol/SUNLU PETG"
-   ],
-   "name": "SUNLU PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "SUNLU"
-  },
-  "OF2TQpOO": {
-   "filaments": [
-    "Qidi/QIDI PLA Silk"
-   ],
-   "name": "QIDI PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OF2VFe4J": {
-   "filaments": [
-    "BBL/Bambu PAHT-CF",
-    "OrcaFilamentLibrary/Bambu PAHT-CF"
-   ],
-   "name": "Bambu PAHT-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF2Z1nT5": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Azul Imperial"
-   ],
-   "name": "FilAr PETG Azul Imperial",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OF2hfMcG": {
-   "filaments": [
-    "OrcaArena/Arena PLA-CF"
-   ],
-   "name": "Arena PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Orca Arena"
-  },
-  "OF2pj5l5": {
-   "filaments": [
-    "BBL/Overture Super PLA+",
-    "OrcaFilamentLibrary/Overture Super PLA+"
-   ],
-   "name": "Overture Super PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OF2xccEe": {
-   "filaments": [],
-   "name": "DREMC ASA GF",
-   "filament_type": "ASA",
-   "filament_vendor": "DREMC"
-  },
-  "OF30Ftju": {
-   "filaments": [
-    "Elegoo/Elegoo Rapid TPU 95A",
-    "OrcaFilamentLibrary/Elegoo Rapid TPU 95A"
-   ],
-   "name": "Elegoo Rapid TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Elegoo"
-  },
-  "OF342jVN": {
-   "filaments": [
-    "BBL/Bambu PLA Tough+"
-   ],
-   "name": "Bambu PLA Tough+",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF3F63OE": {
-   "filaments": [
-    "re3D/re3D PETG"
-   ],
-   "name": "re3D PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "re3D"
-  },
-  "OF3IKafc": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido Matte"
-   ],
-   "name": "QIDI PLA Rapido Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OF3OMgrI": {
-   "filaments": [
-    "Creality/CR-Silk"
-   ],
-   "name": "CR-Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OF3PDEw3": {
-   "filaments": [
-    "BBL/BETA PLA High Speed"
-   ],
-   "name": "BETA PLA High Speed",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF3WQaKK": {
-   "filaments": [
-    "Creality/CR-PETG"
-   ],
-   "name": "CR-PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Creality"
-  },
-  "OF3dJf4E": {
-   "filaments": [
-    "Volumic/Volumic PLA Ultra (Performance)"
-   ],
-   "name": "Volumic PLA Ultra (Performance)",
-   "filament_type": "PLA",
-   "filament_vendor": "Volumic"
-  },
-  "OF3fwO8b": {
-   "filaments": [
-    "FlyingBear/FlyingBear PLA Basic"
-   ],
-   "name": "FlyingBear PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "FlyingBear"
-  },
-  "OF3kBrdA": {
-   "filaments": [
-    "Creality/eSUN PETG",
-    "OrcaFilamentLibrary/eSUN PETG"
-   ],
-   "name": "eSUN PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "eSUN"
-  },
-  "OF3msXEa": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PETG-CF"
-   ],
-   "name": "Snapmaker Dual PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF3ydJTT": {
-   "filaments": [
-    "InfiMech/InfiMech PLA Hyper"
-   ],
-   "name": "InfiMech PLA Hyper",
-   "filament_type": "PLA",
-   "filament_vendor": "InfiMech"
-  },
-  "OF43Raws": {
-   "filaments": [
-    "Snapmaker/PolyTerra J1 PLA"
-   ],
-   "name": "PolyTerra J1 PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF44ERDr": {
-   "filaments": [
-    "Snapmaker/Polymaker General PLA Family"
-   ],
-   "name": "Polymaker General PLA Family",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF44VYzK": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Azul Francia"
-   ],
-   "name": "FilAr PETG Azul Francia",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OF4APyxe": {
-   "filaments": [
-    "Creality/Hyper PAHT-CF"
-   ],
-   "name": "Hyper PAHT-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OF4GM5qX": {
-   "filaments": [
-    "Ratrig/Generic ASA BigNozzle"
-   ],
-   "name": "Generic ASA BigNozzle",
-   "filament_type": "ASA",
-   "filament_vendor": "Generic"
-  },
-  "OF4KsW72": {
-   "filaments": [],
-   "name": "FilAr PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF4Nhggz": {
-   "filaments": [
-    "Artillery/Artillery PLA Basic+"
-   ],
-   "name": "Artillery PLA Basic+",
-   "filament_type": "PLA Basic+",
-   "filament_vendor": "Artillery"
-  },
-  "OF4PKvem": {
-   "filaments": [
-    "BBL/BETA PLA Fluorescence"
-   ],
-   "name": "BETA PLA Fluorescence",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF4QZANi": {
-   "filaments": [
-    "BBL/BETA TPU Matte"
-   ],
-   "name": "BETA TPU Matte",
-   "filament_type": "TPU",
-   "filament_vendor": "BETA"
-  },
-  "OF4RvVuU": {
-   "filaments": [
-    "BBL/Bambu PPS-CF"
-   ],
-   "name": "Bambu PPS-CF",
-   "filament_type": "PPS-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF4S3To3": {
-   "filaments": [
-    "Qidi/QIDI PETG Rapido"
-   ],
-   "name": "QIDI PETG Rapido",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OF4WB37S": {
-   "filaments": [
-    "Snapmaker/Snapmaker PETG"
-   ],
-   "name": "Snapmaker PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF4XTfoI": {
-   "filaments": [
-    "BBL/BETA PETG Marble"
-   ],
-   "name": "BETA PETG Marble",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OF4f8vVp": {
-   "filaments": [
-    "WonderMaker/WonderMaker PET-CF"
-   ],
-   "name": "WonderMaker PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "WonderMaker"
-  },
-  "OF4iWKrE": {
-   "filaments": [
-    "Qidi/QIDI PETG-CF"
-   ],
-   "name": "QIDI PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OF4nQ62r": {
-   "filaments": [
-    "Qidi/QIDI PLA Basic"
-   ],
-   "name": "QIDI PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OF4ulo9Y": {
-   "filaments": [
-    "WonderMaker/WonderMaker PVA"
-   ],
-   "name": "WonderMaker PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OF53eLVD": {
-   "filaments": [
-    "Blocks/Generic ASA-CF",
-    "Creality/Generic ASA-CF",
-    "Elegoo/Generic ASA-CF"
-   ],
-   "name": "Generic ASA-CF",
-   "filament_type": "ASA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OF54B0S0": {
-   "filaments": [
-    "BBL/Bambu PPA-CF",
-    "OrcaFilamentLibrary/Bambu PPA-CF"
-   ],
-   "name": "Bambu PPA-CF",
-   "filament_type": "PPA-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF54SvEe": {
-   "filaments": [
-    "Prusa/Prusament PA-CF"
-   ],
-   "name": "Prusament PA-CF",
-   "filament_type": "PA11-CF",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OF55jHAJ": {
-   "filaments": [
-    "Prusa/Generic ABS HF"
-   ],
-   "name": "Generic ABS HF",
-   "filament_type": "ABS",
-   "filament_vendor": "Generic"
-  },
-  "OF5B9sUc": {
-   "filaments": [
-    "BBL/Fiberon PA6-GF25"
-   ],
-   "name": "Fiberon PA6-GF25",
-   "filament_type": "PA-GF",
-   "filament_vendor": "Polymaker"
-  },
-  "OF5BN24W": {
-   "filaments": [
-    "Flashforge/Flashforge PPA-GF"
-   ],
-   "name": "Flashforge PPA-GF",
-   "filament_type": "PPA-GF",
-   "filament_vendor": "Flashforge"
-  },
-  "OF5BXhHF": {
-   "filaments": [
-    "BBL/BETA PLA High Temp"
-   ],
-   "name": "BETA PLA High Temp",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF5CgdDq": {
-   "filaments": [
-    "BBL/PolyLite PLA",
-    "OrcaArena/PolyLite PLA",
-    "OrcaFilamentLibrary/PolyLite PLA",
-    "Qidi/PolyLite PLA",
-    "Snapmaker/PolyLite PLA"
-   ],
-   "name": "PolyLite PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF5LAnla": {
-   "filaments": [
-    "BBL/BETA PLA Gradient"
-   ],
-   "name": "BETA PLA Gradient",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF5NqBfC": {
-   "filaments": [
-    "Wanhao France/YUMI PETG"
-   ],
-   "name": "YUMI PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Yumi"
-  },
-  "OF5P4jgA": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Dorado"
-   ],
-   "name": "FilAr PLA Dorado",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF5PtjTp": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Glow"
-   ],
-   "name": "Anycubic PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OF5SJ3jz": {
-   "filaments": [
-    "Flashforge/Flashforge ABS"
-   ],
-   "name": "Flashforge ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Flashforge"
-  },
-  "OF5YVJXH": {
-   "filaments": [
-    "Artillery/Artillery ASA"
-   ],
-   "name": "Artillery ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Artillery"
-  },
-  "OF5c6nq3": {
-   "filaments": [
-    "Flashforge/Generic TPU-64D"
-   ],
-   "name": "Generic TPU-64D",
-   "filament_type": "TPU-64D",
-   "filament_vendor": "Generic"
-  },
-  "OF5lGPup": {
-   "filaments": [
-    "WonderMaker/WonderMaker PETG Basic"
-   ],
-   "name": "WonderMaker PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "WonderMaker"
-  },
-  "OF5nlfKY": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Oro"
-   ],
-   "name": "FilAr PLA Oro",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF5oNRED": {
-   "filaments": [
-    "Eryone/Eryone PP"
-   ],
-   "name": "Eryone PP",
-   "filament_type": "PP",
-   "filament_vendor": "Eryone"
-  },
-  "OF5oXk4M": {
-   "filaments": [
-    "Anycubic/Polymaker PLA Pro",
-    "Snapmaker/Polymaker PLA Pro"
-   ],
-   "name": "Polymaker PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF5rnhjh": {
-   "filaments": [],
-   "name": "FilAr PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OF5tX6va": {
-   "filaments": [
-    "Ratrig/Generic TPU BigNozzle"
-   ],
-   "name": "Generic TPU BigNozzle",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OF5umxxT": {
-   "filaments": [
-    "BBL/PolyLite PLA Glow",
-    "Snapmaker/PolyLite PLA Glow"
-   ],
-   "name": "PolyLite PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF5vgi2G": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Azul"
-   ],
-   "name": "FilAr PLA-mate Azul",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF65InrS": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPU"
-   ],
-   "name": "Snapmaker TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF66KUAN": {
-   "filaments": [
-    "Creality/PolySonic PLA"
-   ],
-   "name": "PolySonic PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF6ATsCF": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA-CF"
-   ],
-   "name": "Snapmaker Dual PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF6H51Xx": {
-   "filaments": [
-    "Snapmaker/Polymaker PETG",
-    "Sovol/Polymaker PETG"
-   ],
-   "name": "Polymaker PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Polymaker"
-  },
-  "OF6Ll8lK": {
-   "filaments": [
-    "Elegoo/Elegoo PETG Translucent",
-    "OrcaFilamentLibrary/Elegoo PETG Translucent"
-   ],
-   "name": "Elegoo PETG Translucent",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OF6MOPWx": {
-   "filaments": [
-    "Creality/Generic PET",
-    "Elegoo/Generic PET",
-    "Flashforge/Generic PET"
-   ],
-   "name": "Generic PET",
-   "filament_type": "PET",
-   "filament_vendor": "Generic"
-  },
-  "OF6TuVAg": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PVA"
-   ],
-   "name": "Snapmaker J1 PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF6Yn69v": {
-   "filaments": [
-    "BBL/BETA TPU 90A"
-   ],
-   "name": "BETA TPU 90A",
-   "filament_type": "TPU",
-   "filament_vendor": "BETA"
-  },
-  "OF6kj4jI": {
-   "filaments": [
-    "iQ/Fiberthree PACF Pro P2"
-   ],
-   "name": "Fiberthree PACF Pro P2",
-   "filament_type": "PACF Pro",
-   "filament_vendor": "iQ Materials"
-  },
-  "OF6qAuyi": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Matte"
-   ],
-   "name": "Flashforge PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OF6qw3Wb": {
-   "filaments": [
-    "BBL/BETA PAHT-CF"
-   ],
-   "name": "BETA PAHT-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "BETA"
-  },
-  "OF6rdQ6M": {
-   "filaments": [
-    "BBL/Generic PPS-CF",
-    "Creality/Generic PPS-CF",
-    "Tiertime/Generic PPS-CF"
-   ],
-   "name": "Generic PPS-CF",
-   "filament_type": "PPS-CF",
-   "filament_vendor": "Generic"
-  },
-  "OF70zbGS": {
-   "filaments": [
-    "Creality/Hyper L-W PLA"
-   ],
-   "name": "Hyper L-W PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OF71b7qO": {
-   "filaments": [
-    "BBL/addnorth PLA E-PLA"
-   ],
-   "name": "addnorth PLA E-PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OF72YYTd": {
-   "filaments": [
-    "Snapmaker/Snapmaker ABS"
-   ],
-   "name": "Snapmaker ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF74KeQR": {
-   "filaments": [
-    "BBL/Generic PHA",
-    "OrcaFilamentLibrary/Generic PHA",
-    "Tiertime/Generic PHA"
-   ],
-   "name": "Generic PHA",
-   "filament_type": "PHA",
-   "filament_vendor": "Generic"
-  },
-  "OF7H3VJM": {
-   "filaments": [
-    "OrcaFilamentLibrary/eSUN PLA-Marble"
-   ],
-   "name": "eSUN PLA-Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OF7OqDp3": {
-   "filaments": [
-    "Tiertime/Tiertime PLA-CF"
-   ],
-   "name": "Tiertime PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Tiertime"
-  },
-  "OF7SliVn": {
-   "filaments": [
-    "Snapmaker/PolyLite J1 PLA"
-   ],
-   "name": "PolyLite J1 PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OF7c9fln": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Translucent"
-   ],
-   "name": "Anycubic PLA Translucent",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OF7lOgYF": {
-   "filaments": [
-    "BBL/Generic PETG HF",
-    "OrcaFilamentLibrary/Generic PETG HF",
-    "Prusa/Generic PETG HF"
-   ],
-   "name": "Generic PETG HF",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OF7lwj52": {
-   "filaments": [
-    "CoLiDo/CoLiDo PETG"
-   ],
-   "name": "CoLiDo PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "CoLiDo"
-  },
-  "OF7nBAd3": {
-   "filaments": [
-    "Eryone/Eryone Silk PLA"
-   ],
-   "name": "Eryone Silk PLA",
-   "filament_type": "PLA Silk",
-   "filament_vendor": "Eryone"
-  },
-  "OF7pjCsO": {
-   "filaments": [
-    "Flashforge/FusRock PAHT"
-   ],
-   "name": "FusRock PAHT",
-   "filament_type": "PAHT",
-   "filament_vendor": "FusRock"
-  },
-  "OF7tt7DO": {
-   "filaments": [
-    "Cubicon/Cubicon PLA+"
-   ],
-   "name": "Cubicon PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Cubicon"
-  },
-  "OF8GnyFU": {
-   "filaments": [
-    "Creality/Hyper ABS"
-   ],
-   "name": "Hyper ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Creality"
-  },
-  "OF8GtyKJ": {
-   "filaments": [
-    "Flashforge/Flashforge TPU-64D"
-   ],
-   "name": "Flashforge TPU-64D",
-   "filament_type": "TPU-64D",
-   "filament_vendor": "Flashforge"
-  },
-  "OF8Jl6NT": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PET"
-   ],
-   "name": "Snapmaker J1 PET",
-   "filament_type": "PET",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF8O09RG": {
-   "filaments": [
-    "Flashforge/Flashforge HS PLA Burnt Ti"
-   ],
-   "name": "Flashforge HS PLA Burnt Ti",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OF8QdQwS": {
-   "filaments": [
-    "BBL/BETA PLA Silk+"
-   ],
-   "name": "BETA PLA Silk+",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OF8Tlg47": {
-   "filaments": [
-    "BBL/Generic PPA-GF",
-    "OrcaFilamentLibrary/Generic PPA-GF",
-    "Tiertime/Generic PPA-GF"
-   ],
-   "name": "Generic PPA-GF",
-   "filament_type": "PPA-GF",
-   "filament_vendor": "Generic"
-  },
-  "OF8aFWfQ": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Amarillo Lirio"
-   ],
-   "name": "FilAr PLA Amarillo Lirio",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF8dCquh": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 ABS Benchy"
-   ],
-   "name": "Snapmaker J1 ABS Benchy",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OF8eaY7j": {
-   "filaments": [
-    "Creality/Generic PA612-CF"
-   ],
-   "name": "Generic PA612-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OF8jh0Lk": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Marron"
-   ],
-   "name": "FilAr PLA-mate Marron",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OF8kJys9": {
-   "filaments": [
-    "Eryone/Eryone PETG"
-   ],
-   "name": "Eryone PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Eryone"
-  },
-  "OF8tPByX": {
-   "filaments": [
-    "BBL/Generic PPA-CF",
-    "OrcaFilamentLibrary/Generic PPA-CF",
-    "Tiertime/Generic PPA-CF"
-   ],
-   "name": "Generic PPA-CF",
-   "filament_type": "PPA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OF8wE5l7": {
-   "filaments": [
-    "Artillery/Artillery PETG Basic"
-   ],
-   "name": "Artillery PETG Basic",
-   "filament_type": "PETG Basic",
-   "filament_vendor": "Artillery"
-  },
-  "OF99UMPq": {
-   "filaments": [
-    "BBL/COEX ABS",
-    "OrcaFilamentLibrary/COEX ABS"
-   ],
-   "name": "COEX ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "COEX 3D"
-  },
-  "OF99vXPs": {
-   "filaments": [],
-   "name": "DREMC ABS+",
-   "filament_type": "ABS",
-   "filament_vendor": "DREMC"
-  },
-  "OF9EHUKK": {
-   "filaments": [
-    "Qidi/QIDI TPU-GF"
-   ],
-   "name": "QIDI TPU-GF",
-   "filament_type": "TPU-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OF9HCdyQ": {
-   "filaments": [
-    "Afinia/Afinia PLA"
-   ],
-   "name": "Afinia PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Afinia"
-  },
-  "OF9OlTWH": {
-   "filaments": [
-    "BBL/Bambu PLA Marble",
-    "OrcaFilamentLibrary/Bambu PLA Marble"
-   ],
-   "name": "Bambu PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OF9PELEb": {
-   "filaments": [
-    "Qidi/QIDI UltraPA-CF25"
-   ],
-   "name": "QIDI UltraPA-CF25",
-   "filament_type": "UltraPA-CF25",
-   "filament_vendor": "QIDI"
-  },
-  "OF9UJOGF": {
-   "filaments": [
-    "Anycubic/Anycubic PETG-CF"
-   ],
-   "name": "Anycubic PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OF9cAwMK": {
-   "filaments": [
-    "Flashforge/Flashforge PLA-CF"
-   ],
-   "name": "Flashforge PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OF9emAI9": {
-   "filaments": [
-    "Ratrig/RatRig PunkFil PETG"
-   ],
-   "name": "RatRig PunkFil PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "RatRig"
-  },
-  "OFA026vt": {
-   "filaments": [
-    "OrcaArena/Arena PA-CF"
-   ],
-   "name": "Arena PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFAC7Wyu": {
-   "filaments": [
-    "Artillery/Artillery PLA Matte"
-   ],
-   "name": "Artillery PLA Matte",
-   "filament_type": "PLA Matte",
-   "filament_vendor": "Artillery"
-  },
-  "OFAIBCLJ": {
-   "filaments": [
-    "Elegoo/Generic ABS-CF"
-   ],
-   "name": "Generic ABS-CF",
-   "filament_type": "ABS-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFAIrQXu": {
-   "filaments": [
-    "Creality/Creality Hyper PLA"
-   ],
-   "name": "Creality Hyper PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFANFm4x": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido Metal"
-   ],
-   "name": "QIDI PLA Rapido Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFAO9A7J": {
-   "filaments": [
-    "Sovol/Sovol Zero PLA Silk HS Nozzle"
-   ],
-   "name": "Sovol Zero PLA Silk HS Nozzle",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFAZllAN": {
-   "filaments": [
-    "Artillery/Artillery PLA-CF"
-   ],
-   "name": "Artillery PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Artillery"
-  },
-  "OFAc0Pr3": {
-   "filaments": [
-    "BBL/Fiberon PET-CF17"
-   ],
-   "name": "Fiberon PET-CF17",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFAcJkl1": {
-   "filaments": [
-    "BBL/addnorth PETG-CF Rigid X"
-   ],
-   "name": "addnorth PETG-CF Rigid X",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "addnorth"
-  },
-  "OFAebKg8": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Metal"
-   ],
-   "name": "Flashforge PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFAnyRUI": {
-   "filaments": [
-    "BBL/Bambu Support For PLA",
-    "OrcaFilamentLibrary/Bambu Support For PLA"
-   ],
-   "name": "Bambu Support For PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFAt6ec0": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Marron Oxido"
-   ],
-   "name": "FilAr PLA Marron Oxido",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFB5SmWk": {
-   "filaments": [
-    "OrcaFilamentLibrary/Valment PLA Galaxy"
-   ],
-   "name": "Valment PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Valment"
-  },
-  "OFBBgw7B": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Wood"
-   ],
-   "name": "WonderMaker PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFBJAdLw": {
-   "filaments": [
-    "LH/LHS PCTG"
-   ],
-   "name": "LHS PCTG",
-   "filament_type": "PCTG",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFBLktDy": {
-   "filaments": [
-    "Creality/Soleyin Basic PETG"
-   ],
-   "name": "Soleyin Basic PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Creality"
-  },
-  "OFBSW57R": {
-   "filaments": [
-    "BBL/Bambu PLA Aero",
-    "OrcaFilamentLibrary/Bambu PLA Aero"
-   ],
-   "name": "Bambu PLA Aero",
-   "filament_type": "PLA-AERO",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFBUIlZ7": {
-   "filaments": [
-    "Elegoo/Elegoo PLA+",
-    "OrcaFilamentLibrary/Elegoo PLA+"
-   ],
-   "name": "Elegoo PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFBlFMVp": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PETG"
-   ],
-   "name": "Snapmaker Dual PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFBoSWxb": {
-   "filaments": [
-    "BBL/PolyLite PLA Luminous",
-    "Snapmaker/PolyLite PLA Luminous"
-   ],
-   "name": "PolyLite PLA Luminous",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFBsbMMF": {
-   "filaments": [
-    "BBL/addnorth PA-CF Adura X"
-   ],
-   "name": "addnorth PA-CF Adura X",
-   "filament_type": "PA-CF",
-   "filament_vendor": "addnorth"
-  },
-  "OFBw6eEG": {
-   "filaments": [
-    "BBL/Overture Matte PLA",
-    "OrcaFilamentLibrary/Overture Matte PLA"
-   ],
-   "name": "Overture Matte PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFC1PzXz": {
-   "filaments": [
-    "Creality/Hyper Luminous"
-   ],
-   "name": "Hyper Luminous",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFC5f4Ay": {
-   "filaments": [
-    "RH3D/Generic PCCF"
-   ],
-   "name": "Generic PCCF",
-   "filament_type": "PC-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFC78WGQ": {
-   "filaments": [
-    "BBL/Panchroma PLA Starlight",
-    "OrcaFilamentLibrary/Panchroma PLA Starlight",
-    "Snapmaker/Panchroma PLA Starlight"
-   ],
-   "name": "Panchroma PLA Starlight",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFCD8qiU": {
-   "filaments": [
-    "BBL/Generic EVA",
-    "OrcaFilamentLibrary/Generic EVA",
-    "Tiertime/Generic EVA"
-   ],
-   "name": "Generic EVA",
-   "filament_type": "EVA",
-   "filament_vendor": "Generic"
-  },
-  "OFCIUsWh": {
-   "filaments": [
-    "BBL/Panchroma PLA Translucent",
-    "OrcaFilamentLibrary/Panchroma PLA Translucent",
-    "Snapmaker/Panchroma PLA Translucent"
-   ],
-   "name": "Panchroma PLA Translucent",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFCJpR7a": {
-   "filaments": [
-    "Creality/HP Ultra PLA"
-   ],
-   "name": "HP Ultra PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFCZsqXg": {
-   "filaments": [
-    "Creality/Hyper PLA"
-   ],
-   "name": "Hyper PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFCccVrQ": {
-   "filaments": [
-    "OrcaFilamentLibrary/PolyTerra Dual PLA",
-    "Snapmaker/PolyTerra Dual PLA"
-   ],
-   "name": "PolyTerra Dual PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFCidU7j": {
-   "filaments": [
-    "OrcaFilamentLibrary/DREMC ABS-GF"
-   ],
-   "name": "DREMC ABS-GF",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "DREMC"
-  },
-  "OFCjG251": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Verde"
-   ],
-   "name": "FilAr PLA-mate Verde",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFCn83wF": {
-   "filaments": [
-    "Flashforge/FusRock S-PAHT"
-   ],
-   "name": "FusRock S-PAHT",
-   "filament_type": "PAHT",
-   "filament_vendor": "FusRock"
-  },
-  "OFCnywiC": {
-   "filaments": [
-    "Tiertime/Tiertime PET-CF"
-   ],
-   "name": "Tiertime PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Tiertime"
-  },
-  "OFCoRobU": {
-   "filaments": [
-    "OrcaFilamentLibrary/Elas ASA"
-   ],
-   "name": "Elas ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Elas"
-  },
-  "OFCp3Bgo": {
-   "filaments": [
-    "Anycubic/Anycubic PLA SE"
-   ],
-   "name": "Anycubic PLA SE",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFCuaCer": {
-   "filaments": [
-    "Volumic/Désactivé"
-   ],
-   "name": "Désactivé",
-   "filament_type": "PLA",
-   "filament_vendor": "Volumic"
-  },
-  "OFD9taow": {
-   "filaments": [
-    "FlyingBear/FlyingBear PLA Hyper"
-   ],
-   "name": "FlyingBear PLA Hyper",
-   "filament_type": "PLA",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFDETOM6": {
-   "filaments": [
-    "Creality/eSUN PLA-Matte",
-    "OrcaFilamentLibrary/eSUN PLA-Matte"
-   ],
-   "name": "eSUN PLA-Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFDGigEI": {
-   "filaments": [
-    "BBL/Bambu PLA Dynamic",
-    "OrcaFilamentLibrary/Bambu PLA Dynamic"
-   ],
-   "name": "Bambu PLA Dynamic",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFDIrhbu": {
-   "filaments": [
-    "Qidi/QIDI PC/ABS-FR"
-   ],
-   "name": "QIDI PC/ABS-FR",
-   "filament_type": "PC-ABS-FR",
-   "filament_vendor": "QIDI"
-  },
-  "OFDJU6R3": {
-   "filaments": [
-    "Afinia/Afinia TPU"
-   ],
-   "name": "Afinia TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Afinia"
-  },
-  "OFDKIKyw": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PVA"
-   ],
-   "name": "Snapmaker Dual PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFDKgoqx": {
-   "filaments": [
-    "Flashforge/Flashforge PLA"
-   ],
-   "name": "Flashforge PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFDRpXLZ": {
-   "filaments": [
-    "FlyingBear/Other PETG",
-    "InfiMech/Other PETG"
-   ],
-   "name": "Other PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Other"
-  },
-  "OFDSrzZ8": {
-   "filaments": [
-    "Anker/Generic PLA",
-    "Anycubic/Generic PLA",
-    "Artillery/Generic PLA",
-    "BBL/Generic PLA",
-    "Blocks/Generic PLA",
-    "CONSTRUCT3D/Generic PLA",
-    "Chuanying/Generic PLA",
-    "Co Print/Generic PLA",
-    "CoLiDo/Generic PLA",
-    "Comgrow/Generic PLA",
-    "Creality/Generic PLA",
-    "Custom/Generic PLA",
-    "DeltaMaker/Generic PLA",
-    "Dremel/Generic PLA",
-    "Elegoo/Generic PLA",
-    "FLSun/Generic PLA",
-    "Flashforge/Generic PLA",
-    "FlyingBear/Generic PLA",
-    "Ginger Additive/Generic PLA",
-    "InfiMech/Generic PLA",
-    "LONGER/Generic PLA",
-    "Lulzbot/Generic PLA",
-    "OrcaArena/Generic PLA",
-    "OrcaFilamentLibrary/Generic PLA",
-    "Peopoly/Generic PLA",
-    "Phrozen/Generic PLA",
-    "Prusa/Generic PLA",
-    "Qidi/Generic PLA",
-    "RH3D/Generic PLA",
-    "Ratrig/Generic PLA",
-    "SecKit/Generic PLA",
-    "Sovol/Generic PLA",
-    "Tiertime/Generic PLA",
-    "Vzbot/Generic PLA",
-    "Z-Bolt/Generic PLA"
-   ],
-   "name": "Generic PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFDe8uyM": {
-   "filaments": [
-    "OrcaFilamentLibrary/Valment PLA"
-   ],
-   "name": "Valment PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Valment"
-  },
-  "OFDgQaca": {
-   "filaments": [
-    "FlyingBear/FlyingBear PETG"
-   ],
-   "name": "FlyingBear PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFDpW3J8": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PLA Basic"
-   ],
-   "name": "FILL3D PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "FILL3D"
-  },
-  "OFDtop41": {
-   "filaments": [
-    "Creality/Generic Support for PA"
-   ],
-   "name": "Generic Support for PA",
-   "filament_type": "PA",
-   "filament_vendor": "Generic"
-  },
-  "OFDu1qE7": {
-   "filaments": [
-    "Flashforge/FusRock PET-CF"
-   ],
-   "name": "FusRock PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "FusRock"
-  },
-  "OFDvXujf": {
-   "filaments": [
-    "Anker/Generic PVA",
-    "Anycubic/Generic PVA",
-    "BBL/Generic PVA",
-    "Blocks/Generic PVA",
-    "Chuanying/Generic PVA",
-    "Creality/Generic PVA",
-    "Custom/Generic PVA",
-    "FLSun/Generic PVA",
-    "Flashforge/Generic PVA",
-    "OrcaArena/Generic PVA",
-    "OrcaFilamentLibrary/Generic PVA",
-    "Prusa/Generic PVA",
-    "Qidi/Generic PVA",
-    "Ratrig/Generic PVA",
-    "SecKit/Generic PVA",
-    "Tiertime/Generic PVA",
-    "Vzbot/Generic PVA"
-   ],
-   "name": "Generic PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Generic"
-  },
-  "OFDvqJ6n": {
-   "filaments": [
-    "OrcaFilamentLibrary/Overture ABS Basic"
-   ],
-   "name": "Overture ABS Basic",
-   "filament_type": "ABS",
-   "filament_vendor": "Overture"
-  },
-  "OFDwBwO5": {
-   "filaments": [
-    "Prusa/Generic PVA HF"
-   ],
-   "name": "Generic PVA HF",
-   "filament_type": "PVA",
-   "filament_vendor": "Generic"
-  },
-  "OFDxfPgH": {
-   "filaments": [
-    "BBL/Bambu PLA Sparkle",
-    "OrcaFilamentLibrary/Bambu PLA Sparkle"
-   ],
-   "name": "Bambu PLA Sparkle",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFDxxTpW": {
-   "filaments": [
-    "Flashforge/Flashforge HS PETG"
-   ],
-   "name": "Flashforge HS PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Flashforge"
-  },
-  "OFE0NFRh": {
-   "filaments": [
-    "BBL/COEX TPU 60A",
-    "OrcaFilamentLibrary/COEX TPU 60A"
-   ],
-   "name": "COEX TPU 60A",
-   "filament_type": "TPU",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFEGNJD4": {
-   "filaments": [
-    "BBL/Bambu PLA Silk",
-    "OrcaFilamentLibrary/Bambu PLA Silk"
-   ],
-   "name": "Bambu PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFEOnBj6": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Lite"
-   ],
-   "name": "Snapmaker PLA Lite",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFEWYR89": {
-   "filaments": [
-    "Anker/Generic PLA+",
-    "Qidi/Generic PLA+"
-   ],
-   "name": "Generic PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFEZ449N": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Uva"
-   ],
-   "name": "FilAr PLA-mate Uva",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFEZpel7": {
-   "filaments": [
-    "Volumic/PPS Carbone (Performance)"
-   ],
-   "name": "PPS Carbone (Performance)",
-   "filament_type": "PPS-CF",
-   "filament_vendor": "Volumic"
-  },
-  "OFEabreg": {
-   "filaments": [
-    "Anycubic/Fiberon PA6-CF20",
-    "BBL/Fiberon PA6-CF20",
-    "Snapmaker/Fiberon PA6-CF20"
-   ],
-   "name": "Fiberon PA6-CF20",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFEbIx49": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Marble"
-   ],
-   "name": "WonderMaker PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFEhuUNq": {
-   "filaments": [],
-   "name": "DREMC PA12-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "DREMC"
-  },
-  "OFEj7sca": {
-   "filaments": [
-    "Cubicon/Cubicon PC"
-   ],
-   "name": "Cubicon PC",
-   "filament_type": "PC",
-   "filament_vendor": "Cubicon"
-  },
-  "OFEjbwqG": {
-   "filaments": [
-    "BBL/PolyTerra PLA+",
-    "Snapmaker/PolyTerra PLA+"
-   ],
-   "name": "PolyTerra PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFEkPBwx": {
-   "filaments": [
-    "BBL/Bambu PLA Glow",
-    "OrcaFilamentLibrary/Bambu PLA Glow"
-   ],
-   "name": "Bambu PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFEmsric": {
-   "filaments": [
-    "Snapmaker/Snapmaker PA-CF"
-   ],
-   "name": "Snapmaker PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFEnbt6D": {
-   "filaments": [
-    "Peopoly/Peopoly Lancer PLA-C"
-   ],
-   "name": "Peopoly Lancer PLA-C",
-   "filament_type": "PLA",
-   "filament_vendor": "Peopoly"
-  },
-  "OFEswT5W": {
-   "filaments": [
-    "BBL/Bambu PLA-CF",
-    "OrcaFilamentLibrary/Bambu PLA-CF"
-   ],
-   "name": "Bambu PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFEvEfw5": {
-   "filaments": [
-    "Flashforge/Flashforge PA"
-   ],
-   "name": "Flashforge PA",
-   "filament_type": "PA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFEwRwmL": {
-   "filaments": [
-    "Cubicon/Cubicon PLA"
-   ],
-   "name": "Cubicon PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Cubicon"
-  },
-  "OFF3cuzT": {
-   "filaments": [
-    "Creality/Generic TPU 64D"
-   ],
-   "name": "Generic TPU 64D",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OFF5o7b2": {
-   "filaments": [
-    "BBL/BETA PLA Youth"
-   ],
-   "name": "BETA PLA Youth",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFF9OKoY": {
-   "filaments": [
-    "BBL/PolyLite PLA Pro",
-    "OrcaFilamentLibrary/PolyLite PLA Pro",
-    "Snapmaker/PolyLite PLA Pro"
-   ],
-   "name": "PolyLite PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFF9cgY5": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Matte"
-   ],
-   "name": "Snapmaker PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFFAWVf0": {
-   "filaments": [
-    "Qidi/QIDI PC-ABS-FR"
-   ],
-   "name": "QIDI PC-ABS-FR",
-   "filament_type": "PC-ABS-FR",
-   "filament_vendor": "QIDI"
-  },
-  "OFFFg2Pf": {
-   "filaments": [
-    "Flashforge/Flashforge ASA Basic"
-   ],
-   "name": "Flashforge ASA Basic",
-   "filament_type": "ASA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFFNYwWR": {
-   "filaments": [
-    "BBL/Bambu PA-CF",
-    "OrcaFilamentLibrary/Bambu PA-CF"
-   ],
-   "name": "Bambu PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFFP4ORR": {
-   "filaments": [
-    "Creality/Creality Hyper ABS"
-   ],
-   "name": "Creality Hyper ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Creality"
-  },
-  "OFFX1DRD": {
-   "filaments": [
-    "FlyingBear/FlyingBear PC"
-   ],
-   "name": "FlyingBear PC",
-   "filament_type": "PC",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFFZ458u": {
-   "filaments": [
-    "Snapmaker/Fiberon PA612-ESD"
-   ],
-   "name": "Fiberon PA612-ESD",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFFbQscs": {
-   "filaments": [
-    "Creality/eSUN PETG-Basic"
-   ],
-   "name": "eSUN PETG-Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "eSUN"
-  },
-  "OFFbSnCD": {
-   "filaments": [
-    "BBL/Bambu PLA Translucent"
-   ],
-   "name": "Bambu PLA Translucent",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFFfJ09N": {
-   "filaments": [
-    "BBL/BETA PETG Glow"
-   ],
-   "name": "BETA PETG Glow",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFFkCLBl": {
-   "filaments": [
-    "BBL/Panchroma PLA Galaxy",
-    "OrcaFilamentLibrary/Panchroma PLA Galaxy",
-    "Snapmaker/Panchroma PLA Galaxy"
-   ],
-   "name": "Panchroma PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFFvzqcd": {
-   "filaments": [
-    "BBL/Bambu PETG Basic",
-    "OrcaFilamentLibrary/Bambu PETG Basic"
-   ],
-   "name": "Bambu PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFFwJWea": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Silk"
-   ],
-   "name": "Anycubic PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFG0kOKX": {
-   "filaments": [
-    "Volumic/Volumic PETG Ultra"
-   ],
-   "name": "Volumic PETG Ultra",
-   "filament_type": "PETG",
-   "filament_vendor": "Volumic"
-  },
-  "OFG2RkhN": {
-   "filaments": [
-    "Creality/CR-TPU"
-   ],
-   "name": "CR-TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Creality"
-  },
-  "OFG4do34": {
-   "filaments": [
-    "Qidi/Qidi ASA-Aero"
-   ],
-   "name": "Qidi ASA-Aero",
-   "filament_type": "ASA-AERO",
-   "filament_vendor": "QIDI"
-  },
-  "OFGJ1nxs": {
-   "filaments": [
-    "FlyingBear/Other PLA",
-    "InfiMech/Other PLA"
-   ],
-   "name": "Other PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Other"
-  },
-  "OFGVwfK0": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Gris"
-   ],
-   "name": "FilAr PLA-mate Gris",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFGVxj2A": {
-   "filaments": [
-    "BBL/BETA PLA Wood"
-   ],
-   "name": "BETA PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFGc9l16": {
-   "filaments": [
-    "BBL/BETA PLA Glow"
-   ],
-   "name": "BETA PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFGcLA5R": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Beige"
-   ],
-   "name": "FilAr PLA-mate Beige",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFGcMkEB": {
-   "filaments": [
-    "Creality/HP-TPU"
-   ],
-   "name": "HP-TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Creality"
-  },
-  "OFGdP6Na": {
-   "filaments": [
-    "Volumic/Volumic PVA"
-   ],
-   "name": "Volumic PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Volumic"
-  },
-  "OFGkyftV": {
-   "filaments": [
-    "BBL/Overture Silk PLA",
-    "OrcaFilamentLibrary/Overture Silk PLA"
-   ],
-   "name": "Overture Silk PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFGwT5Av": {
-   "filaments": [
-    "Creality/Creality Hyper PLA-CF"
-   ],
-   "name": "Creality Hyper PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFGwZmgS": {
-   "filaments": [
-    "Creality/CR-ABS"
-   ],
-   "name": "CR-ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Creality"
-  },
-  "OFGxC8gB": {
-   "filaments": [
-    "Creality/CR-Wood"
-   ],
-   "name": "CR-Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFGxuI0n": {
-   "filaments": [
-    "Flashforge/Flashforge PA-CF"
-   ],
-   "name": "Flashforge PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFH2nN08": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA INGEO 850"
-   ],
-   "name": "Eolas Prints PLA INGEO 850",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFH57ibH": {
-   "filaments": [
-    "Snapmaker/Polymaker Silk PLA Family"
-   ],
-   "name": "Polymaker Silk PLA Family",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFH7b12v": {
-   "filaments": [
-    "Creality/Generic PAHT-CF"
-   ],
-   "name": "Generic PAHT-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFHAccHz": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Blanco Antartida"
-   ],
-   "name": "FilAr PLA Blanco Antartida",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFHHwrd1": {
-   "filaments": [
-    "BBL/addnorth PETG Base"
-   ],
-   "name": "addnorth PETG Base",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OFHWSM21": {
-   "filaments": [
-    "BBL/Fiberon PET-CF",
-    "OrcaFilamentLibrary/Fiberon PET-CF"
-   ],
-   "name": "Fiberon PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFHa48An": {
-   "filaments": [
-    "BBL/Bambu PET-CF",
-    "OrcaFilamentLibrary/Bambu PET-CF"
-   ],
-   "name": "Bambu PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFHaYaB1": {
-   "filaments": [
-    "Creality/eSUN PET-Basic"
-   ],
-   "name": "eSUN PET-Basic",
-   "filament_type": "PET",
-   "filament_vendor": "eSUN"
-  },
-  "OFHf2lKK": {
-   "filaments": [
-    "FlyingBear/FlyingBear TPU Basic"
-   ],
-   "name": "FlyingBear TPU Basic",
-   "filament_type": "TPU",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFHfzQXo": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Transition"
-   ],
-   "name": "Eolas Prints PLA Transition",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFHknN4v": {
-   "filaments": [
-    "Anycubic/Polymaker PLA Pro Metallic",
-    "Snapmaker/Polymaker PLA Pro Metallic"
-   ],
-   "name": "Polymaker PLA Pro Metallic",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFHmPYRy": {
-   "filaments": [
-    "BBL/SUNLU PLA+ 2.0",
-    "Flashforge/SUNLU PLA+ 2.0",
-    "OrcaFilamentLibrary/SUNLU PLA+ 2.0"
-   ],
-   "name": "SUNLU PLA+ 2.0",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFI2MKy7": {
-   "filaments": [
-    "BBL/BETA PEBA 90A"
-   ],
-   "name": "BETA PEBA 90A",
-   "filament_type": "TPU",
-   "filament_vendor": "BETA"
-  },
-  "OFI6WZpn": {
-   "filaments": [
-    "OrcaArena/Arena Support W"
-   ],
-   "name": "Arena Support W",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFIBXa0k": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Rojo"
-   ],
-   "name": "FilAr PLA-mate Rojo",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFIBbYO5": {
-   "filaments": [
-    "BBL/Bambu TPU for AMS"
-   ],
-   "name": "Bambu TPU for AMS",
-   "filament_type": "TPU-AMS",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFIE3vOf": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Matte"
-   ],
-   "name": "Anycubic PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFIK2H3G": {
-   "filaments": [
-    "Flashforge/Flashforge HS PLA"
-   ],
-   "name": "Flashforge HS PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFIKZxPF": {
-   "filaments": [
-    "Creality/Generic PLA Wood"
-   ],
-   "name": "Generic PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFIPjqHt": {
-   "filaments": [
-    "OrcaArena/Arena Support G"
-   ],
-   "name": "Arena Support G",
-   "filament_type": "PA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFIRUqWi": {
-   "filaments": [
-    "Creality/eSUN PLA-Silk"
-   ],
-   "name": "eSUN PLA-Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFIVWJPm": {
-   "filaments": [
-    "InfiMech/InfiMech TPU"
-   ],
-   "name": "InfiMech TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "InfiMech"
-  },
-  "OFIWMSGX": {
-   "filaments": [
-    "Qidi/HATCHBOX PETG"
-   ],
-   "name": "HATCHBOX PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "HATCHBOX"
-  },
-  "OFIZMQwM": {
-   "filaments": [
-    "LH/LHS TPU"
-   ],
-   "name": "LHS TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFIamQnD": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Gris Ceniza"
-   ],
-   "name": "FilAr PLA Gris Ceniza",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFIegjmD": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints TPU Flex D53"
-   ],
-   "name": "Eolas Prints TPU Flex D53",
-   "filament_type": "TPU",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFIfnzxC": {
-   "filaments": [
-    "BBL/Bambu Support For PLA/PETG",
-    "OrcaFilamentLibrary/Bambu Support For PLA/PETG"
-   ],
-   "name": "Bambu Support For PLA/PETG",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFIgbDHq": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Luminous"
-   ],
-   "name": "Anycubic PLA Luminous",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFIxOuOu": {
-   "filaments": [
-    "BBL/PolyLite PLA Starlight",
-    "Snapmaker/PolyLite PLA Starlight"
-   ],
-   "name": "PolyLite PLA Starlight",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFJ3F2jm": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Basic"
-   ],
-   "name": "Flashforge PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFJ3HRsR": {
-   "filaments": [
-    "OrcaArena/Arena ABS"
-   ],
-   "name": "Arena ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFJHBEGD": {
-   "filaments": [],
-   "name": "DREMC PLA+ HS",
-   "filament_type": "PLA",
-   "filament_vendor": "DREMC"
-  },
-  "OFJJ0Ar3": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Galaxy"
-   ],
-   "name": "Flashforge PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFJNeELv": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PA"
-   ],
-   "name": "FILL3D PA",
-   "filament_type": "PA",
-   "filament_vendor": "FILL3D"
-  },
-  "OFJOFnOZ": {
-   "filaments": [
-    "BBL/AliZ PETG-CF",
-    "OrcaFilamentLibrary/AliZ PETG-CF"
-   ],
-   "name": "AliZ PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Aliz"
-  },
-  "OFJQDUk3": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Cristal"
-   ],
-   "name": "FilAr PETG Cristal",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFJS560n": {
-   "filaments": [],
-   "name": "Flashforge ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFJWKoYG": {
-   "filaments": [
-    "iQ/Material4Print ABS Natur P1"
-   ],
-   "name": "Material4Print ABS Natur P1",
-   "filament_type": "ABS Material4Print Natur",
-   "filament_vendor": "iQ Materials"
-  },
-  "OFJYpVAQ": {
-   "filaments": [
-    "Flashforge/Generic TPU-90A"
-   ],
-   "name": "Generic TPU-90A",
-   "filament_type": "TPU-90A",
-   "filament_vendor": "Generic"
-  },
-  "OFJgijky": {
-   "filaments": [
-    "BBL/PolyLite CosPLA",
-    "Snapmaker/PolyLite CosPLA"
-   ],
-   "name": "PolyLite CosPLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFJhT2fd": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual ABS"
-   ],
-   "name": "Snapmaker Dual ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFJnEaCp": {
-   "filaments": [
-    "BBL/BETA PLA Transparent"
-   ],
-   "name": "BETA PLA Transparent",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFJrvXth": {
-   "filaments": [
-    "Snapmaker/Snapmaker ABS Benchy"
-   ],
-   "name": "Snapmaker ABS Benchy",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFJs1ToM": {
-   "filaments": [
-    "BBL/COEX NYLEX UNFILLED"
-   ],
-   "name": "COEX NYLEX UNFILLED",
-   "filament_type": "PA",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFJu1XwK": {
-   "filaments": [
-    "OrcaFilamentLibrary/NIT PETG"
-   ],
-   "name": "NIT PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "NIT"
-  },
-  "OFJxSqO4": {
-   "filaments": [
-    "Wanhao France/YUMI PLA Direct Drive"
-   ],
-   "name": "YUMI PLA Direct Drive",
-   "filament_type": "PLA",
-   "filament_vendor": "Yumi"
-  },
-  "OFK7830e": {
-   "filaments": [
-    "BBL/BETA TPU 95A"
-   ],
-   "name": "BETA TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "BETA"
-  },
-  "OFK8XHPn": {
-   "filaments": [
-    "Qidi/Overture ABS"
-   ],
-   "name": "Overture ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Overture"
-  },
-  "OFKIQO2W": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido"
-   ],
-   "name": "QIDI PLA Rapido",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFKKajh6": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Gris Plata"
-   ],
-   "name": "FilAr PLA Gris Plata",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFKTGKJU": {
-   "filaments": [
-    "Flashforge/FusRock PET"
-   ],
-   "name": "FusRock PET",
-   "filament_type": "PET",
-   "filament_vendor": "FusRock"
-  },
-  "OFKTSiYF": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Blanco Calido"
-   ],
-   "name": "FilAr PLA Blanco Calido",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFKUEXPA": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual ASA"
-   ],
-   "name": "Snapmaker Dual ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFKW5hEW": {
-   "filaments": [
-    "Flashforge/FusRock PAHT-CF"
-   ],
-   "name": "FusRock PAHT-CF",
-   "filament_type": "PAHT-CF",
-   "filament_vendor": "FusRock"
-  },
-  "OFKWWgyp": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Carpincho"
-   ],
-   "name": "FilAr PLA Carpincho",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFKYBAWe": {
-   "filaments": [
-    "BBL/BETA PLA Marble"
-   ],
-   "name": "BETA PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFKZ9skj": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Naranja Tigre"
-   ],
-   "name": "FilAr PLA Naranja Tigre",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFKbdiiJ": {
-   "filaments": [
-    "Creality/PolySonic PLA Pro"
-   ],
-   "name": "PolySonic PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFKfJTwL": {
-   "filaments": [
-    "Qidi/QIDI PET-CF"
-   ],
-   "name": "QIDI PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFKgmsqE": {
-   "filaments": [
-    "Qidi/QIDI PAHT-CF"
-   ],
-   "name": "QIDI PAHT-CF",
-   "filament_type": "PAHT-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFKhMPeX": {
-   "filaments": [
-    "BBL/Bambu PC",
-    "OrcaFilamentLibrary/Bambu PC"
-   ],
-   "name": "Bambu PC",
-   "filament_type": "PC",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFKiSMWR": {
-   "filaments": [
-    "BBL/Panchroma PLA Marble",
-    "OrcaFilamentLibrary/Panchroma PLA Marble",
-    "Snapmaker/Panchroma PLA Marble"
-   ],
-   "name": "Panchroma PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFKyNkQz": {
-   "filaments": [
-    "BBL/BETA PETG UV Color Change"
-   ],
-   "name": "BETA PETG UV Color Change",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFL9aRjN": {
-   "filaments": [
-    "Snapmaker/Snapmaker PETG HF"
-   ],
-   "name": "Snapmaker PETG HF",
-   "filament_type": "PETG",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFLAXKqP": {
-   "filaments": [
-    "WonderMaker/WonderMaker TPU 95A"
-   ],
-   "name": "WonderMaker TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFLC1oRH": {
-   "filaments": [
-    "Flashforge/Flashforge PPA-CF"
-   ],
-   "name": "Flashforge PPA-CF",
-   "filament_type": "PPA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFLJ8S6I": {
-   "filaments": [
-    "BBL/SUNLU Wood PLA",
-    "Flashforge/SUNLU Wood PLA",
-    "OrcaFilamentLibrary/SUNLU Wood PLA"
-   ],
-   "name": "SUNLU Wood PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFLNgV3C": {
-   "filaments": [],
-   "name": "DREMC ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "DREMC"
-  },
-  "OFLOf6Sc": {
-   "filaments": [
-    "Tiertime/Tiertime TPU 95A"
-   ],
-   "name": "Tiertime TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Tiertime"
-  },
-  "OFLPAxz3": {
-   "filaments": [
-    "Anker/Generic ASA",
-    "Anycubic/Generic ASA",
-    "Artillery/Generic ASA",
-    "BBL/Generic ASA",
-    "Blocks/Generic ASA",
-    "Chuanying/Generic ASA",
-    "Creality/Generic ASA",
-    "Custom/Generic ASA",
-    "Elegoo/Generic ASA",
-    "FLSun/Generic ASA",
-    "Flashforge/Generic ASA",
-    "OrcaArena/Generic ASA",
-    "OrcaFilamentLibrary/Generic ASA",
-    "Prusa/Generic ASA",
-    "Qidi/Generic ASA",
-    "RH3D/Generic ASA",
-    "Ratrig/Generic ASA",
-    "SecKit/Generic ASA",
-    "Tiertime/Generic ASA",
-    "Vzbot/Generic ASA"
-   ],
-   "name": "Generic ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Generic"
-  },
-  "OFLTYJW0": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Translucent"
-   ],
-   "name": "Snapmaker PLA Translucent",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFLXvuMr": {
-   "filaments": [
-    "Elegoo/Elegoo Rapid PETG",
-    "OrcaFilamentLibrary/Elegoo Rapid PETG"
-   ],
-   "name": "Elegoo Rapid PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFLYDngx": {
-   "filaments": [
-    "Qidi/Bambu PETG"
-   ],
-   "name": "Bambu PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFLakOUI": {
-   "filaments": [
-    "Anker/Generic PC",
-    "Anycubic/Generic PC",
-    "BBL/Generic PC",
-    "Blocks/Generic PC",
-    "Creality/Generic PC",
-    "Custom/Generic PC",
-    "Elegoo/Generic PC",
-    "FLSun/Generic PC",
-    "FlyingBear/Generic PC",
-    "InfiMech/Generic PC",
-    "OrcaArena/Generic PC",
-    "OrcaFilamentLibrary/Generic PC",
-    "Prusa/Generic PC",
-    "Qidi/Generic PC",
-    "Ratrig/Generic PC",
-    "SecKit/Generic PC",
-    "Sovol/Generic PC",
-    "Tiertime/Generic PC",
-    "Vzbot/Generic PC"
-   ],
-   "name": "Generic PC",
-   "filament_type": "PC",
-   "filament_vendor": "Generic"
-  },
-  "OFLbXwoL": {
-   "filaments": [
-    "Artillery/Artillery PLA Silk"
-   ],
-   "name": "Artillery PLA Silk",
-   "filament_type": "PLA Silk",
-   "filament_vendor": "Artillery"
-  },
-  "OFLbdkrE": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA Eco"
-   ],
-   "name": "Snapmaker J1 PLA Eco",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFLcd093": {
-   "filaments": [
-    "Elegoo/Elegoo PETG",
-    "OrcaFilamentLibrary/Elegoo PETG"
-   ],
-   "name": "Elegoo PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFLfywkp": {
-   "filaments": [
-    "Afinia/Afinia ABS+"
-   ],
-   "name": "Afinia ABS+",
-   "filament_type": "ABS",
-   "filament_vendor": "Afinia"
-  },
-  "OFLgwqp2": {
-   "filaments": [
-    "Creality/Hyper PETG-GF"
-   ],
-   "name": "Hyper PETG-GF",
-   "filament_type": "PETG-GF",
-   "filament_vendor": "Creality"
-  },
-  "OFLjDYxH": {
-   "filaments": [
-    "BBL/addnorth PLA X-PLA High Speed"
-   ],
-   "name": "addnorth PLA X-PLA High Speed",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFLqgSuX": {
-   "filaments": [
-    "BBL/BETA PLA-CF"
-   ],
-   "name": "BETA PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "BETA"
-  },
-  "OFLzx3J4": {
-   "filaments": [
-    "Creality/Hyper Marble"
-   ],
-   "name": "Hyper Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFM0xjBG": {
-   "filaments": [
-    "Creality/CR-PLA Matte"
-   ],
-   "name": "CR-PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFM4iJlv": {
-   "filaments": [
-    "Creality/Generic PA12-CF"
-   ],
-   "name": "Generic PA12-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFM91vZs": {
-   "filaments": [
-    "BBL/Overture ASA",
-    "OrcaFilamentLibrary/Overture ASA"
-   ],
-   "name": "Overture ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Overture"
-  },
-  "OFMDHOcT": {
-   "filaments": [
-    "Qidi/QIDI TPU-Aero"
-   ],
-   "name": "QIDI TPU-Aero",
-   "filament_type": "TPU-AERO",
-   "filament_vendor": "QIDI"
-  },
-  "OFMK5gVo": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Basic"
-   ],
-   "name": "WonderMaker PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFML2aVd": {
-   "filaments": [
-    "Anycubic/Anycubic TPU 95A"
-   ],
-   "name": "Anycubic TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Anycubic"
-  },
-  "OFMSvS8z": {
-   "filaments": [
-    "Artillery/Artillery PA"
-   ],
-   "name": "Artillery PA",
-   "filament_type": "PA",
-   "filament_vendor": "Artillery"
-  },
-  "OFMTK0UC": {
-   "filaments": [
-    "BBL/Bambu Support For PA/PET",
-    "OrcaFilamentLibrary/Bambu Support For PA/PET"
-   ],
-   "name": "Bambu Support For PA/PET",
-   "filament_type": "PA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFMUWNkp": {
-   "filaments": [
-    "BBL/SUNLU PLA+",
-    "Flashforge/SUNLU PLA+",
-    "OrcaFilamentLibrary/SUNLU PLA+"
-   ],
-   "name": "SUNLU PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFMZvH0z": {
-   "filaments": [
-    "BBL/Overture Rock PLA",
-    "OrcaFilamentLibrary/Overture Rock PLA"
-   ],
-   "name": "Overture Rock PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFMjtqTC": {
-   "filaments": [
-    "BBL/Bambu PLA Wood",
-    "OrcaFilamentLibrary/Bambu PLA Wood"
-   ],
-   "name": "Bambu PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFMkAW6r": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Color Change"
-   ],
-   "name": "Flashforge PLA Color Change",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFMpxamb": {
-   "filaments": [
-    "Flashforge/Flashforge PETG"
-   ],
-   "name": "Flashforge PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Flashforge"
-  },
-  "OFMsDGbs": {
-   "filaments": [
-    "Anycubic/Anycubic TPU"
-   ],
-   "name": "Anycubic TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Anycubic"
-  },
-  "OFMuXBmO": {
-   "filaments": [
-    "OrcaFilamentLibrary/Elas PLA Basic"
-   ],
-   "name": "Elas PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Elas"
-  },
-  "OFMzRg65": {
-   "filaments": [
-    "BBL/BETA PLA PRO"
-   ],
-   "name": "BETA PLA PRO",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFN8QBhu": {
-   "filaments": [
-    "BBL/addnorth PLA Wood"
-   ],
-   "name": "addnorth PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFNBlAPT": {
-   "filaments": [
-    "OrcaArena/Arena PETG Basic"
-   ],
-   "name": "Arena PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFNGTH3w": {
-   "filaments": [
-    "Tiertime/Tiertime PLA"
-   ],
-   "name": "Tiertime PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Tiertime"
-  },
-  "OFNQKF0M": {
-   "filaments": [
-    "Tiertime/Tiertime ABS"
-   ],
-   "name": "Tiertime ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Tiertime"
-  },
-  "OFNSYu5h": {
-   "filaments": [
-    "Volumic/Volumic PP Ultra (Performance)"
-   ],
-   "name": "Volumic PP Ultra (Performance)",
-   "filament_type": "PP",
-   "filament_vendor": "Volumic"
-  },
-  "OFNU9YIW": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Azul Boreal"
-   ],
-   "name": "FilAr PETG Azul Boreal",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFNemJM6": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Cobre"
-   ],
-   "name": "FilAr PLA Cobre",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFNjku08": {
-   "filaments": [
-    "CONSTRUCT3D/Generic High Flow PETG"
-   ],
-   "name": "Generic High Flow PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OFNk8AvA": {
-   "filaments": [
-    "BBL/BETA PETG Gradient"
-   ],
-   "name": "BETA PETG Gradient",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFNk8bxk": {
-   "filaments": [
-    "BBL/Bambu PA6-GF",
-    "OrcaFilamentLibrary/Bambu PA6-GF"
-   ],
-   "name": "Bambu PA6-GF",
-   "filament_type": "PA-GF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFNstOna": {
-   "filaments": [
-    "Eryone/Eryone PETG-CF"
-   ],
-   "name": "Eryone PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFNvBIL0": {
-   "filaments": [
-    "Creality/Hyper PPA-CF"
-   ],
-   "name": "Hyper PPA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFO1GEq6": {
-   "filaments": [
-    "BBL/Panchroma PLA Neon",
-    "OrcaFilamentLibrary/Panchroma PLA Neon",
-    "Snapmaker/Panchroma PLA Neon"
-   ],
-   "name": "Panchroma PLA Neon",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFO5djrM": {
-   "filaments": [
-    "Chuanying/Generic PETG-CF10",
-    "Flashforge/Generic PETG-CF10"
-   ],
-   "name": "Generic PETG-CF10",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFO6GMJ3": {
-   "filaments": [
-    "BBL/addnorth TPU EasyFlex"
-   ],
-   "name": "addnorth TPU EasyFlex",
-   "filament_type": "TPU",
-   "filament_vendor": "addnorth"
-  },
-  "OFOABq7t": {
-   "filaments": [
-    "BBL/AliZ PETG-Metal",
-    "OrcaFilamentLibrary/AliZ PETG-Metal"
-   ],
-   "name": "AliZ PETG-Metal",
-   "filament_type": "PETG",
-   "filament_vendor": "Aliz"
-  },
-  "OFOAdMCB": {
-   "filaments": [
-    "OrcaArena/Arena PLA Metal"
-   ],
-   "name": "Arena PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFOHOf2F": {
-   "filaments": [
-    "Creality/eSUN PLA-HS"
-   ],
-   "name": "eSUN PLA-HS",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFOJPAAS": {
-   "filaments": [
-    "iQ/VXL90 TiQ2 P2"
-   ],
-   "name": "VXL90 TiQ2 P2",
-   "filament_type": "VXL90 Xioneer",
-   "filament_vendor": "iQ Materials"
-  },
-  "OFOPU1xv": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Full Spectrum"
-   ],
-   "name": "Snapmaker PLA Full Spectrum",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFOQCfVa": {
-   "filaments": [
-    "BBL/addnorth PLA Premium Silk"
-   ],
-   "name": "addnorth PLA Premium Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFObG16Q": {
-   "filaments": [
-    "InfiMech/InfiMech PLA Basic"
-   ],
-   "name": "InfiMech PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "InfiMech"
-  },
-  "OFObyktP": {
-   "filaments": [
-    "Tiertime/Tiertime PETG"
-   ],
-   "name": "Tiertime PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Tiertime"
-  },
-  "OFOiJfLM": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PETG CF"
-   ],
-   "name": "FILL3D PETG CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "FILL3D"
-  },
-  "OFOnSNt3": {
-   "filaments": [
-    "Artillery/Artillery PETG-CF"
-   ],
-   "name": "Artillery PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Artillery"
-  },
-  "OFOsHDnB": {
-   "filaments": [
-    "Elegoo/Elegoo PETG PRO",
-    "OrcaFilamentLibrary/Elegoo PETG PRO"
-   ],
-   "name": "Elegoo PETG PRO",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFOuEEvv": {
-   "filaments": [
-    "Qidi/QIDI ABS Rapido 0.2 nozzle"
-   ],
-   "name": "QIDI ABS Rapido 0.2 nozzle",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OFOvv91M": {
-   "filaments": [
-    "BBL/PolyLite ABS",
-    "OrcaFilamentLibrary/PolyLite ABS",
-    "Qidi/PolyLite ABS"
-   ],
-   "name": "PolyLite ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Polymaker"
-  },
-  "OFOwQuZM": {
-   "filaments": [
-    "Snapmaker/Snapmaker PETG-CF"
-   ],
-   "name": "Snapmaker PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFOzwywz": {
-   "filaments": [
-    "Eryone/Eryone ABS"
-   ],
-   "name": "Eryone ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Eryone"
-  },
-  "OFP26zNb": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Violeta Jacaranda"
-   ],
-   "name": "FilAr PLA Violeta Jacaranda",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFPHLnoe": {
-   "filaments": [
-    "Creality/HP-ASA"
-   ],
-   "name": "HP-ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Creality"
-  },
-  "OFPWPlSC": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PP"
-   ],
-   "name": "FILL3D PP",
-   "filament_type": "PP",
-   "filament_vendor": "FILL3D"
-  },
-  "OFPYDWgC": {
-   "filaments": [
-    "Peopoly/Peopoly Lancer PET-CF"
-   ],
-   "name": "Peopoly Lancer PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Peopoly"
-  },
-  "OFPbyOSk": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Rojo Carmesi"
-   ],
-   "name": "FilAr PETG Rojo Carmesi",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFPc4zVY": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA INGEO 870"
-   ],
-   "name": "Eolas Prints PLA INGEO 870",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFPkCJKE": {
-   "filaments": [
-    "BBL/Panchroma PLA Satin",
-    "Creality/Panchroma PLA Satin",
-    "OrcaFilamentLibrary/Panchroma PLA Satin",
-    "Snapmaker/Panchroma PLA Satin"
-   ],
-   "name": "Panchroma PLA Satin",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFPklMI1": {
-   "filaments": [
-    "BBL/Generic PE",
-    "OrcaFilamentLibrary/Generic PE",
-    "Tiertime/Generic PE"
-   ],
-   "name": "Generic PE",
-   "filament_type": "PE",
-   "filament_vendor": "Generic"
-  },
-  "OFPoyiFs": {
-   "filaments": [
-    "BBL/Polymaker HT-PLA",
-    "OrcaFilamentLibrary/Polymaker HT-PLA",
-    "Snapmaker/Polymaker HT-PLA"
-   ],
-   "name": "Polymaker HT-PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFPqX3x2": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Rosa Amaranto"
-   ],
-   "name": "FilAr PLA Rosa Amaranto",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFQ1KzO8": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA Silk"
-   ],
-   "name": "Snapmaker J1 PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFQ1zgm3": {
-   "filaments": [
-    "Eryone/Eryone ABS-CF"
-   ],
-   "name": "Eryone ABS-CF",
-   "filament_type": "ABS-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFQ3e56w": {
-   "filaments": [
-    "BBL/Bambu PLA Galaxy",
-    "OrcaFilamentLibrary/Bambu PLA Galaxy"
-   ],
-   "name": "Bambu PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFQ40XeN": {
-   "filaments": [
-    "Qidi/QIDI PETG Tough"
-   ],
-   "name": "QIDI PETG Tough",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFQ5TxZ2": {
-   "filaments": [
-    "BBL/addnorth PVDF Adamant S1"
-   ],
-   "name": "addnorth PVDF Adamant S1",
-   "filament_type": "PA",
-   "filament_vendor": "addnorth"
-  },
-  "OFQEGL7z": {
-   "filaments": [
-    "FlyingBear/FlyingBear PA-CF"
-   ],
-   "name": "FlyingBear PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFQGvU2G": {
-   "filaments": [
-    "OrcaArena/Arena TPU 95A"
-   ],
-   "name": "Arena TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFQHiNJs": {
-   "filaments": [
-    "BBL/Bambu Support G",
-    "OrcaFilamentLibrary/Bambu Support G"
-   ],
-   "name": "Bambu Support G",
-   "filament_type": "PA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFQLcbps": {
-   "filaments": [
-    "Anker/Generic PA-CF",
-    "Anycubic/Generic PA-CF",
-    "BBL/Generic PA-CF",
-    "Blocks/Generic PA-CF",
-    "Creality/Generic PA-CF",
-    "Custom/Generic PA-CF",
-    "FLSun/Generic PA-CF",
-    "FlyingBear/Generic PA-CF",
-    "InfiMech/Generic PA-CF",
-    "OrcaArena/Generic PA-CF",
-    "OrcaFilamentLibrary/Generic PA-CF",
-    "Prusa/Generic PA-CF",
-    "Qidi/Generic PA-CF",
-    "Ratrig/Generic PA-CF",
-    "SecKit/Generic PA-CF",
-    "Tiertime/Generic PA-CF",
-    "Vzbot/Generic PA-CF"
-   ],
-   "name": "Generic PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFQMTRc8": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PETG"
-   ],
-   "name": "Snapmaker J1 PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFQMsFfF": {
-   "filaments": [
-    "Qidi/QIDI ABS-GF10"
-   ],
-   "name": "QIDI ABS-GF10",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFQWIKbV": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Titanio"
-   ],
-   "name": "FilAr PLA Titanio",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFQYaiGg": {
-   "filaments": [
-    "Snapmaker/Snapmaker PET"
-   ],
-   "name": "Snapmaker PET",
-   "filament_type": "PET",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFQbjX3s": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PETG"
-   ],
-   "name": "FILL3D PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "FILL3D"
-  },
-  "OFQdaVZS": {
-   "filaments": [
-    "Creality/Generic PET-CF",
-    "Elegoo/Generic PET-CF"
-   ],
-   "name": "Generic PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFQe7sAx": {
-   "filaments": [
-    "Anycubic/Anycubic PA6-CF"
-   ],
-   "name": "Anycubic PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFQyyO0l": {
-   "filaments": [
-    "Flashforge/Polymaker CoPA"
-   ],
-   "name": "Polymaker CoPA",
-   "filament_type": "PA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFR0gODA": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC ABS"
-   ],
-   "name": "SeeMeCNC ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OFR1XLMN": {
-   "filaments": [
-    "Qidi/QIDI TPU 95A-HF"
-   ],
-   "name": "QIDI TPU 95A-HF",
-   "filament_type": "TPU",
-   "filament_vendor": "QIDI"
-  },
-  "OFRFhdqy": {
-   "filaments": [
-    "BBL/addnorth PLA Textura"
-   ],
-   "name": "addnorth PLA Textura",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFRJ325z": {
-   "filaments": [
-    "LH/LHS PETG"
-   ],
-   "name": "LHS PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFRhBryT": {
-   "filaments": [
-    "Cubicon/Cubicon PLAi21"
-   ],
-   "name": "Cubicon PLAi21",
-   "filament_type": "PLA",
-   "filament_vendor": "Cubicon"
-  },
-  "OFRhCTUg": {
-   "filaments": [
-    "Anycubic/Anycubic PET-CF"
-   ],
-   "name": "Anycubic PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFRiFnfQ": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PETG Transition"
-   ],
-   "name": "Eolas Prints PETG Transition",
-   "filament_type": "PETG",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFRiYgMK": {
-   "filaments": [
-    "BBL/Panchroma PLA Celestial",
-    "OrcaFilamentLibrary/Panchroma PLA Celestial",
-    "Snapmaker/Panchroma PLA Celestial"
-   ],
-   "name": "Panchroma PLA Celestial",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFRkjhxK": {
-   "filaments": [
-    "Volumic/Volumic PVA-BVOH (Performance)"
-   ],
-   "name": "Volumic PVA-BVOH (Performance)",
-   "filament_type": "PVA",
-   "filament_vendor": "Volumic"
-  },
-  "OFRooa0F": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PA-CF"
-   ],
-   "name": "Snapmaker Dual PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFRpAZ1P": {
-   "filaments": [
-    "DeltaMaker/DeltaMaker Brand PLA"
-   ],
-   "name": "DeltaMaker Brand PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "DeltaMaker"
-  },
-  "OFRyOsZj": {
-   "filaments": [
-    "re3D/re3D PLA"
-   ],
-   "name": "re3D PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "re3D"
-  },
-  "OFRzR5mi": {
-   "filaments": [
-    "OrcaFilamentLibrary/eSUN ePLA-LW"
-   ],
-   "name": "eSUN ePLA-LW",
-   "filament_type": "PLA-AERO",
-   "filament_vendor": "eSUN"
-  },
-  "OFS2tn6G": {
-   "filaments": [
-    "BBL/Fiberon PA612-CF",
-    "OrcaFilamentLibrary/Fiberon PA612-CF"
-   ],
-   "name": "Fiberon PA612-CF",
-   "filament_type": "PA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFS4jbj3": {
-   "filaments": [
-    "Eryone/Eryone PA"
-   ],
-   "name": "Eryone PA",
-   "filament_type": "PA",
-   "filament_vendor": "Eryone"
-  },
-  "OFS8lTQt": {
-   "filaments": [
-    "BBL/Panchroma PLA Silk",
-    "OrcaFilamentLibrary/Panchroma PLA Silk",
-    "Snapmaker/Panchroma PLA Silk"
-   ],
-   "name": "Panchroma PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFSDfduA": {
-   "filaments": [
-    "Flashforge/Flashforge TPU 65D"
-   ],
-   "name": "Flashforge TPU 65D",
-   "filament_type": "TPU",
-   "filament_vendor": "Flashforge"
-  },
-  "OFSa39yP": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA"
-   ],
-   "name": "Snapmaker J1 PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFSbGfsz": {
-   "filaments": [
-    "OrcaArena/Arena PLA Basic"
-   ],
-   "name": "Arena PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFSfm8iP": {
-   "filaments": [
-    "BBL/BETA PLA Heat Color Change"
-   ],
-   "name": "BETA PLA Heat Color Change",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFSiCZP3": {
-   "filaments": [
-    "BBL/BETA PETG-GF"
-   ],
-   "name": "BETA PETG-GF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "BETA"
-  },
-  "OFSqIcJC": {
-   "filaments": [
-    "Flashforge/Flashforge TPU 95A"
-   ],
-   "name": "Flashforge TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Flashforge"
-  },
-  "OFSw6Mor": {
-   "filaments": [
-    "BBL/addnorth PA Adura FDA"
-   ],
-   "name": "addnorth PA Adura FDA",
-   "filament_type": "PA",
-   "filament_vendor": "addnorth"
-  },
-  "OFSwbBWS": {
-   "filaments": [],
-   "name": "DREMC PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "DREMC"
-  },
-  "OFT2jon4": {
-   "filaments": [
-    "Qidi/QIDI ABS Rapido"
-   ],
-   "name": "QIDI ABS Rapido",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OFTGHyNC": {
-   "filaments": [
-    "OrcaFilamentLibrary/Bambu PLA Impact"
-   ],
-   "name": "Bambu PLA Impact",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFTHDCqA": {
-   "filaments": [
-    "BBL/Bambu PLA Pure"
-   ],
-   "name": "Bambu PLA Pure",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFTOPcx0": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints TPU Transition"
-   ],
-   "name": "Eolas Prints TPU Transition",
-   "filament_type": "TPU",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFTRZ8Y4": {
-   "filaments": [
-    "BBL/Bambu PETG-CF",
-    "OrcaFilamentLibrary/Bambu PETG-CF"
-   ],
-   "name": "Bambu PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFTSXxzE": {
-   "filaments": [
-    "Flashforge/Flashforge PPS-CF"
-   ],
-   "name": "Flashforge PPS-CF",
-   "filament_type": "PPS-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFTXduCM": {
-   "filaments": [
-    "Creality/eSUN ABS+"
-   ],
-   "name": "eSUN ABS+",
-   "filament_type": "ABS",
-   "filament_vendor": "eSUN"
-  },
-  "OFTcE0nA": {
-   "filaments": [
-    "OrcaFilamentLibrary/eSUN PLA-Basic"
-   ],
-   "name": "eSUN PLA-Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFTdauIq": {
-   "filaments": [
-    "Volumic/Volumic PCTG Ultra (Performance)"
-   ],
-   "name": "Volumic PCTG Ultra (Performance)",
-   "filament_type": "PETG",
-   "filament_vendor": "Volumic"
-  },
-  "OFTkj6DR": {
-   "filaments": [
-    "Anycubic/Anycubic PVA"
-   ],
-   "name": "Anycubic PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFTlRzpe": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Gris Pizarra"
-   ],
-   "name": "FilAr PLA Gris Pizarra",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFTnWzBs": {
-   "filaments": [
-    "Creality/Hyper PLA-CF"
-   ],
-   "name": "Hyper PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFTs8peJ": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual TPE"
-   ],
-   "name": "Snapmaker Dual TPE",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFTsHNQi": {
-   "filaments": [
-    "Qidi/QIDI ASA"
-   ],
-   "name": "QIDI ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "QIDI"
-  },
-  "OFU1zPxE": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Galaxy",
-    "OrcaFilamentLibrary/Elegoo PLA Galaxy"
-   ],
-   "name": "Elegoo PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFU3QXL7": {
-   "filaments": [
-    "re3D/re3D PC"
-   ],
-   "name": "re3D PC",
-   "filament_type": "PC",
-   "filament_vendor": "re3D"
-  },
-  "OFU5JPDy": {
-   "filaments": [
-    "BBL/addnorth PETG PRO Matte"
-   ],
-   "name": "addnorth PETG PRO Matte",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OFU7CKZt": {
-   "filaments": [
-    "Volumic/Volumic ASA Ultra (Performance)"
-   ],
-   "name": "Volumic ASA Ultra (Performance)",
-   "filament_type": "ASA",
-   "filament_vendor": "Volumic"
-  },
-  "OFUF7oA4": {
-   "filaments": [
-    "Creality/Hyper PC"
-   ],
-   "name": "Hyper PC",
-   "filament_type": "PC",
-   "filament_vendor": "Creality"
-  },
-  "OFUH1aee": {
-   "filaments": [
-    "Volumic/Volumic FLEX93 Ultra (Performance)"
-   ],
-   "name": "Volumic FLEX93 Ultra (Performance)",
-   "filament_type": "TPU",
-   "filament_vendor": "Volumic"
-  },
-  "OFUIfGoh": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PET"
-   ],
-   "name": "Snapmaker Dual PET",
-   "filament_type": "PET",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFUYCqtB": {
-   "filaments": [
-    "InfiMech/InfiMech PLA"
-   ],
-   "name": "InfiMech PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "InfiMech"
-  },
-  "OFUaHEO9": {
-   "filaments": [
-    "Anycubic/Anycubic PEBA 95A"
-   ],
-   "name": "Anycubic PEBA 95A",
-   "filament_type": "PEBA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFUanySo": {
-   "filaments": [
-    "BBL/Bambu PLA Silk+",
-    "OrcaFilamentLibrary/Bambu PLA Silk+"
-   ],
-   "name": "Bambu PLA Silk+",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFUmS5z5": {
-   "filaments": [
-    "Creality/eSUN ASA+"
-   ],
-   "name": "eSUN ASA+",
-   "filament_type": "ASA",
-   "filament_vendor": "eSUN"
-  },
-  "OFUtiVRn": {
-   "filaments": [
-    "BBL/addnorth PETG ESD"
-   ],
-   "name": "addnorth PETG ESD",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OFUyDDNv": {
-   "filaments": [
-    "Elegoo/Elegoo PC",
-    "OrcaFilamentLibrary/Elegoo PC"
-   ],
-   "name": "Elegoo PC",
-   "filament_type": "PC",
-   "filament_vendor": "Elegoo"
-  },
-  "OFV5Q7j2": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 TPE"
-   ],
-   "name": "Snapmaker J1 TPE",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFV5c8hG": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Sparkle"
-   ],
-   "name": "Flashforge PLA Sparkle",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFV5wEMe": {
-   "filaments": [
-    "Afinia/Afinia ABS"
-   ],
-   "name": "Afinia ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Afinia"
-  },
-  "OFV8Mxqx": {
-   "filaments": [],
-   "name": "Flashforge PLA-SILK",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFVBlUFH": {
-   "filaments": [],
-   "name": "DREMC PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "DREMC"
-  },
-  "OFVCkX5w": {
-   "filaments": [
-    "BBL/Bambu TPU 95A",
-    "OrcaFilamentLibrary/Bambu TPU 95A"
-   ],
-   "name": "Bambu TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFVDWuxl": {
-   "filaments": [
-    "BBL/addnorth PLA HT-PLA PRO Matte"
-   ],
-   "name": "addnorth PLA HT-PLA PRO Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFVHMFJX": {
-   "filaments": [
-    "Qidi/QIDI PETG Tough 0.2 nozzle"
-   ],
-   "name": "QIDI PETG Tough 0.2 nozzle",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFVptRxp": {
-   "filaments": [
-    "BBL/COEX TPE 30D",
-    "OrcaFilamentLibrary/COEX TPE 30D"
-   ],
-   "name": "COEX TPE 30D",
-   "filament_type": "TPU",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFVtIasg": {
-   "filaments": [
-    "Eryone/Eryone ASA"
-   ],
-   "name": "Eryone ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Eryone"
-  },
-  "OFW29a9R": {
-   "filaments": [
-    "BBL/PolyTerra PLA",
-    "OrcaArena/PolyTerra PLA",
-    "OrcaFilamentLibrary/PolyTerra PLA",
-    "Snapmaker/PolyTerra PLA"
-   ],
-   "name": "PolyTerra PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFW5FqkL": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido Silk"
-   ],
-   "name": "QIDI PLA Rapido Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFW8M3CY": {
-   "filaments": [
-    "BBL/BETA PLA Chameleon"
-   ],
-   "name": "BETA PLA Chameleon",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFW8lqnb": {
-   "filaments": [
-    "Snapmaker/Snapmaker PETG Translucent"
-   ],
-   "name": "Snapmaker PETG Translucent",
-   "filament_type": "PETG",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFWDe7YH": {
-   "filaments": [
-    "Qidi/QIDI UltraPA"
-   ],
-   "name": "QIDI UltraPA",
-   "filament_type": "UltraPA",
-   "filament_vendor": "QIDI"
-  },
-  "OFWK0Y9A": {
-   "filaments": [
-    "BBL/addnorth PA Adura"
-   ],
-   "name": "addnorth PA Adura",
-   "filament_type": "PA",
-   "filament_vendor": "addnorth"
-  },
-  "OFWRITFw": {
-   "filaments": [
-    "Prusa/Prusament rPLA"
-   ],
-   "name": "Prusament rPLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFWTAEjH": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPE"
-   ],
-   "name": "Snapmaker TPE",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFWTRJ1K": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Bronce"
-   ],
-   "name": "FilAr PLA Bronce",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFWXCbVF": {
-   "filaments": [
-    "Flashforge/Flashforge PC"
-   ],
-   "name": "Flashforge PC",
-   "filament_type": "PC",
-   "filament_vendor": "Flashforge"
-  },
-  "OFWYtgCa": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Wood",
-    "OrcaFilamentLibrary/Elegoo PLA Wood"
-   ],
-   "name": "Elegoo PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFWa0NiB": {
-   "filaments": [
-    "Volumic/Volumic NYLON Ultra"
-   ],
-   "name": "Volumic NYLON Ultra",
-   "filament_type": "PA",
-   "filament_vendor": "Volumic"
-  },
-  "OFWao3Ic": {
-   "filaments": [
-    "Creality/Ender-PLA"
-   ],
-   "name": "Ender-PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFWbdGsC": {
-   "filaments": [
-    "Anker/Generic PLA-CF",
-    "Anycubic/Generic PLA-CF",
-    "Artillery/Generic PLA-CF",
-    "BBL/Generic PLA-CF",
-    "Blocks/Generic PLA-CF",
-    "Creality/Generic PLA-CF",
-    "Custom/Generic PLA-CF",
-    "FLSun/Generic PLA-CF",
-    "Flashforge/Generic PLA-CF",
-    "OrcaArena/Generic PLA-CF",
-    "OrcaFilamentLibrary/Generic PLA-CF",
-    "Prusa/Generic PLA-CF",
-    "Qidi/Generic PLA-CF",
-    "Ratrig/Generic PLA-CF",
-    "SecKit/Generic PLA-CF",
-    "Tiertime/Generic PLA-CF",
-    "Vzbot/Generic PLA-CF"
-   ],
-   "name": "Generic PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFWgFOjn": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Silk"
-   ],
-   "name": "Snapmaker PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFWwF7K7": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Cafe con Leche"
-   ],
-   "name": "FilAr PLA Cafe con Leche",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFX0ycRQ": {
-   "filaments": [
-    "BBL/Fiberon PA12-CF",
-    "OrcaFilamentLibrary/Fiberon PA12-CF"
-   ],
-   "name": "Fiberon PA12-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFX2zcrM": {
-   "filaments": [
-    "Chuanying/Generic PLA-CF10",
-    "Flashforge/Generic PLA-CF10"
-   ],
-   "name": "Generic PLA-CF10",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFXCBZTA": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints ABS"
-   ],
-   "name": "Eolas Prints ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFXIbw5D": {
-   "filaments": [
-    "BBL/Bambu PLA Matte",
-    "OrcaFilamentLibrary/Bambu PLA Matte"
-   ],
-   "name": "Bambu PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFXJ9iom": {
-   "filaments": [
-    "iQ/Grauts HPP4GF25 P1"
-   ],
-   "name": "Grauts HPP4GF25 P1",
-   "filament_type": "HPP4GF25",
-   "filament_vendor": "iQ Materials"
-  },
-  "OFXSvqOX": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPU 95A HF"
-   ],
-   "name": "Snapmaker TPU 95A HF",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFXTPuqV": {
-   "filaments": [
-    "OrcaFilamentLibrary/Elas PETG Basic"
-   ],
-   "name": "Elas PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "Elas"
-  },
-  "OFXW4CDh": {
-   "filaments": [
-    "Ratrig/Generic PCTG BigNozzle"
-   ],
-   "name": "Generic PCTG BigNozzle",
-   "filament_type": "PCTG",
-   "filament_vendor": "Generic"
-  },
-  "OFXi59OX": {
-   "filaments": [
-    "Afinia/Afinia Value ABS"
-   ],
-   "name": "Afinia Value ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Afinia"
-  },
-  "OFXiArjA": {
-   "filaments": [
-    "Flashforge/Flashforge PETG Pro"
-   ],
-   "name": "Flashforge PETG Pro",
-   "filament_type": "PETG",
-   "filament_vendor": "Flashforge"
-  },
-  "OFXk1emJ": {
-   "filaments": [
-    "Artillery/Artillery PLA Basic"
-   ],
-   "name": "Artillery PLA Basic",
-   "filament_type": "PLA Basic",
-   "filament_vendor": "Artillery"
-  },
-  "OFXkm8q1": {
-   "filaments": [
-    "BBL/Generic PP-CF",
-    "Creality/Generic PP-CF",
-    "OrcaFilamentLibrary/Generic PP-CF",
-    "Tiertime/Generic PP-CF"
-   ],
-   "name": "Generic PP-CF",
-   "filament_type": "PP-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFXmv5p0": {
-   "filaments": [
-    "Creality/Generic Speed PLA"
-   ],
-   "name": "Generic Speed PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFXn3Vd9": {
-   "filaments": [
-    "Qidi/QIDI Support For PAHT"
-   ],
-   "name": "QIDI Support For PAHT",
-   "filament_type": "PAHT-S",
-   "filament_vendor": "QIDI"
-  },
-  "OFXnToSX": {
-   "filaments": [
-    "Creality/Hyper Stardust"
-   ],
-   "name": "Hyper Stardust",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFXuGxvQ": {
-   "filaments": [
-    "Volumic/Volumic PLA Ultra"
-   ],
-   "name": "Volumic PLA Ultra",
-   "filament_type": "PLA",
-   "filament_vendor": "Volumic"
-  },
-  "OFXz7Mwx": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Silk",
-    "OrcaFilamentLibrary/Elegoo PLA Silk"
-   ],
-   "name": "Elegoo PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFXzQ4yL": {
-   "filaments": [
-    "BBL/Bambu ASA-Aero",
-    "OrcaFilamentLibrary/Bambu ASA-Aero"
-   ],
-   "name": "Bambu ASA-Aero",
-   "filament_type": "ASA-AERO",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFY0F5qA": {
-   "filaments": [
-    "Volumic/Volumic PETG Ultra carbone (Performance)"
-   ],
-   "name": "Volumic PETG Ultra carbone (Performance)",
-   "filament_type": "PETG",
-   "filament_vendor": "Volumic"
-  },
-  "OFY3AB7j": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA Matte"
-   ],
-   "name": "Snapmaker J1 PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFY7jxcS": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPU 90A"
-   ],
-   "name": "Snapmaker TPU 90A",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFY9muEs": {
-   "filaments": [
-    "Anker/Generic ABS",
-    "Anycubic/Generic ABS",
-    "Artillery/Generic ABS",
-    "BBL/Generic ABS",
-    "Blocks/Generic ABS",
-    "Chuanying/Generic ABS",
-    "Co Print/Generic ABS",
-    "CoLiDo/Generic ABS",
-    "Comgrow/Generic ABS",
-    "Creality/Generic ABS",
-    "Custom/Generic ABS",
-    "Elegoo/Generic ABS",
-    "FLSun/Generic ABS",
-    "Flashforge/Generic ABS",
-    "FlyingBear/Generic ABS",
-    "InfiMech/Generic ABS",
-    "Lulzbot/Generic ABS",
-    "OrcaArena/Generic ABS",
-    "OrcaFilamentLibrary/Generic ABS",
-    "Peopoly/Generic ABS",
-    "Prusa/Generic ABS",
-    "Qidi/Generic ABS",
-    "RH3D/Generic ABS",
-    "Ratrig/Generic ABS",
-    "SecKit/Generic ABS",
-    "Sovol/Generic ABS",
-    "Tiertime/Generic ABS",
-    "Vzbot/Generic ABS",
-    "Z-Bolt/Generic ABS"
-   ],
-   "name": "Generic ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Generic"
-  },
-  "OFYE7YZw": {
-   "filaments": [
-    "Qidi/Tinmorry PETG-ECO"
-   ],
-   "name": "Tinmorry PETG-ECO",
-   "filament_type": "PETG",
-   "filament_vendor": "Tinmorry"
-  },
-  "OFYEtXuk": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PA-CF"
-   ],
-   "name": "Snapmaker J1 PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFYGbPHX": {
-   "filaments": [
-    "OrcaFilamentLibrary/PolyLite Dual PLA",
-    "Snapmaker/PolyLite Dual PLA"
-   ],
-   "name": "PolyLite Dual PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFYGrfHY": {
-   "filaments": [
-    "BBL/BETA PETG Fluorescence"
-   ],
-   "name": "BETA PETG Fluorescence",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFYPdQJh": {
-   "filaments": [
-    "Anker/Generic PETG",
-    "Anycubic/Generic PETG",
-    "Artillery/Generic PETG",
-    "BBL/Generic PETG",
-    "Blocks/Generic PETG",
-    "CONSTRUCT3D/Generic PETG",
-    "Chuanying/Generic PETG",
-    "Co Print/Generic PETG",
-    "CoLiDo/Generic PETG",
-    "Comgrow/Generic PETG",
-    "Creality/Generic PETG",
-    "Custom/Generic PETG",
-    "DeltaMaker/Generic PETG",
-    "Elegoo/Generic PETG",
-    "FLSun/Generic PETG",
-    "Flashforge/Generic PETG",
-    "FlyingBear/Generic PETG",
-    "Ginger Additive/Generic PETG",
-    "InfiMech/Generic PETG",
-    "LONGER/Generic PETG",
-    "Lulzbot/Generic PETG",
-    "OrcaArena/Generic PETG",
-    "OrcaFilamentLibrary/Generic PETG",
-    "Peopoly/Generic PETG",
-    "Prusa/Generic PETG",
-    "Qidi/Generic PETG",
-    "RH3D/Generic PETG",
-    "Ratrig/Generic PETG",
-    "SecKit/Generic PETG",
-    "Sovol/Generic PETG",
-    "Tiertime/Generic PETG",
-    "Vzbot/Generic PETG",
-    "Z-Bolt/Generic PETG"
-   ],
-   "name": "Generic PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OFYTIMbj": {
-   "filaments": [
-    "Flashforge/Flashforge ABS-CF"
-   ],
-   "name": "Flashforge ABS-CF",
-   "filament_type": "ABS-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFYYeMyQ": {
-   "filaments": [
-    "Flashforge/Flashforge PETG Basic"
-   ],
-   "name": "Flashforge PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "Flashforge"
-  },
-  "OFYd5uS3": {
-   "filaments": [],
-   "name": "DREMC TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "DREMC"
-  },
-  "OFYezc6s": {
-   "filaments": [
-    "FlyingBear/FlyingBear TPU"
-   ],
-   "name": "FlyingBear TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFYuowge": {
-   "filaments": [
-    "FlyingBear/Other ABS",
-    "InfiMech/Other ABS"
-   ],
-   "name": "Other ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Other"
-  },
-  "OFZ0mR5b": {
-   "filaments": [
-    "Anycubic/Anycubic PLA-CF"
-   ],
-   "name": "Anycubic PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFZ2LuAi": {
-   "filaments": [
-    "Wanhao France/YUMI PLA Bowden"
-   ],
-   "name": "YUMI PLA Bowden",
-   "filament_type": "PLA",
-   "filament_vendor": "Yumi"
-  },
-  "OFZ3K2cL": {
-   "filaments": [
-    "Qidi/QIDI PA6-CF"
-   ],
-   "name": "QIDI PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFZ4QbfK": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Rosa Flamenco"
-   ],
-   "name": "FilAr PLA Rosa Flamenco",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFZGrQTU": {
-   "filaments": [
-    "BBL/addnorth PETG Economy"
-   ],
-   "name": "addnorth PETG Economy",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OFZJft47": {
-   "filaments": [
-    "BBL/addnorth PLA Economy"
-   ],
-   "name": "addnorth PLA Economy",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFZLtWYs": {
-   "filaments": [
-    "Qidi/QIDI ABS-GF25"
-   ],
-   "name": "QIDI ABS-GF25",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFZOuWrO": {
-   "filaments": [
-    "Qidi/QIDI PPS-CF"
-   ],
-   "name": "QIDI PPS-CF",
-   "filament_type": "PPS-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFZivHGL": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA"
-   ],
-   "name": "Snapmaker Dual PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFZqZMuv": {
-   "filaments": [
-    "BBL/BETA ASA"
-   ],
-   "name": "BETA ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "BETA"
-  },
-  "OFZr862X": {
-   "filaments": [
-    "Creality/Generic PLA HF",
-    "Prusa/Generic PLA HF"
-   ],
-   "name": "Generic PLA HF",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFZtOQtl": {
-   "filaments": [
-    "Flashforge/Flashforge PA6-CF"
-   ],
-   "name": "Flashforge PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFZtkHRq": {
-   "filaments": [
-    "Anycubic/Anycubic PC"
-   ],
-   "name": "Anycubic PC",
-   "filament_type": "PC",
-   "filament_vendor": "Anycubic"
-  },
-  "OFaDOaNt": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Celeste Cielo"
-   ],
-   "name": "FilAr PLA Celeste Cielo",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFaDsTE0": {
-   "filaments": [
-    "Flashforge/Polymaker S1"
-   ],
-   "name": "Polymaker S1",
-   "filament_type": "PA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFaEesXQ": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Rojo de Carreras"
-   ],
-   "name": "FilAr PLA Rojo de Carreras",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFaEuvNF": {
-   "filaments": [
-    "Anycubic/Anycubic PAHT-CF"
-   ],
-   "name": "Anycubic PAHT-CF",
-   "filament_type": "PAHT-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFaHjk1V": {
-   "filaments": [
-    "Volumic/Volumic PC"
-   ],
-   "name": "Volumic PC",
-   "filament_type": "PC",
-   "filament_vendor": "Volumic"
-  },
-  "OFaP2SsH": {
-   "filaments": [
-    "LH/LHS ASA"
-   ],
-   "name": "LHS ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFaQMgRH": {
-   "filaments": [
-    "BBL/Bambu PLA Tough",
-    "OrcaFilamentLibrary/Bambu PLA Tough"
-   ],
-   "name": "Bambu PLA Tough",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFaRjiIm": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC PETG-CF"
-   ],
-   "name": "SeeMeCNC PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OFaYz8iE": {
-   "filaments": [
-    "OrcaFilamentLibrary/Elas PLA Pro"
-   ],
-   "name": "Elas PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Elas"
-  },
-  "OFaaddbQ": {
-   "filaments": [
-    "Flashforge/Flashforge PVA"
-   ],
-   "name": "Flashforge PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFaeIx7W": {
-   "filaments": [
-    "iQ/Polymaker PETG Polymax black P1"
-   ],
-   "name": "Polymaker PETG Polymax black P1",
-   "filament_type": "PETG Polymax",
-   "filament_vendor": "iQ Materials"
-  },
-  "OFafO6VM": {
-   "filaments": [
-    "Elegoo/Generic PC-CF"
-   ],
-   "name": "Generic PC-CF",
-   "filament_type": "PC-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFausr3F": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Rosa"
-   ],
-   "name": "FilAr PLA-mate Rosa",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFb5EEM3": {
-   "filaments": [
-    "Artillery/Artillery PET"
-   ],
-   "name": "Artillery PET",
-   "filament_type": "PET",
-   "filament_vendor": "Artillery"
-  },
-  "OFbP8zEO": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Silk"
-   ],
-   "name": "Eolas Prints PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFbPuPKY": {
-   "filaments": [
-    "Prusa/Generic FLEX"
-   ],
-   "name": "Generic FLEX",
-   "filament_type": "FLEX",
-   "filament_vendor": "Generic"
-  },
-  "OFbSChKb": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC PLA"
-   ],
-   "name": "SeeMeCNC PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OFbSZBOi": {
-   "filaments": [
-    "InfiMech/InfiMech TPU Basic"
-   ],
-   "name": "InfiMech TPU Basic",
-   "filament_type": "TPU",
-   "filament_vendor": "InfiMech"
-  },
-  "OFbh7HcA": {
-   "filaments": [
-    "Eryone/Eryone PP-CF"
-   ],
-   "name": "Eryone PP-CF",
-   "filament_type": "PP-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFc3xdm9": {
-   "filaments": [
-    "BBL/Overture PLA",
-    "OrcaFilamentLibrary/Overture PLA",
-    "Qidi/Overture PLA"
-   ],
-   "name": "Overture PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFc87pL3": {
-   "filaments": [
-    "OrcaArena/Arena PET-CF"
-   ],
-   "name": "Arena PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFcBJQcC": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual TPU High-Flow"
-   ],
-   "name": "Snapmaker Dual TPU High-Flow",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFcBl0nJ": {
-   "filaments": [
-    "BBL/Fiberon PA612-CF15"
-   ],
-   "name": "Fiberon PA612-CF15",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFcJDtTx": {
-   "filaments": [
-    "Artillery/Artillery TPU"
-   ],
-   "name": "Artillery TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Artillery"
-  },
-  "OFcKtw8W": {
-   "filaments": [
-    "Volumic/PA6 CF20 (Performance)"
-   ],
-   "name": "PA6 CF20 (Performance)",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Volumic"
-  },
-  "OFcVLpNA": {
-   "filaments": [
-    "Flashforge/FusRock PAHT-GF"
-   ],
-   "name": "FusRock PAHT-GF",
-   "filament_type": "PAHT-GF",
-   "filament_vendor": "FusRock"
-  },
-  "OFcfQk4h": {
-   "filaments": [
-    "BBL/Overture Air PLA",
-    "OrcaFilamentLibrary/Overture Air PLA"
-   ],
-   "name": "Overture Air PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFcnWTJB": {
-   "filaments": [
-    "BBL/BETA PLA Glitter"
-   ],
-   "name": "BETA PLA Glitter",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFcogyWl": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Metal"
-   ],
-   "name": "WonderMaker PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFcpa50Z": {
-   "filaments": [
-    "BBL/addnorth PLA-CF Carbon Fiber"
-   ],
-   "name": "addnorth PLA-CF Carbon Fiber",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "addnorth"
-  },
-  "OFctg8r1": {
-   "filaments": [
-    "CoLiDo/CoLiDo PLA+"
-   ],
-   "name": "CoLiDo PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "CoLiDo"
-  },
-  "OFcvKkrs": {
-   "filaments": [
-    "BBL/Overture TPU",
-    "OrcaFilamentLibrary/Overture TPU"
-   ],
-   "name": "Overture TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Overture"
-  },
-  "OFcytyoA": {
-   "filaments": [
-    "BBL/Fiberon PETG-ESD",
-    "OrcaFilamentLibrary/Fiberon PETG-ESD",
-    "Snapmaker/Fiberon PETG-ESD"
-   ],
-   "name": "Fiberon PETG-ESD",
-   "filament_type": "PETG",
-   "filament_vendor": "Polymaker"
-  },
-  "OFd0Fv0k": {
-   "filaments": [
-    "BBL/Generic PE-CF",
-    "OrcaFilamentLibrary/Generic PE-CF",
-    "Tiertime/Generic PE-CF"
-   ],
-   "name": "Generic PE-CF",
-   "filament_type": "PE-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFd2vX0G": {
-   "filaments": [
-    "BBL/COEX PLA PRIME",
-    "OrcaFilamentLibrary/COEX PLA PRIME"
-   ],
-   "name": "COEX PLA PRIME",
-   "filament_type": "PLA",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFd4zw5l": {
-   "filaments": [
-    "BBL/AliZ PA-CF",
-    "OrcaFilamentLibrary/AliZ PA-CF"
-   ],
-   "name": "AliZ PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Aliz"
-  },
-  "OFdD5Wbu": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA-CF"
-   ],
-   "name": "Snapmaker J1 PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFdI4zMo": {
-   "filaments": [],
-   "name": "DREMC ASA CF",
-   "filament_type": "ASA",
-   "filament_vendor": "DREMC"
-  },
-  "OFdXVjGZ": {
-   "filaments": [
-    "Tiertime/Tiertime PC"
-   ],
-   "name": "Tiertime PC",
-   "filament_type": "PC",
-   "filament_vendor": "Tiertime"
-  },
-  "OFdb8YNz": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Verde Manzana"
-   ],
-   "name": "FilAr PLA Verde Manzana",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFdd8ZqJ": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Wood"
-   ],
-   "name": "Snapmaker PLA Wood",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFdqkWtz": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Luminous"
-   ],
-   "name": "Flashforge PLA Luminous",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFdrYBmI": {
-   "filaments": [
-    "Tiertime/Tiertime ASA"
-   ],
-   "name": "Tiertime ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Tiertime"
-  },
-  "OFdtPd9h": {
-   "filaments": [
-    "Qidi/QIDI PETG-GF"
-   ],
-   "name": "QIDI PETG-GF",
-   "filament_type": "PETG-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFdzlrhi": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Chocolate"
-   ],
-   "name": "FilAr PLA-mate Chocolate",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFe61n6v": {
-   "filaments": [
-    "Ratrig/RatRig PunkFil PETG CF"
-   ],
-   "name": "RatRig PunkFil PETG CF",
-   "filament_type": "PETG-CF10",
-   "filament_vendor": "RatRig"
-  },
-  "OFe8tuNb": {
-   "filaments": [
-    "Tiertime/Tiertime PA6-CF"
-   ],
-   "name": "Tiertime PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Tiertime"
-  },
-  "OFe8yBMG": {
-   "filaments": [
-    "Qidi/QIDI PETG Tough 0.6 nozzle"
-   ],
-   "name": "QIDI PETG Tough 0.6 nozzle",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFe98A1y": {
-   "filaments": [
-    "Elegoo/Elegoo PET-CF",
-    "OrcaFilamentLibrary/Elegoo PET-CF"
-   ],
-   "name": "Elegoo PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Elegoo"
-  },
-  "OFeAxvEt": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual ABS Benchy"
-   ],
-   "name": "Snapmaker Dual ABS Benchy",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFeCJqxx": {
-   "filaments": [
-    "Qidi/QIDI ABS Rapido Metal"
-   ],
-   "name": "QIDI ABS Rapido Metal",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OFeF4UNh": {
-   "filaments": [
-    "BBL/BETA PLA Silk"
-   ],
-   "name": "BETA PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFeIyhUx": {
-   "filaments": [
-    "Anycubic/Anycubic PC-CF"
-   ],
-   "name": "Anycubic PC-CF",
-   "filament_type": "PC-CF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFeTATC7": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 Breakaway"
-   ],
-   "name": "Snapmaker J1 Breakaway",
-   "filament_type": "Breakaway Support",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFeVzkSU": {
-   "filaments": [
-    "Snapmaker/Fiberon PPS-GF20"
-   ],
-   "name": "Fiberon PPS-GF20",
-   "filament_type": "ABS",
-   "filament_vendor": "Polymaker"
-  },
-  "OFeelsSM": {
-   "filaments": [
-    "Qidi/HATCHBOX PLA"
-   ],
-   "name": "HATCHBOX PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "HATCHBOX"
-  },
-  "OFelDBgv": {
-   "filaments": [
-    "Snapmaker/Polymaker PLA"
-   ],
-   "name": "Polymaker PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFepU7Tl": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Matte"
-   ],
-   "name": "WonderMaker PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFesA6rF": {
-   "filaments": [
-    "Anker/Generic PLA Silk",
-    "BBL/Generic PLA Silk",
-    "Creality/Generic PLA Silk",
-    "FLSun/Generic PLA Silk",
-    "Flashforge/Generic PLA Silk",
-    "OrcaArena/Generic PLA Silk",
-    "OrcaFilamentLibrary/Generic PLA Silk",
-    "Prusa/Generic PLA Silk",
-    "Qidi/Generic PLA Silk",
-    "Sovol/Generic PLA Silk",
-    "Tiertime/Generic PLA Silk"
-   ],
-   "name": "Generic PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFexaZU2": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Manteca"
-   ],
-   "name": "FilAr PLA Manteca",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFf0MkD5": {
-   "filaments": [
-    "Qidi/QIDI PETG Translucent"
-   ],
-   "name": "QIDI PETG Translucent",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFf5awy4": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Matte"
-   ],
-   "name": "Eolas Prints PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFf6ZEvu": {
-   "filaments": [
-    "InfiMech/InfiMech PC"
-   ],
-   "name": "InfiMech PC",
-   "filament_type": "PC",
-   "filament_vendor": "InfiMech"
-  },
-  "OFf6mfQO": {
-   "filaments": [
-    "BBL/Bambu Support for ABS",
-    "OrcaFilamentLibrary/Bambu Support for ABS"
-   ],
-   "name": "Bambu Support for ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFf6ynfH": {
-   "filaments": [
-    "FlyingBear/FlyingBear PETG Basic"
-   ],
-   "name": "FlyingBear PETG Basic",
-   "filament_type": "PETG Basic",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFfBpSRI": {
-   "filaments": [
-    "BBL/Bambu ASA",
-    "OrcaFilamentLibrary/Bambu ASA"
-   ],
-   "name": "Bambu ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFfD87Gy": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Glow"
-   ],
-   "name": "Snapmaker PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFfHGM1D": {
-   "filaments": [
-    "re3D/re3D rPP"
-   ],
-   "name": "re3D rPP",
-   "filament_type": "PP",
-   "filament_vendor": "re3D"
-  },
-  "OFfJSCzm": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast PETG"
-   ],
-   "name": "FDplast PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "FDplast"
-  },
-  "OFfSqS4R": {
-   "filaments": [
-    "Creality/ENDER FAST PLA"
-   ],
-   "name": "ENDER FAST PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFfYHK5z": {
-   "filaments": [
-    "Qidi/Polymaker PLA-HT"
-   ],
-   "name": "Polymaker PLA-HT",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFfZcoKr": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Piel"
-   ],
-   "name": "FilAr PLA-mate Piel",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFfb10SK": {
-   "filaments": [
-    "Artillery/Artillery PC"
-   ],
-   "name": "Artillery PC",
-   "filament_type": "PC",
-   "filament_vendor": "Artillery"
-  },
-  "OFfmHUkQ": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual Breakaway"
-   ],
-   "name": "Snapmaker Dual Breakaway",
-   "filament_type": "Breakaway Support",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFfmZrI3": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast TPU"
-   ],
-   "name": "FDplast TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "FDplast"
-  },
-  "OFfnXFie": {
-   "filaments": [
-    "BBL/COEX TPE 40D",
-    "OrcaFilamentLibrary/COEX TPE 40D"
-   ],
-   "name": "COEX TPE 40D",
-   "filament_type": "TPU",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFfq5YXA": {
-   "filaments": [
-    "OrcaFilamentLibrary/Valment PLA-CF"
-   ],
-   "name": "Valment PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Valment"
-  },
-  "OFfr4XNO": {
-   "filaments": [
-    "BBL/COEX TPE 60D",
-    "OrcaFilamentLibrary/COEX TPE 60D"
-   ],
-   "name": "COEX TPE 60D",
-   "filament_type": "TPU",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFfr6JDF": {
-   "filaments": [
-    "Qidi/QIDI PETG Tough 0.8 nozzle"
-   ],
-   "name": "QIDI PETG Tough 0.8 nozzle",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFfuhviw": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Marble",
-    "OrcaFilamentLibrary/Elegoo PLA Marble"
-   ],
-   "name": "Elegoo PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFfuih8e": {
-   "filaments": [
-    "Creality/Creality Silk PLA"
-   ],
-   "name": "Creality Silk PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFg3cWVt": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA Metal"
-   ],
-   "name": "Snapmaker Dual PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFg57Nmc": {
-   "filaments": [
-    "BBL/Bambu PC FR",
-    "OrcaFilamentLibrary/Bambu PC FR"
-   ],
-   "name": "Bambu PC FR",
-   "filament_type": "PC",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFg8hMzT": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PPCF"
-   ],
-   "name": "FILL3D PPCF",
-   "filament_type": "PP",
-   "filament_vendor": "FILL3D"
-  },
-  "OFg8ndtj": {
-   "filaments": [
-    "Anker/Generic PA",
-    "Anycubic/Generic PA",
-    "BBL/Generic PA",
-    "Blocks/Generic PA",
-    "Creality/Generic PA",
-    "Custom/Generic PA",
-    "Elegoo/Generic PA",
-    "FLSun/Generic PA",
-    "OrcaArena/Generic PA",
-    "OrcaFilamentLibrary/Generic PA",
-    "Prusa/Generic PA",
-    "Qidi/Generic PA",
-    "Ratrig/Generic PA",
-    "SecKit/Generic PA",
-    "Tiertime/Generic PA",
-    "Vzbot/Generic PA",
-    "Z-Bolt/Generic PA"
-   ],
-   "name": "Generic PA",
-   "filament_type": "PA",
-   "filament_vendor": "Generic"
-  },
-  "OFgHh8ly": {
-   "filaments": [
-    "Afinia/Afinia Value PLA"
-   ],
-   "name": "Afinia Value PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Afinia"
-  },
-  "OFgMWJ8T": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Negro Azabache"
-   ],
-   "name": "FilAr PLA Negro Azabache",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFgSbX7E": {
-   "filaments": [
-    "Volumic/Volumic PC (Performance)"
-   ],
-   "name": "Volumic PC (Performance)",
-   "filament_type": "PC",
-   "filament_vendor": "Volumic"
-  },
-  "OFgXgt98": {
-   "filaments": [
-    "Artillery/Artillery ABS"
-   ],
-   "name": "Artillery ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Artillery"
-  },
-  "OFgbpcy9": {
-   "filaments": [
-    "Anker/Generic TPU",
-    "Anycubic/Generic TPU",
-    "Artillery/Generic TPU",
-    "BBL/Generic TPU",
-    "Blocks/Generic TPU",
-    "Chuanying/Generic TPU",
-    "Co Print/Generic TPU",
-    "CoLiDo/Generic TPU",
-    "Creality/Generic TPU",
-    "Custom/Generic TPU",
-    "DeltaMaker/Generic TPU",
-    "FLSun/Generic TPU",
-    "Flashforge/Generic TPU",
-    "FlyingBear/Generic TPU",
-    "InfiMech/Generic TPU",
-    "OrcaArena/Generic TPU",
-    "OrcaFilamentLibrary/Generic TPU",
-    "Prusa/Generic TPU",
-    "Qidi/Generic TPU",
-    "RH3D/Generic TPU",
-    "Ratrig/Generic TPU",
-    "SecKit/Generic TPU",
-    "Sovol/Generic TPU",
-    "Tiertime/Generic TPU",
-    "Vzbot/Generic TPU"
-   ],
-   "name": "Generic TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OFgdaBOt": {
-   "filaments": [
-    "Snapmaker/Polymaker Tough PLA Family"
-   ],
-   "name": "Polymaker Tough PLA Family",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFgeM7nD": {
-   "filaments": [
-    "Flashforge/Flashforge PA12-CF"
-   ],
-   "name": "Flashforge PA12-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFgjgN35": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Silk"
-   ],
-   "name": "Flashforge PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFglhKLM": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido 0.8 nozzle"
-   ],
-   "name": "QIDI PLA Rapido 0.8 nozzle",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFgpLTMR": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Gris Plata"
-   ],
-   "name": "FilAr PETG Gris Plata",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFgpQwkk": {
-   "filaments": [
-    "Creality/CR-PLA Fluo"
-   ],
-   "name": "CR-PLA Fluo",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFgptDSf": {
-   "filaments": [
-    "OrcaArena/Arena PLA Matte"
-   ],
-   "name": "Arena PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFgyPlwU": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPU High-Flow"
-   ],
-   "name": "Snapmaker TPU High-Flow",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFh7mvPO": {
-   "filaments": [
-    "Prusa/Prusament PVB"
-   ],
-   "name": "Prusament PVB",
-   "filament_type": "PVB",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFh9u9c0": {
-   "filaments": [
-    "Creality/Generic PA6-GF"
-   ],
-   "name": "Generic PA6-GF",
-   "filament_type": "PA-GF",
-   "filament_vendor": "Generic"
-  },
-  "OFhASRWj": {
-   "filaments": [
-    "BBL/Panchroma PLA Temp Shift",
-    "OrcaFilamentLibrary/Panchroma PLA Temp Shift",
-    "Snapmaker/Panchroma PLA Temp Shift"
-   ],
-   "name": "Panchroma PLA Temp Shift",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFhMO9Kh": {
-   "filaments": [
-    "OrcaFilamentLibrary/GreenGate3D PETG"
-   ],
-   "name": "GreenGate3D PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "GreenGate3D"
-  },
-  "OFhN09f0": {
-   "filaments": [
-    "BBL/addnorth PC BLend HT LCF"
-   ],
-   "name": "addnorth PC BLend HT LCF",
-   "filament_type": "PC",
-   "filament_vendor": "addnorth"
-  },
-  "OFhO5aEJ": {
-   "filaments": [
-    "Ratrig/RatRig PunkFil ABS"
-   ],
-   "name": "RatRig PunkFil ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "RatRig"
-  },
-  "OFhQf8ou": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA-CF"
-   ],
-   "name": "Snapmaker PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFhQfUQY": {
-   "filaments": [
-    "BBL/Generic SBS",
-    "OrcaFilamentLibrary/Generic SBS",
-    "Tiertime/Generic SBS"
-   ],
-   "name": "Generic SBS",
-   "filament_type": "SBS",
-   "filament_vendor": "Generic"
-  },
-  "OFhTPf6L": {
-   "filaments": [
-    "Creality/Generic PA6-CF",
-    "Elegoo/Generic PA6-CF"
-   ],
-   "name": "Generic PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFhUjPA5": {
-   "filaments": [
-    "Eryone/Eryone TPU"
-   ],
-   "name": "Eryone TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Eryone"
-  },
-  "OFhWc5Bv": {
-   "filaments": [
-    "OrcaFilamentLibrary/NIT ABS"
-   ],
-   "name": "NIT ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "NIT"
-  },
-  "OFhWhL1i": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PETG"
-   ],
-   "name": "Eolas Prints PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFhWrAuP": {
-   "filaments": [
-    "Qidi/QIDI PLA-CF"
-   ],
-   "name": "QIDI PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFhbolij": {
-   "filaments": [
-    "Creality/eSUN PLA-Lite"
-   ],
-   "name": "eSUN PLA-Lite",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFhcYzR8": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Sparkle",
-    "OrcaFilamentLibrary/Elegoo PLA Sparkle"
-   ],
-   "name": "Elegoo PLA Sparkle",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFhfd722": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints TPU Flex 93A"
-   ],
-   "name": "Eolas Prints TPU Flex 93A",
-   "filament_type": "TPU",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFhiJE7Y": {
-   "filaments": [
-    "Qidi/QIDI PEBA 95A"
-   ],
-   "name": "QIDI PEBA 95A",
-   "filament_type": "PEBA",
-   "filament_vendor": "QIDI"
-  },
-  "OFhkN0a7": {
-   "filaments": [
-    "Creality/Hyper PA612-CF"
-   ],
-   "name": "Hyper PA612-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFhlCNqq": {
-   "filaments": [
-    "BBL/COEX PLA",
-    "OrcaFilamentLibrary/COEX PLA"
-   ],
-   "name": "COEX PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFhmxnYw": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Basic"
-   ],
-   "name": "Snapmaker PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFhuaUQB": {
-   "filaments": [
-    "BBL/Bambu ABS",
-    "OrcaFilamentLibrary/Bambu ABS",
-    "Qidi/Bambu ABS"
-   ],
-   "name": "Bambu ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFhwiZ50": {
-   "filaments": [
-    "Qidi/QIDI PLA Rapido 0.2 nozzle"
-   ],
-   "name": "QIDI PLA Rapido 0.2 nozzle",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFhx4uOG": {
-   "filaments": [
-    "Qidi/QIDI PET-GF"
-   ],
-   "name": "QIDI PET-GF",
-   "filament_type": "PET-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFi5RSve": {
-   "filaments": [
-    "Creality/eSUN PLA-LW"
-   ],
-   "name": "eSUN PLA-LW",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFi6PfUM": {
-   "filaments": [
-    "Chuanying/Generic PLA-Silk",
-    "Creality/Generic PLA-Silk",
-    "Flashforge/Generic PLA-Silk"
-   ],
-   "name": "Generic PLA-Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFi90KlM": {
-   "filaments": [
-    "Volumic/Volumic NYLON Ultra (Performance)"
-   ],
-   "name": "Volumic NYLON Ultra (Performance)",
-   "filament_type": "PA",
-   "filament_vendor": "Volumic"
-  },
-  "OFiDpM1B": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Bordo"
-   ],
-   "name": "FilAr PLA-mate Bordo",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFiEz2XI": {
-   "filaments": [
-    "Cubicon/Cubicon PA-CF"
-   ],
-   "name": "Cubicon PA-CF",
-   "filament_type": "PA",
-   "filament_vendor": "Cubicon"
-  },
-  "OFiWaoqD": {
-   "filaments": [
-    "OrcaFilamentLibrary/DREMC PPA-CF"
-   ],
-   "name": "DREMC PPA-CF",
-   "filament_type": "PPA-CF",
-   "filament_vendor": "DREMC"
-  },
-  "OFibWuBd": {
-   "filaments": [
-    "Flashforge/Flashforge ABS Basic"
-   ],
-   "name": "Flashforge ABS Basic",
-   "filament_type": "ABS",
-   "filament_vendor": "Flashforge"
-  },
-  "OFilAA3b": {
-   "filaments": [
-    "Eryone/Eryone PLA-CF"
-   ],
-   "name": "Eryone PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFilD4bP": {
-   "filaments": [
-    "FlyingBear/FlyingBear PLA"
-   ],
-   "name": "FlyingBear PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFilnglt": {
-   "filaments": [
-    "Artillery/Artillery PETG"
-   ],
-   "name": "Artillery PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Artillery"
-  },
-  "OFin64Qg": {
-   "filaments": [
-    "Creality/Generic Support for PLA"
-   ],
-   "name": "Generic Support for PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFitS8al": {
-   "filaments": [
-    "BBL/PolyLite PLA Neon",
-    "Snapmaker/PolyLite PLA Neon"
-   ],
-   "name": "PolyLite PLA Neon",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFiwEbze": {
-   "filaments": [
-    "Volumic/PETG ESD (Performance)"
-   ],
-   "name": "PETG ESD (Performance)",
-   "filament_type": "PETG-ESD",
-   "filament_vendor": "Volumic"
-  },
-  "OFj3bTjw": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Amarillo"
-   ],
-   "name": "FilAr PLA-mate Amarillo",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFj64R5U": {
-   "filaments": [
-    "Peopoly/Peopoly Lancer ABS-GF"
-   ],
-   "name": "Peopoly Lancer ABS-GF",
-   "filament_type": "ABS",
-   "filament_vendor": "Peopoly"
-  },
-  "OFjD3YTW": {
-   "filaments": [
-    "Qidi/Qidi PC-ABS-FR"
-   ],
-   "name": "Qidi PC-ABS-FR",
-   "filament_type": "PC-ABS-FR",
-   "filament_vendor": "QIDI"
-  },
-  "OFjHrAX0": {
-   "filaments": [
-    "WonderMaker/WonderMaker ABS"
-   ],
-   "name": "WonderMaker ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFjLAYgO": {
-   "filaments": [
-    "Anycubic/Anycubic PEBA"
-   ],
-   "name": "Anycubic PEBA",
-   "filament_type": "PEBA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFjPXrXO": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Glow",
-    "OrcaFilamentLibrary/Elegoo PLA Glow"
-   ],
-   "name": "Elegoo PLA Glow",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFjT9PkZ": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Tabaco"
-   ],
-   "name": "FilAr PLA Tabaco",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFjUGUIK": {
-   "filaments": [
-    "iQ/Fiberthree PACF Pro P1"
-   ],
-   "name": "Fiberthree PACF Pro P1",
-   "filament_type": "PACF Pro",
-   "filament_vendor": "iQ Materials"
-  },
-  "OFjUXn67": {
-   "filaments": [
-    "BBL/BETA ABS"
-   ],
-   "name": "BETA ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "BETA"
-  },
-  "OFjVOWfJ": {
-   "filaments": [
-    "Anycubic/Anycubic PLA High Speed"
-   ],
-   "name": "Anycubic PLA High Speed",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFjXrKFO": {
-   "filaments": [
-    "OrcaArena/Arena PLA Impact"
-   ],
-   "name": "Arena PLA Impact",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFjb0wos": {
-   "filaments": [
-    "BBL/Panchroma PLA Metallic",
-    "OrcaFilamentLibrary/Panchroma PLA Metallic",
-    "Snapmaker/Panchroma PLA Metallic"
-   ],
-   "name": "Panchroma PLA Metallic",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFjiXpyf": {
-   "filaments": [
-    "Qidi/Generic TPU 95A",
-    "TwoTrees/Generic TPU 95A"
-   ],
-   "name": "Generic TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OFjkdnyN": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual TPU"
-   ],
-   "name": "Snapmaker Dual TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFjoAe0R": {
-   "filaments": [
-    "Qidi/Qidi PLA-CF"
-   ],
-   "name": "Qidi PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFjogeYN": {
-   "filaments": [
-    "BBL/BETA PETG Glitter"
-   ],
-   "name": "BETA PETG Glitter",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFjorDcx": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast ABS"
-   ],
-   "name": "FDplast ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "FDplast"
-  },
-  "OFjt8dDO": {
-   "filaments": [
-    "Flashforge/FusRock NexPA-CF25"
-   ],
-   "name": "FusRock NexPA-CF25",
-   "filament_type": "PA-CF",
-   "filament_vendor": "FusRock"
-  },
-  "OFjt9en1": {
-   "filaments": [
-    "OrcaFilamentLibrary/Generic CoPE"
-   ],
-   "name": "Generic CoPE",
-   "filament_type": "CoPE",
-   "filament_vendor": "Generic"
-  },
-  "OFjz0a3m": {
-   "filaments": [
-    "Prusa/Prusament PC-CF"
-   ],
-   "name": "Prusament PC-CF",
-   "filament_type": "PC-CF",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFk8t9mz": {
-   "filaments": [
-    "BBL/Fiberon PETG-rCF",
-    "OrcaFilamentLibrary/Fiberon PETG-rCF"
-   ],
-   "name": "Fiberon PETG-rCF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFkAltI8": {
-   "filaments": [
-    "FlyingBear/Other PA-CF",
-    "InfiMech/Other PA-CF"
-   ],
-   "name": "Other PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Other"
-  },
-  "OFkGp50Y": {
-   "filaments": [
-    "Volumic/Volumic UNIVERSAL Ultra (Performance)"
-   ],
-   "name": "Volumic UNIVERSAL Ultra (Performance)",
-   "filament_type": "UNIV",
-   "filament_vendor": "Volumic"
-  },
-  "OFkGvN4d": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Verde Pixel"
-   ],
-   "name": "FilAr PLA Verde Pixel",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFkHbjUv": {
-   "filaments": [
-    "BBL/BETA PLA Metallic"
-   ],
-   "name": "BETA PLA Metallic",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFkOviHk": {
-   "filaments": [
-    "BBL/Fiberon PA6-CF",
-    "OrcaFilamentLibrary/Fiberon PA6-CF"
-   ],
-   "name": "Fiberon PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFkR8E2c": {
-   "filaments": [
-    "Prusa/Prusament PETG"
-   ],
-   "name": "Prusament PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFkf1HHw": {
-   "filaments": [
-    "Flashforge/Generic PLA-SILK"
-   ],
-   "name": "Generic PLA-SILK",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFkhhUS0": {
-   "filaments": [
-    "Elegoo/Elegoo Rapid PLA+",
-    "OrcaFilamentLibrary/Elegoo Rapid PLA+"
-   ],
-   "name": "Elegoo Rapid PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFklJcWK": {
-   "filaments": [
-    "FlyingBear/Other PLA Hyper",
-    "InfiMech/Other PLA Hyper"
-   ],
-   "name": "Other PLA Hyper",
-   "filament_type": "PLA",
-   "filament_vendor": "Other"
-  },
-  "OFknl9Iz": {
-   "filaments": [
-    "BBL/Bambu ABS-GF",
-    "OrcaFilamentLibrary/Bambu ABS-GF"
-   ],
-   "name": "Bambu ABS-GF",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFkoLUtR": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Verde Oliva"
-   ],
-   "name": "FilAr PLA Verde Oliva",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFkq7rPy": {
-   "filaments": [
-    "Eryone/Eryone PA-GF"
-   ],
-   "name": "Eryone PA-GF",
-   "filament_type": "PA-GF",
-   "filament_vendor": "Eryone"
-  },
-  "OFks6esg": {
-   "filaments": [
-    "Creality/EN-PLA+"
-   ],
-   "name": "EN-PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFkx5MEe": {
-   "filaments": [
-    "Artillery/Artillery PVA"
-   ],
-   "name": "Artillery PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Artillery"
-  },
-  "OFkzr35f": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Antibacterial"
-   ],
-   "name": "Eolas Prints PLA Antibacterial",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFlBoEfL": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 TPU High-Flow"
-   ],
-   "name": "Snapmaker J1 TPU High-Flow",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFlIsW6f": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA Matte"
-   ],
-   "name": "Snapmaker Dual PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFlN6DL1": {
-   "filaments": [
-    "Qidi/QIDI PA-Ultra"
-   ],
-   "name": "QIDI PA-Ultra",
-   "filament_type": "UltraPA",
-   "filament_vendor": "QIDI"
-  },
-  "OFlP3KWq": {
-   "filaments": [
-    "Elegoo/Elegoo PETG HF",
-    "OrcaFilamentLibrary/Elegoo PETG HF"
-   ],
-   "name": "Elegoo PETG HF",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFlSNkhc": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints ASA"
-   ],
-   "name": "Eolas Prints ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFlfuj2k": {
-   "filaments": [
-    "BBL/Bambu TPU 85A"
-   ],
-   "name": "Bambu TPU 85A",
-   "filament_type": "TPU",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFlgMgNM": {
-   "filaments": [
-    "Flashforge/Flashforge PPS"
-   ],
-   "name": "Flashforge PPS",
-   "filament_type": "PPS",
-   "filament_vendor": "Flashforge"
-  },
-  "OFllmFhT": {
-   "filaments": [
-    "Elegoo/Generic PETG PRO"
-   ],
-   "name": "Generic PETG PRO",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OFlmxlDG": {
-   "filaments": [
-    "BBL/BETA HIPS"
-   ],
-   "name": "BETA HIPS",
-   "filament_type": "HIPS",
-   "filament_vendor": "BETA"
-  },
-  "OFln72PT": {
-   "filaments": [
-    "Elegoo/Elegoo PLA-CF",
-    "OrcaFilamentLibrary/Elegoo PLA-CF"
-   ],
-   "name": "Elegoo PLA-CF",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFlsTpJG": {
-   "filaments": [
-    "Elegoo/Elegoo PC-FR",
-    "OrcaFilamentLibrary/Elegoo PC-FR"
-   ],
-   "name": "Elegoo PC-FR",
-   "filament_type": "PC",
-   "filament_vendor": "Elegoo"
-  },
-  "OFlufQpZ": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA"
-   ],
-   "name": "Snapmaker PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFlwmqrC": {
-   "filaments": [
-    "BBL/Polymaker HT-PLA-GF",
-    "OrcaFilamentLibrary/Polymaker HT-PLA-GF",
-    "Snapmaker/Polymaker HT-PLA-GF"
-   ],
-   "name": "Polymaker HT-PLA-GF",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFm06H6V": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Basic",
-    "OrcaFilamentLibrary/Elegoo PLA Basic"
-   ],
-   "name": "Elegoo PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFm4SivL": {
-   "filaments": [
-    "Flashforge/Flashforge PLA Pro"
-   ],
-   "name": "Flashforge PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Flashforge"
-  },
-  "OFm4ysMO": {
-   "filaments": [
-    "FlyingBear/FlyingBear ABS"
-   ],
-   "name": "FlyingBear ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "FlyingBear"
-  },
-  "OFm70lLt": {
-   "filaments": [
-    "CoLiDo/CoLiDo PLA"
-   ],
-   "name": "CoLiDo PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "CoLiDo"
-  },
-  "OFmCOW2Y": {
-   "filaments": [
-    "re3D/re3D rPETG"
-   ],
-   "name": "re3D rPETG",
-   "filament_type": "PETG",
-   "filament_vendor": "re3D"
-  },
-  "OFmFwUWM": {
-   "filaments": [
-    "Prusa/Prusament ASA"
-   ],
-   "name": "Prusament ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFmJAd3A": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast HIPS"
-   ],
-   "name": "FDplast HIPS",
-   "filament_type": "HIPS",
-   "filament_vendor": "FDplast"
-  },
-  "OFmKU2Ha": {
-   "filaments": [
-    "Eryone/Eryone PLA"
-   ],
-   "name": "Eryone PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Eryone"
-  },
-  "OFmN2lvw": {
-   "filaments": [
-    "BBL/Generic TPU for AMS"
-   ],
-   "name": "Generic TPU for AMS",
-   "filament_type": "TPU-AMS",
-   "filament_vendor": "Generic"
-  },
-  "OFmY0l6t": {
-   "filaments": [
-    "Creality/Generic PLA Matte",
-    "Elegoo/Generic PLA Matte",
-    "OrcaFilamentLibrary/Generic PLA Matte"
-   ],
-   "name": "Generic PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFma5TXH": {
-   "filaments": [
-    "Qidi/QIDI ABS Odorless"
-   ],
-   "name": "QIDI ABS Odorless",
-   "filament_type": "ABS",
-   "filament_vendor": "QIDI"
-  },
-  "OFmaeU4a": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Naranja"
-   ],
-   "name": "FilAr PLA-mate Naranja",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFmfizbq": {
-   "filaments": [
-    "OrcaArena/Arena PLA Silk"
-   ],
-   "name": "Arena PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFmjN2bc": {
-   "filaments": [
-    "Anycubic/Anycubic PLA"
-   ],
-   "name": "Anycubic PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFmn9NZL": {
-   "filaments": [
-    "BBL/FusRock ABS-GF",
-    "OrcaFilamentLibrary/FusRock ABS-GF"
-   ],
-   "name": "FusRock ABS-GF",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "FusRock"
-  },
-  "OFmpMwxS": {
-   "filaments": [
-    "BBL/Generic PLA High Speed",
-    "Creality/Generic PLA High Speed",
-    "FLSun/Generic PLA High Speed",
-    "Flashforge/Generic PLA High Speed",
-    "OrcaFilamentLibrary/Generic PLA High Speed",
-    "Qidi/Generic PLA High Speed",
-    "Tiertime/Generic PLA High Speed"
-   ],
-   "name": "Generic PLA High Speed",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFmt513L": {
-   "filaments": [
-    "BBL/BETA PETG Transparent"
-   ],
-   "name": "BETA PETG Transparent",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFmveLWz": {
-   "filaments": [
-    "Elegoo/Elegoo PETG-GF",
-    "OrcaFilamentLibrary/Elegoo PETG-GF"
-   ],
-   "name": "Elegoo PETG-GF",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFn1QaY3": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Translucent2",
-    "OrcaFilamentLibrary/Elegoo PLA Translucent2"
-   ],
-   "name": "Elegoo PLA Translucent2",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFn2GlhY": {
-   "filaments": [
-    "Creality/Hyper PA6-CF"
-   ],
-   "name": "Hyper PA6-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFn6WpN7": {
-   "filaments": [
-    "Qidi/QIDI PA12-CF"
-   ],
-   "name": "QIDI PA12-CF",
-   "filament_type": "PA12-CF",
-   "filament_vendor": "QIDI"
-  },
-  "OFnBvPhb": {
-   "filaments": [
-    "BBL/addnorth PLA rPLA RE-ADD"
-   ],
-   "name": "addnorth PLA rPLA RE-ADD",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFnHc3D6": {
-   "filaments": [
-    "Creality/eSUN PLA-CF"
-   ],
-   "name": "eSUN PLA-CF",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "eSUN"
-  },
-  "OFnO4wnf": {
-   "filaments": [
-    "Prusa/Prusament PLA"
-   ],
-   "name": "Prusament PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFnSeLHk": {
-   "filaments": [
-    "CoLiDo/CoLiDo PLA Silk"
-   ],
-   "name": "CoLiDo PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "CoLiDo"
-  },
-  "OFnT7Qpb": {
-   "filaments": [
-    "Prusa/Generic TPU HF"
-   ],
-   "name": "Generic TPU HF",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OFnXrkhA": {
-   "filaments": [
-    "InfiMech/InfiMech PA-CF"
-   ],
-   "name": "InfiMech PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "InfiMech"
-  },
-  "OFnXwW8l": {
-   "filaments": [
-    "Snapmaker/PolyLite PLA Pro Metallic"
-   ],
-   "name": "PolyLite PLA Pro Metallic",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFnYVFk2": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Azul Francia"
-   ],
-   "name": "FilAr PLA Azul Francia",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFncpm7O": {
-   "filaments": [
-    "WonderMaker/WonderMaker PLA Silk"
-   ],
-   "name": "WonderMaker PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFneOFWe": {
-   "filaments": [
-    "CoLiDo/CoLiDo ABS"
-   ],
-   "name": "CoLiDo ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "CoLiDo"
-  },
-  "OFnejEt4": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Cian"
-   ],
-   "name": "FilAr PETG Cian",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFnfxTvi": {
-   "filaments": [
-    "BBL/Bambu PLA Lite"
-   ],
-   "name": "Bambu PLA Lite",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFngcE81": {
-   "filaments": [
-    "LH/LHS TPU Foamy 78A"
-   ],
-   "name": "LHS TPU Foamy 78A",
-   "filament_type": "TPU",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFniMuTN": {
-   "filaments": [
-    "BBL/Bambu PA6-CF",
-    "OrcaFilamentLibrary/Bambu PA6-CF"
-   ],
-   "name": "Bambu PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFnmp2pO": {
-   "filaments": [
-    "Snapmaker/Snapmaker Breakaway Support For PLA"
-   ],
-   "name": "Snapmaker Breakaway Support For PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFnmp6rt": {
-   "filaments": [
-    "Anycubic/Anycubic PLA+"
-   ],
-   "name": "Anycubic PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFnpX8uh": {
-   "filaments": [
-    "BBL/BETA PETG Matte"
-   ],
-   "name": "BETA PETG Matte",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFnyHfcv": {
-   "filaments": [
-    "Ratrig/Generic ABS BigNozzle"
-   ],
-   "name": "Generic ABS BigNozzle",
-   "filament_type": "ABS",
-   "filament_vendor": "Generic"
-  },
-  "OFo15hcT": {
-   "filaments": [
-    "Qidi/QIDI PAHT-GF"
-   ],
-   "name": "QIDI PAHT-GF",
-   "filament_type": "PAHT-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFo2UF2C": {
-   "filaments": [
-    "BBL/Generic BVOH",
-    "Creality/Generic BVOH",
-    "Flashforge/Generic BVOH",
-    "OrcaFilamentLibrary/Generic BVOH",
-    "Tiertime/Generic BVOH"
-   ],
-   "name": "Generic BVOH",
-   "filament_type": "BVOH",
-   "filament_vendor": "Generic"
-  },
-  "OFo6n2pB": {
-   "filaments": [
-    "Anycubic/Anycubic PETG"
-   ],
-   "name": "Anycubic PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Anycubic"
-  },
-  "OFoBTKmn": {
-   "filaments": [
-    "Cubicon/Cubicon PETG"
-   ],
-   "name": "Cubicon PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Cubicon"
-  },
-  "OFoSknDB": {
-   "filaments": [
-    "OrcaFilamentLibrary/FILL3D PLA Turbo"
-   ],
-   "name": "FILL3D PLA Turbo",
-   "filament_type": "PLA",
-   "filament_vendor": "FILL3D"
-  },
-  "OFoYSJKi": {
-   "filaments": [
-    "Anker/Generic PETG-CF",
-    "BBL/Generic PETG-CF",
-    "Creality/Generic PETG-CF",
-    "Elegoo/Generic PETG-CF",
-    "Flashforge/Generic PETG-CF",
-    "OrcaArena/Generic PETG-CF",
-    "OrcaFilamentLibrary/Generic PETG-CF",
-    "Qidi/Generic PETG-CF",
-    "Tiertime/Generic PETG-CF"
-   ],
-   "name": "Generic PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Generic"
-  },
-  "OFobDOW5": {
-   "filaments": [
-    "Elegoo/Elegoo ASA",
-    "OrcaFilamentLibrary/Elegoo ASA"
-   ],
-   "name": "Elegoo ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFocyw69": {
-   "filaments": [
-    "BBL/AliZ PETG",
-    "OrcaFilamentLibrary/AliZ PETG"
-   ],
-   "name": "AliZ PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Aliz"
-  },
-  "OFoiVqVM": {
-   "filaments": [
-    "BBL/Bambu PLA Basic",
-    "OrcaFilamentLibrary/Bambu PLA Basic"
-   ],
-   "name": "Bambu PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFojbdhR": {
-   "filaments": [
-    "Flashforge/Flashforge ABS-GF"
-   ],
-   "name": "Flashforge ABS-GF",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "Flashforge"
-  },
-  "OForhBi4": {
-   "filaments": [
-    "Cubicon/Cubicon ABSk"
-   ],
-   "name": "Cubicon ABSk",
-   "filament_type": "ABS",
-   "filament_vendor": "Cubicon"
-  },
-  "OFovEIbw": {
-   "filaments": [
-    "BBL/Bambu PETG HF",
-    "OrcaFilamentLibrary/Bambu PETG HF"
-   ],
-   "name": "Bambu PETG HF",
-   "filament_type": "PETG",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFp4ETDP": {
-   "filaments": [
-    "Creality/CR-PLA"
-   ],
-   "name": "CR-PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Creality"
-  },
-  "OFp57RRC": {
-   "filaments": [
-    "Qidi/QIDI PPS-GF"
-   ],
-   "name": "QIDI PPS-GF",
-   "filament_type": "PPS-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFp9wdmf": {
-   "filaments": [
-    "Eryone/Eryone PA-CF"
-   ],
-   "name": "Eryone PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFpBlrvY": {
-   "filaments": [
-    "OrcaFilamentLibrary/Valment PLA Silk"
-   ],
-   "name": "Valment PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Valment"
-  },
-  "OFpDo5Ix": {
-   "filaments": [
-    "Cubicon/Cubicon ABS"
-   ],
-   "name": "Cubicon ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Cubicon"
-  },
-  "OFpPGSKG": {
-   "filaments": [
-    "BBL/SUNLU Silk PLA+",
-    "Flashforge/SUNLU Silk PLA+",
-    "OrcaFilamentLibrary/SUNLU Silk PLA+"
-   ],
-   "name": "SUNLU Silk PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFpPJSHE": {
-   "filaments": [
-    "Peopoly/Peopoly Lancer PETG-C"
-   ],
-   "name": "Peopoly Lancer PETG-C",
-   "filament_type": "PETG",
-   "filament_vendor": "Peopoly"
-  },
-  "OFpW4gdi": {
-   "filaments": [
-    "BBL/SUNLU PLA Matte",
-    "Flashforge/SUNLU PLA Matte",
-    "OrcaFilamentLibrary/SUNLU PLA Matte"
-   ],
-   "name": "SUNLU PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFpdjFI3": {
-   "filaments": [
-    "BBL/BETA PLA UV Color Change"
-   ],
-   "name": "BETA PLA UV Color Change",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFpu74Qe": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Eco"
-   ],
-   "name": "Snapmaker PLA Eco",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFpumhCM": {
-   "filaments": [
-    "Volumic/Volumic UNIVERSAL Ultra"
-   ],
-   "name": "Volumic UNIVERSAL Ultra",
-   "filament_type": "UNIV",
-   "filament_vendor": "Volumic"
-  },
-  "OFq0TY7C": {
-   "filaments": [
-    "Flashforge/Flashforge ASA-CF"
-   ],
-   "name": "Flashforge ASA-CF",
-   "filament_type": "ASA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFq8gfS4": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Negro Azabache"
-   ],
-   "name": "FilAr PETG Negro Azabache",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFq9svOz": {
-   "filaments": [
-    "BBL/Generic PPS",
-    "Creality/Generic PPS",
-    "Tiertime/Generic PPS"
-   ],
-   "name": "Generic PPS",
-   "filament_type": "PPS",
-   "filament_vendor": "Generic"
-  },
-  "OFqFRiLb": {
-   "filaments": [
-    "Ratrig/Generic PLA BigNozzle"
-   ],
-   "name": "Generic PLA BigNozzle",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFqGRZyH": {
-   "filaments": [
-    "BBL/Numakers PLA+",
-    "OrcaFilamentLibrary/Numakers PLA+"
-   ],
-   "name": "Numakers PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "Numakers"
-  },
-  "OFqHQNoZ": {
-   "filaments": [
-    "Elegoo/Elegoo TPU 95A",
-    "OrcaFilamentLibrary/Elegoo TPU 95A"
-   ],
-   "name": "Elegoo TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Elegoo"
-  },
-  "OFqINlYj": {
-   "filaments": [
-    "BBL/eSUN PLA+",
-    "Creality/eSUN PLA+",
-    "OrcaFilamentLibrary/eSUN PLA+"
-   ],
-   "name": "eSUN PLA+",
-   "filament_type": "PLA",
-   "filament_vendor": "eSUN"
-  },
-  "OFqTwtXM": {
-   "filaments": [
-    "BBL/addnorth PETG rPETG Matte"
-   ],
-   "name": "addnorth PETG rPETG Matte",
-   "filament_type": "PETG",
-   "filament_vendor": "addnorth"
-  },
-  "OFqcL5UF": {
-   "filaments": [
-    "Qidi/QIDI Support For PET/PA"
-   ],
-   "name": "QIDI Support For PET/PA",
-   "filament_type": "PA-S",
-   "filament_vendor": "QIDI"
-  },
-  "OFqtx549": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Celeste Cielo"
-   ],
-   "name": "FilAr PLA-mate Celeste Cielo",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFqw2PQA": {
-   "filaments": [
-    "BBL/Panchroma CoPE",
-    "OrcaFilamentLibrary/Panchroma CoPE",
-    "Snapmaker/Panchroma CoPE"
-   ],
-   "name": "Panchroma CoPE",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFrFBEfd": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Neon"
-   ],
-   "name": "Eolas Prints PLA Neon",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFrGJ4tR": {
-   "filaments": [
-    "Anycubic/Anycubic PLA Slik"
-   ],
-   "name": "Anycubic PLA Slik",
-   "filament_type": "PLA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFrKLeE3": {
-   "filaments": [
-    "BBL/Bambu PLA Metal",
-    "OrcaFilamentLibrary/Bambu PLA Metal"
-   ],
-   "name": "Bambu PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFrLiqiM": {
-   "filaments": [
-    "InfiMech/InfiMech PETG"
-   ],
-   "name": "InfiMech PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "InfiMech"
-  },
-  "OFrM4hdm": {
-   "filaments": [
-    "Creality/CR-PLA Carbon"
-   ],
-   "name": "CR-PLA Carbon",
-   "filament_type": "PLA-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFrOh600": {
-   "filaments": [
-    "BBL/Panchroma PLA Matte",
-    "Creality/Panchroma PLA Matte",
-    "OrcaFilamentLibrary/Panchroma PLA Matte",
-    "Snapmaker/Panchroma PLA Matte"
-   ],
-   "name": "Panchroma PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFrZDhVt": {
-   "filaments": [
-    "Flashforge/Flashforge ASA-GF"
-   ],
-   "name": "Flashforge ASA-GF",
-   "filament_type": "ASA-GF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFrdZ0cK": {
-   "filaments": [
-    "Creality/eSUN PETG+HS"
-   ],
-   "name": "eSUN PETG+HS",
-   "filament_type": "PETG",
-   "filament_vendor": "eSUN"
-  },
-  "OFrjacXf": {
-   "filaments": [
-    "Flashforge/Flashforge PET-CF"
-   ],
-   "name": "Flashforge PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFrqMlGt": {
-   "filaments": [
-    "BBL/BETA PETG"
-   ],
-   "name": "BETA PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFrr67nG": {
-   "filaments": [
-    "OrcaArena/Arena PC"
-   ],
-   "name": "Arena PC",
-   "filament_type": "PC",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFryjl35": {
-   "filaments": [
-    "Elegoo/Elegoo ASA-CF",
-    "OrcaFilamentLibrary/Elegoo ASA-CF"
-   ],
-   "name": "Elegoo ASA-CF",
-   "filament_type": "ASA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFsB2lxm": {
-   "filaments": [
-    "Elegoo/Elegoo PLA Matte",
-    "OrcaFilamentLibrary/Elegoo PLA Matte"
-   ],
-   "name": "Elegoo PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFsD974q": {
-   "filaments": [
-    "Volumic/Volumic PETG Ultra (Performance)"
-   ],
-   "name": "Volumic PETG Ultra (Performance)",
-   "filament_type": "PETG",
-   "filament_vendor": "Volumic"
-  },
-  "OFsDXRpS": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Piel"
-   ],
-   "name": "FilAr PLA Piel",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFsFo7ms": {
-   "filaments": [
-    "Volumic/Volumic PP Ultra"
-   ],
-   "name": "Volumic PP Ultra",
-   "filament_type": "PP",
-   "filament_vendor": "Volumic"
-  },
-  "OFsFon5l": {
-   "filaments": [
-    "BBL/Generic HIPS",
-    "Chuanying/Generic HIPS",
-    "Creality/Generic HIPS",
-    "Flashforge/Generic HIPS",
-    "OrcaFilamentLibrary/Generic HIPS",
-    "Tiertime/Generic HIPS"
-   ],
-   "name": "Generic HIPS",
-   "filament_type": "HIPS",
-   "filament_vendor": "Generic"
-  },
-  "OFsHSVZc": {
-   "filaments": [
-    "BBL/Bambu Support W",
-    "OrcaFilamentLibrary/Bambu Support W"
-   ],
-   "name": "Bambu Support W",
-   "filament_type": "PLA",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFsP8PKH": {
-   "filaments": [
-    "Z-Bolt/Generic ABS HT"
-   ],
-   "name": "Generic ABS HT",
-   "filament_type": "ABS",
-   "filament_vendor": "Generic"
-  },
-  "OFsRDvTM": {
-   "filaments": [
-    "Anycubic/Panchroma PLA",
-    "BBL/Panchroma PLA",
-    "OrcaFilamentLibrary/Panchroma PLA",
-    "Snapmaker/Panchroma PLA"
-   ],
-   "name": "Panchroma PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFsXQXbs": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Blanco Antartida"
-   ],
-   "name": "FilAr PETG Blanco Antartida",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFsijjtH": {
-   "filaments": [
-    "BBL/Generic PP-GF",
-    "OrcaFilamentLibrary/Generic PP-GF",
-    "Tiertime/Generic PP-GF"
-   ],
-   "name": "Generic PP-GF",
-   "filament_type": "PP-GF",
-   "filament_vendor": "Generic"
-  },
-  "OFsoykbm": {
-   "filaments": [
-    "OrcaFilamentLibrary/DREMC PA6-CF"
-   ],
-   "name": "DREMC PA6-CF",
-   "filament_type": "PA6-CF",
-   "filament_vendor": "DREMC"
-  },
-  "OFt0JbR7": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PLA Metal"
-   ],
-   "name": "Snapmaker J1 PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFt3HtlG": {
-   "filaments": [
-    "Qidi/QIDI ABS-GF"
-   ],
-   "name": "QIDI ABS-GF",
-   "filament_type": "ABS-GF",
-   "filament_vendor": "QIDI"
-  },
-  "OFt6e0US": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Amarillo Lima"
-   ],
-   "name": "FilAr PETG Amarillo Lima",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFt7SngH": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 ASA"
-   ],
-   "name": "Snapmaker J1 ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFtFtiS0": {
-   "filaments": [
-    "Snapmaker/Polymaker PETG Galaxy"
-   ],
-   "name": "Polymaker PETG Galaxy",
-   "filament_type": "PETG",
-   "filament_vendor": "Polymaker"
-  },
-  "OFtGC1ye": {
-   "filaments": [
-    "Artillery/Artillery PA-CF"
-   ],
-   "name": "Artillery PA-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Artillery"
-  },
-  "OFtKeKa9": {
-   "filaments": [
-    "OrcaArena/Arena PLA Tough"
-   ],
-   "name": "Arena PLA Tough",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFtOPlK6": {
-   "filaments": [
-    "OrcaArena/Arena PAHT-CF"
-   ],
-   "name": "Arena PAHT-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFtOoWIj": {
-   "filaments": [],
-   "name": "FilAr PLA-mate",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFtRn8X8": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast SBS"
-   ],
-   "name": "FDplast SBS",
-   "filament_type": "SBS",
-   "filament_vendor": "FDplast"
-  },
-  "OFtdVZpV": {
-   "filaments": [
-    "BBL/addnorth PLA X-PLA"
-   ],
-   "name": "addnorth PLA X-PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "addnorth"
-  },
-  "OFtefokm": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Blanco"
-   ],
-   "name": "FilAr PLA-mate Blanco",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFtkLO6q": {
-   "filaments": [
-    "BBL/Bambu TPU 90A"
-   ],
-   "name": "Bambu TPU 90A",
-   "filament_type": "TPU",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFtndTHe": {
-   "filaments": [
-    "BBL/BETA PETG-CF"
-   ],
-   "name": "BETA PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "BETA"
-  },
-  "OFtpXCCv": {
-   "filaments": [
-    "BBL/COEX ASA PRIME",
-    "OrcaFilamentLibrary/COEX ASA PRIME"
-   ],
-   "name": "COEX ASA PRIME",
-   "filament_type": "ASA",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFtr8eZw": {
-   "filaments": [
-    "OrcaFilamentLibrary/FDplast PLA"
-   ],
-   "name": "FDplast PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "FDplast"
-  },
-  "OFtudokz": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA Premium"
-   ],
-   "name": "Eolas Prints PLA Premium",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFtybfNX": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA Metal"
-   ],
-   "name": "Snapmaker PLA Metal",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFu08yGN": {
-   "filaments": [
-    "Volumic/Volumic PETG Ultra carbone"
-   ],
-   "name": "Volumic PETG Ultra carbone",
-   "filament_type": "PETG",
-   "filament_vendor": "Volumic"
-  },
-  "OFu0fjPJ": {
-   "filaments": [
-    "LH/LHS PC CF"
-   ],
-   "name": "LHS PC CF",
-   "filament_type": "PC",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFu1E4ur": {
-   "filaments": [
-    "Qidi/QIDI ASA-Aero"
-   ],
-   "name": "QIDI ASA-Aero",
-   "filament_type": "ASA-AERO",
-   "filament_vendor": "QIDI"
-  },
-  "OFu1evlr": {
-   "filaments": [
-    "BBL/Generic PCTG",
-    "Creality/Generic PCTG",
-    "OrcaFilamentLibrary/Generic PCTG",
-    "Ratrig/Generic PCTG",
-    "Tiertime/Generic PCTG"
-   ],
-   "name": "Generic PCTG",
-   "filament_type": "PCTG",
-   "filament_vendor": "Generic"
-  },
-  "OFuFEtKX": {
-   "filaments": [
-    "Flashforge/Flashforge PETG-CF"
-   ],
-   "name": "Flashforge PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFuJ49uH": {
-   "filaments": [
-    "Qidi/QIDI PETG Basic"
-   ],
-   "name": "QIDI PETG Basic",
-   "filament_type": "PETG",
-   "filament_vendor": "QIDI"
-  },
-  "OFuO0cAP": {
-   "filaments": [
-    "OrcaArena/Arena PETG-CF"
-   ],
-   "name": "Arena PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFuUuIhR": {
-   "filaments": [
-    "Elegoo/Elegoo PETG-CF",
-    "OrcaFilamentLibrary/Elegoo PETG-CF"
-   ],
-   "name": "Elegoo PETG-CF",
-   "filament_type": "PETG",
-   "filament_vendor": "Elegoo"
-  },
-  "OFuV79ru": {
-   "filaments": [
-    "Flashforge/Flashforge PA66-CF"
-   ],
-   "name": "Flashforge PA66-CF",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Flashforge"
-  },
-  "OFuWCQXN": {
-   "filaments": [
-    "BBL/COEX ABS PRIME",
-    "OrcaFilamentLibrary/COEX ABS PRIME"
-   ],
-   "name": "COEX ABS PRIME",
-   "filament_type": "ABS",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFuehn62": {
-   "filaments": [
-    "OrcaArena/Arena PLA Marble"
-   ],
-   "name": "Arena PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFufTAK9": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA-mate Negro"
-   ],
-   "name": "FilAr PLA-mate Negro",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFughwKn": {
-   "filaments": [
-    "Qidi/QIDI PLA Matte Basic"
-   ],
-   "name": "QIDI PLA Matte Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFujZSdh": {
-   "filaments": [
-    "Creality/Hyper PETG"
-   ],
-   "name": "Hyper PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "Creality"
-  },
-  "OFulOdT2": {
-   "filaments": [
-    "Flashforge/Generic TPU 85A"
-   ],
-   "name": "Generic TPU 85A",
-   "filament_type": "TPU",
-   "filament_vendor": "Generic"
-  },
-  "OFurdQxc": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Magenta"
-   ],
-   "name": "FilAr PETG Magenta",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFusbWjj": {
-   "filaments": [
-    "Creality/Hyper PETG-CF"
-   ],
-   "name": "Hyper PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Creality"
-  },
-  "OFuvOt0r": {
-   "filaments": [
-    "BBL/BETA PLA Basic"
-   ],
-   "name": "BETA PLA Basic",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFuxH0Uz": {
-   "filaments": [
-    "Volumic/Volumic FLEX93 Ultra"
-   ],
-   "name": "Volumic FLEX93 Ultra",
-   "filament_type": "TPU",
-   "filament_vendor": "Volumic"
-  },
-  "OFvD0Qqt": {
-   "filaments": [
-    "Ratrig/Generic PETG BigNozzle"
-   ],
-   "name": "Generic PETG BigNozzle",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OFvDbkFq": {
-   "filaments": [
-    "Prusa/Prusament PC Blend"
-   ],
-   "name": "Prusament PC Blend",
-   "filament_type": "PC",
-   "filament_vendor": "Prusa Polymers"
-  },
-  "OFvKUnLh": {
-   "filaments": [
-    "BBL/Bambu TPU 95A HF",
-    "OrcaFilamentLibrary/Bambu TPU 95A HF"
-   ],
-   "name": "Bambu TPU 95A HF",
-   "filament_type": "TPU",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFvLppPU": {
-   "filaments": [
-    "Creality/CR-Nylon"
-   ],
-   "name": "CR-Nylon",
-   "filament_type": "PA",
-   "filament_vendor": "Creality"
-  },
-  "OFvPPMxL": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PLA Verde FilAr"
-   ],
-   "name": "FilAr PLA Verde FilAr",
-   "filament_type": "PLA",
-   "filament_vendor": "FilAr"
-  },
-  "OFvTVZc3": {
-   "filaments": [
-    "BBL/COEX PETG",
-    "OrcaFilamentLibrary/COEX PETG"
-   ],
-   "name": "COEX PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFvVy7yo": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints TPU D60 UV Resistant"
-   ],
-   "name": "Eolas Prints TPU D60 UV Resistant",
-   "filament_type": "TPU",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFvaLVML": {
-   "filaments": [
-    "Flashforge/Flashforge HIPS"
-   ],
-   "name": "Flashforge HIPS",
-   "filament_type": "HIPS",
-   "filament_vendor": "Flashforge"
-  },
-  "OFvcIGee": {
-   "filaments": [
-    "BBL/addnorth TPU Pro Matte 85A"
-   ],
-   "name": "addnorth TPU Pro Matte 85A",
-   "filament_type": "TPU",
-   "filament_vendor": "addnorth"
-  },
-  "OFvdZ2bx": {
-   "filaments": [
-    "Qidi/QIDI WOOD Rapido"
-   ],
-   "name": "QIDI WOOD Rapido",
-   "filament_type": "PLA",
-   "filament_vendor": "QIDI"
-  },
-  "OFvgE0Zh": {
-   "filaments": [
-    "Elegoo/Elegoo PLA",
-    "OrcaFilamentLibrary/Elegoo PLA"
-   ],
-   "name": "Elegoo PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Elegoo"
-  },
-  "OFvmwTZE": {
-   "filaments": [
-    "Snapmaker/Snapmaker TPU 95A"
-   ],
-   "name": "Snapmaker TPU 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFvrXuV7": {
-   "filaments": [
-    "BBL/PolyLite ASA",
-    "OrcaFilamentLibrary/PolyLite ASA"
-   ],
-   "name": "PolyLite ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFvxIS9g": {
-   "filaments": [
-    "BBL/Fiberon PA12-CF10",
-    "Snapmaker/Fiberon PA12-CF10"
-   ],
-   "name": "Fiberon PA12-CF10",
-   "filament_type": "PA-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFvxghTE": {
-   "filaments": [
-    "Chuanying/Generic HS PLA",
-    "Flashforge/Generic HS PLA",
-    "TwoTrees/Generic HS PLA"
-   ],
-   "name": "Generic HS PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFvyB0Bz": {
-   "filaments": [
-    "BBL/PolyLite PLA Galaxy",
-    "Snapmaker/PolyLite PLA Galaxy"
-   ],
-   "name": "PolyLite PLA Galaxy",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFvzvwCu": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PLA High Speed"
-   ],
-   "name": "Eolas Prints PLA High Speed",
-   "filament_type": "PLA",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFw4WD4T": {
-   "filaments": [
-    "BBL/Fiberon PETG-rCF08"
-   ],
-   "name": "Fiberon PETG-rCF08",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFwJ0qu2": {
-   "filaments": [],
-   "name": "DREMC PET-CF",
-   "filament_type": "PET-CF",
-   "filament_vendor": "DREMC"
-  },
-  "OFwLBAGf": {
-   "filaments": [
-    "Qidi/HATCHBOX ABS"
-   ],
-   "name": "HATCHBOX ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "HATCHBOX"
-  },
-  "OFwPrlCM": {
-   "filaments": [
-    "BBL/Bambu PETG Translucent",
-    "OrcaFilamentLibrary/Bambu PETG Translucent"
-   ],
-   "name": "Bambu PETG Translucent",
-   "filament_type": "PETG",
-   "filament_vendor": "Bambu Lab"
-  },
-  "OFwRJ4g0": {
-   "filaments": [
-    "OrcaFilamentLibrary/NIT PLA"
-   ],
-   "name": "NIT PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "NIT"
-  },
-  "OFwVVKEV": {
-   "filaments": [
-    "FlyingBear/Other TPU",
-    "InfiMech/Other TPU"
-   ],
-   "name": "Other TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Other"
-  },
-  "OFwaYjL6": {
-   "filaments": [
-    "BBL/Fiberon PA6-GF",
-    "OrcaFilamentLibrary/Fiberon PA6-GF"
-   ],
-   "name": "Fiberon PA6-GF",
-   "filament_type": "PA-GF",
-   "filament_vendor": "Polymaker"
-  },
-  "OFwc74ck": {
-   "filaments": [
-    "BBL/BETA PLA Matte"
-   ],
-   "name": "BETA PLA Matte",
-   "filament_type": "PLA",
-   "filament_vendor": "BETA"
-  },
-  "OFwhLMs4": {
-   "filaments": [
-    "Snapmaker/Snapmaker PLA SnapSpeed"
-   ],
-   "name": "Snapmaker PLA SnapSpeed",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFwjMiKL": {
-   "filaments": [
-    "Flashforge/Flashforge PETG Transparent"
-   ],
-   "name": "Flashforge PETG Transparent",
-   "filament_type": "PETG",
-   "filament_vendor": "Flashforge"
-  },
-  "OFwlZ7gH": {
-   "filaments": [
-    "Flashforge/Flashforge TPU-90A"
-   ],
-   "name": "Flashforge TPU-90A",
-   "filament_type": "TPU-90A",
-   "filament_vendor": "Flashforge"
-  },
-  "OFwu7IAG": {
-   "filaments": [
-    "BBL/COEX PCTG PRIME",
-    "OrcaFilamentLibrary/COEX PCTG PRIME"
-   ],
-   "name": "COEX PCTG PRIME",
-   "filament_type": "PCTG",
-   "filament_vendor": "COEX 3D"
-  },
-  "OFwwAQnA": {
-   "filaments": [
-    "Prusa/Generic PC HF"
-   ],
-   "name": "Generic PC HF",
-   "filament_type": "PC",
-   "filament_vendor": "Generic"
-  },
-  "OFwyt1xt": {
-   "filaments": [
-    "Eryone/Eryone ASA-CF"
-   ],
-   "name": "Eryone ASA-CF",
-   "filament_type": "ASA-CF",
-   "filament_vendor": "Eryone"
-  },
-  "OFx0WlzS": {
-   "filaments": [
-    "Flashforge/Flashforge TPU-95A"
-   ],
-   "name": "Flashforge TPU-95A",
-   "filament_type": "TPU-95A",
-   "filament_vendor": "Flashforge"
-  },
-  "OFx8Lmsd": {
-   "filaments": [
-    "OrcaFilamentLibrary/Eolas Prints PETG UV Resistant"
-   ],
-   "name": "Eolas Prints PETG UV Resistant",
-   "filament_type": "PETG",
-   "filament_vendor": "Eolas Prints"
-  },
-  "OFxA1p01": {
-   "filaments": [
-    "BBL/Overture PLA Pro",
-    "OrcaFilamentLibrary/Overture PLA Pro"
-   ],
-   "name": "Overture PLA Pro",
-   "filament_type": "PLA",
-   "filament_vendor": "Overture"
-  },
-  "OFxDHUX8": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC PETG"
-   ],
-   "name": "SeeMeCNC PETG",
-   "filament_type": "PETG",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OFxJRuVF": {
-   "filaments": [
-    "Anycubic/Anycubic PC-GF"
-   ],
-   "name": "Anycubic PC-GF",
-   "filament_type": "PC-GF",
-   "filament_vendor": "Anycubic"
-  },
-  "OFxOHhZw": {
-   "filaments": [
-    "Elegoo/Elegoo ABS",
-    "OrcaFilamentLibrary/Elegoo ABS"
-   ],
-   "name": "Elegoo ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Elegoo"
-  },
-  "OFxUwUeW": {
-   "filaments": [
-    "BBL/SUNLU PLA Marble",
-    "Flashforge/SUNLU PLA Marble",
-    "OrcaFilamentLibrary/SUNLU PLA Marble"
-   ],
-   "name": "SUNLU PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "SUNLU"
-  },
-  "OFxYB4Sw": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 PETG-CF"
-   ],
-   "name": "Snapmaker J1 PETG-CF",
-   "filament_type": "PETG-CF",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFxe4rXr": {
-   "filaments": [
-    "BBL/PolyTerra PLA Marble",
-    "Snapmaker/PolyTerra PLA Marble"
-   ],
-   "name": "PolyTerra PLA Marble",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFxqf79Q": {
-   "filaments": [
-    "BBL/BETA PETG HF"
-   ],
-   "name": "BETA PETG HF",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFy02QHU": {
-   "filaments": [
-    "BBL/PolyLite PLA Translucent",
-    "Snapmaker/PolyLite PLA Translucent"
-   ],
-   "name": "PolyLite PLA Translucent",
-   "filament_type": "PLA",
-   "filament_vendor": "Polymaker"
-  },
-  "OFy14TRA": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 ABS"
-   ],
-   "name": "Snapmaker J1 ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFy3sW6j": {
-   "filaments": [
-    "WonderMaker/WonderMaker ASA"
-   ],
-   "name": "WonderMaker ASA",
-   "filament_type": "ASA",
-   "filament_vendor": "WonderMaker"
-  },
-  "OFy48TOp": {
-   "filaments": [
-    "Flashforge/Generic TPU-95A"
-   ],
-   "name": "Generic TPU-95A",
-   "filament_type": "TPU-95A",
-   "filament_vendor": "Generic"
-  },
-  "OFy8tYJE": {
-   "filaments": [
-    "Cubicon/Cubicon ABS-A100"
-   ],
-   "name": "Cubicon ABS-A100",
-   "filament_type": "ABS",
-   "filament_vendor": "Cubicon"
-  },
-  "OFyFyLIp": {
-   "filaments": [
-    "SeeMeCNC/SeeMeCNC TPU"
-   ],
-   "name": "SeeMeCNC TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "SeeMeCNC"
-  },
-  "OFyHgT60": {
-   "filaments": [
-    "OrcaArena/Arena PLA Sparkle"
-   ],
-   "name": "Arena PLA Sparkle",
-   "filament_type": "PLA",
-   "filament_vendor": "Orca Arena"
-  },
-  "OFyJjkek": {
-   "filaments": [
-    "BBL/addnorth TPU Pro Matte 95A"
-   ],
-   "name": "addnorth TPU Pro Matte 95A",
-   "filament_type": "TPU",
-   "filament_vendor": "addnorth"
-  },
-  "OFyLWVF3": {
-   "filaments": [
-    "Creality/Generic PETG-GF"
-   ],
-   "name": "Generic PETG-GF",
-   "filament_type": "PETG-GF",
-   "filament_vendor": "Generic"
-  },
-  "OFyPG8v2": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA Eco"
-   ],
-   "name": "Snapmaker Dual PLA Eco",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFyPTnSk": {
-   "filaments": [
-    "BBL/BETA PETG Heat Color Change"
-   ],
-   "name": "BETA PETG Heat Color Change",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFyQwdaM": {
-   "filaments": [
-    "Volumic/Volumic ABS Ultra (Performance)"
-   ],
-   "name": "Volumic ABS Ultra (Performance)",
-   "filament_type": "ABS",
-   "filament_vendor": "Volumic"
-  },
-  "OFyRCIMh": {
-   "filaments": [
-    "FlyingBear/Other PC",
-    "InfiMech/Other PC"
-   ],
-   "name": "Other PC",
-   "filament_type": "PC",
-   "filament_vendor": "Other"
-  },
-  "OFyUJI3q": {
-   "filaments": [
-    "Volumic/Volumic ABS Ultra"
-   ],
-   "name": "Volumic ABS Ultra",
-   "filament_type": "ABS",
-   "filament_vendor": "Volumic"
-  },
-  "OFybzvQN": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Gris Ceniza"
-   ],
-   "name": "FilAr PETG Gris Ceniza",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFyhjiNs": {
-   "filaments": [
-    "Snapmaker/Snapmaker PVA"
-   ],
-   "name": "Snapmaker PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFyj3m13": {
-   "filaments": [
-    "Snapmaker/Snapmaker Dual PLA Silk"
-   ],
-   "name": "Snapmaker Dual PLA Silk",
-   "filament_type": "PLA",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFymnal9": {
-   "filaments": [
-    "Sovol/Sovol Zero PETG HS Nozzle"
-   ],
-   "name": "Sovol Zero PETG HS Nozzle",
-   "filament_type": "PETG",
-   "filament_vendor": "Generic"
-  },
-  "OFyoBZdm": {
-   "filaments": [
-    "LH/LHS PLA"
-   ],
-   "name": "LHS PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFyreocX": {
-   "filaments": [
-    "Tiertime/Tiertime PVA"
-   ],
-   "name": "Tiertime PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Tiertime"
-  },
-  "OFyrnlUn": {
-   "filaments": [
-    "Snapmaker/Snapmaker J1 TPU"
-   ],
-   "name": "Snapmaker J1 TPU",
-   "filament_type": "TPU",
-   "filament_vendor": "Snapmaker"
-  },
-  "OFysxCep": {
-   "filaments": [
-    "OrcaFilamentLibrary/FilAr PETG Coral"
-   ],
-   "name": "FilAr PETG Coral",
-   "filament_type": "PETG",
-   "filament_vendor": "FilAr"
-  },
-  "OFyxayW4": {
-   "filaments": [
-    "BBL/AliZ PLA",
-    "OrcaFilamentLibrary/AliZ PLA"
-   ],
-   "name": "AliZ PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Aliz"
-  },
-  "OFz1a1fy": {
-   "filaments": [
-    "BBL/BETA PETG Metallic"
-   ],
-   "name": "BETA PETG Metallic",
-   "filament_type": "PETG",
-   "filament_vendor": "BETA"
-  },
-  "OFz5oHgf": {
-   "filaments": [
-    "MagicMaker/Generic PEEK"
-   ],
-   "name": "Generic PEEK",
-   "filament_type": "PEEK",
-   "filament_vendor": "Generic"
-  },
-  "OFzAWsca": {
-   "filaments": [
-    "Qidi/Qidi TPU 95A-HF"
-   ],
-   "name": "Qidi TPU 95A-HF",
-   "filament_type": "TPU",
-   "filament_vendor": "QIDI"
-  },
-  "OFzB4uOs": {
-   "filaments": [
-    "Sovol/Sovol Zero PLA Basic HS Nozzle"
-   ],
-   "name": "Sovol Zero PLA Basic HS Nozzle",
-   "filament_type": "PLA",
-   "filament_vendor": "Generic"
-  },
-  "OFzRtFM9": {
-   "filaments": [
-    "Prusa/Generic ASA HF"
-   ],
-   "name": "Generic ASA HF",
-   "filament_type": "ASA",
-   "filament_vendor": "Generic"
-  },
-  "OFzS7zt4": {
-   "filaments": [
-    "Anycubic/Anycubic PA"
-   ],
-   "name": "Anycubic PA",
-   "filament_type": "PA",
-   "filament_vendor": "Anycubic"
-  },
-  "OFzY7N3Z": {
-   "filaments": [
-    "Artillery/Artillery PLA"
-   ],
-   "name": "Artillery PLA",
-   "filament_type": "PLA",
-   "filament_vendor": "Artillery"
-  },
-  "OFzaq7Yg": {
-   "filaments": [
-    "BBL/BETA TPU 98A"
-   ],
-   "name": "BETA TPU 98A",
-   "filament_type": "TPU",
-   "filament_vendor": "BETA"
-  },
-  "OFzk5oAo": {
-   "filaments": [
-    "BBL/addnorth ABS rABS"
-   ],
-   "name": "addnorth ABS rABS",
-   "filament_type": "ABS",
-   "filament_vendor": "addnorth"
-  },
-  "OFzrUUxc": {
-   "filaments": [],
-   "name": "DREMC ABS",
-   "filament_type": "ABS",
-   "filament_vendor": "DREMC"
-  },
-  "OFztQ7rO": {
-   "filaments": [
-    "LH/LHS ABS"
-   ],
-   "name": "LHS ABS",
-   "filament_type": "ASA",
-   "filament_vendor": "LH Stinger"
-  },
-  "OFzwA5Z9": {
-   "filaments": [
-    "Flashforge/FusRock PET-GF"
-   ],
-   "name": "FusRock PET-GF",
-   "filament_type": "PET-GF",
-   "filament_vendor": "FusRock"
-  },
-  "OFzyIxba": {
-   "filaments": [
-    "BBL/Bambu PVA",
-    "OrcaFilamentLibrary/Bambu PVA"
-   ],
-   "name": "Bambu PVA",
-   "filament_type": "PVA",
-   "filament_vendor": "Bambu Lab"
-  }
- }
-}
diff --git a/scripts/flatpak/com.orcaslicer.OrcaSlicer.yml b/scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
index 48444ca5de..fa7c329b4b 100644
--- a/scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+++ b/scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
@@ -384,6 +384,17 @@ modules:
       - cmake --build build_flatpak --target generate_system_cache -j$FLATPAK_BUILDER_N_JOBS
       - ./scripts/build_preset_cache.sh -n -b build_flatpak /app/share/OrcaSlicer/profiles
 
+    # Built (not run) here via the action's run-tests, then shipped to a separate
+    # test job. Only the test sources compile; nothing installs to /app.
+    test-commands:
+      - cmake . -B build_flatpak -DBUILD_TESTS=ON
+      # A suite missing from this list fails the leg loudly, since ctest registers a
+      # <target>_NOT_BUILT test for it. (tests/all is a Ninja subdirectory target and
+      # this build uses the default Makefile generator, so it is not available here.)
+      - cmake --build build_flatpak -j"${FLATPAK_BUILDER_N_JOBS:-$(nproc)}" --target
+          libslic3r_tests fff_print_tests sla_print_tests libnest2d_tests slic3rutils_tests
+          filament_group_tests
+
     cleanup:
       - /include
 
@@ -420,6 +431,10 @@ modules:
       - type: dir
         path: ../../localization
         dest: localization
+      # For the post-build unit-test step (BUILD_TESTS=ON); not built by the app.
+      - type: dir
+        path: ../../tests
+        dest: tests
 
       - type: file
         path: ../../CMakeLists.txt
@@ -433,6 +448,9 @@ modules:
       - type: file
         path: ../build_preset_cache.sh
         dest: scripts
+      - type: file
+        path: ../run_unit_tests.sh
+        dest: scripts
 
       # AppData metainfo for GNOME Software & Co.
       - type: file
diff --git a/scripts/orca_extra_profile_check.py b/scripts/orca_extra_profile_check.py
deleted file mode 100644
index e95e2c29e8..0000000000
--- a/scripts/orca_extra_profile_check.py
+++ /dev/null
@@ -1,660 +0,0 @@
-import os
-import json
-import argparse
-from pathlib import Path
-
-from orca_id_tool import generate_preset_setting_id, check_filament_ids
-
-OBSOLETE_KEYS = {
-    "acceleration", "scale", "rotate", "duplicate", "duplicate_grid",
-    "bed_size", "print_center", "g0", "wipe_tower_per_color_wipe",
-    "support_sharp_tails", "support_remove_small_overhangs", "support_with_sheath",
-    "tree_support_collision_resolution", "tree_support_with_infill",
-    "max_volumetric_speed", "max_print_speed", "support_closing_radius",
-    "remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
-    "support_transition_line_width", "support_transition_speed", "bed_temperature",
-    "bed_temperature_initial_layer", "can_switch_nozzle_type", "can_add_auxiliary_fan",
-    "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height",
-    "z_hop_type", "z_lift_type", "bed_temperature_difference", "long_retraction_when_cut",
-    "retraction_distance_when_cut", "extruder_type", "internal_bridge_support_thickness",
-    "extruder_clearance_max_radius", "top_area_threshold", "reduce_wall_solid_infill",
-    "filament_load_time", "filament_unload_time", "smooth_coefficient",
-    "overhang_totally_speed", "silent_mode", "overhang_speed_classic"
-}
-
-# Utility functions for printing messages in different colors.
-def print_error(msg):
-    print(f"\033[91m[ERROR]\033[0m {msg}")  # Red
-
-def print_warning(msg):
-    print(f"\033[93m[WARNING]\033[0m {msg}")  # Yellow
-
-def print_info(msg):
-    print(f"\033[94m[INFO]\033[0m {msg}")  # Blue
-
-def print_success(msg):
-    print(f"\033[92m[SUCCESS]\033[0m {msg}")  # Green
-
-
-# Add helper function for duplicate key detection.
-def no_duplicates_object_pairs_hook(pairs):
-    seen = {}
-    for key, value in pairs:
-        if key in seen:
-            raise ValueError(f"Duplicate key detected: {key}")
-        seen[key] = value
-    return seen
-
-# NOTE: currently Orca expects compatible_printers to be a defined in every instantiation profile, inheritation is not supported in Profile page
-def check_filament_compatible_printers(vendor, vendor_folder):
-    """
-    Checks JSON files in the vendor folder for missing or empty 'compatible_printers'
-    when 'instantiation' is flagged as true.
-
-    In the OrcaFilamentLibrary 'compatible_printers' is optional: a profile without it is generic and
-    offered on every printer, while a profile that lists printers supersedes the generic one there.
-
-    Parameters:
-        vendor (str): The vendor name the folder belongs to.
-        vendor_folder (str or Path): The directory to search for JSON profile files.
-
-    Returns:
-        int: The number of profiles with missing or empty 'compatible_printers'.
-    """
-    error = 0
-    vendor_path = Path(vendor_folder)
-    if not vendor_path.exists():
-        return 0
-    
-    profiles = {}
-
-    # Use rglob to recursively find .json files.
-    for file_path in vendor_path.rglob("*.json"):
-        if file_path.name == 'filaments_color_codes.json': # Ignore non-profile file
-            continue
-
-        try:
-            with open(file_path, 'r', encoding='UTF-8') as fp:
-                # Use custom hook to detect duplicates.
-                data = json.load(fp, object_pairs_hook=no_duplicates_object_pairs_hook)
-        except ValueError as ve:
-            print_error(f"Duplicate key error in {file_path}: {ve}")
-            error += 1
-            continue
-        except Exception as e:
-            print_error(f"Error processing {file_path}: {e}")
-            error += 1
-            continue
-
-        profile_name = data['name']
-        if profile_name in profiles:
-            print_error(f"Duplicated profile {profile_name}: {file_path}")
-            error += 1
-            continue
-
-        profiles[profile_name] = {
-            'file_path': file_path,
-            'content': data,
-        }
-    
-    def get_property(profile, key):
-        content = profile['content']
-        if key in content:
-            return content[key]
-        return None
-
-    def get_inherit_property(profile, key):
-        content = profile['content']
-        if key in content:
-            return content[key]
-
-        if 'inherits' in content:
-            inherits = content['inherits']
-            if inherits not in profiles:
-                raise ValueError(f"Parent profile not found: {inherits}, referenced in {profile['file_path']}")
-            
-            return get_inherit_property(profiles[inherits], key)
-        
-        return None
-
-    for profile in profiles.values():
-        instantiation = str(profile['content'].get("instantiation", "")).lower() == "true"
-        if instantiation and vendor != 'OrcaFilamentLibrary':
-            try:
-                compatible_printers = get_property(profile, "compatible_printers")
-                if not compatible_printers or (isinstance(compatible_printers, list) and not compatible_printers):
-                    print_error(f"'compatible_printers' missing in {profile['file_path']}")
-                    error += 1
-            except ValueError as ve:
-                print_error(f"Unable to parse {profile['file_path']}: {ve}")
-                error += 1
-                continue
-
-    return error
-
-def load_available_filament_profiles(profiles_dir, vendor_name):
-    """
-    Load all available filament profiles from a vendor's directory.
-    
-    Parameters:
-        profiles_dir (Path): The directory containing vendor profile directories
-        vendor_name (str): The name of the vendor directory
-        
-    Returns:
-        set: A set of filament profile names
-    """
-    profiles = set()
-    vendor_path = profiles_dir / vendor_name / "filament"
-    
-    if not vendor_path.exists():
-        return profiles
-    
-    for file_path in vendor_path.rglob("*.json"):
-        try:
-            with open(file_path, 'r', encoding='UTF-8') as fp:
-                data = json.load(fp)
-                if "name" in data:
-                    profiles.add(data["name"])
-        except Exception as e:
-            print_error(f"Error loading filament profile {file_path}: {e}")
-    
-    return profiles
-
-def check_machine_default_materials(profiles_dir, vendor_name):
-    """
-    Checks if default materials referenced in machine profiles exist in 
-    the vendor's filament library or in the global OrcaFilamentLibrary.
-    
-    Parameters:
-        profiles_dir (Path): The base profiles directory
-        vendor_name (str): The vendor name to check
-        
-    Returns:
-        int: Number of missing filament references found
-        int: the number of warnings found (0 or 1)
-    """
-    error_count = 0
-    machine_dir = profiles_dir / vendor_name / "machine"
-    
-    if not machine_dir.exists():
-        print_warning(f"No machine profiles found for vendor: {vendor_name}")
-        return 0, 1
-        
-    # Load available filament profiles
-    vendor_filaments = load_available_filament_profiles(profiles_dir, vendor_name)
-    global_filaments = load_available_filament_profiles(profiles_dir, "OrcaFilamentLibrary")
-    all_available_filaments = vendor_filaments.union(global_filaments)
-    
-    # Check each machine profile
-    for file_path in machine_dir.rglob("*.json"):
-        try:
-            with open(file_path, 'r', encoding='UTF-8') as fp:
-                data = json.load(fp)
-                
-            default_materials = None
-            if "default_materials" in data:
-                default_materials = data["default_materials"]
-            elif "default_filament_profile" in data:
-                default_materials = data["default_filament_profile"]
-                
-            if default_materials:
-                if isinstance(default_materials, list):
-                    for material in default_materials:
-                        if material not in all_available_filaments:
-                            print_error(f"Missing filament profile: '{material}' referenced in {file_path.relative_to(profiles_dir)}")
-                            error_count += 1
-                else:
-                    # Handle semicolon-separated list of materials in a string
-                    if ";" in default_materials:
-                        for material in default_materials.split(";"):
-                            material = material.strip()
-                            if material and material not in all_available_filaments:
-                                print_error(f"Missing filament profile: '{material}' referenced in {file_path.relative_to(profiles_dir)}")
-                                error_count += 1
-                    else:
-                        # Single material in a string
-                        if default_materials not in all_available_filaments:
-                            print_error(f"Missing filament profile: '{default_materials}' referenced in {file_path.relative_to(profiles_dir)}")
-                            error_count += 1
-                        
-        except Exception as e:
-            print_error(f"Error processing machine profile {file_path}: {e}")
-            error_count += 1
-            
-    return error_count, 0
-
-def check_name_consistency(profiles_dir, vendor_name):
-    """
-    Make sure filament profile names match in both vendor json and subpath files.
-    Filament profiles work only if the name in <vendor>.json matches the name in sub_path file,
-    or if it's one of the sub_path file's `renamed_from`.
-
-    Parameters:
-        profiles_dir (Path): Base profiles directory
-        vendor_name (str): Vendor name
-
-    Returns:
-        int: Number of errors found
-        int: Number of warnings found (0 or 1)
-    """
-    error_count = 0
-    vendor_dir = profiles_dir / vendor_name
-    vendor_file = profiles_dir / (vendor_name + ".json")
-    
-    if not vendor_file.exists():
-        print_warning(f"No profiles found for vendor: {vendor_name} at {vendor_file}")
-        return 0, 1
-    
-    try:
-        with open(vendor_file, 'r', encoding='UTF-8') as fp:
-            data = json.load(fp)
-    except Exception as e:
-        print_error(f"Error loading vendor profile {vendor_file}: {e}")
-        return 1, 0
-
-    for section in ['filament_list', 'machine_model_list', 'machine_list', 'process_list']:
-        if section not in data:
-            continue
-        
-        for child in data[section]:
-            name_in_vendor = child['name']
-            sub_path = child['sub_path']
-            sub_file = vendor_dir / sub_path
-
-            if not sub_file.exists():
-                print_error(f"Missing sub profile: '{sub_path}' declared in {vendor_file.relative_to(profiles_dir)}")
-                error_count += 1
-                continue
-
-            try:
-                with open(sub_file, 'r', encoding='UTF-8') as fp:
-                    sub_data = json.load(fp)
-            except Exception as e:
-                print_error(f"Error loading profile {sub_file}: {e}")
-                error_count += 1
-                continue
-
-            name_in_sub = sub_data['name']
-
-            if name_in_sub == name_in_vendor:
-                continue
-
-            # if 'renamed_from' in sub_data:
-            #     renamed_from = [n.strip() for n in sub_data['renamed_from'].split(';')]
-            #     if name_in_vendor in renamed_from:
-            #         continue
-
-            print_error(f"{section} name mismatch: required '{name_in_vendor}' in {vendor_file.relative_to(profiles_dir)} but found '{name_in_sub}' in {sub_file.relative_to(profiles_dir)}")
-            error_count += 1
-    
-    return error_count, 0
-
-def check_filament_id(profiles_dir, vendor_name):
-    """
-    Make sure filament_id is not longer than 8 characters, otherwise AMS won't work properly.
-
-    Runs tree-wide, every vendor alike (BBL included: the id format is what
-    matters, not the vendor). Every .json file under the vendor's filament
-    directory is still parsed through the duplicate-key hook below, so that
-    coverage is unchanged; only the length rule itself is scoped to presets
-    the vendor's index (<vendor>.json filament_list) actually references. A
-    file the index does not reference never loads, so its filament_id length
-    cannot break AMS -- and some vendors (e.g. SeeMeCNC) ship such orphaned
-    files pre-dating this check, with no bearing on what ships.
-    """
-    error = 0
-    vendor_path = profiles_dir / vendor_name / "filament"
-    if not vendor_path.exists():
-        return 0
-
-    referenced = set()
-    vendor_file = profiles_dir / (vendor_name + ".json")
-    if vendor_file.exists():
-        try:
-            with open(vendor_file, 'r', encoding='UTF-8') as fp:
-                index = json.load(fp)
-            for entry in index.get('filament_list', []):
-                sub_path = entry.get('sub_path')
-                if sub_path:
-                    referenced.add((profiles_dir / vendor_name / sub_path).resolve())
-        except Exception as e:
-            print_error(f"Error loading vendor profile {vendor_file}: {e}")
-            error += 1
-
-    # Use rglob to recursively find .json files.
-    for file_path in vendor_path.rglob("*.json"):
-        try:
-            with open(file_path, 'r', encoding='UTF-8') as fp:
-                # Use custom hook to detect duplicates.
-                data = json.load(fp, object_pairs_hook=no_duplicates_object_pairs_hook)
-        except ValueError as ve:
-            print_error(f"Duplicate key error in {file_path}: {ve}")
-            error += 1
-            continue
-        except Exception as e:
-            print_error(f"Error processing {file_path}: {e}")
-            error += 1
-            continue
-
-        if 'filament_id' not in data:
-            continue
-
-        filament_id = data['filament_id']
-
-        if len(filament_id) > 8 and file_path.resolve() in referenced:
-            error += 1
-            print_error(f"Filament id too long \"{filament_id}\": {file_path}")
-
-    return error
-
-def check_obsolete_keys(profiles_dir, vendor_name):
-    """
-    Check for obsolete keys in all filament profiles for a vendor.
-
-    Parameters:
-        profiles_dir (Path): Base profiles directory
-        vendor_name (str): Vendor name
-        obsolete_keys (set): Set of obsolete key names to check
-
-    Returns:
-        int: Number of obsolete keys found
-    """
-    error_count = 0
-    vendor_path = profiles_dir / vendor_name / "filament"
-
-    if not vendor_path.exists():
-        return 0
-
-    for file_path in vendor_path.rglob("*.json"):
-        try:
-            with open(file_path, "r", encoding="UTF-8") as fp:
-                data = json.load(fp)
-        except Exception as e:
-            print_warning(f"Error reading profile {file_path.relative_to(profiles_dir)}: {e}")
-            error_count += 1
-            continue
-
-        for key in data.keys():
-            if key in OBSOLETE_KEYS:
-                print_warning(f"Obsolete key: '{key}' found in {file_path.relative_to(profiles_dir)}")
-                error_count += 1
-
-    return error_count
-
-
-CONFLICT_KEYS = [
-    ['extruder_clearance_radius', 'extruder_clearance_max_radius'],
-]
-
-VECTOR_KEYS = {
-    "filament_type",
-}
-
-def check_vector_type_keys(profiles_dir, vendor_name):
-    """
-    Check that properties expected to be vectors (JSON arrays) are not stored as scalars.
-    For example, `filament_type` must be a list like ["PA-CF"], not a string "PA-CF".
-
-    Parameters:
-        profiles_dir (Path): Base profiles directory
-        vendor_name (str): Vendor name
-
-    Returns:
-        int: Number of errors found
-    """
-    error_count = 0
-    vendor_path = profiles_dir / vendor_name
-
-    if not vendor_path.exists():
-        return 0
-
-    for file_path in vendor_path.rglob("*.json"):
-        try:
-            with open(file_path, "r", encoding="UTF-8") as fp:
-                data = json.load(fp)
-        except Exception as e:
-            print_error(f"Error processing {file_path.relative_to(profiles_dir)}: {e}")
-            error_count += 1
-            continue
-
-        if not isinstance(data, dict):
-            continue
-
-        for key in VECTOR_KEYS:
-            if key in data and not isinstance(data[key], list):
-                print_error(
-                    f"'{key}' must be an array in {file_path.relative_to(profiles_dir)}, "
-                    f"got {type(data[key]).__name__}: {data[key]!r}"
-                )
-                error_count += 1
-
-    return error_count
-
-def check_conflict_keys(profiles_dir, vendor_name):
-    """
-    Check for keys that could not be specified at the same time,
-    due to option renaming & backward compatibility reasons.
-
-    For example, `extruder_clearance_max_radius` and `extruder_clearance_radius` cannot co-exist
-    otherwise slicer won't know which one to use.
-
-    Parameters:
-        profiles_dir (Path): Base profiles directory
-        vendor_name (str): Vendor name
-
-    Returns:
-        int: Number of errors found
-        int: Number of warnings found
-    """
-    error_count = 0
-    warn_count = 0
-    vendor_path = profiles_dir / vendor_name
-
-    if not vendor_path.exists():
-        print_warning(f"No machine profiles found for vendor: {vendor_name}")
-        return 0, 1
-
-    for file_path in vendor_path.rglob("*.json"):
-        try:
-            with open(file_path, 'r', encoding='UTF-8') as fp:
-                # Use custom hook to detect duplicates.
-                data = json.load(fp, object_pairs_hook=no_duplicates_object_pairs_hook)
-        except ValueError as ve:
-            print_error(f"Duplicate key error in {file_path.relative_to(profiles_dir)}: {ve}")
-            error_count += 1
-            continue
-        except Exception as e:
-            print_error(f"Error processing {file_path.relative_to(profiles_dir)}: {e}")
-            error_count += 1
-            continue
-
-        for key_sets in CONFLICT_KEYS:
-            if sum([1 if k in data else 0 for k in key_sets]) > 1:
-                print_error(f"Conflict keys {key_sets} co-exist in {file_path.relative_to(profiles_dir)}")
-                error_count += 1
-
-    return error_count, warn_count
-
-
-# Bambu (BBL) keeps its authoritative "G*" cloud ids, which are NOT produced by the
-# deterministic formula, so BBL is exempt from the formula match (Rule 2) only. It is
-# still checked for presence, uniqueness, base-no-id and the typo key like every other
-# vendor. Every other vendor (incl. OrcaFilamentLibrary and Custom) must also match the
-# formula.
-SETTING_ID_FORMULA_EXEMPT_VENDORS = {"BBL"}
-PROFILE_SUBDIRS = ("filament", "process", "machine")
-
-
-def check_setting_id_uniqueness(profiles_dir):
-    """
-    Validate setting_id across every vendor (see scripts/orca_id_tool.py):
-      1. Every instantiated preset must HAVE a setting_id.            (all vendors)
-      2. A stored setting_id must equal generate_preset_setting_id(vendor, type, name); a stale
-         value means the JSON was edited without rerunning
-         "python scripts/orca_id_tool.py --generate --setting-id".
-         (all vendors EXCEPT the formula-exempt ones, e.g. BBL)
-      3. Base profiles (instantiation != "true") must not carry a setting_id.  (all vendors)
-      4. setting_id must be globally unique - no two files may share one.       (all vendors)
-      5. No profile may use the misspelled key "settings_id".                    (all vendors)
-    Formula-exempt vendors (BBL) keep their authoritative ids, so only Rule 2 is skipped
-    for them; they are still held to presence, uniqueness, base-no-id and the typo check.
-    """
-    errors = 0
-    owners = {}  # setting_id -> list of relative_path (every vendor)
-    for vendor_dir in sorted(profiles_dir.iterdir()):
-        if not vendor_dir.is_dir():
-            continue
-        vendor = vendor_dir.name
-        formula_exempt = vendor in SETTING_ID_FORMULA_EXEMPT_VENDORS
-        for sub in PROFILE_SUBDIRS:
-            base = vendor_dir / sub
-            if not base.is_dir():
-                continue
-            for file_path in base.rglob("*.json"):
-                try:
-                    data = json.loads(file_path.read_bytes())
-                except (ValueError, OSError):
-                    continue
-                if not isinstance(data, dict):
-                    continue
-                rel = file_path.relative_to(profiles_dir)
-                # Rule 5: catch the misspelled "settings_id" key.
-                if "settings_id" in data:
-                    errors += 1
-                    print_error(
-                        f'profile {rel} uses the misspelled key "settings_id" '
-                        f'(should be "setting_id"); run '
-                        f'"python scripts/orca_id_tool.py --generate --setting-id"'
-                    )
-                sid = data.get("setting_id")
-                instantiated = data.get("instantiation") == "true"
-                if not instantiated:
-                    # Rule 3: base/template profiles must not carry a setting_id.
-                    if sid:
-                        errors += 1
-                        print_error(
-                            f'base profile {rel} (instantiation != "true") must not have a '
-                            f'setting_id ("{sid}"); run '
-                            f'"python scripts/orca_id_tool.py --generate --setting-id"'
-                        )
-                    continue
-                # Rule 1: every instantiated preset must have a setting_id.
-                if not sid:
-                    errors += 1
-                    print_error(
-                        f"instantiated preset {rel} is missing a setting_id; "
-                        f'run "python scripts/orca_id_tool.py --generate --setting-id"'
-                    )
-                    continue
-                # Rule 2: the stored id must match the deterministic rule. BBL keeps its
-                # authoritative G* ids and is exempt from this check only.
-                if not formula_exempt:
-                    expected = generate_preset_setting_id(vendor, sub, data.get("name", ""))
-                    if sid != expected:
-                        errors += 1
-                        print_error(
-                            f'setting_id "{sid}" in {rel} does not match the expected '
-                            f'"{expected}" for {vendor}/{sub}/{data.get("name", "")}; '
-                            f'run "python scripts/orca_id_tool.py --generate --setting-id"'
-                        )
-                        continue
-                # Rule 4: collect for the global-uniqueness check below.
-                owners.setdefault(sid, []).append(rel)
-
-    # Rule 4: a setting_id shared by two files is an error. For managed vendors this means
-    # a duplicate vendor/type/name; for formula-exempt vendors (BBL) a copy-pasted id.
-    for sid, locs in sorted(owners.items()):
-        if len(locs) < 2:
-            continue
-        errors += 1
-        print_error(
-            f'setting_id "{sid}" is shared by {len(locs)} files ({sorted(map(str, locs))}); '
-            f"setting_id must be globally unique"
-        )
-    return errors
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Check 3D printer profiles for common issues",
-        formatter_class=argparse.ArgumentDefaultsHelpFormatter
-    )
-    parser.add_argument("--vendor", type=str, help="Specify a single vendor to check")
-    parser.add_argument("--check-filaments", action="store_true", help="Check 'compatible_printers' in filament profiles")
-    parser.add_argument("--check-materials", action="store_true", help="Check default materials in machine profiles")
-    parser.add_argument("--check-obsolete-keys", action="store_true", help="Warn if obsolete keys are found in filament profiles")
-    args = parser.parse_args()
-
-    print_info("Checking profiles ...")
-
-    script_dir = Path(__file__).resolve().parent
-    profiles_dir = script_dir.parent / "resources" / "profiles"
-    checked_vendor_count = 0
-    errors_found = 0
-    warnings_found = 0
-
-    def run_checks(vendor_name):
-        nonlocal errors_found, warnings_found, checked_vendor_count
-        vendor_path = profiles_dir / vendor_name
-
-        if args.check_filaments or not (args.check_materials and not args.check_filaments):
-            errors_found += check_filament_compatible_printers(vendor_name, vendor_path / "filament")
-
-        if args.check_materials:
-            new_errors, new_warnings = check_machine_default_materials(profiles_dir, vendor_name)
-            errors_found += new_errors
-            warnings_found += new_warnings
-
-        if args.check_obsolete_keys:
-            warnings_found += check_obsolete_keys(profiles_dir, vendor_name)
-
-        new_errors, new_warnings = check_name_consistency(profiles_dir, vendor_name)
-        errors_found += new_errors
-        warnings_found += new_warnings
-
-        new_errors, new_warnings = check_conflict_keys(profiles_dir, vendor_name)
-        errors_found += new_errors
-        warnings_found += new_warnings
-
-        errors_found += check_vector_type_keys(profiles_dir, vendor_name)
-
-        errors_found += check_filament_id(profiles_dir, vendor_name)
-        checked_vendor_count += 1
-
-    if args.vendor:
-        run_checks(args.vendor)
-    else:
-        for vendor_dir in profiles_dir.iterdir():
-            if not vendor_dir.is_dir() or vendor_dir.name == "OrcaFilamentLibrary":
-                continue
-            run_checks(vendor_dir.name)
-
-    # Global (cross-vendor) check: setting_id must be unique and stay in-namespace.
-    # Runs once over the whole tree regardless of the --vendor filter.
-    errors_found += check_setting_id_uniqueness(profiles_dir)
-
-    # Global filament_id check (see scripts/orca_id_tool.py): effective ids
-    # are resolved loader-faithfully and validated against the sanctioned snapshot
-    # (scripts/filament_id_snapshot.json). Runs once over the whole tree.
-    errors_found += check_filament_ids(profiles_dir)
-
-    # ✨ Output finale in stile "compilatore"
-    print("\n==================== SUMMARY ====================")
-    print_info(f"Checked vendors     : {checked_vendor_count}")
-    if errors_found > 0:
-        print_error(f"Files with errors   : {errors_found}")
-    else:
-        print_success("Files with errors   : 0")
-    if warnings_found > 0:
-        print_warning(f"Files with warnings : {warnings_found}")
-    else:
-        print_success("Files with warnings : 0")
-    print("=================================================")
-    if errors_found > 0 or warnings_found > 0 :
-        print_warning('Issue(s) found, try `orca_filament_lib.py --fix` to fix common issues automatically')
-
-    exit(-1 if errors_found > 0 else 0)
-
-
-if __name__ == "__main__":
-    main()
diff --git a/scripts/orca_filament_lib.py b/scripts/orca_filament_lib.py
deleted file mode 100644
index 65f037e3f3..0000000000
--- a/scripts/orca_filament_lib.py
+++ /dev/null
@@ -1,310 +0,0 @@
-import os
-import json
-import argparse
-from collections import defaultdict
-
-def create_ordered_profile(profile_dict, priority_fields=['name', 'type']):
-    """Create a new dictionary with priority fields first"""
-    ordered_profile = {}
-    
-    # Add priority fields first
-    for field in priority_fields:
-        if field in profile_dict:
-            ordered_profile[field] = profile_dict[field]
-    
-    # Add remaining fields
-    for key, value in profile_dict.items():
-        if key not in priority_fields:
-            ordered_profile[key] = value
-    
-    return ordered_profile
-
-def topological_sort(filaments):
-    # Build a graph of dependencies
-    graph = defaultdict(list)
-    in_degree = defaultdict(int)
-    name_to_filament = {f['name']: f for f in filaments}
-    all_names = set(name_to_filament.keys())
-    
-    # Create the dependency graph
-    processed_files = set()
-    for filament in filaments:
-        if 'inherits' in filament:
-            parent = filament['inherits']
-            child = filament['name']
-            # Only create dependency if parent exists
-            if parent in all_names:
-                graph[parent].append(child)
-                in_degree[child] += 1
-                if parent not in in_degree:
-                    in_degree[parent] = 0
-                processed_files.add(child)
-                processed_files.add(parent)
-
-    # Initialize queue with nodes having no dependencies (now sorted)
-    queue = sorted([name for name, degree in in_degree.items() if degree == 0])
-    result = []
-
-    # Process the queue
-    while queue:
-        current = queue.pop(0)
-        result.append(name_to_filament[current])
-        processed_files.add(current)
-        
-        # Process children (now sorted)
-        children = sorted(graph[current])
-        for child in children:
-            in_degree[child] -= 1
-            if in_degree[child] == 0:
-                queue.append(child)
-
-    # Add remaining files that weren't part of inheritance tree (now sorted)
-    remaining = sorted(all_names - processed_files)
-    for name in remaining:
-        result.append(name_to_filament[name])
-
-    return result
-
-def update_profile_library(vendor="",profile_type="filament"):
-    # change current working directory to the relative path(..\resources\profiles) compare to script location
-    os.chdir(os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles'))
-
-    # Collect current profile entries
-    if vendor:
-        vendors = [vendor]
-    else:
-        profiles_dir = os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles')
-        vendors = [f[:-5] for f in os.listdir(profiles_dir) if f.lower().endswith('.json')]
-    for vendor in vendors:
-        current_profiles = []
-        base_dir = vendor
-        # Orca expects machine_model to be in the machine folder
-        if profile_type == 'machine_model':
-            profile_dir = os.path.join(base_dir, 'machine')
-        else:
-            profile_dir = os.path.join(base_dir, profile_type)
-        
-        for root, dirs, files in os.walk(profile_dir):
-            for file in files:
-                if file.lower().endswith('.json'):
-                    full_path = os.path.join(root, file)
-                    
-                    # Get relative path from base directory
-                    sub_path = os.path.relpath(full_path, base_dir).replace('\\', '/')
-                    
-                    try:
-                        with open(full_path, 'r', encoding='utf-8') as f:
-                            _profile = json.load(f)
-                            if _profile.get('type') != profile_type:
-                                continue
-                            name = _profile.get('name')
-                            inherits = _profile.get('inherits')
-                            
-                            if name:
-                                entry = {
-                                    "name": name,
-                                    "sub_path": sub_path
-                                }
-                                if inherits:
-                                    entry['inherits'] = inherits
-                                current_profiles.append(entry)
-                            else:
-                                print(f"Warning: Missing 'name' in {full_path}")
-                    except Exception as e:
-                        print(f"Error reading {full_path}: {str(e)}")
-                        continue
-
-        # Sort profiles based on inheritance
-        sorted_profiles = topological_sort(current_profiles)
-        
-        # Remove the inherits field as it's not needed in the final JSON
-        for p in sorted_profiles:
-            p.pop('inherits', None)
-
-        # Update library file
-        lib_path = f'{vendor}.json'
-
-        profile_section = profile_type+'_list'
-        
-        try:
-            with open(lib_path, 'r+', encoding='utf-8') as f:
-                library = json.load(f)
-                library[profile_section] = sorted_profiles
-                f.seek(0)
-                json.dump(library, f, indent="\t", ensure_ascii=False)
-                f.write('\n')
-                f.truncate()
-                
-            print(f"Profile library for {vendor} updated successfully!")
-        except Exception as e:
-            print(f"Error updating library file: {str(e)}")
-
-def clean_up_profile(vendor="", profile_type="", force=False):
-# change current working directory to the relative path(..\resources\profiles) compare to script location
-    os.chdir(os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles'))
-
-    # Collect current profile entries
-    if vendor:
-        vendors = [vendor]
-    else:
-        profiles_dir = os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles')
-        vendors = [f[:-5] for f in os.listdir(profiles_dir) if f.lower().endswith('.json')]
-    for vendor in vendors:
-        current_profiles = []
-        base_dir = vendor
-        # Orca expects machine_model to be in the machine folder
-        if profile_type == 'machine_model':
-            profile_dir = os.path.join(base_dir, 'machine')
-        else:
-            profile_dir = os.path.join(base_dir, profile_type)
-        
-        for root, dirs, files in os.walk(profile_dir):
-            for file in files:
-                if file.lower().endswith('.json'):
-                    if file == 'filaments_color_codes.json': # Ignore non-profile file
-                        continue
-                    
-                    full_path = os.path.join(root, file)
-                    
-                    # Get relative path from base directory
-                    sub_path = os.path.relpath(full_path, base_dir).replace('\\', '/')
-                    
-                    try:
-                        with open(full_path, 'r+', encoding='utf-8') as f:
-                            _profile = json.load(f)
-                            need_update = False
-                            if not _profile.get('type') or _profile.get('type') == "":
-                                need_update = True
-                                name = _profile.get('name')
-                                inherits = _profile.get('inherits')
-                                if profile_type == "machine_model" or profile_type == "machine":
-                                    if "nozzle" in name or "Nozzle" in name:
-                                        _profile['type'] = "machine"
-                                    else:
-                                        _profile['type'] = "machine_model"
-                                else:
-                                    _profile['type'] = profile_type
-                                print(f"Added type: {_profile['type']} to {file}")
-
-                            fields_to_remove = ['version', 'is_custom_defined']
-                            for field in fields_to_remove:
-                                if _profile.get(field):
-                                    # remove version field
-                                    del _profile[field]
-                                    print(f"Removed {field} field from {file}")
-                                    need_update = True
-
-                            # Handle `extruder_clearance_radius`.
-                            if 'extruder_clearance_radius' in _profile and 'extruder_clearance_max_radius' in _profile:
-                                # BBS renamed `extruder_clearance_radius` to `extruder_clearance_max_radius`
-                                # however some of their profiles have both options exists with different value, which
-                                # could cause very bad consequence such as toolhead collision.
-                                # Here we make sure only one of these options exist, and if both present, we keep
-                                # the one with greater value.
-                                need_update = True
-                                if float(_profile['extruder_clearance_max_radius']) > float(_profile['extruder_clearance_radius']):
-                                    del _profile['extruder_clearance_radius']
-                                else:
-                                    del _profile['extruder_clearance_max_radius']
-
-                            # Convert filament fields to arrays if not already
-                            if profile_type == 'filament':
-                                fields_to_arrayify = ['filament_cost', 'filament_density', 'filament_type', "temperature_vitrification", "filament_max_volumetric_speed", "filament_vendor"]
-                                for field in fields_to_arrayify:
-                                    if field in _profile and not isinstance(_profile[field], list):
-                                        original_value = _profile[field]
-                                        _profile[field] = [original_value]
-                                        print(f"Converted {field} to array in {file}")
-                                        need_update = True
-
-                                # remove following fields from filament profile
-                                fields_to_remove = ['initial_layer_print_speed', 'outer_wall_speed', 'inner_wall_speed', 'infill_speed', 'top_surface_speed', 'travel_speed']
-                                for field in fields_to_remove:
-                                    if field in _profile:
-                                        del _profile[field]
-                                        print(f"Removed {field} field from {file}")
-                                        need_update = True
-
-
-                            if need_update or force:
-                                # write back to file
-                                f.seek(0)
-                                ordered_profile = create_ordered_profile(_profile, ['type', 'name', 'renamed_from', 'inherits', 'from', 'setting_id', 'filament_id', 'instantiation'])
-                                json.dump(ordered_profile, f, indent="\t", ensure_ascii=False)
-                                f.write('\n')
-                                f.truncate()
-                                print(f"Updated profile: {full_path}")
-                    except Exception as e:
-                        print(f"Error reading {full_path}: {str(e)}")
-                        continue
-
-# For each JSON file, it will:
-#    - Replace "BBL X1C" with "System" in the name field
-#    - Empty the compatible_printers array
-#    - Ensure setting_id starts with 'O'
-def rename_filament_system(vendor="OrcaFilamentLibrary"):
-    # change current working directory to the relative path
-    os.chdir(os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles'))
-    
-    base_dir = vendor
-    filament_dir = os.path.join(base_dir, 'filament')
-    
-    for root, dirs, files in os.walk(filament_dir):
-        for file in files:
-            if file.lower().endswith('.json'):
-                full_path = os.path.join(root, file)
-                try:
-                    with open(full_path, 'r', encoding='utf-8') as f:
-                        data = json.load(f)
-                        modified = False
-                        
-                        # Update name if it contains "BBL X1C"
-                        if 'name' in data and "BBL X1C" in data['name']:
-                            data['name'] = data['name'].replace("BBL X1C", "System")
-                            modified = True
-                            
-                        # Empty compatible_printers if exists
-                        if 'compatible_printers' in data:
-                            data['compatible_printers'] = []
-                            modified = True
-                            
-                        # Update setting_id if needed
-                        if 'setting_id' in data and not data['setting_id'].startswith('O'):
-                            data['setting_id'] = 'O' + data['setting_id']
-                            modified = True
-                        
-                        if modified:
-                            with open(full_path, 'w', encoding='utf-8') as f:
-                                json.dump(data, f, indent="\t", ensure_ascii=False)
-                                f.write('\n')
-                            print(f"Updated {full_path}")
-                            
-                except Exception as e:
-                    print(f"Error processing {full_path}: {str(e)}")
-
-if __name__ == '__main__':
-    parser = argparse.ArgumentParser(description='Update filament library for specified vendor')
-    parser.add_argument('-v', '--vendor', type=str, default="",
-                      help='Vendor name (default: "" which means all vendors)')
-    parser.add_argument('-u', '--update', action='store_true', help='update vendor.json')
-    parser.add_argument('-p', '--profile_type', type=str, choices=['machine_model', 'process', 'filament', 'machine'], help='profile type (default: "" which means all types)')
-    parser.add_argument('-f', '--fix', action='store_true', help='Fix errors like missing type field, and clean up the profile')
-    parser.add_argument('--force', action='store_true', help='Force update the profile files, for --fix option')
-    args = parser.parse_args()
-    
-    if args.fix:
-        if(args.profile_type):
-            clean_up_profile(args.vendor, args.profile_type, args.force)
-        else:
-            clean_up_profile(args.vendor, 'machine_model', args.force)
-            clean_up_profile(args.vendor, 'process', args.force)
-            clean_up_profile(args.vendor, 'filament', args.force)
-            clean_up_profile(args.vendor, 'machine', args.force)
-
-    if args.update:
-        update_profile_library(args.vendor, 'machine_model')
-        update_profile_library(args.vendor, 'process')
-        update_profile_library(args.vendor, 'filament')
-        update_profile_library(args.vendor, 'machine')
-    # else:
-        # rename_filament_system(args.vendor)
\ No newline at end of file
diff --git a/scripts/orca_id_tool.py b/scripts/orca_id_tool.py
deleted file mode 100755
index 956aec3569..0000000000
--- a/scripts/orca_id_tool.py
+++ /dev/null
@@ -1,1429 +0,0 @@
-#!/usr/bin/env python3
-"""
-Assign and validate the deterministic ids of OrcaSlicer system profiles: the
-per-product filament_id and the per-preset setting_id.
-
-Both ids are pure functions of the thing they name, so nothing here is ever
-invented: the tool only writes the id the rules below already imply, and a tree
-that already satisfies them is left untouched.
-
-filament_id policy (see docs/HLSD/filament_id.md):
-  * filament_id is a PRODUCT id: one named spool product = one id, shared by all
-    of that product's per-printer/per-nozzle variants in every bundle. The
-    granularity is the name on the spool, not the brand: "AAA PLA Lite" and
-    "AAA PLA Pro" are two products with two ids, not variants of one. The
-    id is a pure function of the product triple (below), so WHERE a preset gets
-    it from is irrelevant: it may declare the key itself or inherit it from any
-    ancestor — a root preset, a real (instantiated) filament, an
-    OrcaFilamentLibrary (OFL) preset — as long as the id it ends up with is the
-    mint of its OWN triple. Inheritance carries settings, never identity; the
-    key is bundle-independent, so moving a filament into OFL never changes it.
-  * Ids are content-addressed by the product triple, resolved from the preset's
-    flattened config (filament_vendor and filament_type are inheritable list
-    options — first element; filament name = preset base name):
-        filament_id = "OF" + base62_6( uuid5(FILAMENT_ID_NAMESPACE,
-            "filament_product/<filament_vendor>/<filament_type>/<filament_name>") )
-    8 chars total, which satisfies the AMS length limit. Nobody invents ids by
-    hand, and nothing but the triple feeds the mint — not the rest of the tree,
-    not the snapshot. Two products whose triples mint one id (a base62
-    collision; odds ~1e-5 over the whole tree) is an error --check reports and
-    --generate refuses to write; the remedy is a rename so the triples differ,
-    never a salted or hand-picked second id.
-    Identity changes (a filament rename, a filament_vendor/filament_type fix)
-    change the id BY DESIGN.
-  * Reserved id spaces that are never minted into or altered:
-      - GF*                    Bambu AMS/RFID catalog: frozen, no preset of any
-                               vendor (including BBL) may declare one; the
-                               generated resources/printers/bambu_filament_ids.json
-                               carries the correspondence instead
-      - QD_*                   Qidi device protocol: the box composes these ids
-                               at runtime, they are not preset ids, and no
-                               preset may declare one
-      - P + 7 hex chars (case-insensitive) and the literal "null"
-                               user-custom presets (CreatePresetsDialog.cpp)
-  * scripts/filament_id_snapshot.json is the sanctioned-state snapshot: one
-    entry per id, carrying the product triple it is minted from and the
-    "Vendor/Filament" presets claiming it. It must exactly equal the tree-derived
-    state at all times, so any id/claim/triple change shows up as a reviewable
-    diff to that file (the maintainer gate). It sanctions state, never
-    exceptions: no check consults it to excuse a preset from the rules above.
-
-setting_id policy (see AGENTS.md "Critical Constraints"):
-  * setting_id is a PRESET id, a pure function of the preset's identity:
-        setting_id = base62_16( uuid5(NAMESPACE, "<vendor>/<type>/<name>") )
-    The same value is recomputed on the fly by the C++ app
-    (Slic3r::generate_preset_setting_id); the two MUST stay byte-identical, and
-    the validator (orca_extra_profile_check.py) imports the rule from here.
-    Uniqueness is therefore automatic: two presets collide only if they share
-    vendor + type + name, which the validator flags.
-  * Only instantiated presets (instantiation == "true") carry a setting_id;
-    base / template profiles do not.
-  * Bambu (BBL) owns the authoritative "G*" setting_id space and is the only
-    reserved vendor: its setting_ids are never rewritten, which keeps
-    Bambu-synced presets backward compatible. filament_id has no such exemption
-    — the GF* catalog space is frozen and ownerless, so BBL's filament_ids are
-    minted like every other vendor's.
-
-The effective-id resolution below is loader-faithful (PresetBundle.cpp
-load_vendor_configs_from_json): own filament_id key, else walk `inherits` within
-the vendor map, with OrcaFilamentLibrary base-bundle fallback; once a chain enters
-OFL it stays in OFL; a vendor chain that dead-ends id-less retries its direct
-parent in the OFL map. filament_vendor / filament_type resolve the same way.
-
-Run from anywhere:
-  python scripts/orca_id_tool.py --generate         write the ids every profile should carry
-  python scripts/orca_id_tool.py --dry-run          preview that; writes nothing
-  python scripts/orca_id_tool.py --check            validate filament_id state (what CI runs)
-  python scripts/orca_id_tool.py --update-snapshot  re-record the sanctioned filament_id state
-Narrow --generate with --filament-id / --setting-id and --vendor VENDOR (repeatable).
-"""
-
-import argparse
-import json
-import os
-import re
-import sys
-import uuid
-
-# The id namespace baked into both Python and C++ (Slic3r::generate_preset_setting_id).
-# Dedicated, distinct from the cloud namespace (f47ac10b-...) so the two id spaces never
-# coincide; it is the root of BOTH id rules below — never change it.
-NAMESPACE = uuid.UUID("c1f4d9e2-7a3b-5c8d-9e0f-1a2b3c4d5e6f")
-ALPHABET = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"
-SETTING_ID_LENGTH = 16
-
-# Dedicated namespace for filament_id, derived from the setting_id namespace above.
-# Never change it.
-# FILAMENT_ID_NAMESPACE == UUID("c4d3ff49-4c32-5534-a3e3-00894157ab97")
-FILAMENT_ID_NAMESPACE = uuid.uuid5(NAMESPACE, "filament_id")
-FILAMENT_ID_LENGTH = 6  # base62 digits after the "OF" prefix -> 8 chars total
-
-SCRIPTS_DIR = os.path.dirname(os.path.abspath(__file__))
-PROFILES_DIR = os.path.normpath(os.path.join(SCRIPTS_DIR, "..", "resources", "profiles"))
-SNAPSHOT_PATH = os.path.join(SCRIPTS_DIR, "filament_id_snapshot.json")
-# The single source of truth for the map path; update_bambu_filament_ids.py
-# imports this rather than recomputing it.
-BAMBU_MAP_PATH = os.path.normpath(
-    os.path.join(SCRIPTS_DIR, "..", "resources", "printers", "bambu_filament_ids.json"))
-
-OFL = "OrcaFilamentLibrary"
-
-# Bambu (BBL) is the only vendor exempt from the setting_id rule: it keeps its
-# authoritative "G*" cloud ids. No vendor is exempt from the filament_id rule.
-RESERVED_VENDORS = {"BBL"}
-
-# The profile types that carry a setting_id; the subdir name is also the type
-# name, matching Preset::get_type_string() on the C++ side.
-PROFILE_SUBDIRS = ("filament", "process", "machine")
-
-OF_ID_RE = re.compile(r"^OF[0-9A-Za-z]{6}$")
-# User-custom id space minted by CreatePresetsDialog.cpp ("P" + md5(name)[0:7]);
-# reserved case-insensitively, together with its "null" sentinel.
-USER_CUSTOM_ID_RE = re.compile(r"^P[0-9A-Fa-f]{7}$", re.IGNORECASE)
-# Filament name = preset base name: strip the first "@..." suffix. The space before
-# "@" is optional because names like "Afinia PLA@HS" exist.
-BASE_NAME_RE = re.compile(r"\s?@.*$")
-# A JSON string literal, for the byte-preserving key edits.
-_JSON_STR = r'"(?:[^"\\]|\\.)*"'
-
-GENERATE_CMD = "python scripts/orca_id_tool.py --generate"
-UPDATE_HINT = 'run "python scripts/orca_id_tool.py --update-snapshot" and commit the diff for maintainer review'
-BAMBU_MAP_HINT = 'regenerate the map with "python scripts/update_bambu_filament_ids.py" and commit the diff for maintainer review'
-
-
-# Same output helpers/format as orca_extra_profile_check.py (not imported from
-# there to avoid a circular import: that script imports check_filament_ids).
-def print_error(msg):
-    print(f"\033[91m[ERROR]\033[0m {msg}")  # Red
-
-def print_warning(msg):
-    print(f"\033[93m[WARNING]\033[0m {msg}")  # Yellow
-
-def print_info(msg):
-    print(f"\033[94m[INFO]\033[0m {msg}")  # Blue
-
-def print_success(msg):
-    print(f"\033[92m[SUCCESS]\033[0m {msg}")  # Green
-
-
-def _utf8_console():
-    """Make stdout/stderr survive non-ASCII profile names on cp1252 consoles."""
-    for stream in (sys.stdout, sys.stderr):
-        if hasattr(stream, "reconfigure"):
-            try:
-                stream.reconfigure(encoding="utf-8", errors="replace")
-            except (ValueError, OSError):
-                pass
-
-
-# ---------------------------------------------------------------------------
-# Minting
-# ---------------------------------------------------------------------------
-
-def _base62_tail(n, length):
-    """The low `length` base62 digits of n, most-significant first.
-
-    The shared tail of both id rules. Its output bytes are pinned by the C++
-    golden vectors (tests/libslic3r/test_preset_setting_id.cpp) and by the
-    filament_id snapshot — never change it.
-    """
-    digits = []
-    for _ in range(length):
-        digits.append(ALPHABET[n % 62])
-        n //= 62
-    return "".join(reversed(digits))
-
-
-def generate_preset_setting_id(vendor, type_name, name):
-    """Deterministic 16-char base62 setting_id for a preset.
-
-    input = f"{vendor}/{type_name}/{name}"; u = uuid5(NAMESPACE, input);
-    id = the low SETTING_ID_LENGTH base62 digits of int(u.bytes, "big"),
-    most-significant first. Kept byte-identical to the C++
-    Slic3r::generate_preset_setting_id.
-    """
-    u = uuid.uuid5(NAMESPACE, f"{vendor}/{type_name}/{name}")
-    return _base62_tail(int.from_bytes(u.bytes, "big"), SETTING_ID_LENGTH)
-
-
-def base_name(name):
-    """Filament name of a preset: name with the first "@..." suffix stripped."""
-    return BASE_NAME_RE.sub("", name, count=1)
-
-
-def generate_filament_id(filament_vendor, filament_type, filament_name):
-    """Deterministic "OF" + 6-char base62 filament_id for a filament product.
-
-    The triple is the only input: no salt, no state, no second value.
-    input = "filament_product/<filament_vendor>/<filament_type>/<filament_name>";
-    u = uuid5(FILAMENT_ID_NAMESPACE, input); the id tail is the low
-    FILAMENT_ID_LENGTH base62 digits of int(u.bytes, "big"), most-significant
-    first — the same derivation as generate_preset_setting_id.
-    """
-    key = f"filament_product/{filament_vendor}/{filament_type}/{filament_name}"
-    u = uuid.uuid5(FILAMENT_ID_NAMESPACE, key)
-    return "OF" + _base62_tail(int.from_bytes(u.bytes, "big"), FILAMENT_ID_LENGTH)
-
-
-# ---------------------------------------------------------------------------
-# Tree loading + loader-faithful effective-id resolution
-# ---------------------------------------------------------------------------
-
-def load_json(path):
-    with open(path, "r", encoding="utf-8-sig") as f:
-        return json.load(f)
-
-
-def list_vendor_names(profiles_dir):
-    """Vendor bundles = subdirectories with a matching <name>.json index file.
-
-    (Ignores stray non-bundle entries such as the tracked "user" directory,
-    which has no user.json index.)
-    """
-    profiles_dir = str(profiles_dir)
-    return sorted(
-        os.path.splitext(f)[0] for f in os.listdir(profiles_dir)
-        if f.endswith(".json")
-        and os.path.isdir(os.path.join(profiles_dir, os.path.splitext(f)[0]))
-    )
-
-
-def list_profile_dirs(profiles_dir):
-    """Every vendor directory under the tree, index or not.
-
-    What the setting_id pass walks, and what orca_extra_profile_check.py walks:
-    setting_id is a per-file property, so a bundle whose index has not landed yet
-    must still be assignable — otherwise the validator flags files the tool
-    refuses to touch. (filament_id is driven by each bundle's filament_list
-    instead, hence list_vendor_names above.)
-    """
-    profiles_dir = str(profiles_dir)
-    return sorted(d for d in os.listdir(profiles_dir)
-                  if os.path.isdir(os.path.join(profiles_dir, d)))
-
-
-def iter_profile_files(vendor_dir):
-    """Yield (json path, type) under a vendor bundle, in a deterministic order."""
-    for sub in PROFILE_SUBDIRS:
-        base = os.path.join(vendor_dir, sub)
-        if not os.path.isdir(base):
-            continue
-        for root, dirs, files in os.walk(base):
-            dirs.sort()  # deterministic traversal across filesystems
-            for name in sorted(files):
-                if name.endswith(".json"):
-                    yield os.path.join(root, name), sub
-
-
-def load_vendor_filaments(profiles_dir, vendor):
-    """Load a vendor's filament presets from its index's filament_list.
-
-    Returns (presets dict name -> record, list of unreadable-file messages).
-    """
-    profiles_dir = str(profiles_dir)
-    presets = {}
-    errors = []
-    try:
-        idx = load_json(os.path.join(profiles_dir, vendor + ".json"))
-    except (OSError, ValueError) as e:
-        return presets, [f"unreadable vendor index {vendor}.json: {e}"]
-    for entry in idx.get("filament_list", []):
-        rel = f"{vendor}/{entry.get('sub_path', '')}"
-        path = os.path.join(profiles_dir, vendor, entry.get("sub_path", ""))
-        try:
-            data = load_json(path)
-        except (OSError, ValueError) as e:
-            errors.append(f"unreadable filament profile {rel}: {e}")
-            continue
-        name = data.get("name", entry.get("name"))
-        presets[name] = {
-            "name": name,
-            "file": rel,
-            "path": path,
-            "filament_id": data.get("filament_id"),
-            "inherits": data.get("inherits"),
-            "instantiation": str(data.get("instantiation", "")).lower() == "true",
-            "compatible_printers": data.get("compatible_printers") or [],
-            "filament_vendor": data.get("filament_vendor"),
-            "filament_type": data.get("filament_type"),
-            "renamed_from": data.get("renamed_from"),
-        }
-    return presets, errors
-
-
-def resolve_filament_id(name, filaments, ofl_filaments, seen=None, in_ofl=False):
-    """Walk the inherits chain for the effective filament_id, loader-faithfully.
-
-    Mirrors PresetBundle.cpp load_vendor_configs_from_json: a hop resolves in the
-    vendor's own map first, then falls back to the OFL base-bundle map. OFL's map
-    was memoized entirely within OFL, so once a chain enters OFL it stays in OFL
-    (a vendor file sharing an OFL preset's name must not shadow OFL-internal
-    hops). Additionally, a vendor preset that never resolves an id inside the
-    vendor is re-tried against the OFL map keyed by its direct parent name.
-
-    Returns (filament_id or None, source, ofl_entry) where source is one of
-    "own"/"inherited"/"missing"/"dangling"/"cycle" and ofl_entry is the name of
-    the OFL preset through which a vendor chain entered OFL (None when the id was
-    declared vendor-side or resolution started inside OFL).
-    """
-    if seen is None:
-        seen = set()
-    if name in seen:
-        return None, "cycle", None
-    seen.add(name)
-    entry = None
-    if in_ofl:
-        rec = ofl_filaments.get(name)
-    else:
-        rec = filaments.get(name)
-        if rec is None and name in ofl_filaments:
-            rec, in_ofl, entry = ofl_filaments[name], True, name
-    if rec is None:
-        return None, "dangling", None
-    if rec.get("filament_id"):
-        return rec["filament_id"], "own" if len(seen) == 1 else "inherited", entry
-    parent = rec.get("inherits")
-    if parent:
-        fid, src, sub_entry = resolve_filament_id(parent, filaments, ofl_filaments, seen, in_ofl)
-        if fid or in_ofl:
-            return fid, src, entry if entry is not None else sub_entry
-        # Vendor chain dead-ended id-less: the loader would have consulted the
-        # OFL map at each vendor hop's inherits; retry this hop's parent in OFL.
-        if parent in ofl_filaments:
-            fid, src, _ = resolve_filament_id(parent, filaments, ofl_filaments, set(), True)
-            return fid, src, parent
-        return fid, src, sub_entry
-    return None, "missing", entry
-
-
-def resolve_filament_field(name, field, filaments, ofl_filaments, seen=None, in_ofl=False):
-    """Resolve an inheritable list option (filament_vendor / filament_type) with
-    the same hop semantics as resolve_filament_id: own value, else walk
-    `inherits` in the vendor map with OFL base-bundle fallback. Values are list
-    options — the first element counts; "" when the chain never defines one.
-    """
-    if seen is None:
-        seen = set()
-    if name in seen:
-        return ""
-    seen.add(name)
-    if in_ofl:
-        rec = ofl_filaments.get(name)
-    else:
-        rec = filaments.get(name)
-        if rec is None and name in ofl_filaments:
-            rec, in_ofl = ofl_filaments[name], True
-    if rec is None:
-        return ""
-    value = rec.get(field)
-    if isinstance(value, str):
-        value = [value]
-    if value and value[0]:
-        return value[0]
-    parent = rec.get("inherits")
-    if parent:
-        found = resolve_filament_field(parent, field, filaments, ofl_filaments, seen, in_ofl)
-        if found or in_ofl:
-            return found
-        if parent in ofl_filaments:
-            return resolve_filament_field(parent, field, filaments, ofl_filaments, set(), True)
-        return found
-    return ""
-
-
-def resolve_triple(name, filaments, ofl_filaments):
-    """The preset's mint-key triple (filament_vendor, filament_type, filament name)."""
-    return (resolve_filament_field(name, "filament_vendor", filaments, ofl_filaments),
-            resolve_filament_field(name, "filament_type", filaments, ofl_filaments),
-            base_name(name))
-
-
-def analyze_tree(profiles_dir):
-    """Load every vendor bundle and derive the full filament_id state.
-
-    Returns a dict with the tree-derived snapshot sections plus the working data
-    the checks and the assign pass need. All claims are "Vendor/Filament" strings
-    over INSTANTIATED system filaments, tree-wide including OFL and BBL.
-    """
-    profiles_dir = str(profiles_dir)
-    vendor_names = list_vendor_names(profiles_dir)
-    ofl_filaments, ofl_errors = (
-        load_vendor_filaments(profiles_dir, OFL) if OFL in vendor_names else ({}, [])
-    )
-
-    vendors = {}
-    read_errors = list(ofl_errors)
-    for vendor in vendor_names:
-        if vendor == OFL:
-            filaments = ofl_filaments
-        else:
-            filaments, errs = load_vendor_filaments(profiles_dir, vendor)
-            read_errors.extend(errs)
-        for rec in filaments.values():
-            eff, src, _entry = resolve_filament_id(rec["name"], filaments, ofl_filaments)
-            rec["eff_filament_id"] = eff
-            rec["id_source"] = src
-        vendors[vendor] = filaments
-
-    # id -> set of "Vendor/Filament" claims over instantiated presets. Every id
-    # occurring in the tree is a key; ids only ever DECLARED (e.g. on a root
-    # none of whose descendants instantiate) keep an empty claim list, so that
-    # the snapshot exactly equals the tree-derived state.
-    ids = {}
-    vendor_ids = {}             # vendor -> set of ids occurring there (declared or effective)
-    declared_ids = {}           # vendor -> set of ids DECLARED in that vendor's own files
-    missing_effective = []      # (vendor, name, file) instantiated presets resolving no id
-    inherited = []              # (vendor, rec, eff, triple) instantiated presets inheriting an OF id
-    triples = {}                # fid -> set of triples of its declarers
-    declarer_triples = []       # (vendor, rec, fid, triple) per declarer
-    filament_triples = {}       # (vendor, filament_name) -> {triple: [declarers]}
-    mints = {}                  # minted id -> triples minting it (declarers + instantiated)
-
-    for vendor, filaments in vendors.items():
-        occurring = vendor_ids.setdefault(vendor, set())
-        for rec in filaments.values():
-            triple = resolve_triple(rec["name"], filaments, ofl_filaments)
-            rec["triple"] = triple
-            if rec.get("filament_id") or rec["instantiation"]:
-                mints.setdefault(generate_filament_id(*triple), set()).add(triple)
-            if rec.get("filament_id"):
-                fid = rec["filament_id"]
-                occurring.add(fid)
-                declared_ids.setdefault(vendor, set()).add(fid)
-                ids.setdefault(fid, set())
-                declarer_triples.append((vendor, rec, fid, triple))
-                triples.setdefault(fid, set()).add(triple)
-                filament_triples.setdefault(
-                    (vendor, base_name(rec["name"])), {}).setdefault(
-                    triple, []).append(rec["name"])
-            if not rec["instantiation"]:
-                continue
-            eff = rec.get("eff_filament_id")
-            if not eff:
-                missing_effective.append((vendor, rec["name"], rec["file"]))
-                continue
-            occurring.add(eff)
-            ids.setdefault(eff, set()).add(f"{vendor}/{base_name(rec['name'])}")
-            if not rec.get("filament_id") and OF_ID_RE.match(eff):
-                inherited.append((vendor, rec, eff, triple))
-
-    # Cross-bundle triple divergence (check 5, warning only): the same filament
-    # name declared in several bundles with different triples cannot converge
-    # on one id until the divergence is fixed.
-    name_bundles = {}
-    for (vendor, filament_name), tmap in filament_triples.items():
-        name_bundles.setdefault(filament_name, {})[vendor] = frozenset(tmap)
-    cross_bundle_triples = [
-        (filament_name, {v: sorted(ts) for v, ts in per_vendor.items()})
-        for filament_name, per_vendor in sorted(name_bundles.items())
-        if len(per_vendor) > 1 and len(set(per_vendor.values())) > 1
-    ]
-
-    return {
-        "vendors": vendors,
-        "read_errors": read_errors,
-        "ids": {fid: sorted(claims) for fid, claims in ids.items()},
-        "vendor_ids": vendor_ids,
-        "declared_ids": declared_ids,
-        "missing_effective": sorted(missing_effective),
-        "inherited": inherited,
-        "triples": {fid: sorted(list(t) for t in ts) for fid, ts in triples.items()},
-        "declarer_triples": declarer_triples,
-        "filament_triples": filament_triples,
-        "cross_bundle_triples": cross_bundle_triples,
-        # id -> the products (triples) minting it, where there is more than one
-        "collisions": {fid: sorted(ts) for fid, ts in mints.items() if len(ts) > 1},
-    }
-
-
-# ---------------------------------------------------------------------------
-# Snapshot IO
-# ---------------------------------------------------------------------------
-
-def snapshot_from_analysis(analysis):
-    """One entry per id, in id order: the product triple it is minted from and
-    the "Vendor/Filament" claims on it. Requires exactly one declared triple per
-    id (update_snapshot refuses any other state; check 3 rejects it anyway)."""
-    ids = {}
-    for fid, claims in sorted(analysis["ids"].items()):
-        [(vendor, ftype, filament_name)] = analysis["triples"][fid]
-        ids[fid] = {"filaments": sorted(claims), "name": filament_name,
-                    "filament_type": ftype, "filament_vendor": vendor}
-    return {"ids": ids}
-
-
-def snapshot_triple(entry):
-    return [entry["filament_vendor"], entry["filament_type"], entry["name"]]
-
-
-def load_snapshot(path):
-    """Return the snapshot dict, or None when the file does not exist."""
-    if not os.path.exists(path):
-        return None
-    data = load_json(path)
-    data.setdefault("ids", {})
-    return data
-
-
-def write_snapshot(path, obj):
-    """Deterministic serialization: snapshot_from_analysis order, indent 1, LF,
-    trailing newline."""
-    with open(path, "w", encoding="utf-8", newline="\n") as f:
-        json.dump(obj, f, indent=1, ensure_ascii=False)
-        f.write("\n")
-
-
-# ---------------------------------------------------------------------------
-# Reserved namespaces
-# ---------------------------------------------------------------------------
-
-def reserved_space_owner(fid):
-    """(is_reserved, owner_vendor or None) for the frozen id spaces."""
-    if fid.startswith("GF"):
-        return True, None  # Bambu AMS/RFID catalog: frozen, no vendor (not even BBL) may declare it
-    if fid.startswith("QD_"):
-        return True, None  # dissolved Qidi device-protocol space: NO vendor may declare it
-    if USER_CUSTOM_ID_RE.match(fid) or fid == "null":
-        return True, None  # user-custom space: no system vendor may own it
-    return False, None
-
-
-def reserved_space_desc(fid, owner):
-    """Human description of a reserved space for error messages."""
-    if owner:
-        return f"owned by {owner}"
-    if fid.startswith("GF"):
-        return "Bambu AMS/RFID catalog; frozen, no preset may declare it"
-    if fid.startswith("QD_"):
-        return "Qidi device protocol; composed by the device, never a preset id"
-    return "reserved for user-custom presets"
-
-
-# ---------------------------------------------------------------------------
-# Checks (imported and called tree-wide by orca_extra_profile_check.py)
-# ---------------------------------------------------------------------------
-
-def check_filament_ids(profiles_dir=PROFILES_DIR, snapshot_path=SNAPSHOT_PATH,
-                       map_path=BAMBU_MAP_PATH):
-    """Validate filament_id state across every vendor. Returns the error count.
-
-    1. Format: every id occurring in the tree (declared or effective) must
-       match ^OF[0-9A-Za-z]{6}$. No exceptions: not the snapshot, not BBL.
-    2. Snapshot equality, both directions: every id in the tree, the filaments
-       claiming it and the triple its declarers resolve must equal the snapshot
-       entry exactly (the snapshot diff is the maintainer gate).
-    3. Identity: the id is a function of the triple alone, and there is no
-       second acceptable value. (a) A declared id must equal the one id the
-       declarer's own triple mints; (b) the id an instantiated preset inherits
-       must equal the one ITS own triple mints — how it inherits it (a root, a
-       real filament, an OFL preset) is irrelevant; (c) every instantiated
-       filament resolves an effective id at all (an id-less one is a hard load
-       error in C++); (d) no two products mint one id (a base62 collision,
-       resolved by renaming one of them).
-    4. Reserved namespaces (GF*/QD_*/P-hex/"null", all ownerless) must not be
-       claimed by any vendor.
-    5. Triple integrity: (a) every declarer resolves non-empty filament_vendor
-       and filament_type; (b) declarers of one (bundle, filament) resolve
-       identical triples; cross-bundle divergence on the same filament name is a
-       warning only.
-    6. Bambu catalog map: resources/printers/bambu_filament_ids.json must parse,
-       carry source/bambustudio_commit/generated, key only OF-format ids, map
-       each Bambu id at most once, and for every row whose key the tree claims,
-       the tree's triple for that id must equal the row's (vendor, type, name).
-
-    Nothing is grandfathered: the snapshot sanctions state, never exceptions.
-    """
-    _utf8_console()
-    errors = 0
-    analysis = analyze_tree(profiles_dir)
-    snapshot = load_snapshot(snapshot_path)
-    if snapshot is None:
-        print_error(f"filament_id snapshot not found at {snapshot_path}; {UPDATE_HINT}")
-        return 1
-    for msg in analysis["read_errors"]:
-        print_error(msg)
-        errors += 1
-
-    snap_ids = snapshot["ids"]
-    tree_ids = analysis["ids"]
-
-    # -- 1. format ----------------------------------------------------------
-    for vendor in sorted(analysis["vendor_ids"]):
-        for fid in sorted(analysis["vendor_ids"][vendor]):
-            if OF_ID_RE.match(fid):
-                continue
-            print_error(
-                f'filament_id "{fid}" ({vendor}) is not a minted "OF" id; new '
-                f'filament ids must come from "{GENERATE_CMD}"')
-            errors += 1
-
-    # -- 2. snapshot equality (both directions) -----------------------------
-    tree_triples = analysis["triples"]
-    for fid in sorted(tree_ids):
-        entry = snap_ids.get(fid)
-        if entry is None:
-            print_error(
-                f'filament_id "{fid}" is not sanctioned by '
-                f"scripts/filament_id_snapshot.json; {UPDATE_HINT}")
-            errors += 1
-            continue
-        for claim in tree_ids[fid]:
-            if claim not in entry["filaments"]:
-                print_error(
-                    f'filament_id "{fid}" claim "{claim}" is not sanctioned by '
-                    f"scripts/filament_id_snapshot.json; {UPDATE_HINT}")
-                errors += 1
-        # Every tree id has at least one declarer; the snapshot records one
-        # triple per id, so a divergent declarer is a mismatch in both directions.
-        sanctioned = snapshot_triple(entry)
-        for t in tree_triples[fid]:
-            if t != sanctioned:
-                print_error(
-                    f'filament_id "{fid}" triple "{"/".join(t)}" is not sanctioned by '
-                    f'scripts/filament_id_snapshot.json, which records '
-                    f'"{"/".join(sanctioned)}"; {UPDATE_HINT}')
-                errors += 1
-    for fid in sorted(snap_ids):
-        if fid not in tree_ids:
-            print_error(
-                f'filament_id stability: snapshot id "{fid}" vanished from the tree; '
-                f"{UPDATE_HINT}")
-            errors += 1
-            continue
-        for claim in snap_ids[fid]["filaments"]:
-            if claim not in tree_ids[fid]:
-                print_error(
-                    f'filament_id stability: snapshot claim "{claim}" of id "{fid}" '
-                    f"vanished from the tree; {UPDATE_HINT}")
-                errors += 1
-
-    # -- 3. identity: the id is a function of the triple alone ---------------
-    # One triple, one id: a declaration must carry exactly the mint of its
-    # triple, and there is no second acceptable value — not a salt, not a
-    # hand-picked one, not whatever another preset of the product carries. Two
-    # presets of one product that would be AMS-ambiguous on a printer are fixed
-    # in the profiles, by making their compatible_printers disjoint or by
-    # retiring the redundant one.
-    for vendor, rec, fid, triple in sorted(
-            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
-        want = generate_filament_id(*triple)
-        if not OF_ID_RE.match(fid) or fid == want:
-            continue  # a non-OF id is check 1's error
-        print_error(
-            f'filament_id "{fid}" declared by "{rec["name"]}" ({rec["file"]}) does '
-            f'not match the mint of its triple "{"/".join(triple)}": expected '
-            f'"{want}"; paste the expected id, or fix the triple and run '
-            f'"{GENERATE_CMD} --vendor {vendor}" (preview with --dry-run), then '
-            f"--update-snapshot")
-        errors += 1
-    # (3b) An inherited id is held to the same single value, and every preset
-    # missing it is listed — a variant under a wrong root as much as a preset
-    # riding another product's root. Nothing is folded into the declarer's
-    # error: the report names each preset whose id is wrong.
-    for vendor, rec, eff, triple in sorted(
-            analysis["inherited"], key=lambda x: (x[0], x[1]["file"])):
-        want = generate_filament_id(*triple)
-        if eff == want:
-            continue
-        print_error(
-            f'preset "{rec["name"]}" ({rec["file"]}) inherits filament_id "{eff}" but '
-            f'its own triple "{"/".join(triple)}" mints "{want}"; '
-            f"a preset carries the id of its own product: inherit a preset of the "
-            f"same filament, or declare its own key")
-        errors += 1
-    ofl_map = analysis["vendors"].get(OFL, {})
-    for vendor, name, file in analysis["missing_effective"]:
-        triple = resolve_triple(name, analysis["vendors"][vendor], ofl_map)
-        expected = generate_filament_id(*triple)
-        print_error(
-            f'instantiated filament "{name}" ({file}) resolves no filament_id anywhere '
-            f"in its inherits chain — this is a hard load error in the C++ loader; "
-            f'run "{GENERATE_CMD}" (expected id for filament '
-            f'"{vendor}/{base_name(name)}": "{expected}")')
-        errors += 1
-    # (3d) The mint is injective over the tree's products, or two of them are
-    # indistinguishable to every device that matches on the id.
-    for fid, ts in sorted(analysis["collisions"].items()):
-        print_error(
-            f'filament_id "{fid}" is the mint of {len(ts)} different products '
-            f'({"; ".join("/".join(t) for t in ts)}): a base62 collision; rename one '
-            f"of them so their triples differ")
-        errors += 1
-
-    # -- 4. reserved namespaces ----------------------------------------------
-    for fid in sorted(tree_ids):
-        is_reserved, owner = reserved_space_owner(fid)
-        if not is_reserved:
-            continue
-        for claim in tree_ids[fid]:
-            vendor = claim.split("/", 1)[0]
-            if vendor == owner:
-                continue
-            space = reserved_space_desc(fid, owner)
-            print_error(
-                f'filament_id "{fid}" of "{claim}" is in a reserved id space '
-                f"({space}) and must not be claimed by system presets of other vendors")
-            errors += 1
-
-    # -- 5. triple integrity ---------------------------------------------------
-    for vendor, rec, fid, triple in sorted(
-            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
-        if triple[0] and triple[1]:
-            continue
-        missing = " and ".join(
-            k for k, v in (("filament_vendor", triple[0]),
-                           ("filament_type", triple[1])) if not v)
-        print_error(
-            f'preset "{rec["name"]}" ({rec["file"]}) declares filament_id "{fid}" but '
-            f"resolves empty {missing}; the mint key needs both (generic materials "
-            f'use filament_vendor "Generic")')
-        errors += 1
-    for (vendor, filament_name), tmap in sorted(analysis["filament_triples"].items()):
-        if len(tmap) < 2:
-            continue
-        detail = "; ".join(
-            f'"{"/".join(t)}" ({", ".join(sorted(names))})'
-            for t, names in sorted(tmap.items()))
-        print_error(
-            f'filament "{vendor}/{filament_name}" declarers resolve divergent triples: '
-            f"{detail}; declarers of one filament must agree on "
-            f"(filament_vendor, filament_type)")
-        errors += 1
-    for filament_name, per_vendor in analysis["cross_bundle_triples"]:
-        detail = "; ".join(
-            f'{v}: {", ".join("/".join(t) for t in ts)}'
-            for v, ts in sorted(per_vendor.items()))
-        print_warning(
-            f'filament name "{filament_name}" resolves different triples across bundles '
-            f"({detail}); bundles of one product converge on one id only once "
-            f"their triples agree")
-
-    # -- 6. Bambu catalog map --------------------------------------------------
-    try:
-        bambu_map = load_json(map_path)
-        if not isinstance(bambu_map, dict):
-            raise ValueError("top level is not a JSON object")
-    except (OSError, ValueError) as e:
-        print_error(f"Bambu catalog map {map_path} does not parse ({e}); {BAMBU_MAP_HINT}")
-        errors += 1
-    else:
-        for key in ("source", "bambustudio_commit", "generated"):
-            if not bambu_map.get(key):
-                print_error(f'Bambu catalog map {map_path} is missing "{key}"; {BAMBU_MAP_HINT}')
-                errors += 1
-        rows = bambu_map.get("filaments")
-        # An empty or absent section is not a well-formed map: it makes every runtime
-        # translation silently degrade to identity (BBLPrinterAgent logs nothing for it),
-        # and it is what a regeneration against the wrong --bambustudio-dir writes.
-        if not isinstance(rows, dict) or not rows:
-            print_error(f'Bambu catalog map {map_path} declares no "filaments" rows; '
-                        f"{BAMBU_MAP_HINT}")
-            errors += 1
-            rows = {}
-        bambu_id_owners = {}
-        for fid, row in sorted(rows.items()):
-            if not OF_ID_RE.match(fid):
-                print_error(f'Bambu catalog map key "{fid}" is not a minted "OF" id; '
-                           f"{BAMBU_MAP_HINT}")
-                errors += 1
-            bambu_id = row.get("bambu_id")
-            if not bambu_id:
-                # An empty id would map the empty string to a real filament at runtime.
-                print_error(f'Bambu catalog map row "{fid}" declares no "bambu_id"; '
-                            f"{BAMBU_MAP_HINT}")
-                errors += 1
-            elif bambu_id in bambu_id_owners:
-                print_error(
-                    f'Bambu catalog map: Bambu id "{bambu_id}" is mapped by both '
-                    f'"{bambu_id_owners[bambu_id]}" and "{fid}"; {BAMBU_MAP_HINT}')
-                errors += 1
-            else:
-                bambu_id_owners[bambu_id] = fid
-            claimed = tree_triples.get(fid)
-            if not claimed:
-                continue  # a product BambuStudio ships that the tree does not (yet)
-            row_triple = [row.get("vendor", ""), row.get("type", ""), row.get("name", "")]
-            if row_triple not in claimed:
-                print_error(
-                    f'Bambu catalog map row "{fid}" claims triple "{"/".join(row_triple)}" '
-                    f'but the tree declares "{"; ".join("/".join(t) for t in claimed)}" for '
-                    f"that id; {BAMBU_MAP_HINT}")
-                errors += 1
-
-    return errors
-
-
-# ---------------------------------------------------------------------------
-# --update-snapshot
-# ---------------------------------------------------------------------------
-
-def update_snapshot(profiles_dir=PROFILES_DIR, snapshot_path=SNAPSHOT_PATH, dry_run=False):
-    """Regenerate the snapshot from the tree.
-
-    Refuses to sanction a tree it could not read whole, a reserved-namespace id
-    (or a claim on one) and an id declared under more than one triple: none of
-    them can ever pass --check, so writing them into the snapshot would only
-    hide the mistake until CI.
-    Idempotent: a second run over an unchanged tree changes nothing. Returns 0
-    on success.
-    """
-    analysis = analyze_tree(profiles_dir)
-    # A tree that could not be read whole cannot be sanctioned: the snapshot
-    # would silently drop the unreadable bundle's ids and claims, and the diff
-    # would read as a deliberate removal.
-    refusals = len(analysis["read_errors"])
-    for msg in analysis["read_errors"]:
-        print_error(msg)
-
-    for vendor in sorted(analysis["vendor_ids"]):
-        for fid in sorted(analysis["vendor_ids"][vendor]):
-            is_reserved, owner = reserved_space_owner(fid)
-            if is_reserved and vendor != owner:
-                print_error(
-                    f'refusing to sanction filament_id "{fid}" ({vendor}): reserved id '
-                    f"space, {reserved_space_desc(fid, owner)}")
-                refusals += 1
-    for fid, ts in sorted(analysis["triples"].items()):
-        if len(ts) > 1:
-            print_error(
-                f'refusing to sanction filament_id "{fid}": declared under {len(ts)} '
-                f'triples ({"; ".join("/".join(t) for t in ts)}); one id names one '
-                f"product (check 3)")
-            refusals += 1
-    if refusals:
-        return 1
-
-    new_snap = snapshot_from_analysis(analysis)
-    old_snap = load_snapshot(snapshot_path)
-    old_ids = old_snap["ids"] if old_snap else {}
-
-    # Diff summary.
-    added_ids = sorted(set(new_snap["ids"]) - set(old_ids))
-    removed_ids = sorted(set(old_ids) - set(new_snap["ids"]))
-    added_claims = sum(
-        len(set(entry["filaments"]) - set(old_ids.get(fid, {}).get("filaments", [])))
-        for fid, entry in new_snap["ids"].items())
-    removed_claims = sum(
-        len(set(entry["filaments"]) - set(new_snap["ids"].get(fid, {}).get("filaments", [])))
-        for fid, entry in old_ids.items())
-    changed = new_snap != (old_snap or {"ids": {}})
-
-    if changed and not dry_run:
-        write_snapshot(snapshot_path, new_snap)
-
-    print_info(f"snapshot ids      : {len(new_snap['ids'])} (+{len(added_ids)} / -{len(removed_ids)})")
-    print_info(f"claims added      : {added_claims}")
-    print_info(f"claims removed    : {removed_claims}")
-    if changed and dry_run:
-        print_success(f"dry run: {snapshot_path} would be rewritten; nothing written")
-    elif changed:
-        print_success(f"snapshot written to {snapshot_path}")
-    else:
-        print_success("snapshot already up to date; nothing changed")
-    return 0
-
-
-# ---------------------------------------------------------------------------
-# Byte-preserving profile edits
-# ---------------------------------------------------------------------------
-# Binary IO throughout: a profile keeps its original line endings (LF or CRLF),
-# its BOM and its exact formatting apart from the one line being touched.
-
-def insert_key_line(text, key, value, before=(), after=()):
-    """Insert a `"key": value` line into a preset that lacks one.
-
-    Placed just before the first `before` anchor the file has (matching the
-    canonical key order), else just after the first `after` anchor, reusing that
-    anchor line's indentation and line ending. Returns (text, insertions made).
-    """
-    def line(m):
-        return (f'{m.group(1)}"{key}": {json.dumps(value, ensure_ascii=False)},'
-                f'{m.group(2)}')
-
-    for anchors, at_start in ((before, True), (after, False)):
-        for anchor in anchors:
-            m = re.search(r'^([ \t]*)"' + re.escape(anchor) + r'"[ \t]*:.*?(\r?\n)',
-                          text, re.MULTILINE)
-            if m:
-                cut = m.start() if at_start else m.end()
-                return text[:cut] + line(m) + text[cut:], 1
-    return text, 0
-
-
-def replace_key_value(text, key, new_value, old_value=None):
-    """Swap the JSON string VALUE on the `"key"` line, byte-preserving the rest.
-
-    When old_value is given the line must carry exactly that value, so a stale
-    rewrite fails loudly instead of clobbering an unexpected id.
-    Returns (text, replacements made).
-    """
-    value = (re.escape(json.dumps(old_value, ensure_ascii=False))
-             if old_value is not None else _JSON_STR)
-    pattern = re.compile(
-        r'(^[ \t]*"' + re.escape(key) + r'"[ \t]*:[ \t]*)' + value, re.MULTILINE)
-    return pattern.subn(
-        lambda m: m.group(1) + json.dumps(new_value, ensure_ascii=False), text, count=1)
-
-
-def delete_key_line(text, key, old_value=None):
-    """Delete the `"key"` line, byte-preserving the rest.
-
-    Handles both the canonical layout (trailing comma) and a last-property
-    layout (comma on the preceding line, consumed so no dangling comma is left).
-    Returns (text, deletions made).
-    """
-    value = (re.escape(json.dumps(old_value, ensure_ascii=False))
-             if old_value is not None else _JSON_STR)
-    member = r'"' + re.escape(key) + r'"[ \t]*:[ \t]*' + value
-    m = re.search(r'^[ \t]*' + member + r'[ \t]*,[ \t]*\r?\n', text, re.MULTILINE)
-    if m:
-        return text[:m.start()] + text[m.end():], 1
-    m = re.search(r',[ \t]*\r?\n[ \t]*' + member + r'[ \t]*(?=\r?\n)', text)
-    if m:
-        return text[:m.start()] + text[m.end():], 1
-    return text, 0
-
-
-def insert_filament_id(text, new_id):
-    """Insert a `"filament_id"` line before `instantiation`, else after `name`."""
-    return insert_key_line(text, "filament_id", new_id,
-                           before=("instantiation",), after=("name",))
-
-
-def replace_filament_id_value(text, old_id, new_id):
-    """Swap the value on the `"filament_id"` line; it must carry old_id."""
-    return replace_key_value(text, "filament_id", new_id, old_value=old_id)
-
-
-def insert_setting_id(text, new_id):
-    """Insert a `"setting_id"` line before `filament_id`, else `instantiation`.
-
-    Falls back to `name` — the one key every preset has — so the anchor does not
-    depend on whether filament_id has been written yet: a dry run, which does not
-    write it, must reach the same verdict as the real run that does.
-    """
-    return insert_key_line(text, "setting_id", new_id,
-                           before=("filament_id", "instantiation"), after=("name",))
-
-
-def _edit_profile(path, edit, dry_run=False, what="edit"):
-    """Apply `edit(text) -> (text, n)` to the profile at path, byte-preserving.
-
-    The result is re-parsed and returned so the caller can verify the outcome —
-    in a dry run too, where only the write itself is skipped. Raises when the
-    edit found no anchor or produced invalid JSON.
-    """
-    with open(path, "rb") as f:
-        raw = f.read()
-    bom = raw.startswith(b"\xef\xbb\xbf")
-    text = raw.decode("utf-8-sig")
-    text, n = edit(text)
-    if n == 0:
-        raise RuntimeError(f"could not apply {what} to {path}")
-    try:
-        data = json.loads(text)  # fail loudly if the edit broke the JSON
-    except ValueError as e:
-        raise RuntimeError(f"{what} broke the JSON in {path}: {e}") from None
-    if not dry_run:
-        with open(path, "wb") as f:
-            f.write((b"\xef\xbb\xbf" if bom else b"") + text.encode("utf-8"))
-    return data
-
-
-def write_filament_id(path, new_id, dry_run=False):
-    """Insert new_id into the profile at path, byte-preserving everything else."""
-    _edit_profile(path, lambda text: insert_filament_id(text, new_id),
-                  dry_run, "filament_id insert")
-
-
-def rewrite_filament_id(path, old_id, new_id, dry_run=False):
-    """Replace the filament_id value old_id -> new_id; re-parses to verify."""
-    data = _edit_profile(path, lambda text: replace_filament_id_value(text, old_id, new_id),
-                         dry_run, "filament_id rewrite")
-    if data.get("filament_id") != new_id:
-        raise RuntimeError(f'rewrite of filament_id "{old_id}" -> "{new_id}" in {path} '
-                           f"did not take effect")
-
-
-# ---------------------------------------------------------------------------
-# --generate
-# ---------------------------------------------------------------------------
-
-def _incomplete_triple(triple):
-    """The name(s) of the empty mint-key fields, or "" when both are present."""
-    return " and ".join(k for k, v in (("filament_vendor", triple[0]),
-                                       ("filament_type", triple[1])) if not v)
-
-
-def generate_filament_ids(profiles_dir=PROFILES_DIR, vendors=None, dry_run=False,
-                          changed_paths=None):
-    """Make every filament carry the id its own triple mints.
-
-    One rule, applied to declarations and to id-less filaments alike:
-      * a declared id that is not the one its own triple mints — a wrong OF id,
-        or a foreign one such as a Bambu "GF*" arriving with an upstream sync —
-        is replaced in place;
-      * an instantiated filament that resolves no id at all gets one inserted
-        into its root(s): the id-less presets of the SAME filament its members
-        inherit, or the member itself (a parent of another filament cannot carry
-        this filament's id — check 3).
-    A declaration is left alone exactly when it already equals the one id its
-    triple mints (check 3). Two products minting one id (check 3d) are reported
-    and left unwritten: nothing salts past a collision, a rename resolves it.
-
-    `vendors` restricts what is WRITTEN; the id is a function of the triple
-    alone, so a narrowed run writes exactly what a full one would, and --check
-    reports whatever it was not allowed to touch. `changed_paths`, when a set is
-    passed, collects the files that changed. A file whose layout offers no
-    anchor for the edit is reported and counted as an error, so one odd profile
-    cannot abort the pass over all the others. Never reads or touches the
-    snapshot — run --update-snapshot afterwards and review the diff. Returns
-    (files_changed, errors).
-    """
-    _utf8_console()
-    analysis = analyze_tree(profiles_dir)
-    errors = 0
-    for msg in analysis["read_errors"]:
-        print_error(msg)
-        errors += 1
-    wanted = None
-    if vendors is not None:
-        wanted = set(vendors)
-        # A vendor directory without a bundle index simply has no filaments to
-        # process; only a name that is no directory at all is an error.
-        unknown = sorted(wanted - set(list_profile_dirs(profiles_dir)))
-        if unknown:
-            for v in unknown:
-                print_error(f'unknown vendor "{v}" in {profiles_dir}')
-            return 0, errors + len(unknown)
-
-    colliding = set()  # triples no run may write an id for
-    for fid, ts in sorted(analysis["collisions"].items()):
-        print_error(
-            f'cannot write filament_id "{fid}": it is the mint of {len(ts)} different '
-            f'products ({"; ".join("/".join(t) for t in ts)}), a base62 collision; '
-            f"rename one of them so their triples differ")
-        errors += 1
-        colliding.update(ts)
-
-    verb = "would " if dry_run else ""
-    files_changed = 0
-    reminted = 0
-    inserted = 0
-
-    # 1. Declarations that are not the mint of their own triple.
-    for vendor, rec, fid, triple in sorted(
-            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
-        want = generate_filament_id(*triple)
-        if (fid == want or (wanted is not None and vendor not in wanted)
-                or triple in colliding):
-            continue
-        missing = _incomplete_triple(triple)
-        if missing:
-            print_error(
-                f'cannot re-mint "{rec["file"]}" (filament_id "{fid}"): resolves empty '
-                f'{missing}; the mint key needs both (generic materials use '
-                f'filament_vendor "Generic")')
-            errors += 1
-            continue
-        try:
-            rewrite_filament_id(rec["path"], fid, want, dry_run)
-        except (OSError, RuntimeError, ValueError) as e:
-            print_error(str(e))
-            errors += 1
-            continue
-        files_changed += 1
-        reminted += 1
-        if changed_paths is not None:
-            # Index sub_paths are "/"-joined even on Windows, where the
-            # setting_id pass reaches the same file through os.walk: normalize
-            # or one file touched by both passes counts as two.
-            changed_paths.add(os.path.normpath(rec["path"]))
-        print_info(f'{verb}rewrite {rec["file"]}: "{fid}" -> "{want}" '
-                   f'(triple "{"/".join(triple)}")')
-
-    # 2. Instantiated filaments that resolve no id at all, grouped by filament.
-    filaments = {}  # (vendor, filament name) -> [rec]
-    for vendor, name, _file in analysis["missing_effective"]:
-        if wanted is not None and vendor not in wanted:
-            continue
-        rec = analysis["vendors"][vendor][name]
-        if rec["id_source"] in ("cycle", "dangling"):
-            print_error(f'cannot mint for "{vendor}/{name}": broken inherits chain '
-                        f'({rec["id_source"]})')
-            errors += 1
-            continue
-        filaments.setdefault((vendor, base_name(name)), []).append(rec)
-
-    ofl_map = analysis["vendors"].get(OFL, {})
-    for (vendor, filament_name), members in sorted(filaments.items()):
-        vendor_map = analysis["vendors"][vendor]
-        # Root preset(s): the direct vendor-side parents of the members (id-less
-        # by construction) that belong to the same filament, or the member itself.
-        roots = {}
-        for rec in members:
-            parent = rec.get("inherits")
-            root = vendor_map.get(parent) if parent else None
-            if (root is None or root.get("filament_id")
-                    or base_name(root["name"]) != filament_name):
-                root = rec  # root-less member carries the id itself
-            roots[root["name"]] = root
-        fields = {(resolve_filament_field(n, "filament_vendor", vendor_map, ofl_map),
-                   resolve_filament_field(n, "filament_type", vendor_map, ofl_map))
-                  for n in roots}
-        if len(fields) > 1:
-            print_error(
-                f'cannot mint for filament "{vendor}/{filament_name}": its roots resolve '
-                f"divergent (filament_vendor, filament_type) pairs {sorted(fields)}; "
-                f"align the fields first")
-            errors += 1
-            continue
-        triple = (*next(iter(fields)), filament_name)
-        if triple in colliding:
-            continue  # reported above
-        missing = _incomplete_triple(triple)
-        if missing:
-            print_error(
-                f'cannot mint for filament "{vendor}/{filament_name}": it resolves empty '
-                f'{missing}; the mint key needs both (generic materials use '
-                f'filament_vendor "Generic")')
-            errors += 1
-            continue
-        new_id = generate_filament_id(*triple)
-        for name in sorted(roots):
-            root = roots[name]
-            try:
-                write_filament_id(root["path"], new_id, dry_run)
-            except (OSError, RuntimeError, ValueError) as e:
-                print_error(str(e))
-                errors += 1
-                continue
-            files_changed += 1
-            inserted += 1
-            if changed_paths is not None:
-                changed_paths.add(os.path.normpath(root["path"]))
-            print_info(f'{verb}insert filament "{vendor}/{filament_name}": filament_id '
-                       f'"{new_id}" -> {root["file"]}')
-
-    print_info(f"filament_ids inserted  : {inserted}")
-    print_info(f"filament_ids re-minted : {reminted}")
-    return files_changed, errors
-
-
-def generate_setting_ids(profiles_dir=PROFILES_DIR, vendors=None, dry_run=False,
-                         changed_paths=None):
-    """Make every preset carry the setting_id its identity mints.
-
-    One walk over filament/, process/ and machine/ of every vendor bundle, and
-    one composite edit per file: drop the misspelled "settings_id" key (the app
-    never reads it), strip setting_id from base profiles (only instantiated
-    presets carry one), and set generate_preset_setting_id(vendor, type, name) on
-    instantiated presets — except BBL's, which keep their authoritative "G*"
-    cloud ids. `changed_paths`, when a set is passed, collects the files that
-    changed. Returns (files_changed, errors).
-    """
-    _utf8_console()
-    profiles_dir = str(profiles_dir)
-    errors = 0
-    names = list_profile_dirs(profiles_dir)
-    if vendors is not None:
-        wanted = set(vendors)
-        unknown = sorted(wanted - set(names))
-        if unknown:
-            for v in unknown:
-                print_error(f'unknown vendor "{v}" in {profiles_dir}')
-            return 0, len(unknown)
-        names = [v for v in names if v in wanted]
-        for v in sorted(wanted & RESERVED_VENDORS):
-            print_info(f'{v} keeps its authoritative "G*" setting_ids; only its base '
-                       f"declarations are stripped")
-
-    verb = "would " if dry_run else ""
-    files_changed = 0
-    counts = {"typos": 0, "stripped": 0, "assigned": 0}
-    for vendor in names:
-        for path, type_name in iter_profile_files(os.path.join(profiles_dir, vendor)):
-            try:
-                with open(path, "rb") as f:
-                    data = json.loads(f.read().decode("utf-8-sig"))
-                if not isinstance(data, dict):
-                    raise ValueError("top level is not a JSON object")
-            except (OSError, ValueError) as e:
-                print_error(f"unreadable profile {path}: {e}")
-                errors += 1
-                continue
-
-            sid = data.get("setting_id")
-            # Strictly "true", exactly as orca_extra_profile_check.py tests it:
-            # a preset the validator calls a base profile must not be given an id
-            # here, or the two would fight over it forever.
-            instantiated = data.get("instantiation") == "true"
-            edits = []  # (counter key, description, edit function)
-            if "settings_id" in data:
-                edits.append(("typos", 'drop the misspelled "settings_id"',
-                              lambda text: delete_key_line(text, "settings_id")))
-                typo = data["settings_id"]
-                if (vendor in RESERVED_VENDORS and instantiated and sid is None
-                        and isinstance(typo, str) and typo):
-                    # A reserved vendor's ids are authoritative, so there is no
-                    # formula to fall back on: correct the key and keep the
-                    # value, or the drop would leave an instantiated preset with
-                    # no setting_id and nothing able to give it one.
-                    edits.append(("assigned", 'restore its value as "setting_id"',
-                                  lambda text, new=typo: insert_setting_id(text, new)))
-            if not instantiated:
-                if sid is not None:
-                    edits.append(("stripped", "strip the base profile's setting_id",
-                                  lambda text, old=sid: delete_key_line(
-                                      text, "setting_id", old)))
-            elif vendor not in RESERVED_VENDORS:
-                name = data.get("name")
-                if not name:
-                    # Report and carry on: an edit already queued for this file
-                    # (a misspelled key) is still worth applying.
-                    print_error(f'instantiated preset has no "name": {path}')
-                    errors += 1
-                else:
-                    new_id = generate_preset_setting_id(vendor, type_name, name)
-                    if sid is None:
-                        edits.append(("assigned", "insert the setting_id",
-                                      lambda text, new=new_id: insert_setting_id(text, new)))
-                    elif sid != new_id:
-                        edits.append(("assigned", "replace the setting_id",
-                                      lambda text, new=new_id, old=sid: replace_key_value(
-                                          text, "setting_id", new, old)))
-            if not edits:
-                continue
-
-            def apply(text, _edits=edits, _path=path):
-                for _key, what, edit in _edits:
-                    text, n = edit(text)
-                    if n == 0:
-                        raise RuntimeError(f"could not {what} in {_path}")
-                return text, len(_edits)
-
-            try:
-                _edit_profile(path, apply, dry_run)
-            except (OSError, RuntimeError, ValueError) as e:
-                print_error(str(e))
-                errors += 1
-                continue
-            files_changed += 1
-            if changed_paths is not None:
-                changed_paths.add(os.path.normpath(path))
-            for key, _what, _edit in edits:
-                counts[key] += 1
-            rel = os.path.relpath(path, profiles_dir).replace(os.sep, "/")
-            print_info(f"{verb}update {rel}: "
-                       f"{', '.join(what for _key, what, _edit in edits)}")
-
-    print_info(f'misspelled "settings_id" dropped : {counts["typos"]}')
-    print_info(f'base setting_ids stripped        : {counts["stripped"]}')
-    print_info(f'setting_ids assigned             : {counts["assigned"]}')
-    return files_changed, errors
-
-
-# ---------------------------------------------------------------------------
-# CLI
-# ---------------------------------------------------------------------------
-
-EXAMPLES = """\
-examples:
-  orca_id_tool.py --generate
-      give every profile the id its identity mints, in every vendor bundle
-  orca_id_tool.py --dry-run
-      preview exactly that; writes nothing
-  orca_id_tool.py --generate --setting-id
-      setting_id only (filament, process and machine presets)
-  orca_id_tool.py --generate --filament-id --vendor Creality --vendor Elegoo
-      filament_id only, and only in those two bundles
-  orca_id_tool.py --check
-      validate filament_id state against the snapshot (the filament_id half
-      of scripts/orca_extra_profile_check.py, which is what CI runs)
-  orca_id_tool.py --update-snapshot
-      re-record the sanctioned filament_id state after a --generate run
-
-a maintenance round:
-  --dry-run  ->  --generate  ->  --update-snapshot  ->  --check  ->  commit the diff
-"""
-
-
-def build_parser():
-    parser = argparse.ArgumentParser(
-        prog="orca_id_tool.py", allow_abbrev=False,
-        formatter_class=argparse.RawDescriptionHelpFormatter,
-        description="Assign and validate the deterministic ids of OrcaSlicer system\n"
-                    "profiles: the per-product filament_id and the per-preset setting_id.\n"
-                    "\n"
-                    "Both are pure functions of the profile's own identity, so this tool\n"
-                    "never invents an id: it writes the one the rules already imply, and\n"
-                    "leaves a conforming tree alone.",
-        epilog=EXAMPLES)
-    modes = parser.add_argument_group("modes (pick one; no mode prints this help)")
-    modes.add_argument("--generate", action="store_true",
-                       help="write the id every profile should carry: filament_id from "
-                            "each filament's (filament_vendor, filament_type, name) "
-                            "triple, setting_id from each preset's (vendor, type, name). "
-                            "Idempotent and byte-preserving")
-    modes.add_argument("--check", action="store_true",
-                       help="validate filament_id state against "
-                            "scripts/filament_id_snapshot.json; exit nonzero on errors")
-    modes.add_argument("--update-snapshot", action="store_true",
-                       help="re-record the sanctioned filament_id state in "
-                            "scripts/filament_id_snapshot.json; commit the diff for "
-                            "maintainer review")
-    narrow = parser.add_argument_group("narrowing --generate")
-    narrow.add_argument("--filament-id", action="store_true",
-                        help="write filament_id only, skipping setting_id")
-    narrow.add_argument("--setting-id", action="store_true",
-                        help="write setting_id only, skipping filament_id")
-    narrow.add_argument("--vendor", metavar="VENDOR", action="append", default=[],
-                        help="write only in this vendor bundle; repeatable. The id is a "
-                             "function of the triple alone, so a narrowed run writes "
-                             "exactly what a full one would; --check reports whatever "
-                             "it left outside")
-    parser.add_argument("--dry-run", "--dryrun", dest="dry_run", action="store_true",
-                        help="report what would change and write nothing; with no mode of "
-                             "its own it previews --generate")
-    parser.add_argument("--profiles", default=PROFILES_DIR,
-                        help="profiles directory (default: resources/profiles)")
-    parser.add_argument("--snapshot", default=None, metavar="PATH",
-                        help="the sanctioned filament_id state of that tree (default: "
-                             "scripts/filament_id_snapshot.json, which describes "
-                             "resources/profiles and no other tree)")
-    return parser
-
-
-def main(argv=None):
-    _utf8_console()
-    argv = sys.argv[1:] if argv is None else list(argv)
-    parser = build_parser()
-    if not argv:
-        parser.print_help()
-        return 0
-    args = parser.parse_args(argv)
-
-    modes = [flag for flag, on in (("--generate", args.generate),
-                                   ("--check", args.check),
-                                   ("--update-snapshot", args.update_snapshot)) if on]
-    if len(modes) > 1:
-        parser.error(f"{' and '.join(modes)} cannot be combined; pick one mode")
-    if args.filament_id and args.setting_id:
-        parser.error("--filament-id and --setting-id each exclude the other; "
-                     "pass neither to write both")
-    narrowing = [flag for flag, on in (("--filament-id", args.filament_id),
-                                       ("--setting-id", args.setting_id),
-                                       ("--vendor", bool(args.vendor))) if on]
-    if not modes:
-        if args.dry_run:
-            mode = "--generate"  # --dry-run previews the writing mode
-        elif narrowing:
-            parser.error(f"{', '.join(narrowing)} narrows --generate; "
-                         f"add --generate (or --dry-run to preview it)")
-        else:
-            parser.print_help()
-            return 0
-    else:
-        mode = modes[0]
-        if narrowing and mode != "--generate":
-            parser.error(f"{', '.join(narrowing)} applies to --generate, not {mode}")
-
-    snapshot_path = args.snapshot or SNAPSHOT_PATH
-    if (args.snapshot is None and mode in ("--check", "--update-snapshot")
-            and os.path.abspath(args.profiles) != os.path.abspath(PROFILES_DIR)):
-        # The repo snapshot is the sanctioned state of resources/profiles alone:
-        # checking another tree against it is meaningless, and re-recording one
-        # into it would overwrite the tracked file with a foreign tree's state.
-        parser.error(f"{mode} reads and writes the sanctioned state of the tree it is "
-                     f"given, so --profiles needs --snapshot PATH for that tree too")
-
-    if mode == "--check":
-        errors = check_filament_ids(args.profiles, snapshot_path)
-        if errors:
-            print_error(f"filament_id check: {errors} error(s)")
-            return 1
-        print_success("filament_id check: no errors")
-        return 0
-
-    if mode == "--update-snapshot":
-        return update_snapshot(args.profiles, snapshot_path, dry_run=args.dry_run)
-
-    vendors = sorted(set(args.vendor)) or None
-    if vendors:
-        unknown = sorted(set(vendors) - set(list_profile_dirs(args.profiles)))
-        if unknown:
-            for v in unknown:
-                print_error(f'unknown vendor "{v}" in {args.profiles}')
-            return 1
-
-    # Both by default. filament_id runs first so its keys are in place before the
-    # setting_id pass reads the files back.
-    do_filament = args.filament_id or not args.setting_id
-    do_setting = args.setting_id or not args.filament_id
-    changed = set()  # one file the two passes both touch is still one file
-    filament_files = errors = 0
-    if do_filament:
-        filament_files, e = generate_filament_ids(
-            args.profiles, vendors, args.dry_run, changed)
-        errors += e
-    if do_setting:
-        _n, e = generate_setting_ids(args.profiles, vendors, args.dry_run, changed)
-        errors += e
-
-    summary = (f"dry run: {len(changed)} file(s) would change; nothing written"
-               if args.dry_run else f"{len(changed)} file(s) changed")
-    if errors:
-        print_error(f"{summary}; {errors} error(s)")
-    else:
-        print_success(summary)
-    if filament_files and not args.dry_run:
-        # A filament_id write may or may not move the sanctioned state (an id
-        # repaired back to the value the snapshot already records does not), so
-        # regenerate and let the diff — empty or not — say.
-        print_warning('now run "python scripts/orca_id_tool.py --update-snapshot" '
-                      "and commit any resulting diff for maintainer review")
-    return 1 if errors else 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())
diff --git a/scripts/orca_profile_tool.py b/scripts/orca_profile_tool.py
new file mode 100755
index 0000000000..100e7cba3f
--- /dev/null
+++ b/scripts/orca_profile_tool.py
@@ -0,0 +1,2419 @@
+#!/usr/bin/env python3
+"""
+Every maintenance job for the OrcaSlicer system profile tree, in one tool.
+
+usage: python scripts/orca_profile_tool.py <command> [options]
+
+commands:
+  check            validate the whole tree -- what CI runs
+  generate-id      write the filament_id / setting_id each profile's identity implies
+  normalize        rewrite profile files into their canonical shape
+  trim             delete profile files no <vendor>.json list references
+  update-index     regenerate the *_list sections of <vendor>.json
+
+options shared by several commands:
+  --vendor VENDOR      act on one vendor bundle only; repeatable, empty means all
+  --profile-type TYPE  one of machine_model/process/filament/machine; repeatable
+                       (normalize, trim, update-index)
+  --dry-run            report what would change and write nothing (every command
+                       that writes)
+  --profiles DIR       act on another profile tree (default: resources/profiles)
+
+After adding, renaming or deleting profile files, run:
+  normalize -> update-index -> generate-id -> check
+normalize supplies missing types; update-index registers presets before id
+generation.
+Use trim only for deliberate cleanup, previewed with --dry-run: it judges against
+the current index and can delete newly added, unindexed presets.
+
+Run from anywhere; "python scripts/orca_profile_tool.py --help" repeats this list
+and "... <command> --help" documents one command in full.
+
+The two id rules are the heart of it. Both ids are pure functions of the thing
+they name, so nothing here is ever invented: the tool only writes the id the
+rules below already imply, and a tree that already satisfies them is left
+untouched.
+
+filament_id policy (see docs/HLSD/filament_id.md):
+  * filament_id is a PRODUCT id: one named spool product = one id, shared by all
+    of that product's per-printer/per-nozzle variants in every bundle. The
+    granularity is the name on the spool, not the brand: "AAA PLA Lite" and
+    "AAA PLA Pro" are two products with two ids, not variants of one. The
+    id is a pure function of the product triple (below), so WHERE a preset gets
+    it from is irrelevant: it may declare the key itself or inherit it from any
+    ancestor — a root preset, a real (instantiated) filament, an
+    OrcaFilamentLibrary (OFL) preset — as long as the id it ends up with is the
+    mint of its OWN triple. Inheritance carries settings, never identity; the
+    key is bundle-independent, so moving a filament into OFL never changes it.
+  * Ids are content-addressed by the product triple, resolved from the preset's
+    flattened config (filament_vendor and filament_type are inheritable list
+    options — first element; filament name = preset base name):
+        filament_id = "OF" + base62_6( uuid5(FILAMENT_ID_NAMESPACE,
+            "filament_product/<filament_vendor>/<filament_type>/<filament_name>") )
+    8 chars total, which satisfies the AMS length limit. Nobody invents ids by
+    hand, and nothing but the triple feeds the mint — not the rest of the tree.
+    Two products whose triples mint one id (a base62
+    collision; odds ~1e-5 over the whole tree) is an error --check reports and
+    --generate refuses to write; the remedy is a rename so the triples differ,
+    never a salted or hand-picked second id.
+    Identity changes (a filament rename, a filament_vendor/filament_type fix)
+    change the id BY DESIGN.
+  * EVERY filament profile carries a minted id, with no exceptions and no
+    spellings held back for anyone. Ids that other systems compose for their own
+    purposes are simply not mints, so no system profile can carry one and there
+    is nothing to reserve: Bambu's GF* catalog ids (the generated
+    resources/printers/bambu_filament_ids.json records the correspondence, which
+    the app applies at the printer boundary), the QD_* ids a Qidi box composes at
+    runtime, and the P+7-hex ids CreatePresetsDialog.cpp gives user-created
+    filaments all fail the format rule like any other stray value.
+
+setting_id policy (see AGENTS.md "Critical Constraints"):
+  * setting_id is a PRESET id, a pure function of the preset's identity:
+        setting_id = base62_16( uuid5(NAMESPACE, "<vendor>/<type>/<name>") )
+    The same value is recomputed on the fly by the C++ app
+    (Slic3r::generate_preset_setting_id); the two MUST stay byte-identical.
+    Uniqueness is therefore automatic: two presets collide only if they share
+    vendor + type + name, which "check" flags.
+  * Only instantiated presets (instantiation == "true") carry a setting_id;
+    base / template profiles do not.
+  * Bambu (BBL) owns the authoritative "G*" setting_id space and is the only
+    reserved vendor: its setting_ids are never rewritten, which keeps
+    Bambu-synced presets backward compatible. That exemption is setting_id's
+    alone — BBL's filament_ids are minted like every other vendor's.
+
+The effective-id resolution below is loader-faithful (PresetBundle.cpp
+load_vendor_configs_from_json): own filament_id key, else walk `inherits` within
+the vendor map, with OrcaFilamentLibrary base-bundle fallback; once a chain enters
+OFL it stays in OFL; a vendor chain that dead-ends id-less retries its direct
+parent in the OFL map. filament_vendor / filament_type resolve the same way.
+"""
+
+import argparse
+import json
+import os
+import posixpath
+import re
+import sys
+import uuid
+from collections import Counter, defaultdict
+from pathlib import Path
+
+# The id namespace baked into both Python and C++ (Slic3r::generate_preset_setting_id).
+# Dedicated, distinct from the cloud namespace (f47ac10b-...) so the two id spaces never
+# coincide; it is the root of BOTH id rules below — never change it.
+NAMESPACE = uuid.UUID("c1f4d9e2-7a3b-5c8d-9e0f-1a2b3c4d5e6f")
+ALPHABET = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"
+SETTING_ID_LENGTH = 16
+
+# Dedicated namespace for filament_id, derived from the setting_id namespace above.
+# Never change it.
+# FILAMENT_ID_NAMESPACE == UUID("c4d3ff49-4c32-5534-a3e3-00894157ab97")
+FILAMENT_ID_NAMESPACE = uuid.uuid5(NAMESPACE, "filament_id")
+FILAMENT_ID_LENGTH = 6  # base62 digits after the "OF" prefix -> 8 chars total
+
+SCRIPTS_DIR = os.path.dirname(os.path.abspath(__file__))
+PROFILES_DIR = os.path.normpath(os.path.join(SCRIPTS_DIR, "..", "resources", "profiles"))
+# The single source of truth for the map path; update_bambu_filament_ids.py
+# imports this rather than recomputing it.
+BAMBU_MAP_PATH = os.path.normpath(
+    os.path.join(SCRIPTS_DIR, "..", "resources", "printers", "bambu_filament_ids.json"))
+
+OFL = "OrcaFilamentLibrary"
+# The validator's data dir, created under resources/profiles by a local run;
+# not a vendor bundle, so an unscoped pass leaves it alone.
+USER_DIR = "user"
+
+# Bambu (BBL) is the only vendor exempt from the setting_id rule: it keeps its
+# authoritative "G*" cloud ids. No vendor is exempt from the filament_id rule.
+RESERVED_VENDORS = {"BBL"}
+
+# The profile types that carry a setting_id; the subdir name is also the type
+# name, matching Preset::get_type_string() on the C++ side.
+PROFILE_SUBDIRS = ("filament", "process", "machine")
+
+# The profile kinds a <vendor>.json indexes, each under its "<type>_list" section.
+# NOT the same thing as PROFILE_SUBDIRS above, and deliberately not merged with it:
+# machine_model is an index section whose files live in the machine/ directory, and
+# this order is the order the sections are rebuilt (and therefore written) in.
+PROFILE_TYPES = ("machine_model", "process", "filament", "machine")
+
+# Data files that sit under a vendor bundle but are not presets: no name, no type.
+NON_PROFILE_FILES = {"filaments_color_codes.json", "cli_config.json"}
+
+# Mirror PrintConfigDef::handle_legacy's ignore set in PrintConfig.cpp; a test
+# checks parity. Used by normalize and check. Active options and
+# legacy aliases that the loader migrates do not belong here.
+OBSOLETE_KEYS = {
+    "acceleration", "scale", "rotate", "duplicate", "duplicate_grid",
+    "bed_size", "print_center", "g0", "wipe_tower_per_color_wipe",
+    "support_sharp_tails", "support_remove_small_overhangs", "support_with_sheath",
+    "tree_support_collision_resolution", "tree_support_with_infill",
+    "max_volumetric_speed", "max_print_speed", "support_closing_radius",
+    "remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
+    "support_transition_line_width", "support_transition_speed", "bed_temperature",
+    "bed_temperature_initial_layer", "can_switch_nozzle_type", "can_add_auxiliary_fan",
+    "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height",
+    "z_hop_type", "z_lift_type", "bed_temperature_difference", "long_retraction_when_cut",
+    "retraction_distance_when_cut", "internal_bridge_support_thickness",
+    "top_area_threshold", "reduce_wall_solid_infill",
+    "filament_load_time", "filament_unload_time", "smooth_coefficient",
+    "overhang_totally_speed", "silent_mode", "overhang_speed_classic",
+    "anisotropic_surfaces",
+}
+
+# Keys renamed at some point, whose old and new spellings must never co-exist:
+# the loader would pick one arbitrarily. extruder_clearance_radius vs
+# extruder_clearance_max_radius decides toolhead collision avoidance.
+CONFLICT_KEYS = [
+    ["extruder_clearance_radius", "extruder_clearance_max_radius"],
+]
+
+# Options the config system stores as vectors; a scalar there is a silent misload.
+VECTOR_KEYS = {
+    "filament_type",
+}
+
+OF_ID_RE = re.compile(r"^OF[0-9A-Za-z]{6}$")
+# Filament name = preset base name: strip the first "@..." suffix. The space before
+# "@" is optional because names like "Afinia PLA@HS" exist.
+BASE_NAME_RE = re.compile(r"\s?@.*$")
+# A JSON string literal, for the byte-preserving key edits.
+_JSON_STR = r'"(?:[^"\\]|\\.)*"'
+
+GENERATE_CMD = "python scripts/orca_profile_tool.py generate-id"
+SETTING_ID_CMD = '"python scripts/orca_profile_tool.py generate-id --setting-id"'
+BAMBU_MAP_HINT = 'regenerate the map with "python scripts/update_bambu_filament_ids.py" and commit the diff for maintainer review'
+NORMALIZE_HINT = 'try "python scripts/orca_profile_tool.py normalize" to fix common issues automatically'
+
+# What to do about a defect check found, keyed by defect. check prints each of these
+# ONCE for the whole run, after the files themselves: a bundle that forgot to index
+# twenty presets needs the remedy spelled out once, not twenty times over the one list
+# a maintainer has to read.
+REMEDY_HINTS = {
+    "unindexed": 'unreferenced file(s) above: delete them, or run "python scripts/'
+                 'orca_profile_tool.py update-index" to add them to their <vendor>.json',
+    "unindexable": 'unreferenced file(s) above declare no profile type: run "python '
+                   'scripts/orca_profile_tool.py normalize" to write one so '
+                   "update-index can place them, or delete them",
+    "unnormalized": 'profile file(s) above are not what "python scripts/'
+                    'orca_profile_tool.py normalize" writes: run it and commit the result',
+    "stale_index": 'vendor index(es) above are not what "python scripts/'
+                   'orca_profile_tool.py update-index" writes: run it and commit the '
+                   "result",
+}
+
+
+def print_error(msg):
+    print(f"\033[91m[ERROR]\033[0m {msg}")  # Red
+
+def print_warning(msg):
+    print(f"\033[93m[WARNING]\033[0m {msg}")  # Yellow
+
+def print_info(msg):
+    print(f"\033[94m[INFO]\033[0m {msg}")  # Blue
+
+def print_success(msg):
+    print(f"\033[92m[SUCCESS]\033[0m {msg}")  # Green
+
+
+def _utf8_console():
+    """Make stdout/stderr survive non-ASCII profile names on cp1252 consoles."""
+    for stream in (sys.stdout, sys.stderr):
+        if hasattr(stream, "reconfigure"):
+            try:
+                stream.reconfigure(encoding="utf-8", errors="replace")
+            except (ValueError, OSError):
+                pass
+
+
+# ---------------------------------------------------------------------------
+# Minting
+# ---------------------------------------------------------------------------
+
+def _base62_tail(n, length):
+    """The low `length` base62 digits of n, most-significant first.
+
+    The shared tail of both id rules. Its output bytes are pinned by the C++
+    golden vectors (tests/libslic3r/test_preset_setting_id.cpp) and by every
+    filament_id in the tree — never change it.
+    """
+    digits = []
+    for _ in range(length):
+        digits.append(ALPHABET[n % 62])
+        n //= 62
+    return "".join(reversed(digits))
+
+
+def generate_preset_setting_id(vendor, type_name, name):
+    """Deterministic 16-char base62 setting_id for a preset.
+
+    input = f"{vendor}/{type_name}/{name}"; u = uuid5(NAMESPACE, input);
+    id = the low SETTING_ID_LENGTH base62 digits of int(u.bytes, "big"),
+    most-significant first. Kept byte-identical to the C++
+    Slic3r::generate_preset_setting_id.
+    """
+    u = uuid.uuid5(NAMESPACE, f"{vendor}/{type_name}/{name}")
+    return _base62_tail(int.from_bytes(u.bytes, "big"), SETTING_ID_LENGTH)
+
+
+def base_name(name):
+    """Filament name of a preset: name with the first "@..." suffix stripped."""
+    return BASE_NAME_RE.sub("", name, count=1)
+
+
+def generate_filament_id(filament_vendor, filament_type, filament_name):
+    """Deterministic "OF" + 6-char base62 filament_id for a filament product.
+
+    The triple is the only input: no salt, no state, no second value.
+    input = "filament_product/<filament_vendor>/<filament_type>/<filament_name>";
+    u = uuid5(FILAMENT_ID_NAMESPACE, input); the id tail is the low
+    FILAMENT_ID_LENGTH base62 digits of int(u.bytes, "big"), most-significant
+    first — the same derivation as generate_preset_setting_id.
+    """
+    key = f"filament_product/{filament_vendor}/{filament_type}/{filament_name}"
+    u = uuid.uuid5(FILAMENT_ID_NAMESPACE, key)
+    return "OF" + _base62_tail(int.from_bytes(u.bytes, "big"), FILAMENT_ID_LENGTH)
+
+
+# ---------------------------------------------------------------------------
+# Tree loading + loader-faithful effective-id resolution
+# ---------------------------------------------------------------------------
+
+class DuplicateKeyError(ValueError):
+    """A profile declares one key twice; json would silently keep the last."""
+
+
+def _no_duplicates_hook(pairs):
+    seen = {}
+    for key, value in pairs:
+        if key in seen:
+            raise DuplicateKeyError(f"Duplicate key detected: {key}")
+        seen[key] = value
+    return seen
+
+
+def load_json(path, detect_duplicates=False):
+    """Parse a profile file. BOM-tolerant, because some vendors ship one.
+
+    detect_duplicates is opt-in rather than always on: only the checks that have
+    always had it use it, since switching it on everywhere would newly reject files
+    the tree has always accepted, and switching it off would lose real coverage.
+    """
+    with open(path, "r", encoding="utf-8-sig") as f:
+        return json.load(f, object_pairs_hook=_no_duplicates_hook if detect_duplicates
+                         else None)
+
+
+def list_vendor_names(profiles_dir):
+    """Vendor bundles = subdirectories with a matching <name>.json index file.
+
+    (Ignores stray non-bundle entries such as the tracked "user" directory,
+    which has no user.json index.)
+    """
+    profiles_dir = str(profiles_dir)
+    return sorted(
+        os.path.splitext(f)[0] for f in os.listdir(profiles_dir)
+        if f.endswith(".json")
+        and os.path.isdir(os.path.join(profiles_dir, os.path.splitext(f)[0]))
+    )
+
+
+def list_profile_dirs(profiles_dir):
+    """Every vendor directory under the tree, index or not.
+
+    What the setting_id pass and the per-vendor checks walk: setting_id is a
+    per-file property, so a bundle whose index has not landed yet must still be
+    assignable — otherwise check flags files generate-id refuses to touch.
+    (filament_id is driven by each bundle's filament_list instead, hence
+    list_vendor_names above.)
+    """
+    profiles_dir = str(profiles_dir)
+    return sorted(d for d in os.listdir(profiles_dir)
+                  if os.path.isdir(os.path.join(profiles_dir, d)))
+
+
+def iter_profile_files(vendor_dir):
+    """Yield (json path, type) under a vendor bundle, in a deterministic order."""
+    for sub in PROFILE_SUBDIRS:
+        base = os.path.join(vendor_dir, sub)
+        if not os.path.isdir(base):
+            continue
+        for root, dirs, files in os.walk(base):
+            dirs.sort()  # deterministic traversal across filesystems
+            for name in sorted(files):
+                if name.endswith(".json"):
+                    yield os.path.join(root, name), sub
+
+
+def load_vendor_filaments(profiles_dir, vendor):
+    """Load a vendor's filament presets from its index's filament_list.
+
+    Returns (presets dict name -> record, list of unreadable-file messages).
+    """
+    profiles_dir = str(profiles_dir)
+    presets = {}
+    errors = []
+    try:
+        idx = load_json(os.path.join(profiles_dir, vendor + ".json"))
+    except (OSError, ValueError) as e:
+        return presets, [f"unreadable vendor index {vendor}.json: {e}"]
+    for entry in idx.get("filament_list", []):
+        rel = f"{vendor}/{entry.get('sub_path', '')}"
+        path = os.path.join(profiles_dir, vendor, entry.get("sub_path", ""))
+        try:
+            data = load_json(path)
+        except (OSError, ValueError) as e:
+            errors.append(f"unreadable filament profile {rel}: {e}")
+            continue
+        name = data.get("name", entry.get("name"))
+        presets[name] = {
+            "name": name,
+            "file": rel,
+            "path": path,
+            "filament_id": data.get("filament_id"),
+            "inherits": data.get("inherits"),
+            "instantiation": str(data.get("instantiation", "")).lower() == "true",
+            "compatible_printers": data.get("compatible_printers") or [],
+            "filament_vendor": data.get("filament_vendor"),
+            "filament_type": data.get("filament_type"),
+            "renamed_from": data.get("renamed_from"),
+        }
+    return presets, errors
+
+
+def resolve_filament_id(name, filaments, ofl_filaments, seen=None, in_ofl=False):
+    """Walk the inherits chain for the effective filament_id, loader-faithfully.
+
+    Mirrors PresetBundle.cpp load_vendor_configs_from_json: a hop resolves in the
+    vendor's own map first, then falls back to the OFL base-bundle map. OFL's map
+    was memoized entirely within OFL, so once a chain enters OFL it stays in OFL
+    (a vendor file sharing an OFL preset's name must not shadow OFL-internal
+    hops). Additionally, a vendor preset that never resolves an id inside the
+    vendor is re-tried against the OFL map keyed by its direct parent name.
+
+    Returns (filament_id or None, source, ofl_entry) where source is one of
+    "own"/"inherited"/"missing"/"dangling"/"cycle" and ofl_entry is the name of
+    the OFL preset through which a vendor chain entered OFL (None when the id was
+    declared vendor-side or resolution started inside OFL).
+    """
+    if seen is None:
+        seen = set()
+    if name in seen:
+        return None, "cycle", None
+    seen.add(name)
+    entry = None
+    if in_ofl:
+        rec = ofl_filaments.get(name)
+    else:
+        rec = filaments.get(name)
+        if rec is None and name in ofl_filaments:
+            rec, in_ofl, entry = ofl_filaments[name], True, name
+    if rec is None:
+        return None, "dangling", None
+    if rec.get("filament_id"):
+        return rec["filament_id"], "own" if len(seen) == 1 else "inherited", entry
+    parent = rec.get("inherits")
+    if parent:
+        fid, src, sub_entry = resolve_filament_id(parent, filaments, ofl_filaments, seen, in_ofl)
+        if fid or in_ofl:
+            return fid, src, entry if entry is not None else sub_entry
+        # Vendor chain dead-ended id-less: the loader would have consulted the
+        # OFL map at each vendor hop's inherits; retry this hop's parent in OFL.
+        if parent in ofl_filaments:
+            fid, src, _ = resolve_filament_id(parent, filaments, ofl_filaments, set(), True)
+            return fid, src, parent
+        return fid, src, sub_entry
+    return None, "missing", entry
+
+
+def resolve_filament_field(name, field, filaments, ofl_filaments, seen=None, in_ofl=False):
+    """Resolve an inheritable list option (filament_vendor / filament_type) with
+    the same hop semantics as resolve_filament_id: own value, else walk
+    `inherits` in the vendor map with OFL base-bundle fallback. Values are list
+    options — the first element counts; "" when the chain never defines one.
+    """
+    if seen is None:
+        seen = set()
+    if name in seen:
+        return ""
+    seen.add(name)
+    if in_ofl:
+        rec = ofl_filaments.get(name)
+    else:
+        rec = filaments.get(name)
+        if rec is None and name in ofl_filaments:
+            rec, in_ofl = ofl_filaments[name], True
+    if rec is None:
+        return ""
+    value = rec.get(field)
+    if isinstance(value, str):
+        value = [value]
+    if value and value[0]:
+        return value[0]
+    parent = rec.get("inherits")
+    if parent:
+        found = resolve_filament_field(parent, field, filaments, ofl_filaments, seen, in_ofl)
+        if found or in_ofl:
+            return found
+        if parent in ofl_filaments:
+            return resolve_filament_field(parent, field, filaments, ofl_filaments, set(), True)
+        return found
+    return ""
+
+
+def resolve_triple(name, filaments, ofl_filaments):
+    """The preset's mint-key triple (filament_vendor, filament_type, filament name)."""
+    return (resolve_filament_field(name, "filament_vendor", filaments, ofl_filaments),
+            resolve_filament_field(name, "filament_type", filaments, ofl_filaments),
+            base_name(name))
+
+
+def analyze_tree(profiles_dir):
+    """Load every vendor bundle and derive the full filament_id state.
+
+    Returns a dict of the tree-derived state the checks and the assign pass need,
+    tree-wide including OFL and BBL.
+    """
+    profiles_dir = str(profiles_dir)
+    vendor_names = list_vendor_names(profiles_dir)
+    ofl_filaments, ofl_errors = (
+        load_vendor_filaments(profiles_dir, OFL) if OFL in vendor_names else ({}, [])
+    )
+
+    vendors = {}
+    read_errors = list(ofl_errors)
+    for vendor in vendor_names:
+        if vendor == OFL:
+            filaments = ofl_filaments
+        else:
+            filaments, errs = load_vendor_filaments(profiles_dir, vendor)
+            read_errors.extend(errs)
+        for rec in filaments.values():
+            eff, src, _entry = resolve_filament_id(rec["name"], filaments, ofl_filaments)
+            rec["eff_filament_id"] = eff
+            rec["id_source"] = src
+        vendors[vendor] = filaments
+
+    vendor_ids = {}             # vendor -> set of ids occurring there (declared or effective)
+    declared_ids = {}           # vendor -> set of ids DECLARED in that vendor's own files
+    missing_effective = []      # (vendor, name, file) instantiated presets resolving no id
+    inherited = []              # (vendor, rec, eff, triple) instantiated presets inheriting an OF id
+    triples = {}                # fid -> set of triples of its declarers
+    declarer_triples = []       # (vendor, rec, fid, triple) per declarer
+    filament_triples = {}       # (vendor, filament_name) -> {triple: [declarers]}
+    mints = {}                  # minted id -> triples minting it (declarers + instantiated)
+
+    for vendor, filaments in vendors.items():
+        occurring = vendor_ids.setdefault(vendor, set())
+        for rec in filaments.values():
+            triple = resolve_triple(rec["name"], filaments, ofl_filaments)
+            rec["triple"] = triple
+            if rec.get("filament_id") or rec["instantiation"]:
+                mints.setdefault(generate_filament_id(*triple), set()).add(triple)
+            if rec.get("filament_id"):
+                fid = rec["filament_id"]
+                occurring.add(fid)
+                declared_ids.setdefault(vendor, set()).add(fid)
+                declarer_triples.append((vendor, rec, fid, triple))
+                triples.setdefault(fid, set()).add(triple)
+                filament_triples.setdefault(
+                    (vendor, base_name(rec["name"])), {}).setdefault(
+                    triple, []).append(rec["name"])
+            if not rec["instantiation"]:
+                continue
+            eff = rec.get("eff_filament_id")
+            if not eff:
+                missing_effective.append((vendor, rec["name"], rec["file"]))
+                continue
+            occurring.add(eff)
+            if not rec.get("filament_id") and OF_ID_RE.match(eff):
+                inherited.append((vendor, rec, eff, triple))
+
+    # Cross-bundle triple divergence (check 3, warning only): the same filament
+    # name declared in several bundles with different triples cannot converge
+    # on one id until the divergence is fixed.
+    name_bundles = {}
+    for (vendor, filament_name), tmap in filament_triples.items():
+        name_bundles.setdefault(filament_name, {})[vendor] = frozenset(tmap)
+    cross_bundle_triples = [
+        (filament_name, {v: sorted(ts) for v, ts in per_vendor.items()})
+        for filament_name, per_vendor in sorted(name_bundles.items())
+        if len(per_vendor) > 1 and len(set(per_vendor.values())) > 1
+    ]
+
+    return {
+        "vendors": vendors,
+        "read_errors": read_errors,
+        "vendor_ids": vendor_ids,
+        "declared_ids": declared_ids,
+        "missing_effective": sorted(missing_effective),
+        "inherited": inherited,
+        "triples": {fid: sorted(list(t) for t in ts) for fid, ts in triples.items()},
+        "declarer_triples": declarer_triples,
+        "filament_triples": filament_triples,
+        "cross_bundle_triples": cross_bundle_triples,
+        # id -> the products (triples) minting it, where there is more than one
+        "collisions": {fid: sorted(ts) for fid, ts in mints.items() if len(ts) > 1},
+    }
+
+
+# ---------------------------------------------------------------------------
+# filament_id validation
+# ---------------------------------------------------------------------------
+
+def check_filament_ids(profiles_dir=PROFILES_DIR, map_path=BAMBU_MAP_PATH):
+    """Validate filament_id state across every vendor. Returns the error count.
+
+    1. Format: every id occurring in the tree (declared or effective) must
+       match ^OF[0-9A-Za-z]{6}$. No exceptions, not even BBL.
+    2. Identity: the id is a function of the triple alone, and there is no
+       second acceptable value. (a) A declared id must equal the one id the
+       declarer's own triple mints; (b) the id an instantiated preset inherits
+       must equal the one ITS own triple mints — how it inherits it (a root, a
+       real filament, an OFL preset) is irrelevant; (c) every instantiated
+       filament resolves an effective id at all (an id-less one is a hard load
+       error in C++); (d) no two products mint one id (a base62 collision,
+       resolved by renaming one of them).
+    3. Triple integrity: (a) every declarer resolves non-empty filament_vendor
+       and filament_type; (b) declarers of one (bundle, filament) resolve
+       identical triples; cross-bundle divergence on the same filament name is a
+       warning only.
+    4. Bambu catalog map: resources/printers/bambu_filament_ids.json must parse,
+       carry source/bambustudio_commit/generated, key only OF-format ids, map
+       each Bambu id at most once, and for every row whose key the tree claims,
+       the tree's triple for that id must equal the row's (vendor, type, name).
+    """
+    _utf8_console()
+    errors = 0
+    analysis = analyze_tree(profiles_dir)
+    for msg in analysis["read_errors"]:
+        print_error(msg)
+        errors += 1
+
+    # -- 1. format ----------------------------------------------------------
+    for vendor in sorted(analysis["vendor_ids"]):
+        for fid in sorted(analysis["vendor_ids"][vendor]):
+            if OF_ID_RE.match(fid):
+                continue
+            print_error(
+                f'filament_id "{fid}" ({vendor}) is not a minted "OF" id; new '
+                f'filament ids must come from "{GENERATE_CMD}"')
+            errors += 1
+
+    # -- 2. identity: the id is a function of the triple alone ---------------
+    # One triple, one id: a declaration must carry exactly the mint of its
+    # triple, and there is no second acceptable value — not a salt, not a
+    # hand-picked one, not whatever another preset of the product carries. Two
+    # presets of one product that would be AMS-ambiguous on a printer are fixed
+    # in the profiles, by making their compatible_printers disjoint or by
+    # retiring the redundant one.
+    for vendor, rec, fid, triple in sorted(
+            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
+        want = generate_filament_id(*triple)
+        if not OF_ID_RE.match(fid) or fid == want:
+            continue  # a non-OF id is check 1's error
+        print_error(
+            f'filament_id "{fid}" declared by "{rec["name"]}" ({rec["file"]}) does '
+            f'not match the mint of its triple "{"/".join(triple)}": expected '
+            f'"{want}"; paste the expected id, or fix the triple and run '
+            f'"{GENERATE_CMD} --vendor {vendor}" (preview with --dry-run)')
+        errors += 1
+    # (2b) An inherited id is held to the same single value, and every preset
+    # missing it is listed — a variant under a wrong root as much as a preset
+    # riding another product's root. Nothing is folded into the declarer's
+    # error: the report names each preset whose id is wrong.
+    for vendor, rec, eff, triple in sorted(
+            analysis["inherited"], key=lambda x: (x[0], x[1]["file"])):
+        want = generate_filament_id(*triple)
+        if eff == want:
+            continue
+        print_error(
+            f'preset "{rec["name"]}" ({rec["file"]}) inherits filament_id "{eff}" but '
+            f'its own triple "{"/".join(triple)}" mints "{want}"; '
+            f"a preset carries the id of its own product: inherit a preset of the "
+            f"same filament, or declare its own key")
+        errors += 1
+    ofl_map = analysis["vendors"].get(OFL, {})
+    for vendor, name, file in analysis["missing_effective"]:
+        triple = resolve_triple(name, analysis["vendors"][vendor], ofl_map)
+        expected = generate_filament_id(*triple)
+        print_error(
+            f'instantiated filament "{name}" ({file}) resolves no filament_id anywhere '
+            f"in its inherits chain — this is a hard load error in the C++ loader; "
+            f'run "{GENERATE_CMD}" (expected id for filament '
+            f'"{vendor}/{base_name(name)}": "{expected}")')
+        errors += 1
+    # (2d) The mint is injective over the tree's products, or two of them are
+    # indistinguishable to every device that matches on the id.
+    for fid, ts in sorted(analysis["collisions"].items()):
+        print_error(
+            f'filament_id "{fid}" is the mint of {len(ts)} different products '
+            f'({"; ".join("/".join(t) for t in ts)}): a base62 collision; rename one '
+            f"of them so their triples differ")
+        errors += 1
+
+    # -- 3. triple integrity ---------------------------------------------------
+    for vendor, rec, fid, triple in sorted(
+            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
+        if triple[0] and triple[1]:
+            continue
+        missing = " and ".join(
+            k for k, v in (("filament_vendor", triple[0]),
+                           ("filament_type", triple[1])) if not v)
+        print_error(
+            f'preset "{rec["name"]}" ({rec["file"]}) declares filament_id "{fid}" but '
+            f"resolves empty {missing}; the mint key needs both (generic materials "
+            f'use filament_vendor "Generic")')
+        errors += 1
+    for (vendor, filament_name), tmap in sorted(analysis["filament_triples"].items()):
+        if len(tmap) < 2:
+            continue
+        detail = "; ".join(
+            f'"{"/".join(t)}" ({", ".join(sorted(names))})'
+            for t, names in sorted(tmap.items()))
+        print_error(
+            f'filament "{vendor}/{filament_name}" declarers resolve divergent triples: '
+            f"{detail}; declarers of one filament must agree on "
+            f"(filament_vendor, filament_type)")
+        errors += 1
+    for filament_name, per_vendor in analysis["cross_bundle_triples"]:
+        detail = "; ".join(
+            f'{v}: {", ".join("/".join(t) for t in ts)}'
+            for v, ts in sorted(per_vendor.items()))
+        print_warning(
+            f'filament name "{filament_name}" resolves different triples across bundles '
+            f"({detail}); bundles of one product converge on one id only once "
+            f"their triples agree")
+
+    # -- 4. Bambu catalog map --------------------------------------------------
+    try:
+        bambu_map = load_json(map_path)
+        if not isinstance(bambu_map, dict):
+            raise ValueError("top level is not a JSON object")
+    except (OSError, ValueError) as e:
+        print_error(f"Bambu catalog map {map_path} does not parse ({e}); {BAMBU_MAP_HINT}")
+        errors += 1
+    else:
+        for key in ("source", "bambustudio_commit", "generated"):
+            if not bambu_map.get(key):
+                print_error(f'Bambu catalog map {map_path} is missing "{key}"; {BAMBU_MAP_HINT}')
+                errors += 1
+        rows = bambu_map.get("filaments")
+        # An empty or absent section is not a well-formed map: it makes every runtime
+        # translation silently degrade to identity (BBLPrinterAgent logs nothing for it),
+        # and it is what a regeneration against the wrong --bambustudio-dir writes.
+        if not isinstance(rows, dict) or not rows:
+            print_error(f'Bambu catalog map {map_path} declares no "filaments" rows; '
+                        f"{BAMBU_MAP_HINT}")
+            errors += 1
+            rows = {}
+        bambu_id_owners = {}
+        for fid, row in sorted(rows.items()):
+            if not OF_ID_RE.match(fid):
+                print_error(f'Bambu catalog map key "{fid}" is not a minted "OF" id; '
+                           f"{BAMBU_MAP_HINT}")
+                errors += 1
+            bambu_id = row.get("bambu_id")
+            if not bambu_id:
+                # An empty id would map the empty string to a real filament at runtime.
+                print_error(f'Bambu catalog map row "{fid}" declares no "bambu_id"; '
+                            f"{BAMBU_MAP_HINT}")
+                errors += 1
+            elif bambu_id in bambu_id_owners:
+                print_error(
+                    f'Bambu catalog map: Bambu id "{bambu_id}" is mapped by both '
+                    f'"{bambu_id_owners[bambu_id]}" and "{fid}"; {BAMBU_MAP_HINT}')
+                errors += 1
+            else:
+                bambu_id_owners[bambu_id] = fid
+            claimed = analysis["triples"].get(fid)
+            if not claimed:
+                continue  # a product BambuStudio ships that the tree does not (yet)
+            row_triple = [row.get("vendor", ""), row.get("type", ""), row.get("name", "")]
+            if row_triple not in claimed:
+                print_error(
+                    f'Bambu catalog map row "{fid}" claims triple "{"/".join(row_triple)}" '
+                    f'but the tree declares "{"; ".join("/".join(t) for t in claimed)}" for '
+                    f"that id; {BAMBU_MAP_HINT}")
+                errors += 1
+
+    return errors
+
+
+# ---------------------------------------------------------------------------
+# setting_id validation
+# ---------------------------------------------------------------------------
+
+def check_setting_id_uniqueness(profiles_dir):
+    """Validate setting_id across every vendor. Returns the error count.
+
+      1. Every instantiated preset must HAVE a setting_id.            (all vendors)
+      2. A stored setting_id must equal generate_preset_setting_id(vendor, type,
+         name); a stale value means the JSON was edited without rerunning
+         generate-id.               (all vendors EXCEPT the reserved ones, i.e. BBL)
+      3. Base profiles (instantiation != "true") must not carry a setting_id.
+      4. setting_id must be globally unique - no two files may share one.
+      5. No profile may use the misspelled key "settings_id".
+
+    Cross-vendor by nature (rule 4), so it always runs over the whole tree, never
+    narrowed by --vendor. BBL keeps its authoritative "G*" cloud ids, which the
+    formula does not produce, so only rule 2 is skipped for it; it is still held to
+    presence, uniqueness, base-no-id and the typo check.
+    """
+    errors = 0
+    owners = {}  # setting_id -> [relative path], every vendor
+    for vendor in list_profile_dirs(profiles_dir):
+        formula_exempt = vendor in RESERVED_VENDORS
+        for path, sub in iter_profile_files(os.path.join(profiles_dir, vendor)):
+            try:
+                data = load_json(path)
+            except (ValueError, OSError):
+                # Parse failures are reported by the per-vendor checks, which walk
+                # the same files; reporting them here too would double-count.
+                continue
+            if not isinstance(data, dict):
+                continue
+            rel = os.path.relpath(path, profiles_dir).replace(os.sep, "/")
+            # Rule 5: catch the misspelled "settings_id" key.
+            if "settings_id" in data:
+                errors += 1
+                print_error(
+                    f'profile {rel} uses the misspelled key "settings_id" '
+                    f'(should be "setting_id"); run {SETTING_ID_CMD}')
+            sid = data.get("setting_id")
+            if data.get("instantiation") != "true":
+                # Rule 3: base/template profiles must not carry a setting_id.
+                if sid:
+                    errors += 1
+                    print_error(
+                        f'base profile {rel} (instantiation != "true") must not have a '
+                        f'setting_id ("{sid}"); run {SETTING_ID_CMD}')
+                continue
+            # Rule 1: every instantiated preset must have a setting_id.
+            if not sid:
+                errors += 1
+                print_error(f"instantiated preset {rel} is missing a setting_id; "
+                            f"run {SETTING_ID_CMD}")
+                continue
+            # Rule 2: the stored id must match the deterministic rule.
+            if not formula_exempt:
+                expected = generate_preset_setting_id(vendor, sub, data.get("name", ""))
+                if sid != expected:
+                    errors += 1
+                    print_error(
+                        f'setting_id "{sid}" in {rel} does not match the expected '
+                        f'"{expected}" for {vendor}/{sub}/{data.get("name", "")}; '
+                        f"run {SETTING_ID_CMD}")
+                    continue
+            owners.setdefault(sid, []).append(rel)
+
+    # Rule 4: a setting_id shared by two files is an error. For managed vendors that
+    # means a duplicate vendor/type/name; for BBL a copy-pasted id.
+    for sid, locs in sorted(owners.items()):
+        if len(locs) < 2:
+            continue
+        errors += 1
+        print_error(f'setting_id "{sid}" is shared by {len(locs)} files ({sorted(locs)}); '
+                    f"setting_id must be globally unique")
+    return errors
+
+
+# ---------------------------------------------------------------------------
+# Per-vendor validation
+# ---------------------------------------------------------------------------
+# These walk one vendor bundle each and are what --vendor narrows. They use
+# pathlib where the originals did; the check driver converts at the boundary.
+
+def _vendor_json_files(vendor_path):
+    """Every .json under a vendor bundle, deepest-last, in a stable order."""
+    return sorted(vendor_path.rglob("*.json"))
+
+
+def check_preset_name_uniqueness(profiles_dir, vendor):
+    """No two profiles in a bundle may share a type and a name, indexed or not.
+
+    The loader resolves "inherits" through a per-type map of the bundle's profiles
+    (PresetBundle.cpp load_subfiles), and std::map::emplace keeps the first
+    insertion: a second file claiming the name is silently dropped, and which one
+    wins is nothing but index order. An unindexed twin counts too - it is one
+    sub_path edit away from deciding that silently.
+
+    Names are per bundle, never global: base profiles reuse them across vendors by
+    design (fdm_process_common exists in 61 of them). Returns the error count.
+    """
+    errors = 0
+    vendor_dir = os.path.join(profiles_dir, vendor)
+    claimed = defaultdict(list)  # (type, name) -> [sub_path]
+    for path, _sub in iter_profile_files(vendor_dir):
+        if os.path.basename(path) in NON_PROFILE_FILES:
+            continue
+        try:
+            data = load_json(path)
+        except (ValueError, OSError):
+            # Parse failures are reported by the checks that walk the same files;
+            # reporting them here too would double-count.
+            continue
+        if not isinstance(data, dict) or data.get("type") not in PROFILE_TYPES:
+            continue
+        if not data.get("name"):
+            continue  # a nameless profile is check_filament_compatible_printers'
+        claimed[(data["type"], data["name"])].append(
+            posixpath.normpath(os.path.relpath(path, vendor_dir).replace(os.sep, "/")))
+
+    for (profile_type, name), sub_paths in sorted(claimed.items()):
+        if len(sub_paths) < 2:
+            continue
+        errors += 1
+        print_error(f"{vendor} has {len(sub_paths)} {profile_type} profiles named "
+                    f'"{name}" ({", ".join(sorted(sub_paths))}); a bundle holds one '
+                    f"profile per name, so the loader keeps whichever it reaches first "
+                    f"and silently drops the rest")
+    return errors
+
+
+def check_filament_compatible_printers(profiles_dir, vendor):
+    """Every instantiated filament preset must declare a non-empty compatible_printers.
+
+    Orca resolves compatible_printers from the preset itself; inheriting it is not
+    supported on the Profile page. In the OrcaFilamentLibrary it is optional instead:
+    a profile without it is generic and offered on every printer, while one that
+    lists printers supersedes the generic profile there.
+
+    Returns the error count.
+    """
+    error = 0
+    vendor_path = Path(profiles_dir) / vendor / "filament"
+    if not vendor_path.exists():
+        return 0
+
+    profiles = []
+    for file_path in _vendor_json_files(vendor_path):
+        if file_path.name in NON_PROFILE_FILES:
+            continue
+        rel = file_path.relative_to(profiles_dir)
+        try:
+            data = load_json(file_path, detect_duplicates=True)
+        except DuplicateKeyError as e:
+            print_error(f"Duplicate key error in {rel}: {e}")
+            error += 1
+            continue
+        except (ValueError, OSError) as e:
+            print_error(f"Error processing {rel}: {e}")
+            error += 1
+            continue
+
+        profile_name = data.get("name")
+        if not profile_name:
+            print_error(f"'name' missing in {rel}")
+            error += 1
+            continue
+        # Two files claiming this name is check_preset_name_uniqueness' to report,
+        # over the whole bundle rather than the filament/ directory alone.
+        profiles.append((rel, data))
+
+    if vendor == OFL:
+        return error
+
+    for rel, data in profiles:
+        if str(data.get("instantiation", "")).lower() != "true":
+            continue
+        compatible_printers = data.get("compatible_printers")
+        if not compatible_printers:
+            print_error(f"'compatible_printers' missing in {rel}")
+            error += 1
+    return error
+
+
+def load_available_filament_profiles(profiles_dir, vendor):
+    """The set of filament preset names a vendor bundle offers."""
+    profiles = set()
+    vendor_path = Path(profiles_dir) / vendor / "filament"
+    if not vendor_path.exists():
+        return profiles
+
+    for file_path in _vendor_json_files(vendor_path):
+        try:
+            data = load_json(file_path)
+        except (ValueError, OSError) as e:
+            print_error(f"Error loading filament profile "
+                        f"{file_path.relative_to(profiles_dir)}: {e}")
+            continue
+        if isinstance(data, dict) and "name" in data:
+            profiles.add(data["name"])
+    return profiles
+
+
+def check_machine_default_materials(profiles_dir, vendor):
+    """Every default material a machine names must exist, in the bundle or in OFL.
+
+    Returns (errors, warnings); a bundle with no machine/ has nothing to check.
+    """
+    error_count = 0
+    machine_dir = Path(profiles_dir) / vendor / "machine"
+    if not machine_dir.exists():
+        return 0, 0
+
+    available = (load_available_filament_profiles(profiles_dir, vendor)
+                 | load_available_filament_profiles(profiles_dir, OFL))
+
+    for file_path in _vendor_json_files(machine_dir):
+        rel = file_path.relative_to(profiles_dir)
+        try:
+            data = load_json(file_path)
+        except (ValueError, OSError) as e:
+            print_error(f"Error processing machine profile {rel}: {e}")
+            error_count += 1
+            continue
+
+        default_materials = data.get("default_materials") or data.get(
+            "default_filament_profile")
+        if not default_materials:
+            continue
+        if isinstance(default_materials, list):
+            materials = default_materials
+        elif ";" in default_materials:
+            # A ";"-separated list; a trailing separator leaves an empty segment,
+            # which is formatting noise rather than a missing profile.
+            materials = [m.strip() for m in default_materials.split(";") if m.strip()]
+        else:
+            materials = [default_materials]
+        for material in materials:
+            if material not in available:
+                print_error(f"Missing filament profile: '{material}' referenced in {rel}")
+                error_count += 1
+    return error_count, 0
+
+
+def check_name_consistency(profiles_dir, vendor):
+    """Each <vendor>.json entry must name the preset its sub_path file declares.
+
+    A preset loads only if the two agree, so a mismatch silently drops it.
+    Returns (errors, warnings); the warning is the bundle having no index at all.
+    """
+    error_count = 0
+    profiles_path = Path(profiles_dir)
+    vendor_dir = profiles_path / vendor
+    vendor_file = profiles_path / (vendor + ".json")
+    if not vendor_file.exists():
+        print_warning(f"No profiles found for vendor: {vendor} at {vendor_file}")
+        return 0, 1
+
+    try:
+        data = load_json(vendor_file)
+    except (ValueError, OSError) as e:
+        print_error(f"Error loading vendor profile {vendor_file.name}: {e}")
+        return 1, 0
+
+    for section in ("filament_list", "machine_model_list", "machine_list", "process_list"):
+        for child in data.get(section, []):
+            name_in_vendor = child.get("name")
+            sub_path = child.get("sub_path")
+            if not name_in_vendor or not sub_path:
+                print_error(f"{section} entry without a name/sub_path in {vendor}.json: "
+                            f"{child}")
+                error_count += 1
+                continue
+            sub_file = vendor_dir / sub_path
+            if not sub_file.exists():
+                print_error(f"Missing sub profile: '{sub_path}' declared in {vendor}.json")
+                error_count += 1
+                continue
+            try:
+                sub_data = load_json(sub_file)
+            except (ValueError, OSError) as e:
+                print_error(f"Error loading profile {sub_file.relative_to(profiles_path)}: {e}")
+                error_count += 1
+                continue
+
+            name_in_sub = sub_data.get("name")
+            if name_in_sub == name_in_vendor:
+                continue
+            print_error(f"{section} name mismatch: required '{name_in_vendor}' in "
+                        f"{vendor}.json but found '{name_in_sub}' in "
+                        f"{sub_file.relative_to(profiles_path)}")
+            error_count += 1
+    return error_count, 0
+
+
+def check_index_coverage(profiles_dir, vendor):
+    """Every profile file in a bundle must be listed in its <vendor>.json.
+
+    The mirror of check_name_consistency, which walks the index and looks for the
+    files: this walks the files and looks for them in the index. The loader reads the
+    sub_paths listed there and nothing else, so a file no list names is dead weight
+    that looks live - it sits in the bundle, gets edited and reviewed, and never
+    reaches a single user.
+
+    Returns (errors, gaps), gaps counting the files per REMEDY_HINTS category so
+    the caller can print each remedy once for the whole run instead of once per file.
+    """
+    errors = 0
+    gaps = Counter()
+    vendor_dir = os.path.join(profiles_dir, vendor)
+    try:
+        library = load_json(os.path.join(profiles_dir, vendor + ".json"))
+    except (ValueError, OSError):
+        # A bundle with no readable index at all is check_name_consistency's to
+        # report; calling every file in it unindexed would only bury that.
+        return 0, gaps
+
+    listed = set()
+    for section in PROFILE_TYPES:
+        for entry in library.get(section + "_list", []):
+            if entry.get("sub_path"):
+                # Index entries are hand-written; "filament/./X.json" names the same
+                # file as "filament/X.json" and must not read as unlisted.
+                listed.add(posixpath.normpath(entry["sub_path"].replace("\\", "/")))
+
+    for path, _sub in iter_profile_files(vendor_dir):
+        if os.path.basename(path) in NON_PROFILE_FILES:
+            continue  # data files carry no name or type and are never indexed
+        sub_path = posixpath.normpath(
+            os.path.relpath(path, vendor_dir).replace(os.sep, "/"))
+        if sub_path in listed:
+            continue
+        try:
+            data = load_json(path)
+        except (ValueError, OSError):
+            data = None
+        errors += 1
+        if isinstance(data, dict) and data.get("type") in PROFILE_TYPES:
+            gaps["unindexed"] += 1
+            print_error(f"{vendor}/{sub_path}: no {vendor}.json list references it, so "
+                        f"it never loads")
+        else:
+            gaps["unindexable"] += 1
+            print_error(f"{vendor}/{sub_path}: no {vendor}.json list references it and "
+                        f"it declares no profile type")
+    return errors, gaps
+
+
+def check_filament_id_length(profiles_dir, vendor):
+    """No indexed filament preset may declare a filament_id longer than 8 chars.
+
+    Longer ids break the AMS. Runs for every vendor alike (BBL included: the id
+    format is what matters, not the vendor). Every .json under the bundle's
+    filament directory is still parsed through the duplicate-key hook, so that
+    coverage is unchanged; only the length rule itself is scoped to presets the
+    index (<vendor>.json filament_list) actually references. A file the index does
+    not reference never loads, so its filament_id cannot break anything -- and some
+    vendors (e.g. SeeMeCNC) ship such orphaned files pre-dating this check.
+
+    Returns the error count.
+    """
+    error = 0
+    profiles_path = Path(profiles_dir)
+    vendor_path = profiles_path / vendor / "filament"
+    if not vendor_path.exists():
+        return 0
+
+    referenced = set()
+    vendor_file = profiles_path / (vendor + ".json")
+    if vendor_file.exists():
+        try:
+            index = load_json(vendor_file)
+            for entry in index.get("filament_list", []):
+                sub_path = entry.get("sub_path")
+                if sub_path:
+                    referenced.add((profiles_path / vendor / sub_path).resolve())
+        except (ValueError, OSError) as e:
+            print_error(f"Error loading vendor profile {vendor_file.name}: {e}")
+            error += 1
+
+    for file_path in _vendor_json_files(vendor_path):
+        rel = file_path.relative_to(profiles_path)
+        try:
+            data = load_json(file_path, detect_duplicates=True)
+        except DuplicateKeyError as e:
+            print_error(f"Duplicate key error in {rel}: {e}")
+            error += 1
+            continue
+        except (ValueError, OSError) as e:
+            print_error(f"Error processing {rel}: {e}")
+            error += 1
+            continue
+
+        filament_id = data.get("filament_id")
+        if filament_id and len(filament_id) > 8 and file_path.resolve() in referenced:
+            print_error(f'Filament id too long "{filament_id}": {rel}')
+            error += 1
+    return error
+
+
+def check_obsolete_keys(profiles_dir, vendor):
+    """Warn about settings PrintConfig.cpp explicitly discards. Returns the count."""
+    warn_count = 0
+    profiles_path = Path(profiles_dir)
+    vendor_path = profiles_path / vendor / "filament"
+    if not vendor_path.exists():
+        return 0
+
+    for file_path in _vendor_json_files(vendor_path):
+        rel = file_path.relative_to(profiles_path)
+        try:
+            data = load_json(file_path)
+        except (ValueError, OSError) as e:
+            print_warning(f"Error reading profile {rel}: {e}")
+            warn_count += 1
+            continue
+        for key in data:
+            if key in OBSOLETE_KEYS:
+                print_warning(f"Obsolete key: '{key}' found in {rel}")
+                warn_count += 1
+    return warn_count
+
+
+def check_vector_type_keys(profiles_dir, vendor):
+    """Options the config system stores as vectors must be JSON arrays.
+
+    `filament_type` must be ["PA-CF"], not "PA-CF". Returns the error count.
+    """
+    error_count = 0
+    profiles_path = Path(profiles_dir)
+    vendor_path = profiles_path / vendor
+    if not vendor_path.exists():
+        return 0
+
+    for file_path in _vendor_json_files(vendor_path):
+        rel = file_path.relative_to(profiles_path)
+        try:
+            data = load_json(file_path)
+        except (ValueError, OSError) as e:
+            print_error(f"Error processing {rel}: {e}")
+            error_count += 1
+            continue
+        if not isinstance(data, dict):
+            continue
+        for key in VECTOR_KEYS:
+            if key in data and not isinstance(data[key], list):
+                print_error(f"'{key}' must be an array in {rel}, "
+                            f"got {type(data[key]).__name__}: {data[key]!r}")
+                error_count += 1
+    return error_count
+
+
+def check_conflict_keys(profiles_dir, vendor):
+    """A renamed option and its old spelling must not co-exist in one profile.
+
+    The loader would pick one arbitrarily, and for extruder_clearance_radius vs
+    extruder_clearance_max_radius the wrong pick means a toolhead collision.
+    Returns (errors, warnings).
+    """
+    error_count = 0
+    profiles_path = Path(profiles_dir)
+    vendor_path = profiles_path / vendor
+    if not vendor_path.exists():
+        print_warning(f"No profile directory for vendor: {vendor}")
+        return 0, 1
+
+    for file_path in _vendor_json_files(vendor_path):
+        rel = file_path.relative_to(profiles_path)
+        try:
+            data = load_json(file_path, detect_duplicates=True)
+        except DuplicateKeyError as e:
+            print_error(f"Duplicate key error in {rel}: {e}")
+            error_count += 1
+            continue
+        except (ValueError, OSError) as e:
+            print_error(f"Error processing {rel}: {e}")
+            error_count += 1
+            continue
+        if not isinstance(data, dict):
+            continue
+        for key_set in CONFLICT_KEYS:
+            if sum(1 for k in key_set if k in data) > 1:
+                print_error(f"Conflict keys {key_set} co-exist in {rel}")
+                error_count += 1
+    return error_count, 0
+
+
+def check_normalized(profiles_dir, vendor):
+    """A bundle must already be what normalize and update-index write.
+
+    Those two commands define a profile file's canonical shape - identifying keys
+    first, keys the slicer no longer reads gone, filament options that are vectors
+    written as vectors - and a <vendor>.json's canonical lists, ordered parents-first
+    so the loader resolves every "inherits" in one pass. Running them over a
+    contributed bundle has to be a no-op; where it would not be, the file that was
+    reviewed is not the file that ships, and the next maintainer to run normalize
+    carries an unrelated diff into their own change.
+
+    It asks the normalize and update-index sections below rather than restating what
+    they do, because a second definition of normal is free to drift from the one that
+    writes.
+
+    The index half is skipped when the bundle has a file update-index cannot place, or
+    a preset name two files claim: the index is then unbuildable for a reason
+    check_index_coverage and check_preset_name_uniqueness already report on their own,
+    and "would be rebuilt" stacked on top of that is noise.
+
+    Returns (errors, gaps), gaps counting per REMEDY_HINTS category.
+    """
+    errors = 0
+    gaps = Counter()
+    vendor_dir = os.path.join(profiles_dir, vendor)
+
+    for path, sub in iter_profile_files(vendor_dir):
+        if os.path.basename(path) in NON_PROFILE_FILES:
+            continue  # data files carry no name or type; normalize skips them too
+        try:
+            data = load_json(path)
+        except (ValueError, OSError):
+            continue  # an unreadable file is check_name_consistency's to report
+        if not isinstance(data, dict):
+            continue
+        changes = _normalize_profile(data, sub)
+        if not changes:
+            continue
+        sub_path = os.path.relpath(path, vendor_dir).replace(os.sep, "/")
+        print_error(f"{vendor}/{sub_path}: normalize would {'; '.join(changes)}")
+        errors += 1
+        gaps["unnormalized"] += 1
+
+    try:
+        library = load_json(os.path.join(profiles_dir, vendor + ".json"))
+    except (ValueError, OSError):
+        # A bundle with no readable index has nothing to compare against, and saying so
+        # again here would only bury check_name_consistency's report of it.
+        return errors, gaps
+
+    sections, problems = build_index_sections(profiles_dir, vendor)
+    if sections is None or problems:
+        return errors, gaps
+    stale = sorted(s for s, entries in sections.items() if library.get(s) != entries)
+    if stale:
+        print_error(f"{vendor}.json: update-index would rebuild {', '.join(stale)}")
+        errors += 1
+        gaps["stale_index"] += 1
+    return errors, gaps
+
+
+# ---------------------------------------------------------------------------
+# check
+# ---------------------------------------------------------------------------
+
+def check_profiles(profiles_dir=PROFILES_DIR, vendors=None):
+    """Validate the whole profile tree. Returns the error count.
+
+    The per-vendor checks honour `vendors`; the setting_id and filament_id checks are
+    cross-vendor properties a narrowed run cannot answer, so they always cover the
+    whole tree. With no `vendors`, every bundle is checked except the `user` directory
+    a local validator run leaves behind, being its data dir rather than a bundle;
+    naming it explicitly checks it. OrcaFilamentLibrary is checked like any other
+    bundle, its only exemption being that a library filament may leave
+    compatible_printers empty - what check_filament_compatible_printers applies. The
+    normalization pass takes its own vendor list - see the comment on that loop.
+    """
+    print_info("Checking profiles ...")
+    errors_found = 0
+    warnings_found = 0
+    remedies = Counter()
+
+    if vendors:
+        checked = list(vendors)
+    else:
+        checked = [v for v in list_profile_dirs(profiles_dir) if v != USER_DIR]
+
+    for vendor in checked:
+        errors_found += check_preset_name_uniqueness(profiles_dir, vendor)
+        errors_found += check_filament_compatible_printers(profiles_dir, vendor)
+
+        new_errors, new_warnings = check_machine_default_materials(profiles_dir, vendor)
+        errors_found += new_errors
+        warnings_found += new_warnings
+
+        warnings_found += check_obsolete_keys(profiles_dir, vendor)
+
+        new_errors, new_warnings = check_name_consistency(profiles_dir, vendor)
+        errors_found += new_errors
+        warnings_found += new_warnings
+
+        new_errors, new_warnings = check_conflict_keys(profiles_dir, vendor)
+        errors_found += new_errors
+        warnings_found += new_warnings
+
+        errors_found += check_vector_type_keys(profiles_dir, vendor)
+        errors_found += check_filament_id_length(profiles_dir, vendor)
+
+        new_errors, gaps = check_index_coverage(profiles_dir, vendor)
+        errors_found += new_errors
+        remedies.update(gaps)
+
+    # normalize and update-index judge file and index shape, not the preset-content
+    # rules above, so this pass takes its own vendor list. Unscoped that is the
+    # bundles with an index, exactly what those two commands take; a --vendor is
+    # passed through as given, so a bundle whose index has not landed yet still has
+    # its files held to what normalize writes.
+    for vendor in (vendors or list_vendor_names(profiles_dir)):
+        new_errors, gaps = check_normalized(profiles_dir, vendor)
+        errors_found += new_errors
+        remedies.update(gaps)
+
+    for category, hint in REMEDY_HINTS.items():
+        if remedies[category]:
+            print_warning(f"{remedies[category]} {hint}")
+
+    # Cross-vendor checks: setting_id uniqueness and the whole filament_id state,
+    # both validated over the entire tree regardless of --vendor.
+    errors_found += check_setting_id_uniqueness(profiles_dir)
+    errors_found += check_filament_ids(profiles_dir)
+
+    print("\n==================== SUMMARY ====================")
+    print_info(f"Checked vendors     : {len(checked)}")
+    if errors_found > 0:
+        print_error(f"Files with errors   : {errors_found}")
+    else:
+        print_success("Files with errors   : 0")
+    if warnings_found > 0:
+        print_warning(f"Files with warnings : {warnings_found}")
+    else:
+        print_success("Files with warnings : 0")
+    print("=================================================")
+    if errors_found > 0 or warnings_found > 0:
+        print_warning(f"Issue(s) found, {NORMALIZE_HINT}")
+    return errors_found
+
+
+# ---------------------------------------------------------------------------
+# Byte-preserving profile edits
+# ---------------------------------------------------------------------------
+# Binary IO throughout: a profile keeps its original line endings (LF or CRLF),
+# its BOM and its exact formatting apart from the one line being touched.
+
+def insert_key_line(text, key, value, before=(), after=()):
+    """Insert a `"key": value` line into a preset that lacks one.
+
+    Placed just before the first `before` anchor the file has (matching the
+    canonical key order), else just after the first `after` anchor, reusing that
+    anchor line's indentation and line ending. Returns (text, insertions made).
+    """
+    def line(m):
+        return (f'{m.group(1)}"{key}": {json.dumps(value, ensure_ascii=False)},'
+                f'{m.group(2)}')
+
+    for anchors, at_start in ((before, True), (after, False)):
+        for anchor in anchors:
+            m = re.search(r'^([ \t]*)"' + re.escape(anchor) + r'"[ \t]*:.*?(\r?\n)',
+                          text, re.MULTILINE)
+            if m:
+                cut = m.start() if at_start else m.end()
+                return text[:cut] + line(m) + text[cut:], 1
+    return text, 0
+
+
+def replace_key_value(text, key, new_value, old_value=None):
+    """Swap the JSON string VALUE on the `"key"` line, byte-preserving the rest.
+
+    When old_value is given the line must carry exactly that value, so a stale
+    rewrite fails loudly instead of clobbering an unexpected id.
+    Returns (text, replacements made).
+    """
+    value = (re.escape(json.dumps(old_value, ensure_ascii=False))
+             if old_value is not None else _JSON_STR)
+    pattern = re.compile(
+        r'(^[ \t]*"' + re.escape(key) + r'"[ \t]*:[ \t]*)' + value, re.MULTILINE)
+    return pattern.subn(
+        lambda m: m.group(1) + json.dumps(new_value, ensure_ascii=False), text, count=1)
+
+
+def delete_key_line(text, key, old_value=None):
+    """Delete the `"key"` line, byte-preserving the rest.
+
+    Handles both the canonical layout (trailing comma) and a last-property
+    layout (comma on the preceding line, consumed so no dangling comma is left).
+    Returns (text, deletions made).
+    """
+    value = (re.escape(json.dumps(old_value, ensure_ascii=False))
+             if old_value is not None else _JSON_STR)
+    member = r'"' + re.escape(key) + r'"[ \t]*:[ \t]*' + value
+    m = re.search(r'^[ \t]*' + member + r'[ \t]*,[ \t]*\r?\n', text, re.MULTILINE)
+    if m:
+        return text[:m.start()] + text[m.end():], 1
+    m = re.search(r',[ \t]*\r?\n[ \t]*' + member + r'[ \t]*(?=\r?\n)', text)
+    if m:
+        return text[:m.start()] + text[m.end():], 1
+    return text, 0
+
+
+def insert_filament_id(text, new_id):
+    """Insert a `"filament_id"` line before `instantiation`, else after `name`."""
+    return insert_key_line(text, "filament_id", new_id,
+                           before=("instantiation",), after=("name",))
+
+
+def replace_filament_id_value(text, old_id, new_id):
+    """Swap the value on the `"filament_id"` line; it must carry old_id."""
+    return replace_key_value(text, "filament_id", new_id, old_value=old_id)
+
+
+def insert_setting_id(text, new_id):
+    """Insert a `"setting_id"` line before `filament_id`, else `instantiation`.
+
+    Falls back to `name` — the one key every preset has — so the anchor does not
+    depend on whether filament_id has been written yet: a dry run, which does not
+    write it, must reach the same verdict as the real run that does.
+    """
+    return insert_key_line(text, "setting_id", new_id,
+                           before=("filament_id", "instantiation"), after=("name",))
+
+
+def _edit_profile(path, edit, dry_run=False, what="edit"):
+    """Apply `edit(text) -> (text, n)` to the profile at path, byte-preserving.
+
+    The result is re-parsed and returned so the caller can verify the outcome —
+    in a dry run too, where only the write itself is skipped. Raises when the
+    edit found no anchor or produced invalid JSON.
+    """
+    with open(path, "rb") as f:
+        raw = f.read()
+    bom = raw.startswith(b"\xef\xbb\xbf")
+    text = raw.decode("utf-8-sig")
+    text, n = edit(text)
+    if n == 0:
+        raise RuntimeError(f"could not apply {what} to {path}")
+    try:
+        data = json.loads(text)  # fail loudly if the edit broke the JSON
+    except ValueError as e:
+        raise RuntimeError(f"{what} broke the JSON in {path}: {e}") from None
+    if not dry_run:
+        with open(path, "wb") as f:
+            f.write((b"\xef\xbb\xbf" if bom else b"") + text.encode("utf-8"))
+    return data
+
+
+def write_filament_id(path, new_id, dry_run=False):
+    """Insert new_id into the profile at path, byte-preserving everything else."""
+    _edit_profile(path, lambda text: insert_filament_id(text, new_id),
+                  dry_run, "filament_id insert")
+
+
+def rewrite_filament_id(path, old_id, new_id, dry_run=False):
+    """Replace the filament_id value old_id -> new_id; re-parses to verify."""
+    data = _edit_profile(path, lambda text: replace_filament_id_value(text, old_id, new_id),
+                         dry_run, "filament_id rewrite")
+    if data.get("filament_id") != new_id:
+        raise RuntimeError(f'rewrite of filament_id "{old_id}" -> "{new_id}" in {path} '
+                           f"did not take effect")
+
+
+# ---------------------------------------------------------------------------
+# generate-id
+# ---------------------------------------------------------------------------
+
+def _incomplete_triple(triple):
+    """The name(s) of the empty mint-key fields, or "" when both are present."""
+    return " and ".join(k for k, v in (("filament_vendor", triple[0]),
+                                       ("filament_type", triple[1])) if not v)
+
+
+def generate_filament_ids(profiles_dir=PROFILES_DIR, vendors=None, dry_run=False,
+                          changed_paths=None):
+    """Make every filament carry the id its own triple mints.
+
+    One rule, applied to declarations and to id-less filaments alike:
+      * a declared id that is not the one its own triple mints — a wrong OF id,
+        or a foreign one such as a Bambu catalog id arriving with an upstream
+        sync — is replaced in place;
+      * an instantiated filament that resolves no id at all gets one inserted
+        into its root(s): the id-less presets of the SAME filament its members
+        inherit, or the member itself (a parent of another filament cannot carry
+        this filament's id — check 2).
+    A declaration is left alone exactly when it already equals the one id its
+    triple mints (check 2). Two products minting one id (check 2d) are reported
+    and left unwritten: nothing salts past a collision, a rename resolves it.
+
+    `vendors` restricts what is WRITTEN; the id is a function of the triple
+    alone, so a narrowed run writes exactly what a full one would, and --check
+    reports whatever it was not allowed to touch. `changed_paths`, when a set is
+    passed, collects the files that changed. A file whose layout offers no
+    anchor for the edit is reported and counted as an error, so one odd profile
+    cannot abort the pass over all the others. Returns (files_changed, errors).
+    """
+    _utf8_console()
+    analysis = analyze_tree(profiles_dir)
+    errors = 0
+    for msg in analysis["read_errors"]:
+        print_error(msg)
+        errors += 1
+    wanted = None
+    if vendors is not None:
+        wanted = set(vendors)
+        # A vendor directory without a bundle index simply has no filaments to
+        # process; only a name that is no directory at all is an error.
+        unknown = sorted(wanted - set(list_profile_dirs(profiles_dir)))
+        if unknown:
+            for v in unknown:
+                print_error(f'unknown vendor "{v}" in {profiles_dir}')
+            return 0, errors + len(unknown)
+
+    colliding = set()  # triples no run may write an id for
+    for fid, ts in sorted(analysis["collisions"].items()):
+        print_error(
+            f'cannot write filament_id "{fid}": it is the mint of {len(ts)} different '
+            f'products ({"; ".join("/".join(t) for t in ts)}), a base62 collision; '
+            f"rename one of them so their triples differ")
+        errors += 1
+        colliding.update(ts)
+
+    verb = "would " if dry_run else ""
+    files_changed = 0
+    reminted = 0
+    inserted = 0
+
+    # 1. Declarations that are not the mint of their own triple.
+    for vendor, rec, fid, triple in sorted(
+            analysis["declarer_triples"], key=lambda x: (x[0], x[1]["file"])):
+        want = generate_filament_id(*triple)
+        if (fid == want or (wanted is not None and vendor not in wanted)
+                or triple in colliding):
+            continue
+        missing = _incomplete_triple(triple)
+        if missing:
+            print_error(
+                f'cannot re-mint "{rec["file"]}" (filament_id "{fid}"): resolves empty '
+                f'{missing}; the mint key needs both (generic materials use '
+                f'filament_vendor "Generic")')
+            errors += 1
+            continue
+        try:
+            rewrite_filament_id(rec["path"], fid, want, dry_run)
+        except (OSError, RuntimeError, ValueError) as e:
+            print_error(str(e))
+            errors += 1
+            continue
+        files_changed += 1
+        reminted += 1
+        if changed_paths is not None:
+            # Index sub_paths are "/"-joined even on Windows, where the
+            # setting_id pass reaches the same file through os.walk: normalize
+            # or one file touched by both passes counts as two.
+            changed_paths.add(os.path.normpath(rec["path"]))
+        print_info(f'{verb}rewrite {rec["file"]}: "{fid}" -> "{want}" '
+                   f'(triple "{"/".join(triple)}")')
+
+    # 2. Instantiated filaments that resolve no id at all, grouped by filament.
+    filaments = {}  # (vendor, filament name) -> [rec]
+    for vendor, name, _file in analysis["missing_effective"]:
+        if wanted is not None and vendor not in wanted:
+            continue
+        rec = analysis["vendors"][vendor][name]
+        if rec["id_source"] in ("cycle", "dangling"):
+            print_error(f'cannot mint for "{vendor}/{name}": broken inherits chain '
+                        f'({rec["id_source"]})')
+            errors += 1
+            continue
+        filaments.setdefault((vendor, base_name(name)), []).append(rec)
+
+    ofl_map = analysis["vendors"].get(OFL, {})
+    for (vendor, filament_name), members in sorted(filaments.items()):
+        vendor_map = analysis["vendors"][vendor]
+        # Root preset(s): the direct vendor-side parents of the members (id-less
+        # by construction) that belong to the same filament, or the member itself.
+        roots = {}
+        for rec in members:
+            parent = rec.get("inherits")
+            root = vendor_map.get(parent) if parent else None
+            if (root is None or root.get("filament_id")
+                    or base_name(root["name"]) != filament_name):
+                root = rec  # root-less member carries the id itself
+            roots[root["name"]] = root
+        fields = {(resolve_filament_field(n, "filament_vendor", vendor_map, ofl_map),
+                   resolve_filament_field(n, "filament_type", vendor_map, ofl_map))
+                  for n in roots}
+        if len(fields) > 1:
+            print_error(
+                f'cannot mint for filament "{vendor}/{filament_name}": its roots resolve '
+                f"divergent (filament_vendor, filament_type) pairs {sorted(fields)}; "
+                f"align the fields first")
+            errors += 1
+            continue
+        triple = (*next(iter(fields)), filament_name)
+        if triple in colliding:
+            continue  # reported above
+        missing = _incomplete_triple(triple)
+        if missing:
+            print_error(
+                f'cannot mint for filament "{vendor}/{filament_name}": it resolves empty '
+                f'{missing}; the mint key needs both (generic materials use '
+                f'filament_vendor "Generic")')
+            errors += 1
+            continue
+        new_id = generate_filament_id(*triple)
+        for name in sorted(roots):
+            root = roots[name]
+            try:
+                write_filament_id(root["path"], new_id, dry_run)
+            except (OSError, RuntimeError, ValueError) as e:
+                print_error(str(e))
+                errors += 1
+                continue
+            files_changed += 1
+            inserted += 1
+            if changed_paths is not None:
+                changed_paths.add(os.path.normpath(root["path"]))
+            print_info(f'{verb}insert filament "{vendor}/{filament_name}": filament_id '
+                       f'"{new_id}" -> {root["file"]}')
+
+    print_info(f"filament_ids inserted  : {inserted}")
+    print_info(f"filament_ids re-minted : {reminted}")
+    return files_changed, errors
+
+
+def generate_setting_ids(profiles_dir=PROFILES_DIR, vendors=None, dry_run=False,
+                         changed_paths=None):
+    """Make every preset carry the setting_id its identity mints.
+
+    One walk over filament/, process/ and machine/ of every vendor bundle, and
+    one composite edit per file: drop the misspelled "settings_id" key (the app
+    never reads it), strip setting_id from base profiles (only instantiated
+    presets carry one), and set generate_preset_setting_id(vendor, type, name) on
+    instantiated presets — except BBL's, which keep their authoritative "G*"
+    cloud ids. `changed_paths`, when a set is passed, collects the files that
+    changed. Returns (files_changed, errors).
+    """
+    _utf8_console()
+    profiles_dir = str(profiles_dir)
+    errors = 0
+    names = list_profile_dirs(profiles_dir)
+    if vendors is not None:
+        wanted = set(vendors)
+        unknown = sorted(wanted - set(names))
+        if unknown:
+            for v in unknown:
+                print_error(f'unknown vendor "{v}" in {profiles_dir}')
+            return 0, len(unknown)
+        names = [v for v in names if v in wanted]
+        for v in sorted(wanted & RESERVED_VENDORS):
+            print_info(f'{v} keeps its authoritative "G*" setting_ids; only its base '
+                       f"declarations are stripped")
+
+    verb = "would " if dry_run else ""
+    files_changed = 0
+    counts = {"typos": 0, "stripped": 0, "assigned": 0}
+    for vendor in names:
+        for path, type_name in iter_profile_files(os.path.join(profiles_dir, vendor)):
+            try:
+                with open(path, "rb") as f:
+                    data = json.loads(f.read().decode("utf-8-sig"))
+                if not isinstance(data, dict):
+                    raise ValueError("top level is not a JSON object")
+            except (OSError, ValueError) as e:
+                print_error(f"unreadable profile {path}: {e}")
+                errors += 1
+                continue
+
+            sid = data.get("setting_id")
+            # Strictly "true", exactly as check_setting_id_uniqueness tests it:
+            # a preset the validator calls a base profile must not be given an id
+            # here, or the two would fight over it forever.
+            instantiated = data.get("instantiation") == "true"
+            edits = []  # (counter key, description, edit function)
+            if "settings_id" in data:
+                edits.append(("typos", 'drop the misspelled "settings_id"',
+                              lambda text: delete_key_line(text, "settings_id")))
+                typo = data["settings_id"]
+                if (vendor in RESERVED_VENDORS and instantiated and sid is None
+                        and isinstance(typo, str) and typo):
+                    # A reserved vendor's ids are authoritative, so there is no
+                    # formula to fall back on: correct the key and keep the
+                    # value, or the drop would leave an instantiated preset with
+                    # no setting_id and nothing able to give it one.
+                    edits.append(("assigned", 'restore its value as "setting_id"',
+                                  lambda text, new=typo: insert_setting_id(text, new)))
+            if not instantiated:
+                if sid is not None:
+                    edits.append(("stripped", "strip the base profile's setting_id",
+                                  lambda text, old=sid: delete_key_line(
+                                      text, "setting_id", old)))
+            elif vendor not in RESERVED_VENDORS:
+                name = data.get("name")
+                if not name:
+                    # Report and carry on: an edit already queued for this file
+                    # (a misspelled key) is still worth applying.
+                    print_error(f'instantiated preset has no "name": {path}')
+                    errors += 1
+                else:
+                    new_id = generate_preset_setting_id(vendor, type_name, name)
+                    if sid is None:
+                        edits.append(("assigned", "insert the setting_id",
+                                      lambda text, new=new_id: insert_setting_id(text, new)))
+                    elif sid != new_id:
+                        edits.append(("assigned", "replace the setting_id",
+                                      lambda text, new=new_id, old=sid: replace_key_value(
+                                          text, "setting_id", new, old)))
+            if not edits:
+                continue
+
+            def apply(text, _edits=edits, _path=path):
+                for _key, what, edit in _edits:
+                    text, n = edit(text)
+                    if n == 0:
+                        raise RuntimeError(f"could not {what} in {_path}")
+                return text, len(_edits)
+
+            try:
+                _edit_profile(path, apply, dry_run)
+            except (OSError, RuntimeError, ValueError) as e:
+                print_error(str(e))
+                errors += 1
+                continue
+            files_changed += 1
+            if changed_paths is not None:
+                changed_paths.add(os.path.normpath(path))
+            for key, _what, _edit in edits:
+                counts[key] += 1
+            rel = os.path.relpath(path, profiles_dir).replace(os.sep, "/")
+            print_info(f"{verb}update {rel}: "
+                       f"{', '.join(what for _key, what, _edit in edits)}")
+
+    print_info(f'misspelled "settings_id" dropped : {counts["typos"]}')
+    print_info(f'base setting_ids stripped        : {counts["stripped"]}')
+    print_info(f'setting_ids assigned             : {counts["assigned"]}')
+    return files_changed, errors
+
+
+def run_generate_id(profiles_dir, vendors, filament_id, setting_id, dry_run):
+    """The generate-id command: write the ids the tree's identities imply.
+
+    Returns the process exit code.
+    """
+    # Both by default. filament_id runs first so its keys are in place before the
+    # setting_id pass reads the files back.
+    do_filament = filament_id or not setting_id
+    do_setting = setting_id or not filament_id
+    changed = set()  # one file the two passes both touch is still one file
+    errors = 0
+    if do_filament:
+        _n, e = generate_filament_ids(profiles_dir, vendors, dry_run, changed)
+        errors += e
+    if do_setting:
+        _n, e = generate_setting_ids(profiles_dir, vendors, dry_run, changed)
+        errors += e
+
+    summary = (f"dry run: {len(changed)} file(s) would change; nothing written"
+               if dry_run else f"{len(changed)} file(s) changed")
+    if errors:
+        print_error(f"{summary}; {errors} error(s)")
+    else:
+        print_success(summary)
+    return 1 if errors else 0
+
+
+
+# ---------------------------------------------------------------------------
+# Whole-file profile writes (normalize / update-index)
+# ---------------------------------------------------------------------------
+# Unlike the byte-preserving id edits above, these reserialise a whole file: they
+# reorder keys and normalize formatting by design.
+
+def _rel(path, profiles_dir):
+    """Tree-relative, forward-slashed path - what every message below prints."""
+    return os.path.relpath(path, profiles_dir).replace(os.sep, "/")
+
+
+def _walk_json(directory):
+    """Every .json file under a directory, in a deterministic order."""
+    for root, dirs, files in os.walk(directory):
+        dirs.sort()
+        for name in sorted(files):
+            if name.lower().endswith(".json"):
+                yield os.path.join(root, name)
+
+
+def _profile_subdir(profile_type):
+    """The directory a profile type lives in: Orca keeps machine models in machine/."""
+    return "machine" if profile_type == "machine_model" else profile_type
+
+
+def write_profile_json(path, data):
+    """Reserialise a profile file: tab-indented, LF endings, trailing newline.
+
+    newline="\\n" is not cosmetic: without it Python translates to os.linesep, so a
+    normalize run on Windows would rewrite every file it touches with CRLF endings.
+    """
+    with open(path, "w", encoding="utf-8", newline="\n") as f:
+        json.dump(data, f, indent="\t", ensure_ascii=False)
+        f.write("\n")
+
+
+def create_ordered_profile(profile, priority_fields):
+    """`profile` with priority_fields hoisted to the front, in that order."""
+    ordered = {k: profile[k] for k in priority_fields if k in profile}
+    ordered.update((k, v) for k, v in profile.items() if k not in priority_fields)
+    return ordered
+
+
+# ---------------------------------------------------------------------------
+# normalize
+# ---------------------------------------------------------------------------
+
+# The keys that identify a preset, hoisted to the top of every rewritten file.
+NORMALIZE_FIELD_ORDER = ("type", "name", "renamed_from", "inherits", "from",
+                   "setting_id", "filament_id", "instantiation")
+# Settings a filament profile must not pin: they belong to the process.
+FILAMENT_DROP_FIELDS = ("initial_layer_print_speed", "outer_wall_speed",
+                        "inner_wall_speed", "infill_speed", "top_surface_speed",
+                        "travel_speed")
+# Filament options the config system stores as vectors, written as scalars by hand.
+FILAMENT_ARRAY_FIELDS = ("filament_cost", "filament_density", "filament_type",
+                         "temperature_vitrification", "filament_max_volumetric_speed",
+                         "filament_vendor")
+
+
+def _normalize_profile(data, sub):
+    """Normalize one loaded profile in place. Returns what it changed, one line each.
+
+    It reports rather than prints because check asks this function the same question
+    normalize does - would this file be rewritten? - and has to render the answer as
+    errors rather than as the running commentary of a write.
+    """
+    changes = []
+
+    if not data.get("type"):
+        if sub == "machine":
+            # The machine folder holds both machine models and the nozzle variants
+            # that are machines; the name is what tells them apart.
+            name = data.get("name") or ""
+            data["type"] = "machine" if "nozzle" in name.lower() else "machine_model"
+        else:
+            data["type"] = sub
+        changes.append(f'add type "{data["type"]}"')
+
+    for field in ("version", "is_custom_defined"):
+        if data.get(field):
+            del data[field]
+            changes.append(f"remove {field}")
+
+    for field in sorted(OBSOLETE_KEYS.intersection(data)):
+        del data[field]
+        changes.append(f"remove {field}")
+
+    # BBS renamed extruder_clearance_radius to extruder_clearance_max_radius, but some
+    # profiles carry both with different values, and the slicer cannot tell which one
+    # to obey - a toolhead collision waiting to happen. Keep the larger one only.
+    if "extruder_clearance_radius" in data and "extruder_clearance_max_radius" in data:
+        drop = ("extruder_clearance_radius"
+                if float(data["extruder_clearance_max_radius"])
+                > float(data["extruder_clearance_radius"])
+                else "extruder_clearance_max_radius")
+        del data[drop]
+        changes.append(f"drop conflicting {drop}")
+
+    if sub == "filament":
+        for field in FILAMENT_ARRAY_FIELDS:
+            if field in data and not isinstance(data[field], list):
+                data[field] = [data[field]]
+                changes.append(f"convert {field} to an array")
+        for field in FILAMENT_DROP_FIELDS:
+            if field in data:
+                del data[field]
+                changes.append(f"remove {field}")
+
+    return changes
+
+
+def normalize_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None,
+                 force=False, dry_run=False):
+    """Normalize profile files in place. Returns (files changed, errors).
+
+    Adds a missing "type", drops keys the slicer no longer reads, resolves the
+    extruder_clearance_* conflict, arrayifies the filament options that are vectors,
+    and rewrites the file with its identifying keys first.
+    """
+    vendors = vendors or list_vendor_names(profiles_dir)
+    # Both machine_model and machine live in machine/, so the same directory is never
+    # walked twice; what a file becomes is decided per file, from its name.
+    subs = list(dict.fromkeys(_profile_subdir(t) for t in (profile_types or PROFILE_TYPES)))
+    changed_files = errors = 0
+    for vendor in vendors:
+        for sub in subs:
+            for path in _walk_json(os.path.join(profiles_dir, vendor, sub)):
+                if os.path.basename(path) in NON_PROFILE_FILES:
+                    continue
+                rel = _rel(path, profiles_dir)
+                try:
+                    data = load_json(path)
+                except (ValueError, OSError) as e:
+                    print_error(f"{rel}: {e}")
+                    errors += 1
+                    continue
+                if not isinstance(data, dict):
+                    continue
+                changes = _normalize_profile(data, sub)
+                for change in changes:
+                    print_info(f"{rel}: {change}")
+                if not changes and not force:
+                    continue
+                changed_files += 1
+                if dry_run:
+                    print_info(f"{rel}: would be rewritten")
+                    continue
+                try:
+                    write_profile_json(
+                        path, create_ordered_profile(data, NORMALIZE_FIELD_ORDER))
+                except OSError as e:
+                    print_error(f"{rel}: {e}")
+                    errors += 1
+                    continue
+                print_info(f"{rel}: rewritten")
+
+    verb = "would be normalized" if dry_run else "normalized"
+    print_success(f"{changed_files} profile(s) {verb}")
+    return changed_files, errors
+
+
+# ---------------------------------------------------------------------------
+# trim
+# ---------------------------------------------------------------------------
+
+def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None,
+                  dry_run=False):
+    """Delete profile files that a vendor's <vendor>.json does not index.
+
+    The loader only ever reads the sub_paths listed in <vendor>.json, so a profile
+    file missing from every *_list never loads. Only recognisable presets are
+    considered: assets (cover images, bed models, bed textures) are referenced from
+    inside machine profiles rather than from the index, and data files such as
+    cli_config.json carry no "type" - all of them stay. A file that cannot be parsed
+    is reported and kept: never delete what could not be read.
+
+    An unindexed file that some surviving profile names in "inherits" is kept too,
+    and reported, UNLESS an indexed profile already carries that name: "inherits" is
+    resolved by preset name, so the indexed one is the parent every child actually
+    gets, and the unindexed file is a stale copy the loader never reaches. Where no
+    indexed profile provides the name the inheriting preset really is broken, and
+    deleting the file would destroy the only record of the settings it was written
+    against - a repair job for a maintainer, not for this.
+
+    Returns (files removed, errors).
+    """
+    vendors = vendors or list_vendor_names(profiles_dir)
+    subs = list(dict.fromkeys(_profile_subdir(t) for t in (profile_types or PROFILE_TYPES)))
+
+    total = errors = 0
+    for vendor in vendors:
+        vendor_dir = os.path.join(profiles_dir, vendor)
+        try:
+            library = load_json(os.path.join(profiles_dir, vendor + ".json"))
+        except (ValueError, OSError) as e:
+            print_error(f"{vendor}.json: {e}")
+            errors += 1
+            continue
+
+        # A profile may be indexed under any of the lists whichever folder it sits
+        # in, so the whole index is collected before anything is judged unreferenced.
+        listed = set()
+        for section in PROFILE_TYPES:
+            for entry in library.get(section + "_list", []):
+                sub_path = entry.get("sub_path")
+                if sub_path:
+                    # Index entries are hand-written; "filament/./X.json" names the
+                    # same file as "filament/X.json" and must not read as an orphan.
+                    listed.add(posixpath.normpath(sub_path.replace("\\", "/")))
+
+        candidates = {}    # path -> profile, for every unindexed preset
+        inherited = set()  # every name the files that stay claim as a parent
+        provided = {}      # name -> sub_path, for the profiles the loader can see
+        for sub in subs:
+            for path in _walk_json(os.path.join(vendor_dir, sub)):
+                rel = _rel(path, profiles_dir)
+                sub_path = posixpath.normpath(
+                    os.path.relpath(path, vendor_dir).replace(os.sep, "/"))
+                try:
+                    profile = load_json(path)
+                except (ValueError, OSError) as e:
+                    print_warning(f"{rel}: {e}; keeping it")
+                    continue
+                if not isinstance(profile, dict):
+                    continue
+                if sub_path in listed or profile.get("type") not in PROFILE_TYPES:
+                    if profile.get("inherits"):
+                        inherited.add(profile["inherits"])
+                    if sub_path in listed and profile.get("name"):
+                        provided[profile["name"]] = sub_path
+                    continue
+                candidates[path] = profile
+
+        # An orphan kept for being inherited can itself keep its own parent alive, so
+        # the survivors are grown to a fixpoint before anything is deleted. A kept
+        # orphan never enters "provided": it does not load, so it cannot be the parent
+        # a child resolves to, and its own parent needs rescuing on the same terms.
+        kept = {}
+        while True:
+            rescued = {p: d for p, d in candidates.items()
+                       if d.get("name") in inherited and d.get("name") not in provided}
+            if not rescued:
+                break
+            for path, profile in rescued.items():
+                del candidates[path]
+                kept[path] = profile
+                if profile.get("inherits"):
+                    inherited.add(profile["inherits"])
+
+        for path in sorted(kept):
+            print_warning(f"{_rel(path, profiles_dir)}: not indexed by {vendor}.json but "
+                          f'inherited from; keeping it (neither loads - fix the index)')
+
+        removed = 0
+        for path in sorted(candidates):
+            rel = _rel(path, profiles_dir)
+            twin = provided.get(candidates[path].get("name"))
+            why = f", not indexed by {vendor}.json"
+            if twin:
+                why += f' ({twin} is the profile named "{candidates[path]["name"]}")'
+            if dry_run:
+                print_info(f"{rel}: would be removed{why}")
+            else:
+                try:
+                    os.remove(path)
+                except OSError as e:
+                    print_error(f"{rel}: {e}")
+                    errors += 1
+                    continue
+                print_info(f"{rel}: removed{why}")
+            removed += 1
+        if removed:
+            print_info(f"{vendor}: {removed} unreferenced profile(s)")
+        total += removed
+
+    verb = "would be removed" if dry_run else "removed"
+    print_success(f"{total} unreferenced profile(s) {verb}")
+    return total, errors
+
+
+# ---------------------------------------------------------------------------
+# update-index
+# ---------------------------------------------------------------------------
+
+def topological_sort(profiles):
+    """Order index entries parents-first, so the loader resolves inherits in one pass.
+
+    Entries whose parent is not in the same section keep their own (sorted) order at
+    the end; the loader finds those parents through the base bundle instead.
+    """
+    graph = defaultdict(list)
+    in_degree = defaultdict(int)
+    by_name = {p["name"]: p for p in profiles}
+    all_names = set(by_name)
+
+    placed = set()
+    for profile in profiles:
+        parent = profile.get("inherits")
+        child = profile["name"]
+        if parent in all_names:
+            graph[parent].append(child)
+            in_degree[child] += 1
+            in_degree.setdefault(parent, 0)
+            placed.add(child)
+            placed.add(parent)
+
+    queue = sorted(name for name, degree in in_degree.items() if degree == 0)
+    result = []
+    while queue:
+        current = queue.pop(0)
+        result.append(by_name[current])
+        placed.add(current)
+        for child in sorted(graph[current]):
+            in_degree[child] -= 1
+            if in_degree[child] == 0:
+                queue.append(child)
+
+    result.extend(by_name[name] for name in sorted(all_names - placed))
+    return result
+
+
+def build_index_sections(profiles_dir, vendor, profile_types=None):
+    """The *_list sections update-index would write for one bundle, from its own files.
+
+    A profile is indexed under the section its own "type" names, so a file whose type
+    is missing or unrecognised cannot be placed - run normalize first, which is what
+    writes the type.
+
+    Returns (sections, problems). `problems` names every file that could not be placed,
+    one message each, for the caller to report. `sections` is None when two files claim
+    one preset name: the bundle can only hold one profile under a name, so rebuilding
+    would pick a winner by directory order and quietly drop the other, and the index has
+    to be left alone instead. Identify the intended preset and delete or rename the
+    duplicate before retrying. Use trim only for deliberate unindexed-file cleanup,
+    previewed with --dry-run.
+    """
+    vendor_dir = os.path.join(profiles_dir, vendor)
+    sections = {}
+    problems = []
+    unplaceable = {}
+    by_name = defaultdict(list)
+    for profile_type in (profile_types or PROFILE_TYPES):
+        entries = []
+        for path in _walk_json(os.path.join(vendor_dir, _profile_subdir(profile_type))):
+            if os.path.basename(path) in NON_PROFILE_FILES:
+                continue
+            rel = _rel(path, profiles_dir)
+            try:
+                profile = load_json(path)
+            except (ValueError, OSError) as e:
+                problems.append(f"{rel}: {e}")
+                continue
+            if not isinstance(profile, dict):
+                continue
+            if profile.get("type") not in PROFILE_TYPES:
+                unplaceable[rel] = profile.get("type")
+                continue
+            if profile.get("type") != profile_type:
+                continue
+            name = profile.get("name")
+            if not name:
+                problems.append(f"{rel}: no name, cannot be indexed")
+                continue
+            entry = {
+                "name": name,
+                "sub_path": os.path.relpath(path, vendor_dir).replace(os.sep, "/"),
+            }
+            if profile.get("inherits"):
+                entry["inherits"] = profile["inherits"]
+            by_name[name].append(entry["sub_path"])
+            entries.append(entry)
+
+        sorted_entries = topological_sort(entries)
+        for entry in sorted_entries:
+            entry.pop("inherits", None)  # ordering input only, not part of the index
+        sections[profile_type + "_list"] = sorted_entries
+
+    for rel, found in sorted(unplaceable.items()):
+        problems.append(f'{rel}: type {found!r} is not one of {list(PROFILE_TYPES)}, so it '
+                        f"cannot be indexed; run "
+                        f'"python scripts/orca_profile_tool.py normalize" first')
+
+    clashes = {name: subs for name, subs in by_name.items() if len(subs) > 1}
+    for name, subs in sorted(clashes.items()):
+        problems.append(f'{vendor}.json: {len(subs)} profiles are named "{name}" '
+                        f'({", ".join(sorted(subs))}); only one can be indexed under '
+                        f"that name, so delete or rename the others - "
+                        f"preview unindexed-file cleanup with "
+                        f'"python scripts/orca_profile_tool.py trim --dry-run"')
+
+    return (None if clashes else sections), problems
+
+
+def update_profile_indexes(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None,
+                           dry_run=False):
+    """Rebuild the *_list sections of each <vendor>.json from the files on disk.
+
+    Returns (indexes changed, errors). See build_index_sections for what a file has to
+    carry to be placed, and for when a bundle is left alone instead.
+    """
+    vendors = vendors or list_vendor_names(profiles_dir)
+    changed = errors = 0
+    for vendor in vendors:
+        lib_path = os.path.join(profiles_dir, vendor + ".json")
+        try:
+            library = load_json(lib_path)
+        except (ValueError, OSError) as e:
+            print_error(f"{vendor}.json: {e}")
+            errors += 1
+            continue
+
+        sections, problems = build_index_sections(profiles_dir, vendor, profile_types)
+        for problem in problems:
+            print_error(problem)
+        errors += len(problems)
+        if sections is None:
+            print_error(f"{vendor}.json: left unchanged, it would have dropped a profile")
+            continue
+
+        if all(library.get(section) == entries for section, entries in sections.items()):
+            continue
+        changed += 1
+        if dry_run:
+            print_info(f"{vendor}.json: {', '.join(sorted(sections))} would be rebuilt")
+            continue
+        library.update(sections)
+        try:
+            write_profile_json(lib_path, library)
+        except OSError as e:
+            print_error(f"{vendor}.json: {e}")
+            errors += 1
+            continue
+        print_info(f"{vendor}.json: {', '.join(sorted(sections))} rebuilt")
+
+    verb = "would be rebuilt" if dry_run else "rebuilt"
+    print_success(f"{changed} vendor index(es) {verb}")
+    return changed, errors
+
+
+# ---------------------------------------------------------------------------
+# CLI
+# ---------------------------------------------------------------------------
+
+EXAMPLES = """\
+examples:
+  orca_profile_tool.py check
+      validate the whole tree, exactly as CI does
+  orca_profile_tool.py check --vendor Creality
+      the per-vendor checks for one bundle; setting_id and filament_id are
+      cross-vendor properties, so those two always cover the whole tree
+  orca_profile_tool.py generate-id
+      give every profile the id its identity mints, in every vendor bundle
+  orca_profile_tool.py generate-id --dry-run
+      preview exactly that; writes nothing
+  orca_profile_tool.py generate-id --setting-id --vendor Elegoo
+      setting_id only, and only in that bundle
+
+after adding, renaming or deleting profile files, run in this order:
+  normalize -> update-index -> generate-id -> check
+normalize supplies missing types; update-index registers presets before id
+generation.
+Use trim only for deliberate cleanup, previewed with --dry-run: it judges against
+the current index and can delete newly added, unindexed presets.
+"""
+
+
+def build_parser():
+    # Shared options, attached with parents=[...] so every command spells them the
+    # same way and documents them once.
+    profiles_opt = argparse.ArgumentParser(add_help=False)
+    profiles_opt.add_argument("--profiles", default=PROFILES_DIR, metavar="DIR",
+                              help="profiles directory (default: resources/profiles)")
+
+    vendor_opt = argparse.ArgumentParser(add_help=False)
+    vendor_opt.add_argument("--vendor", metavar="VENDOR", action="append", default=[],
+                            help="act on this vendor bundle only; repeatable. "
+                                 "An empty value means every vendor")
+
+    type_opt = argparse.ArgumentParser(add_help=False)
+    type_opt.add_argument("--profile-type", metavar="TYPE", action="append", default=[],
+                          choices=PROFILE_TYPES, dest="profile_type",
+                          help="act on this profile type only; repeatable. One of: "
+                               + ", ".join(PROFILE_TYPES))
+
+    dry_run_opt = argparse.ArgumentParser(add_help=False)
+    dry_run_opt.add_argument("--dry-run", "--dryrun", dest="dry_run", action="store_true",
+                             help="report what would change and write nothing")
+
+    parser = argparse.ArgumentParser(
+        prog="orca_profile_tool.py", allow_abbrev=False,
+        formatter_class=argparse.RawDescriptionHelpFormatter,
+        description="Every maintenance job for the OrcaSlicer system profile tree.\n"
+                    "\n"
+                    "The ids it writes are pure functions of the profile's own\n"
+                    "identity, so it never invents one: it writes the id the rules\n"
+                    "already imply, and leaves a conforming tree alone.",
+        epilog=EXAMPLES)
+    commands = parser.add_subparsers(dest="command", metavar="<command>")
+
+    def add(name, parents, help_text, description):
+        return commands.add_parser(
+            name, parents=parents, help=help_text, description=description,
+            allow_abbrev=False, formatter_class=argparse.RawDescriptionHelpFormatter)
+
+    add(
+        "check", [vendor_opt, profiles_opt],
+        "validate the whole profile tree -- what CI runs",
+        "Validate the whole profile tree: preset name uniqueness, index coverage\n"
+        "both ways, compatible_printers, default-material references, obsolete,\n"
+        "conflicting and vector-typed keys, filament_id length, that normalize and\n"
+        "update-index would leave every bundle alone, and the tree-wide setting_id\n"
+        "and filament_id state. Exits nonzero on errors.\n"
+        "\n"
+        "--vendor narrows the per-vendor checks only: setting_id uniqueness and the\n"
+        "filament_id state are cross-vendor properties a narrowed run cannot answer,\n"
+        "so they always cover the whole tree.")
+
+    generate_cmd = add(
+        "generate-id", [vendor_opt, dry_run_opt, profiles_opt],
+        "write the id each profile's identity implies",
+        "Write the id every profile should carry: filament_id from each filament's\n"
+        "(filament_vendor, filament_type, name) triple, setting_id from each preset's\n"
+        "(vendor, type, name). Idempotent and byte-preserving.\n"
+        "\n"
+        "The id is a function of the triple alone, so a narrowed run writes exactly\n"
+        "what a full one would; check reports whatever it left outside.")
+    which = generate_cmd.add_mutually_exclusive_group()
+    which.add_argument("--filament-id", action="store_true", dest="filament_id",
+                       help="write filament_id only, skipping setting_id")
+    which.add_argument("--setting-id", action="store_true", dest="setting_id",
+                       help="write setting_id only, skipping filament_id")
+
+    normalize_cmd = add(
+        "normalize", [vendor_opt, type_opt, dry_run_opt, profiles_opt],
+        "rewrite profile files into their canonical shape",
+        "Add a missing \"type\", drop keys the slicer no longer reads, resolve the\n"
+        "extruder_clearance_* conflict, arrayify the filament options that are\n"
+        "vectors, and rewrite each file with its identifying keys first.\n"
+        "\n"
+        "Rewrites whole files, so it normalizes their formatting and key order too.")
+    normalize_cmd.add_argument("--force", action="store_true",
+                         help="rewrite every profile, not only the ones that changed")
+
+    add("trim", [vendor_opt, type_opt, dry_run_opt, profiles_opt],
+        "delete profile files no <vendor>.json list references",
+        "Delete profile files that a vendor's <vendor>.json does not index. The\n"
+        "loader only ever reads the sub_paths listed there, so an unindexed preset\n"
+        "never loads.\n"
+        "\n"
+        "Use only for deliberate cleanup, previewed with --dry-run. Newly added,\n"
+        "unindexed presets can be deleted too; omit trim from the authoring workflow.\n"
+        "\n"
+        "Assets and data files are kept, a file that cannot be parsed is kept and\n"
+        "reported, and so is one a surviving profile inherits from that no indexed\n"
+        "profile provides -- but a stale copy of an indexed profile goes, since\n"
+        "inherits resolves by name and the indexed one is what children get.")
+
+    add("update-index", [vendor_opt, type_opt, dry_run_opt, profiles_opt],
+        "regenerate the *_list sections of <vendor>.json",
+        "Rebuild the *_list sections of each <vendor>.json from the files on disk,\n"
+        "ordered parents-first so the loader resolves inherits in one pass.\n"
+        "\n"
+        "A profile is indexed under the section its own \"type\" names, so run\n"
+        "normalize first: it is what writes a missing type. Two files claiming one\n"
+        "preset name leave that index alone, because a rebuild could only keep one\n"
+        "of them. Identify the intended preset and delete or rename the duplicate.\n"
+        "Use trim only for deliberate unindexed-file cleanup, previewed with\n"
+        "--dry-run; it can also delete newly authored presets.")
+
+    return parser
+
+
+def main(argv=None):
+    _utf8_console()
+    argv = sys.argv[1:] if argv is None else list(argv)
+    parser = build_parser()
+    args = parser.parse_args(argv)
+    if args.command is None:
+        parser.print_help()
+        return 0
+
+    profiles_dir = args.profiles
+    # check_profile.sh passes --vendor "${VENDOR}" unconditionally (bash 3.2 cannot
+    # expand an empty array under set -u), and an empty value has always meant
+    # "every vendor" -- so drop empties rather than looking up a vendor named "".
+    vendors = sorted({v for v in getattr(args, "vendor", []) if v}) or None
+    if vendors:
+        unknown = sorted(set(vendors) - set(list_profile_dirs(profiles_dir)))
+        if unknown:
+            for vendor in unknown:
+                print_error(f'unknown vendor "{vendor}" in {profiles_dir}')
+            return 1
+    profile_types = tuple(getattr(args, "profile_type", []) or ()) or None
+
+    if args.command == "check":
+        errors = check_profiles(profiles_dir, vendors)
+        return 1 if errors else 0
+
+    if args.command == "generate-id":
+        return run_generate_id(profiles_dir, vendors, args.filament_id, args.setting_id,
+                               args.dry_run)
+
+    if args.command == "normalize":
+        _changed, errors = normalize_profiles(profiles_dir, vendors, profile_types,
+                                        force=args.force, dry_run=args.dry_run)
+    elif args.command == "trim":
+        _removed, errors = trim_profiles(profiles_dir, vendors, profile_types,
+                                         dry_run=args.dry_run)
+    else:  # update-index
+        _changed, errors = update_profile_indexes(profiles_dir, vendors, profile_types,
+                                                  dry_run=args.dry_run)
+    return 1 if errors else 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())
diff --git a/scripts/run_unit_tests.sh b/scripts/run_unit_tests.sh
index f6a01dd3e0..1d3f0046fd 100755
--- a/scripts/run_unit_tests.sh
+++ b/scripts/run_unit_tests.sh
@@ -7,8 +7,9 @@
 #
 # Usage: run_unit_tests.sh [TEST_DIR] [BUILD_CONFIG]
 #   TEST_DIR      directory containing the built tests (default: build/tests)
-#   BUILD_CONFIG  configuration to run; required for multi-config generators
-#                 (Windows/macOS), harmless/omitted for single-config (Linux).
+#   BUILD_CONFIG  configuration to run; required for multi-config generators, which all
+#                 build scripts use (build_linux.sh too: Ninja Multi-Config). Without it,
+#                 tests registered with plain add_test() lose their labels and report "Not Run".
 
 ROOT_DIR="$(dirname "$0")/.."
 
@@ -17,8 +18,9 @@ cd "${ROOT_DIR}" || exit 1
 TEST_DIR="${1:-build/tests}"
 BUILD_CONFIG="${2:-}"
 
-# Run the whole suite, excluding tests tagged [NotWorking].
+# Run the whole suite, excluding tests tagged [NotWorking] and tests labelled RequiresApp,
+# which run the built orca-slicer binary that this directory does not contain.
 # --no-tests=error fails the job if the filter matches nothing (instead of passing green).
-args=(--test-dir "${TEST_DIR}" -LE "NotWorking" --no-tests=error --output-junit "$(pwd)/ctest_results.xml" --output-on-failure -j)
+args=(--test-dir "${TEST_DIR}" -LE "NotWorking|RequiresApp" --no-tests=error --output-junit "$(pwd)/ctest_results.xml" --output-on-failure -j)
 [ -n "${BUILD_CONFIG}" ] && args+=(--build-config "${BUILD_CONFIG}")
 ctest "${args[@]}"
diff --git a/scripts/test_build_win.ps1 b/scripts/test_build_win.ps1
index a8abfbc7bf..65dec8ffa1 100644
--- a/scripts/test_build_win.ps1
+++ b/scripts/test_build_win.ps1
@@ -22,6 +22,7 @@
         Match       regexes; each must match at least one output line
         NotMatch    regexes; none may match any output line
         NotExists   paths that must not exist after the case runs
+        DateStampedZip  require a bundle date from during this case's invocation
 
 .PARAMETER Name
     Run only the cases whose name matches this regex. Headings with no
@@ -109,12 +110,6 @@ $slnDir = Join-Path $fixtures 'sln'
 New-Item -ItemType Directory -Force -Path $slnDir | Out-Null
 Set-Content -Path (Join-Path $slnDir 'OrcaSlicer.sln') -Value '' -Encoding ascii
 
-# The pack stamp is checked against real dates, so a locale-dependent parse
-# in the script cannot pass by looking date-shaped. Yesterday is accepted too,
-# so a run that crosses midnight does not flake.
-$dateStamps = @((Get-Date -Format 'yyyyMMdd'), (Get-Date).AddDays(-1).ToString('yyyyMMdd'))
-$stampPattern = '_(' + ($dateStamps -join '|') + ')\.zip$'
-
 $cases = @(
     'argument handling'
     @{ Name = 'no arguments prints help'; Args = @(); DryRun = $false
@@ -326,12 +321,12 @@ $cases = @(
        Contains = @('OrcaSlicer_dep_win-x64_')
        NotContains = @('-clang', '-Release') }
     @{ Name = 'the bundle is stamped with today, not a shuffled date'; Args = @('-p')
-       Match = @($stampPattern) }
+       DateStampedZip = $true }
     # powershell.exe is not in System32 itself, so a trimmed PATH used to
     # leave the stamp empty and the bundle named OrcaSlicer_dep_win-x64_.zip.
     @{ Name = 'the bundle is stamped even with a bare PATH'; Args = @('-p')
        Env = @{ PATH = 'C:\Windows\system32;C:\Windows' }
-       Match = @($stampPattern) }
+       DateStampedZip = $true }
     @{ Name = '-p packs without rebuilding'; Args = @('-p')
        Match = @('^\+ .*(7z\.exe a|tar\.exe -a -c -f) ')
        NotContains = @('cmake -S deps') }
@@ -861,7 +856,7 @@ function Invoke-BuildScript {
 
 $knownFields = @(
     'Name', 'Args', 'ExpectExit', 'DryRun', 'First', 'Env',
-    'Contains', 'NotContains', 'Match', 'NotMatch', 'NotExists'
+    'Contains', 'NotContains', 'Match', 'NotMatch', 'NotExists', 'DateStampedZip'
 )
 
 function Test-Case {
@@ -876,7 +871,9 @@ function Test-Case {
     $expect = 0
     if ($Case.ContainsKey('ExpectExit')) { $expect = $Case['ExpectExit'] }
 
+    $started = Get-Date
     $result = Invoke-BuildScript -Arguments $argv -Environment $Case['Env']
+    $finished = Get-Date
 
     $problems = @()
 
@@ -902,6 +899,15 @@ function Test-Case {
             $problems += "no line matching /$pattern/"
         }
     }
+    if ($Case['DateStampedZip']) {
+        # Bound the accepted dates to this invocation so crossing midnight is
+        # valid without allowing an unrelated past or future date.
+        $dateStamps = @($started.ToString('yyyyMMdd'), $finished.ToString('yyyyMMdd')) | Select-Object -Unique
+        $pattern = '_(' + ($dateStamps -join '|') + ')\.zip$'
+        if (@($lines | Where-Object { $_ -match $pattern }).Count -eq 0) {
+            $problems += "no line matching /$pattern/"
+        }
+    }
     foreach ($pattern in $Case['NotMatch']) {
         foreach ($line in @($lines | Where-Object { $_ -match $pattern })) {
             $problems += "line matches /$pattern/: $line"
diff --git a/scripts/tests/test_filament_id.py b/scripts/tests/test_filament_id.py
index 3e7a6d2aec..001763fca9 100644
--- a/scripts/tests/test_filament_id.py
+++ b/scripts/tests/test_filament_id.py
@@ -1,5 +1,5 @@
 #!/usr/bin/env python3
-"""Tests for scripts/orca_id_tool.py (stdlib unittest, no external deps).
+"""Tests for scripts/orca_profile_tool.py (stdlib unittest, no external deps).
 
 Run from the repo root:  python -m unittest discover -s scripts/tests -v
 """
@@ -17,7 +17,7 @@ import uuid
 
 sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
 
-import orca_id_tool as afi  # noqa: E402
+import orca_profile_tool as afi  # noqa: E402
 import update_bambu_filament_ids as ubfi  # noqa: E402
 
 REPO_ROOT = os.path.abspath(os.path.join(os.path.dirname(__file__), "..", ".."))
@@ -55,13 +55,12 @@ def preset(name, filament_id=None, inherits=None, instantiation=True,
 
 
 class SyntheticTree:
-    """A throwaway resources/profiles-shaped directory plus a snapshot path."""
+    """A throwaway resources/profiles-shaped directory."""
 
     def __init__(self):
         self.dir = tempfile.mkdtemp(prefix="filament_id_test_")
         self.profiles = os.path.join(self.dir, "profiles")
         os.makedirs(self.profiles)
-        self.snapshot = os.path.join(self.dir, "filament_id_snapshot.json")
 
     def cleanup(self):
         shutil.rmtree(self.dir, ignore_errors=True)
@@ -110,16 +109,6 @@ class SyntheticTree:
         with open(idx_path, "w", encoding="utf-8") as f:
             json.dump(index, f, indent=4, ensure_ascii=False)
 
-    def remove_preset(self, vendor, name):
-        os.remove(self.preset_path(vendor, name))
-        idx_path = os.path.join(self.profiles, vendor + ".json")
-        with open(idx_path, encoding="utf-8") as f:
-            index = json.load(f)
-        index["filament_list"] = [
-            e for e in index["filament_list"] if e["name"] != name]
-        with open(idx_path, "w", encoding="utf-8") as f:
-            json.dump(index, f, indent=4, ensure_ascii=False)
-
     def bytes_map(self):
         """{relative path -> file bytes} over every .json in the tree."""
         raw = {}
@@ -135,17 +124,11 @@ class SyntheticTree:
 
     # -- pipeline wrappers ---------------------------------------------------
 
-    def update_snapshot(self, dry_run=False):
-        buf = io.StringIO()
-        with contextlib.redirect_stdout(buf):
-            rc = afi.update_snapshot(self.profiles, self.snapshot, dry_run)
-        return rc, buf.getvalue()
-
     def check(self, map_path=None):
         buf = io.StringIO()
         kwargs = {} if map_path is None else {"map_path": map_path}
         with contextlib.redirect_stdout(buf):
-            errors = afi.check_filament_ids(self.profiles, self.snapshot, **kwargs)
+            errors = afi.check_filament_ids(self.profiles, **kwargs)
         return errors, buf.getvalue()
 
     # assign() and remint() are the same one pass over the tree — every filament
@@ -164,22 +147,22 @@ class SyntheticTree:
             changed, errors = afi.generate_filament_ids(self.profiles, vendors, dry_run)
         return changed, errors, buf.getvalue()
 
-    def cli(self, *flags):
+    def cli(self, *argv):
         """Run main() against this tree, capturing stdout."""
+        flags = [*argv, "--profiles", self.profiles]
         buf = io.StringIO()
         with contextlib.redirect_stdout(buf):
-            rc = afi.main([*flags, "--profiles", self.profiles,
-                           "--snapshot", self.snapshot])
+            rc = afi.main(flags)
         return rc, buf.getvalue()
 
 
 def make_clean_tree(apla_id="AX01", generic_id="OGFL99"):
     """Baseline tree: OFL base+generic, a vendor filament, a clean tuned generic.
 
-    apla_id/generic_id default to arbitrary non-OF placeholders (sanctioned by
-    the snapshot below) since most tests only need "already assigned, don't
-    touch" and never run the checks. TestAssign and the check tests pass real
-    OF-format ids instead (OfCleanTreeCase).
+    apla_id/generic_id default to arbitrary non-OF placeholders since most tests
+    only need "already assigned, don't touch" and never run the checks.
+    TestAssign and the check tests pass real OF-format ids instead
+    (OfCleanTreeCase).
     """
     t = SyntheticTree()
     t.add_vendor(OFL, [
@@ -197,8 +180,6 @@ def make_clean_tree(apla_id="AX01", generic_id="OGFL99"):
         preset("Generic PLA @P1", inherits="Generic PLA @System",
                compatible_printers=["P1 0.4 nozzle"]),
     ])
-    rc, _out = t.update_snapshot()
-    assert rc == 0
     return t
 
 
@@ -210,10 +191,9 @@ class SyntheticTreeCase(unittest.TestCase):
 
 class OfCleanTreeCase(unittest.TestCase):
     """Like SyntheticTreeCase, but the baseline filament/generic already carry
-    real OF-format ids (check 1 now rejects "AX01"/"OGFL99" unconditionally,
-    with no snapshot exemption), so an otherwise-untouched tree still passes
-    check_filament_ids. Tests that specifically need a non-OF baseline to
-    remint (TestRemint, TestUpdateSnapshot) keep using SyntheticTreeCase
+    real OF-format ids (check 1 rejects "AX01"/"OGFL99"), so an
+    otherwise-untouched tree passes check_filament_ids. Tests that specifically
+    need a non-OF baseline to remint (TestRemint) keep using SyntheticTreeCase
     instead.
     """
     def setUp(self):
@@ -229,7 +209,7 @@ class OfCleanTreeCase(unittest.TestCase):
 
 class TestMint(unittest.TestCase):
     def test_namespace_literal(self):
-        # Frozen: derived from the setting_id namespace; baked into the snapshot.
+        # Frozen: derived from the setting_id namespace; baked into every shipped id.
         self.assertEqual(afi.FILAMENT_ID_NAMESPACE,
                          uuid.UUID("c4d3ff49-4c32-5534-a3e3-00894157ab97"))
 
@@ -426,26 +406,6 @@ class TestTripleResolution(unittest.TestCase):
                          ("MyVendor", "PLA", "MyPLA"))
 
 
-# ---------------------------------------------------------------------------
-# reserved namespaces
-# ---------------------------------------------------------------------------
-
-class TestReservedSpaces(unittest.TestCase):
-    def test_owners(self):
-        # Bambu AMS/RFID catalog: reserved, but no vendor (not even BBL) may declare it
-        self.assertEqual(afi.reserved_space_owner("GFL99"), (True, None))
-        # Qidi device protocol: reserved, but no vendor may declare it
-        self.assertEqual(afi.reserved_space_owner("QD_X4_PLA"), (True, None))
-        self.assertEqual(afi.reserved_space_owner("P1234abc"), (True, None))
-        self.assertEqual(afi.reserved_space_owner("pAbCdEf1"), (True, None))  # case-insensitive
-        self.assertEqual(afi.reserved_space_owner("null"), (True, None))
-        self.assertEqual(afi.reserved_space_owner("OF5CgdDq"), (False, None))
-        self.assertEqual(afi.reserved_space_owner("P1234abcd"), (False, None))  # 8 hex chars: not the user space
-
-    def test_gf_is_reserved_and_ownerless(self):
-        self.assertEqual(afi.reserved_space_owner("GFA00"), (True, None))
-
-
 # ---------------------------------------------------------------------------
 # checks on synthetic trees
 # ---------------------------------------------------------------------------
@@ -468,22 +428,10 @@ class TestChecks(OfCleanTreeCase):
         self.assertIn('is not a minted "OF" id', out)
         self.assertIn("BOGUS_9", out)
 
-    def test_check2_new_claim_needs_snapshot_update(self):
-        self.t.write_preset("VendorA", preset("ANEW @P2", inherits="APLA @base",
-                                              compatible_printers=["P2"]))
-        errors, out = self.t.check()
-        self.assertGreater(errors, 0)
-        self.assertIn('claim "VendorA/ANEW" is not sanctioned', out)
-        self.assertIn("--update-snapshot", out)
-
-    def test_check2_vanished_claim_is_stability_error(self):
-        self.t.remove_preset("VendorA", "APLA @P1")
-        errors, out = self.t.check()
-        self.assertGreater(errors, 0)
-        self.assertIn("stability", out)
-        self.assertIn('"VendorA/APLA"', out)
-
-    def test_check2_triple_change_needs_snapshot_update(self):
+    def test_check2_triple_change_needs_a_remint(self):
+        # Correcting a triple changes the product's identity: the old id is no
+        # longer its mint, reported on the root and again under the variant
+        # inheriting it, until generate-id re-mints it.
         apla_id = afi.generate_filament_id("AVendor", "PLA", "APLA")
         self.t.write_preset("VendorA", preset("APLA @base", filament_id=apla_id,
                                               instantiation=False,
@@ -491,26 +439,15 @@ class TestChecks(OfCleanTreeCase):
                                               filament_type="PETG"),
                             register=False)
         errors, out = self.t.check()
-        self.assertGreater(errors, 0)
-        self.assertIn('triple "AVendor/PETG/APLA" is not sanctioned', out)
-        self.assertIn('which records "AVendor/PLA/APLA"', out)
-        # Sanctioning the new triple is not enough: the old id is no longer its
-        # mint (check 3, nothing grandfathered) — the identity fix is a re-mint,
-        # reported on the root and again under the variant inheriting it.
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
         self.assertEqual(errors, 2, out)
         self.assertIn("does not match the mint of its triple", out)
         self.assertIn('"APLA @P1" (VendorA/filament/APLA @P1.json) inherits filament_id', out)
         _changed, errors, out = self.t.remint(["VendorA"])
         self.assertEqual(errors, 0, out)
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
         errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
 
-    def test_check3_of_id_must_match_triple_mint(self):
+    def test_check2_of_id_must_match_triple_mint(self):
         self.t.write_preset("VendorA", preset("BNEW @base", filament_id="OFZZZZZZ",
                                               instantiation=False,
                                               filament_vendor="BV", filament_type="PLA"))
@@ -521,39 +458,20 @@ class TestChecks(OfCleanTreeCase):
         self.assertIn("does not match the mint of its triple", out)
         self.assertIn(afi.generate_filament_id("BV", "PLA", "BNEW"), out)
 
-    def test_check3_no_grandfathering_of_a_wrong_declaration(self):
-        # Sanctioning the tree does not excuse a declaration from its mint.
-        self.t.write_preset("VendorA", preset("CNEW @base", filament_id="OFZZZZZZ",
-                                              instantiation=False,
-                                              filament_vendor="CV", filament_type="PLA"))
-        self.t.write_preset("VendorA", preset("CNEW @P1", inherits="CNEW @base",
-                                              compatible_printers=["P1"]))
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
-        self.assertEqual(errors, 2, out)  # the declaration, and the variant inheriting it
-        self.assertIn("does not match the mint of its triple", out)
-        self.assertIn('"CNEW @P1" (VendorA/filament/CNEW @P1.json) inherits filament_id', out)
-
-    def test_check3_inherited_id_must_be_the_mint_of_own_triple(self):
+    def test_check2_inherited_id_must_be_the_mint_of_own_triple(self):
         # A preset of another filament inheriting APLA's root takes APLA's id,
         # which is not the mint of ITS triple (AVendor/PLA/Tuned PLA).
         self.t.write_preset("VendorA", preset("Tuned PLA @P1", inherits="APLA @base",
                                               compatible_printers=["P1"]))
         errors, out = self.t.check()
-        self.assertGreater(errors, 0)
+        self.assertEqual(errors, 1, out)
         self.assertIn('"Tuned PLA @P1" (VendorA/filament/Tuned PLA @P1.json) inherits '
                       'filament_id "%s"' % afi.generate_filament_id("AVendor", "PLA", "APLA"),
                       out)
         self.assertIn('mints "%s"' % afi.generate_filament_id("AVendor", "PLA", "Tuned PLA"),
                       out)
-        # ... and sanctioning the tree does not excuse it either.
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
-        self.assertEqual(errors, 1, out)
 
-    def test_check3_lists_every_preset_inheriting_a_wrong_id(self):
+    def test_check2_lists_every_preset_inheriting_a_wrong_id(self):
         # A wrong declaration is reported under every preset inheriting it, its
         # own product's variant and another product alike: each one's effective
         # id is not the mint of its own triple, and each is listed. Nothing is
@@ -570,11 +488,10 @@ class TestChecks(OfCleanTreeCase):
         self.assertIn('"DNEW @P1" (VendorA/filament/DNEW @P1.json) inherits filament_id', out)
         self.assertIn('"Other DNEW @P1" (VendorA/filament/Other DNEW @P1.json) inherits '
                       'filament_id', out)
-        # The unsanctioned id (check 2), the declaration (3a), and both presets
-        # inheriting it (3b).
-        self.assertEqual(errors, 4, out)
+        # The declaration (2a), and both presets inheriting it (2b).
+        self.assertEqual(errors, 3, out)
 
-    def test_check3_reports_an_inherited_mismatch_even_when_its_own_product_misdeclares_the_id(self):
+    def test_check2_reports_an_inherited_mismatch_even_when_its_own_product_misdeclares_the_id(self):
         # "Tuned PLA @P1" inherits APLA's root, so it carries APLA's id: wrong
         # for its own product however the declarations around it are fixed.
         # That "Tuned PLA @base" — its own product — misdeclares that same id
@@ -591,11 +508,11 @@ class TestChecks(OfCleanTreeCase):
                       'not match the mint of its triple', out)
         self.assertIn('"Tuned PLA @P1" (VendorA/filament/Tuned PLA @P1.json) inherits '
                       'filament_id', out)
-        # The unsanctioned claim and triple (check 2), the declaration (3a) and
-        # the inherited id (3b): four distinct errors, nothing folded away.
-        self.assertEqual(errors, 4, out)
+        # The declaration (2a) and the inherited id (2b): two distinct errors,
+        # nothing folded away.
+        self.assertEqual(errors, 2, out)
 
-    def test_check3_reports_a_collision_between_two_products(self):
+    def test_check2_reports_a_collision_between_two_products(self):
         # Two products whose triples mint one id is a base62 collision. There
         # is no salted or hand-picked second id to fall back on: the check
         # names both products, and the remedy is a rename so the triples differ.
@@ -619,13 +536,12 @@ class TestChecks(OfCleanTreeCase):
         self.assertIn("V/PLA/X", out)
         self.assertIn("W/ABS/Y", out)
         # Each declaration is the mint of its own triple, so the collision is
-        # the only identity error — no product is pushed off its id — and the
-        # unsanctioned id (check 2) is the only other one.
+        # the only error — no product is pushed off its id.
         self.assertNotIn("does not match the mint", out)
         self.assertNotIn("inherits filament_id", out)
-        self.assertEqual(errors, 2, out)
+        self.assertEqual(errors, 1, out)
 
-    def test_check3_renamed_tuned_generic_is_an_identity_error(self):
+    def test_check2_renamed_tuned_generic_is_an_identity_error(self):
         # Riding the OFL generic under another base name: same rule, same error.
         self.t.write_preset("VendorA", preset("Tuned PLA @P1",
                                               inherits="Generic PLA @System",
@@ -635,7 +551,7 @@ class TestChecks(OfCleanTreeCase):
         self.assertIn("Tuned PLA @P1", out)
         self.assertIn("inherits filament_id", out)
 
-    def test_check3_own_key_on_an_instantiated_preset_is_fine(self):
+    def test_check2_own_key_on_an_instantiated_preset_is_fine(self):
         # Where the id comes from is irrelevant: a variant may carry the key.
         apla_id = afi.generate_filament_id("AVendor", "PLA", "APLA")
         self.t.write_preset("VendorA", preset("APLA @P1", filament_id=apla_id,
@@ -645,7 +561,7 @@ class TestChecks(OfCleanTreeCase):
         errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
 
-    def test_check3_inheriting_a_real_filament_of_another_product_is_fine(self):
+    def test_check2_inheriting_a_real_filament_of_another_product_is_fine(self):
         # A branded product may inherit the OFL generic (an instantiated
         # preset) for its settings; it declares its own triple's id.
         fid = afi.generate_filament_id("BV", "PLA", "Branded PLA")
@@ -653,8 +569,6 @@ class TestChecks(OfCleanTreeCase):
                                               inherits="Generic PLA @System",
                                               filament_vendor="BV",
                                               compatible_printers=["P1"]))
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
         errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
         # With a wrong key it is a plain mint mismatch: the parent plays no
@@ -669,11 +583,12 @@ class TestChecks(OfCleanTreeCase):
         self.assertGreater(errors, 0)
         self.assertIn("does not match the mint of its triple", out)
 
-    def test_check4_reserved_namespace_claims(self):
-        for fid, marker in [("GFX99", "Bambu AMS/RFID catalog"),
-                            ("QD_X_PLA", "composed by the device"),
-                            ("P1a2b3c4", "user-custom"),
-                            ("null", "user-custom")]:
+    def test_check1_an_id_another_system_composed_is_not_a_mint(self):
+        # Nothing is reserved because nothing is exempt: an id some other system
+        # composes for its own purposes - Bambu's catalog, a Qidi box, the dialog
+        # that creates a user filament - is simply not the mint of a triple, and
+        # check 1 rejects it for that and nothing else.
+        for fid in ("GFX99", "QD_X_PLA", "P1a2b3c4", "null"):
             with self.subTest(fid=fid):
                 name = f"R{fid} @base"
                 self.t.write_preset("VendorA", preset(name, filament_id=fid,
@@ -684,25 +599,19 @@ class TestChecks(OfCleanTreeCase):
                                                       compatible_printers=["P1"]))
                 errors, out = self.t.check()
                 self.assertGreater(errors, 0)
-                self.assertIn("reserved id space", out)
-                self.assertIn(marker, out)
+                self.assertIn(f'filament_id "{fid}"', out)
+                self.assertIn('is not a minted "OF" id', out)
 
-    def test_check3c_unresolvable_instantiated_filament(self):
+    def test_check2c_unresolvable_instantiated_filament(self):
         self.t.write_preset("VendorA", preset("DNEW @P1", compatible_printers=["P1"]))
         errors, out = self.t.check()
         self.assertGreater(errors, 0)
         self.assertIn("resolves no filament_id", out)
         self.assertIn("hard load error", out)
 
-    def test_missing_snapshot_is_an_error(self):
-        os.remove(self.t.snapshot)
-        errors, out = self.t.check()
-        self.assertEqual(errors, 1)
-        self.assertIn("snapshot not found", out)
 
-
-class TestCheck5(OfCleanTreeCase):
-    def test_5a_empty_vendor_is_hard_error(self):
+class TestCheck3(OfCleanTreeCase):
+    def test_3a_empty_vendor_is_hard_error(self):
         fid = afi.generate_filament_id("", "PLA", "NVPLA")
         self.t.write_preset("VendorA", preset("NVPLA @base", filament_id=fid,
                                               instantiation=False,
@@ -710,17 +619,11 @@ class TestCheck5(OfCleanTreeCase):
         self.t.write_preset("VendorA", preset("NVPLA @P1", inherits="NVPLA @base",
                                               compatible_printers=["P1"]))
         errors, out = self.t.check()
-        self.assertGreater(errors, 0)
-        self.assertIn("resolves empty filament_vendor", out)
-        self.assertIn('filament_vendor "Generic"', out)
-        # No grandfathering: sanctioning the tree does not silence check 5a.
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
         self.assertEqual(errors, 1, out)
         self.assertIn("resolves empty filament_vendor", out)
+        self.assertIn('filament_vendor "Generic"', out)
 
-    def test_5b_divergent_filament_triples(self):
+    def test_3b_divergent_filament_triples(self):
         id1 = afi.generate_filament_id("MV", "PLA", "MPLA")
         id2 = afi.generate_filament_id("MV", "PETG", "MPLA")
         self.t.write_preset("VendorA", preset("MPLA @base1", filament_id=id1,
@@ -732,18 +635,12 @@ class TestCheck5(OfCleanTreeCase):
                                               filament_vendor="MV",
                                               filament_type="PETG"))
         errors, out = self.t.check()
-        self.assertGreater(errors, 0)
+        self.assertEqual(errors, 1, out)
         self.assertIn("divergent triples", out)
         self.assertIn("MV/PLA/MPLA", out)
         self.assertIn("MV/PETG/MPLA", out)
-        # No grandfathering: sanctioning the tree does not silence check 5b.
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
-        self.assertEqual(errors, 1, out)
-        self.assertIn("divergent triples", out)
 
-    def test_5_cross_bundle_divergence_is_warning_only(self):
+    def test_3_cross_bundle_divergence_is_warning_only(self):
         fid = afi.generate_filament_id("BV", "PETG", "APLA")
         self.t.add_vendor("VendorB", [
             preset("APLA @base", filament_id=fid, instantiation=False,
@@ -751,8 +648,6 @@ class TestCheck5(OfCleanTreeCase):
             preset("APLA @PB", inherits="APLA @base",
                    compatible_printers=["PB 0.4 nozzle"]),
         ])
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
         errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
         self.assertIn("[WARNING]", out)
@@ -760,7 +655,7 @@ class TestCheck5(OfCleanTreeCase):
         self.assertIn('"APLA"', out)
 
 
-class TestCheck6(OfCleanTreeCase):
+class TestCheck4(OfCleanTreeCase):
     def _write_map(self, rows):
         path = os.path.join(self.t.dir, "bambu_filament_ids.json")
         ubfi.write_map(path, rows, "testcommit", "2026-09-04")
@@ -862,101 +757,6 @@ class TestCheck6(OfCleanTreeCase):
         self.assertIn('declares no "bambu_id"', out)
 
 
-# ---------------------------------------------------------------------------
-# --update-snapshot
-# ---------------------------------------------------------------------------
-
-class TestUpdateSnapshot(SyntheticTreeCase):
-    def test_idempotent_and_deterministic(self):
-        with open(self.t.snapshot, "rb") as f:
-            first = f.read()
-        rc, out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        self.assertIn("nothing changed", out)
-        with open(self.t.snapshot, "rb") as f:
-            self.assertEqual(f.read(), first)
-        self.assertTrue(first.endswith(b"\n"))
-        self.assertNotIn(b"\r", first)
-        snap = json.loads(first.decode("utf-8"))
-        self.assertEqual(list(snap), ["ids"])  # state only, no exception lists
-        self.assertEqual(list(snap["ids"]), sorted(snap["ids"]))
-        self.assertEqual(snap["ids"]["AX01"], {
-            "filaments": ["VendorA/APLA"], "name": "APLA",
-            "filament_type": "PLA", "filament_vendor": "AVendor"})
-        self.assertEqual(snap["ids"]["OGFL99"], {
-            "filaments": ["OrcaFilamentLibrary/Generic PLA", "VendorA/Generic PLA"],
-            "name": "Generic PLA", "filament_type": "PLA", "filament_vendor": "Generic"})
-        # Key order is part of the on-disk format.
-        self.assertEqual(list(snap["ids"]["AX01"]),
-                         ["filaments", "name", "filament_type", "filament_vendor"])
-
-    def test_refuses_a_tree_it_could_not_read(self):
-        # A bundle that does not parse contributes no ids, so sanctioning the
-        # rest would record the loss as a deliberate removal.
-        with open(self.t.snapshot, "rb") as f:
-            before = f.read()
-        with open(os.path.join(self.t.profiles, "VendorA",
-                               "filament", "APLA @base.json"), "w",
-                  encoding="utf-8") as f:
-            f.write("{ not json")
-        rc, out = self.t.update_snapshot()
-        self.assertEqual(rc, 1, out)
-        self.assertIn("unreadable filament profile", out)
-        with open(self.t.snapshot, "rb") as f:
-            self.assertEqual(f.read(), before)
-
-    def test_refuses_an_id_declared_under_two_triples(self):
-        # VendorB re-declares APLA's id for a different product: one id, two
-        # triples. No single entry can describe it, and check 3 rejects it anyway.
-        self.t.add_vendor("VendorB", [
-            preset("BPLA @base", filament_id="AX01", instantiation=False,
-                   filament_vendor="BVendor", filament_type="PLA"),
-            preset("BPLA @P1", inherits="BPLA @base", compatible_printers=["P1"]),
-        ])
-        with open(self.t.snapshot, "rb") as f:
-            before = f.read()
-        rc, out = self.t.update_snapshot()
-        self.assertEqual(rc, 1)
-        self.assertIn('refusing to sanction filament_id "AX01": declared under 2 triples '
-                      '(AVendor/PLA/APLA; BVendor/PLA/BPLA)', out)
-        with open(self.t.snapshot, "rb") as f:
-            self.assertEqual(f.read(), before)  # nothing written on refusal
-
-    def test_refuses_reserved_namespace_ids(self):
-        self.t.write_preset("VendorA", preset("CNEW @base", filament_id="GFX99",
-                                              instantiation=False,
-                                              filament_vendor="CV",
-                                              filament_type="PLA"))
-        self.t.write_preset("VendorA", preset("CNEW @P1", inherits="CNEW @base",
-                                              compatible_printers=["P1"]))
-        with open(self.t.snapshot, "rb") as f:
-            before = f.read()
-        rc, out = self.t.update_snapshot()
-        self.assertEqual(rc, 1)
-        self.assertIn("refusing to sanction", out)
-        with open(self.t.snapshot, "rb") as f:
-            self.assertEqual(f.read(), before)  # nothing written on refusal
-
-    def test_dry_run_reports_without_writing(self):
-        self.t.write_preset("VendorA", preset("ANEW @P2", inherits="APLA @base",
-                                              compatible_printers=["P2"]))
-        with open(self.t.snapshot, "rb") as f:
-            before = f.read()
-        rc, out = self.t.update_snapshot(dry_run=True)
-        self.assertEqual(rc, 0)
-        self.assertIn("would be rewritten", out)
-        self.assertIn("claims added      : 1", out)
-        with open(self.t.snapshot, "rb") as f:
-            self.assertEqual(f.read(), before)
-        # the real run writes exactly what the dry run reported
-        rc, out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        self.assertIn("snapshot written", out)
-        snap = load_json_file(self.t.snapshot)
-        self.assertEqual(snap["ids"]["AX01"]["filaments"],
-                         ["VendorA/ANEW", "VendorA/APLA"])
-
-
 # ---------------------------------------------------------------------------
 # --generate: one rule for inserts and rewrites alike
 # ---------------------------------------------------------------------------
@@ -1040,7 +840,7 @@ class TestAssign(OfCleanTreeCase):
     def test_parent_of_another_filament_never_receives_the_key(self):
         # Members whose id-less parent belongs to another filament (here one
         # parent shared by two filaments) carry the key themselves: the
-        # parent's own triple would mint a different id (check 3).
+        # parent's own triple would mint a different id (check 2).
         self.t.write_preset("VendorA", preset("shared_base", instantiation=False,
                                               filament_vendor="SV",
                                               filament_type="PLA"))
@@ -1058,8 +858,6 @@ class TestAssign(OfCleanTreeCase):
         parent = load_json_file(self.t.preset_path("VendorA", "shared_base"))
         self.assertNotIn("filament_id", parent)
         # ... and the tree they leave behind passes the identity check.
-        rc, _out = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
         errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
 
@@ -1536,7 +1334,7 @@ class TestRemint(SyntheticTreeCase):
 
 class TestCli(unittest.TestCase):
     """main(argv) over a synthetic tree. The clean tree's baseline ids are
-    deliberately non-conformant ("AX01"/"OGFL99"), so a --generate run always
+    deliberately non-conformant ("AX01"/"OGFL99"), so a generate-id run always
     has both a filament_id rewrite and setting_id inserts to do."""
 
     def setUp(self):
@@ -1544,47 +1342,24 @@ class TestCli(unittest.TestCase):
         self.addCleanup(self.t.cleanup)
 
     def test_bare_invocation_prints_help(self):
+        # Naming no command is not an error: it is how you find out what the
+        # commands are, and it must never be mistaken for a run that did work.
+        before = self.t.bytes_map()
         buf = io.StringIO()
         with contextlib.redirect_stdout(buf):
             rc = afi.main([])
         self.assertEqual(rc, 0)
         self.assertIn("usage:", buf.getvalue())
-        self.assertIn("--generate", buf.getvalue())
-        # ... and so does any invocation naming no mode: help, and no work
-        before = self.t.bytes_map()
-        rc, out = self.t.cli()
-        self.assertEqual(rc, 0)
-        self.assertIn("usage:", out)
+        for command in ("check", "generate-id", "normalize", "trim", "update-index"):
+            self.assertIn(command, buf.getvalue())
         self.assertEqual(self.t.bytes_map(), before)
 
-    def test_another_tree_needs_its_own_snapshot(self):
-        # --profiles retargets the tree, but the sanctioned state of that tree
-        # is not the repo snapshot: checking against it is meaningless and
-        # re-recording into it would overwrite the tracked file.
-        with open(afi.SNAPSHOT_PATH, "rb") as f:
-            repo_snapshot = f.read()
-        for mode in ("--check", "--update-snapshot"):
-            with self.assertRaises(SystemExit) as caught:
-                with contextlib.redirect_stderr(io.StringIO()):
-                    afi.main([mode, "--profiles", self.t.profiles])
-            self.assertEqual(caught.exception.code, 2, mode)
-        with open(afi.SNAPSHOT_PATH, "rb") as f:
-            self.assertEqual(f.read(), repo_snapshot)
-        # Named explicitly, both modes run against that tree.
-        rc, out = self.t.cli("--update-snapshot")
-        self.assertEqual(rc, 0, out)
-        # --generate never reads the snapshot, so it keeps working without one.
-        buf = io.StringIO()
-        with contextlib.redirect_stdout(buf):
-            rc = afi.main(["--dry-run", "--profiles", self.t.profiles])
-        self.assertEqual(rc, 0, buf.getvalue())
-
     def test_filament_id_and_setting_id_together_are_rejected(self):
         # Each flag's help promises it skips the other kind, so the pair cannot
         # quietly mean "both".
         with self.assertRaises(SystemExit) as caught:
             with contextlib.redirect_stderr(io.StringIO()):
-                afi.main(["--generate", "--filament-id", "--setting-id",
+                afi.main(["generate-id", "--filament-id", "--setting-id",
                           "--profiles", self.t.profiles])
         self.assertEqual(caught.exception.code, 2)
 
@@ -1593,14 +1368,14 @@ class TestCli(unittest.TestCase):
         path = self.t.preset_path("VendorA", "APLA @base")
         with open(path, "w", encoding="utf-8") as f:
             f.write("{ not json")
-        rc, out = self.t.cli("--generate")
+        rc, out = self.t.cli("generate-id")
         self.assertEqual(rc, 1, out)
         self.assertIn("error(s)", out)
         self.assertNotIn("SUCCESS", out)
 
-    def test_dry_run_alone_previews_generate(self):
+    def test_dry_run_previews_generate_id(self):
         before = self.t.bytes_map()
-        rc, out = self.t.cli("--dry-run")
+        rc, out = self.t.cli("generate-id", "--dry-run")
         self.assertEqual(rc, 0, out)
         self.assertIn("would ", out)
         self.assertIn("nothing written", out)
@@ -1615,7 +1390,7 @@ class TestCli(unittest.TestCase):
             filament_type="PLA", compatible_printers=["P1"]))
         before = self.t.bytes_map()
 
-        rc, out = self.t.cli("--generate")
+        rc, out = self.t.cli("generate-id")
 
         self.assertEqual(rc, 0, out)
         after = self.t.bytes_map()
@@ -1629,7 +1404,7 @@ class TestCli(unittest.TestCase):
 
     def test_dryrun_is_the_same_flag(self):
         before = self.t.bytes_map()
-        rc, out = self.t.cli("--dryrun")
+        rc, out = self.t.cli("generate-id", "--dryrun")
         self.assertEqual(rc, 0, out)
         self.assertIn("would ", out)  # the same preview, not a silent no-op
         self.assertIn("nothing written", out)
@@ -1637,7 +1412,7 @@ class TestCli(unittest.TestCase):
 
     def test_generate_vendor_writes_only_in_that_bundle(self):
         before = self.t.bytes_map()
-        rc, out = self.t.cli("--generate", "--vendor", "VendorA")
+        rc, out = self.t.cli("generate-id", "--vendor", "VendorA")
         self.assertEqual(rc, 0, out)
         after = self.t.bytes_map()
         changed = sorted(rel for rel in before if after[rel] != before[rel])
@@ -1646,7 +1421,7 @@ class TestCli(unittest.TestCase):
             self.assertTrue(rel.startswith("VendorA" + os.sep), rel)
         # The bundles it spared were not simply already conformant: the
         # un-narrowed run goes on to write in them too.
-        rc, out = self.t.cli("--generate")
+        rc, out = self.t.cli("generate-id")
         self.assertEqual(rc, 0, out)
         final = self.t.bytes_map()
         self.assertTrue(any(final[rel] != after[rel] for rel in after
@@ -1654,13 +1429,13 @@ class TestCli(unittest.TestCase):
 
     def test_generate_unknown_vendor_returns_1(self):
         before = self.t.bytes_map()
-        rc, out = self.t.cli("--generate", "--vendor", "Nope")
+        rc, out = self.t.cli("generate-id", "--vendor", "Nope")
         self.assertEqual(rc, 1)
         self.assertIn("unknown vendor", out)
         self.assertEqual(self.t.bytes_map(), before)
 
     def test_setting_id_only_leaves_filament_ids_alone(self):
-        rc, out = self.t.cli("--generate", "--setting-id")
+        rc, out = self.t.cli("generate-id", "--setting-id")
         self.assertEqual(rc, 0, out)
         root = load_json_file(self.t.preset_path("VendorA", "APLA @base"))
         self.assertEqual(root["filament_id"], "AX01")  # not re-minted
@@ -1671,7 +1446,7 @@ class TestCli(unittest.TestCase):
                                                         "APLA @P1"))
 
     def test_filament_id_only_inserts_no_setting_id(self):
-        rc, out = self.t.cli("--generate", "--filament-id")
+        rc, out = self.t.cli("generate-id", "--filament-id")
         self.assertEqual(rc, 0, out)
         root = load_json_file(self.t.preset_path("VendorA", "APLA @base"))
         self.assertEqual(root["filament_id"],
@@ -1680,24 +1455,42 @@ class TestCli(unittest.TestCase):
             self.assertNotIn(
                 "setting_id", load_json_file(self.t.preset_path("VendorA", name)))
 
-    def test_check_mode_returns_1_on_errors(self):
-        # What CI keys off: --check exits nonzero when the tree does not match
-        # the snapshot it is validated against.
+    def test_check_returns_1_on_errors(self):
+        # What CI keys off: check exits nonzero when the tree breaks a rule, here
+        # the baseline's ids that are not minted.
         before = self.t.bytes_map()
-        rc, out = self.t.cli("--check")
+        rc, out = self.t.cli("check")
         self.assertEqual(rc, 1)
-        self.assertIn("error(s)", out)
-        self.assertEqual(self.t.bytes_map(), before)  # --check never writes
+        self.assertIn("Files with errors", out)
+        self.assertEqual(self.t.bytes_map(), before)  # check never writes
+
+    def test_check_vendor_narrows_the_per_vendor_pass(self):
+        # check_profile.sh passes --vendor to this command, so it has to be
+        # accepted -- and it must narrow only the per-vendor half.
+        rc, out = self.t.cli("check", "--vendor", "VendorA")
+        self.assertEqual(rc, 1, out)          # the tree-wide checks still ran
+        self.assertIn("Checked vendors     : 1", out)
+
+    def test_an_empty_vendor_means_every_vendor(self):
+        # check_profile.sh cannot expand an empty array under set -u, so it
+        # passes --vendor "" to mean "all of them".
+        _rc, scoped = self.t.cli("check", "--vendor", "")
+        _rc, unscoped = self.t.cli("check")
+        self.assertEqual(scoped, unscoped)
 
     def test_removed_and_conflicting_flags_are_rejected(self):
-        for argv in (["--remint", "VendorA"],          # removed mode
-                     ["--mint", "A/B/C"],              # removed mode
-                     ["--drop-redundant-ids", "VendorA"],  # removed mode
-                     ["--assign"],                     # removed mode
-                     ["--generate", "--check"],        # two modes
-                     ["--vendor", "VendorA"],          # narrowing without a mode
-                     ["--filament-id"],                # narrowing without a mode
-                     ["--check", "--vendor", "VendorA"]):  # narrowing on --check
+        for argv in (["--remint", "VendorA"],              # removed mode
+                     ["--generate"],                       # the pre-subcommand flag
+                     ["--check"],                          # the pre-subcommand flag
+                     ["--update-snapshot"],                # the pre-subcommand flag
+                     ["nonsense"],                         # not a command
+                     ["update-snapshot"],                  # removed command
+                     ["generate-id", "--filament-id", "--setting-id"],
+                     ["check", "--materials"],             # removed flag
+                     ["check", "--obsolete-keys"],         # removed flag
+                     ["check", "--snapshot", "x"],         # removed flag
+                     ["check", "--filament-id"],           # generate-id's option
+                     ["normalize", "--profile-type", "nozzle"]):  # not a profile type
             with self.subTest(argv=argv):
                 with self.assertRaises(SystemExit) as cm, \
                         contextlib.redirect_stdout(io.StringIO()), \
@@ -1712,7 +1505,7 @@ class TestCli(unittest.TestCase):
 
 @unittest.skipUnless(os.path.isdir(REAL_PROFILES), "resources/profiles not present")
 class TestRealTree(unittest.TestCase):
-    def test_shipped_snapshot_matches_tree(self):
+    def test_shipped_filament_ids_pass(self):
         buf = io.StringIO()
         with contextlib.redirect_stdout(buf):
             errors = afi.check_filament_ids(REAL_PROFILES)
@@ -1722,7 +1515,7 @@ class TestRealTree(unittest.TestCase):
         # The exact CI invocation, return code included.
         buf = io.StringIO()
         with contextlib.redirect_stdout(buf):
-            rc = afi.main(["--check"])
+            rc = afi.main(["check"])
         self.assertEqual(rc, 0, buf.getvalue())
 
     def test_every_instantiated_filament_resolves_an_id(self):
@@ -1774,10 +1567,10 @@ class TestReviewFixes(OfCleanTreeCase):
         self.assertIn(path, str(caught.exception))
         self.assertIn("test edit", str(caught.exception))
 
-    def test_check3_skips_of_id_inherited_from_other_vendor(self):
+    def test_check2_accepts_an_of_id_inherited_from_another_vendor(self):
         # An OFL filament carries its own minted OF id and a vendor tunes it
-        # correctly (same base name, non-empty printers). The new claim must
-        # trip only the snapshot gate, never mint conformance.
+        # correctly (same base name, non-empty printers): the id it inherits is
+        # the mint of its own triple.
         fid = afi.generate_filament_id("Generic", "PLA", "Generic PLA Matte")
         self.t.write_preset(OFL, preset("Generic PLA Matte @base", filament_id=fid,
                                         instantiation=False,
@@ -1786,22 +1579,13 @@ class TestReviewFixes(OfCleanTreeCase):
         self.t.write_preset(OFL, preset("Generic PLA Matte @System",
                                         inherits="Generic PLA Matte @base",
                                         compatible_printers=[]))
-        rc, _ = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
         self.t.write_preset("VendorA", preset("Generic PLA Matte @P1",
                                               inherits="Generic PLA Matte @System",
                                               compatible_printers=["P1 0.4 nozzle"]))
         errors, out = self.t.check()
-        self.assertNotIn("does not match the mint", out)
-        self.assertIn("not sanctioned", out)
-        self.assertEqual(errors, 1, out)
-        # After sanctioning the claim the tree is fully green again.
-        rc, _ = self.t.update_snapshot()
-        self.assertEqual(rc, 0)
-        errors, out = self.t.check()
         self.assertEqual(errors, 0, out)
 
-    def test_check3c_prints_expected_mint(self):
+    def test_check2c_prints_expected_mint(self):
         self.t.write_preset("VendorA", preset("Orphan PLA @P1",
                                               compatible_printers=["P1 0.4 nozzle"],
                                               filament_vendor="OV",
diff --git a/scripts/tests/test_profile_tool.py b/scripts/tests/test_profile_tool.py
new file mode 100644
index 0000000000..29b62b693e
--- /dev/null
+++ b/scripts/tests/test_profile_tool.py
@@ -0,0 +1,942 @@
+#!/usr/bin/env python3
+"""Tests for the tree-maintenance half of scripts/orca_profile_tool.py: the
+normalize, trim, update-index and check commands, and the subcommand dispatch that
+reaches them (stdlib unittest, no external deps).
+
+The id halves are covered by test_filament_id.py and test_setting_id.py.
+
+Run from the repo root:  python -m unittest discover -s scripts/tests -v
+"""
+
+import contextlib
+import io
+import json
+import os
+import re
+import shutil
+import sys
+import tempfile
+import unittest
+
+sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+
+import orca_profile_tool as apt  # noqa: E402
+
+REPO_ROOT = os.path.abspath(os.path.join(os.path.dirname(__file__), "..", ".."))
+REAL_PROFILES = os.path.join(REPO_ROOT, "resources", "profiles")
+
+
+class Tree:
+    """A throwaway resources/profiles-shaped directory built one file at a time.
+
+    Nothing is written implicitly: index entries are added by index(), so a test
+    can produce exactly the mismatch it is about (a file no list references, a
+    list naming a file that is not there, a preset whose name disagrees with the
+    index).
+    """
+
+    def __init__(self):
+        self.dir = tempfile.mkdtemp(prefix="profile_tool_test_")
+        self.profiles = os.path.join(self.dir, "profiles")
+        os.makedirs(self.profiles)
+
+    def cleanup(self):
+        shutil.rmtree(self.dir, ignore_errors=True)
+
+    def index_path(self, vendor):
+        return os.path.join(self.profiles, vendor + ".json")
+
+    def add_vendor(self, vendor):
+        for sub in apt.PROFILE_SUBDIRS:
+            os.makedirs(os.path.join(self.profiles, vendor, sub), exist_ok=True)
+        if not os.path.exists(self.index_path(vendor)):
+            self.write_index(vendor, {"name": vendor, "version": "01.00.00.00"})
+        return self
+
+    def write_index(self, vendor, index):
+        with open(self.index_path(vendor), "w", encoding="utf-8", newline="\n") as f:
+            json.dump(index, f, indent=4, ensure_ascii=False)
+            f.write("\n")
+
+    def read_index(self, vendor):
+        with open(self.index_path(vendor), encoding="utf-8-sig") as f:
+            return json.load(f)
+
+    def index(self, vendor, section, name, sub_path):
+        index = self.read_index(vendor)
+        index.setdefault(section + "_list", []).append(
+            {"name": name, "sub_path": sub_path})
+        self.write_index(vendor, index)
+
+    def path(self, vendor, rel):
+        return os.path.join(self.profiles, vendor, rel.replace("/", os.sep))
+
+    def write(self, vendor, rel, data):
+        """Write a preset at <vendor>/<rel>; returns its path."""
+        self.add_vendor(vendor)
+        path = self.path(vendor, rel)
+        os.makedirs(os.path.dirname(path), exist_ok=True)
+        with open(path, "w", encoding="utf-8", newline="\n") as f:
+            json.dump(data, f, indent=4, ensure_ascii=False)
+            f.write("\n")
+        return path
+
+    def write_raw(self, vendor, rel, raw):
+        self.add_vendor(vendor)
+        path = self.path(vendor, rel)
+        os.makedirs(os.path.dirname(path), exist_ok=True)
+        with open(path, "wb") as f:
+            f.write(raw)
+        return path
+
+    def read(self, vendor, rel):
+        with open(self.path(vendor, rel), encoding="utf-8-sig") as f:
+            return json.load(f)
+
+    def raw(self, vendor, rel):
+        with open(self.path(vendor, rel), "rb") as f:
+            return f.read()
+
+    def bytes_map(self):
+        """Every file in the tree -> its bytes, for "nothing was written" asserts."""
+        out = {}
+        for root, dirs, files in os.walk(self.profiles):
+            dirs.sort()
+            for name in sorted(files):
+                path = os.path.join(root, name)
+                with open(path, "rb") as f:
+                    out[os.path.relpath(path, self.profiles)] = f.read()
+        return out
+
+
+class TreeCase(unittest.TestCase):
+    def setUp(self):
+        self.t = Tree()
+        self.addCleanup(self.t.cleanup)
+
+    def run_command(self, *argv):
+        """main() against this tree, capturing stdout."""
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            rc = apt.main([*argv, "--profiles", self.t.profiles])
+        return rc, buf.getvalue()
+
+
+# ---------------------------------------------------------------------------
+# normalize
+# ---------------------------------------------------------------------------
+
+class TestObsoleteKeys(unittest.TestCase):
+    def test_obsolete_keys_match_the_loader_ignore_set(self):
+        path = os.path.join(REPO_ROOT, "src", "libslic3r", "PrintConfig.cpp")
+        with open(path, encoding="utf-8") as f:
+            source = f.read()
+        match = re.search(
+            r"void PrintConfigDef::handle_legacy\(.*?"
+            r"static\s+std::set<std::string>\s+ignore\s*=\s*\{(.*?)\};",
+            source, re.DOTALL)
+        self.assertIsNotNone(match, "Could not locate the loader's obsolete-key set")
+        keys = re.sub(r"//[^\n]*|/\*.*?\*/", "", match.group(1), flags=re.DOTALL)
+        self.assertEqual(apt.OBSOLETE_KEYS, set(re.findall(r'"([^"\n]+)"', keys)))
+
+
+class TestNormalize(TreeCase):
+    def test_a_missing_type_is_filled_in_from_the_directory(self):
+        self.t.write("V", "filament/A.json", {"name": "A"})
+        self.t.write("V", "process/B.json", {"name": "B"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.read("V", "filament/A.json")["type"], "filament")
+        self.assertEqual(self.t.read("V", "process/B.json")["type"], "process")
+
+    def test_the_machine_folder_splits_on_the_preset_name(self):
+        # Orca keeps machine models in machine/ next to the nozzle variants that
+        # are machines; only the name tells them apart.
+        self.t.write("V", "machine/M.json", {"name": "V Printer"})
+        self.t.write("V", "machine/N.json", {"name": "V Printer 0.4 nozzle"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.read("V", "machine/M.json")["type"], "machine_model")
+        self.assertEqual(self.t.read("V", "machine/N.json")["type"], "machine")
+
+    def test_dropped_keys_go_and_filament_vectors_are_arrayified(self):
+        self.t.write("V", "filament/A.json", {
+            "type": "filament", "name": "A", "version": "1.2.3",
+            "is_custom_defined": "1", "filament_type": "PLA",
+            "filament_vendor": "AV", "travel_speed": 200,
+            "filament_load_time": ["15"], "filament_unload_time": "0"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        data = self.t.read("V", "filament/A.json")
+        self.assertNotIn("version", data)
+        self.assertNotIn("is_custom_defined", data)
+        self.assertNotIn("travel_speed", data)   # a process setting, not a filament one
+        self.assertNotIn("filament_load_time", data)
+        self.assertNotIn("filament_unload_time", data)
+        self.assertEqual(data["filament_type"], ["PLA"])
+        self.assertEqual(data["filament_vendor"], ["AV"])
+
+    def test_obsolete_keys_are_removed_from_every_profile_type(self):
+        for sub in ("filament", "process", "machine"):
+            with self.subTest(profile_type=sub):
+                expected = {"type": sub, "name": "A"}
+                self.t.write("V", f"{sub}/A.json", {
+                    **expected, "silent_mode": "", "adaptive_layer_height": "0",
+                    "anisotropic_surfaces": "1", "filament_load_time": ["0"],
+                    "filament_unload_time": "0"})
+                rc, out = self.run_command("normalize")
+                self.assertEqual(rc, 0, out)
+                self.assertEqual(self.t.read("V", f"{sub}/A.json"), expected)
+        before = self.t.bytes_map()
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("0 profile(s) normalized", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_the_larger_extruder_clearance_wins(self):
+        # Keeping the smaller one would licence a toolhead collision.
+        self.t.write("V", "machine/M.json", {
+            "type": "machine", "name": "M 0.4 nozzle",
+            "extruder_clearance_radius": "45", "extruder_clearance_max_radius": "68"})
+        self.t.write("V", "machine/N.json", {
+            "type": "machine", "name": "N 0.4 nozzle",
+            "extruder_clearance_radius": "68", "extruder_clearance_max_radius": "45"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        kept = self.t.read("V", "machine/M.json")
+        self.assertNotIn("extruder_clearance_radius", kept)
+        self.assertEqual(kept["extruder_clearance_max_radius"], "68")
+        kept = self.t.read("V", "machine/N.json")
+        self.assertNotIn("extruder_clearance_max_radius", kept)
+        self.assertEqual(kept["extruder_clearance_radius"], "68")
+
+    def test_a_rewritten_file_leads_with_its_identifying_keys(self):
+        self.t.write("V", "filament/A.json", {
+            "filament_cost": [20], "name": "A", "instantiation": "true",
+            "inherits": "base", "version": "1"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        keys = list(self.t.read("V", "filament/A.json"))
+        self.assertEqual(keys[:4], ["type", "name", "inherits", "instantiation"])
+
+    def test_a_conforming_tree_is_left_byte_identical(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        # These used to be misclassified as obsolete: one is active, the other
+        # is a legacy alias that still supplies the toolhead clearance on load.
+        self.t.write("V", "machine/M.json", {
+            "type": "machine", "name": "M", "extruder_type": ["Direct Drive"],
+            "extruder_clearance_max_radius": "68", "machine_load_filament_time": "15",
+            "machine_unload_filament_time": "10"})
+        self.t.write("V", "process/P.json", {
+            "type": "process", "name": "P", "travel_speed": "200",
+            "top_surface_fill_order": "outward"})
+        before = self.t.bytes_map()
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_force_rewrites_even_a_conforming_file(self):
+        self.t.write_raw("V", "filament/A.json",
+                         b'{"name":"A","type":"filament"}')
+        rc, out = self.run_command("normalize", "--force")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.raw("V", "filament/A.json"),
+                         b'{\n\t"type": "filament",\n\t"name": "A"\n}\n')
+
+    def test_dry_run_writes_nothing(self):
+        self.t.write("V", "filament/A.json", {"name": "A", "bed_temperature": ["60"]})
+        before = self.t.bytes_map()
+        rc, out = self.run_command("normalize", "--dry-run")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("would be", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_profile_type_confines_the_run(self):
+        self.t.write("V", "filament/A.json", {"name": "A"})
+        self.t.write("V", "process/B.json", {"name": "B"})
+        rc, out = self.run_command("normalize", "--profile-type", "filament")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.read("V", "filament/A.json")["type"], "filament")
+        self.assertNotIn("type", self.t.read("V", "process/B.json"))
+
+    def test_an_unreadable_profile_is_reported_not_swallowed(self):
+        self.t.write_raw("V", "filament/A.json", b"{ not json")
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 1, out)
+        self.assertIn("ERROR", out)
+        self.assertEqual(self.t.raw("V", "filament/A.json"), b"{ not json")
+
+    def test_a_directory_without_an_index_is_not_a_bundle(self):
+        # resources/profiles also holds non-bundle entries (blacklist.json, the
+        # untracked user/ directory); only a directory WITH an index is a vendor.
+        stray = os.path.join(self.t.profiles, "user", "filament")
+        os.makedirs(stray)
+        with open(os.path.join(stray, "A.json"), "wb") as f:
+            f.write(b'{"name": "A"}')
+        self.t.write("V", "filament/A.json", {"name": "A"})
+        rc, out = self.run_command("normalize")
+        self.assertEqual(rc, 0, out)
+        self.assertFalse(os.path.exists(os.path.join(self.t.profiles, "user.json")))
+        with open(os.path.join(stray, "A.json"), "rb") as f:
+            self.assertEqual(f.read(), b'{"name": "A"}')
+
+
+# ---------------------------------------------------------------------------
+# trim
+# ---------------------------------------------------------------------------
+
+class TestTrim(TreeCase):
+    def bundle(self):
+        self.t.write("V", "filament/Listed.json",
+                     {"type": "filament", "name": "Listed"})
+        self.t.index("V", "filament", "Listed", "filament/Listed.json")
+        return self.t
+
+    def test_an_unindexed_preset_is_removed(self):
+        self.bundle().write("V", "filament/Orphan.json",
+                            {"type": "filament", "name": "Orphan"})
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        self.assertTrue(os.path.exists(self.t.path("V", "filament/Listed.json")))
+        self.assertFalse(os.path.exists(self.t.path("V", "filament/Orphan.json")))
+
+    def test_a_dotted_sub_path_still_names_its_file(self):
+        # Index entries are hand-written; "filament/./X.json" is the same file.
+        self.bundle()
+        self.t.write("V", "filament/Dotted.json",
+                     {"type": "filament", "name": "Dotted"})
+        self.t.index("V", "filament", "Dotted", "filament/./Dotted.json")
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        self.assertTrue(os.path.exists(self.t.path("V", "filament/Dotted.json")))
+
+    def test_an_unparsable_file_is_kept_and_reported(self):
+        self.bundle().write_raw("V", "filament/Broken.json", b"{ not json")
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("WARNING", out)
+        self.assertTrue(os.path.exists(self.t.path("V", "filament/Broken.json")))
+
+    def test_a_data_file_is_not_a_preset(self):
+        self.bundle().write("V", "filament/filaments_color_codes.json",
+                            {"data": [], "total": 0})
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        self.assertTrue(os.path.exists(
+            self.t.path("V", "filament/filaments_color_codes.json")))
+
+    def test_an_inherited_base_is_kept_and_reported(self):
+        # Neither file loads -- the loader only reads indexed sub_paths -- but
+        # deleting the parent destroys the only record of what the indexed child
+        # was written against, so that is a maintainer's call, not trim's.
+        self.bundle()
+        self.t.write("V", "machine/base.json",
+                     {"type": "machine", "name": "V base"})
+        self.t.write("V", "machine/mid.json",
+                     {"type": "machine", "name": "V mid", "inherits": "V base"})
+        self.t.write("V", "machine/M.json",
+                     {"type": "machine", "name": "M 0.4 nozzle", "inherits": "V mid"})
+        self.t.index("V", "machine", "M 0.4 nozzle", "machine/M.json")
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        # ... and the chain is followed: mid rescues base in a second pass.
+        self.assertTrue(os.path.exists(self.t.path("V", "machine/mid.json")))
+        self.assertTrue(os.path.exists(self.t.path("V", "machine/base.json")))
+        self.assertIn("inherited from", out)
+
+    def test_a_stale_copy_of_an_indexed_profile_is_removed(self):
+        # "inherits" resolves by preset name, so the indexed base is the parent the
+        # child actually gets; the unindexed twin is a leftover the loader never
+        # reaches, and being named in an inherits does not earn it a reprieve.
+        self.bundle()
+        self.t.write("V", "machine/HSN/base.json",
+                     {"type": "machine", "name": "V base"})
+        self.t.index("V", "machine", "V base", "machine/HSN/base.json")
+        self.t.write("V", "machine/base.json",
+                     {"type": "machine", "name": "V base"})
+        self.t.write("V", "machine/M.json",
+                     {"type": "machine", "name": "M 0.4 nozzle", "inherits": "V base"})
+        self.t.index("V", "machine", "M 0.4 nozzle", "machine/M.json")
+        rc, out = self.run_command("trim")
+        self.assertEqual(rc, 0, out)
+        self.assertTrue(os.path.exists(self.t.path("V", "machine/HSN/base.json")))
+        self.assertFalse(os.path.exists(self.t.path("V", "machine/base.json")))
+        self.assertNotIn("WARNING", out)
+        self.assertIn('machine/HSN/base.json is the profile named "V base"', out)
+
+    def test_dry_run_deletes_nothing(self):
+        self.bundle().write("V", "filament/Orphan.json",
+                            {"type": "filament", "name": "Orphan"})
+        before = self.t.bytes_map()
+        rc, out = self.run_command("trim", "--dry-run")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("would be removed", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+
+# ---------------------------------------------------------------------------
+# update-index
+# ---------------------------------------------------------------------------
+
+class TestUpdateIndex(TreeCase):
+    def test_every_profile_on_disk_lands_in_its_own_section(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.t.write("V", "process/B.json", {"type": "process", "name": "B"})
+        self.t.write("V", "machine/M.json", {"type": "machine", "name": "M"})
+        self.t.write("V", "machine/MM.json", {"type": "machine_model", "name": "MM"})
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 0, out)
+        index = self.t.read_index("V")
+        self.assertEqual(index["filament_list"],
+                         [{"name": "A", "sub_path": "filament/A.json"}])
+        self.assertEqual(index["process_list"],
+                         [{"name": "B", "sub_path": "process/B.json"}])
+        self.assertEqual(index["machine_list"],
+                         [{"name": "M", "sub_path": "machine/M.json"}])
+        self.assertEqual(index["machine_model_list"],
+                         [{"name": "MM", "sub_path": "machine/MM.json"}])
+
+    def test_parents_are_listed_before_their_children(self):
+        # The loader resolves inherits in one pass over the list.
+        for name, parent in (("C", "B"), ("A", None), ("B", "A")):
+            data = {"type": "filament", "name": name}
+            if parent:
+                data["inherits"] = parent
+            self.t.write("V", f"filament/{name}.json", data)
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual([e["name"] for e in self.t.read_index("V")["filament_list"]],
+                         ["A", "B", "C"])
+        # inherits is ordering input only; it never lands in the index.
+        for entry in self.t.read_index("V")["filament_list"]:
+            self.assertEqual(sorted(entry), ["name", "sub_path"])
+
+    def test_a_profile_with_no_usable_type_is_reported_not_dropped(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.t.write("V", "filament/B.json", {"name": "B"})
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 1, out)
+        self.assertIn("cannot be indexed", out)
+        self.assertIn("filament/B.json", out)
+
+    def test_two_profiles_claiming_one_name_leave_the_index_alone(self):
+        # The bundle holds one profile per name, so a rebuild would pick a winner by
+        # directory order and drop the other without a word.
+        self.t.write("V", "machine/base.json", {"type": "machine", "name": "base"})
+        self.t.write("V", "machine/HSN/base.json", {"type": "machine", "name": "base"})
+        self.t.index("V", "machine", "base", "machine/HSN/base.json")
+        before = self.t.bytes_map()
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 1, out)
+        self.assertIn('2 profiles are named "base"', out)
+        self.assertIn("machine/base.json", out)
+        self.assertIn("machine/HSN/base.json", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_profile_type_rebuilds_only_that_section(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.t.write("V", "process/B.json", {"type": "process", "name": "B"})
+        rc, out = self.run_command("update-index", "--profile-type", "filament")
+        self.assertEqual(rc, 0, out)
+        index = self.t.read_index("V")
+        self.assertEqual([e["name"] for e in index["filament_list"]], ["A"])
+        self.assertNotIn("process_list", index)
+
+    def test_an_up_to_date_index_is_left_byte_identical(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.run_command("update-index")
+        before = self.t.bytes_map()
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_dry_run_writes_nothing(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        before = self.t.bytes_map()
+        rc, out = self.run_command("update-index", "--dry-run")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("would be rebuilt", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_a_json_file_with_no_bundle_is_never_touched(self):
+        # resources/profiles/blacklist.json is a .json with no directory beside
+        # it. Enumerating vendors by stem once wrote four empty *_list keys into it.
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        stray = os.path.join(self.t.profiles, "blacklist.json")
+        with open(stray, "wb") as f:
+            f.write(b'{"filament": ["GFSA03"]}')
+        rc, out = self.run_command("update-index")
+        self.assertEqual(rc, 0, out)
+        with open(stray, "rb") as f:
+            self.assertEqual(f.read(), b'{"filament": ["GFSA03"]}')
+
+
+# ---------------------------------------------------------------------------
+# check
+# ---------------------------------------------------------------------------
+
+class TestCheck(TreeCase):
+    def bundle(self):
+        """A bundle that passes every per-vendor check."""
+        self.t.write("V", "filament/A.json", {
+            "type": "filament", "name": "A", "instantiation": "true",
+            "filament_id": "OFaaaaaa", "filament_type": ["PLA"],
+            "filament_vendor": ["AV"], "compatible_printers": ["M 0.4 nozzle"],
+            "setting_id": apt.generate_preset_setting_id("V", "filament", "A")})
+        self.t.index("V", "filament", "A", "filament/A.json")
+        return self.t
+
+    def per_vendor_errors(self, *argv):
+        """Run the per-vendor checks alone, which is what --vendor narrows."""
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors = apt.check_filament_compatible_printers(self.t.profiles, "V")
+            name_errors, _warn = apt.check_name_consistency(self.t.profiles, "V")
+            errors += name_errors
+            errors += apt.check_vector_type_keys(self.t.profiles, "V")
+            errors += apt.check_filament_id_length(self.t.profiles, "V")
+            conflict, _warn = apt.check_conflict_keys(self.t.profiles, "V")
+            errors += conflict
+            materials, _warn = apt.check_machine_default_materials(self.t.profiles, "V")
+            errors += materials
+        return errors, buf.getvalue()
+
+    def test_a_clean_bundle_reports_nothing(self):
+        self.bundle()
+        errors, out = self.per_vendor_errors()
+        self.assertEqual(errors, 0, out)
+
+    def test_an_instantiated_filament_needs_compatible_printers(self):
+        self.bundle().write("V", "filament/B.json", {
+            "type": "filament", "name": "B", "instantiation": "true"})
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("'compatible_printers' missing", out)
+
+    def test_a_library_filament_may_leave_compatible_printers_empty(self):
+        # The shared library is exempt from that rule and nothing else.
+        self.t.write(apt.OFL, "filament/A.json",
+                     {"type": "filament", "name": "A", "instantiation": "true"})
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors = apt.check_filament_compatible_printers(self.t.profiles, apt.OFL)
+        self.assertEqual(errors, 0, buf.getvalue())
+
+    def test_the_library_is_checked_like_any_other_bundle(self):
+        # A file the library's own index does not reference must fail plain
+        # `check`, now that the per-vendor pass no longer skips it.
+        self.t.write(apt.OFL, "filament/Stray.json",
+                     {"type": "filament", "name": "Stray"})
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)
+        self.assertIn(f"{apt.OFL}/filament/Stray.json: no {apt.OFL}.json list "
+                      f"references it", out)
+
+    def test_a_duplicate_key_is_an_error(self):
+        self.bundle().write_raw("V", "filament/B.json",
+                                b'{"type":"filament","name":"B","name":"B2"}')
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("Duplicate key", out)
+
+    def test_the_index_and_the_file_must_agree_on_the_name(self):
+        self.bundle()
+        self.t.write("V", "filament/C.json", {"type": "filament", "name": "Other"})
+        self.t.index("V", "filament", "C", "filament/C.json")
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("name mismatch", out)
+
+    def test_an_index_entry_with_no_file_is_an_error(self):
+        self.bundle()
+        self.t.index("V", "filament", "Gone", "filament/Gone.json")
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("Missing sub profile", out)
+
+    def test_a_vector_option_may_not_be_a_scalar(self):
+        self.bundle().write("V", "filament/B.json", {
+            "type": "filament", "name": "B", "filament_type": "PLA"})
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("must be an array", out)
+
+    def test_renamed_and_old_option_may_not_co_exist(self):
+        self.bundle().write("V", "machine/M.json", {
+            "type": "machine", "name": "M 0.4 nozzle",
+            "extruder_clearance_radius": "45", "extruder_clearance_max_radius": "68"})
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("Conflict keys", out)
+
+    def test_the_length_rule_only_binds_indexed_presets(self):
+        # A file the index never loads cannot break AMS matching, and some
+        # bundles ship such orphans from before the rule existed.
+        self.bundle().write("V", "filament/Long.json", {
+            "type": "filament", "name": "Long", "filament_id": "OFtoolongforams"})
+        errors, out = self.per_vendor_errors()
+        self.assertEqual(errors, 0, out)
+        self.t.index("V", "filament", "Long", "filament/Long.json")
+        errors, out = self.per_vendor_errors()
+        self.assertGreater(errors, 0)
+        self.assertIn("Filament id too long", out)
+
+    def test_obsolete_key_warnings_exclude_active_and_renamed_options(self):
+        self.bundle().write("V", "filament/B.json", {
+            "type": "filament", "name": "B", "silent_mode": "0",
+            "anisotropic_surfaces": "0", "extruder_type": ["Direct Drive"],
+            "extruder_clearance_max_radius": "68"})
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            warnings = apt.check_obsolete_keys(self.t.profiles, "V")
+        self.assertEqual(warnings, 2)
+        self.assertIn("Obsolete key", buf.getvalue())
+
+    def test_obsolete_key_warnings_run_without_a_flag(self):
+        self.t.write("V", "filament/A.json", {
+            "type": "filament", "name": "A", "silent_mode": "0"})
+        self.run_command("update-index")
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)  # normalization also rejects the obsolete key
+        self.assertIn("Obsolete key: 'silent_mode' found in V/filament/A.json", out)
+        self.assertIn("Files with warnings : 1", out)
+
+    def test_a_default_material_must_exist_somewhere(self):
+        self.bundle().write("V", "machine/M.json", {
+            "type": "machine", "name": "M 0.4 nozzle",
+            "default_materials": "A;Nope"})
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors, _warn = apt.check_machine_default_materials(self.t.profiles, "V")
+        self.assertEqual(errors, 1)
+        self.assertIn("'Nope'", buf.getvalue())
+
+    def test_a_default_material_fails_check_without_a_flag(self):
+        # The reference check is part of the default run, not an opt-in: a
+        # dangling name has to fail plain `check`.
+        self.bundle()
+        self.t.write("V", "machine/M.json", {
+            "type": "machine", "name": "M 0.4 nozzle",
+            "default_filament_profile": ["A", "Nope"]})
+        self.t.index("V", "machine", "M 0.4 nozzle", "machine/M.json")
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)
+        self.assertIn("Missing filament profile: 'Nope'", out)
+
+    def test_the_stray_user_directory_is_not_a_vendor(self):
+        # A local validator run leaves resources/profiles/user/ behind; an
+        # unscoped check must not count it as a bundle and warn about it.
+        self.bundle()
+        for sub in apt.PROFILE_SUBDIRS:
+            os.makedirs(os.path.join(self.t.profiles, apt.USER_DIR, "default", sub))
+        _rc, out = self.run_command("check")
+        self.assertIn("Checked vendors     : 1", out)
+        self.assertNotIn("user", out)
+
+    def names(self, vendor="V"):
+        """The preset name check for one bundle, which is what --vendor narrows."""
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors = apt.check_preset_name_uniqueness(self.t.profiles, vendor)
+        return errors, buf.getvalue()
+
+    def test_one_bundle_may_not_hold_two_profiles_of_a_name(self):
+        self.bundle().write("V", "filament/dup.json", {
+            "type": "filament", "name": "A", "instantiation": "false"})
+        errors, out = self.names()
+        self.assertEqual(errors, 1, out)
+        self.assertIn('V has 2 filament profiles named "A"', out)
+
+    def test_an_unindexed_twin_counts_as_a_duplicate(self):
+        # The case this check was written for: a stale copy of a base profile in
+        # machine/, which no per-vendor check walked, one index edit away from
+        # silently deciding which of the two a whole bundle inherits from.
+        self.bundle()
+        self.t.write("V", "machine/HSN/base.json",
+                     {"type": "machine", "name": "V base"})
+        self.t.index("V", "machine", "V base", "machine/HSN/base.json")
+        self.t.write("V", "machine/base.json", {"type": "machine", "name": "V base"})
+        errors, out = self.names()
+        self.assertEqual(errors, 1, out)
+        self.assertIn("machine/HSN/base.json", out)
+        self.assertIn("machine/base.json", out)
+
+    def test_one_name_in_two_types_is_not_a_clash(self):
+        self.bundle()
+        self.t.write("V", "process/same.json", {"type": "process", "name": "A"})
+        errors, out = self.names()
+        self.assertEqual(errors, 0, out)
+
+    def test_a_name_is_per_bundle_not_global(self):
+        # fdm_machine_common exists in 60 shipped bundles; the name is scoped to the
+        # bundle that resolves it, so sharing one across vendors is not a clash.
+        for vendor in ("V", "W"):
+            self.t.write(vendor, "machine/common.json",
+                         {"type": "machine", "name": "fdm_machine_common"})
+            self.t.index(vendor, "machine", "fdm_machine_common", "machine/common.json")
+        for vendor in ("V", "W"):
+            errors, out = self.names(vendor)
+            self.assertEqual(errors, 0, out)
+
+    def coverage(self, vendor="V"):
+        """The index-coverage check for one bundle: (errors, gaps, output)."""
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors, gaps = apt.check_index_coverage(self.t.profiles, vendor)
+        return errors, gaps, buf.getvalue()
+
+    def test_a_file_no_list_references_is_an_error(self):
+        self.bundle().write("V", "filament/Stray.json",
+                            {"type": "filament", "name": "Stray"})
+        errors, gaps, out = self.coverage()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["unindexed"], 1)
+        self.assertIn("no V.json list references it", out)
+
+    def test_a_file_with_no_type_is_its_own_category(self):
+        # update-index cannot place it, so "add it to the index" is not the remedy.
+        self.bundle().write("V", "filament/Stray.json", {"name": "Stray"})
+        errors, gaps, out = self.coverage()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["unindexable"], 1)
+        self.assertIn("declares no profile type", out)
+
+    def test_an_unparsable_unlisted_file_is_reported_too(self):
+        self.bundle().write_raw("V", "filament/Broken.json", b"{ not json")
+        errors, gaps, out = self.coverage()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["unindexable"], 1)
+
+    def test_a_dotted_sub_path_still_counts_as_listed(self):
+        self.bundle()
+        self.t.write("V", "filament/Dotted.json",
+                     {"type": "filament", "name": "Dotted"})
+        self.t.index("V", "filament", "Dotted", "filament/./Dotted.json")
+        errors, _gaps, out = self.coverage()
+        self.assertEqual(errors, 0, out)
+
+    def test_a_data_file_is_not_expected_in_the_index(self):
+        self.bundle().write("V", "filament/filaments_color_codes.json",
+                            {"data": [], "total": 0})
+        errors, _gaps, out = self.coverage()
+        self.assertEqual(errors, 0, out)
+
+    def test_a_bundle_with_no_index_is_left_to_the_name_check(self):
+        # Every file unlisted because there is no list at all is one problem, not
+        # one per file; check_name_consistency reports the missing index.
+        self.t.write("W", "filament/A.json", {"type": "filament", "name": "A"})
+        os.remove(self.t.index_path("W"))
+        errors, _gaps, out = self.coverage("W")
+        self.assertEqual(errors, 0, out)
+
+    def test_the_remedy_is_printed_once_not_once_per_file(self):
+        self.bundle()
+        for n in range(5):
+            self.t.write("V", f"filament/Stray{n}.json",
+                         {"type": "filament", "name": f"Stray{n}"})
+        self.t.write("V", "filament/NoType.json", {"name": "NoType"})
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)
+        self.assertEqual(out.count("update-index\" to add them"), 1, out)
+        self.assertEqual(out.count("or delete them"), 1, out)
+        self.assertIn("5 unreferenced file(s)", out)
+        self.assertIn("1 unreferenced file(s)", out)
+
+    def test_setting_id_uniqueness_is_tree_wide(self):
+        # Two presets sharing vendor/type/name mint one id, so the collision
+        # only shows up in a pass that has seen the whole tree.
+        shared = apt.generate_preset_setting_id("V", "filament", "A")
+        for rel in ("filament/A.json", "filament/nested/A.json"):
+            self.t.write("V", rel, {"type": "filament", "name": "A",
+                                    "instantiation": "true", "setting_id": shared})
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors = apt.check_setting_id_uniqueness(self.t.profiles)
+        self.assertGreater(errors, 0)
+        self.assertIn("globally unique", buf.getvalue())
+
+    def test_a_base_profile_must_not_carry_a_setting_id(self):
+        self.t.write("V", "filament/base.json", {
+            "type": "filament", "name": "base", "instantiation": "false",
+            "setting_id": apt.generate_preset_setting_id("V", "filament", "base")})
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors = apt.check_setting_id_uniqueness(self.t.profiles)
+        self.assertEqual(errors, 1)
+        self.assertIn("must not have a", buf.getvalue())
+
+
+# ---------------------------------------------------------------------------
+# check: normalize and update-index would change nothing
+# ---------------------------------------------------------------------------
+
+class TestNormalized(TreeCase):
+    """The pass that holds a bundle to the shape normalize and update-index write."""
+
+    def normalize(self):
+        """Put the tree in that shape, the way a contributor is told to."""
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            apt.main(["normalize", "--profiles", self.t.profiles])
+            apt.main(["update-index", "--profiles", self.t.profiles])
+        return buf.getvalue()
+
+    def normalized(self, vendor="V"):
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            errors, gaps = apt.check_normalized(self.t.profiles, vendor)
+        return errors, gaps, buf.getvalue()
+
+    def test_a_bundle_the_two_commands_just_wrote_reports_nothing(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.t.write("V", "process/B.json", {"type": "process", "name": "B"})
+        self.normalize()
+        errors, _gaps, out = self.normalized()
+        self.assertEqual(errors, 0, out)
+
+    def test_a_profile_fix_would_rewrite_is_an_error(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        self.normalize()
+        # version belongs to the bundle, in <vendor>.json, never to a preset.
+        data = self.t.read("V", "filament/A.json")
+        data["version"] = "01.00.00.00"
+        self.t.write("V", "filament/A.json", data)
+        errors, gaps, out = self.normalized()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["unnormalized"], 1, out)
+        self.assertIn("V/filament/A.json: normalize would remove version", out)
+
+    def test_an_index_update_index_would_rebuild_is_an_error(self):
+        for name, parent in (("B", "A"), ("A", None)):
+            data = {"type": "filament", "name": name}
+            if parent:
+                data["inherits"] = parent
+            self.t.write("V", f"filament/{name}.json", data)
+        self.normalize()
+        # Parents-first is what lets the loader resolve inherits in one pass; a
+        # hand-edited list that puts the child first still names every file.
+        index = self.t.read_index("V")
+        index["filament_list"].reverse()
+        self.t.write_index("V", index)
+        errors, gaps, out = self.normalized()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["stale_index"], 1, out)
+        self.assertIn("V.json: update-index would rebuild filament_list", out)
+
+    def test_an_unbuildable_index_is_left_to_the_checks_that_name_it(self):
+        # update-index refuses to rebuild a bundle where two files claim one name,
+        # so "would be rebuilt" on top of the duplicate-name error would be noise.
+        self.t.write("V", "machine/base.json", {"type": "machine", "name": "base"})
+        self.normalize()
+        self.t.write("V", "machine/HSN/base.json", {"type": "machine", "name": "base"})
+        errors, gaps, out = self.normalized()
+        self.assertEqual(errors, 0, out)
+        self.assertEqual(gaps["stale_index"], 0, out)
+
+    def test_a_bundle_with_no_index_still_has_its_files_checked(self):
+        self.t.write("V", "filament/A.json",
+                     {"type": "filament", "name": "A", "is_custom_defined": "0"})
+        os.remove(self.t.index_path("V"))
+        errors, gaps, out = self.normalized()
+        self.assertEqual(errors, 1, out)
+        self.assertEqual(gaps["unnormalized"], 1, out)
+        self.assertEqual(gaps["stale_index"], 0, out)
+
+    def test_the_shared_base_bundle_is_covered_too(self):
+        # normalize and update-index own the shape of every bundle, the shared
+        # library included.
+        self.t.write(apt.OFL, "filament/A.json",
+                     {"type": "filament", "name": "A", "version": "01.00.00.00"})
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)
+        self.assertIn(f"{apt.OFL}/filament/A.json: normalize would remove version", out)
+
+    def test_each_remedy_is_printed_once_for_the_whole_run(self):
+        for n in range(3):
+            self.t.write("V", f"filament/A{n}.json",
+                         {"type": "filament", "name": f"A{n}",
+                          "version": "01.00.00.00"})
+        self.t.write("W", "filament/B.json", {"type": "filament", "name": "B"})
+        rc, out = self.run_command("check")
+        self.assertEqual(rc, 1, out)
+        self.assertIn("3 profile file(s) above are not what", out)
+        self.assertEqual(out.count('normalize" writes: run it and commit'), 1, out)
+        self.assertIn("2 vendor index(es) above are not what", out)
+        self.assertEqual(out.count('update-index" writes: run it and commit'), 1, out)
+
+
+# ---------------------------------------------------------------------------
+# CLI dispatch
+# ---------------------------------------------------------------------------
+
+class TestDispatch(TreeCase):
+    def test_each_command_reaches_its_own_writer(self):
+        self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"})
+        for command, expected in (("normalize", "normalized"),
+                                  ("trim", "unreferenced"),
+                                  ("update-index", "vendor index")):
+            with self.subTest(command=command):
+                rc, out = self.run_command(command, "--dry-run")
+                self.assertEqual(rc, 0, out)
+                self.assertIn(expected, out)
+
+    def test_an_option_belongs_to_one_command_only(self):
+        for argv in (["trim", "--force"],
+                     ["update-index", "--filament-id"],
+                     ["check", "--profile-type", "filament"]):
+            with self.subTest(argv=argv):
+                with self.assertRaises(SystemExit) as cm, \
+                        contextlib.redirect_stdout(io.StringIO()), \
+                        contextlib.redirect_stderr(io.StringIO()):
+                    apt.main([*argv, "--profiles", self.t.profiles])
+                self.assertEqual(cm.exception.code, 2)
+
+    def test_an_unknown_vendor_stops_the_run(self):
+        self.t.write("V", "filament/A.json", {"name": "A"})
+        before = self.t.bytes_map()
+        rc, out = self.run_command("normalize", "--vendor", "Nope")
+        self.assertEqual(rc, 1)
+        self.assertIn("unknown vendor", out)
+        self.assertEqual(self.t.bytes_map(), before)
+
+    def test_an_empty_vendor_means_every_vendor(self):
+        self.t.write("V", "filament/A.json", {"name": "A"})
+        rc, out = self.run_command("normalize", "--vendor", "")
+        self.assertEqual(rc, 0, out)
+        self.assertEqual(self.t.read("V", "filament/A.json")["type"], "filament")
+
+
+# ---------------------------------------------------------------------------
+# the real tree
+# ---------------------------------------------------------------------------
+
+@unittest.skipUnless(os.path.isdir(REAL_PROFILES), "resources/profiles not present")
+class TestRealTree(unittest.TestCase):
+    def test_check_passes(self):
+        # The exact CI invocation, return code included.
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            rc = apt.main(["check"])
+        self.assertEqual(rc, 0, buf.getvalue())
+
+    def test_the_shipped_tree_needs_no_fix(self):
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            changed, errors = apt.normalize_profiles(REAL_PROFILES, dry_run=True)
+        self.assertEqual(errors, 0, buf.getvalue())
+        self.assertEqual(changed, 0, buf.getvalue())
+
+    def test_the_shipped_indexes_need_no_rebuild(self):
+        buf = io.StringIO()
+        with contextlib.redirect_stdout(buf):
+            changed, errors = apt.update_profile_indexes(REAL_PROFILES, dry_run=True)
+        self.assertEqual(errors, 0, buf.getvalue())
+        self.assertEqual(changed, 0, buf.getvalue())
+
+    def test_no_shipped_bundle_is_a_stray_json_file(self):
+        # blacklist.json has no directory beside it, so it is not a vendor.
+        self.assertNotIn("blacklist", apt.list_vendor_names(REAL_PROFILES))
+
+
+if __name__ == "__main__":
+    unittest.main()
diff --git a/scripts/tests/test_setting_id.py b/scripts/tests/test_setting_id.py
index 95e447d03c..f27438788f 100644
--- a/scripts/tests/test_setting_id.py
+++ b/scripts/tests/test_setting_id.py
@@ -1,5 +1,5 @@
 #!/usr/bin/env python3
-"""Tests for the setting_id half of scripts/orca_id_tool.py (stdlib unittest, no
+"""Tests for the setting_id half of scripts/orca_profile_tool.py (stdlib unittest, no
 external deps).
 
 Run from the repo root:  python -m unittest discover -s scripts/tests -v
@@ -17,7 +17,7 @@ import uuid
 
 sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
 
-import orca_id_tool as afi  # noqa: E402
+import orca_profile_tool as afi  # noqa: E402
 
 REPO_ROOT = os.path.abspath(os.path.join(os.path.dirname(__file__), "..", ".."))
 REAL_PROFILES = os.path.join(REPO_ROOT, "resources", "profiles")
@@ -246,7 +246,7 @@ class TestBase62Tail(unittest.TestCase):
 
 class TestAssignment(SettingTreeCase):
     def test_instantiation_is_read_exactly_as_the_validator_reads_it(self):
-        # orca_extra_profile_check.py tests `instantiation == "true"` strictly.
+        # check_setting_id_uniqueness tests `instantiation == "true"` strictly.
         # Anything looser here would hand an id to a preset the validator calls
         # a base profile, and the two would fight over it on every run.
         for name, value in [("Boolean", True), ("Capitalised", "True"),
@@ -852,7 +852,7 @@ class TestCli(SettingTreeCase):
         self.t.write("VendorA", "machine",
                      preset("P1 0.4 nozzle", type_name="machine"))
 
-        rc, out = self.main(["--generate", "--setting-id",
+        rc, out = self.main(["generate-id", "--setting-id",
                              "--profiles", self.t.profiles])
 
         self.assertEqual(rc, 0, out)
@@ -874,13 +874,13 @@ class TestCli(SettingTreeCase):
     def test_dry_run_setting_id_writes_nothing(self):
         self.t.write("VendorA", "filament", preset("A PLA @P1"))
         before = self.t.bytes_map()
-        rc, out = self.main(["--generate", "--setting-id", "--dry-run",
+        rc, out = self.main(["generate-id", "--setting-id", "--dry-run",
                              "--profiles", self.t.profiles])
         self.assertEqual(rc, 0, out)
         self.assertIn("1 file(s) would change", out)   # there WAS one to write
         self.assertEqual(self.t.bytes_map(), before)
         # the real run then writes exactly it
-        rc, out = self.main(["--generate", "--setting-id",
+        rc, out = self.main(["generate-id", "--setting-id",
                              "--profiles", self.t.profiles])
         self.assertEqual(rc, 0, out)
         self.assertIn("1 file(s) changed", out)
@@ -888,7 +888,7 @@ class TestCli(SettingTreeCase):
                          afi.generate_preset_setting_id("VendorA", "filament",
                                                         "A PLA @P1"))
 
-    def test_setting_id_without_generate_is_a_usage_error(self):
+    def test_setting_id_without_a_command_is_a_usage_error(self):
         with contextlib.redirect_stderr(io.StringIO()), \
                 self.assertRaises(SystemExit) as cm:
             afi.main(["--setting-id", "--profiles", self.t.profiles])
diff --git a/scripts/update_bambu_filament_ids.py b/scripts/update_bambu_filament_ids.py
index 539376599e..457a0347aa 100644
--- a/scripts/update_bambu_filament_ids.py
+++ b/scripts/update_bambu_filament_ids.py
@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 """
 Generate resources/printers/bambu_filament_ids.json: the map from Orca's
-content-addressed filament_id ("OF" + 6 base62 chars, see orca_id_tool.py)
+content-addressed filament_id ("OF" + 6 base62 chars, see orca_profile_tool.py)
 to Bambu Lab's own AMS/RFID catalog id ("GF..." etc.) for the subset of filament
 products Bambu ships.
 
@@ -54,7 +54,7 @@ import tempfile
 import datetime
 
 sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
-from orca_id_tool import (  # noqa: E402
+from orca_profile_tool import (  # noqa: E402
     BAMBU_MAP_PATH,
     OFL,
     PROFILES_DIR,
diff --git a/src/OrcaSlicer.cpp b/src/OrcaSlicer.cpp
index 31f39921f4..0c9bd0b1ee 100644
--- a/src/OrcaSlicer.cpp
+++ b/src/OrcaSlicer.cpp
@@ -53,6 +53,8 @@ using namespace nlohmann;
 
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Config.hpp"
+#include "libslic3r/FilamentMixer.hpp"
+#include "libslic3r/Preset.hpp"
 #include "libslic3r/Geometry.hpp"
 #include "libslic3r/GCode.hpp"
 #include "libslic3r/Model.hpp"
@@ -71,17 +73,21 @@ using namespace nlohmann;
 #include "libslic3r/Thread.hpp"
 #include "libslic3r/BlacklistedLibraryCheck.hpp"
 #include "libslic3r/FlushVolCalc.hpp"
+#include "libslic3r/LayOnFace.hpp"
 
 #include "libslic3r/Orient.hpp"
 #include "libslic3r/PNGReadWrite.hpp"
 #include "libslic3r/ObjColorUtils.hpp"
 
 #include "OrcaSlicer.hpp"
-//BBS: add exception handler for win32
+#include <wx/filename.h>
 #include <wx/stdpaths.h>
+//BBS: add exception handler for win32
 #ifdef WIN32
 #include "dev-utils/BaseException.h"
 #endif
+#include "slic3r/Utils/MeshInspect.hpp"
+#include "slic3r/Utils/PaintCLI.hpp"
 #include "slic3r/GUI/PartPlate.hpp"
 #include "slic3r/GUI/BitmapCache.hpp"
 #include "slic3r/GUI/OpenGLManager.hpp"
@@ -160,6 +166,7 @@ std::map<int, std::string> cli_errors = {
     {CLI_FILAMENT_CAN_NOT_MAP, "Some filaments cannot be mapped to correct extruders for multi-extruder Printer."},
     {CLI_ONLY_ONE_TPU_SUPPORTED, "Not support printing 2 or more TPU filaments."},
     {CLI_FILAMENTS_NOT_SUPPORTED_BY_EXTRUDER, "Some filaments cannot be printed on the extruder mapped to."},
+    {CLI_MIXED_FILAMENT_INVALID, "A mixed filament is invalid: its components are different filament types, or it has no filament of its own."},
     {CLI_SLICING_ERROR, "Failed slicing the model. Please verify the slicing of all plates on Orca Slicer before uploading."},
     {CLI_GCODE_PATH_CONFLICTS, " G-code conflicts detected after slicing. Please make sure the 3mf file can be successfully sliced in the latest Orca Slicer. If the file slices normally in Orca Slicer, try moving the wipe tower further from other models, as we use more conservative parameters for it during upload."},
     {CLI_GCODE_PATH_IN_UNPRINTABLE_AREA, "Found G-code in unprintable area of multi-extruder printers after slicing. Please make sure the 3mf file can be successfully sliced in the latest Orca Slicer."}
@@ -185,6 +192,9 @@ typedef struct _sliced_info {
     int    wall_loops{0};
     std::vector<std::string> upward_machines;
     std::vector<std::string> downward_machines;
+    // Structured slicing warnings for result.json, and whether --strict was on.
+    nlohmann::json      warnings = nlohmann::json::array();
+    bool                strict_mode {false};
 }sliced_info_t;
 std::vector<PrintBase::SlicingStatus> g_slicing_warnings;
 
@@ -420,6 +430,21 @@ static PrinterTechnology get_printer_technology(const DynamicConfig &config)
     return(ret);}
 #endif
 
+// Records a structured slicing warning so a CI or scripted consumer can branch on
+// a stable `class` string instead of matching stderr. Warnings are kept on the
+// run's sliced_info and emitted as the top-level "warnings" array of result.json;
+// a non-empty array does not by itself mean the run failed. Under --strict a
+// NON_CRITICAL warning additionally ends the run non-zero.
+//
+// result.json is written on Linux only (see the guard in record_exit_reson), so
+// neither "warnings" nor "strict_mode" reaches Windows or macOS.
+static void cli_record_warning(sliced_info_t &sliced_info, const std::string &cls,
+                               nlohmann::json details = nlohmann::json::object())
+{
+    details["class"] = cls;
+    sliced_info.warnings.push_back(std::move(details));
+}
+
 void record_exit_reson(std::string outputdir, int code, int plate_id, std::string error_message, sliced_info_t& sliced_info, std::map<std::string, std::string> key_values = std::map<std::string, std::string>())
 {
 #if defined(__linux__) || defined(__LINUX__)
@@ -458,6 +483,9 @@ void record_exit_reson(std::string outputdir, int code, int plate_id, std::strin
         for (auto& iter: key_values)
             j[iter.first] = iter.second;
 
+        j["warnings"]    = sliced_info.warnings;
+        j["strict_mode"] = sliced_info.strict_mode;
+
         boost::nowide::ofstream c;
         c.open(result_file, std::ios::out | std::ios::trunc);
         c << j.dump(1, '\t') << std::endl;
@@ -1377,12 +1405,87 @@ int CLI::run(int argc, char **argv)
     bool   need_skip      = (skip_objects.size() > 0)?true:false;
     long long global_begin_time = 0, global_current_time;
     sliced_info_t sliced_info;
+    // Read up front so result.json reports it for early failures too.
+    sliced_info.strict_mode = m_config.opt_bool("strict");
+    // --no-check skips the check behind the only NON_CRITICAL warning --strict acts on
+    // (support needed but disabled), from the point it appears among the actions. The pair
+    // would make --strict a no-op or depend on argument order, so refuse it.
+    if (sliced_info.strict_mode && m_config.opt_bool("no_check")) {
+        boost::nowide::cerr << "--strict cannot be combined with --no-check" << std::endl;
+        record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+        flush_and_exit(CLI_INVALID_PARAMS);
+    }
     std::map<std::string, std::string> record_key_values;
 
     ConfigOptionBool* downward_check_option = m_config.option<ConfigOptionBool>("downward_check");
     if (downward_check_option)
         downward_check = downward_check_option->value;
 
+    // --inspect-mesh prints its JSON and exits, so any action that does work of its
+    // own (slicing, exporting) would be skipped without notice. Reject those up front;
+    // only options that merely tune how the input is loaded may come along.
+    if (std::find(m_actions.begin(), m_actions.end(), "inspect_mesh") != m_actions.end()) {
+        static const std::set<std::string> inspect_compatible = { "inspect_mesh", "uptodate", "load_defaultfila", "min_save",
+                                                                  "mtcpp", "mstpp", "no_check", "normative_check", "pipe" };
+        for (const std::string &action : m_actions) {
+            if (inspect_compatible.count(action) == 0) {
+                std::string flag = action;
+                std::replace(flag.begin(), flag.end(), '_', '-');
+                boost::nowide::cerr << "--inspect-mesh cannot be combined with --" << flag << std::endl;
+                record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                flush_and_exit(CLI_INVALID_PARAMS);
+            }
+        }
+        // Without input there is nothing to inspect; fail rather than print nothing and exit 0.
+        if (m_input_files.empty() && m_config.opt_string("load_assemble_list").empty()) {
+            boost::nowide::cerr << "--inspect-mesh needs an input file or --load-assemble-list" << std::endl;
+            record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+            flush_and_exit(CLI_INVALID_PARAMS);
+        }
+    }
+
+    // --inspect-paint prints its JSON and exits, so any action that does work of its
+    // own (slicing, exporting) would be skipped without notice. Reject those up front;
+    // only options that merely tune how the input is loaded may come along.
+    if (std::find(m_actions.begin(), m_actions.end(), "inspect_paint") != m_actions.end()) {
+        static const std::set<std::string> inspect_compatible = { "inspect_paint", "uptodate", "load_defaultfila", "min_save",
+                                                                  "mtcpp", "mstpp", "no_check", "normative_check", "pipe" };
+        for (const std::string &action : m_actions) {
+            if (inspect_compatible.count(action) == 0) {
+                std::string flag = action;
+                std::replace(flag.begin(), flag.end(), '_', '-');
+                boost::nowide::cerr << "--inspect-paint cannot be combined with --" << flag << std::endl;
+                record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                flush_and_exit(CLI_INVALID_PARAMS);
+            }
+        }
+        // Without input there is nothing to inspect; fail rather than print nothing and exit 0.
+        if (m_input_files.empty() && m_config.opt_string("load_assemble_list").empty()) {
+            boost::nowide::cerr << "--inspect-paint needs an input file or --load-assemble-list" << std::endl;
+            record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+            flush_and_exit(CLI_INVALID_PARAMS);
+        }
+    }
+
+    // --export-settings - writes its JSON to stdout, so reject every action or transform that may write there
+    // too (--info, --help, --orient, slicing and exporting). The allowed ones do nothing when nothing is
+    // sliced or exported.
+    if (std::find(m_actions.begin(), m_actions.end(), "export_settings") != m_actions.end() && m_config.opt_string("export_settings") == "-") {
+        static const std::set<std::string> stdout_compatible = { "export_settings", "uptodate", "load_defaultfila", "min_save",
+                                                                 "mtcpp", "mstpp", "no_check", "normative_check", "pipe" };
+        for (const std::vector<std::string> *opt_keys : { &m_actions, &m_transforms }) {
+            for (const std::string &opt_key : *opt_keys) {
+                if (stdout_compatible.count(opt_key) == 0) {
+                    std::string flag = opt_key;
+                    std::replace(flag.begin(), flag.end(), '_', '-');
+                    boost::nowide::cerr << "--export-settings - cannot be combined with --" << flag << std::endl;
+                    record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                    flush_and_exit(CLI_INVALID_PARAMS);
+                }
+            }
+        }
+    }
+
     bool start_gui = m_actions.empty() && !downward_check;
     if (start_gui) {
         BOOST_LOG_TRIVIAL(info) << "no action, start gui directly" << std::endl;
@@ -1466,6 +1569,10 @@ int CLI::run(int argc, char **argv)
     std::vector<std::string> upward_compatible_printers, new_print_compatible_printers, current_print_compatible_printers, current_different_settings;
     std::vector<std::string> current_filaments_name, current_filaments_system_name, current_inherits_group, current_extruder_variants, new_extruder_variants, current_print_extruder_variants, new_printer_extruder_variants;
     DynamicPrintConfig load_process_config, load_machine_config;
+    //ORCA: full configs of the "current" (3MF-embedded) process/printer presets, kept so that
+    //      compatible_printers_condition can be evaluated for them below. Previously only the
+    //      literal compatible_printers list was extracted.
+    DynamicPrintConfig current_process_full_config, current_printer_full_config;
     bool new_process_config_is_system = true, new_printer_config_is_system = true;
     std::string pipe_name, makerlab_name, makerlab_version, different_process_setting;
     const std::vector<std::string>              &metadata_name               = m_config.option<ConfigOptionStrings>("metadata_name", true)->values;
@@ -1925,7 +2032,7 @@ int CLI::run(int argc, char **argv)
             }
         }
         catch (std::exception& e) {
-            boost::nowide::cerr << construct_assemble_list << ": " << e.what() << std::endl;
+            boost::nowide::cerr << "construct_assemble_list: " << e.what() << std::endl;
             record_exit_reson(outfile_dir, CLI_DATA_FILE_ERROR, 0, cli_errors[CLI_DATA_FILE_ERROR], sliced_info);
             flush_and_exit(CLI_DATA_FILE_ERROR);
         }
@@ -1975,7 +2082,7 @@ int CLI::run(int argc, char **argv)
     }
 
     std::unique_ptr<PresetBundle> cli_preset_bundle;
-    auto ensure_cli_preset_bundle = [&cli_preset_bundle, config_substitution_rule](std::string &error) -> PresetBundle * {
+    auto ensure_cli_preset_bundle = [&cli_preset_bundle](std::string &error) -> PresetBundle * {
         if (cli_preset_bundle)
             return cli_preset_bundle.get();
         try {
@@ -2002,19 +2109,21 @@ int CLI::run(int argc, char **argv)
         }
     };
 
-    auto resolve_preset = [&ensure_cli_preset_bundle, config_substitution_rule](const std::string &file, DynamicPrintConfig &config,
+    // One resolver for the whole run, so presets from the same vendor tree share its load.
+    std::unique_ptr<PresetBundle> system_preset_resolver;
+    auto resolve_preset = [&ensure_cli_preset_bundle, &system_preset_resolver](const std::string &file, DynamicPrintConfig &config,
                                                                                std::string &config_type, const std::string &config_from,
                                                                                bool probe_type, std::string &error) {
         const auto *inherits = config.option<ConfigOptionString>(BBL_JSON_KEY_INHERITS);
         if (!probe_type && (inherits == nullptr || inherits->value.empty()))
             return true;
 
-        std::unique_ptr<PresetBundle> source_bundle;
         PresetBundle                 *bundle = nullptr;
         bool                          allow_source_manifest = false;
         if (config_from == "system") {
-            source_bundle         = std::make_unique<PresetBundle>();
-            bundle                = source_bundle.get();
+            if (!system_preset_resolver)
+                system_preset_resolver = std::make_unique<PresetBundle>();
+            bundle                = system_preset_resolver.get();
             allow_source_manifest = true;
         } else {
             bundle = ensure_cli_preset_bundle(error);
@@ -2046,7 +2155,52 @@ int CLI::run(int argc, char **argv)
                                              error, allow_source_manifest);
     };
 
-    auto load_config_file = [config_substitution_rule, &resolve_preset](const std::string& file, DynamicPrintConfig& config, std::string& config_type,
+    //ORCA: list the keys a user preset overrides relative to its system parent, for the
+    //      `different_settings_to_system` column of an exported 3MF. Without it the CLI
+    //      writes an empty column, so re-opening a CLI-exported project in the GUI shows
+    //      spurious "unsaved changes" and can revert inherited process/filament/machine
+    //      values to system defaults.
+    //
+    //      The parent comes from the preset bundle that inherits resolution already builds,
+    //      so this adds no extra loading. Returns "" whenever the parent cannot be resolved,
+    //      which is exactly the previous behaviour.
+    auto cli_different_settings = [&ensure_cli_preset_bundle](const DynamicPrintConfig &resolved,
+                                                              const std::string        &parent_name,
+                                                              Preset::Type              type) -> std::string {
+        if (parent_name.empty())
+            return std::string();
+        std::string   error;
+        PresetBundle *bundle = ensure_cli_preset_bundle(error);
+        if (bundle == nullptr) {
+            BOOST_LOG_TRIVIAL(warning) << "CLI: no preset bundle for different_settings_to_system: " << error;
+            return std::string();
+        }
+        const PresetCollection *collection = nullptr;
+        switch (type) {
+        case Preset::TYPE_PRINT:    collection = &bundle->prints;    break;
+        case Preset::TYPE_FILAMENT: collection = &bundle->filaments; break;
+        case Preset::TYPE_PRINTER:  collection = &bundle->printers;  break;
+        default:                    return std::string();
+        }
+        const Preset *parent = collection->find_preset2(parent_name, true);
+        if (parent == nullptr) {
+            BOOST_LOG_TRIVIAL(warning) << boost::format("CLI: parent preset '%1%' not found; leaving different_settings_to_system empty")%parent_name;
+            return std::string();
+        }
+        std::vector<std::string> keys = resolved.diff(parent->config);
+        //ORCA: preset metadata, not user-tunable settings. compatible_printers /
+        //      compatible_prints have their own tracking columns and would double-count.
+        keys.erase(std::remove_if(keys.begin(), keys.end(), [](const std::string &k) {
+                       return k == "inherits" || k == "compatible_printers" || k == "compatible_prints"
+                           || k == "compatible_printers_condition" || k == "compatible_prints_condition"
+                           || k == "print_settings_id" || k == "filament_settings_id" || k == "printer_settings_id";
+                   }),
+                   keys.end());
+        BOOST_LOG_TRIVIAL(info) << boost::format("CLI: %1% overrides vs parent '%2%'")%keys.size()%parent_name;
+        return Slic3r::escape_strings_cstyle(keys);
+    };
+
+    auto load_config_file = [&resolve_preset](const std::string& file, DynamicPrintConfig& config, std::string& config_type,
                                 std::string& config_name, std::string& filament_id, std::string& config_from) {
         if (! boost::filesystem::exists(file)) {
             boost::nowide::cerr << __FUNCTION__<< ": can not find setting file: " << file << std::endl;
@@ -2635,6 +2789,8 @@ int CLI::run(int argc, char **argv)
                     flush_and_exit(ret);
                 }
                 upward_compatible_printers = config.option<ConfigOptionStrings>("upward_compatible_machine", true)->values;
+                //ORCA: keep the full config so compatible_printers_condition can be evaluated against it below
+                current_printer_full_config = std::move(config);
             }
         }
     }
@@ -2657,6 +2813,8 @@ int CLI::run(int argc, char **argv)
                     flush_and_exit(ret);
                 }
                 current_print_compatible_printers  = config.option<ConfigOptionStrings>("compatible_printers", true)->values;
+                //ORCA: keep the full config so compatible_printers_condition can be evaluated against it below
+                current_process_full_config = std::move(config);
             }
         }
     }
@@ -2675,46 +2833,88 @@ int CLI::run(int argc, char **argv)
     for (int index = 0; index < upward_compatible_printers.size(); index++) {
         BOOST_LOG_TRIVIAL(info) << boost::format("index %1%, upward_compatible_printers %2%")%index %upward_compatible_printers[index];
     }
+    //ORCA: Replace the four manual equality-loop checks below with is_compatible_with_printer(), the
+    //      same helper the GUI uses, which also evaluates compatible_printers_condition. Process
+    //      profiles that declare compatibility via condition only -- leaving compatible_printers
+    //      empty -- were always reported incompatible by the literal-name match, so a CLI slice with
+    //      such a preset exited with CLI_PROCESS_NOT_COMPATIBLE (-17) even though the GUI accepts the
+    //      same pair. Behaviour is unchanged where an explicit list exists: is_compatible_with_printer
+    //      does the same name match, and returns true when both list and condition are empty (which
+    //      matches the "old 3mf, no compatible printers" path below).
+    auto check_compat = [](const DynamicPrintConfig &process_cfg,
+                           const DynamicPrintConfig &printer_cfg,
+                           const std::string        &printer_name) -> bool {
+        return is_compatible_with_printer(process_cfg, Preset::TYPE_PRINT, printer_cfg, printer_name);
+    };
+
+    //ORCA: a 3MF's project config does not carry compatible_printers / compatible_printers_condition.
+    //      PresetBundle::construct_full_config() erases both and re-emits them as
+    //      print_compatible_printers and compatible_machine_expression_group; they are renamed back
+    //      only on the PresetBundle load path, which the CLI does not take. Feeding the project config
+    //      to the check as-is therefore presents no list and no condition, and
+    //      is_compatible_with_printer() reads that as "no constraint" and accepts every printer.
+    //      Translate the two keys back. Index 0 of the expression group is the print preset -- the
+    //      group is filled print, filaments, printer (PresetBundle.cpp).
+    //      The raw keys win whenever they carry something. A project the CLI exported itself has the
+    //      real compatible_printers_condition AND an all-empty compatible_machine_expression_group,
+    //      so copying the group's first entry unconditionally would overwrite a valid condition with
+    //      "" and accept every printer. The renamed keys are only a fallback, and an empty value is
+    //      never written over a real one.
+    auto cli_process_compat_config = [](const DynamicPrintConfig &project_cfg) -> DynamicPrintConfig {
+        DynamicPrintConfig cfg = project_cfg;
+        const auto *raw_list = project_cfg.option<ConfigOptionStrings>("compatible_printers");
+        const auto *list     = project_cfg.option<ConfigOptionStrings>("print_compatible_printers");
+        if ((raw_list == nullptr || raw_list->values.empty()) && list != nullptr && !list->values.empty())
+            cfg.set_key_value("compatible_printers", new ConfigOptionStrings(list->values));
+        const auto *raw_cond = project_cfg.option<ConfigOptionString>("compatible_printers_condition");
+        const auto *group    = project_cfg.option<ConfigOptionStrings>("compatible_machine_expression_group");
+        if ((raw_cond == nullptr || raw_cond->value.empty()) && group != nullptr && !group->values.empty() &&
+            !group->values.front().empty())
+            cfg.set_key_value("compatible_printers_condition", new ConfigOptionString(group->values.front()));
+        return cfg;
+    };
     if (!new_printer_name.empty()) {
         if (!new_process_name.empty()) {
-            for (int index = 0; index < new_print_compatible_printers.size(); index++) {
-                if (new_print_compatible_printers[index] == new_printer_system_name) {
-                    process_compatible = true;
-                    break;
-                }
-            }
+            //new process + new printer: both configs came from --load-settings
+            process_compatible = check_compat(load_process_config, load_machine_config, new_printer_system_name);
             BOOST_LOG_TRIVIAL(info) << boost::format("new printer %1%, inherited from %2%, new process %3%, inherited from %4% ,compatible %5%")
                 %new_printer_name %new_printer_system_name %new_process_name %new_process_system_name %process_compatible;
         }
         else {
-            for (int index = 0; index < current_print_compatible_printers.size(); index++) {
-                if (current_print_compatible_printers[index] == new_printer_system_name) {
-                    process_compatible = true;
-                    break;
-                }
+            //3MF-embedded process vs new printer. current_process_full_config is only populated from
+            //profiles/BBL/process_full/, so for every other vendor fall back to the 3MF's own project
+            //config in m_print_config, with its renamed compatibility keys translated back (see
+            //cli_process_compat_config above). Without this a 3MF built from a condition-only process
+            //is rejected when re-sliced with the very printer it was made for.
+            {
+                //ORCA: profiles/BBL/{process,machine}_full/ are gitignored and not generated in-tree,
+                //      so current_*_full_config is always empty and this fallback is the only live path.
+                const DynamicPrintConfig process_cfg = current_process_full_config.empty()
+                                                           ? cli_process_compat_config(m_print_config)
+                                                           : current_process_full_config;
+                process_compatible = check_compat(process_cfg, load_machine_config, new_printer_system_name);
             }
             BOOST_LOG_TRIVIAL(info) << boost::format("new printer %1%, inherited from %2%, old process %3%, inherited from %4% ,compatible %5%")
                 %new_printer_name %new_printer_system_name %current_process_name %current_process_system_name %process_compatible;
         }
     }
     else if (!new_process_name.empty()) {
-        for (int index = 0; index < new_print_compatible_printers.size(); index++) {
-            if (new_print_compatible_printers[index] == current_printer_system_name) {
-                process_compatible = true;
-                break;
-            }
+        //new process vs 3MF-embedded printer. As above, current_printer_full_config only resolves for
+        //BBL profiles; otherwise evaluate against the 3MF's own project config in m_print_config, which
+        //holds the embedded printer's printer_notes / nozzle_diameter.
+        {
+            const DynamicPrintConfig &printer_cfg = current_printer_full_config.empty() ? m_print_config : current_printer_full_config;
+            process_compatible = check_compat(load_process_config, printer_cfg, current_printer_system_name);
         }
         BOOST_LOG_TRIVIAL(info) << boost::format("old printer %1%, inherited from %2%, new process %3%, inherited from %4% ,compatible %5%")
             %current_printer_name %current_printer_system_name %new_process_name %new_process_system_name %process_compatible;
     }
     else {
-        //check the compatible of old printer&&process
-        for (int index = 0; index < current_print_compatible_printers.size(); index++) {
-            if (current_print_compatible_printers[index] == current_printer_system_name) {
-                process_compatible = true;
-                break;
-            }
-        }
+        //both sides 3MF-embedded (pure reprocess)
+        if (!current_process_full_config.empty() && !current_printer_full_config.empty())
+            process_compatible = check_compat(current_process_full_config, current_printer_full_config, current_printer_system_name);
+        else
+            process_compatible = std::find(current_print_compatible_printers.begin(), current_print_compatible_printers.end(), current_printer_system_name) != current_print_compatible_printers.end();
         if (!process_compatible && current_print_compatible_printers.empty())
         {
             BOOST_LOG_TRIVIAL(info) << boost::format("old 3mf, no compatible printers, set to compatible");
@@ -2937,8 +3137,10 @@ int CLI::run(int argc, char **argv)
             }
         }
         else {
-            //todo: support user machine preset's different settings
-            different_settings[filament_count+1] = "";
+            //ORCA: was a //todo — compute the user's overrides instead of writing an empty column.
+            different_settings[filament_count+1] = new_printer_config_is_system
+                ? std::string()
+                : cli_different_settings(load_machine_config, new_printer_system_name, Preset::TYPE_PRINTER);
             if (new_printer_config_is_system)
                 inherits_group[filament_count+1] = "";
             else
@@ -3080,8 +3282,14 @@ int CLI::run(int argc, char **argv)
             print_compatible_printers = std::move(current_print_compatible_printers);
         }
         else {
-            //todo: support system process preset
-            different_settings[0] = "";
+            //ORCA: was a //todo. Prefer a value the loaded JSON already carried, otherwise
+            //      compute the overrides against the system parent.
+            if (!different_process_setting.empty())
+                different_settings[0] = different_process_setting;
+            else
+                different_settings[0] = new_process_config_is_system
+                    ? std::string()
+                    : cli_different_settings(load_process_config, new_process_system_name, Preset::TYPE_PRINT);
             if (new_process_config_is_system)
                 inherits_group[0] = "";
             else
@@ -3268,6 +3476,16 @@ int CLI::run(int argc, char **argv)
             int filament_index = load_filaments_index[index];
             std::vector<std::string> different_keys;
 
+            //ORCA: diff before load_default_gcodes_to_config, the way the process and machine
+            //      slots above already do. That call materialises absent gcode keys via
+            //      option(..., true), and DynamicConfig::diff only compares keys present in
+            //      both configs -- so a gcode key the leaf did not carry would go from "not
+            //      compared" to "compared as empty against the parent" and land in the column
+            //      as an override the user never made.
+            std::string filament_different_settings;
+            if (load_filament_count > 0)
+                filament_different_settings = cli_different_settings(config, load_filaments_inherit[index], Preset::TYPE_FILAMENT);
+
             load_default_gcodes_to_config(config, Preset::TYPE_FILAMENT);
 
             if (load_filament_count > 0) {
@@ -3279,8 +3497,8 @@ int CLI::run(int argc, char **argv)
                 opt_filament_settings->set_at(filament_name_setting, filament_index-1, 0);
                 config.erase("filament_settings_id");
 
-                //todo: update different settings of filaments
-                different_settings[filament_index] = "";
+                //ORCA: was a //todo — same treatment as process/machine above.
+                different_settings[filament_index] = filament_different_settings;
                 inherits_group[filament_index] = load_filaments_inherit[index];
             }
             else {
@@ -3585,6 +3803,15 @@ int CLI::run(int argc, char **argv)
                 }
             }
 
+            // A mixed slot never reaches a nozzle, so its row and column stay empty, as in the GUI.
+            // Command line options are not merged into m_print_config yet, so they win here.
+            const ConfigOptionBools *is_mixed_opt = m_extra_config.option<ConfigOptionBools>("filament_is_mixed");
+            if (!is_mixed_opt)
+                is_mixed_opt = m_print_config.option<ConfigOptionBools>("filament_is_mixed");
+            auto is_mixed_slot = [is_mixed_opt](int idx) {
+                return is_mixed_opt && idx < static_cast<int>(is_mixed_opt->values.size()) && is_mixed_opt->values[idx];
+            };
+
             for (size_t nozzle_id = 0; nozzle_id < new_extruder_count; ++nozzle_id) {
             std::vector<double> flush_vol_mtx = get_flush_volumes_matrix(flush_vol_matrix, nozzle_id, new_extruder_count);
                 for (int from_idx = 0; from_idx < project_filament_count; from_idx++) {
@@ -3594,7 +3821,7 @@ int CLI::run(int argc, char **argv)
                     bool is_from_support = filament_is_support->get_at(from_idx);
                     for (int to_idx = 0; to_idx < project_filament_count; to_idx++) {
                         bool is_to_support = filament_is_support->get_at(to_idx);
-                        if (from_idx == to_idx) {
+                        if (from_idx == to_idx || is_mixed_slot(from_idx) || is_mixed_slot(to_idx)) {
                             flush_vol_mtx[project_filament_count * from_idx + to_idx] = 0.f;
                         } else {
                             int flushing_volume = 0;
@@ -3731,12 +3958,113 @@ int CLI::run(int argc, char **argv)
         }
     }
 
+    //ORCA: settings passed on the command line (--sparse-infill-density 25% ...) override the loaded
+    //      presets right here, so they belong in different_settings_to_system just as a preset
+    //      override does. Without them re-opening the exported project in the GUI shows nothing
+    //      modified and reverts those values to the system presets'.
+    //
+    //      The keys come from m_config, not m_extra_config: read_cli() puts only what the user typed
+    //      into m_config (setup() adds nothing but CLI-own defaults), whereas the CLI writes its own
+    //      values into m_extra_config. Only keys whose value the override actually changed are
+    //      recorded -- a typed value equal to the loaded one modifies nothing -- and each lands in
+    //      the column(s) whose preset type owns it: [0] process, [1..n-2] filaments, [n-1] printer.
+    //
+    //      "Changed" is judged the way the value is read: a list is compared entry by entry with a
+    //      missing entry read as the first, as get_at() does -- so --nozzle-temperature 245 against
+    //      245,245,245 is no change, although the two serialize differently.
+    //
+    //      A key the loaded config does not carry at all is always recorded, even if the typed value
+    //      equals the built-in default. On reopen the GUI restores an unlisted key from the SYSTEM
+    //      preset, which need not match that default: a 3MF written before an option existed leaves
+    //      it absent here, and --sparse-infill-density 20% (the default) against a Prusa system 15%
+    //      would otherwise go unrecorded and be reverted. Over-recording is cosmetic; under-recording
+    //      loses the value.
+    std::map<std::string, std::unique_ptr<ConfigOption>> cli_override_before;
+    for (const std::string &key : m_config.keys()) {
+        if (!m_extra_config.has(key))
+            continue;
+        const ConfigOption *loaded = m_print_config.option(key);
+        cli_override_before[key].reset(loaded != nullptr ? loaded->clone() : nullptr); // null: always recorded
+    }
+
     // Apply command line options to a more specific DynamicPrintConfig which provides normalize()
     // (command line options override --load files)
     m_print_config.apply(m_extra_config, true);
+
+    if (!cli_override_before.empty()) {
+        std::vector<std::string> &columns = m_print_config.option<ConfigOptionStrings>("different_settings_to_system", true)->values;
+        auto owned_by = [](const std::vector<std::string> &options, const std::string &key) {
+            return std::find(options.begin(), options.end(), key) != options.end();
+        };
+        auto add_to_column = [&columns](size_t index, const std::string &key) {
+            std::vector<std::string> keys;
+            Slic3r::unescape_strings_cstyle(columns[index], keys);
+            if (std::find(keys.begin(), keys.end(), key) == keys.end()) {
+                keys.push_back(key);
+                columns[index] = Slic3r::escape_strings_cstyle(keys);
+            }
+        };
+        auto same_value = [](const ConfigOption *a, const ConfigOption *b) {
+            if (a == nullptr || b == nullptr)
+                return false;
+            const auto *va = dynamic_cast<const ConfigOptionVectorBase *>(a);
+            const auto *vb = dynamic_cast<const ConfigOptionVectorBase *>(b);
+            if (va == nullptr || vb == nullptr)
+                return va == vb && a->serialize() == b->serialize();
+            const std::vector<std::string> ea = va->vserialize(), eb = vb->vserialize();
+            if (ea.empty() || eb.empty())
+                return ea.empty() && eb.empty();
+            for (size_t i = 0; i < std::max(ea.size(), eb.size()); ++i)
+                if (ea[i < ea.size() ? i : 0] != eb[i < eb.size() ? i : 0])
+                    return false;
+            return true;
+        };
+        //ORCA: always true after the resize to filament_count + 2 above, and nothing in between can
+        //      shrink the column vector -- different_settings_to_system is not a CLI option. Kept as
+        //      a check rather than an assert: release builds compile asserts out, so an assert would
+        //      protect nothing, while a build with _GLIBCXX_ASSERTIONS would abort on columns[0].
+        if (columns.size() >= 2) {
+            for (const auto &[key, before] : cli_override_before) {
+                if (same_value(before.get(), m_print_config.option(key)))
+                    continue;
+                bool recorded = false;
+                if (owned_by(Preset::print_options(), key)) {
+                    add_to_column(0, key);
+                    recorded = true;
+                }
+                if (owned_by(Preset::filament_options(), key)) {
+                    for (size_t i = 1; i + 1 < columns.size(); ++i)
+                        add_to_column(i, key);
+                    recorded = true;
+                }
+                if (owned_by(Preset::printer_options(), key)) {
+                    add_to_column(columns.size() - 1, key);
+                    recorded = true;
+                }
+                if (recorded)
+                    BOOST_LOG_TRIVIAL(info) << boost::format("CLI: override %1% recorded in different_settings_to_system") % key;
+            }
+        }
+    }
     // Normalizing after importing the 3MFs / AMFs
     m_print_config.normalize_fdm();
 
+    // A mixed slot is virtual but still needs a filament entry of its own. Without one, feature
+    // filament ids aimed at it fall outside the filament count, are reset to the first filament
+    // and the model silently prints in a single colour.
+    if (const auto *is_mixed_opt = m_print_config.option<ConfigOptionBools>("filament_is_mixed")) {
+        const auto &is_mixed = is_mixed_opt->values;
+        for (size_t slot = static_cast<size_t>(std::max(filament_count, 0)); slot < is_mixed.size(); ++slot) {
+            if (!is_mixed[slot])
+                continue;
+            BOOST_LOG_TRIVIAL(error) << boost::format("mixed filament slot %1% has no filament of its own, only %2% filaments are loaded; "
+                                                      "load one filament per slot, including each mixed one")
+                                            % (slot + 1) % filament_count;
+            record_exit_reson(outfile_dir, CLI_MIXED_FILAMENT_INVALID, 0, cli_errors[CLI_MIXED_FILAMENT_INVALID], sliced_info);
+            flush_and_exit(CLI_MIXED_FILAMENT_INVALID);
+        }
+    }
+
     m_print_config.option<ConfigOptionEnum<PrinterTechnology>>("printer_technology", true)->value = printer_technology;
 
     bool has_wipe_tower_position = m_print_config.option<ConfigOptionFloats>("wipe_tower_x") && m_print_config.option<ConfigOptionFloats>("wipe_tower_y");
@@ -3791,6 +4119,15 @@ int CLI::run(int argc, char **argv)
     bool is_smooth_timelapse = false;
     if (enable_timelapse && timelapse_type_opt && (timelapse_type_opt->getInt() == TimelapseType::tlSmooth))
         is_smooth_timelapse = true;
+    // A mixed filament swaps between its components every layer, so it needs the tower even when
+    // every loaded preset is the same.
+    if (disable_wipe_tower_after_mapping) {
+        if (const auto *is_mixed_opt = m_print_config.option<ConfigOptionBools>("filament_is_mixed");
+            is_mixed_opt && has_any_mixed_filament(is_mixed_opt->values)) {
+            disable_wipe_tower_after_mapping = false;
+            BOOST_LOG_TRIVIAL(info) << boost::format("%1%, set disable_wipe_tower_after_mapping back to false due to a mixed filament")%__LINE__;
+        }
+    }
     if (disable_wipe_tower_after_mapping) {
         if (is_smooth_timelapse)
         {
@@ -4015,7 +4352,7 @@ int CLI::run(int argc, char **argv)
         }
     };
 
-    auto check_plate_wipe_tower = [get_print_sequence, is_smooth_timelapse, new_extruder_count](Slic3r::GUI::PartPlate* plate, int plate_index, DynamicPrintConfig& print_config, plate_obj_size_info_t &plate_obj_size_info) {
+    auto check_plate_wipe_tower = [get_print_sequence, is_smooth_timelapse](Slic3r::GUI::PartPlate* plate, int plate_index, DynamicPrintConfig& print_config, plate_obj_size_info_t &plate_obj_size_info) {
         plate_obj_size_info.obj_bbox= plate->get_objects_bounding_box();
         BOOST_LOG_TRIVIAL(info) << boost::format("plate %1%, object bbox: min {%2%, %3%, %4%} - max {%5%, %6%, %7%}")
                     %(plate_index+1) %plate_obj_size_info.obj_bbox.min.x() % plate_obj_size_info.obj_bbox.min.y() % plate_obj_size_info.obj_bbox.min.z() %plate_obj_size_info.obj_bbox.max.x() % plate_obj_size_info.obj_bbox.max.y() % plate_obj_size_info.obj_bbox.max.z();
@@ -4059,22 +4396,13 @@ int CLI::run(int argc, char **argv)
         plate_obj_size_info.wipe_x = wipe_x_option->get_at(plate_index);
         plate_obj_size_info.wipe_y = wipe_y_option->get_at(plate_index);
 
-        ConfigOptionFloat* width_option = print_config.option<ConfigOptionFloat>("prime_tower_width", true);
-        plate_obj_size_info.wipe_width = width_option->value;
+        // Body and brim from one estimate: resolving an auto (-1) brim against a different
+        // height would size the two halves of the same tower from two different objects.
+        const WipeTowerFootprint footprint = plate->estimate_wipe_tower_footprint(print_config, filaments_cnt);
+        float brim_width = float(footprint.brim_width);
 
-        ConfigOptionFloat* brim_width_option = print_config.option<ConfigOptionFloat>("prime_tower_brim_width", true);
-        float brim_width = brim_width_option->value;
-        if (brim_width < 0) brim_width = WipeTower::get_auto_brim_by_height((float)plate_obj_size_info.obj_bbox.max.z());
-
-        ConfigOptionFloat* volume_option = print_config.option<ConfigOptionFloat>("prime_volume", true);
-        float wipe_volume = volume_option->value;
-
-        const ConfigOptionBool * wrapping_detection = print_config.option<ConfigOptionBool>("enable_wrapping_detection");
-        bool enable_wrapping = (wrapping_detection != nullptr) && wrapping_detection->value;
-
-        Vec3d wipe_tower_size = plate->estimate_wipe_tower_size(print_config, plate_obj_size_info.wipe_width, wipe_volume, new_extruder_count, filaments_cnt, false, enable_wrapping);
-        plate_obj_size_info.wipe_width = wipe_tower_size(0);
-        plate_obj_size_info.wipe_depth = wipe_tower_size(1);
+        plate_obj_size_info.wipe_width = footprint.width;
+        plate_obj_size_info.wipe_depth = footprint.depth;
 
         Vec3d origin = plate->get_origin();
         Vec3d start(origin(0) + plate_obj_size_info.wipe_x - brim_width, origin(1) + plate_obj_size_info.wipe_y, 0.f);
@@ -4562,6 +4890,64 @@ int CLI::run(int argc, char **argv)
                 for (auto &o : model.objects)
                     // this affects volumes:
                     o->rotate(Geometry::deg2rad(m_config.opt_float(opt_key)), Y);
+        } else if (opt_key == "ground_largest_face" || opt_key == "ground_face_normal" || opt_key == "ground_face_point") {
+            // Each instance is laid on one of its lay-on-face planes, which are computed from the current part
+            // transformations, so the rotations given before this option are respected. A direction or point is in
+            // object coordinates, so it names the same face for every instance of an object.
+            std::function<int(const std::vector<LayOnFacePlane>&, const Transform3d&)> pick;
+            if (opt_key == "ground_largest_face") {
+                if (m_config.opt_bool(opt_key))
+                    pick = [](const std::vector<LayOnFacePlane>& planes, const Transform3d&) { return find_largest_plane(planes); };
+            } else {
+                // Only options given on the command line reach this loop, so an empty value is malformed input too.
+                const std::string& value = m_config.opt_string(opt_key);
+                Vec3d v;
+                int   consumed = 0;
+                if (sscanf(value.c_str(), "%lf,%lf,%lf%n", &v.x(), &v.y(), &v.z(), &consumed) != 3 || consumed != int(value.size()) ||
+                    !v.allFinite() || (opt_key == "ground_face_normal" && v.norm() < EPSILON)) {
+                    BOOST_LOG_TRIVIAL(error) << boost::format("Invalid params: %1% expects three comma-separated numbers, got \"%2%\"") % opt_key % value;
+                    record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                    flush_and_exit(CLI_INVALID_PARAMS);
+                }
+                if (opt_key == "ground_face_normal")
+                    pick = [v](const std::vector<LayOnFacePlane>& planes, const Transform3d&) { return find_plane_by_normal(planes, v); };
+                else
+                    pick = [v](const std::vector<LayOnFacePlane>& planes, const Transform3d& inst_matrix) {
+                        return find_plane_at_point(planes, inst_matrix, v, 0.01);
+                    };
+            }
+            if (pick) {
+                size_t laid = 0, missed = 0;
+                for (auto& model : m_models) {
+                    model.add_default_instances();
+                    for (ModelObject* o : model.objects)
+                        for (size_t i = 0; i < o->instances.size(); ++i) {
+                            const Transform3d                 inst_matrix = o->instances[i]->get_matrix_no_offset();
+                            const std::vector<LayOnFacePlane> planes      = lay_on_face_planes(*o, inst_matrix);
+                            if (planes.empty()) {
+                                // Small or smooth parts (e.g. a sphere) have no face to rest on; the gizmo offers none either.
+                                BOOST_LOG_TRIVIAL(warning) << boost::format("%1%: object %2% has no face large enough to lay on, left as it is") % opt_key % o->name;
+                                continue;
+                            }
+                            const int idx = pick(planes, inst_matrix);
+                            if (idx < 0) {
+                                // Only a point can miss: with several objects it usually belongs to one of them.
+                                BOOST_LOG_TRIVIAL(warning) << boost::format("%1%: no face of object %2% contains the point, left as it is") % opt_key % o->name;
+                                ++missed;
+                                continue;
+                            }
+                            BOOST_LOG_TRIVIAL(info) << boost::format("%1%: object %2% instance %3% laid on the %4% mm2 face with normal %5%")
+                                                        % opt_key % o->name % i % planes[idx].area % planes[idx].normal.transpose();
+                            lay_on_face(*o, i, planes[idx].normal);
+                            ++laid;
+                        }
+                }
+                if (laid == 0 && missed > 0) {
+                    BOOST_LOG_TRIVIAL(error) << boost::format("Invalid params: %1%: no face of any object contains the point") % opt_key;
+                    record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                    flush_and_exit(CLI_INVALID_PARAMS);
+                }
+            }
         } else if (opt_key == "scale") {
             float ratio = m_config.opt_float(opt_key);
             if (ratio <= 0.f) {
@@ -4835,13 +5221,16 @@ int CLI::run(int argc, char **argv)
                     }
                 }
 
-                if (!arrange_cfg.is_seq_print && (assemble_plate.filaments_count > 1)||(enable_wrapping_detect && !current_wrapping_exclude_area.empty()))
+                if ((!arrange_cfg.is_seq_print && (assemble_plate.filaments_count > 1))||(enable_wrapping_detect && !current_wrapping_exclude_area.empty()))
                 {
                     //prepare the wipe tower
                     int plate_count = partplate_list.get_plate_count();
 
                     auto printer_structure_opt = m_print_config.option<ConfigOptionEnum<PrinterStructure>>("printer_structure");
-                    const float tower_brim_width = m_print_config.option<ConfigOptionFloat>("prime_tower_width", true)->value;
+                    // This margin only pre-adjusts the default away from the near edges;
+                    // estimate_wipe_tower_polygon below computes the real clamped position.
+                    float tower_brim_width = m_print_config.option<ConfigOptionFloat>("prime_tower_brim_width", true)->value;
+                    if (tower_brim_width < 0.f) tower_brim_width = 8.f; // auto: object heights unknown here, 8 mm is the auto cap
                     const float tower_margin = WIPE_TOWER_MARGIN + tower_brim_width;
 
                     // set the default position, the same with print config(left top)
@@ -4875,7 +5264,7 @@ int CLI::run(int argc, char **argv)
                     wipe_y_option->set_at(&wt_y_opt, i, 0);
 
                     Vec3d wipe_tower_size, wipe_tower_pos;
-                    ArrangePolygon wipe_tower_ap = cur_plate->estimate_wipe_tower_polygon(m_print_config, i, wipe_tower_pos, wipe_tower_size, new_extruder_count, assemble_plate.filaments_count, true);
+                    ArrangePolygon wipe_tower_ap = cur_plate->estimate_wipe_tower_polygon(m_print_config, i, wipe_tower_pos, wipe_tower_size, assemble_plate.filaments_count, true);
 
                     //update the new wp position
                     wt_x_opt.value = wipe_tower_pos(0);
@@ -5118,7 +5507,7 @@ int CLI::run(int argc, char **argv)
                                 //skip this object due to be locked in plate
                                 ap.itemid = locked_aps.size();
                                 locked_aps.emplace_back(ap);
-                                boost::nowide::cout <<__FUNCTION__ << boost::format(": skip locked instance, obj_id %1%, instance_id %2%") % oidx % inst_idx;
+                                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": skip locked instance, obj_id %1%, instance_id %2%") % oidx % inst_idx;
                             }
                         }
                     }
@@ -5138,7 +5527,10 @@ int CLI::run(int argc, char **argv)
                         int extruder_size = used_filament_set.size();
 
                         auto printer_structure_opt = m_print_config.option<ConfigOptionEnum<PrinterStructure>>("printer_structure");
-                        const float tower_brim_width      = m_print_config.option<ConfigOptionFloat>("prime_tower_width", true)->value;
+                        // This margin only pre-adjusts the default away from the near edges;
+                        // estimate_wipe_tower_polygon below computes the real clamped position.
+                        float tower_brim_width = m_print_config.option<ConfigOptionFloat>("prime_tower_brim_width", true)->value;
+                        if (tower_brim_width < 0.f) tower_brim_width = 8.f; // auto: object heights unknown here, 8 mm is the auto cap
                         const float tower_margin          = WIPE_TOWER_MARGIN + tower_brim_width;
                         // set the default position, the same with print config(left top)
                         float x = WIPE_TOWER_DEFAULT_X_POS;
@@ -5175,7 +5567,7 @@ int CLI::run(int argc, char **argv)
                             }
 
                             Vec3d wipe_tower_size, wipe_tower_pos;
-                            ArrangePolygon wipe_tower_ap = partplate_list.get_plate(plate_index_valid)->estimate_wipe_tower_polygon(m_print_config, plate_index_valid, wipe_tower_pos, wipe_tower_size, new_extruder_count, extruder_size, true);
+                            ArrangePolygon wipe_tower_ap = partplate_list.get_plate(plate_index_valid)->estimate_wipe_tower_polygon(m_print_config, plate_index_valid, wipe_tower_pos, wipe_tower_size, extruder_size, true);
 
                             //update the new wp position
                             if (bedid < plate_count) {
@@ -5276,22 +5668,16 @@ int CLI::run(int argc, char **argv)
 
                             //float depth = v * (filaments_cnt - 1) / (layer_height * w);
 
-                            const ConfigOptionBool *wrapping_detection = m_print_config.option<ConfigOptionBool>("enable_wrapping_detection");
-                            bool   enable_wrapping    = (wrapping_detection != nullptr) && wrapping_detection->value;
-
-                            Vec3d wipe_tower_size = cur_plate->estimate_wipe_tower_size(m_print_config, w, v, new_extruder_count, filaments_cnt, false, enable_wrapping);
+                            const WipeTowerFootprint footprint = cur_plate->estimate_wipe_tower_footprint(m_print_config, filaments_cnt);
+                            Vec3d wipe_tower_size(footprint.width, footprint.depth, footprint.height);
                             Vec3d plate_origin = cur_plate->get_origin();
                             int plate_width, plate_depth;
                             double plate_height;
                             partplate_list.get_plate_size(plate_width, plate_depth, plate_height);
                             float depth = wipe_tower_size(1);
-                            float margin = 15.f, wp_brim_width = 0.f;
-                            ConfigOption *wipe_tower_brim_width_opt = m_print_config.option("prime_tower_brim_width");
-                            if (wipe_tower_brim_width_opt ) {
-                                wp_brim_width = wipe_tower_brim_width_opt->getFloat();
-                                if (wp_brim_width < 0) wp_brim_width = WipeTower::get_auto_brim_by_height((float) wipe_tower_size.z());
-                                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format("arrange wipe_tower: wp_brim_width %1%")%wp_brim_width;
-                            }
+                            // Brim already resolved against the height the body was sized from.
+                            float margin = 15.f, wp_brim_width = float(footprint.brim_width);
+                            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format("arrange wipe_tower: wp_brim_width %1%")%wp_brim_width;
                             w = wipe_tower_size(0);
 
                             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format("arrange wipe_tower: x=%1%, y=%2%, width=%3%, depth=%4%, angle=%5%, prime_volume=%6%, filaments_cnt=%7%, layer_height=%8%, plate_width=%9%, plate_depth=%10%")
@@ -5710,13 +6096,64 @@ int CLI::run(int argc, char **argv)
             //FIXME check for mixing the FFF / SLA parameters.
             // or better save fff_print_config vs. sla_print_config
             //m_print_config.save(m_config.opt_string("save"));
-            m_print_config.save_to_json(m_config.opt_string(opt_key), std::string("project_settings"), std::string("project"), std::string(SoftFever_VERSION));
+            const std::string &settings_file = m_config.opt_string(opt_key);
+            if (settings_file == "-")
+                m_print_config.save_to_json(boost::nowide::cout, "project_settings", "project", SoftFever_VERSION, /*replace_invalid_utf8=*/true);
+            else
+                m_print_config.save_to_json(settings_file, std::string("project_settings"), std::string("project"), std::string(SoftFever_VERSION));
         } else if (opt_key == "info") {
             // --info works on unrepaired model
             for (Model &model : m_models) {
                 model.add_default_instances();
                 model.print_info();
             }
+        } else if (opt_key == "inspect_mesh") {
+            // Machine-readable alternative to --info. Registered as an action so it satisfies the
+            // "needs an action" check and bypasses the GUI fallback, then exits once the JSON is out.
+            for (Model &model : m_models) {
+                model.add_default_instances();
+                Slic3r::MeshInspect::inspect_to_json(model, m_input_files, boost::nowide::cout);
+            }
+            boost::nowide::cout.flush();
+            // Conflicting actions were rejected before loading. Finish like the end of run().
+            // flush_and_exit() is not usable here: it prints "found error ..." to stdout,
+            // which would corrupt the JSON.
+#if defined(__linux__) || defined(__LINUX__)
+            if (g_cli_callback_mgr.is_started()) {
+                PrintBase::SlicingStatus slicing_status{100, "All done, Success"};
+                cli_status_callback(slicing_status);
+            }
+            g_cli_callback_mgr.stop();
+#endif
+            for (Model &m : m_models)
+                m.remove_backup_path_if_exist();
+            record_exit_reson(outfile_dir, CLI_SUCCESS, plate_to_slice, cli_errors[CLI_SUCCESS], sliced_info);
+            boost::nowide::cerr.flush();
+            return CLI_SUCCESS;
+        } else if (opt_key == "inspect_paint") {
+            // --inspect-paint — read the per-facet enforcer/blocker/extruder/
+            // fuzzy state from the loaded model and emit a JSON summary.
+            // Machine-readable alternative to opening the paint gizmos.
+            for (Model &model : m_models) {
+                model.add_default_instances();
+                Slic3r::PaintCLI::inspect_to_json(model, m_input_files, boost::nowide::cout);
+            }
+            boost::nowide::cout.flush();
+            // The tooltip promises "then exit"; conflicting actions were rejected before
+            // loading. Finish like the end of run(). flush_and_exit() is not usable here:
+            // it prints "found error ..." to stdout, which would corrupt the JSON.
+#if defined(__linux__) || defined(__LINUX__)
+            if (g_cli_callback_mgr.is_started()) {
+                PrintBase::SlicingStatus slicing_status{100, "All done, Success"};
+                cli_status_callback(slicing_status);
+            }
+            g_cli_callback_mgr.stop();
+#endif
+            for (Model &m : m_models)
+                m.remove_backup_path_if_exist();
+            record_exit_reson(outfile_dir, CLI_SUCCESS, plate_to_slice, cli_errors[CLI_SUCCESS], sliced_info);
+            boost::nowide::cerr.flush();
+            return CLI_SUCCESS;
         } else if (opt_key == "uptodate") {
             //already processed before
         } else if (opt_key == "min_save") {
@@ -5757,6 +6194,8 @@ int CLI::run(int argc, char **argv)
             export_3mf_file = m_config.opt_string(opt_key);
         }else if(opt_key=="no_check"){
             no_check = m_config.opt_bool(opt_key);
+        }else if(opt_key=="strict"){
+            //already read into sliced_info at the start of run()
         //} else if (opt_key == "export_gcode" || opt_key == "export_sla" || opt_key == "slice") {
         } else if (opt_key == "normative_check") {
             //already processed before
@@ -5807,6 +6246,34 @@ int CLI::run(int argc, char **argv)
                 //Print       fff_print;
                 std::vector<size_t> plate_triangle_counts(partplate_list.get_plate_count(), 0);
 
+                // The stored (or default) tower position may not fit the tower these plates
+                // need, and no CLI placement site runs on a plain slice - mirror the GUI's
+                // reload clamp and fit every plate's tower into the printable area first.
+                if (m_print_config.option<ConfigOptionBool>("enable_prime_tower", true)->value) {
+                    for (int index = 0; index < partplate_list.get_plate_count(); index++) {
+                        if ((plate_to_slice != 0) && (plate_to_slice != (index + 1)))
+                            continue;
+                        Slic3r::GUI::PartPlate *plate = partplate_list.get_plate(index);
+                        // Printing by object disables the tower only with more than one instance.
+                        bool is_seq_print = false;
+                        get_print_sequence(plate, m_print_config, is_seq_print);
+                        if (is_seq_print && plate->printable_instance_size() > 1)
+                            continue;
+                        // An empty estimate is a plate that prints no tower (one filament and
+                        // neither smooth timelapse, wrapping detection nor a raft).
+                        Vec3d wt_pos, wt_size;
+                        plate->estimate_wipe_tower_polygon(m_print_config, index, wt_pos, wt_size);
+                        if (wt_size(0) < EPSILON || wt_size(1) < EPSILON)
+                            continue;
+                        ConfigOptionFloat wt_x_opt((float) wt_pos(0));
+                        ConfigOptionFloat wt_y_opt((float) wt_pos(1));
+                        m_print_config.option<ConfigOptionFloats>("wipe_tower_x", true)->set_at(&wt_x_opt, index, 0);
+                        m_print_config.option<ConfigOptionFloats>("wipe_tower_y", true)->set_at(&wt_y_opt, index, 0);
+                        BOOST_LOG_TRIVIAL(info) << boost::format("plate %1%: wipe tower clamped to {%2%, %3%}, size {%4%, %5%}")
+                            % (index + 1) % wt_pos(0) % wt_pos(1) % wt_size(0) % wt_size(1);
+                    }
+                }
+
                 while(!finished)
                 {
                     //BBS: slice every partplate one by one
@@ -5978,6 +6445,36 @@ int CLI::run(int argc, char **argv)
                                 flush_and_exit(CLI_ONLY_ONE_TPU_SUPPORTED);
                             }
 
+                            // Same type gate as the GUI's Sidebar::has_broken_mixed_filament: refuse a plate that uses a
+                            // mixed slot whose components are different filament types. Missing or out-of-range
+                            // components never get here, validate() already rejects them for the whole project.
+                            const auto *is_mixed_opt   = m_print_config.option<ConfigOptionBools>("filament_is_mixed");
+                            const auto *components_opt = m_print_config.option<ConfigOptionStrings>("filament_mixed_components");
+                            if (is_mixed_opt && components_opt && has_any_mixed_filament(is_mixed_opt->values)) {
+                                const auto &is_mixed   = is_mixed_opt->values;
+                                const auto &components = components_opt->values;
+                                const size_t num_physical = static_cast<size_t>(filament_count) - static_cast<size_t>(std::count(is_mixed.begin(), is_mixed.end(), true));
+                                std::vector<std::string> physical_types(num_physical);
+                                for (size_t f_index = 0; f_index < num_physical; ++f_index) {
+                                    std::string displayed_type;
+                                    physical_types[f_index] = m_print_config.get_filament_type(displayed_type, static_cast<int>(f_index));
+                                    if (physical_types[f_index].empty())
+                                        physical_types[f_index] = "PLA";
+                                }
+                                const std::vector<size_t> mismatched_slots = check_mixed_filament_type_consistency(is_mixed, components, physical_types);
+                                // plate_filaments has mixed slots expanded to their components; the gate needs the slots.
+                                const std::vector<int> plate_slots = mismatched_slots.empty() ? std::vector<int>() :
+                                                                     part_plate->get_extruders_under_cli(true, m_print_config, false);
+                                for (size_t slot : mismatched_slots) {
+                                    if (std::find(plate_slots.begin(), plate_slots.end(), static_cast<int>(slot) + 1) == plate_slots.end())
+                                        continue;
+                                    BOOST_LOG_TRIVIAL(error) << boost::format("plate %1%: mixed filament %2% mixes components of different filament types")
+                                                                    % (index + 1) % (slot + 1);
+                                    record_exit_reson(outfile_dir, CLI_MIXED_FILAMENT_INVALID, index + 1, cli_errors[CLI_MIXED_FILAMENT_INVALID], sliced_info);
+                                    flush_and_exit(CLI_MIXED_FILAMENT_INVALID);
+                                }
+                            }
+
                             if (new_extruder_count > 1) {
                                 std::vector<std::vector<int>> unprintable_filament_vec;
                                 for (const std::set<int>& filamnt_ids : unprintable_filament_ids) {
@@ -6407,6 +6904,15 @@ int CLI::run(int argc, char **argv)
 
                                                 if (status.warning_level == PrintStateBase::WarningLevel::NON_CRITICAL) {
                                                     BOOST_LOG_TRIVIAL(warning) << "plate "<< index+1<< ": found NON_CRITICAL slicing warnings: "<<status.text <<std::endl;
+                                                    // Always record for AI/CI consumers; under --strict, elevate to a
+                                                    // non-zero exit so scripted pipelines don't ship a "warning OK" slice.
+                                                    cli_record_warning(sliced_info, "slicing_warning_non_critical",
+                                                                       nlohmann::json{{"plate_id", index+1}, {"text", status.text}});
+                                                    if (sliced_info.strict_mode) {
+                                                        sliced_info.sliced_plates.push_back(sliced_plate_info);
+                                                        record_exit_reson(outfile_dir, CLI_SLICING_ERROR, index+1, cli_errors[CLI_SLICING_ERROR], sliced_info);
+                                                        flush_and_exit(CLI_SLICING_ERROR);
+                                                    }
                                                 }
                                                 else {
                                                     BOOST_LOG_TRIVIAL(warning) << boost::format("plate %1%: found slicing warnings: %2%, no_check=%3%")%(index+1) %status.text %no_check;
@@ -7430,6 +7936,13 @@ bool CLI::setup(int argc, char **argv)
         this->print_help();
         return false;
     }
+
+    // Orca: resolve here, while the process is still in the directory the user invoked it from.
+    // GUI_App's constructor moves the working directory to <data_dir>/log, long before the GUI
+    // opens these files in post_init(), and a relative path would then resolve against that.
+    for (std::string &input_file : m_input_files)
+        input_file = resolve_cli_input_path(input_file);
+
     // Parse actions and transform options.
     for (auto const &opt_key : opt_order) {
         if (cli_actions_config_def.has(opt_key))
diff --git a/src/OrcaSlicer_app_msvc.cpp b/src/OrcaSlicer_app_msvc.cpp
index 35568a9cfa..265047fa34 100644
--- a/src/OrcaSlicer_app_msvc.cpp
+++ b/src/OrcaSlicer_app_msvc.cpp
@@ -297,7 +297,7 @@ int wmain(int argc, wchar_t **argv)
 //	printf("Loading Slic3r library: %S\n", path_to_slic3r);
     HINSTANCE hInstance_Slic3r = LoadLibraryExW(path_to_slic3r, nullptr, 0);
     if (hInstance_Slic3r == nullptr) {
-        printf("OrcaSlicer.dll was not loaded, error=%d\n", GetLastError());
+        printf("OrcaSlicer.dll was not loaded, error=%lu\n", GetLastError());
         return -1;
     }
 
diff --git a/src/dev-utils/BaseException.h b/src/dev-utils/BaseException.h
index 2cb65d945e..20b6fb0c89 100644
--- a/src/dev-utils/BaseException.h
+++ b/src/dev-utils/BaseException.h
@@ -1,7 +1,7 @@
 #pragma once
 #include <boost/nowide/cstdio.hpp>
 #include <boost/nowide/fstream.hpp>
-#include "stackwalker.h"
+#include "StackWalker.h"
 #include <eh.h>
 
 class CBaseException : public CStackWalker
diff --git a/src/dev-utils/OrcaSlicer_profile_validator.cpp b/src/dev-utils/OrcaSlicer_profile_validator.cpp
index 67d0ba444d..56acbaa732 100644
--- a/src/dev-utils/OrcaSlicer_profile_validator.cpp
+++ b/src/dev-utils/OrcaSlicer_profile_validator.cpp
@@ -8,7 +8,11 @@
 #define NANOSVGRAST_IMPLEMENTATION
 #include "nanosvg/nanosvgrast.h"
 
+#include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/GCode.hpp"
+#include "libslic3r/GCode/WipeTower.hpp"
+#include "libslic3r/GCode/WipeTowerEstimate.hpp"
+#include "libslic3r/Geometry.hpp"
 #include "libslic3r/Preset.hpp"
 #include "libslic3r/Config.hpp"
 #include "libslic3r/PresetBundle.hpp"
@@ -116,15 +120,45 @@ Vec2d printable_area_center(const DynamicPrintConfig &cfg)
     return 0.5 * (lo + hi);
 }
 
+// Put the prime tower where the GUI and CLI would before slicing. The config default (x 15, y 220)
+// lies off any bed shallower than the tower, and generation rejects an off-plate tower instead of
+// exporting it. Beside the centred cube, clear of the edge exclusion strips some beds carry, then
+// pulled inside the printable outline by the tower's own estimated footprint, with a few mm of
+// clearance so the conflict checker never sees the two touch.
+void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d &center)
+{
+    const auto *area = cfg.option<ConfigOptionPoints>("printable_area");
+    if (area == nullptr || area->values.size() < 3)
+        return;
+    const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(cfg, resolve_wipe_tower_type(cfg), {0, 1}, cfg.opt_float("layer_height"), 10.);
+    if (footprint.depth < EPSILON)
+        return;
+    const double margin = WIPE_TOWER_MARGIN + footprint.brim_width;
+    // The position is the tower's own origin; a rotated tower extends from it in another
+    // direction, so place the rotated box's extents rather than the origin.
+    Slic3r::Polygon box({Point::new_scale(0., 0.), Point::new_scale(footprint.width, 0.), Point::new_scale(footprint.width, footprint.depth), Point::new_scale(0., footprint.depth)});
+    box.rotate(Geometry::deg2rad(cfg.opt_float("wipe_tower_rotation_angle")));
+    const BoundingBox local = get_extents(box);
+    const Vec2d       lo    = unscale(local.min);
+    const Vec2d       size  = unscale(local.max) - lo;
+    Vec2d             pos(center.x() + 5. + margin + 5. - lo.x(), center.y() - size.y() / 2. - lo.y());
+    box.translate(Point::new_scale(pos.x(), pos.y()));
+    const Vec2f move = WipeTower::move_box_inside_polygon(get_extents(box), Polygons{Polygon::new_scale(area->values)}, scaled<coord_t>(margin));
+    pos += move.cast<double>();
+    cfg.option<ConfigOptionFloats>("wipe_tower_x", true)->values = {pos.x()};
+    cfg.option<ConfigOptionFloats>("wipe_tower_y", true)->values = {pos.y()};
+}
+
 // Slice one centered cube that switches from filament 1 to filament 2 partway up, so exactly one
 // filament change fires, then export. The change drives the printer's own change_filament_gcode: on a
 // single-nozzle machine it rides the AMS prime tower (append_tcr), on a multi-nozzle machine it routes
 // through the nozzle swap (set_extruder / append_tcr2) - the engine picks the path from the printer's
 // topology, so one model covers both. An undefined placeholder in any shipped custom g-code throws
 // Slic3r::PlaceholderParserError from export.
-std::string slice_two_color_cube_and_export(const DynamicPrintConfig &cfg, bool is_bbl)
+std::string slice_two_color_cube_and_export(DynamicPrintConfig cfg, bool is_bbl)
 {
     const Vec2d center = printable_area_center(cfg);
+    place_wipe_tower(cfg, center);
     TriangleMesh m = make_cube(10, 10, 10);
     m.translate(float(center.x() - 5.), float(center.y() - 5.), 0.f);
 
diff --git a/src/dev-utils/StackWalker.cpp b/src/dev-utils/StackWalker.cpp
index 468e8927a5..3ef983cd86 100644
--- a/src/dev-utils/StackWalker.cpp
+++ b/src/dev-utils/StackWalker.cpp
@@ -364,7 +364,7 @@ void CStackWalker::GetModuleInformation(LPMODULE_INFO pmi)
 
 	if (dwInfoSize > 0)
 	{
-		LPVOID lpData = new byte[dwInfoSize];
+		byte *lpData = new byte[dwInfoSize];
 		ZeroMemory(lpData, dwInfoSize * sizeof(byte));
 
 		if (GetFileVersionInfo(pmi->szModulePath, dwHandle, dwInfoSize, lpData) > 0 )
@@ -425,7 +425,7 @@ LPSTACKINFO CStackWalker::StackWalker(HANDLE hThread, const CONTEXT* context)
 	else
 		c = *context;
 
-	STACKFRAME64 sf = {0};
+	STACKFRAME64 sf = {};
 	DWORD imageType;
 
 //intel X86
diff --git a/src/libslic3r/Algorithm/LineSplit.hpp b/src/libslic3r/Algorithm/LineSplit.hpp
index 58b9fdc34a..e12113fa6c 100644
--- a/src/libslic3r/Algorithm/LineSplit.hpp
+++ b/src/libslic3r/Algorithm/LineSplit.hpp
@@ -49,7 +49,7 @@ SplittedLine split_line(const PathType& path, const ExPolygons& clip, bool close
 
     // Convert the input path into an open ZPath
     ClipperZUtils::ZPath p;
-    p.reserve(path.size() + closed ? 1 : 0);
+    p.reserve(path.size() + (closed ? 1 : 0));
     ClipperLib_Z::cInt z = 0;
     for (const auto& point : path) {
         p.emplace_back(point.x(), point.y(), z);
diff --git a/src/libslic3r/AppConfig.cpp b/src/libslic3r/AppConfig.cpp
index 3919c7b578..33e25b18cd 100644
--- a/src/libslic3r/AppConfig.cpp
+++ b/src/libslic3r/AppConfig.cpp
@@ -42,6 +42,9 @@ namespace Slic3r {
 
 static const std::string VERSION_CHECK_URL = "https://check-version.orcaslicer.com/latest";
 static const std::string PROFILE_UPDATE_URL = "https://check-version.orcaslicer.com/profile";
+
+constexpr const char* CONFIG_ORCA_UPDATER_URL = "orca_updater_url";
+
 static const std::string MODELS_STR = "models";
 
 const std::string AppConfig::SECTION_FILAMENTS = "filaments";
@@ -655,6 +658,11 @@ void AppConfig::set_defaults()
         set_bool("use_printer_agents", false);
     }
 
+    if (get("enable_ota").empty())
+    {
+        set_bool("enable_ota", false);
+    }
+
     // Remove legacy window positions/sizes
     erase("app", "main_frame_maximized");
     erase("app", "main_frame_pos");
@@ -1835,7 +1843,10 @@ std::string AppConfig::version_check_url() const
 
 std::string AppConfig::profile_update_url() const
 {
-    return PROFILE_UPDATE_URL;
+    std::string orca_updater_url = get(CONFIG_ORCA_UPDATER_URL);
+    if (orca_updater_url.empty())
+        return PROFILE_UPDATE_URL;
+    return orca_updater_url;
 }
 
 bool AppConfig::exists()
diff --git a/src/libslic3r/CMakeLists.txt b/src/libslic3r/CMakeLists.txt
index d58c43014b..e734c036fa 100644
--- a/src/libslic3r/CMakeLists.txt
+++ b/src/libslic3r/CMakeLists.txt
@@ -265,6 +265,8 @@ set(lisbslic3r_sources
     GCode/SmallAreaInfillFlowCompensator.hpp
     GCode/SpiralVase.cpp
     GCode/SpiralVase.hpp
+    GCode/WipePathHelpers.cpp
+    GCode/WipePathHelpers.hpp
     GCode/ThumbnailData.cpp
     GCode/ThumbnailData.hpp
     GCode/Thumbnails.cpp
@@ -277,6 +279,8 @@ set(lisbslic3r_sources
     GCode/WipeTower2.hpp
     GCode/WipeTower.cpp
     GCode/WipeTower.hpp
+    GCode/WipeTowerEstimate.cpp
+    GCode/WipeTowerEstimate.hpp
     GCodeWriter.cpp
     GCodeWriter.hpp
     Geometry/ArcWelder.hpp
@@ -305,6 +309,8 @@ set(lisbslic3r_sources
     Layer.cpp
     Layer.hpp
     LayerRegion.cpp
+    LayOnFace.cpp
+    LayOnFace.hpp
     libslic3r.cpp
     libslic3r.h
     Line.cpp
@@ -375,6 +381,8 @@ set(lisbslic3r_sources
     Preset.hpp
     PrincipalComponents2D.cpp
     PrincipalComponents2D.hpp
+    PublishSettings.cpp
+    PublishSettings.hpp
     PrintApply.cpp
     PrintBase.cpp
     PrintBase.hpp
@@ -582,6 +590,12 @@ if (_opts)
     target_compile_options(libslic3r_cgal PRIVATE "${_opts_bad}")
 endif()
 
+if (IS_CLANG_CL)
+    # CGAL passes /fp:strict /fp:except-. clang-cl reports the second as overriding part of
+    # the first; the settings cc1 receives are the same ones MSVC produces from that pair.
+    target_compile_options(libslic3r_cgal PRIVATE -Wno-overriding-option)
+endif ()
+
 target_link_libraries(libslic3r_cgal PRIVATE ${_cgal_tgt} admesh libigl mcut boost_libs)
 
 if (MSVC AND "${CMAKE_SIZEOF_VOID_P}" STREQUAL "4") # 32 bit MSVC workaround
diff --git a/src/libslic3r/Config.cpp b/src/libslic3r/Config.cpp
index 394cfb5b74..52a46dcacf 100644
--- a/src/libslic3r/Config.cpp
+++ b/src/libslic3r/Config.cpp
@@ -7,6 +7,7 @@
 #include <algorithm>
 #include <assert.h>
 #include <fstream>
+#include <sstream>
 #include <iostream>
 #include <iomanip>
 #include <regex>
@@ -1515,6 +1516,19 @@ std::optional<PluginCapabilityRef> parse_capability_ref(const std::string& value
 
 //BBS: add json support
 void ConfigBase::save_to_json(const std::string &file, const std::string &name, const std::string &from, const std::string &version) const
+{
+    // Serialize first: if that throws (invalid UTF-8), the existing file stays untouched.
+    std::ostringstream ss;
+    this->save_to_json(ss, name, from, version);
+    boost::nowide::ofstream c;
+    c.open(file, std::ios::out | std::ios::trunc);
+    c << ss.str();
+    c.close();
+
+    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ":" <<__LINE__ << boost::format(", saved config to %1%\n")%file;
+}
+
+void ConfigBase::save_to_json(std::ostream &os, const std::string &name, const std::string &from, const std::string &version, bool replace_invalid_utf8) const
 {
     json j;
     //record the headers
@@ -1561,12 +1575,7 @@ void ConfigBase::save_to_json(const std::string &file, const std::string &name,
             j["plugins"] = unique_refs;
     }
 
-    boost::nowide::ofstream c;
-    c.open(file, std::ios::out | std::ios::trunc);
-    c << j.dump(1, '\t') << std::endl;
-    c.close();
-
-    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ":" <<__LINE__ << boost::format(", saved config to %1%\n")%file;
+    os << j.dump(1, '\t', false, replace_invalid_utf8 ? json::error_handler_t::replace : json::error_handler_t::strict) << std::endl;
 }
 
 void ConfigBase::save(const std::string &file) const
diff --git a/src/libslic3r/Config.hpp b/src/libslic3r/Config.hpp
index 9e4344820d..6d23ec3770 100644
--- a/src/libslic3r/Config.hpp
+++ b/src/libslic3r/Config.hpp
@@ -1006,6 +1006,7 @@ public:
     int                     getInt() const override { return this->value; }
     void                    setInt(int val) override { this->value = val; }
     ConfigOption*           clone()  const override { return new ConfigOptionInt(*this); }
+    using ConfigOptionSingle<int>::operator==;
     bool                    operator==(const ConfigOptionInt &rhs) const throw() { return this->value == rhs.value; }
 
     std::string serialize() const override
@@ -1048,6 +1049,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionIntsTempl(*this); }
     ConfigOptionIntsTempl&  operator= (const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionVector<int>::operator==;
     bool                    operator==(const ConfigOptionIntsTempl &rhs) const throw() { return this->values == rhs.values; }
     bool                    operator< (const ConfigOptionIntsTempl &rhs) const throw() { return this->values <  rhs.values; }
     // Could a special "nil" value be stored inside the vector, indicating undefined value?
@@ -1137,6 +1139,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionString(*this); }
     ConfigOptionString&     operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionSingle<std::string>::operator==;
     bool                    operator==(const ConfigOptionString &rhs) const throw() { return this->value == rhs.value; }
     bool                    operator< (const ConfigOptionString &rhs) const throw() { return this->value <  rhs.value; }
     bool 					empty() const { return this->value.empty(); }
@@ -1171,6 +1174,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionStrings(*this); }
     ConfigOptionStrings&    operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionVector<std::string>::operator==;
     bool                    operator==(const ConfigOptionStrings &rhs) const throw() { return this->values == rhs.values; }
     bool                    operator< (const ConfigOptionStrings &rhs) const throw() { return this->values <  rhs.values; }
     bool					is_nil(size_t) const override { return false; }
@@ -1215,6 +1219,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPercent(*this); }
     ConfigOptionPercent&    operator= (const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionFloat::operator==;
     bool                    operator==(const ConfigOptionPercent &rhs) const throw() { return this->value == rhs.value; }
     bool                    operator< (const ConfigOptionPercent &rhs) const throw() { return this->value <  rhs.value; }
 
@@ -1257,6 +1262,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPercentsTempl(*this); }
     ConfigOptionPercentsTempl& operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionFloatsTempl<NULLABLE>::operator==;
     bool                    operator==(const ConfigOptionPercentsTempl &rhs) const throw() { return ConfigOptionFloatsTempl<NULLABLE>::vectors_equal(this->values, rhs.values); }
     bool                    operator< (const ConfigOptionPercentsTempl &rhs) const throw() { return ConfigOptionFloatsTempl<NULLABLE>::vectors_lower(this->values, rhs.values); }
 
@@ -1502,6 +1508,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoint(*this); }
     ConfigOptionPoint&      operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionSingle<Vec2d>::operator==;
     bool                    operator==(const ConfigOptionPoint &rhs) const throw() { return this->value == rhs.value; }
     bool                    operator< (const ConfigOptionPoint &rhs) const throw() { return this->value <  rhs.value; }
 
@@ -1539,6 +1546,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoints(*this); }
     ConfigOptionPoints&     operator= (const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionVector<Vec2d>::operator==;
     bool                    operator==(const ConfigOptionPoints &rhs) const throw() { return this->values == rhs.values; }
     bool                    operator< (const ConfigOptionPoints &rhs) const throw()
         { return std::lexicographical_compare(this->values.begin(), this->values.end(), rhs.values.begin(), rhs.values.end(), [](const auto &l, const auto &r){ return l < r; }); }
@@ -1617,6 +1625,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoint3(*this); }
     ConfigOptionPoint3&     operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionSingle<Vec3d>::operator==;
     bool                    operator==(const ConfigOptionPoint3 &rhs) const throw() { return this->value == rhs.value; }
     bool                    operator< (const ConfigOptionPoint3 &rhs) const throw()
         { return this->value.x() < rhs.value.x() || (this->value.x() == rhs.value.x() && (this->value.y() < rhs.value.y() || (this->value.y() == rhs.value.y() && this->value.z() < rhs.value.z()))); }
@@ -1860,6 +1869,7 @@ public:
     bool                    getBool()   const override { return this->value; }
     ConfigOption*           clone()     const override { return new ConfigOptionBool(*this); }
     ConfigOptionBool&       operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionSingle<bool>::operator==;
     bool                    operator==(const ConfigOptionBool &rhs) const throw() { return this->value == rhs.value; }
     bool                    operator< (const ConfigOptionBool &rhs) const throw() { return int(this->value) < int(rhs.value); }
 
@@ -1911,6 +1921,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionBoolsTempl(*this); }
     ConfigOptionBoolsTempl& operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    using ConfigOptionVector<unsigned char>::operator==;
     bool                    operator==(const ConfigOptionBoolsTempl &rhs) const throw() { return this->values == rhs.values; }
     bool                    operator< (const ConfigOptionBoolsTempl &rhs) const throw() { return this->values <  rhs.values; }
     // Could a special "nil" value be stored inside the vector, indicating undefined value?
@@ -2163,6 +2174,7 @@ public:
     ConfigOptionEnumsGenericTempl& operator= (const ConfigOption* opt) { this->set(opt); return *this; }
     bool                        operator< (const ConfigOptionInts& rhs) const throw() { return this->values < rhs.values; }
 
+    using ConfigOptionInts::operator==;
     bool                        operator==(const ConfigOptionInts& rhs) const
     {
         if (rhs.type() != this->type())
@@ -2813,6 +2825,9 @@ public:
 
     //BBS: add json support
     void save_to_json(const std::string &file, const std::string &name, const std::string &from, const std::string &version) const;
+    // Same document, written to a stream. Invalid UTF-8 in a string value throws nlohmann's type_error unless
+    // replace_invalid_utf8 is set, which writes U+FFFD instead (for callers such as stdout with no handler).
+    void save_to_json(std::ostream &os, const std::string &name, const std::string &from, const std::string &version, bool replace_invalid_utf8 = false) const;
 
     // Rebuild the in-memory "plugins" manifest (the "name;uuid;capability" references the plugin
     // dispatchers consume) from the plugin-backed options via the registered resolver. save_to_json()
diff --git a/src/libslic3r/Emboss.cpp b/src/libslic3r/Emboss.cpp
index ef144b48d3..34d9a93590 100644
--- a/src/libslic3r/Emboss.cpp
+++ b/src/libslic3r/Emboss.cpp
@@ -968,10 +968,10 @@ EmbossStyles Emboss::get_font_list_by_register() {
 }
 
 // TODO: Fix global function
-bool CALLBACK EnumFamCallBack(LPLOGFONT       lplf,
-                              LPNEWTEXTMETRIC lpntm,
-                              DWORD           FontType,
-                              LPVOID          aFontList)
+int CALLBACK EnumFamCallBack(const LOGFONT    *lplf,
+                             const TEXTMETRIC *lpntm,
+                             DWORD             FontType,
+                             LPARAM            aFontList)
 {
     std::vector<std::wstring> *fontList =
         (std::vector<std::wstring> *) (aFontList);
@@ -988,7 +988,7 @@ EmbossStyles Emboss::get_font_list_by_enumeration() {
 
     HDC                       hDC = GetDC(NULL);
     std::vector<std::wstring> font_names;
-    EnumFontFamilies(hDC, (LPCTSTR) NULL, (FONTENUMPROC) EnumFamCallBack,
+    EnumFontFamilies(hDC, (LPCTSTR) NULL, EnumFamCallBack,
                      (LPARAM) &font_names);
 
     EmbossStyles font_list;
diff --git a/src/libslic3r/ExtrusionEntity.hpp b/src/libslic3r/ExtrusionEntity.hpp
index e8348b3bd5..de80247bce 100644
--- a/src/libslic3r/ExtrusionEntity.hpp
+++ b/src/libslic3r/ExtrusionEntity.hpp
@@ -454,6 +454,10 @@ class ExtrusionLoop : public ExtrusionEntity
 {
 public:
     ExtrusionPaths paths;
+    // ORCA: Set on a loop extruded entirely in mid air and out of reach of the layer below: it has
+    // nothing to lean on until this layer is bridged, so the G-code writer holds it back until the
+    // infill is down. See defer_unsupported_loops() in PerimeterGenerator.cpp.
+    bool print_after_infill = false;
 
     ExtrusionLoop(ExtrusionLoopRole role = elrDefault) : m_loop_role(role) {}
     ExtrusionLoop(const ExtrusionPaths &paths, ExtrusionLoopRole role = elrDefault) : paths(paths), m_loop_role(role) {}
diff --git a/src/libslic3r/Fill/Fill.cpp b/src/libslic3r/Fill/Fill.cpp
index dc772580ca..28fabed8af 100644
--- a/src/libslic3r/Fill/Fill.cpp
+++ b/src/libslic3r/Fill/Fill.cpp
@@ -11,7 +11,7 @@
 
 #include "AABBTreeLines.hpp"
 #include "ExtrusionEntity.hpp"
-#include "FillBase.hpp"
+#include "Fill.hpp"
 #include "FillRectilinear.hpp"
 #include "FillLightning.hpp"
 #include "FillConcentricInternal.hpp"
@@ -1234,6 +1234,33 @@ std::vector<SurfaceFill> group_fills(const Layer &layer, LockRegionParam &lock_p
 	return surface_fills;
 }
 
+// Orca: Anchors and printed infill must share the same body origin. Keep the choice
+// here so per-model surface centering and separated sparse infill cannot drift apart.
+static BoundingBox infill_bounding_box(const Layer &layer, const SurfaceFill &fill, const ExPolygon &expoly, BoundingBox bbox)
+{
+    const auto &params = fill.params;
+    const auto &config = layer.regions()[fill.region_id]->region().config();
+    const bool external = params.extrusion_role == erTopSolidInfill || params.extrusion_role == erBottomSurface;
+    const bool per_model = external && params.center_of_surface_pattern == CenterOfSurfacePattern::Each_Model &&
+                           (params.pattern == ipArchimedeanChords || params.pattern == ipOctagramSpiral);
+    const bool separate = !external && params.separated_infills &&
+                          (is_separable_infill_pattern(params.pattern) || !config.solid_infill_rotate_template.value.empty() ||
+                           !config.sparse_infill_rotate_template.value.empty());
+    if (per_model || separate) {
+        double best_overlap = 0.;
+        for (size_t i = 0; i < layer.lslices.size() && i < layer.lslices_separated_component_bboxes.size(); ++i) {
+            const double overlap = area(intersection_ex(layer.lslices[i], expoly));
+            if (overlap > best_overlap) {
+                best_overlap = overlap;
+                const Point center = layer.lslices_separated_component_bboxes[i].center();
+                bbox = layer.object()->bounding_box();
+                bbox.translate(center.x(), center.y());
+            }
+        }
+    }
+    return bbox;
+}
+
 #ifdef SLIC3R_DEBUG_SLICE_PROCESSING
 void export_group_fills_to_svg(const char *path, const std::vector<SurfaceFill> &fills)
 {
@@ -1353,19 +1380,9 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
 
         // Orca: Checking the filling of a centered surface by drawing for each model parts
         bool is_top_or_bottom = params.extrusion_role == erTopSolidInfill || params.extrusion_role == erBottomSurface;
-        bool is_centered_infill = surface_fill.params.pattern == ipArchimedeanChords || surface_fill.params.pattern == ipOctagramSpiral;
         if (is_top_or_bottom) {
             params.center_of_surface_pattern = surface_fill.params.center_of_surface_pattern; // Orca: center of surface pattern
         }
-        // Orca: Each_Model centers the pattern on each model part's bbox; Each_Surface / Each_Assembly
-        // fall through to the default (whole-object) bounding box below.
-        bool is_per_model_center = is_top_or_bottom && params.center_of_surface_pattern == CenterOfSurfacePattern::Each_Model && is_centered_infill;
-        bool is_separate_infill = !is_top_or_bottom && surface_fill.params.separated_infills &&
-                                  (
-                                  is_separable_infill_pattern(surface_fill.params.pattern) ||
-                                  params.config->solid_infill_rotate_template != "" ||
-                                  params.config->sparse_infill_rotate_template != "" );
-
         if( surface_fill.params.pattern == ipLockedZag ) {
 			params.locked_zag = true;
             params.infill_lock_depth = surface_fill.params.infill_lock_depth;
@@ -1389,34 +1406,8 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
 			params.can_reverse = false;
 		for (ExPolygon& expoly : surface_fill.expolygons) {
 
-            // Orca: separate infill / per-model pattern centering.
-            //
-            // Center the pattern on each connected body of the object independently, so every piece
-            // is filled exactly as if it were sliced on its own: touching/overlapping parts merge
-            // into one body sharing a center, while separate parts and disconnected islands (even
-            // interleaved-but-not-touching ones, e.g. chain links) each get their own. The body each
-            // island belongs to, and its full bounding box, were resolved in 3D by PrintObject::
-            // infill() (lslices_separated_component_bboxes, aligned with this layer's lslices). We
-            // match this fill region to the island it overlaps most, then re-use the whole-object
-            // bounding box (origin-centered — identical extent to the default, so coverage and cost
-            // are unchanged) re-centered on that body.
-            if (is_per_model_center || is_separate_infill) {
-                double      best_overlap = 0.;
-                BoundingBox best_component;
-                for (size_t r = 0; r < this->lslices.size() && r < this->lslices_separated_component_bboxes.size(); ++ r) {
-                    const double overlap = area(intersection_ex(this->lslices[r], expoly));
-                    if (overlap > best_overlap) {
-                        best_overlap   = overlap;
-                        best_component = this->lslices_separated_component_bboxes[r];
-                    }
-                }
-                if (best_component.defined) {
-                    const Point c         = best_component.center();
-                    BoundingBox part_bbox = bbox; // origin-centered, whole-object extent (from above)
-                    part_bbox.translate(c.x(), c.y()); // re-center on this body
-                    f->set_bounding_box(part_bbox);
-                }
-            } // - End: separate infill / per-model pattern centering
+            // Orca: Reuse the body origin used for bridge anchoring, resetting it for each surface.
+            f->set_bounding_box(infill_bounding_box(*this, surface_fill, expoly, bbox));
 
             f->no_overlap_expolygons = intersection_ex(surface_fill.no_overlap_expolygons, ExPolygons() = {expoly}, ApplySafetyOffset::Yes);
             if (params.symmetric_infill_y_axis) {
@@ -1583,8 +1574,14 @@ Polylines Layer::generate_sparse_infill_polylines_for_anchoring(FillAdaptive::Oc
         params.multiline         = surface_fill.params.multiline;
         params.gyroid_optimized          = surface_fill.params.gyroid_optimized;
         params.smooth_factor             = surface_fill.params.smooth_factor;
+        // Orca: Match make_fills() when choosing the origin of plane-path patterns.
+        // Without the sparse extrusion role, the filler uses each surface's bounds
+        // instead of the object's bounds, so bridge anchors shift away from printed infill.
+        params.extrusion_role            = surface_fill.params.extrusion_role;
 
         for (ExPolygon &expoly : surface_fill.expolygons) {
+            // Orca: Match the per-body origin of make_fills() before generating physical anchors.
+            f->set_bounding_box(infill_bounding_box(*this, surface_fill, expoly, bbox));
             // Spacing is modified by the filler to indicate adjustments. Reset it for each expolygon.
             f->spacing                     = surface_fill.params.spacing;
             surface_fill.surface.expolygon = std::move(expoly);
@@ -1598,6 +1595,25 @@ Polylines Layer::generate_sparse_infill_polylines_for_anchoring(FillAdaptive::Oc
     return sparse_infill_polylines;
 }
 
+// Returns the filament id (1-based) the region is ironed with, or -1 when the
+// region is not ironed. AllSolid always irons. TopSurfaces and TopmostOnly need
+// either some top shells or, in spiral mode, more than one bottom shell, and
+// TopmostOnly additionally needs the layer to be the topmost one.
+int Layer::choose_ironing_extruder(const PrintRegionConfig &cfg,
+                                   bool spiral_mode,
+                                   bool is_topmost_layer)
+{
+    if (cfg.ironing_type == IroningType::NoIroning)
+        return -1;
+    const bool gate = (cfg.ironing_type == IroningType::AllSolid)
+        || ((cfg.top_shell_layers > 0 || (spiral_mode && cfg.bottom_shell_layers > 1))
+            && (cfg.ironing_type == IroningType::TopSurfaces
+                || (cfg.ironing_type == IroningType::TopmostOnly && is_topmost_layer)));
+    if (!gate)
+        return -1;
+    return cfg.top_surface_filament_id;
+}
+
 // Create ironing extrusions over top surfaces.
 void Layer::make_ironing()
 {
@@ -1667,19 +1683,10 @@ void Layer::make_ironing()
 		if (! layerm->slices.empty()) {
 			IroningParams ironing_params;
 			const PrintRegionConfig &config = layerm->region().config();
-			if (config.ironing_type != IroningType::NoIroning &&
-			    (config.ironing_type == IroningType::AllSolid ||
-				    ((config.top_shell_layers > 0 || (this->object()->print()->config().spiral_mode && config.bottom_shell_layers > 1)) &&
-					    (config.ironing_type == IroningType::TopSurfaces ||
-					        (config.ironing_type == IroningType::TopmostOnly && layerm->layer()->upper_layer == nullptr))))) {
-				if (config.outer_wall_filament_id == config.top_surface_filament_id || config.wall_loops == 0) {
-					// Iron the whole face.
-					ironing_params.extruder = config.top_surface_filament_id;
-				} else {
-					// Iron just the infill.
-					ironing_params.extruder = config.top_surface_filament_id;
-				}
-			}
+			ironing_params.extruder = Layer::choose_ironing_extruder(
+				config,
+				/*spiral_mode=*/this->object()->print()->config().spiral_mode,
+				/*is_topmost_layer=*/layerm->layer()->upper_layer == nullptr);
 			if (ironing_params.extruder != -1) {
 				//TODO just_infill is currently not used.
 				ironing_params.just_infill 	= false;
diff --git a/src/libslic3r/Fill/Fill.hpp b/src/libslic3r/Fill/Fill.hpp
index e92ab2dee5..b183cf0253 100644
--- a/src/libslic3r/Fill/Fill.hpp
+++ b/src/libslic3r/Fill/Fill.hpp
@@ -14,6 +14,12 @@ namespace Slic3r {
 
 class ExtrusionEntityCollection;
 class LayerRegion;
+class PrintObject;
+
+// Orca: Share the layer rotation calculation between infill generation and internal
+// bridge angle selection so both interpret rotation templates in the same way.
+double calculate_infill_rotation_angle(const PrintObject *object, size_t layer_id,
+                                      const double &fixed_infill_angle, const std::string &template_string);
 
 // An interface class to Perl, aggregating an instance of a Fill and a FillData.
 class Filler
diff --git a/src/libslic3r/Fill/FillAdaptive.cpp b/src/libslic3r/Fill/FillAdaptive.cpp
index 344bb529f0..dbaa1f2ac9 100644
--- a/src/libslic3r/Fill/FillAdaptive.cpp
+++ b/src/libslic3r/Fill/FillAdaptive.cpp
@@ -1395,8 +1395,8 @@ void Filler::_fill_surface_single(
         }
 #endif /* ADAPTIVE_CUBIC_INFILL_DEBUG_OUTPUT */
 
-        const auto hook_length     = coordf_t(std::min<float>(std::numeric_limits<coord_t>::max(), scale_(params.anchor_length)));
-        const auto hook_length_max = coordf_t(std::min<float>(std::numeric_limits<coord_t>::max(), scale_(params.anchor_length_max)));
+        const auto hook_length     = coordf_t(scale_(params.anchor_length));
+        const auto hook_length_max = coordf_t(scale_(params.anchor_length_max));
 
     Polylines all_polylines_with_hooks = all_polylines.size() > 1 ? connect_lines_using_hooks(std::move(all_polylines), expolygon, this->spacing, hook_length, hook_length_max) : std::move(all_polylines);
 
diff --git a/src/libslic3r/Fill/FillRectilinear.cpp b/src/libslic3r/Fill/FillRectilinear.cpp
index db340748ab..7edf350081 100644
--- a/src/libslic3r/Fill/FillRectilinear.cpp
+++ b/src/libslic3r/Fill/FillRectilinear.cpp
@@ -3090,10 +3090,11 @@ bool FillRectilinear::fill_surface_trapezoidal(
     case 0: // Grid / Trapezoidal
     {
         // Generate a non-crossing trapezoidal pattern to avoid overextrusion at intersections when `multiline > 1`.
-        //         P2--P3
-        //        /      \
-        //  P0_P1/        \P4_
-        //
+        /*
+         *         P2--P3
+         *        /      \
+         *  P0_P1/        \P4_
+         */
         // P0xP1x=P4xP0x=d1/2
         // P2xP3x=d1
         // P1yP2y=P2yP3y=d2
@@ -3171,10 +3172,12 @@ bool FillRectilinear::fill_surface_trapezoidal(
     case 1: // Triangular
     {
         // Generate a non-crossing trapezoidal pattern with a base line below.
-        //      P1-P2
-        //     /     \
-        //  P0/       \P3_P4
-        //  ----------------
+        /*
+         *      P1-P2
+         *     /     \
+         *  P0/       \P3_P4
+         *  ----------------
+         */
         // P1xP2x=P3xP4x=d2
         // P0yP1y=P2yP3y=h-2d1
         //
diff --git a/src/libslic3r/FlushVolCalc.cpp b/src/libslic3r/FlushVolCalc.cpp
index 9bdbc1737d..635328f5ab 100644
--- a/src/libslic3r/FlushVolCalc.cpp
+++ b/src/libslic3r/FlushVolCalc.cpp
@@ -40,8 +40,8 @@ static float DeltaHS_BBS(float h1, float s1, float v1, float h2, float s2, float
     return std::min(1.2f, dxy);
 }
 
-FlushVolCalculator::FlushVolCalculator(int min, int max, int flush_dataset, float multiplier)
-    :m_min_flush_vol(min), m_max_flush_vol(max), m_multiplier(multiplier), m_flush_dataset(flush_dataset)
+FlushVolCalculator::FlushVolCalculator(int min, int max, int flush_dataset)
+    :m_min_flush_vol(min), m_max_flush_vol(max), m_flush_dataset(flush_dataset)
 {
 }
 
diff --git a/src/libslic3r/FlushVolCalc.hpp b/src/libslic3r/FlushVolCalc.hpp
index 46d04d13ff..73baca5a89 100644
--- a/src/libslic3r/FlushVolCalc.hpp
+++ b/src/libslic3r/FlushVolCalc.hpp
@@ -15,7 +15,7 @@ extern const int g_max_flush_volume;
 class FlushVolCalculator
 {
 public:
-    FlushVolCalculator(int min, int max, int flush_dataset, float multiplier = 1.0f);
+    FlushVolCalculator(int min, int max, int flush_dataset);
     ~FlushVolCalculator()
     {
     }
@@ -32,7 +32,6 @@ public:
 private:
     int m_min_flush_vol;
     int m_max_flush_vol;
-    float m_multiplier;
     int m_flush_dataset;
 };
 
diff --git a/src/libslic3r/Format/bbs_3mf.cpp b/src/libslic3r/Format/bbs_3mf.cpp
index fe497c9223..09899aa4c2 100644
--- a/src/libslic3r/Format/bbs_3mf.cpp
+++ b/src/libslic3r/Format/bbs_3mf.cpp
@@ -102,45 +102,6 @@ struct ZipUnicodePathExtraField
     }
 };
 
-// Validate that a relative file path does not escape the root directory via path traversal.
-static bool is_path_within_root(const std::string& file_path, const boost::filesystem::path& root)
-{
-    if (file_path.empty())
-        return false;
-
-    boost::filesystem::path p(file_path);
-    if (p.is_absolute())
-        return false;
-
-    // Reject any path component that is ".."
-    for (const auto& component : p) {
-        if (component == "..")
-            return false;
-    }
-
-    // Resolve the full path and verify it starts with the canonical root (also catches symlink escapes)
-    try {
-        boost::filesystem::path full_path = root / p;
-        boost::filesystem::path canonical_root = boost::filesystem::weakly_canonical(root);
-        boost::filesystem::path canonical_full = boost::filesystem::weakly_canonical(full_path);
-
-        auto root_str = canonical_root.string();
-        auto full_str = canonical_full.string();
-        if (full_str.length() < root_str.length())
-            return false;
-        if (full_str.compare(0, root_str.length(), root_str) != 0)
-            return false;
-        // Ensure it's a proper prefix (not just a substring of a longer directory name)
-        if (full_str.length() > root_str.length() &&
-            full_str[root_str.length()] != boost::filesystem::path::preferred_separator)
-            return false;
-    } catch (const boost::filesystem::filesystem_error&) {
-        return false;
-    }
-
-    return true;
-}
-
 // VERSION NUMBERS
 // 0 : .3mf, files saved by older slic3r or other applications. No version definition in them.
 // 1 : Introduction of 3mf versioning. No other change in data saved into 3mf files.
@@ -685,6 +646,11 @@ bool bbs_is_valid_object_type(const std::string& type)
 
 namespace Slic3r {
 
+bool is_published_3mf_flag(const std::string &value)
+{
+    return value == "1";
+}
+
 void PlateData::parse_filament_info(GCodeProcessorResult *result)
 {
     if (!result) return;
@@ -1221,6 +1187,20 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         // add backup & restore logic
         bool _load_model_from_file(std::string filename, Model& model, PlateDataPtrs& plate_data_list, std::vector<Preset*>& project_presets, DynamicPrintConfig& config, ConfigSubstitutionContext& config_substitutions, Import3mfProgressFn proFn = nullptr,
             BBLProject* project = nullptr, int plate_id = 0);
+
+        // A minimal published 3MF carries no slicer tags (any tag would make old receivers show
+        // a baked-in, wrong "old version" popup on their geometry-only fallback), so it
+        // classifies as From_Other. It is still a fully structured OrcaSlicer file though:
+        // identified by its own metadata, it keeps BBS-grade geometry handling (no instance
+        // splitting, no transform baking, no renaming) in this build. Old receivers without the
+        // publish feature don't know the metadata and take their third-party geometry path.
+        // Reads the parse-time metadata: the model XML carries it before its resources, while
+        // m_model->model_info is only filled in after the whole XML has been parsed.
+        bool _is_published_3mf() const {
+            const auto it = this->model_info.metadata_items.find(ORCA_PUBLISHED_TAG);
+            return it != this->model_info.metadata_items.end() && is_published_3mf_flag(it->second);
+        }
+
         bool _is_svg_shape_file(const std::string &filename) const;
         bool _extract_from_archive(mz_zip_archive& archive, std::string const & path, std::function<bool (mz_zip_archive& archive, const mz_zip_archive_file_stat& stat)>, bool restore = false);
         bool _extract_xml_from_archive(mz_zip_archive& archive, std::string const & path, XML_StartElementHandler start_handler, XML_EndElementHandler end_handler);
@@ -2054,7 +2034,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
 
         lock.close();
 
-        if (!m_is_bbl_3mf) {
+        if (!m_is_bbl_3mf && !_is_published_3mf()) {
             // if the 3mf was not produced by OrcaSlicer and there is more than one instance,
             // split the object in as many objects as instances
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ":" << __LINE__ << boost::format(", found 3mf from other vendor, split as instance");
@@ -3618,7 +3598,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
             m_index_paths.insert({ object.first.second, object.first.first});
         }
 
-        if (!m_is_bbl_3mf) {
+        if (!m_is_bbl_3mf && !_is_published_3mf()) {
             // if the 3mf was not produced by OrcaSlicer and there is only one object,
             // set the object name to match the filename
             if (m_model->objects.size() == 1)
@@ -5341,7 +5321,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
 
             TriangleMesh triangle_mesh(std::move(its), volume_data.mesh_stats);
 
-            if (!m_is_bbl_3mf) {
+            if (!m_is_bbl_3mf && !_is_published_3mf()) {
                 // if the 3mf was not produced by OrcaSlicer and there is only one instance,
                 // bake the transformation into the geometry to allow the reload from disk command
                 // to work properly
@@ -5987,6 +5967,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         bool m_save_gcode { false };        // whether to save gcode for normal save
         bool m_skip_model { false };        // skip model when exporting .gcode.3mf
         bool m_skip_auxiliary { false };    // skip normal axuiliary files
+        bool m_minimal_published { false }; // published 3MF: omit the project config, the embedded preset files and the slicer tags
         bool m_use_loaded_id { false };        // whether to use loaded id for identify_id
         bool m_share_mesh { false };        // whether to share mesh between objects
         std::string m_thumbnail_middle = PRINTER_THUMBNAIL_MIDDLE_FILE;
@@ -6087,6 +6068,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         m_skip_auxiliary = store_params.strategy & SaveStrategy::SkipAuxiliary;
         m_share_mesh       = store_params.strategy & SaveStrategy::ShareMesh;
         m_from_backup_save = store_params.strategy & SaveStrategy::Backup;
+        m_minimal_published = store_params.strategy & SaveStrategy::MinimalPublished;
 
         m_use_loaded_id = store_params.strategy & SaveStrategy::UseLoadedId;
 
@@ -6501,7 +6483,10 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
 
             // Adds slic3r print config file ("Metadata/Slic3r_PE.config").
             // This file contains the content of FullPrintConfig / SLAFullPrintConfig.
-            if (config != nullptr) {
+            // Omitted for minimal published 3MF: OrcaSlicer versions without the publish feature
+            // then fall back to importing the geometry only, and new versions read the published
+            // payload from the model metadata instead.
+            if (config != nullptr && !m_minimal_published) {
                 // BBS: change to json format
                 // if (!_add_print_config_file_to_archive(archive, *config)) {
                 if (!_add_project_config_file_to_archive(archive, *config, model)) { return false; }
@@ -6514,8 +6499,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
                 if (cb_cancel) return false;
             }
 
-            // BBS: add project config
-            if (project_presets.size() > 0) {
+            // BBS: add project config (omitted for minimal published 3MF)
+            if (!m_minimal_published && project_presets.size() > 0) {
                 // BBS: add project embedded preset files
                 _add_project_embedded_presets_to_archive(archive, model, project_presets);
 
@@ -6987,10 +6972,31 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
                 // Orca: PRIVACY: do not store creation & modification date in 3mf
                 metadata_item_map[BBL_CREATION_DATE_TAG] = "";
                 metadata_item_map[BBL_MODIFICATION_TAG]  = "";
-                // Orca: Write the BambuStudio compatibility version string using SLIC3R_VERSION
-                metadata_item_map[BBL_APPLICATION_TAG] = (boost::format("%1%-%2%") % "BambuStudio" % SLIC3R_VERSION).str();
+                // Orca: Write the BambuStudio compatibility version string using SLIC3R_VERSION.
+                // A minimal published 3MF writes no slicer tags at all: any tag would route old
+                // receivers onto a geometry-only fallback whose baked-in popup misreports the
+                // file ("old OrcaSlicer version" / "BambuStudio"), while tag-less files classify
+                // as From_Other and import the geometry silently.
+                if (m_minimal_published) {
+                    // metadata_item_map is seeded from the input file's metadata_items above, so a
+                    // project opened from a regular Orca/BBS 3MF still carries the slicer-identifying
+                    // tags it came with. Erase every one of them - not just the two most common -
+                    // so a published 3MF is fully tag-less: old receivers classify it as From_Other
+                    // and import the geometry silently instead of showing a baked-in "old version"
+                    // popup, and no version marker survives to seed a later re-save.
+                    metadata_item_map.erase(BBL_APPLICATION_TAG);
+                    metadata_item_map.erase(ORCASLICER_TAG);
+                    metadata_item_map.erase(BBS_3MF_VERSION);
+                    metadata_item_map.erase(BBS_3MF_VERSION1);
+                } else {
+                    metadata_item_map[BBL_APPLICATION_TAG] = (boost::format("%1%-%2%") % "BambuStudio" % SLIC3R_VERSION).str();
+                }
             }
-            metadata_item_map[BBS_3MF_VERSION] = std::to_string(VERSION_BBS_3MF);
+            // The Bambu 3MF version marker is part of the slicer identity: omit it for a minimal
+            // published file along with the tags erased above (skipping the overwrite alone would
+            // leave the value the source file seeded into metadata_item_map).
+            if (!m_minimal_published)
+                metadata_item_map[BBS_3MF_VERSION] = std::to_string(VERSION_BBS_3MF);
 
             if (!model.mk_name.empty()) {
                 metadata_item_map[BBL_MAKERLAB_TAG] = xml_escape(model.mk_name);
@@ -7013,7 +7019,11 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
                 BOOST_LOG_TRIVIAL(info) << "bbs_3mf: save key= " << item.first << ", value = " << item.second;
                 stream << " <" << METADATA_TAG << " name=\"" << item.first << "\">"
                        << xml_escape(item.second) << "</" << METADATA_TAG << ">\n";
-                if (item.first == BBL_APPLICATION_TAG) {
+                if (item.first == BBL_APPLICATION_TAG && !m_minimal_published) {
+                    // The OrcaSlicer tag is only written for files that carry the Application
+                    // tag, which a minimal published 3MF erases (see the map assignment above):
+                    // the explicit !m_minimal_published guard keeps the tag-less guarantee from
+                    // depending on that erase happening to run first.
                     stream << " <" << METADATA_TAG << " name=\"" << ORCASLICER_TAG << "\">"
                            << xml_escape(SoftFever_VERSION) << "</" << METADATA_TAG << ">\n";
                 }
@@ -8866,7 +8876,7 @@ public:
         auto model = object.get_model();
         auto o = m_temp_model.add_object(object);
         int backup_id = model->get_object_backup_id(object);
-        push_task({ AddObject, (size_t) backup_id, object.get_model()->get_backup_path(), o, 1 });
+        push_task({ AddObject, (size_t) backup_id, object.get_model()->get_backup_path(), o, { 1 } });
     }
 
     void remove_object_mesh(ModelObject& object) {
@@ -8876,7 +8886,7 @@ public:
     void backup_soon() {
         boost::lock_guard lock(m_mutex);
         m_other_changes_backup = true;
-        m_tasks.push_back({ Backup, 0, std::string(), nullptr, ++m_task_seq });
+        m_tasks.push_back({ Backup, 0, std::string(), nullptr, { ++m_task_seq } });
         m_cond.notify_all();
     }
 
@@ -8894,7 +8904,7 @@ public:
             m_ui_tasks.clear();
             m_tasks.clear();
         }
-        m_tasks.push_back({ RemoveBackup, model.id().id, model.get_backup_path(), nullptr, removeAll });
+        m_tasks.push_back({ RemoveBackup, model.id().id, model.get_backup_path(), nullptr, { removeAll } });
         ++m_task_seq;
         if (model.is_need_backup()) {
             m_other_changes = false;
@@ -9109,7 +9119,7 @@ public:
                 else
                     m_cond.wait(lock);
                 if (m_interval > 0 && boost::get_system_time() > m_next_backup) {
-                    m_tasks.push_back({ Backup, 0, std::string(), nullptr, ++m_task_seq });
+                    m_tasks.push_back({ Backup, 0, std::string(), nullptr, { ++m_task_seq } });
                     m_next_backup += boost::posix_time::seconds(m_interval);
                     // Maybe wakeup from power sleep
                     if (m_next_backup < boost::get_system_time())
@@ -9205,6 +9215,126 @@ std::string bbs_3mf_get_thumbnail(const char *path)
     return data;
 }
 
+namespace {
+
+// Parses just the model-file <metadata> elements, mirroring the importer's
+// _handle_start_metadata/_handle_end_metadata (attribute-order independent, entity-unescaped,
+// whitespace tolerant). Stops the parser as soon as the published flag node is read so the
+// geometry/resources that follow are skipped, which keeps the per-file cost small.
+struct PublishedXmlProbe
+{
+    XML_Parser parser{nullptr};
+    bool       in_metadata{false};
+    bool       found{false};
+    bool       published{false};
+    std::string curr_name;
+    std::string curr_value;
+
+    static std::string attribute(const char** attrs, const char* key)
+    {
+        if (attrs == nullptr)
+            return std::string();
+        // expat hands the attrs as a NULL-terminated {name, value, ...} array.
+        for (unsigned int a = 0; attrs[a] != nullptr; a += 2)
+            if (::strcmp(attrs[a], key) == 0 && attrs[a + 1] != nullptr)
+                return attrs[a + 1];
+        return std::string();
+    }
+
+    static void XMLCALL start(void* user_data, const char* name, const char** attrs)
+    {
+        auto* self = static_cast<PublishedXmlProbe*>(user_data);
+        if (::strcmp(name, METADATA_TAG) == 0) {
+            self->in_metadata = true;
+            self->curr_name   = attribute(attrs, NAME_ATTR);
+            self->curr_value.clear();
+        } else {
+            self->in_metadata = false;
+        }
+    }
+
+    static void XMLCALL characters(void* user_data, const XML_Char* s, int len)
+    {
+        auto* self = static_cast<PublishedXmlProbe*>(user_data);
+        if (self->in_metadata)
+            self->curr_value.append(s, len);
+    }
+
+    static void XMLCALL end(void* user_data, const char* name)
+    {
+        auto* self = static_cast<PublishedXmlProbe*>(user_data);
+        if (!self->in_metadata || ::strcmp(name, METADATA_TAG) != 0)
+            return;
+        self->in_metadata = false;
+        if (self->curr_name == ORCA_PUBLISHED_TAG) {
+            self->published = is_published_3mf_flag(xml_unescape(self->curr_value));
+            self->found     = true;
+            if (self->parser != nullptr)
+                XML_StopParser(self->parser, false);
+        }
+    }
+};
+
+} // namespace
+
+bool bbs_3mf_is_published(const std::string &path)
+{
+    mz_zip_archive archive;
+    mz_zip_zero_struct(&archive);
+
+    struct close_lock
+    {
+        mz_zip_archive *archive;
+        void            close()
+        {
+            if (archive) {
+                close_zip_reader(archive);
+                archive = nullptr;
+            }
+        }
+        ~close_lock() { close(); }
+    } lock{&archive};
+
+    if (!open_zip_reader(&archive, path))
+        return false;
+
+    // Read just the model XML (the metadata node sits before the resources, so the probe below
+    // stops early) rather than by a raw substring match; no geometry parsing.
+    int index = mz_zip_reader_locate_file(&archive, MODEL_FILE.c_str(), nullptr, 0);
+    if (index < 0)
+        return false;
+    mz_zip_archive_file_stat stat;
+    if (!mz_zip_reader_file_stat(&archive, index, &stat))
+        return false;
+    std::string xml(stat.m_uncomp_size, '\0');
+    if (!mz_zip_reader_extract_to_mem(&archive, index, xml.data(), xml.size(), 0))
+        return false;
+
+    XML_Parser parser = XML_ParserCreate(nullptr);
+    if (parser == nullptr)
+        return false;
+
+    PublishedXmlProbe probe;
+    probe.parser = parser;
+    XML_SetUserData(parser, &probe);
+    XML_SetElementHandler(parser, PublishedXmlProbe::start, PublishedXmlProbe::end);
+    XML_SetCharacterDataHandler(parser, PublishedXmlProbe::characters);
+    // Never resolve external entities from a file we are only probing.
+    XML_SetExternalEntityRefHandler(parser, nullptr);
+    XML_SetEntityDeclHandler(parser, nullptr);
+
+    const XML_Status status = XML_Parse(parser, xml.data(), static_cast<int>(xml.size()), 1);
+    // XML_StopParser(parser, false) from the end handler makes XML_Parse return
+    // XML_STATUS_ERROR with XML_ERROR_ABORTED - treat that as success (we stopped on the flag).
+    const bool parse_ok = (status == XML_STATUS_OK) ||
+                          (XML_GetErrorCode(parser) == XML_ERROR_ABORTED && probe.found);
+    XML_ParserFree(parser);
+
+    if (!parse_ok)
+        return false;
+    return probe.published;
+}
+
 bool load_gcode_3mf_from_stream(std::istream &data, DynamicPrintConfig *config, Model *model, PlateDataPtrs *plate_data_list, Semver *file_version)
 {
     CNumericLocalesSetter locales_setter;
diff --git a/src/libslic3r/Format/bbs_3mf.hpp b/src/libslic3r/Format/bbs_3mf.hpp
index 7f5bb8c78d..768ae7bcfe 100644
--- a/src/libslic3r/Format/bbs_3mf.hpp
+++ b/src/libslic3r/Format/bbs_3mf.hpp
@@ -159,12 +159,28 @@ enum class SaveStrategy
     SkipAuxiliary       = 1 << 9,
     UseLoadedId         = 1 << 10,
     ShareMesh           = 1 << 11,
+    // Keep this separate from SplitModel, which uses the 0x1000 bit as part of its
+    // production-extension value.
+    MinimalPublished    = 1 << 13,
 
     SplitModel = 0x1000 | ProductionExt,
     Encrypted  = SecureContentExt | SplitModel,
     Backup = 0x10000 | WithGcode | Silence | SkipStatic | SplitModel,
 };
 
+// Model metadata keys of a "published" 3MF (see MinimalPublished): the flag marks a minimal,
+// tag-less publish export, the others carry the author-selected settings payload. Namespaced
+// with the "orca_published" prefix because metadata_items round-trips verbatim through other
+// slicers, where a bare "published" key could collide.
+inline constexpr const char *ORCA_PUBLISHED_TAG          = "orca_published";
+inline constexpr const char *ORCA_PUBLISHED_KEYS_TAG     = "orca_published_keys";
+inline constexpr const char *ORCA_PUBLISHED_MATERIAL_TAG = "orca_published_material_keys";
+inline constexpr const char *ORCA_PUBLISHED_CONFIG_TAG   = "orca_published_config";
+
+// Published files are produced with "1". The importer and the GUI loader both gate on this
+// exact value, so a "0"/"false"/unknown value is rejected consistently.
+bool is_published_3mf_flag(const std::string &value);
+
 inline SaveStrategy operator | (SaveStrategy lhs, SaveStrategy rhs)
 {
     using T = std::underlying_type_t <SaveStrategy>;
@@ -277,6 +293,9 @@ extern bool load_bbs_3mf(const char* path, DynamicPrintConfig* config, ConfigSub
 
 extern std::string bbs_3mf_get_thumbnail(const char * path);
 
+// Lightweight check: does this 3mf carry the "published" (orca_published == "1") marker? Only reads the 3D/3dmodel.model metadata node
+extern bool bbs_3mf_is_published(const std::string &path);
+
 extern bool load_gcode_3mf_from_stream(std::istream & data, DynamicPrintConfig* config, Model* model, PlateDataPtrs* plate_data_list,
        Semver* file_version);
 
diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index e9cdb620e0..81fc81b488 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -1,5 +1,6 @@
 #include "BoundingBox.hpp"
 #include "Config.hpp"
+#include "GCode/WipePathHelpers.hpp"
 #include "GCodeWriter.hpp"
 #include "Polygon.hpp"
 #include "PrintConfig.hpp"
@@ -438,7 +439,6 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
         auto& writer = gcodegen.writer();
         auto& config = gcodegen.config();
         auto extruder = writer.filament();
-        auto extruder_id = extruder->extruder_id();
         auto last_pos = gcodegen.last_pos();
         
         // Declare & initialize retraction lengths
@@ -475,13 +475,13 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
         wipe_speed = std::max(wipe_speed, 10.0);
 
         // Process wipe path & calculate wipe path length
-        double wipe_dist = scale_(config.wipe_distance.get_at(extruder_id));
+        double wipe_dist = scale_(config.wipe_distance.get_at(extruder->config_index()));
         Polyline wipe_path = {last_pos};
         wipe_path.append(this->path.points.begin() + 1, this->path.points.end());
         double wipe_path_length = std::min(wipe_path.length(), wipe_dist);
 
         // Calculate the maximum retraction amount during wipe
-        retraction_length_during_wipe = config.retraction_speed.get_at(extruder_id) * 
+        retraction_length_during_wipe = config.retraction_speed.get_at(extruder->config_index()) *
             unscale_(wipe_path_length) / wipe_speed;
 
         // If the maximum retraction amount during wipe is too small,
@@ -564,6 +564,16 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
         return default_value;
     }
 
+    // Orca: rebuild the stored wipe path while preserving Polyline's boundary deduplication.
+    void Wipe::update_path(const ExtrusionPaths &paths, bool reverse)
+    {
+        reset_path();
+        for (const ExtrusionPath& extrusion_path : paths)
+            path.append(extrusion_path.polyline.to_polyline());
+        if (reverse)
+            path.reverse();
+    }
+
     std::string Wipe::wipe(GCode& gcodegen,double length, bool toolchange, bool is_last)
     {
         std::string gcode;
@@ -616,14 +626,11 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
                 if (gcodegen.enable_cooling_markers() && !is_last)
                     cooling_mark = /*gcodegen.config().role_based_wipe_speed ? ";_EXTERNAL_PERIMETER" : */";_WIPE";
 
+                // Orca: set speed once because wipe_speed is constant for all segments.
                 gcode += gcodegen.writer().set_speed(_wipe_speed * 60, "", cooling_mark);
                 for (const Line& line : wipe_path.lines()) {
                     double segment_length = line.length();
                     double dE = length * (segment_length / wipe_dist);
-                    //BBS: fix this FIXME
-                    //FIXME one shall not generate the unnecessary G1 Fxxx commands, here wipe_speed is a constant inside this cycle.
-                    // Is it here for the cooling markers? Or should it be outside of the cycle?
-                    //gcode += gcodegen.writer().set_speed(wipe_speed * 60, "", gcodegen.enable_cooling_markers() ? ";_WIPE" : "");
                     gcode += gcodegen.writer().extrude_to_xy(
                         gcodegen.point_to_gcode(line.b),
                         -dE,
@@ -1021,11 +1028,21 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
         double current_z = gcodegen.writer().get_position().z();
         if (z == -1.) // in case no specific z was provided, print at current_z pos
             z = current_z;
-        if (!is_approx(z, current_z)) {
+        // Orca: wipe_tower_no_sparse_layers crash guard. With sparse layers skipped the tower is
+        // compacted far below the object, so descending to it is only safe once the nozzle is parked
+        // over the tower - which is what the is_finish_first travel above does. Otherwise the nozzle
+        // is still over the model and this descent would drive it into the print, so defer it to the
+        // re-descents below, which run after the travel to the tower.
+        const bool defer_compacted_descend = m_sparse_layers_skipped
+            && !tcr.priming && !tcr.is_finish_first && (current_z - z) > EPSILON;
+        if (!is_approx(z, current_z) && !defer_compacted_descend) {
             gcode += gcodegen.writer().retract();
             gcode += gcodegen.writer().travel_to_z(z, "Travel down to the last wipe tower layer.");
             gcode += gcodegen.writer().unretract();
         }
+        // Tower compacted below the object, so any extrusion emitted without an explicit z has to be
+        // pulled back down to it first.
+        const bool compacted_below_object = m_sparse_layers_skipped && z >= 0. && (tcr.print_z - z) > EPSILON;
 
         // Process the end filament gcode.
         bool        add_change_filament_624 = false;
@@ -1078,11 +1095,23 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
         std::string nozzle_change_gcode_trans;
         if (is_nozzle_change) {
             // move to start_pos before nozzle change
+            // Orca: travel_to() lifts to the object layer height to clear the print. That lift is
+            // needed when arriving from the model, but is a wasted full-height Z bounce when the
+            // nozzle already sits on the compacted tower, so travel at the compacted z instead.
+            const bool compact_intower_nc_travel = compacted_below_object
+                && (tcr.print_z - gcodegen.writer().get_position().z()) > EPSILON;
             std::string start_pos_str;
             start_pos_str = gcodegen.travel_to(wipe_tower_point_to_object_point(gcodegen, transform_wt_pt(tcr.nozzle_change_result.start_pos) + plate_origin_2d), erMixed,
-                "Move to nozzle change start pos");
+                "Move to nozzle change start pos", compact_intower_nc_travel ? z : DBL_MAX);
             check_add_eol(start_pos_str);
             nozzle_change_gcode_trans += start_pos_str;
+            // The nozzle-change wipe below carries no explicit z, so it would extrude at the object
+            // layer height and float above the compacted tower. Descend unless the travel stayed down.
+            if (!compact_intower_nc_travel && compacted_below_object) {
+                std::string nc_z_descend = gcodegen.writer().travel_to_z(z, "Descend to compacted wipe tower z (no sparse layers)");
+                check_add_eol(nc_z_descend);
+                nozzle_change_gcode_trans += nc_z_descend;
+            }
             nozzle_change_gcode_trans += gcodegen.unretract();
             nozzle_change_gcode_trans += transform_gcode(tcr.nozzle_change_result.gcode, tcr.nozzle_change_result.start_pos, wipe_tower_offset, wipe_tower_rotation);
             gcodegen.set_last_pos(wipe_tower_point_to_object_point(gcodegen, transform_wt_pt(tcr.nozzle_change_result.end_pos) + plate_origin_2d));
@@ -1421,6 +1450,15 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
 
         start_filament_gcode_str = start_filament_gcode_str + wipe_next_start_point_str + toolchange_unretract_str;
 
+        // Orca: the custom change_filament_gcode lifts to the object layer height and the unretract
+        // de-hops back to it, so every tower extrusion emitted after it (purge moves, and the wall
+        // when it prints after the toolchange) would float above the compacted tower. Descend first.
+        if (compacted_below_object) {
+            std::string z_descend = gcodegen.writer().travel_to_z(z, "Descend to compacted wipe tower z (no sparse layers)");
+            check_add_eol(z_descend);
+            start_filament_gcode_str += z_descend;
+        }
+
         // Insert the end filament, toolchange, and start filament gcode into the generated gcode.
         DynamicConfig config;
         config.set_key_value("filament_end_gcode", new ConfigOptionString(end_filament_gcode_str));
@@ -1908,11 +1946,9 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
                     // resulting in a wipe tower with sparse layers.
                     double wipe_tower_z  = -1;
                     bool   ignore_sparse = false;
-                    if (gcodegen.config().wipe_tower_no_sparse_layers.value) {
+                    if (m_sparse_layers_skipped) {
                         wipe_tower_z  = m_last_wipe_tower_print_z;
-                        ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 &&
-                                         m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool &&
-                                         m_layer_idx != 0);
+                        ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]) && m_layer_idx != 0;
                         if (m_tool_change_idx == 0 && !ignore_sparse)
                         wipe_tower_z = m_last_wipe_tower_print_z + m_tool_changes[m_layer_idx].front().layer_height;
                     }
@@ -1928,12 +1964,9 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
             // resulting in a wipe tower with sparse layers.
             double wipe_tower_z  = -1;
             bool   ignore_sparse = false;
-            if (gcodegen.config().wipe_tower_no_sparse_layers.value) {
-                wipe_tower_z  = m_last_wipe_tower_print_z;
-                ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 &&
-                                 m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool);
-                if (m_tool_change_idx == 0 && !ignore_sparse)
-                    wipe_tower_z = m_last_wipe_tower_print_z + m_tool_changes[m_layer_idx].front().layer_height;
+            if (m_sparse_layers_skipped) {
+                ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]);
+                wipe_tower_z  = m_compacted_tower_z[m_layer_idx];
             }
 
             if ((m_enable_timelapse_print || m_enable_wrapping_detection) && m_is_first_print) {
@@ -1946,10 +1979,8 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
                 if (!(size_t(m_tool_change_idx) < m_tool_changes[m_layer_idx].size()))
                     throw Slic3r::RuntimeError("Wipe tower generation failed, possibly due to empty first layer.");
 
-                if (!ignore_sparse) {
+                if (!ignore_sparse)
                     gcode += append_tcr(gcodegen, m_tool_changes[m_layer_idx][m_tool_change_idx++], extruder_id, wipe_tower_z);
-                    m_last_wipe_tower_print_z = wipe_tower_z;
-                }
             }
         }
 
@@ -1963,9 +1994,8 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
             return true;
 
         bool   ignore_sparse = false;
-        if (gcodegen.config().wipe_tower_no_sparse_layers.value) {
-            ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 && m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool);
-        }
+        if (m_sparse_layers_skipped)
+            ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]);
 
         if ((m_enable_timelapse_print || m_enable_wrapping_detection) && m_is_first_print) {
             return false;
@@ -2901,6 +2931,19 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     const bool skip_config_block = print.config().gcode_skip_config_block;
     const WipeTowerType wipe_tower_type = print.wipe_tower_type();
     m_calib_config.clear();
+    // Orca: Calibration overrides are reapplied after object/region settings in _extrude().
+    // Keep inward wiping from masking retraction and pressure advance artifacts.
+    switch (print.calib_mode()) {
+    case CalibMode::Calib_PA_Line:
+    case CalibMode::Calib_PA_Pattern:
+    case CalibMode::Calib_PA_Tower:
+    case CalibMode::Calib_Auto_PA_Line:
+    case CalibMode::Calib_Retraction_tower:
+        m_calib_config.set_key_value("wipe_inward", new ConfigOptionBool(false));
+        break;
+    default:
+        break;
+    }
     // resets analyzer's tracking data
     m_last_height  = 0.f;
     m_last_layer_z = 0.f;
@@ -3555,7 +3598,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
 
         auto used_filaments = print.get_slice_used_filaments(false);
         this->placeholder_parser().set("is_all_bbl_filament", std::all_of(used_filaments.begin(), used_filaments.end(), [&](auto idx) {
-            return m_config.filament_vendor.values[idx] == "Bambu Lab";
+            return m_config.filament_vendor.get_at(idx) == "Bambu Lab";
             }));
 
         //add during_print_exhaust_fan_speed
@@ -3572,7 +3615,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         this->placeholder_parser().set("outer_wall_volumetric_speed", new ConfigOptionFloat(outer_wall_volumetric_speed));
 
         auto first_layer_filaments = print.get_slice_used_filaments(true);
-        bool has_tpu_in_first_layer = std::any_of(first_layer_filaments.begin(), first_layer_filaments.end(), [&](unsigned int idx) { return m_config.filament_type.values[idx] == "TPU"; });
+        bool has_tpu_in_first_layer = std::any_of(first_layer_filaments.begin(), first_layer_filaments.end(), [&](unsigned int idx) { return m_config.filament_type.get_at(idx) == "TPU"; });
         this->placeholder_parser().set("has_tpu_in_first_layer", new ConfigOptionBool(has_tpu_in_first_layer));
 
         if (print.calib_params().mode == CalibMode::Calib_PA_Line) {
@@ -6308,8 +6351,13 @@ LayerResult GCode::process_layer(
                                 all_label_ids.insert(inst.label_object_id);
                         break;
                     }
-            std::vector<size_t> filament_instances_id(all_label_ids.begin(), all_label_ids.end());
-            m_filament_instances_code = _encode_label_ids_to_base64(filament_instances_id);
+            // Orca: A scheduled extruder may have no object instances on this layer.
+            // Clear any pending mask so it cannot be emitted for the wrong toolchange.
+            m_filament_instances_code.clear();
+            if (!all_label_ids.empty()) {
+                std::vector<size_t> filament_instances_id(all_label_ids.begin(), all_label_ids.end());
+                m_filament_instances_code = _encode_label_ids_to_base64(filament_instances_id);
+            }
         }
 
         // The inline _extrude hook may already have taken the snapshot mid-extrusion on a
@@ -6555,6 +6603,8 @@ LayerResult GCode::process_layer(
                         }
                         // Then print infill
                         gcode += this->extrude_infill(print, by_region_specific, false);
+                        // Then the walls left hanging in mid air, now that the infill can anchor them
+                        gcode += this->extrude_perimeters(print, by_region_specific, first_layer, false, true);
                         // Then print perimeters of regions that has is_infill_first == true
                         gcode += this->extrude_perimeters(print, by_region_specific, first_layer, true);
                     }
@@ -6850,6 +6900,7 @@ LayerResult GCode::process_layer(
                             has_insert_timelapse_gcode = true;
                         }
                         gcode += this->extrude_infill(print, by_region_specific, false);
+                        gcode += this->extrude_perimeters(print, by_region_specific, first_layer, false, true);
                         gcode += this->extrude_perimeters(print, by_region_specific, first_layer, true);
                         // ironing
                         gcode += this->extrude_infill(print, by_region_specific, true);
@@ -7199,7 +7250,8 @@ std::string GCode::extrude_loop(const ExtrusionLoop&        loop_ref,
                                 const std::string&          description,
                                 double                      speed,
                                 const ExtrusionEntitiesPtr& region_perimeters,
-                                const Point*                start_point)
+                                const Point*                start_point,
+                                const WipeInwardSupport*     wipe_support)
 {
     // get a copy; don't modify the orientation of the original loop object otherwise
     // next copies (if any) would not detect the correct orientation
@@ -7429,63 +7481,80 @@ std::string GCode::extrude_loop(const ExtrusionLoop&        loop_ref,
         m_processor.result().print_statistics.total_seam_scarf_distance += static_cast<float>(seam_scarf_distance_mm);
     }
 
-    // BBS
+    // Orca: share the post-extrusion nozzle position between wipe_inward and wipe_on_loops.
+    const bool is_ccw = loop.is_counter_clockwise();
+
+    std::optional<Point> wipe_on_loops_dest;
+    if (m_config.wipe_on_loops.value && paths.back().role() == erExternalPerimeter &&
+        m_layer != nullptr && m_config.wall_loops.value > 1 && paths.front().size() >= 2 &&
+        paths.back().polyline.points.size() >= 2)
+        wipe_on_loops_dest = wipe_on_loops_destination(paths, scale_(nozzle_diameter), is_ccw, is_hole);
+
+    bool wipe_inward_applied = false;
+    // Orca: store loop paths in print order because inward offsets use this orientation.
     if (m_wipe.enable && FILAMENT_CONFIG(wipe)) {
-        m_wipe.path = Polyline();
-        for (ExtrusionPath &path : paths) {
-            //BBS: Don't need to save duplicated point into wipe path
-            if (!m_wipe.path.empty() && !path.empty() &&
-                m_wipe.path.last_point() == Point(path.first_point().x(), path.first_point().y())) {
-                // Convert Points3 to Points
-                for (auto it = path.polyline.points.begin() + 1; it != path.polyline.points.end(); ++it)
-                    m_wipe.path.append(Point(it->x(), it->y()));
-            } else
-                m_wipe.path.append(path.polyline.to_polyline());  // TODO: don't limit wipe to last path
+        m_wipe.update_path(paths);
+
+        // Orca: loop wipe paths retain print direction. Their material side is
+        // therefore left for CCW contours and right for CW contours, with the
+        // result inverted for holes. Only external perimeters are eligible.
+        // Calibration overrides are applied during extrusion, after the region
+        // context was created. Check the effective setting again at execution.
+        if (m_config.wipe_inward && m_config.wipe_inward_distance.value > 0. &&
+            wipe_support != nullptr && !wipe_support->inner_lines.empty() &&
+            // A loop's role is its first path's role. An overhanging start must
+            // not hide ordinary external-wall segments elsewhere in the loop.
+            std::any_of(paths.begin(), paths.end(),
+                [](const ExtrusionPath &path) { return is_external_perimeter(path.role()); }) &&
+            m_wipe.path.points.size() >= 2) {
+            // Orca: use the actual extrusion width from the path, not the config
+            // value — outer_wall_line_width=0 (Auto) would make get_abs_value
+            // return 0 and silently disable the feature, and Arachne may produce
+            // a different width than the config default.
+            const double outer_wall_line_width = paths.front().width;
+            const double requested_offset = m_config.wipe_inward_distance.get_abs_value(outer_wall_line_width);
+            const double offset_dist = scale_(std::min(requested_offset, outer_wall_line_width));
+            if (offset_dist > SCALED_EPSILON) {
+                const Point seam_start = paths.front().first_point();
+                const Point seam_end   = paths.back().last_point();
+                const Point wipe_start = wipe_on_loops_dest.value_or(seam_end);
+                const double max_wipe_length = scale_(FILAMENT_CONFIG(wipe_distance));
+                // Orca: Wipe::wipe() replaces points[0] with last_pos and executes
+                // from points[1]. The helper preserves that sentinel and atomically
+                // replaces the remaining points, or leaves the path untouched.
+                // Orca: a configured wall count does not guarantee that Arachne
+                // generated an adjacent wall for this particular loop. Only
+                // earlier entities are considered because later walls have
+                // not been printed yet (for example with Outer/Inner order).
+                // Inner walls determine the material side; every earlier wall
+                // remains available to validate the executable wipe path.
+                const double support_distance = scale_(std::max(nozzle_diameter, outer_wall_line_width));
+                Polyline inward_path = m_wipe.path;
+                if (offset_wipe_path_toward_support(
+                        inward_path, seam_start, seam_end, wipe_start,
+                        wipe_offset_direction(is_ccw, is_hole), offset_dist, max_wipe_length,
+                        wipe_support->inner_lines, wipe_support->printed_lines,
+                        m_wipe.path.lines(), support_distance)) {
+                    m_wipe.path = std::move(inward_path);
+                    wipe_inward_applied = true;
+                }
+            }
         }
     }
 
-    // make a little move inwards before leaving loop
-    if (m_config.wipe_on_loops.value && paths.back().role() == erExternalPerimeter && m_layer != NULL && m_config.wall_loops.value > 1 && paths.front().size() >= 2 && paths.back().polyline.points.size() >= 3) {
-        // detect angle between last and first segment
-        // the side depends on the original winding order of the polygon (inwards for contours, outwards for holes)
-        //FIXME improve the algorithm in case the loop is tiny.
-        //FIXME improve the algorithm in case the loop is split into segments with a low number of points (see the Point b query).
-        const Point3 &a3 = paths.front().polyline.points[1];  // second point
-        Point a = Point(a3.x(), a3.y());
-        const Point3 &b3 = *(paths.back().polyline.points.end()-3);       // second to last point
-        Point b = Point(b3.x(), b3.y());
-        if (is_hole == loop.is_counter_clockwise()) {
-            // swap points
-            Point c = a; a = b; b = c;
-        }
-
-        double angle = paths.front().first_point().ccw_angle(a, b) / 3;
-
-        // turn inwards if contour, turn outwards if hole
-        if (is_hole == loop.is_counter_clockwise()) angle *= -1;
-
-        // create the destination point along the first segment and rotate it
-        // we make sure we don't exceed the segment length because we don't know
-        // the rotation of the second segment so we might cross the object boundary
-        Vec2d  p1 = paths.front().polyline.points.front().cast<double>().head<2>();
-        Vec2d  p2 = paths.front().polyline.points[1].cast<double>().head<2>();
-        Vec2d  v  = p2 - p1;
-        double nd = scale_(EXTRUDER_CONFIG(nozzle_diameter));
-        double l2 = v.squaredNorm();
-        // Shift by no more than a nozzle diameter.
-        //FIXME Hiding the seams will not work nicely for very densely discretized contours!
-        //BBS. shorten the travel distant before the wipe path
-        double threshold = 0.2;
-        Point  pt = (p1 + v * threshold).cast<coord_t>();
-        if (nd * nd < l2)
-            pt = (p1 + threshold * v * (nd / sqrt(l2))).cast<coord_t>();
-        //Point pt = ((nd * nd >= l2) ? (p1+v*0.4): (p1 + 0.2 * v * (nd / sqrt(l2)))).cast<coord_t>();
-        const Point3 &center3 = paths.front().polyline.points.front();
-        pt.rotate(angle, Point(center3.x(), center3.y()));
-        // generate the travel move
-        gcode += m_writer.extrude_to_xy(this->point_to_gcode(pt), 0, "move inwards before travel", true);
+    // Orca: make the configured inward move before leaving the loop.
+    if (wipe_on_loops_dest) {
+        gcode += m_writer.extrude_to_xy(
+            this->point_to_gcode(*wipe_on_loops_dest), 0, "move inwards before travel", true);
+        this->set_last_pos(*wipe_on_loops_dest);
     }
 
+    // Execute the accepted path before another extrusion replaces it. Wiping
+    // must not force retraction or Z-hop across a short travel to the next wall.
+    // Ordinary travel planning decides whether to retract from the new position.
+    if (wipe_inward_applied)
+        gcode += m_wipe.wipe(*this, 0.);
+
     return gcode;
 }
 
@@ -7519,21 +7588,9 @@ std::string GCode::extrude_multi_path(const ExtrusionMultiPath& multipath, const
         m_multi_flow_segment_path_pa_set = true;
     }
 
-    // BBS
-    if (m_wipe.enable && FILAMENT_CONFIG(wipe)) {
-        m_wipe.path = Polyline();
-        for (const ExtrusionPath &path : multipath.paths) {
-            //BBS: Don't need to save duplicated point into wipe path
-            if (!m_wipe.path.empty() && !path.empty() &&
-                m_wipe.path.last_point() == Point(path.first_point().x(), path.first_point().y())) {
-                // Convert Points3 to Points
-                for (auto it = path.polyline.points.begin() + 1; it != path.polyline.points.end(); ++it)
-                    m_wipe.path.append(Point(it->x(), it->y()));
-            } else
-                m_wipe.path.append(path.polyline.to_polyline()); // TODO: don't limit wipe to last path
-        }
-        m_wipe.path.reverse();
-    }
+    // Orca: multipath wipes retrace the extrusion in reverse order.
+    if (m_wipe.enable && FILAMENT_CONFIG(wipe))
+        m_wipe.update_path(multipath.paths, true);
 
     return gcode;
 }
@@ -7541,14 +7598,15 @@ std::string GCode::extrude_multi_path(const ExtrusionMultiPath& multipath, const
 std::string GCode::extrude_entity(const ExtrusionEntity&      entity,
                                   const std::string&          description,
                                   double                      speed,
-                                  const ExtrusionEntitiesPtr& region_perimeters)
+                                  const ExtrusionEntitiesPtr& region_perimeters,
+                                  const WipeInwardSupport*     wipe_support)
 {
     if (const ExtrusionPath* path = dynamic_cast<const ExtrusionPath*>(&entity))
         return this->extrude_path(*path, description, speed);
     else if (const ExtrusionMultiPath* multipath = dynamic_cast<const ExtrusionMultiPath*>(&entity))
         return this->extrude_multi_path(*multipath, description, speed);
     else if (const ExtrusionLoop* loop = dynamic_cast<const ExtrusionLoop*>(&entity))
-        return this->extrude_loop(*loop, description, speed, region_perimeters);
+        return this->extrude_loop(*loop, description, speed, region_perimeters, nullptr, wipe_support);
     else
         throw Slic3r::InvalidArgument("Invalid argument supplied to extrude()");
     return "";
@@ -7562,6 +7620,7 @@ std::string GCode::extrude_path(const ExtrusionPath& path, const std::string& de
     //    description += ExtrusionEntity::role_to_string(path.role());
     std::string gcode = this->_extrude(path, description, speed);
     if (m_wipe.enable && FILAMENT_CONFIG(wipe)) {
+        m_wipe.reset_path();
         m_wipe.path = path.polyline.to_polyline();
         if (is_tree(this->config().support_type) && is_support(path.role())) {
             if ((m_wipe.path.first_point() - m_wipe.path.last_point()).cast<double>().norm() > scale_(0.2)) {
@@ -7582,7 +7641,7 @@ std::string GCode::extrude_path(const ExtrusionPath& path, const std::string& de
 }
 
 // Extrude perimeters: Decide where to put seams (hide or align seams).
-std::string GCode::extrude_perimeters(const Print &print, const std::vector<ObjectByExtruder::Island::Region> &by_region, bool is_first_layer, bool is_infill_first)
+std::string GCode::extrude_perimeters(const Print &print, const std::vector<ObjectByExtruder::Island::Region> &by_region, bool is_first_layer, bool is_infill_first, bool unsupported_loops_only)
 {
     std::string gcode;
     for (const ObjectByExtruder::Island::Region &region : by_region)
@@ -7594,8 +7653,36 @@ std::string GCode::extrude_perimeters(const Print &print, const std::vector<Obje
                 : (m_config.is_infill_first == is_infill_first);
             if (!should_print) continue;
 
-            for (const ExtrusionEntity* ee : region.perimeters)
-                gcode += this->extrude_entity(*ee, "perimeter", -1., region.perimeters);
+            // Build the printed prefix once in emission order, scoped to this
+            // region. Disabled or zero-length wipes need no support geometry.
+            std::optional<WipeInwardSupport> wipe_support;
+            if (m_wipe.enable && FILAMENT_CONFIG(wipe) && m_config.wipe_inward &&
+                m_config.wipe_inward_distance.value > 0. &&
+                scale_(FILAMENT_CONFIG(wipe_distance)) > SCALED_EPSILON)
+                wipe_support.emplace();
+
+            // ORCA: loops flagged as extruded in mid air, out of reach of the layer below, are held back
+            // for a second pass after the infill that anchors them. Infill already precedes infill first walls.
+            const bool defer_unsupported = !is_infill_first;
+            auto waits_for_infill = [](const ExtrusionEntity *ee) {
+                return ee->is_loop() && static_cast<const ExtrusionLoop *>(ee)->print_after_infill;
+            };
+
+            // The deferred pass runs after the infill, so the loops the first pass emitted are
+            // already down and belong in the prefix an inward wipe may land on.
+            if (wipe_support && defer_unsupported && unsupported_loops_only)
+                for (const ExtrusionEntity* ee : region.perimeters)
+                    if (!waits_for_infill(ee))
+                        wipe_support->append(*ee);
+
+            for (const ExtrusionEntity* ee : region.perimeters) {
+                if (defer_unsupported && waits_for_infill(ee) != unsupported_loops_only)
+                    continue;
+                gcode += this->extrude_entity(*ee, "perimeter", -1., region.perimeters,
+                                             wipe_support ? &*wipe_support : nullptr);
+                if (wipe_support)
+                    wipe_support->append(*ee);
+            }
         }
     return gcode;
 }
@@ -7836,7 +7923,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
     // path is 2D. But in slope lift case, lift z is done in travel_to function.
     // Add m_need_change_layer_lift_z when change_layer in case of no lift if m_last_pos is equal to path.first_point() by chance
     Point first_point = path.first_point();
-    if (!m_last_pos_defined || m_last_pos.to_point() != first_point || m_need_change_layer_lift_z || slope_need_z_travel) {
+    if (!m_last_pos_defined || m_last_pos.to_point() != first_point || m_need_change_layer_lift_z ||
+        slope_need_z_travel) {
         const bool _last_pos_undefined = !m_last_pos_defined;
 
         double z = DBL_MAX;
@@ -9469,12 +9557,14 @@ std::string GCode::set_extruder(unsigned int new_filament_id, double print_z, bo
             if (old_filament_id_in_new_extruder == -1)
                 wipe_volume = 0;
             else {
-                wipe_volume = flush_matrix[old_filament_id_in_new_extruder * number_of_extruders + new_filament_id];
+                size_t flush_idx = size_t(old_filament_id_in_new_extruder) * number_of_extruders + new_filament_id;
+                wipe_volume = flush_idx < flush_matrix.size() ? flush_matrix[flush_idx] : 0.f;
                 wipe_volume *= m_config.flush_multiplier.get_at(new_extruder_id);
             }
         }
         else {
-            wipe_volume = flush_matrix[old_filament_id * number_of_extruders + new_filament_id];
+            size_t flush_idx = size_t(old_filament_id) * number_of_extruders + new_filament_id;
+            wipe_volume = flush_idx < flush_matrix.size() ? flush_matrix[flush_idx] : 0.f;
             wipe_volume *= m_config.flush_multiplier.get_at(new_extruder_id);  // if is multi_extruder only use the fist extruder matrix
         }
         wipe_volume = std::max(0.f, wipe_volume-grab_purge_volume);
diff --git a/src/libslic3r/GCode.hpp b/src/libslic3r/GCode.hpp
index 990bf0fee7..8cf4aa03fb 100644
--- a/src/libslic3r/GCode.hpp
+++ b/src/libslic3r/GCode.hpp
@@ -39,6 +39,7 @@ namespace Slic3r {
 
 // Forward declarations.
 class GCode;
+struct WipeInwardSupport;
 
 namespace CustomGCode{ struct Item; }
 struct PrintInstance;
@@ -61,7 +62,7 @@ public:
     bool enable;
     Polyline path;
 
-    // Orca:
+    // Orca: retraction portions emitted before, during, and after the wipe move.
     struct RetractionValues{
         double retraction_length_before_wipe = 0.;
         double retraction_length_during_wipe = 0.;
@@ -73,8 +74,10 @@ public:
     void reset_path() { this->path = Polyline(); }
     std::string wipe(GCode &gcodegen, double length, bool toolchange = false, bool is_last = false);
 
-    // Orca:
+    // Orca: calculate the retraction portions that can be emitted at wipe speed.
     RetractionValues calculateWipeRetractionLengths(GCode& gcodegen, bool toolchange);
+    // Orca: rebuild the stored path while deduplicating shared path boundaries.
+    void update_path(const ExtrusionPaths &paths, bool reverse = false);
 };
 
 class WipeTowerIntegration {
@@ -103,8 +106,13 @@ public:
         m_enable_wrapping_detection(print_config.enable_wrapping_detection && (print_config.wrapping_exclude_area.values.size() > 2) && (slice_used_filaments.size() <= 1)),
         m_is_first_print(true),
         m_print_config(&print_config),
-        m_last_wipe_tower_print_z(print_config.z_offset.value)
+        m_last_wipe_tower_print_z(print_config.z_offset.value),
+        m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(print_config))
     {
+        // Precomputed rather than accumulated while emitting, so that the clearance validator and
+        // the emitter cannot disagree about where the compacted tower sits on any given layer.
+        if (m_sparse_layers_skipped)
+            m_compacted_tower_z = compute_compacted_wipe_tower_z(tool_changes, float(print_config.z_offset.value));
         // initialize with the extruder offset of master extruder id
         m_extruder_offsets.resize(print_config.filament_map.size(), print_config.extruder_offset.get_at(print_config.master_extruder_id.value - 1));
         const auto& filament_map = print_config.filament_map.values; // 1 based idx
@@ -164,6 +172,11 @@ private:
     float                                                        m_wipe_tower_depth;
     BoundingBoxf                                                 m_wipe_tower_bbx;
     Vec2f                                                        m_rib_offset{Vec2f(0, 0)};
+    // wipe_tower_no_sparse_layers, as answered by the shared compaction rule rather than by the raw
+    // option: smooth timelapse and wrapping detection keep a tower on every layer regardless.
+    const bool                                                   m_sparse_layers_skipped;
+    // Print z of the compacted tower per planned layer. Empty when the tower is not compacted.
+    std::vector<float>                                           m_compacted_tower_z;
 };
 
 class ColorPrintColors
@@ -430,14 +443,16 @@ private:
     std::string extrude_entity(const ExtrusionEntity&      entity,
                                const std::string&          description       = "",
                                double                      speed             = -1.,
-                               const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr());
+                               const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr(),
+                               const WipeInwardSupport*     wipe_support      = nullptr);
     // Orca: pass the complete collection of region perimeters to the extrude loop to check whether the wipe before external loop
     // should be executed
     std::string extrude_loop(const ExtrusionLoop&        loop,
                              const std::string&          description,
                              double                      speed             = -1.,
                              const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr(),
-                             const Point*                start_point       = nullptr);
+                             const Point*                start_point       = nullptr,
+                             const WipeInwardSupport*     wipe_support      = nullptr);
     std::string extrude_multi_path(const ExtrusionMultiPath& multipath, const std::string& description = "", double speed = -1.);
     std::string extrude_path(const ExtrusionPath& path, const std::string& description = "", double speed = -1.);
 
@@ -519,7 +534,7 @@ private:
 		// For sequential print, the instance of the object to be printing has to be defined.
 		const size_t                     				 single_object_instance_idx);
 
-    std::string     extrude_perimeters(const Print& print, const std::vector<ObjectByExtruder::Island::Region>& by_region, bool is_first_layer, bool is_infill_first);
+    std::string     extrude_perimeters(const Print& print, const std::vector<ObjectByExtruder::Island::Region>& by_region, bool is_first_layer, bool is_infill_first, bool unsupported_loops_only = false);
     std::string     extrude_infill(const Print& print, const std::vector<ObjectByExtruder::Island::Region>& by_region, bool ironing);
     std::string     extrude_support(const ExtrusionEntityCollection& support_fills, const ExtrusionRole support_extrusion_role);
 
diff --git a/src/libslic3r/GCode/FanMover.hpp b/src/libslic3r/GCode/FanMover.hpp
index 3f803fbd23..17addd855c 100644
--- a/src/libslic3r/GCode/FanMover.hpp
+++ b/src/libslic3r/GCode/FanMover.hpp
@@ -32,7 +32,8 @@ class FanMover
 private:
     const std::regex regex_fan_speed;
     const float nb_seconds_delay;
-    const bool with_D_option;
+    // Set from fan_speedup_time at the call site, but nothing here reads it.
+    [[maybe_unused]] const bool with_D_option;
     const bool relative_e;
     const bool only_overhangs;
     const float kickstart;
diff --git a/src/libslic3r/GCode/GCodeProcessor.cpp b/src/libslic3r/GCode/GCodeProcessor.cpp
index cd6c494f33..6fc7717386 100644
--- a/src/libslic3r/GCode/GCodeProcessor.cpp
+++ b/src/libslic3r/GCode/GCodeProcessor.cpp
@@ -1468,9 +1468,11 @@ void GCodeProcessor::run_post_process()
 
     // Append a per-filament usage block at a filament change.
     auto handle_filament_change = [&](int filament_id, int cur_line_id, int nozzle_id) {
-        // skip filament changes emitted inside the machine start / end gcode
-        if (m_machine_start_gcode_end_line_id == (unsigned int) (-1) && (unsigned int) (cur_line_id) < m_machine_start_gcode_end_line_id ||
-            m_machine_end_gcode_start_line_id != (unsigned int) (-1) && (unsigned int) (cur_line_id) > m_machine_end_gcode_start_line_id)
+        // Skip filament changes emitted inside the machine start / end gcode. One forward pass assigns
+        // the tag ids and tests them in the same loop, so inside the start gcode the end tag is unseen
+        // and the id still holds the sentinel. That is why the first clause tests == and the second !=.
+        if ((m_machine_start_gcode_end_line_id == (unsigned int) (-1) && (unsigned int) (cur_line_id) < m_machine_start_gcode_end_line_id) ||
+            (m_machine_end_gcode_start_line_id != (unsigned int) (-1) && (unsigned int) (cur_line_id) > m_machine_end_gcode_start_line_id))
             return;
         if (!m_filament_blocks.empty())
             m_filament_blocks.back().upper_gcode_id = cur_line_id;
@@ -2777,7 +2779,7 @@ bool GCodeProcessor::check_multi_extruder_gcode_valid(const int
     std::map<int, std::map<int, GCodePosInfo>> gcode_path_pos; // object_id, filament_id, pos
     for (const GCodeProcessorResult::MoveVertex &move : m_result.moves) {
         // sometimes, the start line extrude was outside the edge of plate a little, this is allowed, so do not include into the gcode_path_pos
-        if (move.type == EMoveType::Extrude /* && move.extrusion_role != ExtrusionRole::erFlush || move.type == EMoveType::Travel*/)
+        if (move.type == EMoveType::Extrude /* && move.extrusion_role != ExtrusionRole::erFlush || move.type == EMoveType::Travel*/) {
             if (move.extrusion_role == ExtrusionRole::erCustom) {
                 /*if (move.is_arc_move_with_interpolation_points()) {
                     for (int i = 0; i < move.interpolation_points.size(); i++) {
@@ -2799,6 +2801,7 @@ bool GCodeProcessor::check_multi_extruder_gcode_valid(const int
                 gcode_path_pos[move.object_label_id][int(move.extruder_id)].max_print_z = std::max(gcode_path_pos[move.object_label_id][int(move.extruder_id)].max_print_z,
                                                                                                    move.print_z);
             }
+        }
     }
 
     bool valid = true;
@@ -7593,8 +7596,8 @@ void GCodeProcessor::update_slice_warnings()
         if (used_filaments[idx] < m_result.required_nozzle_HRC.size())
             filament_hrc = m_result.required_nozzle_HRC[used_filaments[idx]];
 
-        int filament_extruder_id = m_filament_maps[used_filaments[idx]];
-        int extruder_hrc = nozzle_hrc_lists[filament_extruder_id];
+        int filament_extruder_id = used_filaments[idx] < m_filament_maps.size() ? m_filament_maps[used_filaments[idx]] : -1;
+        int extruder_hrc = (filament_extruder_id >= 0 && (size_t) filament_extruder_id < nozzle_hrc_lists.size()) ? nozzle_hrc_lists[filament_extruder_id] : 0;
 
         BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": Check HRC: filament:%1%, hrc=%2%, extruder:%3%, hrc:%4%") % used_filaments[idx] % filament_hrc % filament_extruder_id % extruder_hrc;
 
diff --git a/src/libslic3r/GCode/ToolOrderUtils.cpp b/src/libslic3r/GCode/ToolOrderUtils.cpp
index 4e2934d967..4a67477d24 100644
--- a/src/libslic3r/GCode/ToolOrderUtils.cpp
+++ b/src/libslic3r/GCode/ToolOrderUtils.cpp
@@ -910,7 +910,7 @@ namespace Slic3r
 
         unsigned int iterations = (1 << all_extruders.size());
         unsigned int final_state = iterations - 1;
-        std::vector<std::vector<float>>cache(iterations, std::vector<float>(all_extruders.size(), 0x7fffffff));
+        std::vector<std::vector<float>>cache(iterations, std::vector<float>(all_extruders.size(), std::numeric_limits<float>::max()));
         std::vector<std::vector<int>>prev(iterations, std::vector<int>(all_extruders.size(), -1));
         cache[1][0] = 0.;
         for (unsigned int state = 0; state < iterations; ++state) {
diff --git a/src/libslic3r/GCode/ToolOrdering.cpp b/src/libslic3r/GCode/ToolOrdering.cpp
index 0a97e7ac41..7ea46cf8a7 100644
--- a/src/libslic3r/GCode/ToolOrdering.cpp
+++ b/src/libslic3r/GCode/ToolOrdering.cpp
@@ -10,6 +10,7 @@
 #include "FilamentMixer.hpp"
 #include "LocalesUtils.hpp"
 #include "Utils.hpp"
+#include "format.hpp"
 #include "I18N.hpp"
 
 #include <boost/log/trivial.hpp>
@@ -82,8 +83,9 @@ bool check_filament_printable_after_group(const std::vector<unsigned int> &used_
         int printable_status = print_config->filament_printable.get_at(filament_id);
         int extruder_idx = filament_maps[filament_id];
         if (!(printable_status >> extruder_idx & 1)) {
-            std::string extruder_name = extruder_idx == 0 ? _L("left") : _L("right");
-            std::string error_msg     = _L("Grouping error: ") + filament_type + _L(" can not be placed in the ") + extruder_name + _L(" nozzle");
+            std::string error_msg = extruder_idx == 0 ?
+                                        Slic3r::format(_L("Grouping error: %1% cannot be placed in the left nozzle"), filament_type) :
+                                        Slic3r::format(_L("Grouping error: %1% cannot be placed in the right nozzle"), filament_type);
             throw Slic3r::RuntimeError(error_msg);
         }
     }
@@ -1488,10 +1490,10 @@ static FilamentGroupContext build_filament_group_context(
 
     auto machine_filament_info = build_machine_filaments(print->get_extruder_filament_info(), extruder_ams_counts, ignore_ext_filament);
 
-    std::vector<std::string>   filament_types      = print_config.filament_type.values;
-    std::vector<std::string>   filament_colours    = print_config.filament_colour.values;
-    std::vector<unsigned char> filament_is_support = print_config.filament_is_support.values;
-    std::vector<std::string>   filament_ids        = print_config.filament_ids.values;
+    // The grouping code walks filament_ids and indexes filament_info by the same position.
+    std::vector<std::string> filament_ids = print_config.filament_ids.values;
+    if (filament_ids.size() > filament_nums)
+        filament_ids.resize(filament_nums);
 
     FGMode fg_mode = mode == FilamentMapMode::fmmAutoForMatch ? FGMode::MatchMode : FGMode::FlushMode;
     context.model_info.flush_matrix          = std::move(nozzle_flush_mtx);
@@ -1500,11 +1502,14 @@ static FilamentGroupContext build_filament_group_context(
     context.model_info.filament_ids          = filament_ids;
     context.model_info.unprintable_volumes   = unprintable_volumes;
 
-    for (size_t idx = 0; idx < filament_types.size(); ++idx) {
+    // Consumers index filament_info by filament id, so it must span the filament count: a partial
+    // or legacy config can leave any of these arrays short, and get_at clamps.
+    context.model_info.filament_info.reserve(filament_nums);
+    for (size_t idx = 0; idx < filament_nums; ++idx) {
         FilamentGroupUtils::FilamentInfo info;
-        info.color      = filament_colours[idx];
-        info.type       = filament_types[idx];
-        info.is_support = filament_is_support[idx];
+        info.color      = print_config.filament_colour.get_at(idx);
+        info.type       = print_config.filament_type.get_at(idx);
+        info.is_support = print_config.filament_is_support.get_at(idx);
         context.model_info.filament_info.emplace_back(std::move(info));
     }
 
@@ -2732,6 +2737,28 @@ void ToolOrdering::enforce_mixed_component_order()
     }
 }
 
+// Declared in ToolOrdering.hpp (exposed for unit testing).
+std::vector<unsigned int> parse_cyclic_order(const std::string& str, unsigned int number_of_extruders)
+{
+    std::vector<unsigned int> order;
+    for (const std::string& token : split_string(str, ',')) {
+        try {
+            size_t pos      = 0;
+            int    filament = std::stoi(token, &pos); // stoi skips leading whitespace by itself
+            // stoi stops at the first non-digit, so "2x" would parse as 2. Require the whole token to be
+            // consumed (bar trailing whitespace) to drop it like any other garbage.
+            if (token.find_first_not_of(" \t\r\n", pos) != std::string::npos)
+                continue;
+            if (filament >= 1 && (unsigned int)filament <= number_of_extruders
+                && std::find(order.begin(), order.end(), (unsigned int)(filament - 1)) == order.end())
+                order.emplace_back((unsigned int)(filament - 1));
+        } catch (const std::exception&) {
+            // Not a number, ignore it.
+        }
+    }
+    return order;
+}
+
 void ToolOrdering::reorder_extruders_for_minimum_flush_volume(bool reorder_first_layer)
 {
     const PrintConfig* print_config = m_print_config_ptr;
@@ -2829,11 +2856,41 @@ void ToolOrdering::reorder_extruders_for_minimum_flush_volume(bool reorder_first
     const bool use_cyclic_ordering =
         (print_config->toolchange_ordering == ToolChangeOrderingType::Cyclic);
 
+    // By default the first layer keeps its adhesion-optimized order (and any custom first layer
+    // sequence); the cyclic sequence is only forced onto it when the user opts in.
+    const bool cyclic_first_layer = use_cyclic_ordering && print_config->toolchange_cyclic_first_layer.value;
+
+    // Optional user defined cyclic sequence, given as 1-based filament numbers ("3,2,1,4"). Filaments
+    // missing from it keep their ascending order after the listed ones, so a partial or bogus entry
+    // still yields the default cyclic order.
+    const std::vector<unsigned int> cyclic_order =
+        use_cyclic_ordering ? parse_cyclic_order(print_config->toolchange_cyclic_order.value, number_of_extruders)
+                            : std::vector<unsigned int>();
+
+    // Reorder a layer's filaments (0-based) for cyclic ordering: ascending by default, or following the
+    // user defined sequence when one was given. Filaments absent from the sequence keep ascending order
+    // after the listed ones.
+    auto apply_cyclic_order = [&cyclic_order](std::vector<unsigned int>& filaments) {
+        std::sort(filaments.begin(), filaments.end());
+        if (!cyclic_order.empty())
+            std::stable_sort(filaments.begin(), filaments.end(), [&cyclic_order](unsigned int lhs, unsigned int rhs) {
+                auto rank = [&cyclic_order](unsigned int filament) {
+                    return size_t(std::find(cyclic_order.begin(), cyclic_order.end(), filament) - cyclic_order.begin());
+                };
+                return rank(lhs) < rank(rhs);
+            });
+    };
+
     // other_layers_seq: the layer_idx and extruder_idx are base on 1
-    auto get_custom_seq = [&other_layers_seqs, &reorder_first_layer, &first_layer_filaments, &layer_filaments, use_cyclic_ordering](int layer_idx, std::vector<int>& out_seq) -> bool {
+    auto get_custom_seq = [&other_layers_seqs, &reorder_first_layer, &first_layer_filaments, &layer_filaments, use_cyclic_ordering, cyclic_first_layer, &apply_cyclic_order](int layer_idx, std::vector<int>& out_seq) -> bool {
         if (!reorder_first_layer && layer_idx == 0) {
-            out_seq.resize(first_layer_filaments.size());
-            std::transform(first_layer_filaments.begin(), first_layer_filaments.end(), out_seq.begin(), [](auto item) {return item + 1; });
+            // The first layer tool order is already decided (adhesion-optimized, plus any custom first
+            // layer sequence). Only override it with the cyclic sequence when the user opted in.
+            std::vector<unsigned int> ordered = first_layer_filaments;
+            if (cyclic_first_layer)
+                apply_cyclic_order(ordered);
+            out_seq.resize(ordered.size());
+            std::transform(ordered.begin(), ordered.end(), out_seq.begin(), [](auto item) {return int(item) + 1; });
             return true;
         }
         for (size_t idx = other_layers_seqs.size() - 1; idx != size_t(-1); --idx) {
@@ -2844,9 +2901,12 @@ void ToolOrdering::reorder_extruders_for_minimum_flush_volume(bool reorder_first
             }
         }
 
-        if (use_cyclic_ordering && layer_idx >= 0 && size_t(layer_idx) < layer_filaments.size()) {
+        // Skip the first layer here (layer_idx == 0 only reaches this point on the reorder_first_layer
+        // path) unless the user asked for cyclic order on it, so it keeps the default flush ordering.
+        if (use_cyclic_ordering && layer_idx >= 0 && (layer_idx != 0 || cyclic_first_layer)
+            && size_t(layer_idx) < layer_filaments.size()) {
             std::vector<unsigned int> ordered = layer_filaments[size_t(layer_idx)];
-            std::sort(ordered.begin(), ordered.end());
+            apply_cyclic_order(ordered);
             out_seq.resize(ordered.size());
             std::transform(ordered.begin(), ordered.end(), out_seq.begin(), [](auto item) { return int(item) + 1; });
             return true;
@@ -3137,7 +3197,7 @@ void ToolOrdering::assign_custom_gcodes(const Print &print)
 		// Skip all custom G-codes above this layer and skip all extruder switches.
 		for (; custom_gcode_it != custom_gcode_per_print_z.gcodes.rend() && (
             (print_z_above > lt.print_z && custom_gcode_it->print_z > 0.5 * (lt.print_z + print_z_above))
-            || custom_gcode_it->type == CustomGCode::ToolChange); ++ custom_gcode_it);
+            || custom_gcode_it->type == CustomGCode::ToolChange); ++ custom_gcode_it) {}
         print_z_above = lt.print_z;
 		if (custom_gcode_it == custom_gcode_per_print_z.gcodes.rend())
 			// Custom G-codes were processed.
diff --git a/src/libslic3r/GCode/ToolOrdering.hpp b/src/libslic3r/GCode/ToolOrdering.hpp
index 4dc08c0e8b..1b8ce190d7 100644
--- a/src/libslic3r/GCode/ToolOrdering.hpp
+++ b/src/libslic3r/GCode/ToolOrdering.hpp
@@ -417,6 +417,11 @@ private:
     int                        most_used_extruder;
 };
 
+// Parse the user defined cyclic toolchange sequence ("3,2 , 1 , 4") into 0-based filament indices.
+// Out-of-range entries, duplicates and non-numeric tokens are dropped, so a partially valid string
+// still orders the filaments it does name. Exposed for unit testing.
+std::vector<unsigned int> parse_cyclic_order(const std::string& str, unsigned int number_of_extruders);
+
 } // namespace SLic3r
 
 #endif /* slic3r_ToolOrdering_hpp_ */
diff --git a/src/libslic3r/GCode/WipePathHelpers.cpp b/src/libslic3r/GCode/WipePathHelpers.cpp
new file mode 100644
index 0000000000..d785a16a8c
--- /dev/null
+++ b/src/libslic3r/GCode/WipePathHelpers.cpp
@@ -0,0 +1,920 @@
+#include "WipePathHelpers.hpp"
+
+#include "../AABBTreeLines.hpp"
+
+#include <algorithm>
+#include <cassert>
+#include <cmath>
+#include <limits>
+#include <tuple>
+
+namespace Slic3r {
+
+void WipeInwardSupport::append(const ExtrusionEntity &entity)
+{
+    const ExtrusionPaths *paths = nullptr;
+    if (const auto *loop = dynamic_cast<const ExtrusionLoop *>(&entity))
+        paths = &loop->paths;
+    else if (const auto *multipath = dynamic_cast<const ExtrusionMultiPath *>(&entity))
+        paths = &multipath->paths;
+
+    // A loop's role is its first path's role. An overhanging start must not
+    // hide the ordinary inner-wall segments elsewhere in the same loop.
+    const bool is_inner = paths ? std::any_of(paths->begin(), paths->end(),
+        [](const ExtrusionPath &path) { return is_internal_perimeter(path.role()); }) :
+        is_internal_perimeter(entity.role());
+    const Lines lines = entity.as_polyline().lines();
+    printed_lines.insert(printed_lines.end(), lines.begin(), lines.end());
+    if (is_inner)
+        inner_lines.insert(inner_lines.end(), lines.begin(), lines.end());
+}
+
+// Orca: miter limit ratio. Matches DefaultMiterLimit from ClipperUtils.hpp.
+// When the miter join extends more than miter_limit * offset_dist from the
+// original vertex, the miter is replaced by a bevel join.
+static constexpr double miter_limit = 3.0;
+
+// Orca: threshold for detecting near-reversal (backtracking spike).
+// Normalized dot product below this means the segments point in nearly
+// opposite directions (angle > ~172°). Offsetting such a path is unsafe.
+static constexpr double reversal_dot_threshold = -0.99;
+
+// Orca: candidates pointing more than 60 degrees away from the selected inner
+// wall are too tangent to distinguish the material side reliably at a cusp.
+static constexpr double min_support_alignment = 0.5;
+
+// Keep a scaled-coordinate rounding floor while allowing the tolerance to
+// follow the relevant offset or path length. Clearance allows a larger fraction.
+static double wipe_tolerance(double distance, double relative_tolerance = 0.1)
+{
+    return std::max(4. * SCALED_EPSILON, relative_tolerance * distance);
+}
+
+Point sample_path_at_distance(const ExtrusionPaths &paths, bool forward, double target)
+{
+    assert(!paths.empty());
+    if (paths.empty())
+        return Point(0, 0);
+
+    double remaining = target;
+    Point result = forward ? paths.front().first_point() : paths.back().last_point();
+    for (int pi = forward ? 0 : (int)paths.size() - 1;
+         pi >= 0 && pi < (int)paths.size() && remaining > 0.;
+         pi += forward ? 1 : -1) {
+        const Points3 &pts = paths[pi].polyline.points;
+        for (int i = forward ? 0 : (int)pts.size() - 1;
+             remaining > 0. && (forward ? i + 1 < (int)pts.size() : i > 0);
+             i += forward ? 1 : -1) {
+            const int j = forward ? i + 1 : i - 1;
+            const Point cur(pts[i].x(), pts[i].y());
+            const Point next(pts[j].x(), pts[j].y());
+            const double segment_length = (next - cur).cast<double>().norm();
+            if (segment_length < SCALED_EPSILON)
+                continue;
+            if (remaining <= segment_length) {
+                const double ratio = remaining / segment_length;
+                return Point(coord_t(cur.x() + ratio * (next.x() - cur.x())),
+                             coord_t(cur.y() + ratio * (next.y() - cur.y())));
+            }
+            remaining -= segment_length;
+            result = next;
+        }
+    }
+    return result;
+}
+
+// Orca: consecutive duplicates carry no path length and can be removed safely.
+// A reversal, however, is real travelled distance: removing its vertex would
+// replace a long backtracking wipe with a short, unrelated shortcut.
+static bool prepare_source(Points &pts)
+{
+    pts.erase(std::unique(pts.begin(), pts.end()), pts.end());
+
+    if (pts.size() < 2)
+        return false;
+
+    for (size_t i = 1; i + 1 < pts.size(); ++i) {
+        const Vec2d v_prev = (pts[i] - pts[i - 1]).cast<double>();
+        const Vec2d v_next = (pts[i + 1] - pts[i]).cast<double>();
+        const double dot = v_prev.dot(v_next) / (v_prev.norm() * v_next.norm());
+        if (dot < reversal_dot_threshold)
+            return false;
+    }
+    return true;
+}
+
+static bool build_offset_polyline(const Points &original, int dir, double offset_dist,
+                                  Points &result, size_t &first_join_index)
+{
+    if (original.size() < 2)
+        return false;
+
+    // Orca: collapse all consecutive duplicates first, then reject any
+    // backtracking in the cleaned path instead of replacing travelled distance
+    // with a shortcut.
+    Points source = original;
+    if (! prepare_source(source))
+        return false;
+
+    const size_t n = source.size();
+
+    // Orca: compute the perpendicular offset for segment i->i+1 as an infinite Line.
+    auto offset_segment = [dir, offset_dist](const Point &a, const Point &b) -> Line {
+        Vec2d  v = (b - a).cast<double>();
+        double len = v.norm();
+        Vec2d  perp(0, 0);
+        if (len > SCALED_EPSILON)
+            perp = Vec2d(-v.y(), v.x()) * (dir * offset_dist / len);
+        return Line(Point(coord_t(a.x() + perp.x()), coord_t(a.y() + perp.y())),
+                    Point(coord_t(b.x() + perp.x()), coord_t(b.y() + perp.y())));
+    };
+
+    result.clear();
+    result.reserve(n);
+    first_join_index = 0;
+
+    // Orca: the first point is perpendicular to the first segment.
+    Line l_prev = offset_segment(source[0], source[1]);
+    result.push_back(l_prev.a);
+
+    // Orca: use the analytic intersection of adjacent offset segments for a
+    // miter join. Intersecting the already rounded Line endpoints amplifies
+    // coordinate quantization when the source segments are nearly parallel.
+    for (size_t i = 1; i + 1 < n; ++i) {
+        Line l_next = offset_segment(source[i], source[i + 1]);
+        const Vec2d previous = (source[i] - source[i - 1]).cast<double>().normalized();
+        const Vec2d next = (source[i + 1] - source[i]).cast<double>().normalized();
+        const double denominator = 1. + previous.dot(next);
+
+        bool need_bevel = denominator <= EPSILON;
+        Point pt;
+        if (! need_bevel) {
+            const Vec2d previous_normal(-previous.y(), previous.x());
+            const Vec2d next_normal(-next.y(), next.x());
+            const Vec2d miter = (previous_normal + next_normal) * (dir * offset_dist / denominator);
+            if (miter.norm() > miter_limit * offset_dist) {
+                need_bevel = true;
+            } else {
+                pt = Point(coord_t(source[i].x() + miter.x()),
+                           coord_t(source[i].y() + miter.y()));
+            }
+        }
+
+        if (need_bevel) {
+            result.push_back(l_prev.b);
+            if (l_next.a != result.back())
+                result.push_back(l_next.a);
+        } else {
+            result.push_back(pt);
+        }
+        if (i == 1)
+            first_join_index = result.size() - 1;
+        l_prev = l_next;
+    }
+
+    // Orca: the last point is perpendicular to the last segment.
+    result.push_back(l_prev.b);
+
+    return true;
+}
+
+int wipe_offset_direction(bool is_ccw, bool is_hole)
+{
+    const int loop_inside = is_ccw ? +1 : -1;
+    return is_hole ? -loop_inside : loop_inside;
+}
+
+static bool starts_by_backtracking(const Polyline &path, Point actual_start)
+{
+    if (path.points.size() < 3)
+        return false;
+    // Orca: points[0] is only a storage sentinel; use the nozzle position for
+    // the executable connector, particularly after a wipe_on_loops pre-move.
+    const Vec2d connector = (path.points[1] - actual_start).cast<double>();
+    const Vec2d outgoing = (path.points[2] - path.points[1]).cast<double>();
+    // An inward connector may be perpendicular to the outgoing offset edge.
+    // Rounded joins must not turn that right angle into a false backtrack.
+    return connector.dot(outgoing) < -4. * SCALED_EPSILON * outgoing.norm();
+}
+
+// Orca: sample the outgoing perimeter without copying or clipping its full loop.
+static Point sample_polyline_at_distance(const Polyline &polyline, double target)
+{
+    assert(! polyline.points.empty());
+    Point result = polyline.first_point();
+    for (size_t i = 1; i < polyline.points.size() && target > 0.; ++i) {
+        const Vec2d segment = (polyline.points[i] - result).cast<double>();
+        const double length = segment.norm();
+        if (length <= SCALED_EPSILON)
+            continue;
+        if (target <= length)
+            return (result.cast<double>() + segment * (target / length)).cast<coord_t>();
+        target -= length;
+        result = polyline.points[i];
+    }
+    return result;
+}
+
+// Orca: convert an executable path into Wipe::wipe()'s stored representation.
+// The first point is a dummy replaced by the actual nozzle position, while the
+// remaining points are clipped to the configured wipe distance.
+static bool store_wipe_path(Polyline &destination, Point seam_start,
+                            Polyline actual_path, double max_wipe_length)
+{
+    if (actual_path.points.size() < 2 || max_wipe_length <= SCALED_EPSILON)
+        return false;
+
+    const double actual_length = actual_path.length();
+    if (actual_length <= SCALED_EPSILON)
+        return false;
+    if (actual_length - max_wipe_length > SCALED_EPSILON)
+        actual_path.clip_end(actual_length - max_wipe_length);
+    if (actual_path.points.size() < 2)
+        return false;
+    for (size_t i = 1; i < actual_path.points.size(); ++i)
+        if (actual_path.points[i - 1] == actual_path.points[i])
+            return false;
+
+    Polyline stored_path;
+    stored_path.points.reserve(actual_path.points.size());
+    stored_path.points.push_back(seam_start);
+    stored_path.points.insert(stored_path.points.end(), actual_path.points.begin() + 1, actual_path.points.end());
+    stored_path.reset_to_linear_move();
+    destination = std::move(stored_path);
+    return true;
+}
+
+bool offset_wipe_path(Polyline &polyline, Point seam_start, Point seam_end, Point wipe_start,
+                      int dir, double offset_dist, double max_wipe_length)
+{
+    assert(dir == +1 || dir == -1);
+    assert(offset_dist > 0);
+    if (polyline.points.empty() || polyline.first_point() != seam_start ||
+        max_wipe_length <= SCALED_EPSILON)
+        return false;
+
+    const Polyline original = polyline;
+    const double original_length = original.length();
+    if (original_length <= SCALED_EPSILON)
+        return false;
+
+    double source_length = std::min(original_length, max_wipe_length);
+    for (;;) {
+        Polyline source = original;
+        const double clip_distance = original_length - source_length;
+        if (clip_distance > SCALED_EPSILON)
+            source.clip_end(clip_distance);
+
+        Points wrapped_source;
+        wrapped_source.reserve(source.points.size() + 1);
+        if (seam_start == seam_end) {
+            // Orca: the stored loop is open at seam_start even when the seam gap is
+            // zero. Prepend the closing edge so build_offset_polyline() creates
+            // the proper join between that edge and the first outgoing edge,
+            // instead of leaving the first offset point on the closing wall.
+            size_t closing_index = original.points.size();
+            while (closing_index > 0 && original.points[closing_index - 1] == seam_start)
+                --closing_index;
+            if (closing_index == 0)
+                return false; // Orca: the entire path is a single point.
+            wrapped_source.push_back(original.points[closing_index - 1]);
+        } else {
+            // Orca: use the unextruded seam-gap edge to determine the incoming
+            // direction at the seam. Its offset is construction geometry only;
+            // wiping along it would create a Z-shaped detour before the outgoing
+            // perimeter offset.
+            wrapped_source.push_back(seam_end);
+        }
+        wrapped_source.insert(wrapped_source.end(), source.points.begin(), source.points.end());
+
+        Points offset_points;
+        size_t first_join_index = 0;
+        if (! build_offset_polyline(wrapped_source, dir, offset_dist, offset_points, first_join_index) ||
+            first_join_index == 0 || first_join_index >= offset_points.size())
+            return false;
+        // Orca: discard the offset of the prepended edge and, for a bevel, its
+        // incoming endpoint. The executable wipe starts at the seam join and
+        // then follows only the already printed outgoing perimeter.
+        offset_points.erase(offset_points.begin(), offset_points.begin() + first_join_index);
+
+        Polyline actual_path;
+        actual_path.points.reserve(offset_points.size() + 1);
+        actual_path.points.push_back(wipe_start);
+        actual_path.points.insert(actual_path.points.end(), offset_points.begin(), offset_points.end());
+
+        // A loop pre-move may advance past an otherwise valid offset join.
+        // Enter at the nozzle's projection instead of returning to the join.
+        // Do not repair a join that already backtracks across the seam gap;
+        // the caller must still validate wall crossings, material side and support.
+        if (seam_start != seam_end && wipe_start != seam_start && wipe_start != seam_end &&
+            starts_by_backtracking(actual_path, wipe_start) && ! starts_by_backtracking(actual_path, seam_end)) {
+            size_t entry = 1;
+            while (entry + 1 < actual_path.points.size()) {
+                const Vec2d edge = (actual_path.points[entry + 1] - actual_path.points[entry]).cast<double>();
+                const double projection = (wipe_start - actual_path.points[entry]).cast<double>().dot(edge);
+                if (projection <= 0.)
+                    break;
+                if (projection < edge.squaredNorm()) {
+                    actual_path.points[entry] = (actual_path.points[entry].cast<double>() +
+                        edge * (projection / edge.squaredNorm())).cast<coord_t>();
+                    break;
+                }
+                ++entry;
+            }
+            actual_path.points.erase(actual_path.points.begin() + 1, actual_path.points.begin() + entry);
+        }
+
+        if (seam_start != seam_end && wipe_start == seam_end &&
+            starts_by_backtracking(actual_path, wipe_start)) {
+            // Orca: a wide seam gap or a sharp cusp may put the first miter
+            // behind its outgoing edge. Reject this offset candidate so the
+            // caller can try the opposite side or the translated fallback.
+            return false;
+        }
+
+        const double actual_length = actual_path.length();
+        const bool source_exhausted = original_length - source_length <= SCALED_EPSILON;
+        if (actual_length + SCALED_EPSILON < max_wipe_length && ! source_exhausted) {
+            // Orca: offset joins may shorten the path at every corner. Grow the
+            // source until the executable offset path, not a heuristic source
+            // margin, reaches the configured wipe distance.
+            const double deficit = max_wipe_length - actual_length;
+            const double next_length = std::min(original_length,
+                source_length + std::max(deficit, 2. * SCALED_EPSILON));
+            if (next_length - source_length <= SCALED_EPSILON)
+                return false;
+            source_length = next_length;
+            continue;
+        }
+
+        // Orca: unlike an extruded offset, a wipe may safely cross or retrace the
+        // just-printed perimeter. The caller validates the complete executable
+        // path against current and earlier printed perimeter geometry.
+        return store_wipe_path(polyline, seam_start, std::move(actual_path), max_wipe_length);
+    }
+}
+
+static bool translated_wipe_path(Polyline &polyline, Point seam_start, Point seam_end, Point wipe_start,
+                                 const Vec2d &translation, double max_wipe_length)
+{
+    if (translation.norm() <= SCALED_EPSILON || max_wipe_length <= SCALED_EPSILON)
+        return false;
+
+    const Polyline original = polyline;
+    Polyline actual_path;
+    actual_path.points.reserve(original.points.size() + 2);
+    actual_path.points.push_back(wipe_start);
+
+    const auto append_translated = [&actual_path, &translation](const Point &point) {
+        const Point translated = (point.cast<double>() + translation).cast<coord_t>();
+        if (translated != actual_path.points.back())
+            actual_path.points.push_back(translated);
+    };
+
+    // Orca: translate the seam join directly. Translating seam_end and then
+    // following the unextruded gap back to seam_start makes the wipe double
+    // back whenever a gap ends near a sharp corner.
+    append_translated(seam_start);
+    for (const Point &point : original.points)
+        append_translated(point);
+
+    if (seam_start != seam_end && wipe_start == seam_end &&
+        starts_by_backtracking(actual_path, wipe_start)) {
+        // Orca: at a wide gap next to a cusp, the translated seam join may
+        // lie behind the outgoing edge. Prefer a shorter local inward move
+        // at the actual extrusion end over a longer lightning-shaped wipe.
+        actual_path.points.resize(1);
+        append_translated(seam_end);
+    }
+
+    return store_wipe_path(polyline, seam_start, std::move(actual_path), max_wipe_length);
+}
+
+// A segment whose endpoints lie within one line's distance capsule is fully
+// supported, since that capsule is convex. Subdivide only when support changes
+// between lines; fixed-distance sampling can miss an unsupported gap.
+static bool segment_is_supported(Point start, Point end,
+                                  const AABBTreeLines::LinesDistancer<Line> &distancer,
+                                  double max_distance)
+{
+    const Point midpoint = ((start.cast<double>() + end.cast<double>()) * 0.5).cast<coord_t>();
+    const auto [distance, line_index, nearest] = distancer.distance_from_lines_extra<false>(midpoint);
+    if (distance > max_distance)
+        return false;
+
+    const Line &line = distancer.get_line(line_index);
+    if (line.distance_to(start) <= max_distance && line.distance_to(end) <= max_distance)
+        return true;
+    if (distancer.distance_from_lines<false>(start) > max_distance ||
+        distancer.distance_from_lines<false>(end) > max_distance)
+        return false;
+
+    // Conservatively reject an unresolved transition at coordinate precision.
+    if ((end - start).cast<double>().norm() <= SCALED_EPSILON)
+        return false;
+    return segment_is_supported(start, midpoint, distancer, max_distance) &&
+           segment_is_supported(midpoint, end, distancer, max_distance);
+}
+
+std::optional<double> wipe_path_support_score(
+    const Polyline &polyline, Point wipe_start,
+    const AABBTreeLines::LinesDistancer<Line> &target_distancer,
+    const AABBTreeLines::LinesDistancer<Line> &all_support_distancer,
+    double max_distance)
+{
+    if (polyline.points.size() < 2 || target_distancer.get_lines().empty() || max_distance <= 0)
+        return std::nullopt;
+
+    // Orca: require a local neighbour, not merely an earlier perimeter elsewhere in
+    // the region. At a convex corner, an inner wall's miter is farther from the
+    // external seam than its normal wall spacing, so allow the same bounded miter
+    // reach as the offset construction without accepting a remote island.
+    if (target_distancer.distance_from_lines<false>(wipe_start) >
+        miter_limit * max_distance + 4. * SCALED_EPSILON)
+        return std::nullopt;
+
+    Point previous = wipe_start;
+    for (size_t i = 1; i < polyline.points.size(); ++i) {
+        // Orca: a tightly curved inward path may cross back over the current wall.
+        // This is safe for a non-extruding wipe as long as the complete path
+        // remains over current or earlier printed perimeter geometry.
+        // Allow the same coordinate-rounding tolerance at every point, including
+        // the actual start substituted for the stored sentinel.
+        if (! segment_is_supported(previous, polyline.points[i], all_support_distancer,
+                                   max_distance + 4. * SCALED_EPSILON))
+            return std::nullopt;
+        previous = polyline.points[i];
+    }
+
+    // Orca: decide direction at the seam. Scoring the complete path may select
+    // the wrong initial side when two contours converge and the later prefix
+    // happens to run closer to unrelated support.
+    return target_distancer.distance_from_lines<false>(polyline.points[1]);
+}
+
+static bool initial_connector_is_clear(
+    const Polyline &polyline, Point wipe_start, Point seam_start,
+    AABBTreeLines::LinesDistancer<Line> &current_perimeter_distancer,
+    double contact_tolerance)
+{
+    if (polyline.points.size() < 2 || polyline.points[1] == wipe_start)
+        return false;
+
+    // Orca: without a seam gap, the connector necessarily starts at the wall
+    // and a self-touching cusp may share that same endpoint on several edges.
+    if (seam_start == wipe_start)
+        return true;
+
+    const Line connector(wipe_start, polyline.points[1]);
+    const auto intersections = current_perimeter_distancer.intersections_with_line<false>(connector);
+    for (const auto &intersection : intersections) {
+        if ((intersection.first - wipe_start).cast<double>().norm() > contact_tolerance)
+            return false;
+    }
+
+    Point closest;
+    // Orca: integer offset joins may miss the exact seam-start coordinate by
+    // a few microns. Treat a close pass through that point as retracing the
+    // external wall, but keep the unavoidable contact at the actual start.
+    if (connector.distance_to_squared(seam_start, &closest) <= contact_tolerance * contact_tolerance &&
+        (closest - wipe_start).cast<double>().norm() > contact_tolerance)
+        return false;
+
+    return true;
+}
+
+static std::optional<Vec2d> support_offset_at_start(
+    const Polyline &source, Point local_origin, bool disambiguate_branch,
+    AABBTreeLines::LinesDistancer<Line> &support_distancer,
+    double max_support_distance)
+{
+    if (source.points.size() < 2)
+        return std::nullopt;
+
+    // Orca: a nonzero gap may put the seam beside the wrong branch of a cusp.
+    // Sample farther along the path to identify its actual neighbouring wall.
+    const Point support_query = disambiguate_branch ?
+        sample_polyline_at_distance(source, 2. * max_support_distance) : source.first_point();
+    const auto nearest_result = support_distancer.distance_from_lines_extra<false>(support_query);
+    const Line &nearest_line = support_distancer.get_line(std::get<1>(nearest_result));
+    Vec2d sampled_offset = std::get<2>(nearest_result) - support_query.cast<double>();
+
+    if (disambiguate_branch) {
+        // Orca: an endpoint projection also contains distance along the support
+        // segment. Remove that tangent component before comparing wall sides.
+        const Vec2d support_edge = (nearest_line.b - nearest_line.a).cast<double>();
+        if (support_edge.norm() > SCALED_EPSILON) {
+            const Vec2d support_tangent = support_edge.normalized();
+            sampled_offset -= support_tangent * sampled_offset.dot(support_tangent);
+        }
+    }
+    if (sampled_offset.norm() <= SCALED_EPSILON)
+        return std::nullopt;
+
+    if (! disambiguate_branch)
+        return sampled_offset;
+
+    // Orca: find the local point on the same material-side branch. Using the
+    // sampled point itself would add the distance already travelled along the
+    // perimeter and turn a normal transition into a long diagonal move.
+    const Vec2d sampled_direction = sampled_offset.normalized();
+    Vec2d local_offset = sampled_offset;
+    double best_local_score = std::numeric_limits<double>::infinity();
+    for (size_t line_index : support_distancer.all_lines_in_radius(
+             local_origin, 2. * max_support_distance + 4. * SCALED_EPSILON)) {
+        Point local_support;
+        const Line &line = support_distancer.get_line(line_index);
+        const double distance_squared = line.distance_to_squared(local_origin, &local_support);
+        const Vec2d candidate_offset = local_support.cast<double>() - local_origin.cast<double>();
+        const double candidate_distance = std::sqrt(distance_squared);
+        if (candidate_distance <= SCALED_EPSILON)
+            continue;
+        const double alignment = candidate_offset.normalized().dot(sampled_direction);
+        if (alignment < min_support_alignment)
+            continue;
+        const double score = candidate_distance / alignment;
+        if (score < best_local_score) {
+            best_local_score = score;
+            local_offset = candidate_offset;
+        }
+    }
+    return local_offset;
+}
+
+static double executable_path_length(const Polyline &stored_path, Point wipe_start)
+{
+    if (stored_path.points.size() < 2)
+        return 0.;
+
+    // Orca: points[0] is the storage sentinel, so measure the first segment
+    // from the actual nozzle position and the remaining stored segments normally.
+    double length = (stored_path.points[1] - wipe_start).cast<double>().norm();
+    for (size_t index = 2; index < stored_path.points.size(); ++index)
+        length += (stored_path.points[index] - stored_path.points[index - 1]).cast<double>().norm();
+    return length;
+}
+
+static Lines material_side_support_lines(const Polyline &path, Point seam, int preferred_dir,
+                                         const Lines &support_lines)
+{
+    if (path.points.size() < 4 || path.first_point() != path.last_point())
+        return {};
+
+    // Orca: the bisector of the incoming and outgoing material-side normals is
+    // a local side test that remains valid for globally self-touching Arachne
+    // contours. Ignore repeated seam points when obtaining both tangents.
+    const auto outgoing_it = std::find_if(
+        path.points.begin() + 1, path.points.end(), [seam](const Point &point) { return point != seam; });
+    const auto incoming_it = std::find_if(
+        path.points.rbegin() + 1, path.points.rend(), [seam](const Point &point) { return point != seam; });
+    if (outgoing_it == path.points.end() || incoming_it == path.points.rend())
+        return {};
+
+    const Vec2d outgoing = (*outgoing_it - seam).cast<double>().normalized();
+    const Vec2d incoming = (seam - *incoming_it).cast<double>().normalized();
+    const Vec2d material_direction =
+        (Vec2d(-outgoing.y(), outgoing.x()) + Vec2d(-incoming.y(), incoming.x())) * preferred_dir;
+    if (material_direction.norm() <= EPSILON)
+        return {};
+
+    Lines result;
+    result.reserve(support_lines.size());
+    for (const Line &line : support_lines) {
+        Point closest;
+        line.distance_to_squared(seam, &closest);
+        if ((closest - seam).cast<double>().dot(material_direction) > SCALED_EPSILON)
+            result.push_back(line);
+    }
+    return result;
+}
+
+bool wipe_path_stays_on_material_side(
+    const Polyline &path, Point path_start, const Vec2d &support_direction,
+    const AABBTreeLines::LinesDistancer<Line> &target_perimeter_distancer,
+    const AABBTreeLines::LinesDistancer<Line> &current_perimeter_distancer,
+    double effective_offset, bool require_clearance)
+{
+    if (path.points.size() < 2 || support_direction.norm() <= EPSILON ||
+        target_perimeter_distancer.get_lines().empty() || current_perimeter_distancer.get_lines().empty() ||
+        effective_offset <= SCALED_EPSILON)
+        return false;
+
+    const Vec2d initial_offset = (path.points[1] - path_start).cast<double>();
+    if (initial_offset.norm() <= SCALED_EPSILON ||
+        initial_offset.normalized().dot(support_direction.normalized()) < min_support_alignment)
+        return false;
+    // Orca: after the connector has left the extrusion endpoint, an inward
+    // offset must retain most of its requested clearance from the current
+    // external wall. Otherwise a tight turn may send an initially correct path
+    // back onto that wall, or make the opposite-side candidate look supported.
+    const double clearance_tolerance = wipe_tolerance(effective_offset, 0.25);
+    const double minimum_clearance = effective_offset - clearance_tolerance;
+    const Lines &lines = current_perimeter_distancer.get_lines();
+    const auto left_normal = [](const Line &line) -> Vec2d {
+        const Vec2d edge = (line.b - line.a).cast<double>();
+        if (edge.norm() <= SCALED_EPSILON)
+            return Vec2d::Zero();
+        return Vec2d(-edge.y(), edge.x()).normalized();
+    };
+    const auto on_material_side = [&](const Point &point, bool check_clearance) {
+        const auto [distance, line_index, nearest] =
+            current_perimeter_distancer.distance_from_lines_extra<false>(point);
+        if (line_index >= lines.size())
+            return false;
+        const Line &line = lines[line_index];
+        Vec2d normal = left_normal(line);
+        // At a shared vertex use both incident edges, so the result does not
+        // depend on which equally close edge the AABB query happens to return.
+        const Line &previous = lines[(line_index + lines.size() - 1) % lines.size()];
+        const Line &next = lines[(line_index + 1) % lines.size()];
+        if ((nearest - line.a.cast<double>()).norm() <= SCALED_EPSILON && previous.b == line.a)
+            normal += left_normal(previous);
+        if ((nearest - line.b.cast<double>()).norm() <= SCALED_EPSILON && next.a == line.b)
+            normal += left_normal(next);
+        if (normal.norm() <= EPSILON)
+            return false;
+
+        // An open or self-touching wall has no reliable polygon-wide sign.
+        // Orient its local normal toward the neighbouring printed inner wall,
+        // then test the candidate on that side at every sample.
+        normal.normalize();
+        const Point wall_point = nearest.cast<coord_t>();
+        const Vec2d support_point = std::get<2>(
+            target_perimeter_distancer.distance_from_lines_extra<false>(wall_point));
+        const double support_side = (support_point - nearest).dot(normal);
+        if (std::abs(support_side) <= 4. * SCALED_EPSILON)
+            return false;
+        const double side = (point.cast<double>() - nearest).dot(normal) * (support_side > 0. ? 1. : -1.);
+        return side >= -4. * SCALED_EPSILON &&
+            (! check_clearance || distance + 4. * SCALED_EPSILON >= minimum_clearance);
+    };
+
+    Point previous = path.points[1];
+    if (! on_material_side(previous, require_clearance))
+        return false;
+    for (size_t index = 2; index < path.points.size(); ++index) {
+        const Vec2d segment = (path.points[index] - previous).cast<double>();
+        const size_t samples = std::max<size_t>(1, size_t(std::ceil(segment.norm() / effective_offset)));
+        for (size_t sample = 1; sample <= samples; ++sample) {
+            const Point point = (previous.cast<double>() +
+                segment * (double(sample) / double(samples))).cast<coord_t>();
+            if (! on_material_side(point, require_clearance))
+                return false;
+        }
+        previous = path.points[index];
+    }
+    return true;
+}
+
+bool offset_wipe_path_toward_support(Polyline &polyline, Point seam_start, Point seam_end, Point wipe_start,
+                                     int preferred_dir, double offset_dist, double max_wipe_length,
+                                     const Lines &target_perimeter_lines, const Lines &printed_perimeter_lines,
+                                     const Lines &current_perimeter_lines,
+                                     double max_support_distance)
+{
+    assert(preferred_dir == +1 || preferred_dir == -1);
+    if (polyline.points.size() < 2 || target_perimeter_lines.empty() || current_perimeter_lines.empty() ||
+        offset_dist <= SCALED_EPSILON ||
+        max_wipe_length <= SCALED_EPSILON || max_support_distance <= SCALED_EPSILON)
+        return false;
+
+    Lines material_support_lines;
+    const Lines *candidate_support_lines = &target_perimeter_lines;
+    if (seam_start == seam_end) {
+        // Orca: another contour may have a geometrically closer inner wall on
+        // this loop's air side. Restrict zero-gap support using the local seam
+        // normals before choosing the nearest wall.
+        material_support_lines = material_side_support_lines(
+            polyline, seam_start, preferred_dir, target_perimeter_lines);
+        if (material_support_lines.empty())
+            return false;
+        candidate_support_lines = &material_support_lines;
+    }
+
+    AABBTreeLines::LinesDistancer<Line> support_distancer(*candidate_support_lines);
+    const std::optional<Vec2d> support_offset = support_offset_at_start(
+        polyline, seam_end, seam_start != seam_end,
+        support_distancer, max_support_distance);
+    if (! support_offset)
+        return false;
+    const Vec2d toward_support = *support_offset;
+    const double local_support_distance = toward_support.norm();
+    const double effective_offset = std::min(offset_dist, local_support_distance);
+    if (effective_offset <= SCALED_EPSILON)
+        return false;
+    const Vec2d support_direction = toward_support / local_support_distance;
+
+    // Orca: every candidate is validated against the same generated geometry.
+    // Build these AABB trees once per loop instead of rebuilding them for each
+    // preferred, alternate, translated, direct, or reversed candidate.
+    Lines all_support_lines = printed_perimeter_lines;
+    all_support_lines.insert(all_support_lines.end(), current_perimeter_lines.begin(), current_perimeter_lines.end());
+    AABBTreeLines::LinesDistancer<Line> all_support_distancer(std::move(all_support_lines));
+    AABBTreeLines::LinesDistancer<Line> current_perimeter_distancer(current_perimeter_lines);
+
+    // Orca: allow only the contact needed to leave the extrusion endpoint. A
+    // connector that meets the current wall again is a seam-gap retrace, even
+    // if the rest of the non-extruding wipe remains over printed material.
+    const double contact_tolerance = wipe_tolerance(effective_offset);
+
+    struct Candidate {
+        Polyline path;
+        // Orca: support score chooses the material-side path; length is used
+        // only to replace a corner-truncated path with the reverse fallback.
+        double support_score;
+        double path_length;
+    };
+
+    // Direction and wall contact have different origins after a loop pre-move.
+    // Keep the construction's wall endpoint for intersection checks even when
+    // the candidate's direction must be checked from the current nozzle position.
+    const auto validate_candidate = [&](Polyline path, Point path_start, Point direction_start,
+                                        double path_contact_tolerance,
+                                        const Vec2d &candidate_support_direction,
+                                        double candidate_offset,
+                                        bool require_clearance = true) -> std::optional<Candidate> {
+        // Orca: backtracking indicates a wrong join only across a nonzero gap.
+        // A closed zero-gap offset may initially turn back at its miter while
+        // still remaining on the supported material side of the perimeter.
+        const bool backtracks_across_gap = seam_start != seam_end && starts_by_backtracking(path, wipe_start);
+        // At a clipped corner another branch of the current wall may be closer
+        // than the requested offset. Preserve the zero-gap clearance rule, but
+        // check direction and local material side independently for every gap.
+        const bool material_side = wipe_path_stays_on_material_side(
+            path, direction_start, candidate_support_direction,
+            support_distancer, current_perimeter_distancer, candidate_offset,
+            require_clearance && seam_start == seam_end);
+        const bool connector_clear = initial_connector_is_clear(
+            path, wipe_start, path_start, current_perimeter_distancer, path_contact_tolerance);
+        if (backtracks_across_gap || ! material_side || ! connector_clear)
+            return std::nullopt;
+        const std::optional<double> score = wipe_path_support_score(
+            path, wipe_start, support_distancer, all_support_distancer, max_support_distance);
+        if (! score)
+            return std::nullopt;
+        const double path_length = executable_path_length(path, wipe_start);
+        return Candidate{std::move(path), *score, path_length};
+    };
+
+    const auto offset_candidate = [&](int dir) -> std::optional<Candidate> {
+        Polyline path = polyline;
+        if (! offset_wipe_path(path, seam_start, seam_end, wipe_start, dir,
+                               effective_offset, max_wipe_length))
+            return std::nullopt;
+        return validate_candidate(std::move(path), seam_start, seam_start,
+                                  contact_tolerance, support_direction, effective_offset);
+    };
+
+    std::optional<Candidate> preferred = offset_candidate(preferred_dir);
+    std::optional<Candidate> alternate = offset_candidate(-preferred_dir);
+
+    // Orca: forward and reverse fallbacks share the same clamping, translation,
+    // connector tolerance, and complete-path validation.
+    const auto translated_candidate = [&](Polyline source, Point source_start, Point source_end,
+                                          const Vec2d &candidate_support_offset) -> std::optional<Candidate> {
+        const double support_distance = candidate_support_offset.norm();
+        const double candidate_offset = std::min(offset_dist, support_distance);
+        if (candidate_offset <= SCALED_EPSILON)
+            return std::nullopt;
+
+        const Vec2d candidate_translation = candidate_support_offset * (candidate_offset / support_distance);
+        if (! translated_wipe_path(source, source_start, source_end, wipe_start,
+                                   candidate_translation, max_wipe_length))
+            return std::nullopt;
+        const double candidate_tolerance = wipe_tolerance(candidate_offset);
+        return validate_candidate(std::move(source), source_start, source_start, candidate_tolerance,
+                                  candidate_support_offset / support_distance, candidate_offset);
+    };
+
+    std::optional<Candidate> translated = translated_candidate(polyline, seam_start, seam_end, toward_support);
+
+    // Orca: if every full-length construction folds back onto the external
+    // wall, retain a short direct inward move instead of accepting an outward
+    // candidate or falling back to the standard wipe along the outer wall.
+    const auto direct_candidate = [&](Point origin, const Vec2d &candidate_support_offset) -> std::optional<Candidate> {
+        const double support_distance = candidate_support_offset.norm();
+        const double candidate_offset = std::min(offset_dist, support_distance);
+        if (candidate_offset <= SCALED_EPSILON)
+            return std::nullopt;
+        const Vec2d direction = candidate_support_offset / support_distance;
+        const Point destination = (origin.cast<double>() + direction * candidate_offset).cast<coord_t>();
+        if (destination == wipe_start)
+            return std::nullopt;
+
+        Polyline path;
+        if (! store_wipe_path(path, seam_start, Polyline{wipe_start, destination}, max_wipe_length))
+            return std::nullopt;
+        const double candidate_tolerance = wipe_tolerance(candidate_offset);
+        // Check the executed direction from the nozzle after any loop pre-move,
+        // but retain the wall origin for the connector's intersection checks.
+        return validate_candidate(std::move(path), origin, wipe_start,
+                                  candidate_tolerance, direction, candidate_offset, false);
+    };
+    std::optional<Candidate> direct = direct_candidate(seam_end, toward_support);
+
+    const double length_margin = wipe_tolerance(max_wipe_length);
+    std::optional<Candidate> reversed;
+    if (seam_start != seam_end && polyline.last_point() == seam_end) {
+        // Orca: when a large gap straddles a sharp corner, connecting the
+        // extrusion end to the forward offset may either reverse or leave only
+        // a short local move. The already printed incoming wall is equally safe:
+        // follow it backwards and determine its own material-side support.
+        Polyline reversed_source = polyline;
+        reversed_source.reverse();
+        const std::optional<Vec2d> reversed_support_offset = support_offset_at_start(
+            reversed_source, seam_end, true, support_distancer, max_support_distance);
+        if (reversed_support_offset) {
+            reversed = translated_candidate(reversed_source, seam_end, seam_end, *reversed_support_offset);
+            // A translated reverse path can backtrack or leave the material on
+            // a curved wall. Offset the incoming wall itself when translation
+            // cannot supply a complete wipe, retaining all candidate checks.
+            if (! reversed || reversed->path_length + length_margin < max_wipe_length) {
+                const double reverse_offset = std::min(offset_dist, reversed_support_offset->norm());
+                if (reverse_offset > SCALED_EPSILON &&
+                    offset_wipe_path(reversed_source, seam_end, seam_start, wipe_start,
+                                     -preferred_dir, reverse_offset, max_wipe_length)) {
+                    reversed_source.points.front() = seam_start;
+                    auto candidate = validate_candidate(std::move(reversed_source), seam_end, seam_end,
+                        wipe_tolerance(reverse_offset), reversed_support_offset->normalized(), reverse_offset);
+                    if (candidate && (! reversed ||
+                        (candidate->path_length > reversed->path_length + length_margin &&
+                         candidate->support_score <= reversed->support_score + wipe_tolerance(reverse_offset))))
+                        reversed = std::move(candidate);
+                }
+            }
+        }
+    }
+
+    // Orca: conventional offsets at a narrow cusp may form a bevel across the
+    // cusp. Candidates pointing away from the actual inner wall are rejected
+    // during validation; among the remaining paths, prefer the one whose first
+    // point is materially closer to that wall.
+    const double direction_change_margin = wipe_tolerance(effective_offset);
+    std::optional<Candidate> selected = std::move(preferred);
+    if (translated) {
+        if (! selected || translated->support_score + direction_change_margin < selected->support_score)
+            selected = std::move(translated);
+    }
+    if (! selected)
+        selected = std::move(direct);
+    // Prefer a direct inward move when the normal offset cannot be used.
+    // An alternate offset is eligible only after the same material-side checks.
+    if (! selected)
+        selected = std::move(alternate);
+
+    // Orca: prefer a complete reverse wipe over a forward fallback that had to
+    // stop at the corner. Equal-length paths keep the normal forward behavior.
+    if (reversed && (! selected ||
+        (reversed->path_length > selected->path_length + length_margin &&
+         reversed->support_score <= selected->support_score + direction_change_margin)))
+        selected = std::move(reversed);
+    if (! selected)
+        return false;
+
+    polyline = std::move(selected->path);
+    return true;
+}
+
+std::optional<Point> wipe_on_loops_destination(const ExtrusionPaths &paths, double nozzle_diam_scaled,
+                                                 bool is_ccw, bool is_hole)
+{
+    assert(!paths.empty());
+    assert(nozzle_diam_scaled > 0);
+    if (paths.empty() || nozzle_diam_scaled <= 0)
+        return std::nullopt;
+
+    // Orca: clamp sample distance to L/4 so forward/backward samples cannot meet.
+    double total_length = 0.;
+    for (const ExtrusionPath &path : paths)
+        total_length += path.length();
+    const double sample_distance = std::min(nozzle_diam_scaled, total_length * 0.25);
+
+    Point a = sample_path_at_distance(paths, true,  sample_distance);
+    Point b = sample_path_at_distance(paths, false, sample_distance);
+
+    const Point seam_start = paths.front().first_point();
+
+    // Orca: skip the inward move for degenerate geometry.
+    if (a == b || a == seam_start || b == seam_start)
+        return std::nullopt;
+
+    const bool reverse_turn = is_hole == is_ccw;
+    if (reverse_turn)
+        std::swap(a, b);
+
+    double angle = seam_start.ccw_angle(a, b) / 3;
+
+    // Orca: reject degenerate angles near 0 or 2π.
+    static constexpr double angle_epsilon = 0.01;
+    if (angle < angle_epsilon || angle > 2 * PI / 3 - angle_epsilon)
+        return std::nullopt;
+
+    if (reverse_turn)
+        angle *= -1;
+
+    Point pt = sample_path_at_distance(paths, true, std::min(0.2 * nozzle_diam_scaled, sample_distance));
+    pt.rotate(angle, seam_start);
+    return pt;
+}
+
+} // namespace Slic3r
diff --git a/src/libslic3r/GCode/WipePathHelpers.hpp b/src/libslic3r/GCode/WipePathHelpers.hpp
new file mode 100644
index 0000000000..616e5dc88b
--- /dev/null
+++ b/src/libslic3r/GCode/WipePathHelpers.hpp
@@ -0,0 +1,96 @@
+#pragma once
+
+#include <optional>
+
+#include "../ExtrusionEntity.hpp"
+#include "../Polyline.hpp"
+#include "../Line.hpp"
+
+namespace Slic3r {
+
+// Printed prefix of one region's perimeter sequence. Append each entity only
+// after extrusion; later walls and other regions cannot support an inward wipe.
+struct WipeInwardSupport {
+    Lines printed_lines;
+    Lines inner_lines;
+    void append(const ExtrusionEntity &entity);
+};
+
+namespace AABBTreeLines {
+template <typename LineType> class LinesDistancer;
+}
+
+// Orca: sample a point at a given distance along ExtrusionPaths, walking
+// across segment boundaries. forward=true walks from paths.front, false from
+// paths.back. For tiny loops the walk stops early and returns the last
+// reachable point. Returns the start point if target is zero.
+// Precondition: paths must be non-empty.
+Point sample_path_at_distance(const ExtrusionPaths &paths, bool forward, double target);
+
+// Orca: return the side of the printed path on which the material lies.
+// dir +1 is left and -1 is right, matching the offset-builder convention.
+int wipe_offset_direction(bool is_ccw, bool is_hole);
+
+// Orca: atomically offset a stored wipe path. The seam-gap or closing edge
+// determines the join with the first outgoing perimeter edge, but its offset
+// is not part of the executable wipe. Only the prefix needed by Wipe::wipe()
+// is offset. Returns false and leaves polyline unchanged if that path cannot
+// be constructed without degenerate segments. This only constructs a candidate;
+// offset_wipe_path_toward_support() validates its support, material side and
+// connector before accepting it. The first stored point
+// remains a dummy preserving Wipe::wipe()'s convention of skipping points[0].
+// Precondition: polyline starts at seam_start, dir is +1 or -1, and
+// offset_dist > 0. A non-positive max_wipe_length returns false.
+bool offset_wipe_path(Polyline &polyline, Point seam_start, Point seam_end, Point wipe_start,
+                      int dir, double offset_dist, double max_wipe_length);
+
+// Orca: score a candidate's first destination by distance to the target inner
+// walls. Return nullopt if no target wall is near wipe_start or any executable
+// segment lacks support. target_distancer contains eligible earlier walls;
+// all_support_distancer includes the current wall and all earlier walls.
+// The stored first point is a dummy: the first segment starts at wipe_start.
+// This checks support only; material-side and connector checks belong to
+// offset_wipe_path_toward_support(). Trees are reused across its candidates.
+std::optional<double> wipe_path_support_score(
+    const Polyline &polyline, Point wipe_start,
+    const AABBTreeLines::LinesDistancer<Line> &target_distancer,
+    const AABBTreeLines::LinesDistancer<Line> &all_support_distancer,
+    double max_distance);
+
+// Validate the initial inward direction and the local material side along the
+// executable path, using the inner wall to orient the open current wall's
+// normals. Clearance is optional for clipped corners and short direct fallbacks;
+// the material-side check is mandatory. The straight connector is checked by
+// its initial direction and separately by support and intersection validation.
+// path_start is the construction origin; points[0] is only a storage sentinel.
+bool wipe_path_stays_on_material_side(
+    const Polyline &path, Point path_start, const Vec2d &support_direction,
+    const AABBTreeLines::LinesDistancer<Line> &target_perimeter_distancer,
+    const AABBTreeLines::LinesDistancer<Line> &current_perimeter_distancer,
+    double effective_offset, bool require_clearance);
+
+// Orca: identify the adjacent inner perimeter from the outgoing wall, excluding
+// support on the air side of a closed zero-gap loop. Clamp the requested offset
+// to the distance from the seam end to that support, then select the safest
+// supported offset or translated path. If a wide seam gap at a corner truncates
+// every forward candidate, the incoming printed wall may be followed backwards
+// instead. All earlier printed perimeters still participate in the complete-path
+// safety check. This handles converging, locally ambiguous, or self-touching
+// contours whose global winding alone does not identify the material side.
+// Returns false and leaves polyline unchanged when no candidate is supported.
+// Precondition: preferred_dir is +1 or -1. Distances must be positive.
+bool offset_wipe_path_toward_support(Polyline &polyline, Point seam_start, Point seam_end, Point wipe_start,
+                                     int preferred_dir, double offset_dist, double max_wipe_length,
+                                     const Lines &target_perimeter_lines, const Lines &printed_perimeter_lines,
+                                     const Lines &current_perimeter_lines,
+                                     double max_support_distance);
+
+// Orca: compute the inward destination point for wipe_on_loops, or
+// std::nullopt when the geometry is degenerate (tiny loop, coincident samples,
+// angle near 0 or 2π). Returns the rotated destination or nullopt to skip the
+// inward move entirely.
+// Precondition: paths non-empty, nozzle_diam_scaled > 0.
+std::optional<Point> wipe_on_loops_destination(const ExtrusionPaths &paths, double nozzle_diam_scaled,
+                                                 bool is_ccw, bool is_hole);
+
+} // namespace Slic3r
diff --git a/src/libslic3r/GCode/WipeTower.cpp b/src/libslic3r/GCode/WipeTower.cpp
index 8aff5f4a3f..eaf8a2eaf3 100644
--- a/src/libslic3r/GCode/WipeTower.cpp
+++ b/src/libslic3r/GCode/WipeTower.cpp
@@ -25,6 +25,30 @@ static constexpr int    arc_fit_size = 20;
 enum class LimitFlow { None, LimitPrintFlow, LimitRammingFlow, LimitRammingFlowNC};//nc:nozzle change
 static const std::map<float, float> nozzle_diameter_to_nozzle_change_width{{0.2f, 0.5f}, {0.4f, 1.0f}, {0.6f, 1.2f}, {0.8f, 1.4f}};
 
+bool wipe_tower_sparse_layers_skipped(const PrintConfig &config)
+{
+    return config.wipe_tower_no_sparse_layers.value && config.timelapse_type.value != TimelapseType::tlSmooth &&
+           ! config.enable_wrapping_detection.value;
+}
+
+bool wipe_tower_layer_is_sparse(const std::vector<WipeTower::ToolChangeResult> &layer_tool_changes)
+{
+    return layer_tool_changes.size() == 1 && layer_tool_changes.front().initial_tool == layer_tool_changes.front().new_tool;
+}
+
+std::vector<float> compute_compacted_wipe_tower_z(const std::vector<std::vector<WipeTower::ToolChangeResult>> &tool_changes,
+                                                  float base_z)
+{
+    std::vector<float> tower_z(tool_changes.size(), base_z);
+    float              last = base_z;
+    for (size_t i = 0; i < tool_changes.size(); ++i) {
+        if (! tool_changes[i].empty() && ! wipe_tower_layer_is_sparse(tool_changes[i]))
+            last += tool_changes[i].front().layer_height;
+        tower_z[i] = last;
+    }
+    return tower_z;
+}
+
 inline float align_round(float value, float base)
 {
     return std::round(value / base) * base;
@@ -1349,7 +1373,7 @@ public:
             // flavor it reaches understands, not the zero dwell the other flavors flush with.
             buffer += "M400\n";
         buffer += "M104";
-        if (target_extruder != -1)
+        if (target_extruder != -1 && target_extruder < int(m_physical_extruder_map.size()))
             buffer += (" T" + std::to_string(m_physical_extruder_map[target_extruder]));
         buffer += " S" + std::to_string(target_temp) + " N0"; // N0 means the gcode is generated by slicer
         if (!comment.empty()) buffer += " ;" + comment;
@@ -1361,7 +1385,7 @@ public:
     WipeTowerWriter &format_line_M109(int target_temp, int target_extruder, const std::string &comment = std::string())
     {
         std::string buffer = "M109";
-        if (target_extruder != -1)
+        if (target_extruder != -1 && target_extruder < int(m_physical_extruder_map.size()))
             buffer += (" T" + std::to_string(m_physical_extruder_map[target_extruder]));
         buffer += " S" + std::to_string(target_temp) + " N0"; // N0 means the gcode is generated by slicer
         if (!comment.empty()) buffer += " ;" + comment;
@@ -1630,6 +1654,94 @@ float WipeTower::get_auto_brim_by_height(float max_height) {
     return 8.f;
 }
 
+float WipeTower::estimate_brim_real_width(float brim_width, float nozzle_diameter, float first_layer_height, bool type2)
+{
+    if (brim_width <= 0.f)
+        return brim_width;
+    const float spacing = nozzle_diameter * 1.25f - first_layer_height * float(1. - M_PI_4); // Width_To_Nozzle_Ratio
+    if (spacing <= EPSILON)
+        return brim_width;
+    const int loops_num = int((brim_width + spacing / 2.f) / spacing);
+    return loops_num * spacing + (type2 ? 0.f : spacing / 2.f);
+}
+
+float WipeTower::get_wrapping_detection_depth()
+{
+    return float(wrapping_wipe_tower_depth);
+}
+
+float WipeTower::nozzle_change_perimeter_width(float nozzle_diameter)
+{
+    auto it = nozzle_diameter_to_nozzle_change_width.find(nozzle_diameter);
+    return it != nozzle_diameter_to_nozzle_change_width.end() ? it->second : 2.f * nozzle_diameter * 1.25f;
+}
+
+float WipeTower::estimate_tower_blocks_depth(const std::vector<PurgeEstimate> &purges, float width, float layer_height, float nozzle_diameter, float extra_spacing)
+{
+    if (purges.empty() || layer_height < EPSILON || nozzle_diameter < EPSILON)
+        return 0.f;
+    const float pw         = nozzle_diameter * 1.25f; // Width_To_Nozzle_Ratio
+    const float ncpw       = nozzle_change_perimeter_width(nozzle_diameter);
+    const float line_width = width - 2.f * pw;
+    if (line_width <= EPSILON)
+        return 0.f;
+    // Line cross-section as volume_to_length() sees it; the infill gap stretches the perimeter
+    // width by the configured ratio and nozzle-change lines keep their own width
+    // (calc_block_infill_gap).
+    auto        line_area   = [layer_height](float w) { return layer_height * (w - layer_height * float(1. - M_PI_4)); };
+    const float extra_width = (extra_spacing - 1.f) * pw;
+    const float gap         = pw + extra_width;
+    const float nc_gap      = ncpw + extra_width;
+    // A layer purges into at most (filaments - 1) targets, so a category holding every filament
+    // never sees its smallest purge (the layer's first filament) in its worst layer.
+    struct Block { float depth = 0.f; float min_purge = 0.f; size_t filaments = 0; };
+    std::map<int, Block> blocks;
+    for (const PurgeEstimate &purge : purges) {
+        Block      &block       = blocks[purge.category];
+        const float purge_depth = std::ceil(purge.prime_volume / line_area(pw) / line_width) * gap;
+        block.min_purge         = block.filaments == 0 ? purge_depth : std::min(block.min_purge, purge_depth);
+        block.depth += purge_depth;
+        ++block.filaments;
+        if (purge.filament_change_length > EPSILON) {
+            // The leaving filament is rammed over the nozzle-change flow, again in whole lines.
+            const float filament_area = float(M_PI) * purge.filament_diameter * purge.filament_diameter / 4.f;
+            const float nc_length     = purge.filament_change_length * filament_area / line_area(ncpw);
+            block.depth += std::ceil(nc_length / (width - ncpw - pw)) * nc_gap;
+        }
+    }
+    float depth = pw; // plan_tower_new starts the first block one perimeter width in
+    for (const auto &[category, block] : blocks)
+        depth += block.filaments == purges.size() ? block.depth - block.min_purge : block.depth;
+    return depth;
+}
+
+float WipeTower::rib_footprint_side(float width, float depth, float rib_width, float extra_rib_length, float max_height)
+{
+    if (width < EPSILON || depth < EPSILON)
+        return 0.f;
+    // Ribs run the diagonal; below the height-based minimum they are extended rather than the
+    // body, then by the extra length, never ending up shorter than the diagonal.
+    const float diagonal   = std::sqrt(width * width + depth * depth);
+    float       rib_length = diagonal;
+    if (depth + EPSILON < get_limit_depth_by_height(max_height))
+        rib_length = std::max(rib_length, get_limit_depth_by_height(max_height) * float(std::sqrt(2.)));
+    rib_length = std::max(diagonal, rib_length + extra_rib_length);
+    // Half the extension at each end of the diagonal plus half the rib width, projected onto the axes.
+    const float rib_w    = std::min(rib_width, std::min(width, depth) / 2.f);
+    const float per_side = ((rib_length - diagonal) / 2.f + rib_w / 2.f) / float(std::sqrt(2.));
+    return std::max(width, depth) + 2.f * per_side;
+}
+
+float WipeTower::estimate_rib_tower_bbox_side(const std::vector<PurgeEstimate> &purges, float width, float layer_height, float nozzle_diameter, float extra_spacing, float rib_width, float extra_rib_length, float max_height)
+{
+    if (purges.empty() || width < EPSILON || layer_height < EPSILON || nozzle_diameter < EPSILON)
+        return 0.f;
+    const float pw     = nozzle_diameter * 1.25f; // Width_To_Nozzle_Ratio
+    const float square = align_ceil(std::sqrt(estimate_tower_blocks_depth(purges, width, layer_height, nozzle_diameter, extra_spacing) * width), pw);
+    const float depth  = estimate_tower_blocks_depth(purges, square, layer_height, nozzle_diameter, extra_spacing);
+    return rib_footprint_side(square, depth, rib_width, extra_rib_length, max_height);
+}
+
 Vec2f WipeTower::move_box_inside_polygon(const BoundingBox &box, const Polygons &polygons, coord_t offset)
 {
     if (polygons.empty()) return Vec2f{0.f, 0.f};
@@ -1791,7 +1903,7 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
     m_z_pos(0.f),
     //m_bridging(float(config.wipe_tower_bridging)),
     m_bridging(10.f),
-    m_no_sparse_layers(config.wipe_tower_no_sparse_layers),
+    m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)),
     m_gcode_flavor(config.gcode_flavor),
     m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
     m_current_tool(initial_tool),
@@ -2889,7 +3001,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer(bool extrude_perimeter, bool
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (! m_no_sparse_layers || toolchanges_on_layer)
+    if (! m_sparse_layers_skipped || toolchanges_on_layer)
         if (m_current_tool < m_used_filament_length.size())
             m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
 
@@ -2933,7 +3045,7 @@ void WipeTower::plan_toolchange(float z_par, float layer_height_par, unsigned in
 	if (m_plan.empty() || m_plan.back().z + WT_EPSILON < z_par) // if we moved to a new layer, we'll add it to m_plan first
 		m_plan.push_back(WipeTowerInfo(z_par, layer_height_par));
 
-    if (m_first_layer_idx == size_t(-1) && (! m_no_sparse_layers || old_tool != new_tool))
+    if (m_first_layer_idx == size_t(-1) && (! m_sparse_layers_skipped || old_tool != new_tool))
         m_first_layer_idx = m_plan.size() - 1;
 
     if (old_tool == new_tool)	// new layer without toolchanges - we are done
@@ -3221,7 +3333,7 @@ void WipeTower::get_wall_skip_points(const WipeTowerInfo &layer, int layer_id)
         if (!cur_block_depth.count(m_filpar[new_filament].category)) cur_block_depth[m_filpar[new_filament].category] = block->start_depth;
         process_depth = cur_block_depth[m_filpar[new_filament].category];
         if (is_need_ramming(new_filament, old_filament, layer_id)) {
-            if (m_filament_categories[new_filament] == m_filament_categories[old_filament])
+            if (get_filament_category(new_filament) == get_filament_category(old_filament))
                 process_depth += nozzle_change_depth;
             else {
                 if (!cur_block_depth.count(m_filpar[old_filament].category)) {
@@ -3786,7 +3898,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer_new(bool extrude_perimeter,
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (!m_no_sparse_layers || toolchanges_on_layer)
+    if (!m_sparse_layers_skipped || toolchanges_on_layer)
         if (m_current_tool < m_used_filament_length.size())
             m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
 
@@ -3896,7 +4008,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block(const WipeTowerBlock &block,
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (!m_no_sparse_layers || toolchanges_on_layer)
+    if (!m_sparse_layers_skipped || toolchanges_on_layer)
         if (filament_id < m_used_filament_length.size())
             m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length();
 
@@ -4013,7 +4125,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block_solid(const WipeTowerBlock &
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (!m_no_sparse_layers || toolchanges_on_layer)
+    if (!m_sparse_layers_skipped || toolchanges_on_layer)
         if (filament_id < m_used_filament_length.size())
             m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length();
 
@@ -4695,7 +4807,7 @@ int WipeTower::get_wall_filament_for_all_layer()
     int filament_id    = -1;
     int filament_count = 0;
     for (auto iter = filament_counts.begin(); iter != filament_counts.end(); ++iter) {
-        if (m_filament_categories[iter->first] == selected_category && iter->second > filament_count) {
+        if (get_filament_category(iter->first) == selected_category && iter->second > filament_count) {
             filament_id    = iter->first;
             filament_count = iter->second;
         }
@@ -4883,12 +4995,8 @@ void WipeTower::generate_new(std::vector<std::vector<WipeTower::ToolChangeResult
                     }
                 }
 
-                if (!has_inserted) {
-                    if (finish_block_tcr.gcode.empty())
-                        finish_block_tcr = finish_block_tcr;
-                    else
-                        finish_layer_tcr = merge_tcr(finish_layer_tcr, finish_block_tcr);
-                }
+                if (!has_inserted && !finish_block_tcr.gcode.empty())
+                    finish_layer_tcr = merge_tcr(finish_layer_tcr, finish_block_tcr);
             }
         }
         // record the contact layers of different categories
@@ -5071,7 +5179,7 @@ WipeTower::ToolChangeResult WipeTower::only_generate_out_wall(bool is_new_mode)
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (!m_no_sparse_layers || toolchanges_on_layer)
+    if (!m_sparse_layers_skipped || toolchanges_on_layer)
         if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
 
     return construct_tcr(writer, false, old_tool, true, false, 0.f, false);
diff --git a/src/libslic3r/GCode/WipeTower.hpp b/src/libslic3r/GCode/WipeTower.hpp
index 045c82cbf3..5426c9bd85 100644
--- a/src/libslic3r/GCode/WipeTower.hpp
+++ b/src/libslic3r/GCode/WipeTower.hpp
@@ -42,9 +42,36 @@ public:
 	static const std::map<float, float> min_depth_per_height;
     static float get_limit_depth_by_height(float max_height);
     static float get_auto_brim_by_height(float max_height);
+    // Both generators lay the brim in whole loops one line spacing apart, so the printed width
+    // differs from the configured one. WipeTower reports it with half a spacing of line width
+    // added, WipeTower2 reports the loops alone; an estimate has to round like the generator
+    // whose G-code it stands in for.
+    static float estimate_brim_real_width(float brim_width, float nozzle_diameter, float first_layer_height, bool type2);
+    // Depth a Type1 tower reserves once nothing but wrapping detection asks for one.
+    static float get_wrapping_detection_depth();
+    // Line width of the nozzle-change purge lines at this nozzle diameter.
+    static float nozzle_change_perimeter_width(float nozzle_diameter);
     static TriangleMesh                 its_make_rib_tower(float width, float depth, float height, float rib_length, float rib_width, bool fillet_wall);
     static TriangleMesh                 its_make_rib_brim(const Polygon& brim, float layer_height);
     static Polygon                      rib_section(float width, float depth, float rib_length, float rib_width, bool fillet_wall);
+    // One filament's share of a Type1 tower layer, as plan_tower_new() reserves it.
+    struct PurgeEstimate
+    {
+        float prime_volume           = 0.f;   // mm3 wiped after changing to this filament
+        int   category               = 0;     // filament_adhesiveness_category; one purge block per category
+        float filament_change_length = 0.f;   // mm of filament rammed when it leaves its nozzle; 0 when no nozzle change is planned
+        float filament_diameter      = 1.75f;
+    };
+    // Depth of the Type1 purge stack at the given width (also the rectangle-wall depth): each
+    // purge is whole lines at the block infill gap, one block per adhesiveness category sized by
+    // its worst layer, stacked behind one perimeter width.
+    static float estimate_tower_blocks_depth(const std::vector<PurgeEstimate> &purges, float width, float layer_height, float nozzle_diameter, float extra_spacing);
+    // Side of the square bounding a rib-wall tower's first layer, brim excluded: the body plus the
+    // rib bulge, with the ribs extended to the height-based minimum as both generators do.
+    static float rib_footprint_side(float width, float depth, float rib_width, float extra_rib_length, float max_height);
+    // Type1 rib tower: plan_tower_new() squares the tower from the depth at the configured width,
+    // then re-plans the depth at the squared width.
+    static float estimate_rib_tower_bbox_side(const std::vector<PurgeEstimate> &purges, float width, float layer_height, float nozzle_diameter, float extra_spacing, float rib_width, float extra_rib_length, float max_height);
     // Translation that brings a footprint inside the printable outline, padded by offset. The prime
     // tower is validated against the real outline (see layered_print_cleareance_valid), so clamping
     // against the bounding box alone would leave it off a delta or hexagonal bed. box and polygons
@@ -494,7 +521,7 @@ private:
     //float           m_parking_pos_retraction    = 0.f;
     //float           m_extra_loading_move        = 0.f;
     float           m_bridging                  = 0.f;
-    bool            m_no_sparse_layers          = false;
+    bool            m_sparse_layers_skipped     = false;
     // BBS: remove useless config
     //bool            m_set_extruder_trimpot      = false;
     bool            m_adhesion                  = true;
@@ -653,6 +680,24 @@ private:
 };
 
 
+// Compaction rule for wipe_tower_no_sparse_layers. Shared by the G-code emitter and by the
+// clearance validator so that both agree on where the compacted tower actually sits; a drift
+// between the two would either let a real nozzle collision through or reject a safe plate.
+
+// Whether sparse layers are really skipped, i.e. whether the tower is compacted at all. Smooth
+// timelapse and wrapping detection put a tower on every layer, so no layer is ever dropped and the
+// tower keeps following the object even though the option is on. Tower planning, G-code emission and
+// the clearance validator all ask this single question, so none of them can compact on its own.
+bool wipe_tower_sparse_layers_skipped(const PrintConfig &config);
+
+// A planned layer prints no tower at all when its only toolchange keeps the same filament.
+bool wipe_tower_layer_is_sparse(const std::vector<WipeTower::ToolChangeResult> &layer_tool_changes);
+
+// Print z the compacted tower reaches on every planned layer. Sparse layers carry over the
+// previous value, so the tower falls one layer height behind the object for each of them. base_z is
+// the z the tower starts from, which Orca offsets by z_offset.
+std::vector<float> compute_compacted_wipe_tower_z(const std::vector<std::vector<WipeTower::ToolChangeResult>> &tool_changes,
+                                                  float base_z = 0.f);
 
 
 } // namespace Slic3r
diff --git a/src/libslic3r/GCode/WipeTower2.cpp b/src/libslic3r/GCode/WipeTower2.cpp
index ee0f9c375a..0080094270 100644
--- a/src/libslic3r/GCode/WipeTower2.cpp
+++ b/src/libslic3r/GCode/WipeTower2.cpp
@@ -1032,7 +1032,7 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau
     m_y_shift(0.f),
     m_z_pos(0.f),
     m_bridging(float(config.wipe_tower_bridging)),
-    m_no_sparse_layers(config.wipe_tower_no_sparse_layers),
+    m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)),
     m_gcode_flavor(config.gcode_flavor),
     m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
     m_infill_speed(default_region_config.sparse_infill_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
@@ -1730,7 +1730,7 @@ void WipeTower2::toolchange_Change(
         } else if (m_wall_type == (int)wtwCone) {
             const double support_scale = get_wipe_tower_cone_base(m_wipe_tower_width, m_wipe_tower_height, m_wipe_tower_depth,
                                                                   m_wipe_tower_cone_angle).second;
-            const double z = m_no_sparse_layers ? (m_current_height + m_layer_info->height) : m_layer_info->z;
+            const double z = m_sparse_layers_skipped ? (m_current_height + m_layer_info->height) : m_layer_info->z;
             const double r = std::tan(Geometry::deg2rad(m_wipe_tower_cone_angle / 2.f)) * (m_wipe_tower_height - z);
             const double w = m_layer_info->depth + m_perimeter_width;
             if (r > 0.5 * w + 0.01) { // same guard as generate_support_cone_wall
@@ -1872,7 +1872,7 @@ void WipeTower2::toolchange_Wipe(
     // All the calculations in all other places take the spacing into account for all the layers.
 
 	// If spare layers are excluded->if 1 or less toolchange has been done, it must be sill the first layer, too.So slow down.
-    const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers) ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f);
+    const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_sparse_layers_skipped) ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f);
     float wipe_speed = 0.33f * target_speed;
 
     // if there is less than 2.5*line_width to the edge, advance straightaway (there is likely a blob anyway)
@@ -1970,7 +1970,7 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer()
 
     // Slow down on the 1st layer.
     // If spare layers are excluded -> if 1 or less toolchange has been done, it must be still the first layer, too. So slow down.
-    bool first_layer = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers);
+    bool first_layer = is_first_layer() || (m_num_tool_changes <= 1 && m_sparse_layers_skipped);
     float                      feedrate      = first_layer ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f);
     if (m_enable_tower_interface_features && m_prev_layer_had_interface)
         feedrate = std::min(feedrate, 20.f * 60.f);
@@ -2103,7 +2103,7 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer()
 
     // Ask our writer about how much material was consumed.
     // Skip this in case the layer is sparse and config option to not print sparse layers is enabled.
-    if (! m_no_sparse_layers || toolchanges_on_layer || first_layer) {
+    if (! m_sparse_layers_skipped || toolchanges_on_layer || first_layer) {
         if (m_current_tool < m_used_filament_length.size())
             m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
         m_current_height += m_layer_info->height;
@@ -2129,6 +2129,23 @@ std::pair<double, double> WipeTower2::get_wipe_tower_cone_base(double width, dou
     return std::make_pair(R, support_scale);
 }
 
+Polygon WipeTower2::cone_base_polygon(double width, double depth, double height, double angle_deg)
+{
+    Polygon box({Point::new_scale(Vec2d(0., 0.)), Point::new_scale(Vec2d(width, 0.)),
+                 Point::new_scale(Vec2d(width, depth)), Point::new_scale(Vec2d(0., depth))});
+    if (angle_deg <= EPSILON || height <= EPSILON || width <= EPSILON || depth <= EPSILON)
+        return box;
+    const auto [R, x_scale] = get_wipe_tower_cone_base(width, height, depth, angle_deg);
+    if (R <= EPSILON)
+        return box;
+    const Vec2d center(width / 2., depth / 2.);
+    Polygon ellipse;
+    for (double alpha = 0.; alpha < 2. * M_PI; alpha += M_PI / 20.)
+        ellipse.points.push_back(Point::new_scale(center + R * Vec2d(std::cos(alpha) / x_scale, std::sin(alpha))));
+    Polygons u = union_({box, ellipse});
+    return u.empty() ? box : u.front();
+}
+
 // Static method to extract wipe_volumes[from][to] from the configuration.
 // Takes a ConfigBase so the GUI's wipe tower size estimate can pass the plate's
 // DynamicPrintConfig directly instead of materializing a full PrintConfig per call.
@@ -2209,7 +2226,7 @@ void WipeTower2::plan_toolchange(float z_par, float layer_height_par, unsigned i
 	if (m_plan.empty() || m_plan.back().z + WT_EPSILON < z_par) // if we moved to a new layer, we'll add it to m_plan first
 		m_plan.push_back(WipeTowerInfo(z_par, layer_height_par));
 
-    if (m_first_layer_idx == size_t(-1) && (! m_no_sparse_layers || old_tool != new_tool || m_plan.size() == 1))
+    if (m_first_layer_idx == size_t(-1) && (! m_sparse_layers_skipped || old_tool != new_tool || m_plan.size() == 1))
         m_first_layer_idx = m_plan.size() - 1;
 
     if (old_tool == new_tool)	// new layer without toolchanges - we are done
@@ -2635,7 +2652,7 @@ Polygon WipeTower2::generate_support_cone_wall(
     const auto [R, support_scale] = get_wipe_tower_cone_base(m_wipe_tower_width, m_wipe_tower_height, m_wipe_tower_depth,
                                                              m_wipe_tower_cone_angle);
 
-    double z = m_no_sparse_layers ?
+    double z = m_sparse_layers_skipped ?
                    (m_current_height + m_layer_info->height) :
                    m_layer_info->z; // the former should actually work in both cases, but let's stay on the safe side (the 2.6.0 is close)
 
diff --git a/src/libslic3r/GCode/WipeTower2.hpp b/src/libslic3r/GCode/WipeTower2.hpp
index 5b1a474b5d..eb3a2562fb 100644
--- a/src/libslic3r/GCode/WipeTower2.hpp
+++ b/src/libslic3r/GCode/WipeTower2.hpp
@@ -27,6 +27,10 @@ public:
     // in WipeTowerIntegration::append_tcr2 does not strip it.
     static const std::string wait_for_temp_tag() { return ";_WAIT_FOR_TEMP_ON_WIPE_TOWER"; }
 	static std::pair<double, double> get_wipe_tower_cone_base(double width, double height, double depth, double angle_deg);
+	// First-layer outline of a cone-wall tower in tower-local (scaled) coordinates: body box
+	// unioned with the cone's base ellipse — the model first_layer_wipe_tower_corners uses,
+	// and generate_support_cone_wall stays within it. Brim not included.
+	static Polygon cone_base_polygon(double width, double depth, double height, double angle_deg);
 	static std::vector<std::vector<float>> extract_wipe_volumes(const ConfigBase& config);
 	// Estimated total flush volume of a SEMM print with the given number of filaments,
 	// used to reserve wipe tower space before the tower is generated.
@@ -263,7 +267,7 @@ private:
     float           m_parking_pos_retraction    = 0.f;
     float           m_extra_loading_move        = 0.f;
     float           m_bridging                  = 0.f;
-    bool            m_no_sparse_layers          = false;
+    bool            m_sparse_layers_skipped     = false;
     bool            m_set_extruder_trimpot      = false;
     bool            m_adhesion                  = true;
     GCodeFlavor     m_gcode_flavor;
diff --git a/src/libslic3r/GCode/WipeTowerEstimate.cpp b/src/libslic3r/GCode/WipeTowerEstimate.cpp
new file mode 100644
index 0000000000..d8cfe74527
--- /dev/null
+++ b/src/libslic3r/GCode/WipeTowerEstimate.cpp
@@ -0,0 +1,202 @@
+#include "WipeTowerEstimate.hpp"
+
+#include "WipeTower.hpp"
+#include "WipeTower2.hpp"
+#include "../Config.hpp"
+#include "../PrintConfig.hpp"
+#include "../libslic3r.h"
+
+#include <algorithm>
+#include <cmath>
+#include <set>
+
+namespace Slic3r {
+
+// Every caller today declares all these keys, but the signature accepts any ConfigBase: fall
+// back to the key's declared default, never to a hand-copied constant.
+static const ConfigOption *option_of(const ConfigBase &config, const char *key)
+{
+    if (const ConfigOption *opt = config.option(key); opt != nullptr)
+        return opt;
+    if (const ConfigDef *def = config.def(); def != nullptr)
+        if (const ConfigOptionDef *opt_def = def->get(key); opt_def != nullptr)
+            return opt_def->default_value.get();
+    return nullptr;
+}
+
+WipeTowerType resolve_wipe_tower_type(const ConfigBase &config)
+{
+    // printer_model is what the CLI keys its Bambu Lab detection on; the GUI's vendor flag
+    // agrees for every shipped profile.
+    if (const auto *model = dynamic_cast<const ConfigOptionString *>(config.option("printer_model"));
+        model != nullptr && model->value.compare(0, 9, "Bambu Lab") == 0)
+        return WipeTowerType::Type1;
+    // By value, not by concrete type: a static PrintConfig holds ConfigOptionEnum<T>, a
+    // DynamicConfig built from presets holds ConfigOptionEnumGeneric, and both answer getInt().
+    const ConfigOption *type = option_of(config, "wipe_tower_type");
+    return type != nullptr ? WipeTowerType(type->getInt()) : WipeTowerType::Type2;
+}
+
+Polygon estimate_wipe_tower_first_layer_outline(const ConfigBase &config, WipeTowerType tower_type, double width, double depth, double height)
+{
+    // Type1 ignores the cone option. The wall type is read by value: a preset-shaped config
+    // holds it as ConfigOptionEnumGeneric, which a cast to ConfigOptionEnum<T> cannot see.
+    const ConfigOption *wall_type  = option_of(config, "wipe_tower_wall_type");
+    const ConfigOption *cone_angle = option_of(config, "wipe_tower_cone_angle");
+    const bool          cone       = tower_type == WipeTowerType::Type2 && wall_type != nullptr &&
+                         wall_type->getInt() == int(WipeTowerWallType::wtwCone) && cone_angle != nullptr;
+    return WipeTower2::cone_base_polygon(width, depth, height, cone ? cone_angle->getFloat() : 0.);
+}
+
+WipeTowerFootprint estimate_wipe_tower_footprint(const ConfigBase &config, WipeTowerType tower_type, const std::vector<unsigned int> &filament_ids, double layer_height, double max_object_height)
+{
+    WipeTowerFootprint footprint;
+    footprint.height = max_object_height;
+    const size_t filaments_cnt = filament_ids.size();
+    if (filaments_cnt == 0 || layer_height < EPSILON)
+        return footprint;
+
+    auto opt_float = [&config](const char *key) {
+        const ConfigOption *opt = option_of(config, key);
+        return opt != nullptr ? opt->getFloat() : 0.;
+    };
+    auto opt_bool = [&config](const char *key) {
+        const ConfigOption *opt = option_of(config, key);
+        return opt != nullptr && opt->getBool();
+    };
+    auto opt_enum = [&config](const char *key, int fallback) {
+        const ConfigOption *opt = option_of(config, key);
+        return opt != nullptr ? opt->getInt() : fallback;
+    };
+    auto floats_of = [&config](const char *key) { return dynamic_cast<const ConfigOptionFloats *>(option_of(config, key)); };
+    auto max_of = [&floats_of](const char *key, double fallback) {
+        const auto *opt = floats_of(key);
+        return (opt != nullptr && !opt->values.empty()) ? *std::max_element(opt->values.begin(), opt->values.end()) : fallback;
+    };
+    auto float_at = [&floats_of](const char *key, unsigned int id, double fallback) {
+        const auto *opt = floats_of(key);
+        return (opt != nullptr && !opt->values.empty()) ? opt->get_at(id) : fallback;
+    };
+    auto int_at = [&config](const char *key, unsigned int id, int fallback) {
+        const auto *opt = dynamic_cast<const ConfigOptionInts *>(option_of(config, key));
+        return (opt != nullptr && !opt->values.empty()) ? opt->get_at(id) : fallback;
+    };
+
+    // Both planners size every layer, so the tower has to fit its thinnest one: the first layer
+    // when it is printed thinner than the rest.
+    const double first_layer_height = opt_float("initial_layer_print_height");
+    if (first_layer_height > EPSILON)
+        layer_height = std::min(layer_height, first_layer_height);
+
+    const bool   type1            = tower_type == WipeTowerType::Type1;
+    const double width            = opt_float("prime_tower_width");
+    const double prime_volume     = opt_float("prime_volume");
+    // Type1 spaces its purge lines by prime_tower_infill_gap, Type2 by wipe_tower_extra_spacing.
+    // Type2's extra flow cancels out of the depth: the line length is divided by it and the row
+    // pitch multiplied by it (WipeTower2::get_wipe_depth).
+    const double extra_spacing    = opt_float(type1 ? "prime_tower_infill_gap" : "wipe_tower_extra_spacing") / 100.;
+    const double rib_width        = opt_float("wipe_tower_rib_width");
+    const double extra_rib_length = opt_float("wipe_tower_extra_rib_length");
+    const auto  *nozzle_opt       = floats_of("nozzle_diameter");
+    const double nozzle_diameter  = (nozzle_opt != nullptr && !nozzle_opt->values.empty()) ? nozzle_opt->values.front() : 0.4;
+    const bool   dual_nozzle      = nozzle_opt != nullptr && nozzle_opt->values.size() == 2;
+    const bool   rib_wall         = opt_enum("wipe_tower_wall_type", int(WipeTowerWallType::wtwRectangle)) == int(WipeTowerWallType::wtwRib);
+    const bool   smooth_timelapse = opt_enum("timelapse_type", int(TimelapseType::tlTraditional)) == int(TimelapseType::tlSmooth);
+    const bool   wrapping         = opt_bool("enable_wrapping_detection");
+    // Reasons a tower is printed with no tool change to purge for: the ones that stop
+    // normalize_fdm_2 clearing enable_prime_tower. Its mixed-filament case is not modelled.
+    const bool   need_wipe_tower  = smooth_timelapse || wrapping;
+
+    // A tower printed for one of the reasons above has no tool change to purge for; both
+    // planners give it the idle depth below and nothing more.
+    const size_t purge_count = filaments_cnt > 1 ? (dual_nozzle ? filaments_cnt : filaments_cnt - 1) : 0;
+
+    // Type2 purges one volume per tool change. Type1 plans per filament below; here the volume
+    // only decides whether a tower exists.
+    double volume = prime_volume * double(purge_count);
+    if (dual_nozzle) {
+        // Dual-nozzle printers also purge the filament change length on the tower.
+        const double length   = max_of("filament_change_length", 0.);
+        const double diameter = max_of("filament_diameter", 1.75);
+        volume += length * PI * diameter * diameter / 4. * double(filaments_cnt / 2);
+    }
+    // Single-extruder multi-material purges the flush matrix instead of the prime volume.
+    const bool semm_flush = opt_bool("purge_in_prime_tower") && opt_bool("single_extruder_multi_material");
+    if (semm_flush)
+        volume = WipeTower2::estimate_semm_flush_volume(config, filaments_cnt);
+
+    // The Type1 planner wipes each filament's own prime volume after changing to it, in a block
+    // per adhesiveness category. On a two-nozzle printer the leaving filament is also rammed at
+    // every nozzle change; the tool order groups filaments by nozzle, so a layer crosses
+    // (nozzles used - 1) times, charged here to the longest ramming.
+    std::vector<WipeTower::PurgeEstimate> purges;
+    if (type1 && filaments_cnt > 1) {
+        const bool    saving_mode = opt_enum("prime_volume_mode", int(PrimeVolumeMode::pvmDefault)) == int(PrimeVolumeMode::pvmSaving);
+        std::set<int> nozzles;
+        size_t        longest_ramming = 0;
+        for (size_t i = 0; i < filaments_cnt; ++i) {
+            const unsigned int         id = filament_ids[i];
+            WipeTower::PurgeEstimate purge;
+            purge.prime_volume      = saving_mode ? 15.f : float(float_at("filament_prime_volume", id, prime_volume));
+            purge.category          = int_at("filament_adhesiveness_category", id, 0);
+            purge.filament_diameter = float(float_at("filament_diameter", id, 1.75));
+            purges.push_back(purge);
+            if (dual_nozzle) {
+                nozzles.insert(int_at("filament_map", id, 1));
+                if (float_at("filament_change_length", id, 0.) > float_at("filament_change_length", filament_ids[longest_ramming], 0.))
+                    longest_ramming = i;
+            }
+        }
+        if (nozzles.size() > 1)
+            purges[longest_ramming].filament_change_length = float(float_at("filament_change_length", filament_ids[longest_ramming], 0.) * double(nozzles.size() - 1));
+    }
+
+    // Both wall types decide this together: over-reserving only wastes bed area, but reporting
+    // no tower for one that is built collapses the validation hull to a point.
+    // A tool change is a reason on its own (see the base commit); Type1 already reserves
+    // per filament, Type2 has only the volume, which can resolve to zero.
+    const bool has_purge = type1 ? !purges.empty() : volume > EPSILON;
+    if (!has_purge && filaments_cnt < 2 && !need_wipe_tower)
+        return footprint;
+
+    const double min_depth      = WipeTower::get_limit_depth_by_height(float(max_object_height));
+    const float  perimeter_width = float(nozzle_diameter) * 1.25f; // Width_To_Nozzle_Ratio
+    // With nothing to purge, plan_tower_new sizes the tower for wrapping detection or the
+    // stability minimum; WipeTower2 only knows the latter.
+    const double idle_depth = (type1 && wrapping && !smooth_timelapse) ? WipeTower::get_wrapping_detection_depth() : min_depth;
+    if (rib_wall) {
+        // Both planners square the tower to the purge area and extend the ribs, not the body,
+        // below the stability minimum.
+        double side;
+        if (!purges.empty())
+            side = WipeTower::estimate_rib_tower_bbox_side(purges, float(width), float(layer_height), float(nozzle_diameter), float(extra_spacing), float(rib_width), float(extra_rib_length), float(max_object_height));
+        else {
+            const double square = has_purge ? std::sqrt(volume / layer_height * extra_spacing) : idle_depth;
+            side = WipeTower::rib_footprint_side(float(square), float(square), float(rib_width), float(extra_rib_length), float(max_object_height));
+        }
+        footprint.width = footprint.depth = side;
+    } else {
+        double depth;
+        if (type1) {
+            // plan_tower_new stretches a short purge stack to the stability minimum behind its
+            // leading perimeter width.
+            depth = purges.empty() ? idle_depth : std::max(min_depth + perimeter_width, double(WipeTower::estimate_tower_blocks_depth(purges, float(width), float(layer_height), float(nozzle_diameter), float(extra_spacing))));
+        } else {
+            depth = volume / (layer_height * width);
+            // The flush volumes already hold the spacing between wipes.
+            if (!semm_flush)
+                depth *= extra_spacing;
+            depth = std::max(min_depth, depth);
+        }
+        footprint.width = width;
+        footprint.depth = depth;
+    }
+
+    footprint.brim_width = opt_float("prime_tower_brim_width");
+    if (footprint.brim_width < 0)
+        footprint.brim_width = WipeTower::get_auto_brim_by_height(float(max_object_height));
+    footprint.brim_width = WipeTower::estimate_brim_real_width(float(footprint.brim_width), float(nozzle_diameter), float(first_layer_height > EPSILON ? first_layer_height : layer_height), !type1);
+    return footprint;
+}
+
+} // namespace Slic3r
diff --git a/src/libslic3r/GCode/WipeTowerEstimate.hpp b/src/libslic3r/GCode/WipeTowerEstimate.hpp
new file mode 100644
index 0000000000..387028649b
--- /dev/null
+++ b/src/libslic3r/GCode/WipeTowerEstimate.hpp
@@ -0,0 +1,47 @@
+#pragma once
+
+#include <vector>
+
+#include "../Polygon.hpp"
+
+namespace Slic3r {
+
+class ConfigBase;
+enum class WipeTowerType;
+
+// Pre-slice footprint of the wipe tower, shared by validation (Print), the GUI's placement
+// clamp/preview/arrange and the CLI placement. The arithmetic is shared; the inputs below are
+// not, so a change to how one caller derives them has to be mirrored in the others.
+struct WipeTowerFootprint
+{
+    double width      = 0.; // effective width: equals depth for a rib wall, which squares the tower
+    double depth      = 0.; // 0 when these inputs imply no tower
+    double height     = 0.; // tallest object; drives the stability floor and the auto brim
+    double brim_width = 0.; // printed width: auto (-1) resolved by height, laid in whole loops
+};
+
+// Which planner builds the tower: Bambu Lab printers always get Type1, the rest follow
+// wipe_tower_type. The rule Print::wipe_tower_type() and the CLI apply, read off the config so
+// the GUI and CLI placement can resolve it without a Print.
+WipeTowerType resolve_wipe_tower_type(const ConfigBase &config);
+
+// First-layer outline of an estimated tower in tower-local scaled coordinates, brim excluded:
+// the body box, or for a Type2 cone wall the box unioned with the cone's base. The preview,
+// the placement margin and validation all take the outline from here so they cannot disagree
+// about whether a cone exists.
+Polygon estimate_wipe_tower_first_layer_outline(const ConfigBase &config, WipeTowerType tower_type, double width, double depth, double height);
+
+// filament_ids:  0-based filaments purged on the plate. The config cannot see custom G-code tool
+//                changes, so ids derived from the model must include them
+//                (Print::extruders(true)) or a real tower is sized as if it were never built.
+// layer_height:  thinnest layer the objects are sliced at. The first layer is folded in here.
+//
+// A raft is deliberately not a reason: normalize_fdm_2 clears enable_prime_tower for a plate
+// purging one filament unless smooth timelapse or wrapping detection is on.
+WipeTowerFootprint estimate_wipe_tower_footprint(const ConfigBase                &config,
+                                                 WipeTowerType                    tower_type,
+                                                 const std::vector<unsigned int> &filament_ids,
+                                                 double                           layer_height,
+                                                 double                           max_object_height);
+
+} // namespace Slic3r
diff --git a/src/libslic3r/Int128.hpp b/src/libslic3r/Int128.hpp
index e7238ca745..e55ef64cfb 100644
--- a/src/libslic3r/Int128.hpp
+++ b/src/libslic3r/Int128.hpp
@@ -57,7 +57,7 @@
 	#define HAS_INTRINSIC_128_TYPE
 #endif
 
-#if defined(_MSC_VER) && defined(_WIN64)
+#if defined(_MSC_VER) && defined(_M_X64)
 	#include <intrin.h>
 	#pragma intrinsic(_mul128)
 #endif
diff --git a/src/libslic3r/LayOnFace.cpp b/src/libslic3r/LayOnFace.cpp
new file mode 100644
index 0000000000..1112f9d2fe
--- /dev/null
+++ b/src/libslic3r/LayOnFace.cpp
@@ -0,0 +1,221 @@
+#include "LayOnFace.hpp"
+
+#include "Geometry.hpp"
+#include "Geometry/ConvexHull.hpp"
+#include "Model.hpp"
+#include "TriangleMesh.hpp"
+
+#include <algorithm>
+#include <cmath>
+#include <numeric>
+
+namespace Slic3r {
+
+std::vector<LayOnFacePlane> lay_on_face_planes(const ModelObject &object, const Transform3d &inst_matrix)
+{
+    // An object can only rest on its convex hull, so candidate faces are taken from the hull of all model parts.
+    TriangleMesh ch;
+    for (const ModelVolume* vol : object.volumes) {
+        if (vol->type() != ModelVolumeType::MODEL_PART)
+            continue;
+        TriangleMesh vol_ch = vol->get_convex_hull();
+        vol_ch.transform(vol->get_matrix());
+        ch.merge(vol_ch);
+    }
+    ch = ch.convex_hull_3d();
+    std::vector<LayOnFacePlane> planes;
+
+    // Following constants are used for discarding too small polygons.
+    const float minimal_area = 5.f; // in square mm (world coordinates)
+    const float minimal_side = 1.f; // mm
+    const float minimal_angle = 1.f; // degree, initial value was 10, but cause bugs
+
+    // Now we'll go through all the facets and append Points of facets sharing the same normal.
+    // This part is still performed in mesh coordinate system.
+    const int                num_of_facets  = ch.facets_count();
+    const std::vector<Vec3f> face_normals   = its_face_normals(ch.its);
+    const std::vector<Vec3i32> face_neighbors = its_face_neighbors(ch.its);
+    std::vector<int>         facet_queue(num_of_facets, 0);
+    std::vector<bool>        facet_visited(num_of_facets, false);
+    int                      facet_queue_cnt = 0;
+    const stl_normal*        normal_ptr      = nullptr;
+    int                      facet_idx       = 0;
+    while (1) {
+        // Find next unvisited triangle:
+        for (; facet_idx < num_of_facets; ++ facet_idx)
+            if (!facet_visited[facet_idx]) {
+                facet_queue[facet_queue_cnt ++] = facet_idx;
+                facet_visited[facet_idx] = true;
+                normal_ptr = &face_normals[facet_idx];
+                planes.emplace_back();
+                break;
+            }
+        if (facet_idx == num_of_facets)
+            break; // Everything was visited already
+
+        while (facet_queue_cnt > 0) {
+            int facet_idx = facet_queue[-- facet_queue_cnt];
+            const stl_normal& this_normal = face_normals[facet_idx];
+            if (std::abs(this_normal(0) - (*normal_ptr)(0)) < 0.001 && std::abs(this_normal(1) - (*normal_ptr)(1)) < 0.001 && std::abs(this_normal(2) - (*normal_ptr)(2)) < 0.001) {
+                const Vec3i32 face = ch.its.indices[facet_idx];
+                for (int j=0; j<3; ++j)
+                    planes.back().outline.emplace_back(ch.its.vertices[face[j]].cast<double>());
+
+                facet_visited[facet_idx] = true;
+                for (int j = 0; j < 3; ++ j)
+                    if (int neighbor_idx = face_neighbors[facet_idx][j]; neighbor_idx >= 0 && ! facet_visited[neighbor_idx])
+                        facet_queue[facet_queue_cnt ++] = neighbor_idx;
+            }
+        }
+        planes.back().normal = normal_ptr->cast<double>();
+
+        Pointf3s& verts = planes.back().outline;
+        // Now we'll transform all the points into world coordinates, so that the areas, angles and distances
+        // make real sense.
+        verts = transform(verts, inst_matrix);
+
+        // if this is a just a very small triangle, remove it to speed up further calculations (it would be rejected later anyway):
+        if (verts.size() == 3 &&
+            ((verts[0] - verts[1]).norm() < minimal_side
+            || (verts[0] - verts[2]).norm() < minimal_side
+            || (verts[1] - verts[2]).norm() < minimal_side))
+            planes.pop_back();
+    }
+
+    // Let's prepare transformation of the normal vector from mesh to instance coordinates.
+    const Matrix3d normal_matrix = inst_matrix.matrix().block(0, 0, 3, 3).inverse().transpose();
+
+    // Now we'll go through all the polygons, transform the points into xy plane to process them:
+    for (unsigned int polygon_id=0; polygon_id < planes.size(); ++polygon_id) {
+        Pointf3s& polygon = planes[polygon_id].outline;
+        const Vec3d& normal = planes[polygon_id].normal;
+
+        // transform the normal according to the instance matrix:
+        const Vec3d normal_transformed = normal_matrix * normal;
+
+        // We are going to rotate about z and y to flatten the plane
+        Eigen::Quaterniond q;
+        Transform3d& m = planes[polygon_id].to_plane_frame;
+        m = Transform3d::Identity();
+        m.matrix().block(0, 0, 3, 3) = q.setFromTwoVectors(normal_transformed, Vec3d::UnitZ()).toRotationMatrix();
+        polygon = transform(polygon, m);
+
+        // Now to remove the inner points. We'll misuse Geometry::convex_hull for that, but since
+        // it works in fixed point representation, we will rescale the polygon to avoid overflows.
+        // And yes, it is a nasty thing to do. Whoever has time is free to refactor.
+        Vec3d bb_size = BoundingBoxf3(polygon).size();
+        float sf = std::min(1./bb_size(0), 1./bb_size(1));
+        Transform3d tr = Geometry::scale_transform({ sf, sf, 1.f });
+        polygon = transform(polygon, tr);
+        polygon = Slic3r::Geometry::convex_hull(polygon);
+        polygon = transform(polygon, tr.inverse());
+
+        // Calculate area of the polygons and discard ones that are too small
+        float& area = planes[polygon_id].area;
+        area = 0.f;
+        for (unsigned int i = 0; i < polygon.size(); i++) // Shoelace formula
+            area += polygon[i](0)*polygon[i + 1 < polygon.size() ? i + 1 : 0](1) - polygon[i + 1 < polygon.size() ? i + 1 : 0](0)*polygon[i](1);
+        area = 0.5f * std::abs(area);
+
+        bool discard = false;
+        if (area < minimal_area)
+            discard = true;
+        else {
+            // We also check the inner angles and discard polygons with angles smaller than the following threshold
+            const double angle_threshold = ::cos(minimal_angle * (double)PI / 180.0);
+
+            for (unsigned int i = 0; i < polygon.size(); ++i) {
+                const Vec3d& prec = polygon[(i == 0) ? polygon.size() - 1 : i - 1];
+                const Vec3d& curr = polygon[i];
+                const Vec3d& next = polygon[(i == polygon.size() - 1) ? 0 : i + 1];
+
+                if ((prec - curr).normalized().dot((next - curr).normalized()) > angle_threshold) {
+                    discard = true;
+                    break;
+                }
+            }
+        }
+
+        if (discard) {
+            planes[polygon_id--] = std::move(planes.back());
+            planes.pop_back();
+            continue;
+        }
+
+        const Vec3d centroid = std::accumulate(polygon.begin(), polygon.end(), Vec3d(0.0, 0.0, 0.0)) / double(polygon.size());
+        planes[polygon_id].center = inst_matrix.inverse() * (m.inverse() * centroid);
+    }
+
+    std::sort(planes.rbegin(), planes.rend(), [](const LayOnFacePlane& a, const LayOnFacePlane& b) { return a.area < b.area; });
+    return planes;
+}
+
+int find_largest_plane(const std::vector<LayOnFacePlane> &planes)
+{
+    // The plane frame maps the instance normal to +Z, so the normal's z in instance coordinates is element (2, 2).
+    auto downward = [](const LayOnFacePlane &plane) { return -plane.to_plane_frame.linear()(2, 2); };
+    // Areas are floats from rounded geometry, so faces within 0.1% count as equal.
+    int best = -1;
+    for (size_t i = 0; i < planes.size() && planes[i].area >= planes.front().area * (1. - 1e-3); ++i)
+        if (best < 0 || downward(planes[i]) > downward(planes[best]))
+            best = int(i);
+    return best;
+}
+
+int find_plane_by_normal(const std::vector<LayOnFacePlane> &planes, const Vec3d &direction)
+{
+    const Vec3d dir  = direction.normalized();
+    int         best = -1;
+    double      best_dot = -2.;
+    for (size_t i = 0; i < planes.size(); ++i)
+        if (const double dot = planes[i].normal.dot(dir); dot > best_dot) {
+            best_dot = dot;
+            best     = int(i);
+        }
+    return best;
+}
+
+int find_plane_at_point(const std::vector<LayOnFacePlane> &planes, const Transform3d &instance_matrix_no_offset,
+                        const Vec3d &point, double tolerance)
+{
+    const Vec3d instance_point = instance_matrix_no_offset * point;
+    for (size_t i = 0; i < planes.size(); ++i) {
+        const Pointf3s &outline = planes[i].outline;
+        if (outline.empty())
+            continue;
+        const Vec3d p = planes[i].to_plane_frame * instance_point;
+        // Facets with slightly different normals are merged into one face, so the outline is not exactly flat.
+        const double z = std::accumulate(outline.begin(), outline.end(), 0., [](double sum, const Vec3d &v) { return sum + v.z(); }) / double(outline.size());
+        if (std::abs(p.z() - z) > tolerance)
+            continue;
+        // The outline is convex: the point is inside when it is not on both sides of its edges.
+        bool left = false, right = false;
+        for (size_t j = 0; j < outline.size(); ++j) {
+            const Vec2d  a    = outline[j].head<2>();
+            const Vec2d  edge = outline[(j + 1) % outline.size()].head<2>() - a;
+            const double len  = edge.norm();
+            if (len < EPSILON)
+                continue;
+            const double side = cross2(edge, Vec2d(p.head<2>() - a)) / len;
+            left  |= side > tolerance;
+            right |= side < -tolerance;
+        }
+        if (!(left && right))
+            return int(i);
+    }
+    return -1;
+}
+
+void lay_on_face(ModelObject &object, size_t instance_idx, const Vec3d &normal)
+{
+    ModelInstance                  &instance = *object.instances[instance_idx];
+    const Geometry::Transformation &trafo    = instance.get_transformation();
+    // Same rotation as Selection::flattening_rotate(): turn the transformed normal to point down.
+    const Vec3d       tnormal  = trafo.get_matrix().matrix().block(0, 0, 3, 3).inverse().transpose() * normal;
+    const Transform3d rotation = Transform3d(Eigen::Quaterniond().setFromTwoVectors(tnormal, -Vec3d::UnitZ()));
+    instance.set_transformation(Geometry::Transformation(trafo.get_offset_matrix() * rotation * trafo.get_matrix_no_offset()));
+    // Drop this instance only: ensure_on_bed() skips instances without auto_drop and measures the first instance.
+    object.translate_instance(instance_idx, -object.instance_bounding_box(instance_idx).min.z() * Vec3d::UnitZ());
+}
+
+} // namespace Slic3r
diff --git a/src/libslic3r/LayOnFace.hpp b/src/libslic3r/LayOnFace.hpp
new file mode 100644
index 0000000000..1a5e92a15e
--- /dev/null
+++ b/src/libslic3r/LayOnFace.hpp
@@ -0,0 +1,48 @@
+#pragma once
+
+#include "Point.hpp"
+
+#include <vector>
+
+namespace Slic3r {
+
+class ModelObject;
+
+// A face of an object's convex hull that the object can rest on. These are the faces the
+// "Lay on Face" gizmo offers and the ones the CLI --ground-* options choose from.
+//
+// Frames: "object" coordinates have the volume transformations applied but not the instance
+// transformation. "Instance" coordinates additionally have the instance rotation, scale and
+// mirror applied, but not its offset.
+struct LayOnFacePlane
+{
+    Vec3d       normal;         // outward unit normal, object coordinates
+    Vec3d       center;         // centroid of the outline, object coordinates; on the face's mean plane
+    float       area;           // mm², instance coordinates
+    Pointf3s    outline;        // convex outline in the plane frame, where the face is horizontal
+    Transform3d to_plane_frame; // rotation from instance coordinates to the plane frame
+};
+
+// Candidate faces of the object's model parts, largest first. The instance transformation
+// (without offset) is applied before measuring, so faces too small to rest on are dropped
+// by their printed size: under 5 mm², a side under 1 mm, or an inner angle under 1°.
+std::vector<LayOnFacePlane> lay_on_face_planes(const ModelObject &object, const Transform3d &instance_matrix_no_offset);
+
+// Index of the largest plane, or -1 if `planes` is empty. Of planes with the same area, such as
+// the top and bottom of a box, the one already facing down the most wins, so flat parts stay put.
+int find_largest_plane(const std::vector<LayOnFacePlane> &planes);
+
+// Index of the plane whose normal is closest to `direction` (object coordinates),
+// or -1 if `planes` is empty.
+int find_plane_by_normal(const std::vector<LayOnFacePlane> &planes, const Vec3d &direction);
+
+// Index of the plane whose face contains `point` (object coordinates) within `tolerance` mm, or -1
+// if there is none. `instance_matrix_no_offset` is the one the planes were computed with.
+int find_plane_at_point(const std::vector<LayOnFacePlane> &planes, const Transform3d &instance_matrix_no_offset,
+                        const Vec3d &point, double tolerance);
+
+// Rotates the instance so that `normal` (object coordinates) points down, the same rotation as
+// the gizmo applies, then drops the instance so its lowest point is at z = 0.
+void lay_on_face(ModelObject &object, size_t instance_idx, const Vec3d &normal);
+
+} // namespace Slic3r
diff --git a/src/libslic3r/Layer.cpp b/src/libslic3r/Layer.cpp
index 1d6c2b0703..7bdef5a4ff 100644
--- a/src/libslic3r/Layer.cpp
+++ b/src/libslic3r/Layer.cpp
@@ -153,6 +153,7 @@ bool Layer::is_perimeter_compatible(const Print& print, const PrintRegion& a, co
         && config.gap_infill_speed.get_at(print.get_extruder_id(config.outer_wall_filament_id)) == other_config.gap_infill_speed.get_at(print.get_extruder_id(config.outer_wall_filament_id))
         && config.filter_out_gap_fill.value == other_config.filter_out_gap_fill.value
 		&& config.detect_overhang_wall                   == other_config.detect_overhang_wall
+		&& config.unsupported_wall_last                  == other_config.unsupported_wall_last
 		&& config.overhang_reverse                       == other_config.overhang_reverse
 		&& config.overhang_reverse_threshold             == other_config.overhang_reverse_threshold
 		&& config.wall_direction                         == other_config.wall_direction
@@ -187,6 +188,12 @@ void Layer::make_perimeters()
 {
     BOOST_LOG_TRIVIAL(trace) << "Generating perimeters for layer " << this->id();
 
+    const auto clear_generated_extrusions = [](LayerRegion *layer_region) {
+        layer_region->perimeters.clear();
+        layer_region->fills.clear();
+        layer_region->thin_fills.clear();
+    };
+
     // keep track of regions whose perimeters we have already generated
     std::vector<unsigned char> done(m_regions.size(), false);
 
@@ -217,13 +224,11 @@ void Layer::make_perimeters()
                     if (this_region.gradient_volume_id() != other_region.gradient_volume_id())
                         continue;
                     if (is_perimeter_compatible(*m_object->print(), this_region, other_region))
-		            {
-			 			other_layerm->perimeters.clear();
-			 			other_layerm->fills.clear();
-			 			other_layerm->thin_fills.clear();
-		                layerms.push_back(other_layerm);
-		                done[it - m_regions.begin()] = true;
-		            }
+                    {
+                        clear_generated_extrusions(other_layerm);
+                        layerms.push_back(other_layerm);
+                        done[it - m_regions.begin()] = true;
+                    }
 		        }
 
 	        if (layerms.size() == 1) {  // optimization
@@ -231,6 +236,10 @@ void Layer::make_perimeters()
                 (*layerm)->make_perimeters((*layerm)->slices, {*layerm}, &(*layerm)->fill_surfaces, &(*layerm)->fill_no_overlap_expolygons);
 	            (*layerm)->fill_expolygons = to_expolygons((*layerm)->fill_surfaces.surfaces);
 	        } else {
+	            // Orca: Unlike the compatible regions above, the initiating region has not
+	            // been cleared yet and may contain paths from a previous incompatible run.
+	            clear_generated_extrusions(*layerm);
+
 	            SurfaceCollection new_slices;
 	            // Use the region with highest infill rate, as the make_perimeters() function below decides on the gap fill based on the infill existence.
 	            LayerRegion *layerm_config = layerms.front();
diff --git a/src/libslic3r/Layer.hpp b/src/libslic3r/Layer.hpp
index 8a5aa78036..9be6b86139 100644
--- a/src/libslic3r/Layer.hpp
+++ b/src/libslic3r/Layer.hpp
@@ -16,6 +16,7 @@ using LayerPtrs = std::vector<Layer*>;
 class LayerRegion;
 using LayerRegionPtrs = std::vector<LayerRegion*>;
 class PrintRegion;
+class PrintRegionConfig;
 class PrintObject;
 class Print;
 
@@ -200,6 +201,11 @@ public:
                                                                            FillAdaptive::Octree *support_fill_octree,
                                                                            FillLightning::Generator* lightning_generator) const;
     void 					make_ironing();
+    // Returns the filament id (1-based) the region is ironed with, or -1 when the
+    // region is not ironed.
+    static int              choose_ironing_extruder(const PrintRegionConfig &cfg,
+                                                    bool spiral_mode,
+                                                    bool is_topmost_layer);
     void                    make_contour_z(const sla::IndexedMesh &mesh);
 
     void                    export_region_slices_to_svg(const char *path) const;
diff --git a/src/libslic3r/Line.cpp b/src/libslic3r/Line.cpp
index c74df3aa59..94453e18f7 100644
--- a/src/libslic3r/Line.cpp
+++ b/src/libslic3r/Line.cpp
@@ -30,8 +30,8 @@ bool Line::intersection_infinite(const Line &other, Point* point) const
         return false;
     double t1 = cross2(v12, v2) / denom;
     Vec2d result = (a1 + t1 * v1);
-    if (result.x() > std::numeric_limits<coord_t>::max() || result.x() < std::numeric_limits<coord_t>::lowest() ||
-        result.y() > std::numeric_limits<coord_t>::max() || result.y() < std::numeric_limits<coord_t>::lowest()) {
+    if (result.x() > double(std::numeric_limits<coord_t>::max()) || result.x() < double(std::numeric_limits<coord_t>::lowest()) ||
+        result.y() > double(std::numeric_limits<coord_t>::max()) || result.y() < double(std::numeric_limits<coord_t>::lowest())) {
         // Intersection has at least one of the coordinates much bigger (or smaller) than coord_t maximum value (or minimum).
         // So it can not be stored into the Point without integer overflows. That could mean that input lines are parallel or near parallel.
         return false;
diff --git a/src/libslic3r/LocalesUtils.cpp b/src/libslic3r/LocalesUtils.cpp
index 308752cc62..e727b29b09 100644
--- a/src/libslic3r/LocalesUtils.cpp
+++ b/src/libslic3r/LocalesUtils.cpp
@@ -3,6 +3,8 @@
 #ifdef _WIN32
     #include <charconv>
 #endif
+#include <iomanip>
+#include <sstream>
 #include <stdexcept>
 
 #include <fast_float/fast_float.h>
diff --git a/src/libslic3r/MinimumSpanningTree.cpp b/src/libslic3r/MinimumSpanningTree.cpp
index ff8fe6e5dd..88555e70ee 100644
--- a/src/libslic3r/MinimumSpanningTree.cpp
+++ b/src/libslic3r/MinimumSpanningTree.cpp
@@ -60,10 +60,15 @@ auto MinimumSpanningTree::prim(std::vector<Point> vertices) const -> AdjacencyGr
         //This search is O(V) right now, which can be made down to O(log(V)). This reduces the overall time complexity from O(V*V) to O(V*log(E)).
         //However that requires an implementation of a heap that supports the decreaseKey operation, which is not in the std library.
         //TODO: Implement this?
+        // Break equal-distance ties on coordinates: the map is keyed by address, so its
+        // iteration order (and therefore the first minimum) would otherwise depend on where
+        // the vertices were allocated.
         using MapValue = std::pair<const Point*, coordf_t>;
         const auto closest = std::min_element(smallest_distance.begin(), smallest_distance.end(),
                                               [](const MapValue& a, const MapValue& b) {
-                                                  return a.second < b.second;
+                                                  if (a.second != b.second)
+                                                      return a.second < b.second;
+                                                  return *a.first < *b.first;
                                               });
 
         //Add this point to the graph and remove it from the candidates.
diff --git a/src/libslic3r/Model.cpp b/src/libslic3r/Model.cpp
index cf6d76abee..209ccdafa2 100644
--- a/src/libslic3r/Model.cpp
+++ b/src/libslic3r/Model.cpp
@@ -3601,6 +3601,15 @@ void FacetsAnnotation::shift_states_above(const ModelVolume &mv, EnforcerBlocker
     this->set(selector);
 }
 
+void FacetsAnnotation::remap_states(const ModelVolume &mv, const EnforcerBlockerStateMap &state_map)
+{
+    if (empty()) return;
+    TriangleSelector selector(mv.mesh());
+    selector.deserialize(m_data, false);
+    selector.remap_triangle_state(state_map);
+    this->set(selector);
+}
+
 void FacetsAnnotation::set_enforcer_block_type_limit(const ModelVolume  &mv,
                                                      EnforcerBlockerType max_type,
                                                      EnforcerBlockerType to_delete_filament,
@@ -3865,6 +3874,43 @@ bool model_has_advanced_features(const Model &model)
     return false;
 }
 
+void remap_model_filament_slots(Model &model, const std::map<int, int> &slot_relocations)
+{
+    if (slot_relocations.empty())
+        return;
+
+    // Paint states and the object/volume "extruder" configs store one-based slot numbers
+    // (see Sidebar::on_action_add_filament's insertion remap for the same encoding).
+    std::map<int, int> one_based_slots;
+    for (const auto &[from, to] : slot_relocations)
+        one_based_slots.emplace(from + 1, to + 1);
+
+    EnforcerBlockerStateMap paint_state_map;
+    for (size_t state = 0; state < paint_state_map.size(); ++state)
+        paint_state_map[state] = EnforcerBlockerType(state);
+    for (const auto &[one_based_from, one_based_to] : one_based_slots) {
+        assert(one_based_from >= 0 && size_t(one_based_from) < paint_state_map.size());
+        assert(one_based_to > 0 && size_t(one_based_to) < paint_state_map.size());
+        paint_state_map[size_t(one_based_from)] = EnforcerBlockerType(one_based_to);
+    }
+
+    auto remap_extruder_config = [&one_based_slots](ModelConfig &config) -> bool {
+        const auto it = config.has("extruder") ? one_based_slots.find(config.extruder()) : one_based_slots.end();
+        if (it == one_based_slots.end())
+            return false;
+        config.set("extruder", it->second);
+        return true;
+    };
+
+    for (ModelObject *object : model.objects) {
+        remap_extruder_config(object->config);
+        for (ModelVolume *volume : object->volumes) {
+            remap_extruder_config(volume->config);
+            volume->mmu_segmentation_facets.remap_states(*volume, paint_state_map);
+        }
+    }
+}
+
 #ifndef NDEBUG
 // Verify whether the IDs of Model / ModelObject / ModelVolume / ModelInstance / ModelMaterial are valid and unique.
 void check_model_ids_validity(const Model &model)
diff --git a/src/libslic3r/Model.hpp b/src/libslic3r/Model.hpp
index 42b9a0b900..815b93c362 100644
--- a/src/libslic3r/Model.hpp
+++ b/src/libslic3r/Model.hpp
@@ -745,6 +745,10 @@ public:
     // Shift painted filament indices >= threshold by delta. Used when a physical filament is
     // inserted ahead of existing slots (mixed-color slots are kept at the end of the list).
     void                 shift_states_above(const ModelVolume &mv, EnforcerBlockerType threshold, int delta);
+    // Relabel painted filament indices according to state_map (old state value -> new state
+    // value; untouched states keep their identity). Used when published-3MF import relocates
+    // mixed-filament definitions onto new slot numbers.
+    void                 remap_states(const ModelVolume &mv, const EnforcerBlockerStateMap &state_map);
     indexed_triangle_set get_facets_strict(const ModelVolume& mv, EnforcerBlockerType type) const;
     bool has_facets(const ModelVolume& mv, EnforcerBlockerType type) const;
     bool empty() const { return m_data.triangles_to_split.empty(); }
@@ -1794,6 +1798,13 @@ bool model_has_multi_part_objects(const Model &model);
 // If the model has advanced features, then it cannot be processed in simple mode.
 bool model_has_advanced_features(const Model &model);
 
+// Remap the model's filament-slot references after a published-3MF import relocated
+// mixed-filament definitions onto new slot numbers: object/volume "extruder" configs and
+// multi-material color-painting states (paint state stores the one-based slot number).
+// slot_relocations maps the author's zero-based slot number to its final zero-based slot;
+// entries are applied simultaneously (no chained lookups), untouched slots keep everything.
+void remap_model_filament_slots(Model &model, const std::map<int, int> &slot_relocations);
+
 #ifndef NDEBUG
 // Verify whether the IDs of Model / ModelObject / ModelVolume / ModelInstance / ModelMaterial are valid and unique.
 void check_model_ids_validity(const Model &model);
diff --git a/src/libslic3r/ObjectID.hpp b/src/libslic3r/ObjectID.hpp
index f2697b74f5..56042bbaa3 100644
--- a/src/libslic3r/ObjectID.hpp
+++ b/src/libslic3r/ObjectID.hpp
@@ -170,6 +170,10 @@ public:
         this->m_check_sum      = rhs.check_sum();
         this->m_connectors_cnt = rhs.connectors_cnt();
     }
+    // A user-declared copy assignment or destructor deprecates the implicitly generated
+    // copy constructor, and this class has both, so declare it rather than rely on it.
+    CutObjectBase(const CutObjectBase &) = default;
+
     CutObjectBase &operator=(const CutObjectBase &other)
     {
         this->copy(other);
diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp
index a6b38889a5..9f6ec856ba 100644
--- a/src/libslic3r/PerimeterGenerator.cpp
+++ b/src/libslic3r/PerimeterGenerator.cpp
@@ -550,6 +550,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
         if (!paths.empty()) {
             if (extrusion->is_closed) {
                 ExtrusionLoop extrusion_loop(std::move(paths), pg_extrusion.is_contour ? elrDefault : elrHole);
+                extrusion_loop.inset_idx = extrusion->inset_idx;
                 if ((perimeter_generator.config->wall_direction == WallDirection::CounterClockwise) ==
                     (pg_extrusion.is_contour || pg_extrusions.size() == 2))
                     extrusion_loop.make_counter_clockwise();
@@ -1318,6 +1319,73 @@ static void reorient_perimeters(ExtrusionEntityCollection &entities, bool steep_
     }
 }
 
+// A loop made of nothing but overhang paths lies entirely off the lower layer.
+static bool is_unsupported_loop(const ExtrusionEntity *entity)
+{
+    if (!entity->is_loop())
+        return false;
+    const ExtrusionPaths &paths = static_cast<const ExtrusionLoop *>(entity)->paths;
+    return !paths.empty() && std::all_of(paths.begin(), paths.end(),
+                                         [](const ExtrusionPath &path) { return path.role() == erOverhangPerimeter; });
+}
+
+// ORCA: A wall loop with nothing under it has nothing to lean on, so whatever the configured wall
+// sequence it is extruded after the loops that anchor it, innermost first. A loop that runs alongside
+// an anchored one belongs to the same wall stack and keeps its place ahead of the infill, which needs
+// it as an anchor; one that touches nothing has only that infill to rest on, so it is flagged for the
+// G-code writer to hold it back until the infill is down.
+static void defer_unsupported_loops(const PerimeterGenerator &perimeter_generator, ExtrusionEntityCollection &entities)
+{
+    if (!perimeter_generator.config->unsupported_wall_last)
+        return;
+
+    ExtrusionEntitiesPtr &src = entities.entities;
+    auto first_deferred = std::stable_partition(src.begin(), src.end(),
+                                                [](const ExtrusionEntity *entity) { return !is_unsupported_loop(entity); });
+    if (first_deferred == src.end())
+        return;
+
+    std::stable_sort(first_deferred, src.end(),
+                     [](const ExtrusionEntity *lhs, const ExtrusionEntity *rhs) { return lhs->inset_idx > rhs->inset_idx; });
+
+    auto collect_lines = [](const ExtrusionEntity *entity, Lines &out) {
+        Polylines polylines;
+        entity->collect_polylines(polylines);
+        append(out, to_lines(polylines));
+    };
+
+    Lines anchored;
+    for (auto it = src.begin(); it != first_deferred; ++it)
+        collect_lines(*it, anchored);
+
+    std::vector<ExtrusionLoop *> unattached;
+    for (auto it = first_deferred; it != src.end(); ++it)
+        unattached.emplace_back(static_cast<ExtrusionLoop *>(*it));
+
+    // A loop leaning on a loop that is itself anchored is anchored as well, so spread outwards from
+    // the anchored loops until no unsupported loop is left touching what was reached.
+    const double touch_distance = 1.5 * std::max(perimeter_generator.ext_perimeter_flow.scaled_spacing(),
+                                                 perimeter_generator.perimeter_flow.scaled_spacing());
+    while (!anchored.empty()) {
+        AABBTreeLines::LinesDistancer<Line> distancer{std::move(anchored)};
+        anchored.clear();
+        for (ExtrusionLoop *&loop : unattached) {
+            if (loop == nullptr)
+                continue;
+            const Points points = loop->as_polyline().points;
+            if (std::any_of(points.begin(), points.end(),
+                            [&distancer, touch_distance](const Point &point) { return distancer.distance_from_lines<false>(point) < touch_distance; })) {
+                collect_lines(loop, anchored);
+                loop = nullptr;
+            }
+        }
+    }
+
+    for (ExtrusionLoop *loop : unattached)
+        if (loop != nullptr)
+            loop->print_after_infill = true;
+}
+
 void PerimeterGenerator::process_classic()
 {
     group_region_by_fuzzify(*this);
@@ -1804,6 +1872,8 @@ void PerimeterGenerator::process_classic()
                 }
             }
             
+            defer_unsupported_loops(*this, entities);
+
             // append perimeters for this slice as a collection
             if (! entities.empty())
                 this->loops->append(entities);
@@ -2742,6 +2812,7 @@ void PerimeterGenerator::process_arachne()
                 reorient_perimeters(extrusion_coll, steep_overhang_contour, steep_overhang_hole,
                                     this->config->overhang_reverse_internal_only);
             }
+            defer_unsupported_loops(*this, extrusion_coll);
             this->loops->append(extrusion_coll);
         }
 
diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 279ad49d92..1002f5be89 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -545,7 +545,7 @@ std::string generate_preset_setting_id(const std::string& vendor, const std::str
         return "";
 
     // Dedicated namespace for preset setting_ids, distinct from the cloud per-user
-    // namespace (OrcaCloudServiceAgent). Keep in sync with scripts/orca_id_tool.py;
+    // namespace (OrcaCloudServiceAgent). Keep in sync with scripts/orca_profile_tool.py;
     // never change this constant.
     static const boost::uuids::uuid vendor_namespace =
         boost::uuids::string_generator()("c1f4d9e2-7a3b-5c8d-9e0f-1a2b3c4d5e6f");
@@ -867,6 +867,20 @@ bool is_compatible_with_printer(const PresetWithVendorProfile &preset, const Pre
     return is_compatible_with_printer(preset, active_printer, &config);
 }
 
+// ORCA: see the header. The CLI resolves --load-settings into bare DynamicPrintConfigs and has no
+// Preset objects to hand; without this it would have to reimplement the policy or build the shells
+// at every call site.
+bool is_compatible_with_printer(const DynamicPrintConfig &preset_config, Preset::Type preset_type,
+                                const DynamicPrintConfig &printer_config, const std::string &printer_name)
+{
+    Preset preset(preset_type, std::string("__compat_check"));
+    preset.config = preset_config;
+    Preset printer(Preset::TYPE_PRINTER, printer_name);
+    printer.config = printer_config;
+    return is_compatible_with_printer(PresetWithVendorProfile(preset, nullptr),
+                                      PresetWithVendorProfile(printer, nullptr));
+}
+
 void Preset::set_visible_from_appconfig(const AppConfig &app_config)
 {
     //BBS: add config related log
@@ -1044,6 +1058,7 @@ static std::vector<std::string> s_Preset_print_options{
     "reduce_crossing_wall",
     "detect_thin_wall",
     "detect_overhang_wall",
+    "unsupported_wall_last",
     "overhang_reverse",
     "overhang_reverse_threshold",
     "overhang_reverse_internal_only",
@@ -1268,6 +1283,8 @@ static std::vector<std::string> s_Preset_print_options{
     "accel_to_decel_enable",
     "accel_to_decel_factor",
     "wipe_on_loops",
+    "wipe_inward",
+    "wipe_inward_distance",
     "wipe_before_external_loop",
     "bridge_density",
     "internal_bridge_density",
@@ -1304,6 +1321,8 @@ static std::vector<std::string> s_Preset_print_options{
     "wipe_tower_extra_flow",
     "single_extruder_multi_material_priming",
     "toolchange_ordering",
+    "toolchange_cyclic_order",
+    "toolchange_cyclic_first_layer",
     "wipe_tower_rotation_angle",
     "tree_support_branch_distance_organic",
     "tree_support_branch_diameter_organic",
@@ -1429,7 +1448,7 @@ static std::vector<std::string> s_Preset_printer_options {
      "gcode_skip_config_block", "fan_kickstart", "part_cooling_fan_min_pwm", "fan_speedup_time", "fan_speedup_overhangs",
     "single_extruder_multi_material", "manual_filament_change", "file_start_gcode", "machine_start_gcode", "machine_end_gcode", "before_layer_change_gcode", "printing_by_object_gcode", "layer_change_gcode", "time_lapse_gcode", "wrapping_detection_gcode", "change_filament_gcode", "change_extrusion_role_gcode",
     "printer_model", "printer_variant", "printer_extruder_id", "printer_extruder_variant", "extruder_variant_list", "default_nozzle_volume_type",
-    "printable_height", "extruder_printable_height", "extruder_clearance_radius", "extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod",
+    "printable_height", "extruder_printable_height", "extruder_clearance_radius", "extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod", "extruder_clearance_dist_to_rod",
     "nozzle_height", "master_extruder_id",
     "default_print_profile", "inherits",
     "silent_mode",
@@ -3062,6 +3081,75 @@ void PresetCollection::save_current_preset(const std::string &new_name, bool det
         this->get_selected_preset().save(nullptr);
 }
 
+// A detached standalone preset for the Full Publish receiver: create a user preset holding
+// the full resolved filament config (no inheritance, no vendor/alias links), parentless.
+// Note: universal printer compatibility is not enforced here - callers apply
+// make_publish_universal() to the config before handing it over when they need it.
+// Mirrors save_current_preset(detach=true)'s creation branch but does not force-select or
+// diff against a parent; the caller decides whether to select it.
+// The published entry's filament_id is forwarded so user bases keep their stable
+// material grouping (get_filament_presets() groups user bases by filament_id).
+// The copy is a project-embedded preset: it lives inside the loaded project only
+// (serialized into the saved .3mf, restored by load_project_embedded_presets) and
+// never touches the user's library directory; Preset::save() early-returns for
+// embedded presets, so persistence is skipped here too.
+// Returns the final (uniquified) name; on collision "<base>" -> "<base> (Published)" ->
+// "<base> (Published 2)" ...
+std::string PresetCollection::add_detached_preset(const std::string &name_base, DynamicPrintConfig config,
+                                                  const std::string &filament_id)
+{
+    if (name_base.empty())
+        return std::string();
+    Preset stored(m_type, name_base);
+    stored.config = std::move(config);
+    stored.filament_id = filament_id;
+
+    // Uniquify verbatim; only on collision append " (Published)" then " (Published 2)".
+    const std::string base_name = name_base;
+    std::string       final_name = base_name;
+    auto exists = [this](const std::string &candidate) -> bool {
+        const auto it = this->find_preset_internal(candidate);
+        return it != m_presets.end() && it->name == candidate;
+    };
+    if (exists(final_name)) {
+        final_name = base_name + " (Published)";
+        for (int i = 2; exists(final_name); ++i)
+            final_name = base_name + " (Published " + std::to_string(i) + ")";
+    }
+
+    // Creation branch of save_current_preset(detach=true), without its selection side
+    // effects or project-embedded path.
+    lock();
+    const auto it = this->find_preset_internal(final_name);
+    if (m_presets.begin() + m_idx_selected >= it)
+        ++m_idx_selected;
+    Preset &preset = *m_presets.insert(it, stored);
+    preset.name = final_name;
+    preset.vendor = nullptr;
+    preset.alias.clear();
+    preset.renamed_from.clear();
+    preset.m_excluded_from.clear();
+    preset.setting_id.clear();
+    preset.inherits().clear();
+    preset.version = Semver::parse(SoftFever_VERSION).value_or(Semver());
+    preset.is_default  = false;
+    preset.is_system   = false;
+    preset.is_external = false;
+    preset.bundle_id.clear();
+    preset.file                = this->path_for_preset(preset);
+    preset.is_visible          = true;
+    preset.is_project_embedded = true;
+    if (m_type == Preset::TYPE_PRINT)
+        preset.config.option<ConfigOptionString>("print_settings_id", true)->value = final_name;
+    else if (m_type == Preset::TYPE_FILAMENT)
+        preset.config.option<ConfigOptionStrings>("filament_settings_id", true)->values[0] = final_name;
+    else if (m_type == Preset::TYPE_PRINTER)
+        preset.config.option<ConfigOptionString>("printer_settings_id", true)->value = final_name;
+    unlock();
+
+    return final_name;
+}
+
 bool PresetCollection::delete_current_preset()
 {
     Preset &selected = this->get_selected_preset();
diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp
index 6a7871d07d..c66518e29d 100644
--- a/src/libslic3r/Preset.hpp
+++ b/src/libslic3r/Preset.hpp
@@ -93,8 +93,8 @@ class PresetBundle;
 
 // Deterministic preset setting_id: uuid5(vendor/type/name) -> 16 base62 chars.
 // Pure function of a system preset's identity, so the value can be assigned by
-// scripts/orca_id_tool.py and recomputed here when a profile ships without it.
-// MUST stay byte-identical to scripts/orca_id_tool.py.
+// scripts/orca_profile_tool.py and recomputed here when a profile ships without it.
+// MUST stay byte-identical to scripts/orca_profile_tool.py.
 // This is NOT the per-user cloud-sync setting_id
 // (OrcaCloudServiceAgent::generate_uuid_for_setting_id) - do not conflate them.
 std::string generate_preset_setting_id(const std::string& vendor,
@@ -459,6 +459,11 @@ protected:
 bool is_compatible_with_print  (const PresetWithVendorProfile &preset, const PresetWithVendorProfile &active_print, const PresetWithVendorProfile &active_printer);
 bool is_compatible_with_printer(const PresetWithVendorProfile &preset, const PresetWithVendorProfile &active_printer, const DynamicPrintConfig *extra_config);
 bool is_compatible_with_printer(const PresetWithVendorProfile &preset, const PresetWithVendorProfile &active_printer);
+// ORCA: same check for callers that hold raw configs rather than Presets (the CLI). Wraps them in
+// throwaway Preset shells and delegates, so the compatibility policy -- including the fail-open on a
+// malformed compatible_printers_condition -- lives in one place for the GUI and the CLI alike.
+bool is_compatible_with_printer(const DynamicPrintConfig &preset_config, Preset::Type preset_type,
+                                const DynamicPrintConfig &printer_config, const std::string &printer_name);
 
 // Where a preset is being loaded from. `Auto` lets load_presets() infer from the directory path.
 struct PresetOrigin {
@@ -631,6 +636,22 @@ public:
     // All presets are marked as not modified and the new preset is activated.
     //BBS: add project embedded preset logic
     void            save_current_preset(const std::string &new_name, bool detach = false, bool save_to_project = false, Preset* _curr_preset = nullptr);
+    // Insert a standalone user preset holding the full resolved config (no inheritance,
+    // no vendor links): the libslic3r equivalent of "Detach from parent". Takes a
+    // resolved config, clears parent/vendor/alias metadata, stamps filament_settings_id.
+    // Unlike save_current_preset it does not force-select or diff against a parent.
+    // Used by the published-3MF Full Publish path. The optional filament_id seeds the
+    // preset's stable material grouping (get_filament_presets groups user bases by
+    // filament_id); the published entry's filament_id is forwarded so the copy keeps
+    // the author's grouping.
+    // The copy is a project-embedded preset ("Preset Inside Project"): it lives inside
+    // the loaded project only, is serialized into the saved .3mf via
+    // get_current_project_embedded_presets(), and is never written to the user's
+    // library directory.
+    // Returns the final (uniquified) name; on collision the suffix rule is:
+    // "<base>" -> "<base> (Published)" -> "<base> (Published 2)" ...
+    std::string     add_detached_preset(const std::string &name_base, DynamicPrintConfig config,
+                                        const std::string &filament_id = std::string());
 
     // Delete the current preset, activate the first visible preset.
     // returns true if the preset was deleted successfully.
diff --git a/src/libslic3r/PresetBundle.cpp b/src/libslic3r/PresetBundle.cpp
index 6d4e77837a..dc731b63c4 100644
--- a/src/libslic3r/PresetBundle.cpp
+++ b/src/libslic3r/PresetBundle.cpp
@@ -7,16 +7,18 @@
 
 #include "PresetCacheFormat.hpp"
 #include "PrintConfig.hpp"
+#include "PublishSettings.hpp"
 #include "FilamentMixer.hpp"
 #include "libslic3r.h"
 #include "I18N.hpp"
 #include "Utils.hpp"
 #include "LocalesUtils.hpp"
 #include "Model.hpp"
+#include "TriangleSelector.hpp"
 #include "libslic3r_version.h"
 
 #include <algorithm>
-#include <mutex>
+#include <cstdlib>
 #include <set>
 #include <fstream>
 #include <unordered_set>
@@ -45,6 +47,10 @@
 
 namespace Slic3r {
 
+// Project-level options imported from a loaded 3MF into project_config. s_project_options_published
+// below is the reduced subset that crosses over in "published" 3MF mode; keep both in sync.
+// s_project_options_published additionally carries wipe_tower_rotation_angle, which normal
+// loads do not import (it is not listed here): published-only plate geometry.
 static std::vector<std::string> s_project_options {
     "flush_volumes_vector",
     "flush_volumes_matrix",
@@ -85,6 +91,21 @@ static std::vector<std::string> s_project_options {
     "filament_mixed_gradient_per_part"
 };
 
+// Project options applied when loading a "published" 3MF project: s_project_options minus the
+// filament/purge keys, plus wipe_tower_rotation_angle (plate geometry that only published
+// loads import today). A published file must not port the author's filament data
+// (colors, colour types, filament/map/AMS slot state, purge/prime/flush volumes, nozzle
+// volume types, filament switcher state) to the receiver's project_config, which feeds the
+// scene colors, AMS slot colors and purge data. Only the plate/bed geometry keys cross over;
+// normal (non-published) 3MF loads keep importing the author's flush data via s_project_options.
+//
+// KEEP IN SYNC with s_project_options above: when a new project option is added there, decide
+// here whether it is plate/bed geometry (add it to this list) or filament/purge/mapping/device
+// state (it must NOT be added). curr_bed_type is deliberately NOT in this list: the receiver
+// keeps its own bed type when loading a published project. The published-mode project_config
+// assertions in tests/libslic3r/test_preset_bundle_loading.cpp guard both directions.
+static std::vector<std::string> s_project_options_published{"wipe_tower_x", "wipe_tower_y", "wipe_tower_rotation_angle"};
+
 //Orca: add custom as default
 const char *PresetBundle::ORCA_DEFAULT_BUNDLE = "Custom";
 const char *PresetBundle::ORCA_DEFAULT_PRINTER_MODEL = "MyKlipper 0.4 nozzle";
@@ -463,7 +484,7 @@ bool PresetBundle::resolve_preset_config(DynamicPrintConfig &config, Preset::Typ
     else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
         compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;
 
-    auto collection_for_type = [](PresetBundle &bundle, Preset::Type preset_type) -> PresetCollection * {
+    auto collection_for_type = [](const PresetBundle &bundle, Preset::Type preset_type) -> const PresetCollection * {
         switch (preset_type) {
         case Preset::TYPE_PRINT:    return &bundle.prints;
         case Preset::TYPE_FILAMENT: return &bundle.filaments;
@@ -472,15 +493,15 @@ bool PresetBundle::resolve_preset_config(DynamicPrintConfig &config, Preset::Typ
         }
     };
 
-    PresetCollection *collection = collection_for_type(*this, type);
+    const PresetCollection *collection = collection_for_type(*this, type);
     if (collection == nullptr) {
         error = "Unsupported preset type";
         return false;
     }
 
     const boost::filesystem::path source_path = boost::filesystem::absolute(source_file).lexically_normal();
-    auto find_loaded = [&](PresetBundle &bundle) -> const Preset * {
-        PresetCollection *loaded_collection = collection_for_type(bundle, type);
+    auto find_loaded = [&](const PresetBundle &bundle) -> const Preset * {
+        const PresetCollection *loaded_collection = collection_for_type(bundle, type);
         const Preset *resolved = nullptr;
         for (const Preset &preset : loaded_collection->get_presets()) {
             if (preset.file.empty())
@@ -528,30 +549,11 @@ bool PresetBundle::resolve_preset_config(DynamicPrintConfig &config, Preset::Typ
             continue;
 
         try {
-            PresetBundle library_bundle;
-            const PresetBundle *base_bundle = nullptr;
-            if (vendor_id != ORCA_FILAMENT_LIBRARY &&
-                boost::filesystem::is_regular_file(root_dir / (std::string(ORCA_FILAMENT_LIBRARY) + ".json"))) {
-                library_bundle.m_preserve_vendor_source_paths = true;
-                library_bundle.load_vendor_configs_from_json(root_dir.string(), ORCA_FILAMENT_LIBRARY, LoadSystem,
-                                                             compatibility_rule, nullptr, false);
-                if (library_bundle.error_count() != 0) {
-                    error = "OrcaFilamentLibrary contains invalid presets";
-                    return false;
-                }
-                base_bundle = &library_bundle;
-            }
-
-            PresetBundle source_bundle;
-            source_bundle.m_preserve_vendor_source_paths = true;
-            source_bundle.load_vendor_configs_from_json(root_dir.string(), vendor_id, LoadSystem,
-                                                        compatibility_rule, base_bundle, false);
-            if (source_bundle.error_count() != 0) {
-                error = "Vendor bundle contains invalid presets";
+            const PresetBundle *loaded = load_source_vendor(root_dir, vendor_id, compatibility_rule, error);
+            if (loaded == nullptr)
                 return false;
-            }
 
-            const Preset *resolved = find_loaded(source_bundle);
+            const Preset *resolved = find_loaded(*loaded);
             if (resolved == nullptr) {
                 if (error.empty())
                     error = "Source file is not an instantiated preset in its vendor manifest";
@@ -570,6 +572,37 @@ bool PresetBundle::resolve_preset_config(DynamicPrintConfig &config, Preset::Typ
     return false;
 }
 
+const PresetBundle *PresetBundle::load_source_vendor(const boost::filesystem::path &root_dir,
+                                                    const std::string &vendor_id,
+                                                    ForwardCompatibilitySubstitutionRule compatibility_rule,
+                                                    std::string &error)
+{
+    auto key = std::make_tuple(root_dir.string(), vendor_id, compatibility_rule);
+    if (auto it = m_source_vendor_bundles.find(key); it != m_source_vendor_bundles.end())
+        return it->second.get();
+
+    // The library loads with no base of its own, so the tree a vendor inherits from
+    // is the same one that resolves the library's own presets.
+    const PresetBundle *library = nullptr;
+    if (vendor_id != ORCA_FILAMENT_LIBRARY &&
+        boost::filesystem::is_regular_file(root_dir / (std::string(ORCA_FILAMENT_LIBRARY) + ".json"))) {
+        library = load_source_vendor(root_dir, ORCA_FILAMENT_LIBRARY, compatibility_rule, error);
+        if (library == nullptr) {
+            error = "OrcaFilamentLibrary contains invalid presets";
+            return nullptr;
+        }
+    }
+
+    auto bundle = std::make_unique<PresetBundle>();
+    bundle->m_preserve_vendor_source_paths = true;
+    bundle->load_vendor_configs_from_json(root_dir.string(), vendor_id, LoadSystem, compatibility_rule, library, false);
+    if (bundle->error_count() != 0) {
+        error = "Vendor bundle contains invalid presets";
+        return nullptr;
+    }
+    return m_source_vendor_bundles.emplace(std::move(key), std::move(bundle)).first->second.get();
+}
+
 bool PresetBundle::resolve_preset_config_type(DynamicPrintConfig &config, Preset::Type &type,
                                               const std::string &source_file,
                                               ForwardCompatibilitySubstitutionRule compatibility_rule,
@@ -1614,6 +1647,12 @@ PresetsConfigSubstitutions PresetBundle::import_presets(std::vector<std::string>
                 metadata.id = to_string(uuid);
                 BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " bundle_id was empty, so generating a UUID: " << metadata.id;
             }
+            if (has_bundle_structure && !is_path_within_root(metadata.id, user_folder / user_id / PRESET_LOCAL_DIR)) {
+                BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " bundle id escapes the bundle directory, not importing: " << metadata.id;
+                fclose(zipFile);
+                fs::remove_all(temp_folder, ec);
+                continue;
+            }
 
             // Build bundle directory path based on whether bundle_structure.json was present
             fs::path bundle_base_dir;
@@ -1636,11 +1675,15 @@ PresetsConfigSubstitutions PresetBundle::import_presets(std::vector<std::string>
                 if (status) {
                     std::string file_name = file_stat.m_filename;
                     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " From zip file: " << file << ". Read file name: " << file_stat.m_filename;
-                    size_t index = file_name.find_last_of('/');
+                    size_t index = file_name.find_last_of("/\\");
                     if (std::string::npos != index) {
                         file_name = file_name.substr(index + 1);
                     }
                     if (BUNDLE_STRUCTURE_JSON_NAME == file_name) continue;
+                    if (!is_path_within_root(file_name, temp_folder)) {
+                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " zip entry escapes the temp directory, skipping: " << file_stat.m_filename;
+                        continue;
+                    }
                     // create target file path
                     std::string target_file_path = boost::filesystem::path(temp_folder / file_name).make_preferred().string();
 
@@ -1729,6 +1772,10 @@ bool PresetBundle::import_json_presets(PresetsConfigSubstitutions &            s
             BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset type is unknown, not loading: " << name;
             return false;
         }
+        if (!is_path_within_root(name, fs::path(collection->m_dir_path))) {
+            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset name escapes the preset directory, not loading: " << name;
+            return false;
+        }
         const PresetOrigin load_origin = detect_origin_from_path(boost::filesystem::path(bundle_dir));
         const std::string      preset_name = get_preset_canonical_name(name, load_origin);
 
@@ -4926,6 +4973,142 @@ static std::map<std::string, std::map<std::string, std::string>> filament_preset
                               {"Bambu ASA @BBL H2D 0.6 nozzle", "Bambu ASA @BBL H2D 0.8 nozzle"}}}
 };
 
+// Relocate the per-slot cells of one mixed-filament project vector inside the imported
+// config, applying every authored-slot -> destination move at once. Each move reads its
+// source cell from a frozen snapshot of the config's current cells, so relocations never
+// cross-contaminate when an earlier destination overlaps a later source (adjacent published
+// tail mixes relocate onto consecutive slots). Cells the snapshot lacks degrade to
+// empty/false defaults - the missing-data handling in the material pass reports them
+// downstream. Left-behind source cells stay as-is: nothing else consumes the imported config
+// at those indices in published mode.
+static void apply_mixed_config_relocations(DynamicPrintConfig&                            config,
+                                           const std::string&                             key,
+                                           const std::vector<std::pair<size_t, size_t>>&  moves)
+{
+    ConfigOption* opt = config.optptr(key);
+    if (opt == nullptr || moves.empty())
+        return;
+    std::unique_ptr<ConfigOption> snapshot(opt->clone());
+    switch (opt->type()) {
+    case coBools: {
+        auto*       live   = static_cast<ConfigOptionBools*>(opt);
+        const auto* frozen = static_cast<const ConfigOptionBools*>(snapshot.get());
+        for (const auto& [from, to] : moves) {
+            const unsigned char cell = from < frozen->values.size() ? frozen->values[from] : 0;
+            if (live->values.size() <= to)
+                live->values.resize(to + 1, 0);
+            live->values[to] = cell;
+        }
+        break;
+    }
+    case coStrings: {
+        auto*       live   = static_cast<ConfigOptionStrings*>(opt);
+        const auto* frozen = static_cast<const ConfigOptionStrings*>(snapshot.get());
+        for (const auto& [from, to] : moves) {
+            const std::string cell = from < frozen->values.size() ? frozen->values[from] : std::string();
+            if (live->values.size() <= to)
+                live->values.resize(to + 1, std::string{});
+            live->values[to] = cell;
+        }
+        break;
+    }
+    default: break;
+    }
+}
+
+// Relocate the per-slot cells of the receiver's OWN mixed-filament definitions (the ones that
+// pre-existed in project_config) onto fresh tail slots, clearing each vacated source cell so an
+// incoming published real filament can claim it. Unlike apply_mixed_config_relocations - which
+// moves the incoming file's config and leaves sources alone - a displaced receiver mix must not
+// keep its mixed flag in the physical region: the source slot becomes a physical slot, so its
+// mixed flag and definition are reset, while its swatch colour and mapping travel with the
+// definition to the tail slot. Reads come from a frozen snapshot so an earlier move's
+// destination never overwrites a later move's still-unread source (sources sit in the physical
+// region and destinations past it, so they cannot overlap, but the snapshot keeps the helper
+// safe for any future reordering).
+static void apply_receiver_mix_relocations(DynamicPrintConfig&                            config,
+                                           std::vector<std::vector<std::string>>&          ams_multi_color_filment,
+                                           const std::vector<std::pair<size_t, size_t>>&  moves)
+{
+    if (moves.empty())
+        return;
+
+    auto move_bools  = [&](const char* key, bool clear_source) {
+        ConfigOption* opt = config.optptr(key);
+        if (opt == nullptr)
+            return;
+        auto*             live   = static_cast<ConfigOptionBools*>(opt);
+        std::unique_ptr<ConfigOption> snapshot(opt->clone());
+        const auto*       frozen  = static_cast<const ConfigOptionBools*>(snapshot.get());
+        for (const auto& [from, to] : moves) {
+            const bool cell = from < frozen->values.size() ? frozen->values[from] : false;
+            if (live->values.size() <= to)
+                live->values.resize(to + 1, false);
+            live->values[to] = cell;
+            if (clear_source && from < live->values.size())
+                live->values[from] = false;
+        }
+    };
+    auto move_strings = [&](const char* key, bool clear_source) {
+        ConfigOption* opt = config.optptr(key);
+        if (opt == nullptr)
+            return;
+        auto*             live   = static_cast<ConfigOptionStrings*>(opt);
+        std::unique_ptr<ConfigOption> snapshot(opt->clone());
+        const auto*       frozen  = static_cast<const ConfigOptionStrings*>(snapshot.get());
+        for (const auto& [from, to] : moves) {
+            const std::string cell = from < frozen->values.size() ? frozen->values[from] : std::string();
+            if (live->values.size() <= to)
+                live->values.resize(to + 1, std::string{});
+            live->values[to] = cell;
+            if (clear_source && from < live->values.size())
+                live->values[from] = std::string{};
+        }
+    };
+    auto move_ints = [&](const char* key) {
+        ConfigOption* opt = config.optptr(key);
+        if (opt == nullptr)
+            return;
+        auto*             live   = static_cast<ConfigOptionInts*>(opt);
+        std::unique_ptr<ConfigOption> snapshot(opt->clone());
+        const auto*       frozen  = static_cast<const ConfigOptionInts*>(snapshot.get());
+        for (const auto& [from, to] : moves) {
+            const int cell = from < frozen->values.size() ? frozen->values[from] : 0;
+            if (live->values.size() <= to)
+                live->values.resize(to + 1, 0);
+            live->values[to] = cell;
+        }
+    };
+
+    // Mixed-definition cells: move to the tail and clear the source - the vacated physical slot
+    // no longer holds a mix.
+    move_bools("filament_is_mixed", true);
+    move_strings("filament_mixed_components", true);
+    move_strings("filament_mixed_sublayer_ratios", true);
+    move_bools("filament_mixed_gradient", true);
+    move_strings("filament_mixed_gradient_range", true);
+    move_strings("filament_mixed_gradient_curve", true);
+    move_bools("filament_mixed_gradient_per_part", true);
+    // Swatch colour and mapping travel with the definition; the source colour is left for the
+    // incoming real's publish_color (or the slot's resolved preset) to fill in.
+    move_strings("filament_colour", false);
+    move_strings("filament_multi_colour", false);
+    move_strings("filament_colour_type", false);
+    move_ints("filament_map");
+    move_ints("filament_nozzle_map");
+    move_ints("filament_volume_map");
+    {
+        const std::vector<std::vector<std::string>> frozen = ams_multi_color_filment;
+        for (const auto& [from, to] : moves) {
+            const std::vector<std::string> cell = from < frozen.size() ? frozen[from] : std::vector<std::string>();
+            if (ams_multi_color_filment.size() <= to)
+                ams_multi_color_filment.resize(to + 1, std::vector<std::string>{});
+            ams_multi_color_filment[to] = cell;
+        }
+    }
+}
+
+
 //convert the old filament preset to new one after split
 static void convert_filament_preset_name(std::string& machine_name, std::string& filament_name)
 {
@@ -4942,10 +5125,14 @@ static void convert_filament_preset_name(std::string& machine_name, std::string&
 }
 // Load a config file from a boost property_tree. This is a private method called from load_config_file.
 // is_external == false on if called from ConfigWizard
-void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config, Semver file_version, bool selected)
+void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config, Semver file_version, bool selected, PublishedConfig *published_config)
 {
     PrinterTechnology printer_technology = Preset::printer_technology(config);
 
+    // A "published" 3MF project keeps the user's currently-selected presets and overlays only
+    // the author-selected published keys onto the edited presets.
+    const bool is_published = published_config != nullptr && published_config->published;
+
     auto clear_compatible_printers = [](DynamicPrintConfig& config){
         ConfigOption *opt_compatible = config.optptr("compatible_printers");
         if (opt_compatible != nullptr) {
@@ -5086,127 +5273,60 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool
     switch (Preset::printer_technology(config)) {
     case ptFFF:
     {
-        //BBS: add different settings logic
-        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load print preset from print_settings_id");
-        std::vector<std::string> print_different_keys_vector;
-        std::string print_different_settings = different_values[0];
-        Slic3r::unescape_strings_cstyle(print_different_settings, print_different_keys_vector);
-        std::set<std::string> print_different_keys_set(print_different_keys_vector.begin(), print_different_keys_vector.end());
-        //if (!has_different_settings_to_system) {
-        //    print_different_keys_set.clear();
-        //}
-        //else
-            print_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
-        if (!print_compatible_printers.empty()) {
-            ConfigOptionStrings* compatible_printers = config.option<ConfigOptionStrings>("compatible_printers", true);
-            compatible_printers->values = print_compatible_printers;
-        }
-
-        load_preset(this->prints, 0, "print_settings_id", print_different_keys_set, std::string());
-
-        //clear compatible printers
-        clear_compatible_printers(config);
-
-        std::vector<std::string> printer_different_keys_vector;
-        std::string printer_different_settings = different_values[num_filaments + 1];
-        Slic3r::unescape_strings_cstyle(printer_different_settings, printer_different_keys_vector);
-        std::set<std::string> printer_different_keys_set(printer_different_keys_vector.begin(), printer_different_keys_vector.end());
-        //if (!has_different_settings_to_system) {
-        //    printer_different_keys_set.clear();
-        //}
-        //else
-            printer_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
-        //BBS: add config related logs
-        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load printer preset from printer_settings_id");
-        load_preset(this->printers, num_filaments + 1, "printer_settings_id", printer_different_keys_set, std::string());
-
-        // 3) Now load the filaments. If there are multiple filament presets, split them and load them.
-        auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true);
-        old_filament_profile_names->values.resize(num_filaments, std::string());
-
-        auto old_machine_profile_name = config.option<ConfigOptionString>("printer_settings_id", true);
-
-        if (num_filaments <= 1) {
-            // Split the "compatible_printers_condition" and "inherits" values from the cummulative vectors to separate filament presets.
-            inherits                      = inherits_values[1];
-            compatible_printers_condition = compatible_printers_condition_values[1];
-			compatible_prints_condition   = compatible_prints_condition_values.front();
-			Preset                *loaded = nullptr;
-
+        // A "published" 3MF project keeps the user's currently-selected presets, so the
+        // print / printer / filament presets are NOT loaded from the file. Only the
+        // project config values and the published keys are applied below.
+        if (!is_published) {
             //BBS: add different settings logic
-            std::vector<std::string> filament_different_keys_vector;
-            std::string filament_different_settings = different_values[1];
-            Slic3r::unescape_strings_cstyle(filament_different_settings, filament_different_keys_vector);
-            std::set<std::string> filament_different_keys_set(filament_different_keys_vector.begin(), filament_different_keys_vector.end());
+            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load print preset from print_settings_id");
+            std::vector<std::string> print_different_keys_vector;
+            std::string print_different_settings = different_values[0];
+            Slic3r::unescape_strings_cstyle(print_different_settings, print_different_keys_vector);
+            std::set<std::string> print_different_keys_set(print_different_keys_vector.begin(), print_different_keys_vector.end());
             //if (!has_different_settings_to_system) {
-            //    filament_different_keys_set.clear();
+            //    print_different_keys_set.clear();
             //}
             //else
-                filament_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
+                print_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
+            if (!print_compatible_printers.empty()) {
+                ConfigOptionStrings* compatible_printers = config.option<ConfigOptionStrings>("compatible_printers", true);
+                compatible_printers->values = print_compatible_printers;
+            }
 
-            std::string filament_id = filament_ids[0];
+            load_preset(this->prints, 0, "print_settings_id", print_different_keys_set, std::string());
+
+            //clear compatible printers
+            clear_compatible_printers(config);
+
+            std::vector<std::string> printer_different_keys_vector;
+            std::string printer_different_settings = different_values[num_filaments + 1];
+            Slic3r::unescape_strings_cstyle(printer_different_settings, printer_different_keys_vector);
+            std::set<std::string> printer_different_keys_set(printer_different_keys_vector.begin(), printer_different_keys_vector.end());
+            //if (!has_different_settings_to_system) {
+            //    printer_different_keys_set.clear();
+            //}
+            //else
+                printer_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
             //BBS: add config related logs
-            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load single filament preset from filament_settings_id");
-            if (is_external) {
-                if (inherits.empty())
-                    convert_filament_preset_name(old_machine_profile_name->value, old_filament_profile_names->values.front());
-                else
-                    convert_filament_preset_name(old_machine_profile_name->value, inherits);
-                loaded = this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config, filament_different_keys_set, PresetCollection::LoadAndSelect::Always, file_version, filament_id).first;
-            }
-            else {
-                // called from Config Wizard.
-				loaded= &this->filaments.load_preset(this->filaments.path_from_name(name, inherits.empty()), name, config, true, file_version);
-				loaded->save(nullptr);
-			}
-            this->filament_presets.clear();
-			this->filament_presets.emplace_back(loaded->name);
-        } else {
-            assert(is_external);
-            // Split the filament presets, load each of them separately.
-            std::vector<DynamicPrintConfig> configs(num_filaments, this->filaments.default_preset().config);
-            // loop through options and scatter them into configs.
-            for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
-                ConfigOption *other_opt = config.option(key);
-                if (other_opt == nullptr)
-                    continue;
-                if (other_opt->is_scalar()) {
-                    for (size_t i = 0; i < configs.size(); ++ i)
-                        configs[i].option(key, false)->set(other_opt);
-                }
-                else if (key != "compatible_printers" && key != "compatible_prints") {
-                    for (size_t i = 0; i < configs.size(); ++i) {
-                        if (process_multi_extruder && (filament_options_with_variant.find(key) != filament_options_with_variant.end())) {
-                            ConfigOptionVectorBase* other_opt_vec = static_cast<ConfigOptionVectorBase*>(other_opt);
-                            if (other_opt_vec->size() != extruder_variant_count) {
-                                other_opt_vec->resize(extruder_variant_count);
-                            }
-                            size_t next_index = (i < (configs.size() - 1)) ? filament_variant_index[i + 1] : extruder_variant_count;
-                            static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set(other_opt, filament_variant_index[i], next_index - filament_variant_index[i]);
-                        }
-                        else
-                            static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i);
-                    }
-                }
-            }
-            // Load the configs into this->filaments and make them active.
-            this->filament_presets = std::vector<std::string>(configs.size());
-            // To avoid incorrect selection of the first filament preset (means a value of Preset->m_idx_selected)
-            // in a case when next added preset take a place of previosly selected preset,
-            // we should add presets from last to first
-            bool any_modified = false;
-            //BBS: add config related logs
-            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load multiple filament preset from filament_settings_id");
-            for (int i = (int)configs.size()-1; i >= 0; i--) {
-                DynamicPrintConfig &cfg = configs[i];
-                // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
-                cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1];
-                cfg.opt_string("compatible_prints_condition",   true) = compatible_prints_condition_values[i];
-                cfg.opt_string("inherits", true)                      = inherits_values[i + 1];
+            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load printer preset from printer_settings_id");
+            load_preset(this->printers, num_filaments + 1, "printer_settings_id", printer_different_keys_set, std::string());
+
+            // 3) Now load the filaments. If there are multiple filament presets, split them and load them.
+            auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true);
+            old_filament_profile_names->values.resize(num_filaments, std::string());
+
+            auto old_machine_profile_name = config.option<ConfigOptionString>("printer_settings_id", true);
+
+            if (num_filaments <= 1) {
+                // Split the "compatible_printers_condition" and "inherits" values from the cummulative vectors to separate filament presets.
+                inherits                      = inherits_values[1];
+                compatible_printers_condition = compatible_printers_condition_values[1];
+    			compatible_prints_condition   = compatible_prints_condition_values.front();
+    			Preset                *loaded = nullptr;
 
                 //BBS: add different settings logic
                 std::vector<std::string> filament_different_keys_vector;
-                std::string filament_different_settings = different_values[i+1];
+                std::string filament_different_settings = different_values[1];
                 Slic3r::unescape_strings_cstyle(filament_different_settings, filament_different_keys_vector);
                 std::set<std::string> filament_different_keys_set(filament_different_keys_vector.begin(), filament_different_keys_vector.end());
                 //if (!has_different_settings_to_system) {
@@ -5215,32 +5335,105 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool
                 //else
                     filament_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
 
-                std::string filament_id = filament_ids[i];
+                std::string filament_id = filament_ids[0];
+                //BBS: add config related logs
+                BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load single filament preset from filament_settings_id");
+                if (is_external) {
+                    if (inherits.empty())
+                        convert_filament_preset_name(old_machine_profile_name->value, old_filament_profile_names->values.front());
+                    else
+                        convert_filament_preset_name(old_machine_profile_name->value, inherits);
+                    loaded = this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config, filament_different_keys_set, PresetCollection::LoadAndSelect::Always, file_version, filament_id).first;
+                }
+                else {
+                    // called from Config Wizard.
+    				loaded= &this->filaments.load_preset(this->filaments.path_from_name(name, inherits.empty()), name, config, true, file_version);
+    				loaded->save(nullptr);
+    			}
+                this->filament_presets.clear();
+    			this->filament_presets.emplace_back(loaded->name);
+            } else {
+                assert(is_external);
+                // Split the filament presets, load each of them separately.
+                std::vector<DynamicPrintConfig> configs(num_filaments, this->filaments.default_preset().config);
+                // loop through options and scatter them into configs.
+                for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
+                    ConfigOption *other_opt = config.option(key);
+                    if (other_opt == nullptr)
+                        continue;
+                    if (other_opt->is_scalar()) {
+                        for (size_t i = 0; i < configs.size(); ++ i)
+                            configs[i].option(key, false)->set(other_opt);
+                    }
+                    else if (key != "compatible_printers" && key != "compatible_prints") {
+                        for (size_t i = 0; i < configs.size(); ++i) {
+                            if (process_multi_extruder && (filament_options_with_variant.find(key) != filament_options_with_variant.end())) {
+                                ConfigOptionVectorBase* other_opt_vec = static_cast<ConfigOptionVectorBase*>(other_opt);
+                                if (other_opt_vec->size() != extruder_variant_count) {
+                                    other_opt_vec->resize(extruder_variant_count);
+                                }
+                                size_t next_index = (i < (configs.size() - 1)) ? filament_variant_index[i + 1] : extruder_variant_count;
+                                static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set(other_opt, filament_variant_index[i], next_index - filament_variant_index[i]);
+                            }
+                            else
+                                static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i);
+                        }
+                    }
+                }
+                // Load the configs into this->filaments and make them active.
+                this->filament_presets = std::vector<std::string>(configs.size());
+                // To avoid incorrect selection of the first filament preset (means a value of Preset->m_idx_selected)
+                // in a case when next added preset take a place of previosly selected preset,
+                // we should add presets from last to first
+                bool any_modified = false;
+                //BBS: add config related logs
+                BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load multiple filament preset from filament_settings_id");
+                for (int i = (int)configs.size()-1; i >= 0; i--) {
+                    DynamicPrintConfig &cfg = configs[i];
+                    // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
+                    cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1];
+                    cfg.opt_string("compatible_prints_condition",   true) = compatible_prints_condition_values[i];
+                    cfg.opt_string("inherits", true)                      = inherits_values[i + 1];
 
-                // Load all filament presets, but only select the first one in the preset dialog.
-                std::string& filament_inherit = cfg.opt_string("inherits", true);
-                if (filament_inherit.empty() && (i < int(old_filament_profile_names->values.size())))
-                    convert_filament_preset_name(old_machine_profile_name->value, old_filament_profile_names->values[i]);
-                else
-                    convert_filament_preset_name(old_machine_profile_name->value, filament_inherit);
-                auto [loaded, modified] = this->filaments.load_external_preset(name_or_path, name,
-                    (i < int(old_filament_profile_names->values.size())) ? old_filament_profile_names->values[i] : "",
-                    std::move(cfg),
-                    filament_different_keys_set,
-                    i == 0 ?
-                        PresetCollection::LoadAndSelect::Always :
-                    any_modified ?
-                        PresetCollection::LoadAndSelect::Never :
-                        PresetCollection::LoadAndSelect::OnlyIfModified,
-                    file_version,
-                    filament_id);
-                any_modified |= modified;
-                this->filament_presets[i] = loaded->name;
+                    //BBS: add different settings logic
+                    std::vector<std::string> filament_different_keys_vector;
+                    std::string filament_different_settings = different_values[i+1];
+                    Slic3r::unescape_strings_cstyle(filament_different_settings, filament_different_keys_vector);
+                    std::set<std::string> filament_different_keys_set(filament_different_keys_vector.begin(), filament_different_keys_vector.end());
+                    //if (!has_different_settings_to_system) {
+                    //    filament_different_keys_set.clear();
+                    //}
+                    //else
+                        filament_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
+
+                    std::string filament_id = filament_ids[i];
+
+                    // Load all filament presets, but only select the first one in the preset dialog.
+                    std::string& filament_inherit = cfg.opt_string("inherits", true);
+                    if (filament_inherit.empty() && (i < int(old_filament_profile_names->values.size())))
+                        convert_filament_preset_name(old_machine_profile_name->value, old_filament_profile_names->values[i]);
+                    else
+                        convert_filament_preset_name(old_machine_profile_name->value, filament_inherit);
+                    auto [loaded, modified] = this->filaments.load_external_preset(name_or_path, name,
+                        (i < int(old_filament_profile_names->values.size())) ? old_filament_profile_names->values[i] : "",
+                        std::move(cfg),
+                        filament_different_keys_set,
+                        i == 0 ?
+                            PresetCollection::LoadAndSelect::Always :
+                        any_modified ?
+                            PresetCollection::LoadAndSelect::Never :
+                            PresetCollection::LoadAndSelect::OnlyIfModified,
+                        file_version,
+                        filament_id);
+                    any_modified |= modified;
+                    this->filament_presets[i] = loaded->name;
+                }
             }
-        }
+        } // !is_published
 
-        // 4) Load the project config values (the per extruder wipe matrix etc).
-        this->project_config.apply_only(config, s_project_options);
+        // Load the project config values. In published mode only the plate/bed geometry keys
+        // cross over (the receiver must not inherit the author's filament/purge data).
+        this->project_config.apply_only(config, is_published ? s_project_options_published : s_project_options);
 
         break;
     }
@@ -5259,18 +5452,1143 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool
 	this->update_compatible(PresetSelectCompatibleType::Never);
     this->update_multi_material_filament_presets();
 
+    // A "published" 3MF project overlays the author-selected published keys onto the user's
+    // currently-selected (edited) process preset. Keys that cannot be applied are collected for
+    // notification; filament-class keys in published_keys (which only the material pass knows
+    // how to apply) fall through into skipped_keys.
+    if (is_published) {
+        std::vector<std::string> skipped_keys;
+        std::set<std::string> applied_keys;
+        // Only re-select the edited filament preset when the material overlay changed
+        // something: re-selecting unconditionally would discard the user's unsaved in-memory
+        // filament edits when the published file touches nothing.
+        bool material_applied = false;
+        // Structural keys are never applied (they would rewrite the user's preset
+        // inheritance/structure). Defense-in-depth: a hand-crafted 3MF could list them despite
+        // the dialog, so skip them here too.
+        const std::set<std::string>& structural_keys = publish_structural_keys();
+        // The printer overlay is restricted to the publishable retraction/z-hop allowlist;
+        // printer-class keys outside it are contract-excluded (never applied, never reported).
+        const std::set<std::string>& printer_allowlist  = publishable_printer_keys();
+        const std::vector<std::string>& printer_options = Preset::printer_options();
+        const std::set<std::string> printer_option_set(printer_options.begin(), printer_options.end());
+        std::set<std::string> contract_excluded_keys;
+        auto apply_published = [&](DynamicPrintConfig& target, const std::set<std::string>* allowlist) {
+            // Single-extruder receivers collapse a base key's per-extruder "#N" variants onto
+            // their single slot: only the first serialized variant of a base key is applied
+            // (the author's "left or right" whichever came first), the rest are reported as
+            // skipped. Per-target, so the process and printer passes each track their own bases.
+            std::set<std::string> collapsed_bases;
+            for (const std::string& key : published_config->published_keys) {
+                if (applied_keys.count(key) != 0)
+                    continue; // already applied
+                // A '#' suffix denotes a variant key; resolve the base key.
+                const std::string base_key = publish_base_key(key);
+                // Structural keys are never applied (not "skipped due to mismatch"), so bail
+                // out before the applied/skipped bookkeeping.
+                if (structural_keys.count(base_key) != 0)
+                    continue;
+                if (allowlist != nullptr && printer_option_set.count(base_key) != 0 && allowlist->count(base_key) == 0) {
+                    // Printer-class key outside the publishable allowlist: contract-excluded.
+                    contract_excluded_keys.insert(base_key);
+                    continue;
+                }
+                const ConfigOption* src_opt = config.option(base_key);
+                if (src_opt == nullptr)
+                    continue; // key not present in the loaded config; record later
+                if (src_opt->is_vector()) {
+                    ConfigOption* dst_opt = target.option(base_key);
+                    if (dst_opt == nullptr || !dst_opt->is_vector())
+                        continue; // cannot apply; will be reported as skipped
+                    // Type mismatch: ConfigOptionVector::set() throws ConfigurationError on a
+                    // mismatch, which would abort the whole project load; report the key as
+                    // skipped instead (the material pass guards the same way). Note that the
+                    // nullable variants report the same type() as their non-nullable base, so
+                    // this catches genuinely different option kinds (e.g. a string where a float
+                    // vector is expected), not nullable-ness.
+                    if (dst_opt->type() != src_opt->type())
+                        continue;
+                    // A '#N' variant key (e.g. per-extruder retraction_length#2) applies one
+                    // element, so the index only needs to be in range on the author's side - the
+                    // receiver may have a different extruder count than the author. Out-of-range
+                    // indices are skipped (set_at would otherwise resize the receiver's vector).
+                    if (key.size() > base_key.size()) {
+                        // Strict numeric suffix parse: a malformed variant ("#abc", "#1x")
+                        // must be reported as skipped, not silently applied as element 0.
+                        const std::string suffix = key.substr(base_key.size() + 1);
+                        size_t idx               = 0;
+                        bool valid               = !suffix.empty();
+                        for (const char c : suffix) {
+                            if (c < '0' || c > '9') {
+                                valid = false;
+                                break;
+                            }
+                            idx = idx * 10 + size_t(c - '0');
+                            if (idx > 1000000) { // overflow guard; real vector sizes are tiny
+                                valid = false;
+                                break;
+                            }
+                        }
+                        const size_t src_size = static_cast<const ConfigOptionVectorBase*>(src_opt)->size();
+                        if (!valid || idx >= src_size)
+                            continue; // malformed or out-of-range on the author's side: cannot apply; reported as skipped
+                        const size_t dst_size = static_cast<const ConfigOptionVectorBase*>(dst_opt)->size();
+                        if (dst_size == 1) {
+                            // Single-extruder receiver: collapse the author's per-extruder slots
+                            // onto the receiver's single slot. Only the first serialized variant
+                            // of a base key is applied (the author's "left or right" whichever was
+                            // published first); later variants of the same base are reported as
+                            // skipped, mirroring the receiver's single extruder.
+                            if (collapsed_bases.count(base_key) != 0)
+                                continue;
+                            collapsed_bases.insert(base_key);
+                            static_cast<ConfigOptionVectorBase*>(dst_opt)->set_at(src_opt, 0, idx);
+                        } else {
+                            if (idx >= dst_size)
+                                continue; // out-of-range variant: cannot apply; reported as skipped
+                            target.apply_only(config, {key}, true);
+                        }
+                    } else if (static_cast<const ConfigOptionVectorBase*>(src_opt)->size() !=
+                               static_cast<const ConfigOptionVectorBase*>(dst_opt)->size()) {
+                        // Whole-vector base key: the receiver must have a matching vector size,
+                        // otherwise applying would overwrite a different number of elements.
+                        continue; // cannot apply; will be reported as skipped
+                    } else {
+                        target.apply_only(config, {key}, true);
+                    }
+                    applied_keys.insert(key);
+                } else {
+                    // A scalar key cannot carry a '#N' suffix; a hand-crafted file listing one
+                    // is reported as skipped instead of being silently marked applied.
+                    if (key.find('#') != std::string::npos)
+                        continue;
+                    // Scalar key: apply only if present on the user's machine.
+                    const ConfigOption* dst_opt = target.option(base_key);
+                    if (dst_opt == nullptr)
+                        continue; // not present on the edited preset; will be reported as skipped
+                    // Type mismatch: skipped, never thrown (see the vector branch above).
+                    if (dst_opt->type() != src_opt->type())
+                        continue;
+                    target.apply_only(config, {key}, true);
+                    applied_keys.insert(key);
+                }
+            }
+        };
+        apply_published(this->prints.get_edited_preset().config, nullptr);
+        apply_published(this->printers.get_edited_preset().config, &printer_allowlist);
+
+        // Material pass: positional per-slot entries. The author published, per slot, either the
+        // entire filament (full) or specific keys plus optionally a curated type and/or colour.
+        //   - full: lands on a freshly created standalone detached copy (no library preset used
+        //     or mutated);
+        //   - partial: a type requirement gates application; on mismatch the slot is replaced
+        //     with the best visible candidate by published identity (exact name, setting_id,
+        //     filament_id, vendor+type, type); with no replacement the receiver's material is
+        //     kept and the keys are reported as skipped;
+        //   - colour: applied regardless of the type gate.
+        //   - capacity: past the printer's physical nozzles the entry becomes an empty
+        //     mixed-filament placeholder; on a single-physical-slot receiver it is dropped.
+        // Applied partial values land on the collection's edited layer when the slot references
+        // it and that layer survives the load, otherwise on the stored preset in place. Slots
+        // aliasing a shared preset are re-pointed at distinct presets before the values apply.
+        {
+            // Grow the receiver's slots only as far as the highest published slot (never
+            // shrink, never pull filler materials for unpublished slots).
+            bool has_published_entries = false;
+            // Physical filament capacity of the receiver's printer: a non-SEMM tool-changer
+            // feeds filament N from nozzle N, so the nozzle count is the hard limit; a SEMM
+            // printer (single_extruder_multi_material) sizes its slot list by hand, so only
+            // the global slot limit applies (same condition as GUI_App::load_current_presets).
+            // Published entries that would need a NEW physical slot past this capacity are
+            // appended as empty mixed-filament placeholders instead of growing the list.
+            size_t physical_capacity = size_t(EnforcerBlockerType::ExtruderMax);
+            {
+                const Preset& receiver_printer = this->printers.get_edited_preset();
+                if (receiver_printer.printer_technology() == ptFFF &&
+                    !receiver_printer.config.opt_bool("single_extruder_multi_material")) {
+                    if (const auto* nozzle_diameter = receiver_printer.config.option<ConfigOptionFloats>("nozzle_diameter");
+                        nozzle_diameter != nullptr && !nozzle_diameter->values.empty())
+                        physical_capacity = nozzle_diameter->values.size();
+                }
+            }
+            const std::set<std::string>& mixed_definitions = publish_mixed_keys();
+            auto is_mixed_definition                      = [&mixed_definitions](const PublishedMaterialEntry& entry) {
+                return std::any_of(entry.keys.begin(), entry.keys.end(), [&](const std::string& key) {
+                    return mixed_definitions.count(publish_base_key(key)) != 0;
+                });
+            };
+            size_t grow_target = 0;
+            for (const PublishedMaterialEntry& entry : published_config->material_keys) {
+                has_published_entries = true;
+                if (entry.slot < 0)
+                    continue;
+                // A physical entry past the capacity becomes a tail placeholder below; its
+                // growth is covered by the append counter, not the positional target.
+                if (!is_mixed_definition(entry) && size_t(entry.slot) >= physical_capacity)
+                    continue;
+                grow_target = std::max(grow_target, size_t(entry.slot) + 1);
+            }
+            // Mixed-filament definitions live in project-level virtual slots, so applying one
+            // positionally onto a receiver slot holding a real filament would convert hardware
+            // state into a virtual mix. Compute each entry's destination before anything
+            // consumes entry.slot: a definition on a slot that already holds a mixed definition
+            // keeps its place (like-for-like); everything else follows one monotone append
+            // counter preserving author order (dest = max(authored, next_free)). Appends past
+            // the extruder limit are dropped and reported. Physical entries past capacity join
+            // the same counter as mixed_placeholder empties the GUI flags for assignment.
+            //
+            // The finished project keeps the physical-first invariant (see the sidebar's
+            // add_custom_filament: mixed slots always sit at the tail, physical slots packed
+            // first). That invariant must survive an import, so every receiver mixed slot that
+            // would end up inside (or ahead of) the incoming physical region is displaced to a
+            // fresh tail slot, and the tail allocator starts at the physical boundary rather
+            // than the receiver's slot count - otherwise a relocated mix can collide with a
+            // keep-placed new real slot.
+            size_t physical_boundary = this->num_physical_filaments();
+            for (const PublishedMaterialEntry& entry : published_config->material_keys)
+                // Mirror the payload-real keep-place decision below: a real keeps its authored
+                // slot when that slot already exists on the receiver, or lies within the
+                // printer's physical capacity. Both end up as physical slots at index
+                // entry.slot, so they bound the physical region even past the capacity.
+                if (entry.slot >= 0 && !is_mixed_definition(entry) &&
+                    (size_t(entry.slot) < this->filament_presets.size() || size_t(entry.slot) < physical_capacity))
+                    physical_boundary = std::max(physical_boundary, size_t(entry.slot) + 1);
+            size_t next_free_slot      = std::max(physical_boundary, this->filament_presets.size());
+            bool   any_mixed_relocated = false;
+            // All authored-slot -> destination moves decided by this pass, applied to the
+            // incoming config in one batched snapshot step below (an earlier move's
+            // destination can overlap a later move's source: adjacent tail mixes relocate
+            // onto consecutive slots, so incremental in-place shifts would overwrite a
+            // definition that has not been moved yet).
+            std::vector<std::pair<size_t, size_t>> mixed_moves;
+            // Receiver-mix relocations land in project_config, not the incoming config, so they
+            // get their own move list, applied below after the arrays grow. The swept set lets
+            // the payload loop below treat a displaced receiver mix as the physical slot it will
+            // become (a payload mix like-for-like overriding such a slot must itself relocate).
+            std::vector<std::pair<size_t, size_t>> receiver_mix_moves;
+            std::set<size_t>                        swept_mix_slots;
+            for (size_t slot = 0; slot < this->filament_presets.size(); ++slot) {
+                if (!this->is_mixed_filament(slot))
+                    continue;
+                // Slot 0 is the receiver's base filament and is never a virtual mix; the
+                // sidebar's physical-first layout guarantees it, so never displace it.
+                if (slot == 0)
+                    continue;
+                if (slot >= physical_boundary)
+                    continue; // already lives in the tail region
+                const size_t dest = next_free_slot++;
+                swept_mix_slots.insert(slot);
+                receiver_mix_moves.emplace_back(slot, dest);
+                any_mixed_relocated = true;
+                // A payload mix authored at the same slot (a mix inside the physical region) is
+                // processed after this sweep and overrides its own destination below.
+                published_config->mixed_slot_relocations.insert_or_assign(int(slot), int(dest));
+                published_config->material_replacements.emplace_back("slot " + std::to_string(slot) + " -> slot " +
+                                                                      std::to_string(dest) + ": mixed filament");
+                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": published 3MF relocated receiver mixed filament slot " << slot
+                                        << " -> " << dest << " (physical-first rebalance)";
+            }
+            for (auto entry_it = published_config->material_keys.begin(); entry_it != published_config->material_keys.end();) {
+                PublishedMaterialEntry& entry = *entry_it;
+                if (entry.slot < 0) {
+                    ++entry_it;
+                    continue;
+                }
+                const bool is_payload_mix = is_mixed_definition(entry);
+                // Does this entry need a tail slot at all? A payload mixed definition does,
+                // except when it like-for-like overrides a receiver slot that is already a
+                // mix (bounds-checked). A physical entry only becomes a placeholder when it
+                // would need a NEW physical slot: an authored position the receiver's list
+                // already covers is applied positionally as before, even when that list sits
+                // above the printer's capacity (pre-existing state is never shrunk).
+                bool keep_place = false;
+                if (is_payload_mix)
+                    keep_place = this->is_mixed_filament(size_t(entry.slot)) && swept_mix_slots.count(size_t(entry.slot)) == 0;
+                else
+                    keep_place = size_t(entry.slot) < this->filament_presets.size() ||
+                                 size_t(entry.slot) < physical_capacity;
+                if (keep_place) {
+                    ++entry_it;
+                    continue;
+                }
+                const std::string material_label = !entry.filament_id.empty()        ? entry.filament_id :
+                                                   !entry.publish_type_value.empty() ? entry.publish_type_value :
+                                                                                       entry.filament_type;
+                if (std::max(size_t(entry.slot), next_free_slot) >= size_t(EnforcerBlockerType::ExtruderMax)) {
+                    // No free virtual slot left: report instead of destroying a real filament.
+                    // The local skipped_keys is published wholesale at the end of the pass;
+                    // writing published_config->skipped_keys here would be clobbered by it.
+                    skipped_keys.emplace_back("material:" + material_label + (is_payload_mix ?
+                                                                                  " (mixed filament definition: filament slot limit reached)" :
+                                                                                  " (filament slot limit reached)"));
+                    BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": published 3MF " << (is_payload_mix ? "mixed filament definition" : "material")
+                                               << " from slot " << entry.slot << " could not be placed: all " << next_free_slot
+                                               << " slots exhausted";
+                    entry_it = published_config->material_keys.erase(entry_it);
+                    continue;
+                }
+                if (!is_payload_mix && physical_capacity < 2) {
+                    // A single physical slot can never host a mixed-filament editor (the
+                    // sidebar's mixed section needs two physical filaments to mix), so a
+                    // placeholder would be invisible and unfixable: drop the entry and
+                    // report it like any other unappliable input.
+                    skipped_keys.emplace_back("material:" + material_label + " (printer supports only " +
+                                              std::to_string(physical_capacity) + " filament)");
+                    BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": published 3MF material from slot " << entry.slot
+                                               << " dropped: printer supports only " << physical_capacity << " filament";
+                    entry_it = published_config->material_keys.erase(entry_it);
+                    continue;
+                }
+                const int authored_slot = entry.slot;
+                const int dest_slot     = is_payload_mix ? int(std::max(size_t(authored_slot), next_free_slot)) : int(next_free_slot);
+                next_free_slot          = size_t(dest_slot) + 1;
+                if (is_payload_mix) {
+                    if (dest_slot == authored_slot)
+                        // Uncontended fresh tail slot: the definition is already readable there.
+                        ++entry_it;
+                    else {
+                        entry.slot              = dest_slot;
+                        any_mixed_relocated     = true;
+                        mixed_moves.emplace_back(size_t(authored_slot), size_t(entry.slot));
+                        published_config->mixed_slot_relocations.insert_or_assign(authored_slot, entry.slot);
+                        published_config->material_replacements.emplace_back("slot " + std::to_string(authored_slot) + " -> slot " +
+                                                                             std::to_string(entry.slot) + ": mixed filament");
+                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": published 3MF relocated mixed filament slot " << authored_slot
+                                                << " -> " << entry.slot;
+                        ++entry_it;
+                    }
+                } else {
+                    // Surplus published material beyond the printer's capacity: become an
+                    // empty mixed-filament placeholder at the next free tail slot. The flag
+                    // routes the entry to the placeholder finalize below; the slot's
+                    // definition stays empty until the user assigns components.
+                    entry.mixed_placeholder = true;
+                    any_mixed_relocated     = true;
+                    if (dest_slot != authored_slot) {
+                        entry.slot = dest_slot;
+                        mixed_moves.emplace_back(size_t(authored_slot), size_t(dest_slot));
+                        published_config->mixed_slot_relocations.insert_or_assign(authored_slot, dest_slot);
+                    }
+                    published_config->material_replacements.emplace_back(
+                        (dest_slot != authored_slot ?
+                             "slot " + std::to_string(authored_slot) + " -> slot " + std::to_string(dest_slot) :
+                             "slot " + std::to_string(dest_slot)) +
+                        ": unassigned mixed filament (printer supports only " + std::to_string(physical_capacity) + " filaments)");
+                    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": published 3MF material from slot " << authored_slot
+                                            << " placed as an unassigned mixed filament at slot " << dest_slot
+                                            << " (printer supports only " << physical_capacity << " filaments)";
+                    ++entry_it;
+                }
+            }
+            if (!mixed_moves.empty())
+                for (const std::string& mixed_key : mixed_definitions)
+                    apply_mixed_config_relocations(config, mixed_key, mixed_moves);
+            if (has_published_entries) {
+                // Defensive cap: growth never exceeds the file's own filament count. The
+                // receiver's current slot count is a floor: neither the preset list nor the
+                // project vectors are ever shrunk, even when the file carries fewer filaments
+                // than the receiver has slots. Relocated mixed entries and capacity
+                // placeholders legitimately land past the file's own slot count (virtual
+                // slots consume no nozzle or tray), so their append destinations lift the
+                // ceiling explicitly.
+                const size_t target_slots = std::max({this->filament_presets.size(), std::min(grow_target, num_filaments),
+                                                      any_mixed_relocated ? next_free_slot : size_t(0)});
+                // Slots carrying published content, steering the initial preset selection of
+                // newly grown slots.
+                std::set<int> published_slots;
+                for (const PublishedMaterialEntry& entry : published_config->material_keys)
+                    if (entry.slot >= 0)
+                        published_slots.insert(entry.slot);
+                // Grown slots the receiver creates that carry no published content of their own
+                // (e.g. an unpublished mixed slot left as a gap by a published mix's authored
+                // position) at or beyond the receiver's physical capacity. They must not become
+                // physical filaments (that would overflow the nozzle count): finalized as empty
+                // mixed placeholders below, like the surplus-material placeholders.
+                std::set<int> virtual_gap_slots;
+                // Exact-name resolution of each published slot's preset through the collection's
+                // own name machinery: find_preset2 follows renamed_from (vendor profile renames)
+                // and canonical bundle names, and auto-matches removed vendor-generic profiles
+                // to the Orca Filament Library. First entry per slot wins (mirrors the loops'
+                // break-on-first behavior); an empty value means "no resolution" and the string
+                // tiers (raw name / trimmed bare name / alias) below take over.
+                std::map<int, std::string> exact_name_by_slot;
+                for (const PublishedMaterialEntry& entry : published_config->material_keys)
+                    if (entry.slot >= 0 && !entry.preset_name.empty() && exact_name_by_slot.count(entry.slot) == 0)
+                        if (const Preset* resolved = this->filaments.find_preset2(entry.preset_name, true))
+                            exact_name_by_slot.emplace(entry.slot, resolved->name);
+                auto resolved_name_for = [&exact_name_by_slot](int slot) -> std::string {
+                    const auto it = exact_name_by_slot.find(slot);
+                    return it == exact_name_by_slot.end() ? std::string() : it->second;
+                };
+                // Mirror first_visible_idx()'s start index so suppressed default presets are
+                // never picked as a slot material.
+                const size_t first_candidate = this->filaments.is_default_suppressed() ? this->filaments.num_default_presets() : 0;
+                // Candidate preference for a published entry: exact preset name (raw author and
+                // collection-resolved), then trimmed bare form / alias, then exact setting_id
+                // (variant-level), then exact filament_id, then vendor+type, then type only.
+                auto candidate_score = [](const Preset& candidate, const PublishedMaterialEntry& entry,
+                                          const std::string& resolved_name) -> int {
+                    // Exact preset name: raw and collection-resolved forms both outrank the
+                    // fuzzy bare/alias tier by tier value, so a receiver preset literally named
+                    // "Generic PLA" (tier 4) can never beat the author's exact
+                    // "Generic PLA @Vendor" (tier 5). Within one tier the strict ">"
+                    // comparison keeps the first candidate in collection order.
+                    if (!entry.preset_name.empty() && candidate.name == entry.preset_name)
+                        return 5;
+                    if (!resolved_name.empty() && candidate.name == resolved_name)
+                        return 5;
+                    if (!entry.preset_name.empty()) {
+                        std::string bare_name = entry.preset_name.substr(0, entry.preset_name.find('@'));
+                        boost::trim_right(bare_name);
+                        if (!bare_name.empty() &&
+                            (candidate.alias == entry.preset_name || candidate.name == bare_name || candidate.alias == bare_name))
+                            return 4;
+                    }
+                    if (!entry.setting_id.empty() && candidate.setting_id == entry.setting_id)
+                        return 3;
+                    const ConfigOptionStrings* types   = candidate.config.opt<ConfigOptionStrings>("filament_type");
+                    const ConfigOptionStrings* vendors = candidate.config.opt<ConfigOptionStrings>("filament_vendor");
+                    const std::string type             = (types != nullptr && !types->values.empty()) ? types->get_at(0) : std::string();
+                    const std::string vendor = (vendors != nullptr && !vendors->values.empty()) ? vendors->get_at(0) : std::string();
+                    if (!entry.filament_id.empty() && candidate.filament_id == entry.filament_id)
+                        return 2;
+                    // Tier 0/1 family gate: the explicit type requirement when published as
+                    // such, otherwise the entry's own material family - so identity scoring
+                    // also applies to entries published without a checked Type row.
+                    const std::string required_type = !entry.publish_type_value.empty() ? entry.publish_type_value :
+                                                                                          normalize_filament_type(entry.filament_type);
+                    if (!required_type.empty() && normalize_filament_type(type) == required_type) {
+                        if (!entry.filament_vendor.empty() && vendor == entry.filament_vendor)
+                            return 1;
+                        return 0;
+                    }
+                    return -1;
+                };
+                while (this->filament_presets.size() < target_slots) {
+                    const size_t new_slot_idx = this->filament_presets.size();
+                    std::string initial_preset;
+                    if (new_slot_idx >= physical_capacity && published_slots.count(static_cast<int>(new_slot_idx)) == 0)
+                        // An unpublished grown slot past the printer's physical capacity cannot
+                        // host a real filament: finalize it as a virtual placeholder below.
+                        virtual_gap_slots.insert(static_cast<int>(new_slot_idx));
+                    if (published_slots.count(static_cast<int>(new_slot_idx)) != 0) {
+                        // Grow the slot the way the sidebar "add filament" does: seed it with
+                        // the receiver's last preset.
+                        if (!this->filament_presets.empty())
+                            initial_preset = this->filament_presets.back();
+                    }
+                    if (initial_preset.empty())
+                        // Unpublished filler slot, or every visible preset is already used:
+                        // repeat the receiver's last preset ("Add one filament" behaviour).
+                        initial_preset = this->filament_presets.empty() ? this->filaments.first_visible().name :
+                                                                          this->filament_presets.back();
+                    this->filament_presets.emplace_back(initial_preset);
+                }
+                // Published slots that alias another slot (multi-extruder with one filament)
+                // get re-pointed at distinct presets: the overlay writes onto the slot's
+                // effective preset in place, so a shared preset would leak one slot's published
+                // values into every aliased slot. Slot 0 (the receiver's own material) is never
+                // re-assigned; when no unused candidate exists the aliasing stays (unavoidable).
+                auto referenced_elsewhere = [&](const std::string& preset_name, size_t except_slot) {
+                    for (size_t s = 0; s < this->filament_presets.size(); ++s)
+                        if (s != except_slot && this->filament_presets[s] == preset_name)
+                            return true;
+                    return false;
+                };
+                for (size_t slot = 1; slot < this->filament_presets.size(); ++slot) {
+                    if (published_slots.count(static_cast<int>(slot)) == 0 || !referenced_elsewhere(this->filament_presets[slot], slot))
+                        continue;
+                    // A slot whose published entry writes nothing into a shared preset in place
+                    // keeps its own preset: de-aliasing would needlessly swap the material. Only
+                    // keys routed to the slot's preset can leak across an aliased slot (colour is
+                    // slot-scoped via project_config; a type requirement is handled by the
+                    // type-gate below; full detaches separately). Mixed-definition keys go to the
+                    // per-slot project arrays, never the preset.
+                    bool writes_preset_keys = false;
+                    for (const PublishedMaterialEntry& entry : published_config->material_keys) {
+                        if (entry.slot != static_cast<int>(slot))
+                            continue;
+                        for (const std::string& key : entry.keys)
+                            if (mixed_definitions.count(publish_base_key(key)) == 0) {
+                                writes_preset_keys = true;
+                                break;
+                            }
+                        if (writes_preset_keys)
+                            break;
+                    }
+                    if (!writes_preset_keys)
+                        continue;
+                    // Prefer the best distinct candidate for the slot's published material
+                    // (exact id, then vendor+type, then type only), compatible presets first...
+                    std::string replacement;
+                    int best_score = -1;
+                    for (const PublishedMaterialEntry& entry : published_config->material_keys) {
+                        // Scored for every entry with an identity, not only when a Type
+                        // requirement was checked (same as the growth seeding above).
+                        if (entry.slot != static_cast<int>(slot))
+                            continue;
+                        const std::string resolved_name = resolved_name_for(entry.slot);
+                        auto scan                       = [&](bool compatible_only) -> std::pair<int, std::string> {
+                            int best_score = -1;
+                            std::string best_name;
+                            for (size_t i = first_candidate; i < this->filaments.size(); ++i) {
+                                const Preset& candidate = this->filaments.preset(i);
+                                if (compatible_only && !candidate.is_compatible)
+                                    continue;
+                                const int score = candidate_score(candidate, entry, resolved_name);
+                                // Exact identity tiers (name / setting_id) may use a hidden preset;
+                                // the referenced check stays: re-pointing exists to de-alias.
+                                if (score < 3 && !candidate.is_visible)
+                                    continue;
+                                if (referenced_elsewhere(candidate.name, size_t(-1)))
+                                    continue;
+                                if (score > best_score) {
+                                    best_score = score;
+                                    best_name  = candidate.name;
+                                }
+                            }
+                            return {best_score, best_name};
+                        };
+                        const auto [compat_score, compat_name] = scan(true);
+                        const auto [any_score, any_name]       = scan(false);
+                        if (compat_score >= 0) {
+                            best_score  = compat_score;
+                            replacement = compat_name;
+                        } else if (any_score >= 0) {
+                            best_score  = any_score;
+                            replacement = any_name;
+                        }
+                        if (best_score >= 0)
+                            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": published 3MF re-pointed slot " << slot << " to " << replacement
+                                                    << " (score " << best_score << ", preset_name \"" << entry.preset_name << "\", type \""
+                                                    << entry.publish_type_value << "\")";
+                        break;
+                    }
+                    // ...otherwise any distinct visible preset not referenced by another slot,
+                    // preferring the published material's own family when it is known.
+                    if (replacement.empty()) {
+                        std::string slot_family;
+                        for (const PublishedMaterialEntry& entry : published_config->material_keys)
+                            if (entry.slot == static_cast<int>(slot)) {
+                                slot_family = !entry.publish_type_value.empty() ? entry.publish_type_value :
+                                                                                  normalize_filament_type(entry.filament_type);
+                                break;
+                            }
+                        for (size_t i = first_candidate; i < this->filaments.size(); ++i) {
+                            const Preset& candidate = this->filaments.preset(i);
+                            if (!candidate.is_visible || referenced_elsewhere(candidate.name, size_t(-1)))
+                                continue;
+                            if (!slot_family.empty()) {
+                                const ConfigOptionStrings* types = candidate.config.opt<ConfigOptionStrings>("filament_type");
+                                const std::string cand_type      = (types != nullptr && !types->values.empty()) ? types->get_at(0) :
+                                                                                                                  std::string();
+                                if (normalize_filament_type(cand_type) != slot_family)
+                                    continue;
+                            }
+                            replacement = candidate.name;
+                            break;
+                        }
+                    }
+                    if (replacement.empty())
+                        continue; // every visible preset is referenced: aliasing is unavoidable
+                    const std::string aliased_name = this->filament_presets[slot];
+                    this->filament_presets[slot]   = replacement;
+                    material_applied               = true;
+                    // The re-point used to be silent; surface it like the other slot changes.
+                    published_config->material_replacements.emplace_back("slot " + std::to_string(slot) + ": " + aliased_name + " -> " +
+                                                                         replacement);
+                }
+                // Grow the per-slot colour/type/map project vectors to the new slot count and
+                // seed the new entries so the slots render with colours instead of blank chips
+                // (mirrors set_num_filaments; existing values are left untouched).
+                ConfigOptionStrings* proj_colour       = this->project_config.opt<ConfigOptionStrings>("filament_colour");
+                ConfigOptionStrings* proj_multi_colour = this->project_config.opt<ConfigOptionStrings>("filament_multi_colour");
+                ConfigOptionStrings* proj_colour_type  = this->project_config.opt<ConfigOptionStrings>("filament_colour_type");
+                ConfigOptionInts* proj_map             = this->project_config.opt<ConfigOptionInts>("filament_map");
+                ConfigOptionInts* proj_nozzle_map      = this->project_config.opt<ConfigOptionInts>("filament_nozzle_map");
+                ConfigOptionInts* proj_volume_map      = this->project_config.opt<ConfigOptionInts>("filament_volume_map");
+                const size_t old_colour_count          = (proj_colour != nullptr) ? proj_colour->values.size() : 0;
+                // Grow-only: an already-larger project vector is left untouched (the receiver's
+                // slot count never shrinks below its own setup).
+                if (proj_colour && proj_colour->values.size() < target_slots)
+                    proj_colour->resize(target_slots);
+                if (proj_multi_colour && proj_multi_colour->values.size() < target_slots)
+                    proj_multi_colour->values.resize(target_slots);
+                if (proj_colour_type && proj_colour_type->values.size() < target_slots)
+                    proj_colour_type->values.resize(target_slots);
+                if (proj_map && proj_map->values.size() < target_slots)
+                    proj_map->values.resize(target_slots, 1);
+                if (proj_nozzle_map && proj_nozzle_map->values.size() < target_slots)
+                    proj_nozzle_map->values.resize(target_slots, 0);
+                if (proj_volume_map && proj_volume_map->values.size() < target_slots)
+                    proj_volume_map->values.resize(target_slots, static_cast<int>(NozzleVolumeType::nvtStandard));
+                // The mixed-color project arrays are parallel per-slot like filament_colour;
+                // grow them in lockstep so a published mix slot has room for its definition.
+                // Defaults mirror set_num_filaments (false / empty string).
+                if (auto* opt = this->project_config.opt<ConfigOptionBools>("filament_is_mixed"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, false);
+                if (auto* opt = this->project_config.opt<ConfigOptionStrings>("filament_mixed_components"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, std::string{});
+                if (auto* opt = this->project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, std::string{});
+                if (auto* opt = this->project_config.opt<ConfigOptionBools>("filament_mixed_gradient"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, false);
+                if (auto* opt = this->project_config.opt<ConfigOptionStrings>("filament_mixed_gradient_range"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, std::string{});
+                if (auto* opt = this->project_config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, std::string{});
+                if (auto* opt = this->project_config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part"))
+                    if (opt->values.size() < target_slots)
+                        opt->values.resize(target_slots, false);
+                if (this->ams_multi_color_filment.size() < target_slots)
+                    this->ams_multi_color_filment.resize(target_slots);
+                for (size_t slot = old_colour_count; slot < target_slots; ++slot) {
+                    std::string seed;
+                    for (const PublishedMaterialEntry& entry : published_config->material_keys)
+                        if (entry.slot == static_cast<int>(slot) && entry.publish_color && !entry.color.empty()) {
+                            seed = entry.color;
+                            break;
+                        }
+                    if (seed.empty()) {
+                        if (const Preset* preset = this->filaments.find_preset(this->filament_presets[slot], false)) {
+                            const ConfigOptionStrings* colours = preset->config.opt<ConfigOptionStrings>("filament_colour");
+                            if (colours != nullptr && !colours->values.empty())
+                                seed = colours->values.front();
+                        }
+                        if (seed.empty()) {
+                            // Fall back to the option's registered default instead of a
+                            // duplicated literal; if the lookup fails the chip stays blank.
+                            if (const ConfigOptionDef* colour_def = print_config_def.get("filament_colour"))
+                                if (const auto* default_colours = dynamic_cast<const ConfigOptionStrings*>(colour_def->default_value.get()))
+                                    if (!default_colours->values.empty())
+                                        seed = default_colours->values.front();
+                        }
+                    }
+                    if (proj_colour && slot < proj_colour->values.size())
+                        proj_colour->values[slot] = seed;
+                    if (proj_multi_colour && slot < proj_multi_colour->values.size())
+                        proj_multi_colour->values[slot] = seed;
+                    if (proj_colour_type && slot < proj_colour_type->values.size())
+                        proj_colour_type->values[slot] = "1"; // default colour type
+                }
+                // Rebuild the flush volumes for the grown slot count (as set_num_filaments does).
+                this->update_multi_material_filament_presets();
+
+                auto apply_slot_keys = [&](DynamicPrintConfig& preset_config, const std::vector<std::string>& slot_keys, int author_slot,
+                                           const std::string& material_label) {
+                    for (const std::string& key : slot_keys) {
+                        const std::string base_key = publish_base_key(key);
+                        if (structural_keys.count(base_key) != 0)
+                            continue;
+                        const ConfigOption* src_opt = config.option(base_key);
+                        if (src_opt == nullptr || !src_opt->is_vector() || author_slot < 0 ||
+                            author_slot >= static_cast<int>(static_cast<const ConfigOptionVectorBase*>(src_opt)->size())) {
+                            skipped_keys.emplace_back("material:" + material_label + " (" + key + ")");
+                            continue;
+                        }
+                        ConfigOption* dst_opt = preset_config.option(base_key);
+                        if (dst_opt == nullptr || !dst_opt->is_vector() || static_cast<const ConfigOptionVectorBase*>(dst_opt)->empty() ||
+                            dst_opt->type() != src_opt->type()) {
+                            skipped_keys.emplace_back("material:" + material_label + " (" + key + ")");
+                            continue;
+                        }
+                        // Per-slot scalar copy: the receiver preset holds one value per key
+                        // (vector of size 1), the file holds the per-slot vector.
+                        static_cast<ConfigOptionVectorBase*>(dst_opt)->set_at(src_opt, 0, author_slot);
+                        material_applied = true;
+                    }
+                };
+
+                // The slot's values are applied onto the slot's effective preset (the
+                // collection's edited layer when the slot references it, otherwise the stored
+                // preset in place); the per-entry type gate below may re-point the slot first.
+                //
+                // The edited layer only survives the load when the final re-select below stays
+                // off, i.e. slot 0's preset still matches the edited preset. Otherwise the
+                // re-select re-snapshots the edited layer from a stored preset and silently
+                // discards everything written there: route the overlay to the stored presets
+                // instead so the values survive. (Residual edge: a slot-0 type replacement
+                // re-pointing slot 0 mid-loop can still invalidate the layer after earlier
+                // slots wrote to it; that compound case is not chased.)
+                const bool edited_survives_load = this->filament_presets.empty() ||
+                                                  this->filament_presets.front() == this->filaments.get_edited_preset().name;
+                // Displaced receiver mixes (see the physical-first rebalance above): move their
+                // per-slot cells onto the grown tail slots and reset the vacated physical slots,
+                // so the incoming real filaments can claim them. Runs before mixed_final_slots is
+                // built, so the rebalanced layout is what the mix validation sees.
+                apply_receiver_mix_relocations(this->project_config, this->ams_multi_color_filment, receiver_mix_moves);
+                // Final layout for mix-definition validation: every slot that will hold a
+                // mixed definition once this load completes - the receiver's own virtual
+                // slots, each published mixed entry's final (possibly relocated) slot, and
+                // each capacity placeholder (they become mixes in the finalize below, before
+                // this loop's is_mixed_filament scan would see them). Mix components are
+                // 1-based slot numbers, so a component is valid only when the slot it names
+                // exists and does not itself hold a mixed filament.
+                std::set<int> mixed_final_slots;
+                for (const PublishedMaterialEntry& mix_entry : published_config->material_keys)
+                    if (mix_entry.slot >= 0 && (is_mixed_definition(mix_entry) || mix_entry.mixed_placeholder))
+                        mixed_final_slots.insert(mix_entry.slot);
+                for (size_t i = 0; i < this->filament_presets.size(); ++i)
+                    if (this->is_mixed_filament(i))
+                        mixed_final_slots.insert(int(i));
+                // Unpublished gap slots past the capacity are virtual too: count them in the
+                // final layout so a published mix whose components collide with one is caught.
+                for (int gap_slot : virtual_gap_slots)
+                    mixed_final_slots.insert(gap_slot);
+                const size_t mixed_final_slot_count = this->filament_presets.size();
+                // Finalize a slot as an empty mixed-filament placeholder: mark it virtual with
+                // an intentionally empty definition, and add it to the final-layout set so a
+                // later entry's components validate against the new state. Used by the capacity
+                // placeholders and by any mixed definition that has to be rejected after its
+                // slot was already grown and seeded - without it such a slot would keep the
+                // seeded preset and masquerade as a real filament. No definition is written:
+                // the placeholder carries no material of its own (the GUI flags the empty mix
+                // via check_mixed_filament_integrity and blocks slicing until components are
+                // assigned). The slot's colour was already seeded by the growth pass above.
+                auto finalize_mixed_placeholder = [&](size_t slot_idx) {
+                    if (ConfigOptionBools* is_mixed_opt = this->project_config.opt<ConfigOptionBools>("filament_is_mixed");
+                        is_mixed_opt != nullptr && slot_idx < is_mixed_opt->values.size())
+                        is_mixed_opt->values[slot_idx] = true;
+                    mixed_final_slots.insert(int(slot_idx));
+                    material_applied = true;
+                };
+                // Full Publish within-load dedup: identical Full materials (same setting_id
+                // + preset_name identity) share one created instance, so an author who
+                // pointed two slots at one preset yields one standalone copy here.
+                std::map<std::string, std::string> published_full_dedup;
+                for (const PublishedMaterialEntry& entry : published_config->material_keys) {
+                    if (entry.slot < 0 || size_t(entry.slot) >= this->filament_presets.size())
+                        continue; // out of range: nothing to do for this slot
+                    const size_t slot = size_t(entry.slot);
+
+                    // Surplus published material beyond the printer's capacity: finalize the
+                    // tail placeholder - mark the slot virtual with an intentionally empty
+                    // definition. The GUI flags the empty mix (check_mixed_filament_integrity)
+                    // and blocks slicing until the user assigns components from their own
+                    // filaments. The entry's keys are deliberately not applied and no preset
+                    // is detached: the placeholder carries no material of its own. The colour
+                    // was already seeded into the project arrays by the growth pass above.
+                    if (entry.mixed_placeholder) {
+                        finalize_mixed_placeholder(slot);
+                        continue;
+                    }
+
+                    // Resolve the stored preset itself (real=true), never the edited snapshot:
+                    // find_preset would return &m_edited_preset for the selected slot. The
+                    // overlay target below decides between the edited layer and this preset.
+                    Preset* recv = this->filaments.find_preset(this->filament_presets[slot], false, true);
+                    if (recv == nullptr) {
+                        // Defensive: the slot exists (grown and seeded above) but its preset
+                        // could not be resolved. A mixed definition left unapplied on such a
+                        // slot would keep the seeded preset and look like a real filament:
+                        // finalize it as an empty placeholder instead, like a rejected
+                        // definition below.
+                        if (is_mixed_definition(entry) && !this->is_mixed_filament(slot)) {
+                            finalize_mixed_placeholder(slot);
+                            published_config->material_replacements.emplace_back("slot " + std::to_string(slot) +
+                                                                                 ": mixed filament definition could not be imported");
+                        }
+                        continue;
+                    }
+
+                    const std::string material_label = entry.filament_id.empty() ?
+                                                           (entry.publish_type_value.empty() ? entry.filament_type :
+                                                                                               entry.publish_type_value) :
+                                                           entry.filament_id;
+
+                    // Import-side validation of a mixed-filament definition: the publish
+                    // dialog cannot produce a definition whose components reference slots
+                    // that do not exist or hold other mixed filaments, so a broken one here
+                    // means the payload itself is broken (hand-crafted or corrupt file).
+                    // Report it through the same channel as every other rejected input and
+                    // skip the entry, instead of shipping a mix the GUI integrity check
+                    // (check_mixed_filament_integrity) would only flag later. A payload
+                    // that omits the mixed arrays entirely is not an error here: the key
+                    // routing below reports those per key as usual.
+                    if (is_mixed_definition(entry)) {
+                        std::string mix_error;
+                        if (const ConfigOptionStrings* comp_opt = config.opt<ConfigOptionStrings>("filament_mixed_components");
+                            comp_opt != nullptr && entry.slot < static_cast<int>(comp_opt->values.size())) {
+                            const std::vector<unsigned int> comps = parse_mixed_components(comp_opt->values[entry.slot]);
+                            if (comps.size() < 2)
+                                // An empty definition cell counts as broken too: applying it
+                                // would ship a mix the sidebar would only flag later.
+                                mix_error = "needs at least two components";
+                            else
+                                for (unsigned int comp : comps)
+                                    if (comp < 1 || size_t(comp) > mixed_final_slot_count ||
+                                        mixed_final_slots.count(int(comp) - 1) != 0) {
+                                        mix_error = "components reference missing slots";
+                                        break;
+                                    }
+                        }
+                        if (!mix_error.empty()) {
+                            skipped_keys.emplace_back("material:" + material_label + " (mixed filament definition: " + mix_error + ")");
+                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": published 3MF mixed filament from slot " << entry.slot
+                                                       << " rejected: " << mix_error;
+                            // Degradation, not silent corruption: the slot was already grown and
+                            // seeded by the pass above, so skipping the definition alone would
+                            // leave it holding the seeded preset and looking like a real
+                            // filament that carries the mix identity but no mix.
+                            //  - a slot that was NOT already a receiver mix is finalized as an
+                            //    empty mixed placeholder (consistent with the capacity
+                            //    placeholders; the user assigns components there);
+                            //  - a like-for-like override of the receiver's own mix leaves that
+                            //    valid definition untouched: nothing was applied, so the
+                            //    receiver's cells are intact and only the author's definition
+                            //    is reported as skipped above.
+                            if (!this->is_mixed_filament(slot)) {
+                                finalize_mixed_placeholder(slot);
+                                published_config->material_replacements.emplace_back("slot " + std::to_string(slot) +
+                                                                                     ": mixed filament definition could not be imported (" +
+                                                                                     mix_error + ")");
+                            }
+                            continue;
+                        }
+                    }
+
+                    // Full Publish: always create a standalone detached copy (even on exact
+                    // identity match) as a "Preset Inside Project" (project-embedded: lives
+                    // in this project only, never written to the library), universally
+                    // compatible, named after the author's preset with its variant tail
+                    // stripped ("(Published)" uniquification on collision). No existing
+                    // preset is ever mutated.
+                    if (entry.full) {
+                        std::string dedup_key = entry.setting_id + std::string("\x1f") + entry.preset_name;
+                        // Identity-less hand-crafted files (empty setting_id+name) must not
+                        // collide: fall back to slot-scoped key so each slot gets its own copy
+                        // unless the dedup above is meaningful.
+                        if (dedup_key == std::string("\x1f"))
+                            dedup_key = dedup_key + std::to_string(slot);
+                        else if (!entry.filament_id.empty())
+                            dedup_key += std::string("\x1f") + entry.filament_id;
+                        std::string new_name;
+                        const auto dedup_it = published_full_dedup.find(dedup_key);
+                        if (dedup_it != published_full_dedup.end()) {
+                            new_name = dedup_it->second;
+                        } else {
+                            // Baseline: clone the receiver slot's stored preset config (schema-
+                            // complete across versions), then overlay the published full_keys.
+                            DynamicPrintConfig new_cfg = recv != nullptr ? recv->config : this->filaments.default_preset().config;
+                            for (const std::string& key : entry.full_keys) {
+                                const std::string base_key = publish_base_key(key);
+                                if (structural_keys.count(base_key) != 0)
+                                    continue;
+                                const ConfigOption* src_opt = config.option(base_key);
+                                if (src_opt == nullptr || !src_opt->is_vector() || entry.slot < 0 ||
+                                    entry.slot >= static_cast<int>(static_cast<const ConfigOptionVectorBase*>(src_opt)->size()))
+                                    continue;
+                                ConfigOption* dst_opt = new_cfg.option(base_key);
+                                if (dst_opt == nullptr || !dst_opt->is_vector() ||
+                                    static_cast<const ConfigOptionVectorBase*>(dst_opt)->empty() || dst_opt->type() != src_opt->type())
+                                    continue;
+                                static_cast<ConfigOptionVectorBase*>(dst_opt)->set_at(src_opt, 0, entry.slot);
+                            }
+                            // The published colour is authoritative even for Full (the payload's
+                            // filament_colour plus the explicit publish_color field).
+                            if (entry.publish_color && !entry.color.empty()) {
+                                if (ConfigOptionStrings* col = new_cfg.opt<ConfigOptionStrings>("filament_colour", true)) {
+                                    if (col->values.empty())
+                                        col->values.emplace_back();
+                                    col->values[0] = entry.color;
+                                }
+                            }
+                            make_publish_universal(new_cfg);
+                            // Naming: stripped variant tail ("Generic PLA @System" -> "Generic
+                            // PLA"), then identity fallbacks; collisions uniquify with
+                            // "(Published)" / "(Published N)" inside add_detached_preset.
+                            std::string base_name = entry.preset_name.empty() ? std::string() :
+                                                                                publish_material_base_name(entry.preset_name);
+                            if (base_name.empty()) {
+                                base_name = !entry.filament_id.empty() ?
+                                                entry.filament_id :
+                                                (!entry.publish_type_value.empty() ? entry.publish_type_value : entry.filament_type);
+                                if (base_name.empty())
+                                    base_name = "Published Filament";
+                            }
+                            new_name = this->filaments.add_detached_preset(base_name, std::move(new_cfg), entry.filament_id);
+                            published_full_dedup.emplace(dedup_key, new_name);
+                        }
+                        const std::string old_name   = this->filament_presets[slot];
+                        this->filament_presets[slot] = new_name;
+                        material_applied             = true;
+                        published_config->material_replacements.emplace_back("slot " + std::to_string(slot) + ": " + old_name + " -> " +
+                                                                             new_name);
+                        // Colour is slot-scoped and project-visible: sync into project_config
+                        // (the copy already baked it, this makes the chips render).
+                        if (entry.publish_color && !entry.color.empty()) {
+                            if (ConfigOptionStrings* proj_colour = this->project_config.opt<ConfigOptionStrings>("filament_colour")) {
+                                if (slot < proj_colour->values.size())
+                                    proj_colour->values[slot] = entry.color;
+                            }
+                            if (ConfigOptionStrings* proj_multi_colour = this->project_config.opt<ConfigOptionStrings>(
+                                    "filament_multi_colour")) {
+                                if (slot < proj_multi_colour->values.size())
+                                    proj_multi_colour->values[slot] = entry.color;
+                            }
+                        } else if (proj_colour && new_name != old_name) {
+                            // Fall back to the copy's colour so the chip is never blank: try
+                            // the newly created preset's filament_colour, then the option default.
+                            std::string seed;
+                            if (const Preset* created = this->filaments.find_preset(new_name, false, true)) {
+                                if (const ConfigOptionStrings* cols = created->config.opt<ConfigOptionStrings>("filament_colour"))
+                                    if (!cols->values.empty())
+                                        seed = cols->values.front();
+                            }
+                            if (seed.empty()) {
+                                if (const ConfigOptionDef* colour_def = print_config_def.get("filament_colour"))
+                                    if (const auto* defaults = dynamic_cast<const ConfigOptionStrings*>(colour_def->default_value.get()))
+                                        if (!defaults->values.empty())
+                                            seed = defaults->values.front();
+                            }
+                            if (!seed.empty()) {
+                                if (proj_colour && slot < proj_colour->values.size())
+                                    proj_colour->values[slot] = seed;
+                                if (proj_multi_colour && slot < proj_multi_colour->values.size())
+                                    proj_multi_colour->values[slot] = seed;
+                            }
+                        }
+                        if (proj_colour_type && slot < proj_colour_type->values.size())
+                            proj_colour_type->values[slot] = "1";
+                        continue;
+                    }
+
+                    bool apply_slot = true;
+                    // The gate compares against the slot's effective material type: the edited
+                    // layer when the slot references the collection's edited preset and that
+                    // layer will survive the load (see edited_survives_load below), the stored
+                    // preset otherwise.
+                    const DynamicPrintConfig& effective_config = (edited_survives_load &&
+                                                                  recv->name == this->filaments.get_edited_preset().name) ?
+                                                                     this->filaments.get_edited_preset().config :
+                                                                     recv->config;
+                    if (entry.publish_type && !entry.publish_type_value.empty()) {
+                        // Null-guard: a malformed receiver preset may lack filament_type.
+                        const ConfigOptionStrings* recv_types = effective_config.opt<ConfigOptionStrings>("filament_type");
+                        const std::string recv_type = (recv_types != nullptr && !recv_types->values.empty()) ? recv_types->get_at(0) :
+                                                                                                               std::string();
+                        if (normalize_filament_type(recv_type) != entry.publish_type_value) {
+                            // Type mismatch: replace the slot with the best matching preset,
+                            // scored by the published identity (exact preset name, then exact
+                            // setting_id, exact filament_id, then vendor+type, then type only).
+                            // A preset no other slot references wins on equal scores; a shared
+                            // exact-material preset is taken even though mutating it also
+                            // affects the other slot. Compatible presets are searched first: an
+                            // incompatible preset is only picked when no compatible candidate
+                            // exists at all.
+                            auto find_best = [&](bool compatible_only) -> std::pair<int, std::string> {
+                                auto scan = [&](bool unreferenced_only) -> std::pair<int, std::string> {
+                                    int best_score = -1;
+                                    std::string best_name;
+                                    const std::string resolved_name = resolved_name_for(entry.slot);
+                                    for (size_t i = first_candidate; i < this->filaments.size(); ++i) {
+                                        const Preset& candidate = this->filaments.preset(i);
+                                        if (compatible_only && !candidate.is_compatible)
+                                            continue;
+                                        const int score = candidate_score(candidate, entry, resolved_name);
+                                        if (score <= best_score)
+                                            continue;
+                                        // Lower tiers (vendor+type, type only) need a visible preset;
+                                        // an exact identity match (name / setting_id) wins even when
+                                        // the preset is hidden in the library.
+                                        if (score < 3 && !candidate.is_visible)
+                                            continue;
+                                        if (unreferenced_only) {
+                                            bool used = false;
+                                            for (size_t s = 0; s < this->filament_presets.size(); ++s)
+                                                if (s != slot && this->filament_presets[s] == candidate.name) {
+                                                    used = true;
+                                                    break;
+                                                }
+                                            if (used)
+                                                continue;
+                                        }
+                                        best_score = score;
+                                        best_name  = candidate.name;
+                                    }
+                                    return {best_score, best_name};
+                                };
+                                const auto [strict_score, strict_name]   = scan(true);
+                                const auto [relaxed_score, relaxed_name] = scan(false);
+                                if (relaxed_score > strict_score)
+                                    return {relaxed_score, relaxed_name};
+                                return {strict_score, strict_name};
+                            };
+                            const auto [compat_score, compat_name] = find_best(true);
+                            const auto [any_score, any_name]       = find_best(false);
+                            int score                              = any_score;
+                            std::string replacement                = any_name;
+                            if (compat_score >= 0) {
+                                score       = compat_score;
+                                replacement = compat_name;
+                            }
+                            if (!replacement.empty()) {
+                                const std::string old_name   = recv->name;
+                                this->filament_presets[slot] = replacement;
+                                recv                         = this->filaments.find_preset(replacement, false, true);
+                                material_applied             = true;
+                                BOOST_LOG_TRIVIAL(info)
+                                    << __FUNCTION__ << ": published 3MF slot " << slot << " material " << old_name << " -> " << replacement
+                                    << " (score " << score << ", preset_name \"" << entry.preset_name << "\", filament_id \""
+                                    << entry.filament_id << "\", setting_id \"" << entry.setting_id << "\", type \""
+                                    << entry.publish_type_value << "\")";
+                                std::string replacement_line = "slot " + std::to_string(slot) + ": " + old_name + " -> " + replacement;
+                                // A pick that is not the exact published material is a substitute;
+                                // an entry without identity fields cannot be judged, so it stays plain.
+                                if (score < 2 && (!entry.filament_id.empty() || !entry.filament_vendor.empty()))
+                                    replacement_line += " (substitute)";
+                                published_config->material_replacements.emplace_back(std::move(replacement_line));
+                            } else {
+                                // Partial publish with no replacement: keep the receiver's
+                                // material and report the slot's keys as skipped. (Full entries
+                                // never reach this gate: they detach above.)
+                                for (const std::string& key : entry.keys)
+                                    skipped_keys.emplace_back("material:" + material_label + " (" + key + ")");
+                                apply_slot = false;
+                                // A mixed definition left unapplied here would keep the grown
+                                // slot's seeded preset and masquerade as a real filament:
+                                // finalize it as an empty placeholder like a rejected
+                                // definition (a like-for-like override of the receiver's own
+                                // mix is left untouched).
+                                if (is_mixed_definition(entry) && !this->is_mixed_filament(slot)) {
+                                    finalize_mixed_placeholder(slot);
+                                    published_config->material_replacements.emplace_back("slot " + std::to_string(slot) +
+                                                                                         ": mixed filament definition could not be imported");
+                                }
+                            }
+                        }
+                    }
+
+                    // The values below are applied onto the slot's effective preset: the edited
+                    // layer when the slot references the collection's edited preset and that
+                    // layer will survive the load (visible as a modification and revertible,
+                    // preserving the user's unsaved edits), otherwise the stored preset it ended
+                    // up on (original or partial type replacement), in place. Full entries never
+                    // get here - they detach above.
+                    DynamicPrintConfig& write_config = (edited_survives_load && recv->name == this->filaments.get_edited_preset().name) ?
+                                                           this->filaments.get_edited_preset().config :
+                                                           recv->config;
+
+                    // Colour is slot-scoped and independent of the type gate; it is also synced
+                    // into project_config for GUI rendering.
+                    if (entry.publish_color && !entry.color.empty()) {
+                        // A mixed-definition entry carries the mix's blended colour for the
+                        // swatch only: never write it into the slot's (possibly shared) preset
+                        // config, only into the project-level colour arrays.
+                        const bool is_mixed_entry = is_mixed_definition(entry);
+                        if (!is_mixed_entry && recv != nullptr) {
+                            // Create the key when the target preset lacks it: the colour is a
+                            // requirement, not an override.
+                            if (ConfigOptionStrings* colour = write_config.opt<ConfigOptionStrings>("filament_colour", true)) {
+                                if (colour->values.empty())
+                                    colour->values.emplace_back();
+                                colour->values[0] = entry.color;
+                                material_applied  = true;
+                            }
+                        }
+                        if (ConfigOptionStrings* proj_colour = this->project_config.opt<ConfigOptionStrings>("filament_colour")) {
+                            if (slot < proj_colour->values.size())
+                                proj_colour->values[slot] = entry.color;
+                        }
+                        if (ConfigOptionStrings* proj_multi_colour = this->project_config.opt<ConfigOptionStrings>(
+                                "filament_multi_colour")) {
+                            if (slot < proj_multi_colour->values.size())
+                                proj_multi_colour->values[slot] = entry.color;
+                        }
+                    }
+
+                    if (apply_slot && recv != nullptr) {
+                        // Mixed-color definition keys live in project_config (parallel per-slot
+                        // arrays), not in a filament preset; route them there. Normal keys keep
+                        // the per-slot preset path below.
+                        const std::set<std::string>& mixed_keys = publish_mixed_keys();
+                        std::vector<std::string>        preset_keys;
+                        for (const std::string& key : entry.keys) {
+                            const std::string base_key = publish_base_key(key);
+                            if (mixed_keys.count(base_key) != 0) {
+                                const ConfigOption* src_opt = config.option(base_key);
+                                if (src_opt != nullptr && src_opt->is_vector() && entry.slot >= 0 &&
+                                    entry.slot < static_cast<int>(static_cast<const ConfigOptionVectorBase*>(src_opt)->size())) {
+                                    if (ConfigOption* dst_opt = this->project_config.option(base_key)) {
+                                        if (dst_opt->is_vector() && dst_opt->type() == src_opt->type() &&
+                                            slot < static_cast<const ConfigOptionVectorBase*>(dst_opt)->size()) {
+                                            static_cast<ConfigOptionVectorBase*>(dst_opt)->set_at(src_opt, slot, entry.slot);
+                                            material_applied = true;
+                                            continue;
+                                        }
+                                    }
+                                }
+                                // The slot (or its arrays) could not be written: report rather
+                                // than drop the mix silently.
+                                skipped_keys.emplace_back("material:" + material_label + " (" + key + ")");
+                                continue;
+                            }
+                            preset_keys.emplace_back(key);
+                        }
+                        apply_slot_keys(write_config, preset_keys, entry.slot, material_label);
+                    }
+                }
+                // Unpublished gap slots past the printer's physical capacity: the receiver grew
+                // them only to reach a published definition, so they must not become physical
+                // filaments (that would overflow the nozzle count). Finalize each as an empty
+                // mixed placeholder, exactly like the surplus-material placeholders above.
+                for (int gap_slot : virtual_gap_slots)
+                    if (!this->is_mixed_filament(size_t(gap_slot))) {
+                        finalize_mixed_placeholder(size_t(gap_slot));
+                        published_config->material_replacements.emplace_back(
+                            "slot " + std::to_string(gap_slot) +
+                            ": unassigned mixed filament (printer supports only " + std::to_string(physical_capacity) + " filaments)");
+                    }
+            }
+        }
+
+        for (const std::string& key : published_config->published_keys) {
+            if (applied_keys.count(key) != 0)
+                continue;
+            const std::string base_key = publish_base_key(key);
+            // Structural keys are silently ignored, never reported as skipped: a hand-crafted
+            // 3MF must not trigger the "could not be applied" warning for them.
+            if (structural_keys.count(base_key) != 0)
+                continue;
+            // Printer-class keys outside the publishable allowlist are contract-excluded too.
+            if (contract_excluded_keys.count(base_key) != 0)
+                continue;
+            skipped_keys.emplace_back(key);
+        }
+        published_config->skipped_keys = std::move(skipped_keys);
+
+        // The overlay lands on the edited layer only when it survives the load (slot 0's preset
+        // still matches the edited preset; see edited_survives_load) and on the stored presets
+        // otherwise. The edited preset is a snapshot taken when the preset was last selected, so
+        // a slot-0 preset change (type replacement) still needs a re-select to surface; when
+        // slot 0 is unchanged the edited layer already carries the overlay, and re-selecting
+        // would discard both it and the user's unsaved edits.
+        if (material_applied && !this->filament_presets.empty() &&
+            this->filament_presets.front() != this->filaments.get_edited_preset().name)
+            this->filaments.select_preset_by_name(this->filament_presets.front(), false);
+    }
+
+
     //BBS
     //const std::string &physical_printer = config.option<ConfigOptionString>("physical_printer_settings_id", true)->value;
     const std::string physical_printer;
-    if (this->printers.get_edited_preset().is_external || physical_printer.empty()) {
-        this->physical_printers.unselect_printer();
-    } else {
-        // Activate the physical printer profile if possible.
-        PhysicalPrinter *pp = this->physical_printers.find_printer(physical_printer, true);
-        if (pp != nullptr && std::find(pp->preset_names.begin(), pp->preset_names.end(), this->printers.get_edited_preset().name) != pp->preset_names.end())
-            this->physical_printers.select_printer(pp->name, this->printers.get_edited_preset().name);
-        else
+    if (!is_published) {
+        if (this->printers.get_edited_preset().is_external || physical_printer.empty()) {
             this->physical_printers.unselect_printer();
+        } else {
+            // Activate the physical printer profile if possible.
+            PhysicalPrinter *pp = this->physical_printers.find_printer(physical_printer, true);
+            if (pp != nullptr && std::find(pp->preset_names.begin(), pp->preset_names.end(), this->printers.get_edited_preset().name) != pp->preset_names.end())
+                this->physical_printers.select_printer(pp->name, this->printers.get_edited_preset().name);
+            else
+                this->physical_printers.unselect_printer();
+        }
     }
     //BBS: add config related logs
     BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": finished");
@@ -5465,7 +6783,7 @@ std::string PresetBundle::load_vendor_preset(
         loaded.description = entry.description;
         loaded.setting_id = entry.setting_id;
         // Derive the preset setting_id on the fly when a profile ships without one,
-        // matching scripts/orca_id_tool.py. Only instantiated presets carry an id;
+        // matching scripts/orca_profile_tool.py. Only instantiated presets carry an id;
         // non-instantiated base profiles return earlier above. This never
         // touches the per-user cloud-sync setting_id written into user .info files.
         if (loaded.setting_id.empty() && entry.instantiation == "true")
@@ -6301,6 +7619,9 @@ bool PresetBundle::has_errors(bool check_duplicate_filament_subtypes) const
     if (this->check_preset_references())
         has_errors = true;
 
+    if (this->check_printer_default_materials())
+        has_errors = true;
+
     return has_errors;
 }
 
@@ -6393,6 +7714,70 @@ bool PresetBundle::check_preset_references() const
     return found;
 }
 
+bool PresetBundle::check_printer_default_materials() const
+{
+    bool found = false;
+    // A model's default_materials list is shared by its variants, so report each unknown name once.
+    std::set<const VendorProfile::PrinterModel *> checked_models;
+    // default_filament_profile is inherited from shared base machine presets, so one bad name can
+    // surface on many variants; report it once, at the first printer that names it.
+    std::set<std::string> reported_unknown_profiles;
+    for (const Preset &printer : printers) {
+        if (!printer.is_system || printer.vendor == nullptr || printer.printer_technology() != ptFFF)
+            continue;
+
+        const VendorProfile::PrinterModel *model = PresetUtils::system_printer_model(printer);
+        const PresetWithVendorProfile active_printer = printers.get_preset_with_vendor_profile(printer);
+        // Use the same name lookup as load_installed_filaments, not UI aliases or fuzzy matching.
+        // A model's defaults can cover different nozzles, but at least one must cover this variant.
+        const bool has_default = model != nullptr && std::any_of(model->default_materials.begin(), model->default_materials.end(),
+            [&](const std::string &name) {
+                const Preset *filament = filaments.find_preset(name, false);
+                return filament != nullptr && filament->is_system &&
+                       is_compatible_with_printer(filaments.get_preset_with_vendor_profile(*filament), active_printer);
+            });
+        if (!has_default) {
+            found = true;
+            BOOST_LOG_TRIVIAL(error) << "Printer preset \"" << printer.name << "\" (vendor \"" << printer.vendor->name
+                << "\", model \"" << printer.config.opt_string("printer_model") << "\", variant \""
+                << printer.config.opt_string("printer_variant")
+                << "\") has no compatible system filament in its model's \"default_materials\". "
+                   "Add at least one full filament preset name compatible with this printer variant:\n"
+                << preset_file_uri(printer.file);
+        }
+
+        if (model != nullptr && checked_models.insert(model).second) {
+            for (const std::string &name : model->default_materials) {
+                const Preset *filament = filaments.find_preset(name, false);
+                if (filament == nullptr || !filament->is_system) {
+                    found = true;
+                    BOOST_LOG_TRIVIAL(error) << "Printer model \"" << model->name << "\" (vendor \"" << printer.vendor->name
+                        << "\") names the unknown system filament \"" << name
+                        << "\" in its \"default_materials\":\n" << preset_file_uri(printer.file);
+                }
+            }
+        }
+
+        if (printer.config.has("default_filament_profile")) {
+            for (const std::string &name : printer.config.opt<ConfigOptionStrings>("default_filament_profile")->values) {
+                // A ";"-separated list can leave an empty trailing segment; formatting noise, not a name.
+                if (name.empty())
+                    continue;
+                const Preset *filament = filaments.find_preset(name, false);
+                if ((filament == nullptr || !filament->is_system) && reported_unknown_profiles.insert(name).second) {
+                    found = true;
+                    BOOST_LOG_TRIVIAL(error) << "Printer preset \"" << printer.name << "\" (vendor \"" << printer.vendor->name
+                        << "\", model \"" << printer.config.opt_string("printer_model") << "\", variant \""
+                        << printer.config.opt_string("printer_variant")
+                        << "\") names the unknown system filament \"" << name
+                        << "\" in its \"default_filament_profile\":\n" << preset_file_uri(printer.file);
+                }
+            }
+        }
+    }
+    return found;
+}
+
 // Orca: a filament is matched from the AMS by (filament_id + printer compatibility).
 // For any one printer, at most one instantiated filament preset with a given
 // filament_id may be compatible - otherwise the AMS match is ambiguous and the
diff --git a/src/libslic3r/PresetBundle.hpp b/src/libslic3r/PresetBundle.hpp
index 07e5444906..5a8f34e706 100644
--- a/src/libslic3r/PresetBundle.hpp
+++ b/src/libslic3r/PresetBundle.hpp
@@ -4,11 +4,14 @@
 #include "Preset.hpp"
 #include "PresetCacheFormat.hpp"
 #include "AppConfig.hpp"
+#include "PublishSettings.hpp"
 #include "enum_bitmask.hpp"
 
 #include <memory>
+#include <map>
 #include <set>
 #include <shared_mutex>
+#include <tuple>
 #include <unordered_map>
 #include <optional>
 #include <array>
@@ -168,6 +171,30 @@ struct PresetBundleMetadata
     }
 };
 
+// A "published" 3MF project: keeps the user's currently-selected presets and overlays only the
+// author-selected published keys onto the edited presets.
+struct PublishedConfig
+{
+    bool                        published = false;
+    std::vector<std::string>    published_keys;
+    // Per-slot published material keys, applied positionally (author slot N -> receiver slot N).
+    // Partial entries are gated by the author's optional type requirement and written onto the
+    // slot's stored preset in place; full entries instead detach (see PublishedMaterialEntry in
+    // PublishSettings.hpp).
+    std::vector<PublishedMaterialEntry> material_keys;
+    // Keys that could not be applied (missing on the user's machine or vector size mismatch),
+    // filled in by load_config_file_config for notification purposes.
+    std::vector<std::string>    skipped_keys;
+    // Human-readable notices of the slot material replacements performed while loading a
+    // published project, for the load notification.
+    std::vector<std::string>    material_replacements;
+    // Mixed-filament entries that had to be moved off their authored slot on load (a real,
+    // physical filament occupied it): maps the author's zero-based slot number to its final
+    // zero-based slot. Consumers (e.g. model extruder/color-painting remapping) use this to
+    // keep geometry references pointing at the relocated definitions.
+    std::map<int, int>          mixed_slot_relocations;
+};
+
 // Bundle of Print + Filament + Printer presets.
 class PresetBundle
 {
@@ -464,8 +491,8 @@ public:
 
     // Load configuration that comes from a model file containing configuration, such as 3MF et al.
     // This method is called by the Plater.
-    void                        load_config_model(const std::string &name, DynamicPrintConfig config, Semver file_version = Semver())
-        { this->load_config_file_config(name, true, std::move(config), file_version); }
+    void                        load_config_model(const std::string &name, DynamicPrintConfig config, Semver file_version = Semver(), PublishedConfig *published_config = nullptr)
+        { this->load_config_file_config(name, true, std::move(config), file_version, false, published_config); }
 
     // Load an external config file containing the print, filament and printer presets.
     // Instead of a config file, a G-code may be loaded containing the full set of parameters.
@@ -590,6 +617,11 @@ public:
     // compatible_prints references a deleted (unknown) or renamed (old) preset name.
     bool check_preset_references() const;
 
+    // Validator-only: every system FFF printer variant needs a compatible system filament
+    // named in its model's default_materials, every name there and in the printer's
+    // default_filament_profile must resolve to a system filament.
+    bool check_printer_default_materials() const;
+
     // Merge one vendor's presets with the other vendor's presets, report duplicates.
     // Public so per-vendor-cache consumers (e.g. the setup wizard) can assemble a
     // bundle out of several per-vendor caches loaded into separate PresetBundle instances.
@@ -626,6 +658,17 @@ private:
     bool m_generate_vendor_caches { false };
     bool m_preserve_vendor_source_paths { false };
 
+    // Vendor trees loaded by resolve_preset_config's manifest path, so every preset
+    // resolved through this bundle shares one load per source root and vendor. The
+    // filament library is one such tree, shared by every vendor under its root.
+    std::map<std::tuple<std::string, std::string, ForwardCompatibilitySubstitutionRule>, std::unique_ptr<PresetBundle>>
+        m_source_vendor_bundles;
+
+    const PresetBundle *load_source_vendor(const boost::filesystem::path &root_dir,
+                                           const std::string &vendor_id,
+                                           ForwardCompatibilitySubstitutionRule compatibility_rule,
+                                           std::string &error);
+
     // Orca: validation only - flag any printer with two or more compatible
     // filament presets sharing one filament_id (ambiguous AMS subtype match).
     bool check_duplicate_filament_subtypes() const;
@@ -646,7 +689,7 @@ private:
     // Load print, filament & printer presets from a config. If it is an external config, then the name is extracted from the external path.
     // and the external config is just referenced, not stored into user profile directory.
     // If it is not an external config, then the config will be stored into the user profile directory.
-    void                        load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config, Semver file_version = Semver(), bool selected = false);
+    void                        load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config, Semver file_version = Semver(), bool selected = false, PublishedConfig *published_config = nullptr);
     /*ConfigSubstitutions         load_config_file_config_bundle(
         const std::string &path, const boost::property_tree::ptree &tree, ForwardCompatibilitySubstitutionRule compatibility_rule);*/
 
diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp
index aee50db534..833b811535 100644
--- a/src/libslic3r/Print.cpp
+++ b/src/libslic3r/Print.cpp
@@ -20,6 +20,7 @@
 #include "GCode.hpp"
 #include "GCode/WipeTower.hpp"
 #include "GCode/WipeTower2.hpp"
+#include "GCode/WipeTowerEstimate.hpp"
 #include "Utils.hpp"
 #include "PrintConfig.hpp"
 #include "MaterialType.hpp"
@@ -232,6 +233,8 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "accel_to_decel_enable",
         "accel_to_decel_factor",
         "wipe_on_loops",
+        "wipe_inward",
+        "wipe_inward_distance",
         "gcode_comments",
         "gcode_label_objects", 
         "exclude_object",
@@ -357,6 +360,8 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "other_layers_print_sequence"
             || opt_key == "other_layers_print_sequence_nums" 
             || opt_key == "toolchange_ordering"
+            || opt_key == "toolchange_cyclic_order"
+            || opt_key == "toolchange_cyclic_first_layer"
             || opt_key == "extruder_ams_count"
             || opt_key == "extruder_nozzle_stats"
             || opt_key == "filament_map_mode"
@@ -961,6 +966,377 @@ StringObjectException Print::sequential_print_clearance_valid(const Print &print
     return single_object_exception;
 }
 
+// ---------------------------------------------------------------------------------------------
+// Clearance rule for a prime tower compacted by wipe_tower_no_sparse_layers.
+// Ported from BambuStudio and adapted to Orca's printer config: Orca has no
+// prime_tower_lift_height (z_hop alone bounds the spiral), spells the toolhead radius
+// extruder_clearance_radius, and derives the spiral slope from the per-filament travel_slope instead
+// of one global constant.
+// ---------------------------------------------------------------------------------------------
+
+double compacted_tower_footprint_padding(const PrintConfig &config, double brim_width)
+{
+    // The brim is deposited material like any other and reaches past the wall on the first layer, so
+    // the sweeping rod has to clear it too.
+    //
+    // On top of it, two effects make a nominal outline fall short of the printed tower on its low
+    // corner even though it overshoots by millimetres on the high one: WipeTower re-centres the tower
+    // by rib_offset once its first-layer wall is known, and the precise check hulls extrusion centre
+    // lines, so the deposited material reaches half a line width further still. Allowing a line width
+    // per side covers both, which is what keeps an estimated footprint enclosing the real one and the
+    // pre-slice check stricter than the precise one.
+    return std::max(0., brim_width) + 2. * config.nozzle_diameter.get_at(0);
+}
+
+Polygons compacted_wipe_tower_rings(const CompactedTowerZone &zone, bool any_body_tier)
+{
+    Polygons rings = zone.grown_nozzle;
+    if (any_body_tier)
+        append(rings, zone.grown_body);
+    return rings;
+}
+
+CompactedTowerZone compacted_wipe_tower_zone(const PrintConfig &config, const Polygon &tower_footprint)
+{
+    CompactedTowerZone zone;
+    if (tower_footprint.points.empty())
+        return zone;
+
+    // Spiral Z-hop at wipe-tower entry (the G3 Z I J that GCodeWriter emits for a SpiralLift) starts on
+    // the tower outline at a low Z. The spiral centre sits one radius away from the start point, so the
+    // circle reaches 2 * radius beyond the outline. radius = lift / (2*pi*atan(travel_slope)) is the
+    // same formula GCodeWriter uses; both are per filament, so take the widest any filament can make.
+    double spiral_reach = 0.;
+    for (size_t i = 0; i < config.z_hop.size(); ++i) {
+        const double lift = std::min(double(config.z_hop.get_at(i)), 5.);
+        if (lift < EPSILON)
+            continue;
+        const double slope = i < config.travel_slope.size() ? double(config.travel_slope.get_at(i)) : 0.;
+        if (slope < EPSILON)
+            continue;
+        spiral_reach = std::max(spiral_reach, 2. * lift / (2. * PI * std::atan(slope)));
+    }
+
+    // Working footprint = outline grown by the spiral envelope. All later clearance tests use this, so
+    // a travel that leaves the deposited wall at low Z is still treated as part of the tower.
+    zone.hull = tower_footprint;
+    if (spiral_reach > EPSILON) {
+        const Polygons grown = offset(tower_footprint, float(scale_(spiral_reach)), jtRound, scale_(0.1));
+        if (! grown.empty())
+            zone.hull = Geometry::convex_hull(grown);
+    }
+
+    // The rod sweeps the whole X axis, so its keep-out band is the tower's Y span widened by half
+    // the nozzle-to-rod offset per side (the instance carries the other half). Orca's sequential
+    // check has no such margin, having had no option to read it from until now.
+    zone.bbox_rod = zone.hull.bounding_box();
+    zone.bbox_rod.offset(scale_(config.extruder_clearance_dist_to_rod.value * 0.5));
+
+    // Horizontal clearance, mirroring the sequential print check down to how the distance is split:
+    // there each of the two object hulls grows by half of extruder_clearance_radius, so the two
+    // outlines touch exactly when the objects are the full radius apart. Splitting it the same way
+    // here (half on the tower, half on the instance in compacted_wipe_tower_clearance) states the
+    // same criterion, and it is what lets the plater draw both outlines: they meet at the instant the
+    // check trips, instead of one of them being already buried inside the other. The smaller
+    // MAX_OUTER_NOZZLE_DIAMETER tier is the bare nozzle cone, the only part narrow enough to sit
+    // beside an object rising less than nozzle_height. The 0.2 mm shaved off is the same rounding
+    // slack the sequential check applies, 0.1 mm per side. Both rings are built here; which one a
+    // given object is measured against depends on its own height and is decided in
+    // compacted_wipe_tower_clearance().
+    zone.body_radius  = config.extruder_clearance_radius.value;
+    zone.grown_body   = offset(zone.hull, float(scale_(compacted_tower_half_clearance(zone.body_radius))), jtRound, scale_(0.1));
+    zone.grown_nozzle = offset(zone.hull, float(scale_(compacted_tower_half_clearance(MAX_OUTER_NOZZLE_DIAMETER))), jtRound, scale_(0.1));
+    return zone;
+}
+
+CompactedTowerClearance compacted_wipe_tower_clearance(const PrintConfig &config, const CompactedTowerZone &zone,
+                                                      const Polygon &inst_hull, double object_rise)
+{
+    BoundingBox inst_bbox = inst_hull.bounding_box();
+    inst_bbox.offset(scale_(config.extruder_clearance_dist_to_rod.value * 0.5));
+
+    // Only the Y span matters for the rod: it spans the whole X axis, so an object sharing the tower's
+    // Y band passes under it however far apart the two are in X.
+    const bool overlaps_in_y = std::min(inst_bbox.max.y(), zone.bbox_rod.max.y()) - std::max(inst_bbox.min.y(), zone.bbox_rod.min.y()) > 0;
+
+    CompactedTowerClearance result;
+    result.far_clearance = overlaps_in_y ? config.extruder_clearance_height_to_rod.value : config.extruder_clearance_height_to_lid.value;
+
+    // The rod and the lid are the only obstacles once the object stands far enough away. Closer than
+    // the toolhead radius it is the head body itself that hits the object, and it does so as soon as
+    // the object rises past the nozzle cone, which is far below the rod.
+    // The instance carries the other half of each clearance, the tower rings already hold the first
+    // half; see compacted_wipe_tower_zone(). Both halves are needed for the verdict to mean
+    // "a full radius apart", and drawing what is tested is what keeps the plater honest.
+    //
+    // Which tier applies is a property of this object alone: the head body sits above the nozzle cone,
+    // so it cannot reach an object that stays below nozzle_height however close it stands, and however
+    // tall the rest of the plate is.
+    const bool object_is_short = object_rise <= double(config.nozzle_height.value) + EPSILON;
+    result.body_clearance      = object_is_short ? double(MAX_OUTER_NOZZLE_DIAMETER) : zone.body_radius;
+
+    const Polygons inst_near_nozzle = offset(inst_hull, float(scale_(compacted_tower_half_clearance(MAX_OUTER_NOZZLE_DIAMETER))), jtRound, scale_(0.1));
+    const bool     near_nozzle      = ! intersection(zone.grown_nozzle, inst_near_nozzle).empty();
+    result.near_body                = false;
+    if (! object_is_short) {
+        const Polygons inst_near_body = offset(inst_hull, float(scale_(compacted_tower_half_clearance(zone.body_radius))), jtRound, scale_(0.1));
+        result.near_body              = ! intersection(zone.grown_body, inst_near_body).empty();
+    }
+
+    result.allowed_rise = result.far_clearance;
+    if (near_nozzle)
+        result.allowed_rise = 0.;
+    else if (result.near_body)
+        result.allowed_rise = std::min(result.far_clearance, double(config.nozzle_height.value));
+    return result;
+}
+
+Polygon compacted_wipe_tower_offender_outline(const Polygon &inst_hull, double body_clearance)
+{
+    // Exactly the half-clearance the check grew this instance by, so the halo drawn around an object is
+    // the very outline that was tested against the tower ring of the same tier. Passing the clearance
+    // the object was actually judged on keeps a short object from being drawn with the wide ring it is
+    // not subject to.
+    const Polygons grown = offset(inst_hull, float(scale_(compacted_tower_half_clearance(body_clearance))), jtRound, scale_(0.1));
+    return grown.empty() ? inst_hull : grown.front();
+}
+
+// Shared user-facing message for every compacted-tower clearance failure. Height-limit and too-close
+// are the same class of layout violation under "No sparse layers", so they share one wording.
+static std::string compacted_wipe_tower_clearance_error()
+{
+    return L("The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\".");
+}
+
+// Convex hull of one print instance in bed coordinates, the same outline both compacted tower checks
+// compare against the tower.
+static Polygon compacted_tower_print_instance_hull(const PrintObject &object, const PrintInstance &instance)
+{
+    Points pts;
+    for (const ModelVolume *v : object.model_object()->volumes) {
+        if (! v->is_model_part())
+            continue;
+        Polygon hull = v->get_convex_hull_2d(Geometry::assemble_transform(Vec3d::Zero(), instance.model_instance->get_rotation(),
+                                                                          instance.model_instance->get_scaling_factor(), instance.model_instance->get_mirror()));
+        hull.translate(instance.shift - object.center_offset());
+        append(pts, hull.points);
+    }
+    return pts.empty() ? Polygon() : Geometry::convex_hull(pts);
+}
+
+// Footprint the compacted prime tower is expected to occupy on the plate, in bed coordinates.
+// Before psWipeTower has run there is no tower geometry at all, so this falls back to the same
+// estimate the plater builds its preview box from. Answering while the user is still arranging the
+// plate is the whole point of the pre-slice check, and an estimate is all that can be had then.
+static Polygon estimated_wipe_tower_footprint(const Print &print)
+{
+    const PrintConfig &config        = print.config();
+    const size_t       filaments_cnt = print.extruders().size();
+    if (filaments_cnt == 0)
+        return Polygon();
+
+    const WipeTowerData &wtd = print.wipe_tower_data(filaments_cnt);
+
+    double width, depth, brim;
+    Vec2d  local_min;
+    if (wtd.bbx.size().x() > EPSILON && wtd.bbx.size().y() > EPSILON) {
+        // The tower has already been generated once, so use its real box (brim included) instead of
+        // re-estimating. Same frame first_layer_wipe_tower_corners() works in.
+        width     = wtd.bbx.size().x();
+        depth     = wtd.bbx.size().y();
+        local_min = wtd.bbx.min + wtd.rib_offset.cast<double>();
+        brim      = 0.;
+    } else {
+        depth = wtd.depth;
+        if (depth < EPSILON)
+            return Polygon();
+        // PartPlate::estimate_wipe_tower_size() squares the rib tower off and the preview box the user
+        // drags around is built from that, so match it here rather than keeping the nominal width.
+        width     = config.wipe_tower_wall_type.value == WipeTowerWallType::wtwRib ? depth : double(config.prime_tower_width.value);
+        local_min = Vec2d::Zero();
+        brim      = double(wtd.brim_width);
+    }
+
+    const double padding = compacted_tower_footprint_padding(config, brim);
+    local_min -= Vec2d(padding, padding);
+    width += 2. * padding;
+    depth += 2. * padding;
+
+    const Eigen::Rotation2Dd rot(Geometry::deg2rad(config.wipe_tower_rotation_angle.value));
+    const Vec2d              translate(config.wipe_tower_x.get_at(print.get_plate_index()) + print.get_plate_origin()(0),
+                                       config.wipe_tower_y.get_at(print.get_plate_index()) + print.get_plate_origin()(1));
+
+    Polygon footprint;
+    for (const Vec2d &corner : { local_min,
+                                 Vec2d(local_min.x() + width, local_min.y()),
+                                 Vec2d(local_min.x() + width, local_min.y() + depth),
+                                 Vec2d(local_min.x(),         local_min.y() + depth) }) {
+        const Vec2d p = rot * corner + translate;
+        footprint.points.emplace_back(scale_(p.x()), scale_(p.y()));
+    }
+    return footprint;
+}
+
+// Pre-slice counterpart of validate_compacted_wipe_tower_clearance(). It applies the very same
+// clearance rule, but to an estimated tower footprint instead of the real tool-change extrusions,
+// which is what lets it run from Print::validate() before anything has been sliced. Reporting through
+// polygons / height_polygons rather than by throwing is what puts the collision area and the height
+// limit plane on the plater, exactly the way sequential printing does it.
+StringObjectException Print::compacted_wipe_tower_clearance_valid(const Print &print, Polygons *polygons, std::vector<std::pair<Polygon, float>> *height_polygons)
+{
+    const PrintConfig &config = print.config();
+    if (! wipe_tower_sparse_layers_skipped(config) || config.print_sequence != PrintSequence::ByLayer || ! print.has_wipe_tower())
+        return {};
+
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(config, estimated_wipe_tower_footprint(print));
+    if (zone.empty())
+        return {};
+
+    StringObjectException exception;
+    Polygons              offenders;
+    bool                  body_tier_used = false;
+    for (const PrintObject *object : print.objects()) {
+        const double object_top = unscaled<double>(object->max_z());
+        for (const PrintInstance &instance : object->instances()) {
+            const Polygon inst_hull = compacted_tower_print_instance_hull(*object, instance);
+            if (inst_hull.points.empty())
+                continue;
+            const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(config, zone, inst_hull, object_top);
+            body_tier_used                          = body_tier_used || compacted_tower_body_tier(clearance);
+            // Every tier the precise check applies is applied here too, otherwise an object standing
+            // within the toolhead radius would pass here and then be rejected mid-slice, which is the
+            // one outcome this check exists to prevent. The compacted tower base is unknown before
+            // slicing, so the rise is measured from the plate rather than from the tower top; that
+            // overstates it by the tower's own height and makes this check err strict, never lax.
+            if (object_top <= clearance.allowed_rise + EPSILON)
+                continue;
+
+            // Height-limit and too-close cases share one user-facing message: both mean the layout
+            // violates the "No sparse layers" clearance rule, and the remedies are the same.
+            const std::string msg = compacted_wipe_tower_clearance_error();
+            if (exception.string.empty()) {
+                exception.string = msg;
+                exception.object = instance.model_instance;
+            } else {
+                // Same wording for every offender; keep a single copy and drop the object pointer.
+                exception.object = nullptr;
+            }
+            const Polygon outline = compacted_wipe_tower_offender_outline(inst_hull, clearance.body_clearance);
+            offenders.emplace_back(outline);
+            if (height_polygons)
+                height_polygons->emplace_back(outline, float(clearance.allowed_rise));
+        }
+    }
+
+    // Draw the tower's keep-out ring alongside the offending objects, so the collision area reads as
+    // "this object reaches into the space the toolhead needs around the tower" rather than as a lone
+    // highlighted object. Emitted only on a real collision; the plater discards polygons otherwise.
+    // Only the rings some object on this plate is actually measured against are drawn, so that a ring
+    // and an object outline touching always means that object is over its limit.
+    if (polygons && ! offenders.empty()) {
+        append(*polygons, compacted_wipe_tower_rings(zone, body_tier_used));
+        append(*polygons, offenders);
+    }
+    return exception;
+}
+
+// With wipe_tower_no_sparse_layers the tower only grows on layers that carry a real toolchange,
+// so it ends up far below the object and the nozzle has to descend to it. While the nozzle sits
+// down on the compacted tower the rod is at tower_z + extruder_clearance_height_to_rod, and it
+// sweeps the tower's Y band across the whole X axis. Anything already printed above that line and
+// sharing the band gets hit. Nearer than the toolhead radius the head body hits the object well before
+// the rod does, which is the horizontal half of the same problem. The spiral Z-hop that opens a wipe-
+// tower travel also leaves the extrusion outline at a low Z, so the footprint used here is the
+// deposited hull grown by the spiral circle's maximum reach. This mirrors both clearance checks of
+// sequential printing, except that the tower is revisited over and over, so every object is compared
+// against it.
+void Print::validate_compacted_wipe_tower_clearance() const
+{
+    // Nothing to check when the tower is not compacted: it then follows the object as usual and the
+    // regular by-layer clearance check already covers it. Asking wipe_tower_sparse_layers_skipped()
+    // rather than the raw option keeps this from rejecting plates whose tower is in fact full height.
+    if (! wipe_tower_sparse_layers_skipped(m_config) || m_config.print_sequence != PrintSequence::ByLayer)
+        return;
+
+    const std::vector<std::vector<WipeTower::ToolChangeResult>> &tool_changes = m_wipe_tower_data.tool_changes;
+    if (tool_changes.empty() || m_objects.empty())
+        return;
+
+    // Same accumulation the G-code emitter runs, so validation and output cannot disagree.
+    const std::vector<float> tower_z = compute_compacted_wipe_tower_z(tool_changes, float(m_config.z_offset.value));
+
+    // Wipe tower footprint: build it from the ACTUAL tool-change extrusions rather than the nominal
+    // width x depth rectangle returned by first_layer_wipe_tower_corners(). With a rib wall the printed
+    // wall bulges past the nominal box and the first-layer brim reaches even further; the nominal box
+    // (m_wipe_tower_data.bbx) undercounts that outermost extent by several millimetres, which is
+    // exactly the extent that decides how close the sweeping rod comes to a neighbouring object. The
+    // extrusion end-points are stored in the wipe-tower local frame, so we map them to the bed frame
+    // with the same transform the G-code emitter applies. The two emitters differ in where rib_offset
+    // enters: WipeTowerIntegration::append_tcr() (type 1) rotates the point and then adds the offset,
+    // append_tcr2() (type 2) adds it before rotating. On a rotated rib-wall tower the two land several
+    // millimetres apart, which is exactly the margin this check measures, so follow the emitter in use.
+    const Eigen::Rotation2Dd wt_rot(Geometry::deg2rad(m_config.wipe_tower_rotation_angle.value));
+    const Vec2d              wt_translate(m_config.wipe_tower_x.get_at(m_plate_index) + m_origin(0),
+                                          m_config.wipe_tower_y.get_at(m_plate_index) + m_origin(1));
+    const Vec2d              rib_off        = m_wipe_tower_data.rib_offset.cast<double>();
+    const bool               rib_off_rotates = this->wipe_tower_type() == WipeTowerType::Type2;
+    auto to_bed = [&wt_rot, &wt_translate, &rib_off, rib_off_rotates](const Vec2d &pt) {
+        return rib_off_rotates ? Vec2d(wt_rot * (pt + rib_off) + wt_translate) : Vec2d(wt_rot * pt + wt_translate + rib_off);
+    };
+
+    Points tower_pts;
+    for (const std::vector<WipeTower::ToolChangeResult> &layer : tool_changes) {
+        if (layer.empty() || wipe_tower_layer_is_sparse(layer))
+            continue;
+        for (const WipeTower::ToolChangeResult &tcr : layer)
+            for (size_t i = 0; i < tcr.extrusions.size(); ++i) {
+                // A zero width marks a travel end-point. Keep it only when it opens a real extrusion, so
+                // the hull covers the deposited material and nothing else; travels reach a bit further out
+                // than the walls do.
+                const WipeTower::Extrusion &e = tcr.extrusions[i];
+                if (e.width == 0.f && (i + 1 == tcr.extrusions.size() || tcr.extrusions[i + 1].width == 0.f))
+                    continue;
+                const Vec2d p = to_bed(Vec2d(e.pos.x(), e.pos.y()));
+                tower_pts.emplace_back(scale_(p.x()), scale_(p.y()));
+            }
+    }
+    if (tower_pts.empty())
+        return;
+
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(m_config, Geometry::convex_hull(tower_pts));
+    if (zone.empty())
+        return;
+
+    for (const PrintObject *object : m_objects) {
+        const double object_top = unscaled<double>(object->max_z());
+        for (const PrintInstance &instance : object->instances()) {
+            const Polygon inst_hull = compacted_tower_print_instance_hull(*object, instance);
+            if (inst_hull.points.empty())
+                continue;
+
+            // Report the worst layer rather than the first offending one, it is the one that explains the
+            // collision best. The rise has to be known before the clearance: it is what selects the
+            // horizontal tier, the nozzle cone being out of the head body's reach.
+            double max_rise = 0.;
+            for (size_t i = 0; i < tool_changes.size(); ++i) {
+                if (tool_changes[i].empty() || wipe_tower_layer_is_sparse(tool_changes[i]))
+                    continue;
+                // Nothing above the current layer exists yet, so a tall object only counts up to it.
+                const double rise = std::min(object_top, double(tool_changes[i].front().print_z)) - tower_z[i];
+                if (rise > max_rise)
+                    max_rise = rise;
+            }
+
+            const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(m_config, zone, inst_hull, max_rise);
+            if (max_rise <= clearance.allowed_rise + EPSILON)
+                continue;
+            // Same wording as compacted_wipe_tower_clearance_valid(): height-limit and too-close
+            // share one message, since both are layout violations of "No sparse layers".
+            throw Slic3r::SlicingError(compacted_wipe_tower_clearance_error());
+        }
+    }
+}
+
 //BBS
 static StringObjectException layered_print_cleareance_valid(const Print &print, StringObjectException *warning)
 {
@@ -1031,20 +1407,21 @@ static StringObjectException layered_print_cleareance_valid(const Print &print,
 
     //BBS: add the wipe tower check logic
     const PrintConfig &       config   = print.config();
-    int                 filaments_count = print.extruders().size();
+    // Custom G-code tool changes (MultiAsSingle) build a real tower on a plate whose objects
+    // all use one filament, so they have to be counted or the hull below collapses to a point.
+    int                 filaments_count = print.extruders(true).size();
     int                 plate_index = print.get_plate_index();
     const Vec3d         plate_origin = print.get_plate_origin();
     float               x            = config.wipe_tower_x.get_at(plate_index) + plate_origin(0);
     float               y            = config.wipe_tower_y.get_at(plate_index) + plate_origin(1);
-    float               width        = config.prime_tower_width.value;
     float               a            = config.wipe_tower_rotation_angle.value;
     //float               v            = config.wiping_volume.value;
 
-    float        depth                     = print.wipe_tower_data(filaments_count).depth;
-    //float        brim_width                = print.wipe_tower_data(filaments_count).brim_width;
-
-    if (config.wipe_tower_wall_type.value == WipeTowerWallType::wtwRib)
-        width = depth;
+    // The estimate resolves the effective width (a rib wall squares the tower).
+    const WipeTowerData &wipe_tower_estimate = print.wipe_tower_data(filaments_count);
+    float                width               = wipe_tower_estimate.width;
+    float                depth               = wipe_tower_estimate.depth;
+    float                brim_width          = wipe_tower_estimate.brim_width;
 
     Polygons convex_hulls_temp;
     if (print.has_wipe_tower()) {
@@ -1066,36 +1443,54 @@ static StringObjectException layered_print_cleareance_valid(const Print &print,
             convex_hulls_temp.push_back(wipe_tower_polygon);
         }
     }
+    // Post-generation the mesh bottom already carries the brim. Pre-generation the body grows
+    // by the brim only when its width is explicit; the auto brim and a Type2 cone base depend on
+    // the tower height, exact only once generated, so they only warn here - the exact footprint
+    // is re-checked in _make_wipe_tower.
+    const bool exact_footprint     = print.is_step_done(psWipeTower);
+    Polygons   tower_polys_checked = (!exact_footprint && config.prime_tower_brim_width.value >= 0) ?
+                                         offset(convex_hulls_temp, float(scale_(brim_width))) :
+                                         convex_hulls_temp;
+    Polygons tower_polys_estimated;
+    if (!exact_footprint && !convex_hulls_temp.empty()) {
+        double max_height = 0.;
+        for (const PrintObject *object : print.objects())
+            max_height = std::max(max_height, unscale_(object->size().z()));
+        Polygon base = estimate_wipe_tower_first_layer_outline(config, print.wipe_tower_type(), width, depth, max_height);
+        base.rotate(Geometry::deg2rad(a));
+        base.translate(Point(scale_(x), scale_(y)));
+        tower_polys_estimated = offset(base, float(scale_(brim_width)));
+    }
+    // Object proximity stays a body-only warning: brim near-misses would newly warn on
+    // many setups that print fine.
     if (!intersection(convex_hulls_other, convex_hulls_temp).empty()) {
         if (warning) {
             warning->string += L("Prime Tower") + L(" is too close to others, and collisions may be caused.\n");
         }
     }
-    if (!intersection(exclude_polys, convex_hulls_temp).empty()) {
-        /*if (warning) {
-            warning->string += L("Prime Tower is too close to exclusion area, there may be collisions when printing.\n");
-        }*/
+    if (!intersection(exclude_polys, tower_polys_checked).empty()) {
         return {L("Prime Tower") + L(" is too close to an exclusion area, and collisions will be caused.\n")};
     }
-    if (print_config.enable_wrapping_detection.value && !intersection({wrapping_poly}, convex_hulls_temp).empty()) {
+    if (print_config.enable_wrapping_detection.value && !intersection({wrapping_poly}, tower_polys_checked).empty()) {
         return {L("Prime Tower") + L(" is too close to clumping detection area, and collisions will be caused.\n")};
     }
-    // Skip the containment check for towers that will never be printed (single-filament
-    // prints without smooth timelapse keep the config's tower position but emit nothing).
-    // Pre-generation only the body square is tested — the auto-brim estimate can overshoot
-    // the generated brim by several mm and must not hard-fail a print that physically fits.
-    // Post-generation the mesh bottom already includes the real brim, so the exact
-    // footprint is tested.
-    if (filaments_count > 1 || print.enable_timelapse_print()) {
-        // The shared printable polygon is plate-local, while the tower polygons above are
-        // already shifted by the plate origin.
-        Polygons    printable_polys = print.get_extruder_shared_printable_polygon();
-        const Point plate_shift(scale_(plate_origin.x()), scale_(plate_origin.y()));
-        for (Polygon &p : printable_polys)
-            p.translate(plate_shift);
-        if (!diff(convex_hulls_temp, printable_polys).empty())
-            return {L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n")};
+    if (warning && !intersection(exclude_polys, tower_polys_estimated).empty()) {
+        warning->string += L("Prime Tower") + L(" is too close to exclusion area, there may be collisions when printing.") + "\n";
     }
+    if (warning && print_config.enable_wrapping_detection.value && !intersection({wrapping_poly}, tower_polys_estimated).empty()) {
+        warning->string += L("Prime Tower") + L(" is too close to clumping detection area, there may be collisions when printing.") + "\n";
+    }
+    // No gate on "is there a tower": one that is not printed estimates to zero, so the hulls
+    // are degenerate and every check passes. Re-deriving it here missed the wrapping-detection
+    // tower on a single-filament plate.
+    Polygons    printable_polys = print.get_extruder_shared_printable_polygon();
+    const Point plate_shift(scale_(plate_origin.x()), scale_(plate_origin.y()));
+    for (Polygon &p : printable_polys)
+        p.translate(plate_shift);
+    if (!diff(tower_polys_checked, printable_polys).empty())
+        return {L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n")};
+    if (warning && !diff(tower_polys_estimated, printable_polys).empty())
+        warning->string += L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n");
     return {};
 }
 
@@ -1386,6 +1781,16 @@ StringObjectException Print::validate(std::vector<StringObjectException> *warnin
         }
         if (!layer_warning.string.empty())
             add_warning(layer_warning);
+
+        // Orca: a compacted prime tower drags the nozzle back down to the plate on every toolchange, so
+        // tall objects collide with it much like they do in sequential printing. Checking it here rather
+        // than only during slicing is what lets the plater show the collision area and the height limit
+        // while the plate is still being arranged.
+        ret = compacted_wipe_tower_clearance_valid(*this, collison_polygons, height_polygons);
+        if (!ret.string.empty()) {
+            ret.type = STRING_EXCEPT_OBJECT_COLLISION_IN_LAYER_PRINT;
+            return ret;
+        }
     }
 
     if (m_config.enable_prime_tower) {
@@ -2598,6 +3003,12 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
 
     if (this->has_wipe_tower()) {
         m_fake_wipe_tower.set_pos({ m_config.wipe_tower_x.get_at(m_plate_index), m_config.wipe_tower_y.get_at(m_plate_index) });
+        // Validated on every process() run rather than only when the wipe tower step is (re)generated.
+        // Moving the tower changes only wipe_tower_x/y, which invalidates psSkirtBrim but not psWipeTower,
+        // so a validate call living inside _make_wipe_tower would be skipped and keep using the stale
+        // position, missing a fresh collision. The tower geometry (tool_changes) is stored in the local
+        // frame and is position independent, so re-checking here with the current position is correct.
+        this->validate_compacted_wipe_tower_clearance();
     }
 
     if (this->set_started(psSkirtBrim)) {
@@ -3997,74 +4408,25 @@ bool Print::has_wipe_tower() const
 
 const WipeTowerData &Print::wipe_tower_data(size_t filaments_cnt) const
 {
-    // If the wipe tower wasn't created yet, make sure the depth and brim_width members are set to default.
-    double max_height = 0;
-    for (size_t obj_idx = 0; obj_idx < m_objects.size(); obj_idx++) {
-        double object_z = (double) m_objects[obj_idx]->size().z();
-        max_height      = std::max(unscale_(object_z), max_height);
+    // Until the tower is generated, size it with the estimate the GUI/CLI placement uses, so
+    // validation cannot reject a position the clamp just accepted.
+    if (is_step_done(psWipeTower) || filaments_cnt == 0)
+        return m_wipe_tower_data;
+
+    double max_height   = 0.;
+    double layer_height = std::numeric_limits<double>::max();
+    for (const PrintObject *object : m_objects) {
+        max_height   = std::max(max_height, unscale_(double(object->size().z())));
+        layer_height = std::min(layer_height, object->config().layer_height.value);
     }
-    if (max_height < EPSILON) return m_wipe_tower_data;
+    if (max_height < EPSILON)
+        return m_wipe_tower_data;
 
-    double layer_height                  = 0.08f; // hard code layer height
-    layer_height        = m_objects.front()->config().layer_height.value;
-
-    auto   timelapse_type  = config().option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
-    bool   need_wipe_tower = (timelapse_type ? (timelapse_type->value == TimelapseType::tlSmooth) : false) | (m_config.wipe_tower_wall_type.value == WipeTowerWallType::wtwRib);
-    double extra_spacing = config().option("prime_tower_infill_gap")->getFloat() / 100.;
-    double rib_width     = config().option("wipe_tower_rib_width")->getFloat();
-
-    double filament_change_volume = 0.;
-    {
-        std::vector<double> filament_change_lengths;
-        auto                filament_change_lengths_opt = config().option<ConfigOptionFloats>("filament_change_length");
-        if (filament_change_lengths_opt) filament_change_lengths = filament_change_lengths_opt->values;
-        double              length   = filament_change_lengths.empty() ? 0 : *std::max_element(filament_change_lengths.begin(), filament_change_lengths.end());
-        double              diameter = 1.75;
-        std::vector<double> diameters;
-        auto                filament_diameter_opt = config().option<ConfigOptionFloats>("filament_diameter");
-        if (filament_diameter_opt) diameters = filament_diameter_opt->values;
-        diameter               = diameters.empty() ? diameter : *std::max_element(diameters.begin(), diameters.end());
-        filament_change_volume = length * PI * diameter * diameter / 4.;
-    }
-
-
-    if (! is_step_done(psWipeTower) && filaments_cnt !=0) {
-        double wipe_volume  = m_config.prime_volume;
-        int filament_depth_count = m_config.nozzle_diameter.values.size() == 2 ? filaments_cnt : filaments_cnt - 1;
-        if (filaments_cnt == 1 && enable_timelapse_print()) filament_depth_count = 1;
-        double volume = wipe_volume * filament_depth_count;
-        if (m_config.nozzle_diameter.values.size() == 2) volume += filament_change_volume * (int) (filaments_cnt / 2);
-
-        // Sizing should take into account currently set wiping volumes.
-        // For a long time, the initial preview would just use 900/width per toolchange (15mm on a 60mm wide tower)
-        // and it worked well enough. Let's try to do slightly better by accounting for the purging volumes.
-        const bool semm_flush = m_config.purge_in_prime_tower && m_config.single_extruder_multi_material;
-        if (semm_flush) volume = WipeTower2::estimate_semm_flush_volume(m_config, filaments_cnt);
-
-        if (m_config.wipe_tower_wall_type.value == WipeTowerWallType::wtwRib) {
-            double depth = std::sqrt(volume / layer_height * extra_spacing);
-            if (need_wipe_tower || filaments_cnt > 1) {
-                float min_wipe_tower_depth = WipeTower::get_limit_depth_by_height(max_height);
-                depth  = std::max((double) min_wipe_tower_depth, depth);
-                depth += rib_width / std::sqrt(2) + config().wipe_tower_extra_rib_length.value;
-                const_cast<Print *>(this)->m_wipe_tower_data.depth = depth;
-                const_cast<Print *>(this)->m_wipe_tower_data.brim_width = m_config.prime_tower_brim_width;
-            }
-        }
-        else {
-            double width = m_config.prime_tower_width;
-            double depth = volume / (layer_height * width);
-            // The flush volumes already hold the spacing between wipes.
-            if (!semm_flush) depth *= extra_spacing;
-            if (need_wipe_tower || depth > EPSILON) {
-                float min_wipe_tower_depth = WipeTower::get_limit_depth_by_height(max_height);
-                depth = std::max((double) min_wipe_tower_depth, depth);
-            }
-            const_cast<Print *>(this)->m_wipe_tower_data.depth = depth;
-            const_cast<Print *>(this)->m_wipe_tower_data.brim_width = m_config.prime_tower_brim_width;
-        }
-        if (m_config.prime_tower_brim_width < 0) const_cast<Print *>(this)->m_wipe_tower_data.brim_width = WipeTower::get_auto_brim_by_height(max_height);
-    }
+    const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(m_config, this->wipe_tower_type(), this->extruders(true), layer_height, max_height);
+    WipeTowerData &data = const_cast<Print *>(this)->m_wipe_tower_data;
+    data.depth      = float(footprint.depth);
+    data.width      = float(footprint.width);
+    data.brim_width = float(footprint.brim_width);
     return m_wipe_tower_data;
 }
 
@@ -4290,6 +4652,7 @@ void Print::_make_wipe_tower()
         m_wipe_tower_data.tool_changes.reserve(m_wipe_tower_data.tool_ordering.layer_tools().size());
         wipe_tower.generate_new(m_wipe_tower_data.tool_changes);
         m_wipe_tower_data.depth      = wipe_tower.get_depth();
+        m_wipe_tower_data.width      = wipe_tower.width();
         m_wipe_tower_data.brim_width = wipe_tower.get_brim_width();
         m_wipe_tower_data.bbx = wipe_tower.get_bbx();
         m_wipe_tower_data.rib_offset = wipe_tower.get_rib_offset();
@@ -4403,6 +4766,7 @@ void Print::_make_wipe_tower()
         m_wipe_tower_data.tool_changes.reserve(m_wipe_tower_data.tool_ordering.layer_tools().size());
         wipe_tower.generate(m_wipe_tower_data.tool_changes);
         m_wipe_tower_data.depth             = wipe_tower.get_depth();
+        m_wipe_tower_data.width             = wipe_tower.width();
         m_wipe_tower_data.z_and_depth_pairs = wipe_tower.get_z_and_depth_pairs();
         m_wipe_tower_data.brim_width        = wipe_tower.get_brim_width();
         m_wipe_tower_data.height            = wipe_tower.get_wipe_tower_height();
@@ -4438,7 +4802,9 @@ void Print::_make_wipe_tower()
                                          wipe_tower.get_wipe_tower_height(), wipe_tower.get_brim_width(),
                                          config().wipe_tower_wall_type.value == WipeTowerWallType::wtwRib,
                                          wipe_tower.get_rib_width(), wipe_tower.get_rib_length(),
-                                         config().wipe_tower_fillet_wall.value);
+                                         config().wipe_tower_fillet_wall.value,
+                                         config().wipe_tower_wall_type.value == WipeTowerWallType::wtwCone ?
+                                             (float) config().wipe_tower_cone_angle.value : 0.f);
         const Vec3d origin                      = Vec3d::Zero();
         // FakeWipeTower::pos is a bed-frame translation applied after rotation
         // (getFakeExtrusionPathsFromWipeTower2 rotates about the local origin), so the
@@ -4451,6 +4817,28 @@ void Print::_make_wipe_tower()
                                                   config().wipe_tower_rotation_angle, config().wipe_tower_cone_angle,
                                                   {scale_(origin.x()), scale_(origin.y())});
     }
+
+    // The clamps and checks above work from estimates; re-test the exact generated footprint
+    // so an off-plate tower fails with a clear error instead of exporting unprintable G-code
+    // (validate() only sees the mesh on its next run).
+    if (m_wipe_tower_data.wipe_tower_mesh_data) {
+        Polygon footprint = m_wipe_tower_data.wipe_tower_mesh_data->bottom; // includes brim and rib offset
+        footprint.rotate(Geometry::deg2rad(m_config.wipe_tower_rotation_angle.value));
+        footprint.translate(Point(scale_(m_config.wipe_tower_x.get_at(m_plate_index)),
+                                  scale_(m_config.wipe_tower_y.get_at(m_plate_index))));
+        const Polygons printable_polys = this->get_extruder_shared_printable_polygon();
+        if (!printable_polys.empty() && !diff(Polygons{footprint}, printable_polys).empty()) {
+            const BoundingBox fp = get_extents(footprint);
+            const BoundingBox pr = get_extents(printable_polys);
+            BOOST_LOG_TRIVIAL(error) << boost::format("wipe tower footprint [%1%,%2%]-[%3%,%4%] leaves printable [%5%,%6%]-[%7%,%8%]") %
+                unscaled(fp.min.x()) % unscaled(fp.min.y()) % unscaled(fp.max.x()) % unscaled(fp.max.y()) %
+                unscaled(pr.min.x()) % unscaled(pr.min.y()) % unscaled(pr.max.x()) % unscaled(pr.max.y());
+            throw Slic3r::SlicingError(L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n"));
+        }
+        // The cutter/purge corner is a physical obstacle — the brim must stay out like the body.
+        if (!intersection(get_bed_excluded_area(m_config), Polygons{footprint}).empty())
+            throw Slic3r::SlicingError(L("Prime Tower") + L(" is too close to an exclusion area, and collisions will be caused.\n"));
+    }
 }
 
 // Generate a recommended G-code output file name based on the format template, default extension, and template parameters
@@ -5999,17 +6387,26 @@ ExtrusionLayers FakeWipeTower::getTrueExtrusionLayersFromWipeTower() const
     }
     return wtels;
 }
-void WipeTowerData::construct_mesh(float width, float depth, float height, float brim_width, bool is_rib_wipe_tower, float rib_width, float rib_length,bool fillet_wall)
+void WipeTowerData::construct_mesh(float width, float depth, float height, float brim_width, bool is_rib_wipe_tower, float rib_width, float rib_length,bool fillet_wall, float cone_angle)
 {
     wipe_tower_mesh_data = WipeTowerMeshData{};
     float first_layer_height=0.08; //brim height
     if (width < EPSILON || depth < EPSILON || height < EPSILON) return;
-    if (!is_rib_wipe_tower || rib_length < EPSILON) {
+    if (cone_angle > EPSILON && (!is_rib_wipe_tower || rib_length < EPSILON)) {
+        // Cone tower: the base bulges past the body box; this bottom polygon feeds the
+        // containment checks, so it must carry the bulge and the brim (cone not lofted).
+        wipe_tower_mesh_data->real_wipe_tower_mesh = make_cube(width, depth, height);
+        wipe_tower_mesh_data->bottom               = WipeTower2::cone_base_polygon(width, depth, height, cone_angle);
+        auto brim_bottom                           = offset(wipe_tower_mesh_data->bottom, scaled(brim_width));
+        if (!brim_bottom.empty())
+            wipe_tower_mesh_data->bottom = brim_bottom.front();
+        wipe_tower_mesh_data->real_brim_mesh = WipeTower::its_make_rib_brim(wipe_tower_mesh_data->bottom, first_layer_height);
+    } else if (!is_rib_wipe_tower || rib_length < EPSILON) {
         wipe_tower_mesh_data->real_wipe_tower_mesh = make_cube(width, depth, height);
         wipe_tower_mesh_data->real_brim_mesh       = make_cube(width + 2 * brim_width, depth + 2 * brim_width, first_layer_height);
         wipe_tower_mesh_data->real_brim_mesh.translate({-brim_width, -brim_width, 0});
-        wipe_tower_mesh_data->bottom = {scaled(Vec2f{-brim_width, -brim_width}), scaled(Vec2f{width + brim_width, 0}), scaled(Vec2f{width + brim_width, depth + brim_width}),
-                                        scaled(Vec2f{0, depth})};
+        wipe_tower_mesh_data->bottom = {scaled(Vec2f{-brim_width, -brim_width}), scaled(Vec2f{width + brim_width, -brim_width}),
+                                        scaled(Vec2f{width + brim_width, depth + brim_width}), scaled(Vec2f{-brim_width, depth + brim_width})};
     } else {
         wipe_tower_mesh_data->real_wipe_tower_mesh = WipeTower::its_make_rib_tower(width, depth, height, rib_length, rib_width, fillet_wall);
         wipe_tower_mesh_data->bottom               = WipeTower::rib_section(width, depth, rib_length, rib_width, fillet_wall);
diff --git a/src/libslic3r/Print.hpp b/src/libslic3r/Print.hpp
index 9e20061501..9c1782e047 100644
--- a/src/libslic3r/Print.hpp
+++ b/src/libslic3r/Print.hpp
@@ -782,6 +782,9 @@ struct WipeTowerData
 
     // Depth of the wipe tower to pass to GLCanvas3D for exact bounding box:
     float                                                 depth;
+    // Effective width (a rib wall squares the tower): the estimate until generation, then the
+    // generated width, so it never disagrees with depth.
+    float                                                 width;
     std::vector<std::pair<float, float>>                  z_and_depth_pairs;
     float                                                 brim_width;
     float                                                 height;
@@ -795,12 +798,13 @@ struct WipeTowerData
         used_filament.clear();
         number_of_toolchanges = -1;
         depth = 0.f;
+        width = 0.f;
         brim_width = 0.f;
         height = 0.f;
         rib_offset = Vec2f::Zero();
         wipe_tower_mesh_data  = std::nullopt;
     }
-    void construct_mesh(float width, float depth, float height, float brim_width, bool is_rib_wipe_tower, float rib_width, float rib_length, bool fillet_wall);
+    void construct_mesh(float width, float depth, float height, float brim_width, bool is_rib_wipe_tower, float rib_width, float rib_length, bool fillet_wall, float cone_angle = 0.f);
 
 private:
 	// Only allow the WipeTowerData to be instantiated internally by Print, 
@@ -1156,6 +1160,8 @@ public:
 
     //BBS
     static StringObjectException sequential_print_clearance_valid(const Print &print, Polygons *polygons = nullptr, std::vector<std::pair<Polygon, float>>* height_polygons = nullptr);
+    // Orca: pre-slice clearance check for a prime tower compacted by "No sparse layers".
+    static StringObjectException compacted_wipe_tower_clearance_valid(const Print &print, Polygons *polygons = nullptr, std::vector<std::pair<Polygon, float>>* height_polygons = nullptr);
     ConflictResultOpt            get_conflict_result() const { return m_conflict_result; }
 
     // Return 4 wipe tower corners in the world coordinates (shifted and rotated), including the wipe tower brim.
@@ -1170,6 +1176,8 @@ public:
     void set_calib_params(const Calib_Params& params);
     const Calib_Params& calib_params() const { return m_calib_params; }
     Vec2d translate_to_print_space(const Vec2d &point) const;
+    // Orca: precise counterpart of compacted_wipe_tower_clearance_valid(), run once the tower exists.
+    void                validate_compacted_wipe_tower_clearance() const;
     float               get_wipe_tower_depth() const { return m_wipe_tower_data.depth; }
     BoundingBoxf        get_wipe_tower_bbx() const { return m_wipe_tower_data.bbx; }
     Vec2f               get_rib_offset() const { return m_wipe_tower_data.rib_offset; }
@@ -1390,6 +1398,89 @@ public:
 };
 
 
+// ---------------------------------------------------------------------------------------------
+// Clearance rule for a prime tower compacted by wipe_tower_no_sparse_layers. Shared by the precise
+// check that runs on the real extrusions, the pre-slice estimate that feeds the plater with collision
+// polygons, and the plater's own live preview while the user drags the tower or an object around.
+// Keeping the rule in one place is what stops those three from drifting apart and reporting different
+// things for the same plate.
+// ---------------------------------------------------------------------------------------------
+
+// Half of a clearance distance, the share each of the two outlines carries. Sequential printing splits
+// extruder_clearance_radius between the two object hulls this way; the tower checks split their
+// clearances between the tower ring and the instance hull for the same reason, so that the two
+// outlines the plater draws touch precisely when the check trips. The 0.2 mm comes off first: it is
+// the rounding slack the sequential check applies, 0.1 mm per side.
+inline double compacted_tower_half_clearance(double clearance) { return 0.5 * (clearance - 0.2); }
+
+// Keep-out geometry a compacted tower projects onto the plate, derived from its bare footprint.
+struct CompactedTowerZone
+{
+    // Footprint the checks work on: the raw outline grown by the spiral Z-hop envelope.
+    Polygon     hull;
+    // hull grown by half the toolhead radius; an object whose own half-grown hull reaches into it is
+    // hit by the head body. This is also the ring the plater draws.
+    Polygons    grown_body;
+    // hull grown by half the bare nozzle cone radius, the innermost tier.
+    Polygons    grown_nozzle;
+    // hull bounding box, the Y band the rod sweeps.
+    BoundingBox bbox_rod;
+    // Full body clearance, of which grown_body carries half. Which of the two tiers applies is decided
+    // per object rather than here; see compacted_wipe_tower_clearance().
+    double      body_radius { 0. };
+
+    bool empty() const { return hull.points.empty(); }
+};
+
+// Per-side padding a bare wipe tower outline needs before the clearance checks may treat it as the
+// tower's footprint. Callers whose outline already carries the first-layer brim pass zero for it.
+// Shared by the pre-slice estimate and the plater's live preview: both start from an outline that
+// falls short of the printed tower in the same two ways, and padding them by different amounts is
+// exactly how the preview and the validation behind it would end up disagreeing.
+double compacted_tower_footprint_padding(const PrintConfig &config, double brim_width);
+
+// Grow a bare tower footprint (bed frame, scaled) into its keep-out zone.
+CompactedTowerZone compacted_wipe_tower_zone(const PrintConfig &config, const Polygon &tower_footprint);
+
+// How far an object may rise above the compacted tower base before the toolhead hits it.
+struct CompactedTowerClearance
+{
+    // Height the object may reach above the tower base. Zero means it may not rise at all.
+    double allowed_rise;
+    // Clearance that applies once the object stands clear of the toolhead in XY, i.e. rod or lid.
+    double far_clearance;
+    // The object sits within the toolhead radius, so the head body limits it rather than the rod.
+    bool   near_body;
+    // Horizontal clearance this particular object has to keep from the tower: the full toolhead
+    // radius once it rises past the nozzle cone, the bare cone while it stays below. It is what the
+    // error message quotes and what the plater grows the object outline by.
+    double body_clearance;
+};
+
+// object_rise is the height above the tower base that the caller is going to compare against
+// allowed_rise. It also selects the horizontal tier, so the two cannot disagree.
+CompactedTowerClearance compacted_wipe_tower_clearance(const PrintConfig &config, const CompactedTowerZone &zone,
+                                                      const Polygon &inst_hull, double object_rise);
+
+// This object was judged on a tier reaching past the bare nozzle cone, so the wide ring is the one its
+// outline has to be drawn against.
+inline bool compacted_tower_body_tier(const CompactedTowerClearance &clearance)
+{
+    return clearance.body_clearance > double(MAX_OUTER_NOZZLE_DIAMETER);
+}
+
+// Keep-out rings to draw around the tower. The nozzle one always applies; the wide body one is drawn
+// only when some object on the plate is actually measured against it, otherwise it would show a
+// keep-out zone no object can violate.
+Polygons compacted_wipe_tower_rings(const CompactedTowerZone &zone, bool any_body_tier);
+
+// Outline to hand the plater for an offending object: the instance hull grown by the same half
+// clearance the check grew it by, which is CompactedTowerClearance::body_clearance for that object.
+// Sequential printing reports its hulls the same way, and it doubles as the fix for the bare hull
+// being unusable on screen, where drawn flat it hides under the object and drawn at the height limit
+// it ends up buried inside the mesh.
+Polygon compacted_wipe_tower_offender_outline(const Polygon &inst_hull, double body_clearance);
+
 } /* slic3r_Print_hpp_ */
 
 #endif
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 1db476eede..02d1b50198 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2549,6 +2549,16 @@ void PrintConfigDef::init_fff_params()
     def->enum_labels.push_back("5");
     def->mode = comAdvanced;
 
+    // Orca: already carried by the BBL/Qidi/Geeetech/Eryone machine profiles, which inherited it from
+    // the BambuStudio import; without a definition here it was parsed as an unknown key and dropped.
+    def = this->add("extruder_clearance_dist_to_rod", coFloat);
+    def->label = L("Distance to rod");
+    def->tooltip = L("Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing.");
+    def->sidetext = L("mm");	// millimeters, CIS languages need translation
+    def->min = 0;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionFloat(40));
+
     def = this->add("extruder_clearance_height_to_rod", coFloat);
     def->label = L("Height to rod");
     def->tooltip = L("Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing.");
@@ -5430,7 +5440,7 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->readonly = false;
     def->nullable = true;
-    def->set_default_value(new ConfigOptionFloatsNullable { {0.0} });
+    def->set_default_value(new ConfigOptionFloatsNullable { 0.0 });
 
     def = this->add("cooling_tube_retraction", coFloat);
     def->label = L("Cooling tube position");
@@ -5537,6 +5547,16 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(true));
 
+    def = this->add("unsupported_wall_last", coBool);
+    def->label = L("Print unsupported walls last");
+    def->category = L("Quality");
+    def->tooltip = L("Wall loops that lie entirely in mid air are printed once something can hold them:\n"
+                     "they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n"
+                     "A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running "
+                     "alongside a supported wall keeps its place before the infill, which needs it as an anchor.");
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("outer_wall_filament_id", coInt);
     def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
     def->label = L("Outer walls");
@@ -6267,6 +6287,36 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(false));
 
+    def = this->add("wipe_inward", coBool);
+    def->label = L("Wipe inward");
+    def->category = L("Quality");
+    def->tooltip = L("Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed "
+                     "inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n\n"
+                     "Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n\n"
+                     "Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or "
+                     "Outer/Inner wall order), or if no supported inward path can be found, for example at tight "
+                     "corners or seam gaps.");
+    def->mode = comExpert;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("wipe_inward_distance", coFloatOrPercent);
+    def->label = L("Wipe inward distance");
+    def->category = L("Quality");
+    // xgettext:no-c-format, no-boost-format
+    def->tooltip = L("The distance the wipe path is shifted away from the external perimeter, specified in millimeters "
+                     "or as a percentage of the actual outer-wall extrusion width.\n\n"
+                     "For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited "
+                     "by both the actual outer-wall width and the available spacing to the adjacent wall, so values "
+                     "above 100% or an equivalent absolute distance have no additional effect. "
+                     "Set to 0 to disable the offset.");
+    def->sidetext = L("mm or %");
+    def->ratio_over = "outer_wall_line_width";
+    def->min = 0;
+    def->max = 100;
+    def->max_literal = 2; // Orca: G-code generation also clamps literal values to the actual outer-wall width.
+    def->mode = comExpert;
+    def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
+
     def = this->add("wipe_before_external_loop", coBool);
     def->label = L("Wipe before external loop");
     def->category = L("Quality");
@@ -6644,8 +6694,10 @@ void PrintConfigDef::init_fff_params()
     def = this->add("wipe_tower_no_sparse_layers", coBool);
     def->label = L("No sparse layers (beta)");
     def->tooltip = L("If enabled, the wipe tower will not be printed on layers with no tool changes. "
-                    "On layers with a tool change, extruder will travel downward to print the wipe tower. "
-                    "User is responsible for ensuring there is no collision with the print.");
+                    "On layers with a tool change, extruder will travel downward to print the wipe tower, "
+                    "so the tower ends up below the model and the toolhead has to reach down to it. "
+                    "Layouts where that would collide with an already printed object are rejected. "
+                    "Has no effect with smooth timelapse or clumping detection, which need a tower on every layer.");
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(false));
 
@@ -6671,6 +6723,34 @@ void PrintConfigDef::init_fff_params()
     def->enum_labels.emplace_back(L("Cyclic"));
     def->set_default_value(new ConfigOptionEnum<ToolChangeOrderingType>(ToolChangeOrderingType::Default));
 
+    def = this->add("toolchange_cyclic_order", coString);
+    def->label = L("Cyclic order");
+    def->category = L("Advanced");
+    def->tooltip = L(
+        "Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n"
+        "Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n"
+        "Leave empty to cycle through the filaments in ascending order."
+    );
+    def->mode = comExpert;
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("toolchange_cyclic_first_layer", coBool);
+    def->label = L("Apply cyclic order to first layer");
+    def->category = L("Advanced");
+    def->tooltip = L(
+        "Applies the cyclic toolchange order to the first layer as well.\n"
+        "By default this is disabled, because the first layer is instead ordered for the best bed "
+        "adhesion: filaments that print small, fragile first-layer features are printed last, so the "
+        "following tool changes and travel moves are less likely to knock those weakly anchored parts "
+        "loose. This first-layer order also honors a custom first layer filament sequence when one is set. "
+        "The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply "
+        "to the first layer, which is printed slowly and hot for adhesion.\n"
+        "Enable this only if you need the exact same tool sequence on every layer, including the first, at "
+        "the cost of that adhesion optimization."
+    );
+    def->mode = comExpert;
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("slice_closing_radius", coFloat);
     def->label = L("Slice gap closing radius");
     def->category = L("Quality");
@@ -6683,7 +6763,7 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("slicing_mode", coEnum);
     def->label = L("Slicing Mode");
-    def->category = L("Other");
+    def->category = L("Others");
     def->tooltip = L("Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model.");
     def->enum_keys_map = &ConfigOptionEnum<SlicingMode>::get_enum_values();
     def->enum_values.push_back("regular");
@@ -10936,6 +11016,28 @@ std::vector<int> DynamicPrintConfig::update_values_to_printer_extruders(DynamicP
     return variant_index;
 }
 
+// Regathers a vector option's values through per-slot source indices (one input index per
+// output slot). Out-of-range indices keep the first value, matching get_at's fallback.
+template<typename OptType, typename ValueType>
+static void gather_option_values(const char *caller, const std::string &key, OptType *opt, const std::vector<int> &slot_param_indices)
+{
+    if (!opt || opt->values.empty()) {
+        BOOST_LOG_TRIVIAL(warning) << caller << boost::format(", Line %1%: option %2% not found or empty, skipping")%__LINE__%key;
+        return;
+    }
+    std::vector<ValueType> new_values;
+    new_values.reserve(slot_param_indices.size());
+    for (int idx : slot_param_indices) {
+        if (idx < 0 || static_cast<size_t>(idx) >= opt->values.size()) {
+            BOOST_LOG_TRIVIAL(warning) << caller << boost::format(", Line %1%: option %2% slot index %3% out of range, keeping first value")%__LINE__%key%idx;
+            new_values.emplace_back(opt->values.front());
+        }
+        else
+            new_values.emplace_back(opt->values[idx]);
+    }
+    opt->values = std::move(new_values);
+}
+
 void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filaments(DynamicPrintConfig& printer_config, int extruder_count, int extruder_nozzle_volume_count, std::set<std::string>& key_set, std::string id_name, std::string variant_name)
 {
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(", Line %1%: extruder_count %2%, extruder_nozzle_volume_count %3%")%__LINE__ %extruder_count %extruder_nozzle_volume_count;
@@ -11013,155 +11115,18 @@ void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filamen
                 BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: can not find opt define for %2%")%__LINE__%key;
                 continue;
             }
+            // An empty option has no first value to fall back on; give it one registered default per filament.
+            if (auto *vec = dynamic_cast<ConfigOptionVectorBase*>(this->option(key)); vec && vec->empty() && optdef->default_value)
+                vec->resize(filament_count, optdef->default_value.get());
 
             switch (optdef->type) {
-                case coStrings:
-                {
-                    ConfigOptionStrings * opt = this->option<ConfigOptionStrings>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<std::string> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coInts:
-                {
-                    ConfigOptionInts * opt = this->option<ConfigOptionInts>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<int> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coFloats:
-                {
-                    ConfigOptionFloats * opt = this->option<ConfigOptionFloats>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<double> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coPercents:
-                {
-                    ConfigOptionPercents * opt = this->option<ConfigOptionPercents>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<double> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coFloatsOrPercents:
-                {
-                    ConfigOptionFloatsOrPercents * opt = this->option<ConfigOptionFloatsOrPercents>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<FloatOrPercent> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coBools:
-                {
-                    ConfigOptionBools * opt = this->option<ConfigOptionBools>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<unsigned char> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
-                case coEnums:
-                {
-                    ConfigOptionEnumsGeneric * opt = this->option<ConfigOptionEnumsGeneric>(key);
-                    if (!opt) {
-                        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found, skipping")%__LINE__%key;
-                        break;
-                    }
-                    std::vector<int> new_values;
-
-                    new_values.resize(filament_count);
-                    for (int f_index = 0; f_index < filament_count; f_index++)
-                    {
-                        if (variant_index[f_index] < 0 || static_cast<size_t>(variant_index[f_index]) >= opt->size()) {
-                            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% variant index %3% out of range, skipping")%__LINE__%key%variant_index[f_index];
-                            continue;
-                        }
-                        new_values[f_index] = opt->get_at(variant_index[f_index]);
-                    }
-                    opt->values = new_values;
-                    break;
-                }
+                case coStrings:          gather_option_values<ConfigOptionStrings, std::string>(__FUNCTION__, key, this->option<ConfigOptionStrings>(key), variant_index); break;
+                case coInts:             gather_option_values<ConfigOptionInts, int>(__FUNCTION__, key, this->option<ConfigOptionInts>(key), variant_index); break;
+                case coFloats:           gather_option_values<ConfigOptionFloats, double>(__FUNCTION__, key, this->option<ConfigOptionFloats>(key), variant_index); break;
+                case coPercents:         gather_option_values<ConfigOptionPercents, double>(__FUNCTION__, key, this->option<ConfigOptionPercents>(key), variant_index); break;
+                case coFloatsOrPercents: gather_option_values<ConfigOptionFloatsOrPercents, FloatOrPercent>(__FUNCTION__, key, this->option<ConfigOptionFloatsOrPercents>(key), variant_index); break;
+                case coBools:            gather_option_values<ConfigOptionBools, unsigned char>(__FUNCTION__, key, this->option<ConfigOptionBools>(key), variant_index); break;
+                case coEnums:            gather_option_values<ConfigOptionEnumsGeneric, int>(__FUNCTION__, key, this->option<ConfigOptionEnumsGeneric>(key), variant_index); break;
                 default:
                     BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: unsupported option type for %2%")%__LINE__%key;
                     break;
@@ -11180,28 +11145,6 @@ void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filamen
     }
 }
 
-// Regathers a vector option's values through per-slot source indices (one input index per
-// output slot). Out-of-range indices keep the first value, matching get_at's fallback.
-template<typename OptType, typename ValueType>
-static void gather_option_values(const std::string &key, OptType *opt, const std::vector<int> &slot_param_indices)
-{
-    if (!opt || opt->values.empty()) {
-        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% not found or empty, skipping")%__LINE__%key;
-        return;
-    }
-    std::vector<ValueType> new_values;
-    new_values.reserve(slot_param_indices.size());
-    for (int idx : slot_param_indices) {
-        if (idx < 0 || static_cast<size_t>(idx) >= opt->values.size()) {
-            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: option %2% slot index %3% out of range, keeping first value")%__LINE__%key%idx;
-            new_values.emplace_back(opt->values.front());
-        }
-        else
-            new_values.emplace_back(opt->values[idx]);
-    }
-    opt->values = std::move(new_values);
-}
-
 void DynamicPrintConfig::update_filament_config_values_for_multiple_extruders(DynamicPrintConfig& printer_config,
     const std::unordered_map<int, std::vector<FilamentVariantUse>>& filament_variant_uses,
     int extruder_count, int extruder_nozzle_volume_count,
@@ -11296,13 +11239,13 @@ void DynamicPrintConfig::update_filament_config_values_for_multiple_extruders(Dy
             continue;
         }
         switch (optdef->type) {
-            case coStrings:          gather_option_values<ConfigOptionStrings, std::string>(key, this->option<ConfigOptionStrings>(key), slot_param_indices); break;
-            case coInts:             gather_option_values<ConfigOptionInts, int>(key, this->option<ConfigOptionInts>(key), slot_param_indices); break;
-            case coFloats:           gather_option_values<ConfigOptionFloats, double>(key, this->option<ConfigOptionFloats>(key), slot_param_indices); break;
-            case coPercents:         gather_option_values<ConfigOptionPercents, double>(key, this->option<ConfigOptionPercents>(key), slot_param_indices); break;
-            case coFloatsOrPercents: gather_option_values<ConfigOptionFloatsOrPercents, FloatOrPercent>(key, this->option<ConfigOptionFloatsOrPercents>(key), slot_param_indices); break;
-            case coBools:            gather_option_values<ConfigOptionBools, unsigned char>(key, this->option<ConfigOptionBools>(key), slot_param_indices); break;
-            case coEnums:            gather_option_values<ConfigOptionEnumsGeneric, int>(key, this->option<ConfigOptionEnumsGeneric>(key), slot_param_indices); break;
+            case coStrings:          gather_option_values<ConfigOptionStrings, std::string>(__FUNCTION__, key, this->option<ConfigOptionStrings>(key), slot_param_indices); break;
+            case coInts:             gather_option_values<ConfigOptionInts, int>(__FUNCTION__, key, this->option<ConfigOptionInts>(key), slot_param_indices); break;
+            case coFloats:           gather_option_values<ConfigOptionFloats, double>(__FUNCTION__, key, this->option<ConfigOptionFloats>(key), slot_param_indices); break;
+            case coPercents:         gather_option_values<ConfigOptionPercents, double>(__FUNCTION__, key, this->option<ConfigOptionPercents>(key), slot_param_indices); break;
+            case coFloatsOrPercents: gather_option_values<ConfigOptionFloatsOrPercents, FloatOrPercent>(__FUNCTION__, key, this->option<ConfigOptionFloatsOrPercents>(key), slot_param_indices); break;
+            case coBools:            gather_option_values<ConfigOptionBools, unsigned char>(__FUNCTION__, key, this->option<ConfigOptionBools>(key), slot_param_indices); break;
+            case coEnums:            gather_option_values<ConfigOptionEnumsGeneric, int>(__FUNCTION__, key, this->option<ConfigOptionEnumsGeneric>(key), slot_param_indices); break;
             default:
                 BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", Line %1%: unsupported option type for %2%")%__LINE__%key;
                 break;
@@ -12031,6 +11974,19 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->tooltip = L("Do not run any validity checks, such as G-code path conflicts check.");
     def->set_default_value(new ConfigOptionBool(false));
 
+    // --strict turns the non-critical slicing warnings the CLI otherwise only logs into a
+    // failed run, and records strict_mode in result.json so consumers can tell the modes apart.
+    def = this->add("strict", coBool);
+    def->label = L("Strict mode");
+    def->tooltip = L("Exit non-zero when slicing raises a non-critical warning that is "
+                     "otherwise only logged, such as a model that needs support while "
+                     "support is disabled. Use this in CI or scripted pipelines that should "
+                     "never ship a subtly broken slice. Each such warning is also listed "
+                     "with a stable class in the `warnings` array of result.json, which is "
+                     "written on Linux only. Cannot be combined with --no-check, which skips "
+                     "the support check.");
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("normative_check", coBool);
     def->label = L("Normative check");
     def->tooltip = L("Check the normative items.");
@@ -12051,9 +12007,29 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->tooltip = L("This outputs the model\u2019s information.");
     def->set_default_value(new ConfigOptionBool(false));
 
+    def = this->add("inspect_mesh", coBool);
+    def->label = L("Inspect mesh (JSON to stdout)");
+    def->tooltip = L("Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the "
+                     "convex hull faces it can be laid on, with their normals, areas and centers. These are the faces "
+                     "the --ground-* options choose from. Machine-readable alternative to --info.");
+    def->set_default_value(new ConfigOptionBool(false));
+
+    // --inspect-paint \u2014 dump the per-facet enforcer/blocker/extruder/fuzzy
+    // paint state stored on the loaded model (supports, seam, MMU color,
+    // fuzzy-skin) as JSON. Read-only; lets CI / scripted / AI tooling
+    // reason about existing paint on a .3mf without loading the GUI.
+    def = this->add("inspect_paint", coBool);
+    def->label = L("Inspect paint (JSON to stdout)");
+    def->tooltip = L("Print a structured JSON summary of every painted layer "
+                     "(supports, seam, MMU color, fuzzy-skin) already stored on "
+                     "the loaded model \u2014 per-state facet count, surface area, "
+                     "and mesh-local bounding box \u2014 then exit. Machine-readable "
+                     "alternative to opening the paint gizmos in the GUI.");
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("export_settings", coString);
     def->label = L("Export Settings");
-    def->tooltip = L("This exports settings to a file.");
+    def->tooltip = L("This exports settings to a file. Use - to write them to stdout.");
     def->cli_params = "settings.json";
     def->set_default_value(new ConfigOptionString("output.json"));
 
@@ -12170,6 +12146,34 @@ CLITransformConfigDef::CLITransformConfigDef()
     def->sidetext = u8"°";	// degrees, don't need translation
     def->set_default_value(new ConfigOptionFloat(0));
 
+    // The --ground-* options choose from the faces the "Lay on Face" gizmo offers. Like the other
+    // transforms they run in command-line order, so they see the rotations given before them.
+    def = this->add("ground_largest_face", coBool);
+    def->label = L("Ground largest face");
+    def->tooltip = L("Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large "
+                     "faces, the one already facing down is kept. Objects without a face large enough to rest on are left "
+                     "as they are. Transforms run in command-line order, so rotations given before this option are respected. "
+                     "--orient 1 runs after all transforms and replaces the orientation.");
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("ground_face_normal", coString);
+    def->label = L("Ground face by normal");
+    def->tooltip = L("Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ "
+                     "and drop it onto the bed. The direction is in object coordinates, which include the rotations given "
+                     "before this option and match the plate axes unless the input file rotates the object. For example, "
+                     "1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation.");
+    def->cli_params = "NX,NY,NZ";
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("ground_face_point", coString);
+    def->label = L("Ground face at point");
+    def->tooltip = L("Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. "
+                     "The point is in object coordinates, which include the rotations given before this option; "
+                     "--inspect-mesh reports face centers in them. Objects without such a face are left as they are, and "
+                     "the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation.");
+    def->cli_params = "X,Y,Z";
+    def->set_default_value(new ConfigOptionString(""));
+
     def = this->add("scale", coFloat);
     def->label = L("Scale");
     def->tooltip = L("Scale the model by a float factor.");
diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index f7cbe8b2e5..727246ef73 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -1011,41 +1011,46 @@ public: \
         { PrintConfigDef::handle_legacy(opt_key, value); }
 
 #define PRINT_CONFIG_CLASS_ELEMENT_DEFINITION(r, data, elem) BOOST_PP_TUPLE_ELEM(0, elem) BOOST_PP_TUPLE_ELEM(1, elem);
-#define PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION2(KEY) cache.opt_add(BOOST_PP_STRINGIZE(KEY), base_ptr, this->KEY);
-#define PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION(r, data, elem) PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION2(BOOST_PP_TUPLE_ELEM(1, elem))
-#define PRINT_CONFIG_CLASS_ELEMENT_HASH(r, data, elem) boost::hash_combine(seed, BOOST_PP_TUPLE_ELEM(1, elem).hash());
-#define PRINT_CONFIG_CLASS_ELEMENT_EQUAL(r, data, elem) if (! (BOOST_PP_TUPLE_ELEM(1, elem) == rhs.BOOST_PP_TUPLE_ELEM(1, elem))) return false;
-#define PRINT_CONFIG_CLASS_ELEMENT_LOWER(r, data, elem) \
-        if (BOOST_PP_TUPLE_ELEM(1, elem) < rhs.BOOST_PP_TUPLE_ELEM(1, elem)) return true; \
-        if (! (BOOST_PP_TUPLE_ELEM(1, elem) == rhs.BOOST_PP_TUPLE_ELEM(1, elem))) return false;
+#define PRINT_CONFIG_CLASS_ELEMENT_VISIT(r, data, elem) if (! f(BOOST_PP_STRINGIZE(BOOST_PP_TUPLE_ELEM(1, elem)), this->BOOST_PP_TUPLE_ELEM(1, elem), rhs.BOOST_PP_TUPLE_ELEM(1, elem))) return;
+// Each option list is expanded into the members and again into for_each_option_pair(), which calls
+// f(key, this->option, rhs.option) in declaration order and stops when f returns false. hash(),
+// operator==, operator< and initialize() iterate the options through that visitor.
+#define PRINT_CONFIG_CLASS_COMMON_BODY(CLASS_NAME) \
+    size_t hash() const throw() \
+    { \
+        size_t seed = 0; \
+        this->for_each_option_pair(*this, [&seed](const char*, const auto &a, const auto&) { boost::hash_combine(seed, a.hash()); return true; }); \
+        return seed; \
+    } \
+    bool operator==(const CLASS_NAME &rhs) const throw() \
+    { \
+        bool eq = true; \
+        this->for_each_option_pair(rhs, [&eq](const char*, const auto &a, const auto &b) { eq = (a == b); return eq; }); \
+        return eq; \
+    } \
+    bool operator!=(const CLASS_NAME &rhs) const throw() { return ! (*this == rhs); } \
+    bool operator<(const CLASS_NAME &rhs) const throw() \
+    { \
+        int c = 0; \
+        this->for_each_option_pair(rhs, [&c](const char*, const auto &a, const auto &b) { if (a < b) c = -1; else if (! (a == b)) c = 1; return c == 0; }); \
+        return c < 0; \
+    } \
+protected: \
+    void initialize(StaticCacheBase &cache, const char *base_ptr) \
+    { \
+        this->for_each_option_pair(*this, [&cache, base_ptr](const char *key, const auto &a, const auto&) { cache.opt_add(key, base_ptr, a); return true; }); \
+    }
 
 #define PRINT_CONFIG_CLASS_DEFINE(CLASS_NAME, PARAMETER_DEFINITION_SEQ) \
 class CLASS_NAME : public StaticPrintConfig { \
     STATIC_PRINT_CONFIG_CACHE(CLASS_NAME) \
 public: \
     BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_DEFINITION, _, PARAMETER_DEFINITION_SEQ) \
-    size_t hash() const throw() \
+    template<typename F> void for_each_option_pair(const CLASS_NAME &rhs, F &&f) const \
     { \
-        size_t seed = 0; \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_HASH, _, PARAMETER_DEFINITION_SEQ) \
-        return seed; \
-    } \
-    bool operator==(const CLASS_NAME &rhs) const throw() \
-    { \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_EQUAL, _, PARAMETER_DEFINITION_SEQ) \
-        return true; \
-    } \
-    bool operator!=(const CLASS_NAME &rhs) const throw() { return ! (*this == rhs); } \
-    bool operator<(const CLASS_NAME &rhs) const throw() \
-    { \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_LOWER, _, PARAMETER_DEFINITION_SEQ) \
-        return false; \
-    } \
-protected: \
-    void initialize(StaticCacheBase &cache, const char *base_ptr) \
-    { \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION, _, PARAMETER_DEFINITION_SEQ) \
+        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_VISIT, _, PARAMETER_DEFINITION_SEQ) \
     } \
+    PRINT_CONFIG_CLASS_COMMON_BODY(CLASS_NAME) \
 };
 
 #define PRINT_CONFIG_CLASS_DERIVED_CLASS_LIST_ITEM(r, data, i, elem) BOOST_PP_COMMA_IF(i) public elem
@@ -1059,43 +1064,43 @@ protected: \
     if (! (*static_cast<const elem*>(this) == static_cast<const elem&>(rhs))) return false;
 
 // Generic version, with or without new parameters. Don't use this directly.
-#define PRINT_CONFIG_CLASS_DERIVED_DEFINE1(CLASS_NAME, CLASSES_PARENTS_TUPLE, PARAMETER_DEFINITION, PARAMETER_REGISTRATION, PARAMETER_HASHES, PARAMETER_EQUALS) \
+#define PRINT_CONFIG_CLASS_DERIVED_DEFINE1(CLASS_NAME, CLASSES_PARENTS_TUPLE, PARAMETER_DEFINITION, PARAMETER_VISIT) \
 class CLASS_NAME : PRINT_CONFIG_CLASS_DERIVED_CLASS_LIST(CLASSES_PARENTS_TUPLE) { \
     STATIC_PRINT_CONFIG_CACHE_DERIVED(CLASS_NAME) \
     CLASS_NAME() : PRINT_CONFIG_CLASS_DERIVED_INITIALIZER(CLASSES_PARENTS_TUPLE, 0) { assert(s_cache_##CLASS_NAME.initialized()); *this = s_cache_##CLASS_NAME.defaults(); } \
 public: \
     PARAMETER_DEFINITION \
+    template<typename F> void for_each_option_pair(const CLASS_NAME &rhs, F &&f) const { PARAMETER_VISIT } \
     size_t hash() const throw() \
     { \
         size_t seed = 0; \
         BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_DERIVED_HASH, _, BOOST_PP_TUPLE_TO_SEQ(CLASSES_PARENTS_TUPLE)) \
-        PARAMETER_HASHES \
+        this->for_each_option_pair(*this, [&seed](const char*, const auto &a, const auto&) { boost::hash_combine(seed, a.hash()); return true; }); \
         return seed; \
     } \
     bool operator==(const CLASS_NAME &rhs) const throw() \
     { \
         BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_DERIVED_EQUAL, _, BOOST_PP_TUPLE_TO_SEQ(CLASSES_PARENTS_TUPLE)) \
-        PARAMETER_EQUALS \
-        return true; \
+        bool eq = true; \
+        this->for_each_option_pair(rhs, [&eq](const char*, const auto &a, const auto &b) { eq = (a == b); return eq; }); \
+        return eq; \
     } \
     bool operator!=(const CLASS_NAME &rhs) const throw() { return ! (*this == rhs); } \
 protected: \
     CLASS_NAME(int) : PRINT_CONFIG_CLASS_DERIVED_INITIALIZER(CLASSES_PARENTS_TUPLE, 1) {} \
     void initialize(StaticCacheBase &cache, const char* base_ptr) { \
         PRINT_CONFIG_CLASS_DERIVED_INITCACHE(CLASSES_PARENTS_TUPLE) \
-        PARAMETER_REGISTRATION \
+        this->for_each_option_pair(*this, [&cache, base_ptr](const char *key, const auto &a, const auto&) { cache.opt_add(key, base_ptr, a); return true; }); \
     } \
 };
 // Variant without adding new parameters.
 #define PRINT_CONFIG_CLASS_DERIVED_DEFINE0(CLASS_NAME, CLASSES_PARENTS_TUPLE) \
-    PRINT_CONFIG_CLASS_DERIVED_DEFINE1(CLASS_NAME, CLASSES_PARENTS_TUPLE, BOOST_PP_EMPTY(), BOOST_PP_EMPTY(), BOOST_PP_EMPTY(), BOOST_PP_EMPTY())
+    PRINT_CONFIG_CLASS_DERIVED_DEFINE1(CLASS_NAME, CLASSES_PARENTS_TUPLE, BOOST_PP_EMPTY(), BOOST_PP_EMPTY())
 // Variant with adding new parameters.
 #define PRINT_CONFIG_CLASS_DERIVED_DEFINE(CLASS_NAME, CLASSES_PARENTS_TUPLE, PARAMETER_DEFINITION_SEQ) \
     PRINT_CONFIG_CLASS_DERIVED_DEFINE1(CLASS_NAME, CLASSES_PARENTS_TUPLE, \
         BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_DEFINITION, _, PARAMETER_DEFINITION_SEQ), \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION, _, PARAMETER_DEFINITION_SEQ), \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_HASH, _, PARAMETER_DEFINITION_SEQ), \
-        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_EQUAL, _, PARAMETER_DEFINITION_SEQ))
+        BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CLASS_ELEMENT_VISIT, _, PARAMETER_DEFINITION_SEQ))
 
 // This object is mapped to Perl as Slic3r::Config::PrintObject.
 PRINT_CONFIG_CLASS_DEFINE(
@@ -1348,6 +1353,7 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionFloatsNullable, filament_ironing_speed))
     // Detect bridging perimeters
     ((ConfigOptionBool, detect_overhang_wall))
+    ((ConfigOptionBool, unsupported_wall_last))
     ((ConfigOptionInt, outer_wall_filament_id))
     ((ConfigOptionInt, inner_wall_filament_id))
     ((ConfigOptionFloatOrPercent, inner_wall_line_width))
@@ -1386,6 +1392,8 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionBool,                 role_based_wipe_speed))
     ((ConfigOptionFloatOrPercent,       wipe_speed))
     ((ConfigOptionBool,                 wipe_on_loops))
+    ((ConfigOptionBool,                 wipe_inward))
+    ((ConfigOptionFloatOrPercent,        wipe_inward_distance))
     ((ConfigOptionBool,                 wipe_before_external_loop))
     ((ConfigOptionEnum<WallInfillOrder>, wall_infill_order))
     ((ConfigOptionBool,                 precise_outer_wall))
@@ -1620,6 +1628,8 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionBool,                manual_filament_change))
     ((ConfigOptionBool,                single_extruder_multi_material_priming))
     ((ConfigOptionEnum<ToolChangeOrderingType>, toolchange_ordering))
+    ((ConfigOptionString,              toolchange_cyclic_order))
+    ((ConfigOptionBool,                toolchange_cyclic_first_layer))
     ((ConfigOptionBool,                wipe_tower_no_sparse_layers))
     ((ConfigOptionString,              change_filament_gcode))
     ((ConfigOptionString,              change_extrusion_role_gcode))
@@ -1781,6 +1791,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionBools,              slow_down_for_layer_cooling))
     ((ConfigOptionInts,               close_fan_the_first_x_layers))
     ((ConfigOptionEnum<DraftShield>,  draft_shield))
+    ((ConfigOptionFloat,              extruder_clearance_dist_to_rod))//BBS
     ((ConfigOptionFloat,              extruder_clearance_height_to_rod))//BBs
     ((ConfigOptionFloat,              extruder_clearance_height_to_lid))//BBS
     ((ConfigOptionFloat,              extruder_clearance_radius))
@@ -2148,11 +2159,8 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE0(
 #undef STATIC_PRINT_CONFIG_CACHE_BASE
 #undef STATIC_PRINT_CONFIG_CACHE_DERIVED
 #undef PRINT_CONFIG_CLASS_ELEMENT_DEFINITION
-#undef PRINT_CONFIG_CLASS_ELEMENT_EQUAL
-#undef PRINT_CONFIG_CLASS_ELEMENT_LOWER
-#undef PRINT_CONFIG_CLASS_ELEMENT_HASH
-#undef PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION
-#undef PRINT_CONFIG_CLASS_ELEMENT_INITIALIZATION2
+#undef PRINT_CONFIG_CLASS_ELEMENT_VISIT
+#undef PRINT_CONFIG_CLASS_COMMON_BODY
 #undef PRINT_CONFIG_CLASS_DEFINE
 #undef PRINT_CONFIG_CLASS_DERIVED_CLASS_LIST
 #undef PRINT_CONFIG_CLASS_DERIVED_CLASS_LIST_ITEM
diff --git a/src/libslic3r/PrintObject.cpp b/src/libslic3r/PrintObject.cpp
index a228bb7436..3b7e889472 100644
--- a/src/libslic3r/PrintObject.cpp
+++ b/src/libslic3r/PrintObject.cpp
@@ -21,9 +21,11 @@
 #include "TriangleMeshSlicer.hpp"
 #include "Utils.hpp"
 #include "Fill/FillAdaptive.hpp"
+#include "Fill/Fill.hpp"
 #include "Fill/FillLightning.hpp"
 #include "Format/STL.hpp"
 #include "format.hpp"
+#include "AABBTreeIndirect.hpp"
 #include "AABBTreeLines.hpp"
 
 #include <cstddef>
@@ -672,6 +674,98 @@ void PrintObject::prepare_infill()
     } // for each region
 #endif /* SLIC3R_DEBUG_SLICE_PROCESSING */
 
+    // Orca: precompute the object's 3D connected bodies for separated infills / per-model
+    // centering. Two islands belong to the same body when their slices overlap on adjacent
+    // layers; islands that only overlap in top-down projection but never touch (e.g. interleaved
+    // chain links) stay separate, matching "split to objects". Each layer island then records
+    // the full bounding box of its body, so its infill is centered on that body as if it were
+    // sliced alone. Compute this before bridges so anchors and extrusion share the same origin.
+    bool needs_separated_components = false;
+    for (size_t i = 0; i < this->num_printing_regions(); ++ i) {
+        const PrintRegionConfig &rc = this->printing_region(i).config();
+        if (rc.separated_infills || rc.center_of_surface_pattern == CenterOfSurfacePattern::Each_Model) {
+            needs_separated_components = true;
+            break;
+        }
+    }
+    // Orca: Fast path: the feature only changes anything when the object is made of more than one
+    // connected body. Detect that cheaply the same way as "Split to objects" — more than one
+    // model part, or a single part whose mesh is splittable (is_splittable() is cached). A single
+    // body already shares the object center, i.e. the default, so skip the connectivity pass.
+    if (needs_separated_components) {
+        int                parts      = 0;
+        const ModelVolume *first_part = nullptr;
+        for (const ModelVolume *v : this->model_object()->volumes)
+            if (v->is_model_part()) { ++ parts; first_part = v; }
+        if (parts <= 1 && ! (first_part != nullptr && first_part->is_splittable()))
+            needs_separated_components = false;
+    }
+    for (Layer *layer : m_layers)
+        layer->lslices_separated_component_bboxes.clear();
+    if (needs_separated_components) {
+        const size_t        nl = m_layers.size();
+        std::vector<size_t> offset(nl + 1, 0); // Orca: flat index of the first island of each layer
+        for (size_t i = 0; i < nl; ++ i)
+            offset[i + 1] = offset[i] + m_layers[i]->lslices.size();
+        const size_t nreg = offset[nl];
+        // Orca: Union-find over every (layer, island).
+        std::vector<size_t> parent(nreg);
+        for (size_t i = 0; i < nreg; ++ i) parent[i] = i;
+        auto find = [&parent](size_t x) {
+            while (parent[x] != x) { parent[x] = parent[parent[x]]; x = parent[x]; }
+            return x;
+        };
+        auto unite = [&](size_t a, size_t b) { a = find(a); b = find(b); if (a != b) parent[a] = b; };
+        // Orca: Index the smaller of two consecutive layers instead of scanning every
+        // pair of islands. The tree prunes distant boxes on fragmented models; exact
+        // polygon intersections still decide connectivity for the remaining candidates.
+        for (size_t i = 0; i + 1 < nl; ++ i) {
+            m_print->throw_if_canceled();
+            size_t layer_a = i, layer_b = i + 1;
+            if (m_layers[layer_a]->lslices.size() < m_layers[layer_b]->lslices.size())
+                std::swap(layer_a, layer_b);
+            const Layer *la = m_layers[layer_a], *lb = m_layers[layer_b];
+            if (lb->lslices.empty())
+                continue;
+
+            using IslandTree = AABBTreeIndirect::Tree<2, coord_t>;
+            std::vector<AABBTreeIndirect::BoundingBoxWrapper> bboxes;
+            bboxes.reserve(lb->lslices.size());
+            for (size_t b = 0; b < lb->lslices.size(); ++ b)
+                bboxes.emplace_back(b, lb->lslices_bboxes[b]);
+            IslandTree tree;
+            tree.build_modify_input(bboxes);
+            for (size_t a = 0; a < la->lslices.size(); ++ a) {
+                const IslandTree::BoundingBox query(la->lslices_bboxes[a].min, la->lslices_bboxes[a].max);
+                AABBTreeIndirect::traverse(tree,
+                    [&query](const IslandTree::Node &node) { return node.bbox.intersects(query); },
+                    [&](const IslandTree::Node &node) {
+                        const size_t b = node.idx;
+                        // Orca: Tree boxes include an epsilon, so retain the original box
+                        // filter. Already-connected islands cannot change the partition
+                        // and need no further polygon intersection.
+                        if (la->lslices_bboxes[a].overlap(lb->lslices_bboxes[b]) &&
+                            find(offset[layer_a] + a) != find(offset[layer_b] + b) &&
+                            ! intersection_ex(la->lslices[a], lb->lslices[b]).empty())
+                            unite(offset[layer_a] + a, offset[layer_b] + b);
+                        return true;
+                    });
+            }
+        }
+        // Orca: Full bounding box of each body, indexed by its union-find root.
+        std::vector<BoundingBox> body_bbox(nreg);
+        for (size_t i = 0; i < nl; ++ i)
+            for (size_t a = 0; a < m_layers[i]->lslices.size(); ++ a)
+                body_bbox[find(offset[i] + a)].merge(m_layers[i]->lslices_bboxes[a]);
+        // Orca: Store the body bbox for every island.
+        for (size_t i = 0; i < nl; ++ i) {
+            Layer *layer = m_layers[i];
+            layer->lslices_separated_component_bboxes.resize(layer->lslices.size());
+            for (size_t a = 0; a < layer->lslices.size(); ++ a)
+                layer->lslices_separated_component_bboxes[a] = body_bbox[find(offset[i] + a)];
+        }
+    }
+
     // the following step needs to be done before combination because it may need
     // to remove only half of the combined infill
     this->bridge_over_infill();
@@ -706,71 +800,6 @@ void PrintObject::infill()
     if (this->set_started(posInfill)) {
         m_print->set_status(35, L("Generating infill toolpath"));
 
-        // Orca: precompute the object's 3D connected bodies for separated infills / per-model
-        // centering. Two islands belong to the same body when their slices overlap on adjacent
-        // layers; islands that only overlap in top-down projection but never touch (e.g. interleaved
-        // chain links) stay separate, matching "split to objects". Each layer island then records
-        // the full bounding box of its body, so its infill is centered on that body as if it were
-        // sliced alone. Done once here, before the parallel fill, and only when a region needs it.
-        bool needs_separated_components = false;
-        for (size_t i = 0; i < this->num_printing_regions(); ++ i) {
-            const PrintRegionConfig &rc = this->printing_region(i).config();
-            if (rc.separated_infills || rc.center_of_surface_pattern == CenterOfSurfacePattern::Each_Model) {
-                needs_separated_components = true;
-                break;
-            }
-        }
-        // Fast path: the feature only changes anything when the object is made of more than one
-        // connected body. Detect that cheaply the same way as "Split to objects" — more than one
-        // model part, or a single part whose mesh is splittable (is_splittable() is cached). A single
-        // body already shares the object center, i.e. the default, so skip the connectivity pass.
-        if (needs_separated_components) {
-            int                parts      = 0;
-            const ModelVolume *first_part = nullptr;
-            for (const ModelVolume *v : this->model_object()->volumes)
-                if (v->is_model_part()) { ++ parts; first_part = v; }
-            if (parts <= 1 && ! (first_part != nullptr && first_part->is_splittable()))
-                needs_separated_components = false;
-        }
-        for (Layer *layer : m_layers)
-            layer->lslices_separated_component_bboxes.clear();
-        if (needs_separated_components) {
-            const size_t        nl = m_layers.size();
-            std::vector<size_t> offset(nl + 1, 0); // flat index of the first island of each layer
-            for (size_t i = 0; i < nl; ++ i)
-                offset[i + 1] = offset[i] + m_layers[i]->lslices.size();
-            const size_t nreg = offset[nl];
-            // Union-find over every (layer, island).
-            std::vector<size_t> parent(nreg);
-            for (size_t i = 0; i < nreg; ++ i) parent[i] = i;
-            auto find = [&parent](size_t x) {
-                while (parent[x] != x) { parent[x] = parent[parent[x]]; x = parent[x]; }
-                return x;
-            };
-            auto unite = [&](size_t a, size_t b) { a = find(a); b = find(b); if (a != b) parent[a] = b; };
-            // Join islands that overlap between two consecutive layers.
-            for (size_t i = 0; i + 1 < nl; ++ i) {
-                const Layer *la = m_layers[i], *lb = m_layers[i + 1];
-                for (size_t a = 0; a < la->lslices.size(); ++ a)
-                    for (size_t b = 0; b < lb->lslices.size(); ++ b)
-                        if (la->lslices_bboxes[a].overlap(lb->lslices_bboxes[b]) &&
-                            ! intersection_ex(la->lslices[a], lb->lslices[b]).empty())
-                            unite(offset[i] + a, offset[i + 1] + b);
-            }
-            // Full bounding box of each body, indexed by its union-find root.
-            std::vector<BoundingBox> body_bbox(nreg);
-            for (size_t i = 0; i < nl; ++ i)
-                for (size_t a = 0; a < m_layers[i]->lslices.size(); ++ a)
-                    body_bbox[find(offset[i] + a)].merge(m_layers[i]->lslices_bboxes[a]);
-            // Store the body bbox for every island.
-            for (size_t i = 0; i < nl; ++ i) {
-                Layer *layer = m_layers[i];
-                layer->lslices_separated_component_bboxes.resize(layer->lslices.size());
-                for (size_t a = 0; a < layer->lslices.size(); ++ a)
-                    layer->lslices_separated_component_bboxes[a] = body_bbox[find(offset[i] + a)];
-            }
-        }
-
         const auto& adaptive_fill_octree = this->m_adaptive_fill_octrees.first;
         const auto& support_fill_octree = this->m_adaptive_fill_octrees.second;
 
@@ -1401,8 +1430,6 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "infill_anchor_max"
             || opt_key == "top_surface_line_width"
             || opt_key == "bottom_surface_density"
-            || opt_key == "center_of_surface_pattern"
-            || opt_key == "separated_infills" 
             || opt_key == "initial_layer_line_width"
             || opt_key == "small_area_infill_flow_compensation"
             || opt_key == "lateral_lattice_angle_1"
@@ -1410,6 +1437,10 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "infill_overhang_angle") {
             steps.emplace_back(posInfill);
         } else if (opt_key == "sparse_infill_pattern"
+                   // Orca: Body centering now also determines bridge anchors during preparation.
+                   // Invalidating preparation also invalidates infill, including top/bottom surfaces.
+                   || opt_key == "center_of_surface_pattern"
+                   || opt_key == "separated_infills"
                    || opt_key == "sparse_infill_smooth_factor"
                    || opt_key == "symmetric_infill_y_axis"
                    || opt_key == "infill_shift_step"
@@ -1470,6 +1501,7 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "fuzzy_skin_octaves"
             || opt_key == "fuzzy_skin_persistence"
             || opt_key == "detect_overhang_wall"
+            || opt_key == "unsupported_wall_last"
             || opt_key == "overhang_reverse"
             || opt_key == "overhang_reverse_internal_only"
             || opt_key == "overhang_reverse_threshold"
@@ -1480,13 +1512,9 @@ bool PrintObject::invalidate_state_by_config_options(
             steps.emplace_back(posPerimeters);
             steps.emplace_back(posSupportMaterial);
         } else if (opt_key == "bridge_flow" || opt_key == "internal_bridge_flow") {
-            if (m_config.support_top_z_distance > 0.) {
-            	// Only invalidate due to bridging if bridging is enabled.
-            	// If later "support_top_z_distance" is modified, the complete PrintObject is invalidated anyway.
-            	steps.emplace_back(posPerimeters);
-            	steps.emplace_back(posInfill);
-	            steps.emplace_back(posSupportMaterial);
-	        }
+            steps.emplace_back(posPerimeters);
+            steps.emplace_back(posInfill);
+            steps.emplace_back(posSupportMaterial);
         } else if (
                 opt_key == "wall_generator"
             || opt_key == "wall_transition_length"
@@ -1547,6 +1575,8 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "brim_flow_ratio"
             || opt_key == "filament_flow_ratio"
             || opt_key == "scarf_joint_flow_ratio"
+            || opt_key == "wipe_inward"
+            || opt_key == "wipe_inward_distance"
             || opt_key == "spiral_starting_flow_ratio"
             || opt_key == "spiral_finishing_flow_ratio") {
             invalidated |= m_print->invalidate_step(psGCodeExport);
@@ -1604,7 +1634,9 @@ bool PrintObject::invalidate_step(PrintObjectStep step)
 bool PrintObject::invalidate_all_steps()
 {
 	// First call the "invalidate" functions, which may cancel background processing.
-    bool result = Inherited::invalidate_all_steps() | m_print->invalidate_all_steps();
+    const bool inherited_invalidated = Inherited::invalidate_all_steps();
+    const bool print_invalidated     = m_print->invalidate_all_steps();
+    bool result = inherited_invalidated || print_invalidated;
 	// Then reset some of the depending values.
 	m_slicing_params.valid = false;
 	return result;
@@ -3009,21 +3041,12 @@ void PrintObject::bridge_over_infill()
         return diff(layers_sparse_infill, not_sparse_infill);
     };
 
-    // LAMBDA do determine optimal bridging angle
-    auto determine_bridging_angle = [](const Polygons &bridged_area, const Lines &anchors, InfillPattern dominant_pattern, double infill_direction) {
+    // Orca: Derive the fallback bridge direction from the supplied anchor geometry.
+    // Pattern-specific angle selection belongs at the call site, where the supporting
+    // layer and region are known; this helper must not override it with a base config angle.
+    auto determine_bridging_angle = [](const Polygons &bridged_area, const Lines &anchors) {
         AABBTreeLines::LinesDistancer<Line> lines_tree(anchors);
 
-        // Orca: since 3D Honeycomb was "fixed" by forcing coordf_t layerHeight = scale_(1.0), this is no longer needed.
-        // CorssHatch also does not need fixed angle.
-        //
-        // Check it the infill that require a fixed infill angle.
-        //switch (dominant_pattern) {
-        //case ip3DHoneycomb:
-        //case ipCrossHatch:
-        //    return (infill_direction + 45.0) * 2.0 * M_PI / 360.;
-        //default: break;
-        //}
-
         std::map<double, int> counted_directions;
         for (const Polygon &p : bridged_area) {
             double acc_distance = 0;
@@ -3089,18 +3112,15 @@ void PrintObject::bridge_over_infill()
         if (bridging_angle == 0) {
             bridging_angle = 0.001;
         }
-        switch (dominant_pattern) {
-        case ipHilbertCurve: bridging_angle += 0.25 * PI; break;
-        case ipOctagramSpiral: bridging_angle += (1.0 / 16.0) * PI; break;
-        default: break;
-        }
 
         return bridging_angle;
     };
 
-    // LAMBDA that will fill given polygons with lines, exapand the lines to the nearest anchor, and reconstruct polygons from the newly
-    // generated lines
-    auto construct_anchored_polygon = [](Polygons bridged_area, Lines anchors, const Flow &bridging_flow, double bridging_angle) {
+    // Orca: Extend scan sections to the nearest anchors and reconstruct the bridge area.
+    // scan_spacing controls boundary sampling independently of the extrusion spacing;
+    // anchoring overlap and smoothing thresholds still use the physical bridging flow.
+    auto construct_anchored_polygon = [](Polygons bridged_area, Lines anchors, const Flow &bridging_flow, double bridging_angle,
+                                         coord_t scan_spacing, bool restore_anchors = false) {
         auto lines_rotate = [](Lines &lines, double cos_angle, double sin_angle) {
             for (Line &l : lines) {
                 double ax = double(l.a.x());
@@ -3127,12 +3147,12 @@ void PrintObject::bridge_over_infill()
             BoundingBox bb_x = get_extents(bridged_area);
             BoundingBox bb_y = get_extents(anchors);
 
-            const size_t n_vlines = (bb_x.max.x() - bb_x.min.x() + bridging_flow.scaled_spacing() - 1) / bridging_flow.scaled_spacing();
+            const size_t n_vlines = (bb_x.max.x() - bb_x.min.x() + scan_spacing - 1) / scan_spacing;
             std::vector<Line> vertical_lines(n_vlines);
             for (size_t i = 0; i < n_vlines; i++) {
-                // Orca: Make sure the line is placed in the middle of the extrusion
-                // coord_t x           = bb_x.min.x() + i * bridging_flow.scaled_spacing();
-                coord_t x           = bb_x.min.x() + (i + 0.5) * bridging_flow.scaled_spacing();
+                // Orca: Sample the center of each reconstructed strip. Its edges lie
+                // half a scan step away, even when the sampling is finer than extrusion.
+                coord_t x           = bb_x.min.x() + (i + 0.5) * scan_spacing;
                 coord_t y_min       = bb_y.min.y() - bridging_flow.scaled_spacing();
                 coord_t y_max       = bb_y.max.y() + bridging_flow.scaled_spacing();
                 vertical_lines[i].a = Point{x, y_min};
@@ -3155,7 +3175,11 @@ void PrintObject::bridge_over_infill()
                 auto anchors_intersections = anchors_and_walls_tree.intersections_with_line<true>(vertical_lines[i]);
 
                 for (Line &section : polygon_sections[i]) {
-                    auto maybe_below_anchor = std::upper_bound(anchors_intersections.rbegin(), anchors_intersections.rend(), section.a,
+                    // Orca: A repaired boundary may already overlap its anchor by one flow width.
+                    // Include that overlap in the search so restoring rounded corners does not
+                    // extend every already anchored section into the next sparse infill cell.
+                    const coord_t overlap = restore_anchors ? bridging_flow.scaled_width() + SCALED_EPSILON : 0;
+                    auto maybe_below_anchor = std::upper_bound(anchors_intersections.rbegin(), anchors_intersections.rend(), section.a + Point{0, overlap},
                                                                [](const Point &a, const std::pair<Point, size_t> &b) {
                                                                    return a.y() > b.first.y();
                                                                });
@@ -3164,7 +3188,7 @@ void PrintObject::bridge_over_infill()
                         section.a.y() -= bridging_flow.scaled_width() * (0.5 + 0.5);
                     }
 
-                    auto maybe_upper_anchor = std::upper_bound(anchors_intersections.begin(), anchors_intersections.end(), section.b,
+                    auto maybe_upper_anchor = std::upper_bound(anchors_intersections.begin(), anchors_intersections.end(), section.b - Point{0, overlap},
                                                                [](const Point &a, const std::pair<Point, size_t> &b) {
                                                                    return a.y() < b.first.y();
                                                                });
@@ -3194,7 +3218,9 @@ void PrintObject::bridge_over_infill()
                           });
             }
 
-            // reconstruct polygon from polygon sections
+            // Orca: Reconstruct the polygon from scan sections. At discontinuities and
+            // strip starts/ends, use half the scan step for the X offsets; using half an
+            // extrusion spacing would overlap the finer strips and distort curved anchors.
             struct TracedPoly
             {
                 Points lows;
@@ -3220,8 +3246,8 @@ void PrintObject::bridge_over_infill()
                             36.0 * double(bridging_flow.scaled_spacing()) * bridging_flow.scaled_spacing()) {
                             traced_poly.lows.push_back(candidate->a);
                         } else {
-                            traced_poly.lows.push_back(traced_poly.lows.back() + Point{bridging_flow.scaled_spacing() / 2, 0});
-                            traced_poly.lows.push_back(candidate->a - Point{bridging_flow.scaled_spacing() / 2, 0});
+                            traced_poly.lows.push_back(traced_poly.lows.back() + Point{scan_spacing / 2, 0});
+                            traced_poly.lows.push_back(candidate->a - Point{scan_spacing / 2, 0});
                             traced_poly.lows.push_back(candidate->a);
                         }
 
@@ -3229,8 +3255,8 @@ void PrintObject::bridge_over_infill()
                             36.0 * double(bridging_flow.scaled_spacing()) * bridging_flow.scaled_spacing()) {
                             traced_poly.highs.push_back(candidate->b);
                         } else {
-                            traced_poly.highs.push_back(traced_poly.highs.back() + Point{bridging_flow.scaled_spacing() / 2, 0});
-                            traced_poly.highs.push_back(candidate->b - Point{bridging_flow.scaled_spacing() / 2, 0});
+                            traced_poly.highs.push_back(traced_poly.highs.back() + Point{scan_spacing / 2, 0});
+                            traced_poly.highs.push_back(candidate->b - Point{scan_spacing / 2, 0});
                             traced_poly.highs.push_back(candidate->b);
                         }
                         segment_added = true;
@@ -3238,9 +3264,9 @@ void PrintObject::bridge_over_infill()
                     }
 
                     if (!segment_added) {
-                        // Zero overlapping segments, we just close this polygon
-                        traced_poly.lows.push_back(traced_poly.lows.back() + Point{bridging_flow.scaled_spacing() / 2, 0});
-                        traced_poly.highs.push_back(traced_poly.highs.back() + Point{bridging_flow.scaled_spacing() / 2, 0});
+                        // Orca: No section continues this strip; close at its right edge.
+                        traced_poly.lows.push_back(traced_poly.lows.back() + Point{scan_spacing / 2, 0});
+                        traced_poly.highs.push_back(traced_poly.highs.back() + Point{scan_spacing / 2, 0});
                         Polygon &new_poly = expanded_bridged_area.emplace_back(std::move(traced_poly.lows));
                         new_poly.points.insert(new_poly.points.end(), traced_poly.highs.rbegin(), traced_poly.highs.rend());
                         traced_poly.lows.clear();
@@ -3255,9 +3281,9 @@ void PrintObject::bridge_over_infill()
                 for (const auto &segment : polygon_slice) {
                     if (used_segments.find(&segment) == used_segments.end()) {
                         TracedPoly &new_tp = current_traced_polys.emplace_back();
-                        new_tp.lows.push_back(segment.a - Point{bridging_flow.scaled_spacing() / 2, 0});
+                        new_tp.lows.push_back(segment.a - Point{scan_spacing / 2, 0});
                         new_tp.lows.push_back(segment.a);
-                        new_tp.highs.push_back(segment.b - Point{bridging_flow.scaled_spacing() / 2, 0});
+                        new_tp.highs.push_back(segment.b - Point{scan_spacing / 2, 0});
                         new_tp.highs.push_back(segment.b);
                     }
                 }
@@ -3364,7 +3390,10 @@ void PrintObject::bridge_over_infill()
                 total_fill_area   = closing(total_fill_area, float(SCALED_EPSILON));
                 expansion_area    = closing(expansion_area, float(SCALED_EPSILON));
                 expansion_area    = intersection(expansion_area, deep_infill_area);
-                Polylines anchors = intersection_pl(infill_lines[lidx - 1], shrink(expansion_area, spacing));
+                // Orca: Preserve the real lower-layer anchors for every candidate in this
+                // layer. Replacing this shared set for one pattern also changes later regions,
+                // and synthetic straight lines can claim support where no infill is printed.
+                const Polylines anchors = intersection_pl(infill_lines[lidx - 1], shrink(expansion_area, spacing));
                 Polygons internal_unsupported_area = shrink(deep_infill_area, spacing * 4.5);
 
 #ifdef DEBUG_BRIDGE_OVER_INFILL
@@ -3375,6 +3404,9 @@ void PrintObject::bridge_over_infill()
                 std::vector<CandidateSurface> expanded_surfaces;
                 expanded_surfaces.reserve(surfaces_by_layer[lidx].size());
                 for (const CandidateSurface &candidate : surfaces_by_layer[lidx]) {
+                    const auto &region_config = candidate.region->region().config();
+                    const bool turning_pattern = region_config.sparse_infill_pattern == ipHilbertCurve ||
+                                                 region_config.sparse_infill_pattern == ipOctagramSpiral;
                     const Flow &flow              = candidate.region->bridging_flow(frSolidInfill, true);
                     Polygons    area_to_be_bridge = expand(candidate.new_polys, flow.scaled_spacing());
                     area_to_be_bridge             = intersection(area_to_be_bridge, deep_infill_area);
@@ -3403,20 +3435,40 @@ void PrintObject::bridge_over_infill()
                                to_lines(area_to_be_bridge), to_lines(boundary_plines), to_lines(anchors), to_lines(expansion_area));
 #endif
 
-                    double bridging_angle = 0;
-                    if (!anchors.empty()) {
-                        bridging_angle = determine_bridging_angle(area_to_be_bridge, to_lines(anchors),
-                                                                  candidate.region->region().config().sparse_infill_pattern.value,
-                                                                  candidate.region->region().config().infill_direction.value);
-                    } else {
-                        // use expansion boundaries as anchors.
-                        // Also, use Infill pattern that is neutral for angle determination, since there are no infill lines.
-                        bridging_angle = determine_bridging_angle(area_to_be_bridge, to_lines(boundary_plines), InfillPattern::ipLine, 0);
+                    double bridging_angle = -1.;
+                    if (!anchors.empty() && turning_pattern) {
+                        // Orca: Keep adjacent bridges over Hilbert/Octagram aligned despite
+                        // their many local turning directions. Use the lower layer's rotation,
+                        // since that is the infill supporting the bridge, not the current layer's.
+                        for (const LayerRegion *lower_region : layer->lower_layer->regions()) {
+                            // Orca: Apply the configured direction only if the same region has
+                            // sparse infill below this bridge. A height modifier may put another
+                            // pattern underneath, requiring the geometry-based fallback below.
+                            if (&lower_region->region() != &candidate.region->region() ||
+                                intersection(area_to_be_bridge, to_polygons(lower_region->fill_surfaces.filter_by_type(stInternal))).empty())
+                                continue;
+                            bridging_angle = calculate_infill_rotation_angle(po, layer->lower_layer->id(), region_config.infill_direction.value,
+                                                                            region_config.sparse_infill_rotate_template.value) + 0.5 * PI;
+                            // Orca: Apply model alignment as infill generation does, then normalize
+                            // the undirected bridge angle to [0, PI), including negative rotations.
+                            if (region_config.align_infill_direction_to_model) {
+                                const auto &m = po->trafo().matrix();
+                                bridging_angle += std::atan2(double(m(1, 0)), double(m(0, 0)));
+                            }
+                            bridging_angle = std::fmod(bridging_angle, PI);
+                            if (bridging_angle < 0.)
+                                bridging_angle += PI;
+                            break;
+                        }
                     }
+                    // Orca: A different region below (e.g. a height modifier) needs the actual anchor
+                    // directions. When there are no sparse anchors, use the expansion boundaries.
+                    if (bridging_angle < 0.)
+                        bridging_angle = determine_bridging_angle(area_to_be_bridge, to_lines(anchors.empty() ? boundary_plines : anchors));
                     
-                    // ORCA: Internal bridge angle override
+                    // Orca: Preserve the user's absolute or relative internal bridge angle
+                    // override after automatic direction selection.
                     if (candidate.region->region().config().internal_bridge_angle.value > 0) {
-                        const auto  &region_config      = candidate.region->region().config();
                         const double custom_angle_rad   = Geometry::deg2rad(region_config.internal_bridge_angle.value);
                         if (region_config.relative_bridge_angle.value)
                             bridging_angle += custom_angle_rad;
@@ -3429,11 +3481,19 @@ void PrintObject::bridge_over_infill()
                         }
                     }
 
+                    // Orca: Changing the bridge direction must not change its physical supports.
+                    // Extend to actual sparse infill or the existing boundary anchors, never to
+                    // a synthetic grid that merely has the same nominal angle and spacing.
                     boundary_plines.insert(boundary_plines.end(), anchors.begin(), anchors.end());
                     if (!lightning_area.empty() && !intersection(area_to_be_bridge, lightning_area).empty()) {
                         boundary_plines = intersection_pl(boundary_plines, expand(area_to_be_bridge, scale_(10)));
                     }
-                    Polygons bridging_area = construct_anchored_polygon(area_to_be_bridge, to_lines(boundary_plines), flow, bridging_angle);
+                    // Orca: Use four samples per extrusion spacing for Hilbert/Octagram so the
+                    // reconstructed boundary follows rounded anchors instead of cutting corners.
+                    // Keep the original step for other patterns and at least one coordinate unit
+                    // after integer division. This changes boundary accuracy, not infill density.
+                    const coord_t scan_spacing = std::max(coord_t(1), flow.scaled_spacing() / (turning_pattern ? 4 : 1));
+                    Polygons bridging_area = construct_anchored_polygon(area_to_be_bridge, to_lines(boundary_plines), flow, bridging_angle, scan_spacing);
 
                     // Check collision with other expanded surfaces
                     {
@@ -3447,7 +3507,9 @@ void PrintObject::bridge_over_infill()
                             }
                         }
                         if (reconstruct) {
-                            bridging_area = construct_anchored_polygon(area_to_be_bridge, to_lines(boundary_plines), flow, bridging_angle);
+                            // Orca: Retain the same sampling accuracy when matching a nearby
+                            // bridge's direction; rebuilding must not lose the curved supports.
+                            bridging_area = construct_anchored_polygon(area_to_be_bridge, to_lines(boundary_plines), flow, bridging_angle, scan_spacing);
                         }
                     }
 
@@ -3455,6 +3517,13 @@ void PrintObject::bridge_over_infill()
                     // bridging_area         = opening(bridging_area, flow.scaled_spacing());
                     bridging_area          = opening(bridging_area, flow.scaled_spacing() * 0.75);
                     bridging_area          = closing(bridging_area, flow.scaled_spacing());
+                    // Orca: Opening/closing can pull rounded bridge ends away from their real
+                    // supports. Restore those contacts after smoothing, preserving the cleaned
+                    // area and the selected angle; do not smooth the restored contacts again.
+                    if (turning_pattern && !bridging_area.empty()) {
+                        bridging_area = union_(bridging_area, construct_anchored_polygon(bridging_area, to_lines(boundary_plines), flow,
+                                                                                       bridging_angle, scan_spacing, true));
+                    }
                     bridging_area          = intersection(bridging_area, limiting_area);
                     bridging_area          = intersection(bridging_area, total_fill_area);
                     bridging_area          = diff(bridging_area, total_top_area);
diff --git a/src/libslic3r/PublishSettings.cpp b/src/libslic3r/PublishSettings.cpp
new file mode 100644
index 0000000000..6d28cc0af3
--- /dev/null
+++ b/src/libslic3r/PublishSettings.cpp
@@ -0,0 +1,315 @@
+#include "PublishSettings.hpp"
+
+#include "PresetBundle.hpp"
+#include "Preset.hpp"
+#include "PrintConfig.hpp"
+#include "MaterialType.hpp"
+
+#include <boost/log/trivial.hpp>
+#include <boost/algorithm/string/trim.hpp>
+
+#include <map>
+#include <set>
+
+namespace Slic3r {
+
+std::string publish_base_key(const std::string &key)
+{
+    const size_t pos = key.find('#');
+    return pos == std::string::npos ? key : key.substr(0, pos);
+}
+
+// Parse the trailing "#N" variant index ("retraction_length#2" -> 2). Returns -1 when the key
+// carries no '#' separator or its suffix is malformed; mirrors the importer's strict parse
+// (PresetBundle.cpp) so the export side rejects the same variants the receiver would skip.
+static int publish_variant_index(const std::string &key, const std::string &base_key)
+{
+    if (key.size() <= base_key.size() || key.compare(0, base_key.size(), base_key) != 0 || key[base_key.size()] != '#')
+        return -1;
+    const std::string suffix = key.substr(base_key.size() + 1);
+    if (suffix.empty())
+        return -1;
+    int idx = 0;
+    for (const char c : suffix) {
+        if (c < '0' || c > '9')
+            return -1;
+        idx = idx * 10 + (c - '0');
+        if (idx > 1000000) // overflow guard; real vector sizes are tiny
+            return -1;
+    }
+    return idx;
+}
+
+std::string normalize_filament_type(const std::string& type)
+{
+    if (type.empty())
+        return type;
+    if (MaterialType::find(type) != nullptr)
+        return type;
+    // "PLA High Speed" -> "PLA": strip a space-separated modifier, but keep dash-separated
+    // types like "PA-CF" / "PETG-CF" intact (they are distinct materials, not modifiers).
+    const size_t sep = type.find(' ');
+    if (sep != std::string::npos) {
+        const std::string base = type.substr(0, sep);
+        if (MaterialType::find(base) != nullptr)
+            return base;
+    }
+    return type;
+}
+
+void make_publish_universal(DynamicPrintConfig &config)
+{
+    // Lists: empty => compatible with every printer / every print preset. Conditions:
+    // empty so a leftover expression left behind by the baseline clone can never
+    // re-narrow the match (see is_compatible_with_printer, Preset.cpp:840). All four
+    // keys exist on filament presets; nil-guard for hand-crafted future schemas.
+    if (auto *opt = config.opt<ConfigOptionStrings>("compatible_printers", false))
+        opt->values.clear();
+    if (auto *opt = config.opt<ConfigOptionStrings>("compatible_prints", false))
+        opt->values.clear();
+    if (auto *opt = config.opt<ConfigOptionString>("compatible_printers_condition", false))
+        opt->value.clear();
+    if (auto *opt = config.opt<ConfigOptionString>("compatible_prints_condition", false))
+        opt->value.clear();
+}
+
+std::string publish_material_base_name(const std::string &preset_name)
+{
+    if (preset_name.empty())
+        return preset_name;
+    const size_t at = preset_name.find('@');
+    std::string base = (at == std::string::npos) ? preset_name : preset_name.substr(0, at);
+    boost::trim_right(base);
+    return base;
+}
+
+const std::set<std::string>& publish_structural_keys()
+{
+    // Non-publishable keys: the *_settings_id keys are also in PresetCollection::skipped_in_dirty
+    // (Preset.cpp) / stripped from configs (profile_print_params_same); publishing them would
+    // rewrite the user's preset inheritance/structure.
+    static const std::set<std::string> structural_keys = {
+        "printer_settings_id", "filament_settings_id", "print_settings_id",
+        "sla_print_settings_id", "sla_material_settings_id",
+        "compatible_printers", "compatible_prints",
+        "compatible_printers_condition", "compatible_prints_condition",
+        "default_filament_profile", "default_print_profile",
+        "default_sla_print_profile", "default_sla_material_profile",
+        "extruder_count", "bed_shape",
+        "inherits", "inherits_group",
+        "printer_technology", "printer_model", "printer_variant",
+        "physical_printer_settings_id", "filament_ids",
+        "different_settings_to_system"
+    };
+    return structural_keys;
+}
+
+const std::set<std::string>& publish_mixed_keys()
+{
+    // Must match PresetBundle's s_project_options mixed-color group (PresetBundle.cpp): these
+    // are project-level parallel per-slot arrays, not filament-preset options, so the import
+    // material pass applies them into project_config instead of a filament preset config.
+    static const std::set<std::string> mixed_keys = {
+        "filament_is_mixed",
+        "filament_mixed_components",
+        "filament_mixed_sublayer_ratios",
+        "filament_mixed_gradient",
+        "filament_mixed_gradient_range",
+        "filament_mixed_gradient_curve",
+        "filament_mixed_gradient_per_part"
+    };
+    return mixed_keys;
+}
+
+// The printer tab's "Retraction" optgroup (TabPrinter::build_fff, Tab.cpp), in tab order.
+// KEEP IN SYNC with that optgroup: the published-3MF printer allowlist is built from these
+// lists, so any key shown there must be publishable here (and vice versa).
+const std::vector<PublishablePrinterOption>& publishable_printer_retraction_options()
+{
+    static const std::vector<PublishablePrinterOption> options = {
+        { "retraction_length",              "printer_extruder_retraction#length" },
+        { "retract_restart_extra",          "printer_extruder_retraction#extra-length-on-restart" },
+        { "retraction_speed",               "printer_extruder_retraction#retraction-speed" },
+        { "deretraction_speed",             "printer_extruder_retraction#deretraction-speed" },
+        { "retraction_minimum_travel",      "printer_extruder_retraction#travel-distance-threshold" },
+        { "retract_when_changing_layer",    "printer_extruder_retraction#retract-on-layer-change" },
+        { "wipe",                           "printer_extruder_retraction#wipe-while-retracting" },
+        { "wipe_distance",                  "printer_extruder_retraction#wipe-distance" },
+        { "retract_before_wipe",            "printer_extruder_retraction#retract-amount-before-wipe" },
+        { "retract_after_wipe",             "printer_extruder_retraction#retract-amount-after-wipe" },
+    };
+    return options;
+}
+
+// The printer tab's "Z-Hop" optgroup (TabPrinter::build_fff, Tab.cpp), in tab order. KEEP IN
+// SYNC with that optgroup, same as publishable_printer_retraction_options().
+const std::vector<PublishablePrinterOption>& publishable_printer_z_hop_options()
+{
+    static const std::vector<PublishablePrinterOption> options = {
+        { "retract_lift_enforce", "printer_extruder_z_hop#on-surfaces" },
+        { "z_hop_types",          "printer_extruder_z_hop#z-hop-type" },
+        { "z_hop",                "printer_extruder_z_hop#z-hop-height" },
+        { "travel_slope",         "printer_extruder_z_hop#traveling-angle" },
+        { "retract_lift_above",   "printer_extruder_z_hop#only-lift-z-above" },
+        { "retract_lift_below",   "printer_extruder_z_hop#only-lift-z-below" },
+    };
+    return options;
+}
+
+const std::set<std::string>& publishable_printer_keys()
+{
+    // Union of the two optgroups; "Retraction when switching material" keys are excluded
+    // (toolchange retraction is device/profile territory, not a publishable behavior tweak).
+    static const std::set<std::string> printer_keys = [] {
+        std::set<std::string> keys;
+        for (const PublishablePrinterOption &opt : publishable_printer_retraction_options())
+            keys.insert(opt.key);
+        for (const PublishablePrinterOption &opt : publishable_printer_z_hop_options())
+            keys.insert(opt.key);
+        return keys;
+    }();
+    return printer_keys;
+}
+
+std::vector<std::string> collect_dirty_settings_keys(const PresetBundle& bundle)
+{
+    std::set<std::string> keys;
+
+    // Union the dirty keys of each collection's edited preset (filaments may span multiple
+    // slots); feeds only the Publish dialog's pre-check.
+    for (const std::string& key : bundle.prints.current_dirty_options(true))
+        keys.insert(key);
+    for (const std::string& key : bundle.printers.current_dirty_options(true))
+        keys.insert(key);
+    for (const std::string& key : bundle.filaments.current_dirty_options(true))
+        keys.insert(key);
+
+    return std::vector<std::string>(keys.begin(), keys.end());
+}
+
+DynamicPrintConfig filter_published_config(
+    const DynamicPrintConfig &full_config,
+    const std::vector<std::string> &published_keys,
+    const std::vector<PublishedMaterialEntry> &material_keys)
+{
+    DynamicPrintConfig filtered;
+
+    std::set<std::string> base_keys_to_include;
+    // Never masked (whole-vector serialization): identity, plate geometry, process keys and
+    // printer keys without a "#N" variant.
+    std::set<std::string>         mask_exempt_keys;
+    // Material entries: base key -> author slots whose values must survive; other slots are
+    // masked to their defaults so a publish (partial or full) does not leak unrelated slot
+    // data.
+    std::map<std::string, std::set<int>> slot_mask_map;
+
+    // 1. Mandatory material identity & slot count keys for 3MF validation/normalization
+    // (filament_ids: exported for validation, denylisted on apply - see publish_structural_keys).
+    static const std::vector<std::string> s_material_identity_keys = {
+        "filament_colour",
+        "filament_type",
+        "filament_vendor",
+        "filament_ids",
+        "filament_diameter",
+        "filament_self_index",
+        "filament_extruder_variant"
+    };
+    for (const std::string &key : s_material_identity_keys) {
+        base_keys_to_include.insert(key);
+        mask_exempt_keys.insert(key);
+    }
+
+    // 2. Published plate / bed geometry keys (wipe tower positioning)
+    static const std::vector<std::string> s_plate_geometry_keys = {
+        "wipe_tower_x",
+        "wipe_tower_y",
+        "wipe_tower_rotation_angle"
+    };
+    for (const std::string &key : s_plate_geometry_keys) {
+        base_keys_to_include.insert(key);
+        mask_exempt_keys.insert(key);
+    }
+
+    // 3. Process and printer published keys. Printer per-extruder keys carry a "#N" variant
+    // (e.g. retraction_length#2): mask the base to the author's extruder index so a partial
+    // publish does not serialize every extruder's value (same slot-masking as the material side).
+    const std::set<std::string> &printer_keys = publishable_printer_keys();
+    for (const std::string &key : published_keys) {
+        const std::string base_key = publish_base_key(key);
+        if (base_key.empty())
+            continue;
+        base_keys_to_include.insert(base_key);
+        if (printer_keys.count(base_key) != 0) {
+            const int variant_idx = publish_variant_index(key, base_key);
+            if (variant_idx >= 0)
+                slot_mask_map[base_key].insert(variant_idx);
+            else
+                mask_exempt_keys.insert(base_key); // bare printer key or malformed variant: whole vector
+        } else {
+            mask_exempt_keys.insert(base_key); // process key: whole vector
+        }
+    }
+
+    // 4. Material-specific published keys. Both partial (entry.keys) and full-publish
+    // (entry.full_keys) entries mask to the author's slot on export (see the copy loop below);
+    // slot-less entries (hand-crafted files) stay unmasked (whole vector).
+    for (const PublishedMaterialEntry &entry : material_keys) {
+        for (const std::string &key : entry.keys) {
+            const std::string base_key = publish_base_key(key);
+            if (base_key.empty())
+                continue;
+            base_keys_to_include.insert(base_key);
+            if (entry.slot >= 0)
+                slot_mask_map[base_key].insert(entry.slot);
+        }
+        for (const std::string &key : entry.full_keys) {
+            const std::string base_key = publish_base_key(key);
+            if (base_key.empty())
+                continue;
+            base_keys_to_include.insert(base_key);
+            if (entry.slot >= 0)
+                slot_mask_map[base_key].insert(entry.slot);
+        }
+    }
+
+    // Masking restores every non-published slot of a vector option with the option default, so
+    // a partial publish does not leak unrelated slot data. can_mask_slots reports whether a key
+    // is maskable at all (vector option plus a registered default of the same type); an
+    // unmaskable key is dropped from the payload entirely instead of shipping the author's
+    // whole vector.
+    auto can_mask_slots = [](const ConfigOption &opt, const ConfigOptionDef *def) -> bool {
+        if (def == nullptr || !def->default_value || def->default_value->type() != opt.type())
+            return false;
+        const auto *vec         = dynamic_cast<const ConfigOptionVectorBase *>(&opt);
+        const auto *default_vec = dynamic_cast<const ConfigOptionVectorBase *>(def->default_value.get());
+        return vec != nullptr && vec->size() > 0 && default_vec != nullptr && !default_vec->empty();
+    };
+    auto mask_slots = [](ConfigOption &opt, const ConfigOptionDef *def, const std::set<int> &keep_slots) {
+        auto *vec = dynamic_cast<ConfigOptionVectorBase*>(&opt);
+        for (size_t idx = 0; idx < vec->size(); ++idx)
+            if (keep_slots.count(static_cast<int>(idx)) == 0)
+                vec->set_at(def->default_value.get(), idx, 0);
+    };
+
+    // Copy the selected options from full_config into the filtered config.
+    for (const std::string &key : base_keys_to_include) {
+        const ConfigOption *opt = full_config.option(key);
+        if (opt == nullptr)
+            continue;
+        const auto  mask_it       = slot_mask_map.find(key);
+        const bool  needs_masking = mask_exempt_keys.count(key) == 0 && mask_it != slot_mask_map.end() && !mask_it->second.empty();
+        if (needs_masking && !can_mask_slots(*opt, print_config_def.get(key))) {
+            BOOST_LOG_TRIVIAL(warning) << "publish: dropping unmaskable key \"" << key
+                                       << "\" from the published payload (no usable option default)";
+            continue;
+        }
+        ConfigOption *cloned = opt->clone();
+        if (needs_masking)
+            mask_slots(*cloned, print_config_def.get(key), mask_it->second);
+        filtered.set_key_value(key, cloned);
+    }
+
+    return filtered;
+}
+
+} // namespace Slic3r
diff --git a/src/libslic3r/PublishSettings.hpp b/src/libslic3r/PublishSettings.hpp
new file mode 100644
index 0000000000..60ea9a8354
--- /dev/null
+++ b/src/libslic3r/PublishSettings.hpp
@@ -0,0 +1,99 @@
+#pragma once
+#include <set>
+#include <string>
+#include <vector>
+
+namespace Slic3r {
+class PresetBundle;
+
+// Strip a trailing "#N" variant suffix ("retraction_length#2" -> "retraction_length").
+std::string publish_base_key(const std::string &key);
+
+// Structural keys that are never applied onto the receiver's presets when loading a published
+// 3MF (single source of truth for the denylist); applying them would rewrite the user's preset
+// inheritance/structure. filament_ids is still exported via the identity list (3MF validation
+// needs it) - exported, never applied.
+const std::set<std::string>& publish_structural_keys();
+
+// The mixed-color filament project keys (parallel per-slot arrays, see PresetBundle's
+// s_project_options). Import applies them into project_config, not a filament preset.
+const std::set<std::string>& publish_mixed_keys();
+
+// One row of the printer tab's "Retraction" / "Z-Hop" optgroups (config key + tab icon id).
+struct PublishablePrinterOption {
+    const char *key;  // config key, e.g. "retraction_length"
+    const char *icon; // tab icon id, e.g. "printer_extruder_retraction#length"
+};
+
+// The printer tab's "Retraction" / "Z-Hop" optgroup options, in tab order.
+const std::vector<PublishablePrinterOption>& publishable_printer_retraction_options();
+const std::vector<PublishablePrinterOption>& publishable_printer_z_hop_options();
+
+// Union of the two optgroup option lists; printer keys apply on import only if their base
+// key is in this allowlist.
+const std::set<std::string>& publishable_printer_keys();
+
+// Union of setting keys differing from the base/system preset across the current print,
+// printer and filament presets (feeds the Publish dialog's pre-check).
+std::vector<std::string> collect_dirty_settings_keys(const PresetBundle& bundle);
+
+// Per-slot published material keys, applied positionally (author slot N -> receiver slot N).
+// The identity fields drive the created copy's naming and grouping on Full entries, the
+// notification labels, and the partial type gate (publish_type) is the author's explicit
+// opt-in for requiring a material type.
+struct PublishedMaterialEntry {
+    std::string filament_type;   // material family, e.g. "PLA" (may be empty)
+    std::string filament_vendor; // e.g. "Generic", "Bambu" (may be empty)
+    std::string filament_id;     // stable material id, e.g. "GFL99" (may be empty)
+    // Unique preset id of the author's slot preset (e.g. Orca Filament Library "setting_id").
+    // Not matched against the receiver's library; carried so identical Full entries within one
+    // load share one created instance (within-load dedup key).
+    std::string setting_id;
+    // Canonical name of the author's slot preset (e.g. "Generic PLA @System"). On Full import
+    // it names the created copy after its "@variant" tail is stripped; never matched against
+    // the receiver's library.
+    std::string preset_name;
+    // 0-based author filament slot; -1 (hand-crafted files) is skipped.
+    int         slot{-1};
+    std::vector<std::string> keys;
+    // "Full Publish": the whole filament preset (full_keys) is published. On the receiver Full
+    // Publish always creates a standalone parentless copy (libslic3r's "Detach from parent"),
+    // universally compatible and project-embedded only - never written to the user's library.
+    // Identical Full entries within one load share one created instance (within-load dedup).
+    bool full{false};
+    // All non-structural filament keys of the author's slot preset; values travel in the file
+    // config, masked to the author's slot index.
+    std::vector<std::string> full_keys;
+    // Vendor-agnostic (MaterialType) filament type the author requires for this slot; on a
+    // partial entry's mismatch the slot is replaced with a same-type filament. Full entries
+    // consult no gate.
+    bool publish_type{false};
+    std::string publish_type_value;
+    // Required filament colour, applied on load regardless of the type match.
+    bool publish_color{false};
+    std::string color;
+    // Import-side only, never serialized: the authored slot sits past the receiver's physical
+    // capacity, so the entry is appended as an empty mixed-filament placeholder (virtual tail
+    // slot; the GUI flags it for the user to assign components).
+    bool mixed_placeholder{false};
+};
+
+// "PLA High Speed" -> "PLA" (strip a space modifier); dash types like "PA-CF" are kept intact.
+std::string normalize_filament_type(const std::string& type);
+
+class DynamicPrintConfig;
+// Clear the compatibility lists/conditions on a filament config so it is universally
+// compatible once detached (empty lists + empty conditions = compatible with everything).
+void make_publish_universal(DynamicPrintConfig &config);
+
+// Naming base for a detached published-material copy: "Generic PLA @System" -> "Generic PLA"
+// (truncate/right-trim at the first '@' tail). Empty result means "fall back to identity".
+std::string publish_material_base_name(const std::string &preset_name);
+
+// Minimal DynamicPrintConfig for a published 3MF export: only the selected published keys,
+// material keys, identity fields and plate geometry keys.
+DynamicPrintConfig filter_published_config(
+    const DynamicPrintConfig &full_config,
+    const std::vector<std::string> &published_keys,
+    const std::vector<PublishedMaterialEntry> &material_keys);
+}
diff --git a/src/libslic3r/SLAPrint.cpp b/src/libslic3r/SLAPrint.cpp
index cdefd3e10e..eb37ca578c 100644
--- a/src/libslic3r/SLAPrint.cpp
+++ b/src/libslic3r/SLAPrint.cpp
@@ -1007,7 +1007,9 @@ bool SLAPrintObject::invalidate_step(SLAPrintObjectStep step)
 
 bool SLAPrintObject::invalidate_all_steps()
 {
-    return Inherited::invalidate_all_steps() | m_print->invalidate_all_steps();
+    const bool inherited_invalidated = Inherited::invalidate_all_steps();
+    const bool print_invalidated     = m_print->invalidate_all_steps();
+    return inherited_invalidated || print_invalidated;
 }
 
 double SLAPrintObject::get_elevation() const {
diff --git a/src/libslic3r/Support/SupportMaterial.cpp b/src/libslic3r/Support/SupportMaterial.cpp
index 12ac275592..a955eb5ca7 100644
--- a/src/libslic3r/Support/SupportMaterial.cpp
+++ b/src/libslic3r/Support/SupportMaterial.cpp
@@ -333,8 +333,7 @@ PrintObjectSupportMaterial::PrintObjectSupportMaterial(const PrintObject *object
     m_print_config          (&object->print()->config()),
     m_object_config         (&object->config()),
     m_slicing_params        (slicing_params),
-    m_support_params        (*object),
-	m_object                (object)
+    m_support_params        (*object)
 {
 }
 
diff --git a/src/libslic3r/Support/SupportMaterial.hpp b/src/libslic3r/Support/SupportMaterial.hpp
index 50b8256c4a..6d5355dab1 100644
--- a/src/libslic3r/Support/SupportMaterial.hpp
+++ b/src/libslic3r/Support/SupportMaterial.hpp
@@ -86,7 +86,6 @@ private:
 */
 
 	// Following objects are not owned by SupportMaterial class.
-	const PrintObject 		*m_object;
 	const PrintConfig 		*m_print_config;
 	const PrintObjectConfig *m_object_config;
 	// Pre-calculated parameters shared between the object slicer and the support generator,
diff --git a/src/libslic3r/Support/TreeSupport.cpp b/src/libslic3r/Support/TreeSupport.cpp
index 2b06f11244..519b6e826e 100644
--- a/src/libslic3r/Support/TreeSupport.cpp
+++ b/src/libslic3r/Support/TreeSupport.cpp
@@ -2846,7 +2846,9 @@ void TreeSupport::drop_nodes()
             const MinimumSpanningTree& mst = spanning_trees[group_index];
             //In the first pass, merge all nodes that are close together.
             std::vector<std::pair<const Point, SupportNode*>> nodes_vec(nodes_this_part.begin(), nodes_this_part.end());
-            tbb::parallel_for_each(nodes_vec.begin(), nodes_vec.end(), [&](const std::pair<const Point, SupportNode*>& entry) {
+            // Sequential: nodes merge into and invalidate each other in place, so parallel execution
+            // makes the merge order (and thus the result) depend on thread scheduling.
+            std::for_each(nodes_vec.begin(), nodes_vec.end(), [&](const std::pair<const Point, SupportNode*>& entry) {
                 SupportNode* p_node = entry.second;
                 SupportNode& node = *p_node;
                 if (!p_node->valid)
@@ -2934,7 +2936,32 @@ void TreeSupport::drop_nodes()
             );
 
             //In the second pass, move all middle nodes.
-            tbb::parallel_for_each(nodes_vec.begin(), nodes_vec.end(), [&](const std::pair<const Point, SupportNode*>& entry) {
+            // Still parallel: this pass only reads other nodes. Side effects (invalidation, new
+            // nodes, contact_nodes/unsupported_branch_leaves updates) are recorded per node and
+            // applied afterwards in node order. Node creation must be deferred too, since
+            // SupportNode's constructor writes `parent->child = this` on other nodes.
+            struct PendingNode {
+                Point        position;
+                int          distance_to_top           = 0;
+                int          support_roof_layers_below = 0;
+                bool         to_buildplate             = false;
+                SupportNode *parent                    = nullptr;
+                bool         zero_max_move             = false;
+                bool         has_overhang              = false;
+                ExPolygon    overhang;
+                bool         clamp_radius              = false;
+                coordf_t     parent_radius             = 0;
+                double       dist_to_outer             = 0;
+            };
+            struct PassTwoResult {
+                bool                     invalidate       = false;
+                bool                     unsupported_leaf = false;
+                std::vector<PendingNode> pending;
+            };
+            std::vector<PassTwoResult> pass2_results(nodes_vec.size());
+            auto pass2_body = [&](size_t node_idx) {
+                const std::pair<const Point, SupportNode*>& entry = nodes_vec[node_idx];
+                PassTwoResult& pass2_out = pass2_results[node_idx];
 
                 SupportNode* p_node = entry.second;
                 const SupportNode& node = *p_node;
@@ -2949,14 +2976,16 @@ void TreeSupport::drop_nodes()
                     ExPolygons overhangs_next = diff_clipped({ node.overhang }, get_collision(0, obj_layer_nr_next));
                     for(auto& overhang:overhangs_next) {
                         Point        next_pt     = overhang.contour.centroid();
-                        SupportNode *next_node   = m_ts_data->create_node(next_pt, p_node->distance_to_top + 1, obj_layer_nr_next,
-                                                                          p_node->support_roof_layers_below - (p_node->distance_to_top >= 0 ? 1 : 0),
-                                                                          to_buildplate, p_node, print_z_next, height_next);
-                        next_node->max_move_dist = 0;
-                        next_node->overhang = std::move(overhang);
-                        m_ts_data->m_mutex.lock();
-                        contact_nodes[layer_nr_next].emplace_back(next_node);
-                        m_ts_data->m_mutex.unlock();
+                        PendingNode pending;
+                        pending.position                  = next_pt;
+                        pending.distance_to_top           = p_node->distance_to_top + 1;
+                        pending.support_roof_layers_below = p_node->support_roof_layers_below - (p_node->distance_to_top >= 0 ? 1 : 0);
+                        pending.to_buildplate             = to_buildplate;
+                        pending.parent                    = p_node;
+                        pending.zero_max_move             = true;
+                        pending.has_overhang              = true;
+                        pending.overhang                  = std::move(overhang);
+                        pass2_out.pending.emplace_back(std::move(pending));
 
                     }
                     return;
@@ -2973,17 +3002,17 @@ void TreeSupport::drop_nodes()
                     {
                         if (support_on_buildplate_only)
                         {
-                            unsupported_branch_leaves.push_front({ layer_nr, p_node });
+                            pass2_out.unsupported_leaf = true;
                         }
                         else {
-                            p_node->valid = false;
+                            pass2_out.invalidate = true;
                         }
                         return;
                     }
                     // if the link between parent and current is cut by contours, mark current as bottom contact node
                     if (p_node->parent && intersection_ln({p_node->position, p_node->parent->position}, layer_contours).empty()==false)
                     {
-                        p_node->valid = false;
+                        pass2_out.invalidate = true;
                         return;
                     }
                 }
@@ -3096,20 +3125,47 @@ void TreeSupport::drop_nodes()
                 }
                 auto              next_collision = get_collision(0, obj_layer_nr_next);
                 const bool   to_buildplate  = !is_inside_ex(m_ts_data->m_layer_outlines[obj_layer_nr_next], next_layer_vertex);
-                SupportNode *     next_node     = m_ts_data->create_node(next_layer_vertex, node.distance_to_top + 1, obj_layer_nr_next,
-                    node.support_roof_layers_below - (node.distance_to_top >= 0 ? 1 : 0),
-                    to_buildplate, p_node, print_z_next, height_next);
                 // don't increase radius if next node will collide partially with the object (STUDIO-7883)
-                to_outside             = projection_onto(next_collision, next_node->position);
+                to_outside             = projection_onto(next_collision, next_layer_vertex);
                 direction_to_outer     = to_outside - node.position;
                 double dist_to_outer   = unscale_(direction_to_outer.cast<double>().norm());
-                next_node->radius      = std::max(node.radius, std::min(next_node->radius, dist_to_outer));
-                get_max_move_dist(next_node);
-                m_ts_data->m_mutex.lock();
-                contact_nodes[layer_nr_next].push_back(next_node);
-                m_ts_data->m_mutex.unlock();
+                PendingNode pending;
+                pending.position                  = next_layer_vertex;
+                pending.distance_to_top           = node.distance_to_top + 1;
+                pending.support_roof_layers_below = node.support_roof_layers_below - (node.distance_to_top >= 0 ? 1 : 0);
+                pending.to_buildplate             = to_buildplate;
+                pending.parent                    = p_node;
+                pending.clamp_radius              = true;
+                pending.parent_radius             = node.radius;
+                pending.dist_to_outer             = dist_to_outer;
+                pass2_out.pending.emplace_back(std::move(pending));
+            };
+            tbb::parallel_for(tbb::blocked_range<size_t>(0, nodes_vec.size()),
+                [&pass2_body](const tbb::blocked_range<size_t>& node_range) {
+                    for (size_t node_idx = node_range.begin(); node_idx < node_range.end(); ++ node_idx)
+                        pass2_body(node_idx);
+                });
+            // Apply the recorded side effects in node order.
+            for (size_t node_idx = 0; node_idx < nodes_vec.size(); ++ node_idx) {
+                PassTwoResult& pass2_out = pass2_results[node_idx];
+                for (PendingNode& pending : pass2_out.pending) {
+                    SupportNode* next_node = m_ts_data->create_node(pending.position, pending.distance_to_top, obj_layer_nr_next,
+                        pending.support_roof_layers_below, pending.to_buildplate, pending.parent, print_z_next, height_next);
+                    if (pending.zero_max_move)
+                        next_node->max_move_dist = 0;
+                    if (pending.has_overhang)
+                        next_node->overhang = std::move(pending.overhang);
+                    if (pending.clamp_radius) {
+                        next_node->radius = std::max(pending.parent_radius, std::min(next_node->radius, pending.dist_to_outer));
+                        get_max_move_dist(next_node);
+                    }
+                    contact_nodes[layer_nr_next].push_back(next_node);
+                }
+                if (pass2_out.unsupported_leaf)
+                    unsupported_branch_leaves.push_front({ layer_nr, nodes_vec[node_idx].second });
+                if (pass2_out.invalidate)
+                    nodes_vec[node_idx].second->valid = false;
             }
-            );
         }
 
 #ifdef SUPPORT_TREE_DEBUG_TO_SVG
diff --git a/src/libslic3r/Support/TreeSupport.hpp b/src/libslic3r/Support/TreeSupport.hpp
index 61e030ef86..bd5a154e26 100644
--- a/src/libslic3r/Support/TreeSupport.hpp
+++ b/src/libslic3r/Support/TreeSupport.hpp
@@ -432,7 +432,6 @@ private:
     size_t          m_highest_overhang_layer = 0;
     std::vector<std::vector<MinimumSpanningTree>> m_spanning_trees;
     std::vector< std::unordered_map<Line, bool, LineHash>> m_mst_line_x_layer_contour_caches;
-    float    DO_NOT_MOVER_UNDER_MM = 0.0;
     coordf_t base_radius                        = 0.0;
     const coordf_t MAX_BRANCH_RADIUS = 10.0;
     const coordf_t MIN_BRANCH_RADIUS = 0.4;
diff --git a/src/libslic3r/Support/TreeSupport3D.cpp b/src/libslic3r/Support/TreeSupport3D.cpp
index 29131502d2..3cd3f4110d 100644
--- a/src/libslic3r/Support/TreeSupport3D.cpp
+++ b/src/libslic3r/Support/TreeSupport3D.cpp
@@ -2382,13 +2382,10 @@ static void merge_influence_areas(
     size_t num_buckets_initial;
     {
         // How many buckets per first merge iteration?
-        const size_t num_threads     = tbb::this_task_arena::max_concurrency();
-        // 4 buckets per thread if possible,
-        const size_t num_buckets_min = (input_size + 2) / 4;
-        // 2 buckets per thread otherwise.
-        const size_t num_buckets_max = input_size / 2;
-        num_buckets_initial          = num_buckets_min >= num_threads ? num_buckets_min : num_buckets_max;
-        const size_t bucket_size     = num_buckets_min >= num_threads ? 4 : 2;
+        // Fixed at 4: merging is not associative, so sizing buckets off max_concurrency() made
+        // results depend on the core count of the slicing machine.
+        const size_t bucket_size     = 4;
+        num_buckets_initial          = (input_size + 2) / 4;
         // Fill in the buckets.
         SupportElementMerging *it = influence_areas.data();
         // Reserve one more bucket to keep a single influence area which will not be merged in the first iteration.
diff --git a/src/libslic3r/Thread.cpp b/src/libslic3r/Thread.cpp
index 3030b6d194..edd7c2a3d0 100644
--- a/src/libslic3r/Thread.cpp
+++ b/src/libslic3r/Thread.cpp
@@ -30,6 +30,11 @@ static HMODULE					s_hKernel32 = nullptr;
 static SetThreadDescriptionType s_fnSetThreadDescription = nullptr;
 static GetThreadDescriptionType	s_fnGetThreadDescription = nullptr;
 
+// Convert the FARPROC from GetProcAddress to Fn through a generic function pointer.
+template<typename Fn> static Fn load_proc(HMODULE module, const char* name) {
+	return reinterpret_cast<Fn>(reinterpret_cast<void(*)()>(::GetProcAddress(module, name)));
+}
+
 static bool WindowsGetSetThreadNameAPIInitialize()
 {
 	if (! s_SetGetThreadDescriptionInitialized) {
@@ -37,8 +42,8 @@ static bool WindowsGetSetThreadNameAPIInitialize()
 		// to initialize 
 		s_hKernel32 = LoadLibraryW(L"Kernel32.dll");
 		if (s_hKernel32) {
-			s_fnSetThreadDescription = (SetThreadDescriptionType)::GetProcAddress(s_hKernel32, "SetThreadDescription");
-			s_fnGetThreadDescription = (GetThreadDescriptionType)::GetProcAddress(s_hKernel32, "GetThreadDescription");
+			s_fnSetThreadDescription = load_proc<SetThreadDescriptionType>(s_hKernel32, "SetThreadDescription");
+			s_fnGetThreadDescription = load_proc<GetThreadDescriptionType>(s_hKernel32, "GetThreadDescription");
 		}
 		s_SetGetThreadDescriptionInitialized = true;
 	}
diff --git a/src/libslic3r/Utils.hpp b/src/libslic3r/Utils.hpp
index 55d9b716cf..b21da72fc8 100644
--- a/src/libslic3r/Utils.hpp
+++ b/src/libslic3r/Utils.hpp
@@ -70,6 +70,7 @@
 #define CLI_FILAMENT_CAN_NOT_MAP      -66
 #define CLI_ONLY_ONE_TPU_SUPPORTED      -67
 #define CLI_FILAMENTS_NOT_SUPPORTED_BY_EXTRUDER  -68
+#define CLI_MIXED_FILAMENT_INVALID      -69
 
 #define CLI_SLICING_ERROR                  -100
 #define CLI_GCODE_PATH_CONFLICTS           -101
@@ -255,6 +256,10 @@ extern bool is_gallery_file(const std::string& path, char const* type);
 extern bool is_shapes_dir(const std::string& dir);
 //BBS: add json support
 extern bool is_json_file(const std::string& path);
+// True if rel_path is relative, has no ".." component and, joined to root, still resolves inside it.
+// Both '/' and '\\' are treated as separators on every platform, so an archive rejected on one OS
+// is rejected on all of them.
+extern bool is_path_within_root(const std::string &rel_path, const boost::filesystem::path &root);
 
 // Orca: custom protocal support utils
 inline bool is_orca_open(const std::string& url) { return boost::starts_with(url, "orcaslicer://open"); }
@@ -309,6 +314,9 @@ extern unsigned get_current_pid();
 std::string per_user_temp_id();
 // Per-user temp root under `base`; an empty `user_id` returns `base` unchanged.
 std::string per_user_temp_dir(const std::string &base, const std::string &user_id);
+// Completes a relative command line input path against the current working directory. Absolute
+// paths and custom open protocol URLs are returned unchanged.
+std::string resolve_cli_input_path(const std::string &path);
 // BBS: backup & restore
 std::string get_process_name(int pid);
 
diff --git a/src/libslic3r/libslic3r.h b/src/libslic3r/libslic3r.h
index 6584566f40..c339da566a 100644
--- a/src/libslic3r/libslic3r.h
+++ b/src/libslic3r/libslic3r.h
@@ -93,6 +93,9 @@ static constexpr double INSET_OVERLAP_TOLERANCE = 0.4;
 static constexpr double EXTERNAL_INFILL_MARGIN = 3;
 static constexpr double BRIDGE_INFILL_MARGIN = 1;
 static constexpr double WIPE_TOWER_MARGIN = 1.;
+// Margin for system placement of the wipe tower (defaults, re-placement, CLI). Positions
+// within WIPE_TOWER_MARGIN stay valid: a user drag down to that limit is respected.
+static constexpr double WIPE_TOWER_AUTO_MARGIN = 15.;
 //FIXME Better to use an inline function with an explicit return type.
 //inline coord_t scale_(coordf_t v) { return coord_t(floor(v / SCALING_FACTOR + 0.5f)); }
 #define scale_(val) ((val) / SCALING_FACTOR)
diff --git a/src/libslic3r/utils.cpp b/src/libslic3r/utils.cpp
index 5f4baac951..9def5dad17 100644
--- a/src/libslic3r/utils.cpp
+++ b/src/libslic3r/utils.cpp
@@ -961,7 +961,7 @@ CopyFileResult copy_file(const std::string &from, const std::string &to, std::st
     BOOL result = CopyFileW(src_wstr, dst_wstr, FALSE);
     if (!result) {
         DWORD errCode = GetLastError();
-        error_message = "Error: " + errCode;
+        error_message = "Error: " + std::to_string(errCode);
         ret = FAIL_COPY_FILE;
         goto __finished;
     }
@@ -1088,6 +1088,30 @@ bool is_json_file(const std::string& path)
 	return boost::iends_with(path, ".json");
 }
 
+bool is_path_within_root(const std::string &rel_path, const boost::filesystem::path &root)
+{
+    auto is_separator = [](char c) { return c == '/' || c == '\\'; };
+    if (rel_path.empty() || is_separator(rel_path.front()) || (rel_path.size() > 1 && rel_path[1] == ':'))
+        return false;
+    for (size_t start = 0; start <= rel_path.size();) {
+        size_t end = start;
+        while (end < rel_path.size() && !is_separator(rel_path[end]))
+            ++end;
+        if (rel_path.compare(start, end - start, "..") == 0)
+            return false;
+        start = end + 1;
+    }
+    // Resolve against the canonical root so a symlink inside it cannot lead back out.
+    try {
+        const std::string root_str = boost::filesystem::weakly_canonical(root).string();
+        const std::string full_str = boost::filesystem::weakly_canonical(root / rel_path).string();
+        return full_str.compare(0, root_str.size(), root_str) == 0 &&
+               (full_str.size() == root_str.size() || full_str[root_str.size()] == boost::filesystem::path::preferred_separator);
+    } catch (const boost::filesystem::filesystem_error &) {
+        return false;
+    }
+}
+
 bool is_img_file(const std::string &path)
 {
 	return boost::iends_with(path, ".png") || boost::iends_with(path, ".svg");
@@ -1315,6 +1339,19 @@ std::string per_user_temp_dir(const std::string &base, const std::string &user_i
     return base + "/orcaslicer_" + user_id;
 }
 
+std::string resolve_cli_input_path(const std::string &path)
+{
+    const boost::filesystem::path input(path);
+    if (path.empty() || is_supported_open_protocol(path) || input.is_absolute())
+        return path;
+
+    boost::system::error_code ec;
+    const boost::filesystem::path resolved = boost::filesystem::system_complete(input, ec);
+    if (ec)
+        return path;
+    return resolved.lexically_normal().make_preferred().string();
+}
+
 // BBS: backup & restore
 std::string get_process_name(int pid)
 {
diff --git a/src/slic3r/CMakeLists.txt b/src/slic3r/CMakeLists.txt
index bef13e2fb5..e924c317cc 100644
--- a/src/slic3r/CMakeLists.txt
+++ b/src/slic3r/CMakeLists.txt
@@ -97,6 +97,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/CloneDialog.hpp
     GUI/ConfigManipulation.cpp
     GUI/ConfigManipulation.hpp
+    GUI/ConfigValueFormatter.cpp
+    GUI/ConfigValueFormatter.hpp
     GUI/ConfigWizard.cpp
     GUI/ConfigWizard.hpp
     GUI/ConfigWizard_private.hpp
@@ -451,6 +453,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/Project.hpp
     GUI/PublishDialog.cpp
     GUI/PublishDialog.hpp
+    GUI/PublishSettingsDialog.cpp
+    GUI/PublishSettingsDialog.hpp
     GUI/PurgeModeDialog.cpp
     GUI/PurgeModeDialog.hpp
     GUI/RammingChart.cpp
@@ -676,6 +680,10 @@ set(SLIC3R_GUI_SOURCES
     Utils/bambu_networking.hpp
     Utils/Bonjour.cpp
     Utils/Bonjour.hpp
+    Utils/MeshInspect.cpp
+    Utils/MeshInspect.hpp
+    Utils/PaintCLI.cpp
+    Utils/PaintCLI.hpp
     Utils/CalibUtils.cpp
     Utils/CalibUtils.hpp
     Utils/ColorSpaceConvert.cpp
diff --git a/src/slic3r/GUI/3DScene.cpp b/src/slic3r/GUI/3DScene.cpp
index f65c0e3532..6dbea1272a 100644
--- a/src/slic3r/GUI/3DScene.cpp
+++ b/src/slic3r/GUI/3DScene.cpp
@@ -20,6 +20,8 @@
 #include "libslic3r/AppConfig.hpp"
 #include "libslic3r/PresetBundle.hpp"
 #include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/GCode/WipeTower.hpp"
+#include "libslic3r/GCode/WipeTowerEstimate.hpp"
 #include "libslic3r/Tesselate.hpp"
 #include "libslic3r/PrintConfig.hpp"
 
@@ -919,6 +921,21 @@ int GLVolumeCollection::load_wipe_tower_preview(
     GUI::PartPlateList& ppl = GUI::wxGetApp().plater()->get_partplate_list();
     std::vector<int> plate_extruders = ppl.get_plate(plate_idx)->get_extruders(true);
     TriangleMesh wipe_tower_shell = make_cube(width, depth, height);
+    // The brim is part of the printed footprint: draw it and fold it into the shell so the
+    // outside-bed shader and the drag clamp react to the true first-layer extent.
+    const bool   show_brim   = brim_width > 0.f;
+    const float  brim_height = 0.2f; // one first layer, visual only
+    TriangleMesh brim_slab;
+    if (show_brim) {
+        // The brim follows the real first-layer outline: a Type2 cone-wall tower's base bulges
+        // past the body box. The wall type and angle are print settings, the planner a printer one.
+        const DynamicPrintConfig &print_cfg   = GUI::wxGetApp().preset_bundle->prints.get_edited_preset().config;
+        const DynamicPrintConfig &printer_cfg = GUI::wxGetApp().preset_bundle->printers.get_edited_preset().config;
+        const Polygon  outline      = estimate_wipe_tower_first_layer_outline(print_cfg, resolve_wipe_tower_type(printer_cfg), width, depth, height);
+        const Polygons brim_outline = offset(outline, scaled(brim_width));
+        brim_slab                   = WipeTower::its_make_rib_brim(brim_outline.empty() ? outline : brim_outline.front(), brim_height);
+        wipe_tower_shell.merge(brim_slab);
+    }
     for (int extruder_id : plate_extruders) {
         if (extruder_id <= extruder_colors.size())
             colors.push_back(extruder_colors[extruder_id - 1]);
@@ -929,14 +946,19 @@ int GLVolumeCollection::load_wipe_tower_preview(
     // Orca: make it transparent
     for(auto& color : colors)
         color.a(0.66f);
+    const size_t slab_count = colors.size(); // per-filament body slabs; the brim part comes after
+    if (show_brim && !colors.empty())
+        colors.push_back(colors.front());
     volumes.emplace_back(new GLWipeTowerVolume(colors));
     GLWipeTowerVolume& v = *dynamic_cast<GLWipeTowerVolume*>(volumes.back());
     v.model_per_colors.resize(colors.size());
-    for (int i = 0; i < colors.size(); i++) {
-        TriangleMesh color_part = make_cube(width, depth / colors.size(), height);
-        color_part.translate({ 0.f, depth * i / colors.size(), 0. });
+    for (size_t i = 0; i < slab_count; i++) {
+        TriangleMesh color_part = make_cube(width, depth / slab_count, height);
+        color_part.translate({ 0.f, depth * i / slab_count, 0. });
         v.model_per_colors[i].init_from(color_part);
     }
+    if (show_brim && !colors.empty())
+        v.model_per_colors[slab_count].init_from(brim_slab);
     v.model.init_from(wipe_tower_shell);
     v.mesh_raycaster = std::make_unique<GUI::MeshRaycaster>(std::make_shared<const TriangleMesh>(wipe_tower_shell));
     v.set_convex_hull(wipe_tower_shell);
diff --git a/src/slic3r/GUI/AMSDryControl.cpp b/src/slic3r/GUI/AMSDryControl.cpp
index c191e24eac..17d7d62ad8 100644
--- a/src/slic3r/GUI/AMSDryControl.cpp
+++ b/src/slic3r/GUI/AMSDryControl.cpp
@@ -1,6 +1,7 @@
 #include "AMSDryControl.hpp"
 #include "slic3r/GUI/DeviceCore/DevFilaSystem.h"
 #include "GUI_App.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "I18N.hpp"
 
 #include "slic3r/GUI/DeviceCore/DevExtruderSystem.h"
@@ -1196,11 +1197,11 @@ void AMSDryCtrWin::update_normal_description(DevAms* dev_ams)
     for (const auto& lim : ams_limits) {
         if (dev_ams->GetAmsType() == lim.type) {
             if (temp_val > lim.max_temp) {
-                wxString msg = wxString(lim.name) + _L(" maximum drying temperature is ") + wxString::Format(wxT("%d"), lim.max_temp) + wxString::FromUTF8("°C.");
+                wxString msg = wxString::Format(_L("%s maximum drying temperature is %d°C."), wxString(lim.name), lim.max_temp);
                 warning_text += msg + "\n";
                 can_enable_button = false;
             } else if (temp_val < lim.min_temp) {
-                wxString msg = wxString(lim.name) + _L(" minimum drying temperature is ") + wxString::Format(wxT("%d"), lim.min_temp) + wxString::FromUTF8("°C.");
+                wxString msg = wxString::Format(_L("%s minimum drying temperature is %d°C."), wxString(lim.name), lim.min_temp);
                 warning_text += msg + "\n";
                 can_enable_button = false;
             }
diff --git a/src/slic3r/GUI/AMSDryControl.hpp b/src/slic3r/GUI/AMSDryControl.hpp
index 46699650d6..6c5df86849 100644
--- a/src/slic3r/GUI/AMSDryControl.hpp
+++ b/src/slic3r/GUI/AMSDryControl.hpp
@@ -14,6 +14,7 @@
 
 //Previous defintions
 class wxGrid;
+class ProgressBar;
 
 namespace Slic3r {
 
@@ -97,12 +98,6 @@ private:
     wxSimplebook* m_main_simplebook{nullptr};
     wxPanel* m_original_page{nullptr};
 
-    wxWindow* m_amswin{nullptr};
-    wxBoxSizer* m_sizer_ams_items{nullptr};
-    wxScrolledWindow* m_panel_prv_left {nullptr};
-    wxScrolledWindow* m_panel_prv_right{nullptr};
-    wxBoxSizer* m_sizer_prv_left{nullptr};
-    wxBoxSizer* m_sizer_prv_right{nullptr};
 
     // left panel related members
     ScalableBitmap m_humidity_image;
diff --git a/src/slic3r/GUI/AMSMaterialsSetting.cpp b/src/slic3r/GUI/AMSMaterialsSetting.cpp
index 68f1b44212..f0fdf950a0 100644
--- a/src/slic3r/GUI/AMSMaterialsSetting.cpp
+++ b/src/slic3r/GUI/AMSMaterialsSetting.cpp
@@ -2,6 +2,8 @@
 #include "ExtrusionCalibration.hpp"
 #include "MsgDialog.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "libslic3r/Preset.hpp"
 #include "I18N.hpp"
 #include <algorithm>
diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp
index 3e745b0a64..22ffaef034 100644
--- a/src/slic3r/GUI/AmsMappingPopup.cpp
+++ b/src/slic3r/GUI/AmsMappingPopup.cpp
@@ -11,6 +11,7 @@
 #include "MainFrame.hpp"
 #include "format.hpp"
 #include "Widgets/ProgressDialog.hpp"
+#include <wx/tooltip.h>
 #include "Widgets/RoundedRectangle.hpp"
 #include "Widgets/StaticBox.hpp"
 
diff --git a/src/slic3r/GUI/AmsMappingPopup.hpp b/src/slic3r/GUI/AmsMappingPopup.hpp
index fc3f89fa69..21a3e38080 100644
--- a/src/slic3r/GUI/AmsMappingPopup.hpp
+++ b/src/slic3r/GUI/AmsMappingPopup.hpp
@@ -457,7 +457,6 @@ private:
     ScalableBitmap close_img;
 
     wxStaticBitmap* curr_humidity_img;
-    wxStaticBitmap* m_img;
 
     Label* m_staticText;;
     Label* m_staticText_note;
diff --git a/src/slic3r/GUI/AmsMappingPopupUpdate.cpp b/src/slic3r/GUI/AmsMappingPopupUpdate.cpp
index 7d8215f55d..3e2853ad1a 100644
--- a/src/slic3r/GUI/AmsMappingPopupUpdate.cpp
+++ b/src/slic3r/GUI/AmsMappingPopupUpdate.cpp
@@ -406,7 +406,7 @@ void AmsMapingPopup::update_ams_data_multi_machines()
         int ams_type = 1;
         int nozzle_id = 0;
 
-        if (ams_type >= 1 || ams_type <= 3) { // 1:ams 2:ams-lite 3:n3f
+        if (ams_type >= 1 && ams_type <= 3) { // 1:ams 2:ams-lite 3:n3f
 
             auto sizer_mapping_list = new wxBoxSizer(wxHORIZONTAL);
             auto ams_mapping_item_container = new MappingContainer(nozzle_id == 0 ? m_right_marea_panel : m_left_marea_panel, "AMS-1", 4);
diff --git a/src/slic3r/GUI/BBLTopbar.hpp b/src/slic3r/GUI/BBLTopbar.hpp
index e60a95f64f..2745490d00 100644
--- a/src/slic3r/GUI/BBLTopbar.hpp
+++ b/src/slic3r/GUI/BBLTopbar.hpp
@@ -93,7 +93,6 @@ private:
     CenteredTitle*    m_title_ctrl { nullptr };
     wxString          m_titleText;
 
-    wxAuiToolBarItem* m_model_store_item;
     
     //wxAuiToolBarItem *m_publish_item;
     wxAuiToolBarItem* m_undo_item;
diff --git a/src/slic3r/GUI/BackgroundSlicingProcess.cpp b/src/slic3r/GUI/BackgroundSlicingProcess.cpp
index 64c52c6e72..f795b41999 100644
--- a/src/slic3r/GUI/BackgroundSlicingProcess.cpp
+++ b/src/slic3r/GUI/BackgroundSlicingProcess.cpp
@@ -848,7 +848,9 @@ void BackgroundSlicingProcess::finalize_gcode()
     case CopyFileResult::SUCCESS: break; // no error
     case CopyFileResult::FAIL_COPY_FILE:
         throw Slic3r::ExportError(GUI::format(
-            _L("Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\nError message: %1%"),
+            m_export_path_on_removable_media ?
+                _L("Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\nError message: %1%") :
+                _L("Copying of the temporary G-code to the output G-code failed.\nError message: %1%"),
             error_message));
         break;
     case CopyFileResult::FAIL_FILES_DIFFERENT:
diff --git a/src/slic3r/GUI/BaseTransparentDPIFrame.hpp b/src/slic3r/GUI/BaseTransparentDPIFrame.hpp
index 35ed51ddfe..7dc83b4d46 100644
--- a/src/slic3r/GUI/BaseTransparentDPIFrame.hpp
+++ b/src/slic3r/GUI/BaseTransparentDPIFrame.hpp
@@ -5,8 +5,10 @@
 #include <thread>
 #include "GUI_App.hpp"
 #include "GUI_Utils.hpp"
+#include <wx/timer.h>
 
 class Button;
+class Label;
 class CheckBox;
 namespace Slic3r { namespace GUI {
 class CapsuleButton;
diff --git a/src/slic3r/GUI/BindDialog.hpp b/src/slic3r/GUI/BindDialog.hpp
index b809bc523b..8d21c1be5e 100644
--- a/src/slic3r/GUI/BindDialog.hpp
+++ b/src/slic3r/GUI/BindDialog.hpp
@@ -65,18 +65,10 @@ private:
     wxPanel* request_bind_panel;
     wxPanel* binding_panel;
 
-    wxScrolledWindow* m_sw_bind_failed_info;
-    Label* m_bind_failed_info;
-    Label* m_st_txt_error_code{ nullptr };
-    Label* m_st_txt_error_desc{ nullptr };
-    Label* m_st_txt_extra_info{ nullptr };
-    HyperLink*      m_link_network_state{ nullptr };
     wxString        m_result_info;
     wxString        m_result_extra;
     wxString        m_ping_code_wiki;
-    bool            m_show_error_info_state = true;
 
-    int             m_result_code;
     std::shared_ptr<BBLStatusBarBind> m_status_bar;
 
 public:
@@ -110,7 +102,6 @@ private:
     wxBitmap      m_bitmap_show_error_close;
     wxBitmap      m_bitmap_show_error_open;
     wxScrolledWindow* m_sw_bind_failed_info;
-    Label*          m_bind_failed_info;
     Label*          m_st_txt_error_code{ nullptr };
     Label*          m_st_txt_error_desc{ nullptr };
     Label*          m_st_txt_extra_info{ nullptr };
diff --git a/src/slic3r/GUI/CalibrationPanel.hpp b/src/slic3r/GUI/CalibrationPanel.hpp
index eafb380c79..1f6b097af9 100644
--- a/src/slic3r/GUI/CalibrationPanel.hpp
+++ b/src/slic3r/GUI/CalibrationPanel.hpp
@@ -70,11 +70,7 @@ public:
 
 private:
     int                                 m_my_devices_count{ 0 };
-    int                                 m_other_devices_count{ 0 };
     bool                                m_dismiss{ false };
-    wxWindow*                           m_placeholder_panel   { nullptr };
-    wxWindow*                           m_panel_body{ nullptr };
-    wxBoxSizer*                         m_sizer_body{ nullptr };
     wxBoxSizer*                         m_sizer_my_devices{ nullptr };
     wxScrolledWindow*                   m_scrolledWindow{ nullptr };
     wxTimer*                            m_refresh_timer{ nullptr };
diff --git a/src/slic3r/GUI/CalibrationWizard.cpp b/src/slic3r/GUI/CalibrationWizard.cpp
index 7496d59a51..f80562578d 100644
--- a/src/slic3r/GUI/CalibrationWizard.cpp
+++ b/src/slic3r/GUI/CalibrationWizard.cpp
@@ -1,6 +1,7 @@
 #include "CalibrationWizard.hpp"
 #include "I18N.hpp"
 #include "GUI_App.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "MsgDialog.hpp"
 #include "CalibrationWizardPage.hpp"
 #include "../../libslic3r/calib.hpp"
diff --git a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp
index 5267715439..7a83d39dd3 100644
--- a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp
+++ b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp
@@ -1,5 +1,7 @@
 #include <regex>
 #include "CalibrationWizardPresetPage.hpp"
+#include "GUI.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "I18N.hpp"
 #include "Widgets/Label.hpp"
 #include "MsgDialog.hpp"
@@ -360,7 +362,7 @@ void CaliPresetCustomRangePanel::create_panel(wxWindow* parent)
                 int max_decimal_length;
                 if (i <= 1)
                     max_decimal_length = 3;
-                else if (i >= 2)
+                else
                     max_decimal_length = 4;
                 if (decimal_number > max_decimal_length) {
                     int allowed_length = number.length() - decimal_number + max_decimal_length;
diff --git a/src/slic3r/GUI/CalibrationWizardSavePage.cpp b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
index f7699cfab0..427f022d1c 100644
--- a/src/slic3r/GUI/CalibrationWizardSavePage.cpp
+++ b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
@@ -1,4 +1,5 @@
 #include "CalibrationWizardSavePage.hpp"
+#include "GUI.hpp"
 #include "I18N.hpp"
 #include "Widgets/Label.hpp"
 #include "MsgDialog.hpp"
diff --git a/src/slic3r/GUI/CameraPopup.hpp b/src/slic3r/GUI/CameraPopup.hpp
index dbdb81a9cb..f45ebb6e42 100644
--- a/src/slic3r/GUI/CameraPopup.hpp
+++ b/src/slic3r/GUI/CameraPopup.hpp
@@ -72,8 +72,10 @@ private:
     SwitchButton* m_switch_recording;
     wxStaticText* m_text_vcamera;
     SwitchButton* m_switch_vcamera;
+#if !BBL_RELEASE_TO_PUBLIC
     wxStaticText* m_text_liveview_retry;
     SwitchButton* m_switch_liveview_retry;
+#endif //BBL_RELEASE_TO_PUBLIC
     wxStaticText* m_custom_camera_hint;
     TextInput* m_custom_camera_input;
     Button* m_custom_camera_input_confirm;
diff --git a/src/slic3r/GUI/CapsuleButton.cpp b/src/slic3r/GUI/CapsuleButton.cpp
index 8afe39889e..8d71f9911e 100644
--- a/src/slic3r/GUI/CapsuleButton.cpp
+++ b/src/slic3r/GUI/CapsuleButton.cpp
@@ -1,5 +1,6 @@
 #include "GUI_App.hpp"
 #include "CapsuleButton.hpp"
+#include "Widgets/StateColor.hpp"
 #include <wx/dcbuffer.h>
 #include "wx/graphics.h"
 #include "Widgets/Label.hpp"
diff --git a/src/slic3r/GUI/ColorDecomposeSupport.cpp b/src/slic3r/GUI/ColorDecomposeSupport.cpp
index 6621b97059..cfd0d02532 100644
--- a/src/slic3r/GUI/ColorDecomposeSupport.cpp
+++ b/src/slic3r/GUI/ColorDecomposeSupport.cpp
@@ -1,4 +1,5 @@
 #include "ColorDecomposeSupport.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "MixedFilamentDialog.hpp"
 #include "GUI_App.hpp"
 #include "MsgDialog.hpp"
@@ -394,8 +395,9 @@ bool confirm_create_decompose_missing_components(wxWindow* parent, const std::ve
         missing_text += missing[i].display_name;
     }
 
-    wxString message = _L("The current filament list does not contain ") + missing_text +
-        _L(". A project filament required by the mixed filament will be created automatically after decomposition.");
+    wxString message = wxString::Format(_L("The current filament list does not contain %s. A project filament required by "
+                                           "the mixed filament will be created automatically after decomposition."),
+                                        missing_text);
 
     MessageDialog dlg(parent, message, _L("Tip"), wxOK | wxCANCEL | wxICON_INFORMATION);
     dlg.show_dsa_button();
diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp
index 8eab1c785c..f40c71ec4a 100644
--- a/src/slic3r/GUI/ConfigManipulation.cpp
+++ b/src/slic3r/GUI/ConfigManipulation.cpp
@@ -2,6 +2,7 @@
 #include "ConfigManipulation.hpp"
 #include "I18N.hpp"
 #include "GUI_App.hpp"
+#include "DeviceCore/DevConfigUtil.h"
 #include "format.hpp"
 #include "libslic3r/Config.hpp"
 #include "libslic3r/Model.hpp"
@@ -1040,10 +1041,12 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in
 
     for (auto el : {"wipe_tower_rotation_angle", "wipe_tower_cone_angle",
                     "wipe_tower_extra_spacing", "wipe_tower_max_purge_speed",
-                    "wipe_tower_bridging", "wipe_tower_extra_flow",
-                    "wipe_tower_no_sparse_layers"})
+                    "wipe_tower_bridging", "wipe_tower_extra_flow"})
             toggle_line(el, have_prime_tower && supports_wipe_tower_2);
 
+    // Orca: both tower generators skip sparse layers, so this is not a wipe tower 2 exclusive.
+    toggle_line("wipe_tower_no_sparse_layers", have_prime_tower);
+
     WipeTowerWallType wipe_tower_wall_type = config->opt_enum<WipeTowerWallType>("wipe_tower_wall_type");
     bool have_rib_wall = (wipe_tower_wall_type == WipeTowerWallType::wtwRib)&&have_prime_tower;
     toggle_line("wipe_tower_cone_angle", have_prime_tower && supports_wipe_tower_2 && wipe_tower_wall_type == WipeTowerWallType::wtwCone);
@@ -1054,6 +1057,10 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in
 
     toggle_line("single_extruder_multi_material_priming", !bSEMM && have_prime_tower && supports_wipe_tower_2);
 
+    bool use_cyclic_ordering = config->opt_enum<ToolChangeOrderingType>("toolchange_ordering") == ToolChangeOrderingType::Cyclic;
+    toggle_line("toolchange_cyclic_order", use_cyclic_ordering);
+    toggle_line("toolchange_cyclic_first_layer", use_cyclic_ordering);
+
     toggle_line("prime_volume",have_prime_tower && (!purge_in_primetower || !bSEMM));
 
     for (auto el : {"flush_into_infill", "flush_into_support", "flush_into_objects"})
@@ -1103,6 +1110,9 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in
     auto is_role_based_wipe_speed = config->opt_bool("role_based_wipe_speed");
     toggle_field("wipe_speed",!is_role_based_wipe_speed);
 
+    const bool have_wipe_inward = config->opt_bool("wipe_inward");
+    toggle_line("wipe_inward_distance", have_wipe_inward);
+
     for (auto el : {"accel_to_decel_enable", "accel_to_decel_factor"})
         toggle_line(el, gcf_is_klipper);
     if(gcf_is_klipper)
@@ -1124,6 +1134,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in
     bool has_detect_overhang_wall = config->opt_bool("detect_overhang_wall");
     bool has_overhang_reverse     = config->opt_bool("overhang_reverse");
     bool allow_overhang_reverse   = !has_spiral_vase;
+    toggle_line("unsupported_wall_last", has_detect_overhang_wall);
     toggle_line("overhang_reverse", allow_overhang_reverse);
     toggle_line("overhang_reverse_internal_only", allow_overhang_reverse && has_overhang_reverse);
     bool has_overhang_reverse_internal_only = config->opt_bool("overhang_reverse_internal_only");
diff --git a/src/slic3r/GUI/ConfigValueFormatter.cpp b/src/slic3r/GUI/ConfigValueFormatter.cpp
new file mode 100644
index 0000000000..17cf902217
--- /dev/null
+++ b/src/slic3r/GUI/ConfigValueFormatter.cpp
@@ -0,0 +1,256 @@
+#include "ConfigValueFormatter.hpp"
+
+#include <algorithm>
+#include <cstdlib>
+#include <string>
+#include <vector>
+
+#include <boost/algorithm/string.hpp>
+#include <boost/format.hpp>
+
+#include "libslic3r/Config.hpp"
+#include "libslic3r/PrintConfig.hpp"
+
+#include "I18N.hpp"
+#include "GUI.hpp"
+#include "Field.hpp"
+
+namespace Slic3r {
+namespace GUI {
+
+std::string get_pure_opt_key(const std::string& opt_key)
+{
+    std::string pure_key = opt_key;
+    const int pos = pure_key.find("#");
+    if (pos > 0)
+        boost::erase_tail(pure_key, pure_key.size() - pos);
+    return pure_key;
+}
+
+wxString get_string_from_enum(const std::string& opt_key, const DynamicPrintConfig& config, bool is_infill, int idx)
+{
+    const ConfigOptionDef& def = config.def()->options.at(opt_key);
+    const std::vector<std::string>& names = def.enum_labels;//ConfigOptionEnum<T>::get_enum_names();
+    int val = 0;
+
+    if (idx >= 0)
+        val = dynamic_cast<const ConfigOptionInts*>(config.option(opt_key))->get_at(idx);
+    else
+        val = config.option(opt_key)->getInt();
+
+    // Each infill doesn't use all list of infill declared in PrintConfig.hpp.
+    // So we should "convert" val to the correct one
+    if (is_infill) {
+        for (auto key_val : *def.enum_keys_map)
+            if (int(key_val.second) == val) {
+                auto it = std::find(def.enum_values.begin(), def.enum_values.end(), key_val.first);
+                if (it == def.enum_values.end())
+                    return "";
+                return from_u8(_utf8(names[it - def.enum_values.begin()]));
+            }
+        return _L("Undefined");
+    }
+    return from_u8(_utf8(names[val]));
+}
+
+wxString get_full_label(const std::string& opt_key, const DynamicPrintConfig& config)
+{
+    const std::string pure_key = get_pure_opt_key(opt_key);
+    auto option = config.option(pure_key);
+
+    if (!option || option->is_nil())
+        return _L("N/A");
+
+    const ConfigOptionDef* opt = config.def()->get(pure_key);
+    return opt->full_label.empty() ? opt->label : opt->full_label;
+}
+
+wxString get_string_value(const std::string& opt_key, const DynamicPrintConfig& config)
+{
+    int orig_opt_idx = -1;
+    int opt_idx = -1;
+    int pos = opt_key.find("#");
+    std::string temp_str = opt_key;
+    if (pos > 0) {
+        boost::erase_head(temp_str, pos + 1);
+        orig_opt_idx = std::atoi(temp_str.c_str());
+    }
+    opt_idx = orig_opt_idx >= 0 ? orig_opt_idx : 0;
+    const std::string pure_key = get_pure_opt_key(opt_key);
+    auto option = config.option(pure_key);
+    if (!option) {
+        return _L("N/A");
+    }
+    auto opt_vector = dynamic_cast<const ConfigOptionVectorBase *>(option);
+
+    if ((option->is_scalar() && option->is_nil()) ||
+        (option->is_vector() && opt_vector && opt_idx >= 0 && opt_idx < opt_vector->size() && opt_vector->is_nil(opt_idx)))
+        return _L("N/A");
+
+    wxString out;
+
+    const ConfigOptionDef* opt = config.def()->get(pure_key);
+    bool is_nullable = opt->nullable;
+
+    switch (opt->type) {
+    case coInt:
+        return from_u8((boost::format("%1%") % config.opt_int(pure_key)).str());
+    case coInts: {
+        if (is_nullable) {
+            auto values = config.opt<ConfigOptionIntsNullable>(pure_key);
+            if (opt_idx < values->size())
+                return from_u8((boost::format("%1%") % values->get_at(opt_idx)).str());
+        }
+        else {
+            auto values = config.opt<ConfigOptionInts>(pure_key);
+            if (orig_opt_idx >= 0 && orig_opt_idx < values->size()) {
+                return from_u8((boost::format("%1%") % values->get_at(opt_idx)).str());
+            }
+            else {
+                std::string value_str;
+                for (int i = 0; i < values->size(); i++) {
+                    value_str += std::to_string(values->get_at(i));
+                    if (i != values->size() - 1) {
+                        value_str += ",";
+                    }
+                }
+                return from_u8(value_str);
+            }
+        }
+        return _L("Undefined");
+    }
+    case coBool:
+        return config.opt_bool(pure_key) ? "true" : "false";
+    case coBools: {
+        if (is_nullable) {
+            auto values = config.opt<ConfigOptionBoolsNullable>(pure_key);
+            if (opt_idx < values->size())
+                return values->get_at(opt_idx) ? "true" : "false";
+        }
+        else {
+            auto values = config.opt<ConfigOptionBools>(pure_key);
+            if (opt_idx < values->size())
+                return values->get_at(opt_idx) ? "true" : "false";
+        }
+        return _L("Undefined");
+    }
+    case coPercent:
+        return from_u8((boost::format("%1%%%") % int(config.optptr(pure_key)->getFloat())).str());
+    case coPercents: {
+        if (is_nullable) {
+            auto values = config.opt<ConfigOptionPercentsNullable>(pure_key);
+            if (opt_idx < values->size())
+                return from_u8((boost::format("%1%%%") % values->get_at(opt_idx)).str());
+        }
+        else {
+            auto values = config.opt<ConfigOptionPercents>(pure_key);
+            if (opt_idx < values->size())
+                return from_u8((boost::format("%1%%%") % values->get_at(opt_idx)).str());
+        }
+        return _L("Undefined");
+    }
+    case coFloat:
+        return double_to_string(config.opt_float(pure_key));
+    case coFloats: {
+        if (is_nullable) {
+            auto values = config.opt<ConfigOptionFloatsNullable>(pure_key);
+            if (opt_idx < values->size())
+                return double_to_string(values->get_at(opt_idx));
+        }
+        else {
+            auto values = config.opt<ConfigOptionFloats>(pure_key);
+            if (values && opt_idx < values->size())
+                return double_to_string(values->get_at(opt_idx));
+        }
+        return _L("Undefined");
+    }
+    case coString:
+        return from_u8(config.opt_string(pure_key));
+    case coStrings: {
+        const ConfigOptionStrings* strings = config.opt<ConfigOptionStrings>(pure_key);
+        if (strings) {
+            if (pure_key == "compatible_printers" || pure_key == "compatible_prints") {
+                if (strings->empty())
+                    return _L("All");
+                for (size_t id = 0; id < strings->size(); id++)
+                    out += from_u8(strings->get_at(id)) + "\n";
+                out.RemoveLast(1);
+                return out;
+            }
+            if (!strings->empty() && opt_idx < strings->values.size())
+                return from_u8(strings->get_at(opt_idx));
+        }
+        break;
+        }
+    case coFloatOrPercent: {
+        const ConfigOptionFloatOrPercent* opt = config.opt<ConfigOptionFloatOrPercent>(pure_key);
+        if (opt)
+            out = double_to_string(opt->value) + (opt->percent ? "%" : "");
+        return out;
+    }
+    case coFloatsOrPercents: {
+        const auto* values = static_cast<const ConfigOptionVector<FloatOrPercent>*>(option);
+        // Orca: Preset comparison may request the entire vector instead of an indexed entry.
+        if (orig_opt_idx < 0)
+            return from_u8(option->serialize());
+        if (opt_idx < values->size()) {
+            const FloatOrPercent& value = values->get_at(opt_idx);
+            return double_to_string(value.value) + (value.percent ? "%" : "");
+        }
+        return _L("Undefined");
+    }
+    case coEnum: {
+        return get_string_from_enum(pure_key, config,
+            pure_key == "top_surface_pattern" ||
+            pure_key == "bottom_surface_pattern" ||
+            pure_key == "internal_solid_infill_pattern" ||
+            pure_key == "sparse_infill_pattern" ||
+            pure_key == "ironing_pattern" ||
+            pure_key == "support_ironing_pattern" ||
+            pure_key == "support_pattern" ||
+            pure_key == "support_interface_pattern")
+            ;
+    }
+    case coEnums: {
+        return get_string_from_enum(pure_key, config,
+            pure_key == "top_surface_pattern" ||
+            pure_key == "bottom_surface_pattern" ||
+            pure_key == "internal_solid_infill_pattern" ||
+            pure_key == "sparse_infill_pattern" ||
+            pure_key == "ironing_pattern" ||
+            pure_key == "support_ironing_pattern" ||
+            pure_key == "support_pattern" ||
+            pure_key == "support_interface_pattern"
+            , opt_idx);
+    }
+    case coPoint: {
+        Vec2d val = config.opt<ConfigOptionPoint>(pure_key)->value;
+        return from_u8((boost::format("[%1%]") % ConfigOptionPoint(val).serialize()).str());
+    }
+    case coPoints: {
+        //BBS: add bed_exclude_area
+        if (pure_key == "printable_area" || pure_key == "thumbnails") {
+            ConfigOptionPoints points = *config.option<ConfigOptionPoints>(pure_key);
+            //BuildVolume build_volume = {points.values, 0.};
+            return get_thumbnails_string(points.values);
+        }
+        else if (pure_key == "bed_exclude_area") {
+            return get_thumbnails_string(config.option<ConfigOptionPoints>(pure_key)->values);
+        }
+        else if (pure_key == "head_wrap_detect_zone") {
+            return get_thumbnails_string(config.option<ConfigOptionPoints>(pure_key)->values);
+        }
+        else if (pure_key == "wrapping_exclude_area") {
+            return get_thumbnails_string(config.option<ConfigOptionPoints>(pure_key)->values);
+        }
+        Vec2d val = config.opt<ConfigOptionPoints>(pure_key)->get_at(opt_idx);
+        return from_u8((boost::format("[%1%]") % ConfigOptionPoint(val).serialize()).str());
+    }
+    default:
+        break;
+    }
+    return out;
+}
+
+} // namespace GUI
+} // namespace Slic3r
diff --git a/src/slic3r/GUI/ConfigValueFormatter.hpp b/src/slic3r/GUI/ConfigValueFormatter.hpp
new file mode 100644
index 0000000000..67b16f9326
--- /dev/null
+++ b/src/slic3r/GUI/ConfigValueFormatter.hpp
@@ -0,0 +1,26 @@
+#pragma once
+
+#include <string>
+
+#include <wx/string.h>
+
+namespace Slic3r {
+
+class DynamicPrintConfig;
+
+namespace GUI {
+
+// Human-readable value of opt_key (may carry a "#<index>" suffix) in config.
+wxString get_string_value(const std::string& opt_key, const DynamicPrintConfig& config);
+
+// Full label of opt_key; "N/A" when the option is not set.
+wxString get_full_label(const std::string& opt_key, const DynamicPrintConfig& config);
+
+// Strip the "#<index>" suffix (if any) from the option key.
+std::string get_pure_opt_key(const std::string& opt_key);
+
+// Localized label of the currently selected value of an enum option.
+wxString get_string_from_enum(const std::string& opt_key, const DynamicPrintConfig& config, bool is_infill = false, int idx = -1);
+
+} // namespace GUI
+} // namespace Slic3r
diff --git a/src/slic3r/GUI/CreatePresetsDialog.hpp b/src/slic3r/GUI/CreatePresetsDialog.hpp
index 701779b1bf..07811aa144 100644
--- a/src/slic3r/GUI/CreatePresetsDialog.hpp
+++ b/src/slic3r/GUI/CreatePresetsDialog.hpp
@@ -74,7 +74,6 @@ private:
     std::unordered_set<std::string>                                  m_system_filament_types_set;
     std::set<std::string>                                            m_visible_printers;
     CreateType                                                       m_create_type;
-    Button *                                                         m_button_cancel                = nullptr;
     ComboBox *                                                       m_filament_vendor_combobox     = nullptr;
     ::CheckBox *                                                     m_can_not_find_vendor_checkbox = nullptr;
     ComboBox *                                                       m_filament_type_combobox       = nullptr;
diff --git a/src/slic3r/GUI/DailyTips.cpp b/src/slic3r/GUI/DailyTips.cpp
index f585425130..894c0316bb 100644
--- a/src/slic3r/GUI/DailyTips.cpp
+++ b/src/slic3r/GUI/DailyTips.cpp
@@ -1,4 +1,5 @@
 #include "DailyTips.hpp"
+#include "slic3r/GUI/Widgets/Label.hpp"
 
 #ifndef IMGUI_DEFINE_MATH_OPERATORS
 #define IMGUI_DEFINE_MATH_OPERATORS
@@ -245,7 +246,6 @@ DailyTipsPanel::DailyTipsPanel(bool can_expand, DailyTipsLayout layout)
     m_width(0),
     m_height(0),
     m_can_expand(can_expand),
-    m_layout(layout),
     m_uid(DailyTipsPanel::uid++),
     m_dailytips_renderer(std::make_unique<DailyTipsDataRenderer>(layout))
 {
diff --git a/src/slic3r/GUI/DailyTips.hpp b/src/slic3r/GUI/DailyTips.hpp
index 508a8ad7e9..537fed4952 100644
--- a/src/slic3r/GUI/DailyTips.hpp
+++ b/src/slic3r/GUI/DailyTips.hpp
@@ -51,7 +51,6 @@ private:
     int m_uid;
     bool m_first_enter{ false };
     bool m_is_dark{ false };
-    DailyTipsLayout m_layout{ DailyTipsLayout::Vertical };
     float m_fade_opacity{ 1.0f };
 };
 
diff --git a/src/slic3r/GUI/DeviceCore/DevCalib.cpp b/src/slic3r/GUI/DeviceCore/DevCalib.cpp
index cf7ee1d90e..ddf71e0c62 100644
--- a/src/slic3r/GUI/DeviceCore/DevCalib.cpp
+++ b/src/slic3r/GUI/DeviceCore/DevCalib.cpp
@@ -1,5 +1,7 @@
 #include <boost/log/trivial.hpp>
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/I18N.hpp"
+#include "slic3r/GUI/DeviceManager.hpp"
 
 #include "slic3r/GUI/UserNotification.hpp"
 #include "libslic3r/PrintConfig.hpp"
diff --git a/src/slic3r/GUI/DeviceCore/DevConfig.h b/src/slic3r/GUI/DeviceCore/DevConfig.h
index 449b5a7253..b0cdcb936e 100644
--- a/src/slic3r/GUI/DeviceCore/DevConfig.h
+++ b/src/slic3r/GUI/DeviceCore/DevConfig.h
@@ -54,7 +54,7 @@ public:
     void ParseCalibrationConfig(const json& print_json); //cali
 
 private:
-    MachineObject* m_obj;
+    [[maybe_unused]] MachineObject* m_obj;
 
     /*configure vals*/
     // chamber
diff --git a/src/slic3r/GUI/DeviceCore/DevExtensionTool.h b/src/slic3r/GUI/DeviceCore/DevExtensionTool.h
index 02f0b6a213..c3b9c5b0b7 100644
--- a/src/slic3r/GUI/DeviceCore/DevExtensionTool.h
+++ b/src/slic3r/GUI/DeviceCore/DevExtensionTool.h
@@ -31,7 +31,7 @@ protected:
     DevExtensionTool(MachineObject* obj);
 
 private:
-    MachineObject* m_owner = nullptr;
+    [[maybe_unused]] MachineObject* m_owner = nullptr;
 
     enum MountState
     {
diff --git a/src/slic3r/GUI/DeviceCore/DevFilaAmsSetting.h b/src/slic3r/GUI/DeviceCore/DevFilaAmsSetting.h
index efdad308b2..ca59b9fd3e 100644
--- a/src/slic3r/GUI/DeviceCore/DevFilaAmsSetting.h
+++ b/src/slic3r/GUI/DeviceCore/DevFilaAmsSetting.h
@@ -28,7 +28,7 @@ public:
     void SetAutoRefillEnabled(bool enable) { m_enable_auto_refill = enable; }
 
 private:
-    DevFilaSystem* m_owner = nullptr;
+    [[maybe_unused]] DevFilaSystem* m_owner = nullptr;
 
     std::optional<bool> m_enable_detect_on_insert = false;
     bool m_enable_detect_on_powerup = false;
diff --git a/src/slic3r/GUI/DeviceCore/DevFilaBlackList.cpp b/src/slic3r/GUI/DeviceCore/DevFilaBlackList.cpp
index b59499d9d9..7ae990730a 100644
--- a/src/slic3r/GUI/DeviceCore/DevFilaBlackList.cpp
+++ b/src/slic3r/GUI/DeviceCore/DevFilaBlackList.cpp
@@ -4,6 +4,8 @@
 #include <set>
 
 #include "DevFilaBlackList.h"
+#include "slic3r/Utils/NetworkAgent.hpp"
+#include "slic3r/GUI/DeviceManager.hpp"
 #include "DevFilaSystem.h"
 #include "DevManager.h"
 #include "DevConfigUtil.h"
diff --git a/src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp b/src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp
index e0a230969b..881aa75d20 100644
--- a/src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp
+++ b/src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp
@@ -1,5 +1,6 @@
 #include <nlohmann/json.hpp>
 #include "DevFilaSystem.h"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "DevNozzleSystem.h" // DevNozzle / DevNozzleSystem for GetNozzleFlowStringByAmsId
 
 // TODO: remove this include
diff --git a/src/slic3r/GUI/DeviceCore/DevHMS.h b/src/slic3r/GUI/DeviceCore/DevHMS.h
index 205cad77b3..f72d899187 100644
--- a/src/slic3r/GUI/DeviceCore/DevHMS.h
+++ b/src/slic3r/GUI/DeviceCore/DevHMS.h
@@ -21,7 +21,7 @@ public:
     const std::vector<DevHMSItem>& GetHMSItems() const { return m_hms_list; };
 
 private:
-    MachineObject* m_object = nullptr;
+    [[maybe_unused]] MachineObject* m_object = nullptr;
 
     // all hms for this machine
     std::vector<DevHMSItem>  m_hms_list;
diff --git a/src/slic3r/GUI/DeviceCore/DevInfo.h b/src/slic3r/GUI/DeviceCore/DevInfo.h
index 66224888e6..259c277e46 100644
--- a/src/slic3r/GUI/DeviceCore/DevInfo.h
+++ b/src/slic3r/GUI/DeviceCore/DevInfo.h
@@ -34,7 +34,7 @@ private:
     //std::string m_connect_type;
     //std::string m_bind_state;
 
-    MachineObject* m_owner = nullptr;
+    [[maybe_unused]] MachineObject* m_owner = nullptr;
 };
 
 } // namespace Slic3r
\ No newline at end of file
diff --git a/src/slic3r/GUI/DeviceCore/DevManager.cpp b/src/slic3r/GUI/DeviceCore/DevManager.cpp
index 8844303793..feb6301df3 100644
--- a/src/slic3r/GUI/DeviceCore/DevManager.cpp
+++ b/src/slic3r/GUI/DeviceCore/DevManager.cpp
@@ -872,7 +872,7 @@ namespace Slic3r
                         obj->m_is_online = elem["dev_online"].get<bool>();
                     if (elem.contains("dev_model_name") && !elem["dev_model_name"].is_null()) {
                         auto printer_type = elem["dev_model_name"].get<std::string>();
-                        for (const std::pair<std::string, std::vector<std::string>> &pair : device_subseries) {
+                        for (const auto &pair : device_subseries) {
                             auto it = std::find(pair.second.begin(), pair.second.end(), printer_type);
                             if (it != pair.second.end())
                             {
diff --git a/src/slic3r/GUI/DeviceCore/DevMapping.cpp b/src/slic3r/GUI/DeviceCore/DevMapping.cpp
index 165492c9f6..0040bb05f2 100644
--- a/src/slic3r/GUI/DeviceCore/DevMapping.cpp
+++ b/src/slic3r/GUI/DeviceCore/DevMapping.cpp
@@ -1,3 +1,5 @@
+#include <limits>
+
 #include <nlohmann/json.hpp>
 #include "DevMapping.h"
 #include "DevFilaSystem.h"
@@ -270,7 +272,7 @@ namespace Slic3r
         std::set<int> picked_tar;
         for (int k = 0; k < distance_map.size(); k++)
         {
-            float min_val = INT_MAX;
+            float min_val = std::numeric_limits<float>::max();
             int picked_src_idx = -1;
             int picked_tar_idx = -1;
             for (int i = 0; i < distance_map.size(); i++)
diff --git a/src/slic3r/GUI/DeviceCore/DevStatus.h b/src/slic3r/GUI/DeviceCore/DevStatus.h
index 45f76d2239..4ed0d5c416 100644
--- a/src/slic3r/GUI/DeviceCore/DevStatus.h
+++ b/src/slic3r/GUI/DeviceCore/DevStatus.h
@@ -36,7 +36,7 @@ public:
     void ParseStatus(const nlohmann::json& print_jj);
 
 private:
-    MachineObject *m_owner = nullptr;
+    [[maybe_unused]] MachineObject *m_owner = nullptr;
     std::optional<DevJobState> m_job_state; // could be nullopt for some old firmware
 };
 
diff --git a/src/slic3r/GUI/DeviceCore/DevStorage.h b/src/slic3r/GUI/DeviceCore/DevStorage.h
index 537665f778..8ac53b7fea 100644
--- a/src/slic3r/GUI/DeviceCore/DevStorage.h
+++ b/src/slic3r/GUI/DeviceCore/DevStorage.h
@@ -31,7 +31,7 @@ public:
     bool is_timelapse_storage_low(const std::string& storage) const;
 
 private:
-    MachineObject *m_owner;
+    [[maybe_unused]] MachineObject *m_owner;
     SdcardState    m_sdcard_state  { NO_SDCARD };
     // timelapse storage space info (from device push cam data)
     int tl_internal_free_kb{-1};
diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp
index 782574c220..fd60f80d25 100644
--- a/src/slic3r/GUI/DeviceManager.cpp
+++ b/src/slic3r/GUI/DeviceManager.cpp
@@ -1,5 +1,7 @@
 #include "libslic3r/libslic3r.h"
 #include "DeviceManager.hpp"
+#include "HMS.hpp"
+#include "I18N.hpp"
 #include "libslic3r/Time.hpp"
 #include "libslic3r/Thread.hpp"
 #include "slic3r/Utils/NetworkAgent.hpp"
diff --git a/src/slic3r/GUI/DeviceTab/wgtMsgPanel.cpp b/src/slic3r/GUI/DeviceTab/wgtMsgPanel.cpp
index 64195d97a8..16ae8812be 100644
--- a/src/slic3r/GUI/DeviceTab/wgtMsgPanel.cpp
+++ b/src/slic3r/GUI/DeviceTab/wgtMsgPanel.cpp
@@ -1,6 +1,7 @@
 #include "wgtMsgPanel.h"
 
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/I18N.hpp"
 #include "slic3r/GUI/Widgets/Label.hpp"
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include "slic3r/GUI/wxExtensions.hpp"
diff --git a/src/slic3r/GUI/DragCanvas.cpp b/src/slic3r/GUI/DragCanvas.cpp
index 04d51c0861..66a9acecbc 100644
--- a/src/slic3r/GUI/DragCanvas.cpp
+++ b/src/slic3r/GUI/DragCanvas.cpp
@@ -1,6 +1,7 @@
 #include "DragCanvas.hpp"
 #include "wxExtensions.hpp"
 #include "GUI_App.hpp"
+#include "Widgets/StateColor.hpp"
 
 namespace Slic3r { namespace GUI {
 
diff --git a/src/slic3r/GUI/EncodedFilament.cpp b/src/slic3r/GUI/EncodedFilament.cpp
index f9054e7f6d..0cab200386 100644
--- a/src/slic3r/GUI/EncodedFilament.cpp
+++ b/src/slic3r/GUI/EncodedFilament.cpp
@@ -1,7 +1,10 @@
 #include "EncodedFilament.hpp"
+#include <nlohmann/json.hpp>
 
 #include "GUI_App.hpp"
 
+using json = nlohmann::json;
+
 namespace Slic3r
 {
 
diff --git a/src/slic3r/GUI/ExportPresetBundleDialog.cpp b/src/slic3r/GUI/ExportPresetBundleDialog.cpp
index 6d642ee1c1..9d2f26bf6a 100644
--- a/src/slic3r/GUI/ExportPresetBundleDialog.cpp
+++ b/src/slic3r/GUI/ExportPresetBundleDialog.cpp
@@ -1,4 +1,5 @@
 #include "ExportPresetBundleDialog.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "GUI_App.hpp"
 #include "ConfigWizard.hpp"
 #include "I18N.hpp"
@@ -12,7 +13,11 @@
 #include <libslic3r/PresetBundle.hpp>
 #include <wx/string.h>
 #include <miniz.h>
+#include <nlohmann/json.hpp>
 #include <slic3r/GUI/MsgDialog.hpp>
+
+using json = nlohmann::json;
+
 namespace Slic3r { namespace GUI {
 
 ExportPresetBundleDialog::ExportPresetBundleDialog(
diff --git a/src/slic3r/GUI/ExtraRenderers.cpp b/src/slic3r/GUI/ExtraRenderers.cpp
index 18811ef241..3abfdb82ff 100644
--- a/src/slic3r/GUI/ExtraRenderers.cpp
+++ b/src/slic3r/GUI/ExtraRenderers.cpp
@@ -1,6 +1,7 @@
 #include "ExtraRenderers.hpp"
 #include "wxExtensions.hpp"
 #include "GUI.hpp"
+#include "I18N.hpp"
 #include "BitmapComboBox.hpp"
 #include "Plater.hpp"
 #include "Widgets/ComboBox.hpp"
diff --git a/src/slic3r/GUI/ExtrusionCalibration.cpp b/src/slic3r/GUI/ExtrusionCalibration.cpp
index 933e2ac211..1f07823d61 100644
--- a/src/slic3r/GUI/ExtrusionCalibration.cpp
+++ b/src/slic3r/GUI/ExtrusionCalibration.cpp
@@ -1,5 +1,6 @@
 #include "ExtrusionCalibration.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
 #include "MsgDialog.hpp"
 #include "libslic3r/Preset.hpp"
 #include <algorithm>
diff --git a/src/slic3r/GUI/Field.cpp b/src/slic3r/GUI/Field.cpp
index 142cf70522..74ef3f87c8 100644
--- a/src/slic3r/GUI/Field.cpp
+++ b/src/slic3r/GUI/Field.cpp
@@ -11,6 +11,7 @@
 #include "libslic3r/PrintConfig.hpp"
 
 #include <algorithm>
+#include <cmath>
 #include <regex>
 #include <utility>
 #include <cstdint>
@@ -540,51 +541,95 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
     case coStrings:
     case coFloatOrPercent:
     case coFloatsOrPercents: {
-        if ((m_opt.type == coFloatOrPercent || m_opt.type == coFloatsOrPercents) && !str.IsEmpty() &&  str.Last() != '%')
-        {
+        if ((m_opt.type == coFloatOrPercent || m_opt.type == coFloatsOrPercents) && !str.IsEmpty() &&
+            !(m_opt.nullable && str == m_na_value)) {
+            bool update_control = false;
+            wxString numeric_str = str;
             double val = 0.;
+
             const char dec_sep = is_decimal_separator_point() ? '.' : ',';
             const char dec_sep_alt = dec_sep == '.' ? ',' : '.';
-            // Replace the first incorrect separator in decimal number.
-            if (str.Replace(dec_sep_alt, dec_sep, false) != 0)
-                set_value(str, false);
+            // Orca: normalize the decimal separator and optional unit before
+            // detecting the percentage suffix and parsing the numeric part.
+            update_control |= numeric_str.Replace(dec_sep_alt, dec_sep, false) != 0;
+            update_control |= numeric_str.Replace(" ", "", true) != 0;
+            const bool has_literal_unit = numeric_str.EndsWith("mm");
+            if (has_literal_unit) {
+                numeric_str.RemoveLast(2);
+                update_control = true;
+            }
+            bool is_percent = !numeric_str.IsEmpty() && numeric_str.Last() == '%';
+            if (is_percent)
+                numeric_str.RemoveLast();
 
-
-            // remove space and "mm" substring, if any exists
-            str.Replace(" ", "", true);
-            str.Replace("m", "", true);
-
-            if (!str.ToDouble(&val))
-            {
+            if ((has_literal_unit && is_percent) || !numeric_str.ToDouble(&val) || !std::isfinite(val)) {
                 if (!check_value) {
                     m_value.clear();
                     break;
                 }
                 show_error(m_parent, _L("Invalid numeric."));
-                set_value(double_to_string(val), true);
-            }
-            else if (((m_opt.sidetext.rfind("mm/s") != std::string::npos && val > m_opt.max) ||
-                     (m_opt.sidetext.rfind("mm ") != std::string::npos && val > /*1*/m_opt.max_literal)) &&
-                     (m_value.empty() || into_u8(str) != boost::any_cast<std::string>(m_value)))
-            {
-                if (!check_value) {
-                    m_value.clear();
-                    break;
+                numeric_str = double_to_string(std::clamp(0., double(m_opt.min), double(m_opt.max)));
+                is_percent = false;
+                update_control = true;
+            } else {
+                const bool looks_like_missing_percent = !is_percent && !has_literal_unit &&
+                    ((m_opt.sidetext.rfind("mm/s") != std::string::npos && val > m_opt.max) ||
+                     (m_opt.sidetext.rfind("mm ") != std::string::npos && val > m_opt.max_literal));
+                // Orca: validate explicit percentages and literal values before
+                // asking whether an otherwise valid literal was meant as a percentage.
+                const bool out_of_range = !m_opt.is_value_valid(val);
+                if (out_of_range) {
+                    if (!check_value) {
+                        m_value.clear();
+                        break;
+                    }
+                    show_error(m_parent, _L("Value is out of range."));
+                    val = std::clamp(val, double(m_opt.min), double(m_opt.max));
+                    // Orca: retain the inferred percent unit when clamping a
+                    // suspicious unitless value, so 2000 becomes 100%, not 100 mm.
+                    is_percent |= looks_like_missing_percent;
+                    numeric_str = double_to_string(val);
+                    update_control = true;
+                } else {
+                    const bool value_changed = m_value.empty() || into_u8(str) != boost::any_cast<std::string>(m_value);
+                    if (looks_like_missing_percent && value_changed) {
+                        if (!check_value) {
+                            m_value.clear();
+                            break;
+                        }
+
+                        const std::string sidetext = m_opt.sidetext.rfind("mm/s") != std::string::npos ? "mm/s" : "mm";
+                        const wxString stVal       = numeric_str;
+                        const wxString msg_text    = from_u8((boost::format(_utf8(L("Is it %s%% or %s %s?"))) %
+                                                              stVal % stVal % sidetext).str());
+                        WarningDialog dialog(m_parent, msg_text, _L("Parameter validation") + ": " + m_opt_id, wxYES | wxNO);
+                        dialog.SetButtonLabel(wxID_YES, stVal + _L("%"));
+                        dialog.SetButtonLabel(wxID_NO, stVal + " " + _L(sidetext));
+                        dialog.GetSizer()->SetSizeHints(&dialog);
+                        dialog.Fit();
+                        dialog.CenterOnParent();
+                        is_percent = dialog.ShowModal() == wxID_YES;
+                        update_control = true;
+                    }
                 }
 
-                const std::string sidetext = m_opt.sidetext.rfind("mm/s") != std::string::npos ? "mm/s" : "mm";
-                const wxString stVal       = double_to_string(val, 2);
-                const wxString msg_text    = from_u8((boost::format(_utf8(L("Is it %s%% or %s %s?\n"
-                                                                            "YES for %s%%, \n"
-                                                                            "NO for %s %s."))) %
-                                                      stVal % stVal % sidetext % stVal % stVal % sidetext)
-                                                         .str());
-                WarningDialog dialog(m_parent, msg_text, _L("Parameter validation") + ": " + m_opt_id, wxYES | wxNO);
-                if ((val > 100) && dialog.ShowModal() == wxID_YES) {
-                    set_value(from_u8((boost::format("%s%%") % stVal).str()), false /*true*/);
-                    str += "%%";
-                } else
-                    set_value(stVal, false); // it's no needed but can be helpful, when inputted value contained "," instead of "."
+                // Orca: also enforce the literal limit after clamping an explicit mm input.
+                if (!is_percent && m_opt.sidetext.rfind("mm ") != std::string::npos && val > m_opt.max_literal) {
+                    if (!check_value) {
+                        m_value.clear();
+                        break;
+                    }
+                    if (!out_of_range)
+                        show_error(m_parent, _L("Value is out of range."));
+                    val = m_opt.max_literal;
+                    numeric_str = double_to_string(val);
+                    update_control = true;
+                }
+            }
+
+            if (update_control) {
+                str = numeric_str + (is_percent ? "%" : "");
+                set_value(str, true);
             }
         }
         if (m_opt.opt_key == "thumbnails") {
@@ -2154,6 +2199,7 @@ void PrinterAgentChoice::msw_rescale()
 void PluginField::BUILD()
 {
     auto* panel = new wxPanel(m_parent, wxID_ANY);
+    panel->SetBackgroundColour(*wxWHITE);
     wxGetApp().UpdateDarkUI(panel);
     window = panel;
 
@@ -2196,9 +2242,8 @@ void PluginField::rebuild_ui()
     m_rows.clear();
     m_standalone_add_btn = nullptr;
 
-    if (m_values.empty()) {
-        add_empty_state_row();
-    } else {
+    add_empty_state_row();
+    if (!m_values.empty()) {
         for (size_t i = 0; i < m_values.size(); ++i)
             add_plugin_row(display_name_for_value(m_values[i]), i == m_values.size() - 1);
     }
@@ -2215,94 +2260,43 @@ void PluginField::rebuild_ui()
 
 void PluginField::add_empty_state_row()
 {
-    const auto button_size = wxSize(def_width_thinner() * m_em_unit, -1);
-    auto row_sizer = new wxBoxSizer(wxHORIZONTAL);
-
-    wxTextCtrl* display = new wxTextCtrl(window, wxID_ANY, _L("No plugin selected"),
-        wxDefaultPosition, wxSize(def_width_wider() * m_em_unit, wxDefaultCoord),
-        wxTE_READONLY);
-    display->SetEditable(false);
-    wxGetApp().UpdateDarkUI(display);
-    display->SetToolTip(_L("No plugin selected"));
-
-    auto add_btn = new ScalableButton(window, wxID_ANY, "param_add", wxEmptyString,
-        button_size, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true, 16);
-    wxGetApp().UpdateDarkUI(add_btn);
-    add_btn->SetToolTip(_L("Add plugin"));
+    auto add_btn = new Button(window, _L("Add plugin"), "param_add", 0, 16);
+    add_btn->SetStyle(ButtonStyle::Regular, ButtonType::Parameter);
 
     add_btn->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { on_add_clicked(); });
 
-    row_sizer->Add(display, 1, wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
-    row_sizer->Add(add_btn, 0, wxALIGN_CENTER_VERTICAL);
-    m_main_sizer->Add(row_sizer, 0, wxEXPAND);
-
-    PluginRow row;
-    row.display = display;
-    row.add_btn = add_btn;
-    row.sizer = row_sizer;
-    m_rows.push_back(row);
+    m_main_sizer->Add(add_btn, 0, wxEXPAND | wxBOTTOM, window->FromDIP(SidebarProps::ContentMarginV()));
 
     m_standalone_add_btn = add_btn;
 }
 
 void PluginField::add_plugin_row(const wxString& value, bool is_last)
 {
-    const auto button_size = wxSize(def_width_thinner() * m_em_unit, -1);
     auto row_sizer = new wxBoxSizer(wxHORIZONTAL);
 
-    ScalableButton* select_btn = new ScalableButton(window, wxID_ANY, "search", wxEmptyString,
-        button_size, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true, 16);
-    wxGetApp().UpdateDarkUI(select_btn);
-    select_btn->SetToolTip(_L("Select plugin"));
-
-    wxTextCtrl* display = new wxTextCtrl(window, wxID_ANY, value,
-        wxDefaultPosition, wxSize(def_width_wider() * m_em_unit, wxDefaultCoord),
-        wxTE_READONLY);
-    display->SetEditable(false);
-    wxGetApp().UpdateDarkUI(display);
+    ComboBox* display = new ComboBox(window, wxID_ANY, value, wxDefaultPosition, wxDefaultSize, 0, NULL, wxCB_READONLY | CB_NO_DROP_ICON);
+    display->SetIcon("edit");
     display->SetToolTip(get_tooltip_text(value));
 
-    ScalableButton* remove_btn = nullptr;
-    if (!m_opt.readonly) {
-        remove_btn = new ScalableButton(window, wxID_ANY, "cross", wxEmptyString,
-            button_size, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true, 16);
-        wxGetApp().UpdateDarkUI(remove_btn);
-        remove_btn->SetToolTip(_L("Remove plugin"));
-    }
+    ScalableButton* remove_btn = new ScalableButton(window, wxID_ANY, "cross", wxEmptyString,
+        wxDefaultSize, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true, 16);
+    remove_btn->SetToolTip(_L("Remove plugin"));
 
-    ScalableButton* add_btn = nullptr;
-    if (is_last && !m_opt.readonly) {
-        add_btn = new ScalableButton(window, wxID_ANY, "param_add", wxEmptyString,
-            button_size, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true, 16);
-        wxGetApp().UpdateDarkUI(add_btn);
-        add_btn->SetToolTip(_L("Add plugin"));
-        add_btn->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { on_add_clicked(); });
-    }
+    if (m_opt.readonly)
+        remove_btn->Disable();
 
     const size_t row_index = m_rows.size();
-    select_btn->Bind(wxEVT_BUTTON, [this, row_index](wxCommandEvent&) { on_select_clicked(row_index); });
-    if (remove_btn)
-        remove_btn->Bind(wxEVT_BUTTON, [this, row_index](wxCommandEvent&) { on_remove_clicked(row_index); });
+    display->Bind(wxEVT_LEFT_DOWN, [this, row_index](wxMouseEvent&  ) { on_select_clicked(row_index); });
+    remove_btn->Bind(wxEVT_BUTTON, [this, row_index](wxCommandEvent&) { on_remove_clicked(row_index); });
 
-    row_sizer->Add(select_btn, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
-    row_sizer->Add(display, 1, wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
-    if (remove_btn)
-        row_sizer->Add(remove_btn, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
-    if (add_btn)
-        row_sizer->Add(add_btn, 0, wxALIGN_CENTER_VERTICAL);
-    else if (!m_opt.readonly) {
-        // Reserve space equal to the add button so all rows align.
-        row_sizer->Add(button_size.GetWidth(), button_size.GetHeight(), 0, wxALIGN_CENTER_VERTICAL);
-    }
+    row_sizer->Add(display   , 1, wxALIGN_CENTER_VERTICAL);
+    row_sizer->Add(remove_btn, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, window->FromDIP(SidebarProps::ElementSpacing()));
 
-    const int bottom_gap = is_last ? 0 : 4;
-    m_main_sizer->Add(row_sizer, 0, wxEXPAND | (bottom_gap > 0 ? wxBOTTOM : 0), bottom_gap);
+    m_main_sizer->Add(row_sizer, 0, wxEXPAND | wxBOTTOM, window->FromDIP(is_last ? SidebarProps::ContentMarginV() : 4));
 
     PluginRow row;
-    row.select_btn = select_btn;
     row.display = display;
     row.remove_btn = remove_btn;
-    row.add_btn = add_btn;
     row.sizer = row_sizer;
     m_rows.push_back(row);
 }
@@ -2354,9 +2348,9 @@ void PluginField::on_add_clicked()
     m_values.push_back(selected);
     m_value = m_values;
 
-    rebuild_ui();
-
-    on_change_field();
+    // Defer: don't destroy the clicked button from inside its own handler.
+    if(window)
+        window->CallAfter([this]() {rebuild_ui(); on_change_field();});
 }
 
 void PluginField::on_remove_clicked(size_t index)
@@ -2367,8 +2361,9 @@ void PluginField::on_remove_clicked(size_t index)
     m_values.erase(m_values.begin() + index);
     m_value = m_values;
 
-    rebuild_ui();
-    on_change_field();
+    // Defer: don't destroy the clicked button from inside its own handler.
+    if(window)
+        window->CallAfter([this]() {rebuild_ui(); on_change_field();});
 }
 
 wxString PluginField::get_row_value(size_t index) const
@@ -2382,7 +2377,7 @@ void PluginField::set_row_value(size_t index, const wxString& value)
 {
     if (index >= m_rows.size() || !m_rows[index].display)
         return;
-    m_rows[index].display->ChangeValue(value);
+    m_rows[index].display->SetValue(value);
     m_rows[index].display->SetToolTip(get_tooltip_text(value));
 }
 
@@ -2425,14 +2420,10 @@ boost::any& PluginField::get_value()
 void PluginField::enable()
 {
     for (auto& row : m_rows) {
-        if (row.select_btn)
-            row.select_btn->Enable();
         if (row.display)
             row.display->Enable();
         if (row.remove_btn)
             row.remove_btn->Enable();
-        if (row.add_btn)
-            row.add_btn->Enable();
     }
     if (m_standalone_add_btn)
         m_standalone_add_btn->Enable();
@@ -2441,14 +2432,10 @@ void PluginField::enable()
 void PluginField::disable()
 {
     for (auto& row : m_rows) {
-        if (row.select_btn)
-            row.select_btn->Disable();
         if (row.display)
             row.display->Disable();
         if (row.remove_btn)
             row.remove_btn->Disable();
-        if (row.add_btn)
-            row.add_btn->Disable();
     }
     if (m_standalone_add_btn)
         m_standalone_add_btn->Disable();
@@ -2711,7 +2698,8 @@ void ColourPicker::set_value(const boost::any& value, bool change_event)
     auto field = dynamic_cast<wxColourPickerCtrl*>(window);
 
     #ifdef __WXMSW__
-        wxColour clr = (clr_str.IsEmpty() || !clr.IsOk()) ? wxTransparentColour : clr_str;
+        const wxColour parsed_clr(clr_str);
+        wxColour clr = (clr_str.IsEmpty() || !parsed_clr.IsOk()) ? wxTransparentColour : parsed_clr;
         field->SetColour(clr);
         draw_bmp_btn(field, clr);
     #else
@@ -2862,11 +2850,11 @@ void PointCtrl::BUILD()
 	//temp->Add(static_text_y, 0, wxALIGN_CENTER_VERTICAL, 0);
 	temp->Add(y_input);
 
-    x_textctrl->Bind(wxEVT_TEXT_ENTER, ([this](wxCommandEvent e) { propagate_value(x_textctrl); }), x_textctrl->GetId());
-	y_textctrl->Bind(wxEVT_TEXT_ENTER, ([this](wxCommandEvent e) { propagate_value(y_textctrl); }), y_textctrl->GetId());
+	x_textctrl->Bind(wxEVT_TEXT_ENTER, ([this](wxCommandEvent e) { propagate_input_value(x_textctrl); }), x_textctrl->GetId());
+	y_textctrl->Bind(wxEVT_TEXT_ENTER, ([this](wxCommandEvent e) { propagate_input_value(y_textctrl); }), y_textctrl->GetId());
 
-    x_textctrl->Bind(wxEVT_KILL_FOCUS, ([this](wxEvent& e) { e.Skip(); propagate_value(x_textctrl); }), x_textctrl->GetId());
-    y_textctrl->Bind(wxEVT_KILL_FOCUS, ([this](wxEvent& e) { e.Skip(); propagate_value(y_textctrl); }), y_textctrl->GetId());
+	x_textctrl->Bind(wxEVT_KILL_FOCUS, ([this](wxEvent& e) { e.Skip(); propagate_input_value(x_textctrl); }), x_textctrl->GetId());
+	y_textctrl->Bind(wxEVT_KILL_FOCUS, ([this](wxEvent& e) { e.Skip(); propagate_input_value(y_textctrl); }), y_textctrl->GetId());
 
 	// 	// recast as a wxWindow to fit the calling convention
     window = dynamic_cast<wxWindow*>(x_input);
@@ -2915,7 +2903,7 @@ bool PointCtrl::value_was_changed(wxTextCtrl* win)
 	return boost::any_cast<Vec2d>(m_value) != boost::any_cast<Vec2d>(val);
 }
 
-void PointCtrl::propagate_value(wxTextCtrl* win)
+void PointCtrl::propagate_input_value(wxTextCtrl* win)
 {
     if (win->GetValue().empty())
         on_kill_focus();
diff --git a/src/slic3r/GUI/Field.hpp b/src/slic3r/GUI/Field.hpp
index 5d5d549427..3f55bf5c5a 100644
--- a/src/slic3r/GUI/Field.hpp
+++ b/src/slic3r/GUI/Field.hpp
@@ -25,6 +25,7 @@
 #include "wxExtensions.hpp"
 #include "Widgets/SpinInput.hpp"
 #include "Widgets/TextInput.hpp"
+#include "Widgets/ComboBox.hpp"
 
 #ifdef __WXMSW__
 #define wxMSW true
@@ -532,10 +533,8 @@ public:
 
 private:
     struct PluginRow {
-        ScalableButton* select_btn { nullptr };
-        wxTextCtrl*     display { nullptr };
+        ComboBox*       display { nullptr };
         ScalableButton* remove_btn { nullptr };
-        ScalableButton* add_btn { nullptr };
         wxBoxSizer*     sizer { nullptr };
     };
 
@@ -553,7 +552,7 @@ private:
     wxBoxSizer*             m_main_sizer { nullptr };
     std::vector<PluginRow>  m_rows;
     std::vector<std::string> m_values;
-    ScalableButton*         m_standalone_add_btn { nullptr };
+    Button*                  m_standalone_add_btn { nullptr };
     std::function<std::string()> m_selector;
 };
 
@@ -628,8 +627,10 @@ private:
     void on_button_click(wxCommandEvent &WXUNUSED(ev));
     void save_colors_to_config();
 private:
+#if !defined(__linux__) && !defined(__LINUX__)
     wxColourData*  m_clrData{nullptr};
     wxColourPickerWidget* m_picker_widget{nullptr};
+#endif
 };
 
 class PointCtrl : public Field {
@@ -649,7 +650,7 @@ public:
 	void			BUILD()  override;
 	bool			value_was_changed(wxTextCtrl* win);
     // Propagate value from field to the OptionGroupe and Config after kill_focus/ENTER
-    void            propagate_value(wxTextCtrl* win);
+	void			propagate_input_value(wxTextCtrl* win);
 	void			set_value(const Vec2d& value, bool change_event = false);
 	void			set_value(const boost::any& value, bool change_event = false) override;
 	boost::any&		get_value() override;
diff --git a/src/slic3r/GUI/FilamentBitmapUtils.cpp b/src/slic3r/GUI/FilamentBitmapUtils.cpp
index 1f51fc79b3..3af3d1ad01 100644
--- a/src/slic3r/GUI/FilamentBitmapUtils.cpp
+++ b/src/slic3r/GUI/FilamentBitmapUtils.cpp
@@ -1,16 +1,66 @@
 #include <wx/dcmemory.h>
+#include <wx/dcgraph.h>
 #include <wx/graphics.h>
+#include <wx/settings.h>
+#include <wx/window.h>
 #include <algorithm>
 #include <cmath>
+#include <map>
+#include <numeric>
+#include <string>
+#include <tuple>
 
 #include "EncodedFilament.hpp"
 #include "FilamentBitmapUtils.hpp"
 #include "GUI_App.hpp"
+#include "GuiColor.hpp"
+#include "I18N.hpp"
+#include "Widgets/Label.hpp"
+#include "Widgets/StateColor.hpp"
 #include "libslic3r/FilamentMixer.hpp"
 #include "libslic3r/PrintConfig.hpp"
 
 namespace Slic3r { namespace GUI {
 
+// Barycentric utilities for a ternary (triangle) ratio picker.
+double tri_signed_area2(TriPoint a, TriPoint b, TriPoint c)
+{
+    return (b.x - a.x) * (c.y - a.y) - (c.x - a.x) * (b.y - a.y);
+}
+
+bool tri_contains(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2)
+{
+    double total = tri_signed_area2(v0, v1, v2);
+    if (std::abs(total) < 1e-9) return false;
+    double s0 = tri_signed_area2(p, v1, v2) / total;
+    double s1 = tri_signed_area2(v0, p, v2) / total;
+    double s2 = 1.0 - s0 - s1;
+    return s0 >= -0.001 && s1 >= -0.001 && s2 >= -0.001;
+}
+
+void tri_barycentric(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2,
+                     double& w0, double& w1, double& w2)
+{
+    double total = std::abs(tri_signed_area2(v0, v1, v2));
+    if (total < 1e-9) { w0 = w1 = w2 = 1.0 / 3.0; return; }
+    w0 = std::abs(tri_signed_area2(p, v1, v2)) / total;
+    w1 = std::abs(tri_signed_area2(v0, p, v2)) / total;
+    w2 = 1.0 - w0 - w1;
+    w0 = std::clamp(w0, 0.0, 1.0);
+    w1 = std::clamp(w1, 0.0, 1.0);
+    w2 = std::clamp(w2, 0.0, 1.0);
+    double s = w0 + w1 + w2;
+    if (s > 0) { w0 /= s; w1 /= s; w2 /= s; }
+}
+
+TriPoint tri_clamp(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2)
+{
+    double w0, w1, w2;
+    tri_barycentric(p, v0, v1, v2, w0, w1, w2);
+    return {w0 * v0.x + w1 * v1.x + w2 * v2.x,
+            w0 * v0.y + w1 * v1.y + w2 * v2.y};
+}
+
 void fill_gradient_rect_east(wxDC& dc, const wxRect& rect, const wxColour& from, const wxColour& to)
 {
     if (rect.width <= 0 || rect.height <= 0) return;
@@ -73,7 +123,7 @@ std::vector<wxColour> sample_gradient_ramp(const wxColour& first,
 // Resolve the curve a gradient slot is sampled with, mirroring the slicer's fallback in
 // ToolOrdering: a custom curve wins, otherwise a straight line between gradient_range's
 // endpoints, otherwise the 0.10 -> 0.90 default.
-static Slic3r::GradientCurve mixed_gradient_curve(const Slic3r::DynamicPrintConfig& cfg, size_t slot)
+Slic3r::GradientCurve mixed_gradient_curve(const Slic3r::DynamicPrintConfig& cfg, size_t slot)
 {
     const auto* curve_opt = cfg.option<ConfigOptionStrings>("filament_mixed_gradient_curve");
     if (curve_opt && slot < curve_opt->values.size() && !curve_opt->values[slot].empty()) {
@@ -449,4 +499,378 @@ void recompute_mixed_slot_colors(std::vector<wxColour>& colors,
     }
 }
 
+namespace {
+
+// Layout ratios of the gradient plot rect, copied from GradientCurveEditor so the read-only
+// preview and the interactive editor stay pixel-identical. Plot rect is square 1:1; the
+// right/bottom margins host the axis arrows and labels.
+constexpr double kPlotLeftRatio   = 0.0316;
+constexpr double kPlotRightRatio  = 0.6766;
+constexpr double kPlotTopRatio    = 0.1529;
+constexpr double kPlotBottomRatio = 0.8474;
+constexpr int    kGridDivisions   = 9;    // 10 grid lines including the outer borders.
+constexpr int    kStrokeAxis      = 2;    // axis line width (px, no DPI scaling)
+constexpr int    kAxisArrowHalf   = 5;    // half-base of the axis arrow triangle (DIP)
+constexpr int    kAxisArrowLen    = 10;   // length of the axis arrow triangle (DIP)
+constexpr int    kPointRadius     = 4;    // anchor outer radius (DIP)
+constexpr float  kBgSimilarThreshold = 15.0f;
+constexpr int    kOutlineExtraDip    = 2;
+constexpr double kTriangleMarginDip  = 20.0;
+
+// Quadratic blend that never goes out of gamut, matching MixedFilamentDialog::blend_colors.
+wxColour lerp_blend(const wxColour& a, const wxColour& b, double ratio_a)
+{
+    unsigned char r, g, bl;
+    Slic3r::filament_mixer_lerp(a.Red(), a.Green(), a.Blue(),
+                                b.Red(), b.Green(), b.Blue(),
+                                static_cast<float>(1.0 - ratio_a), &r, &g, &bl);
+    return wxColour(r, g, bl);
+}
+
+// DIP conversion for these free functions: unlike the wxWindow member FromDIP, it needs the
+// window parameter explicitly; nullptr picks the app's default DPI like the Publish dialog does.
+int dip_px(int v) { return wxWindow::FromDIP(v, nullptr); }
+
+} // namespace
+
+wxRect mixed_gradient_plot_rect(const wxSize& sz)
+{
+    const int x  = static_cast<int>(std::lround(sz.x * kPlotLeftRatio));
+    const int y  = static_cast<int>(std::lround(sz.y * kPlotTopRatio));
+    const int x2 = static_cast<int>(std::lround(sz.x * kPlotRightRatio));
+    const int y2 = static_cast<int>(std::lround(sz.y * kPlotBottomRatio));
+    const int side = std::max(1, std::min(x2 - x, y2 - y));
+    return wxRect(x, y, side, side);
+}
+
+void draw_mixed_gradient_plot(wxDC& raw_dc, const wxSize& canvas,
+                              const std::vector<MixedGradientCurve>& curves,
+                              const std::vector<wxPoint2DDouble>& anchors,
+                              const MixedGradientTheme& theme)
+{
+    // Draw into an internal opaque buffer so wxGCDC text/curves anti-alias against a solid
+    // background (never a transparent one), then blit the finished image onto the caller's
+    // buffered paint DC. wxGCDC cannot wrap a generic wxDC&, so the buffer is always a
+    // wxMemoryDC -- the one type wxGCDC accepts on every platform.
+    if (canvas.x <= 0 || canvas.y <= 0)
+        return;
+    const wxRect rc = mixed_gradient_plot_rect(canvas);
+    if (rc.width <= 0 || rc.height <= 0)
+        return;
+
+    wxBitmap buf(canvas);
+    wxMemoryDC memdc(buf);
+    memdc.SetBackground(wxBrush(theme.background));
+    memdc.Clear();
+    wxGCDC dc(memdc);
+    wxGraphicsContext* gc = dc.GetGraphicsContext();
+
+    // 10x10 light grid (10 lines including outer borders, 9 equal divisions).
+    dc.SetPen(wxPen(theme.grid, 1));
+    for (int i = 0; i <= kGridDivisions; ++i) {
+        const int x = rc.x + rc.width  * i / kGridDivisions;
+        const int y = rc.y + rc.height * i / kGridDivisions;
+        dc.DrawLine(x, rc.y, x, rc.y + rc.height);
+        dc.DrawLine(rc.x, y, rc.x + rc.width, y);
+    }
+
+    // Set the label font first so text width measurements drive arrow / label placement.
+    wxFont label_font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
+    label_font.SetPointSize(std::max(7, label_font.GetPointSize() - 1));
+    dc.SetFont(label_font);
+
+    const wxString axis_y_title = _L("Material Ratio");
+    const wxString axis_x_title = _L("Model Height");
+    const wxString pct_text     = wxT("100%");
+    const wxSize   x_title_sz   = dc.GetTextExtent(axis_x_title);
+    const wxSize   y_title_sz   = dc.GetTextExtent(axis_y_title);
+
+    wxFont strong_font = label_font;
+    strong_font.SetWeight(wxFONTWEIGHT_SEMIBOLD);
+    dc.SetFont(strong_font);
+    const wxSize pct_text_sz = dc.GetTextExtent(pct_text);
+    dc.SetFont(label_font);
+
+    // Axes (grey 700) with filled triangle arrows. Y-axis extends above the plot top to the
+    // canvas top edge; X-axis extends past the plot right toward the canvas right edge.
+    const int arrow_half = dip_px(kAxisArrowHalf);
+    const int arrow_len  = dip_px(kAxisArrowLen);
+    dc.SetPen(wxPen(theme.axis, kStrokeAxis));
+    dc.SetBrush(wxBrush(theme.axis));
+
+    const int y_axis_x           = rc.x;
+    const int y_title_pct_gap    = dip_px(1);
+    const int y_title_bottom_pad = dip_px(2);
+    const int y_title_y = std::max(0, rc.y - y_title_sz.y - y_title_pct_gap - pct_text_sz.y - y_title_bottom_pad);
+    const int y_arrow_tip_y = y_title_y;
+    const int y_arrow_ty    = y_arrow_tip_y + arrow_len;
+    dc.DrawLine(y_axis_x, y_arrow_ty, y_axis_x, rc.y + rc.height);
+    {
+        wxPoint tri[3] = {
+            wxPoint(y_axis_x,              y_arrow_tip_y),
+            wxPoint(y_axis_x - arrow_half, y_arrow_ty),
+            wxPoint(y_axis_x + arrow_half, y_arrow_ty),
+        };
+        dc.DrawPolygon(3, tri);
+    }
+
+    const int x_axis_y      = rc.y + rc.height;
+    const int x_label_gap   = dip_px(4);
+    const int x_edge_pad    = dip_px(6);
+    const int x_arrow_ideal = rc.x + rc.width + dip_px(10);
+    const int x_arrow_max   = canvas.x - x_title_sz.x - x_label_gap - x_edge_pad - arrow_len;
+    const int x_arrow_tx    = std::max(rc.x + rc.width + arrow_len, std::min(x_arrow_ideal, x_arrow_max));
+    const int x_arrow_tip_x = x_arrow_tx + arrow_len;
+    const int x_title_x     = x_arrow_tip_x + x_label_gap;
+    dc.DrawLine(rc.x, x_axis_y, x_arrow_tx, x_axis_y);
+    {
+        wxPoint tri[3] = {
+            wxPoint(x_arrow_tip_x,          x_axis_y),
+            wxPoint(x_arrow_tx,             x_axis_y - arrow_half),
+            wxPoint(x_arrow_tx,             x_axis_y + arrow_half),
+        };
+        dc.DrawPolygon(3, tri);
+    }
+
+    // Labels: "Material Ratio" and the leading "100%" share the same left x; the trailing
+    // "Model Height" follows the X-axis arrow tip (already clamped to make room).
+    const int label_left_x = y_axis_x + dip_px(10);
+    dc.SetTextForeground(theme.label);
+    dc.DrawText(axis_y_title, label_left_x, y_title_y);
+
+    dc.SetFont(strong_font);
+    dc.SetTextForeground(theme.label_strong);
+    dc.DrawText(pct_text, label_left_x, y_title_y + y_title_sz.y + y_title_pct_gap);
+
+    dc.DrawText(pct_text, rc.x + rc.width - pct_text_sz.x, x_axis_y);
+    dc.SetFont(label_font);
+    dc.SetTextForeground(theme.label);
+    dc.DrawText(axis_x_title, x_title_x, x_axis_y - x_title_sz.y / 2);
+
+    if (!gc)
+        return;
+
+    // Outline only when the curve colour is perceptually close to the background; otherwise the
+    // plain filament colour reads fine and the extra stroke would look heavy.
+    auto needs_outline = [&](const wxColour& c) {
+        return calc_color_distance(c, theme.background) < kBgSimilarThreshold;
+    };
+
+    // Only the geometry goes through the graphics context: dc.DrawLines() takes integer wxPoint
+    // and would quantize the curve back to whole pixels. The pen is still set on the dc, which
+    // forwards it here while keeping its own cached state in sync for later dc drawing.
+    auto draw_polyline = [&](const MixedGradientCurve& curve) {
+        if (curve.points.size() < 2)
+            return;
+        dc.SetPen(wxPen(curve.colour, dip_px(curve.stroke_dip)));
+        gc->StrokeLines(curve.points.size(), curve.points.data());
+    };
+
+    for (const MixedGradientCurve& curve : curves) {
+        if (needs_outline(curve.colour))
+            draw_polyline({curve.points, theme.outline, curve.stroke_dip + kOutlineExtraDip});
+        draw_polyline(curve);
+    }
+
+    // Control points: hollow circle with axis-colour border, theme-aware fill, drawn with a
+    // sub-pixel centre so the ring stays centred on the curve.
+    if (!anchors.empty()) {
+        const double r = dip_px(kPointRadius);
+        dc.SetPen(wxPen(theme.axis, 1));
+        dc.SetBrush(wxBrush(theme.point_fill));
+        for (const wxPoint2DDouble& p : anchors)
+            gc->DrawEllipse(p.m_x - r, p.m_y - r, r * 2, r * 2);
+    }
+
+    memdc.SelectObject(wxNullBitmap);
+    raw_dc.DrawBitmap(buf, 0, 0);
+}
+
+void draw_mixed_ratio_blend_bar(wxDC& dc, const wxRect& rect, const wxColour& first,
+                                const wxColour& second, double second_fraction)
+{
+    if (rect.width <= 0 || rect.height <= 0)
+        return;
+    for (int x = 0; x < rect.width; ++x) {
+        const double t = rect.width > 1 ? double(x) / rect.width : 0.0;
+        const wxColour c = lerp_blend(first, second, 1.0 - t);
+        dc.SetPen(wxPen(c));
+        dc.DrawLine(rect.x + x, rect.y, rect.x + x, rect.y + rect.height);
+    }
+
+    // Fixed in both themes, like the triangle picker's drag handle: the divider is drawn over
+    // blended filament colour, so it has to keep its contrast against data rather than chrome.
+    const int div_x = rect.x + static_cast<int>(second_fraction * rect.width);
+    dc.SetPen(wxPen(wxColour(80, 80, 80), dip_px(4)));
+    dc.DrawLine(div_x, rect.y, div_x, rect.y + rect.height);
+    dc.SetPen(wxPen(*wxWHITE, dip_px(2)));
+    dc.DrawLine(div_x, rect.y, div_x, rect.y + rect.height);
+}
+
+void draw_mixed_ratio_segments(wxDC& dc, const wxRect& rect, const std::vector<wxColour>& colours,
+                               const std::vector<double>& shares)
+{
+    const size_t n = std::min(colours.size(), shares.size());
+    if (n == 0 || rect.width <= 0 || rect.height <= 0)
+        return;
+    std::vector<double> norm = shares;
+    double total = 0.0;
+    for (double s : norm)
+        total += s;
+    if (total <= 0.0) {
+        norm.assign(n, 1.0 / n);
+        total = 1.0;
+    }
+    auto share_to_px = [&](double share_sum) { return rect.x + int(std::lround(share_sum / total * double(rect.width))); };
+    int x0 = rect.x;
+    std::vector<wxRect> segs(n);
+    for (size_t i = 0; i < n; ++i) {
+        int x1 = rect.x + rect.width;
+        if (i + 1 < n)
+            x1 = share_to_px(std::accumulate(norm.begin(), norm.begin() + i + 1, 0.0));
+        segs[i] = wxRect(x0, rect.y, std::max(1, x1 - x0), rect.height);
+        x0      = segs[i].GetRight() + 1;
+    }
+    for (size_t i = 0; i < n; ++i) {
+        dc.SetPen(*wxTRANSPARENT_PEN);
+        dc.SetBrush(wxBrush(colours[i]));
+        dc.DrawRectangle(segs[i]);
+    }
+    dc.SetBrush(*wxTRANSPARENT_BRUSH);
+    dc.SetPen(wxPen(StateColor::darkModeColorFor(wxColour("#ACACAC")), 1));
+    dc.DrawRectangle(rect);
+}
+
+namespace {
+
+struct TriCacheKey
+{
+    int w, h;
+    int c0r, c0g, c0b, c1r, c1g, c1b, c2r, c2g, c2b;
+    int bg_r, bg_g, bg_b, ol_r, ol_g, ol_b;
+    bool operator<(const TriCacheKey& o) const
+    {
+        return std::tie(w, h, c0r, c0g, c0b, c1r, c1g, c1b, c2r, c2g, c2b, bg_r, bg_g, bg_b, ol_r, ol_g, ol_b) <
+               std::tie(o.w, o.h, o.c0r, o.c0g, o.c0b, o.c1r, o.c1g, o.c1b, o.c2r, o.c2g, o.c2b, o.bg_r, o.bg_g, o.bg_b, o.ol_r, o.ol_g, o.ol_b);
+    }
+};
+
+std::map<TriCacheKey, wxBitmap>& tri_cache()
+{
+    static std::map<TriCacheKey, wxBitmap> cache;
+    return cache;
+}
+
+} // namespace
+
+std::array<TriPoint, 3> mixed_triangle_vertices(const wxSize& size, double margin_dip)
+{
+    const double pw = size.GetWidth(), ph = size.GetHeight();
+    const double margin = dip_px(int(margin_dip));
+    const double avail  = std::min(pw, ph) - 2.0 * margin;
+    const double side   = avail;
+    const double tri_h  = side * std::sqrt(3.0) / 2.0;
+    const double cx     = pw / 2.0;
+    const double top_y  = (ph - tri_h) / 2.0;
+    return {{{cx, top_y}, {cx - side / 2.0, top_y + tri_h}, {cx + side / 2.0, top_y + tri_h}}};
+}
+
+void draw_mixed_triangle_picker(wxDC& dc, const wxSize& size, const std::array<wxColour, 3>& colours,
+                                const std::array<double, 3>& weights, const MixedTriangleTheme& theme)
+{
+    if (size.GetWidth() <= 0 || size.GetHeight() <= 0)
+        return;
+    const std::array<TriPoint, 3> v = mixed_triangle_vertices(size, kTriangleMarginDip);
+
+    dc.SetBrush(wxBrush(theme.background));
+    dc.SetPen(*wxTRANSPARENT_PEN);
+    dc.DrawRectangle(0, 0, size.GetWidth(), size.GetHeight());
+
+    const wxColour& c0 = colours[0];
+    const wxColour& c1 = colours[1];
+    const wxColour& c2 = colours[2];
+    const TriCacheKey key{size.GetWidth(), size.GetHeight(),
+                          c0.Red(), c0.Green(), c0.Blue(),
+                          c1.Red(), c1.Green(), c1.Blue(),
+                          c2.Red(), c2.Green(), c2.Blue(),
+                          theme.background.Red(), theme.background.Green(), theme.background.Blue(),
+                          theme.outline.Red(), theme.outline.Green(), theme.outline.Blue()};
+
+    wxBitmap& bmp = tri_cache()[key];
+    if (!bmp.IsOk()) {
+        bmp = wxBitmap(size.GetWidth(), size.GetHeight(), 24);
+        wxMemoryDC mdc(bmp);
+        mdc.SetBrush(wxBrush(theme.background));
+        mdc.SetPen(*wxTRANSPARENT_PEN);
+        mdc.DrawRectangle(0, 0, size.GetWidth(), size.GetHeight());
+
+        const int min_y = int(std::min({v[0].y, v[1].y, v[2].y}));
+        const int max_y = int(std::max({v[0].y, v[1].y, v[2].y}));
+        const int min_x = int(std::min({v[0].x, v[1].x, v[2].x}));
+        const int max_x = int(std::max({v[0].x, v[1].x, v[2].x}));
+        for (int py = min_y; py <= max_y; ++py) {
+            for (int px = min_x; px <= max_x; ++px) {
+                const TriPoint p = {double(px), double(py)};
+                if (!tri_contains(p, v[0], v[1], v[2]))
+                    continue;
+                double w0, w1, w2;
+                tri_barycentric(p, v[0], v[1], v[2], w0, w1, w2);
+                unsigned char mr, mg, mb;
+                if (w0 + w1 > 1e-6) {
+                    float t01 = float(w1 / (w0 + w1));
+                    Slic3r::filament_mixer_lerp(c0.Red(), c0.Green(), c0.Blue(), c1.Red(), c1.Green(), c1.Blue(), t01, &mr, &mg, &mb);
+                    Slic3r::filament_mixer_lerp(mr, mg, mb, c2.Red(), c2.Green(), c2.Blue(), float(w2), &mr, &mg, &mb);
+                } else {
+                    mr = c2.Red(); mg = c2.Green(); mb = c2.Blue();
+                }
+                mdc.SetPen(wxPen(wxColour(mr, mg, mb)));
+                mdc.DrawPoint(px, py);
+            }
+        }
+
+        mdc.SetPen(wxPen(theme.outline, 1));
+        mdc.SetBrush(*wxTRANSPARENT_BRUSH);
+        const wxPoint pts[3] = {{int(v[0].x), int(v[0].y)}, {int(v[1].x), int(v[1].y)}, {int(v[2].x), int(v[2].y)}};
+        mdc.DrawPolygon(3, pts);
+        mdc.SelectObject(wxNullBitmap);
+
+        // Keep the cache from growing without bound across DPI/size changes.
+        if (tri_cache().size() > 6) {
+            auto& cache = tri_cache();
+            cache.erase(cache.begin());
+        }
+    }
+    dc.DrawBitmap(bmp, 0, 0);
+
+    // Published-ratio marker (read-only twin of the editor's drag handle).
+    const double w0 = weights[0], w1 = weights[1], w2 = weights[2];
+    const int hx = int(w0 * v[0].x + w1 * v[1].x + w2 * v[2].x);
+    const int hy = int(w0 * v[0].y + w1 * v[1].y + w2 * v[2].y);
+    dc.SetBrush(*wxWHITE_BRUSH);
+    dc.SetPen(wxPen(theme.ring, dip_px(2)));
+    dc.DrawCircle(hx, hy, dip_px(5));
+}
+
+void draw_mixed_triangle_labels(wxDC& dc, const wxSize& size, const std::array<double, 3>& weights,
+                                const MixedTriangleTheme& theme)
+{
+    const std::array<TriPoint, 3> v = mixed_triangle_vertices(size, kTriangleMarginDip);
+    dc.SetFont(::Label::Body_12);
+    dc.SetTextForeground(theme.label);
+
+    // "Ratio" title, sitting above the top vertex.
+    const wxString title = _L("Ratio");
+    dc.DrawText(title, dip_px(2), std::max(0, int(v[0].y - dc.GetTextExtent(title).GetHeight() - dip_px(4))));
+
+    for (int i = 0; i < 3; ++i) {
+        const wxString text = wxString::Format("%d%%", int(std::lround(weights[i] * 100.0)));
+        const wxSize tsz    = dc.GetTextExtent(text);
+        int lx = int(v[i].x - tsz.GetWidth() / 2.0);
+        int ly = (i == 0) ? int(v[i].y - tsz.GetHeight() - dip_px(4)) : int(v[i].y + dip_px(3));
+        ly = std::clamp(ly, 0, size.GetHeight() - tsz.GetHeight());
+        lx = std::clamp(lx, 0, size.GetWidth() - tsz.GetWidth());
+        dc.DrawText(text, lx, ly);
+    }
+}
+
 }} // namespace Slic3r::GUI
\ No newline at end of file
diff --git a/src/slic3r/GUI/FilamentBitmapUtils.hpp b/src/slic3r/GUI/FilamentBitmapUtils.hpp
index 11696f3401..687d34a825 100644
--- a/src/slic3r/GUI/FilamentBitmapUtils.hpp
+++ b/src/slic3r/GUI/FilamentBitmapUtils.hpp
@@ -5,6 +5,9 @@
 #include <wx/colour.h>
 #include <wx/dc.h>
 #include <wx/gdicmn.h>
+#include <wx/geometry.h>
+#include <wx/graphics.h>
+#include <array>
 #include <vector>
 
 // Orca: forward-declare so the header is self-contained outside libslic3r_gui's
@@ -13,6 +16,16 @@ namespace Slic3r { class DynamicPrintConfig; struct GradientCurve; }
 
 namespace Slic3r { namespace GUI {
 
+// Barycentric utilities for a ternary (triangle) ratio picker, shared by the mixed-filament
+// editor and the Publish dialog's read-only definition preview.
+struct TriPoint { double x, y; };
+
+double tri_signed_area2(TriPoint a, TriPoint b, TriPoint c);
+bool tri_contains(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2);
+void tri_barycentric(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2,
+                     double& w0, double& w1, double& w2);
+TriPoint tri_clamp(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2);
+
 // Fills a rect with a west->east linear gradient by drawing solid 1px columns.
 // Use instead of wxDC::GradientFillLinear, whose CoreGraphics (CGShading) backend
 // fails to render on some macOS builds; solid fills are unaffected.
@@ -51,6 +64,12 @@ std::vector<wxColour> sample_gradient_ramp(const wxColour& first,
 // destination's height in pixels.
 std::vector<wxColour> mixed_gradient_ramp(const Slic3r::DynamicPrintConfig& cfg, size_t slot, int steps);
 
+// Resolve the curve a gradient slot is sampled with: the custom curve wins when it has at
+// least two points, otherwise a straight line between gradient_range's endpoints, otherwise
+// the 0.10 -> 0.90 default. Mirrors the slicer's ToolOrdering fallback so every preview
+// agrees with what gets sliced. Always returns a two-point curve.
+Slic3r::GradientCurve mixed_gradient_curve(const Slic3r::DynamicPrintConfig& cfg, size_t slot);
+
 // Fill rect with a ramp, ramp.front() along the bottom edge.
 void fill_gradient_ramp_rect(wxDC& dc, const wxRect& rect, const std::vector<wxColour>& ramp);
 
@@ -63,6 +82,81 @@ wxBitmap create_gradient_ramp_bitmap(const std::vector<wxColour>& ramp, const wx
 void recompute_mixed_slot_colors(std::vector<wxColour>& colors,
                                  const Slic3r::DynamicPrintConfig& cfg);
 
+// --- Gradient plot (shared by GradientCurveEditor and the Publish dialog's read-only
+// preview). The plot is a square 1:1 rect laid out with the editor's ratios so both
+// render identically; curves are drawn as sub-pixel anti-aliased polylines through
+// wxGCDC so they never quantize to whole pixels.
+
+// One curve of the plot: screen-space sub-pixel points already mapped into the plot
+// rect, the stroke colour and the stroke width in DIP.
+struct MixedGradientCurve
+{
+    std::vector<wxPoint2DDouble> points;
+    wxColour                     colour;
+    int                          stroke_dip;
+};
+
+// Theme tokens, resolved by the caller through StateColor::darkModeColorFor.
+struct MixedGradientTheme
+{
+    wxColour background;   // for near-background outline detection
+    wxColour grid;         // grid line
+    wxColour axis;         // axis + arrow fill
+    wxColour label;        // "Material Ratio" / "Model Height"
+    wxColour label_strong; // "100%"
+    wxColour outline;      // near-background curve lift
+    wxColour point_fill;   // anchor fill
+};
+
+// Square 1:1 plot rect inside `canvas`, using the editor's plot ratios.
+wxRect mixed_gradient_plot_rect(const wxSize& canvas);
+
+// Draw the whole plot (grid, axes + arrowheads, axis labels, each curve with an optional
+// near-background outline, and anchor circles). `anchors` are empty when the caller has
+// none to show. `dc` is the caller's buffered paint DC; a wxGCDC is created inside so the
+// geometry gets anti-aliased.
+void draw_mixed_gradient_plot(wxDC& dc, const wxSize& canvas,
+                              const std::vector<MixedGradientCurve>& curves,
+                              const std::vector<wxPoint2DDouble>& anchors,
+                              const MixedGradientTheme& theme);
+
+// --- Ratio bar (2-component continuous blend + divider, matching MixedFilamentDialog).
+// Colours blend first->second across the rect; the divider marks `second_fraction` of the
+// rect's width (the second component's share, 0..1).
+void draw_mixed_ratio_blend_bar(wxDC& dc, const wxRect& rect, const wxColour& first,
+                                const wxColour& second, double second_fraction);
+
+// Fallback ratio bar for N>2 non-gradient slots: one solid segment per component,
+// widths proportional to shares. Label text (the "NN%" inside wide-enough segments) is
+// the caller's concern.
+void draw_mixed_ratio_segments(wxDC& dc, const wxRect& rect, const std::vector<wxColour>& colours,
+                               const std::vector<double>& shares);
+
+// --- Triangle picker (3-component), shared by MixedFilamentDialog and the Publish preview.
+struct MixedTriangleTheme
+{
+    wxColour background;
+    wxColour outline;     // triangle border
+    wxColour ring;        // drag-handle ring
+    wxColour label;       // "Ratio" title + per-vertex labels
+};
+
+// The three vertices of the read-only/miniature triangle inside a `size` square panel,
+// with `margin_dip` inset. Order: top, bottom-left, bottom-right.
+std::array<TriPoint, 3> mixed_triangle_vertices(const wxSize& size, double margin_dip = 20.0);
+
+// Draw background, the cached barycentric fill, the outline and the drag-handle marker.
+// `weights` are the three barycentric shares (sum 1). The "Ratio" title and per-vertex
+// percentage labels are drawn by the caller so the interactive editor can keep its own
+// live child labels while the read-only preview draws them as text.
+void draw_mixed_triangle_picker(wxDC& dc, const wxSize& size, const std::array<wxColour, 3>& colours,
+                                const std::array<double, 3>& weights, const MixedTriangleTheme& theme);
+
+// Draw the "Ratio" title plus one "NN%" label per vertex (used by the read-only preview;
+// the interactive editor positions its own live labels instead).
+void draw_mixed_triangle_labels(wxDC& dc, const wxSize& size, const std::array<double, 3>& weights,
+                                const MixedTriangleTheme& theme);
+
 }} // namespace Slic3r::GUI
 
 #endif // slic3r_GUI_FilamentBitmapUtils_hpp_
\ No newline at end of file
diff --git a/src/slic3r/GUI/FilamentMapPanel.cpp b/src/slic3r/GUI/FilamentMapPanel.cpp
index 81117bc2a6..0f3cc7217d 100644
--- a/src/slic3r/GUI/FilamentMapPanel.cpp
+++ b/src/slic3r/GUI/FilamentMapPanel.cpp
@@ -1,5 +1,6 @@
 #include "FilamentMapPanel.hpp"
 #include "GUI_App.hpp"
+#include "I18N.hpp"
 #include "Plater.hpp"
 #include "Widgets/MultiNozzleSync.hpp" // manuallySetNozzleCount producer for extruder_nozzle_stats
 #include <algorithm>
diff --git a/src/slic3r/GUI/GCodeViewer.cpp b/src/slic3r/GUI/GCodeViewer.cpp
index 49477ac7dd..c40d6dd222 100644
--- a/src/slic3r/GUI/GCodeViewer.cpp
+++ b/src/slic3r/GUI/GCodeViewer.cpp
@@ -17,6 +17,7 @@
 #include "Plater.hpp"
 #include "Camera.hpp"
 #include "I18N.hpp"
+#include "format.hpp"
 #include "GUI_Utils.hpp"
 #include "GUI.hpp"
 #include "GLCanvas3D.hpp"
@@ -3436,16 +3437,18 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
         return ret;
     };
 
+    // Whole sentences: the bare "up to"/"above"/"from"/"to" these used to be glued from gave a
+    // translator no context, and left the unit and the numbers stuck in English word order.
     auto upto_label = [](double z) {
         char buf[64];
         ::sprintf(buf, "%.2f", z);
-        return _u8L("up to") + " " + std::string(buf) + " " + _u8L("mm");
+        return format(_u8L("up to %1% mm"), buf);
     };
 
     auto above_label = [](double z) {
         char buf[64];
         ::sprintf(buf, "%.2f", z);
-        return _u8L("above") + " " + std::string(buf) + " " + _u8L("mm");
+        return format(_u8L("above %1% mm"), buf);
     };
 
     auto fromto_label = [](double z1, double z2) {
@@ -3453,7 +3456,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
         ::sprintf(buf1, "%.2f", z1);
         char buf2[64];
         ::sprintf(buf2, "%.2f", z2);
-        return _u8L("from") + " " + std::string(buf1) + " " + _u8L("to") + " " + std::string(buf2) + " " + _u8L("mm");
+        return format(_u8L("from %1% to %2% mm"), buf1, buf2);
     };
 
     auto role_time_and_percent = [this, total_estimated_time](libvgcode::EGCodeExtrusionRole role) {
diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp
index 9ab3c71938..ca22df3237 100644
--- a/src/slic3r/GUI/GLCanvas3D.cpp
+++ b/src/slic3r/GUI/GLCanvas3D.cpp
@@ -1081,56 +1081,36 @@ const double GLCanvas3D::DefaultCameraZoomToPlateMarginFactor = 1.25;
 
 void GLCanvas3D::load_arrange_settings()
 {
-    std::string dist_fff_str =
-        wxGetApp().app_config->get("arrange", "min_object_distance_fff");
+    // Each key must match what _render_arrange_menu writes, which appends a per-mode
+    // postfix to the base name.
+    auto load_float = [](const char *key, float &out) {
+        // The menu writes these with float_to_string_decimal_point, so parse them back
+        // the same way rather than with anything locale-dependent.
+        std::string value = wxGetApp().app_config->get("arrange", key);
+        size_t      parsed = 0;
+        double      number = string_to_double_decimal_point(value, &parsed);
+        if (parsed > 0)
+            out = float(number);
+    };
+    auto load_bool = [](const char *key, bool &out) {
+        std::string value = wxGetApp().app_config->get("arrange", key);
+        if (!value.empty())
+            out = (value == "1" || value == "true");
+    };
 
-    std::string dist_fff_seq_print_str =
-        wxGetApp().app_config->get("arrange", "min_object_distance_seq_print_fff");
+    load_float("min_object_distance_fff",           m_arrange_settings_fff.distance);
+    load_float("min_object_distance_fff_seq_print", m_arrange_settings_fff_seq_print.distance);
+    load_float("min_object_distance_sla",           m_arrange_settings_sla.distance);
 
-    std::string dist_sla_str =
-        wxGetApp().app_config->get("arrange", "min_object_distance_sla");
+    load_bool("enable_rotation_fff",           m_arrange_settings_fff.enable_rotation);
+    load_bool("enable_rotation_fff_seq_print", m_arrange_settings_fff_seq_print.enable_rotation);
+    load_bool("enable_rotation_sla",           m_arrange_settings_sla.enable_rotation);
 
-    std::string en_rot_fff_str =
-        wxGetApp().app_config->get("arrange", "enable_rotation_fff");
-
-    std::string en_rot_fff_seqp_str =
-        wxGetApp().app_config->get("arrange", "enable_rotation_seq_print");
-
-    std::string en_rot_sla_str =
-        wxGetApp().app_config->get("arrange", "enable_rotation_sla");
-
-    std::string en_allow_multiple_materials_str =
-        wxGetApp().app_config->get("arrange", "allow_multi_materials_on_same_plate");
-
-    std::string en_avoid_region_str =
-        wxGetApp().app_config->get("arrange", "avoid_extrusion_cali_region");
-
-
-
-    if (!dist_fff_str.empty())
-        m_arrange_settings_fff.distance = std::stof(dist_fff_str);
-
-    if (!dist_fff_seq_print_str.empty())
-        m_arrange_settings_fff_seq_print.distance = std::stof(dist_fff_seq_print_str);
-
-    if (!dist_sla_str.empty())
-        m_arrange_settings_sla.distance = std::stof(dist_sla_str);
-
-    if (!en_rot_fff_str.empty())
-        m_arrange_settings_fff.enable_rotation = (en_rot_fff_str == "1" || en_rot_fff_str == "true");
-
-    if (!en_allow_multiple_materials_str.empty())
-        m_arrange_settings_fff.allow_multi_materials_on_same_plate = (en_allow_multiple_materials_str == "1" || en_allow_multiple_materials_str == "true");
-
-
-    if (!en_rot_fff_seqp_str.empty())
-        m_arrange_settings_fff_seq_print.enable_rotation = (en_rot_fff_seqp_str == "1" || en_rot_fff_seqp_str == "true");
-
-    if(!en_avoid_region_str.empty())
-        m_arrange_settings_fff.avoid_extrusion_cali_region = (en_avoid_region_str == "1" || en_avoid_region_str == "true");
-
-    if (!en_rot_sla_str.empty())
-        m_arrange_settings_sla.enable_rotation = (en_rot_sla_str == "1" || en_rot_sla_str == "true");
+    // These two keys carry no postfix, so the one stored value covers both FFF modes.
+    load_bool("allow_multi_materials_on_same_plate", m_arrange_settings_fff.allow_multi_materials_on_same_plate);
+    load_bool("allow_multi_materials_on_same_plate", m_arrange_settings_fff_seq_print.allow_multi_materials_on_same_plate);
+    load_bool("avoid_extrusion_cali_region",         m_arrange_settings_fff.avoid_extrusion_cali_region);
+    load_bool("avoid_extrusion_cali_region",         m_arrange_settings_fff_seq_print.avoid_extrusion_cali_region);
 
     //BBS: add specific arrange settings
     m_arrange_settings_fff_seq_print.is_seq_print = true;
@@ -2141,12 +2121,6 @@ void GLCanvas3D::render(bool only_init)
     _render_selection_center();
 #endif // ENABLE_RENDER_SELECTION_CENTER
 
-    // we need to set the mouse's scene position here because the depth buffer
-    // could be invalidated by the following gizmo render methods
-    // this position is used later into on_mouse() to drag the objects
-    if (m_picking_enabled)
-        m_mouse.scene_position = _mouse_to_3d(m_mouse.position.cast<coord_t>());
-
     // sidebar hints need to be rendered before the gizmos because the depth buffer
     // could be invalidated by the following gizmo render methods
     _render_selection_sidebar_hints();
@@ -2221,7 +2195,7 @@ void GLCanvas3D::render(bool only_init)
 
 	// Negative coordinate means out of the window, likely because the window was deactivated.
 	// In that case the tooltip should be hidden.
-    if (m_mouse.position.x() >= 0. && m_mouse.position.y() >= 0. || has_mouse_capture()) { // ORCA continue to capture mouse pos mid drag
+    if ((m_mouse.position.x() >= 0. && m_mouse.position.y() >= 0.) || has_mouse_capture()) { // ORCA continue to capture mouse pos mid drag
         if (tooltip.empty())
             tooltip = m_layers_editing.get_tooltip(*this);
 
@@ -2921,23 +2895,37 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re
                 DynamicPrintConfig& proj_cfg = wxGetApp().preset_bundle->project_config;
                 float x = dynamic_cast<const ConfigOptionFloats*>(proj_cfg.option("wipe_tower_x"))->get_at(plate_id);
                 float y = dynamic_cast<const ConfigOptionFloats*>(proj_cfg.option("wipe_tower_y"))->get_at(plate_id);
-                float w = dynamic_cast<const ConfigOptionFloat*>(m_config->option("prime_tower_width"))->value;
                 float a = dynamic_cast<const ConfigOptionFloat*>(m_config->option("wipe_tower_rotation_angle"))->value;
-                // BBS
-                float v = dynamic_cast<const ConfigOptionFloat*>(m_config->option("prime_volume"))->value;
                 Vec3d plate_origin = ppl.get_plate(plate_id)->get_origin();
 
-                const Print* print = m_process->fff_print();
                 const Print* current_print = part_plate->fff_print();
-                if (!need_wipe_tower && part_plate->get_extruders(true).size() < 2) continue;
                 if (part_plate->get_objects_on_this_plate().empty()) continue;
 
-                float brim_width = print->wipe_tower_data(filaments_count).brim_width;
-                int nozzle_nums = wxGetApp().preset_bundle->get_printer_extruder_count();
-                Vec3d wipe_tower_size = ppl.get_plate(plate_id)->estimate_wipe_tower_size(full_config, w, v, nozzle_nums, 0, false, dynamic_cast<const ConfigOptionBool*>(dconfig.option("enable_wrapping_detection"))->value);
+                // Body and brim from this plate's own estimate: m_process->fff_print() is the
+                // selected plate's, so an auto brim drew every tower with that plate's brim.
+                const WipeTowerFootprint footprint = part_plate->estimate_wipe_tower_footprint(full_config);
+                // The estimate is also the answer to whether this plate prints a tower;
+                // deciding it here as well only gave the two room to drift.
+                if (footprint.depth <= 0.) continue;
+                float brim_width = float(footprint.brim_width);
+                Vec3d wipe_tower_size(footprint.width, footprint.depth, footprint.height);
+
+                // set_default_wipe_tower_pos_for_plate doesn't rerun when painting changes the
+                // filament count, so redo its clamp here on every reload — unconditionally: a
+                // paint-triggered reload can arrive before the background process invalidates
+                // psWipeTower, so gating on it would skip the clamp exactly when it is needed.
+                {
+                    Vec3d clamped_pos, clamped_size;
+                    part_plate->estimate_wipe_tower_polygon(full_config, plate_id, clamped_pos, clamped_size);
+                    if (std::abs(x - (float) clamped_pos(0)) > EPSILON || std::abs(y - (float) clamped_pos(1)) > EPSILON) {
+                        x = (float) clamped_pos(0);
+                        y = (float) clamped_pos(1);
+                        ConfigOptionFloat wt_x_opt(x), wt_y_opt(y);
+                        dynamic_cast<ConfigOptionFloats*>(proj_cfg.option("wipe_tower_x"))->set_at(&wt_x_opt, plate_id, 0);
+                        dynamic_cast<ConfigOptionFloats*>(proj_cfg.option("wipe_tower_y"))->set_at(&wt_y_opt, plate_id, 0);
+                    }
+                }
 
-                // The stored position is already clamped onto the bed, by
-                // set_default_wipe_tower_pos_for_plate and again on every drag.
                 if (!current_print->is_step_done(psWipeTower) || !current_print->wipe_tower_data().wipe_tower_mesh_data) {
                     // update for wipe tower position
                     int volume_idx_wipe_tower_new = m_volumes.load_wipe_tower_preview(1000 + plate_id, x + plate_origin(0), y + plate_origin(1),
@@ -4451,6 +4439,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
                 if (can_sequential_clearance_show_in_gizmo())
                     update_sequential_clearance();
             } else {
+                // Orca: by-layer counterpart, for a prime tower compacted by "No sparse layers".
+                if (current_printer_technology() == ptFFF && can_sequential_clearance_show_in_gizmo())
+                    update_compacted_wipe_tower_clearance();
                 if (c == GLGizmosManager::EType::Move ||
                     c == GLGizmosManager::EType::Scale ||
                     c == GLGizmosManager::EType::Rotate)
@@ -4620,12 +4611,13 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
                         BoundingBoxf3 volume_bbox = m_volumes.volumes[volume_idx]->transformed_bounding_box();
                         volume_bbox.offset(1.0);
                         const bool is_cut_connector_selected = m_selection.is_any_connector();
-                        if ((!any_gizmo_active || !evt.CmdDown()) && volume_bbox.contains(m_mouse.scene_position) && !is_cut_connector_selected) {
+                        const Vec3d scene_position = _mouse_to_3d(pos);
+                        if ((!any_gizmo_active || !evt.CmdDown()) && volume_bbox.contains(scene_position) && !is_cut_connector_selected) {
                             m_volumes.volumes[volume_idx]->hover = GLVolume::HS_None;
                             // The dragging operation is initiated.
                             m_mouse.drag.move_volume_idx = volume_idx;
                             m_selection.setup_cache();
-                            m_mouse.drag.start_position_3D = m_mouse.scene_position;
+                            m_mouse.drag.start_position_3D = scene_position;
                             m_sequential_print_clearance_first_displacement = true;
                             m_moving = true;
 
@@ -4683,8 +4675,12 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
                 TransformationType trafo_type;
                 trafo_type.set_relative();
                 m_selection.translate(cur_pos - m_mouse.drag.start_position_3D, trafo_type);
-                if (current_printer_technology() == ptFFF && (fff_print()->config().print_sequence == PrintSequence::ByObject))
-                    update_sequential_clearance();
+                if (current_printer_technology() == ptFFF) {
+                    if (fff_print()->config().print_sequence == PrintSequence::ByObject)
+                        update_sequential_clearance();
+                    else
+                        update_compacted_wipe_tower_clearance();
+                }
                 // BBS
                 //wxGetApp().obj_manipul()->set_dirty();
                 m_dirty = true;
@@ -5172,7 +5168,21 @@ void GLCanvas3D::do_move(const std::string& snapshot_type)
     }
 
     //BBS: notify instance updates to part plater list
-    m_selection.notify_instance_update(-1, 0);
+    // Only what moved: the selected instances, or every instance of an object one of whose
+    // parts moved. Notifying a plate about an instance that stayed put invalidates its slice
+    // result, and notifying instance 0 alone left a moved copy unregistered on its new plate.
+    {
+        std::set<std::pair<int, int>> notified;
+        for (unsigned int i : m_selection.get_volume_idxs()) {
+            const GLVolume* v          = m_volumes.volumes[i];
+            const int       object_idx = v->object_idx();
+            if (object_idx < 0 || object_idx >= static_cast<int>(m_model->objects.size()))
+                continue;
+            const std::pair<int, int> key(object_idx, selection_mode == Selection::Volume ? -1 : v->instance_idx());
+            if (notified.insert(key).second)
+                m_selection.notify_instance_update(key.first, key.second);
+        }
+    }
 
     // Fixes sinking/flying instances (snaps object to buildplate)
     for (const std::pair<int, int>& i : done) {
@@ -5738,6 +5748,101 @@ bool GLCanvas3D::can_sequential_clearance_show_in_gizmo() {
     return false;
 }
 
+// Live preview of the compacted prime tower clearance, the by-layer counterpart of
+// update_sequential_clearance(). Called while the user drags a volume / gizmo; idle visibility
+// matches sequential print (hidden when valid, filled when Print::validate reports a collision).
+// Print::compacted_wipe_tower_clearance_valid() answers the same question authoritatively, but it
+// reads the tower position from the config, which only catches up once do_move() writes it back on
+// mouse release. Recomputing from the volumes here is what makes the keep-out zone follow the tower
+// while it is still under the cursor.
+void GLCanvas3D::update_compacted_wipe_tower_clearance()
+{
+    if (current_printer_technology() != ptFFF)
+        return;
+    const Print *print = fff_print();
+    if (print == nullptr)
+        return;
+    const PrintConfig &config = print->config();
+    if (config.print_sequence != PrintSequence::ByLayer || ! wipe_tower_sparse_layers_skipped(config) || ! print->has_wipe_tower())
+        return;
+
+    PartPlateList &plate_list = wxGetApp().plater()->get_partplate_list();
+    PartPlate     *plate      = plate_list.get_curr_plate();
+    if (plate == nullptr)
+        return;
+    const int plate_id = plate_list.get_curr_plate_index();
+
+    // Once the tower has been generated the scene shows its real mesh with the brim merged in,
+    // otherwise it is a bare estimated cube with no brim at all. Only the latter needs the brim added
+    // here, and the width comes from WipeTowerData, the same source the preview box is sized from, so
+    // the zone cannot be padded against a brim the preview was not built with.
+    const bool   preview_carries_brim = print->is_step_done(psWipeTower) && print->wipe_tower_data().wipe_tower_mesh_data.has_value();
+    const double brim                 = preview_carries_brim ? 0. : double(print->wipe_tower_data(print->extruders().size()).brim_width);
+    const double padding              = compacted_tower_footprint_padding(config, brim);
+
+    // Tower footprint straight from the volume the user sees, so that dragging either the tower or an
+    // object updates the zone on the very next frame.
+    Polygon tower_footprint;
+    for (const GLVolume *v : m_volumes.volumes) {
+        if (! v->is_wipe_tower || v->object_idx() - 1000 != plate_id)
+            continue;
+        const BoundingBoxf3 bbox = v->transformed_convex_hull_bounding_box();
+        tower_footprint = Polygon({ Point(scale_(bbox.min.x() - padding), scale_(bbox.min.y() - padding)),
+                                    Point(scale_(bbox.max.x() + padding), scale_(bbox.min.y() - padding)),
+                                    Point(scale_(bbox.max.x() + padding), scale_(bbox.max.y() + padding)),
+                                    Point(scale_(bbox.min.x() - padding), scale_(bbox.max.y() + padding)) });
+        break;
+    }
+
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(config, tower_footprint);
+    if (zone.empty()) {
+        reset_sequential_print_clearance();
+        return;
+    }
+
+    // While dragging, outline every on-plate instance next to the tower ring, the way sequential print
+    // outlines every object. Both carry half of the clearance, so the two outlines meeting is precisely
+    // the moment that object goes over its limit - which is what makes the pair worth drawing at all.
+    // The tier is per object, so a short object gets the narrow nozzle outline rather than the wide
+    // body one it is not subject to; without that, a 3 mm object parked beside the tower would be drawn
+    // deep inside the keep-out ring while passing the check. Only the instances that already exceed
+    // allowed_rise also get a height limit plane.
+    Polygons                               outlines;
+    std::vector<std::pair<Polygon, float>> height_polygons;
+    bool                                   body_tier_used = false;
+    const BoundingBox                      plate_bb       = plate->get_bounding_box_crd();
+    for (const ModelObject *model_object : m_model->objects) {
+        for (size_t i = 0; i < model_object->instances.size(); ++i) {
+            Geometry::Transformation trafo(model_object->instances[i]->get_transformation());
+            const Vec3d              offset = trafo.get_offset();
+            trafo.set_offset(Vec3d(offset.x(), offset.y(), 0.0));
+            const Polygon inst_hull = model_object->convex_hull_2d(trafo.get_matrix());
+            if (inst_hull.points.empty() || ! plate_bb.overlap(inst_hull.bounding_box()))
+                continue;
+
+            // Same tiers and the same rise measured from the plate as
+            // Print::compacted_wipe_tower_clearance_valid(), so that the preview and the validation
+            // that follows it never contradict each other.
+            const double                  object_top = model_object->get_instance_max_z(i);
+            const CompactedTowerClearance clearance  = compacted_wipe_tower_clearance(config, zone, inst_hull, object_top);
+            body_tier_used                           = body_tier_used || compacted_tower_body_tier(clearance);
+
+            const Polygon outline = compacted_wipe_tower_offender_outline(inst_hull, clearance.body_clearance);
+            outlines.emplace_back(outline);
+            if (object_top <= clearance.allowed_rise + EPSILON)
+                continue;
+            height_polygons.emplace_back(outline, float(clearance.allowed_rise));
+        }
+    }
+
+    Polygons polygons = compacted_wipe_tower_rings(zone, body_tier_used);
+    append(polygons, outlines);
+
+    set_sequential_print_clearance_visible(true);
+    set_sequential_print_clearance_render_fill(false);
+    set_sequential_print_clearance_polygons(polygons, height_polygons);
+}
+
 void GLCanvas3D::update_sequential_clearance()
 {
     if (current_printer_technology() != ptFFF || (fff_print()->config().print_sequence == PrintSequence::ByLayer))
@@ -6058,7 +6163,7 @@ bool GLCanvas3D::_render_orient_menu(float left, float right, float bottom, floa
 }
 
 //BBS: GUI refactor: adjust main toolbar position
-bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, float top)
+void GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, float top)
 {
     ImGuiWrapper *imgui = wxGetApp().imgui();
 
@@ -6083,7 +6188,6 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
 
     imgui->begin(_L("Arrange options"), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_AlwaysAutoResize | ImGuiWindowFlags_NoCollapse | ImGuiWindowFlags_NoTitleBar);
 
-    ArrangeSettings settings = get_arrange_settings();
     ArrangeSettings &settings_out = get_arrange_settings();
     const float slider_icon_width = imgui->get_slider_icon_size().x;
     const float cursor_slider_left = imgui->calc_text_size(_L("Spacing")).x + imgui->scaled(1.5f);
@@ -6092,13 +6196,9 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
     auto &appcfg = wxGetApp().app_config;
     PrinterTechnology ptech = current_printer_technology();
 
-    bool settings_changed = false;
-    float dist_min = 0.f;  // 0 means auto
     std::string dist_key = "min_object_distance", rot_key = "enable_rotation";
-    std::string bed_shrink_x_key = "bed_shrink_x", bed_shrink_y_key = "bed_shrink_y";
     std::string multi_material_key = "allow_multi_materials_on_same_plate";
     std::string avoid_extrusion_key = "avoid_extrusion_cali_region";
-    std::string align_to_y_axis_key = "align_to_y_axis";
     std::string postfix;
     //BBS:
     bool seq_print = false;
@@ -6106,59 +6206,41 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
     if (ptech == ptSLA) {
         postfix      = "_sla";
     } else if (ptech == ptFFF) {
-        seq_print = &settings == &m_arrange_settings_fff_seq_print;
-        if (seq_print) {
-            postfix      = "_fff_seq_print";
-        } else {
-            postfix     = "_fff";
-        }
+        seq_print    = wxGetApp().global_print_sequence() == PrintSequence::ByObject;
+        postfix      = seq_print ? "_fff_seq_print" : "_fff";
     }
 
     dist_key += postfix;
     rot_key  += postfix;
-    bed_shrink_x_key += postfix;
-    bed_shrink_y_key += postfix;
 
     ImGui::AlignTextToFramePadding();
     imgui->text(_L("Spacing"));
     ImGui::SameLine(1.2 * cursor_slider_left);
     ImGui::PushItemWidth(window_width - slider_icon_width);
-    bool b_Spacing = imgui->bbl_slider_float_style("##Spacing", &settings.distance, dist_min, 100.0f, "%5.2f") || dist_min > settings.distance;
+    bool b_Spacing = imgui->bbl_slider_float_style("##Spacing", &settings_out.distance, 0.f, 100.0f, "%5.2f", 1.0f, /*clamp=*/false);
     ImGui::SameLine(window_width - slider_icon_width + 1.3 * cursor_slider_left);
     ImGui::PushItemWidth(1.5 * slider_icon_width);
-    bool b_spacing_input = ImGui::BBLDragFloat("##spacing_input", &settings.distance, 0.05f, 0.0f, 0.0f, "%.2f");
-    if (b_Spacing || b_spacing_input)
-    {
-        settings.distance = std::max(dist_min, settings.distance);
-        settings_out.distance = settings.distance;
+    bool b_spacing_input = ImGui::BBLDragFloat("##spacing_input", &settings_out.distance, 0.05f, 0.0f, 0.0f, "%.2f");
+    if (b_Spacing || b_spacing_input) {
+        settings_out.distance = std::max(0.f, settings_out.distance);
         appcfg->set("arrange", dist_key.c_str(), float_to_string_decimal_point(settings_out.distance));
-        settings_changed = true;
     }
     imgui->text(_L("0 means auto spacing."));
 
     ImGui::Separator();
-    if (imgui->bbl_checkbox(_L("Auto rotate for arrangement"), settings.enable_rotation)) {
-        settings_out.enable_rotation = settings.enable_rotation;
+    if (imgui->bbl_checkbox(_L("Auto rotate for arrangement"), settings_out.enable_rotation))
         appcfg->set("arrange", rot_key.c_str(), settings_out.enable_rotation);
-        settings_changed = true;
-    }
 
-    if (imgui->bbl_checkbox(_L("Allow multiple materials on same plate"), settings.allow_multi_materials_on_same_plate)) {
-        settings_out.allow_multi_materials_on_same_plate = settings.allow_multi_materials_on_same_plate;
-        appcfg->set("arrange", multi_material_key.c_str(), settings_out.allow_multi_materials_on_same_plate );
-        settings_changed = true;
-    }
+    if (imgui->bbl_checkbox(_L("Allow multiple materials on same plate"), settings_out.allow_multi_materials_on_same_plate))
+        appcfg->set("arrange", multi_material_key.c_str(), settings_out.allow_multi_materials_on_same_plate);
 
     // only show this option if the printer has micro Lidar and can do first layer scan
     DynamicPrintConfig &current_config = wxGetApp().preset_bundle->printers.get_edited_preset().config;
     const bool has_lidar = wxGetApp().preset_bundle->is_bbl_vendor();
     auto                op             = current_config.option("scan_first_layer");
     if (has_lidar && op && op->getBool()) {
-        if (imgui->bbl_checkbox(_L("Avoid extrusion calibration region"), settings.avoid_extrusion_cali_region)) {
-            settings_out.avoid_extrusion_cali_region = settings.avoid_extrusion_cali_region;
-            appcfg->set("arrange", avoid_extrusion_key.c_str(), settings_out.avoid_extrusion_cali_region ? "1" : "0");
-            settings_changed = true;
-        }
+        if (imgui->bbl_checkbox(_L("Avoid extrusion calibration region"), settings_out.avoid_extrusion_cali_region))
+            appcfg->set("arrange", avoid_extrusion_key.c_str(), settings_out.avoid_extrusion_cali_region);
     } else {
         settings_out.avoid_extrusion_cali_region = false;
     }
@@ -6170,11 +6252,7 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
             settings_out.align_to_y_axis = false;
         }
 
-        if (imgui->bbl_checkbox(_L("Align to Y axis"), settings.align_to_y_axis)) {
-            settings_out.align_to_y_axis = settings.align_to_y_axis;
-            appcfg->set("arrange", align_to_y_axis_key, settings_out.align_to_y_axis ? "1" : "0");
-            settings_changed = true;
-        }
+        imgui->bbl_checkbox(_L("Align to Y axis"), settings_out.align_to_y_axis);
 
         if (settings_out.enable_rotation == true) { imgui->disabled_end(); }
     }
@@ -6190,7 +6268,6 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
 
     if (imgui->button(_L("Reset"))) {
         settings_out = ArrangeSettings{};
-        settings_out.distance = std::max(dist_min, settings_out.distance);
         //BBS: add specific arrange settings
         if (seq_print) settings_out.is_seq_print = true;
 
@@ -6200,18 +6277,16 @@ bool GLCanvas3D::_render_arrange_menu(float left, float right, float bottom, flo
         else
             settings_out.align_to_y_axis = false;
 
-        appcfg->set("arrange", dist_key, float_to_string_decimal_point(settings_out.distance));
-        appcfg->set("arrange", rot_key, settings_out.enable_rotation ? "1" : "0");
-        appcfg->set("arrange", align_to_y_axis_key, settings_out.align_to_y_axis ? "1" : "0");
-        settings_changed = true;
+        appcfg->erase("arrange", dist_key);
+        appcfg->erase("arrange", rot_key);
+        appcfg->erase("arrange", multi_material_key);
+        appcfg->erase("arrange", avoid_extrusion_key);
     }
     ImGui::PopStyleVar(1);
     imgui->end();
 
     //BBS
     ImGuiWrapper::pop_toolbar_style();
-
-    return settings_changed;
 }
 
 static const float cameraProjection[16] = {1.f, 0.f, 0.f, 0.f, 0.f, 1.f, 0.f, 0.f, 0.f, 0.f, 1.f, 0.f, 0.f, 0.f, 0.f, 1.f};
@@ -9996,18 +10071,18 @@ void GLCanvas3D::_render_paint_toolbar() const
         ImVec2 number_label_size = ImGui::CalcTextSize(std::to_string(i + 1).c_str());
         ImGui::SetCursorPosY(cursor_y + text_offset_y);
         ImGui::SetCursorPosX(spacing + i * (spacing + button_size.x) + (button_size.x - number_label_size.x) / 2);
-        ImGui::TextColored(text_color, std::to_string(i + 1).c_str());
+        ImGui::TextColored(text_color, "%s", std::to_string(i + 1).c_str());
         imgui.pop_bold_font();
 
         ImVec2 filament_first_line_label_size = ImGui::CalcTextSize(filament_text_first_line[i].c_str());
         ImGui::SetCursorPosY(cursor_y + text_offset_y + number_label_size.y);
         ImGui::SetCursorPosX(spacing + i * (spacing + button_size.x) + (button_size.x - filament_first_line_label_size.x) / 2);
-        ImGui::TextColored(text_color, filament_text_first_line[i].c_str());
+        ImGui::TextColored(text_color, "%s", filament_text_first_line[i].c_str());
 
         ImVec2 filament_second_line_label_size = ImGui::CalcTextSize(filament_text_second_line[i].c_str());
         ImGui::SetCursorPosY(cursor_y + text_offset_y + number_label_size.y + filament_first_line_label_size.y);
         ImGui::SetCursorPosX(spacing + i * (spacing + button_size.x) + (button_size.x - filament_second_line_label_size.x) / 2);
-        ImGui::TextColored(text_color, filament_text_second_line[i].c_str());
+        ImGui::TextColored(text_color, "%s", filament_text_second_line[i].c_str());
     }
 
     if (ImGui::GetWindowWidth() == constraint_window_width) {
@@ -10234,9 +10309,9 @@ void GLCanvas3D::_render_assemble_info() const
     double size1 = m_selection.get_bounding_box().size()(1);
     double size2 = m_selection.get_bounding_box().size()(2);
     if (!m_selection.is_empty()) {
-        ImGui::Text(_L("Volume:").ToUTF8()); ImGui::SameLine(caption_max);
+        ImGui::Text("%s", _L("Volume:").ToUTF8().data()); ImGui::SameLine(caption_max);
         ImGui::Text("%.2f", size0 * size1 * size2);
-        ImGui::Text(_L("Size:").ToUTF8()); ImGui::SameLine(caption_max);
+        ImGui::Text("%s", _L("Size:").ToUTF8().data()); ImGui::SameLine(caption_max);
         ImGui::Text("%.2f x %.2f x %.2f", size0, size1, size2);
     }
     imgui->end();
diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp
index 6440632aee..7c18fa3f64 100644
--- a/src/slic3r/GUI/GLCanvas3D.hpp
+++ b/src/slic3r/GUI/GLCanvas3D.hpp
@@ -340,7 +340,6 @@ class GLCanvas3D
 
         bool dragging{ false };
         Vec2d position{ DBL_MAX, DBL_MAX };
-        Vec3d scene_position{ DBL_MAX, DBL_MAX, DBL_MAX };
         bool ignore_left_up{ false };
         Drag drag;
         bool ignore_right_up;
@@ -684,11 +683,7 @@ public:
     }
 
     void load_arrange_settings();
-    ArrangeSettings& get_arrange_settings();// { return get_arrange_settings(this); }
-    ArrangeSettings& get_arrange_settings(PrintSequence print_seq) {
-        return (print_seq == PrintSequence::ByObject) ? m_arrange_settings_fff_seq_print
-            : m_arrange_settings_fff;
-    }
+    ArrangeSettings& get_arrange_settings();
 
     class SequentialPrintClearance
     {
@@ -1201,17 +1196,6 @@ public:
     void highlight_toolbar_item(const std::string& item_name);
     void highlight_gizmo(const std::string& gizmo_name);
 
-    ArrangeSettings get_arrange_settings() const {
-        const ArrangeSettings &settings = get_arrange_settings();
-        ArrangeSettings ret = settings;
-        if (&settings == &m_arrange_settings_fff_seq_print) {
-            ret.distance = std::max(ret.distance,
-                                    float(min_object_distance(*m_config)));
-        }
-
-        return ret;
-    }
-
     // Timestamp for FPS calculation and notification fade-outs.
     static int64_t timestamp_now() {
 #ifdef _WIN32
@@ -1245,6 +1229,8 @@ public:
 
     bool can_sequential_clearance_show_in_gizmo();
     void update_sequential_clearance();
+    // Orca: by-layer counterpart, for a prime tower compacted by "No sparse layers".
+    void update_compacted_wipe_tower_clearance();
 
     const Print* fff_print() const;
     const SLAPrint* sla_print() const;
@@ -1350,7 +1336,7 @@ private:
     void _render_selection_sidebar_hints() { m_selection.render_sidebar_hints(m_sidebar_field, m_gizmos.get_uniform_scaling()); }
     //BBS: GUI refactor: adjust main toolbar position
     bool _render_orient_menu(float left, float right, float bottom, float top);
-    bool _render_arrange_menu(float left, float right, float bottom, float top);
+    void _render_arrange_menu(float left, float right, float bottom, float top);
     void _render_3d_navigator();
 
     void _update_volumes_hover_state();
diff --git a/src/slic3r/GUI/GLTexture.cpp b/src/slic3r/GUI/GLTexture.cpp
index d670181b1b..fbdb308c56 100644
--- a/src/slic3r/GUI/GLTexture.cpp
+++ b/src/slic3r/GUI/GLTexture.cpp
@@ -9,6 +9,7 @@
 #include "3DScene.hpp"
 #include "OpenGLManager.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
 #include "GLModel.hpp"
 
 #include <glad/gl.h>
@@ -31,6 +32,7 @@
 #include "GUI_App.hpp"
 #include <boost/log/trivial.hpp>
 #include <wx/dcgraph.h>
+#include <wx/dcmemory.h>
 namespace Slic3r {
 namespace GUI {
 
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index 3500493329..966cf49013 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -3,6 +3,14 @@
 #include "libslic3r/Technologies.hpp"
 #include "libslic3r/Platform.hpp"
 #include "GUI_App.hpp"
+#include "BindDialog.hpp"
+#include "DeviceManager.hpp"
+#include "HMS.hpp"
+#include "PresetBundleDialog.hpp"
+#include "WebUserLoginDialog.hpp"
+#include "WebViewDialog.hpp"
+#include "slic3r/Utils/BBLCloudServiceAgent.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "GUI_Init.hpp"
 #include "GUI_ObjectList.hpp"
 #include "slic3r/GUI/UserManager.hpp"
@@ -598,7 +606,7 @@ wxString file_wildcards(FileType file_type, const std::string &custom_extension)
 static std::string libslic3r_translate_callback(const char *s) { return wxGetTranslation(wxString(s, wxConvUTF8)).utf8_str().data(); }
 
 #ifdef WIN32
-static GUID GUID_DEVINTERFACE_HID = { 0x4D1E55B2, 0xF16F, 0x11CF, 0x88, 0xCB, 0x00, 0x11, 0x11, 0x00, 0x00, 0x30 };
+static GUID GUID_DEVINTERFACE_HID = { 0x4D1E55B2, 0xF16F, 0x11CF, { 0x88, 0xCB, 0x00, 0x11, 0x11, 0x00, 0x00, 0x30 } };
 
 static void register_win32_device_notification_event()
 {
@@ -6808,7 +6816,7 @@ bool GUI_App::check_preset_parent_available(const std::pair<std::string, std::ma
 
 void GUI_App::add_pending_vendor_preset(const std::pair<std::string, std::map<std::string, std::string>>& preset_data)
 {
-    Preset::Type type;
+    Preset::Type type = Preset::Type::TYPE_INVALID;
     if (preset_data.second.at(BBL_JSON_KEY_TYPE) == PRESET_IOT_PRINT_TYPE)
         type = Preset::Type::TYPE_PRINT;
     else if (preset_data.second.at(BBL_JSON_KEY_TYPE) == PRESET_IOT_PRINTER_TYPE)
@@ -7769,21 +7777,6 @@ void GUI_App::stop_http_server()
     m_http_server.stop();
 }
 
-void GUI_App::switch_staff_pick(bool on)
-{
-    mainframe->m_webview->SendDesignStaffpick(on);
-}
-
-bool GUI_App::switch_language()
-{
-    if (select_language()) {
-        recreate_GUI(_L("Switching application language") + dots);
-        return true;
-    } else {
-        return false;
-    }
-}
-
 #ifdef __linux__
 static const wxLanguageInfo* linux_get_existing_locale_language(const wxLanguageInfo* language,
                                                                 const wxLanguageInfo* system_language)
@@ -7878,72 +7871,6 @@ int GUI_App::GetSingleChoiceIndex(const wxString& message,
 #endif
 }
 
-// select language from the list of installed languages
-bool GUI_App::select_language()
-{
-	wxArrayString translations = wxTranslations::Get()->GetAvailableTranslations(SLIC3R_APP_KEY);
-    std::vector<const wxLanguageInfo*> language_infos;
-    language_infos.emplace_back(wxLocale::GetLanguageInfo(wxLANGUAGE_ENGLISH));
-    for (size_t i = 0; i < translations.GetCount(); ++ i) {
-	    const wxLanguageInfo *langinfo = wxLocale::FindLanguageInfo(translations[i]);
-        if (langinfo != nullptr)
-            language_infos.emplace_back(langinfo);
-    }
-    sort_remove_duplicates(language_infos);
-	std::sort(language_infos.begin(), language_infos.end(), [](const wxLanguageInfo* l, const wxLanguageInfo* r) { return l->Description < r->Description; });
-
-    wxArrayString names;
-    names.Alloc(language_infos.size());
-
-    // Some valid language should be selected since the application start up.
-    const wxString active_language_code = current_language_code();
-    const wxLanguageInfo* active_language_info = wxLocale::FindLanguageInfo(active_language_code);
-    const wxLanguage current_language = active_language_info != nullptr ? wxLanguage(active_language_info->Language) : wxLanguage(m_wxLocale->GetLanguage());
-    const wxString active_lang_prefix = active_language_code.BeforeFirst('_');
-    int 		     init_selection   		= -1;
-    int 			 init_selection_alt     = -1;
-    int 			 init_selection_default = -1;
-    for (size_t i = 0; i < language_infos.size(); ++ i) {
-        if (wxLanguage(language_infos[i]->Language) == current_language)
-        	// The dictionary matches the active language and country.
-            init_selection = i;
-        else if ((language_infos[i]->CanonicalName.BeforeFirst('_') == active_lang_prefix) ||
-        		 // if the active language is Slovak, mark the Czech language as active.
-        	     (language_infos[i]->CanonicalName.BeforeFirst('_') == "cs" && active_lang_prefix == "sk"))
-        	// The dictionary matches the active language, it does not necessarily match the country.
-        	init_selection_alt = i;
-        if (language_infos[i]->CanonicalName.BeforeFirst('_') == "en")
-        	// This will be the default selection if the active language does not match any dictionary.
-        	init_selection_default = i;
-        names.Add(language_infos[i]->Description);
-    }
-    if (init_selection == -1)
-    	// This is the dictionary matching the active language.
-    	init_selection = init_selection_alt;
-    if (init_selection != -1)
-    	// This is the language to highlight in the choice dialog initially.
-    	init_selection_default = init_selection;
-
-    const long index = GetSingleChoiceIndex(_L("Select the language"), _L("Language"), names, init_selection_default);
-	// Try to load a new language.
-    if (index != -1 && (init_selection == -1 || init_selection != index)) {
-    	const wxLanguageInfo *new_language_info = language_infos[index];
-    	if (this->load_language(new_language_info->CanonicalName, false)) {
-			// Save language at application config.
-            // Which language to save as the selected dictionary language?
-            // 1) Hopefully the language set to wxTranslations by this->load_language(), but that API is weird and we don't want to rely on its
-            //    stability in the future:
-            //    wxTranslations::Get()->GetBestTranslation(SLIC3R_APP_KEY, wxLANGUAGE_ENGLISH);
-            // 2) Current locale language may not match the dictionary name, see GH issue #3901
-            //    m_wxLocale->GetCanonicalName()
-            // 3) new_language_info->CanonicalName is a safe bet. It points to a valid dictionary name.
-			app_config->set("language", new_language_info->CanonicalName.ToUTF8().data());
-    		return true;
-        }
-    }
-
-    return false;
-}
 
 // Load gettext translation files and activate them at the start of the application,
 // based on the "language" key stored in the application config.
@@ -8330,146 +8257,6 @@ void  GUI_App::show_ip_address_enter_dialog_handler(wxCommandEvent& evt)
     show_modal_ip_address_enter_dialog(mode == -1?false:true, title);
 }
 
-//void GUI_App::add_config_menu(wxMenuBar *menu)
-//void GUI_App::add_config_menu(wxMenu *menu)
-//{
-//    auto local_menu = new wxMenu();
-//    wxWindowID config_id_base = wxWindow::NewControlId(int(ConfigMenuCnt));
-//
-//    const auto config_wizard_name = _(ConfigWizard::name(true));
-//    const auto config_wizard_tooltip = from_u8((boost::format(_utf8(L("Open %s"))) % config_wizard_name).str());
-//    // Cmd+, is standard on OS X - what about other operating systems?
-//    if (is_editor()) {
-//        local_menu->Append(config_id_base + ConfigMenuWizard, config_wizard_name + dots, config_wizard_tooltip);
-//        local_menu->Append(config_id_base + ConfigMenuUpdate, _L("Check for Configuration Updates"), _L("Check for configuration updates"));
-//        local_menu->AppendSeparator();
-//    }
-//    local_menu->Append(config_id_base + ConfigMenuPreferences, _L("Preferences") + dots +
-//#ifdef __APPLE__
-//        "\tCtrl+,",
-//#else
-//        "\tCtrl+P",
-//#endif
-//        _L("Application preferences"));
-//    wxMenu* mode_menu = nullptr;
-//    if (is_editor()) {
-//        local_menu->AppendSeparator();
-//        mode_menu = new wxMenu();
-//        mode_menu->AppendRadioItem(config_id_base + ConfigMenuModeSimple, _L("Simple"), _L("Simple Mode"));
-//        mode_menu->AppendRadioItem(config_id_base + ConfigMenuModeAdvanced, _L("Advanced"), _L("Advanced Mode"));
-//        Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { if (get_mode() == comSimple) evt.Check(true); }, config_id_base + ConfigMenuModeSimple);
-//        Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { if (get_mode() == comAdvanced) evt.Check(true); }, config_id_base + ConfigMenuModeAdvanced);
-//
-//        local_menu->AppendSubMenu(mode_menu, _L("Mode"), wxString::Format(_L("%s Mode"), SLIC3R_APP_NAME));
-//    }
-//    local_menu->AppendSeparator();
-//    local_menu->Append(config_id_base + ConfigMenuLanguage, _L("Language"));
-//    if (is_editor()) {
-//        local_menu->AppendSeparator();
-//    }
-//
-//    local_menu->Bind(wxEVT_MENU, [this, config_id_base](wxEvent &event) {
-//        switch (event.GetId() - config_id_base) {
-//        case ConfigMenuWizard:
-//            run_wizard(ConfigWizard::RR_USER);
-//            break;
-//		case ConfigMenuUpdate:
-//			check_updates(true);
-//			break;
-//#ifdef __linux__
-//        case ConfigMenuDesktopIntegration:
-//            show_desktop_integration_dialog();
-//            break;
-//#endif
-//        case ConfigMenuSnapshots:
-//            //BBS do not support task snapshot
-//            break;
-//        case ConfigMenuPreferences:
-//        {
-//            //BBS GUI refactor: remove unuse layout logic
-//            //bool app_layout_changed = false;
-//            {
-//                // the dialog needs to be destroyed before the call to recreate_GUI()
-//                // or sometimes the application crashes into wxDialogBase() destructor
-//                // so we put it into an inner scope
-//                PreferencesDialog dlg(mainframe);
-//                dlg.ShowModal();
-//                //BBS GUI refactor: remove unuse layout logic
-//                //app_layout_changed = dlg.settings_layout_changed();
-//                if (dlg.seq_top_layer_only_changed())
-//                    this->plater_->refresh_print();
-//
-//                if (dlg.recreate_GUI()) {
-//                    recreate_GUI(_L("Restart application") + dots);
-//                    return;
-//                }
-//#ifdef _WIN32
-//                if (is_editor()) {
-//                    if (app_config->get("associate_3mf") == "true")
-//                        associate_3mf_files();
-//                    if (app_config->get("associate_stl") == "true")
-//                        associate_stl_files();
-//                }
-//                else {
-//                    if (app_config->get("associate_gcode") == "true")
-//                        associate_gcode_files();
-//                }
-//#endif // _WIN32
-//            }
-//            //BBS GUI refactor: remove unuse layout logic
-//            /*if (app_layout_changed) {
-//                // hide full main_sizer for mainFrame
-//                mainframe->GetSizer()->Show(false);
-//                mainframe->update_layout();
-//                mainframe->select_tab(size_t(0));
-//            }*/
-//            break;
-//        }
-//        case ConfigMenuLanguage:
-//        {
-//            /* Before change application language, let's check unsaved changes on 3D-Scene
-//             * and draw user's attention to the application restarting after a language change
-//             */
-//            {
-//                // the dialog needs to be destroyed before the call to switch_language()
-//                // or sometimes the application crashes into wxDialogBase() destructor
-//                // so we put it into an inner scope
-//                wxString title = is_editor() ? wxString(SLIC3R_APP_NAME) : wxString(GCODEVIEWER_APP_NAME);
-//                title += " - " + _L("Choose language");
-//                //wxMessageDialog dialog(nullptr,
-//                MessageDialog dialog(nullptr,
-//                    _L("Switching the language requires application restart.\n") + "\n\n" +
-//                    _L("Do you want to continue?"),
-//                    title,
-//                    wxICON_QUESTION | wxOK | wxCANCEL);
-//                if (dialog.ShowModal() == wxID_CANCEL)
-//                    return;
-//            }
-//
-//            switch_language();
-//            break;
-//        }
-//        case ConfigMenuFlashFirmware:
-//            //BBS FirmwareDialog::run(mainframe);
-//            break;
-//        default:
-//            break;
-//        }
-//    });
-//
-//    using std::placeholders::_1;
-//
-//    if (mode_menu != nullptr) {
-//        auto modfn = [this](int mode, wxCommandEvent&) { if (get_mode() != mode) save_mode(mode); };
-//        mode_menu->Bind(wxEVT_MENU, std::bind(modfn, comSimple, _1), config_id_base + ConfigMenuModeSimple);
-//        mode_menu->Bind(wxEVT_MENU, std::bind(modfn, comAdvanced, _1), config_id_base + ConfigMenuModeAdvanced);
-//    }
-//
-//    // BBS
-//    //menu->Append(local_menu, _L("Configuration"));
-//    menu->AppendSubMenu(local_menu, _L("Configuration"));
-//}
-
 void GUI_App::open_presetbundledialog(size_t open_on_tab, const std::string& highlight_option)
 {
     bool app_layout_changed = false;
@@ -9418,7 +9205,7 @@ int GUI_App::filaments_cnt() const
 PrintSequence GUI_App::global_print_sequence() const
 {
     PrintSequence global_print_seq = PrintSequence::ByDefault;
-    auto curr_preset_config = preset_bundle->prints.get_edited_preset().config;
+    const auto &curr_preset_config = preset_bundle->prints.get_edited_preset().config;
     if (curr_preset_config.has("print_sequence"))
         global_print_seq = curr_preset_config.option<ConfigOptionEnum<PrintSequence>>("print_sequence")->value;
     return global_print_seq;
diff --git a/src/slic3r/GUI/GUI_App.hpp b/src/slic3r/GUI/GUI_App.hpp
index f4c20af60c..1b9b209ff8 100644
--- a/src/slic3r/GUI/GUI_App.hpp
+++ b/src/slic3r/GUI/GUI_App.hpp
@@ -1,23 +1,17 @@
 #ifndef slic3r_GUI_App_hpp_
 #define slic3r_GUI_App_hpp_
 
+#include <functional>
 #include <memory>
 #include <string>
 #include "ActionRegistry.hpp"
 #include "ImGuiWrapper.hpp"
 #include "ConfigWizard.hpp"
 #include "OpenGLManager.hpp"
-#include "PresetBundleDialog.hpp"
 #include "libslic3r/Preset.hpp"
 #include "libslic3r/PresetBundle.hpp"
-#include "slic3r/GUI/DeviceManager.hpp"
 #include "slic3r/GUI/UserNotification.hpp"
-#include "slic3r/Utils/NetworkAgent.hpp"
-#include "slic3r/Utils/BBLCloudServiceAgent.hpp"
-#include "slic3r/GUI/WebViewDialog.hpp"
-#include "slic3r/GUI/WebUserLoginDialog.hpp"
-#include "slic3r/GUI/BindDialog.hpp"
-#include "slic3r/GUI/HMS.hpp"
+#include "slic3r/Utils/CloudProvider.hpp"
 #include "slic3r/GUI/Jobs/UpgradeNetworkJob.hpp"
 #include "slic3r/GUI/HttpServer.hpp"
 #include "../Utils/PrintHost.hpp"
@@ -64,9 +58,14 @@ class ModelObject;
 class Model;
 class UserManager;
 class DeviceManager;
+class MachineObject;
 class NetworkAgent;
+class IPrinterAgent;
 class TaskManager;
 
+// Same typedef as in bambu_networking.hpp, so this header need not include it.
+typedef std::function<bool()> WasCancelledFn;
+
 namespace GUI{
 
 class RemovableDriveManager;
@@ -85,6 +84,8 @@ class ParamsDialog;
 class HMSQuery;
 class ModelMallDialog;
 class PingCodeBindDialog;
+class PresetBundleDialog;
+class ZUserLogin;
 class NetworkErrorDialog;
 class PluginsDialog;
 class SpeedDialWebDialog;
@@ -574,7 +575,6 @@ public:
     void            start_http_server(const std::string& provider = ORCA_CLOUD_PROVIDER);
     void            start_http_server(int port, const std::string& provider = ORCA_CLOUD_PROVIDER);
     void            stop_http_server();
-    void            switch_staff_pick(bool on);
 
     void            on_show_check_privacy_dlg(int online_login = 0, const std::string& provider = ORCA_CLOUD_PROVIDER);
     void            show_check_privacy_dlg(wxCommandEvent& evt);
@@ -588,7 +588,6 @@ public:
     void            persist_window_geometry(wxTopLevelWindow *window, bool default_maximized = false);
     void            update_ui_from_settings();
 
-    bool            switch_language();
     bool            load_language(wxString language, bool initial);
 
     Tab*            get_tab(Preset::Type type);
@@ -806,7 +805,6 @@ private:
     bool            window_pos_restore(wxTopLevelWindow* window, const std::string &name, bool default_maximized = false);
     void            window_pos_sanitize(wxTopLevelWindow* window);
     void            window_pos_center(wxTopLevelWindow *window);
-    bool            select_language();
 
     // Dynamic printer agent selection - internal helpers for switch_printer_agent
     // and the plugin load/unload callbacks (init_plugin_gui_wiring).
@@ -837,7 +835,7 @@ wxDECLARE_EVENT(EVT_UPDATE_BUNDLE_COMPLETE, wxCommandEvent);
 bool is_support_filament(int extruder_id, bool strict_check = true);
 bool is_soluble_filament(int extruder_id);
 // check if the filament for model is in the list
-bool has_filaments(const std::vector<string>& model_filaments);
+bool has_filaments(const std::vector<std::string>& model_filaments);
 } // namespace GUI
 } // Slic3r
 
diff --git a/src/slic3r/GUI/GUI_Factories.cpp b/src/slic3r/GUI/GUI_Factories.cpp
index d8e54978fa..05248c38df 100644
--- a/src/slic3r/GUI/GUI_Factories.cpp
+++ b/src/slic3r/GUI/GUI_Factories.cpp
@@ -1392,7 +1392,7 @@ void MenuFactory::create_default_menu()
 {
     wxMenu* sub_menu_primitives = append_submenu_add_generic(&m_default_menu, ModelVolumeType::INVALID);
     wxMenu* sub_menu_handy = append_submenu_add_handy_model(&m_default_menu, ModelVolumeType::INVALID);
-#ifdef __WINDOWS__
+
     append_submenu(&m_default_menu, sub_menu_primitives, wxID_ANY, _L("Add Primitive"), "", "menu_add_part",
         []() {return true; }, m_parent);
     append_submenu(&m_default_menu, sub_menu_handy, wxID_ANY, _L("Add Handy models"), "", "menu_add_part",
@@ -1400,15 +1400,6 @@ void MenuFactory::create_default_menu()
     append_menu_item(&m_default_menu, wxID_ANY, _L("Add Models"), "", // ORCA: Add Models
         [](wxCommandEvent&) { plater()->add_file(); }, "menu_add_part", &m_default_menu,
         []() {return wxGetApp().plater()->can_add_model(); }, m_parent);
-#else
-    append_submenu(&m_default_menu, sub_menu_primitives, wxID_ANY, _L("Add Primitive"), "", "",
-        []() {return true; }, m_parent);
-    append_submenu(&m_default_menu, sub_menu_handy, wxID_ANY, _L("Add Handy models"), "", "",
-        []() {return true; }, m_parent);
-    append_menu_item(&m_default_menu, wxID_ANY, _L("Add Models"), "", // ORCA: Add Models
-        [](wxCommandEvent&) { plater()->add_file(); }, "", &m_default_menu,
-        []() {return wxGetApp().plater()->can_add_model(); }, m_parent);
-#endif
 
     m_default_menu.AppendSeparator();
 
@@ -1789,7 +1780,6 @@ void MenuFactory::create_plate_menu()
     wxMenu* sub_menu_primitives = append_submenu_add_generic(menu, ModelVolumeType::INVALID);
     wxMenu* sub_menu_handy = append_submenu_add_handy_model(menu, ModelVolumeType::INVALID);
 
-#ifdef __WINDOWS__
     append_submenu(menu, sub_menu_primitives, wxID_ANY, _L("Add Primitive"), "", "menu_add_part",
         []() {return true; }, m_parent);
     append_submenu(menu, sub_menu_handy, wxID_ANY, _L("Add Handy models"), "", "menu_add_part",
@@ -1797,15 +1787,7 @@ void MenuFactory::create_plate_menu()
     append_menu_item(menu, wxID_ANY, _L("Add Models"), "", // ORCA: Add Models
         [](wxCommandEvent&) { plater()->add_file(); }, "menu_add_part", menu,
         []() {return wxGetApp().plater()->can_add_model(); }, m_parent);
-#else
-    append_submenu(menu, sub_menu_primitives, wxID_ANY, _L("Add Primitive"), "", "",
-        []() {return true; }, m_parent);
-    append_submenu(menu, sub_menu_handy, wxID_ANY, _L("Add Handy models"), "", "",
-        []() {return true; }, m_parent);
-    append_menu_item(menu, wxID_ANY, _L("Add Models"), "", // ORCA: Add Models
-        [](wxCommandEvent&) { plater()->add_file(); }, "", menu,
-        []() {return wxGetApp().plater()->can_add_model(); }, m_parent);
-#endif
+
     append_menu_item_replace_all_with_stl(menu);
 
 
diff --git a/src/slic3r/GUI/GUI_ObjectTable.cpp b/src/slic3r/GUI/GUI_ObjectTable.cpp
index 35508c6113..a496eca6d3 100644
--- a/src/slic3r/GUI/GUI_ObjectTable.cpp
+++ b/src/slic3r/GUI/GUI_ObjectTable.cpp
@@ -2578,7 +2578,7 @@ void ObjectGridTable::OnSelectCell(int row, int col)
         return;
     m_panel->m_side_window->Freeze();
     if (row == 0 || col == col_filaments) {
-        m_panel->m_object_settings->UpdateAndShow(row, false, false, false, nullptr, nullptr, std::string());
+        m_panel->m_object_settings->UpdateAndShowRow(row, false, false, false, nullptr, nullptr, std::string());
     }
     else {
         ObjectGridRow* grid_row = m_grid_data[row - 1];
@@ -2588,7 +2588,7 @@ void ObjectGridTable::OnSelectCell(int row, int col)
 
         //m_panel->m_object_settings->get_og()->set_name(GUI::from_u8(grid_row->name.value));
         //m_panel->m_page_text->SetLabel(GUI::from_u8(grid_row->name.value));
-        m_panel->m_object_settings->UpdateAndShow(row, true, is_object, false, object, grid_row->config, grid_col->category);
+        m_panel->m_object_settings->UpdateAndShowRow(row, true, is_object, false, object, grid_row->config, grid_col->category);
 
         std::vector<ObjectVolumeID> object_volume_ids;
         ObjectVolumeID object_volume_id;
diff --git a/src/slic3r/GUI/GUI_ObjectTable.hpp b/src/slic3r/GUI/GUI_ObjectTable.hpp
index a5a0059e1b..0fbd432e02 100644
--- a/src/slic3r/GUI/GUI_ObjectTable.hpp
+++ b/src/slic3r/GUI/GUI_ObjectTable.hpp
@@ -591,16 +591,11 @@ private:
     wxColour            m_hover_colour;
     wxBoxSizer*         m_top_sizer{nullptr};
     wxBoxSizer*         m_page_sizer{nullptr};
-    wxBoxSizer*         m_page_top_sizer{nullptr};
-    wxTextCtrl*         m_search_line{ nullptr };
     ObjectGrid*         m_object_grid{nullptr};
     ObjectGridTable*    m_object_grid_table{nullptr};
-    wxStaticText*       m_page_text{nullptr};
-    ScalableButton*     m_global_reset{nullptr};
     wxScrolledWindow*   m_side_window{nullptr};
     ObjectTableSettings* m_object_settings{ nullptr };
     Model*              m_model{nullptr};
-    ModelConfig*        m_config {nullptr};
     Plater*             m_plater{nullptr};
 
     int                 m_cur_row { -1 };
@@ -625,8 +620,6 @@ class ObjectTableDialog : public GUI::DPIDialog
     const int POPUP_HEIGHT  = FromDIP(1024);
 
     //wxPanel*             m_panel{ nullptr };
-    wxBoxSizer*          m_top_sizer{ nullptr };
-    wxStaticText*        m_static_title{ nullptr };
     //wxTimer*             m_refresh_timer;
     ObjectTablePanel*    m_obj_panel{ nullptr };
     Model*               m_model{ nullptr };
diff --git a/src/slic3r/GUI/GUI_ObjectTableSettings.cpp b/src/slic3r/GUI/GUI_ObjectTableSettings.cpp
index 2290018419..4cd272840f 100644
--- a/src/slic3r/GUI/GUI_ObjectTableSettings.cpp
+++ b/src/slic3r/GUI/GUI_ObjectTableSettings.cpp
@@ -463,7 +463,7 @@ void ObjectTableSettings::update_config_values(bool is_object, ModelObject* obje
     m_table->reload_cell_data(m_current_row, category);
 }
 
-void ObjectTableSettings::UpdateAndShow(int row, const bool show, bool is_object, bool is_multiple_selection, ModelObject* object, ModelConfig* config, const std::string& category)
+void ObjectTableSettings::UpdateAndShowRow(int row, const bool show, bool is_object, bool is_multiple_selection, ModelObject* object, ModelConfig* config, const std::string& category)
 {
     m_current_row = row;
     m_current_category = category;
diff --git a/src/slic3r/GUI/GUI_ObjectTableSettings.hpp b/src/slic3r/GUI/GUI_ObjectTableSettings.hpp
index 39e7e514e2..24e3d427a9 100644
--- a/src/slic3r/GUI/GUI_ObjectTableSettings.hpp
+++ b/src/slic3r/GUI/GUI_ObjectTableSettings.hpp
@@ -71,7 +71,7 @@ public:
     //return visible count
     int         update_extra_column_visible_status(ConfigOptionsGroup* option_group, const std::vector<SimpleSettingData>& option_keys, ModelConfig* config);
     void        update_config_values(bool is_object, ModelObject* object, ModelConfig* config, const std::string& category, const std::string& changed_opt_key = "");
-    void        UpdateAndShow(int row, const bool show, bool is_object, bool is_multiple_selection, ModelObject* object, ModelConfig* config, const std::string& category);
+    void        UpdateAndShowRow(int row, const bool show, bool is_object, bool is_multiple_selection, ModelObject* object, ModelConfig* config, const std::string& category);
     void        ValueChanged(int row, bool is_object, ModelObject* object, ModelConfig* config, const std::string& category, const std::string& key);
     void        resetAllValues(int row, bool is_object, ModelObject* object, ModelConfig* config, const std::string& category);
     void        msw_rescale();
diff --git a/src/slic3r/GUI/GUI_Utils.cpp b/src/slic3r/GUI/GUI_Utils.cpp
index cb8ba45c6b..10dd29c9c1 100644
--- a/src/slic3r/GUI/GUI_Utils.cpp
+++ b/src/slic3r/GUI/GUI_Utils.cpp
@@ -69,6 +69,8 @@ CopyFileResult copy_file_gui(const std::string &from, const std::string &to, std
     HANDLE handlesrc = nullptr;
     HANDLE handledst = nullptr;
     CopyFileResult ret = SUCCESS;
+    DWORD size = 0;
+    DWORD dwRead = 0, dwWrite = 0;
 
     handlesrc = CreateFile(src.wc_str(),
         GENERIC_READ,
@@ -96,13 +98,12 @@ CopyFileResult copy_file_gui(const std::string &from, const std::string &to, std
         goto __finished;
     }
 
-    DWORD size=GetFileSize(handlesrc,NULL);
+    size = GetFileSize(handlesrc,NULL);
     buff = new char[size+1];
-    DWORD dwRead=0,dwWrite;
     result = ReadFile(handlesrc, buff, size, &dwRead, NULL);
     if (!result) {
         DWORD errCode = GetLastError();
-        error_message = "Error: " + errCode;
+        error_message = "Error: " + std::to_string(errCode);
         ret = FAIL_COPY_FILE;
         goto __finished;
     }
@@ -110,7 +111,7 @@ CopyFileResult copy_file_gui(const std::string &from, const std::string &to, std
     result = WriteFile(handledst,buff,size,&dwWrite,NULL);
     if (!result) {
         DWORD errCode = GetLastError();
-        error_message = "Error: " + errCode;
+        error_message = "Error: " + std::to_string(errCode);
         ret = FAIL_COPY_FILE;
         goto __finished;
     }
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp b/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
index 012e62b2bc..99ad00fe55 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
@@ -1,5 +1,7 @@
 // Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro.
 #include "GLGizmoAdvancedCut.hpp"
+#include "slic3r/GUI/Widgets/ProgressDialog.hpp"
+#include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GLCanvas3D.hpp"
 
 #include <glad/gl.h>
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp b/src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp
index 709e7b5b21..6d9e810815 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp
@@ -1,6 +1,7 @@
 #include "GLGizmoBrimEars.hpp"
 #include <glad/gl.h>
 #include "slic3r/GUI/GLCanvas3D.hpp"
+#include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/Camera.hpp"
 #include "slic3r/GUI/Gizmos/GLGizmosCommon.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
@@ -342,7 +343,7 @@ bool GLGizmoBrimEars::on_mouse(const wxMouseEvent& mouse_event)
 // concludes that the event was not intended for it, it should return false.
 bool GLGizmoBrimEars::gizmo_event(SLAGizmoEventType action, const Vec2d &mouse_position, bool shift_down, bool alt_down, bool control_down)
 {
-    if (action != SLAGizmoEventType::MouseWheelDown || action != SLAGizmoEventType::MouseWheelUp || action != SLAGizmoEventType::Moving) {
+    if (action != SLAGizmoEventType::MouseWheelDown && action != SLAGizmoEventType::MouseWheelUp && action != SLAGizmoEventType::Moving) {
         apply_radius_change();
     }
 
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp b/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
index e6cbb7d0ef..109e0fe5bc 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
@@ -94,7 +94,6 @@ class GLGizmoCut3D : public GLGizmoBase
     GLModel m_reference_radius;
     GLModel m_angle_arc;
 
-    Vec3d   m_old_center;
     Vec3d   m_cut_normal;
 
     struct InvalidConnectorsStatistics
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp b/src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
index f190e1ad97..035fb895aa 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
@@ -122,7 +122,7 @@ bool GLGizmoFdmSupports::on_init()
         {ctrl + _L("Mouse wheel"), _L("Gap area")}
     };
 
-    memset(&m_print_instance, 0, sizeof(m_print_instance));
+    m_print_instance = PrintInstance();
     return true;
 }
 
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
index a040d96bd5..e9d8598423 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
@@ -4,7 +4,7 @@
 #include "slic3r/GUI/Plater.hpp"
 #include "slic3r/GUI/Gizmos/GLGizmosCommon.hpp"
 
-#include "libslic3r/Geometry/ConvexHull.hpp"
+#include "libslic3r/LayOnFace.hpp"
 #include "libslic3r/Model.hpp"
 
 #include <numeric>
@@ -45,10 +45,10 @@ void GLGizmoFlatten::data_changed(bool is_serializing)
     const ModelObject *model_object = nullptr;
     int                instance_id = -1;
     if (selection.is_single_full_instance() ||
-        selection.is_from_single_object() ) {        
+        selection.is_from_single_object() ) {
         model_object = selection.get_model()->objects[selection.get_object_idx()];
         instance_id = selection.get_instance_idx();
-    }    
+    }
     set_flattening_data(model_object, instance_id);
 }
 
@@ -86,7 +86,7 @@ void GLGizmoFlatten::on_render()
     GLShaderProgram* shader = wxGetApp().get_shader("flat");
     if (shader == nullptr)
         return;
-    
+
     shader->start_using();
     glsafe(::glClear(GL_DEPTH_BUFFER_BIT));
 
@@ -152,134 +152,18 @@ void GLGizmoFlatten::set_flattening_data(const ModelObject* model_object, int in
 void GLGizmoFlatten::update_planes()
 {
     const ModelObject* mo = m_c->selection_info()->model_object();
-    TriangleMesh ch;
-    for (const ModelVolume* vol : mo->volumes) {
-        if (vol->type() != ModelVolumeType::MODEL_PART)
-            continue;
-        TriangleMesh vol_ch = vol->get_convex_hull();
-        vol_ch.transform(vol->get_matrix());
-        ch.merge(vol_ch);
-    }
-    ch = ch.convex_hull_3d();
+    const Transform3d &inst_matrix = mo->instances.front()->get_matrix_no_offset();
+    // The candidate faces are shared with the CLI --ground-* options, the rest only prepares them for rendering.
+    std::vector<LayOnFacePlane> planes = lay_on_face_planes(*mo, inst_matrix);
     m_planes.clear();
     on_unregister_raycasters_for_picking();
-    const Transform3d &inst_matrix = mo->instances.front()->get_matrix_no_offset();
 
-    // Following constants are used for discarding too small polygons.
-    const float minimal_area = 5.f; // in square mm (world coordinates)
-    const float minimal_side = 1.f; // mm
-    const float minimal_angle = 1.f; // degree, initial value was 10, but cause bugs
+    // We only keep the 254 largest planes (because of the picking pass limitations):
+    planes.resize(std::min((int)planes.size(), 254));
 
-    // Now we'll go through all the facets and append Points of facets sharing the same normal.
-    // This part is still performed in mesh coordinate system.
-    const int                num_of_facets  = ch.facets_count();
-    const std::vector<Vec3f> face_normals   = its_face_normals(ch.its);
-    const std::vector<Vec3i32> face_neighbors = its_face_neighbors(ch.its);
-    std::vector<int>         facet_queue(num_of_facets, 0);
-    std::vector<bool>        facet_visited(num_of_facets, false);
-    int                      facet_queue_cnt = 0;
-    const stl_normal*        normal_ptr      = nullptr;
-    int                      facet_idx       = 0;
-    while (1) {
-        // Find next unvisited triangle:
-        for (; facet_idx < num_of_facets; ++ facet_idx)
-            if (!facet_visited[facet_idx]) {
-                facet_queue[facet_queue_cnt ++] = facet_idx;
-                facet_visited[facet_idx] = true;
-                normal_ptr = &face_normals[facet_idx];
-                m_planes.emplace_back();
-                break;
-            }
-        if (facet_idx == num_of_facets)
-            break; // Everything was visited already
-
-        while (facet_queue_cnt > 0) {
-            int facet_idx = facet_queue[-- facet_queue_cnt];
-            const stl_normal& this_normal = face_normals[facet_idx];
-            if (std::abs(this_normal(0) - (*normal_ptr)(0)) < 0.001 && std::abs(this_normal(1) - (*normal_ptr)(1)) < 0.001 && std::abs(this_normal(2) - (*normal_ptr)(2)) < 0.001) {
-                const Vec3i32 face = ch.its.indices[facet_idx];
-                for (int j=0; j<3; ++j)
-                    m_planes.back().vertices.emplace_back(ch.its.vertices[face[j]].cast<double>());
-
-                facet_visited[facet_idx] = true;
-                for (int j = 0; j < 3; ++ j)
-                    if (int neighbor_idx = face_neighbors[facet_idx][j]; neighbor_idx >= 0 && ! facet_visited[neighbor_idx])
-                        facet_queue[facet_queue_cnt ++] = neighbor_idx;
-            }
-        }
-        m_planes.back().normal = normal_ptr->cast<double>();
-
-        Pointf3s& verts = m_planes.back().vertices;
-        // Now we'll transform all the points into world coordinates, so that the areas, angles and distances
-        // make real sense.
-        verts = transform(verts, inst_matrix);
-
-        // if this is a just a very small triangle, remove it to speed up further calculations (it would be rejected later anyway):
-        if (verts.size() == 3 &&
-            ((verts[0] - verts[1]).norm() < minimal_side
-            || (verts[0] - verts[2]).norm() < minimal_side
-            || (verts[1] - verts[2]).norm() < minimal_side))
-            m_planes.pop_back();
-    }
-
-    // Let's prepare transformation of the normal vector from mesh to instance coordinates.
-    const Matrix3d normal_matrix = inst_matrix.matrix().block(0, 0, 3, 3).inverse().transpose();
-
-    // Now we'll go through all the polygons, transform the points into xy plane to process them:
-    for (unsigned int polygon_id=0; polygon_id < m_planes.size(); ++polygon_id) {
-        Pointf3s& polygon = m_planes[polygon_id].vertices;
-        const Vec3d& normal = m_planes[polygon_id].normal;
-
-        // transform the normal according to the instance matrix:
-        const Vec3d normal_transformed = normal_matrix * normal;
-
-        // We are going to rotate about z and y to flatten the plane
-        Eigen::Quaterniond q;
-        Transform3d m = Transform3d::Identity();
-        m.matrix().block(0, 0, 3, 3) = q.setFromTwoVectors(normal_transformed, Vec3d::UnitZ()).toRotationMatrix();
-        polygon = transform(polygon, m);
-
-        // Now to remove the inner points. We'll misuse Geometry::convex_hull for that, but since
-        // it works in fixed point representation, we will rescale the polygon to avoid overflows.
-        // And yes, it is a nasty thing to do. Whoever has time is free to refactor.
-        Vec3d bb_size = BoundingBoxf3(polygon).size();
-        float sf = std::min(1./bb_size(0), 1./bb_size(1));
-        Transform3d tr = Geometry::scale_transform({ sf, sf, 1.f });
-        polygon = transform(polygon, tr);
-        polygon = Slic3r::Geometry::convex_hull(polygon);
-        polygon = transform(polygon, tr.inverse());
-
-        // Calculate area of the polygons and discard ones that are too small
-        float& area = m_planes[polygon_id].area;
-        area = 0.f;
-        for (unsigned int i = 0; i < polygon.size(); i++) // Shoelace formula
-            area += polygon[i](0)*polygon[i + 1 < polygon.size() ? i + 1 : 0](1) - polygon[i + 1 < polygon.size() ? i + 1 : 0](0)*polygon[i](1);
-        area = 0.5f * std::abs(area);
-
-        bool discard = false;
-        if (area < minimal_area)
-            discard = true;
-        else {
-            // We also check the inner angles and discard polygons with angles smaller than the following threshold
-            const double angle_threshold = ::cos(minimal_angle * (double)PI / 180.0);
-
-            for (unsigned int i = 0; i < polygon.size(); ++i) {
-                const Vec3d& prec = polygon[(i == 0) ? polygon.size() - 1 : i - 1];
-                const Vec3d& curr = polygon[i];
-                const Vec3d& next = polygon[(i == polygon.size() - 1) ? 0 : i + 1];
-
-                if ((prec - curr).normalized().dot((next - curr).normalized()) > angle_threshold) {
-                    discard = true;
-                    break;
-                }
-            }
-        }
-
-        if (discard) {
-            m_planes[polygon_id--] = std::move(m_planes.back());
-            m_planes.pop_back();
-            continue;
-        }
+    for (LayOnFacePlane& plane : planes) {
+        // The outline is convex and lies in the plane frame, where the plane is horizontal.
+        Pointf3s& polygon = plane.outline;
 
         // We will shrink the polygon a little bit so it does not touch the object edges:
         Vec3d centroid = std::accumulate(polygon.begin(), polygon.end(), Vec3d(0.0, 0.0, 0.0));
@@ -332,13 +216,12 @@ void GLGizmoFlatten::update_planes()
             b(2) += 0.1f;
 
         // Transform back to 3D (and also back to mesh coordinates)
-        polygon = transform(polygon, inst_matrix.inverse() * m.inverse());
+        m_planes.emplace_back();
+        m_planes.back().normal = plane.normal;
+        m_planes.back().area = plane.area;
+        m_planes.back().vertices = transform(polygon, inst_matrix.inverse() * plane.to_plane_frame.inverse());
     }
 
-    // We'll sort the planes by area and only keep the 254 largest ones (because of the picking pass limitations):
-    std::sort(m_planes.rbegin(), m_planes.rend(), [](const PlaneData& a, const PlaneData& b) { return a.area < b.area; });
-    m_planes.resize(std::min((int)m_planes.size(), 254));
-
     // Planes are finished - let's save what we calculated it from:
     m_volumes_matrices.clear();
     m_volumes_types.clear();
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp b/src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp
index 6689fcdcea..d807e466c8 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp
@@ -4,6 +4,7 @@
 #include "libslic3r/Print.hpp"
 
 #include "slic3r/GUI/GLCanvas3D.hpp"
+#include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
 #include "slic3r/GUI/GUI_ObjectList.hpp"
 #include "slic3r/GUI/ImGuiWrapper.hpp"
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp b/src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
index e21498163a..6f7d6fed58 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
@@ -1,4 +1,5 @@
 #include "GLGizmoMeasure.hpp"
+#include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GLCanvas3D.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
 #include "slic3r/GUI/Plater.hpp"
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp b/src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
index f4fa1fbbb9..6a08d5eff4 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
@@ -343,12 +343,12 @@ void GLGizmoSimplify::on_render_input_window(float x, float y, float bottom_limi
     ImGui::PushStyleVar(ImGuiStyleVar_ItemSpacing,ImVec2(10,20));
     if (is_worker_running) { // apply or preview
         // draw progress bar
-        std::string progress_text = GUI::format("%1%", std::to_string(progress)) + "%%";
+        std::string progress_text = GUI::format("%1%", std::to_string(progress)) + "%";
         ImVec2 progress_size(bottom_left_width - space_size, 0.0f);
         ImGui::BBLProgressBar2(progress / 100., progress_size);
         ImGui::SameLine();
         ImGui::AlignTextToFramePadding();
-        ImGui::TextColored(ImVec4(0.42f, 0.42f, 0.42f, 1.00f), progress_text.c_str());
+        ImGui::TextColored(ImVec4(0.42f, 0.42f, 0.42f, 1.00f), "%s", progress_text.c_str());
         ImGui::SameLine(bottom_left_width + slider_width +  m_imgui->scaled(1.0f));
     } else {
         ImGui::Dummy(ImVec2(bottom_left_width - space_size, -1));
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoUtils.cpp b/src/slic3r/GUI/Gizmos/GLGizmoUtils.cpp
index 00d608b80a..75dca0855d 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoUtils.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoUtils.cpp
@@ -32,6 +32,8 @@
 
 */
 
+using namespace std::string_view_literals;
+
 namespace Slic3r::GUI::GLGizmoUtils {
 
     void render_tooltip_button(
diff --git a/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp b/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
index 7c4a2afd38..5d70fde833 100644
--- a/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
+++ b/src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
@@ -702,7 +702,7 @@ bool GizmoObjectManipulation::reset_zero_button(ImGuiWrapper *imgui_wrapper,  bo
 
      for (int i = 0; i < number; i++)
      {
-         char buf[3][64] = {0};
+         char buf[3][64] = {};
          float buf_size[3] = {0};
          for (int j = 0; j < 3; j++) {
              ImGui::DataTypeFormatString(buf[j], IM_ARRAYSIZE(buf[j]), ImGuiDataType_Double, (void *) &vec[i][j], "%.2f");
diff --git a/src/slic3r/GUI/GradientCurveEditor.cpp b/src/slic3r/GUI/GradientCurveEditor.cpp
index 5b1073d231..6d38ef81a5 100644
--- a/src/slic3r/GUI/GradientCurveEditor.cpp
+++ b/src/slic3r/GUI/GradientCurveEditor.cpp
@@ -1,4 +1,5 @@
 #include "GradientCurveEditor.hpp"
+#include "FilamentBitmapUtils.hpp"
 #include "GUI_App.hpp"
 #include "GuiColor.hpp"
 #include "I18N.hpp"
@@ -19,23 +20,13 @@ namespace GUI {
 wxDEFINE_EVENT(wxEVT_GRADIENT_CURVE_CHANGED, wxCommandEvent);
 
 namespace {
-// Layout ratios of the plot rect within the widget, taken from a 214 x 180 px reference drawing.
-// Plot rect occupies the upper-left region; right + bottom margins host axis arrows / labels.
-constexpr double kPlotLeftRatio   = 0.0316;
-constexpr double kPlotRightRatio  = 0.6766;
-constexpr double kPlotTopRatio    = 0.1529;
-constexpr double kPlotBottomRatio = 0.8474;
-constexpr int    kGridDivisions   = 9;     // 10 grid lines including the outer borders.
-
-// Hit / stroke (DIP).
+// Hit / stroke (DIP). The plot-rect ratios, grid divisions, axis/arrow geometry and the
+// near-background outline threshold now live in FilamentBitmapUtils so the read-only Publish
+// preview and this editor stay pixel-identical.
 constexpr int kHitRadius        = 6;
 constexpr int kCurveHitRadius   = 5;
-constexpr int kPointRadius      = 4;   // anchor outer radius (DIP)
 constexpr int kStrokeUnselected = 2;
 constexpr int kStrokeSelected   = 4;
-constexpr int kStrokeAxis       = 2;   // axis line width (px, no DPI scaling - matches kGridColor pen and 2DBed convention)
-constexpr int kAxisArrowHalf    = 5;   // half-base of the axis arrow triangle (DIP)
-constexpr int kAxisArrowLen     = 10;  // length of the axis arrow triangle (DIP)
 
 // Light-mode design tokens. Resolved through StateColor::darkModeColorFor()
 // at paint time so the editor follows the app theme (#EEEEEE -> #4C4C55, #6B6B6B ->
@@ -46,12 +37,6 @@ const wxColour kAxisColor   (107, 107, 107);   // #6B6B6B grey 700
 const wxColour kLabelMuted  (107, 107, 107);   // #6B6B6B grey 700
 const wxColour kLabelStrong ( 38,  46,  48);   // #262E30 grey 900
 const wxColour kOutlineColor(172, 172, 172);   // #ACACAC dimmed elements
-
-// LAB (DeltaE76) threshold for "curve color is too close to the background": below it the curve
-// gets a subtle outline so it does not visually vanish, otherwise it is drawn plain. Looser than
-// the 5.0 of FlushPredict::is_similar_color, so a pastel pink on white still gets an outline.
-constexpr float kBgSimilarThreshold = 15.0f;
-constexpr int   kOutlineExtraDip    = 2;
 } // namespace
 
 GradientCurveEditor::GradientCurveEditor(wxWindow* parent,
@@ -177,15 +162,8 @@ void GradientCurveEditor::emit_changed()
 
 wxRect GradientCurveEditor::plot_rect() const
 {
-    const wxSize sz = GetClientSize();
-    const int x  = static_cast<int>(std::lround(sz.x * kPlotLeftRatio));
-    const int y  = static_cast<int>(std::lround(sz.y * kPlotTopRatio));
-    const int x2 = static_cast<int>(std::lround(sz.x * kPlotRightRatio));
-    const int y2 = static_cast<int>(std::lround(sz.y * kPlotBottomRatio));
-    // Force square 1:1 so X/Y axes share the same scale and grid cells stay square. Anchor at
-    // the top-left so the "100%" labels on the bottom/right still align with the plot edges.
-    const int side = std::max(1, std::min(x2 - x, y2 - y));
-    return wxRect(x, y, side, side);
+    // Square 1:1 plot, shared with the Publish dialog's read-only preview.
+    return mixed_gradient_plot_rect(GetClientSize());
 }
 
 wxPoint2DDouble GradientCurveEditor::data_to_px_f(double x, double y) const
@@ -330,171 +308,52 @@ void GradientCurveEditor::on_paint(wxPaintEvent& /*evt*/)
     raw_dc.SetBackground(wxBrush(bg));
     raw_dc.Clear();
 
-    // Render through wxGCDC so curves, arrows and anchor circles get anti-aliased; the buffered
-    // DC is the actual back buffer that gets blitted to the window.
-    wxGCDC dc(raw_dc);
-    // The curve and its anchors are drawn straight on the graphics context so their
-    // coordinates stay sub-pixel accurate (see data_to_px_f).
-    wxGraphicsContext* gc = dc.GetGraphicsContext();
-
-    const wxRect rc = plot_rect();
-    if (rc.width <= 0 || rc.height <= 0)
-        return;
-
-    // 10x10 light grid (10 lines including outer borders, 9 equal divisions).
-    dc.SetPen(wxPen(grid_color, 1));
-    for (int i = 0; i <= kGridDivisions; ++i) {
-        const int x = rc.x + rc.width  * i / kGridDivisions;
-        const int y = rc.y + rc.height * i / kGridDivisions;
-        dc.DrawLine(x, rc.y, x, rc.y + rc.height);
-        dc.DrawLine(rc.x, y, rc.x + rc.width, y);
-    }
-
-    // Set the label font first so text width measurements drive arrow / label placement.
-    wxFont label_font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
-    label_font.SetPointSize(std::max(7, label_font.GetPointSize() - 1));
-    dc.SetFont(label_font);
-
-    const wxString axis_y_title = _L("Material Ratio");
-    const wxString axis_x_title = _L("Model Height");
-    const wxString pct_text     = wxT("100%");
-    const wxSize   x_title_sz   = dc.GetTextExtent(axis_x_title);
-    const wxSize   y_title_sz   = dc.GetTextExtent(axis_y_title);
-
-    wxFont strong_font = label_font;
-    strong_font.SetWeight(wxFONTWEIGHT_SEMIBOLD);
-    dc.SetFont(strong_font);
-    const wxSize pct_text_sz = dc.GetTextExtent(pct_text);
-    dc.SetFont(label_font);
-
-    // Axes (grey 700) with filled triangle arrows. Y-axis extends above the plot top to the
-    // canvas top edge; X-axis extends past the plot right toward the canvas right edge.
-    const int arrow_half = FromDIP(kAxisArrowHalf);
-    const int arrow_len  = FromDIP(kAxisArrowLen);
-    const wxSize sz      = GetClientSize();
-    dc.SetPen(wxPen(axis_color, kStrokeAxis));
-    dc.SetBrush(wxBrush(axis_color));
-
-    // Y-axis: vertical line at plot_left, from arrow tip near canvas top down to plot bottom.
-    const int y_axis_x   = rc.x;
-    const int y_title_pct_gap = FromDIP(1);
-    const int y_title_bottom_pad = FromDIP(2);
-    const int y_title_y = std::max(0, rc.y - y_title_sz.y - y_title_pct_gap - pct_text_sz.y - y_title_bottom_pad);
-    const int y_arrow_tip_y = y_title_y;
-    const int y_arrow_ty = y_arrow_tip_y + arrow_len;
-    dc.DrawLine(y_axis_x, y_arrow_ty, y_axis_x, rc.y + rc.height);
-    {
-        wxPoint tri[3] = {
-            wxPoint(y_axis_x,              y_arrow_tip_y),
-            wxPoint(y_axis_x - arrow_half, y_arrow_ty),
-            wxPoint(y_axis_x + arrow_half, y_arrow_ty),
+    // Render the plot (grid, axes, labels, curves, anchors) through the shared painter so the
+    // interactive editor and the Publish dialog's read-only preview stay pixel-identical. The
+    // curves are handed over as sub-pixel polylines and anti-alias inside the helper.
+    std::vector<MixedGradientCurve> curves;
+    std::vector<wxPoint2DDouble>    anchors;
+    if (m_points.size() >= 2) {
+        auto color_for_curve = [&](int curve_idx) -> wxColour {
+            wxColour c = (curve_idx == 0) ? m_color_low : m_color_high;
+            // Transparent filaments (alpha == 0, e.g. #FFFFFF00) would be invisible.
+            if (c.Alpha() == 0)
+                c.Set(c.Red(), c.Green(), c.Blue(), 150);
+            return c;
         };
-        dc.DrawPolygon(3, tri);
-    }
 
-    // X-axis arrow tip: stays just past the plot ideally, but is clamped so the trailing
-    // "Material Ratio" label still fits inside the canvas without overlapping the arrow.
-    const int x_axis_y       = rc.y + rc.height;
-    const int x_label_gap    = FromDIP(4);
-    const int x_edge_pad     = FromDIP(6);
-    const int x_arrow_ideal  = rc.x + rc.width + FromDIP(10);
-    const int x_arrow_max    = sz.x - x_title_sz.x - x_label_gap - x_edge_pad - arrow_len;
-    const int x_arrow_tx     = std::max(rc.x + rc.width + arrow_len,
-                                        std::min(x_arrow_ideal, x_arrow_max));
-    const int x_arrow_tip_x  = x_arrow_tx + arrow_len;
-    const int x_title_x      = x_arrow_tip_x + x_label_gap;
-    dc.DrawLine(rc.x, x_axis_y, x_arrow_tx, x_axis_y);
-    {
-        wxPoint tri[3] = {
-            wxPoint(x_arrow_tip_x,          x_axis_y),
-            wxPoint(x_arrow_tx,             x_axis_y - arrow_half),
-            wxPoint(x_arrow_tx,             x_axis_y + arrow_half),
+        auto build_polyline = [&](int curve_idx) -> std::vector<wxPoint2DDouble> {
+            const int samples = std::max(128, plot_rect().width * 2);
+            std::vector<wxPoint2DDouble> poly;
+            poly.reserve(samples + 1);
+            for (int s = 0; s <= samples; ++s) {
+                const double x  = double(s) / samples;
+                const double y0 = sample_curve_y(x);
+                const double vy = to_visual_y(curve_idx, y0);
+                poly.push_back(data_to_px_f(x, vy));
+            }
+            return poly;
         };
-        dc.DrawPolygon(3, tri);
-    }
 
-    // Labels.
-    // "Model Height" and "100%" share the same left x; the gap is larger than the
-    // axis-arrow half-base so the text never visually touches the Y-axis arrow.
-    const int label_left_x = y_axis_x + FromDIP(10);
-    dc.SetTextForeground(label_muted);
-    dc.DrawText(axis_y_title, label_left_x, y_title_y);
-
-    dc.SetFont(strong_font);
-    dc.SetTextForeground(label_strong);
-    dc.DrawText(pct_text, label_left_x, y_title_y + y_title_sz.y + y_title_pct_gap);
-
-    // Bottom-right "100%" sits under the right end of the plot; "Material Ratio" follows the
-    // X-axis arrow tip (placement was already clamped above to leave room).
-    dc.DrawText(pct_text, rc.x + rc.width - pct_text_sz.x, x_axis_y);
-    dc.SetFont(label_font);
-    dc.SetTextForeground(label_muted);
-    dc.DrawText(axis_x_title, x_title_x, x_axis_y - x_title_sz.y / 2);
-
-    if (m_points.size() < 2 || !gc)
-        return;
-
-    auto color_for_curve = [&](int curve_idx) -> wxColour {
-        wxColour c = (curve_idx == 0) ? m_color_low : m_color_high;
-        // Transparent filaments (alpha == 0, e.g. #FFFFFF00) would be invisible.
-        // Lift alpha so the curve stays visible while still hinting at transparency.
-        if (c.Alpha() == 0)
-            c.Set(c.Red(), c.Green(), c.Blue(), 150);
-        return c;
-    };
-
-    auto build_polyline = [&](int curve_idx) -> std::vector<wxPoint2DDouble> {
-        const int samples = std::max(128, rc.width * 2);
-        std::vector<wxPoint2DDouble> poly;
-        poly.reserve(samples + 1);
-        for (int s = 0; s <= samples; ++s) {
-            const double x  = double(s) / samples;
-            const double y0 = sample_curve_y(x);
-            const double vy = to_visual_y(curve_idx, y0);
-            poly.push_back(data_to_px_f(x, vy));
+        // Draw unselected first so the selected curve sits on top.
+        const int other = 1 - m_selected_curve;
+        for (const int idx : {other, m_selected_curve}) {
+            std::vector<wxPoint2DDouble> pts = build_polyline(idx);
+            if (pts.empty())
+                continue;
+            curves.push_back({std::move(pts), color_for_curve(idx), idx == m_selected_curve ? kStrokeSelected : kStrokeUnselected});
         }
-        return poly;
-    };
 
-    // Only the geometry goes through the graphics context: dc.DrawLines() takes integer wxPoint
-    // and would quantize the curve back to whole pixels. The pen is still set on the dc, which
-    // forwards it here while keeping its own cached state in sync for later dc drawing.
-    auto draw_polyline = [&](const std::vector<wxPoint2DDouble>& poly, const wxColour& col, int stroke_dip) {
-        dc.SetPen(wxPen(col, FromDIP(stroke_dip)));
-        gc->StrokeLines(poly.size(), poly.data());
-    };
-
-    // Outline only when the curve color is perceptually close to the background; otherwise
-    // the plain filament color reads fine and the extra stroke would look heavy.
-    auto needs_outline = [&](const wxColour& c) {
-        return calc_color_distance(c, bg) < kBgSimilarThreshold;
-    };
-
-    auto draw_one = [&](int curve_idx, int stroke_dip) {
-        const auto       poly = build_polyline(curve_idx);
-        const wxColour   col  = color_for_curve(curve_idx);
-        if (needs_outline(col))
-            draw_polyline(poly, outline_color, stroke_dip + kOutlineExtraDip);
-        draw_polyline(poly, col, stroke_dip);
-    };
-
-    // Draw unselected first so the selected curve sits on top.
-    const int other = 1 - m_selected_curve;
-    draw_one(other,            kStrokeUnselected);
-    draw_one(m_selected_curve, kStrokeSelected);
-
-    // Control points (selected curve only): hollow circle with axis-color border, theme-aware fill.
-    // Drawn on the graphics context with a sub-pixel center so the ring stays centered on the
-    // curve instead of drifting up to half a pixel off it; pen and brush go through the dc for
-    // the same reason as in draw_polyline above.
-    const double r = FromDIP(kPointRadius);
-    dc.SetPen(wxPen(axis_color, 1));
-    dc.SetBrush(wxBrush(point_fill));
-    for (size_t i = 0; i < m_points.size(); ++i) {
-        const double vy = to_visual_y(m_selected_curve, m_points[i].y);
-        const wxPoint2DDouble p = data_to_px_f(m_points[i].x, vy);
-        gc->DrawEllipse(p.m_x - r, p.m_y - r, r * 2, r * 2);
+        // Control points (selected curve only).
+        anchors.reserve(m_points.size());
+        for (size_t i = 0; i < m_points.size(); ++i) {
+            const double vy = to_visual_y(m_selected_curve, m_points[i].y);
+            anchors.push_back(data_to_px_f(m_points[i].x, vy));
+        }
     }
+
+    const MixedGradientTheme theme{bg, grid_color, axis_color, label_muted, label_strong, outline_color, point_fill};
+    draw_mixed_gradient_plot(raw_dc, GetClientSize(), curves, anchors, theme);
 }
 
 void GradientCurveEditor::on_left_down(wxMouseEvent& evt)
diff --git a/src/slic3r/GUI/HMSPanel.hpp b/src/slic3r/GUI/HMSPanel.hpp
index 49910590b8..25ac56de96 100644
--- a/src/slic3r/GUI/HMSPanel.hpp
+++ b/src/slic3r/GUI/HMSPanel.hpp
@@ -25,7 +25,6 @@ class HMSNotifyItem : public wxPanel
     wxStaticBitmap *m_bitmap_notify;
     wxStaticBitmap *m_bitmap_arrow;
     wxStaticText *  m_hms_content;
-    wxHtmlWindow *  m_html;
     wxPanel *       m_staticline;
 
     wxBitmap m_img_notify_lv1;
diff --git a/src/slic3r/GUI/HttpServer.cpp b/src/slic3r/GUI/HttpServer.cpp
index afdc46e9f0..ef26f20173 100644
--- a/src/slic3r/GUI/HttpServer.cpp
+++ b/src/slic3r/GUI/HttpServer.cpp
@@ -4,6 +4,10 @@
 #include "slic3r/Utils/Http.hpp"
 #include "slic3r/Utils/NetworkAgent.hpp"
 #include "slic3r/Utils/BBLNetworkPlugin.hpp"
+#include "libslic3r/Thread.hpp"
+#include <nlohmann/json.hpp>
+
+using json = nlohmann::json;
 
 namespace Slic3r {
 namespace GUI {
diff --git a/src/slic3r/GUI/IMSlider.cpp b/src/slic3r/GUI/IMSlider.cpp
index c008963646..fa777b6a37 100644
--- a/src/slic3r/GUI/IMSlider.cpp
+++ b/src/slic3r/GUI/IMSlider.cpp
@@ -1,6 +1,7 @@
 #include "IMSlider.hpp"
 #include "libslic3r/GCode.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
 #include "NotificationManager.hpp"
 #include "Widgets/StateColor.hpp"
 #ifndef IMGUI_DEFINE_MATH_OPERATORS
@@ -790,7 +791,7 @@ void IMSlider::draw_ticks(const ImRect& slideable_region) {
 
 void IMSlider::show_tooltip(const std::string tooltip) {
     ImGui::PushStyleVar(ImGuiStyleVar_WindowPadding, { 6 * m_scale, 3 * m_scale });
-    ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, { 3 * m_scale });
+    ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, 3 * m_scale);
     ImGui::PushStyleColor(ImGuiCol_PopupBg, ImGuiWrapper::COL_WINDOW_BACKGROUND);
     ImGui::PushStyleColor(ImGuiCol_Border, { 0,0,0,0 });
     ImGui::PushStyleColor(ImGuiCol_Text, ImVec4(1.00f, 1.00f, 1.00f, 1.00f));
diff --git a/src/slic3r/GUI/IMSlider.hpp b/src/slic3r/GUI/IMSlider.hpp
index 45e4d6ccb8..d28a65c1ff 100644
--- a/src/slic3r/GUI/IMSlider.hpp
+++ b/src/slic3r/GUI/IMSlider.hpp
@@ -216,7 +216,6 @@ private:
     long                m_extra_style;
     float               m_label_koef{1.0};
 
-    float                    m_zero_layer_height = 0.0f;
     std::vector<double>      m_values;
     TickCodeInfo             m_ticks;
     std::vector<double>      m_layers_times;
diff --git a/src/slic3r/GUI/ImageDPIFrame.hpp b/src/slic3r/GUI/ImageDPIFrame.hpp
index 817ef6be18..c22d296492 100644
--- a/src/slic3r/GUI/ImageDPIFrame.hpp
+++ b/src/slic3r/GUI/ImageDPIFrame.hpp
@@ -3,6 +3,8 @@
 
 #include "GUI_App.hpp"
 #include "GUI_Utils.hpp"
+#include <wx/stattext.h>
+#include <wx/timer.h>
 
 class wxStaticBitmap;
 namespace Slic3r { namespace GUI {
diff --git a/src/slic3r/GUI/ImageGrid.cpp b/src/slic3r/GUI/ImageGrid.cpp
index abef6f0f12..f6bf25d77c 100644
--- a/src/slic3r/GUI/ImageGrid.cpp
+++ b/src/slic3r/GUI/ImageGrid.cpp
@@ -521,7 +521,7 @@ void ImageGrid::render(wxDC& dc)
         if (!m_status_msg.IsEmpty()) {
             auto   si = m_status_icon.GetBmpSize();
             auto st   = dc.GetMultiLineTextExtent(m_status_msg);
-            auto   rect = wxRect{0, 0, max(st.x, si.x), si.y + 26 + st.y}.CenterIn(wxRect({0, 0}, size));
+            auto   rect = wxRect{0, 0, std::max(st.x, si.x), si.y + 26 + st.y}.CenterIn(wxRect({0, 0}, size));
             dc.DrawBitmap(m_status_icon.bmp(), rect.x + (rect.width - si.x) / 2, rect.y);
             dc.SetTextForeground(wxColor(0x909090));
             dc.DrawText(m_status_msg, rect.x + (rect.width - st.x) / 2, rect.GetBottom() - st.y);
diff --git a/src/slic3r/GUI/InstanceCheck.cpp b/src/slic3r/GUI/InstanceCheck.cpp
index bc68a3f788..28c5176cb1 100644
--- a/src/slic3r/GUI/InstanceCheck.cpp
+++ b/src/slic3r/GUI/InstanceCheck.cpp
@@ -114,7 +114,10 @@ namespace instance_check_internal
 		if (my_instance_hash == other_instance_hash) {
 			BOOST_LOG_TRIVIAL(debug) << "win enum - found correct instance";
 			orca_slicer_hwnd = hwnd;
-			ShowWindow(hwnd, SW_SHOWMAXIMIZED);
+			// Do not alter the window state when opening a file in the existing instance.
+			// A minimized window still needs restoring before it can receive focus.
+			if (IsIconic(hwnd))
+				ShowWindow(hwnd, SW_RESTORE);
 			SetForegroundWindow(hwnd);
 			return false;
 		}
diff --git a/src/slic3r/GUI/InstanceCheck.hpp b/src/slic3r/GUI/InstanceCheck.hpp
index 5f26f1e48f..9bfb3e2500 100644
--- a/src/slic3r/GUI/InstanceCheck.hpp
+++ b/src/slic3r/GUI/InstanceCheck.hpp
@@ -87,7 +87,6 @@ private:
 	std::condition_variable m_thread_stop_condition;
 	mutable std::mutex 		m_thread_stop_mutex;
 	bool 					m_stop{ false };
-	bool					m_start{ true };
 	
 	// background thread method
 	void    listen();
diff --git a/src/slic3r/GUI/Jobs/ArrangeJob.cpp b/src/slic3r/GUI/Jobs/ArrangeJob.cpp
index 6b74b71af1..c0cc7bdb5a 100644
--- a/src/slic3r/GUI/Jobs/ArrangeJob.cpp
+++ b/src/slic3r/GUI/Jobs/ArrangeJob.cpp
@@ -265,8 +265,7 @@ arrangement::ArrangePolygon estimate_wipe_tower_info(int plate_index, std::set<i
     int extruder_size = extruder_ids.size();
 
     Vec3d wipe_tower_size, wipe_tower_pos;
-    int nozzle_nums = wxGetApp().preset_bundle->get_printer_extruder_count();
-    auto arrange_poly = ppl.get_plate(plate_index_valid)->estimate_wipe_tower_polygon(full_config, plate_index, wipe_tower_pos, wipe_tower_size, nozzle_nums, extruder_size);
+    auto arrange_poly = ppl.get_plate(plate_index_valid)->estimate_wipe_tower_polygon(full_config, plate_index, wipe_tower_pos, wipe_tower_size, extruder_size);
     arrange_poly.bed_idx = plate_index;
     return arrange_poly;
 }
diff --git a/src/slic3r/GUI/Jobs/BindJob.cpp b/src/slic3r/GUI/Jobs/BindJob.cpp
index 61c430c6e6..76af712f63 100644
--- a/src/slic3r/GUI/Jobs/BindJob.cpp
+++ b/src/slic3r/GUI/Jobs/BindJob.cpp
@@ -3,6 +3,10 @@
 #include "slic3r/GUI/Plater.hpp"
 #include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/DeviceManager.hpp"
+#include "slic3r/GUI/HMS.hpp"
+#include "slic3r/GUI/I18N.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 
 #include "slic3r/GUI/DeviceCore/DevManager.h"
 
diff --git a/src/slic3r/GUI/Jobs/BindJob.hpp b/src/slic3r/GUI/Jobs/BindJob.hpp
index af89e2fc1b..1e8aa91d6f 100644
--- a/src/slic3r/GUI/Jobs/BindJob.hpp
+++ b/src/slic3r/GUI/Jobs/BindJob.hpp
@@ -20,7 +20,6 @@ class BindJob : public Job
     std::string         m_sec_link;
     std::string         m_ssdp_version;
     bool                m_job_finished{ false };
-    int                 m_print_job_completed_id = 0;
     bool                m_improved{false};
 
 public:
diff --git a/src/slic3r/GUI/Jobs/SendJob.cpp b/src/slic3r/GUI/Jobs/SendJob.cpp
index 67ce02b476..d27b18f24b 100644
--- a/src/slic3r/GUI/Jobs/SendJob.cpp
+++ b/src/slic3r/GUI/Jobs/SendJob.cpp
@@ -1,4 +1,6 @@
 #include "SendJob.hpp"
+#include "slic3r/GUI/I18N.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "libslic3r/MTUtils.hpp"
 #include "libslic3r/Model.hpp"
 #include "libslic3r/PresetBundle.hpp"
diff --git a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
index 6cd88ac5d3..7090f0e2e0 100644
--- a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
+++ b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
@@ -2,6 +2,7 @@
 
 #include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/I18N.hpp"
 #include "slic3r/Utils/Http.hpp"
 
 namespace Slic3r {
diff --git a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.hpp b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.hpp
index 5a531065f3..3e634e0337 100644
--- a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.hpp
+++ b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.hpp
@@ -27,7 +27,6 @@ class UpgradeNetworkJob : public Job
     wxWindow *           m_event_handle{nullptr};
     std::function<void()> m_success_fun{nullptr};
     bool                m_job_finished{ false };
-    int                 m_print_job_completed_id = 0;
 
     InstallProgressFn pro_fn { nullptr };
 
diff --git a/src/slic3r/GUI/KBShortcutsDialog.cpp b/src/slic3r/GUI/KBShortcutsDialog.cpp
index ed513c425f..2f882e35aa 100644
--- a/src/slic3r/GUI/KBShortcutsDialog.cpp
+++ b/src/slic3r/GUI/KBShortcutsDialog.cpp
@@ -174,6 +174,7 @@ void KBShortcutsDialog::fill_shortcuts()
             { ctrl + "O", L("Open Project") },
             { ctrl + "S", L("Save Project") },
             { ctrl + shift + "S", L("Save Project as")},
+            { ctrl + shift + "E", L("Publish 3MF") },
             // File>Import
             { ctrl + "I", L("Import geometry data from STL/STEP/3MF/OBJ/AMF files") },
             // File>Export
diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp
index e9791719ba..cc994b2370 100644
--- a/src/slic3r/GUI/MainFrame.cpp
+++ b/src/slic3r/GUI/MainFrame.cpp
@@ -43,7 +43,6 @@
 #endif
 #include "WebViewDialog.hpp"
 #include "../Utils/Process.hpp"
-#include "format.hpp"
 // BBS
 #include "PartPlate.hpp"
 #include "Preferences.hpp"
@@ -53,11 +52,9 @@
 #include "../Utils/NetworkAgentFactory.hpp"
 #include "../Utils/PrintHost.hpp"
 
-#include <fstream>
-#include <string_view>
-
 #include "GUI_App.hpp"
 #include "UnsavedChangesDialog.hpp"
+#include "PublishSettingsDialog.hpp"
 #include "MsgDialog.hpp"
 #include "Notebook.hpp"
 #include "GUI_Factories.hpp"
@@ -747,6 +744,10 @@ DPIFrame(NULL, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, BORDERLESS_FRAME_
             if (m_plater) { m_plater->add_file(); }
             return;
         }
+        if (evt.CmdDown() && evt.ShiftDown() && evt.GetKeyCode() == 'E') {
+            if (can_export_model()) publish_project();
+            return;
+        }
         evt.Skip();
     });
 
@@ -1646,7 +1647,7 @@ void MainFrame::register_win32_callbacks()
     //static GUID GUID_DEVINTERFACE_USB_DEVICE  = { 0xA5DCBF10, 0x6530, 0x11D2, 0x90, 0x1F, 0x00, 0xC0, 0x4F, 0xB9, 0x51, 0xED };
     //static GUID GUID_DEVINTERFACE_DISK        = { 0x53f56307, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b };
     //static GUID GUID_DEVINTERFACE_VOLUME      = { 0x71a27cdd, 0x812a, 0x11d0, 0xbe, 0xc7, 0x08, 0x00, 0x2b, 0xe2, 0x09, 0x2f };
-    static GUID GUID_DEVINTERFACE_HID           = { 0x4D1E55B2, 0xF16F, 0x11CF, 0x88, 0xCB, 0x00, 0x11, 0x11, 0x00, 0x00, 0x30 };
+    static GUID GUID_DEVINTERFACE_HID           = { 0x4D1E55B2, 0xF16F, 0x11CF, { 0x88, 0xCB, 0x00, 0x11, 0x11, 0x00, 0x00, 0x30 } };
 
     // Register USB HID (Human Interface Devices) notifications to trigger the 3DConnexion enumeration.
     DEV_BROADCAST_DEVICEINTERFACE NotificationFilter = { 0 };
@@ -1686,7 +1687,7 @@ void MainFrame::register_win32_callbacks()
 
     {
         static constexpr int device_count = 1;
-        RAWINPUTDEVICE devices[device_count] = { 0 };
+        RAWINPUTDEVICE devices[device_count] = {};
         // multi-axis mouse (SpaceNavigator, etc.)
         devices[0].usUsagePage = 0x01;
         devices[0].usUsage = 0x08;
@@ -1795,6 +1796,22 @@ bool MainFrame::save_project_as(const wxString& filename)
     return ret;
 }
 
+void MainFrame::publish_project()
+{
+    if (m_plater == nullptr)
+        return;
+    // Seed the dialog from the session selection (a remembered state or a freshly loaded
+    // published 3MF); a null pointer means "fresh", keeping the dirty defaults.
+    std::vector<std::string> pending_keys;
+    std::vector<Slic3r::PublishedMaterialEntry> pending_material;
+    const bool has_prior = m_plater->get_pending_published(pending_keys, pending_material);
+    PublishSettingsDialog dlg(this, has_prior ? &pending_keys : nullptr, has_prior ? &pending_material : nullptr);
+    if (dlg.ShowModal() != wxID_OK)
+        return;
+    m_plater->set_pending_published(dlg.GetPublishedKeys(), dlg.GetPublishedMaterialKeys());
+    m_plater->export_published_3mf(dlg.GetPublishedKeys(), dlg.GetPublishedMaterialKeys());
+}
+
 bool MainFrame::can_upload() const
 {
     return true;
@@ -2890,6 +2907,20 @@ void MainFrame::init_menubar_as_editor()
             [this](){return m_plater != nullptr && can_save_as(); }, this);
 #endif
 
+        // BBS: publish
+        fileMenu->AppendSeparator();
+        auto publish_handler = [this](wxCommandEvent&) { publish_project(); };
+
+#ifndef __APPLE__
+        append_menu_item(fileMenu, wxID_ANY, _L("Publish 3MF") + dots + "\t" + ctrl + shift + "E", _L("Export a 3MF file with the selected settings embedded"),
+            publish_handler, "menu_publish", nullptr,
+            [this](){return can_export_model(); }, this);
+#else
+        append_menu_item(fileMenu, wxID_ANY, _L("Publish 3MF") + dots + "\t" + ctrl + shift + "E", _L("Export a 3MF file with the selected settings embedded"),
+            publish_handler, "", nullptr,
+            [this](){return can_export_model(); }, this);
+#endif
+
 
         fileMenu->AppendSeparator();
 
@@ -3300,98 +3331,9 @@ void MainFrame::init_menubar_as_editor()
     auto preference_item = new wxMenuItem(parent_menu, ConfigMenuPreferences + config_id_base, _L("Preferences") + "\t" + ctrl + "P", "");
 
 #endif
-    //auto printer_item = new wxMenuItem(parent_menu, ConfigMenuPrinter + config_id_base, _L("Printer"), "");
-    //auto language_item = new wxMenuItem(parent_menu, ConfigMenuLanguage + config_id_base, _L("Switch Language"), "");
-//    parent_menu->Bind(wxEVT_MENU, [this, config_id_base](wxEvent& event) {
-//        switch (event.GetId() - config_id_base) {
-//        //case ConfigMenuLanguage:
-//        //{
-//        //    /* Before change application language, let's check unsaved changes on 3D-Scene
-//        //     * and draw user's attention to the application restarting after a language change
-//        //     */
-//        //    {
-//        //        // the dialog needs to be destroyed before the call to switch_language()
-//        //        // or sometimes the application crashes into wxDialogBase() destructor
-//        //        // so we put it into an inner scope
-//        //        wxString title = _L("Language selection");
-//        //        wxMessageDialog dialog(nullptr,
-//        //            _L("Switching the language requires application restart.\n") + "\n\n" +
-//        //            _L("Do you want to continue?"),
-//        //            title,
-//        //            wxICON_QUESTION | wxOK | wxCANCEL);
-//        //        if (dialog.ShowModal() == wxID_CANCEL)
-//        //            return;
-//        //    }
-//
-//        //    wxGetApp().switch_language();
-//        //    break;
-//        //}
-//        //case ConfigMenuWizard:
-//        //{
-//        //    wxGetApp().run_wizard(ConfigWizard::RR_USER);
-//        //    break;
-//        //}
-//        case ConfigMenuPrinter:
-//        {
-//            wxGetApp().params_dialog()->Popup();
-//            wxGetApp().get_tab(Preset::TYPE_PRINTER)->restore_last_select_item();
-//            break;
-//        }
-//        case ConfigMenuPreferences:
-//        {
-//            CallAfter([this] {
-//                PreferencesDialog dlg(this);
-//                dlg.ShowModal();
-//#if ENABLE_GCODE_LINES_ID_IN_H_SLIDER
-//                if (dlg.seq_top_layer_only_changed() || dlg.seq_seq_top_gcode_indices_changed())
-//#else
-//                if (dlg.seq_top_layer_only_changed())
-//#endif // ENABLE_GCODE_LINES_ID_IN_H_SLIDER
-//                    plater()->refresh_print();
-//#if ENABLE_CUSTOMIZABLE_FILES_ASSOCIATION_ON_WIN
-//#ifdef _WIN32
-//                /*
-//                if (wxGetApp().app_config()->get("associate_3mf") == "true")
-//                    wxGetApp().associate_3mf_files();
-//                if (wxGetApp().app_config()->get("associate_stl") == "true")
-//                    wxGetApp().associate_stl_files();
-//                /*if (wxGetApp().app_config()->get("associate_step") == "true")
-//                    wxGetApp().associate_step_files();*/
-//#endif // _WIN32
-//#endif
-//            });
-//            break;
-//        }
-//        default:
-//            break;
-//        }
-//    });
 
 #ifdef __APPLE__
     wxString about_title = wxString::Format(_L("&About %s"), SLIC3R_APP_FULL_NAME);
-    //auto about_item = new wxMenuItem(parent_menu, OrcaSlicerMenuAbout + bambu_studio_id_base, about_title, "");
-        //parent_menu->Bind(wxEVT_MENU, [this, bambu_studio_id_base](wxEvent& event) {
-        //    switch (event.GetId() - bambu_studio_id_base) {
-        //        case OrcaSlicerMenuAbout:
-        //            Slic3r::GUI::about();
-        //            break;
-        //        case OrcaSlicerMenuPreferences:
-        //            CallAfter([this] {
-        //                PreferencesDialog dlg(this);
-        //                dlg.ShowModal();
-        //#if ENABLE_GCODE_LINES_ID_IN_H_SLIDER
-        //                if (dlg.seq_top_layer_only_changed() || dlg.seq_seq_top_gcode_indices_changed())
-        //#else
-        //                if (dlg.seq_top_layer_only_changed())
-        //#endif // ENABLE_GCODE_LINES_ID_IN_H_SLIDER
-        //                    plater()->refresh_print();
-        //            });
-        //            break;
-        //        default:
-        //            break;
-        //    }
-        //});
-    //parent_menu->Insert(0, about_item);
     append_menu_item(
         parent_menu, wxID_ANY, _L(about_title), "",
         [](wxCommandEvent &) { Slic3r::GUI::about();},
@@ -4268,15 +4210,23 @@ std::wstring MainFrame::FileHistory::GetThumbnailUrl(int index) const
     return wss.str();
 }
 
+bool MainFrame::FileHistory::GetPublished(int index) const
+{
+    return index >= 0 && index < static_cast<int>(m_published_files.size()) && m_published_files[index];
+}
+
 void MainFrame::FileHistory::AddFileToHistory(const wxString &file)
 {
     if (this->m_fileMaxFiles == 0)
         return;
     wxFileHistory::AddFileToHistory(file);
-    if (m_load_called)
+    if (m_load_called) {
         m_thumbnails.push_front(bbs_3mf_get_thumbnail(into_u8(file).c_str()));
-    else
+        m_published_files.push_front(bbs_3mf_is_published(into_u8(file)));
+    } else {
         m_thumbnails.push_front("");
+        m_published_files.push_front(false);
+    }
 }
 
 void MainFrame::FileHistory::RemoveFileFromHistory(size_t i)
@@ -4285,6 +4235,7 @@ void MainFrame::FileHistory::RemoveFileFromHistory(size_t i)
         return;
     wxFileHistory::RemoveFileFromHistory(i);
     m_thumbnails.erase(m_thumbnails.begin() + i);
+    m_published_files.erase(m_published_files.begin() + i);
 }
 
 size_t MainFrame::FileHistory::FindFileInHistory(const wxString & file)
@@ -4300,6 +4251,7 @@ void MainFrame::FileHistory::LoadThumbnails()
             if (!thumbnail.empty()) {
                 m_thumbnails[i] = thumbnail;
             }
+            m_published_files[i] = bbs_3mf_is_published(into_u8(GetHistoryFile(i)));
         }
     });
     m_load_called = true;
@@ -4320,6 +4272,7 @@ void MainFrame::get_recent_projects(boost::property_tree::wptree &tree, int imag
         std::wstring proj = m_recent_projects.GetHistoryFile(i).ToStdWstring();
         item.put(L"project_name", proj.substr(proj.find_last_of(L"/\\") + 1));
         item.put(L"path", proj);
+        item.put(L"published", m_recent_projects.GetPublished(i) ? L"1" : L"0");
         boost::system::error_code ec;
         std::time_t t = boost::filesystem::last_write_time(proj, ec);
         if (!ec) {
@@ -4544,10 +4497,9 @@ std::string MainFrame::get_dir_name(const wxString &full_name) const
 // ----------------------------------------------------------------------------
 
 SettingsDialog::SettingsDialog(MainFrame* mainframe)
-:DPIDialog(NULL, wxID_ANY, wxString(SLIC3R_APP_NAME) + " - " + _L("Settings"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, "settings_dialog"),
+:DPIDialog(NULL, wxID_ANY, wxString(SLIC3R_APP_NAME) + " - " + _L("Settings"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, "settings_dialog")
 //: DPIDialog(mainframe, wxID_ANY, wxString(SLIC3R_APP_NAME) + " - " + _L("Settings"), wxDefaultPosition, wxDefaultSize,
 //        wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER | wxMINIMIZE_BOX | wxMAXIMIZE_BOX, "settings_dialog"),
-    m_main_frame(mainframe)
 {
     if (wxGetApp().is_gcode_viewer())
         return;
diff --git a/src/slic3r/GUI/MainFrame.hpp b/src/slic3r/GUI/MainFrame.hpp
index b647acfadd..bbdd8a4694 100644
--- a/src/slic3r/GUI/MainFrame.hpp
+++ b/src/slic3r/GUI/MainFrame.hpp
@@ -72,6 +72,7 @@ class Plater;
 class DesignPanel;
 #endif
 class MainFrame;
+class WebViewPanel;
 class ParamsDialog;
 #ifdef __WXGTK__
 class ResizeEdgePanel;
@@ -100,7 +101,6 @@ class SettingsDialog : public DPIDialog//DPIDialog
 {
     //wxNotebook* m_tabpanel { nullptr };
     Notebook* m_tabpanel{ nullptr };
-    MainFrame*      m_main_frame { nullptr };
     wxMenuBar*      m_menubar{ nullptr };
 public:
     SettingsDialog(MainFrame* mainframe);
@@ -185,6 +185,7 @@ class MainFrame : public DPIFrame
     {
         FileHistory(int max) : wxFileHistory(max) {}
         std::wstring GetThumbnailUrl(int index) const;
+        bool        GetPublished(int index) const;
 
         virtual void AddFileToHistory(const wxString &file);
         virtual void RemoveFileFromHistory(size_t i);
@@ -195,6 +196,7 @@ class MainFrame : public DPIFrame
         void SetMaxFiles(int max);
     private:
         std::deque<std::string> m_thumbnails;
+        std::deque<bool>        m_published_files; // parallel to m_thumbnails: is it a published 3mf?
         bool m_load_called = false;
     };
 
@@ -348,6 +350,8 @@ public:
     bool can_upload() const;
     void save_project();
     bool save_project_as(const wxString& filename = wxString());
+    // Open the Publish dialog and export the selected settings as a published 3MF.
+    void publish_project();
 
     void        add_to_recent_projects(const wxString& filename);
     void        get_recent_projects(boost::property_tree::wptree &tree, int images);
diff --git a/src/slic3r/GUI/MediaFilePanel.cpp b/src/slic3r/GUI/MediaFilePanel.cpp
index 36316f8ff5..e9e1f56b03 100644
--- a/src/slic3r/GUI/MediaFilePanel.cpp
+++ b/src/slic3r/GUI/MediaFilePanel.cpp
@@ -2,6 +2,9 @@
 #include "ImageGrid.h"
 #include "I18N.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
+#include "DeviceManager.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "Plater.hpp"
 #include "Widgets/Button.hpp"
 #include "Widgets/SwitchButton.hpp"
diff --git a/src/slic3r/GUI/MediaPlayCtrl.cpp b/src/slic3r/GUI/MediaPlayCtrl.cpp
index 0d75c3770d..557d859cf7 100644
--- a/src/slic3r/GUI/MediaPlayCtrl.cpp
+++ b/src/slic3r/GUI/MediaPlayCtrl.cpp
@@ -3,6 +3,11 @@
 #include "Widgets/CheckBox.hpp"
 #include "Widgets/Label.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
+#include "DeviceManager.hpp"
+#include "DeviceCore/DevConfigUtil.h"
+#include "slic3r/Utils/NetworkAgent.hpp"
+#include "libslic3r/Thread.hpp"
 #include "libslic3r/AppConfig.hpp"
 #include "I18N.hpp"
 #include "MsgDialog.hpp"
@@ -13,6 +18,7 @@
 #include <boost/lexical_cast.hpp>
 #include <boost/log/trivial.hpp>
 #include <boost/nowide/cstdio.hpp>
+#include <boost/nowide/fstream.hpp>
 #include <boost/nowide/utf8_codecvt.hpp>
 #undef pid_t
 #include <boost/process.hpp>
@@ -71,7 +77,7 @@ MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl3 *media_ctrl, const w
                 auto ip = str.find(' ', ik);
                 if (ip == wxString::npos) ip = str.Length();
                 auto v = str.Mid(ik, ip - ik);
-                if (k == "T:" && v.Length() == 8) {
+                if (strcmp(k, "T:") == 0 && v.Length() == 8) {
                     long h = 0,m = 0,s = 0;
                     v.Left(2).ToLong(&h);
                     v.Mid(3, 2).ToLong(&m);
diff --git a/src/slic3r/GUI/MeshUtils.cpp b/src/slic3r/GUI/MeshUtils.cpp
index bc6c60a360..173c5d2f13 100644
--- a/src/slic3r/GUI/MeshUtils.cpp
+++ b/src/slic3r/GUI/MeshUtils.cpp
@@ -297,7 +297,7 @@ void MeshClipper::recalculate_triangles()
             // it so it lies on our line. This will be the figure to subtract
             // from the cut. The coordinates must not overflow after the transform,
             // make the rectangle a bit smaller.
-            const coord_t size = (std::numeric_limits<coord_t>::max()/2 - scale_(std::max(std::abs(e * a), std::abs(e * b)))) / 4;
+            const coord_t size = (double(std::numeric_limits<coord_t>::max()/2) - scale_(std::max(std::abs(e * a), std::abs(e * b)))) / 4;
             Polygons ep {Polygon({Point(-size, 0), Point(size, 0), Point(size, 2*size), Point(-size, 2*size)})};
             ep.front().rotate(angle);
             ep.front().translate(scale_(-e * a), scale_(-e * b));
@@ -352,7 +352,7 @@ void MeshClipper::recalculate_triangles()
 
             // To prevent overflow after scaling, downscale the input if needed:
             double extra_scale = 1.;
-            coord_t limit = coord_t(std::min(std::numeric_limits<coord_t>::max() / (2. * std::max(1., scale_x)), std::numeric_limits<coord_t>::max() / (2. * std::max(1., scale_y))));
+            coord_t limit = coord_t(std::min(double(std::numeric_limits<coord_t>::max()) / (2. * std::max(1., scale_x)), double(std::numeric_limits<coord_t>::max()) / (2. * std::max(1., scale_y))));
             coord_t max_coord = 0;
             for (const Point& pt : exp.contour)
                 max_coord = std::max(max_coord, std::max(std::abs(pt.x()), std::abs(pt.y())));
diff --git a/src/slic3r/GUI/MixedFilamentDialog.cpp b/src/slic3r/GUI/MixedFilamentDialog.cpp
index 902c12d27b..8176a76202 100644
--- a/src/slic3r/GUI/MixedFilamentDialog.cpp
+++ b/src/slic3r/GUI/MixedFilamentDialog.cpp
@@ -126,7 +126,6 @@ MixedFilamentDialog::MixedFilamentDialog(wxWindow* parent,
                                          const std::vector<std::string>& physical_types)
     : DPIDialog(parent, wxID_ANY, _L("Add Mixed Filament"), wxDefaultPosition,
                 wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
-    , m_edit_mode(false)
     , m_physical_colors(physical_colors)
     , m_physical_names(physical_names)
     , m_physical_types(physical_types)
@@ -157,7 +156,6 @@ MixedFilamentDialog::MixedFilamentDialog(wxWindow* parent,
     : DPIDialog(parent, wxID_ANY, _L("Edit Mixed Filament"), wxDefaultPosition,
                 wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
     , m_result(existing)
-    , m_edit_mode(true)
     , m_physical_colors(physical_colors)
     , m_physical_names(physical_names)
     , m_physical_types(physical_types)
@@ -847,23 +845,8 @@ wxBoxSizer* MixedFilamentDialog::create_ratio_slider()
     m_ratio_bar->Bind(wxEVT_PAINT, [this](wxPaintEvent&) {
         wxBufferedPaintDC dc(m_ratio_bar);
         wxSize sz = m_ratio_bar->GetClientSize();
-
-        wxColour col_a = comp_colour(0), col_b = comp_colour(1);
-
-        for (int x = 0; x < sz.GetWidth(); ++x) {
-            double t = (double)x / sz.GetWidth();
-            wxColour c = blend_colors(col_a, col_b, 1.0 - t);
-            dc.SetPen(wxPen(c));
-            dc.DrawLine(x, 0, x, sz.GetHeight());
-        }
-
-        int div_x = (int)(ratio(1) / 100.0 * sz.GetWidth());
-        // Fixed in both themes, like the triangle picker's drag handle: the divider is drawn over
-        // blended filament colour, so it has to keep its contrast against data rather than chrome.
-        dc.SetPen(wxPen(wxColour(80, 80, 80), FromDIP(4)));
-        dc.DrawLine(div_x, 0, div_x, sz.GetHeight());
-        dc.SetPen(wxPen(*wxWHITE, FromDIP(2)));
-        dc.DrawLine(div_x, 0, div_x, sz.GetHeight());
+        draw_mixed_ratio_blend_bar(dc, wxRect(0, 0, sz.GetWidth(), sz.GetHeight()),
+                                   comp_colour(0), comp_colour(1), ratio(1) / 100.0);
     });
 
     m_ratio_bar->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent& e) {
@@ -919,52 +902,8 @@ wxBoxSizer* MixedFilamentDialog::create_ratio_slider()
 }
 
 // ---- Triangle (ternary) ratio picker ----
-
-// Barycentric coordinate utilities
-struct TriPoint { double x, y; };
-
-static double tri_signed_area2(TriPoint a, TriPoint b, TriPoint c)
-{
-    return (b.x - a.x) * (c.y - a.y) - (c.x - a.x) * (b.y - a.y);
-}
-
-static bool tri_contains(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2)
-{
-    double total = tri_signed_area2(v0, v1, v2);
-    if (std::abs(total) < 1e-9) return false;
-    double s0 = tri_signed_area2(p, v1, v2) / total;
-    double s1 = tri_signed_area2(v0, p, v2) / total;
-    double s2 = 1.0 - s0 - s1;
-    return s0 >= -0.001 && s1 >= -0.001 && s2 >= -0.001;
-}
-
-static void tri_barycentric(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2,
-                            double& w0, double& w1, double& w2)
-{
-    double total = std::abs(tri_signed_area2(v0, v1, v2));
-    if (total < 1e-9) { w0 = w1 = w2 = 1.0 / 3.0; return; }
-    w0 = std::abs(tri_signed_area2(p, v1, v2)) / total;
-    w1 = std::abs(tri_signed_area2(v0, p, v2)) / total;
-    w2 = 1.0 - w0 - w1;
-    w0 = std::clamp(w0, 0.0, 1.0);
-    w1 = std::clamp(w1, 0.0, 1.0);
-    w2 = std::clamp(w2, 0.0, 1.0);
-    double s = w0 + w1 + w2;
-    if (s > 0) { w0 /= s; w1 /= s; w2 /= s; }
-}
-
-static TriPoint tri_clamp(TriPoint p, TriPoint v0, TriPoint v1, TriPoint v2)
-{
-    double w0, w1, w2;
-    tri_barycentric(p, v0, v1, v2, w0, w1, w2);
-    w0 = std::clamp(w0, 0.0, 1.0);
-    w1 = std::clamp(w1, 0.0, 1.0);
-    w2 = std::clamp(w2, 0.0, 1.0);
-    double s = w0 + w1 + w2;
-    if (s > 0) { w0 /= s; w1 /= s; w2 /= s; }
-    return {w0 * v0.x + w1 * v1.x + w2 * v2.x,
-            w0 * v0.y + w1 * v1.y + w2 * v2.y};
-}
+// The barycentric utilities (TriPoint, tri_contains, tri_barycentric, tri_clamp) live in
+// FilamentBitmapUtils so the Publish dialog can mirror this picker read-only.
 
 wxBoxSizer* MixedFilamentDialog::create_triangle_picker()
 {
@@ -998,72 +937,15 @@ wxBoxSizer* MixedFilamentDialog::create_triangle_picker()
         wxSize sz = m_triangle_panel->GetClientSize();
         auto [v0, v1, v2] = get_vertices();
 
-        wxColour tri_bg = StateColor::darkModeColorFor(*wxWHITE);
-        dc.SetBrush(wxBrush(tri_bg));
-        dc.SetPen(*wxTRANSPARENT_PEN);
-        dc.DrawRectangle(0, 0, sz.GetWidth(), sz.GetHeight());
-
-        wxColour c0 = comp_colour(0), c1 = comp_colour(1), c2 = comp_colour(2);
-
-        const bool cache_valid = m_tri_cache_bmp.IsOk() &&
-            m_tri_cache_size == sz &&
-            m_tri_cache_c0 == c0 && m_tri_cache_c1 == c1 && m_tri_cache_c2 == c2;
-
-        if (!cache_valid) {
-            int min_y = (int)std::min({v0.y, v1.y, v2.y});
-            int max_y = (int)std::max({v0.y, v1.y, v2.y});
-            int min_x = (int)std::min({v0.x, v1.x, v2.x});
-            int max_x = (int)std::max({v0.x, v1.x, v2.x});
-
-            m_tri_cache_bmp = wxBitmap(sz.GetWidth(), sz.GetHeight(), 24);
-            wxMemoryDC mdc(m_tri_cache_bmp);
-            mdc.SetBrush(wxBrush(tri_bg));
-            mdc.SetPen(*wxTRANSPARENT_PEN);
-            mdc.DrawRectangle(0, 0, sz.GetWidth(), sz.GetHeight());
-
-            for (int py = min_y; py <= max_y; ++py) {
-                for (int px = min_x; px <= max_x; ++px) {
-                    TriPoint p = {(double)px, (double)py};
-                    if (!tri_contains(p, v0, v1, v2)) continue;
-                    double w0, w1, w2;
-                    tri_barycentric(p, v0, v1, v2, w0, w1, w2);
-                    unsigned char mr, mg, mb;
-                    if (w0 + w1 > 1e-6) {
-                        float t01 = static_cast<float>(w1 / (w0 + w1));
-                        Slic3r::filament_mixer_lerp(c0.Red(), c0.Green(), c0.Blue(),
-                                                    c1.Red(), c1.Green(), c1.Blue(),
-                                                    t01, &mr, &mg, &mb);
-                        float t2 = static_cast<float>(w2);
-                        Slic3r::filament_mixer_lerp(mr, mg, mb,
-                                                    c2.Red(), c2.Green(), c2.Blue(),
-                                                    t2, &mr, &mg, &mb);
-                    } else {
-                        mr = c2.Red(); mg = c2.Green(); mb = c2.Blue();
-                    }
-                    mdc.SetPen(wxPen(wxColour(mr, mg, mb)));
-                    mdc.DrawPoint(px, py);
-                }
-            }
-
-            mdc.SetPen(wxPen(StateColor::darkModeColorFor(wxColour("#CECECE")), 1));
-            mdc.SetBrush(*wxTRANSPARENT_BRUSH);
-            wxPoint pts[3] = {{(int)v0.x, (int)v0.y}, {(int)v1.x, (int)v1.y}, {(int)v2.x, (int)v2.y}};
-            mdc.DrawPolygon(3, pts);
-
-            mdc.SelectObject(wxNullBitmap);
-            m_tri_cache_c0 = c0; m_tri_cache_c1 = c1; m_tri_cache_c2 = c2;
-            m_tri_cache_size = sz;
-        }
-
-        dc.DrawBitmap(m_tri_cache_bmp, 0, 0);
-
-        // Drag handle (always redrawn on top of cached bitmap)
-        double hx = m_tri_wx * v0.x + m_tri_wy * v1.x + m_tri_wz * v2.x;
-        double hy = m_tri_wx * v0.y + m_tri_wy * v1.y + m_tri_wz * v2.y;
-        int handle_r = FromDIP(5);
-        dc.SetBrush(*wxWHITE_BRUSH);
-        dc.SetPen(wxPen(wxColour("#262E30"), FromDIP(2)));
-        dc.DrawCircle((int)hx, (int)hy, handle_r);
+        // Draw the background, cached barycentric fill, outline and drag-handle marker through the
+        // shared picker painter (same geometry the read-only Publish preview uses).
+        draw_mixed_triangle_picker(dc, sz,
+                                   {comp_colour(0), comp_colour(1), comp_colour(2)},
+                                   {m_tri_wx, m_tri_wy, m_tri_wz},
+                                   {StateColor::darkModeColorFor(*wxWHITE),
+                                    StateColor::darkModeColorFor(wxColour("#CECECE")),
+                                    StateColor::darkModeColorFor(wxColour("#262E30")),
+                                    StateColor::darkModeColorFor(COLOR_LABEL_MUTED)});
 
         if (m_result.ratios.size() >= 3) {
             dc.SetFont(::Label::Body_10);
diff --git a/src/slic3r/GUI/MixedFilamentDialog.hpp b/src/slic3r/GUI/MixedFilamentDialog.hpp
index ea8ac5ad16..381896494e 100644
--- a/src/slic3r/GUI/MixedFilamentDialog.hpp
+++ b/src/slic3r/GUI/MixedFilamentDialog.hpp
@@ -115,7 +115,6 @@ private:
     wxColour        comp_colour(size_t i) const;
 
     MixedFilamentResult         m_result;
-    bool                        m_edit_mode{false};
     std::vector<std::string>    m_physical_colors;
     std::vector<std::string>    m_physical_names;
     std::vector<std::string>    m_physical_types;
@@ -170,10 +169,6 @@ private:
     // Triangle picker drag point (barycentric weights)
     double m_tri_wx{0.333}, m_tri_wy{0.333}, m_tri_wz{0.334};
 
-    // Cached triangle color bitmap (invalidated when colors or size change)
-    wxBitmap m_tri_cache_bmp;
-    wxColour m_tri_cache_c0, m_tri_cache_c1, m_tri_cache_c2;
-    wxSize   m_tri_cache_size;
     std::array<RatioLabelPanel*, 3> m_triangle_ratio_labels{nullptr, nullptr, nullptr};
 };
 
diff --git a/src/slic3r/GUI/Monitor.hpp b/src/slic3r/GUI/Monitor.hpp
index 13688d6526..9252b04559 100644
--- a/src/slic3r/GUI/Monitor.hpp
+++ b/src/slic3r/GUI/Monitor.hpp
@@ -78,7 +78,6 @@ private:
     Tabbook*		m_tabpanel{ nullptr };
     wxSizer*        m_main_sizer{ nullptr };
 
-    AddMachinePanel*    m_status_add_machine_panel;
     StatusPanel*        m_status_info_panel;
     MediaFilePanel*     m_media_file_panel;
     UpgradePanel*       m_upgrade_panel;
@@ -86,8 +85,6 @@ private:
 
 	/* side tools */
     SideTools*      m_side_tools{nullptr};
-    wxStaticBitmap* m_bitmap_arrow;
-    wxStaticBitmap* m_bitmap_wifi_signal;
     SelectMachinePopup m_select_machine;
 
 	/* images */
diff --git a/src/slic3r/GUI/Mouse3DController.cpp b/src/slic3r/GUI/Mouse3DController.cpp
index 11709501ac..0317342412 100644
--- a/src/slic3r/GUI/Mouse3DController.cpp
+++ b/src/slic3r/GUI/Mouse3DController.cpp
@@ -1,6 +1,7 @@
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/PresetBundle.hpp"
 #include "Mouse3DController.hpp"
+#include "GUI.hpp"
 
 #include "Camera.hpp"
 #include "GUI_App.hpp"
@@ -498,7 +499,7 @@ void Mouse3DController::render_settings_dialog(GLCanvas3D& canvas) const
     ImGui::PushStyleVar(ImGuiStyleVar_WindowPadding, ImVec2(20.0f, 20.0f));
     static ImVec2 last_win_size(0.0f, 0.0f);
     bool shown = true;
-    if (imgui.begin(_L("3Dconnexion settings"), &shown, ImGuiWindowFlags_AlwaysAutoResize | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoCollapse || ImGuiWindowFlags_NoTitleBar)) {
+    if (imgui.begin(_L("3Dconnexion settings"), &shown, ImGuiWindowFlags_AlwaysAutoResize | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoCollapse | ImGuiWindowFlags_NoTitleBar)) {
         if (shown) {
             ImVec2 win_size = ImGui::GetWindowSize();
             if (last_win_size.x != win_size.x || last_win_size.y != win_size.y) {
diff --git a/src/slic3r/GUI/MsgDialog.hpp b/src/slic3r/GUI/MsgDialog.hpp
index 90fd160310..ed8079d88c 100644
--- a/src/slic3r/GUI/MsgDialog.hpp
+++ b/src/slic3r/GUI/MsgDialog.hpp
@@ -177,7 +177,6 @@ public:
 // Generic rich message dialog, used intead of wxRichMessageDialog
 class RichMessageDialog : public MsgDialog
 {
-	wxCheckBox* m_checkBox{ nullptr };
 	wxString	m_checkBoxText;
 	bool		m_checkBoxValue{ false };
 
@@ -416,7 +415,6 @@ private:
     wxString      m_new_keys;
     Button *      m_update_btn = nullptr;
     Button *      m_later_btn  = nullptr;
-    wxStaticText *m_msg_text   = nullptr;
 };
 
 
diff --git a/src/slic3r/GUI/MultiMachineManagerPage.hpp b/src/slic3r/GUI/MultiMachineManagerPage.hpp
index 2576e36f12..9b5655a9ee 100644
--- a/src/slic3r/GUI/MultiMachineManagerPage.hpp
+++ b/src/slic3r/GUI/MultiMachineManagerPage.hpp
@@ -79,7 +79,6 @@ private:
     wxBoxSizer*             m_main_sizer{nullptr};
     wxBoxSizer*             m_sizer_machine_list{nullptr};
     wxScrolledWindow*       m_machine_list{ nullptr };
-    wxStaticText*           m_selected_num{ nullptr };
 
     // table head
     wxPanel*                m_table_head_panel{ nullptr };
@@ -99,8 +98,6 @@ private:
     int                         m_total_count{ 0 };
     int                         m_count_page_item{ 10 };
 
-    bool                        prev{ false };
-    bool                        next{ false };
     Button*                     btn_last_page{ nullptr };
     Button*                     btn_next_page{ nullptr };
     wxStaticText*               st_page_number{ nullptr };
diff --git a/src/slic3r/GUI/MultiMachinePage.hpp b/src/slic3r/GUI/MultiMachinePage.hpp
index 0572c30d1b..724eeed2a9 100644
--- a/src/slic3r/GUI/MultiMachinePage.hpp
+++ b/src/slic3r/GUI/MultiMachinePage.hpp
@@ -81,7 +81,6 @@ private:
     AppConfig*          app_config;
     Label*              m_label{ nullptr };
     wxScrolledWindow*     scroll_macine_list{ nullptr };
-    wxBoxSizer*         m_sizer_body{ nullptr };
     wxBoxSizer*                         sizer_machine_list{ nullptr };
     std::map<std::string, DevicePickItem*>  m_device_items;
     int                 m_selected_count{0};
diff --git a/src/slic3r/GUI/MultiTaskManagerPage.hpp b/src/slic3r/GUI/MultiTaskManagerPage.hpp
index 0f676d06b3..f1b35ca2aa 100644
--- a/src/slic3r/GUI/MultiTaskManagerPage.hpp
+++ b/src/slic3r/GUI/MultiTaskManagerPage.hpp
@@ -99,7 +99,6 @@ private:
     wxBoxSizer* page_sizer{ nullptr };
     wxBoxSizer* m_sizer_task_list{ nullptr };
     wxScrolledWindow* m_task_list{ nullptr };
-    wxStaticText* m_selected_num{ nullptr };
 
     // table head
     wxPanel* m_table_head_panel{ nullptr };
@@ -113,7 +112,6 @@ private:
     Button* m_action{ nullptr };
 
     // ctrl button for all
-    int m_sel_number{0};
     wxPanel* m_ctrl_btn_panel{ nullptr };
     wxBoxSizer* m_btn_sizer{ nullptr };
     Button* btn_stop_all{ nullptr };
@@ -160,15 +158,12 @@ private:
     wxBoxSizer* m_sizer_task_list{ nullptr };
     wxBoxSizer* m_main_sizer{ nullptr };
     wxScrolledWindow* m_task_list{ nullptr };
-    wxStaticText* m_selected_num{ nullptr };
 
     // Flipping pages
     int                         m_current_page{ 0 };
     int                         m_total_page{0};
     int                         m_total_count{ 0 };
     int                         m_count_page_item{ 10 };
-    bool                        prev{ false };
-    bool                        next{ false };
     Button*                     btn_last_page{ nullptr };
     Button*                     btn_next_page{ nullptr };
     wxStaticText*               st_page_number{ nullptr };
@@ -191,7 +186,6 @@ private:
     Button*                     m_action{ nullptr };
 
     // ctrl button for all
-    int                         m_sel_number;
     wxPanel*                    m_ctrl_btn_panel{ nullptr };
     wxBoxSizer*                 m_btn_sizer{ nullptr };
     Button*                     btn_pause_all{ nullptr };
diff --git a/src/slic3r/GUI/NotificationManager.cpp b/src/slic3r/GUI/NotificationManager.cpp
index 5e83ad845f..2ee875901c 100644
--- a/src/slic3r/GUI/NotificationManager.cpp
+++ b/src/slic3r/GUI/NotificationManager.cpp
@@ -3083,7 +3083,7 @@ bool NotificationManager::push_notification_data(std::unique_ptr<NotificationMan
     }
 	bool retval = false;
 	if (this->activate_existing(notification.get())) {
-		if (m_initialized) { // ignore update action - it cant be initialized if canvas and imgui context is not ready
+		if (m_initialized && m_imgui_ready) {
 			if (notification->get_type() == NotificationType::SlicingWarning) {
 				m_pop_notifications.back()->append(notification->get_data().ori_text);
 			} else {
@@ -3129,6 +3129,10 @@ void NotificationManager::stop_delayed_notifications_of_type(const NotificationT
 
 void NotificationManager::render_notifications(GLCanvas3D &canvas, float overlay_width, float bottom_margin, float right_margin)
 {
+	// Notifications render inside an ImGui frame, so the font atlas is built from this point on
+	// and pushed notifications may safely measure their text.
+	m_imgui_ready = true;
+
 	sort_notifications();
 
 	float bottom_up_last_y = bottom_margin; // ORCA dont scale margins
@@ -3339,17 +3343,7 @@ size_t NotificationManager::get_notification_count() const
 void NotificationManager::bbl_show_plateinfo_notification(const std::string &text)
 {
     NotificationData data{NotificationType::BBLPlateInfo, NotificationLevel::PrintInfoNotificationLevel, BBL_NOTICE_MAX_INTERVAL, text};
-
-    for (std::unique_ptr<PopNotification> &notification : m_pop_notifications) {
-        if (notification->get_type() == NotificationType::BBLPlateInfo) {
-            notification->reinit();
-            notification->update(data);
-            return;
-        }
-    }
-
-    auto notification = std::make_unique<NotificationManager::PopNotification>(data, m_id_provider, m_evt_handler);
-    push_notification_data(std::move(notification), 0);
+    push_notification_data(data, 0);
 }
 
 void NotificationManager::bbl_close_3mf_warn_notification()
@@ -3360,20 +3354,10 @@ void NotificationManager::bbl_close_3mf_warn_notification()
         }
 }
 
-void NotificationManager::bbl_show_3mf_warn_notification(const std::string &text)
+void NotificationManager::bbl_show_3mf_warn_notification(const std::string &text, NotificationLevel level)
 {
-    NotificationData data{NotificationType::BBL3MFInfo, NotificationLevel::ErrorNotificationLevel, BBL_NOTICE_MAX_INTERVAL, text};
-
-    for (std::unique_ptr<PopNotification> &notification : m_pop_notifications) {
-        if (notification->get_type() == NotificationType::BBL3MFInfo) {
-            notification->reinit();
-            notification->update(data);
-            return;
-        }
-    }
-
-    auto notification = std::make_unique<NotificationManager::PopNotification>(data, m_id_provider, m_evt_handler);
-    push_notification_data(std::move(notification), 0);
+    NotificationData data{NotificationType::BBL3MFInfo, level, BBL_NOTICE_MAX_INTERVAL, text};
+    push_notification_data(data, 0);
 }
 
 void NotificationManager::bbl_close_plateinfo_notification()
@@ -3388,17 +3372,7 @@ void NotificationManager::bbl_close_plateinfo_notification()
 void NotificationManager::bbl_show_preview_only_notification(const std::string &text)
 {
     NotificationData data{NotificationType::BBLPreviewOnlyMode, NotificationLevel::WarningNotificationLevel, 0, text};
-
-    for (std::unique_ptr<PopNotification> &notification : m_pop_notifications) {
-        if (notification->get_type() == NotificationType::BBLPreviewOnlyMode) {
-            notification->reinit();
-            notification->update(data);
-            return;
-        }
-    }
-
-    auto notification = std::make_unique<NotificationManager::PopNotification>(data, m_id_provider, m_evt_handler);
-    push_notification_data(std::move(notification), 0);
+    push_notification_data(data, 0);
 }
 
 void NotificationManager::bbl_close_preview_only_notification()
diff --git a/src/slic3r/GUI/NotificationManager.hpp b/src/slic3r/GUI/NotificationManager.hpp
index bf0a5cfe1a..cb65524dac 100644
--- a/src/slic3r/GUI/NotificationManager.hpp
+++ b/src/slic3r/GUI/NotificationManager.hpp
@@ -378,7 +378,9 @@ public:
     void bbl_close_plateinfo_notification();
 
     //BBS-- 3mf warning
-    void bbl_show_3mf_warn_notification(const std::string &text);
+    // level defaults to the historical error styling; callers reporting informational
+    // 3MF load notices (published settings) pass WarningNotificationLevel instead.
+    void bbl_show_3mf_warn_notification(const std::string &text, NotificationLevel level = NotificationLevel::ErrorNotificationLevel);
     void bbl_close_3mf_warn_notification();
 
     //BBS--preview only mode
@@ -1052,6 +1054,11 @@ private:
 	bool m_is_dark = false;
 	// set by init(), until false notifications are only added not updated and frame is not requested after push
 	bool m_initialized{ false };
+	// set by render_notifications() on the first rendered frame. m_initialized only proves the
+	// manager exists, not that the ImGui context can measure text: the font atlas is built lazily
+	// in ImGuiWrapper::new_frame() on the first GL render, so updating a notification before that
+	// (PopNotification::init -> count_spaces -> ImGui::CalcTextSize) dereferences a null font.
+	bool m_imgui_ready{ false };
 	// Target for wxWidgets events sent by clicking on the hyperlink available at some notifications.
 	wxEvtHandler*                m_evt_handler;
 	// Cache of IDs to identify and reuse ImGUI windows.
@@ -1076,7 +1083,10 @@ private:
 		NotificationType::ProgressBar,
 		NotificationType::PrintHostUpload,
         NotificationType::SimplifySuggestion,
-        NotificationType::ValidateWarning
+        NotificationType::ValidateWarning,
+        // A published file load can produce several distinct 3MF warnings (invalid values,
+        // skipped settings, changed slots); let them stack rather than clobber each other.
+        NotificationType::BBL3MFInfo
 	};
 	//prepared (basic) notifications
 	// non-static so its not loaded too early. If static, the translations wont load correctly.
diff --git a/src/slic3r/GUI/ObjColorDialog.cpp b/src/slic3r/GUI/ObjColorDialog.cpp
index d5a37fc9a7..ef5d4ba9d2 100644
--- a/src/slic3r/GUI/ObjColorDialog.cpp
+++ b/src/slic3r/GUI/ObjColorDialog.cpp
@@ -86,8 +86,6 @@ ObjColorDialog::ObjColorDialog(wxWindow *parent, Slic3r::ObjDialogInOut &in_out,
                 wxDefaultPosition,
                 wxDefaultSize,
                 wxDEFAULT_DIALOG_STYLE /* | wxRESIZE_BORDER*/)
-    , m_filament_ids(in_out.filament_ids)
-    , m_first_extruder_id(in_out.first_extruder_id)
 {
     auto m_line_top = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxSize(-1, 1));
     m_line_top->SetBackgroundColour(wxColour(166, 169, 170));
diff --git a/src/slic3r/GUI/ObjColorDialog.hpp b/src/slic3r/GUI/ObjColorDialog.hpp
index 19ed1dcb24..34f9eb5de5 100644
--- a/src/slic3r/GUI/ObjColorDialog.hpp
+++ b/src/slic3r/GUI/ObjColorDialog.hpp
@@ -94,7 +94,6 @@ private:
     std::vector<int>      m_cluster_map_filaments;//show middle
     int                   m_max_filament_index = 0;
     std::vector<wxColour> m_cluster_colours;//from_algo and show left
-    bool                  m_can_add_filament{true};
     bool                  m_deal_thumbnail_flag{false};
     std::vector<wxColour> m_new_add_colors;
     std::vector<wxColour> m_new_add_final_colors;
@@ -123,8 +122,6 @@ private:
     wxBoxSizer *                      m_main_sizer     = nullptr;
     wxBoxSizer *                      m_buttons_sizer   = nullptr;
     std::unordered_map<int, Button *> m_button_list;
-    std::vector<unsigned char>&      m_filament_ids;
-    unsigned char &                  m_first_extruder_id;
 };
 
 #endif  // _WIPE_TOWER_DIALOG_H_
\ No newline at end of file
diff --git a/src/slic3r/GUI/OptionsGroup.cpp b/src/slic3r/GUI/OptionsGroup.cpp
index 25c13c4b8d..99151ca599 100644
--- a/src/slic3r/GUI/OptionsGroup.cpp
+++ b/src/slic3r/GUI/OptionsGroup.cpp
@@ -698,10 +698,15 @@ std::string OptionsGroup::pick_plugin(const ConfigOptionDef& opt)
     Slic3r::PluginManager& manager = Slic3r::PluginManager::instance();
     const Slic3r::PluginCapabilityType plugin_type = Slic3r::plugin_capability_type_from_string(opt.plugin_type);
     if (plugin_type == Slic3r::PluginCapabilityType::Unknown) {
-        const std::string message = opt.plugin_type.empty()
-                                        ? "This setting does not specify a plugin capability type."
-                                        : "This setting specifies an unrecognized plugin capability type: '" + opt.plugin_type + "'.";
-        wxMessageBox(from_u8(message), _L("Plugin Selection"), wxOK | wxICON_WARNING, m_parent);
+        MessageDialog dlg(m_parent, 
+            opt.plugin_type.empty() ? _L("This setting does not specify a plugin capability type.")
+                                    : _L("This setting specifies an unrecognized plugin capability type: ") + "'" + opt.plugin_type + "'.", 
+            _L("Plugin Selection"), 
+            wxOK | wxICON_WARNING
+        );
+        dlg.CenterOnParent();
+        dlg.ShowModal();
+
         return {};
     }
 
@@ -714,7 +719,13 @@ std::string OptionsGroup::pick_plugin(const ConfigOptionDef& opt)
     });
 
     if (caps.empty()) {
-        wxMessageBox(_L("No plugins capabilities available for this type.\nEnable or install some to use."), _L("Plugin Selection"), wxOK | wxICON_INFORMATION, m_parent);
+        MessageDialog dlg(m_parent,
+            _L("No plugins capabilities available for this type.\nEnable or install some to use."),
+            _L("Plugin Selection"),
+            wxOK | wxICON_INFORMATION
+        );
+        dlg.CenterOnParent();
+        dlg.ShowModal();
         return {};
     }
 
@@ -787,11 +798,9 @@ void ConfigOptionsGroup::back_to_config_value(const DynamicPrintConfig& config,
 #endif
     else if (opt_key == "printer_agent")
     {
-        // why: printer_agent is a coString kept out of m_opt_map. The generic non-opt_map revert
-        // below restores the edited config from get_value(), but a deregistered/"(missing)" saved
-        // id has no selectable row, so the field yields no value and the edited config keeps the
-        // user's interim pick -> stuck dirty. Restore the SAVED id straight into the edited config
-        // (displayable or not; config is the saved or system baseline), then repaint and notify.
+        // A deregistered/"(missing)" saved id has no selectable row, so the field yields no
+        // value. Restore the saved id directly instead of letting the generic revert path read
+        // the field value back into the edited config.
         const std::string saved_id = config.opt_string("printer_agent");
         set_value(opt_key, saved_id);
         this->change_opt_value(opt_key, saved_id);
diff --git a/src/slic3r/GUI/ParamsPanel.hpp b/src/slic3r/GUI/ParamsPanel.hpp
index 0726db91d3..91bf3d2a7e 100644
--- a/src/slic3r/GUI/ParamsPanel.hpp
+++ b/src/slic3r/GUI/ParamsPanel.hpp
@@ -66,7 +66,6 @@ class ParamsPanel : public wxPanel
 {
 #if __WXOSX__
     wxWindow*            m_tmp_panel;
-    int                 m_size_move = -1;
 #endif // __WXOSX__
 
 	private:
diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp
index 6a36b4295b..ba0d9580dc 100644
--- a/src/slic3r/GUI/PartPlate.cpp
+++ b/src/slic3r/GUI/PartPlate.cpp
@@ -1,5 +1,6 @@
 #include <cstddef>
 #include <algorithm>
+#include <limits>
 #include <numeric>
 #include <vector>
 #include <string>
@@ -16,10 +17,12 @@
 #include <boost/log/trivial.hpp>
 #include <boost/nowide/convert.hpp>
 #include <boost/nowide/cstdio.hpp>
+#include <boost/nowide/fstream.hpp>
 #include <boost/algorithm/string/predicate.hpp>
 
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Polygon.hpp"
+#include "libslic3r/GCode/WipeTowerEstimate.hpp"
 #include "libslic3r/ClipperUtils.hpp"
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/Geometry.hpp"
@@ -1050,7 +1053,13 @@ void PartPlate::render_grid(bool bottom) {
 
 void PartPlate::render_height_limit(PartPlate::HeightLimitMode mode)
 {
-	if (m_print && m_print->config().print_sequence == PrintSequence::ByObject && mode != HEIGHT_LIMIT_NONE)
+	// Orca: a prime tower compacted by "No sparse layers" drags the nozzle back down to the plate on
+	// every toolchange, so the rod and the lid limit how tall a neighbouring object may be exactly as
+	// they do in sequential printing. The reference lines are just as useful there.
+	const bool relevant_for_print_mode = m_print && (m_print->config().print_sequence == PrintSequence::ByObject ||
+	                                                 (m_print->config().print_sequence == PrintSequence::ByLayer &&
+	                                                  wipe_tower_sparse_layers_skipped(m_print->config()) && m_print->has_wipe_tower()));
+	if (relevant_for_print_mode && mode != HEIGHT_LIMIT_NONE)
 	{
 		// draw lower limit
 	    // ORCA: OpenGL Core Profile
@@ -1110,7 +1119,7 @@ void PartPlate::show_tooltip(const std::string tooltip)
 {
     const auto scale = m_plater->get_current_canvas3D()->get_scale();
     ImGui::PushStyleVar(ImGuiStyleVar_WindowPadding, {6 * scale, 3 * scale});
-    ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, {3 * scale});
+    ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, 3 * scale);
     ImGui::PushStyleColor(ImGuiCol_PopupBg, ImGuiWrapper::COL_WINDOW_BACKGROUND);
     ImGui::PushStyleColor(ImGuiCol_Border, {0, 0, 0, 0});
     ImGui::PushStyleColor(ImGuiCol_Text, ImVec4(1.00f, 1.00f, 1.00f, 1.00f));
@@ -1531,8 +1540,23 @@ std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode) const
     if (check_objects_empty_and_gcode3mf(plate_extruders)) {
         return plate_extruders;
     }
-	// if 3mf file
-	const DynamicPrintConfig& glb_config = wxGetApp().preset_bundle->prints.get_edited_preset().config;
+	return get_extruders(conside_custom_gcode, wxGetApp().preset_bundle->prints.get_edited_preset().config, wxGetApp().preset_bundle->project_config);
+}
+
+// The plate's filaments, with the global keys read from the given configs rather than the
+// application's presets: the wipe tower estimate is also called under the CLI, which has no
+// application object. get_extruders(bool) passes the edited presets; a full config serves both.
+std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode, const DynamicPrintConfig& glb_config, const DynamicPrintConfig& project_config) const
+{
+	std::vector<int> plate_extruders;
+	// A plate from a sliced .gcode.3mf holds no objects, so report the filaments the G-code
+	// used. check_objects_empty_and_gcode3mf does this for get_extruders(bool), but reaches
+	// the plater, which the CLI has none of; slice_filaments_info is only filled for such a plate.
+	if (m_model->objects.empty()) {
+		for (const FilamentInfo &info : slice_filaments_info)
+			plate_extruders.push_back(info.id + 1);
+		return plate_extruders;
+	}
 	int glb_support_intf_extr = glb_config.opt_int("support_interface_filament");
 	int glb_support_extr = glb_config.opt_int("support_filament");
 	int glb_outer_wall_extr = glb_config.opt_int("outer_wall_filament_id");
@@ -1549,7 +1573,9 @@ std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode) const
     glb_support |= glb_config.opt_int("raft_layers") > 0;
 
 	for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-		if (!contain_instance_totally(obj_idx, 0))
+		// Any instance on the plate counts, as PrintApply does: after an arrange, instance 0
+		// can sit on a different plate.
+		if (!contain_any_instance_totally(obj_idx))
 			continue;
 
 		ModelObject* mo = m_model->objects[obj_idx];
@@ -1662,7 +1688,7 @@ std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode) const
 	if (conside_custom_gcode) {
 		//BBS
         int nums_extruders = 0;
-        if (const ConfigOptionStrings *color_option = dynamic_cast<const ConfigOptionStrings *>(wxGetApp().preset_bundle->project_config.option("filament_colour"))) {
+        if (const ConfigOptionStrings *color_option = dynamic_cast<const ConfigOptionStrings *>(project_config.option("filament_colour"))) {
             nums_extruders = color_option->values.size();
 			if (m_model->plates_custom_gcodes.find(m_plate_index) != m_model->plates_custom_gcodes.end()) {
 				for (auto item : m_model->plates_custom_gcodes.at(m_plate_index).gcodes) {
@@ -1681,9 +1707,8 @@ std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode) const
 	// is never loaded into a tray, so callers (AMS mapping, filament checks) must see the
 	// physical filaments it resolves to instead.
 	{
-		auto& project_config = wxGetApp().preset_bundle->project_config;
-		auto* is_mixed_opt = project_config.option<ConfigOptionBools>("filament_is_mixed");
-		auto* comp_strs_opt = project_config.option<ConfigOptionStrings>("filament_mixed_components");
+		const auto* is_mixed_opt = project_config.option<ConfigOptionBools>("filament_is_mixed");
+		const auto* comp_strs_opt = project_config.option<ConfigOptionStrings>("filament_mixed_components");
 		if (is_mixed_opt && comp_strs_opt && has_any_mixed_filament(is_mixed_opt->values)) {
 			std::vector<unsigned int> ext_0based;
 			for (int e : plate_extruders)
@@ -1698,7 +1723,7 @@ std::vector<int> PartPlate::get_extruders(bool conside_custom_gcode) const
 	return plate_extruders;
 }
 
-std::vector<int> PartPlate::get_extruders_under_cli(bool conside_custom_gcode, DynamicPrintConfig& full_config) const
+std::vector<int> PartPlate::get_extruders_under_cli(bool conside_custom_gcode, DynamicPrintConfig& full_config, bool expand_mixed_slots) const
 {
     std::vector<int> plate_extruders;
 
@@ -1859,7 +1884,7 @@ std::vector<int> PartPlate::get_extruders_under_cli(bool conside_custom_gcode, D
     // Expand mixed filament slots to their physical components. A mixed slot is virtual and
     // is never loaded into a tray, so callers (AMS mapping, filament checks) must see the
     // physical filaments it resolves to instead.
-    {
+    if (expand_mixed_slots) {
         auto* is_mixed_opt = full_config.option<ConfigOptionBools>("filament_is_mixed");
         auto* comp_strs_opt = full_config.option<ConfigOptionStrings>("filament_mixed_components");
         if (is_mixed_opt && comp_strs_opt && has_any_mixed_filament(is_mixed_opt->values)) {
@@ -1899,7 +1924,7 @@ std::vector<int> PartPlate::get_extruders_without_support(bool conside_custom_gc
 	const DynamicPrintConfig& glb_config = wxGetApp().preset_bundle->prints.get_edited_preset().config;
 
 	for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-		if (!contain_instance_totally(obj_idx, 0))
+		if (!contain_any_instance_totally(obj_idx))
 			continue;
 
 		ModelObject* mo = m_model->objects[obj_idx];
@@ -2070,7 +2095,7 @@ bool PartPlate::check_single_extruder_mixed_filament_risk(const DynamicPrintConf
                                             "which may significantly increase waste and the risk of nozzle / waste-chute clogging.");
 
     for (int obj_idx = 0; obj_idx < (int)m_model->objects.size(); ++obj_idx) {
-        if (!contain_instance_totally(obj_idx, 0))
+        if (!contain_any_instance_totally(obj_idx))
             continue;
         ModelObject *mo = m_model->objects[obj_idx];
         int obj_ext = mo->config.has("extruder") ? mo->config.extruder() : 1;
@@ -2289,7 +2314,7 @@ bool PartPlate::check_compatible_of_nozzle_and_filament(const DynamicPrintConfig
         return wipe_tower_size;
 
     for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-        if (!use_global_objects && !contain_instance_totally(obj_idx, 0))
+        if (!use_global_objects && !contain_any_instance_totally(obj_idx))
             continue;
 
         BoundingBoxf3 bbox = m_model->objects[obj_idx]->bounding_box();
@@ -2311,113 +2336,97 @@ bool PartPlate::check_compatible_of_nozzle_and_filament(const DynamicPrintConfig
     return wipe_tower_size;
 }*/
 
-Vec3d PartPlate::estimate_wipe_tower_size(const DynamicPrintConfig & config, const double w, const double wipe_volume, int extruder_count, int plate_extruder_size, bool use_global_objects, bool enable_wrapping_detection) const
+WipeTowerFootprint PartPlate::estimate_wipe_tower_footprint(const DynamicPrintConfig &config, int plate_extruder_size, bool use_global_objects) const
 {
-    Vec3d wipe_tower_size;
-    double layer_height = 0.08f; // hard code layer height
-    double max_height = 0.f;
-    wipe_tower_size.setZero();
+    // The CLI calls this too, so the plate's filaments are derived from the passed config:
+    // get_extruders(bool) reads the same keys off wxGetApp()'s presets, which the CLI has none of.
+    // An explicit count is a floor: init-time and arrange estimates size an empty plate for that
+    // many generic filaments, the lowest ids not already on the plate.
+    std::vector<int> plate_extruders = get_extruders(true, config, config);
+    for (int id = 1; int(plate_extruders.size()) < plate_extruder_size; ++id)
+        if (std::find(plate_extruders.begin(), plate_extruders.end(), id) == plate_extruders.end())
+            plate_extruders.push_back(id);
+    // The wipe tower filament joins the tool ordering even when unused (Print::extruders), so
+    // validation counts it - but only where there is a tower to join, which is the
+    // has_wipe_tower() half of that guard.
+    const ConfigOption *wipe_tower_filament_opt = config.option("wipe_tower_filament");
+    const ConfigOption *enable_prime_tower_opt  = config.option("enable_prime_tower");
+    const int           wipe_tower_filament     = wipe_tower_filament_opt != nullptr ? wipe_tower_filament_opt->getInt() : 0;
+    if (enable_prime_tower_opt != nullptr && enable_prime_tower_opt->getBool() && plate_extruders.size() > 1 && wipe_tower_filament > 0 &&
+        std::find(plate_extruders.begin(), plate_extruders.end(), wipe_tower_filament) == plate_extruders.end())
+        plate_extruders.push_back(wipe_tower_filament);
+    if (plate_extruders.empty())
+        return WipeTowerFootprint();
 
-    const ConfigOption* layer_height_opt = config.option("layer_height");
-    if (layer_height_opt)
-        layer_height = layer_height_opt->getFloat();
-
-    // empty plate
-    if (plate_extruder_size == 0)
-    {
-        std::vector<int> plate_extruders = get_extruders(true);
-        plate_extruder_size = plate_extruders.size();
-    }
-    if (plate_extruder_size == 0)
-        return wipe_tower_size;
-
-    for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-        if (!use_global_objects && !contain_instance_totally(obj_idx, 0))
+    // Tallest object on this plate and the thinnest layer it is sliced at, resolved per object
+    // as PrintObject resolves them (override, else preset) and over this plate's objects only -
+    // seeding from the global value, or folding in an off-plate override, diverges from Print.
+    const ConfigOption *layer_height_opt    = config.option("layer_height");
+    const double        global_layer_height = layer_height_opt != nullptr ? layer_height_opt->getFloat() : 0.08;
+    double              max_height          = 0.;
+    double              layer_height        = std::numeric_limits<double>::max();
+    for (int obj_idx = 0; obj_idx < int(m_model->objects.size()); ++obj_idx) {
+        const ModelObject *object = m_model->objects[obj_idx];
+        if (!use_global_objects && !contain_any_instance_totally(obj_idx))
             continue;
-
-		BoundingBoxf3 bbox = m_model->objects[obj_idx]->bounding_box_exact();
-        max_height = std::max(bbox.size().z(), max_height);
-    }
-    wipe_tower_size(2) = max_height;
-    //const DynamicPrintConfig &dconfig = wxGetApp().preset_bundle->prints.get_edited_preset().config;
-    auto timelapse_type    = config.option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
-    bool need_wipe_tower = (timelapse_type ? (timelapse_type->value == TimelapseType::tlSmooth) : false) | enable_wrapping_detection;
-    double extra_spacing     = config.option("prime_tower_infill_gap")->getFloat() / 100.;
-    const ConfigOptionEnum<WipeTowerWallType>* use_rib_wall_opt = config.option<ConfigOptionEnum<WipeTowerWallType>>("wipe_tower_wall_type");
-    bool use_rib_wall = use_rib_wall_opt ? use_rib_wall_opt->value == WipeTowerWallType::wtwRib: false;
-    double rib_width = config.option("wipe_tower_rib_width")->getFloat();
-    double depth;
-    double filament_change_volume=0.;
-    {
-        std::vector<double>             filament_change_lengths;
-        auto                filament_change_lengths_opt = m_print->config().option<ConfigOptionFloats>("filament_change_length");
-        if (filament_change_lengths_opt) filament_change_lengths = filament_change_lengths_opt->values;
-        double length = filament_change_lengths.empty() ? 0 : *std::max_element(filament_change_lengths.begin(), filament_change_lengths.end());
-        double diameter = 1.75;
-        std::vector<double> diameters;
-        auto                filament_diameter_opt = m_print->config().option<ConfigOptionFloats>("filament_diameter");
-        if (filament_diameter_opt) diameters = filament_diameter_opt->values;
-        diameter = diameters.empty() ? diameter : *std::max_element(diameters.begin(), diameters.end());
-        filament_change_volume = length * PI * diameter * diameter / 4.;
-    }
-    double volume = wipe_volume * (extruder_count == 2 ? plate_extruder_size : (plate_extruder_size - 1));
-    if (extruder_count == 2) volume += filament_change_volume * (int) (plate_extruder_size / 2);
-    // Read from the passed plate config — m_print may not have been applied yet
-    // (fresh plates, CLI), in which case its PrintConfig still holds defaults.
-    const auto *purge_opt  = config.option<ConfigOptionBool>("purge_in_prime_tower");
-    const auto *semm_opt   = config.option<ConfigOptionBool>("single_extruder_multi_material");
-    const bool  semm_flush = purge_opt && purge_opt->value && semm_opt && semm_opt->value;
-    if (semm_flush) volume = WipeTower2::estimate_semm_flush_volume(config, plate_extruder_size);
-    if (use_rib_wall) {
-        depth = std::sqrt(volume / layer_height * extra_spacing);
-        if (need_wipe_tower || plate_extruder_size > 1) {
-            float min_wipe_tower_depth = WipeTower::get_limit_depth_by_height(max_height);
-            double volume_depth         = depth;
-            depth = std::max((double) min_wipe_tower_depth, depth);
-            rib_width = std::min(rib_width, depth / 2);
-            depth = rib_width / std::sqrt(2) + std::max(depth + m_print->config().wipe_tower_extra_rib_length.value, volume_depth);
-            wipe_tower_size(0) = wipe_tower_size(1) = depth;
+        // Per instance, to match PrintObject::size(); the union over instances differs once
+        // they are rotated apart. The cached convex hull has the mesh's z extent and is cheap
+        // enough for every scene reload.
+        for (int inst_idx = 0; inst_idx < int(object->instances.size()); ++inst_idx) {
+            if (!use_global_objects && !contain_instance_totally(obj_idx, inst_idx))
+                continue;
+            max_height = std::max(max_height, object->instance_convex_hull_bounding_box(inst_idx, true).size().z());
         }
+        const ConfigOption *object_layer_height = object->config.option("layer_height");
+        layer_height = std::min(layer_height, object_layer_height != nullptr ? object_layer_height->getFloat() : global_layer_height);
     }
-    else {
-        depth = volume / (layer_height * w);
-        // The flush volumes already hold the spacing between wipes.
-        if (!semm_flush) depth *= extra_spacing;
-        if (need_wipe_tower || depth > EPSILON) {
-            float min_wipe_tower_depth = WipeTower::get_limit_depth_by_height(max_height);
-            depth = std::max((double)min_wipe_tower_depth, depth);
-        }
-        wipe_tower_size(0) = w;
-        wipe_tower_size(1) = depth;
-    }
+    if (layer_height == std::numeric_limits<double>::max())
+        layer_height = global_layer_height;
 
-    return wipe_tower_size;
+    std::vector<unsigned int> filament_ids;
+    for (int id : plate_extruders)
+        if (id > 0)
+            filament_ids.push_back(static_cast<unsigned int>(id - 1));
+    return Slic3r::estimate_wipe_tower_footprint(config, resolve_wipe_tower_type(config), filament_ids, layer_height, max_height);
 }
 
-arrangement::ArrangePolygon PartPlate::estimate_wipe_tower_polygon(const DynamicPrintConfig& config, int plate_index, Vec3d& wt_pos, Vec3d& wt_size, int extruder_count, int plate_extruder_size, bool use_global_objects) const
+arrangement::ArrangePolygon PartPlate::estimate_wipe_tower_polygon(const DynamicPrintConfig& config, int plate_index, Vec3d& wt_pos, Vec3d& wt_size, int plate_extruder_size, bool use_global_objects) const
 {
 	float x = dynamic_cast<const ConfigOptionFloats*>(config.option("wipe_tower_x"))->get_at(plate_index);
 	float y = dynamic_cast<const ConfigOptionFloats*>(config.option("wipe_tower_y"))->get_at(plate_index);
-	float w = dynamic_cast<const ConfigOptionFloat*>(config.option("prime_tower_width"))->value;
 	//float a = dynamic_cast<const ConfigOptionFloat*>(config.option("wipe_tower_rotation_angle"))->value;
-	float v = dynamic_cast<const ConfigOptionFloat*>(config.option("prime_volume"))->value;
-    float tower_brim_width = dynamic_cast<const ConfigOptionFloat*>(config.option("prime_tower_brim_width"))->value;
-    const ConfigOptionBool * wrapping_opt = dynamic_cast<const ConfigOptionBool *>(config.option("enable_wrapping_detection"));
-	bool enable_wrapping = (wrapping_opt != nullptr) && wrapping_opt->value;
-	wt_size = estimate_wipe_tower_size(config, w, v, extruder_count, plate_extruder_size, use_global_objects, enable_wrapping);
+	const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(config, plate_extruder_size, use_global_objects);
+	wt_size = Vec3d(footprint.width, footprint.depth, footprint.height);
 	int plate_width=m_width, plate_depth=m_depth;
-	w = wt_size(0); // effective width; differs from prime_tower_width when the rib wall squares the tower
+	float w = wt_size(0); // effective width; differs from prime_tower_width when the rib wall squares the tower
 	float depth = wt_size(1);
-	float margin = WIPE_TOWER_MARGIN + tower_brim_width, wp_brim_width = 0.f;
-	const ConfigOption* wipe_tower_brim_width_opt = config.option("prime_tower_brim_width");
-	if (wipe_tower_brim_width_opt) {
-		wp_brim_width = wipe_tower_brim_width_opt->getFloat();
-        if (wp_brim_width < 0) wp_brim_width = WipeTower::get_auto_brim_by_height((float) wt_size.z());
-		BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format("arrange wipe_tower: wp_brim_width %1%") % wp_brim_width;
-	}
-
-	x = std::clamp(x, margin, (float)plate_width - w - margin - wp_brim_width);
-    y = std::clamp(y, margin, (float)plate_depth - depth - margin - wp_brim_width);
+	// Resolved brim, not the raw option: "Auto" (-1) would yield a margin of 0 and let the
+	// clamp put the brim off the bed. Matches set_default_wipe_tower_pos_for_plate.
+	float wp_brim_width = float(footprint.brim_width);
+	// A Type2 stabilization cone bulges past the body box like a brim does - fold its worst-axis
+	// bulge into the same margin.
+	const BoundingBox outline = get_extents(estimate_wipe_tower_first_layer_outline(config, resolve_wipe_tower_type(config), w, depth, wt_size.z()));
+	wp_brim_width += float(std::max({0., unscaled(outline.max.x()) - w, unscaled(outline.max.y()) - depth, -unscaled(outline.min.x()), -unscaled(outline.min.y())}));
+	// A position valid by WIPE_TOWER_MARGIN is the user's choice and stays untouched; an
+	// invalid one is re-placed with the comfort margin (falling back to the validity bounds
+	// on cramped plates). std::clamp is UB if lo > hi, so keep every hi >= lo.
+	const float margin = WIPE_TOWER_MARGIN + wp_brim_width;
+	BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format("arrange wipe_tower: wp_brim_width %1%") % wp_brim_width;
+	const float x_hi   = std::max(margin, (float) plate_width - w - margin);
+	const float y_hi   = std::max(margin, (float) plate_depth - depth - margin);
+	const float margin_c = (float) WIPE_TOWER_AUTO_MARGIN + wp_brim_width;
+	float x_lo_c = margin_c, x_hi_c = (float) plate_width - w - margin_c;
+	if (x_lo_c > x_hi_c) { x_lo_c = margin; x_hi_c = x_hi; }
+	float y_lo_c = margin_c, y_hi_c = (float) plate_depth - depth - margin_c;
+	if (y_lo_c > y_hi_c) { y_lo_c = margin; y_hi_c = y_hi; }
+	// Drag clamps reach this limit through the volume's bounding box (post-slice: the real
+	// mesh, a couple of mm inside this reserved estimate), so a drop can land slightly out
+	// of bounds — snap it onto the bound; only far-out positions get the comfort re-place.
+	const float tol = 5.f;
+	if (x < margin - tol || x > x_hi + tol) x = std::clamp(x, x_lo_c, x_hi_c);
+	else                                    x = std::clamp(x, margin, x_hi);
+	if (y < margin - tol || y > y_hi + tol) y = std::clamp(y, y_lo_c, y_hi_c);
+	else                                    y = std::clamp(y, margin, y_hi);
     wt_pos(0) = x;
     wt_pos(1) = y;
     wt_pos(2) = 0.f;
@@ -2755,6 +2764,20 @@ bool PartPlate::contain_instance_totally(int obj_id, int instance_id) const
 	return result;
 }
 
+//judge whether any of the object's instances is totally included in plate or not
+bool PartPlate::contain_any_instance_totally(int obj_id) const
+{
+	if (obj_id < 0 || obj_id >= int(m_model->objects.size()))
+		return false;
+
+	const ModelObject *object = m_model->objects[obj_id];
+	for (int instance_id = 0; instance_id < int(object->instances.size()); ++instance_id)
+		if (contain_instance_totally(obj_id, instance_id))
+			return true;
+
+	return false;
+}
+
 //check whether instance is outside the plate or not
 bool PartPlate::check_outside(int obj_id, int instance_id, BoundingBoxf3* bounding_box)
 {
@@ -4490,26 +4513,16 @@ void PartPlateList::set_default_wipe_tower_pos_for_plate(int plate_idx, bool ini
         f_volume_maps = wxGetApp().preset_bundle->get_default_nozzle_volume_types_for_filaments(filament_maps);
     }
     DynamicPrintConfig full_config = wxGetApp().preset_bundle->full_config(false, filament_maps, f_volume_maps);
-    float w = dynamic_cast<const ConfigOptionFloat *>(full_config.option("prime_tower_width"))->value;
-    float v = dynamic_cast<const ConfigOptionFloat *>(full_config.option("prime_volume"))->value;
-    bool enable_wrapping = false;
-    const ConfigOptionBool *wrapping_opt = dynamic_cast<const ConfigOptionBool *>(full_config.option("enable_wrapping_detection"));
-    if (wrapping_opt) enable_wrapping = wrapping_opt->value;
-    int nozzle_nums = wxGetApp().preset_bundle->get_printer_extruder_count();
-    Vec3d wipe_tower_size = part_plate->estimate_wipe_tower_size(full_config, w, v, nozzle_nums, init_pos ? 2 : 0, false, enable_wrapping);
+    WipeTowerFootprint footprint = part_plate->estimate_wipe_tower_footprint(full_config, init_pos ? 2 : 0);
 
-    if (!init_pos && (is_approx(wipe_tower_size(0), 0.0) || is_approx(wipe_tower_size(1), 0.0))) {
-        wipe_tower_size = part_plate->estimate_wipe_tower_size(full_config, w, v, nozzle_nums, 2, false, enable_wrapping);
+    if (!init_pos && (is_approx(footprint.width, 0.0) || is_approx(footprint.depth, 0.0))) {
+        footprint = part_plate->estimate_wipe_tower_footprint(full_config, 2);
     }
+    Vec3d wipe_tower_size(footprint.width, footprint.depth, footprint.height);
 
-    // Compute brim-aware margin: brim extends outward from tower position
-    float brim_width = 0.f;
-    const ConfigOptionFloat *brim_opt = full_config.option<ConfigOptionFloat>("prime_tower_brim_width");
-    if (brim_opt) {
-        brim_width = brim_opt->value;
-        if (brim_width < 0) brim_width = WipeTower::get_auto_brim_by_height((float) wipe_tower_size.z());
-    }
-    const float margin = WIPE_TOWER_MARGIN + brim_width;
+    // Brim-aware margin: the brim extends outward from the tower position.
+    const float brim_width = float(footprint.brim_width);
+    const float margin     = WIPE_TOWER_AUTO_MARGIN + brim_width;
 
     // clamp wipe tower position within plate boundaries
     {
diff --git a/src/slic3r/GUI/PartPlate.hpp b/src/slic3r/GUI/PartPlate.hpp
index ddfc87801f..c05775a963 100644
--- a/src/slic3r/GUI/PartPlate.hpp
+++ b/src/slic3r/GUI/PartPlate.hpp
@@ -11,6 +11,7 @@
 #include "libslic3r/GCode/GCodeProcessor.hpp"
 #include "libslic3r/Format/bbs_3mf.hpp"
 #include "libslic3r/Slicing.hpp"
+#include "libslic3r/GCode/WipeTowerEstimate.hpp"
 #include "libslic3r/Arrange.hpp"
 #include "Plater.hpp"
 #include "libslic3r/Model.hpp"
@@ -339,12 +340,18 @@ public:
 
     Vec3d get_origin() { return m_origin; }
     //Vec3d calculate_wipe_tower_size(const DynamicPrintConfig &config, const double w, const double wipe_volume, int plate_extruder_size = 0, bool use_global_objects = false) const;
-    Vec3d estimate_wipe_tower_size(const DynamicPrintConfig & config, const double w, const double wipe_volume, int extruder_count = 1, int plate_extruder_size = 0, bool use_global_objects = false, bool enable_wrapping_detection = false) const;
-    arrangement::ArrangePolygon estimate_wipe_tower_polygon(const DynamicPrintConfig & config, int plate_index, Vec3d& wt_pos, Vec3d& wt_size, int extruder_count = 1, int plate_extruder_size = 0, bool use_global_objects = false) const;
+    // plate_extruder_size: a floor on the filaments purged on the plate; its own are always
+    //                      counted, so 0 sizes for exactly those.
+    // use_global_objects skips the containment test, which the CLI needs before objects are
+    // assigned to plates - the layer height is then the project's thinnest, which over-reserves.
+    WipeTowerFootprint estimate_wipe_tower_footprint(const DynamicPrintConfig & config, int plate_extruder_size = 0, bool use_global_objects = false) const;
+    arrangement::ArrangePolygon estimate_wipe_tower_polygon(const DynamicPrintConfig & config, int plate_index, Vec3d& wt_pos, Vec3d& wt_size, int plate_extruder_size = 0, bool use_global_objects = false) const;
     bool check_objects_empty_and_gcode3mf(std::vector<int> &result) const;
     // get used filaments from config, 1 based idx
     std::vector<int> get_extruders(bool conside_custom_gcode = false) const;
-    std::vector<int> get_extruders_under_cli(bool conside_custom_gcode, DynamicPrintConfig& full_config) const;
+    std::vector<int> get_extruders(bool conside_custom_gcode, const DynamicPrintConfig& glb_config, const DynamicPrintConfig& project_config) const;
+    // expand_mixed_slots = false keeps mixed filament slots as slots instead of their components.
+    std::vector<int> get_extruders_under_cli(bool conside_custom_gcode, DynamicPrintConfig& full_config, bool expand_mixed_slots = true) const;
     std::vector<int> get_extruders_without_support(bool conside_custom_gcode = false) const;
     // get used filaments from gcode result, 1 based idx
     std::vector<int> get_used_filaments();
@@ -366,6 +373,8 @@ public:
     bool contain_instance_totally(ModelObject* object, int instance_id) const;
     //judge whether instance is totally included in plate or not
     bool contain_instance_totally(int obj_id, int instance_id) const;
+    //judge whether any of the object's instances is totally included in plate or not
+    bool contain_any_instance_totally(int obj_id) const;
 
     //judge whether the plate's origin is at the left of instance or not
     bool is_left_top_of(int obj_id, int instance_id);
diff --git a/src/slic3r/GUI/PartSkipDialog.cpp b/src/slic3r/GUI/PartSkipDialog.cpp
index b9dd7d5007..9bd6687757 100644
--- a/src/slic3r/GUI/PartSkipDialog.cpp
+++ b/src/slic3r/GUI/PartSkipDialog.cpp
@@ -1,5 +1,6 @@
 #include "GUI_Utils.hpp"
 #include "GUI_App.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include <wx/panel.h>
 #include <wx/bitmap.h>
 #include <wx/image.h>
diff --git a/src/slic3r/GUI/PhysicalPrinterDialog.cpp b/src/slic3r/GUI/PhysicalPrinterDialog.cpp
index 989cf204e1..04317ca46b 100644
--- a/src/slic3r/GUI/PhysicalPrinterDialog.cpp
+++ b/src/slic3r/GUI/PhysicalPrinterDialog.cpp
@@ -9,6 +9,7 @@
 #include <boost/regex.hpp>
 
 #include <wx/sizer.h>
+#include <wx/tooltip.h>
 #include <wx/stattext.h>
 #include <wx/textctrl.h>
 #include <wx/button.h>
diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp
index 2904f91866..30e1ae1313 100644
--- a/src/slic3r/GUI/Plater.cpp
+++ b/src/slic3r/GUI/Plater.cpp
@@ -1,12 +1,10 @@
 #include "Plater.hpp"
 #include "../Utils/NetworkAgent.hpp"
-#include "../Utils/NetworkAgentFactory.hpp"
 #include "libslic3r/Config.hpp"
 #include "libslic3r_version.h"
 
 #include <cstddef>
 #include <algorithm>
-#include <chrono>
 #include <numeric>
 #include <limits>
 #include <optional>
@@ -16,8 +14,6 @@
 #include <vector>
 #include <string>
 #include <regex>
-#include <future>
-#include <thread>
 #include <atomic>
 #include <mutex>
 #include <boost/algorithm/string.hpp>
@@ -69,7 +65,6 @@
 #include "libslic3r/Format/bbs_3mf.hpp"
 #include "libslic3r/GCode/ThumbnailData.hpp"
 #include "libslic3r/Model.hpp"
-#include "libslic3r/SLA/Hollowing.hpp"
 #include "libslic3r/SLA/SupportPoint.hpp"
 #include "libslic3r/SLA/ReprojectPointsOnMesh.hpp"
 #include "libslic3r/Polygon.hpp"
@@ -78,16 +73,15 @@
 #include "libslic3r/SLAPrint.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/PresetBundle.hpp"
+#include "libslic3r/PublishSettings.hpp"
 #include "slic3r/Utils/CrealityPrint.hpp"
 #include "libslic3r/ClipperUtils.hpp"
-#include "libslic3r/ObjColorUtils.hpp"
 // For stl export
 #include "libslic3r/CSGMesh/ModelToCSGMesh.hpp"
 #include "libslic3r/CSGMesh/PerformCSGMeshBooleans.hpp"
 
 #include "GUI.hpp"
 #include "GUI_App.hpp"
-#include "GuiColor.hpp"
 #include "GUI_ObjectList.hpp"
 #ifdef __WXGTK__
 #include "LinuxDisplayBackend.hpp"
@@ -126,7 +120,6 @@
 #include "SendMultiMachinePage.hpp"
 #include "SendToPrinter.hpp"
 #include "PublishDialog.hpp"
-#include "ModelMall.hpp"
 #include "ConfigWizard.hpp"
 #include "SyncAmsInfoDialog.hpp"
 #include "../Utils/ASCIIFolding.hpp"
@@ -152,7 +145,6 @@
 #include "ParamsDialog.hpp"
 #include "ImageDPIFrame.hpp"
 #include "Widgets/Label.hpp"
-#include "Widgets/RoundedRectangle.hpp"
 #include "Widgets/RadioGroup.hpp"
 #include "Widgets/CheckBox.hpp"
 #include "Widgets/Button.hpp"
@@ -3670,8 +3662,8 @@ void Sidebar::update_presets(Preset::Type preset_type)
                 // so extruders without an explicit sub-nozzle count never offer Hybrid. A nullable-int
                 // nil is INT_MAX (> 1) and would otherwise falsely pass the gate, so exclude it too.
                 if (boost::algorithm::contains(extruder_variants->values[index], type + " " + nozzle_volumes_def->enum_labels[i]) ||
-                    extruder_max_nozzle_count->get_at(index) > 1 && extruder_max_nozzle_count->get_at(index) != ConfigOptionIntsNullable::nil_value() &&
-                    nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]) == nvtHybrid) {
+                    (extruder_max_nozzle_count->get_at(index) > 1 && extruder_max_nozzle_count->get_at(index) != ConfigOptionIntsNullable::nil_value() &&
+                    nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]) == nvtHybrid)) {
                     if (nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]) == NozzleVolumeType::nvtHighFlow &&(diameter == "0.2" ||
                         is_skip_high_flow_printer(printer_model)))
                         continue;
@@ -6715,6 +6707,12 @@ struct Plater::priv
     SendToPrinterDialog* m_send_to_sdcard_dlg = nullptr;
     PublishDialog *m_publish_dlg = nullptr;
 
+    // Session-level stash of the last published selection. Written on publish and on
+    // loading a published 3MF; read when the Publish dialog is opened.
+    bool                                        m_has_pending_published{false};
+    std::vector<std::string>                    m_pending_published_keys;
+    std::vector<Slic3r::PublishedMaterialEntry> m_pending_material_keys;
+
     // Data
     Slic3r::DynamicPrintConfig *config;        // FIXME: leak?
     Slic3r::Print               fff_print;
@@ -6939,7 +6937,10 @@ struct Plater::priv
 
     // BBS: backup & restore
     using LoadProgressCallback = std::function<bool(int, const wxString&)>;
-    std::vector<size_t> load_files(const std::vector<fs::path>& input_files, LoadStrategy strategy, bool ask_multi = false);
+    std::vector<size_t> load_files(const std::vector<fs::path>& input_files,
+                                   LoadStrategy strategy,
+                                   bool ask_multi      = false,
+                                   bool* published_out = nullptr);
     std::vector<size_t> load_model_objects(const ModelObjectPtrs& model_objects, bool allow_negative_z = false, bool split_object = false, bool auto_drop = true);
 
     // Texture-to-color import: a mesh loaded with UVs + a texture map gets its faces clustered
@@ -6967,7 +6968,7 @@ struct Plater::priv
                                      std::function<bool()> cancel_callback = {});
 
     fs::path get_export_file_path(GUI::FileType file_type);
-    wxString get_export_file(GUI::FileType file_type);
+    wxString get_export_file(GUI::FileType file_type, const wxString& title = {}, bool published = false);
 
     // BBS
     void load_auxiliary_files();
@@ -8275,7 +8276,10 @@ void read_binary_stl(const std::string& filename, std::string& model_id, std::st
 }
 
 // BBS: backup & restore
-std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_files, LoadStrategy strategy, bool ask_multi)
+std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_files,
+                                             LoadStrategy strategy,
+                                             bool ask_multi,
+                                             bool* published_out)
 {
     std::vector<size_t> empty_result;
     bool dlg_cont = true;
@@ -8358,6 +8362,7 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
     const float INPUT_FILES_RATIO            = 0.7;
     const float INIT_MODEL_RATIO             = 0.75;
     const float CENTER_AROUND_ORIGIN_RATIO   = 0.8;
+
     const float LOAD_MODEL_RATIO             = 0.9;
 
     for (size_t i = 0; i < input_files.size(); ++i) {
@@ -8398,6 +8403,11 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                 DynamicPrintConfig config;
                 Semver             file_version;
                 En3mfType          en_3mf_file_type = En3mfType::From_BBS;
+                // BBS: a "published" 3MF carries a flag plus the author-selected setting keys;
+                // on load keep the user's current presets and overlay only those keys. Declared
+                // here (outside the config block below) so it stays alive for the embedded-preset
+                // gate, the metadata strip and the preset overlay after the block closes.
+                PublishedConfig published_config;
                 {
                     DynamicPrintConfig config_loaded;
 
@@ -8425,6 +8435,107 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                                       << boost::format(", plate_data.size %1%, project_preset.size %2%, is_bbs_or_orca_3mf %3%, file_version %4% \n") % plate_data.size() %
                                           project_presets.size() % (en_3mf_file_type == En3mfType::From_BBS || en_3mf_file_type == En3mfType::From_Orca) % file_version.to_string();
 
+                    // BBS: a "published" 3MF carries a flag plus the author-selected setting keys;
+                    // on load keep the user's current presets and overlay only those keys. Parsed
+                    // here (before the version/fallback chain below) because a published file has
+                    // no project_settings.config: its values travel in the published_config
+                    // metadata payload, which must fill config_loaded before the chain decides
+                    // whether to import geometry only.
+                    if (model.model_info != nullptr) {
+                        auto published_it = model.model_info->metadata_items.find(ORCA_PUBLISHED_TAG);
+                        if (published_it != model.model_info->metadata_items.end() && is_published_3mf_flag(published_it->second)) {
+                            published_config.published = true;
+                            auto keys_it               = model.model_info->metadata_items.find(ORCA_PUBLISHED_KEYS_TAG);
+                            if (keys_it != model.model_info->metadata_items.end()) {
+                                try {
+                                    auto j = nlohmann::json::parse(keys_it->second);
+                                    if (j.is_array())
+                                        for (const auto& k : j)
+                                            if (k.is_string())
+                                                published_config.published_keys.emplace_back(k.get<std::string>());
+                                } catch (...) {
+                                    // Ignore malformed published_keys; the project still loads normally.
+                                }
+                            }
+
+                            auto material_keys_it = model.model_info->metadata_items.find(ORCA_PUBLISHED_MATERIAL_TAG);
+                            if (material_keys_it != model.model_info->metadata_items.end()) {
+                                try {
+                                    auto jm = nlohmann::json::parse(material_keys_it->second);
+                                    if (jm.is_array())
+                                        for (const auto& m : jm) {
+                                            try {
+                                                // Malformed entries are isolated so one bad item
+                                                // cannot discard valid entries that follow it.
+                                                if (!m.is_object())
+                                                    continue;
+                                                PublishedMaterialEntry entry;
+                                                const auto mat_it = m.find("material");
+                                                if (mat_it != m.end() && mat_it->is_object()) {
+                                                    const auto& mat = *mat_it;
+                                                    if (mat.contains("filament_type") && mat["filament_type"].is_string())
+                                                        entry.filament_type = mat["filament_type"].get<std::string>();
+                                                    if (mat.contains("filament_vendor") && mat["filament_vendor"].is_string())
+                                                        entry.filament_vendor = mat["filament_vendor"].get<std::string>();
+                                                    if (mat.contains("filament_id") && mat["filament_id"].is_string())
+                                                        entry.filament_id = mat["filament_id"].get<std::string>();
+                                                    if (mat.contains("setting_id") && mat["setting_id"].is_string())
+                                                        entry.setting_id = mat["setting_id"].get<std::string>();
+                                                    if (mat.contains("name") && mat["name"].is_string())
+                                                        entry.preset_name = mat["name"].get<std::string>();
+                                                }
+                                                if (m.contains("slot") && m["slot"].is_number_integer())
+                                                    entry.slot = m["slot"].get<int>();
+                                                const auto entry_keys_it = m.find("keys");
+                                                if (entry_keys_it != m.end() && entry_keys_it->is_array())
+                                                    for (const auto& k : *entry_keys_it)
+                                                        if (k.is_string())
+                                                            entry.keys.emplace_back(k.get<std::string>());
+                                                // Fields always written by the current exporter.
+                                                if (m.contains("full") && m["full"].is_boolean())
+                                                    entry.full = m["full"].get<bool>();
+                                                const auto entry_full_keys_it = m.find("full_keys");
+                                                if (entry_full_keys_it != m.end() && entry_full_keys_it->is_array())
+                                                    for (const auto& k : *entry_full_keys_it)
+                                                        if (k.is_string())
+                                                            entry.full_keys.emplace_back(k.get<std::string>());
+                                                if (m.contains("publish_type") && m["publish_type"].is_boolean())
+                                                    entry.publish_type = m["publish_type"].get<bool>();
+                                                if (m.contains("type") && m["type"].is_string())
+                                                    entry.publish_type_value = m["type"].get<std::string>();
+                                                if (m.contains("publish_color") && m["publish_color"].is_boolean())
+                                                    entry.publish_color = m["publish_color"].get<bool>();
+                                                if (m.contains("color") && m["color"].is_string())
+                                                    entry.color = m["color"].get<std::string>();
+                                                published_config.material_keys.emplace_back(std::move(entry));
+                                            } catch (const nlohmann::json::exception&) {
+                                                // Ignore only this malformed material entry.
+                                            }
+                                        }
+                                } catch (const nlohmann::json::exception&) {
+                                    // Ignore malformed published_material_keys; the project still loads normally.
+                                }
+                            }
+
+                            // Rebuild the published values from the metadata payload: a published
+                            // file carries no project_settings.config, so config_loaded is filled
+                            // from here; a missing or malformed payload leaves it empty and the
+                            // fallback chain below imports the geometry only.
+                            auto payload_it = model.model_info->metadata_items.find(ORCA_PUBLISHED_CONFIG_TAG);
+                            if (payload_it != model.model_info->metadata_items.end()) {
+                                try {
+                                    ConfigSubstitutions payload_substitutions =
+                                        config_loaded.load_from_ini_string(payload_it->second, ForwardCompatibilitySubstitutionRule::Enable);
+                                    config_substitutions.substitutions.insert(config_substitutions.substitutions.end(),
+                                                                              std::make_move_iterator(payload_substitutions.begin()),
+                                                                              std::make_move_iterator(payload_substitutions.end()));
+                                } catch (...) {
+                                    // Ignore malformed published_config; the project still loads normally.
+                                }
+                            }
+                        }
+                    }
+
                     // 1. add extruder for prusa model if the number of existing extruders is not enough
                     // 2. add extruder for BBS or Other model if only import geometry
                     if (en_3mf_file_type == En3mfType::From_Prusa || (load_model && !load_config)) {
@@ -8588,7 +8699,7 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                                     text += "\n";
                                     log_and_show_3mf_info(text, bambu_project_title);
                                 }
-                            } else if (load_config) {
+                            } else if (load_config && !published_config.published) {
                                 // BambuStudio version is older or same as our SLIC3R_VERSION
                                 wxString text = _L("The 3MF was created by BambuStudio. Some settings may differ from OrcaSlicer.");
                                 log_and_show_3mf_info(text, bambu_project_title);
@@ -8648,7 +8759,9 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                         }
 
                         Semver old_version(1, 5, 9);
-                        if ((en_3mf_file_type == En3mfType::From_BBS || en_3mf_file_type == En3mfType::From_Orca) && (file_version < old_version) && load_model && load_config && !config_loaded.empty()) {
+                        // A published 3MF has no project config to migrate: skip the old-version
+                        // translations even if a slicer tag slipped through classification.
+                        if ((en_3mf_file_type == En3mfType::From_BBS || en_3mf_file_type == En3mfType::From_Orca) && (file_version < old_version) && !published_config.published && load_model && load_config && !config_loaded.empty()) {
                             translate_old = true;
                             partplate_list.get_plate_size(current_width, current_depth, current_height);
                         }
@@ -8670,8 +8783,10 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                         }
                     }
 
-                    // BBS:: project embedded presets
-                    if ((project_presets.size() > 0) && load_config) {
+                    // BBS:: project embedded presets (skipped for published projects: the author's
+                    // embedded presets must not pollute the receiver's library, the overlay applies
+                    // the published keys to the receiver's own presets instead).
+                    if ((project_presets.size() > 0) && load_config && !published_config.published) {
                         // load project embedded presets
                         PresetsConfigSubstitutions preset_substitutions;
                         PresetBundle &             preset_bundle = *wxGetApp().preset_bundle;
@@ -8727,6 +8842,19 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                     }
                 }
 
+                // BBS: a "published" 3MF loads as a new project: its path must not become the
+                // project filename (Save/Ctrl-S would overwrite the shared file), and the
+                // published metadata is consumed above and stripped so a later save is a normal
+                // unpublished 3MF.
+                if (published_out != nullptr && published_config.published)
+                    *published_out = true;
+                if (published_config.published && load_config && this->model.model_info != nullptr) {
+                    this->model.model_info->metadata_items.erase(ORCA_PUBLISHED_TAG);
+                    this->model.model_info->metadata_items.erase(ORCA_PUBLISHED_KEYS_TAG);
+                    this->model.model_info->metadata_items.erase(ORCA_PUBLISHED_MATERIAL_TAG);
+                    this->model.model_info->metadata_items.erase(ORCA_PUBLISHED_CONFIG_TAG);
+                }
+
                 if (load_config) {
                     if (!config.empty()) {
                         Preset::normalize(config);
@@ -8735,7 +8863,7 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                         {
                             // BBS: modify the prime tower params for old version file
                             Semver old_version3(2, 0, 0);
-                            if ((en_3mf_file_type == En3mfType::From_BBS || en_3mf_file_type == En3mfType::From_Orca) && file_version < old_version3) {
+                            if ((en_3mf_file_type == En3mfType::From_BBS || en_3mf_file_type == En3mfType::From_Orca) && !published_config.published && file_version < old_version3) {
                                 double old_filament_prime_volume = 0.;
                                 int    filament_count            = 0;
                                 {
@@ -8785,7 +8913,7 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                         }
 
                         auto choise = wxGetApp().app_config->get("no_warn_when_modified_gcodes");
-                        if (choise.empty() || choise != "true") {
+                        if (!published_config.published && (choise.empty() || choise != "true")) {
                             // BBS: first validate the printer
                             // validate the system profiles
                             std::set<std::string> modified_gcodes;
@@ -8830,12 +8958,56 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                             if (wipe_tower_y_opt)
                                 file_wipe_tower_y = *wipe_tower_y_opt;
 
+                            // Convert the printer's filament ids to Orca ids before loading.
                             if (auto* agent = wxGetApp().getAgent()) {
                                 if (auto* ids = config.opt<ConfigOptionStrings>("filament_ids"))
                                     for (std::string& id : ids->values)
                                         id = agent->to_orca_filament_id(id);
                             }
-                            preset_bundle->load_config_model(filename.string(), std::move(config), file_version);
+                            preset_bundle->load_config_model(filename.string(), std::move(config), file_version, &published_config);
+
+                            // Mixed-filament definitions that collided with one of the
+                            // receiver's real slots were relocated during the preset load.
+                            // Re-point the freshly parsed model's extruder references and
+                            // color painting from the author's slot numbers to where each
+                            // definition landed, so volumes colored with a mix follow it.
+                            // Runs before the objects are handed over to the plater below.
+                            if (load_model && !published_config.mixed_slot_relocations.empty())
+                                Slic3r::remap_model_filament_slots(model, published_config.mixed_slot_relocations);
+
+                            // BBS: notify the user about published settings that could not be applied.
+                            if (!published_config.skipped_keys.empty()) {
+                                NotificationManager* notify_manager = q->get_notification_manager();
+                                std::string message                 = _u8L("Some published settings could not be applied:");
+                                for (const std::string& key : published_config.skipped_keys)
+                                    message += "\n-" + key;
+                                // Informational: the load succeeded, these keys were skipped.
+                                notify_manager
+                                    ->bbl_show_3mf_warn_notification(message,
+                                                                     NotificationManager::NotificationLevel::WarningNotificationLevel);
+                            }
+
+                            // BBS: notify the user about slot materials that were replaced while
+                            // loading a published project (type mismatch / no same-type match).
+                            if (!published_config.material_replacements.empty()) {
+                                NotificationManager* notify_manager = q->get_notification_manager();
+                                std::string message                 = _u8L("Some filament slots were changed:");
+                                for (const std::string& replacement : published_config.material_replacements)
+                                    message += "\n-" + replacement;
+                                // Informational: the load succeeded, the slots were adapted.
+                                notify_manager
+                                    ->bbl_show_3mf_warn_notification(message,
+                                                                     NotificationManager::NotificationLevel::WarningNotificationLevel);
+                            }
+
+                            // Remember the imported published selection so the Publish dialog is
+                            // pre-seeded with the file's settings. Stored after the load so any
+                            // per-slot relocations are already reflected in material_keys.
+                            if (published_config.published) {
+                                this->m_has_pending_published = true;
+                                this->m_pending_published_keys = published_config.published_keys;
+                                this->m_pending_material_keys  = published_config.material_keys;
+                            }
 
                             ConfigOption* bed_type_opt = preset_bundle->project_config.option("curr_bed_type");
                             if (bed_type_opt != nullptr) {
@@ -8976,7 +9148,13 @@ std::vector<size_t> Plater::priv::load_files(const std::vector<fs::path>& input_
                                     dynamic_map->value = false;
                             }
                             // Update filament combobox after loading config
-                            wxGetApp().plater()->sidebar().update_presets(Preset::TYPE_FILAMENT);
+                            if (published_config.published) {
+                                q->update_filament_colors_in_full_config();
+                                wxGetApp().plater()->sidebar().update_all_preset_comboboxes();
+                                wxGetApp().plater()->sidebar().update_dynamic_filament_list();
+                            } else {
+                                wxGetApp().plater()->sidebar().update_presets(Preset::TYPE_FILAMENT);
+                            }
                             // The loaded project supplies nozzle_volume_type; refresh the sidebar
                             // nozzle-count badges against it.
                             if (auto *nozzle_volumes = wxGetApp().preset_bundle->project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type")) {
@@ -9744,7 +9922,7 @@ fs::path Plater::priv::get_export_file_path(GUI::FileType file_type)
     return output_file;
 }
 
-wxString Plater::priv::get_export_file(GUI::FileType file_type)
+wxString Plater::priv::get_export_file(GUI::FileType file_type, const wxString& title, bool published)
 {
     wxString wildcard;
     switch (file_type) {
@@ -9786,8 +9964,11 @@ wxString Plater::priv::get_export_file(GUI::FileType file_type)
         }
         case FT_3MF:
         {
-            output_file.replace_extension("3mf");
-            dlg_title = _L("Save file as");
+        // A published export is suggested as "<name>.published.3mf" so the role is visible in the
+        // dialog and in the recent-files list. This is only a pre-filled suggestion; the user's
+        // typed filename wins, keeping a plain ".3mf" output fully valid.
+        output_file.replace_extension(published ? "published.3mf" : "3mf");
+        dlg_title = title.empty() ? _L("Save file as") : title;
             break;
         }
         case FT_OBJ:
@@ -10025,6 +10206,11 @@ void Plater::priv::reset(bool apply_presets_change)
 
     clear_warnings();
 
+    // A new project must not inherit the previous project's published selection (Feature A/B).
+    m_has_pending_published   = false;
+    m_pending_published_keys.clear();
+    m_pending_material_keys.clear();
+
     set_project_filename("");
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << " call set_project_filename: empty";
 
@@ -15148,14 +15334,15 @@ void Plater::load_project(wxString const& filename2,
     if (strategy & LoadStrategy::Restore)
         input_paths.push_back(into_u8(originfile));
 
-    std::vector<size_t> res = load_files(input_paths, strategy);
+    bool loaded_published   = false;
+    std::vector<size_t> res = load_files(input_paths, strategy, false, &loaded_published);
 
     reset_project_dirty_initial_presets();
     update_project_dirty_from_presets();
     wxGetApp().preset_bundle->export_selections(*wxGetApp().app_config);
 
     // if res is empty no data has been loaded
-    if (!res.empty() && (load_restore || !(strategy & LoadStrategy::Silence))) {
+    if (!res.empty() && !loaded_published && (load_restore || !(strategy & LoadStrategy::Silence))) {
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << " call set_project_filename: " << (load_restore ? originfile : filename);
         p->set_project_filename(load_restore ? originfile : filename);
         if (load_restore && originfile.IsEmpty()) {
@@ -15166,6 +15353,15 @@ void Plater::load_project(wxString const& filename2,
         if (using_exported_file()) {
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << " using ecported set project filename: " << filename;
             p->set_project_filename(filename);
+        } else if (loaded_published && !res.empty()) {
+            // A "published" 3MF loads as a new project: its path must not become the project
+            // filename (Save/Ctrl-S prompts for a destination instead of overwriting it);
+            // reset() already cleared the project name, so restore the default title and keep
+            // the file in recents. Only on a successful load (res not empty): a failed or
+            // cancelled load must not pollute "Recently opened".
+            p->set_project_name(_L("Untitled"));
+            if (!filename.IsEmpty())
+                wxGetApp().mainframe->add_to_recent_projects(filename);
         }
 
     }
@@ -15607,6 +15803,7 @@ void Plater::calib_pa(const Calib_Params& params)
     auto printer_config = &wxGetApp().preset_bundle->printers.get_edited_preset().config;
     print_config->set_key_value("overhang_reverse", new ConfigOptionBool(false));
     print_config->set_key_value("precise_z_height", new ConfigOptionBool(false));
+    print_config->set_key_value("wipe_inward", new ConfigOptionBool(false));
     printer_config->set_key_value("resonance_avoidance", new ConfigOptionBool{false});
     switch (params.mode) {
         case CalibMode::Calib_PA_Line:
@@ -16292,6 +16489,7 @@ void Plater::calib_retraction(const Calib_Params& params)
     auto obj = model().objects[0];
 
     print_config->set_key_value("enable_wrapping_detection", new ConfigOptionBool(false));
+    print_config->set_key_value("wipe_inward", new ConfigOptionBool(false));
 
     float nozzle_diameter = printer_config->option<ConfigOptionFloats>("nozzle_diameter")->get_at(0);
     float layer_height;
@@ -16827,22 +17025,12 @@ void Plater::force_update_all_plate_thumbnails()
 }
 
 // BBS: backup
-std::vector<size_t> Plater::load_files(const std::vector<fs::path>& input_files, LoadStrategy strategy, bool ask_multi) {
+std::vector<size_t> Plater::load_files(const std::vector<fs::path>& input_files, LoadStrategy strategy, bool ask_multi, bool* published_out) {
     //BBS: wish to reset state when load a new file
     p->m_slice_all_only_has_gcode = false;
     //BBS: wish to reset all plates stats item selected state when load a new file
     p->preview->get_canvas3d()->reset_select_plate_toolbar_selection();
-    return p->load_files(input_files, strategy, ask_multi);
-}
-
-// To be called when providing a list of files to the GUI slic3r on command line.
-std::vector<size_t> Plater::load_files(const std::vector<std::string>& input_files, LoadStrategy strategy,  bool ask_multi)
-{
-    std::vector<fs::path> paths;
-    paths.reserve(input_files.size());
-    for (const std::string& path : input_files)
-        paths.emplace_back(path);
-    return p->load_files(paths, strategy, ask_multi);
+    return p->load_files(input_files, strategy, ask_multi, published_out);
 }
 
 bool Plater::preview_zip_archive(const boost::filesystem::path& archive_path)
@@ -17701,6 +17889,10 @@ void Plater::increase_instances(size_t num)
         model_object->add_instance(offset_vec, model_instance->get_scaling_factor(), model_instance->get_rotation(), model_instance->get_mirror());
 //        p->print.get_object(obj_idx)->add_copy(Slic3r::to_2d(offset_vec));
     }
+    // Register the copies with the plate they land on before the scene reloads: the plate's
+    // filament list and wipe tower preview are read from that registry.
+    for (size_t i = model_object->instances.size() - num; i < model_object->instances.size(); ++i)
+        p->partplate_list.notify_instance_update(obj_idx, static_cast<int>(i));
 
 #ifdef SUPPORT_AUTO_CENTER
     if (p->get_config("autocenter") == "true")
@@ -17731,8 +17923,10 @@ void Plater::decrease_instances(size_t num)
 
     ModelObject* model_object = p->model.objects[obj_idx];
     if (model_object->instances.size() > num) {
-        for (size_t i = 0; i < num; ++ i)
+        for (size_t i = 0; i < num; ++ i) {
+            p->partplate_list.notify_instance_removed(obj_idx, static_cast<int>(model_object->instances.size()) - 1);
             model_object->delete_last_instance();
+        }
         p->update();
         // Delete object from Sidebar list. Do it after update, so that the GLScene selection is updated with the modified model.
         sidebar().obj_list()->decrease_object_instances(obj_idx, num);
@@ -18071,7 +18265,6 @@ void Plater::send_gcode_finish(wxString name)
     auto out_str = GUI::format(_L("The file %s has been sent to the printer's storage space and can be viewed on the printer."), name);
     p->notification_manager->push_exporting_finished_notification(out_str, "", false);
 }
-
 void Plater::export_core_3mf()
 {
     wxString path = p->get_export_file(FT_3MF);
@@ -18080,6 +18273,182 @@ void Plater::export_core_3mf()
     export_3mf(path_u8, SaveStrategy::Silence);
 }
 
+// Export the current project as a "published" 3MF: a pure export that never touches the
+// project's file name, dirty state, backup path or title, and attaches the published metadata
+// to the model only for the duration of the export (a later Save Project is a normal 3MF).
+int Plater::export_published_3mf(const std::vector<std::string>& published_keys,
+                                 const std::vector<Slic3r::PublishedMaterialEntry>& material_keys)
+{
+    wxString path = p->get_export_file(FT_3MF, _L("Publish 3MF file as:"), true);
+    if (path.empty() || path == "<cancel>")
+        return wxID_CANCEL;
+
+    nlohmann::json j = nlohmann::json::array();
+    for (const std::string& key : published_keys)
+        j.push_back(key);
+    nlohmann::json jm = nlohmann::json::array();
+    for (const Slic3r::PublishedMaterialEntry& e : material_keys)
+        jm.push_back({{"material",
+                       {{"filament_type", e.filament_type},
+                        {"filament_vendor", e.filament_vendor},
+                        {"filament_id", e.filament_id},
+                        {"setting_id", e.setting_id},
+                        {"name", e.preset_name}}},
+                      {"slot", e.slot},
+                      {"keys", e.keys},
+                      {"full", e.full},
+                      {"full_keys", e.full_keys},
+                      {"publish_type", e.publish_type},
+                      {"type", e.publish_type_value},
+                      {"publish_color", e.publish_color},
+                      {"color", e.color}});
+
+    Model& model = this->model();
+    // Save the previous metadata so it can be restored after the export, keeping the in-memory
+    // project pristine (the published flag lives only in the exported file).
+    const bool had_model_info     = (model.model_info != nullptr);
+    const bool had_published      = had_model_info &&
+                                    (model.model_info->metadata_items.find(ORCA_PUBLISHED_TAG) != model.model_info->metadata_items.end());
+    const bool had_published_keys = had_model_info && (model.model_info->metadata_items.find(ORCA_PUBLISHED_KEYS_TAG) !=
+                                                       model.model_info->metadata_items.end());
+    const bool had_material_keys  = had_model_info && (model.model_info->metadata_items.find(ORCA_PUBLISHED_MATERIAL_TAG) !=
+                                                       model.model_info->metadata_items.end());
+    const bool had_payload = had_model_info &&
+                             (model.model_info->metadata_items.find(ORCA_PUBLISHED_CONFIG_TAG) != model.model_info->metadata_items.end());
+    const std::string prev_published      = had_published ? model.model_info->metadata_items.at(ORCA_PUBLISHED_TAG) : std::string();
+    const std::string prev_published_keys = had_published_keys ? model.model_info->metadata_items.at(ORCA_PUBLISHED_KEYS_TAG) :
+                                                                 std::string();
+    const std::string prev_material_keys  = had_material_keys ? model.model_info->metadata_items.at(ORCA_PUBLISHED_MATERIAL_TAG) :
+                                                                std::string();
+    const std::string prev_payload        = had_payload ? model.model_info->metadata_items.at(ORCA_PUBLISHED_CONFIG_TAG) : std::string();
+
+    // export_3mf() assigns archive paths to previously unsaved SVGs. Preserve those fields too,
+    // otherwise a publish changes what a later normal project save writes.
+    std::vector<std::pair<std::string*, std::string>> previous_svg_paths;
+    for (ModelObject* object : model.objects)
+        for (ModelVolume* volume : object->volumes)
+            if (volume != nullptr && volume->emboss_shape.has_value() && volume->emboss_shape->svg_file.has_value()) {
+                std::string* path_in_3mf = &volume->emboss_shape->svg_file->path_in_3mf;
+                previous_svg_paths.emplace_back(path_in_3mf, *path_in_3mf);
+            }
+
+    auto restore_temporary_state = [&]() {
+        for (const auto& [path_in_3mf, previous_path] : previous_svg_paths)
+            *path_in_3mf = previous_path;
+
+        if (!had_model_info) {
+            model.model_info = nullptr;
+        } else {
+            if (had_published)
+                model.model_info->metadata_items[ORCA_PUBLISHED_TAG] = prev_published;
+            else
+                model.model_info->metadata_items.erase(ORCA_PUBLISHED_TAG);
+            if (had_published_keys)
+                model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] = prev_published_keys;
+            else
+                model.model_info->metadata_items.erase(ORCA_PUBLISHED_KEYS_TAG);
+            if (had_material_keys)
+                model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] = prev_material_keys;
+            else
+                model.model_info->metadata_items.erase(ORCA_PUBLISHED_MATERIAL_TAG);
+            if (had_payload)
+                model.model_info->metadata_items[ORCA_PUBLISHED_CONFIG_TAG] = prev_payload;
+            else
+                model.model_info->metadata_items.erase(ORCA_PUBLISHED_CONFIG_TAG);
+        }
+    };
+    bool state_restored = false;
+    auto restore_now    = [&]() {
+        if (state_restored)
+            return;
+        restore_temporary_state();
+        state_restored = true;
+    };
+    ScopeGuard restore_guard(restore_now);
+
+    if (model.model_info == nullptr)
+        model.model_info = std::make_shared<ModelInfo>();
+    model.model_info->metadata_items[ORCA_PUBLISHED_TAG]          = "1";
+    model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG]     = j.dump();
+    model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] = jm.dump();
+
+    int ret = -1;
+    try {
+        // Minimal published export: filter full_config to the published keys, material keys,
+        // identity fields and plate geometry keys, and omit the project config file, the
+        // project-embedded preset dumps and the OrcaSlicer version tag from the archive. The
+        // filtered values are serialized into the published_config metadata payload instead, so
+        // OrcaSlicer versions without the publish feature fall back to importing the geometry only
+        // (keeping the receiver's presets) while new versions rebuild the config from the payload.
+        DynamicPrintConfig full_cfg     = wxGetApp().preset_bundle->full_config_secure();
+        DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, published_keys, material_keys);
+        std::string payload;
+        for (const std::string& key : filtered_cfg.keys()) {
+            // A value containing a newline would break the INI written below (read_ini throws),
+            // so load_from_ini_string discards the whole settings block on import. Skip such
+            // keys instead of silently dropping every setting.
+            std::string value = filtered_cfg.opt_serialize(key);
+            if (value.find('\n') != std::string::npos) {
+                BOOST_LOG_TRIVIAL(warning) << "publish: dropping key \"" << key
+                                           << "\" from the published payload (value contains a newline)";
+                continue;
+            }
+            payload += key + " = " + value + "\n";
+        }
+        model.model_info->metadata_items[ORCA_PUBLISHED_CONFIG_TAG] = std::move(payload);
+
+        // Same file layout as save_project(), plus Silence (so export_3mf does not set the project
+        // filename on success, keeping this a pure export like export_core_3mf()) and MinimalPublished.
+        auto save_strategy  = SaveStrategy::SplitModel | SaveStrategy::ShareMesh | SaveStrategy::Silence | SaveStrategy::MinimalPublished;
+        bool full_pathnames = wxGetApp().app_config->get_bool("export_sources_full_pathnames");
+        if (full_pathnames)
+            save_strategy = save_strategy | SaveStrategy::FullPathSources;
+        ret = export_3mf(into_path(path), save_strategy, -1, nullptr);
+    } catch (...) {
+        restore_now();
+        MessageDialog(this,
+                      _L("Failed to export the published 3MF file.\nPlease check whether the folder exists online or if other programs "
+                         "have the file open."),
+                      _L("Publish"), wxOK | wxICON_WARNING)
+            .ShowModal();
+        return wxID_CANCEL;
+    }
+
+    if (ret < 0) {
+        restore_now();
+        MessageDialog(this,
+                      _L("Failed to export the published 3MF file.\nPlease check whether the folder exists online or if other programs "
+                         "have the file open."),
+                      _L("Publish"), wxOK | wxICON_WARNING)
+            .ShowModal();
+        return wxID_CANCEL;
+    }
+    restore_now();
+
+    // Register the exported file in the "Recently opened" list
+    wxGetApp().mainframe->add_to_recent_projects(path);
+
+    return wxID_YES;
+}
+
+bool Plater::get_pending_published(std::vector<std::string>& out_keys,
+                                   std::vector<Slic3r::PublishedMaterialEntry>& out_material) const
+{
+    if (!p->m_has_pending_published)
+        return false;
+    out_keys     = p->m_pending_published_keys;
+    out_material = p->m_pending_material_keys;
+    return true;
+}
+
+void Plater::set_pending_published(const std::vector<std::string>& published_keys,
+                                   const std::vector<Slic3r::PublishedMaterialEntry>& material_keys)
+{
+    p->m_has_pending_published = true;
+    p->m_pending_published_keys = published_keys;
+    p->m_pending_material_keys  = material_keys;
+}
+
 Preset *get_printer_preset(const MachineObject *obj)
 {
     if (!obj)
diff --git a/src/slic3r/GUI/Plater.hpp b/src/slic3r/GUI/Plater.hpp
index 5308deec61..84e64acea0 100644
--- a/src/slic3r/GUI/Plater.hpp
+++ b/src/slic3r/GUI/Plater.hpp
@@ -42,6 +42,7 @@ class Button;
 namespace Slic3r {
 
 class BuildVolume;
+class MachineObject;
 enum class BuildVolume_Type : char;
 class Model;
 class ModelObject;
@@ -407,9 +408,7 @@ public:
     bool preview_zip_archive(const boost::filesystem::path& archive_path);
 
     // BBS: restore
-    std::vector<size_t> load_files(const std::vector<boost::filesystem::path>& input_files, LoadStrategy strategy = LoadStrategy::LoadModel | LoadStrategy::LoadConfig,  bool ask_multi = false);
-    // To be called when providing a list of files to the GUI slic3r on command line.
-    std::vector<size_t> load_files(const std::vector<std::string>& input_files, LoadStrategy strategy = LoadStrategy::LoadModel | LoadStrategy::LoadConfig,  bool ask_multi = false);
+    std::vector<size_t> load_files(const std::vector<boost::filesystem::path>& input_files, LoadStrategy strategy = LoadStrategy::LoadModel | LoadStrategy::LoadConfig,  bool ask_multi = false, bool* published_out = nullptr);
     // to be called on drag and drop
     bool load_files(const wxArrayString& filenames);
 
@@ -519,6 +518,13 @@ public:
     void export_gcode_3mf(bool export_all = false);
     void send_gcode_finish(wxString name);
     void export_core_3mf();
+    // Export a "published" 3MF embedding the author-selected settings in the file metadata; a
+    // pure export that leaves the in-memory project untouched.
+    int  export_published_3mf(const std::vector<std::string>& published_keys, const std::vector<Slic3r::PublishedMaterialEntry>& material_keys);
+    // Session-level stash of the last published selection, seeded into the Publish dialog on
+    // open and written on publish or on loading a published 3MF
+    bool get_pending_published(std::vector<std::string>& out_keys, std::vector<Slic3r::PublishedMaterialEntry>& out_material) const;
+    void set_pending_published(const std::vector<std::string>& published_keys, const std::vector<Slic3r::PublishedMaterialEntry>& material_keys);
     static TriangleMesh combine_mesh_fff(const ModelObject& mo, int instance_id, std::function<void(const std::string&)> notify_func = {});
     void export_stl(bool extended = false, bool selection_only = false, bool multi_stls = false, FileType file_type = FT_STL);
     //BBS: remove amf
diff --git a/src/slic3r/GUI/PluginPickerDialog.cpp b/src/slic3r/GUI/PluginPickerDialog.cpp
index d0c387b0c0..5109b3b483 100644
--- a/src/slic3r/GUI/PluginPickerDialog.cpp
+++ b/src/slic3r/GUI/PluginPickerDialog.cpp
@@ -9,14 +9,17 @@
 #include "GUI.hpp"
 #include "I18N.hpp"
 
+#include "GUI_App.hpp"
+
+#include "Widgets/DialogButtons.hpp"
+
 namespace Slic3r { namespace GUI {
 
 PluginPickerDialog::PluginPickerDialog(wxWindow* parent,
                                        const wxString& plugin_type_label,
                                        const std::vector<Slic3r::PluginDescriptor>& plugins)
-    : wxDialog(parent, wxID_ANY, wxString::Format(_L("Select %s Plugin"), plugin_type_label))
+    : DPIDialog(parent, wxID_ANY, wxString::Format(_L("Select %s Plugin"), plugin_type_label))
     , m_plugins(plugins)
-    , m_capability_mode(false)
 {
     build_ui(plugin_type_label);
     CentreOnParent();
@@ -25,9 +28,8 @@ PluginPickerDialog::PluginPickerDialog(wxWindow* parent,
 PluginPickerDialog::PluginPickerDialog(wxWindow* parent,
                                        const wxString& plugin_type_label,
                                        std::vector<CapabilityEntry> capabilities)
-    : wxDialog(parent, wxID_ANY, wxString::Format(_L("Select %s Plugin"), plugin_type_label))
+    : DPIDialog(parent, wxID_ANY, wxString::Format(_L("Select %s Plugin"), plugin_type_label))
     , m_capabilities(std::move(capabilities))
-    , m_capability_mode(true)
 {
     build_capability_ui(plugin_type_label);
     CentreOnParent();
@@ -35,12 +37,18 @@ PluginPickerDialog::PluginPickerDialog(wxWindow* parent,
 
 void PluginPickerDialog::build_ui(const wxString& plugin_type_label)
 {
+    SetBackgroundColour(*wxWHITE);
+
     const bool has_plugins = !m_plugins.empty();
 
     auto* top_sizer = new wxBoxSizer(wxVERTICAL);
     auto* info_text = new wxStaticText(this, wxID_ANY,
         wxString::Format(_L("Choose a %s plugin from the list below."), plugin_type_label));
-    top_sizer->Add(info_text, 0, wxALL | wxEXPAND, 10);
+    info_text->SetFont(Label::Body_14);
+    info_text->SetForegroundColour(wxColour("#363636"));
+    top_sizer->Add(info_text, 0, wxALL | wxEXPAND, FromDIP(10));
+
+    top_sizer->AddSpacer(FromDIP(5));
 
     wxArrayString choices;
     choices.reserve(m_plugins.size());
@@ -51,84 +59,103 @@ void PluginPickerDialog::build_ui(const wxString& plugin_type_label)
         choices.Add(label);
     }
 
-    m_choice = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
+    m_choice = new ComboBox(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0, NULL, wxCB_READONLY);
+    for (const wxString &opt : choices) { m_choice->Append(opt); }
+
     if (has_plugins) {
         m_choice->SetSelection(0);
-        m_choice->Bind(wxEVT_CHOICE, [this](wxCommandEvent& evt) {
+        m_choice->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent& evt) {
             update_description(evt.GetSelection());
         });
     } else {
         m_choice->Enable(false);
     }
 
-    top_sizer->Add(m_choice, 0, wxLEFT | wxRIGHT | wxEXPAND, 10);
+    top_sizer->Add(m_choice, 0, wxLEFT | wxRIGHT | wxEXPAND, FromDIP(10));
 
     m_description = new wxStaticText(this, wxID_ANY, wxEmptyString);
+    m_description->SetFont(Label::Body_14);
+    m_description->SetForegroundColour(wxColour("#363636"));
     m_description->Wrap(400);
-    top_sizer->Add(m_description, 0, wxALL | wxEXPAND, 10);
+    top_sizer->Add(m_description, 0, wxALL | wxEXPAND, FromDIP(10));
 
     if (has_plugins)
         update_description(0);
     else
         m_description->SetLabel(_L("No plugins found for this type."));
 
-    auto* button_sizer = new wxStdDialogButtonSizer();
-    auto* ok_button = new wxButton(this, wxID_OK);
-    ok_button->Enable(has_plugins);
-    button_sizer->AddButton(ok_button);
-    button_sizer->AddButton(new wxButton(this, wxID_CANCEL));
-    button_sizer->Realize();
+    auto dlg_btns = new DialogButtons(this, {"OK", "Cancel"});
 
-    top_sizer->Add(button_sizer, 0, wxALL | wxALIGN_RIGHT, 10);
+    dlg_btns->GetOK()->Bind(wxEVT_BUTTON, [this](wxCommandEvent &e) { EndModal(wxID_OK); });
+    dlg_btns->GetOK()->Enable(has_plugins);
+
+    dlg_btns->GetCANCEL()->Bind(wxEVT_BUTTON, [this](wxCommandEvent &e) { EndModal(wxID_CANCEL); });
+
+    top_sizer->Add(dlg_btns, 0, wxEXPAND);
 
     SetSizerAndFit(top_sizer);
+
+    wxGetApp().UpdateDlgDarkUI(this);
 }
 
 void PluginPickerDialog::build_capability_ui(const wxString& plugin_type_label)
 {
+    SetBackgroundColour(*wxWHITE);
+
     const bool has_capabilities = !m_capabilities.empty();
 
     auto* top_sizer = new wxBoxSizer(wxVERTICAL);
     auto* info_text = new wxStaticText(this, wxID_ANY,
         wxString::Format(_L("Choose a %s plugin from the list below."), plugin_type_label));
-    top_sizer->Add(info_text, 0, wxALL | wxEXPAND, 10);
+    info_text->SetFont(Label::Body_14);
+    info_text->SetForegroundColour(wxColour("#363636"));
+
+    top_sizer->Add(info_text, 0, wxALL | wxEXPAND, FromDIP(10));
+
+    top_sizer->AddSpacer(FromDIP(5));
 
     wxArrayString choices;
     choices.reserve(m_capabilities.size());
     for (const auto& cap : m_capabilities)
         choices.Add(cap.label);
 
-    m_choice = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
+    m_choice = new ComboBox(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0, NULL, wxCB_READONLY);
+    for (const wxString &opt : choices) { m_choice->Append(opt); }
+
     if (has_capabilities) {
         m_choice->SetSelection(0);
-        m_choice->Bind(wxEVT_CHOICE, [this](wxCommandEvent& evt) {
+        m_choice->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent& evt) {
             update_capability_description(evt.GetSelection());
         });
     } else {
         m_choice->Enable(false);
     }
 
-    top_sizer->Add(m_choice, 0, wxLEFT | wxRIGHT | wxEXPAND, 10);
+    top_sizer->Add(m_choice, 0, wxLEFT | wxRIGHT | wxEXPAND, FromDIP(10));
 
     m_description = new wxStaticText(this, wxID_ANY, wxEmptyString);
+    m_description->SetFont(Label::Body_14);
+    m_description->SetForegroundColour(wxColour("#363636"));
     m_description->Wrap(400);
-    top_sizer->Add(m_description, 0, wxALL | wxEXPAND, 10);
+    top_sizer->Add(m_description, 0, wxALL | wxEXPAND, FromDIP(10));
 
     if (has_capabilities)
         update_capability_description(0);
     else
         m_description->SetLabel(_L("No plugins found for this type."));
 
-    auto* button_sizer = new wxStdDialogButtonSizer();
-    auto* ok_button = new wxButton(this, wxID_OK);
-    ok_button->Enable(has_capabilities);
-    button_sizer->AddButton(ok_button);
-    button_sizer->AddButton(new wxButton(this, wxID_CANCEL));
-    button_sizer->Realize();
+    auto dlg_btns = new DialogButtons(this, {"OK", "Cancel"});
 
-    top_sizer->Add(button_sizer, 0, wxALL | wxALIGN_RIGHT, 10);
+    dlg_btns->GetOK()->Bind(wxEVT_BUTTON, [this](wxCommandEvent &e) { EndModal(wxID_OK); });
+    dlg_btns->GetOK()->Enable(has_capabilities);
+
+    dlg_btns->GetCANCEL()->Bind(wxEVT_BUTTON, [this](wxCommandEvent &e) { EndModal(wxID_CANCEL); });
+
+    top_sizer->Add(dlg_btns, 0, wxEXPAND);
 
     SetSizerAndFit(top_sizer);
+
+    wxGetApp().UpdateDlgDarkUI(this);
 }
 
 PluginPickerDialog::CapabilityEntry PluginPickerDialog::selected_capability() const
@@ -187,4 +214,6 @@ void PluginPickerDialog::update_description(int selection)
     Layout();
 }
 
+void PluginPickerDialog::on_dpi_changed(const wxRect &suggested_rect) {}
+
 }} // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/PluginPickerDialog.hpp b/src/slic3r/GUI/PluginPickerDialog.hpp
index 0d676eb04d..6ae4163c5f 100644
--- a/src/slic3r/GUI/PluginPickerDialog.hpp
+++ b/src/slic3r/GUI/PluginPickerDialog.hpp
@@ -11,9 +11,12 @@
 
 #include "slic3r/plugin/PluginManager.hpp"
 
+#include "GUI_Utils.hpp"
+#include "Widgets/ComboBox.hpp"
+
 namespace Slic3r { namespace GUI {
 
-class PluginPickerDialog : public wxDialog
+class PluginPickerDialog : public DPIDialog
 {
 public:
     // Entry for capability-level selection (plugin_type non-empty path).
@@ -40,17 +43,18 @@ public:
     // Returns the {plugin_key, name} of the selected capability (capability path).
     CapabilityEntry selected_capability() const;
 
+    void on_dpi_changed(const wxRect &suggested_rect) override;
+
 private:
     void build_ui(const wxString& plugin_type_label);
     void build_capability_ui(const wxString& plugin_type_label);
     void update_description(int selection);
     void update_capability_description(int selection);
 
-    wxChoice*                      m_choice       { nullptr };
+    ComboBox*                      m_choice       { nullptr };
     wxStaticText*                  m_description  { nullptr };
     std::vector<Slic3r::PluginDescriptor> m_plugins;
     std::vector<CapabilityEntry>   m_capabilities;
-    bool                           m_capability_mode { false };
 };
 
 }} // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/PluginsConfigDialog.cpp b/src/slic3r/GUI/PluginsConfigDialog.cpp
index 0241b47b8c..9a79588af1 100644
--- a/src/slic3r/GUI/PluginsConfigDialog.cpp
+++ b/src/slic3r/GUI/PluginsConfigDialog.cpp
@@ -1,6 +1,7 @@
 #include "PluginsConfigDialog.hpp"
 
 #include "GUI_App.hpp"
+#include "GUI.hpp"
 #include "I18N.hpp"
 #include "format.hpp"
 
diff --git a/src/slic3r/GUI/PluginsDialog.cpp b/src/slic3r/GUI/PluginsDialog.cpp
index a39fcbc535..2bac7eddca 100644
--- a/src/slic3r/GUI/PluginsDialog.cpp
+++ b/src/slic3r/GUI/PluginsDialog.cpp
@@ -2,6 +2,7 @@
 
 #include "GUI.hpp"
 #include "GUI_App.hpp"
+#include "slic3r/Utils/NetworkAgent.hpp"
 #include "I18N.hpp"
 #include "OrcaCloudServiceAgent.hpp"
 #include "slic3r/plugin/PluginConfig.hpp"
diff --git a/src/slic3r/GUI/PluginsDialog.hpp b/src/slic3r/GUI/PluginsDialog.hpp
index e663de79e4..ec68d12969 100644
--- a/src/slic3r/GUI/PluginsDialog.hpp
+++ b/src/slic3r/GUI/PluginsDialog.hpp
@@ -2,6 +2,7 @@
 #define slic3r_PluginsDialog_hpp_
 
 #include "Widgets/WebViewHostDialog.hpp"
+#include "Widgets/ProgressDialog.hpp"
 #include "PluginSource.hpp"
 #include "PluginStatus.hpp"
 #include "PluginSort.hpp"
@@ -107,12 +108,12 @@ private:
                          const wxString& title,
                          const wxString& message,
                          int maximum = 100,
-                         int style   = wxPD_APP_MODAL | wxPD_AUTO_HIDE,
+                         int style   = wxPD_APP_MODAL | wxPD_AUTO_HIDE, // | wxPD_CAN_ABORT for cancel button
                          bool finish_after_dialog_destroyed = false)
     {
         const auto alive = m_alive;
-        wxProgressDialog* progress = new wxProgressDialog(title, message, maximum, this, style);
-        wxTimer* timer             = new wxTimer();
+        ProgressDialog* progress = new ProgressDialog(title, message, maximum, this, style);
+        wxTimer* timer           = new wxTimer();
 
         timer->Bind(wxEVT_TIMER, [alive, progress, message](wxTimerEvent&) {
             if (alive->load(std::memory_order_acquire) && progress)
diff --git a/src/slic3r/GUI/Preferences.cpp b/src/slic3r/GUI/Preferences.cpp
index 50f4c04c52..aa831ad489 100644
--- a/src/slic3r/GUI/Preferences.cpp
+++ b/src/slic3r/GUI/Preferences.cpp
@@ -2,6 +2,7 @@
 #include "OptionsGroup.hpp"
 #include "GUI_App.hpp"
 #include "MainFrame.hpp"
+#include "WebViewDialog.hpp"
 #include "Plater.hpp"
 #include "GLCanvas3D.hpp" // ORCA: for live preview refresh when toggling "Dim lower layers"
 #include "MsgDialog.hpp"
@@ -509,26 +510,14 @@ wxBoxSizer *PreferencesDialog::create_item_language_combobox(wxString title, wxS
                     }
                 }
 
-
-                // the dialog needs to be destroyed before the call to switch_language()
-                // or sometimes the application crashes into wxDialogBase() destructor
-                // so we put it into an inner scope
-                MessageDialog msg_wingow(nullptr, _L("Switching languages requires the application to restart.\n") + "\n" + _L("Do you want to continue?"),
-                                         L("Language selection"), wxICON_QUESTION | wxOK | wxCANCEL);
-                if (msg_wingow.ShowModal() == wxID_CANCEL) {
+                MessageDialog msg_window(nullptr, _L("Switching languages requires the application to restart.\n") + "\n" + _L("Do you want to continue?"),
+                                         _L("Language selection"), wxICON_QUESTION | wxOK | wxCANCEL);
+                if (msg_window.ShowModal() == wxID_CANCEL) {
                     combobox->SetSelection(m_current_language_selected);
                     return;
                 }
             }
 
-            auto check = [](bool yes_or_no) {
-                // if (yes_or_no)
-                //    return true;
-                int act_btns = ActionButtons::SAVE;
-                return wxGetApp().check_and_keep_current_preset_changes(_L("Switching application language"),
-                                                                        _L("Switching application language while some presets are modified."), act_btns);
-            };
-
             m_current_language_selected = combobox->GetSelection();
             if (m_current_language_selected >= 0 && m_current_language_selected < vlist.size()) {
                 m_pending_language = vlist[m_current_language_selected]->CanonicalName.ToUTF8().data();
@@ -1033,11 +1022,6 @@ wxBoxSizer *PreferencesDialog::create_item_checkbox(wxString title, wxString too
         app_config->set_bool(param, checkbox->GetValue());
         app_config->save();
 
-        // if (param == "staff_pick_switch") {
-        //     bool pbool = app_config->get("staff_pick_switch") == "true";
-        //     wxGetApp().switch_staff_pick(pbool);
-        // }
-
         if (param == "sync_user_preset") {
             bool sync = app_config->get("sync_user_preset") == "true" ? true : false;
             if (sync) {
diff --git a/src/slic3r/GUI/Printer/PrinterFileSystem.cpp b/src/slic3r/GUI/Printer/PrinterFileSystem.cpp
index 8ec6909c8c..9aa35e2cff 100644
--- a/src/slic3r/GUI/Printer/PrinterFileSystem.cpp
+++ b/src/slic3r/GUI/Printer/PrinterFileSystem.cpp
@@ -1803,7 +1803,7 @@ static void* get_function(const char* name)
         return function;
 
 #if defined(_MSC_VER) || defined(_WIN32)
-    function = GetProcAddress(module, name);
+    function = reinterpret_cast<void*>(GetProcAddress(module, name));
 #else
     function = dlsym(module, name);
 #endif
diff --git a/src/slic3r/GUI/PrivacyUpdateDialog.cpp b/src/slic3r/GUI/PrivacyUpdateDialog.cpp
index 92d6d6c8c7..c417767a42 100644
--- a/src/slic3r/GUI/PrivacyUpdateDialog.cpp
+++ b/src/slic3r/GUI/PrivacyUpdateDialog.cpp
@@ -1,5 +1,6 @@
 #include "PrivacyUpdateDialog.hpp"
 #include "GUI_App.hpp"
+#include "GUI.hpp"
 #include "BitmapCache.hpp"
 #include <wx/dcgraph.h>
 #include <slic3r/GUI/I18N.hpp>
diff --git a/src/slic3r/GUI/PublishSettingsDialog.cpp b/src/slic3r/GUI/PublishSettingsDialog.cpp
new file mode 100644
index 0000000000..57818dca82
--- /dev/null
+++ b/src/slic3r/GUI/PublishSettingsDialog.cpp
@@ -0,0 +1,2228 @@
+#include "PublishSettingsDialog.hpp"
+
+#include "GUI_App.hpp"
+#include "MainFrame.hpp"
+#include "MsgDialog.hpp"
+#include "I18N.hpp"
+#include "Tab.hpp"
+#include "ConfigValueFormatter.hpp"
+#include "FilamentBitmapUtils.hpp"
+#include "Widgets/Label.hpp"
+#include "Widgets/TextInput.hpp"
+#include "Widgets/DialogButtons.hpp"
+#include "Widgets/StaticLine.hpp"
+#include "Widgets/StateColor.hpp"
+
+#include "libslic3r/PrintConfig.hpp"
+#include "libslic3r/Preset.hpp"
+#include "libslic3r/PublishSettings.hpp"
+#include "libslic3r/FilamentMixer.hpp"
+#include "libslic3r/Model.hpp"
+
+#include <boost/algorithm/string/trim.hpp>
+#include <wx/display.h>
+#include <wx/utils.h>
+#include <wx/dcbuffer.h>
+#include <wx/dcmemory.h>
+#include <wx/dcgraph.h>
+#include <wx/image.h>
+#include <wx/wrapsizer.h>
+#include <set>
+#include <algorithm>
+#include <cmath>
+#include <cstring>
+#include <memory>
+#include <numeric>
+#include <tuple>
+#include <utility>
+
+namespace Slic3r { namespace GUI {
+namespace {
+
+// Menu ids for show_menu(): dedicated range so the popup cannot collide with application-level
+// bindings (e.g. MainFrame's recent-files wxID_FILE1.. range).
+enum {
+    kPublishSelectAll = wxID_HIGHEST + 1,
+    kPublishDeselectAll,
+    kPublishSelectVisible,
+    kPublishDeselectVisible,
+    kPublishFilterSelected,
+    kPublishFilterNonSelected
+};
+
+// Tree-style flags shared by the outer tabs and every group's inner tabs.
+constexpr long s_tab_style = wxTR_NO_BUTTONS | wxTR_HIDE_ROOT | wxTR_SINGLE | wxTR_NO_LINES | wxBORDER_NONE | wxWANTS_CHARS |
+                             wxTR_FULL_ROW_HIGHLIGHT;
+
+// The author's hex colour for a filament slot (empty when the slot is out of range); shared by
+// the header chip, the inner-tab chip and the DPI rescale paths.
+std::string filament_color_hex(const DynamicPrintConfig& full, size_t slot)
+{
+    if (const auto* colours = full.opt<ConfigOptionStrings>("filament_colour"))
+        if (slot < colours->size())
+            return colours->get_at(slot);
+    return std::string();
+}
+
+PublishMaterialIdentity material_identity(size_t slot, const DynamicPrintConfig& full)
+{
+    PublishMaterialIdentity identity;
+    if (const auto* types = full.opt<ConfigOptionStrings>("filament_type"))
+        if (slot < types->size())
+            identity.type = types->get_at(slot);
+    if (const auto* vendors = full.opt<ConfigOptionStrings>("filament_vendor"))
+        if (slot < vendors->size())
+            identity.vendor = vendors->get_at(slot);
+    if (const auto* ids = full.opt<ConfigOptionStrings>("filament_ids"))
+        if (slot < ids->size())
+            identity.id = ids->get_at(slot);
+    return identity;
+}
+
+// "Generic PLA @System" -> "Generic PLA"; mirrors the alias derivation in PresetBundle.cpp.
+std::string material_display_name(const std::string& preset_name)
+{
+    const size_t at = preset_name.find_first_of('@');
+    if (at == std::string::npos)
+        return preset_name;
+    std::string bare = preset_name.substr(0, at);
+    boost::trim_right(bare);
+    return bare.empty() ? preset_name : bare;
+}
+
+// Section title for a filament slot: the resolved preset name, then the filament type, then
+// the generic "Material".
+wxString material_title(size_t slot, const PresetBundle* bundle, const DynamicPrintConfig& full)
+{
+    if (slot < bundle->filament_presets.size()) {
+        const Preset* preset = bundle->filaments.find_preset(bundle->filament_presets[slot]);
+        if (preset != nullptr && !preset->name.empty()) {
+            // Display the name the sidebar does: the alias (already bare-name + variant-tail
+            // stripped for root filament presets).
+            const std::string& display = preset->alias.empty() ? get_preset_bare_name(preset->name) : preset->alias;
+            return from_u8(material_display_name(display));
+        }
+    }
+    const PublishMaterialIdentity identity = material_identity(slot, full);
+    if (!identity.type.empty())
+        return from_u8(identity.type);
+    return _L("Material");
+}
+
+// The component slots of a mixed filament ("1,2,3"), 1-based, or empty when out of range.
+std::vector<unsigned int> mixed_slot_components(const DynamicPrintConfig& full, size_t slot)
+{
+    const auto* comp_opt = full.opt<ConfigOptionStrings>("filament_mixed_components");
+    if (comp_opt == nullptr || slot >= comp_opt->size())
+        return {};
+    return parse_mixed_components(comp_opt->values[slot]);
+}
+
+// Human-readable label of a mixed filament, mirroring the sidebar's mixed filament rows: the
+// 1-based component slot numbers with their blend percentages (or a "->" gradient arrow),
+// e.g. "1 (60%) + 2 (40%)". Used as the slot's tab/header title in place of a preset name.
+wxString mixed_filament_label(const DynamicPrintConfig& full, size_t slot)
+{
+    const std::vector<unsigned int> comps = mixed_slot_components(full, slot);
+    if (comps.empty())
+        return _L("Mixed filament");
+    const auto* grad_opt   = full.opt<ConfigOptionBools>("filament_mixed_gradient");
+    const bool is_gradient = grad_opt != nullptr && slot < grad_opt->size() && grad_opt->values[slot];
+    const auto* ratios_opt = full.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios");
+    wxString label;
+    for (size_t i = 0; i < comps.size(); ++i) {
+        if (i > 0)
+            label += is_gradient ? wxString::FromUTF8(" \u2192 ") : wxString::FromUTF8(" + ");
+        label += wxString::Format("%u", comps[i]);
+        if (!is_gradient) {
+            double ratio = 100.0 / comps.size();
+            if (ratios_opt != nullptr && slot < ratios_opt->size()) {
+                const std::vector<double> rs = parse_mixed_ratios(ratios_opt->values[slot], comps.size());
+                if (i < rs.size())
+                    ratio = rs[i] * 100.0;
+            }
+            label += wxString::Format(" (%d%%)", int(ratio + 0.5));
+        }
+    }
+    return label;
+}
+
+// Blended representative colour of a mixed slot, computed exactly like the sidebar's swatches
+// (recompute_mixed_slot_colors): sublayer slots blend by their ratios, gradient slots by their
+// two end colours, broken references fall back to grey.
+wxColour mixed_filament_blend_color(const DynamicPrintConfig& full, size_t slot)
+{
+    std::vector<wxColour> colors;
+    if (const auto* colours = full.opt<ConfigOptionStrings>("filament_colour")) {
+        colors.reserve(colours->values.size());
+        for (const std::string& hex : colours->values) {
+            const wxColour c(hex);
+            colors.push_back(c.IsOk() ? c : wxColour(0, 0, 0));
+        }
+    }
+    while (colors.size() <= slot)
+        colors.push_back(wxColour("#D9D9D9"));
+    recompute_mixed_slot_colors(colors, full);
+    return slot < colors.size() ? colors[slot] : wxColour("#D9D9D9");
+}
+
+// The slot's own chip as the main GUI renders it: a curve-sampled gradient swatch for a
+// gradient mixed slot, the static blended colour otherwise. Returns wxNullBitmap when nothing
+// could be rendered (the caller falls back to a plain label).
+wxBitmap mixed_filament_chip_bitmap(const DynamicPrintConfig& full, size_t slot, int swatch_sz)
+{
+    const std::string label = std::to_string(slot + 1);
+    const auto* grad_opt    = full.opt<ConfigOptionBools>("filament_mixed_gradient");
+    const bool is_gradient  = grad_opt != nullptr && slot < grad_opt->size() && grad_opt->values[slot];
+    wxBitmap* icon          = nullptr;
+    if (is_gradient) {
+        // The same curve-sampled ramp the sidebar chips use; an empty ramp (broken definition)
+        // degrades to a plain fade between the slot's two component colours.
+        const std::vector<wxColour> ramp = mixed_gradient_ramp(full, slot, swatch_sz);
+        if (!ramp.empty()) {
+            icon = get_extruder_color_icon(std::vector<std::string>(), true, label, swatch_sz, swatch_sz, &ramp);
+        } else {
+            std::vector<std::string> hexes;
+            for (const unsigned int comp : mixed_slot_components(full, slot)) {
+                std::string hex = filament_color_hex(full, size_t(comp) - 1);
+                if (hex.empty())
+                    hex = "#D9D9D9";
+                hexes.push_back(std::move(hex));
+            }
+            if (hexes.size() >= 2)
+                icon = get_extruder_color_icon(std::move(hexes), true, label, swatch_sz, swatch_sz);
+        }
+    }
+    if (icon == nullptr) {
+        const wxColour blend = mixed_filament_blend_color(full, slot);
+        const std::string blend_hex = blend.IsOk() ?
+                                          std::string(wxString::Format("#%02X%02X%02X", blend.Red(), blend.Green(), blend.Blue()).ToUTF8()) :
+                                          std::string("#808080");
+        icon = get_extruder_color_icon(blend_hex, label, swatch_sz, swatch_sz);
+    }
+    return icon != nullptr ? *icon : wxNullBitmap;
+}
+
+// Tab-strip bitmap for a mixed slot: the mix's own chip, then its component swatches each
+// followed by their percent share (or a "->" arrow for gradients), mirroring the main GUI's
+// sidebar rows - e.g. "[3 purple]: [1 red] 50% + [2 blue] 50%". The whole composition is one
+// bitmap because a TabCtrl item cannot interleave images into its text; the tab's text is
+// therefore empty. The bitmap is opaque and bakes tab_bg (the tab strip's background colour):
+// its texts are rasterized with plain GDI on that solid ground, like the sidebar rows and the
+// color chips. Text on a transparent bitmap has to go through the graphics-context route, and
+// on MSW that degrades into jagged ClearType-fallback glyphs with fringe halos - the same
+// reason draw_mixed_gradient_plot renders into an opaque buffer (FilamentBitmapUtils.cpp).
+wxBitmap mixed_filament_tab_bitmap(const DynamicPrintConfig& full, size_t slot, int swatch_sz, const wxColour& tab_bg)
+{
+    const std::vector<unsigned int> comps = mixed_slot_components(full, slot);
+    if (comps.empty())
+        return wxNullBitmap;
+    const auto* grad_opt   = full.opt<ConfigOptionBools>("filament_mixed_gradient");
+    const bool is_gradient = grad_opt != nullptr && slot < grad_opt->size() && grad_opt->values[slot];
+    const auto* ratios_opt = full.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios");
+    std::vector<double> ratio_pct(comps.size(), 100.0 / comps.size());
+    if (!is_gradient && ratios_opt != nullptr && slot < ratios_opt->size()) {
+        const std::vector<double> rs = parse_mixed_ratios(ratios_opt->values[slot], comps.size());
+        for (size_t i = 0; i < rs.size() && i < comps.size(); ++i)
+            ratio_pct[i] = rs[i] * 100.0;
+    }
+
+    const auto* colours     = full.opt<ConfigOptionStrings>("filament_colour");
+    const wxString lead_sep = wxString::FromUTF8(":");
+    const wxString comp_sep = is_gradient ? wxString::FromUTF8("\u2192") : wxString::FromUTF8("+");
+
+    // Phase 1 (layout): render every swatch and measure every text piece so the composite
+    // width is known before drawing; the dummy bitmap keeps GetTextExtent reliable.
+    struct Piece
+    {
+        enum Kind { Swatch, Text } kind{Text};
+        wxBitmap bmp;
+        wxString text;
+    };
+    std::vector<Piece> pieces;
+    bool has_lead = false;
+    wxBitmap dummy(1, 1);
+    wxMemoryDC measure_dc;
+    measure_dc.SelectObject(dummy);
+    measure_dc.SetFont(::Label::Body_12);
+    const int gap = wxWindow::FromDIP(4, nullptr);
+
+    auto push_swatch = [&](const std::string& hex, const std::string& label) {
+        wxBitmap* icon = get_extruder_color_icon(hex, label, swatch_sz, swatch_sz);
+        if (icon == nullptr)
+            return;
+        pieces.push_back({Piece::Swatch, *icon, wxString()});
+    };
+    auto push_text = [&](const wxString& text) { pieces.push_back({Piece::Text, wxNullBitmap, text}); };
+
+    {
+        const wxBitmap chip = mixed_filament_chip_bitmap(full, slot, swatch_sz);
+        has_lead            = chip.IsOk();
+        if (has_lead)
+            pieces.push_back({Piece::Swatch, chip, wxString()});
+    }
+    for (size_t ci = 0; ci < comps.size(); ++ci) {
+        if (pieces.empty())
+            break;
+        push_text(has_lead && pieces.size() == 1 ? lead_sep : comp_sep); // lead chip may have failed to render
+        std::string hex = "#D9D9D9";
+        if (colours != nullptr && comps[ci] >= 1 && comps[ci] <= colours->size())
+            hex = colours->values[comps[ci] - 1];
+        const size_t before = pieces.size();
+        push_swatch(hex, std::to_string(comps[ci]));
+        if (pieces.size() == before)
+            break; // swatch failed: stop cleanly before an orphaned separator/percent pair
+        if (!is_gradient) {
+            push_text(wxString::Format("%d%%", int(ratio_pct[ci] + 0.5)));
+        }
+    }
+    if (pieces.empty())
+        return wxNullBitmap;
+
+    int width = 0;
+    for (const Piece& p : pieces)
+        width += (p.kind == Piece::Swatch ? swatch_sz : measure_dc.GetTextExtent(p.text).x + gap);
+
+    // Phase 2 (draw): opaque, filled with the tab strip's background colour. Text goes through
+    // the plain DC on every platform (see the function comment for why the alpha route is
+    // avoided); chip bitmaps keep their own alpha and composite cleanly onto the fill.
+    wxBitmap composite(width, swatch_sz);
+    wxMemoryDC memdc;
+    memdc.SelectObject(composite);
+    memdc.SetBackground(wxBrush(tab_bg));
+    memdc.Clear();
+    memdc.SetBackgroundMode(wxTRANSPARENT);
+    memdc.SetFont(::Label::Body_12);
+    memdc.SetTextForeground(StateColor::darkModeColorFor(wxColour("#262E30")));
+    int x = 0;
+    for (const Piece& p : pieces) {
+        if (p.kind == Piece::Swatch) {
+            memdc.DrawBitmap(p.bmp, x, 0, true);
+            x += swatch_sz;
+        } else {
+            const wxSize tsz = measure_dc.GetTextExtent(p.text);
+            memdc.DrawText(p.text, x + gap / 2, (swatch_sz - tsz.y) / 2);
+            x += tsz.x + gap;
+        }
+    }
+    memdc.SelectObject(wxNullBitmap);
+    return composite;
+}
+
+// The filament slots (0-based) the current project actually uses, across every plate: base and
+// MMU-painted volume extruders, per-object layer-range and support/wall/infill filament
+// overrides, and custom-gcode tool changes. Used mixed slots are preserved as themselves (so an
+// in-use mix is publishable) while their physical components are added too - a mix always ships
+// with the materials of its components even if a component is not referenced directly anywhere.
+std::set<size_t> project_used_filament_slots(const PresetBundle& bundle, const DynamicPrintConfig& full, const Model& model)
+{
+    std::set<size_t> used; // 0-based used slots, mixed slots not yet expanded
+    if (model.objects.empty())
+        return used;
+
+    auto add_1based = [&used](int id) {
+        if (id > 0)
+            used.insert(size_t(id - 1));
+    };
+
+    const DynamicPrintConfig& print_cfg = bundle.prints.get_edited_preset().config;
+    const int glb_support_intf   = print_cfg.opt_int("support_interface_filament");
+    const int glb_support        = print_cfg.opt_int("support_filament");
+    const int glb_outer_wall     = print_cfg.opt_int("outer_wall_filament_id");
+    const int glb_inner_wall     = print_cfg.opt_int("inner_wall_filament_id");
+    const int glb_sparse_infill  = print_cfg.opt_int("sparse_infill_filament_id");
+    const int glb_internal_solid = print_cfg.opt_int("internal_solid_filament_id");
+    const int glb_top_surface    = print_cfg.opt_int("top_surface_filament_id");
+    const int glb_bottom_surface = print_cfg.opt_int("bottom_surface_filament_id");
+    const bool glb_support_on    = print_cfg.opt_bool("enable_support") || print_cfg.opt_int("raft_layers") > 0;
+
+    for (ModelObject* mo : model.objects) {
+        for (ModelVolume* mv : mo->volumes)
+            for (int e : mv->get_extruders())
+                add_1based(e);
+
+        for (const auto& range_entry : mo->layer_config_ranges)
+            if (const ConfigOption* ext_opt = range_entry.second.option("extruder"))
+                add_1based(ext_opt->getInt());
+
+        bool obj_support = glb_support_on;
+        if (const ConfigOption* s_opt = mo->config.option("enable_support"); s_opt != nullptr)
+            obj_support = s_opt->getBool();
+        else if (const ConfigOption* r_opt = mo->config.option("raft_layers"); r_opt != nullptr)
+            obj_support = r_opt->getInt() > 0;
+
+        if (obj_support) {
+            if (const ConfigOption* opt = mo->config.option("support_interface_filament"); opt != nullptr && opt->getInt() != 0)
+                add_1based(opt->getInt());
+            else
+                add_1based(glb_support_intf);
+
+            if (const ConfigOption* opt = mo->config.option("support_filament"); opt != nullptr && opt->getInt() != 0)
+                add_1based(opt->getInt());
+            else
+                add_1based(glb_support);
+        }
+
+        auto obj_id = [&mo](const char* key) {
+            const ConfigOption* opt = mo->config.option(key);
+            return (opt != nullptr) ? opt->getInt() : 0;
+        };
+
+        int obj_outer_wall = obj_id("outer_wall_filament_id");
+        if (obj_outer_wall == 0)
+            obj_outer_wall = obj_id("inner_wall_filament_id");
+        add_1based(obj_outer_wall != 0 ? obj_outer_wall : glb_outer_wall);
+
+        int obj_inner_wall = obj_id("inner_wall_filament_id");
+        if (obj_inner_wall == 0)
+            obj_inner_wall = obj_id("outer_wall_filament_id");
+        add_1based(obj_inner_wall != 0 ? obj_inner_wall : glb_inner_wall);
+
+        const int obj_sparse = obj_id("sparse_infill_filament_id");
+        add_1based(obj_sparse != 0 ? obj_sparse : glb_sparse_infill);
+
+        const int obj_internal_solid = obj_id("internal_solid_filament_id");
+        add_1based(obj_internal_solid != 0 ? obj_internal_solid : glb_internal_solid);
+
+        int obj_top = obj_id("top_surface_filament_id");
+        if (obj_top == 0)
+            obj_top = obj_internal_solid;
+        add_1based(obj_top != 0 ? obj_top : glb_top_surface);
+
+        int obj_bottom = obj_id("bottom_surface_filament_id");
+        if (obj_bottom == 0)
+            obj_bottom = obj_internal_solid;
+        add_1based(obj_bottom != 0 ? obj_bottom : glb_bottom_surface);
+    }
+
+    for (const auto& plate_entry : model.plates_custom_gcodes)
+        for (const CustomGCode::Item& item : plate_entry.second.gcodes)
+            if (item.type == CustomGCode::Type::ToolChange)
+                add_1based(item.extruder);
+
+    // Expand used mixed slots to their physical components and keep each mixed slot itself so the
+    // dialog shows the mix. A component both used directly and pulled in via a mix is deduped.
+    const auto* is_mixed_opt = full.opt<ConfigOptionBools>("filament_is_mixed");
+    const auto* comp_opt     = full.opt<ConfigOptionStrings>("filament_mixed_components");
+    if (is_mixed_opt != nullptr && comp_opt != nullptr && has_any_mixed_filament(is_mixed_opt->values)) {
+        const std::vector<unsigned int> raw(used.begin(), used.end());
+        const std::vector<unsigned int> expanded = expand_mixed_filaments(raw, is_mixed_opt->values, comp_opt->values);
+        std::set<size_t> result(expanded.begin(), expanded.end());
+        for (unsigned int s : raw)
+            if (s < is_mixed_opt->values.size() && is_mixed_opt->values[s])
+                result.insert(s);
+        return result;
+    }
+
+    return used;
+}
+
+// Lays a translated sentence out along `row`, replacing each "%1%"-style placeholder with the
+// matching window from `chips`. Keeping the sentence in one msgid lets a translation put the
+// placeholders wherever its own grammar needs them; spacing comes from the translation itself.
+void add_sentence_with_chips(wxWindow* parent, wxSizer* row, const wxString& sentence, const std::vector<wxWindow*>& chips)
+{
+    std::vector<bool> placed(chips.size(), false);
+    auto add_text = [&](wxString text) {
+        text.Replace("%%", "%"); // the sentence is a format string
+        if (text.IsEmpty())
+            return;
+        auto* label = new wxStaticText(parent, wxID_ANY, text);
+        label->SetFont(Label::Body_12);
+        label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#6B6B6B")));
+        row->Add(label, 0, wxALIGN_CENTER_VERTICAL);
+    };
+    auto add_chip = [&](size_t i) {
+        if (i < chips.size() && chips[i] != nullptr && !placed[i]) {
+            placed[i] = true;
+            row->Add(chips[i], 0, wxALIGN_CENTER_VERTICAL);
+        }
+    };
+
+    size_t literal = 0, pos = 0;
+    while ((pos = sentence.find('%', pos)) != wxString::npos) {
+        size_t end = pos + 1;
+        while (end < sentence.length() && sentence[end] >= '0' && sentence[end] <= '9')
+            ++end;
+        if (end == pos + 1 || end >= sentence.length() || sentence[end] != '%') {
+            ++pos; // a bare '%'
+            continue;
+        }
+        long index = 0;
+        sentence.Mid(pos + 1, end - pos - 1).ToLong(&index);
+        add_text(sentence.Mid(literal, pos - literal));
+        add_chip(size_t(index - 1));
+        literal = pos = end + 1;
+    }
+    add_text(sentence.Mid(literal));
+    for (size_t i = 0; i < chips.size(); ++i) // whatever the translation left out
+        add_chip(i);
+}
+
+} // namespace
+
+// Warning shown on OK when an enabled mixed-filament slot relies on a filament that would ship
+// without its material. One row per unmet dependency, each a single translated sentence whose
+// two placeholders are the mixed slot's and the component filament's colour chips. "Cancel" is
+// the safe choice and keeps the dialog open; "Publish anyway" continues.
+class MixedFilamentWarningDialog : public MsgDialog
+{
+public:
+    MixedFilamentWarningDialog(wxWindow* parent, const DynamicPrintConfig& full, const std::vector<MixedDependencyIssue>& issues)
+        : MsgDialog(parent, _L("Warning"), wxEmptyString, wxOK | wxCANCEL | wxICON_WARNING)
+    {
+        auto* content = new wxBoxSizer(wxVERTICAL);
+
+        auto* intro = new wxStaticText(this, wxID_ANY, _L("Some mixed filaments rely on filaments that will not be published:"));
+        intro->SetFont(Label::Body_13);
+        intro->Wrap(FromDIP(400));
+        content->Add(intro, 0, wxEXPAND);
+        content->AddSpacer(FromDIP(10));
+
+        const int swatch = FromDIP(20);
+        // The slot's colour swatch, numbered like its tab, with the slot name on hover; falls
+        // back to a label so the sentence always names both filaments.
+        auto make_chip = [&](const wxBitmap& bmp, const wxString& name) -> wxWindow* {
+            if (bmp.IsOk()) {
+                auto* chip = new wxStaticBitmap(this, wxID_ANY, bmp);
+                chip->SetToolTip(name);
+                return chip;
+            }
+            auto* label = new wxStaticText(this, wxID_ANY, name);
+            label->SetFont(Label::Body_12);
+            return label;
+        };
+
+        for (const MixedDependencyIssue& issue : issues) {
+            std::string hex = filament_color_hex(full, issue.component_slot);
+            if (hex.empty())
+                hex = "#D9D9D9";
+            const wxBitmap* comp_bmp = get_extruder_color_icon(hex, std::to_string(issue.component_slot + 1), swatch, swatch);
+
+            wxWindow* mix_chip  = make_chip(mixed_filament_chip_bitmap(full, issue.mixed_slot, swatch),
+                                            wxString::Format(_L("Filament %d (mixed)"), int(issue.mixed_slot) + 1));
+            wxWindow* comp_chip = make_chip(comp_bmp != nullptr ? *comp_bmp : wxNullBitmap,
+                                            wxString::Format(_L("Filament %d"), int(issue.component_slot) + 1));
+
+            auto* row = new wxWrapSizer(wxHORIZONTAL);
+            add_sentence_with_chips(this, row,
+                                    issue.reason == MixedDependencyIssue::Reason::Disabled ?
+                                        _L("%1% needs %2%, which is not enabled.") :
+                                        _L("%1% needs %2%, whose material will not be published."),
+                                    {mix_chip, comp_chip});
+            content->Add(row, 0, wxEXPAND | wxLEFT, FromDIP(10));
+            content->AddSpacer(FromDIP(6));
+        }
+
+        auto* hint = new wxStaticText(
+            this, wxID_ANY,
+            _L("To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."));
+        hint->SetFont(Label::Body_12);
+        hint->Wrap(FromDIP(380));
+        content->Add(hint, 0, wxEXPAND | wxTOP, FromDIP(4));
+
+        content_sizer->Add(content, 0, wxEXPAND);
+
+        SetButtonLabel(wxID_OK, _L("Publish anyway"));
+        SetButtonLabel(wxID_CANCEL, _L("Cancel"), true); // safe choice gets the focus
+
+        finalize();
+    }
+};
+
+PublishSettingsDialog::MixedVisualSpec PublishSettingsDialog::make_mixed_visual_spec(const DynamicPrintConfig& full, size_t slot)
+{
+    MixedVisualSpec spec;
+    const std::vector<unsigned int> comps = mixed_slot_components(full, slot);
+    if (comps.empty())
+        return spec;
+
+    const auto* grad_opt = full.opt<ConfigOptionBools>("filament_mixed_gradient");
+    spec.is_gradient     = grad_opt != nullptr && slot < grad_opt->size() && grad_opt->values[slot];
+
+    const auto* colours = full.opt<ConfigOptionStrings>("filament_colour");
+    for (unsigned int cid : comps) {
+        std::string hex = "#D9D9D9";
+        if (colours != nullptr && cid >= 1 && cid <= colours->size())
+            hex = colours->values[cid - 1];
+        const wxColour c(hex);
+        spec.component_colours.push_back(c.IsOk() ? c : wxColour("#D9D9D9"));
+    }
+
+    if (!spec.is_gradient) {
+        // Sublayer shares; parse_mixed_ratios already falls back to equal shares and
+        // normalizes to sum 1.
+        spec.ratios.assign(comps.size(), 1.0 / comps.size());
+        if (const auto* ratios_opt = full.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios"))
+            if (slot < ratios_opt->size()) {
+                const std::vector<double> rs = parse_mixed_ratios(ratios_opt->values[slot], comps.size());
+                if (rs.size() == comps.size())
+                    spec.ratios = rs;
+            }
+        if (comps.size() == 3)
+            spec.tri_weights = spec.ratios; // the picker's barycentric shares
+    } else {
+        const Slic3r::GradientCurve curve = mixed_gradient_curve(full, slot);
+        constexpr int kSamples            = 256;
+        for (int i = 0; i <= kSamples; ++i) {
+            const double t = double(i) / kSamples;
+            spec.gradient_samples.emplace_back(t, sample_gradient_curve(curve, t));
+        }
+        for (const Slic3r::GradientAnchor& anchor : curve.points)
+            spec.gradient_anchors.emplace_back(anchor.x, anchor.y);
+    }
+
+    spec.valid = true;
+    return spec;
+}
+
+PublishSettingsDialog::PublishSettingsDialog(wxWindow* parent,
+                                             const std::vector<std::string>* published_keys,
+                                             const std::vector<Slic3r::PublishedMaterialEntry>* material_keys)
+    : DPIDialog(parent ? parent : static_cast<wxWindow*>(wxGetApp().mainframe),
+                wxID_ANY,
+                _L("Publish 3MF..."),
+                wxDefaultPosition,
+                wxDefaultSize,
+                wxCAPTION | wxCLOSE_BOX | wxRESIZE_BORDER | wxFULL_REPAINT_ON_RESIZE)
+    , m_search(this, "search", 16)
+    , m_menu(this, "filter", 16)
+{
+    SetBackgroundColour(*wxWHITE);
+
+    // --- filter bar: search box, All/None, menu button ---
+    wxPanel* f_bar = new wxPanel(this, wxID_ANY);
+    f_bar->SetBackgroundColour(GetBackgroundColour());
+    wxBoxSizer* f_sizer = new wxBoxSizer(wxHORIZONTAL);
+
+    m_filter_box = new TextInput(f_bar, "", "", "", wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER);
+    m_filter_box->SetIcon(m_search.bmp());
+    m_filter_box->SetMinSize(FromDIP(wxSize(200, 24)));
+    m_filter_box->SetSize(FromDIP(wxSize(-1, 24)));
+    m_filter_box->SetFocus();
+    m_filter_ctrl = m_filter_box->GetTextCtrl();
+    m_filter_ctrl->SetFont(Label::Body_13);
+    m_filter_ctrl->SetSize(wxSize(-1, FromDIP(16))); // centers text vertically
+    m_filter_ctrl->SetHint(_L("Type to filter..."));
+    m_filter_ctrl->Bind(wxEVT_TEXT, [this](auto&) { apply_filter(m_filter_ctrl->GetValue()); });
+    m_filter_ctrl->Bind(wxEVT_TEXT_ENTER, [this](auto&) { apply_filter(m_filter_ctrl->GetValue()); });
+    m_filter_ctrl->Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
+        if (m_filter_mode != FilterMode::Text)
+            apply_filter(m_filter_ctrl->GetValue());
+        e.Skip();
+    });
+    f_sizer->Add(m_filter_box, 1, wxEXPAND);
+
+    m_fb_sizer      = new wxBoxSizer(wxHORIZONTAL);
+    auto create_btn = [this, f_bar](wxString title, bool select) {
+        auto btn = new wxStaticText(f_bar, wxID_ANY, title);
+        btn->SetForegroundColour("#009687");
+        btn->SetCursor(wxCURSOR_HAND);
+        btn->SetFont(Label::Body_13);
+        btn->Bind(wxEVT_LEFT_DOWN, [this, select](wxMouseEvent&) { select_all(select); });
+        m_fb_sizer->Add(btn, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, FromDIP(10));
+    };
+    f_sizer->Add(m_fb_sizer, 0, wxALIGN_CENTER_VERTICAL);
+    create_btn(_L("All"), true);
+    create_btn(_L("None"), false);
+
+    // Indicator for the menu's pseudo filters: sits where All/None go while they are hidden.
+    // Labels reuse the menu entries (no new strings); clicking the chip returns to text
+    // filtering, keeping the search box contents.
+    m_pseudo_chip = new wxStaticText(f_bar, wxID_ANY, "");
+    m_pseudo_chip->SetForegroundColour("#009687");
+    m_pseudo_chip->SetCursor(wxCURSOR_HAND);
+    m_pseudo_chip->SetFont(Label::Body_13);
+    m_pseudo_chip->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent&) { apply_filter(m_filter_ctrl->GetValue()); });
+    m_pseudo_chip->Hide();
+    f_sizer->Add(m_pseudo_chip, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, FromDIP(10));
+
+    m_menu_button = new wxStaticBitmap(f_bar, wxID_ANY, m_menu.bmp());
+    m_menu_button->SetCursor(wxCURSOR_HAND);
+    m_menu_button->Bind(wxEVT_LEFT_DOWN, &PublishSettingsDialog::show_menu, this);
+    f_sizer->Add(m_menu_button, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, FromDIP(10));
+
+    f_bar->SetSizerAndFit(f_sizer);
+
+    m_outer_tabs = new TabCtrl(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, s_tab_style);
+    m_outer_tabs->SetFont(Label::Body_14);
+    m_outer_tabs->SetBackgroundColour(GetBackgroundColour());
+
+    m_outer_host = new wxPanel(this, wxID_ANY);
+    m_outer_host->SetBackgroundColour(GetBackgroundColour());
+    m_outer_host_sizer = new wxBoxSizer(wxVERTICAL);
+    m_outer_host->SetSizer(m_outer_host_sizer);
+
+    wxBoxSizer* w_sizer = new wxBoxSizer(wxVERTICAL);
+
+    wxStaticText* msg = new wxStaticText(this, wxID_ANY, _L("Select which settings to be published in the 3MF file"));
+    msg->SetFont(Label::Body_13);
+    msg->Wrap(-1);
+    w_sizer->Add(msg, 0, wxRIGHT | wxLEFT | wxTOP, FromDIP(10));
+
+    w_sizer->Add(f_bar, 0, wxRIGHT | wxLEFT | wxTOP | wxEXPAND, FromDIP(10));
+    w_sizer->Add(m_outer_tabs, 0, wxRIGHT | wxLEFT | wxTOP | wxEXPAND, FromDIP(10));
+    w_sizer->Add(m_outer_host, 1, wxRIGHT | wxLEFT | wxTOP | wxEXPAND, FromDIP(10));
+
+    build_option_model();
+
+    // Seed from a remembered session selection or a freshly loaded published 3MF (authoritative).
+    if (published_keys != nullptr || material_keys != nullptr)
+        apply_selection(published_keys != nullptr ? *published_keys : std::vector<std::string>(),
+                        material_keys != nullptr ? *material_keys : std::vector<Slic3r::PublishedMaterialEntry>());
+
+    auto dlg_btns = new DialogButtons(this, {"OK", "Cancel"});
+
+    dlg_btns->GetOK()->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) {
+        // Publish is always allowed: no settings selected means no settings override. Warn only
+        // when an enabled mixed filament would ship without the material of one of its
+        // components; "Publish anyway" accepts that and publishes anyway.
+        if (const std::vector<MixedDependencyIssue> issues = unpublished_mixed_components(); !issues.empty()) {
+            const DynamicPrintConfig full = wxGetApp().preset_bundle->full_config();
+            MixedFilamentWarningDialog warn(this, full, issues);
+            if (warn.ShowModal() != wxID_OK)
+                return; // Cancel: dismiss the warning and stay in this dialog
+        }
+        EndModal(wxID_OK);
+    });
+    dlg_btns->GetCANCEL()->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { EndModal(wxID_CANCEL); });
+
+    // Guide links, bottom-left, sharing the footer row with the OK/Cancel buttons (pushed right).
+    auto make_link = [this](const wxString& label, const char* url) {
+        wxStaticText* link = new wxStaticText(this, wxID_ANY, label);
+        link->SetFont(Label::Body_13);
+        link->SetForegroundColour(wxColour(0x1F, 0x8E, 0xEA));
+        link->SetCursor(wxCURSOR_HAND);
+        link->Bind(wxEVT_LEFT_DOWN, [url](wxMouseEvent&) { wxLaunchDefaultBrowser(url, wxBROWSER_NEW_WINDOW); });
+        return link;
+    };
+    wxBoxSizer* links_sizer = new wxBoxSizer(wxVERTICAL);
+    links_sizer->Add(make_link(_L("Publish 3MF Wiki"), "https://www.orcaslicer.com/wiki/publishing_3mf/publish_3mf.html"), 0, wxALIGN_LEFT);
+    links_sizer->Add(make_link(_L("Publish 3MF Video Guide"), "https://www.youtube.com/watch?v=-xt1N29UIOg"), 0,
+                     wxTOP | wxALIGN_LEFT, FromDIP(4));
+
+    wxBoxSizer* footer = new wxBoxSizer(wxHORIZONTAL);
+    footer->Add(links_sizer, 0, wxALIGN_CENTER_VERTICAL);
+    footer->AddStretchSpacer();
+    footer->Add(dlg_btns, 0, wxALIGN_CENTER_VERTICAL);
+    w_sizer->Add(footer, 0, wxRIGHT | wxLEFT | wxBOTTOM | wxEXPAND, FromDIP(10));
+
+    SetSizerAndFit(w_sizer);
+    fit_to_content(); // initial size only; the dialog is resizable
+    wxGetApp().UpdateDlgDarkUI(this);
+    // The dark-UI walk re-colours the tab strips after the compositions were baked; rebuild so
+    // they carry the theme-resolved background (the sidebar resolves its colours at paint time,
+    // this dialog bakes, so the bake has to happen after the walk).
+    refresh_mixed_tab_bitmaps();
+}
+
+// Size the window to its content: width follows the widest tab strip so no filament tab is
+// hidden (TabCtrl::relayout hides overflowing buttons), height scales proportionally. Both
+// are floored at the 600x500 base and capped at hard DIP limits - deliberately not the whole
+// display - with one last-resort clamp so the dialog can never open larger than the screen.
+// Also owns the resize floor: the window cannot be resized below what the tabs need, so
+// shrinking never re-hides a filament tab.
+void PublishSettingsDialog::fit_to_content()
+{
+    static const wxSize BASE{600, 500};
+    static const wxSize CAP{1300, 850};
+
+    int strip = m_outer_tabs->GetFullSize();
+    for (const SectionGroup& section : m_sections) {
+        strip = std::max(strip, section.tabs->GetFullSize());
+        if (section.mixed_tabs != nullptr)
+            strip = std::max(strip, section.mixed_tabs->GetFullSize());
+    }
+
+    // Minimum width: whatever keeps every tab visible (never below the base). strip is device
+    // pixels (Button min sizes); BASE/CAP are DIP and converted over.
+    const int min_w = std::max(strip + 2 * FromDIP(10), FromDIP(BASE.x));
+
+    // Initial size: prefer proportional growth within the caps.
+    const int w    = std::clamp(min_w, FromDIP(BASE.x), FromDIP(CAP.x));
+    const double f = double(w) / FromDIP(BASE.x);
+    const int h    = std::clamp(int(FromDIP(BASE.y) * f), FromDIP(BASE.y), FromDIP(CAP.y));
+
+    const wxRect area = wxDisplay(this).GetClientArea();
+    const int max_w   = area.width * 9 / 10;
+    const int max_h   = area.height * 9 / 10;
+
+    SetMinSize(wxSize(std::min(min_w, max_w), std::min(FromDIP(BASE.y), max_h)));
+    SetSize(std::min(w, max_w), std::min(h, max_h));
+}
+
+PublishSettingsDialog::~PublishSettingsDialog() {}
+
+void PublishSettingsDialog::build_option_model()
+{
+    // Structural / non-publishable keys, shared with the published-3MF overlay path.
+    const std::set<std::string>& denylist = publish_structural_keys();
+    // Base keys already added in the print section (dedup across pages/optgroups). The printer
+    // section keeps its own printer_added set keyed by the full per-extruder "#N" opt_id, so
+    // every extruder gets its own row (see Phase 1 below).
+    std::set<std::string> added;
+
+    PresetBundle* bundle    = wxGetApp().preset_bundle;
+    DynamicPrintConfig full = bundle->full_config();
+
+    m_info_nonsel = _L("No selected items...");
+    m_info_allsel = _L("All items selected...");
+    m_info_empty  = _L("No matching items...");
+    m_info_mix    = _L("Mixed filament - published as a whole when \"Enable\" above is selected");
+
+    // Tab order differs from Section's enum order (Print, Printer, Material): the dialog
+    // presents Printer, Filament, Process.
+    m_sections.reserve(3);
+    const Section tab_order[] = {Section::Printer, Section::Material, Section::Print};
+    for (Section kind : tab_order)
+        section_group_for(kind);
+    bind_tab_events();
+
+    // Shared per-option label/value computation; returns false when the option must be skipped
+    // (denylisted / unknown / empty label). value is the stringified value; unit the translated
+    // sidetext (may be empty).
+    auto option_text = [&denylist, &full](const std::string& opt_id, const std::string& pure_key, wxString& label, wxString& value,
+                                          wxString& unit) -> bool {
+        if (denylist.count(pure_key) > 0)
+            return false;
+        const ConfigOptionDef* def = print_config_def.get(pure_key);
+        if (def == nullptr)
+            return false;
+        label = _(def->full_label.empty() ? def->label : def->full_label);
+        if (label.IsEmpty())
+            return false;
+        value = get_string_value(opt_id, full);
+        unit  = _(def->sidetext);
+        return true;
+    };
+
+    // --- Phase 1: printer per-extruder retraction settings (first, mirroring the sidebar's
+    // Printer group), from the printer tab's "Extruder"/"Extruder N" pages. One inner tab per
+    // extruder (e.g. "Left Extruder"/"Right Extruder" via Tab::translate_category), each holding
+    // that extruder's Retraction and Z-Hop rows with per-extruder "#N" values.
+    {
+        size_t g = section_group_for(Section::Printer);
+        std::set<std::string> printer_added;
+        for (Tab* tab : wxGetApp().tabs_list) {
+            if (tab->m_type != Preset::TYPE_PRINTER)
+                continue;
+            for (const PageShp& page : tab->m_pages) {
+                if (!page->title().StartsWith("Extruder"))
+                    continue;
+                // The extruder index of this page: its options are appended with the same
+                // "#N" opt_index (opt.second.second), so derive the tab's index from the first
+                // allowlisted option; skip the page when none is found (defensive).
+                int extruder_idx = -1;
+                for (const ConfigOptionsGroupShp& optgroup : page->m_optgroups) {
+                    if (optgroup->title != "Retraction" && optgroup->title != "Z-Hop")
+                        continue;
+                    for (const auto& opt : optgroup->opt_map())
+                        if (extruder_idx < 0)
+                            extruder_idx = opt.second.second;
+                    if (extruder_idx >= 0)
+                        break;
+                }
+                if (extruder_idx < 0)
+                    continue;
+                const wxString page_title = Tab::translate_category(page->title(), tab->m_type);
+                for (const ConfigOptionsGroupShp& optgroup : page->m_optgroups) {
+                    // Allowlist on the untranslated optgroup title; the "Retraction when
+                    // switching material" group is intentionally skipped.
+                    if (optgroup->title != "Retraction" && optgroup->title != "Z-Hop")
+                        continue;
+                    const wxString subcategory = _(optgroup->title);
+                    for (const auto& opt : optgroup->opt_map()) {
+                        const std::string& opt_id   = opt.first;
+                        const std::string& pure_key = opt.second.first;
+                        // Rows are keyed by the full per-extruder "#N" opt_id so each extruder
+                        // tab publishes its own value; GetPublishedKeys() emits the checked rows
+                        // as-is.
+                        if (!printer_added.insert(opt_id).second)
+                            continue;
+                        wxString label, value, unit;
+                        if (!option_text(opt_id, pure_key, label, value, unit))
+                            continue;
+                        size_t cat_index = category_index_for(page_title, Section::Printer, g, size_t(extruder_idx));
+                        size_t sub_index = subcategory_index_for(cat_index, subcategory, optgroup->icon);
+                        add_row_ui(opt_id, label, value, unit, cat_index, sub_index);
+                    }
+                }
+            }
+        }
+    }
+
+    // --- Phase 2: per-material sections synthesized from the filament tab's "Setting
+    // Overrides" page, under the Filament group.
+    {
+        size_t g          = section_group_for(Section::Material);
+        Tab* filament_tab = nullptr;
+        for (Tab* tab : wxGetApp().tabs_list)
+            if (tab->m_type == Preset::TYPE_FILAMENT) {
+                filament_tab = tab;
+                break;
+            }
+        if (filament_tab != nullptr) {
+            const Page* overrides_page = nullptr;
+            for (const PageShp& page : filament_tab->m_pages)
+                if (page->title() == "Setting Overrides") {
+                    overrides_page = page.get();
+                    break;
+                }
+
+            if (overrides_page != nullptr) {
+                // Mixed-color slots are virtual: they carry no per-key Material/Retraction
+                // settings; their "Enable" toggle always embeds the mix definition (components,
+                // ratios, gradient). Detect them via the project-level flag.
+                const ConfigOptionBools* is_mixed_opt = full.opt<ConfigOptionBools>("filament_is_mixed");
+                // Only the slots the project actually uses: base/MMU-painted volume extruders,
+                // support/wall/infill overrides and custom-gcode tool changes, plus the physical
+                // components of any in-use mixed slot. Unused slots get no section at all (and are
+                // therefore never published). One section per used slot, disambiguated by its
+                // colour chip and slot identity while showing the bare name.
+                const std::set<size_t> used_slots = project_used_filament_slots(*bundle, full, wxGetApp().plater()->model());
+                for (size_t slot = 0; slot < bundle->filament_presets.size(); ++slot) {
+                    if (used_slots.find(slot) == used_slots.end())
+                        continue;
+                    const bool is_mixed = is_mixed_opt != nullptr && slot < is_mixed_opt->size() && is_mixed_opt->values[slot];
+                    const PublishMaterialIdentity identity = material_identity(slot, full);
+                    // A mixed slot's title is its component composition (e.g. "1 (60%) + 2
+                    // (40%)"), not the cloned preset's name shown in the main GUI.
+                    const wxString title        = is_mixed ? mixed_filament_label(full, slot) : material_title(slot, bundle, full);
+                    const size_t category_index = category_index_for(title, Section::Material, g, slot, identity, is_mixed);
+
+                    if (is_mixed) {
+                        // A mixed slot publishes as one unit (its definition); nothing to select
+                        // per-key. Its component filaments are auto-enabled + Full Published when
+                        // "Enable" is checked (see on_enable_toggle). Its page still shows what
+                        // would be published: a ratio bar, or the gradient graph.
+                        add_mixed_visual(category_index, make_mixed_visual_spec(full, slot));
+                        continue;
+                    }
+
+                    // Material requirement rows: an optional filament colour and/or a
+                    // vendor-agnostic material type for this slot, in their own optgroup so they
+                    // stay visually separated from the setting rows.
+                    {
+                        const size_t req_sub = subcategory_index_for(category_index, _L("Material"), "custom-gcode_filament");
+                        add_row_ui("filament_colour", _L("Color"), from_u8(filament_color_hex(full, slot)), wxString(), category_index,
+                                   req_sub, RowKind::Color);
+                        std::string type;
+                        if (const auto* types = full.opt<ConfigOptionStrings>("filament_type"))
+                            if (slot < types->size())
+                                type = types->get_at(slot);
+                        add_row_ui("filament_type", _L("Type"), from_u8(normalize_filament_type(type)), wxString(), category_index, req_sub,
+                                   RowKind::Type);
+                    }
+
+                    // A material section must not repeat a key; the same key may appear in other
+                    // material sections - that is intended.
+                    std::set<std::string> material_added;
+
+                    for (const ConfigOptionsGroupShp& optgroup : overrides_page->m_optgroups) {
+                        // Allowlist on the untranslated optgroup title; "Ironing" is skipped.
+                        if (optgroup->title != "Retraction" && optgroup->title != "Retraction when switching material")
+                            continue;
+                        for (const auto& opt : optgroup->opt_map()) {
+                            // Row keys are base keys; the load side applies them positionally.
+                            const std::string& opt_id = opt.first;
+                            std::string base          = publish_base_key(opt_id);
+                            if (!material_added.insert(base).second)
+                                continue;
+                            // Show the value of this slot; fall back to slot 0 if out of range.
+                            std::string value_opt_id = base + "#" + std::to_string(slot);
+                            if (const ConfigOption* opt_cfg = full.option(base))
+                                if (const auto* vec = dynamic_cast<const ConfigOptionVectorBase*>(opt_cfg))
+                                    if (vec->size() > 0 && slot >= vec->size())
+                                        value_opt_id = base + "#0";
+                            wxString label, value, unit;
+                            if (!option_text(value_opt_id, base, label, value, unit))
+                                continue;
+                            size_t sub_index = subcategory_index_for(category_index, _(optgroup->title), optgroup->icon);
+                            add_row_ui(base, label, value, unit, category_index, sub_index);
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    // --- Phase 3: process (print) settings; grouping matches the process tab.
+    {
+        size_t g = section_group_for(Section::Print);
+        for (Tab* tab : wxGetApp().tabs_list) {
+            if (tab->m_type != Preset::TYPE_PRINT)
+                continue;
+            size_t page_index = 0;
+            for (const PageShp& page : tab->m_pages) {
+                wxString category           = Tab::translate_category(page->title(), tab->m_type);
+                const size_t category_index = category_index_for(category, Section::Print, g, page_index);
+
+                for (const ConfigOptionsGroupShp& optgroup : page->m_optgroups) {
+                    for (const auto& opt : optgroup->opt_map()) {
+                        // opt_map() key is the opt_id (may carry "#N"); the value is
+                        // (pure_opt_key, opt_index).
+                        const std::string& opt_id   = opt.first;
+                        const std::string& pure_key = opt.second.first;
+                        // A key may appear in more than one page/group; keep the first.
+                        if (!added.insert(pure_key).second)
+                            continue;
+                        wxString label, value, unit;
+                        if (!option_text(opt_id, pure_key, label, value, unit))
+                            continue;
+                        size_t sub_index = subcategory_index_for(category_index, _(optgroup->title), optgroup->icon);
+                        add_row_ui(opt_id, label, value, unit, category_index, sub_index);
+                    }
+                }
+                ++page_index;
+            }
+        }
+    }
+
+    // Pre-check the dirty (modified) settings and mark them bold (per-slot match, across all
+    // sections; collect_dirty_settings_keys unions the prints, printers and filaments).
+    // Dirty keys carry a "#N" per-extruder/per-slot suffix (deep_diff), so the base key alone
+    // cannot distinguish which extruder/filament slot changed: match the row's exact key, and
+    // for material rows (base key + per-slot value) the base key plus the section's slot.
+    std::set<std::string> dirty_keys;
+    for (const std::string& key : collect_dirty_settings_keys(*wxGetApp().preset_bundle))
+        dirty_keys.insert(key);
+    for (Row& row : m_rows) {
+        // The Color/Type requirement rows are not "dirty overrides": never auto-checked.
+        if (row.kind != RowKind::Setting)
+            continue;
+        bool dirty = dirty_keys.count(row.key) != 0;
+        if (!dirty && row.section == Section::Material)
+            dirty = dirty_keys.count(publish_base_key(row.key) + "#" + std::to_string(m_categories[row.inner_index].filament_slot)) != 0;
+        row.dirty = dirty;
+        if (row.dirty) {
+            row.check->SetValue(true);
+            set_row_bold(row, true);
+        }
+    }
+
+    // Wire the "Enable" checkboxes: toggling one reveals/hides the slot's settings below the
+    // header (and, for a mixed slot, auto-selects its components). Bind by index so the lambda
+    // stays valid even if the vector is reallocated later.
+    for (size_t c = 0; c < m_categories.size(); ++c)
+        if (m_categories[c].enable_check != nullptr)
+            m_categories[c].enable_check->Bind(wxEVT_CHECKBOX, [this, c](wxCommandEvent&) { on_enable_toggle(c); });
+
+    // Wire the "Full Publish" checkboxes (physical slots): toggling one disables/enables the
+    // material's rows.
+    for (size_t c = 0; c < m_categories.size(); ++c)
+        if (m_categories[c].full_check != nullptr)
+            m_categories[c].full_check->Bind(wxEVT_CHECKBOX, [this, c](wxCommandEvent&) { on_full_toggle(c); });
+
+    // No filter is active at startup: every row matches until the user types.
+    for (Row& row : m_rows)
+        row.matches_filter = true;
+    apply_visibility();
+
+    for (Category& category : m_categories) {
+        category.scroll->FitInside();
+        category.list_sizer->Layout();
+    }
+    for (SectionGroup& section : m_sections)
+        if (!section.categories.empty())
+            section.tabs->SelectItem(0);
+    if (!m_sections.empty()) {
+        m_outer_tabs->SelectItem(0);
+        show_outer_page(0);
+    }
+    refresh_tab_indicators();
+}
+
+size_t PublishSettingsDialog::section_group_for(Section kind)
+{
+    for (size_t i = 0; i < m_sections.size(); ++i)
+        if (m_sections[i].kind == kind)
+            return i;
+
+    SectionGroup section;
+    section.kind           = kind;
+    const size_t new_index = m_sections.size();
+    switch (kind) {
+    case Section::Printer:
+        section.title     = _L("Printer");
+        section.icon_name = "printer";
+        break;
+    case Section::Material:
+        section.title     = _L("Filament");
+        section.icon_name = "filament";
+        break;
+    case Section::Print:
+        section.title     = _L("Process");
+        section.icon_name = "process";
+        break;
+    }
+    section.icon_bmp = ScalableBitmap(this, section.icon_name, 16);
+
+    section.page = new wxPanel(m_outer_host, wxID_ANY);
+    section.page->SetBackgroundColour(GetBackgroundColour());
+    auto* page_sizer = new wxBoxSizer(wxVERTICAL);
+    section.tabs     = new TabCtrl(section.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, s_tab_style);
+    section.tabs->SetFont(Label::Body_14);
+    section.tabs->SetBackgroundColour(GetBackgroundColour());
+    page_sizer->Add(section.tabs, 0, wxEXPAND);
+    // Mixed-color filament slots get a second tab strip below the physical filament tabs; only
+    // the Material section has them.
+    if (kind == Section::Material) {
+        section.mixed_tabs = new TabCtrl(section.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, s_tab_style);
+        section.mixed_tabs->SetFont(Label::Body_14);
+        section.mixed_tabs->SetBackgroundColour(GetBackgroundColour());
+        page_sizer->Add(section.mixed_tabs, 0, wxEXPAND | wxTOP, FromDIP(2));
+        section.mixed_tabs->Hide();
+    }
+    section.page_host = new wxPanel(section.page, wxID_ANY);
+    section.page_host->SetBackgroundColour(GetBackgroundColour());
+    section.page_host_sizer = new wxBoxSizer(wxVERTICAL);
+    section.page_host->SetSizer(section.page_host_sizer);
+    page_sizer->Add(section.page_host, 1, wxEXPAND | wxTOP, FromDIP(4));
+    section.page->SetSizer(page_sizer);
+
+    if (section.icon_bmp.bmp().IsOk())
+        m_outer_tabs->AppendItem(section.title, section.icon_bmp.bmp());
+    else
+        m_outer_tabs->AppendItem(section.title);
+    m_outer_host_sizer->Add(section.page, 1, wxEXPAND);
+    section.page->Hide();
+    m_sections.push_back(std::move(section));
+    return new_index;
+}
+
+size_t PublishSettingsDialog::category_index_for(
+    const wxString& title, Section section, size_t group, size_t source_index, const PublishMaterialIdentity& identity, bool is_mixed)
+{
+    // Dedup across both tab rows (physical + mixed); mixed slots are never duplicated anyway.
+    auto match = [&](const Category& existing) {
+        return existing.title == title && existing.section == section && existing.source_index == source_index &&
+               existing.filament_id == identity.id && existing.filament_type == identity.type &&
+               existing.filament_vendor == identity.vendor;
+    };
+    for (size_t i : m_sections[group].categories)
+        if (match(m_categories[i]))
+            return i;
+    for (size_t i : m_sections[group].mixed_categories)
+        if (match(m_categories[i]))
+            return i;
+
+    Category category;
+    category.title           = title;
+    category.section         = section;
+    category.group           = group;
+    category.source_index    = source_index;
+    category.filament_type   = identity.type;
+    category.filament_vendor = identity.vendor;
+    category.filament_id     = identity.id;
+    category.filament_slot   = source_index;
+    category.is_mixed        = is_mixed;
+    category.page            = new wxPanel(m_sections[group].page_host, wxID_ANY);
+    category.page->SetBackgroundColour(GetBackgroundColour());
+    auto* page_sizer = new wxBoxSizer(wxVERTICAL);
+
+    // The physical slot's colour chip decorates the page header and the inner tab; it carries
+    // the 1-based slot number, mirroring the main GUI's filament swatches. A mixed slot has no
+    // header at all: its page is just the Enable toggle above the (always visible) definition
+    // preview - the identification lives in the tab strip's composition bitmap.
+    std::string hex;
+    std::string chip_label;
+    if (section == Section::Material && !is_mixed) {
+        const DynamicPrintConfig full = wxGetApp().preset_bundle->full_config();
+        hex                           = filament_color_hex(full, source_index);
+        chip_label                    = std::to_string(source_index + 1);
+    }
+
+    if (section == Section::Material) {
+        if (is_mixed) {
+            // No chip/title: the lone "Enable" checkbox tops the page.
+            auto* enable_sizer    = new wxBoxSizer(wxHORIZONTAL);
+            category.enable_check = new wxCheckBox(category.page, wxID_ANY, _L("Enable"));
+            category.enable_check->SetFont(Label::Body_13);
+            category.enable_check->SetToolTip(_L("Publish this mixed filament and enable + Full Publish its component filaments"));
+            enable_sizer->Add(category.enable_check, 0, wxALIGN_CENTER_VERTICAL);
+            page_sizer->Add(enable_sizer, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, FromDIP(6));
+        } else {
+            // Line 1: [chip] [title] [Enable]. The Enable checkbox gates the whole slot: while
+            // it is unchecked nothing below the title is shown and nothing of it is published.
+            auto* header_sizer = new wxBoxSizer(wxHORIZONTAL);
+            if (wxBitmap* chip = get_extruder_color_icon(hex, chip_label, FromDIP(20), FromDIP(20))) {
+                category.filament_color_chip = new wxStaticBitmap(category.page, wxID_ANY, *chip);
+                header_sizer->Add(category.filament_color_chip, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(4));
+            }
+            category.title_label = new wxStaticText(category.page, wxID_ANY, title);
+            category.title_label->SetFont(Label::Head_14);
+            header_sizer->Add(category.title_label, 0, wxALIGN_CENTER_VERTICAL);
+            category.enable_check = new wxCheckBox(category.page, wxID_ANY, _L("Enable"));
+            category.enable_check->SetFont(Label::Body_13);
+            category.enable_check->SetToolTip(_L("Publish this filament slot in the 3MF file"));
+            header_sizer->Add(category.enable_check, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(10));
+            page_sizer->Add(header_sizer, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, FromDIP(6));
+
+            // Line 2: the "Full Publish" toggle, on its own line below the title (hidden until
+            // the slot is enabled), aligned with the colour chip above it.
+            auto* full_sizer    = new wxBoxSizer(wxHORIZONTAL);
+            category.full_check = new wxCheckBox(category.page, wxID_ANY, _L("Full Publish"));
+            category.full_check->SetFont(Label::Body_13);
+            category.full_check->SetToolTip(_L("Embed the entire filament of this slot in the 3MF file"));
+            full_sizer->Add(category.full_check, 0, wxALIGN_CENTER_VERTICAL);
+            category.full_line_item = page_sizer->Add(full_sizer, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, FromDIP(6));
+        }
+    }
+
+    category.scroll = new wxScrolledWindow(category.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
+    category.scroll->SetScrollRate(0, 10);
+    category.scroll->SetBackgroundColour(GetBackgroundColour());
+    category.list_sizer = new wxBoxSizer(wxVERTICAL);
+    category.scroll->SetSizer(category.list_sizer);
+    category.scroll->DisableFocusFromKeyboard();
+    category.scroll->Bind(wxEVT_RIGHT_DOWN, &PublishSettingsDialog::show_menu, this);
+    category.info = new wxStaticText(category.scroll, wxID_ANY, is_mixed ? m_info_mix : m_info_empty);
+    category.info->SetFont(Label::Body_13);
+    category.list_sizer->Add(category.info, 1, wxALIGN_CENTER_HORIZONTAL | wxALL, FromDIP(10));
+    category.info->Hide();
+    page_sizer->Add(category.scroll, 1, wxEXPAND | wxALL, FromDIP(4));
+    // A material slot starts disabled: its rows (and its Full Publish line) stay hidden until
+    // "Enable" is checked.
+    if (section == Section::Material)
+        category.scroll->Hide();
+    category.page->SetSizer(page_sizer);
+    category.page->Hide();
+
+    const size_t category_index = m_categories.size();
+    m_categories.push_back(std::move(category));
+    // Mixed slots live in a second tab row below the physical filament tabs.
+    if (is_mixed)
+        m_sections[group].mixed_categories.push_back(category_index);
+    else
+        m_sections[group].categories.push_back(category_index);
+    if (section == Section::Material) {
+        TabCtrl* target = is_mixed ? m_sections[group].mixed_tabs : m_sections[group].tabs;
+        if (is_mixed) {
+            // The tab's whole composition (mix chip + components + percents) lives in one
+            // bitmap; the text is empty because a TabCtrl item cannot interleave images into
+            // its text.
+            const DynamicPrintConfig full_cfg = wxGetApp().preset_bundle->full_config();
+            const wxBitmap tab_bmp = mixed_filament_tab_bitmap(full_cfg, source_index, FromDIP(20), target->GetBackgroundColour());
+            if (tab_bmp.IsOk())
+                target->AppendItem(wxString(), tab_bmp);
+            else
+                target->AppendItem(title);
+        } else if (wxBitmap* chip = get_extruder_color_icon(hex, chip_label, FromDIP(20), FromDIP(20))) {
+            target->AppendItem(title, *chip);
+        } else {
+            target->AppendItem(title);
+        }
+    } else {
+        m_sections[group].tabs->AppendItem(title);
+    }
+    m_sections[group].page_host_sizer->Add(m_categories[category_index].page, 1, wxEXPAND);
+    if (is_mixed) {
+        if (m_sections[group].selected_mixed < 0)
+            m_sections[group].selected_mixed = 0;
+        m_sections[group].mixed_tabs->Show();
+    } else if (m_sections[group].selected_inner < 0) {
+        m_sections[group].selected_inner = 0;
+    }
+    return category_index;
+}
+
+size_t PublishSettingsDialog::subcategory_index_for(size_t category_index, const wxString& title, const wxString& icon)
+{
+    Category& category = m_categories[category_index];
+    for (size_t i = 0; i < category.subs.size(); ++i)
+        if (category.subs[i].title == title)
+            return i;
+
+    Subcategory sub;
+    sub.title = title;
+    if (!title.IsEmpty()) {
+        sub.header = new ::StaticLine(category.scroll, false, title, icon);
+        sub.header->SetFont(Label::Head_14);
+        sub.header->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#363636")));
+        auto* wrap = new wxBoxSizer(wxVERTICAL);
+        wrap->Add(sub.header, 0, wxEXPAND | wxTOP | wxBOTTOM, FromDIP(6));
+        sub.item = category.list_sizer->Add(wrap, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(22));
+    }
+    category.subs.push_back(std::move(sub));
+    return category.subs.size() - 1;
+}
+
+void PublishSettingsDialog::add_row_ui(const std::string& key,
+                                       const wxString& label,
+                                       const wxString& value,
+                                       const wxString& unit,
+                                       size_t category_index,
+                                       size_t subcategory_index,
+                                       RowKind kind)
+{
+    Category& category = m_categories[category_index];
+    Row row;
+    row.key                = key;
+    row.label              = label;
+    row.value              = value;
+    row.unit               = unit;
+    row.kind               = kind;
+    row.category           = category.title;
+    row.subcategory        = category.subs[subcategory_index].title;
+    row.section            = category.section;
+    row.section_title      = m_sections[category.group].title;
+    row.outer_index        = category.group;
+    row.inner_index        = category_index;
+    const size_t row_index = m_rows.size();
+    m_rows.push_back(std::move(row));
+    Row& current  = m_rows[row_index];
+    current.check = new wxCheckBox(category.scroll, wxID_ANY, label);
+    current.check->SetFont(Label::Body_13);
+    current.check->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent&) { refresh_tab_indicators(); });
+    auto* row_sizer = new wxBoxSizer(wxHORIZONTAL);
+    row_sizer->Add(current.check, 0, wxALIGN_CENTER_VERTICAL);
+    // The value is read-only text (incl. the Type row: the published type is the slot's
+    // normalized type, not author-editable).
+    current.value_label = new wxStaticText(category.scroll, wxID_ANY, value, wxDefaultPosition, wxDefaultSize, wxST_ELLIPSIZE_END);
+    current.value_label->SetFont(Label::Body_13);
+    current.value_label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#262E30")));
+    current.value_label->SetToolTip(unit.IsEmpty() ? value : value + " " + unit);
+    if (kind == RowKind::Color && !value.IsEmpty()) {
+        // The colour swatch carries this slot's 1-based number, like the main GUI swatches.
+        const std::string chip_label = std::to_string(category.filament_slot + 1);
+        if (wxBitmap* chip = get_extruder_color_icon(value.ToStdString(), chip_label, FromDIP(20), FromDIP(20))) {
+            current.color_chip = new wxStaticBitmap(category.scroll, wxID_ANY, *chip);
+            row_sizer->Add(current.color_chip, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(8));
+        }
+    }
+    row_sizer->Add(current.value_label, 1, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(8));
+    if (!unit.IsEmpty()) {
+        current.unit_label = new wxStaticText(category.scroll, wxID_ANY, unit);
+        current.unit_label->SetFont(Label::Body_13);
+        current.unit_label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#6B6B6B")));
+        row_sizer->Add(current.unit_label, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(4));
+    }
+    current.item = category.list_sizer->Add(row_sizer, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(38));
+    category.rows.push_back(row_index);
+    category.subs[subcategory_index].rows.push_back(row_index);
+}
+
+void PublishSettingsDialog::on_full_toggle(size_t category_index)
+{
+    Category& cat   = m_categories[category_index];
+    const bool full = cat.full_check->GetValue();
+    for (size_t r : cat.rows)
+        m_rows[r].check->Enable(!full);
+    refresh_tab_indicators();
+}
+
+void PublishSettingsDialog::on_enable_toggle(size_t category_index)
+{
+    Category& cat      = m_categories[category_index];
+    const bool enabled = cat.enable_check->GetValue();
+
+    // A published mixed filament needs its component filaments published too: mark the slots it
+    // uses as "Enable"d and Full Published so the mix's physical components always ship their
+    // identities.
+    if (cat.is_mixed && enabled) {
+        const DynamicPrintConfig full              = wxGetApp().preset_bundle->full_config();
+        const std::vector<unsigned int> components = mixed_slot_components(full, cat.filament_slot);
+        for (const unsigned int component : components) {
+            // Components are 1-based physical filament indices.
+            const size_t component_slot = size_t(component) - 1;
+            for (size_t c = 0; c < m_categories.size(); ++c) {
+                Category& comp_cat = m_categories[c];
+                if (comp_cat.section != Section::Material || comp_cat.is_mixed || comp_cat.filament_slot != component_slot)
+                    continue;
+                if (comp_cat.enable_check != nullptr)
+                    comp_cat.enable_check->SetValue(true);
+                if (comp_cat.full_check != nullptr)
+                    comp_cat.full_check->SetValue(true);
+                on_full_toggle(c);
+            }
+        }
+    }
+
+    // Reveal/hide everything below the slot's header (rows, info, Full Publish line) and refresh
+    // the visibility of the auto-selected component slots.
+    apply_visibility();
+    if (cat.page != nullptr)
+        cat.page->GetSizer()->Layout();
+    refresh_tab_indicators();
+}
+
+void PublishSettingsDialog::add_mixed_visual(size_t category_index, const MixedVisualSpec& spec)
+{
+    if (category_index >= m_categories.size() || !spec.valid)
+        return;
+    Category& category = m_categories[category_index];
+    if (category.page == nullptr || category.page->GetSizer() == nullptr || category.scroll == nullptr || spec.component_colours.empty())
+        return;
+
+    auto* viz = new wxPanel(category.page, wxID_ANY);
+    viz->SetBackgroundStyle(wxBG_STYLE_PAINT);
+    // Theme colours and DIP metrics are resolved inside the paint handler so dark-mode toggles
+    // and DPI changes are picked up on the next repaint without any explicit listener. The
+    // ternary fill cache lives inside the shared triangle painter (FilamentBitmapUtils).
+    viz->Bind(wxEVT_PAINT, [this, panel = viz, spec](wxPaintEvent&) {
+        const wxColour bg = StateColor::darkModeColorFor(*wxWHITE);
+        wxBufferedPaintDC pdc(panel);
+        pdc.SetBackground(wxBrush(bg));
+        pdc.Clear();
+        const wxRect rc = panel->GetClientRect();
+        if (rc.width <= 0 || rc.height <= 0)
+            return;
+
+        const size_t n = spec.component_colours.size();
+
+        if (spec.tri_weights.size() == 3 && n == 3 && !spec.is_gradient) {
+            // Ternary mix: read-only miniature of the MixedFilamentDialog's triangle picker.
+            const MixedTriangleTheme tri_theme{StateColor::darkModeColorFor(*wxWHITE), StateColor::darkModeColorFor(wxColour("#CECECE")),
+                                               StateColor::darkModeColorFor(wxColour("#262E30")),
+                                               StateColor::darkModeColorFor(wxColour(107, 107, 107))};
+            draw_mixed_triangle_picker(pdc, rc.GetSize(), {spec.component_colours[0], spec.component_colours[1], spec.component_colours[2]},
+                                       {spec.tri_weights[0], spec.tri_weights[1], spec.tri_weights[2]}, tri_theme);
+            draw_mixed_triangle_labels(pdc, rc.GetSize(), {spec.tri_weights[0], spec.tri_weights[1], spec.tri_weights[2]}, tri_theme);
+        } else if (!spec.is_gradient) {
+            // Ratio bar. A 2-component slot matches the MixedFilamentDialog's continuous blend +
+            // divider (with its two end labels); wider non-gradient mixes (rare) fall back to one
+            // solid segment per component.
+            if (n == 2) {
+                const int bar_h = FromDIP(27);
+                draw_mixed_ratio_blend_bar(pdc, wxRect(rc.x, rc.y, rc.width, bar_h), spec.component_colours[0], spec.component_colours[1],
+                                           spec.ratios[1]);
+                // Read-only twin of the dialog's left/right percentage labels.
+                pdc.SetFont(::Label::Body_12);
+                pdc.SetTextForeground(StateColor::darkModeColorFor(wxColour(107, 107, 107)));
+                const wxString la = wxString::Format("%d%%", int(std::lround(spec.ratios[0] * 100.0)));
+                const wxString lb = wxString::Format("%d%%", int(std::lround(spec.ratios[1] * 100.0)));
+                const int lab_y   = rc.y + bar_h + FromDIP(2);
+                pdc.DrawText(la, rc.x, lab_y);
+                pdc.DrawText(lb, rc.x + rc.width - pdc.GetTextExtent(lb).GetWidth(), lab_y);
+            } else {
+                draw_mixed_ratio_segments(pdc, rc, spec.component_colours, spec.ratios);
+                // Percent label centred in each segment wide enough to hold it.
+                std::vector<double> shares = spec.ratios;
+                double total               = 0.0;
+                for (double r : shares)
+                    total += r;
+                if (total <= 0.0) {
+                    shares.assign(n, 1.0 / n);
+                    total = 1.0;
+                }
+                pdc.SetFont(::Label::Body_12);
+                int x0 = rc.x;
+                for (size_t i = 0; i < n; ++i) {
+                    const int x1 = (i + 1 < n) ? rc.x + int(std::lround(std::accumulate(shares.begin(), shares.begin() + i + 1, 0.0) /
+                                                                        total * double(rc.width))) :
+                                                 rc.x + rc.width;
+                    const int w  = std::max(1, x1 - x0);
+                    const wxString text = wxString::Format("%d%%", int(std::lround(shares[i] / total * 100.0)));
+                    const wxSize tsz    = pdc.GetTextExtent(text);
+                    if (tsz.GetWidth() + FromDIP(4) <= w) {
+                        const wxColour& c = spec.component_colours[i];
+                        const double lum  = 0.299 * c.Red() + 0.587 * c.Green() + 0.114 * c.Blue();
+                        pdc.SetTextForeground(lum > 140 ? wxColour("#262E30") : *wxWHITE);
+                        pdc.DrawText(text, x0 + (w - tsz.GetWidth()) / 2, rc.y + (rc.height - tsz.GetHeight()) / 2);
+                    }
+                    x0 = x1;
+                }
+            }
+        } else {
+            // Gradient: read-only miniature of the GradientCurveEditor plot, drawn through the
+            // shared painter so it anti-aliases and keeps the square proportions and labels.
+            const MixedGradientTheme grad_theme{StateColor::darkModeColorFor(*wxWHITE),
+                                                StateColor::darkModeColorFor(wxColour(238, 238, 238)),
+                                                StateColor::darkModeColorFor(wxColour(107, 107, 107)),
+                                                StateColor::darkModeColorFor(wxColour(107, 107, 107)),
+                                                StateColor::darkModeColorFor(wxColour(38, 46, 48)),
+                                                StateColor::darkModeColorFor(wxColour(172, 172, 172)),
+                                                StateColor::darkModeColorFor(*wxWHITE)};
+            std::vector<MixedGradientCurve> curves;
+            std::vector<wxPoint2DDouble> anchors;
+            if (spec.gradient_samples.size() >= 2 && n >= 2) {
+                const wxRect plot = mixed_gradient_plot_rect(rc.GetSize());
+                auto lift_alpha   = [](wxColour c) {
+                    if (c.Alpha() == 0)
+                        c.Set(c.Red(), c.Green(), c.Blue(), 150);
+                    return c;
+                };
+                // First component's ratio solid, its mirror twin for the other.
+                const wxColour col_a = lift_alpha(spec.component_colours[0]);
+                const wxColour col_b = lift_alpha(spec.component_colours[1]);
+                std::vector<wxPoint2DDouble> pts_a, pts_b;
+                pts_a.reserve(spec.gradient_samples.size());
+                pts_b.reserve(spec.gradient_samples.size());
+                for (const auto& [t, r] : spec.gradient_samples) {
+                    pts_a.push_back({plot.x + t * plot.width, plot.y + (1.0 - r) * plot.height});
+                    pts_b.push_back({plot.x + t * plot.width, plot.y + r * plot.height});
+                }
+                // Control-point anchors of the stored curve on the first component's line.
+                anchors.reserve(spec.gradient_anchors.size());
+                for (const auto& [t, r] : spec.gradient_anchors)
+                    anchors.push_back({plot.x + t * plot.width, plot.y + (1.0 - r) * plot.height});
+                curves.push_back({std::move(pts_a), col_a, 4});
+                curves.push_back({std::move(pts_b), col_b, 2});
+            }
+            draw_mixed_gradient_plot(pdc, rc.GetSize(), curves, anchors, grad_theme);
+        }
+    });
+
+    // Fixed DIP size, left-aligned: the visualization keeps its proportions no matter how the
+    // dialog is resized (the paint handler draws into whatever client rect the panel ends up
+    // with, so nothing else has to change). Sizes mirror the MixedFilamentDialog controls: the
+    // gradient plot and triangle picker match the editor's 260x200 / 160x160, the ratio bar is
+    // the dialog's 27px bar plus its label line.
+    int viz_h;
+    int viz_w;
+    if (spec.is_gradient) {
+        viz_w = 260;
+        viz_h = 200;
+    } else if (spec.tri_weights.size() == 3 && spec.component_colours.size() == 3) {
+        viz_w = 160;
+        viz_h = 160;
+    } else {
+        viz_w = 240;
+        viz_h = spec.component_colours.size() == 2 ? 50 : 30;
+    }
+    const wxSize viz_sz(FromDIP(viz_w), FromDIP(viz_h));
+    viz->SetMinSize(viz_sz);
+    viz->SetMaxSize(viz_sz);
+    // Parented to the page right above the scroll area, so it is always shown with the tab:
+    // the "Enable" toggle keeps gating only the rows/info below, never this preview.
+    wxSizer* page_sizer = category.page->GetSizer();
+    int scroll_idx      = -1;
+    for (size_t i = 0; i < page_sizer->GetChildren().size(); ++i)
+        if (page_sizer->GetChildren()[i]->GetWindow() == category.scroll) {
+            scroll_idx = int(i);
+            break;
+        }
+    if (scroll_idx < 0)
+        page_sizer->Add(viz, 0, wxLEFT | wxRIGHT | wxTOP, FromDIP(10)); // defensive: no scroll item
+    else
+        page_sizer->Insert(scroll_idx, viz, 0, wxLEFT | wxRIGHT | wxTOP, FromDIP(10));
+}
+
+void PublishSettingsDialog::set_row_bold(Row& row, bool bold)
+{
+    // Rebase on the dialog's body font so clearing bold restores the exact original font.
+    row.check->SetFont(bold ? Label::Body_13.Bold() : Label::Body_13);
+}
+
+void PublishSettingsDialog::save_scroll_position(Category& category)
+{
+    if (category.scroll != nullptr)
+        category.scroll->GetViewStart(&category.scroll_pos.x, &category.scroll_pos.y);
+}
+
+void PublishSettingsDialog::show_outer_page(size_t section_index)
+{
+    if (section_index >= m_sections.size())
+        return;
+    if (m_selected_outer >= 0 && m_selected_outer < static_cast<int>(m_sections.size())) {
+        SectionGroup& old_section = m_sections[m_selected_outer];
+        if (old_section.selected_inner >= 0 && old_section.selected_inner < static_cast<int>(old_section.categories.size()))
+            save_scroll_position(m_categories[old_section.categories[old_section.selected_inner]]);
+        if (old_section.selected_mixed >= 0 && old_section.selected_mixed < static_cast<int>(old_section.mixed_categories.size()))
+            save_scroll_position(m_categories[old_section.mixed_categories[old_section.selected_mixed]]);
+        m_sections[m_selected_outer].page->Hide();
+    }
+    m_selected_outer      = static_cast<int>(section_index);
+    SectionGroup& section = m_sections[section_index];
+    section.page->Show();
+    // Restore whichever tab row (physical or mixed) was active.
+    if (section.selected_inner >= 0)
+        show_inner_page(section_index, section.selected_inner);
+    else if (section.selected_mixed >= 0)
+        show_mixed_page(section_index, section.selected_mixed);
+    m_outer_host_sizer->Layout();
+}
+
+void PublishSettingsDialog::show_inner_page(size_t section_index, int inner_index)
+{
+    if (section_index >= m_sections.size())
+        return;
+    SectionGroup& section = m_sections[section_index];
+    if (inner_index < 0 || inner_index >= static_cast<int>(section.categories.size()))
+        return;
+    if (section.selected_inner >= 0 && section.selected_inner < static_cast<int>(section.categories.size())) {
+        save_scroll_position(m_categories[section.categories[section.selected_inner]]);
+        m_categories[section.categories[section.selected_inner]].page->Hide();
+    }
+    if (section.selected_mixed >= 0 && section.selected_mixed < static_cast<int>(section.mixed_categories.size())) {
+        save_scroll_position(m_categories[section.mixed_categories[section.selected_mixed]]);
+        m_categories[section.mixed_categories[section.selected_mixed]].page->Hide();
+        section.selected_mixed = -1;
+    }
+    section.selected_inner = inner_index;
+    Category& category     = m_categories[section.categories[inner_index]];
+    category.page->Show();
+    category.scroll->FitInside();
+    category.scroll->Scroll(category.scroll_pos.x, category.scroll_pos.y);
+    if (section.mixed_tabs != nullptr)
+        section.mixed_tabs->Unselect();
+    section.page_host_sizer->Layout();
+}
+
+void PublishSettingsDialog::show_mixed_page(size_t section_index, int mixed_index)
+{
+    if (section_index >= m_sections.size())
+        return;
+    SectionGroup& section = m_sections[section_index];
+    if (mixed_index < 0 || mixed_index >= static_cast<int>(section.mixed_categories.size()))
+        return;
+    if (section.selected_mixed >= 0 && section.selected_mixed < static_cast<int>(section.mixed_categories.size())) {
+        save_scroll_position(m_categories[section.mixed_categories[section.selected_mixed]]);
+        m_categories[section.mixed_categories[section.selected_mixed]].page->Hide();
+    }
+    if (section.selected_inner >= 0 && section.selected_inner < static_cast<int>(section.categories.size())) {
+        save_scroll_position(m_categories[section.categories[section.selected_inner]]);
+        m_categories[section.categories[section.selected_inner]].page->Hide();
+        section.selected_inner = -1;
+    }
+    section.selected_mixed = mixed_index;
+    Category& category     = m_categories[section.mixed_categories[mixed_index]];
+    category.page->Show();
+    category.scroll->FitInside();
+    category.scroll->Scroll(category.scroll_pos.x, category.scroll_pos.y);
+    section.tabs->Unselect();
+    section.page_host_sizer->Layout();
+}
+
+void PublishSettingsDialog::on_outer_tab_changed(wxCommandEvent& event)
+{
+    const int selection = event.GetInt();
+    if (selection >= 0 && selection < static_cast<int>(m_sections.size()))
+        show_outer_page(static_cast<size_t>(selection));
+}
+
+void PublishSettingsDialog::on_inner_tab_changed(size_t section_index, wxCommandEvent& event)
+{
+    const int selection = event.GetInt();
+    if (section_index < m_sections.size() && selection >= 0 && selection < static_cast<int>(m_sections[section_index].categories.size()))
+        show_inner_page(section_index, selection);
+}
+
+void PublishSettingsDialog::on_mixed_tab_changed(size_t section_index, wxCommandEvent& event)
+{
+    const int selection = event.GetInt();
+    if (section_index < m_sections.size() && selection >= 0 &&
+        selection < static_cast<int>(m_sections[section_index].mixed_categories.size()))
+        show_mixed_page(section_index, selection);
+}
+
+void PublishSettingsDialog::bind_tab_events()
+{
+    m_outer_tabs->Bind(wxEVT_TAB_SEL_CHANGED, &PublishSettingsDialog::on_outer_tab_changed, this);
+    for (size_t section_index = 0; section_index < m_sections.size(); ++section_index) {
+        m_sections[section_index].tabs->Bind(wxEVT_TAB_SEL_CHANGED,
+                                             [this, section_index](wxCommandEvent& event) { on_inner_tab_changed(section_index, event); });
+        if (m_sections[section_index].mixed_tabs != nullptr)
+            m_sections[section_index].mixed_tabs->Bind(wxEVT_TAB_SEL_CHANGED, [this, section_index](wxCommandEvent& event) {
+                on_mixed_tab_changed(section_index, event);
+            });
+    }
+}
+
+void PublishSettingsDialog::apply_filter(const wxString& filter_text)
+{
+    m_filter_mode = FilterMode::Text;
+    refresh_filter(filter_text.Lower());
+}
+
+void PublishSettingsDialog::apply_pseudo_filter(bool selected_only)
+{
+    m_filter_mode = selected_only ? FilterMode::SelectedOnly : FilterMode::UnselectedOnly;
+    refresh_filter(wxString()); // the pseudo modes ignore the search text
+}
+
+void PublishSettingsDialog::refresh_filter(const wxString& filter)
+{
+    Freeze();
+    const bool pseudo       = m_filter_mode != FilterMode::Text;
+    const bool want_checked = m_filter_mode == FilterMode::SelectedOnly;
+    m_fb_sizer->Show(!pseudo);
+    if (pseudo) {
+        // "×" marks the chip as a dismissible filter state (U+00D7, present in all UI fonts).
+        m_pseudo_chip->SetLabel((want_checked ? _L("Filter selected") : _L("Filter non-selected")) + " " + wxString::FromUTF8("\u00d7"));
+    }
+    m_pseudo_chip->Show(pseudo);
+
+    // Row matches are computed first; page and optgroup visibility is applied below.
+    if (pseudo) {
+        for (Row& row : m_rows)
+            row.matches_filter = row.check->IsEnabled() && row.check->GetValue() == want_checked;
+    } else {
+        const bool clear = filter.IsEmpty();
+        for (Row& row : m_rows) {
+            row.matches_filter = clear || (row.section_title + " " + row.category + " " + row.subcategory + " " + row.label + " " +
+                                           row.value + " " + row.unit)
+                                              .Lower()
+                                              .Contains(filter);
+        }
+    }
+
+    size_t first_outer    = 0;
+    int first_inner       = -1;
+    bool active_has_match = false;
+    for (size_t s = 0; s < m_sections.size(); ++s) {
+        for (size_t inner = 0; inner < m_sections[s].categories.size(); ++inner) {
+            Category& category = m_categories[m_sections[s].categories[inner]];
+            bool has_match     = false;
+            for (size_t r : category.rows)
+                has_match = has_match || m_rows[r].matches_filter;
+            category.info->Show(!has_match);
+            if (!has_match)
+                // A mixed slot has no selectable rows: always explain it is published whole.
+                category.info->SetLabel(category.is_mixed ? m_info_mix :
+                                                            (pseudo ? (want_checked ? m_info_nonsel : m_info_allsel) : m_info_empty));
+            if (has_match && first_inner < 0) {
+                first_outer = s;
+                first_inner = static_cast<int>(inner);
+            }
+            if (static_cast<int>(s) == m_selected_outer && static_cast<int>(inner) == m_sections[s].selected_inner)
+                active_has_match = has_match;
+        }
+        // Mixed slots have no rows: they can never match a filter, so they always fall back to
+        // their explanatory hint (shown once the slot is enabled).
+        for (size_t mixed : m_sections[s].mixed_categories) {
+            Category& category = m_categories[mixed];
+            category.info->Show(true);
+            category.info->SetLabel(m_info_mix);
+        }
+    }
+    if (!active_has_match && first_inner >= 0 &&
+        (m_selected_outer != static_cast<int>(first_outer) || m_sections[first_outer].selected_inner != first_inner)) {
+        if (m_selected_outer != static_cast<int>(first_outer)) {
+            m_outer_tabs->SelectItem(static_cast<int>(first_outer));
+            show_outer_page(first_outer);
+        }
+        m_sections[first_outer].tabs->SelectItem(first_inner);
+        show_inner_page(first_outer, first_inner);
+    }
+
+    apply_visibility();
+    for (Category& category : m_categories) {
+        save_scroll_position(category);
+        category.scroll->FitInside();
+        category.list_sizer->Layout();
+        category.scroll->Scroll(category.scroll_pos.x, category.scroll_pos.y);
+    }
+    Layout();
+    Thaw();
+}
+
+void PublishSettingsDialog::apply_visibility()
+{
+    Freeze();
+    for (Category& category : m_categories) {
+        // A disabled material slot hides everything below its header (rows, info and the Full
+        // Publish line); enable it first to reveal its settings.
+        const bool enabled = category.section != Section::Material ||
+                             (category.enable_check != nullptr && category.enable_check->GetValue());
+        if (category.scroll != nullptr)
+            category.scroll->Show(enabled);
+        if (category.full_line_item != nullptr)
+            category.full_line_item->Show(enabled);
+        bool category_any = false;
+        for (size_t r : category.rows)
+            category_any = category_any || m_rows[r].matches_filter;
+        category.info->Show(enabled && !category_any);
+        for (Subcategory& sub : category.subs) {
+            bool sub_any = false;
+            for (size_t r : sub.rows)
+                sub_any = sub_any || m_rows[r].matches_filter;
+            if (sub.header != nullptr)
+                sub.item->Show(enabled && sub_any);
+            for (size_t r : sub.rows)
+                m_rows[r].item->Show(enabled && m_rows[r].matches_filter);
+        }
+        category.list_sizer->Layout();
+        category.scroll->FitInside();
+    }
+    Thaw();
+}
+
+void PublishSettingsDialog::select_all(bool value)
+{
+    // "All" skips disabled (gated) rows; "None" leaves a gated row's preserved value.
+    for (Row& row : m_rows)
+        if (row.check->IsEnabled())
+            row.check->SetValue(value);
+    // "All" also enables every material slot (so its rows/Full Publish become visible and the
+    // selection is actually exported); "None" disables them all again.
+    for (Category& cat : m_categories)
+        if (cat.section == Section::Material && cat.enable_check != nullptr)
+            cat.enable_check->SetValue(value);
+    // wxCheckBox::SetValue does not emit wxEVT_CHECKBOX, so re-run the enable handlers to
+    // propagate mixed-slot components and refresh visibility as if the user had clicked.
+    for (size_t c = 0; c < m_categories.size(); ++c)
+        if (m_categories[c].section == Section::Material)
+            on_enable_toggle(c);
+    apply_visibility();
+    refresh_tab_indicators();
+}
+
+bool PublishSettingsDialog::row_is_visible(const Row& row) const
+{
+    if (m_selected_outer < 0 || m_selected_outer >= static_cast<int>(m_sections.size()) ||
+        row.outer_index != static_cast<size_t>(m_selected_outer) || m_sections[m_selected_outer].selected_inner < 0 ||
+        m_sections[m_selected_outer].selected_inner >= static_cast<int>(m_sections[m_selected_outer].categories.size()) ||
+        row.inner_index != m_sections[m_selected_outer].categories[m_sections[m_selected_outer].selected_inner] || !row.matches_filter ||
+        !row.check->IsEnabled())
+        return false;
+    return row.item->IsShown();
+}
+
+void PublishSettingsDialog::select_visible(bool value)
+{
+    // In a pseudo-filter view the rows being toggled would all disappear; drop the filter
+    // afterwards so the result stays visible.
+    const bool clear_pseudo = (m_filter_mode == FilterMode::UnselectedOnly && !value) ||
+                              (m_filter_mode == FilterMode::SelectedOnly && value);
+
+    // Toggle the rows visible under the *current* filter.
+    for (Row& row : m_rows)
+        if (row_is_visible(row))
+            row.check->SetValue(value);
+
+    if (clear_pseudo) {
+        // Note: SetValue() may fire wxEVT_TEXT on some platforms, re-entering apply_filter() -
+        // that is fine; the rows above were already toggled and the trailing call is idempotent.
+        m_filter_ctrl->ChangeValue("");
+        apply_filter(""); // resync visibility and the All/None bar
+    }
+    refresh_tab_indicators();
+}
+
+void PublishSettingsDialog::show_menu(wxMouseEvent& evt)
+{
+    bool filtering  = !m_filter_ctrl->GetValue().IsEmpty() || m_filter_mode != FilterMode::Text;
+    bool list_empty = true;
+    if (m_selected_outer >= 0) {
+        for (const Row& row : m_rows)
+            if (row_is_visible(row)) {
+                list_empty = false;
+                break;
+            }
+    }
+
+    wxMenu m;
+    m.Append(kPublishSelectAll, _L("Select All"))->Enable(!filtering);
+    m.Append(kPublishDeselectAll, _L("Deselect All"))->Enable(!filtering);
+    m.AppendSeparator();
+    m.Append(kPublishSelectVisible, _L("Select visible"))->Enable(!list_empty && filtering);
+    m.Append(kPublishDeselectVisible, _L("Deselect visible"))->Enable(!list_empty && filtering);
+    m.AppendSeparator();
+    m.AppendCheckItem(kPublishFilterSelected, _L("Filter selected"));
+    m.AppendCheckItem(kPublishFilterNonSelected, _L("Filter non-selected"));
+    m.Check(kPublishFilterSelected, m_filter_mode == FilterMode::SelectedOnly);
+    m.Check(kPublishFilterNonSelected, m_filter_mode == FilterMode::UnselectedOnly);
+
+    m.Bind(
+        wxEVT_MENU,
+        [this](wxCommandEvent& e) {
+            switch (e.GetId()) {
+            case kPublishSelectAll: select_all(true); break;
+            case kPublishDeselectAll: select_all(false); break;
+            case kPublishSelectVisible: select_visible(true); break;
+            case kPublishDeselectVisible: select_visible(false); break;
+            case kPublishFilterSelected:
+                // Clicking the active entry again clears the pseudo filter.
+                if (m_filter_mode == FilterMode::SelectedOnly)
+                    apply_filter(m_filter_ctrl->GetValue());
+                else
+                    apply_pseudo_filter(true);
+                break;
+            case kPublishFilterNonSelected:
+                if (m_filter_mode == FilterMode::UnselectedOnly)
+                    apply_filter(m_filter_ctrl->GetValue());
+                else
+                    apply_pseudo_filter(false);
+                break;
+            default: break;
+            }
+        },
+        kPublishSelectAll, kPublishFilterNonSelected);
+
+    wxWindow* src = dynamic_cast<wxWindow*>(evt.GetEventObject());
+    if (!src)
+        return;
+    wxPoint screen_pos = src->ClientToScreen(evt.GetPosition());
+    wxPoint local_pos  = ScreenToClient(screen_pos);
+    PopupMenu(&m, local_pos);
+}
+
+void PublishSettingsDialog::apply_selection(const std::vector<std::string>& published_keys,
+                                            const std::vector<Slic3r::PublishedMaterialEntry>& material_keys)
+{
+    // The supplied selection is authoritative: clear the dirty-default pre-check first so a
+    // dirty key the user deselected stays off, then re-select exactly what the selection names.
+    for (Row& row : m_rows)
+        if (row.check != nullptr)
+            row.check->SetValue(false);
+    for (Category& cat : m_categories) {
+        if (cat.section != Section::Material)
+            continue;
+        if (cat.enable_check != nullptr)
+            cat.enable_check->SetValue(false);
+        if (cat.full_check != nullptr)
+            cat.full_check->SetValue(false);
+    }
+
+    // Print / printer rows: match by exact row key (the full "#N" opt_id where present).
+    for (const std::string& key : published_keys)
+        for (Row& row : m_rows)
+            if ((row.section == Section::Print || row.section == Section::Printer) && row.check != nullptr && row.key == key) {
+                row.check->SetValue(true);
+                break;
+            }
+
+    // Per-slot material selections, applied positionally by slot.
+    for (const Slic3r::PublishedMaterialEntry& entry : material_keys) {
+        if (entry.slot < 0)
+            continue;
+        bool entry_mixed = false;
+        for (const std::string& k : entry.keys)
+            if (publish_mixed_keys().count(publish_base_key(k)) != 0) {
+                entry_mixed = true;
+                break;
+            }
+        size_t cat_idx = size_t(-1);
+        for (size_t c = 0; c < m_categories.size(); ++c) {
+            const Category& cat = m_categories[c];
+            if (cat.section != Section::Material || cat.is_mixed != entry_mixed || cat.filament_slot != size_t(entry.slot))
+                continue;
+            cat_idx = c;
+            break;
+        }
+        if (cat_idx == size_t(-1))
+            continue; // slot not present in the receiver (out of range / skipped)
+        Category& cat = m_categories[cat_idx];
+        if (cat.enable_check != nullptr) {
+            cat.enable_check->SetValue(true);
+            on_enable_toggle(cat_idx);
+        }
+        if (entry.full && cat.full_check != nullptr) {
+            cat.full_check->SetValue(true);
+            on_full_toggle(cat_idx);
+        } else {
+            // Setting rows are keyed by the base key.
+            for (const std::string& key : entry.keys) {
+                const std::string base = publish_base_key(key);
+                for (const size_t r : cat.rows) {
+                    Row& row = m_rows[r];
+                    if (row.kind == RowKind::Setting && row.key == base) {
+                        row.check->SetValue(true);
+                        break;
+                    }
+                }
+            }
+            if (entry.publish_type && !entry.publish_type_value.empty())
+                for (const size_t r : cat.rows)
+                    if (m_rows[r].kind == RowKind::Type && m_rows[r].check != nullptr) {
+                        m_rows[r].check->SetValue(true);
+                        break;
+                    }
+            if (entry.publish_color && !entry.color.empty())
+                for (const size_t r : cat.rows)
+                    if (m_rows[r].kind == RowKind::Color && m_rows[r].check != nullptr) {
+                        m_rows[r].check->SetValue(true);
+                        break;
+                    }
+        }
+    }
+
+    apply_visibility();
+    refresh_tab_indicators();
+}
+
+std::vector<std::string> PublishSettingsDialog::GetPublishedKeys() const
+{
+    std::vector<std::string> out;
+    // Process and printer sections both travel through published_keys (the load-side overlay
+    // applies process keys to the prints edited preset and the allowlisted printer keys to the
+    // printers edited preset); material keys use a separate API. Printer rows carry the full
+    // per-extruder "#N" opt_id (built in Phase 1), so a checked row publishes exactly that
+    // extruder's value - per-extruder selection is independent.
+    for (const Row& row : m_rows) {
+        if ((row.section != Section::Print && row.section != Section::Printer) || !row.check->GetValue())
+            continue;
+        out.push_back(row.key);
+    }
+    return out;
+}
+
+std::vector<MixedDependencyIssue> PublishSettingsDialog::unpublished_mixed_components() const
+{
+    std::vector<MixedDependencyIssue> out;
+    for (const Category& cat : m_categories) {
+        if (!cat.is_mixed || cat.section != Section::Material)
+            continue;
+        // Only enabled mixed slots depend on their components being published.
+        if (cat.enable_check == nullptr || !cat.enable_check->GetValue())
+            continue;
+        const DynamicPrintConfig full = wxGetApp().preset_bundle->full_config();
+        // Components are 1-based physical filament indices.
+        for (const unsigned int component : mixed_slot_components(full, cat.filament_slot)) {
+            const size_t component_slot = size_t(component) - 1;
+            // Find the component slot's material category (one exists per physical slot).
+            const Category* comp_cat = nullptr;
+            for (const Category& other : m_categories) {
+                if (other.section == Section::Material && !other.is_mixed && other.filament_slot == component_slot) {
+                    comp_cat = &other;
+                    break;
+                }
+            }
+            if (comp_cat == nullptr || comp_cat->enable_check == nullptr)
+                continue;
+            // Missing when the component's "Enable" is off, or it is enabled with neither
+            // "Full Publish" nor the "Type" requirement row checked. Colour never counts:
+            // the receiver renders the mix from its own components' colours.
+            if (!comp_cat->enable_check->GetValue()) {
+                out.push_back({cat.filament_slot, component_slot, MixedDependencyIssue::Reason::Disabled});
+                continue;
+            }
+            if (comp_cat->full_check != nullptr && comp_cat->full_check->GetValue())
+                continue;
+            bool type_checked = false;
+            for (const size_t r : comp_cat->rows) {
+                const Row& row = m_rows[r];
+                if (row.kind == RowKind::Type && row.check->GetValue()) {
+                    type_checked = true;
+                    break;
+                }
+            }
+            if (!type_checked)
+                out.push_back({cat.filament_slot, component_slot, MixedDependencyIssue::Reason::MaterialNotPublished});
+        }
+    }
+    // Deterministic order for the warning rows: by mixed slot, then component slot. The same
+    // (mix, component) pair cannot repeat: each mix's components come from a config list.
+    std::sort(out.begin(), out.end(), [](const MixedDependencyIssue& a, const MixedDependencyIssue& b) {
+        return std::tie(a.mixed_slot, a.component_slot) < std::tie(b.mixed_slot, b.component_slot);
+    });
+    return out;
+}
+
+std::vector<Slic3r::PublishedMaterialEntry> PublishSettingsDialog::GetPublishedMaterialKeys() const
+{
+    std::vector<Slic3r::PublishedMaterialEntry> out;
+    for (const Category& cat : m_categories) {
+        if (cat.section != Section::Material)
+            continue;
+        // A slot that is not "Enable"d publishes nothing at all.
+        if (cat.enable_check != nullptr && !cat.enable_check->GetValue())
+            continue;
+        Slic3r::PublishedMaterialEntry entry;
+        entry.filament_type   = cat.filament_type;
+        entry.filament_vendor = cat.filament_vendor;
+        entry.filament_id     = cat.filament_id;
+        entry.slot            = static_cast<int>(cat.filament_slot);
+        // The author's preset id distinguishes exact variants that share filament_id
+        // ("Generic PLA" vs "Generic PLA Matte"), so the receiver can match precisely; the
+        // preset name is the most direct identity and is matched first on load.
+        PresetBundle* bundle = wxGetApp().preset_bundle;
+        if (bundle != nullptr && cat.filament_slot < bundle->filament_presets.size()) {
+            if (const Preset* preset = bundle->filaments.find_preset(bundle->filament_presets[cat.filament_slot], false, true)) {
+                entry.setting_id  = preset->setting_id;
+                entry.preset_name = preset->name;
+            }
+        }
+        // A mixed slot publishes as one unit: its definition (components, ratios, gradient)
+        // always travels (its Enable implies this), and the component filaments are enabled +
+        // Full Published by on_enable_toggle into their own entries.
+        if (cat.is_mixed) {
+            Slic3r::PublishedMaterialEntry mixed_entry;
+            mixed_entry.filament_type   = cat.filament_type;
+            mixed_entry.filament_vendor = cat.filament_vendor;
+            mixed_entry.filament_id     = cat.filament_id;
+            mixed_entry.slot            = static_cast<int>(cat.filament_slot);
+            // The mix's own colour (blended) is a property of the definition, not a
+            // requirement row; carry it so the receiver renders the swatch.
+            const DynamicPrintConfig full_cfg = wxGetApp().preset_bundle->full_config();
+            const std::string mix_color       = filament_color_hex(full_cfg, cat.filament_slot);
+            if (!mix_color.empty()) {
+                mixed_entry.publish_color = true;
+                mixed_entry.color         = mix_color;
+            }
+            for (const std::string& key : publish_mixed_keys())
+                mixed_entry.keys.emplace_back(key);
+            out.push_back(std::move(mixed_entry));
+            continue;
+        }
+        // "Full Publish": the whole filament preset is embedded; type and colour are implicitly
+        // published, and the per-key rows are disabled / their state ignored.
+        if (cat.full_check != nullptr && cat.full_check->GetValue()) {
+            entry.full               = true;
+            entry.full_keys          = full_keys_for_slot();
+            entry.publish_type       = true;
+            entry.publish_type_value = normalize_filament_type(cat.filament_type);
+            for (size_t r : cat.rows) {
+                const Row& row = m_rows[r];
+                if (row.kind == RowKind::Color && !row.value.IsEmpty()) {
+                    entry.publish_color = true;
+                    entry.color         = row.value.ToStdString();
+                }
+            }
+            out.push_back(std::move(entry));
+            continue;
+        }
+        for (size_t r : cat.rows) {
+            const Row& row = m_rows[r];
+            if (!row.check->GetValue())
+                continue;
+            if (row.kind == RowKind::Color) {
+                entry.publish_color = true;
+                entry.color         = row.value.ToStdString();
+            } else if (row.kind == RowKind::Type) {
+                entry.publish_type       = true;
+                entry.publish_type_value = row.value.ToStdString();
+            } else {
+                entry.keys.push_back(row.key);
+            }
+        }
+        // Nothing checked at all -> nothing to write.
+        if (!entry.keys.empty() || entry.publish_type || entry.publish_color)
+            out.push_back(std::move(entry));
+    }
+    return out;
+}
+
+bool PublishSettingsDialog::category_has_selection(const Category& cat) const
+{
+    // A material slot publishes (or not) as a whole, gated by "Enable".
+    if (cat.section == Section::Material)
+        return cat.enable_check != nullptr && cat.enable_check->GetValue();
+    // Print/Printer categories have no gate: any checked row counts.
+    for (const size_t r : cat.rows)
+        if (m_rows[r].check->GetValue())
+            return true;
+    return false;
+}
+
+void PublishSettingsDialog::refresh_tab_indicators()
+{
+    for (size_t s = 0; s < m_sections.size(); ++s) {
+        SectionGroup& section = m_sections[s];
+        bool any              = false;
+        for (size_t i = 0; i < section.categories.size(); ++i) {
+            const bool on = category_has_selection(m_categories[section.categories[i]]);
+            section.tabs->SetItemIndicator(static_cast<unsigned int>(i), on);
+            any = any || on;
+        }
+        if (section.mixed_tabs != nullptr)
+            for (size_t i = 0; i < section.mixed_categories.size(); ++i) {
+                const bool on = category_has_selection(m_categories[section.mixed_categories[i]]);
+                section.mixed_tabs->SetItemIndicator(static_cast<unsigned int>(i), on);
+                any = any || on;
+            }
+        m_outer_tabs->SetItemIndicator(static_cast<unsigned int>(s), any);
+    }
+}
+
+std::vector<std::string> PublishSettingsDialog::full_keys_for_slot() const
+{
+    // The canonical filament preset keys minus the structural keys the published overlay must
+    // never touch (inherits, compatibility, *_settings_id, ...), plus filament_colour (not a
+    // member of Preset::filament_options). Values travel in the exported config, masked to
+    // this slot, and are applied on load onto the receiver's slot.
+    const std::set<std::string>& denylist = publish_structural_keys();
+    std::vector<std::string> keys;
+    for (const std::string& key : Preset::filament_options())
+        if (denylist.count(key) == 0)
+            keys.emplace_back(key);
+    keys.emplace_back("filament_colour");
+    return keys;
+}
+
+void PublishSettingsDialog::on_dpi_changed(const wxRect& suggested_rect)
+{
+    // Rescale toolbar bitmaps and icons; collapse chevrons are vector-drawn and repaint.
+    m_search.msw_rescale();
+    m_menu.msw_rescale();
+    m_filter_box->SetIcon(m_search.bmp());
+    m_menu_button->SetBitmap(m_menu.bmp());
+    m_outer_tabs->Rescale();
+
+    const DynamicPrintConfig full = wxGetApp().preset_bundle->full_config();
+
+    for (Category& cat : m_categories) {
+        if (cat.full_check != nullptr)
+            cat.full_check->Refresh();
+        if (cat.enable_check != nullptr)
+            cat.enable_check->Refresh();
+        if (cat.title_label != nullptr)
+            cat.title_label->Refresh();
+        if (cat.filament_color_chip != nullptr) {
+            // Mixed pages have no header chip; this only ever fires for physical slots.
+            if (wxBitmap* chip = get_extruder_color_icon(filament_color_hex(full, cat.filament_slot), std::to_string(cat.filament_slot + 1),
+                                                         FromDIP(20), FromDIP(20))) {
+                cat.filament_color_chip->SetBitmap(*chip);
+            }
+        }
+        cat.scroll->FitInside();
+        cat.list_sizer->Layout();
+    }
+
+    for (size_t s = 0; s < m_sections.size(); ++s) {
+        SectionGroup& section = m_sections[s];
+        section.icon_bmp.msw_rescale();
+        if (section.icon_bmp.bmp().IsOk())
+            m_outer_tabs->SetItemBitmap(s, section.icon_bmp.bmp());
+        section.tabs->Rescale();
+        if (section.mixed_tabs != nullptr)
+            section.mixed_tabs->Rescale();
+    }
+
+    // Refresh the per-row Color chips at the new DPI (they carry the slot number too).
+    for (Row& row : m_rows) {
+        if (row.color_chip != nullptr && !row.value.IsEmpty()) {
+            const std::string chip_label = (row.inner_index < m_categories.size()) ?
+                                               std::to_string(m_categories[row.inner_index].filament_slot + 1) :
+                                               "";
+            if (wxBitmap* chip = get_extruder_color_icon(row.value.ToStdString(), chip_label, FromDIP(20), FromDIP(20)))
+                row.color_chip->SetBitmap(*chip);
+        }
+    }
+
+    for (size_t category_index = 0; category_index < m_categories.size(); ++category_index) {
+        const Category& category = m_categories[category_index];
+        if (category.section != Section::Material || category.is_mixed)
+            continue;
+        if (wxBitmap* chip = get_extruder_color_icon(filament_color_hex(full, category.filament_slot),
+                                                     std::to_string(category.filament_slot + 1), FromDIP(20), FromDIP(20))) {
+            const SectionGroup& section = m_sections[category.group];
+            const auto iter             = std::find(section.categories.begin(), section.categories.end(), category_index);
+            if (iter != section.categories.end())
+                m_sections[category.group].tabs->SetItemBitmap(static_cast<unsigned int>(iter - section.categories.begin()), *chip);
+        }
+    }
+    refresh_mixed_tab_bitmaps();
+
+    fit_to_content(); // tab buttons' min widths grew with the DPI: re-fit (incl. resize floor)
+    Refresh();
+}
+
+void PublishSettingsDialog::refresh_mixed_tab_bitmaps()
+{
+    // The mixed-tab composition bitmaps bake the tab strip's background colour and DPI-scaled
+    // text, so both a theme flip and a DPI change have to rebuild them.
+    const DynamicPrintConfig full = wxGetApp().preset_bundle->full_config();
+    for (SectionGroup& section : m_sections) {
+        if (section.mixed_tabs == nullptr)
+            continue;
+        const wxColour tab_bg = section.mixed_tabs->GetBackgroundColour();
+        for (size_t i = 0; i < section.mixed_categories.size(); ++i) {
+            const Category& category = m_categories[section.mixed_categories[i]];
+            const wxBitmap tab_bmp   = mixed_filament_tab_bitmap(full, category.filament_slot, FromDIP(20), tab_bg);
+            if (tab_bmp.IsOk())
+                section.mixed_tabs->SetItemBitmap(static_cast<unsigned int>(i), tab_bmp);
+        }
+    }
+}
+
+void PublishSettingsDialog::on_sys_color_changed()
+{
+    // The mixed-tab compositions bake the tab strip's background colour: rebuild them when the
+    // theme changes (on_dpi_changed covers rescales).
+    refresh_mixed_tab_bitmaps();
+    Refresh();
+}
+
+}} // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/PublishSettingsDialog.hpp b/src/slic3r/GUI/PublishSettingsDialog.hpp
new file mode 100644
index 0000000000..f41b3e73a3
--- /dev/null
+++ b/src/slic3r/GUI/PublishSettingsDialog.hpp
@@ -0,0 +1,286 @@
+#pragma once
+
+#include "GUI_Utils.hpp"
+#include "wxExtensions.hpp"
+#include "Widgets/TabCtrl.hpp"
+
+#include "libslic3r/PublishSettings.hpp"
+
+#include <wx/wx.h>
+#include <wx/colour.h>
+#include <wx/scrolwin.h>
+#include <wx/menu.h>
+#include <utility>
+#include <vector>
+#include <string>
+
+// Forward declarations (all are global classes, see Widgets/TextInput.hpp and
+// Widgets/StaticLine.hpp).
+class TextInput;
+class StaticLine;
+
+namespace Slic3r { namespace GUI {
+
+struct PublishMaterialIdentity
+{
+    std::string type;
+    std::string vendor;
+    std::string id;
+};
+
+// One unmet dependency of an enabled mixed-filament slot: the component filament the mix uses
+// would ship without its material (either the component slot is not enabled at all, or it is
+// enabled with neither "Full Publish" nor the "Type" requirement checked). Slots are 0-based.
+struct MixedDependencyIssue
+{
+    enum class Reason { Disabled, MaterialNotPublished };
+    size_t mixed_slot{0};
+    size_t component_slot{0};
+    Reason reason{Reason::Disabled};
+};
+
+// Dialog letting a model author select which settings get embedded in a 3MF. Nested tab layout
+// mirroring the Process settings (Printer / Filament / Process outer tabs, category or material
+// tabs inside each). Dirty settings are pre-checked and shown bold; on OK the print rows become
+// "orca_published_keys" and the material rows become "orca_published_material_keys".
+class PublishSettingsDialog : public DPIDialog
+{
+public:
+    // Optional published selection (Feature A/B): when the caller supplies one (either a
+    // remembered session selection or the payload of a freshly loaded published 3MF) the dialog
+    // is seeded from it, overriding the dirty-default pre-check. A non-null pointer to an empty
+    // selection means "publish nothing" (an intentional empty state); a null pointer means "no
+    // remembered selection" (keep the dirty defaults).
+    PublishSettingsDialog(wxWindow* parent = nullptr,
+                          const std::vector<std::string>* published_keys = nullptr,
+                          const std::vector<Slic3r::PublishedMaterialEntry>* material_keys = nullptr);
+    ~PublishSettingsDialog();
+
+    // The selected print/printer setting keys (in display order); printer keys carry a '#N'
+    // per-extruder suffix.
+    std::vector<std::string> GetPublishedKeys() const;
+
+    // The selected keys grouped per material section (base keys, no '#N' suffix).
+    std::vector<Slic3r::PublishedMaterialEntry> GetPublishedMaterialKeys() const;
+
+protected:
+    void on_dpi_changed(const wxRect& suggested_rect) override;
+    void on_sys_color_changed() override;
+
+private:
+    void fit_to_content();
+    void refresh_mixed_tab_bitmaps();
+
+    // Which part of the settings the row/category came from.
+    enum class Section { Print, Printer, Material };
+
+    // One selectable setting row: a checkbox (setting name) plus a value label and an optional
+    // grey unit label. key is the full config key, possibly with a "#N" variant suffix
+    // (print/printer rows); material rows carry the base key.
+    enum class RowKind {
+        Setting, // a regular setting key
+        Color,   // material colour requirement (filament_colour)
+        Type,    // material type requirement (read-only text)
+    };
+    struct Row
+    {
+        std::string key;
+        wxString category;
+        wxString subcategory;
+        wxString label;
+        wxString value;
+        wxString unit;
+        wxString section_title; // outer tab title, for filter matching
+        Section section{Section::Print};
+        RowKind kind{RowKind::Setting};
+        size_t outer_index{0};
+        size_t inner_index{0};
+        bool dirty{false};          // matches a dirty base key: pre-checked + bold
+        bool matches_filter{false}; // survives the active filter (computed by apply_filter)
+        wxCheckBox* check{nullptr};
+        wxStaticText* value_label{nullptr};
+        wxStaticText* unit_label{nullptr};
+        wxStaticBitmap* color_chip{nullptr}; // Color rows only; swatch next to the value
+        wxSizerItem* item{nullptr};          // sizer item of this row's h-sizer in its tab list sizer
+    };
+
+    // An optgroup heading. Rows store indices into m_rows.
+    struct Subcategory
+    {
+        wxString title;
+        ::StaticLine* header{nullptr}; // null when the title is empty
+        wxSizerItem* item{nullptr};
+        std::vector<size_t> rows;
+    };
+
+    // An inner TabCtrl page with its material controls and content.
+    struct Category
+    {
+        wxString title;
+        Section section{Section::Print};
+        size_t group{0};        // index into m_sections / outer page
+        size_t source_index{0}; // stable source page or material slot index
+        wxPanel* page{nullptr};
+        wxScrolledWindow* scroll{nullptr};
+        wxBoxSizer* list_sizer{nullptr};
+        wxStaticText* info{nullptr};
+        wxPoint scroll_pos{0, 0};
+        wxStaticBitmap* filament_color_chip{nullptr};
+        wxStaticText* title_label{nullptr}; // material title (static text; Full Publish carries the label elsewhere)
+        // "Enable": while unchecked nothing of this slot is exported and everything below the
+        // header row is hidden. For physical slots the Full Publish toggle sits on a second
+        // line (full_line_item) visible only when enabled; for mixed slots Enable alone implies
+        // publishing the mix definition, so no Full Publish widget exists at all.
+        wxCheckBox* enable_check{nullptr};
+        wxSizerItem* full_line_item{nullptr}; // sizer item of the Full Publish line (physical slots only)
+        // "Full Publish": while checked, the whole slot preset is serialized and its rows
+        // (incl. Color/Type) are disabled.
+        wxCheckBox* full_check{nullptr};
+        // True for a mixed-color filament slot: no Material/Retraction rows; Enable publishes
+        // the slot's gradient/ratio definition as a whole.
+        bool is_mixed{false};
+        // Material identity, only for Section::Material categories.
+        std::string filament_type;
+        std::string filament_vendor;
+        std::string filament_id;
+        // The author's 0-based filament slot this material section represents.
+        size_t filament_slot{0};
+        std::vector<Subcategory> subs;
+        std::vector<size_t> rows; // flattened rows of this category
+    };
+
+    // Frozen snapshot of a mixed filament slot's definition for the read-only visualization
+    // painted on the slot's page. Plain data only: the paint handler must never touch the
+    // config. For gradient slots the curve is pre-sampled (t, ratio) pairs, where ratio is the
+    // first component's share over model height; anchors carry the raw control points.
+    struct MixedVisualSpec
+    {
+        bool valid{false};
+        bool is_gradient{false};
+        std::vector<wxColour> component_colours;   // colour per component, in config order
+        std::vector<double> ratios;                // sublayer shares summing to ~1 (non-gradient)
+        std::vector<double> tri_weights;           // 3-component mixes: barycentric shares
+        std::vector<std::pair<double, double>> gradient_samples;
+        std::vector<std::pair<double, double>> gradient_anchors;
+    };
+
+    // One outer TabCtrl page. Category entries are its inner tabs.
+    struct SectionGroup
+    {
+        wxString title;               // _L("Printer") / _L("Filament") / _L("Process")
+        Section kind{Section::Print}; // maps 1:1 to the display group
+        std::string icon_name;        // "printer" / "filament" / "process"
+        ScalableBitmap icon_bmp;      // tab icon next to the title; rescaled on DPI change
+        wxPanel* page{nullptr};
+        TabCtrl* tabs{nullptr};
+        // Second tab strip, below the main one, listing only the mixed-color filament slots.
+        // Present on the Material section only (null elsewhere).
+        TabCtrl* mixed_tabs{nullptr};
+        wxPanel* page_host{nullptr};
+        wxBoxSizer* page_host_sizer{nullptr};
+        int selected_inner{-1};
+        // Selected mixed tab (index into mixed_categories), valid while a mixed slot page is shown.
+        int selected_mixed{-1};
+        std::vector<size_t> categories;      // indices into m_categories (physical slots)
+        std::vector<size_t> mixed_categories; // indices into m_categories (mixed slots)
+    };
+
+    void build_option_model();
+    // Seed the dialog from a published selection (print/printer keys + per-slot material keys):
+    // the supplied selection is authoritative - it is applied after the dirty pre-check and
+    // overrides it, so deselected dirty keys stay off. Rows/slots not present in the selection
+    // are left unselected. Unknown or out-of-range entries are skipped gracefully.
+    void apply_selection(const std::vector<std::string>& published_keys,
+                         const std::vector<Slic3r::PublishedMaterialEntry>& material_keys);
+    // Frozen snapshot of a mixed slot's definition for the page visualization, resolved from
+    // the full config once at dialog-build time. Gradient slots pre-sample exactly what the
+    // slicer will print: the custom curve wins over the gradient_range endpoints over the
+    // 0.10 -> 0.90 default (the resolution FilamentBitmapUtils::mixed_gradient_curve mirrors).
+    static MixedVisualSpec make_mixed_visual_spec(const Slic3r::DynamicPrintConfig& full, size_t slot);
+    void apply_filter(const wxString& filter_text);
+    // Menu-only pseudo filters: show only the checked ("Filter selected") or only the
+    // unchecked ("Filter non-selected") rows. The search box keeps the user's text.
+    void apply_pseudo_filter(bool selected_only);
+    // Recompute row matches and visibility for the active filter mode. filter is the lowered
+    // search text; it is ignored by the pseudo modes.
+    void refresh_filter(const wxString& filter);
+    void select_all(bool value);
+    void select_visible(bool value);
+    void show_menu(wxMouseEvent& evt);
+    void set_row_bold(Row& row, bool bold);
+    // "Full Publish" toggled: disables/enables the material's rows.
+    void on_full_toggle(size_t category_index);
+    // "Enable" toggled on a material slot: reveals/hides everything below the header and, for a
+    // mixed slot, auto-selects its component filaments' "Enable" + "Full Publish" toggles.
+    void on_enable_toggle(size_t category_index);
+    // Whether a category currently publishes something, driving its tab's indicator dot.
+    // Print/Printer: any row checked. Material: the slot's "Enable" is on.
+    bool category_has_selection(const Category& cat) const;
+    // Recompute the indicator dot on every outer/inner tab from the current selection state.
+    void refresh_tab_indicators();
+    // Unmet dependencies of enabled mixed-filament slots, one record per (mix, component) pair:
+    // "Enable" not checked on the component, or enabled with neither "Full Publish" nor the
+    // "Type" requirement row checked. Colour is deliberately ignored (the receiver renders the
+    // mix from its own components' colours). Sorted by mixed slot, then component slot.
+    std::vector<MixedDependencyIssue> unpublished_mixed_components() const;
+    // Read-only visualization of a mixed slot's definition (a stacked ratio bar, or the
+    // Material Ratio vs Model Height graph for a gradient), inserted above the info hint
+    // inside the category's scroll area.
+    void add_mixed_visual(size_t category_index, const MixedVisualSpec& spec);
+    // Return/create the fixed outer page for a Section kind.
+    size_t section_group_for(Section kind);
+    size_t category_index_for(const wxString& title,
+                              Section section,
+                              size_t group,
+                              size_t source_index,
+                              const PublishMaterialIdentity& identity = PublishMaterialIdentity(),
+                              bool is_mixed                          = false);
+    size_t subcategory_index_for(size_t category_index, const wxString& title, const wxString& icon);
+    void add_row_ui(const std::string& key,
+                    const wxString& label,
+                    const wxString& value,
+                    const wxString& unit,
+                    size_t category_index,
+                    size_t subcategory_index,
+                    RowKind kind = RowKind::Setting);
+    // The non-structural filament keys of a slot's preset, for a "Full Publish" entry.
+    std::vector<std::string> full_keys_for_slot() const;
+    void save_scroll_position(Category& category);
+    void show_outer_page(size_t section_index);
+    void show_inner_page(size_t section_index, int inner_index);
+    void show_mixed_page(size_t section_index, int mixed_index);
+    void on_outer_tab_changed(wxCommandEvent& event);
+    void on_inner_tab_changed(size_t section_index, wxCommandEvent& event);
+    void on_mixed_tab_changed(size_t section_index, wxCommandEvent& event);
+    bool row_is_visible(const Row& row) const;
+    void apply_visibility();
+    void bind_tab_events();
+
+    TabCtrl* m_outer_tabs{nullptr};
+    wxPanel* m_outer_host{nullptr};
+    wxBoxSizer* m_outer_host_sizer{nullptr};
+    int m_selected_outer{-1};
+    wxBoxSizer* m_fb_sizer{nullptr}; // "All"/"None" buttons sizer
+    // Active filter mode: free text from the search box, or one of the menu's pseudo filters.
+    enum class FilterMode { Text, SelectedOnly, UnselectedOnly };
+    FilterMode m_filter_mode{FilterMode::Text};
+    TextInput* m_filter_box{nullptr};
+    wxTextCtrl* m_filter_ctrl{nullptr};
+    wxStaticBitmap* m_menu_button{nullptr};
+    // Shown while a pseudo filter is active (the search box keeps the user's text, so the chip
+    // carries the visible state); clicking it returns to text filtering.
+    wxStaticText* m_pseudo_chip{nullptr};
+    wxString m_info_nonsel;
+    wxString m_info_allsel;
+    wxString m_info_empty;
+    wxString m_info_mix; // body hint shown for a mixed slot (published as a whole)
+
+    ScalableBitmap m_search;
+    ScalableBitmap m_menu;
+
+    std::vector<Row> m_rows;
+    std::vector<Category> m_categories;
+    std::vector<SectionGroup> m_sections;
+};
+
+}} // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/RammingChart.cpp b/src/slic3r/GUI/RammingChart.cpp
index 96cd3b65a7..29116b12cb 100644
--- a/src/slic3r/GUI/RammingChart.cpp
+++ b/src/slic3r/GUI/RammingChart.cpp
@@ -7,6 +7,7 @@
 #include "GUI.hpp"
 #include "GUI_App.hpp"
 #include "I18N.hpp"
+#include "Widgets/StateColor.hpp"
 
 wxDEFINE_EVENT(EVT_WIPE_TOWER_CHART_CHANGED, wxCommandEvent);
 
diff --git a/src/slic3r/GUI/ReleaseNote.hpp b/src/slic3r/GUI/ReleaseNote.hpp
index 0c11dc2f58..cfd372bc97 100644
--- a/src/slic3r/GUI/ReleaseNote.hpp
+++ b/src/slic3r/GUI/ReleaseNote.hpp
@@ -35,6 +35,7 @@
 #include "Widgets/CheckBox.hpp"
 #include "Widgets/ComboBox.hpp"
 #include "Widgets/ScrolledWindow.hpp"
+#include "Widgets/HyperLink.hpp"
 #include <wx/hashmap.h>
 #include <wx/webview.h>
 
diff --git a/src/slic3r/GUI/Search.cpp b/src/slic3r/GUI/Search.cpp
index f8fc51ed02..eec03ebf62 100644
--- a/src/slic3r/GUI/Search.cpp
+++ b/src/slic3r/GUI/Search.cpp
@@ -62,7 +62,7 @@ static char marker_by_type(Preset::Type type, PrinterTechnology pt)
     }
 }
 
-std::string Option::opt_key() const { return into_u8(key).substr(2); }
+std::string Option::opt_key() const { return key.size() < 2 ? std::string() : into_u8(key).substr(2); }
 
 void FoundOption::get_marked_label_and_tooltip(const char **label_, const char **tooltip_) const
 {
@@ -116,6 +116,7 @@ void OptionsSearcher::append_options(DynamicPrintConfig *config, Preset::Type ty
             case coFloats: change_opt_key<ConfigOptionFloats>(opt_key, config, cnt); break;
             case coStrings: change_opt_key<ConfigOptionStrings>(opt_key, config, cnt); break;
             case coPercents: change_opt_key<ConfigOptionPercents>(opt_key, config, cnt); break;
+            case coFloatsOrPercents: change_opt_key<ConfigOptionVector<FloatOrPercent>>(opt_key, config, cnt); break;
             case coPoints: change_opt_key<ConfigOptionPoints>(opt_key, config, cnt); break;
             // BBS
             case coEnums: change_opt_key<ConfigOptionInts>(opt_key, config, cnt); break;
@@ -334,29 +335,46 @@ const Option &OptionsSearcher::get_option(size_t pos_in_filter) const
 
 const Option &OptionsSearcher::get_option(const std::string &opt_key, Preset::Type type, int &variant_index) const
 {
+    auto not_found = [&variant_index]() -> const Option& {
+        static const Option empty_option;
+        variant_index = -2;
+        return empty_option;
+    };
+
+    variant_index = -1;
     std::string opt_key2 = opt_key;
     if (auto n = opt_key.find('#'); n != std::string::npos) {
         variant_index = std::atoi(opt_key.c_str() + n + 1);
         opt_key2 = opt_key.substr(0, n);
     }
-    auto it = std::lower_bound(options.begin(), options.end(), Option({boost::nowide::widen(get_key(opt_key2, type))}));
-    // BBS: return the 0th option when not found in searcher caused by mode difference
-    // assert(it != options.end());
-    if (it == options.end()) { variant_index = -2 ; return options[0]; }
-    if (it->opt_key() == opt_key2) {
+    const std::wstring key = boost::nowide::widen(get_key(opt_key2, type));
+    auto it = std::lower_bound(options.begin(), options.end(), Option({key}));
+    if (it == options.end()) return not_found();
+    if (it->key == key) {
         variant_index = -1;
     } else {
-        const std::string opt_key3 = opt_key2 + "#";
-        it = std::lower_bound(it, options.end(), Option({boost::nowide::widen(get_key(opt_key3, type))}));
-        if (it == options.end() || it->opt_key().compare(0, opt_key3.length(), opt_key3) != 0) {
-            variant_index = -2; // Not found
-            return options[0];
+        const std::wstring prefix = key + L"#";
+        it = std::lower_bound(it, options.end(), Option({prefix}));
+        if (it == options.end() || it->key.compare(0, prefix.length(), prefix) != 0)
+            return not_found();
+        // Orca: Copy-parameters dialogs request the base key, without a vector index.
+        if (variant_index < 0) return *it;
+
+        const bool has_mode = type == Preset::TYPE_PRINTER && printer_options_with_variant_2.count(opt_key2) > 0;
+        const bool has_variant =
+            (type == Preset::TYPE_PRINT && print_options_with_variant.count(opt_key2) > 0) ||
+            (type == Preset::TYPE_FILAMENT && filament_options_with_variant.count(opt_key2) > 0) ||
+            (type == Preset::TYPE_PRINTER && printer_options_with_variant_1.count(opt_key2) > 0) || has_mode;
+        if (!has_variant || has_mode) {
+            // Orca: Machine limits store (Normal, Silent) pairs per variant; the UI registers only #0/#1.
+            const std::wstring indexed_key = has_mode ? prefix + std::to_wstring(variant_index % 2) :
+                                                       boost::nowide::widen(get_key(opt_key, type));
+            it = std::lower_bound(it, options.end(), Option({indexed_key}));
+            if (it == options.end() || it->key != indexed_key)
+                return not_found();
+            if (!has_variant)
+                variant_index = -1;
         }
-        auto it2 = it;
-        ++it2;
-        if (it2 != options.end() && it2->opt_key().compare(0, opt_key3.length(), opt_key3) == 0
-                && printer_options_with_variant_1.find(opt_key2) == printer_options_with_variant_1.end())
-            variant_index = -2;
     }
 
     return options[it - options.begin()];
diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp
index 41ee523fbe..629aef7296 100644
--- a/src/slic3r/GUI/SelectMachine.cpp
+++ b/src/slic3r/GUI/SelectMachine.cpp
@@ -3073,7 +3073,7 @@ static bool _HasExt(const std::vector<FilamentInfo> &ams_mapping_result) {
     };
 
     for (const auto &info : ams_mapping_result) {
-        if (info.ams_id == VIRTUAL_AMS_MAIN_ID_STR || info.ams_id == VIRTUAL_AMS_DEPUTY_ID_STR && !info.ams_id.empty()) {
+        if (info.ams_id == VIRTUAL_AMS_MAIN_ID_STR || (info.ams_id == VIRTUAL_AMS_DEPUTY_ID_STR && !info.ams_id.empty())) {
             return true;
         }
     }
diff --git a/src/slic3r/GUI/SelectMachine.hpp b/src/slic3r/GUI/SelectMachine.hpp
index 46d6adf4f4..6a3acce54c 100644
--- a/src/slic3r/GUI/SelectMachine.hpp
+++ b/src/slic3r/GUI/SelectMachine.hpp
@@ -662,7 +662,6 @@ private:
     ScalableButton* m_button_question { nullptr };
 
     wxStaticBitmap* m_bed_image{ nullptr };
-    Label*         m_text_bed_type;
 };
 
 
diff --git a/src/slic3r/GUI/SelectMachinePop.hpp b/src/slic3r/GUI/SelectMachinePop.hpp
index 764ffd6af5..e34a23708c 100644
--- a/src/slic3r/GUI/SelectMachinePop.hpp
+++ b/src/slic3r/GUI/SelectMachinePop.hpp
@@ -181,13 +181,13 @@ private:
     PinCodePanel*                     m_panel_direct_connection{nullptr};
     wxWindow*                         m_placeholder_panel{nullptr};
     HyperLink*                        m_hyperlink{nullptr}; // ORCA
-    wxBoxSizer *                      m_sizer_body{nullptr};
     wxBoxSizer *                      m_sizer_my_devices{nullptr};
     wxBoxSizer *                      m_sizer_other_devices{nullptr};
+#if defined(__WINDOWS__)
     wxBoxSizer *                      m_sizer_search_bar{nullptr};
+#endif
     wxSearchCtrl*                     m_search_bar{nullptr};
     wxScrolledWindow *                m_scrolledWindow{nullptr};
-    wxWindow *                        m_panel_body{nullptr};
     wxTimer *                         m_refresh_timer{nullptr};
     std::vector<MachinePanel*>        m_user_list_machine_panel;
     std::vector<MachinePanel*>        m_other_list_machine_panel;
diff --git a/src/slic3r/GUI/Selection.cpp b/src/slic3r/GUI/Selection.cpp
index b6d7abde21..84f4a0b836 100644
--- a/src/slic3r/GUI/Selection.cpp
+++ b/src/slic3r/GUI/Selection.cpp
@@ -1273,10 +1273,9 @@ void Selection::translate(const Vec3d &displacement, TransformationType transfor
                 const Polygons bed_polys{wxGetApp().plater()->get_partplate_list().get_plate(plate_idx)->get_shared_printable_polygon()};
                 Vec3d         tower_origin        = m_cache.volumes_data[i].get_volume_position();
                 Vec3d         actual_displacement = displacement;
-                bool show_read_wipe_tower = wxGetApp().plater()->get_partplate_list().get_plate(plate_idx)->fff_print()->is_step_done(psWipeTower);
-                float brim_width = wxGetApp().preset_bundle->prints.get_edited_preset().config.opt_float("prime_tower_brim_width");
-
-                const double margin = show_read_wipe_tower ? WIPE_TOWER_MARGIN : brim_width + 0.5; // 0.5 is the line width of wipe tower
+                // Both preview volumes carry the brim in their bounding box, and the release
+                // clamp holds it WIPE_TOWER_MARGIN inside — same margin, so drops don't snap.
+                const double margin = WIPE_TOWER_MARGIN;
 
                 actual_displacement = (m_cache.volumes_data[i].get_instance_rotation_matrix() * m_cache.volumes_data[i].get_instance_scale_matrix() *
                                         m_cache.volumes_data[i].get_instance_mirror_matrix())
diff --git a/src/slic3r/GUI/SendMultiMachinePage.cpp b/src/slic3r/GUI/SendMultiMachinePage.cpp
index 3a52caec3f..cafbb360e6 100644
--- a/src/slic3r/GUI/SendMultiMachinePage.cpp
+++ b/src/slic3r/GUI/SendMultiMachinePage.cpp
@@ -3,6 +3,7 @@
 #include "I18N.hpp"
 
 #include "GUI_App.hpp"
+#include "slic3r/Utils/bambu_networking.hpp"
 #include "MainFrame.hpp"
 #include "Widgets/RadioBox.hpp"
 #include <wx/listimpl.cpp>
@@ -814,13 +815,13 @@ wxBoxSizer* SendMultiMachinePage::create_item_title(wxString title, wxWindow* pa
     wxBoxSizer* m_sizer_title = new wxBoxSizer(wxHORIZONTAL);
 
     auto m_title = new wxStaticText(parent, wxID_ANY, title, wxDefaultPosition, wxDefaultSize, 0);
-    m_title->SetForegroundColour(DESIGN_GRAY800_COLOR);
+    m_title->SetForegroundColour(SEND_DESIGN_GRAY800_COLOR);
     m_title->SetFont(::Label::Head_13);
     m_title->Wrap(-1);
     m_title->SetToolTip(tooltip);
 
     auto m_line = new wxPanel(parent, wxID_ANY, wxDefaultPosition, wxSize(-1, 1), wxTAB_TRAVERSAL);
-    m_line->SetBackgroundColour(DESIGN_GRAY400_COLOR);
+    m_line->SetBackgroundColour(SEND_DESIGN_GRAY400_COLOR);
 
     m_sizer_title->Add(m_title, 0, wxALIGN_CENTER | wxALL, 3);
     m_sizer_title->Add(0, 0, 0, wxLEFT, 9);
@@ -843,7 +844,7 @@ wxBoxSizer* SendMultiMachinePage::create_item_checkbox(wxString title, wxWindow*
     m_sizer_checkbox->Add(0, 0, 0, wxEXPAND | wxLEFT, 8);
 
     auto checkbox_title = new wxStaticText(parent, wxID_ANY, title, wxDefaultPosition, wxDefaultSize, 0);
-    checkbox_title->SetForegroundColour(DESIGN_GRAY900_COLOR);
+    checkbox_title->SetForegroundColour(SEND_DESIGN_GRAY900_COLOR);
     checkbox_title->SetFont(::Label::Body_13);
 
     auto size = checkbox_title->GetTextExtent(title);
@@ -867,12 +868,12 @@ wxBoxSizer* SendMultiMachinePage::create_item_input(wxString str_before, wxStrin
 {
     wxBoxSizer* sizer_input = new wxBoxSizer(wxHORIZONTAL);
     auto input_title = new wxStaticText(parent, wxID_ANY, str_before);
-    input_title->SetForegroundColour(DESIGN_GRAY900_COLOR);
+    input_title->SetForegroundColour(SEND_DESIGN_GRAY900_COLOR);
     input_title->SetFont(::Label::Body_13);
     input_title->SetToolTip(tooltip);
     input_title->Wrap(-1);
 
-    auto input = new ::TextInput(parent, wxEmptyString, wxEmptyString, wxEmptyString, wxDefaultPosition, DESIGN_INPUT_SIZE, wxTE_PROCESS_ENTER);
+    auto input = new ::TextInput(parent, wxEmptyString, wxEmptyString, wxEmptyString, wxDefaultPosition, SEND_DESIGN_INPUT_SIZE, wxTE_PROCESS_ENTER);
     StateColor input_bg(std::pair<wxColour, int>(wxColour("#F0F0F1"), StateColor::Disabled), std::pair<wxColour, int>(*wxWHITE, StateColor::Enabled));
     input->SetBackgroundColor(input_bg);
     input->GetTextCtrl()->SetValue(app_config->get(param));
@@ -880,7 +881,7 @@ wxBoxSizer* SendMultiMachinePage::create_item_input(wxString str_before, wxStrin
     input->GetTextCtrl()->SetValidator(validator);
 
     auto second_title = new wxStaticText(parent, wxID_ANY, str_after, wxDefaultPosition, wxDefaultSize, wxST_ELLIPSIZE_END);
-    second_title->SetForegroundColour(DESIGN_GRAY900_COLOR);
+    second_title->SetForegroundColour(SEND_DESIGN_GRAY900_COLOR);
     second_title->SetFont(::Label::Body_13);
     second_title->SetToolTip(tooltip);
     second_title->Wrap(-1);
@@ -1337,7 +1338,7 @@ wxPanel* SendMultiMachinePage::create_page()
     m_tip_text->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), -1));
     m_tip_text->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), -1));
     m_tip_text->SetLabel(_L("Please select the devices you would like to manage here (up to 6 devices)"));
-    m_tip_text->SetForegroundColour(DESIGN_GRAY800_COLOR);
+    m_tip_text->SetForegroundColour(SEND_DESIGN_GRAY800_COLOR);
     m_tip_text->SetFont(::Label::Head_20);
     m_tip_text->Wrap(-1);
 
diff --git a/src/slic3r/GUI/SendMultiMachinePage.hpp b/src/slic3r/GUI/SendMultiMachinePage.hpp
index 7d77849bf3..eadd78eb0a 100644
--- a/src/slic3r/GUI/SendMultiMachinePage.hpp
+++ b/src/slic3r/GUI/SendMultiMachinePage.hpp
@@ -15,6 +15,9 @@
 #include "SelectMachine.hpp"
 
 namespace Slic3r {
+
+struct PrintParams;
+
 namespace GUI {
 #define SEND_LEFT_PADDING_LEFT 15
 #define SEND_LEFT_PRINTABLE    40
@@ -22,15 +25,15 @@ namespace GUI {
 #define SEND_LEFT_DEV_STATUS 250
 #define SEND_LEFT_TAKS_STATUS 180
 
-#define  DESIGN_SELECTOR_NOMORE_COLOR wxColour(248, 248, 248)
-#define  DESIGN_GRAY900_COLOR wxColour(38, 46, 48)
-#define  DESIGN_GRAY800_COLOR wxColour(50, 58, 61)
-#define  DESIGN_GRAY600_COLOR wxColour(144, 144, 144)
-#define  DESIGN_GRAY400_COLOR wxColour(166, 169, 170)
-#define  DESIGN_RESOUTION_PREFERENCES wxSize(FromDIP(540), -1)
-#define  DESIGN_COMBOBOX_SIZE wxSize(FromDIP(140), -1)
-#define  DESIGN_LARGE_COMBOBOX_SIZE wxSize(FromDIP(160), -1)
-#define  DESIGN_INPUT_SIZE wxSize(FromDIP(50), -1)
+#define  SEND_DESIGN_SELECTOR_NOMORE_COLOR wxColour(248, 248, 248)
+#define  SEND_DESIGN_GRAY900_COLOR wxColour(38, 46, 48)
+#define  SEND_DESIGN_GRAY800_COLOR wxColour(50, 58, 61)
+#define  SEND_DESIGN_GRAY600_COLOR wxColour(144, 144, 144)
+#define  SEND_DESIGN_GRAY400_COLOR wxColour(166, 169, 170)
+#define  SEND_DESIGN_RESOUTION_PREFERENCES wxSize(FromDIP(540), -1)
+#define  SEND_DESIGN_COMBOBOX_SIZE wxSize(FromDIP(140), -1)
+#define  SEND_DESIGN_LARGE_COMBOBOX_SIZE wxSize(FromDIP(160), -1)
+#define  SEND_DESIGN_INPUT_SIZE wxSize(FromDIP(50), -1)
 
 
 
diff --git a/src/slic3r/GUI/SendToPrinter.hpp b/src/slic3r/GUI/SendToPrinter.hpp
index 93215c4e06..24e483ae33 100644
--- a/src/slic3r/GUI/SendToPrinter.hpp
+++ b/src/slic3r/GUI/SendToPrinter.hpp
@@ -55,7 +55,6 @@ private:
     void init_timer();
 
     int                                 m_print_plate_idx;
-    int                                 m_current_filament_id;
     int                                 m_print_error_code = 0;
     int                                 timeout_count = 0;
     int                                 m_connect_try_times = 0;
@@ -77,7 +76,6 @@ private:
     TextInput*                          m_rename_input{ nullptr };
     wxSimplebook*                       m_rename_switch_panel{ nullptr };
     Plater*                             m_plater{ nullptr };
-    wxStaticBitmap*                     m_staticbitmap{ nullptr };
     ThumbnailPanel*                     m_thumbnailPanel{ nullptr };
     ComboBox*                           m_comboBox_printer{ nullptr };
     Button*                             m_rename_button{ nullptr };
@@ -97,8 +95,6 @@ private:
     wxPanel *                           m_connecting_panel{nullptr};
     wxSimplebook*                       m_simplebook{ nullptr };
     wxStaticText*                       m_statictext_finish{ nullptr };
-    wxStaticText*                       m_stext_sending{ nullptr };
-    wxStaticText*                       m_staticText_bed_title{ nullptr };
     wxStaticText*                       m_statictext_printer_msg{ nullptr };
     wxStaticText *                      m_connecting_printer_msg{nullptr};
     wxStaticText*                       m_stext_printer_title{ nullptr };
@@ -115,7 +111,6 @@ private:
     wxBoxSizer*                         sizer_thumbnail;
     wxBoxSizer*                         m_sizer_scrollable_region;
     wxBoxSizer*                         m_sizer_main;
-    wxStaticText*                       m_file_name;
     PrintDialogStatus                   m_print_status{ PrintStatusInit };
     AnimaIcon *                         m_animaicon{nullptr};
 
@@ -134,8 +129,6 @@ private:
     std::vector<RadioBox *>             m_storage_radioBox;
     std::string                         m_selected_storage;
     bool                                m_if_has_sdcard;
-    bool                                m_waiting_support{ false };
-    bool                                m_waiting_enable{ false };
     std::vector<std::string>            m_ability_list;
 
 public:
diff --git a/src/slic3r/GUI/SliceInfoPanel.hpp b/src/slic3r/GUI/SliceInfoPanel.hpp
index 8f1710022b..09708d68e4 100644
--- a/src/slic3r/GUI/SliceInfoPanel.hpp
+++ b/src/slic3r/GUI/SliceInfoPanel.hpp
@@ -28,7 +28,6 @@ public:
 
 private:
     wxScrolledWindow *m_panel;
-    BBLSliceInfo *m_info { nullptr };
 
     void OnMouse(wxMouseEvent &event);
     void OnSize(wxSizeEvent &event);
diff --git a/src/slic3r/GUI/SyncAmsInfoDialog.cpp b/src/slic3r/GUI/SyncAmsInfoDialog.cpp
index 7ae48008c8..7f075dbbfa 100644
--- a/src/slic3r/GUI/SyncAmsInfoDialog.cpp
+++ b/src/slic3r/GUI/SyncAmsInfoDialog.cpp
@@ -631,7 +631,6 @@ void SyncAmsInfoDialog::updata_ui_when_priner_not_same() {
 SyncAmsInfoDialog::SyncAmsInfoDialog(wxWindow *parent, SyncInfo &info) :
     DPIDialog(static_cast<wxWindow *>(wxGetApp().mainframe), wxID_ANY, _L("Synchronize AMS Filament Information"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
     , m_input_info(info)
-    , m_export_3mf_cancel(false)
     , m_mapping_popup(AmsMapingPopup(this,true))
     , m_mapping_tip_popup(AmsMapingTipPopup(this))
     , m_mapping_tutorial_popup(AmsTutorialPopup(this))
@@ -679,7 +678,7 @@ SyncAmsInfoDialog::SyncAmsInfoDialog(wxWindow *parent, SyncInfo &info) :
 
         wxBoxSizer *loading_Sizer = new wxBoxSizer(wxHORIZONTAL);
         m_gif_ctrl = new wxAnimationCtrl(m_loading_page, wxID_ANY, wxNullAnimation, wxDefaultPosition, wxDefaultSize, wxAC_DEFAULT_STYLE);
-        auto gif_path = Slic3r::var("loading.gif").c_str();
+        const wxString gif_path = from_u8(Slic3r::var("loading.gif"));
         if (m_gif_ctrl->LoadFile(gif_path)){
             m_gif_ctrl->SetSize(m_gif_ctrl->GetAnimation().GetSize());
             m_gif_ctrl->Play();
@@ -1548,7 +1547,7 @@ bool SyncAmsInfoDialog::is_nozzle_type_match(DevExtderSystem data, wxString &err
                     auto sai_nz_pt = wxGetApp().preset_bundle->printers.get_edited_preset().get_printer_type(wxGetApp().preset_bundle);
                     if (target_machine_nozzle_id == DEPUTY_EXTRUDER_ID) {
                         pos = _L(DevPrinterConfigUtil::get_toolhead_display_name(sai_nz_pt, DEPUTY_EXTRUDER_ID, ToolHeadComponent::Nozzle, ToolHeadNameCase::LowerCase));
-                    } else if ((target_machine_nozzle_id == MAIN_EXTRUDER_ID)) {
+                    } else if (target_machine_nozzle_id == MAIN_EXTRUDER_ID) {
                         pos = _L(DevPrinterConfigUtil::get_toolhead_display_name(sai_nz_pt, MAIN_EXTRUDER_ID, ToolHeadComponent::Nozzle, ToolHeadNameCase::LowerCase));
                     }
 
diff --git a/src/slic3r/GUI/SyncAmsInfoDialog.hpp b/src/slic3r/GUI/SyncAmsInfoDialog.hpp
index b0868f8c58..6f86af6032 100644
--- a/src/slic3r/GUI/SyncAmsInfoDialog.hpp
+++ b/src/slic3r/GUI/SyncAmsInfoDialog.hpp
@@ -21,15 +21,11 @@ class SyncAmsInfoDialog : public DPIDialog
     bool              m_only_exist_ext_spool_flag{false};
     int               m_current_filament_id{0};
     int               m_print_plate_idx{0};
-    int               m_print_plate_total{0};
     int               m_timeout_count{0};
     int               m_print_error_code{0};
     bool              m_is_in_sending_mode{false};
     bool              m_ams_mapping_res{false};
     bool              m_ams_mapping_valid{false};
-    bool              m_export_3mf_cancel{false};
-    bool              m_is_canceled{false};
-    bool              m_is_rename_mode{false};
     bool              m_check_flag{false};
     PrintPageMode     m_print_page_mode{PrintPageMode::PrintPageModePrepare};
     std::string       m_print_error_msg;
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index e650c45126..08ec94393d 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -7,6 +7,7 @@
 #include "libslic3r/FilamentMixer.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/Model.hpp"
+#include "libslic3r/PublishSettings.hpp"
 #include "libslic3r/GCode/GCodeProcessor.hpp"
 
 #include "Search.hpp"
@@ -1991,6 +1992,20 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
 
     // reload scene to update timelapse wipe tower
     if (opt_key == "timelapse_type") {
+        // Smooth timelapse parks the nozzle on the prime tower every layer, so it needs a tower on
+        // every layer. That is exactly what "No sparse layers" removes, and with both on the tower is
+        // planned full height and then dropped on emission. Drop "No sparse layers" and tell the user.
+        if (boost::any_cast<int>(value) == (int) TimelapseType::tlSmooth && m_config->opt_bool("wipe_tower_no_sparse_layers")) {
+            MessageDialog dlg(wxGetApp().plater(),
+                              _L("Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". "
+                                 "\"No sparse layers\" has been turned off."),
+                              _L("Warning"), wxICON_WARNING | wxOK);
+            dlg.ShowModal();
+            DynamicPrintConfig new_conf = *m_config;
+            new_conf.set_key_value("wipe_tower_no_sparse_layers", new ConfigOptionBool(false));
+            m_config_manipulation.apply(m_config, &new_conf);
+        }
+
         bool wipe_tower_enabled = m_config->option<ConfigOptionBool>("enable_prime_tower")->value;
         if (!wipe_tower_enabled && boost::any_cast<int>(value) == (int)TimelapseType::tlSmooth) {
             MessageDialog dlg(wxGetApp().plater(), _L("A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower\?"),
@@ -2006,6 +2021,23 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         }
     }
 
+    // Mirror of the timelapse_type branch above: enabling "No sparse layers" while smooth timelapse
+    // is active would leave the tower on every layer anyway, so fall back to traditional timelapse.
+    if (opt_key == "wipe_tower_no_sparse_layers" && boost::any_cast<bool>(value)) {
+        auto timelapse_type = m_config->option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
+        if (timelapse_type && timelapse_type->value == TimelapseType::tlSmooth) {
+            MessageDialog dlg(wxGetApp().plater(),
+                              _L("\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. "
+                                 "Timelapse has been switched to traditional mode."),
+                              _L("Warning"), wxICON_WARNING | wxOK);
+            dlg.ShowModal();
+            DynamicPrintConfig new_conf = *m_config;
+            new_conf.set_key_value("timelapse_type", new ConfigOptionEnum<TimelapseType>(TimelapseType::tlTraditional));
+            m_config_manipulation.apply(m_config, &new_conf);
+            wxGetApp().plater()->update();
+        }
+    }
+
     if (opt_key == "print_sequence" && m_config->opt_enum<PrintSequence>("print_sequence") == PrintSequence::ByObject) {
         auto printer_structure_opt = m_preset_bundle->printers.get_edited_preset().config.option<ConfigOptionEnum<PrinterStructure>>("printer_structure");
         if (printer_structure_opt && printer_structure_opt->value == PrinterStructure::psI3) {
@@ -2668,6 +2700,8 @@ void TabPrint::build()
         optgroup->append_single_option_line("role_based_wipe_speed","quality_settings_seam#role-based-wipe-speed");
         optgroup->append_single_option_line("wipe_speed", "quality_settings_seam#wipe-speed");
         optgroup->append_single_option_line("wipe_on_loops","quality_settings_seam#wipe-on-loop-inward-movement");
+        optgroup->append_single_option_line("wipe_inward", "quality_settings_seam#wipe-inward");
+        optgroup->append_single_option_line("wipe_inward_distance", "quality_settings_seam#wipe-inward");
         optgroup->append_single_option_line("wipe_before_external_loop","quality_settings_seam#wipe-before-external");
 
 
@@ -2760,6 +2794,7 @@ void TabPrint::build()
 
         optgroup = page->new_optgroup(L("Overhangs"), L"param_overhang");
         optgroup->append_single_option_line("detect_overhang_wall", "quality_settings_overhangs#detect-overhang-wall");
+        optgroup->append_single_option_line("unsupported_wall_last", "quality_settings_overhangs#unsupported-wall-last");
         optgroup->append_single_option_line("make_overhang_printable", "quality_settings_overhangs#make-overhang-printable");
         optgroup->append_single_option_line("make_overhang_printable_angle", "quality_settings_overhangs#maximum-angle");
         optgroup->append_single_option_line("make_overhang_printable_hole_size", "quality_settings_overhangs#hole-area");
@@ -3023,6 +3058,8 @@ void TabPrint::build()
         optgroup = page->new_optgroup(L("Advanced"), L"advanced");
         optgroup->append_single_option_line("interlocking_beam", "multimaterial_settings_advanced#interlocking-beam");
         optgroup->append_single_option_line("toolchange_ordering", "multimaterial_settings_advanced#toolchange-ordering");
+        optgroup->append_single_option_line("toolchange_cyclic_order", "multimaterial_settings_advanced#toolchange-order");
+        optgroup->append_single_option_line("toolchange_cyclic_first_layer", "multimaterial_settings_advanced#toolchange-order");
         optgroup->append_single_option_line("interface_shells", "multimaterial_settings_advanced#interface-shells");
         optgroup->append_single_option_line("mmu_segmented_region_max_width", "multimaterial_settings_advanced#maximum-width-of-segmented-region");
         optgroup->append_single_option_line("mmu_segmented_region_interlocking_depth", "multimaterial_settings_advanced#interlocking-depth-of-segmented-region");
@@ -5028,28 +5065,12 @@ void TabPrinter::build_fff()
             auto registered_printer_agents = NetworkAgentFactory::get_registered_printer_agents();
             if (!registered_printer_agents.empty())
             {
-                ConfigOptionDef def;
-                def.type = coString;
-                def.gui_type = ConfigOptionDef::GUIType::printer_agent_select;
-                def.width = 3 * Field::def_width_wider() / 2;
-                def.label = L("Printer Agent");
-                def.tooltip = L("Select the network agent implementation for printer communication. "
+                option = optgroup->get_option("printer_agent");
+                option.opt.gui_type = ConfigOptionDef::GUIType::printer_agent_select;
+                option.opt.width = 3 * Field::def_width_wider() / 2;
+                option.opt.tooltip = L("Select the network agent implementation for printer communication. "
                     "Available agents are registered at startup.");
-                def.mode = comAdvanced;
-
-                // Create the field without get_option() so it is not registered in m_opt_map.
-                // ConfigOptionsGroup handles printer_agent before the generic mapped write path.
-                Line agent_line = optgroup->create_single_option_line(Option(def, "printer_agent"));
-                optgroup->append_line(agent_line);
-                if (Field* agent_field = get_field("printer_agent"))
-                {
-                    if (auto* choice = dynamic_cast<PrinterAgentChoice*>(agent_field); choice && choice->getWindow())
-                        choice->set_value(m_config->opt_string("printer_agent"), false);
-                }
-
-                // Register by hand so the UnsavedChanges dialog can render a row for it.
-                wxGetApp().sidebar().get_searcher().add_key("printer_agent", m_type, optgroup->title,
-                                                            optgroup->config_category());
+                optgroup->append_single_option_line(option);
             }
         }
 
@@ -5120,6 +5141,7 @@ void TabPrinter::build_fff()
 
         optgroup = page->new_optgroup(L("Extruder Clearance"), "param_extruder_clearance");
         optgroup->append_single_option_line("extruder_clearance_radius", "printer_basic_information_extruder_clearance#radius");
+        optgroup->append_single_option_line("extruder_clearance_dist_to_rod", "printer_basic_information_extruder_clearance#distance-to-rod");
         optgroup->append_single_option_line("extruder_clearance_height_to_rod", "printer_basic_information_extruder_clearance#height-to-rod");
         optgroup->append_single_option_line("extruder_clearance_height_to_lid", "printer_basic_information_extruder_clearance#height-to-lid");
 
@@ -5699,26 +5721,16 @@ if (is_marlin_flavor)
             optgroup->append_single_option_line("extruder_offset", "printer_extruder_basic_information#extruder-offset-position", extruder_idx);
 
             //BBS: don't show retract related config menu in machine page
+            // These optgroups are built from publishable_printer_retraction/z_hop_options() so the
+            // published-3MF printer allowlist (their union in libslic3r/PublishSettings.hpp) can
+            // never drift from what the machine page actually shows.
             optgroup = page->new_optgroup(L("Retraction"), L"param_retraction");
-            optgroup->append_single_option_line("retraction_length", "printer_extruder_retraction#length", extruder_idx);
-            optgroup->append_single_option_line("retract_restart_extra", "printer_extruder_retraction#extra-length-on-restart", extruder_idx);
-            optgroup->append_single_option_line("retraction_speed", "printer_extruder_retraction#retraction-speed", extruder_idx);
-            optgroup->append_single_option_line("deretraction_speed", "printer_extruder_retraction#deretraction-speed", extruder_idx);
-            optgroup->append_single_option_line("retraction_minimum_travel", "printer_extruder_retraction#travel-distance-threshold", extruder_idx);
-            optgroup->append_single_option_line("retract_when_changing_layer", "printer_extruder_retraction#retract-on-layer-change", extruder_idx);
-            optgroup->append_single_option_line("wipe", "printer_extruder_retraction#wipe-while-retracting", extruder_idx);
-            optgroup->append_single_option_line("wipe_distance", "printer_extruder_retraction#wipe-distance", extruder_idx);
-            optgroup->append_single_option_line("retract_before_wipe", "printer_extruder_retraction#retract-amount-before-wipe", extruder_idx);
-            // Orca
-            optgroup->append_single_option_line("retract_after_wipe", "printer_extruder_retraction#retract-amount-after-wipe", extruder_idx);
+            for (const PublishablePrinterOption& opt : publishable_printer_retraction_options())
+                optgroup->append_single_option_line(opt.key, opt.icon, extruder_idx);
 
             optgroup = page->new_optgroup(L("Z-Hop"), L"param_extruder_lift_enforcement");
-            optgroup->append_single_option_line("retract_lift_enforce", "printer_extruder_z_hop#on-surfaces", extruder_idx);
-            optgroup->append_single_option_line("z_hop_types", "printer_extruder_z_hop#z-hop-type", extruder_idx);
-            optgroup->append_single_option_line("z_hop", "printer_extruder_z_hop#z-hop-height", extruder_idx);
-            optgroup->append_single_option_line("travel_slope", "printer_extruder_z_hop#traveling-angle", extruder_idx);
-            optgroup->append_single_option_line("retract_lift_above", "printer_extruder_z_hop#only-lift-z-above", extruder_idx);
-            optgroup->append_single_option_line("retract_lift_below", "printer_extruder_z_hop#only-lift-z-below", extruder_idx);
+            for (const PublishablePrinterOption& opt : publishable_printer_z_hop_options())
+                optgroup->append_single_option_line(opt.key, opt.icon, extruder_idx);
 
             optgroup = page->new_optgroup(L("Retraction when switching material"), L"param_retraction_material_change");
             optgroup->append_single_option_line("retract_length_toolchange", "printer_extruder_retraction#retraction-when-switching-materials", extruder_idx);
@@ -5921,15 +5933,6 @@ void TabPrinter::reload_config()
     if (m_active_page && m_active_page->title() == "Multimaterial")
         m_active_page->set_value("extruders_count", int(m_extruders_count));
 
-    // m_opt_map-driven reload does not cover printer_agent, so sync this custom field explicitly.
-    if (Field* agent_field = get_field("printer_agent"))
-    {
-        if (auto* choice = dynamic_cast<PrinterAgentChoice*>(agent_field); choice && choice->getWindow())
-        {
-            const std::string selected_agent = m_config->opt_string("printer_agent");
-            choice->set_value(selected_agent, false);
-        }
-    }
 }
 
 void TabPrinter::activate_selected_page(std::function<void()> throw_if_canceled)
@@ -5941,15 +5944,6 @@ void TabPrinter::activate_selected_page(std::function<void()> throw_if_canceled)
     if (m_active_page && m_active_page->title() == "Multimaterial")
         m_active_page->set_value("extruders_count", int(m_extruders_count));
 
-    // m_opt_map-driven reload does not cover printer_agent, so sync this custom field explicitly.
-    if (Field* agent_field = get_field("printer_agent"))
-    {
-        if (auto* choice = dynamic_cast<PrinterAgentChoice*>(agent_field); choice && choice->getWindow())
-        {
-            const std::string selected_agent = m_config->opt_string("printer_agent");
-            choice->set_value(selected_agent, false);
-        }
-    }
 }
 
 void TabPrinter::clear_pages()
diff --git a/src/slic3r/GUI/Tab.hpp b/src/slic3r/GUI/Tab.hpp
index 5069b76417..30a06b4eb5 100644
--- a/src/slic3r/GUI/Tab.hpp
+++ b/src/slic3r/GUI/Tab.hpp
@@ -30,7 +30,6 @@
 #include <memory>
 
 //#include "BedShapeDialog.hpp"
-#include "Event.hpp"
 #include "wxExtensions.hpp"
 #include "ConfigManipulation.hpp"
 #include "OptionsGroup.hpp"
@@ -38,7 +37,6 @@
 //BBS: GUI refactor
 #include "Notebook.hpp"
 #include "ParamsPanel.hpp"
-#include "Widgets/RoundedRectangle.hpp"
 #include "Widgets/TextInput.hpp"
 #include "Widgets/CheckBox.hpp" // ORCA
 
@@ -472,6 +470,7 @@ protected:
     std::string m_last_sparse_infill_rotate_template_value;
     ConfigManipulation get_config_manipulation();
     friend class EditGCodeDialog;
+    friend class PublishSettingsDialog;
 };
 
 class TabPrint : public Tab
@@ -630,7 +629,6 @@ private:
     std::vector<PageShp>			m_pages_fff;
     std::vector<PageShp>			m_pages_sla;
 
-    wxBoxSizer*         m_presets_sizer                 {nullptr};
 public:
 	ScalableButton*	m_reset_to_filament_color = nullptr;
 
diff --git a/src/slic3r/GUI/TextureImportDialog.cpp b/src/slic3r/GUI/TextureImportDialog.cpp
index 1a24799a15..2e5c1145e1 100644
--- a/src/slic3r/GUI/TextureImportDialog.cpp
+++ b/src/slic3r/GUI/TextureImportDialog.cpp
@@ -134,7 +134,9 @@ public:
     }
 
 private:
+#if defined(__WXMSW__) || defined(__APPLE__)
     int m_suspended_count = 0;
+#endif
 };
 
 static bool needs_filament_swatch_border(const wxColour& colour)
@@ -519,7 +521,6 @@ public:
         , m_entries(entries)
         , m_colors_rgba(colors_rgba)
         , m_names(names)
-        , m_existing_count(existing_count)
         , m_dialog_anchor(dialog_anchor)
         , m_on_select(std::move(on_select))
         , m_on_add_filament(std::move(on_add_filament))
@@ -877,7 +878,6 @@ private:
     std::vector<TextureFilamentEntry>          m_entries;
     std::vector<std::array<float, 4>>          m_colors_rgba;
     std::vector<std::string>                   m_names;
-    size_t                                     m_existing_count = 0;
     wxWindow*                                  m_dialog_anchor = nullptr;
     std::function<void(int)>                   m_on_select;
     std::function<void(wxColour)>              m_on_add_filament;
diff --git a/src/slic3r/GUI/TroubleshootDialog.cpp b/src/slic3r/GUI/TroubleshootDialog.cpp
index 5acb75c6ea..7cbb00b5d8 100644
--- a/src/slic3r/GUI/TroubleshootDialog.cpp
+++ b/src/slic3r/GUI/TroubleshootDialog.cpp
@@ -6,6 +6,8 @@
 #include "GUI_App.hpp"
 #include "MainFrame.hpp"
 
+#include <wx/filename.h>
+#include <wx/stdpaths.h>
 #include <wx/display.h>
 #include <wx/wfstream.h>
 #include "wx/clipbrd.h"
diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp
index 5c69466cfa..39e611b341 100644
--- a/src/slic3r/GUI/UnsavedChangesDialog.cpp
+++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp
@@ -12,6 +12,7 @@
 #include "libslic3r/PresetBundle.hpp"
 #include "libslic3r/Color.hpp"
 #include "format.hpp"
+#include "ConfigValueFormatter.hpp"
 #include "GUI_App.hpp"
 #include "Plater.hpp"
 #include "Tab.hpp"
@@ -22,7 +23,6 @@
 #include "MsgDialog.hpp"
 
 #include "PresetComboBoxes.hpp"
-#include "Widgets/RoundedRectangle.hpp"
 #include "Widgets/CheckBox.hpp"
 #include "Widgets/DialogButtons.hpp"
 #include "Widgets/HyperLink.hpp"
@@ -571,14 +571,6 @@ void DiffModel::Clear()
 }
 
 
-static std::string get_pure_opt_key(std::string opt_key)
-{
-    const int pos = opt_key.find("#");
-    if (pos > 0)
-        boost::erase_tail(opt_key, opt_key.size() - pos);
-    return opt_key;
-}
-
 // ----------------------------------------------------------------------------
 //                  DiffViewCtrl
 // ----------------------------------------------------------------------------
@@ -1212,32 +1204,6 @@ bool UnsavedChangesDialog::save(PresetCollection* dependent_presets, bool show_s
     return true;
 }
 
-wxString get_string_from_enum(const std::string& opt_key, const DynamicPrintConfig& config, bool is_infill = false, int idx = -1)
-{
-    const ConfigOptionDef& def = config.def()->options.at(opt_key);
-    const std::vector<std::string>& names = def.enum_labels;//ConfigOptionEnum<T>::get_enum_names();
-    int val = 0;
-
-    if (idx >= 0)
-        val = dynamic_cast<const ConfigOptionInts*>(config.option(opt_key))->get_at(idx);
-    else
-        val = config.option(opt_key)->getInt();
-
-    // Each infill doesn't use all list of infill declared in PrintConfig.hpp.
-    // So we should "convert" val to the correct one
-    if (is_infill) {
-        for (auto key_val : *def.enum_keys_map)
-            if (int(key_val.second) == val) {
-                auto it = std::find(def.enum_values.begin(), def.enum_values.end(), key_val.first);
-                if (it == def.enum_values.end())
-                    return "";
-                return from_u8(_utf8(names[it - def.enum_values.begin()]));
-            }
-        return _L("Undefined");
-    }
-    return from_u8(_utf8(names[val]));
-}
-
 // BBS
 #if 0
 static size_t get_id_from_opt_key(std::string opt_key)
@@ -1251,194 +1217,6 @@ static size_t get_id_from_opt_key(std::string opt_key)
 }
 #endif
 
-static wxString get_full_label(std::string opt_key, const DynamicPrintConfig& config)
-{
-    opt_key = get_pure_opt_key(opt_key);
-    auto option = config.option(opt_key);
-
-    if (!option || option->is_nil())
-        return _L("N/A");
-
-    const ConfigOptionDef* opt = config.def()->get(opt_key);
-    return opt->full_label.empty() ? opt->label : opt->full_label;
-}
-
-static wxString get_string_value(std::string opt_key, const DynamicPrintConfig& config)
-{
-    int orig_opt_idx = -1;
-    int opt_idx = -1;
-    int pos = opt_key.find("#");
-    std::string temp_str = opt_key;
-    if (pos > 0) {
-        boost::erase_head(temp_str, pos + 1);
-        orig_opt_idx = static_cast<size_t>(atoi(temp_str.c_str()));
-    }
-    opt_idx = orig_opt_idx >= 0 ? orig_opt_idx : 0;
-    opt_key = get_pure_opt_key(opt_key);
-    auto option = config.option(opt_key);
-    if (!option) {
-        return _L("N/A");
-    }
-    auto opt_vector = dynamic_cast<const ConfigOptionVectorBase *>(option);
-
-    if (option->is_scalar() && config.option(opt_key)->is_nil() ||
-        option->is_vector() && opt_vector && opt_idx >= 0 && opt_idx < opt_vector->size() && opt_vector->is_nil(opt_idx))
-        return _L("N/A");
-
-    wxString out;
-
-    const ConfigOptionDef* opt = config.def()->get(opt_key);
-    bool is_nullable = opt->nullable;
-
-    switch (opt->type) {
-    case coInt:
-        return from_u8((boost::format("%1%") % config.opt_int(opt_key)).str());
-    case coInts: {
-        if (is_nullable) {
-            auto values = config.opt<ConfigOptionIntsNullable>(opt_key);
-            if (opt_idx < values->size())
-                return from_u8((boost::format("%1%") % values->get_at(opt_idx)).str());
-        }
-        else {
-            auto values = config.opt<ConfigOptionInts>(opt_key);
-            if (orig_opt_idx >= 0 && orig_opt_idx < values->size()) {
-                return from_u8((boost::format("%1%") % values->get_at(opt_idx)).str());
-            }
-            else {
-                std::string value_str;
-                for (int i = 0; i < values->size(); i++) {
-                    value_str += std::to_string(values->get_at(i));
-                    if (i != values->size() - 1) {
-                        value_str += ",";
-                    }
-                }
-                return from_u8(value_str);
-            }
-        }
-        return _L("Undefined");
-    }
-    case coBool:
-        return config.opt_bool(opt_key) ? "true" : "false";
-    case coBools: {
-        if (is_nullable) {
-            auto values = config.opt<ConfigOptionBoolsNullable>(opt_key);
-            if (opt_idx < values->size())
-                return values->get_at(opt_idx) ? "true" : "false";
-        }
-        else {
-            auto values = config.opt<ConfigOptionBools>(opt_key);
-            if (opt_idx < values->size())
-                return values->get_at(opt_idx) ? "true" : "false";
-        }
-        return _L("Undefined");
-    }
-    case coPercent:
-        return from_u8((boost::format("%1%%%") % int(config.optptr(opt_key)->getFloat())).str());
-    case coPercents: {
-        if (is_nullable) {
-            auto values = config.opt<ConfigOptionPercentsNullable>(opt_key);
-            if (opt_idx < values->size())
-                return from_u8((boost::format("%1%%%") % values->get_at(opt_idx)).str());
-        }
-        else {
-            auto values = config.opt<ConfigOptionPercents>(opt_key);
-            if (opt_idx < values->size())
-                return from_u8((boost::format("%1%%%") % values->get_at(opt_idx)).str());
-        }
-        return _L("Undefined");
-    }
-    case coFloat:
-        return double_to_string(config.opt_float(opt_key));
-    case coFloats: {
-        if (is_nullable) {
-            auto values = config.opt<ConfigOptionFloatsNullable>(opt_key);
-            if (opt_idx < values->size())
-                return double_to_string(values->get_at(opt_idx));
-        }
-        else {
-            auto values = config.opt<ConfigOptionFloats>(opt_key);
-            if (values && opt_idx < values->size())
-                return double_to_string(values->get_at(opt_idx));
-        }
-        return _L("Undefined");
-    }
-    case coString:
-        return from_u8(config.opt_string(opt_key));
-    case coStrings: {
-        const ConfigOptionStrings* strings = config.opt<ConfigOptionStrings>(opt_key);
-        if (strings) {
-            if (opt_key == "compatible_printers" || opt_key == "compatible_prints") {
-                if (strings->empty())
-                    return _L("All");
-                for (size_t id = 0; id < strings->size(); id++)
-                    out += from_u8(strings->get_at(id)) + "\n";
-                out.RemoveLast(1);
-                return out;
-            }
-            if (!strings->empty() && opt_idx < strings->values.size())
-                return from_u8(strings->get_at(opt_idx));
-        }
-        break;
-        }
-    case coFloatOrPercent: {
-        const ConfigOptionFloatOrPercent* opt = config.opt<ConfigOptionFloatOrPercent>(opt_key);
-        if (opt)
-            out = double_to_string(opt->value) + (opt->percent ? "%" : "");
-        return out;
-    }
-    case coEnum: {
-        return get_string_from_enum(opt_key, config,
-            opt_key == "top_surface_pattern" ||
-            opt_key == "bottom_surface_pattern" ||
-            opt_key == "internal_solid_infill_pattern" ||
-            opt_key == "sparse_infill_pattern" ||
-            opt_key == "ironing_pattern" ||
-            opt_key == "support_ironing_pattern" ||
-            opt_key == "support_pattern" ||
-            opt_key == "support_interface_pattern")
-            ;
-    }
-    case coEnums: {
-        return get_string_from_enum(opt_key, config,
-            opt_key == "top_surface_pattern" ||
-            opt_key == "bottom_surface_pattern" ||
-            opt_key == "internal_solid_infill_pattern" ||
-            opt_key == "sparse_infill_pattern" ||
-            opt_key == "ironing_pattern" ||
-            opt_key == "support_ironing_pattern" ||
-            opt_key == "support_pattern" ||
-            opt_key == "support_interface_pattern"
-            , opt_idx);
-    }
-    case coPoint: {
-        Vec2d val = config.opt<ConfigOptionPoint>(opt_key)->value;
-        return from_u8((boost::format("[%1%]") % ConfigOptionPoint(val).serialize()).str());
-    }
-    case coPoints: {
-        //BBS: add bed_exclude_area
-        if (opt_key == "printable_area" || opt_key == "thumbnails") {
-            ConfigOptionPoints points = *config.option<ConfigOptionPoints>(opt_key);
-            //BuildVolume build_volume = {points.values, 0.};
-            return get_thumbnails_string(points.values);
-        }
-        else if (opt_key == "bed_exclude_area") {
-            return get_thumbnails_string(config.option<ConfigOptionPoints>(opt_key)->values);
-        }
-        else if (opt_key == "head_wrap_detect_zone") {
-            return get_thumbnails_string(config.option<ConfigOptionPoints>(opt_key)->values);
-        }
-        else if (opt_key == "wrapping_exclude_area") {
-            return get_thumbnails_string(config.option<ConfigOptionPoints>(opt_key)->values);
-        }
-        Vec2d val = config.opt<ConfigOptionPoints>(opt_key)->get_at(opt_idx);
-        return from_u8((boost::format("[%1%]") % ConfigOptionPoint(val).serialize()).str());
-    }
-    default:
-        break;
-    }
-    return out;
-}
-
 void UnsavedChangesDialog::update(Preset::Type type, PresetCollection* dependent_presets, const std::string& new_selected_preset, const wxString& header)
 {
     PresetCollection* presets = dependent_presets;
@@ -1712,7 +1490,15 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, DynamicConfig * config
 
     for (const std::string &opt_key : config->keys()) {
         int                   variant_index = -2;
-        const Search::Option &option        = searcher.get_option(opt_key, type, variant_index);
+        Search::Option        option        = searcher.get_option(opt_key, type, variant_index);
+        if (variant_index == -2) {
+            // Orca: Every transferred setting must remain visible even when it is absent from the search index.
+            const ConfigOptionDef* def = print_config_def.get(opt_key);
+            const std::string label = def ? (def->full_label.empty() ? def->label : def->full_label) : std::string();
+            option.label_local = (label.empty() ? from_u8(opt_key) : _L(label)).ToStdWstring();
+            option.category_local = (def && !def->category.empty() ?
+                Tab::translate_category(from_u8(def->category), type) : _L("Others")).ToStdWstring();
+        }
         auto category = option.category_local;
         auto opt = dynamic_cast<ConfigOptionVectorBase*>(config->option(opt_key));
         std::string           value_from    = opt->vserialize()[from];
@@ -1740,6 +1526,8 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres
     else
         presets_list.emplace_back(presets_);
 
+    const bool multiple_extruders = wxGetApp().preset_bundle->get_printer_extruder_count() > 1;
+
     // Display a dialog showing the dirty options in a human readable form.
     for (PresetCollection* presets : presets_list)
     {
@@ -1775,29 +1563,41 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres
 
         auto variant_key      = Preset::get_iot_type_string(type) + "_extruder_variant";
         auto id_key           = Preset::get_iot_type_string(type) + "_extruder_id";
-        auto extruder_variant = dynamic_cast<ConfigOptionStrings const *>(old_config.option(variant_key));
-        auto extruder_id      = dynamic_cast<ConfigOptionInts const *>(old_config.option(id_key));
+        // Orca: Dirty indices belong to the edited config, which may contain newly added variants.
+        auto extruder_variant = dynamic_cast<ConfigOptionStrings const *>(new_config.option(variant_key));
+        auto extruder_id      = dynamic_cast<ConfigOptionInts const *>(new_config.option(id_key));
 
         for (const std::string& opt_key : dirty_options) {
             int variant_index = -2;
             const Search::Option &option = searcher.get_option(opt_key, type, variant_index);
-            if (option.opt_key() != opt_key && variant_index < -1) {
+            if (variant_index == -2) {
                 // When founded option isn't the correct one.
                 // It can be for dirty_options: "default_print_profile", "printer_model", "printer_settings_id",
                 // because of they don't exist in searcher
                 continue;
             }
-            auto category = option.category_local;
-            if (variant_index >= 0) {
-                if (printer_options_with_variant_2.count(opt_key.substr(0, opt_key.find_last_of('#'))) > 0)
-                    variant_index /= 2;
-                if (boost::nowide::narrow(category).find("Extruder ") == 0)
-                    category = category.substr(0, 8);
-                if (extruder_id)
-                    category = category + (wxString(" {") + (extruder_id->values[variant_index] == 1 ? _L("Left: ") : _L("Right: "))
-                            + L(extruder_variant->values[variant_index]) + "}");
-                else
-                    category = category + (wxString(" {") + L(extruder_variant->values[variant_index]) + "}");
+            wxString category = option.category_local;
+            wxString label = option.label_local;
+            if (type == Preset::TYPE_PRINTER && variant_index >= 0 &&
+                printer_options_with_variant_2.count(get_pure_opt_key(opt_key)) > 0) {
+                // Orca: silent_mode is obsolete on import, but its option and two-column UI still exist.
+                // Keep mode labels for configs that explicitly enable it; omit them in the default single-mode UI.
+                if (new_config.opt_bool("silent_mode"))
+                    label += " (" + (variant_index % 2 == 0 ? _L("Normal") : _L("Silent")) + ")";
+                variant_index /= 2;
+            }
+            if (variant_index >= 0 && extruder_variant && variant_index < extruder_variant->size()) {
+                // Orca: Match the untranslated category and use the same extruder names as the printer tabs.
+                if (option.category.compare(0, 9, L"Extruder ") == 0)
+                    category = _L("Extruder");
+                wxString variant_label = L(extruder_variant->values[variant_index]);
+                // Orca: An extruder name only disambiguates variants on printers with multiple extruders.
+                if (multiple_extruders && extruder_id && variant_index < extruder_id->size() && extruder_id->values[variant_index] > 0) {
+                    const wxString extruder_name = Tab::translate_category(
+                        wxString::Format("Extruder %d", extruder_id->values[variant_index]), Preset::TYPE_PRINTER);
+                    variant_label = extruder_name + " (" + variant_label + ")";
+                }
+                category = variant_label + ": " + category;
             }
 
             /*m_tree->Append(opt_key, type, option.category_local, option.group_local, option.label_local,
@@ -1806,7 +1606,7 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres
 
             //PresetItem pi = {opt_key, type, 1983};
             //m_presetitems.push_back()
-            PresetItem pi = {type, opt_key, category, option.group_local, option.label_local, get_string_value(opt_key, old_config), get_string_value(opt_key, new_config)};
+            PresetItem pi = {type, opt_key, category, option.group_local, label, get_string_value(opt_key, old_config), get_string_value(opt_key, new_config)};
             m_presetitems.push_back(pi);
 
         }
diff --git a/src/slic3r/GUI/UpdateDialogs.hpp b/src/slic3r/GUI/UpdateDialogs.hpp
index 04eb4ffb3c..784c10f09a 100644
--- a/src/slic3r/GUI/UpdateDialogs.hpp
+++ b/src/slic3r/GUI/UpdateDialogs.hpp
@@ -33,7 +33,6 @@ public:
 
 	void on_hyperlink(wxHyperlinkEvent& evt);
 private:
-	wxCheckBox *cbox;
 };
 
 
diff --git a/src/slic3r/GUI/UserManager.cpp b/src/slic3r/GUI/UserManager.cpp
index 456582e896..e874c2158d 100644
--- a/src/slic3r/GUI/UserManager.cpp
+++ b/src/slic3r/GUI/UserManager.cpp
@@ -1,9 +1,11 @@
 #include "libslic3r/libslic3r.h"
 #include "UserManager.hpp"
 #include "DeviceManager.hpp"
+#include "BindDialog.hpp"
 #include "NetworkAgent.hpp"
 #include "GUI.hpp"
 #include "GUI_App.hpp"
+#include "I18N.hpp"
 #include "MsgDialog.hpp"
 
 #include "DeviceCore/DevManager.h"
diff --git a/src/slic3r/GUI/WebGuideDialog.cpp b/src/slic3r/GUI/WebGuideDialog.cpp
index ae259f23d1..78030c68da 100644
--- a/src/slic3r/GUI/WebGuideDialog.cpp
+++ b/src/slic3r/GUI/WebGuideDialog.cpp
@@ -23,6 +23,7 @@
 #include <wx/textdlg.h>
 
 #include <wx/wx.h>
+#include <wx/weakref.h>
 #include <wx/display.h>
 #include <wx/fileconf.h>
 #include <wx/file.h>
@@ -562,6 +563,78 @@ void GuideFrame::OnScriptMessage(wxWebViewEvent &evt)
                 m_ProfileJson["filament"][fName]["selected"] = 1;
             }
         }
+        else if (strCmd == "check_for_new_printers") {
+            json response = json::object();
+            response["command"] = "check_new_printers_result";
+            // Guide pages currently send sequence_id as a number, while older
+            // pages may send it as a string. Preserve the value without
+            // forcing either representation.
+            if (j.contains("sequence_id"))
+                response["sequence_id"] = j["sequence_id"];
+            else
+                response["sequence_id"] = "";
+
+            if (!m_MainPtr->preset_updater) {
+                response["error"] = "Printer update service is unavailable.";
+                wxString strJS = wxString::Format("HandleStudio(%s)", response.dump(-1, ' ', true));
+                wxGetApp().CallAfter([this, strJS] { RunScript(strJS); });
+            } else {
+                // Orca: enumerate vendors directly from disk rather than from m_ProfileJson["model"]
+                // — a vendor with no machine models (e.g. a filament-only bundle, or a test fixture
+                // like "test123" with an empty machine_model_list) never gets a "vendor" entry
+                // pushed into "model" by LoadProfileFamily(), so it would be invisible to the
+                // request body and get endlessly re-offered by the server. Scan both the system dir
+                // (already-installed vendors) and the bundled resources dir (shipped-but-not-yet-
+                // installed vendors), same as LoadProfileData() does when building loaded_vendors.
+                std::set<std::string> system_vendors;
+                for (const auto& dir : {vendor_dir, rsrc_vendor_dir}) {
+                    if (!boost::filesystem::exists(dir))
+                        continue;
+                    for (const auto& entry : boost::filesystem::directory_iterator(dir)) {
+                        if (!boost::filesystem::is_directory(entry) && boost::iequals(entry.path().extension().string(), ".json"))
+                            system_vendors.insert(entry.path().stem().string());
+                    }
+                }
+                // Orca: check_new_vendors() is async (network + confirmation dialog + download
+                // all happen off the calling thread apart from the dialog itself); guard against
+                // this dialog being closed before the callback fires.
+                wxWeakRef<GuideFrame> weak_this(this);
+                try {
+                    m_MainPtr->preset_updater->check_new_vendors(
+                        system_vendors, [weak_this, response](std::vector<std::string> installed_vendors, bool declined) mutable {
+                            if (!weak_this)
+                                return;
+
+                            // Orca: append the newly installed vendor(s) into the in-memory
+                            // profile data (instead of a full LoadProfileData() rescan of every
+                            // vendor) and push the refreshed list to the webview, the same way
+                            // request_userguide_profile does, so the printer list picks them up
+                            // without needing to reopen the guide.
+                            for (const auto& vendor_id : installed_vendors) {
+                                weak_this->LoadProfileFamily(vendor_id, (weak_this->vendor_dir / (vendor_id + ".json")).string());
+                            }
+                            if (!installed_vendors.empty()) {
+                                json profile_response            = json::object();
+                                profile_response["command"]      = "response_userguide_profile";
+                                profile_response["sequence_id"]  = "10001";
+                                profile_response["response"]     = weak_this->m_ProfileJson;
+                                wxString profileJS = wxString::Format("HandleStudio(%s)", profile_response.dump(-1, ' ', true));
+                                weak_this->RunScript(profileJS);
+                            }
+
+                            response["vendors"]  = installed_vendors;
+                            response["declined"] = declined;
+                            wxString strJS = wxString::Format("HandleStudio(%s)", response.dump(-1, ' ', true));
+                            weak_this->RunScript(strJS);
+                        });
+                } catch (const std::exception &e) {
+                    BOOST_LOG_TRIVIAL(warning) << "Failed to check for new printers: " << e.what();
+                    response["error"] = "Failed to check for new printers.";
+                    wxString strJS = wxString::Format("HandleStudio(%s)", response.dump(-1, ' ', true));
+                    wxGetApp().CallAfter([this, strJS] { RunScript(strJS); });
+                }
+            }
+        }
         else if (strCmd == "user_guide_finish") {
             SaveProfile();
 
@@ -1644,13 +1717,15 @@ int GuideFrame::LoadProfileFamily(std::string strVendor, std::string strFilePath
             OneModel["materials"]       = pm["default_materials"];
 
             // wxString strCoverPath = wxString::Format("%s\\%s\\%s_cover.png", strFolder, strVendor, std::string(s1.mb_str()));
-            std::string             cover_file = s1 + "_cover.png";
-            boost::filesystem::path cover_path = boost::filesystem::absolute(boost::filesystem::path(resources_dir()) / "/profiles/" / strVendor / cover_file).make_preferred();
+            std::string cover_file = s1 + "_cover.png";
+            boost::filesystem::path cover_path = boost::filesystem::absolute(vendor_dir / cover_file).make_preferred();
+            BOOST_LOG_TRIVIAL(info) << "[WebGuideDialog] " << cover_path;
             if (!boost::filesystem::exists(cover_path)) {
-                cover_path =
-                    (boost::filesystem::absolute(boost::filesystem::path(resources_dir()) / "/web/image/printer/") /
-                     cover_file)
-                        .make_preferred();
+                cover_path = boost::filesystem::absolute(boost::filesystem::path(resources_dir()) / "/profiles/" / strVendor / cover_file)
+                                 .make_preferred();
+                if (!boost::filesystem::exists(cover_path))
+                    cover_path = (boost::filesystem::absolute(boost::filesystem::path(resources_dir()) / "/web/image/printer/") / cover_file)
+                                     .make_preferred();
             }
             OneModel["cover"]                  = cover_path.string();
 
diff --git a/src/slic3r/GUI/WebGuideDialog.hpp b/src/slic3r/GUI/WebGuideDialog.hpp
index c4cfc8bf6d..1ad60175ae 100644
--- a/src/slic3r/GUI/WebGuideDialog.hpp
+++ b/src/slic3r/GUI/WebGuideDialog.hpp
@@ -43,6 +43,8 @@ namespace Slic3r { namespace GUI {
 class GuideFrame : public DPIDialog
 {
 public:
+    using json = nlohmann::json;
+
     GuideFrame(GUI_App *pGUI, long style = wxCAPTION | wxCLOSE_BOX | wxSYSTEM_MENU);
     virtual ~GuideFrame();
 
diff --git a/src/slic3r/GUI/WebViewDialog.hpp b/src/slic3r/GUI/WebViewDialog.hpp
index 123025ef85..bad0192115 100644
--- a/src/slic3r/GUI/WebViewDialog.hpp
+++ b/src/slic3r/GUI/WebViewDialog.hpp
@@ -108,13 +108,16 @@ public:
 private:
 
     wxWebView* m_browser;
+    wxButton *  m_button_stop;
+    wxTextCtrl *m_url;
+#if !BBL_RELEASE_TO_PUBLIC
+    // Created only by the internal-build toolbar in the constructor.
     wxBoxSizer *bSizer_toolbar;
     wxButton *  m_button_back;
     wxButton *  m_button_forward;
-    wxButton *  m_button_stop;
     wxButton *  m_button_reload;
-    wxTextCtrl *m_url;
     wxButton *  m_button_tools;
+#endif //BBL_RELEASE_TO_PUBLIC
 
     wxMenu* m_tools_menu;
     wxMenuItem* m_tools_handle_navigation;
@@ -143,7 +146,6 @@ private:
     wxMenuItem* m_dev_tools;
 
     wxInfoBar *m_info;
-    wxStaticText* m_info_text;
 
     long m_zoomFactor;
 
diff --git a/src/slic3r/GUI/Widgets/AMSItem.hpp b/src/slic3r/GUI/Widgets/AMSItem.hpp
index c43c71f580..ac4283b7e8 100644
--- a/src/slic3r/GUI/Widgets/AMSItem.hpp
+++ b/src/slic3r/GUI/Widgets/AMSItem.hpp
@@ -641,17 +641,11 @@ private:
     AMSRoadShowMode              m_road_mode      = {AMSRoadShowMode::AMS_ROAD_MODE_FOUR};
     AMSPassRoadSTEP              m_load_step      = {AMSPassRoadSTEP::AMS_ROAD_STEP_NONE};
 
-    bool     m_selected       = {false};
-    int      m_passroad_width = {6};
-    double   m_radius         = {4};
     wxColour m_road_def_color;
     wxColour m_road_color;
 
     std::vector<ScalableBitmap> ams_humidity_img;
 
-    int      m_humidity      = {0};
-    bool     m_show_humidity = {false};
-    bool     m_vams_loading{false};
     AMSModel m_ams_model;
 };
 
@@ -690,14 +684,10 @@ private:
 
     int             m_left_road_length     = {-1};
     int             m_right_road_length    = {-1};
-    int             m_passroad_width       = {6};
-    double          m_radius               = {4};
     AMSPassRoadSTEP m_pass_road_left_step  = {AMSPassRoadSTEP::AMS_ROAD_STEP_NONE};
     AMSPassRoadSTEP m_pass_road_right_step = {AMSPassRoadSTEP::AMS_ROAD_STEP_NONE};
 
     std::map<int, wxColour> m_road_color;
-    bool m_vams_loading{false};
-    AMSModel m_ams_model;
 };
 
 /*************************************************
diff --git a/src/slic3r/GUI/Widgets/Button.cpp b/src/slic3r/GUI/Widgets/Button.cpp
index 5a5bd89403..5f03636f18 100644
--- a/src/slic3r/GUI/Widgets/Button.cpp
+++ b/src/slic3r/GUI/Widgets/Button.cpp
@@ -162,6 +162,15 @@ void Button::SetCenter(bool isCenter)
 {
     this->isCenter = isCenter; }
 
+void Button::SetIndicator(bool on)
+{
+    if (m_show_indicator == on)
+        return;
+    m_show_indicator = on;
+    messureSize();
+    Refresh();
+}
+
 void Button::SetVertical(bool vertical)
 {
     this->vertical = vertical;
@@ -302,8 +311,11 @@ void Button::render(wxDC& dc)
         }
     }
     auto szContent = textSize;
+    // Whether the measured content reserved the text/icon gap. macOS measures an empty label
+    // as 0-high, so the gap is skipped there; the dot must not advance past it in that case.
+    const bool gap_reserved = szContent.y > 0;
     if (icon.bmp().IsOk()) {
-        if (szContent.y > 0) {
+        if (gap_reserved) {
             //BBS norrow size between text and icon
             if (vertical)
                 szContent.y += spacing;
@@ -324,6 +336,13 @@ void Button::render(wxDC& dc)
             szContent.x -= d;
         }
     }
+    if (m_show_indicator) {
+        const int dot = FromDIP(6);
+        if (vertical)
+            szContent.y += dot + FromDIP(6);
+        else
+            szContent.x += dot + FromDIP(6);
+    }
     // move to center
     wxRect rcContent = { {0, 0}, size };
     if (isCenter) {
@@ -341,10 +360,10 @@ void Button::render(wxDC& dc)
         dc.DrawBitmap(icon.bmp(), pt);
         //BBS norrow size between text and icon
         if (vertical) {
-            pt.y += szIcon.y + spacing;
+            pt.y += szIcon.y + (gap_reserved ? spacing : 0);
             pt.x = rcContent.x;
         } else {
-            pt.x += szIcon.x + spacing;
+            pt.x += szIcon.x + (gap_reserved ? spacing : 0);
             pt.y = rcContent.y;
         }
     }
@@ -364,6 +383,17 @@ void Button::render(wxDC& dc)
 #endif
         dc.DrawText(text, pt);
     }
+    if (m_show_indicator) {
+        const int dot = FromDIP(6); // diameter
+        wxPoint dot_pt;
+        dot_pt.x = pt.x + (text.IsEmpty() ? 0 : textSize.x) + FromDIP(6) + dot / 2;
+        // Centre on the content vertically; a bitmap-only (empty-label) tab has no text row.
+        dot_pt.y = text.IsEmpty() ? rcContent.y + rcContent.height / 2 : pt.y + textSize.y / 2;
+        const wxColour c = StateColor::darkModeColorFor(m_indicator_color);
+        dc.SetBrush(wxBrush(c));
+        dc.SetPen(wxPen(c));
+        dc.DrawCircle(dot_pt, dot / 2);
+    }
 }
 
 void Button::messureSize()
@@ -388,6 +418,14 @@ void Button::messureSize()
             if (szIcon.y > szContent.y) szContent.y = szIcon.y;
         }
     }
+    if (m_show_indicator) {
+        // Indicator dot sits to the right of the label: its diameter plus the gap from the text.
+        const int dot = FromDIP(6);
+        if (vertical)
+            szContent.y += dot + FromDIP(6);
+        else
+            szContent.x += dot + FromDIP(6);
+    }
     wxSize size = szContent + paddingSize * 2;
     if (minSize.GetHeight() > 0)
         size.SetHeight(minSize.GetHeight());
diff --git a/src/slic3r/GUI/Widgets/Button.hpp b/src/slic3r/GUI/Widgets/Button.hpp
index 2991edd425..758a9a4009 100644
--- a/src/slic3r/GUI/Widgets/Button.hpp
+++ b/src/slic3r/GUI/Widgets/Button.hpp
@@ -4,28 +4,30 @@
 #include "../wxExtensions.hpp"
 #include "StaticBox.hpp"
 #include <wx/tipwin.h>
+#include <wx/colour.h>
 
 class ButtonProps
 {
 public:
-    static int ChoiceButtonGap(){return 10;};
-    static int WindowButtonGap(){return 10;};
+    static int ChoiceButtonGap() { return 10; };
+    static int WindowButtonGap() { return 10; };
 };
 
-enum class ButtonStyle{
+enum class ButtonStyle {
     Regular,
     Confirm,
     Alert,
     Disabled,
 };
 
-enum class ButtonType{
-    Compact  , // Font10  FullyRounded  For spaces with less areas
-    Window   , // Font12  FullyRounded  For regular buttons in windows and not related with parameter boxes
-    Choice   , // Font14  Semi-Rounded  For dialog/window choice buttons
+enum class ButtonType {
+    Compact,   // Font10  FullyRounded  For spaces with less areas
+    Window,    // Font12  FullyRounded  For regular buttons in windows and not related with parameter boxes
+    Choice,    // Font14  Semi-Rounded  For dialog/window choice buttons
     Parameter, // Font14  Semi-Rounded  For buttons that near parameter boxes
-    Icon     , // ------  Semi-Rounded  For buttons that only has icons. icons should be 16x16 and iconSize has to be defined as 16 while creation of button
-    Expanded , // Font14  Semi-Rounded  For full length buttons. ex. buttons in static box
+    Icon,      // ------  Semi-Rounded  For buttons that only has icons. icons should be 16x16 and iconSize has to be defined as 16 while
+               // creation of button
+    Expanded,  // Font14  Semi-Rounded  For full length buttons. ex. buttons in static box
 };
 
 class Button : public StaticBox
@@ -36,15 +38,17 @@ class Button : public StaticBox
     wxSize paddingSize;
     ScalableBitmap active_icon;
 
-    StateColor   text_color;
+    StateColor text_color;
 
     bool pressedDown = false;
     bool m_selected  = true;
-    bool canFocus  = true;
+    bool canFocus    = true;
     bool isCenter    = true;
     bool vertical    = false;
+    bool m_show_indicator = false;
+    wxColour m_indicator_color = wxColour("#009688");
 
-    static const int buttonWidth = 200;
+    static const int buttonWidth  = 200;
     static const int buttonHeight = 50;
 
 public:
@@ -68,19 +72,23 @@ public:
 
     void SetStyle(const ButtonStyle style /*= ButtonStyle::Regular*/, const ButtonType type /*= ButtonType::None*/);
 
-    void SetTextColor(StateColor const &color);
+    void SetTextColor(StateColor const& color);
 
-    void SetTextColorNormal(wxColor const &color);
+    void SetTextColorNormal(wxColor const& color);
 
     void SetSelected(bool selected = true) { m_selected = selected; }
 
+    // Show a small coloured dot to the right of the label (used by TabCtrl tabs to flag that
+    // the tab's category has a selected/toggled setting).
+    void SetIndicator(bool on);
+
     // Only meant to be used by inspector, not public API
     ButtonStyle GetStyle() const { return m_style; }
-    ButtonType  GetType() const  { return m_type; }
-    bool IsSelected() const      { return m_selected; }
+    ButtonType GetType() const { return m_type; }
+    bool IsSelected() const { return m_selected; }
 
     bool Enable(bool enable = true) override;
-    void EnableTooltipEvenDisabled();// The tip will be shown even if the button is disabled
+    void EnableTooltipEvenDisabled(); // The tip will be shown even if the button is disabled
 
     void SetCanFocus(bool canFocus) override;
 
@@ -104,7 +112,7 @@ protected:
 private:
     bool m_has_style = false;
     ButtonStyle m_style;
-    ButtonType  m_type;
+    ButtonType m_type;
 
     void paintEvent(wxPaintEvent& evt);
 
@@ -115,10 +123,10 @@ private:
     // some useful events
     void mouseDown(wxMouseEvent& event);
     void mouseReleased(wxMouseEvent& event);
-    void mouseCaptureLost(wxMouseCaptureLostEvent &event);
-    void keyDownUp(wxKeyEvent &event);
+    void mouseCaptureLost(wxMouseCaptureLostEvent& event);
+    void keyDownUp(wxKeyEvent& event);
 
-    // 
+    //
     void sendButtonEvent();
 
     // parent motion
diff --git a/src/slic3r/GUI/Widgets/CheckList.cpp b/src/slic3r/GUI/Widgets/CheckList.cpp
index cd0dcebff3..c0101441ff 100644
--- a/src/slic3r/GUI/Widgets/CheckList.cpp
+++ b/src/slic3r/GUI/Widgets/CheckList.cpp
@@ -1,6 +1,7 @@
 #include "CheckList.hpp"
 
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/I18N.hpp"
 
 CheckList::CheckList(
     wxWindow* parent,
diff --git a/src/slic3r/GUI/Widgets/FanControl.cpp b/src/slic3r/GUI/Widgets/FanControl.cpp
index f10553814e..7efdfabf07 100644
--- a/src/slic3r/GUI/Widgets/FanControl.cpp
+++ b/src/slic3r/GUI/Widgets/FanControl.cpp
@@ -995,7 +995,7 @@ void FanControlPopupNew::init_names(MachineObject* obj) {
     radio_btn_name[AIR_DUCT::AIR_DUCT_HEATING_INTERNAL_FILT] = _L("Heating");
     radio_btn_name[AIR_DUCT::AIR_DUCT_EXHAUST] = _L("Exhaust");
     radio_btn_name[AIR_DUCT::AIR_DUCT_FULL_COOLING] = _L("Full Cooling");
-    radio_btn_name[AIR_DUCT::AIR_DUCT_INIT] = L("Init");
+    radio_btn_name[AIR_DUCT::AIR_DUCT_INIT] = _L("Init");
 
     air_door_func_name[AIR_DOOR::AIR_DOOR_FUNC_CHAMBER] = _L("Chamber");
     air_door_func_name[AIR_DOOR::AIR_DOOR_FUNC_INNERLOOP] = _L("Innerloop");
diff --git a/src/slic3r/GUI/Widgets/FanControl.hpp b/src/slic3r/GUI/Widgets/FanControl.hpp
index b13ce19d41..2badbf8594 100644
--- a/src/slic3r/GUI/Widgets/FanControl.hpp
+++ b/src/slic3r/GUI/Widgets/FanControl.hpp
@@ -212,7 +212,6 @@ private:
     wxGridSizer* m_sizer_fanControl { nullptr };
 
     wxBoxSizer *m_mode_sizer{ nullptr };
-    wxBoxSizer *m_bottom_sizer{ nullptr };
 
     // mode switch buttons
     std::unordered_map<int, SendModeSwitchButton*> m_mode_switch_btns; //<mode_id, SendModeSwitchButton>
diff --git a/src/slic3r/GUI/Widgets/MultiNozzleSync.cpp b/src/slic3r/GUI/Widgets/MultiNozzleSync.cpp
index 20944df553..9278565c47 100644
--- a/src/slic3r/GUI/Widgets/MultiNozzleSync.cpp
+++ b/src/slic3r/GUI/Widgets/MultiNozzleSync.cpp
@@ -20,6 +20,8 @@
 #include <set>
 
 #include <wx/choice.h>
+#include <wx/filename.h>
+#include <wx/filesys.h>
 #include <wx/sizer.h>
 #include <wx/stattext.h>
 
diff --git a/src/slic3r/GUI/Widgets/MultiNozzleSync.hpp b/src/slic3r/GUI/Widgets/MultiNozzleSync.hpp
index 3baea061dc..3e2e41ccb7 100644
--- a/src/slic3r/GUI/Widgets/MultiNozzleSync.hpp
+++ b/src/slic3r/GUI/Widgets/MultiNozzleSync.hpp
@@ -89,8 +89,6 @@ private:
 
     bool m_right_on{ true };
     wxStaticBitmap* badget;
-    Label* left;
-    Label* right;
     Label* left_diameter_desp;
     Label* right_diameter_desp;
     Label* left_flow_desp;
diff --git a/src/slic3r/GUI/Widgets/ProgressDialog.cpp b/src/slic3r/GUI/Widgets/ProgressDialog.cpp
index 53842ecaea..c16f3bcf1f 100644
--- a/src/slic3r/GUI/Widgets/ProgressDialog.cpp
+++ b/src/slic3r/GUI/Widgets/ProgressDialog.cpp
@@ -178,7 +178,7 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
         wxBoxSizer *sizer_1line = new wxBoxSizer(wxHORIZONTAL);
         m_msg                   = new wxStaticText(m_panel_1line, wxID_ANY, wxEmptyString, wxDefaultPosition, PROGRESSDIALOG_SIMPLEBOOK_SIZE, 0);
         m_msg->Wrap(-1);
-        m_msg->SetFont(::Label::Body_13);
+        m_msg->SetFont(::Label::Body_14);
         m_msg->SetForegroundColour(PROGRESSDIALOG_GREY_700);
         sizer_1line->Add(m_msg, 0, wxALIGN_CENTER, 0);
         m_panel_1line->SetSizer(sizer_1line);
@@ -188,7 +188,7 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
         wxBoxSizer *sizer_2line = new wxBoxSizer(wxVERTICAL);
         m_msg_2line             = new wxStaticText(m_panel_2line, wxID_ANY, wxEmptyString, wxDefaultPosition, PROGRESSDIALOG_SIMPLEBOOK_SIZE, 0);
         m_msg_2line->Wrap(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x);
-        m_msg_2line->SetFont(::Label::Body_13);
+        m_msg_2line->SetFont(::Label::Body_14);
         m_msg_2line->SetForegroundColour(PROGRESSDIALOG_GREY_700);
         m_msg_2line->SetMaxSize(wxSize(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x, -1));
         sizer_2line->Add(m_msg_2line, 1, wxALL, 0);
@@ -204,7 +204,7 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
 
         m_msg = new wxStaticText(m_msg_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxSize(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x, -1), 0);
         m_msg->Wrap(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x);
-        m_msg->SetFont(::Label::Body_13);
+        m_msg->SetFont(::Label::Body_14);
         m_msg->SetForegroundColour(PROGRESSDIALOG_GREY_700);
 
         m_msg_sizer->Add(m_msg, 0, wxEXPAND | wxALL, 0);
@@ -228,6 +228,9 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
     if (!HasPDFlag(wxPD_NO_PROGRESS)) {
         m_gauge = new wxGauge(this, wxID_ANY, maximum, wxDefaultPosition, PROGRESSDIALOG_GAUGE_SIZE, gauge_style);
         m_gauge->SetValue(0);
+        m_gauge->SetForegroundColour(wxColour("#009688"));
+        m_gauge->SetBackgroundColour(wxColour("#D9D9D9"));
+        wxGetApp().UpdateDarkUI(m_gauge);
         m_sizer_main->Add(m_gauge, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(28));
     }
 
diff --git a/src/slic3r/GUI/Widgets/ProgressDialog.hpp b/src/slic3r/GUI/Widgets/ProgressDialog.hpp
index bb770298a9..9ebf31b194 100644
--- a/src/slic3r/GUI/Widgets/ProgressDialog.hpp
+++ b/src/slic3r/GUI/Widgets/ProgressDialog.hpp
@@ -18,7 +18,7 @@ class WXDLLIMPEXP_FWD_CORE wxWindowDisabler;
 #define PROGRESSDIALOG_GAUGE_SIZE wxSize(FromDIP(320), FromDIP(6))
 #define PROGRESSDIALOG_CANCEL_BUTTON_SIZE wxSize(FromDIP(60), FromDIP(24))
 #define PROGRESSDIALOG_DEF_BK wxColour(255,255,255)
-#define PROGRESSDIALOG_GREY_700 wxColour(107,107,107)
+#define PROGRESSDIALOG_GREY_700 wxColour(54,54,54) // #363636 label color
 
 #define wxPD_NO_PROGRESS 0x0100
 
diff --git a/src/slic3r/GUI/Widgets/StaticBox.cpp b/src/slic3r/GUI/Widgets/StaticBox.cpp
index 6391c1a8c4..f6e7ca67f6 100644
--- a/src/slic3r/GUI/Widgets/StaticBox.cpp
+++ b/src/slic3r/GUI/Widgets/StaticBox.cpp
@@ -7,6 +7,7 @@ BEGIN_EVENT_TABLE(StaticBox, wxWindow)
 
 // catch paint events
 //EVT_ERASE_BACKGROUND(StaticBox::eraseEvent)
+EVT_SIZE(StaticBox::sizeEvent)
 EVT_PAINT(StaticBox::paintEvent)
 
 END_EVENT_TABLE()
@@ -140,6 +141,12 @@ void StaticBox::eraseEvent(wxEraseEvent& evt)
 #endif
 }
 
+void StaticBox::sizeEvent(wxSizeEvent& evt)
+{
+    Refresh();
+    evt.Skip();
+}
+
 void StaticBox::paintEvent(wxPaintEvent& evt)
 {
     // depending on your system you may need to look at double-buffered dcs
diff --git a/src/slic3r/GUI/Widgets/StaticBox.hpp b/src/slic3r/GUI/Widgets/StaticBox.hpp
index b7cdee34ef..363d431c8e 100644
--- a/src/slic3r/GUI/Widgets/StaticBox.hpp
+++ b/src/slic3r/GUI/Widgets/StaticBox.hpp
@@ -46,6 +46,8 @@ public:
 protected:
     void eraseEvent(wxEraseEvent& evt);
 
+    void sizeEvent(wxSizeEvent& evt);
+
     void paintEvent(wxPaintEvent& evt);
 
     void render(wxDC& dc);
diff --git a/src/slic3r/GUI/Widgets/TabCtrl.cpp b/src/slic3r/GUI/Widgets/TabCtrl.cpp
index 882d2f6897..ef23e2c5e4 100644
--- a/src/slic3r/GUI/Widgets/TabCtrl.cpp
+++ b/src/slic3r/GUI/Widgets/TabCtrl.cpp
@@ -2,8 +2,8 @@
 
 #include <wx/dc.h>
 
-wxDEFINE_EVENT( wxEVT_TAB_SEL_CHANGING, wxCommandEvent );
-wxDEFINE_EVENT( wxEVT_TAB_SEL_CHANGED, wxCommandEvent );
+wxDEFINE_EVENT(wxEVT_TAB_SEL_CHANGING, wxCommandEvent);
+wxDEFINE_EVENT(wxEVT_TAB_SEL_CHANGED, wxCommandEvent);
 
 BEGIN_EVENT_TABLE(TabCtrl, StaticBox)
 
@@ -22,11 +22,7 @@ END_EVENT_TABLE()
 #define TAB_BUTTON_PADDING_Y 2
 #define TAB_BUTTON_PADDING TAB_BUTTON_PADDING_X, TAB_BUTTON_PADDING_Y
 
-TabCtrl::TabCtrl(wxWindow *      parent,
-                   wxWindowID      id,
-                   const wxPoint & pos,
-                   const wxSize &  size,
-                   long            style)
+TabCtrl::TabCtrl(wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style)
     : StaticBox(parent, id, pos, size, style)
 {
 #if 0
@@ -42,14 +38,11 @@ TabCtrl::TabCtrl(wxWindow *      parent,
     hsizer->Add(sizer, 0, wxEXPAND | wxBOTTOM, border_width * 4);
     SetSizer(hsizer);
     Bind(wxEVT_COMMAND_BUTTON_CLICKED, &TabCtrl::buttonClicked, this);
-    //wxString reason;
-    //IsTransparentBackgroundSupported(&reason);
+    // wxString reason;
+    // IsTransparentBackgroundSupported(&reason);
 }
 
-TabCtrl::~TabCtrl()
-{
-    delete images;
-}
+TabCtrl::~TabCtrl() { delete images; }
 
 int TabCtrl::GetSelection() const { return sel; }
 
@@ -75,15 +68,13 @@ void TabCtrl::SelectItem(int item)
     Refresh();
 }
 
-void TabCtrl::Unselect()
-{
-    SelectItem(-1);
-}
+void TabCtrl::Unselect() { SelectItem(-1); }
 
 void TabCtrl::Rescale()
 {
-    for (auto & b : btns)
+    for (auto& b : btns)
         b->Rescale();
+    relayout();
 }
 
 bool TabCtrl::SetFont(wxFont const& font)
@@ -95,28 +86,32 @@ bool TabCtrl::SetFont(wxFont const& font)
     return true;
 }
 
-int TabCtrl::AppendItem(const wxString &item,
-                     int image, int selImage,
-                     void * clientData)
+int TabCtrl::AppendItem(const wxString& item, int image, int selImage, void* clientData)
 {
-    Button * btn = new Button();
+    Button* btn = new Button();
     btn->Create(this, item, "", wxBORDER_NONE);
     btn->SetFont(GetFont());
-    btn->SetTextColor(StateColor(
-        std::make_pair(0x6B6B6C, (int) StateColor::NotChecked),
-        std::make_pair(*wxLIGHT_GREY, (int) StateColor::Normal)));
+    btn->SetTextColor(
+        StateColor(std::make_pair(0x6B6B6C, (int) StateColor::NotChecked), std::make_pair(wxColour("#262E30"), (int) StateColor::Normal)));
     btn->SetBackgroundColor(StateColor());
     btn->SetCornerRadius(0);
     btn->SetPaddingSize({TAB_BUTTON_PADDING});
     btns.push_back(btn);
     if (btns.size() > 1)
         sizer->GetItem(sizer->GetItemCount() - 1)->SetMinSize({0, 0});
-    sizer->Add(btn, 0, wxALIGN_CENTER_VERTICAL | wxLEFT | wxRIGHT, TAB_BUTTON_SPACE);
+    sizer->Add(btn, 0, wxALIGN_CENTER_VERTICAL);
     sizer->AddStretchSpacer(1);
     relayout();
     return btns.size() - 1;
 }
 
+int TabCtrl::AppendItem(const wxString& item, const wxBitmap& bitmap, void* clientData)
+{
+    const int index = AppendItem(item, -1, -1, clientData);
+    SetItemBitmap(index, bitmap);
+    return index;
+}
+
 bool TabCtrl::DeleteItem(int item)
 {
     if (item < 0 || item >= btns.size()) {
@@ -136,7 +131,7 @@ bool TabCtrl::DeleteItem(int item)
         sizer->GetItem(sizer->GetItemCount() - 1)->SetMinSize({0, 0});
 
     if (selection_changed) {
-        sel--;  // `relayout()` uses `sel` so we need to update this before calling `relayout()`
+        sel--; // `relayout()` uses `sel` so we need to update this before calling `relayout()`
     }
     relayout();
     if (selection_changed) {
@@ -159,75 +154,87 @@ void TabCtrl::DeleteAllItems()
 
 unsigned int TabCtrl::GetCount() const { return btns.size(); }
 
-wxString TabCtrl::GetItemText(unsigned int item) const
+wxString TabCtrl::GetItemText(unsigned int item) const { return item < btns.size() ? btns[item]->GetLabel() : wxString{}; }
+
+void TabCtrl::SetItemText(unsigned int item, wxString const& value)
 {
-    return item < btns.size() ? btns[item]->GetLabel() : wxString{};
+    if (item >= btns.size())
+        return;
+    btns[item]->SetLabel(value);
 }
 
-void TabCtrl::SetItemText(unsigned int item, wxString const &value)
+void TabCtrl::SetItemBitmap(unsigned int item, const wxBitmap& bitmap)
 {
-    if (item >= btns.size()) return;
-    btns[item]->SetLabel(value);
+    if (item >= btns.size())
+        return;
+    btns[item]->SetIcon(bitmap);
+    relayout();
+}
+
+void TabCtrl::SetItemIndicator(unsigned int item, bool on)
+{
+    if (item >= btns.size())
+        return;
+    btns[item]->SetIndicator(on);
+    relayout();
 }
 
 bool TabCtrl::GetItemBold(unsigned int item) const
 {
-    if (item >= btns.size()) return false;
+    if (item >= btns.size())
+        return false;
     return btns[item]->GetFont() == bold;
 }
 
 void TabCtrl::SetItemBold(unsigned int item, bool bold)
 {
-    if (item >= btns.size()) return;
+    if (item >= btns.size())
+        return;
     btns[item]->SetFont(bold ? this->bold : GetFont());
     btns[item]->Rescale();
 }
 
 void* TabCtrl::GetItemData(unsigned int item) const
 {
-    if (item >= btns.size()) return nullptr;
+    if (item >= btns.size())
+        return nullptr;
     return btns[item]->GetClientData();
 }
 
 void TabCtrl::SetItemData(unsigned int item, void* clientData)
 {
-    if (item >= btns.size()) return;
+    if (item >= btns.size())
+        return;
     btns[item]->SetClientData(clientData);
 }
 
 void TabCtrl::AssignImageList(wxImageList* imageList)
 {
-    if (images == imageList) return;
+    if (images == imageList)
+        return;
     delete images;
     images = imageList;
 }
 
-void TabCtrl::SetItemTextColour(unsigned int item, const StateColor &col)
+void TabCtrl::SetItemTextColour(unsigned int item, const StateColor& col)
 {
-    if (item >= btns.size()) return;
+    if (item >= btns.size())
+        return;
     btns[item]->SetTextColor(col);
 }
 
-int TabCtrl::GetFirstVisibleItem() const
-{
-    return btns.size() == 0 ? -1 : 0;
-}
+int TabCtrl::GetFirstVisibleItem() const { return btns.size() == 0 ? -1 : 0; }
 
-int TabCtrl::GetNextVisible(int item) const
-{
-    return ++item < btns.size() ? item : -1;
-}
+int TabCtrl::GetNextVisible(int item) const { return ++item < btns.size() ? item : -1; }
 
-bool TabCtrl::IsVisible(unsigned int item) const
-{
-    return true;
-}
+bool TabCtrl::IsVisible(unsigned int item) const { return true; }
 
 void TabCtrl::DoSetSize(int x, int y, int width, int height, int sizeFlags)
 {
     auto size = GetSize();
     wxWindow::DoSetSize(x, y, width, height, sizeFlags);
-    if (size == GetSize()) return;
+    if (size == GetSize())
+        return;
     relayout();
 }
 
@@ -235,7 +242,9 @@ void TabCtrl::DoSetSize(int x, int y, int width, int height, int sizeFlags)
 
 WXLRESULT TabCtrl::MSWWindowProc(WXUINT nMsg, WXWPARAM wParam, WXLPARAM lParam)
 {
-    if (nMsg == WM_GETDLGCODE) { return DLGC_WANTARROWS; }
+    if (nMsg == WM_GETDLGCODE) {
+        return DLGC_WANTARROWS;
+    }
     return wxWindow::MSWWindowProc(nMsg, wParam, lParam);
 }
 
@@ -244,15 +253,15 @@ WXLRESULT TabCtrl::MSWWindowProc(WXUINT nMsg, WXWPARAM wParam, WXLPARAM lParam)
 void TabCtrl::relayout()
 {
     int offset = 10;
-    int item = sel + 1;
-    int first = 0;
+    int item   = sel + 1;
+    int first  = 0;
     for (int i = 0; i < item; ++i)
-        offset += btns[i]->GetMinSize().x + TAB_BUTTON_SPACE * 2;
+        offset += btns[i]->GetMinSize().x;
     if (item < btns.size())
-        offset += btns[item]->GetMinSize().x + TAB_BUTTON_SPACE * 2;
-    int  width = GetSize().x;
+        offset += btns[item]->GetMinSize().x;
+    int width = GetSize().x;
     for (int i = 0; i < btns.size(); ++i) {
-        auto size = btns[i]->GetMinSize().x + TAB_BUTTON_SPACE * 2;
+        auto size = btns[i]->GetMinSize().x;
         if (i < sel && offset > width) {
             sizer->Show(i * 2 + 1, false);
             sizer->Show(i * 2 + 2, false);
@@ -273,14 +282,23 @@ void TabCtrl::relayout()
         sizer->GetItem(i * 2 + 2)->SetMinSize({0, 0});
     }
     if (item >= btns.size())
-        -- item;
+        --item;
     // Keep spacing 2 ~ 10 TAB_BUTTON_SPACE
-    int b = GetSize().x - offset - 10 - (item + 1 - first) * TAB_BUTTON_SPACE * 8;
+    int b = GetSize().x - offset - 10 - (item + 1 - first) * 16;
     sizer->GetItem(item * 2 + 2)->SetMinSize({b > 0 ? b : 0, 0});
     Layout();
 }
 
-void TabCtrl::buttonClicked(wxCommandEvent &event)
+int TabCtrl::GetFullSize() const
+{
+    // Mirrors relayout(): a 10px leading spacer plus every button's min width.
+    int width = 10;
+    for (const Button* btn : btns)
+        width += btn->GetMinSize().x;
+    return width;
+}
+
+void TabCtrl::buttonClicked(wxCommandEvent& event)
 {
     SetFocus();
     auto btn  = event.GetEventObject();
@@ -288,7 +306,7 @@ void TabCtrl::buttonClicked(wxCommandEvent &event)
     SelectItem(iter == btns.end() ? -1 : iter - btns.begin());
 }
 
-void TabCtrl::keyDown(wxKeyEvent &event)
+void TabCtrl::keyDown(wxKeyEvent& event)
 {
     switch (event.GetKeyCode()) {
     case WXK_UP:
@@ -307,11 +325,13 @@ void TabCtrl::keyDown(wxKeyEvent &event)
 void TabCtrl::doRender(wxDC& dc)
 {
     wxSize size = GetSize();
-    int states = state_handler.states();
-    if (sel < 0) { return; }
+    int states  = state_handler.states();
+    if (sel < 0) {
+        return;
+    }
 
-    auto x1 = btns[sel]->GetPosition().x;
-    auto x2 = x1 + btns[sel]->GetSize().x;
+    auto x1       = btns[sel]->GetPosition().x;
+    auto x2       = x1 + btns[sel]->GetSize().x;
     const int BS2 = (1 + border_width) / 2;
 #if 0
     const int BS = border_width / 2;
diff --git a/src/slic3r/GUI/Widgets/TabCtrl.hpp b/src/slic3r/GUI/Widgets/TabCtrl.hpp
index 04b5b8e24e..d89da145af 100644
--- a/src/slic3r/GUI/Widgets/TabCtrl.hpp
+++ b/src/slic3r/GUI/Widgets/TabCtrl.hpp
@@ -3,32 +3,29 @@
 
 #include "Button.hpp"
 
-wxDECLARE_EVENT( wxEVT_TAB_SEL_CHANGING, wxCommandEvent );
-wxDECLARE_EVENT( wxEVT_TAB_SEL_CHANGED, wxCommandEvent );
+wxDECLARE_EVENT(wxEVT_TAB_SEL_CHANGING, wxCommandEvent);
+wxDECLARE_EVENT(wxEVT_TAB_SEL_CHANGED, wxCommandEvent);
 
 class TabCtrl : public StaticBox
 {
     std::vector<Button*> btns;
     wxImageList* images = nullptr;
-    wxBoxSizer * sizer = nullptr;
+    wxBoxSizer* sizer   = nullptr;
 
     int sel = -1;
     wxFont bold;
 
 public:
-    TabCtrl(wxWindow *      parent,
-             wxWindowID      id,
-             const wxPoint & pos       = wxDefaultPosition,
-             const wxSize &  size      = wxDefaultSize,
-             long            style     = 0);
+    TabCtrl(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0);
 
     ~TabCtrl();
 
 public:
-    virtual bool SetFont(wxFont const & font) override;
+    virtual bool SetFont(wxFont const& font) override;
 
 public:
-    int AppendItem(const wxString &item, int image = -1, int selImage = -1, void *clientData = nullptr);
+    int AppendItem(const wxString& item, int image = -1, int selImage = -1, void* clientData = nullptr);
+    int AppendItem(const wxString& item, const wxBitmap& bitmap, void* clientData = nullptr);
 
     bool DeleteItem(int item);
 
@@ -36,7 +33,7 @@ public:
 
     unsigned int GetCount() const;
 
-    int  GetSelection() const;
+    int GetSelection() const;
 
     void SelectItem(int item);
 
@@ -45,15 +42,19 @@ public:
     virtual void Rescale();
 
     wxString GetItemText(unsigned int item) const;
-    void     SetItemText(unsigned int item, wxString const &value);
+    void SetItemText(unsigned int item, wxString const& value);
+    void SetItemBitmap(unsigned int item, const wxBitmap& bitmap);
 
-    bool     GetItemBold(unsigned int item) const;
-    void     SetItemBold(unsigned int item, bool bold);
+    // Show/hide the small "has selection" dot next to a tab's text.
+    void SetItemIndicator(unsigned int item, bool on);
 
-    void*    GetItemData(unsigned int item) const;
-    void     SetItemData(unsigned int item, void *clientData);
-    
-    void AssignImageList(wxImageList *imageList);
+    bool GetItemBold(unsigned int item) const;
+    void SetItemBold(unsigned int item, bool bold);
+
+    void* GetItemData(unsigned int item) const;
+    void SetItemData(unsigned int item, void* clientData);
+
+    void AssignImageList(wxImageList* imageList);
 
     void SetItemTextColour(unsigned int item, const StateColor& col);
 
@@ -62,6 +63,8 @@ public:
     int GetNextVisible(int item) const;
     bool IsVisible(unsigned int item) const;
 
+    int GetFullSize() const;
+
 private:
     virtual void DoSetSize(int x, int y, int width, int height, int sizeFlags = wxSIZE_AUTO) override;
 
@@ -71,10 +74,10 @@ private:
 
     void relayout();
 
-    void buttonClicked(wxCommandEvent & event);
-    void keyDown(wxKeyEvent &event);
+    void buttonClicked(wxCommandEvent& event);
+    void keyDown(wxKeyEvent& event);
 
-    void doRender(wxDC & dc) override;
+    void doRender(wxDC& dc) override;
 
     // some useful events
     bool sendTabCtrlEvent(bool changing = false);
diff --git a/src/slic3r/GUI/Widgets/TempInput.cpp b/src/slic3r/GUI/Widgets/TempInput.cpp
index 6705378dac..79899940d1 100644
--- a/src/slic3r/GUI/Widgets/TempInput.cpp
+++ b/src/slic3r/GUI/Widgets/TempInput.cpp
@@ -275,9 +275,9 @@ void TempInput::Warning(bool warn, WarningType type)
 
         wxString warning_string;
         if (type == WarningType::WARNING_TOO_HIGH)
-             warning_string = _L("The maximum temperature cannot exceed ") + wxString::Format("%d", max_temp);
+             warning_string = wxString::Format(_L("The maximum temperature cannot exceed %d"), max_temp);
         else if (type == WarningType::WARNING_TOO_LOW)
-             warning_string = _L("The minmum temperature should not be less than ") + wxString::Format("%d", min_temp);
+             warning_string = wxString::Format(_L("The minimum temperature should not be less than %d"), min_temp);
         warning_text->SetLabel(warning_string);
         warning_text->Wrap(-1);
         warning_text->Fit();
diff --git a/src/slic3r/GUI/Widgets/WebView.cpp b/src/slic3r/GUI/Widgets/WebView.cpp
index e281d97407..a29a3cb725 100644
--- a/src/slic3r/GUI/Widgets/WebView.cpp
+++ b/src/slic3r/GUI/Widgets/WebView.cpp
@@ -1,9 +1,13 @@
 #include "WebView.hpp"
+#include "slic3r/GUI/Widgets/StateColor.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
 #include "slic3r/Utils/MacDarkMode.hpp"
 
 #include <boost/log/trivial.hpp>
 
+#include <chrono>
+#include <thread>
+
 #include <wx/webviewarchivehandler.h>
 #include <wx/webviewfshandler.h>
 #if wxUSE_WEBVIEW_EDGE
@@ -12,6 +16,8 @@
 #include <wx/osx/webview_webkit.h>
 #endif
 #include <wx/uri.h>
+#include <wx/filename.h>
+#include <wx/stdpaths.h>
 #if defined(__WIN32__) || defined(__WXMAC__)
 #include "wx/private/jsscriptwrapper.h"
 #endif
@@ -73,7 +79,7 @@ DWORD DownloadAndInstallWV2RT() {
       })
       .perform_sync();
   // Sleep for 1 second to wait for the buffer writen into disk
-  std::this_thread::sleep_for(1000ms);
+  std::this_thread::sleep_for(std::chrono::milliseconds(1000));
   if (downloaded) {
     // Either Package the WebView2 Bootstrapper with your app or download it using fwlink
     // Then invoke install at Runtime.
diff --git a/src/slic3r/GUI/WipeTowerDialog.cpp b/src/slic3r/GUI/WipeTowerDialog.cpp
index d4fbcc6fe3..9a473c7c8a 100644
--- a/src/slic3r/GUI/WipeTowerDialog.cpp
+++ b/src/slic3r/GUI/WipeTowerDialog.cpp
@@ -6,6 +6,7 @@
 #include "GUI.hpp"
 #include "I18N.hpp"
 #include "GUI_App.hpp"
+#include "WebViewDialog.hpp"
 #include "MsgDialog.hpp"
 #include "format.hpp"
 #include "libslic3r/Color.hpp"
diff --git a/src/slic3r/Utils/3DPrinterOS.cpp b/src/slic3r/Utils/3DPrinterOS.cpp
index 61fcc80d5b..503dbe63e3 100755
--- a/src/slic3r/Utils/3DPrinterOS.cpp
+++ b/src/slic3r/Utils/3DPrinterOS.cpp
@@ -8,6 +8,7 @@
 #include <boost/property_tree/ptree.hpp>
 #include <boost/property_tree/json_parser.hpp>
 #include <boost/algorithm/string/predicate.hpp>
+#include <nlohmann/json.hpp>
 
 #include <wx/progdlg.h>
 #include <wx/string.h>
@@ -30,6 +31,8 @@
 #include <wx/busyinfo.h>
 
 
+using json = nlohmann::json;
+
 namespace fs = boost::filesystem;
 namespace pt = boost::property_tree;
 
diff --git a/src/slic3r/Utils/BBLCloudServiceAgent.cpp b/src/slic3r/Utils/BBLCloudServiceAgent.cpp
index 846e4ce509..801ad1cf57 100644
--- a/src/slic3r/Utils/BBLCloudServiceAgent.cpp
+++ b/src/slic3r/Utils/BBLCloudServiceAgent.cpp
@@ -8,6 +8,9 @@
 #include <sstream>
 #include <boost/algorithm/string/replace.hpp>
 #include <nlohmann/json.hpp>
+
+using json = nlohmann::json;
+
 namespace Slic3r {
 
 
diff --git a/src/slic3r/Utils/BBLNetworkPlugin.cpp b/src/slic3r/Utils/BBLNetworkPlugin.cpp
index 607e7d16d1..d795abf354 100644
--- a/src/slic3r/Utils/BBLNetworkPlugin.cpp
+++ b/src/slic3r/Utils/BBLNetworkPlugin.cpp
@@ -349,7 +349,7 @@ void* BBLNetworkPlugin::get_function(const char* name)
         return function;
 
 #if defined(_MSC_VER) || defined(_WIN32)
-    function = GetProcAddress(m_networking_module, name);
+    function = reinterpret_cast<void*>(GetProcAddress(m_networking_module, name));
 #else
     function = dlsym(m_networking_module, name);
 #endif
diff --git a/src/slic3r/Utils/BBLPrinterAgent.cpp b/src/slic3r/Utils/BBLPrinterAgent.cpp
index 5e73edf84c..0c6225cc55 100644
--- a/src/slic3r/Utils/BBLPrinterAgent.cpp
+++ b/src/slic3r/Utils/BBLPrinterAgent.cpp
@@ -8,6 +8,7 @@
 #include <nlohmann/json.hpp>
 using json = nlohmann::json;
 
+#include <type_traits>
 #include <unordered_map>
 
 namespace Slic3r {
@@ -90,6 +91,16 @@ OnMessageFn to_orca_messages(OnMessageFn fn)
     return [fn = std::move(fn)](std::string dev_id, std::string msg) { fn(std::move(dev_id), BBLPrinterAgent::to_orca_payload(std::move(msg))); };
 }
 
+// Retypes a plug-in entry point for an older plug-in generation. The detour through the
+// generic function pointer marks the signature change as deliberate, which a direct cast
+// between two signatures does not.
+template <typename To, typename From>
+To as_abi(From fn)
+{
+    static_assert(std::is_function_v<std::remove_pointer_t<From>>, "as_abi retypes a function pointer");
+    return reinterpret_cast<To>(reinterpret_cast<void (*)()>(fn));
+}
+
 } // namespace
 
 std::string BBLPrinterAgent::to_orca_filament_id(const std::string& printer_filament_id) const
@@ -141,7 +152,7 @@ int BBLPrinterAgent::send_message(std::string dev_id, std::string json_str, int
         // series through the legacy form would silently drop MessageFlag sign/encrypt.
         switch (plugin.network_abi()) {
         case NetworkAbi::Legacy: {
-            auto legacy_func = reinterpret_cast<func_send_message_legacy>(func);
+            auto legacy_func = as_abi<func_send_message_legacy>(func);
             return legacy_func(agent, std::move(dev_id), std::move(json_str), qos);
         }
         case NetworkAbi::V0203:
@@ -185,7 +196,7 @@ int BBLPrinterAgent::send_message_to_printer(std::string dev_id, std::string jso
     if (func && agent) {
         switch (plugin.network_abi()) {
         case NetworkAbi::Legacy: {
-            auto legacy_func = reinterpret_cast<func_send_message_to_printer_legacy>(func);
+            auto legacy_func = as_abi<func_send_message_to_printer_legacy>(func);
             return legacy_func(agent, std::move(dev_id), std::move(json_str), qos);
         }
         case NetworkAbi::V0203:
@@ -275,7 +286,7 @@ int BBLPrinterAgent::bind(std::string dev_ip, std::string dev_id, std::string de
         switch (plugin.network_abi()) {
         case NetworkAbi::Legacy:
         case NetworkAbi::V0203: {
-            auto older_func = reinterpret_cast<func_bind_pre0208>(func);
+            auto older_func = as_abi<func_bind_pre0208>(func);
             return older_func(agent, dev_ip, dev_id, sec_link, timezone, improved, update_fn);
         }
         case NetworkAbi::Current:
@@ -436,9 +447,9 @@ int dispatch_start(CurrentFn func, PrintParams& params, const CallbackFns&... ca
     params.ams_mapping_info = BBLPrinterAgent::from_orca_payload(std::move(params.ams_mapping_info));
     switch (plugin.network_abi()) {
     case NetworkAbi::Legacy:
-        return reinterpret_cast<LegacyFn>(func)(agent, BBLNetworkPlugin::as_legacy(params), callbacks...);
+        return as_abi<LegacyFn>(func)(agent, BBLNetworkPlugin::as_legacy(params), callbacks...);
     case NetworkAbi::V0203:
-        return reinterpret_cast<Fn0203>(func)(agent, BBLNetworkPlugin::as_0203(params), callbacks...);
+        return as_abi<Fn0203>(func)(agent, BBLNetworkPlugin::as_0203(params), callbacks...);
     case NetworkAbi::Current:
         return func(agent, std::move(params), callbacks...);
     default:
diff --git a/src/slic3r/Utils/CalibUtils.cpp b/src/slic3r/Utils/CalibUtils.cpp
index 499228d13c..e432ccc152 100644
--- a/src/slic3r/Utils/CalibUtils.cpp
+++ b/src/slic3r/Utils/CalibUtils.cpp
@@ -3,6 +3,7 @@
 #include "../GUI/GUI_App.hpp"
 #include "../GUI/DeviceCore/DevStorage.h"
 #include "../GUI/DeviceManager.hpp"
+#include "NetworkAgent.hpp"
 #include "../GUI/Jobs/ProgressIndicator.hpp"
 #include "../GUI/PartPlate.hpp"
 #include "libslic3r/CutUtils.hpp"
@@ -1095,6 +1096,7 @@ bool CalibUtils::calib_generic_PA(const CalibInfo &calib_info, wxString &error_m
         calib_pa_pattern(calib_info, model);
 
     DynamicPrintConfig print_config    = calib_info.print_prest->config;
+    print_config.set_key_value("wipe_inward", new ConfigOptionBool(false));
     DynamicPrintConfig filament_config = calib_info.filament_prest->config;
     DynamicPrintConfig printer_config  = calib_info.printer_prest->config;
 
@@ -1356,6 +1358,7 @@ void CalibUtils::calib_retraction(const CalibInfo &calib_info, wxString &error_m
     read_model_from_file(input_file, model);
 
     DynamicPrintConfig print_config    = calib_info.print_prest->config;
+    print_config.set_key_value("wipe_inward", new ConfigOptionBool(false));
     DynamicPrintConfig filament_config = calib_info.filament_prest->config;
     DynamicPrintConfig printer_config  = calib_info.printer_prest->config;
 
diff --git a/src/slic3r/Utils/CloudProvider.hpp b/src/slic3r/Utils/CloudProvider.hpp
new file mode 100644
index 0000000000..0f03683222
--- /dev/null
+++ b/src/slic3r/Utils/CloudProvider.hpp
@@ -0,0 +1,11 @@
+#pragma once
+
+#include <string>
+
+namespace Slic3r {
+
+// Identifiers of the cloud services an ICloudServiceAgent can stand for.
+static const std::string ORCA_CLOUD_PROVIDER("orca");
+static const std::string BBL_CLOUD_PROVIDER("bbl");
+
+} // namespace Slic3r
diff --git a/src/slic3r/Utils/CrealityPrintAgent.cpp b/src/slic3r/Utils/CrealityPrintAgent.cpp
index 9b3bd5843e..f340a61267 100644
--- a/src/slic3r/Utils/CrealityPrintAgent.cpp
+++ b/src/slic3r/Utils/CrealityPrintAgent.cpp
@@ -12,6 +12,8 @@
 #include <map>
 #include <set>
 
+using json = nlohmann::json;
+
 namespace Slic3r {
 
 namespace {
diff --git a/src/slic3r/Utils/Http.cpp b/src/slic3r/Utils/Http.cpp
index f1ff056d10..6f43df74e4 100644
--- a/src/slic3r/Utils/Http.cpp
+++ b/src/slic3r/Utils/Http.cpp
@@ -254,10 +254,8 @@ int Http::priv::xfercb(void *userp, curl_off_t dltotal, curl_off_t dlnow, curl_o
 	bool cb_cancel = false;
 
 	if (self->progressfn) {
-		double speed;
+		double speed = 0.;
         curl_easy_getinfo(self->curl, CURLINFO_SPEED_UPLOAD, &speed);
-		if (speed > 0.01)
-			speed = speed;
 		Progress progress(dltotal, dlnow, ultotal, ulnow, self->buffer, speed);
 		self->progressfn(progress, cb_cancel);
 	}
@@ -323,8 +321,10 @@ void Http::priv::form_add_file(const char *name, const fs::path &path, const cha
 	// We can't use CURLFORM_FILECONTENT, because curl doesn't support Unicode filenames on Windows
 	// and so we use CURLFORM_STREAM with boost ifstream to read the file.
 
+	std::string filename_str;
 	if (filename == nullptr) {
-		filename = path.string().c_str();
+		filename_str = path.string();
+		filename = filename_str.c_str();
 	}
 
 	form_files.emplace_back(path, offset, length);
diff --git a/src/slic3r/Utils/ICloudServiceAgent.hpp b/src/slic3r/Utils/ICloudServiceAgent.hpp
index 556c253641..7d326eb4c6 100644
--- a/src/slic3r/Utils/ICloudServiceAgent.hpp
+++ b/src/slic3r/Utils/ICloudServiceAgent.hpp
@@ -2,6 +2,7 @@
 #define __I_CLOUD_SERVICE_AGENT_HPP__
 
 #include "bambu_networking.hpp"
+#include "CloudProvider.hpp"
 #include "../../libslic3r/ProjectTask.hpp"
 #include <string>
 #include <string_view>
@@ -37,9 +38,6 @@ namespace Slic3r {
  * implementation.
  */
 
-static const std::string ORCA_CLOUD_PROVIDER("orca");
-static const std::string BBL_CLOUD_PROVIDER("bbl");
-
 struct CloudEvent {
     std::string provider;  // ORCA_CLOUD_PROVIDER or BBL_CLOUD_PROVIDER
 };
diff --git a/src/slic3r/Utils/MacDarkMode.mm b/src/slic3r/Utils/MacDarkMode.mm
index cecd90044b..2bce7835e8 100644
--- a/src/slic3r/Utils/MacDarkMode.mm
+++ b/src/slic3r/Utils/MacDarkMode.mm
@@ -57,7 +57,7 @@ void set_miniaturizable(void * window)
     while(viewObject = (NSView *)[viewEnum nextObject]) {
         if([viewObject class] == [NSTextField self]) {
             //[(NSTextField*)viewObject setTextColor :  NSColor.whiteColor];
-            mainframe_text_field = viewObject;
+            mainframe_text_field = (NSTextField*)viewObject;
         }
     }
 }
@@ -74,7 +74,7 @@ void set_title_colour_after_set_title(void * window)
   while(viewObject = (NSView *)[viewEnum nextObject]) {
     if([viewObject class] == [NSTextField self]) {
       [(NSTextField*)viewObject setTextColor : NSColor.whiteColor];
-      mainframe_text_field = viewObject;
+      mainframe_text_field = (NSTextField*)viewObject;
     }
   }
 
diff --git a/src/slic3r/Utils/MeshInspect.cpp b/src/slic3r/Utils/MeshInspect.cpp
new file mode 100644
index 0000000000..0a60358278
--- /dev/null
+++ b/src/slic3r/Utils/MeshInspect.cpp
@@ -0,0 +1,61 @@
+#include "MeshInspect.hpp"
+
+#include "libslic3r/LayOnFace.hpp"
+#include "libslic3r/Model.hpp"
+
+#include <nlohmann/json.hpp>
+
+#include <algorithm>
+#include <cmath>
+#include <ostream>
+
+namespace Slic3r {
+namespace MeshInspect {
+
+using json = nlohmann::json;
+
+static json to_json(const Vec3d &v) { return json::array({ v.x(), v.y(), v.z() }); }
+
+static json to_json(const BoundingBoxf3 &bb)
+{
+    return { { "min", to_json(bb.min) }, { "max", to_json(bb.max) }, { "size", to_json(bb.size()) } };
+}
+
+void inspect_to_json(const Model &model, const std::vector<std::string> &source_paths, std::ostream &out, size_t max_planes)
+{
+    json objects = json::array();
+    for (const ModelObject *mo : model.objects) {
+        json obj = { { "name", mo->name },
+                     { "triangle_count", mo->facets_count() },
+                     { "instance_count", mo->instances.size() },
+                     { "bbox_object", to_json(mo->raw_mesh_bounding_box()) } };
+        if (!mo->instances.empty()) {
+            const std::vector<LayOnFacePlane> planes = lay_on_face_planes(*mo, mo->instances.front()->get_matrix_no_offset());
+            json planes_json = json::array();
+            for (size_t i = 0; i < std::min(planes.size(), max_planes); ++i)
+                planes_json.push_back({ { "normal", to_json(planes[i].normal) },
+                                        { "area_mm2", std::round(double(planes[i].area) * 1000.) / 1000. },
+                                        { "center", to_json(planes[i].center) } });
+            obj["bbox_world"]      = to_json(mo->instance_bounding_box(0));
+            obj["instance_offset"] = to_json(mo->instances.front()->get_offset());
+            obj["plane_count"]     = planes.size();
+            obj["planes"]          = std::move(planes_json);
+        }
+        objects.push_back(std::move(obj));
+    }
+
+    const json root = {
+        { "sources", source_paths },
+        { "note", "Lengths in mm. bbox_object and the plane normals and centers are in object coordinates: the parts as "
+                  "currently transformed, without the instance transformation. --ground-face-normal and "
+                  "--ground-face-point take values in these coordinates. area_mm2 uses instance 0's scale, "
+                  "bbox_world is instance 0 on the plate." },
+        { "objects", std::move(objects) },
+    };
+    // Object names and file paths are arbitrary bytes, and dump() throws on invalid UTF-8 by default.
+    // Replace such sequences with U+FFFD so the output is always valid JSON.
+    out << root.dump(2, ' ', false, json::error_handler_t::replace) << std::endl;
+}
+
+} // namespace MeshInspect
+} // namespace Slic3r
diff --git a/src/slic3r/Utils/MeshInspect.hpp b/src/slic3r/Utils/MeshInspect.hpp
new file mode 100644
index 0000000000..0f53b41c4a
--- /dev/null
+++ b/src/slic3r/Utils/MeshInspect.hpp
@@ -0,0 +1,20 @@
+#pragma once
+
+#include <iosfwd>
+#include <string>
+#include <vector>
+
+namespace Slic3r {
+
+class Model;
+
+namespace MeshInspect {
+
+// Writes the --inspect-mesh JSON for `model` to `out`: per object its bounding boxes and the faces
+// it can be laid on, taken from lay_on_face_planes() so they are the faces the --ground-* options
+// choose from, in the frame those options take. At most `max_planes` faces are listed per object,
+// largest first. `source_paths` lists every input file; the CLI merges them into one model.
+void inspect_to_json(const Model &model, const std::vector<std::string> &source_paths, std::ostream &out, size_t max_planes = 8);
+
+} // namespace MeshInspect
+} // namespace Slic3r
diff --git a/src/slic3r/Utils/MoonrakerPrinterAgent.cpp b/src/slic3r/Utils/MoonrakerPrinterAgent.cpp
index 571d707a9f..384a69d51e 100644
--- a/src/slic3r/Utils/MoonrakerPrinterAgent.cpp
+++ b/src/slic3r/Utils/MoonrakerPrinterAgent.cpp
@@ -3,6 +3,7 @@
 #include "libslic3r/Preset.hpp"
 #include "libslic3r/PresetBundle.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
+#include "slic3r/GUI/DeviceManager.hpp"
 #include "slic3r/GUI/DeviceCore/DevFilaSystem.h"
 #include "slic3r/GUI/DeviceCore/DevManager.h"
 #include "../GUI/DeviceCore/DevStorage.h"
diff --git a/src/slic3r/Utils/OrcaCloudServiceAgent.cpp b/src/slic3r/Utils/OrcaCloudServiceAgent.cpp
index 4bfe429cd3..5d129a490e 100644
--- a/src/slic3r/Utils/OrcaCloudServiceAgent.cpp
+++ b/src/slic3r/Utils/OrcaCloudServiceAgent.cpp
@@ -16,6 +16,7 @@
 #include <iostream>
 #include <libslic3r/Platform.hpp>
 #include <memory>
+#include <nlohmann/json.hpp>
 #include <openssl/evp.h>
 #include <openssl/hmac.h>
 #include <openssl/rand.h>
diff --git a/src/slic3r/Utils/PaintCLI.cpp b/src/slic3r/Utils/PaintCLI.cpp
new file mode 100644
index 0000000000..d99dc0b450
--- /dev/null
+++ b/src/slic3r/Utils/PaintCLI.cpp
@@ -0,0 +1,204 @@
+// PaintCLI.cpp — CLI paint-inspection primitives. See PaintCLI.hpp.
+#include "PaintCLI.hpp"
+
+#include "libslic3r/Model.hpp"
+#include "libslic3r/TriangleMesh.hpp"
+#include "libslic3r/TriangleSelector.hpp"
+
+#include <nlohmann/json.hpp>
+
+#include <cmath>
+#include <string>
+#include <utility>
+#include <vector>
+
+namespace Slic3r {
+namespace PaintCLI {
+
+namespace {
+
+using json = nlohmann::json;
+
+double its_surface_area(const indexed_triangle_set &its)
+{
+    double total = 0.0;
+    for (const stl_triangle_vertex_indices &t : its.indices) {
+        const Vec3f &a = its.vertices[t(0)];
+        const Vec3f &b = its.vertices[t(1)];
+        const Vec3f &c = its.vertices[t(2)];
+        total += 0.5 * (b - a).cross(c - a).norm();
+    }
+    return total;
+}
+
+// Bbox over triangle-referenced vertices only. get_facets_strict() returns
+// an itset with the full source vertex list — using bounding_box() on it
+// would report the whole mesh's bbox even when only a few facets are painted.
+BoundingBoxf3 its_referenced_bbox(const indexed_triangle_set &its)
+{
+    BoundingBoxf3 bb;
+    bool first = true;
+    for (const stl_triangle_vertex_indices &t : its.indices) {
+        for (int k = 0; k < 3; ++k) {
+            const Vec3d v = its.vertices[t(k)].cast<double>();
+            if (first) { bb.min = bb.max = v; first = false; }
+            else       bb.merge(v);
+        }
+    }
+    return bb;
+}
+
+json vec3_to_json(const Vec3d &v)
+{
+    return json::array({ v.x(), v.y(), v.z() });
+}
+
+json bbox_to_json(const BoundingBoxf3 &bb)
+{
+    return {
+        { "min",  vec3_to_json(bb.min) },
+        { "max",  vec3_to_json(bb.max) },
+        { "size", vec3_to_json(Vec3d(bb.max - bb.min)) },
+    };
+}
+
+// One (layer, state) row — empty ones are omitted at the caller level.
+json state_entry(const std::string &label, const indexed_triangle_set &its)
+{
+    return {
+        { "state",    label },
+        { "facets",   its.indices.size() },
+        { "area_mm2", its_surface_area(its) },
+        { "bbox",     bbox_to_json(its_referenced_bbox(its)) },
+    };
+}
+
+// Iterate the states relevant to one FacetsAnnotation kind, collecting
+// non-empty entries. Empty layer → {"empty": true}. `n_facets_out` is the
+// running total of painted facets — bumped for the summary.
+json inspect_layer(const ModelVolume &mv, const FacetsAnnotation &fa,
+                   const std::vector<std::pair<EnforcerBlockerType, std::string>> &states,
+                   size_t &n_facets_out)
+{
+    if (fa.empty())
+        return { { "empty", true } };
+
+    json entries = json::array();
+    for (const auto &st : states) {
+        if (!fa.has_facets(mv, st.first))
+            continue;
+        indexed_triangle_set its = fa.get_facets_strict(mv, st.first);
+        if (its.indices.empty())
+            continue;
+        n_facets_out += its.indices.size();
+        entries.push_back(state_entry(st.second, its));
+    }
+    return {
+        { "empty",  entries.empty() },
+        { "states", std::move(entries) },
+    };
+}
+
+const std::vector<std::pair<EnforcerBlockerType, std::string>> &supports_states()
+{
+    static const std::vector<std::pair<EnforcerBlockerType, std::string>> s = {
+        { EnforcerBlockerType::ENFORCER, "ENFORCER" },
+        { EnforcerBlockerType::BLOCKER,  "BLOCKER"  },
+    };
+    return s;
+}
+
+const std::vector<std::pair<EnforcerBlockerType, std::string>> &fuzzy_states()
+{
+    // FUZZY_SKIN is an enum alias for ENFORCER; the layer is single-state.
+    static const std::vector<std::pair<EnforcerBlockerType, std::string>> s = {
+        { EnforcerBlockerType::FUZZY_SKIN, "FUZZY_SKIN" },
+    };
+    return s;
+}
+
+const std::vector<std::pair<EnforcerBlockerType, std::string>> &mmu_states()
+{
+    static std::vector<std::pair<EnforcerBlockerType, std::string>> s = []{
+        std::vector<std::pair<EnforcerBlockerType, std::string>> v;
+        for (int i = 1; i <= int(EnforcerBlockerType::ExtruderMax); ++i)
+            v.emplace_back(EnforcerBlockerType(i), "extruder_" + std::to_string(i));
+        return v;
+    }();
+    return s;
+}
+
+} // namespace
+
+void inspect_to_json(const Model &model, const std::vector<std::string> &source_paths,
+                     std::ostream &out)
+{
+    json root;
+    root["sources"] = source_paths;
+    root["frame"]  = "mesh_local";
+    root["note"]   = "Coordinates are mesh-local (each volume's own frame). "
+                     "Paint gizmos operate in this frame.";
+
+    json objects = json::array();
+    size_t total_objects = 0, total_volumes = 0, total_painted = 0, total_facets = 0;
+
+    for (size_t oi = 0; oi < model.objects.size(); ++oi) {
+        const ModelObject *mo = model.objects[oi];
+        if (!mo) continue;
+        ++total_objects;
+
+        json obj;
+        obj["index"] = oi;
+        obj["name"]  = mo->name;
+
+        json volumes = json::array();
+        for (size_t vi = 0; vi < mo->volumes.size(); ++vi) {
+            const ModelVolume *mv = mo->volumes[vi];
+            if (!mv) continue;
+            ++total_volumes;
+
+            const indexed_triangle_set &its = mv->mesh().its;
+            json vol;
+            vol["index"]    = vi;
+            vol["name"]     = mv->name;
+            vol["n_facets"] = its.indices.size();
+            vol["is_model_part"] = mv->is_model_part();
+            vol["bbox_mesh_local"] = bbox_to_json(bounding_box(its));
+
+            size_t vol_painted = 0;
+            json paints;
+            paints["supports"]         = inspect_layer(*mv, mv->supported_facets,
+                                                      supports_states(),  vol_painted);
+            paints["seam"]             = inspect_layer(*mv, mv->seam_facets,
+                                                      supports_states(),  vol_painted);
+            paints["mmu_segmentation"] = inspect_layer(*mv, mv->mmu_segmentation_facets,
+                                                      mmu_states(),       vol_painted);
+            paints["fuzzy_skin"]       = inspect_layer(*mv, mv->fuzzy_skin_facets,
+                                                      fuzzy_states(),     vol_painted);
+            vol["paints"] = std::move(paints);
+            vol["painted_facets_total"] = vol_painted;
+
+            if (vol_painted > 0) ++total_painted;
+            total_facets += vol_painted;
+
+            volumes.push_back(std::move(vol));
+        }
+        obj["volumes"] = std::move(volumes);
+        objects.push_back(std::move(obj));
+    }
+    root["objects"] = std::move(objects);
+    root["summary"] = {
+        { "objects",                    total_objects },
+        { "volumes",                    total_volumes },
+        { "volumes_with_paint",         total_painted },
+        { "painted_facets_total",       total_facets  },
+    };
+
+    // Object names and file paths are arbitrary bytes, and dump() throws on invalid
+    // UTF-8 by default. Replace such sequences with U+FFFD so the output is always
+    // valid JSON rather than an exception out of the CLI.
+    out << root.dump(2, ' ', false, json::error_handler_t::replace) << std::endl;
+}
+
+} // namespace PaintCLI
+} // namespace Slic3r
diff --git a/src/slic3r/Utils/PaintCLI.hpp b/src/slic3r/Utils/PaintCLI.hpp
new file mode 100644
index 0000000000..8e31750b37
--- /dev/null
+++ b/src/slic3r/Utils/PaintCLI.hpp
@@ -0,0 +1,31 @@
+// PaintCLI.hpp — CLI paint-inspection primitives.
+//
+// Backs the --inspect-paint CLI action. Reads the per-facet enforcer /
+// blocker / extruder / fuzzy-skin state that OrcaSlicer stores on every
+// ModelVolume (supports, seam, MMU color, fuzzy-skin) and emits a
+// structured JSON summary — facet count, surface area, and mesh-local
+// bounding box per state — so CI / scripted / AI tooling can reason
+// about existing paint on a .3mf without opening the GUI.
+//
+// Coordinates are mesh-local (each volume's own frame), matching the
+// frame that the paint gizmos operate in.
+#ifndef slic3r_PaintCLI_hpp_
+#define slic3r_PaintCLI_hpp_
+
+#include <iosfwd>
+#include <string>
+#include <vector>
+
+namespace Slic3r {
+class Model;
+
+namespace PaintCLI {
+
+// `source_paths` lists every input file; the CLI merges them into one Model.
+void inspect_to_json(const Model &model, const std::vector<std::string> &source_paths,
+                     std::ostream &out);
+
+} // namespace PaintCLI
+} // namespace Slic3r
+
+#endif
diff --git a/src/slic3r/Utils/PresetUpdater.cpp b/src/slic3r/Utils/PresetUpdater.cpp
index 663a4ce8c3..5fd5898a1b 100644
--- a/src/slic3r/Utils/PresetUpdater.cpp
+++ b/src/slic3r/Utils/PresetUpdater.cpp
@@ -10,6 +10,7 @@
 #include <set>
 #include <string>
 #include <thread>
+#include <mutex>
 #include <unordered_map>
 #include <ostream>
 #include <utility>
@@ -29,6 +30,7 @@
 #include "libslic3r/format.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/PresetBundle.hpp"
+#include "libslic3r/PresetCacheFormat.hpp"
 #include "libslic3r_version.h"
 #include "slic3r/GUI/GUI.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
@@ -40,6 +42,7 @@
 #include "slic3r/GUI/format.hpp"
 #include "slic3r/GUI/NotificationManager.hpp"
 #include "slic3r/Utils/Http.hpp"
+#include "slic3r/Utils/bambu_networking.hpp"
 #include "slic3r/Config/Version.hpp"
 #include "slic3r/Config/Snapshot.hpp"
 #include "slic3r/GUI/MarkdownTip.hpp"
@@ -96,6 +99,8 @@ struct Update
 	bool forced_update;
 	//BBS: add directory support
 	bool is_directory {false};
+	// Orca: a vendor update may be the cache-only form.
+	bool is_opc {false};
 
 	Update() {}
 	//BBS: add directory support
@@ -126,13 +131,24 @@ struct Update
 	//BBS: add directory support
 	void install() const
 	{
-	    if (is_directory) {
+        if (is_directory) {
             copy_directory_recursively(source, target, file_filter);
-        }
-        else {
+        } else {
             copy_file_fix(source, target);
+
+            // A vendor must be installed in exactly one form. Remove the
+            // representation that would otherwise be stale or shadow this one.
+            boost::system::error_code ec;
+            if (is_opc) {
+                fs::remove(target.parent_path() / (vendor + ".json"), ec);
+                ec.clear();
+                fs::remove_all(target.parent_path() / vendor, ec);
+            }
+            else {
+                fs::remove(target.parent_path() / (vendor + ".opc"), ec);
+            }
         }
-	}
+    }
 
 	friend std::ostream& operator<<(std::ostream& os, const Update &self)
 	{
@@ -180,6 +196,8 @@ struct Updates
 	std::vector<Update> updates;
 };
 
+static bool reload_configs_update_gui();
+
 
 wxDEFINE_EVENT(EVT_SLIC3R_VERSION_ONLINE, wxCommandEvent);
 wxDEFINE_EVENT(EVT_SLIC3R_EXPERIMENTAL_VERSION_ONLINE, wxCommandEvent);
@@ -207,6 +225,10 @@ struct PresetUpdater::priv
 
     // Per-vendor update checking
     std::set<std::string> checked_vendors;
+    // Orca (PR #130): changelog text for each vendor, captured in memory during
+    // sync_vendor_config()/check_new_vendors() instead of written beside the cache.
+    std::unordered_map<std::string, std::string> vendor_changelogs;
+    mutable std::mutex vendor_changelogs_mutex;
     std::vector<std::thread> vendor_check_threads;
     std::atomic<bool> vendor_check_cancel{false};
 
@@ -231,6 +253,8 @@ struct PresetUpdater::priv
 	void parse_version_string(const std::string& body) const;
     void sync_resources(std::string http_url, std::map<std::string, Resource> &resources, bool check_patch = false,  std::string current_version="", std::string changelog_file="");
     void sync_vendor_config(const std::string& vendor_id);
+    void check_new_vendors(const std::set<std::string>& system_vendors,
+                            std::function<void(std::vector<std::string>, bool)> callback);
     void sync_tooltip(std::string http_url, std::string language);
     void sync_plugins(std::string http_url, std::string plugin_version);
     void sync_printer_config(std::string http_url);
@@ -268,7 +292,7 @@ void PresetUpdater::priv::set_download_prefs(AppConfig *app_config)
 	version_check_url = app_config->version_check_url();
 
 	auto profile_update_url = app_config->profile_update_url();
-	if (!profile_update_url.empty())
+	if (!profile_update_url.empty() && app_config->get_bool("enable_ota"))
 		enabled_config_update = true;
 	else
 		enabled_config_update = false;
@@ -671,6 +695,9 @@ void PresetUpdater::priv::sync_vendor_config(const std::string& vendor_id)
 
     std::string online_version_str; // this represents the PROFILE VERSION, not ORCA VERSION
     std::string download_url_str;
+    std::string changelog;
+
+    BOOST_LOG_TRIVIAL(info) << "[Orca Updater] fetching vendor update status from " << url;
 
     Http::get(url)
         .timeout_connect(5)
@@ -683,9 +710,12 @@ void PresetUpdater::priv::sync_vendor_config(const std::string& vendor_id)
             if (http_status != 200) return;
             try {
                 json j = json::parse(body);
+                BOOST_LOG_TRIVIAL(info) << "[Orca Updater] url: " << url << " returned:" << body;
+
                 if (j.contains("vendor_version") && j.contains("download_url")) {
                     online_version_str = j["vendor_version"].get<std::string>();
                     download_url_str = j["download_url"].get<std::string>();
+                    changelog        = j.value("changelog", std::string());
                 }
             } catch (const std::exception& e) {
                 BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] vendor check JSON parse failed: " << e.what();
@@ -707,6 +737,10 @@ void PresetUpdater::priv::sync_vendor_config(const std::string& vendor_id)
     boost::system::error_code ec;
     fs::remove_all(cache_profile_path / vendor_id, ec);
     fs::remove(cache_profile_path / (vendor_id + ".json"), ec);
+    // Orca: the OPC cache is the vendor's whole installation in one file; clear it too.
+    fs::remove(cache_profile_path / (vendor_id + ".opc"), ec);
+    // Best-effort cleanup of the legacy on-disk changelog written by older builds
+    // (changelogs are now kept in memory - see vendor_changelogs).
     fs::remove(cache_profile_path / (vendor_id + ".changelog"), ec);
 
     // Download the zip
@@ -735,7 +769,7 @@ void PresetUpdater::priv::sync_vendor_config(const std::string& vendor_id)
     if (!download_ok || cancel || vendor_check_cancel) return;
 
     // Extract vendor profile bundles under ota/profiles. The downloaded zip contains
-    // the vendor json/folder at its root.
+    // either the vendor json/folder or the vendor cache at its root.
     BOOST_LOG_TRIVIAL(info) << "[Orca Updater] extracting update for " << vendor_id;
     if (!extract_file(download_file, cache_profile_path)) {
         BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] extraction failed for " << vendor_id;
@@ -745,6 +779,27 @@ void PresetUpdater::priv::sync_vendor_config(const std::string& vendor_id)
 
     if (cancel || vendor_check_cancel) return;
 
+    const fs::path cached_vendor_json = cache_profile_path / (vendor_id + ".json");
+    const fs::path cached_vendor_folder = cache_profile_path / vendor_id;
+
+    const fs::path cached_vendor_opc = cache_profile_path / (vendor_id + ".opc");
+
+    bool is_json_update = fs::is_regular_file(cached_vendor_json) && fs::is_directory(cached_vendor_folder) && !fs::is_empty(cached_vendor_folder);
+    bool is_opc_update = fs::is_regular_file(cached_vendor_opc);
+    if (!is_json_update && !is_opc_update) {
+        BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] rejected update for " << vendor_id
+                                   << ": expected " << vendor_id << ".json and a non-empty "
+                                   << vendor_id << " directory, or OPC update format.";
+        fs::remove_all(cached_vendor_folder, ec);
+        fs::remove(cached_vendor_json, ec);
+        return;
+    }
+
+    {
+        std::lock_guard<std::mutex> lock(vendor_changelogs_mutex);
+        vendor_changelogs[vendor_id] = std::move(changelog);
+    }
+
     BOOST_LOG_TRIVIAL(info) << "[Orca Updater] vendor " << vendor_id << " update cached, notifying UI";
     GUI::wxGetApp().CallAfter([] {
         GUI::wxGetApp().check_config_updates_from_updater();
@@ -1039,6 +1094,7 @@ void PresetUpdater::priv::check_installed_vendor_profiles() const
     BOOST_LOG_TRIVIAL(info) << "[Orca Updater]:Checking whether the profile from resource is newer";
 
     AppConfig *app_config = GUI::wxGetApp().app_config;
+
     const auto enabled_vendors = app_config->vendors();
 
     std::set<std::string> bundles;
@@ -1051,8 +1107,8 @@ void PresetUpdater::priv::check_installed_vendor_profiles() const
 
         const auto is_vendor_enabled = (vendor_name == PresetBundle::ORCA_DEFAULT_BUNDLE) // always update configs from resource to vendor for ORCA_DEFAULT_BUNDLE
                                        || (enabled_vendors.find(vendor_name) != enabled_vendors.end());
-        if (enabled_config_update) {
-            if (is_vendor_installed(vendor_name)) {
+        if (is_vendor_installed(vendor_name)) {
+            if (enabled_config_update) {
                 if (is_vendor_enabled) {
                     // Orca: whichever form of the vendor resources ships at the newer
                     // version is the one installing lays down, and the one to judge
@@ -1067,17 +1123,12 @@ void PresetUpdater::priv::check_installed_vendor_profiles() const
                                                 << resource_ver.to_string() << " from resource, old version " << vendor_ver.to_string();
                         bundles.insert(vendor_name);
                     }
-                }
-                else {
-                    //need to be removed because not installed
+                } else {
+                    // need to be removed because not installed
                     remove_installed_vendor(vendor_name);
                 }
             }
-            else if (is_vendor_enabled) {
-                bundles.insert(vendor_name);
-            }
-        }
-        else if (is_vendor_enabled) {
+        } else if (is_vendor_enabled) {
             bundles.insert(vendor_name);
         }
     }
@@ -1147,68 +1198,110 @@ Updates PresetUpdater::priv::get_config_updates(const Semver &old_slic3r_version
     if (!fs::exists(cache_profile_path))
         return updates;
 
-    for (auto &dir_entry : boost::filesystem::directory_iterator(cache_profile_path)) {
-        const auto &path = dir_entry.path();
-        std::string file_path = path.string();
-        if (is_json_file(file_path)) {
-            const auto path_in_vendor = vendor_path / path.filename();
-            std::string vendor_name = path.filename().string();
-            // Remove the .json suffix.
-            vendor_name.erase(vendor_name.size() - 5);
-            auto print_in_cache = (cache_profile_path / vendor_name / PRESET_PRINT_NAME);
-            auto filament_in_cache = (cache_profile_path / vendor_name / PRESET_FILAMENT_NAME);
-            auto machine_in_cache = (cache_profile_path / vendor_name / PRESET_PRINTER_NAME);
+	// Orca (PR #130): vendor changelogs are captured in memory during
+	// sync_vendor_config()/check_new_vendors(), not written beside the cache.
+	std::unordered_map<std::string, std::string> changelogs;
+	{
+		std::lock_guard<std::mutex> lock(vendor_changelogs_mutex);
+		changelogs = vendor_changelogs;
+	}
 
-            if (is_vendor_installed(vendor_name)
-                || fs::exists(print_in_cache)
-                || fs::exists(filament_in_cache)
-                || fs::exists(machine_in_cache)) {
-                // Orca: a vendor installed as a preset cache carries its version there.
-                Semver vendor_ver = installed_vendor_version(vendor_name);
+	for (auto &dir_entry : boost::filesystem::directory_iterator(cache_profile_path)) {
+		const auto &path = dir_entry.path();
+		std::string file_path = path.string();
+		const bool is_opc_file = boost::iequals(path.extension().string(), ".opc");
+		if (!is_json_file(file_path) && !is_opc_file)
+			continue;
 
-                std::map<std::string, std::string> key_values;
-                std::vector<std::string> keys(3);
-				Semver cache_ver;
-                keys[0] = BBL_JSON_KEY_VERSION;
-                keys[1] = BBL_JSON_KEY_DESCRIPTION;
-                keys[2] = BBL_JSON_KEY_FORCE_UPDATE;
-                get_values_from_json(file_path, keys, key_values);
-                std::string description = key_values[BBL_JSON_KEY_DESCRIPTION];
-                bool force_update = false;
-                if (key_values.find(BBL_JSON_KEY_FORCE_UPDATE) != key_values.end())
-                    force_update = (key_values[BBL_JSON_KEY_FORCE_UPDATE] == "1")?true:false;
-                auto config_version = Semver::parse(key_values[BBL_JSON_KEY_VERSION]);
-                if (config_version)
-                    cache_ver = *config_version;
+		const std::string vendor_name = path.stem().string();
+		auto print_in_cache = (cache_profile_path / vendor_name / PRESET_PRINT_NAME);
+		auto filament_in_cache = (cache_profile_path / vendor_name / PRESET_FILAMENT_NAME);
+		auto machine_in_cache = (cache_profile_path / vendor_name / PRESET_PRINTER_NAME);
 
-                std::string changelog;
-                std::string changelog_file = (cache_profile_path / (vendor_name + ".changelog")).string();
-                boost::nowide::ifstream ifs(changelog_file);
-                if (ifs) {
-                    std::ostringstream oss;
-                    oss<< ifs.rdbuf();
-                    changelog = oss.str();
-                    ifs.close();
-                }
+		// Orca (PR #130): a JSON cache entry is only meaningful next to a non-empty
+		// <vendor>/ preset directory; a stray or half-downloaded <vendor>.json is
+		// skipped. An .opc cache is a single self-contained file (validated below),
+		// so this check does not apply to it.
+		if (!is_opc_file) {
+			const auto vendor_folder_in_cache = cache_profile_path / vendor_name;
+			if (!fs::is_regular_file(path) || !fs::is_directory(vendor_folder_in_cache) ||
+			    fs::is_empty(vendor_folder_in_cache)) {
+				BOOST_LOG_TRIVIAL(warning) << "[Orca Updater]:ignoring invalid cached update for "
+				                           << vendor_name << ": expected " << vendor_name
+				                           << ".json and a non-empty " << vendor_name << " directory";
+				continue;
+			}
+		}
 
-                if (vendor_ver < cache_ver) {
-                    BOOST_LOG_TRIVIAL(info) << "[Orca Updater]:need to update settings from " << vendor_ver.to_string()
-                                            << " to newer version " << cache_ver.to_string() << ", app version " << SLIC3R_VERSION;
-                    Version version;
-                    version.config_version = cache_ver;
-                    version.comment        = description;
-                    // Orca: update vendor.json
-                    updates.updates.emplace_back(std::move(file_path), path_in_vendor.string(), std::move(version), vendor_name, changelog, "", force_update, false);
-                    //Orca: update vendor folder
-                    updates.updates.emplace_back(cache_profile_path / vendor_name, vendor_path / vendor_name, Version(), vendor_name, "", "", force_update, true);
-                } else {
-                    BOOST_LOG_TRIVIAL(info) << "[Orca Updater]:cached settings for " << vendor_name
-                                            << " are not newer than installed version, installed " << vendor_ver.to_string()
-                                            << ", cached " << cache_ver.to_string();
-                }
-            }
-        }
-    }
+		if (is_vendor_installed(vendor_name)
+			|| is_opc_file
+			|| fs::exists(print_in_cache)
+			|| fs::exists(filament_in_cache)
+			|| fs::exists(machine_in_cache)) {
+			// Orca: a vendor installed as a preset cache carries its version there.
+			Semver vendor_ver = installed_vendor_version(vendor_name);
+
+			Semver cache_ver;
+			std::string description;
+			bool force_update = false;
+			if (is_opc_file) {
+				cache_ver = VendorCacheFile::usable_version(file_path, vendor_name);
+				if (!cache_ver.valid()) {
+					BOOST_LOG_TRIVIAL(warning) << "[Orca Updater]:ignoring unreadable vendor cache " << file_path;
+					continue;
+				}
+			}
+			else {
+				std::map<std::string, std::string> key_values;
+				std::vector<std::string> keys(3);
+				keys[0] = BBL_JSON_KEY_VERSION;
+				keys[1] = BBL_JSON_KEY_DESCRIPTION;
+				keys[2] = BBL_JSON_KEY_FORCE_UPDATE;
+				get_values_from_json(file_path, keys, key_values);
+				description = key_values[BBL_JSON_KEY_DESCRIPTION];
+				if (key_values.find(BBL_JSON_KEY_FORCE_UPDATE) != key_values.end())
+					force_update = (key_values[BBL_JSON_KEY_FORCE_UPDATE] == "1")?true:false;
+				auto config_version = Semver::parse(key_values[BBL_JSON_KEY_VERSION]);
+				if (config_version)
+					cache_ver = *config_version;
+			}
+
+			// Orca (PR #130): changelog for this vendor was captured in memory at sync time.
+			const auto changelog_it = changelogs.find(vendor_name);
+			std::string changelog = changelog_it != changelogs.end() ? changelog_it->second : std::string();
+
+			if (vendor_ver < cache_ver) {
+				BOOST_LOG_TRIVIAL(info) << "[Orca Updater]:need to update settings from " << vendor_ver.to_string()
+				                        << " to newer version " << cache_ver.to_string() << ", app version " << SLIC3R_VERSION;
+				Version version;
+				version.config_version = cache_ver;
+				version.comment        = description;
+				if (is_opc_file) {
+					// A cache contains the vendor profile and all presets.
+					// Install it directly; Update::install removes any
+					// superseded JSON representation.
+					auto &update = updates.updates.emplace_back(
+					    std::move(file_path), vendor_path / (vendor_name + ".opc"),
+					    std::move(version), vendor_name, changelog, "", force_update, false);
+					update.is_opc = true;
+				}
+				else {
+					// JSON profile and its preset directory are installed
+					// separately, as before.
+					updates.updates.emplace_back(std::move(file_path),
+					    vendor_path / (vendor_name + ".json"), std::move(version),
+					    vendor_name, changelog, "", force_update, false);
+					updates.updates.emplace_back(cache_profile_path / vendor_name,
+					    vendor_path / vendor_name, Version(), vendor_name,
+					    "", "", force_update, true);
+				}
+			} else {
+				BOOST_LOG_TRIVIAL(info) << "[Orca Updater]:cached settings for " << vendor_name
+				                        << " are not newer than installed version, installed " << vendor_ver.to_string()
+				                        << ", cached " << cache_ver.to_string();
+			}
+		}
+	}
 
 	return updates;
 }
@@ -1317,6 +1410,9 @@ void PresetUpdater::sync(std::string http_url, std::string language, std::string
 			// after the startup printer preset has been restored.
             this->p->sync_plugins(http_url, plugin_version);
             this->p->sync_printer_config(http_url);
+            // Orca (PR #130): the filament library is always installed, so refresh it
+            // from the updater on every startup sync rather than deferring to check_vendor_update().
+            this->p->sync_vendor_config(PresetBundle::ORCA_FILAMENT_LIBRARY);
 			//if (p->cancel)
 			//	return;
 			//remove the tooltip currently
@@ -1349,6 +1445,302 @@ void PresetUpdater::check_vendor_update(const std::string& vendor_id)
     });
 }
 
+// Orca: ask the server which vendors from `system_vendors` have a profile bundle available that
+// isn't installed yet (or is newer than what's installed). Request body maps vendor id -> currently
+// installed profile version (unknown/not-yet-installed vendors report "0.0.0"). Response maps
+// vendor id -> {version, download_url, changelog} for each vendor the server has an update for.
+// Any such vendor is downloaded and cached under ota/profiles the same way sync_vendor_config()
+// does; the caller's check_config_updates_from_updater() -> get_config_updates()/perform_updates()
+// flow then installs the cached profiles into data_dir()/system.
+//
+// Mirrors check_vendor_update()/sync_vendor_config(): the network query and the download/extract
+// work run on a background thread (vendor_check_threads), never on the calling (UI) thread. Only
+// the confirmation dialog (which must run on the UI thread) and the final callback are marshaled
+// back via CallAfter().
+void PresetUpdater::priv::check_new_vendors(const std::set<std::string>& system_vendors,
+                                             std::function<void(std::vector<std::string>, bool)> callback)
+{
+    vendor_check_threads.emplace_back([this, system_vendors, callback]() {
+        AppConfig* app_config = GUI::wxGetApp().app_config;
+        std::string url       = app_config->profile_update_url() + "/new?orcaslicer_version=" + Http::url_encode(SoftFever_VERSION);
+
+        auto check_cancel = [this](Http::Progress, bool& cancel_http) {
+            if (cancel || vendor_check_cancel)
+                cancel_http = true;
+        };
+
+        json request_body = json::object();
+        BOOST_LOG_TRIVIAL(info) << "[Orca Updater] checking new vendors for:";
+        for (const auto& vendor_id : system_vendors) {
+            // Orca: installed_vendor_version() reads whichever form the vendor is
+            // installed as - the .json profile or the .opc preset cache stamp -
+            // so a cache-only vendor is not reported as version 0.0.0 and then
+            // endlessly re-offered by the server.
+            Semver installed_ver = installed_vendor_version(vendor_id);
+            request_body[vendor_id] = installed_ver.to_string();
+            BOOST_LOG_TRIVIAL(info) << vendor_id << " (installed version " << installed_ver.to_string() << ")";
+        }
+        BOOST_LOG_TRIVIAL(info) << "[Orca Updater] new vendor check request url: " << url;
+        BOOST_LOG_TRIVIAL(info) << "[Orca Updater] new vendor check request body: " << request_body.dump(2);
+
+        json response_json;
+        bool got_response = false;
+
+        auto post = Http::post(url);
+
+        post.timeout_connect(5);
+        post.on_progress(check_cancel);
+        post.header("Content-Type", "application/json");
+        post.on_error([](std::string body, std::string error, unsigned http_status) {
+                BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] new vendor check HTTP error: " << error;
+            })
+            .on_complete([&response_json, &got_response](std::string body, unsigned http_status) {
+                if (http_status != 200)
+                    return;
+                try {
+                    json j = json::parse(body);
+                    if (j.is_object()) {
+                        response_json = std::move(j);
+                        got_response  = true;
+                    }
+                } catch (const std::exception& e) {
+                    BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] new vendor check JSON parse failed: " << e.what();
+                }
+            });
+
+        post.set_post_body(request_body.dump());
+        post.perform_sync();
+
+        if (cancel || vendor_check_cancel)
+            return;
+
+        if (!got_response) {
+            GUI::wxGetApp().CallAfter([callback]() { callback({}, false); });
+            return;
+        }
+
+        // Collect candidates before touching the filesystem or network again.
+        struct NewVendorCandidate
+        {
+            std::string vendor_id;
+            Semver      version;
+            std::string download_url;
+            std::string changelog;
+        };
+        std::vector<NewVendorCandidate> candidates;
+        for (auto it = response_json.begin(); it != response_json.end(); ++it) {
+            const json& entry = it.value();
+            if (!entry.is_object())
+                continue;
+            std::string download_url_str = entry.value("download_url", std::string());
+            if (download_url_str.empty())
+                continue;
+
+            NewVendorCandidate candidate;
+            candidate.vendor_id     = it.key();
+            auto parsed_ver         = Semver::parse(entry.value("version", std::string()));
+            candidate.version       = parsed_ver ? *parsed_ver : Semver();
+            candidate.download_url  = std::move(download_url_str);
+            candidate.changelog     = entry.value("changelog", std::string());
+            candidates.push_back(std::move(candidate));
+        }
+
+        if (candidates.empty()) {
+            GUI::wxGetApp().CallAfter([callback]() { callback({}, false); });
+            return;
+        }
+
+        // Orca: the confirmation dialog must run on the UI thread; if confirmed, the actual
+        // download/install work is dispatched back onto a new background thread from there,
+        // same as check_vendor_update() does for a single vendor.
+        GUI::wxGetApp().CallAfter([this, candidates, callback]() {
+            std::vector<GUI::MsgUpdateConfig::Update> updates_msg;
+            for (const auto& candidate : candidates)
+                updates_msg.emplace_back(candidate.vendor_id, candidate.version, std::string(), candidate.changelog);
+
+            GUI::MsgUpdateConfig dlg(updates_msg);
+            if (dlg.ShowModal() != wxID_OK) {
+                BOOST_LOG_TRIVIAL(info) << "[Orca Updater] user declined installing new vendors";
+                callback({}, true);
+                return;
+            }
+
+            // Orca: the actual download runs on a background thread below (so it doesn't block the
+            // UI), but that also means nothing visibly happens for the several seconds it can take
+            // (longer still if a retry kicks in) — push a notification so it's clear work is
+            // ongoing rather than looking hung.
+            {
+                std::string vendor_list;
+                for (const auto& candidate : candidates) {
+                    if (!vendor_list.empty())
+                        vendor_list += ", ";
+                    vendor_list += candidate.vendor_id;
+                }
+                GUI::wxGetApp().plater()->get_notification_manager()->push_notification(
+                    _u8L("Downloading new vendor profile(s): ") + vendor_list + _u8L("..."));
+            }
+
+            vendor_check_threads.emplace_back([this, candidates, callback]() {
+                auto check_cancel = [this](Http::Progress, bool& cancel_http) {
+                    if (cancel || vendor_check_cancel)
+                        cancel_http = true;
+                };
+
+                std::vector<std::string> new_vendor_ids;
+                std::vector<std::string> failed_vendor_ids;
+                auto                     cache_profile_path = cache_path / "profiles";
+                fs::create_directories(cache_profile_path);
+                boost::system::error_code ec;
+
+                for (const auto& candidate : candidates) {
+                    if (cancel || vendor_check_cancel)
+                        break;
+
+                    const std::string& vendor_id        = candidate.vendor_id;
+                    const std::string& download_url_str = candidate.download_url;
+                    std::string        changelog         = candidate.changelog;
+
+                    BOOST_LOG_TRIVIAL(info) << "[Orca Updater] downloading new vendor " << vendor_id << " version " << candidate.version.to_string();
+
+                    // Clear only this vendor's cached data, same as sync_vendor_config().
+                    fs::remove_all(cache_profile_path / vendor_id, ec);
+                    fs::remove(cache_profile_path / (vendor_id + ".json"), ec);
+
+                    fs::path download_file = cache_path / (vendor_id + TMP_EXTENSION);
+                    bool     download_ok   = false;
+
+                    // Orca: same retry pattern as Plater.cpp's project download — a single-shot
+                    // 5s connect timeout against GitHub's redirect chain is prone to transient
+                    // failures (DNS/connect hiccups) that succeed a moment later, so retry a few
+                    // times before giving up rather than failing the whole vendor on one blip.
+                    int        retry_count = 0;
+                    const int  max_retries = 3;
+                    bool       keep_trying = true;
+                    while (keep_trying && retry_count < max_retries) {
+                        retry_count++;
+                        Http::get(download_url_str)
+                            .timeout_connect(5)
+                            .on_progress(check_cancel)
+                            .on_error([&vendor_id, &retry_count](std::string body, std::string error, unsigned http_status) {
+                                BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] download failed for new vendor " << vendor_id
+                                                           << " (attempt " << retry_count << "/" << max_retries << "): " << error;
+                            })
+                            .on_complete([&](std::string body, unsigned http_status) {
+                                if (http_status != 200)
+                                    return;
+                                fs::fstream file(download_file, std::ios::out | std::ios::binary | std::ios::trunc);
+                                if (!file.good())
+                                    return;
+                                file.write(body.c_str(), body.size());
+                                file.close();
+                                if (file.good())
+                                    download_ok = true;
+                            })
+                            .perform_sync();
+
+                        keep_trying = !download_ok && !(cancel || vendor_check_cancel);
+                    }
+
+                    if (!download_ok || cancel || vendor_check_cancel) {
+                        if (!download_ok)
+                            failed_vendor_ids.push_back(vendor_id);
+                        continue;
+                    }
+
+                    BOOST_LOG_TRIVIAL(info) << "[Orca Updater] extracting new vendor " << vendor_id;
+                    if (!extract_file(download_file, cache_profile_path)) {
+                        BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] extraction failed for new vendor " << vendor_id;
+                        fs::remove(download_file, ec);
+                        failed_vendor_ids.push_back(vendor_id);
+                        continue;
+                    }
+                    fs::remove(download_file, ec);
+
+                    const fs::path cached_vendor_json   = cache_profile_path / (vendor_id + ".json");
+                    const fs::path cached_vendor_folder = cache_profile_path / vendor_id;
+                    if (!fs::is_regular_file(cached_vendor_json) || !fs::is_directory(cached_vendor_folder) ||
+                        fs::is_empty(cached_vendor_folder)) {
+                        BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] rejected new vendor " << vendor_id << ": expected " << vendor_id
+                                                   << ".json and a non-empty " << vendor_id << " directory";
+                        fs::remove_all(cached_vendor_folder, ec);
+                        fs::remove(cached_vendor_json, ec);
+                        failed_vendor_ids.push_back(vendor_id);
+                        continue;
+                    }
+
+                    {
+                        std::lock_guard<std::mutex> lock(vendor_changelogs_mutex);
+                        vendor_changelogs[vendor_id] = std::move(changelog);
+                    }
+
+                    new_vendor_ids.push_back(vendor_id);
+                }
+
+                if (!new_vendor_ids.empty()) {
+                    // Orca: the user already confirmed via the dialog above, so install right away
+                    // instead of routing through check_config_updates_from_updater(), which only
+                    // queues a passive notification (meant for the silent background per-vendor
+                    // check) requiring yet another click + confirmation before anything is copied
+                    // into data_dir()/system.
+                    GUI::wxGetApp().CallAfter([this, new_vendor_ids] {
+                        AppConfig* app_config = GUI::wxGetApp().app_config;
+                        Updates    updates    = get_config_updates(app_config->orig_version());
+
+                        // Only install the vendors just confirmed; leave any other unrelated
+                        // pending cached update (from a background sync_vendor_config()) alone,
+                        // still gated behind its own notification/confirmation.
+                        std::set<std::string> confirmed(new_vendor_ids.begin(), new_vendor_ids.end());
+                        Updates                filtered;
+                        for (auto& update : updates.updates)
+                            if (confirmed.count(update.vendor))
+                                filtered.updates.push_back(std::move(update));
+
+                        if (filtered.updates.empty()) {
+                            BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] new vendors cached but no updates detected";
+                            return;
+                        }
+
+                        if (!perform_updates(std::move(filtered)) || !reload_configs_update_gui()) {
+                            BOOST_LOG_TRIVIAL(warning) << "[Orca Updater] failed to install new vendors";
+                            return;
+                        }
+
+                        BOOST_LOG_TRIVIAL(info) << "[Orca Updater] new vendors installed";
+                        for (const auto& vendor_id : new_vendor_ids) {
+                            Semver cur_ver = GUI::wxGetApp().preset_bundle->get_vendor_profile_version(vendor_id);
+                            GUI::wxGetApp().plater()->get_notification_manager()->push_notification(
+                                GUI::NotificationType::PresetUpdateFinished,
+                                GUI::NotificationManager::NotificationLevel::ImportantNotificationLevel,
+                                Slic3r::format(_u8L("Configuration package: %1% updated to %2%"), vendor_id, cur_ver.to_string()));
+                        }
+                    });
+                }
+
+                if (!failed_vendor_ids.empty()) {
+                    GUI::wxGetApp().CallAfter([failed_vendor_ids] {
+                        std::string vendor_list;
+                        for (const auto& vendor_id : failed_vendor_ids) {
+                            if (!vendor_list.empty())
+                                vendor_list += ", ";
+                            vendor_list += vendor_id;
+                        }
+                        GUI::wxGetApp().plater()->get_notification_manager()->push_notification(
+                            _u8L("Failed to download vendor profile(s): ") + vendor_list);
+                    });
+                }
+
+                GUI::wxGetApp().CallAfter([callback, new_vendor_ids]() { callback(new_vendor_ids, false); });
+            });
+        });
+    });
+}
+
+void PresetUpdater::check_new_vendors(const std::set<std::string>& system_vendors,
+                                       std::function<void(std::vector<std::string>, bool)> callback)
+{
+    p->check_new_vendors(system_vendors, std::move(callback));
+}
+
 void PresetUpdater::slic3r_update_notify()
 {
 	if (! p->enabled_version_check)
@@ -1370,10 +1762,9 @@ static bool reload_configs_update_gui()
 	GUI::wxGetApp().load_current_presets();
 	GUI::wxGetApp().plater()->set_bed_shape();
 
-	return true;
+    return true;
 }
 
-
 PresetUpdater::UpdateResult PresetUpdater::config_update(const Semver& old_slic3r_version, UpdateParams params) const
 {
     if (! p->enabled_config_update) { return R_NOOP; }
@@ -1415,7 +1806,7 @@ PresetUpdater::UpdateResult PresetUpdater::config_update(const Semver& old_slic3
                 ->get_notification_manager()
                 ->push_notification(GUI::NotificationType::PresetUpdateFinished,
                                     GUI::NotificationManager::NotificationLevel::ImportantNotificationLevel,
-                                    _u8L("Configuration package: ") + b + _u8L(" updated to ") + cur_ver.to_string());
+                                    Slic3r::format(_u8L("Configuration package: %1% updated to %2%"), b, cur_ver.to_string()));
             }
             return R_UPDATE_INSTALLED;
         }
diff --git a/src/slic3r/Utils/PresetUpdater.hpp b/src/slic3r/Utils/PresetUpdater.hpp
index 27ec6748f2..ccb0902fd5 100644
--- a/src/slic3r/Utils/PresetUpdater.hpp
+++ b/src/slic3r/Utils/PresetUpdater.hpp
@@ -1,7 +1,9 @@
 #ifndef slic3r_PresetUpdate_hpp_
 #define slic3r_PresetUpdate_hpp_
 
+#include <functional>
 #include <memory>
+#include <set>
 #include <vector>
 
 #include <wx/event.h>
@@ -59,6 +61,12 @@ public:
 	void on_update_notification_confirm();
     void do_printer_config_update();
 	void check_vendor_update(const std::string& vendor_id);
+	// Orca: async, mirrors check_vendor_update()/sync_vendor_config() — the network query and any
+	// download/install work happen on a background thread; only the confirmation dialog runs on
+	// the UI thread. `callback` is invoked on the UI thread with the ids of vendors that were
+	// installed (empty if none were found, or the user declined) and whether the user declined.
+	void check_new_vendors(const std::set<std::string>& system_vendors,
+	                        std::function<void(std::vector<std::string> installed_vendors, bool declined)> callback);
 
 	bool version_check_enabled() const;
 
diff --git a/src/slic3r/Utils/Process.cpp b/src/slic3r/Utils/Process.cpp
index 518462bbc9..96da521114 100644
--- a/src/slic3r/Utils/Process.cpp
+++ b/src/slic3r/Utils/Process.cpp
@@ -21,6 +21,7 @@
     #include <boost/process/args.hpp>
 #endif
 
+#include <wx/filename.h>
 #include <wx/stdpaths.h>
 
 namespace Slic3r {
diff --git a/src/slic3r/Utils/QidiPrinterAgent.cpp b/src/slic3r/Utils/QidiPrinterAgent.cpp
index 6b05480194..1f437853ba 100644
--- a/src/slic3r/Utils/QidiPrinterAgent.cpp
+++ b/src/slic3r/Utils/QidiPrinterAgent.cpp
@@ -9,6 +9,8 @@
 #include <cctype>
 #include <sstream>
 
+using json = nlohmann::json;
+
 namespace Slic3r {
 
 namespace {
diff --git a/src/slic3r/Utils/Serial.cpp b/src/slic3r/Utils/Serial.cpp
index 4db1acc6b6..f8c03ceb26 100644
--- a/src/slic3r/Utils/Serial.cpp
+++ b/src/slic3r/Utils/Serial.cpp
@@ -331,7 +331,9 @@ void Serial::set_baud_rate(unsigned baud_rate)
 			speed_t c_ispeed;
 			speed_t c_ospeed;
 		};
+#ifndef BOTHER
 #define BOTHER CBAUDEX
+#endif
 
 		termios2 ios;
 		handle_errno(::ioctl(handle, TCGETS2, &ios));
diff --git a/src/slic3r/Utils/SnapmakerPrinterAgent.cpp b/src/slic3r/Utils/SnapmakerPrinterAgent.cpp
index 9b9a6809fd..5783738af7 100644
--- a/src/slic3r/Utils/SnapmakerPrinterAgent.cpp
+++ b/src/slic3r/Utils/SnapmakerPrinterAgent.cpp
@@ -6,6 +6,8 @@
 #include "nlohmann/json.hpp"
 #include <boost/log/trivial.hpp>
 
+using json = nlohmann::json;
+
 namespace Slic3r {
 
 namespace {
@@ -39,7 +41,7 @@ std::string find_closest_color_preset_by_vendor_and_type(const PresetCollection&
             std::string  p_color = p.config.opt_string("default_filament_colour", 0u);
             unsigned int p_color_value;
             if (!p_color.empty()) {
-                unsigned int hash_pos = p_color.find("#");
+                size_t       hash_pos = p_color.find("#");
                 p_color_value         = std::stoul(p_color.substr(hash_pos != std::string::npos ? hash_pos + 1 : 0), nullptr, 16);
             } else {
                 // Default to black if no color specified in profile. Assume other profiles might be a closer color match.
diff --git a/src/slic3r/plugin/PluginResolver.cpp b/src/slic3r/plugin/PluginResolver.cpp
index 4ba58ee550..6e72929c63 100644
--- a/src/slic3r/plugin/PluginResolver.cpp
+++ b/src/slic3r/plugin/PluginResolver.cpp
@@ -3,6 +3,7 @@
 #include "PluginManager.hpp"
 #include "../Utils/Http.hpp"
 #include "../Utils/OrcaCloudServiceAgent.hpp"
+#include "../Utils/NetworkAgent.hpp"
 #include "../GUI/GUI.hpp"
 #include "../GUI/GUI_App.hpp"
 #include "../GUI/I18N.hpp"
diff --git a/src/slic3r/plugin/host/PluginHostUi.cpp b/src/slic3r/plugin/host/PluginHostUi.cpp
index c098ea3224..8fc3f12877 100644
--- a/src/slic3r/plugin/host/PluginHostUi.cpp
+++ b/src/slic3r/plugin/host/PluginHostUi.cpp
@@ -9,6 +9,7 @@
 #include <slic3r/GUI/MsgDialog.hpp>
 #include <slic3r/GUI/PluginProgressDialog.hpp>
 #include <slic3r/GUI/PluginWebDialog.hpp>
+#include <slic3r/GUI/NotificationManager.hpp>
 
 #include <nlohmann/json.hpp>
 #include <pybind11/pybind11.h>
@@ -19,6 +20,7 @@
 #include <wx/defs.h>
 #include <wx/window.h>
 
+#include <atomic>
 #include <cstdint>
 #include <future>
 #include <memory>
@@ -44,16 +46,20 @@ namespace {
 struct GilSafeCallable
 {
     py::object fn;
+    std::atomic_bool active{true};
     explicit GilSafeCallable(py::object f) : fn(std::move(f)) {}
+    void disable()
+    {
+        active.store(false, std::memory_order_release);
+        PythonGILState gil;
+        if (gil)
+            fn = py::object();
+        else
+            (void) fn.release();
+    }
     ~GilSafeCallable()
     {
-        if (fn) {
-            PythonGILState gil;
-            if (gil)
-                fn = py::object();
-            else
-                (void) fn.release();
-        }
+        disable();
     }
 };
 using CallablePtr = std::shared_ptr<GilSafeCallable>;
@@ -166,11 +172,34 @@ public:
         }
         return out;
     }
+    void bind_callback(const CallablePtr& callback, const std::string& plugin_key)
+    {
+        if (!callback)
+            return;
+        std::lock_guard<std::mutex> lk(m_mtx);
+        m_callbacks[plugin_key].push_back(callback);
+    }
+    std::vector<CallablePtr> take_callbacks_for_plugin(const std::string& plugin_key)
+    {
+        std::lock_guard<std::mutex> lk(m_mtx);
+        auto                        it = m_callbacks.find(plugin_key);
+        if (it == m_callbacks.end())
+            return {};
+        std::vector<CallablePtr> callbacks;
+        callbacks.reserve(it->second.size());
+        for (const std::weak_ptr<GilSafeCallable>& weak_callback : it->second) {
+            if (auto callback = weak_callback.lock())
+                callbacks.push_back(std::move(callback));
+        }
+        m_callbacks.erase(it);
+        return callbacks;
+    }
 
 private:
     std::mutex                           m_mtx;
     std::unordered_map<int, wxWindow*>   m_resources;
     std::unordered_map<int, std::string> m_owners;
+    std::unordered_map<std::string, std::vector<std::weak_ptr<GilSafeCallable>>> m_callbacks;
     int                                  m_next_id{1};
 };
 
@@ -448,6 +477,46 @@ void progress_close(int id)
     });
 }
 
+void plater_notification(NotificationManager::NotificationLevel notification_level, const std::string& text,
+                         const std::string& hypertext, py::object on_click)
+{
+    const std::string plugin_key = PluginAuditManager::instance().current_plugin();
+    CallablePtr        holder    = make_holder(std::move(on_click));
+    if (holder)
+        UiRegistry::instance().bind_callback(holder, plugin_key);
+
+    std::function<bool(wxEvtHandler*)> callback;
+    if (holder) {
+        callback = [holder](wxEvtHandler*) -> bool {
+            if (!holder->active.load(std::memory_order_acquire))
+                return false;
+
+            PythonGILState gil;
+            if (!gil)
+                return false;
+            try {
+                py::object result = holder->fn();
+                return result.is_none() || result.cast<bool>();
+            } catch (py::error_already_set& e) {
+                BOOST_LOG_TRIVIAL(error) << "orca.host.ui notification callback raised: " << e.what();
+                PyErr_Clear();
+                return false;
+            } catch (const std::exception& e) {
+                BOOST_LOG_TRIVIAL(error) << "orca.host.ui notification callback raised: " << e.what();
+                return false;
+            } catch (...) {
+                BOOST_LOG_TRIVIAL(error) << "orca.host.ui notification callback raised an unknown exception";
+                return false;
+            }
+        };
+    }
+
+    run_on_ui_blocking([notification_level, text, hypertext, callback = std::move(callback)]() mutable {
+        wxGetApp().plater()->get_notification_manager()->push_notification(NotificationType::CustomNotification, notification_level, text,
+                                                                           hypertext, std::move(callback));
+    });
+}
+
 } // namespace
 
 void PluginHostUi::RegisterBindings(pybind11::module_& host)
@@ -530,6 +599,23 @@ void PluginHostUi::RegisterBindings(pybind11::module_& host)
     ui.def("create_progress_dialog", &ui_create_progress_dialog, py::arg("title"), py::arg("message"),
            py::arg("maximum") = 100, py::arg("style") = wxPD_APP_MODAL | wxPD_AUTO_HIDE,
            "Create a native progress dialog and return a ProgressDialog handle.");
+
+    py::enum_<NotificationManager::NotificationLevel>(ui, "NotificationLevel")
+        .value("ProgressBarNotificationLevel", NotificationManager::NotificationLevel::ProgressBarNotificationLevel)
+        .value("HintNotificationLevel", NotificationManager::NotificationLevel::HintNotificationLevel)
+        .value("RegularNotificationLevel", NotificationManager::NotificationLevel::RegularNotificationLevel)
+        .value("PrintInfoNotificationLevel", NotificationManager::NotificationLevel::PrintInfoNotificationLevel)
+        .value("PrintInfoShortNotificationLevel", NotificationManager::NotificationLevel::PrintInfoShortNotificationLevel)
+        .value("ImportantNotificationLevel", NotificationManager::NotificationLevel::ImportantNotificationLevel)
+        .value("WarningNotificationLevel", NotificationManager::NotificationLevel::WarningNotificationLevel)
+        .value("SeriousWarningNotificationLevel", NotificationManager::NotificationLevel::SeriousWarningNotificationLevel)
+        .value("ErrorNotificationLevel", NotificationManager::NotificationLevel::ErrorNotificationLevel)
+        .export_values();
+
+    ui.def("push_notification", &plater_notification, py::arg("notification_level"), py::arg("text"),
+           py::arg("hyper_text") = "", py::arg("on_click") = py::none(),
+           "Push a plater notification. hyper_text is an underlined label; on_click() is called when it is clicked "
+           "and may return True to close the notification.");
 }
 
 void PluginHostUi::close_windows_for_plugin(const std::string& plugin_key)
@@ -538,6 +624,9 @@ void PluginHostUi::close_windows_for_plugin(const std::string& plugin_key)
         return;
 
     auto teardown = [plugin_key]() {
+        for (auto& callback : UiRegistry::instance().take_callbacks_for_plugin(plugin_key))
+            callback->disable();
+
         // Destroy() bypasses wxEVT_CLOSE, so the plugin's on_close is not fired on
         // forced teardown (intended); the resource destructor still cleans the registry.
         for (auto* window : UiRegistry::instance().take_for_plugin(plugin_key)) {
diff --git a/tests/AGENTS.md b/tests/AGENTS.md
index c62a1d12ec..e6f3bf864c 100644
--- a/tests/AGENTS.md
+++ b/tests/AGENTS.md
@@ -10,16 +10,17 @@ Rules for writing tests under `tests/`. [CATCH2.md](CATCH2.md) is the Catch2 ref
 - `libnest2d`: 2D nesting and packing.
 - `slic3rutils`: the Python plugin system and its slicing-pipeline bindings.
 - `filament_group`: filament-to-extruder grouping, checked against golden files.
+- `cli`: end-to-end runs of the built `orca-slicer` binary, Linux only. These tests carry the `RequiresApp` label, which the CI unit-test job excludes because it receives only `build/tests`; run them with `ctest --test-dir build/tests -C Release -L RequiresApp`.
 
 ## Building and running
 
 Tests are off by default, so the build has to be told to include them.
 
-- Windows: `build_release_vs.bat tests`, then `ctest --test-dir build/tests -C Release`
+- Windows: `build_win.bat -ds --run-tests`, which builds the dependencies and the tests and runs them (`-l -x` for the clang-cl and Ninja build CI uses)
 - macOS: `./build_release_macos.sh -s -a arm64 -T`, which builds and runs them
-- Linux: `./build_linux.sh -t`, then `ctest --test-dir build/tests`
+- Linux: `./build_linux.sh -t`, then `ctest --test-dir build/tests -C Release`
 
-Rebuild a single suite with `cmake --build build --config Release --target <suite>_tests`. Visual Studio and Xcode are multi-configuration generators, so `ctest` needs `-C` there; on Linux it does not.
+Rebuild a single suite with `cmake --build build --config Release --target <suite>_tests`. Visual Studio, Xcode and the Ninja Multi-Config generator that `build_linux.sh` uses are all multi-configuration, so `ctest` needs `-C` on every platform; without it, tests registered with plain `add_test()` lose their labels and report "Not Run".
 
 ## Where a test goes
 
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index c403152c4e..f79a3c54c2 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -85,4 +85,9 @@ add_subdirectory(fff_print)
 add_subdirectory(sla_print)
 add_subdirectory(filament_group)
 
+# End-to-end checks of the orca-slicer binary. Linux only: they read result.json, which the CLI
+# writes on Linux only. src/ is added before tests/, so the target is known here.
+if (UNIX AND NOT APPLE AND TARGET OrcaSlicer)
+    add_subdirectory(cli)
+endif ()
 
diff --git a/tests/cli/CMakeLists.txt b/tests/cli/CMakeLists.txt
new file mode 100644
index 0000000000..6707159fb2
--- /dev/null
+++ b/tests/cli/CMakeLists.txt
@@ -0,0 +1,17 @@
+# Runs the real orca-slicer binary, so it needs the built app and resources/, not just build/tests.
+# The CI unit-test job only receives build/tests, so the test carries the RequiresApp label that
+# scripts/run_unit_tests.sh excludes. Run it with `ctest -C Release -L RequiresApp`. It also exits 77
+# (skipped) when the binary is missing.
+
+find_program(ORCA_CLI_TEST_PYTHON NAMES python3)
+if (NOT ORCA_CLI_TEST_PYTHON)
+    message(STATUS "python3 not found, not registering the CLI tests")
+    return()
+endif ()
+
+add_test(NAME cli_strict_mode
+    COMMAND bash ${CMAKE_CURRENT_SOURCE_DIR}/test_cli_strict.sh $<TARGET_FILE:OrcaSlicer> ${ORCA_CLI_TEST_PYTHON})
+set_tests_properties(cli_strict_mode PROPERTIES
+    LABELS "CLI;RequiresApp"
+    SKIP_RETURN_CODE 77
+    TIMEOUT 900)
diff --git a/tests/cli/test_cli_strict.sh b/tests/cli/test_cli_strict.sh
new file mode 100644
index 0000000000..6051511f23
--- /dev/null
+++ b/tests/cli/test_cli_strict.sh
@@ -0,0 +1,153 @@
+#!/usr/bin/env bash
+# End-to-end check of the CLI --strict option against the real orca-slicer binary.
+#
+# A model with a large unsupported overhang, sliced with support off, raises the NON_CRITICAL
+# "support needed" slicing warning. The CLI lists it in result.json's "warnings" array, and with
+# --strict it also fails the run with CLI_SLICING_ERROR. --strict with --no-check is rejected up
+# front, because --no-check skips that check.
+#
+# usage: test_cli_strict.sh <orca-slicer binary> <python3>
+set -u
+
+BIN="${1:-}"
+PY="${2:-python3}"
+# 77 is the test's SKIP_RETURN_CODE.
+[ -x "$BIN" ] || { echo "SKIP: orca-slicer binary not found: $BIN"; exit 77; }
+
+# From src/libslic3r/Utils.hpp. main() returns them, so the shell sees them modulo 256.
+CLI_SUCCESS=0
+CLI_INVALID_PARAMS=-2
+CLI_SLICING_ERROR=-100
+
+WORK="$(mktemp -d "${TMPDIR:-/tmp}/orca-cli-strict.XXXXXX")"
+trap 'rm -rf "$WORK"' EXIT
+mkdir -p "$WORK/datadir"
+
+# Standalone presets: without "inherits" the CLI loads them as-is, with no preset bundle.
+cat > "$WORK/machine.json" <<'EOF'
+{
+    "type": "machine",
+    "from": "User",
+    "name": "CLI strict test printer",
+    "printable_area": ["0x0", "200x0", "200x200", "0x200"],
+    "printable_height": "100",
+    "layer_change_gcode": "G92 E0"
+}
+EOF
+cat > "$WORK/process.json" <<'EOF'
+{
+    "type": "process",
+    "from": "User",
+    "name": "CLI strict test process",
+    "enable_support": "0",
+    "enforce_support_layers": "0"
+}
+EOF
+
+# A 40x40mm cap on an 8x8mm stem: the cap reaches ~22mm past the stem, beyond the 6mm
+# cantilever limit of PrintObject::is_support_necessary().
+"$PY" - "$WORK/capital.stl" <<'EOF'
+import sys
+
+def box(x0, y0, z0, x1, y1, z1):
+    v = [(x, y, z) for z in (z0, z1) for y in (y0, y1) for x in (x0, x1)]
+    # Faces wound counter-clockwise seen from outside: -z, +z, -y, +y, -x, +x.
+    for a, b, c, d in ((0, 2, 3, 1), (4, 5, 7, 6), (0, 1, 5, 4), (2, 6, 7, 3), (0, 4, 6, 2), (1, 3, 7, 5)):
+        yield v[a], v[b], v[c]
+        yield v[a], v[c], v[d]
+
+with open(sys.argv[1], "w") as f:
+    f.write("solid capital\n")
+    for tri in (*box(16, 16, 0, 24, 24, 13), *box(0, 0, 12, 40, 40, 14)):
+        f.write("facet normal 0 0 0\nouter loop\n")
+        for p in tri:
+            f.write("vertex %g %g %g\n" % p)
+        f.write("endloop\nendfacet\n")
+    f.write("endsolid capital\n")
+EOF
+
+fails=0
+fail() { echo "FAIL: $*"; fails=$((fails + 1)); }
+
+# run <tag> [option...]: slice into $WORK/<tag>, keeping the log and the shell status there.
+run() {
+    local out="$WORK/$1"; shift
+    mkdir -p "$out"
+    timeout 300 "$BIN" --datadir "$WORK/datadir" --load-settings "$WORK/machine.json;$WORK/process.json" \
+        "$@" --slice 0 --outputdir "$out" "$WORK/capital.stl" > "$out/log" 2>&1
+    echo $? > "$out/status"
+}
+
+# expect_status <tag> <cli code>
+expect_status() {
+    local got; got="$(cat "$WORK/$1/status")"
+    [ "$got" -eq $(( $2 & 255 )) ] || fail "$1: shell status $got, want $(( $2 & 255 )) (code $2)"
+}
+
+# expect_gcode <tag> yes|no
+expect_gcode() {
+    if compgen -G "$WORK/$1/*.gcode" > /dev/null; then
+        [ "$2" = yes ] || fail "$1: G-code was exported"
+    else
+        [ "$2" = no ] || fail "$1: no G-code was exported"
+    fi
+}
+
+# expect_result <tag> <return_code> <strict_mode true|false> <non-critical warning: some|none>
+expect_result() {
+    "$PY" - "$WORK/$1/result.json" "$2" "$3" "$4" <<'EOF' || fail "$1: result.json"
+import json, sys
+
+path, want_rc, want_strict, want_warning = sys.argv[1], int(sys.argv[2]), sys.argv[3] == "true", sys.argv[4]
+try:
+    with open(path) as f:
+        result = json.load(f)
+except (OSError, ValueError) as e:
+    sys.exit("cannot read %s: %s" % (path, e))
+
+errors = []
+if result.get("return_code") != want_rc:
+    errors.append("return_code %r, want %d" % (result.get("return_code"), want_rc))
+if result.get("strict_mode") is not want_strict:
+    errors.append("strict_mode %r, want %r" % (result.get("strict_mode"), want_strict))
+warnings = result.get("warnings")
+if not isinstance(warnings, list):
+    errors.append("warnings %r is not a list" % (warnings,))
+else:
+    found = any(isinstance(w, dict) and w.get("class") == "slicing_warning_non_critical" for w in warnings)
+    if found != (want_warning == "some"):
+        errors.append("warnings %r, want %s slicing_warning_non_critical" % (warnings, want_warning))
+for e in errors:
+    print(e)
+sys.exit(1 if errors else 0)
+EOF
+}
+
+echo "== without --strict the warning is listed and the slice succeeds"
+run plain
+expect_status plain $CLI_SUCCESS
+expect_result plain $CLI_SUCCESS false some
+expect_gcode plain yes
+
+echo "== --strict fails the run on the same warning, before G-code export"
+run strict --strict
+expect_status strict $CLI_SLICING_ERROR
+expect_result strict $CLI_SLICING_ERROR true some
+expect_gcode strict no
+
+echo "== --strict with --no-check is rejected before slicing"
+run conflict --strict --no-check
+expect_status conflict $CLI_INVALID_PARAMS
+expect_result conflict $CLI_INVALID_PARAMS true none
+expect_gcode conflict no
+grep -q -- "--strict cannot be combined with --no-check" "$WORK/conflict/log" \
+    || fail "conflict: error message missing"
+
+if [ "$fails" -ne 0 ]; then
+    for log in "$WORK"/*/log; do
+        echo "--- $log"
+        tail -n 40 "$log"
+    done
+    exit 1
+fi
+echo "PASS"
diff --git a/tests/fff_print/CMakeLists.txt b/tests/fff_print/CMakeLists.txt
index 3247bfda66..60e1721817 100644
--- a/tests/fff_print/CMakeLists.txt
+++ b/tests/fff_print/CMakeLists.txt
@@ -21,6 +21,7 @@ add_executable(${_TEST_NAME}_tests
 	test_support_material.cpp
 	test_tree_support.cpp
 	test_trianglemesh.cpp
+	test_wipe.cpp
 	test_wipe_tower.cpp
 	)
 target_link_libraries(${_TEST_NAME}_tests test_common libslic3r Catch2::Catch2WithMain)
diff --git a/tests/fff_print/test_fill.cpp b/tests/fff_print/test_fill.cpp
index 04e5b61831..a3696c47ad 100644
--- a/tests/fff_print/test_fill.cpp
+++ b/tests/fff_print/test_fill.cpp
@@ -9,11 +9,13 @@
 #include <vector>
 
 #include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/AABBTreeLines.hpp"
 #include "libslic3r/Fill/Fill.hpp"
 #include "libslic3r/Flow.hpp"
 #include "libslic3r/Geometry.hpp"
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/Print.hpp"
+#include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/SVG.hpp"
 #include "libslic3r/libslic3r.h"
 
@@ -675,6 +677,73 @@ TEST_CASE("Ironing follows the solid infill rotation template", "[Fill]")
     REQUIRE(compared > int(ironing.size()) / 2);
 }
 
+
+namespace {
+
+PrintRegionConfig ironing_config(IroningType type,
+                                 int top_surface_filament_id = 1,
+                                 int top_shell_layers        = 3,
+                                 int bottom_shell_layers     = 1)
+{
+    PrintRegionConfig cfg;
+    cfg.ironing_type.value            = type;
+    cfg.top_surface_filament_id.value = top_surface_filament_id;
+    cfg.top_shell_layers.value        = top_shell_layers;
+    cfg.bottom_shell_layers.value     = bottom_shell_layers;
+    cfg.outer_wall_filament_id.value  = 1;
+    cfg.wall_loops.value              = 2;
+    return cfg;
+}
+
+} // namespace
+
+TEST_CASE("Ironing an all-solid region uses the top surface filament on every layer", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::AllSolid, /*top_surface_filament_id=*/2);
+    const bool is_topmost_layer = GENERATE(false, true);
+    CAPTURE(is_topmost_layer);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, is_topmost_layer) == 2);
+}
+
+TEST_CASE("Ironing top surfaces uses the top surface filament when the region has top shells", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::TopSurfaces,
+                                                 /*top_surface_filament_id=*/3,
+                                                 /*top_shell_layers=*/2);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == 3);
+}
+
+TEST_CASE("Ironing top surfaces without top shells needs spiral mode and more than one bottom shell", "[Fill]")
+{
+    const PrintRegionConfig one_bottom_shell = ironing_config(IroningType::TopSurfaces,
+                                                              /*top_surface_filament_id=*/1,
+                                                              /*top_shell_layers=*/0,
+                                                              /*bottom_shell_layers=*/1);
+    const PrintRegionConfig two_bottom_shells = ironing_config(IroningType::TopSurfaces,
+                                                               /*top_surface_filament_id=*/1,
+                                                               /*top_shell_layers=*/0,
+                                                               /*bottom_shell_layers=*/2);
+
+    REQUIRE(Layer::choose_ironing_extruder(two_bottom_shells, /*spiral_mode=*/true, /*is_topmost_layer=*/false) == 1);
+    REQUIRE(Layer::choose_ironing_extruder(one_bottom_shell, /*spiral_mode=*/true, /*is_topmost_layer=*/false) == -1);
+    REQUIRE(Layer::choose_ironing_extruder(two_bottom_shells, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == -1);
+}
+
+TEST_CASE("Ironing the topmost surface only applies to the topmost layer", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::TopmostOnly, /*top_surface_filament_id=*/4);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/true) == 4);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == -1);
+}
+
+TEST_CASE("A region with ironing turned off is never ironed", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::NoIroning);
+    const bool spiral_mode      = GENERATE(false, true);
+    CAPTURE(spiral_mode);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, spiral_mode, /*is_topmost_layer=*/true) == -1);
+}
+
 TEST_CASE("Solid infill direction offsets every layer when no template is set", "[Fill]")
 {
     auto angles_for = [](int direction) {
@@ -1229,3 +1298,68 @@ TEST_CASE("Smoothing multiline lightning infill keeps its outlines connected", "
     REQUIRE(smooth.point_count > sharp.point_count);
     REQUIRE(smooth.sharp_turns < sharp.sharp_turns);
 }
+
+TEST_CASE("Sparse plane-path anchors match the printed infill", "[Fill][InternalBridge][Regression]")
+{
+    // Orca: Compare generated anchors with actual extrusion across plane-path patterns,
+    // smoothing, multiline and rotations; an origin shift must not pass as valid support.
+    const std::string pattern = GENERATE("hilbertcurve", "octagramspiral", "archimedeanchords");
+    const std::string smoothing = GENERATE("0%", "100%");
+    const int multiline = GENERATE(1, 2);
+    const bool rotated = GENERATE(false, true);
+    const bool separated = GENERATE(false, true);
+    CAPTURE(pattern, smoothing, multiline, rotated, separated);
+
+    auto config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({{"sparse_infill_pattern", pattern},
+                                   {"sparse_infill_density", "15%"},
+                                   {"sparse_infill_smooth_factor", smoothing},
+                                   {"fill_multiline", multiline},
+                                   {"infill_direction", 45},
+                                   {"sparse_infill_rotate_template", rotated ? "0,25,50" : ""},
+                                   {"align_infill_direction_to_model", rotated},
+                                   {"separated_infills", separated},
+                                   {"top_shell_layers", 0},
+                                   {"bottom_shell_layers", 0},
+                                   {"top_shell_thickness", 0},
+                                   {"bottom_shell_thickness", 0},
+                                   {"layer_height", 0.2},
+                                   {"initial_layer_print_height", 0.2},
+                                   {"resolution", 0.012}});
+    Print print;
+    Model model;
+    TriangleMesh mesh = make_cube(30, 24, 1);
+    if (separated) {
+        // Orca: Two disconnected bodies in one object must each use their own infill origin.
+        TriangleMesh second = make_cube(30, 24, 1);
+        second.translate(50, 0, 0);
+        mesh.merge(second);
+    }
+    Slic3r::Test::init_print({mesh}, print, model, config, nullptr, false);
+    if (rotated) {
+        model.objects.front()->instances.front()->set_rotation(Vec3d(0., 0., Geometry::deg2rad(23.)));
+        print.apply(model, config);
+    }
+    print.process();
+
+    const Layer &layer = *print.objects().front()->get_layer(4);
+    Polylines printed;
+    for (const LayerRegion *region : layer.regions())
+        for (const ExtrusionEntity *entity : region->fills.flatten().entities)
+            if (entity->role() == erInternalInfill)
+                entity->collect_polylines(printed);
+    REQUIRE_FALSE(printed.empty());
+    const AABBTreeLines::LinesDistancer<Line> printed_tree(to_lines(printed));
+
+    // Orca: Exclude perimeter connections: anchoring and extrusion can trim those differently.
+    const Polylines anchors = intersection_pl(layer.generate_sparse_infill_polylines_for_anchoring(nullptr, nullptr, nullptr),
+                                              shrink(to_polygons(layer.lslices), scale_(3.)));
+    REQUIRE_FALSE(anchors.empty());
+    double max_distance = 0.;
+    for (const Polyline &path : anchors)
+        for (const Point &point : path.equally_spaced_points(scale_(0.25)))
+            max_distance = std::max(max_distance, printed_tree.distance_from_lines<false>(point));
+    // Orca: Allow only the configured simplification tolerance; infill-scale offsets
+    // would hide anchors that no longer coincide with printed lines.
+    CHECK(unscale<double>(max_distance) <= config.opt_float("resolution"));
+}
diff --git a/tests/fff_print/test_gcodewriter.cpp b/tests/fff_print/test_gcodewriter.cpp
index b09b38e794..c0c9e794b9 100644
--- a/tests/fff_print/test_gcodewriter.cpp
+++ b/tests/fff_print/test_gcodewriter.cpp
@@ -574,6 +574,9 @@ static DynamicPrintConfig dual_extruder_toolchange_config()
     config.set_key_value("nozzle_temperature_range_high", new ConfigOptionInts({240, 240}));
     config.set_key_value("flush_multiplier",     new ConfigOptionFloats({1}));
     config.set_key_value("flush_volumes_matrix", new ConfigOptionFloats({0, 140, 140, 0}));
+    // Inside the 200x200 test bed; the default y, 220, is not, and generation rejects that.
+    config.set_key_value("wipe_tower_x",         new ConfigOptionFloats({50.}));
+    config.set_key_value("wipe_tower_y",         new ConfigOptionFloats({50.}));
     return config;
 }
 
diff --git a/tests/fff_print/test_perimeters.cpp b/tests/fff_print/test_perimeters.cpp
index a98877ad2f..7067c60c61 100644
--- a/tests/fff_print/test_perimeters.cpp
+++ b/tests/fff_print/test_perimeters.cpp
@@ -4,9 +4,14 @@
 #include "libslic3r/ExtrusionEntityCollection.hpp"
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/Print.hpp"
+#include "libslic3r/GCodeReader.hpp"
+#include "libslic3r/Model.hpp"
+#include "libslic3r/TriangleMesh.hpp"
 
 #include <algorithm>
 #include <cmath>
+#include <limits>
+#include <string>
 #include <vector>
 
 #include "test_helpers.hpp"
@@ -255,3 +260,238 @@ TEST_CASE("Only one wall on the first layer needs a bottom shell", "[Perimeters]
     // No bottom shell: the option is inert, down to the same walls an unchecked box gives.
     CHECK_THAT(one_wall_no_shell, Catch::Matchers::WithinAbs(plain_no_shell, 1.0));
 }
+
+namespace {
+
+// The layer that closes the cavity of box_over_cavity(), the first one printed over air.
+const double cavity_ceiling_z = 6.2;
+
+// A cone standing on its tip, flaring by 5mm of radius per mm of height: at a layer height of 0.2 every
+// wall of a layer lands a full millimetre outside the one below, entirely off the layer below but right
+// alongside the walls printed with it.
+TriangleMesh flared_cone()
+{
+    TriangleMesh cone = make_cone(20., 4.);
+    cone.mirror(Z);
+    cone.translate(0., 0., 4.);
+    return cone;
+}
+
+// A 30mm box holding a 20mm cavity from z=2 to z=6, with a 4mm hole punched down through the ceiling
+// of that cavity. The layer at cavity_ceiling_z bridges the cavity, and the walls of the hole sit in
+// the middle of that bridge, 15mm clear of anything the layer below supports.
+Print &box_over_cavity(Print &print, Model &model, const DynamicPrintConfig &config)
+{
+    ModelObject *object = model.add_object();
+    object->name = "box_over_cavity.stl";
+    object->add_volume(make_cube(30., 30., 8.), ModelVolumeType::MODEL_PART, false);
+    TriangleMesh cavity = make_cube(20., 20., 4.);
+    cavity.translate(5.f, 5.f, 2.f);
+    object->add_volume(std::move(cavity), ModelVolumeType::NEGATIVE_VOLUME, false);
+    TriangleMesh hole = make_cube(4., 4., 6.);
+    hole.translate(13.f, 13.f, 5.f);
+    object->add_volume(std::move(hole), ModelVolumeType::NEGATIVE_VOLUME, false);
+    object->add_instance();
+    object->ensure_on_bed();
+
+    print.auto_assign_extruders(object);
+    print.apply(model, config);
+    print.validate();
+    print.set_status_silent();
+    return print;
+}
+
+// Every setting the assertions below depend on, so none of them rests on a default.
+DynamicPrintConfig unsupported_walls_config(const char *wall_generator, bool unsupported_wall_last)
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({
+        { "wall_generator",             wall_generator },
+        { "layer_height",               0.2 },
+        { "initial_layer_print_height", 0.2 },
+        { "wall_loops",                 3 },
+        { "detect_overhang_wall",       true },
+        // Outer wall first, so an unsupported loop only ends up last if the feature puts it there.
+        { "wall_sequence",              "outer wall/inner wall" },
+        { "is_infill_first",            false },
+        { "sparse_infill_density",      "15%" },
+        { "unsupported_wall_last",      unsupported_wall_last },
+        { "gcode_comments",             true },
+    });
+    return config;
+}
+
+// A loop extruded entirely in mid air: every one of its paths is an overhang.
+bool unsupported_loop(const ExtrusionEntity *entity)
+{
+    if (! entity->is_loop())
+        return false;
+    const ExtrusionPaths &paths = static_cast<const ExtrusionLoop *>(entity)->paths;
+    return ! paths.empty() && std::all_of(paths.begin(), paths.end(),
+                                          [](const ExtrusionPath &path) { return path.role() == erOverhangPerimeter; });
+}
+
+// The loops of every wall island of the print, island by island, in extrusion order.
+std::vector<std::vector<const ExtrusionLoop*>> wall_islands(const Print &print)
+{
+    std::vector<std::vector<const ExtrusionLoop*>> islands;
+    for (const Layer *layer : print.objects().front()->layers())
+        for (const LayerRegion *region : layer->regions())
+            for (const ExtrusionEntity *island : region->perimeters.entities) {
+                std::vector<const ExtrusionLoop*> loops;
+                for (const ExtrusionEntity *entity : static_cast<const ExtrusionEntityCollection*>(island)->entities)
+                    if (entity->is_loop())
+                        loops.push_back(static_cast<const ExtrusionLoop*>(entity));
+                islands.push_back(std::move(loops));
+            }
+    return islands;
+}
+
+// Islands where a loop that is anchored is extruded after one that is not.
+int islands_with_a_supported_loop_last(const Print &print)
+{
+    int count = 0;
+    for (const std::vector<const ExtrusionLoop*> &loops : wall_islands(print)) {
+        bool seen_unsupported = false;
+        for (const ExtrusionLoop *loop : loops) {
+            if (unsupported_loop(loop))
+                seen_unsupported = true;
+            else if (seen_unsupported) {
+                ++ count;
+                break;
+            }
+        }
+    }
+    return count;
+}
+
+// The unsupported loops of the print, and those of them held back for the infill.
+std::vector<const ExtrusionLoop*> unsupported_loops(const Print &print, double print_z = -1.)
+{
+    std::vector<const ExtrusionLoop*> loops;
+    for (const Layer *layer : print.objects().front()->layers()) {
+        if (print_z >= 0. && std::abs(layer->print_z - print_z) > EPSILON)
+            continue;
+        for (const LayerRegion *region : layer->regions())
+            for (const ExtrusionEntity *island : region->perimeters.entities)
+                for (const ExtrusionEntity *entity : static_cast<const ExtrusionEntityCollection*>(island)->entities)
+                    if (unsupported_loop(entity))
+                        loops.push_back(static_cast<const ExtrusionLoop*>(entity));
+    }
+    return loops;
+}
+
+int loops_held_back_for_infill(const std::vector<const ExtrusionLoop*> &loops)
+{
+    return int(std::count_if(loops.begin(), loops.end(), [](const ExtrusionLoop *loop) { return loop->print_after_infill; }));
+}
+
+// The G-code emitted at `print_z`, so the order of one layer can be read on its own.
+std::string layer_gcode(const std::string &gcode, double print_z)
+{
+    std::string out;
+    GCodeReader reader;
+    reader.parse_buffer(gcode, [&out, print_z](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+        if (std::abs(self.z() - print_z) < EPSILON)
+            out += line.raw() + "\n";
+    });
+    return out;
+}
+
+} // namespace
+
+// Whatever the wall order asks for, a loop with nothing under it cannot be extruded before the loops it
+// leans on. The flared cone gives every layer an outer wall that lands completely off the one below, and
+// the outer wall first sequence would otherwise put it down before any of them.
+TEST_CASE("Unsupported wall loops are extruded after the walls that anchor them", "[Perimeters]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    CAPTURE(wall_generator);
+
+    auto slice_cone = [wall_generator](bool unsupported_wall_last, Print &print) {
+        init_and_process_print({ flared_cone() }, print, unsupported_walls_config(wall_generator, unsupported_wall_last));
+        REQUIRE_FALSE(print.objects().empty());
+    };
+
+    Print on;
+    slice_cone(true, on);
+    // Without unsupported loops to reorder the rest of the test would pass on an empty print.
+    REQUIRE(unsupported_loops(on).size() > 0);
+    CHECK(islands_with_a_supported_loop_last(on) == 0);
+
+    SECTION("the held back loops run innermost first") {
+        for (const std::vector<const ExtrusionLoop*> &loops : wall_islands(on)) {
+            int previous_inset = std::numeric_limits<int>::max();
+            for (const ExtrusionLoop *loop : loops)
+                if (unsupported_loop(loop)) {
+                    CHECK(loop->inset_idx <= previous_inset);
+                    previous_inset = loop->inset_idx;
+                }
+        }
+    }
+
+    SECTION("switched off, the configured wall order is left alone") {
+        Print off;
+        slice_cone(false, off);
+        REQUIRE(unsupported_loops(off).size() == unsupported_loops(on).size());
+        // Outer wall first puts the unsupported outer wall ahead of the walls behind it.
+        CHECK(islands_with_a_supported_loop_last(off) > 0);
+    }
+}
+
+// A loop the walls cannot reach is a different case: only the bridges of its own layer will ever hold it,
+// so it has to wait for them - while a loop that runs alongside a wall keeps its place, because the
+// bridges anchor on it instead.
+TEST_CASE("A wall loop out of reach of the layer below waits for the infill", "[Perimeters]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    CAPTURE(wall_generator);
+
+    Print print;
+    Model model;
+    box_over_cavity(print, model, unsupported_walls_config(wall_generator, true));
+    print.process();
+
+    const std::vector<const ExtrusionLoop*> hole_loops = unsupported_loops(print, cavity_ceiling_z);
+    REQUIRE(hole_loops.size() > 0);
+    CHECK(loops_held_back_for_infill(hole_loops) == int(hole_loops.size()));
+
+    SECTION("a loop alongside a supported wall is not held back") {
+        Print cone;
+        init_and_process_print({ flared_cone() }, cone, unsupported_walls_config(wall_generator, true));
+        const std::vector<const ExtrusionLoop*> loops = unsupported_loops(cone);
+        REQUIRE(loops.size() > 0);
+        CHECK(loops_held_back_for_infill(loops) == 0);
+    }
+
+    SECTION("switched off, no loop is held back") {
+        Print off;
+        Model off_model;
+        box_over_cavity(off, off_model, unsupported_walls_config(wall_generator, false));
+        off.process();
+        const std::vector<const ExtrusionLoop*> loops = unsupported_loops(off, cavity_ceiling_z);
+        REQUIRE(loops.size() == hole_loops.size());
+        CHECK(loops_held_back_for_infill(loops) == 0);
+    }
+}
+
+// The held back loops reach the G-code in a second pass, after the infill of their layer: on the layer
+// that closes the cavity the walls of the hole are extruded once the bridge is down, so the layer emits
+// perimeters, then infill, then the perimeters that were waiting for it.
+TEST_CASE("Loops waiting for the infill are extruded after it", "[Perimeters]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    CAPTURE(wall_generator);
+
+    auto ceiling_roles = [wall_generator](bool unsupported_wall_last) {
+        Print print;
+        Model model;
+        box_over_cavity(print, model, unsupported_walls_config(wall_generator, unsupported_wall_last));
+        const std::string layer = layer_gcode(gcode(print), cavity_ceiling_z);
+        REQUIRE_FALSE(layer.empty());
+        return role_sequence(layer, { "perimeter", "infill" });
+    };
+
+    CHECK(ceiling_roles(true)  == std::vector<std::string>{ "perimeter", "infill", "perimeter" });
+    CHECK(ceiling_roles(false) == std::vector<std::string>{ "perimeter", "infill" });
+}
diff --git a/tests/fff_print/test_printobject.cpp b/tests/fff_print/test_printobject.cpp
index fb7fe2c1fd..a373a1ad39 100644
--- a/tests/fff_print/test_printobject.cpp
+++ b/tests/fff_print/test_printobject.cpp
@@ -4,11 +4,18 @@
 #include "libslic3r/Print.hpp"
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/GCodeReader.hpp"
+#include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/AABBTreeLines.hpp"
 
 #include "test_helpers.hpp"
 
+#include <cmath>
 #include <iterator>
+#include <map>
 #include <set>
+#include <string>
+#include <utility>
+#include <vector>
 
 using namespace Slic3r;
 using namespace Slic3r::Test;
@@ -130,3 +137,438 @@ TEST_CASE("Initial layer height is honored", "[PrintObject]")
     REQUIRE_THAT(*layer_zs.begin(),            Catch::Matchers::WithinAbs(0.3, 1e-4));
     REQUIRE_THAT(*std::next(layer_zs.begin()), Catch::Matchers::WithinAbs(0.5, 1e-4));
 }
+
+static TriangleMesh internal_bridge_step()
+{
+    // Orca: The smaller tower leaves a shoulder whose solid skin needs internal bridges
+    // over the sparse infill in the base, without relying on an external model file.
+    TriangleMesh mesh = make_cube(30, 24, 3);
+    TriangleMesh tower = make_cube(14, 10, 1);
+    tower.translate(8, 7, 3);
+    mesh.merge(tower);
+    return mesh;
+}
+
+static DynamicPrintConfig internal_bridge_config(const std::string &pattern, int multiline)
+{
+    auto config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({{"sparse_infill_pattern", pattern},
+                                   {"fill_multiline", multiline},
+                                   {"sparse_infill_density", "15%"},
+                                   {"sparse_infill_smooth_factor", "100%"},
+                                   {"infill_direction", 45},
+                                   {"internal_bridge_angle", 0},
+                                   {"thick_internal_bridges", true},
+                                   {"top_shell_layers", 3},
+                                   {"bottom_shell_layers", 2},
+                                   {"top_shell_thickness", 0},
+                                   {"bottom_shell_thickness", 0},
+                                   {"layer_height", 0.2},
+                                   {"initial_layer_print_height", 0.2}});
+    return config;
+}
+
+TEST_CASE("Internal bridge angles follow the lower infill layer and model rotation", "[PrintObject][InternalBridge][Regression]")
+{
+    const std::string pattern = GENERATE("hilbertcurve", "octagramspiral");
+    // Orca: Cover both a central line (odd counts) and offset pairs (even counts).
+    const int multiline = GENERATE(1, 2, 3);
+    CAPTURE(multiline);
+    const double rotation = GENERATE(23., -123.);
+    const std::vector<double> cycle{10., 30., 70.};
+    auto config = internal_bridge_config(pattern, multiline);
+    config.set_deserialize_strict({{"sparse_infill_rotate_template", "10,30,70"},
+                                   {"align_infill_direction_to_model", true},
+                                   {"separated_infills", false}});
+    Print print;
+    Model model;
+    init_print({internal_bridge_step()}, print, model, config, nullptr, false);
+    model.objects.front()->instances.front()->set_rotation(Vec3d(0., 0., Geometry::deg2rad(rotation)));
+    print.apply(model, config);
+    print.process();
+    const PrintObject &object = *print.objects().front();
+    size_t bridges = 0;
+    for (size_t i = 1; i < object.layer_count(); ++i) {
+        // Orca: The support is one layer below the bridge. Check the template and model
+        // rotation together, including normalization when the resulting angle is negative.
+        double expected = std::fmod(cycle[(i - 1) % cycle.size()] + 90. + rotation, 180.);
+        if (expected < 0.) expected += 180.;
+        for (const LayerRegion *region : object.get_layer(i)->regions())
+            for (const Surface *surface : region->fill_surfaces.filter_by_type(stInternalBridge)) {
+                CAPTURE(pattern, rotation, i);
+                CHECK_THAT(Geometry::rad2deg(surface->bridge_angle), Catch::Matchers::WithinAbs(expected, 0.001));
+                ++bridges;
+            }
+    }
+    REQUIRE(bridges > 0);
+}
+
+TEST_CASE("Turning infill does not replace the anchors of another region", "[PrintObject][InternalBridge][Regression]")
+{
+    // Orca: Keep the right-hand region fixed while changing the left-hand pattern in the
+    // same object. Its bridge areas must be independent of a previous candidate's anchors.
+    const int multiline = GENERATE(1, 2, 3);
+    CAPTURE(multiline);
+    auto right_bridges = [multiline](const std::string &left_pattern) {
+        auto config = internal_bridge_config(left_pattern, multiline);
+        Print print;
+        Model model;
+        init_print({internal_bridge_step()}, print, model, config, nullptr, false);
+        TriangleMesh right = internal_bridge_step();
+        right.translate(50, 0, 0);
+        ModelVolume *volume = model.objects.front()->add_volume(std::move(right));
+        volume->config.set_key_value("sparse_infill_pattern", new ConfigOptionEnum<InfillPattern>(ipRectilinear));
+        volume->config.set_key_value("infill_direction", new ConfigOptionFloat(17.));
+        print.apply(model, config);
+        print.process();
+        std::map<size_t, Polygons> result;
+        const PrintObject &object = *print.objects().front();
+        for (size_t i = 0; i < object.layer_count(); ++i)
+            for (const LayerRegion *region : object.get_layer(i)->regions())
+                if (region->region().config().infill_direction == 17.)
+                    polygons_append(result[i], to_polygons(region->fill_surfaces.filter_by_type(stInternalBridge)));
+        return result;
+    };
+    const auto baseline = right_bridges("rectilinear");
+    const auto actual = right_bridges(GENERATE("hilbertcurve", "octagramspiral"));
+    REQUIRE(actual.size() == baseline.size());
+    double total_area = 0.;
+    for (const auto &[layer, expected] : baseline) {
+        CAPTURE(layer);
+        const auto &polys = actual.at(layer);
+        CHECK(area(diff(expected, polys)) < scaled<double>(1.) * scaled<double>(1.) * 1e-6);
+        CHECK(area(diff(polys, expected)) < scaled<double>(1.) * scaled<double>(1.) * 1e-6);
+        total_area += area(expected);
+    }
+    REQUIRE(total_area > 0.);
+}
+
+TEST_CASE("Rounded internal bridges end on printed support", "[PrintObject][InternalBridge][Regression]")
+{
+    const std::string pattern = GENERATE("hilbertcurve", "octagramspiral");
+    const bool separated = GENERATE(false, true);
+    CAPTURE(pattern, separated);
+    auto config = internal_bridge_config(pattern, 1);
+    config.set_deserialize_strict({{"infill_wall_overlap", "0%"}, {"separated_infills", separated}});
+    TriangleMesh mesh = internal_bridge_step();
+    if (separated) {
+        TriangleMesh second = internal_bridge_step();
+        second.translate(50, 0, 0);
+        mesh.merge(second);
+    }
+    Print print;
+    Model model;
+    init_print({mesh}, print, model, config, nullptr, false);
+    print.process();
+
+    // Orca: Check final extrusion endpoints after polygon cleanup and fill generation.
+    // A correct bridge angle and correct sparse anchors alone do not guarantee contact.
+    const PrintObject &object = *print.objects().front();
+    size_t checked = 0;
+    for (size_t i = 1; i < object.layer_count(); ++i) {
+        Polygons support;
+        Polylines walls;
+        for (const LayerRegion *region : object.get_layer(i - 1)->regions()) {
+            region->perimeters.polygons_covered_by_width(support, 0.f);
+            region->fills.polygons_covered_by_width(support, 0.f);
+            region->perimeters.collect_polylines(walls);
+        }
+        REQUIRE_FALSE(support.empty());
+        const AABBTreeLines::LinesDistancer<Line> support_tree(to_lines(union_(support)));
+        const AABBTreeLines::LinesDistancer<Line> wall_tree(to_lines(walls));
+        for (const LayerRegion *region : object.get_layer(i)->regions())
+            for (const ExtrusionEntity *entity : region->fills.flatten().entities) {
+                if (entity->role() != erInternalBridgeInfill)
+                    continue;
+                const auto *path = dynamic_cast<const ExtrusionPath *>(entity);
+                REQUIRE(path != nullptr);
+                for (const Line &line : path->polyline.to_polyline().lines()) {
+                    // Orca: Sample span ends, excluding short connectors and wall overlap.
+                    if (line.length() < scale_(std::max(0.7, 3. * path->width)))
+                        continue;
+                    for (const Point &point : {line.a, line.b}) {
+                        if (wall_tree.distance_from_lines<false>(point) <= scale_(0.5))
+                            continue;
+                        CAPTURE(i, point.x(), point.y());
+                        const double gap = unscale<double>(support_tree.distance_from_lines<true>(point)) - 0.5 * path->width;
+                        CHECK(gap <= 0.1);
+                        ++checked;
+                    }
+                }
+            }
+    }
+    REQUIRE(checked > 0);
+}
+
+TEST_CASE("Enabling separated infill recomputes body origins", "[PrintObject][InternalBridge][Regression]")
+{
+    const std::string pattern = GENERATE("hilbertcurve", "octagramspiral", "archimedeanchords");
+    CAPTURE(pattern);
+    auto footprint = [&](bool reslice) {
+        auto config = internal_bridge_config(pattern, 2);
+        config.set_deserialize_strict({{"separated_infills", !reslice}});
+        TriangleMesh mesh = internal_bridge_step();
+        TriangleMesh second = internal_bridge_step();
+        second.translate(50, 0, 0);
+        mesh.merge(second);
+        Print print;
+        Model model;
+        init_print({mesh}, print, model, config, nullptr, false);
+        print.process();
+        if (reslice) {
+            // Orca: Enabling centering after a completed slice must rebuild the body
+            // origins now shared by bridge preparation and printed infill.
+            config.set_deserialize_strict({{"separated_infills", true}});
+            print.apply(model, config);
+            print.process();
+        }
+        Polygons result;
+        for (const LayerRegion *region : print.objects().front()->get_layer(4)->regions())
+            region->fills.polygons_covered_by_width(result, 0.f);
+        return union_(result);
+    };
+    const Polygons fresh = footprint(false);
+    const Polygons resliced = footprint(true);
+    REQUIRE_FALSE(fresh.empty());
+    CHECK(area(diff(fresh, resliced)) < scaled<double>(1.) * scaled<double>(1.) * 1e-6);
+    CHECK(area(diff(resliced, fresh)) < scaled<double>(1.) * scaled<double>(1.) * 1e-6);
+}
+
+TEST_CASE("Surface centering survives changes to separated infill settings", "[PrintObject][SurfaceInfill][Regression]")
+{
+    const std::string pattern = GENERATE("archimedeanchords", "octagramspiral");
+    const std::string initial_center = GENERATE("each_surface", "each_model", "each_assembly");
+    const std::string final_center = GENERATE("each_surface", "each_model", "each_assembly");
+    const bool separated = GENERATE(false, true);
+    const std::string top_order = GENERATE("default", "outward", "inward");
+    const std::string bottom_order = top_order == "outward" ? "inward" : top_order == "inward" ? "outward" : "default";
+    const std::string density = GENERATE("80%", "100%");
+    const bool change_center = initial_center != final_center;
+    CAPTURE(pattern, initial_center, final_center, separated, top_order, bottom_order, density);
+
+    auto config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({{"top_surface_pattern", pattern},
+                                   {"bottom_surface_pattern", pattern},
+                                   {"top_surface_fill_order", top_order},
+                                   {"bottom_surface_fill_order", bottom_order},
+                                   {"top_surface_density", density},
+                                   {"bottom_surface_density", density},
+                                   {"center_of_surface_pattern", initial_center},
+                                   {"separated_infills", change_center ? separated : !separated},
+                                   {"sparse_infill_pattern", "rectilinear"},
+                                   {"sparse_infill_density", "15%"},
+                                   {"top_shell_layers", 2},
+                                   {"bottom_shell_layers", 2},
+                                   {"top_shell_thickness", 0},
+                                   {"bottom_shell_thickness", 0},
+                                   {"layer_height", 0.2},
+                                   {"initial_layer_print_height", 0.2}});
+
+    // Orca: Two disconnected bodies exercise per-body centering. The offset tower also
+    // makes each-surface and each-model centering differ on the top surfaces.
+    TriangleMesh mesh = make_cube(30, 24, 2);
+    TriangleMesh tower = make_cube(12, 10, 1);
+    tower.translate(4, 3, 2);
+    mesh.merge(tower);
+    TriangleMesh second = mesh;
+    second.translate(50, 0, 0);
+    mesh.merge(second);
+
+    // Orca: Equal footprints can hide reordered or reversed paths. Retain their point
+    // sequences and ordering protection to cover the directional surface behavior too.
+    struct SurfaceFillSnapshot {
+        std::map<bool, std::vector<Points>> paths;
+        bool protected_order = true;
+    };
+    auto surface_fills = [](const Print &print) {
+        std::map<std::pair<size_t, ExtrusionRole>, SurfaceFillSnapshot> result;
+        const PrintObject &object = *print.objects().front();
+        for (size_t i = 0; i < object.layer_count(); ++i) {
+            auto collect = [&](const auto &self, const ExtrusionEntity &entity, bool no_sort) -> void {
+                if (const auto *collection = dynamic_cast<const ExtrusionEntityCollection *>(&entity)) {
+                    for (const ExtrusionEntity *child : collection->entities)
+                        self(self, *child, no_sort || collection->no_sort);
+                } else if (entity.role() == erTopSolidInfill || entity.role() == erBottomSurface) {
+                    const auto *path = dynamic_cast<const ExtrusionPath *>(&entity);
+                    REQUIRE(path != nullptr);
+                    auto &snapshot = result[{i, entity.role()}];
+                    // Orca: The centered test model has one body on either side of X=0.
+                    // Their traversal order may vary; preserve path order within each body.
+                    Points points = path->polyline.to_polyline().points;
+                    REQUIRE_FALSE(points.empty());
+                    snapshot.paths[points.front().x() > 0].push_back(std::move(points));
+                    snapshot.protected_order &= no_sort && !path->can_reverse();
+                }
+            };
+            for (const LayerRegion *region : object.get_layer(i)->regions())
+                collect(collect, region->fills, false);
+        }
+        return result;
+    };
+
+    Print print;
+    Model model;
+    init_print({mesh}, print, model, config, nullptr, false);
+    print.process();
+    const auto initial = surface_fills(print);
+    config.set_deserialize_strict({{"center_of_surface_pattern", final_center}, {"separated_infills", separated}});
+    print.apply(model, config);
+    // Orca: Preparation owns the body origins, and its invalidation must also force
+    // regeneration of top/bottom extrusion paths, even when sparse infill is unchanged.
+    CHECK_FALSE(print.objects().front()->is_step_done(posPrepareInfill));
+    CHECK_FALSE(print.objects().front()->is_step_done(posInfill));
+    print.process();
+    const auto resliced = surface_fills(print);
+
+    Print fresh_print;
+    Model fresh_model;
+    init_print({mesh}, fresh_print, fresh_model, config, nullptr, false);
+    fresh_print.process();
+    const auto fresh = surface_fills(fresh_print);
+    REQUIRE_FALSE(fresh.empty());
+    REQUIRE(resliced.size() == fresh.size());
+    std::set<ExtrusionRole> roles;
+    bool changed_paths = false;
+    for (const auto &entry : fresh) {
+        CAPTURE(entry.first.first, entry.first.second);
+        REQUIRE_FALSE(entry.second.paths.empty());
+        roles.insert(entry.first.second);
+        REQUIRE(resliced.count(entry.first) == 1);
+        REQUIRE(initial.count(entry.first) == 1);
+        const auto &actual = resliced.at(entry.first);
+        const auto &expected = entry.second;
+        const auto &before = initial.at(entry.first);
+        CHECK((actual.paths == expected.paths));
+        if (!change_center)
+            CHECK((actual.paths == before.paths));
+        if (top_order != "default") {
+            CHECK(expected.protected_order);
+            CHECK(actual.protected_order);
+            CHECK(before.protected_order);
+        }
+        changed_paths |= expected.paths != before.paths;
+    }
+    CHECK(roles.count(erTopSolidInfill) == 1);
+    CHECK(roles.count(erBottomSurface) == 1);
+    // Orca: Guard against a vacuous comparison: changing surface centering must change
+    // the printed pattern, while toggling separated sparse infill must leave it alone.
+    CHECK(changed_paths == change_center);
+}
+
+TEST_CASE("Separated infill keeps fragmented and nested bodies independent", "[PrintObject][SurfaceInfill][Regression]")
+{
+    constexpr size_t grid_size = 8;
+    TriangleMesh mesh;
+    auto add_box = [&](double x, double y, double width, double depth) {
+        TriangleMesh box = make_cube(width, depth, 0.6);
+        box.translate(x, y, 0);
+        mesh.merge(box);
+    };
+    // Orca: Many small islands exercise spatial pruning and the tree's original
+    // island indices. A pillar inside a frame also overlaps its bounding box,
+    // but must remain a separate body because it lies entirely inside the hole.
+    for (size_t x = 0; x < grid_size; ++ x)
+        for (size_t y = 0; y < grid_size; ++ y)
+            add_box(6 * x, 6 * y, 3, 3);
+    add_box(54, 0, 20, 4);
+    add_box(54, 16, 20, 4);
+    add_box(54, 0, 4, 20);
+    add_box(70, 0, 4, 20);
+    add_box(62, 8, 4, 4);
+
+    auto config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({{"separated_infills", true},
+                                   {"center_of_surface_pattern", "each_surface"},
+                                   {"layer_height", 0.2},
+                                   {"initial_layer_print_height", 0.2},
+                                   {"elefant_foot_compensation", 0},
+                                   {"wall_loops", 1}});
+    Print print;
+    Model model;
+    init_print({mesh}, print, model, config, nullptr, false);
+    // Orca: Prepare body bounds through the public pipeline, then inspect the object read-only.
+    print.process();
+    const PrintObject &object = *print.objects().front();
+    REQUIRE(object.layer_count() > 1);
+    for (const Layer *layer : object.layers()) {
+        REQUIRE(layer->lslices.size() == grid_size * grid_size + 2);
+        REQUIRE(layer->lslices_separated_component_bboxes.size() == layer->lslices.size());
+        size_t holes = 0;
+        for (size_t i = 0; i < layer->lslices.size(); ++ i) {
+            const BoundingBox &body = layer->lslices_separated_component_bboxes[i];
+            const BoundingBox &island = layer->lslices_bboxes[i];
+            CHECK(body.min == island.min);
+            CHECK(body.max == island.max);
+            holes += layer->lslices[i].holes.size();
+        }
+        CHECK(holes == 1);
+    }
+}
+
+TEST_CASE("Body centering survives islands merging and splitting between layers", "[PrintObject][SurfaceInfill][Regression]")
+{
+    const bool separated = GENERATE(false, true);
+    CAPTURE(separated);
+    // Orca: Four posts join through horizontal then vertical rails, creating a
+    // cycle of overlaps before splitting into four islands again. This exercises
+    // redundant connections and indexing either adjacent layer. A fifth post
+    // stays separate at every height.
+    TriangleMesh mesh;
+    for (int x : {0, 8})
+        for (int y : {0, 8}) {
+            TriangleMesh post = make_cube(4, 4, 1);
+            post.translate(x, y, 0);
+            mesh.merge(post);
+        }
+    for (int y : {0, 8}) {
+        TriangleMesh rail = make_cube(12, 4, 0.2);
+        rail.translate(0, y, 0.2);
+        mesh.merge(rail);
+    }
+    for (int x : {0, 8}) {
+        TriangleMesh rail = make_cube(4, 12, 0.2);
+        rail.translate(x, 0, 0.4);
+        mesh.merge(rail);
+    }
+    TriangleMesh isolated = make_cube(4, 4, 1);
+    isolated.translate(20, 0, 0);
+    mesh.merge(isolated);
+
+    auto config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({{"separated_infills", separated},
+                                   {"center_of_surface_pattern", separated ? "each_surface" : "each_model"},
+                                   {"layer_height", 0.2},
+                                   {"initial_layer_print_height", 0.2},
+                                   {"elefant_foot_compensation", 0},
+                                   {"wall_loops", 1}});
+    Print print;
+    Model model;
+    init_print({mesh}, print, model, config, nullptr, false);
+    // Orca: Prepare body bounds through the public pipeline, then inspect the object read-only.
+    print.process();
+    const PrintObject &object = *print.objects().front();
+    REQUIRE(object.layer_count() == 5);
+    REQUIRE(object.get_layer(0)->lslices.size() == 5);
+    REQUIRE(object.get_layer(1)->lslices.size() == 3);
+    REQUIRE(object.get_layer(2)->lslices.size() == 3);
+    REQUIRE(object.get_layer(4)->lslices.size() == 5);
+
+    BoundingBox isolated_bbox = object.get_layer(0)->lslices_bboxes.front();
+    for (const BoundingBox &bbox : object.get_layer(0)->lslices_bboxes)
+        if (bbox.min.x() > isolated_bbox.min.x())
+            isolated_bbox = bbox;
+    BoundingBox connected_bbox;
+    for (const Layer *layer : object.layers())
+        for (const BoundingBox &bbox : layer->lslices_bboxes)
+            if (bbox.min.x() < isolated_bbox.min.x())
+                connected_bbox.merge(bbox);
+    for (const Layer *layer : object.layers()) {
+        REQUIRE(layer->lslices_separated_component_bboxes.size() == layer->lslices.size());
+        for (size_t i = 0; i < layer->lslices.size(); ++ i) {
+            const BoundingBox &expected = layer->lslices_bboxes[i].min.x() < isolated_bbox.min.x() ? connected_bbox : isolated_bbox;
+            const BoundingBox &actual = layer->lslices_separated_component_bboxes[i];
+            CHECK(actual.min == expected.min);
+            CHECK(actual.max == expected.max);
+        }
+    }
+}
diff --git a/tests/fff_print/test_support_material.cpp b/tests/fff_print/test_support_material.cpp
index 4564c0b034..97a9cea9e1 100644
--- a/tests/fff_print/test_support_material.cpp
+++ b/tests/fff_print/test_support_material.cpp
@@ -5,6 +5,7 @@
 
 #include <cmath>
 #include <map>
+#include <mutex>
 #include <set>
 #include <vector>
 
@@ -128,6 +129,49 @@ TEST_CASE("Enforced support layers are generated", "[SupportMaterial]")
     REQUIRE(enforced.objects().front()->support_layers().size() > 0);
 }
 
+// Support-needed statuses raised while slicing support_capital() with support off. The CLI lists these
+// in result.json and fails on them under --strict. Collected under a lock: generate_support_material()
+// runs on TBB workers.
+static std::vector<PrintBase::SlicingStatus> support_needed_statuses(bool no_check)
+{
+    Slic3r::Print print;
+    Slic3r::Model model;
+    Slic3r::Test::init_print({ support_capital() }, print, model, {
+        { "enable_support",         0 },
+        { "enforce_support_layers", 0 }
+    });
+    print.set_no_check_flag(no_check);
+
+    std::mutex mutex;
+    std::vector<PrintBase::SlicingStatus> statuses;
+    print.set_status_callback([&mutex, &statuses](const PrintBase::SlicingStatus &status) {
+        if (status.message_type != PrintStateBase::SlicingNeedSupportOn)
+            return;
+        std::lock_guard<std::mutex> lock(mutex);
+        statuses.push_back(status);
+    });
+    print.process();
+    return statuses;
+}
+
+TEST_CASE("An overhang sliced with support off reports that support is needed", "[SupportMaterial]")
+{
+    // The 40mm cap reaches ~22mm past its 8mm stem, beyond the 6mm cantilever limit of
+    // PrintObject::is_support_necessary().
+    const std::vector<PrintBase::SlicingStatus> statuses = support_needed_statuses(false);
+    REQUIRE(! statuses.empty());
+    for (const PrintBase::SlicingStatus &status : statuses) {
+        // The CLI only considers step warnings (warning_step != -1), and --strict only NON_CRITICAL ones.
+        CHECK(status.warning_level == PrintStateBase::WarningLevel::NON_CRITICAL);
+        CHECK(status.warning_step != -1);
+    }
+}
+
+TEST_CASE("The no-check flag skips the support-needed check", "[SupportMaterial]")
+{
+    CHECK(support_needed_statuses(true).empty());
+}
+
 SCENARIO("Support layer Z honors contact distance", "[SupportMaterial]")
 {
     // Box h = 20mm, hole bottom at 5mm, hole height 10mm (top edge at 15mm).
diff --git a/tests/fff_print/test_tree_support.cpp b/tests/fff_print/test_tree_support.cpp
index 362eb0ca56..fbb40bb8f3 100644
--- a/tests/fff_print/test_tree_support.cpp
+++ b/tests/fff_print/test_tree_support.cpp
@@ -1,5 +1,7 @@
 #include <catch2/catch_all.hpp>
 
+#include <algorithm>
+
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/TriangleMesh.hpp"
 
@@ -33,10 +35,13 @@ TriangleMesh scaled(TestMesh id, float scale)
     return mesh;
 }
 
+// `extra` is applied last, so a caller can add or override any key.
 void slice_with_tree_support(const TriangleMesh &mesh, Slic3r::Print &print, const char *style,
-                             int threshold_angle = 30, int build_plate_only = 0, int raft_layers = 0)
+                             int threshold_angle = 30, int build_plate_only = 0, int raft_layers = 0,
+                             std::initializer_list<Slic3r::ConfigBase::SetDeserializeItem> extra = {})
 {
-    Slic3r::Test::init_and_process_print({ mesh }, print, {
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({
         { "enable_support",              1 },
         { "support_type",                "tree(auto)" },
         { "support_style",               style },
@@ -45,6 +50,8 @@ void slice_with_tree_support(const TriangleMesh &mesh, Slic3r::Print &print, con
         { "raft_layers",                 raft_layers },
         { "layer_height",                0.2 },
     });
+    config.set_deserialize_strict(extra);
+    Slic3r::Test::init_and_process_print({ mesh }, print, config);
 }
 
 Points support_points(const Slic3r::Print &print)
@@ -63,6 +70,32 @@ size_t support_point_count(const TriangleMesh &mesh, const char *style, int thre
     return support_points(print).size();
 }
 
+// Index of the first differing point, or the common length when they match. An index keeps a
+// failure readable; comparing the vectors themselves dumps thousands of points.
+size_t first_difference(const Points &a, const Points &b)
+{
+    const size_t common = std::min(a.size(), b.size());
+    for (size_t i = 0; i < common; ++i)
+        if (a[i] != b[i])
+            return i;
+    return common;
+}
+
+// Slice `mesh` twice and require an identical support point sequence. Point counts and total
+// length are order insensitive, so the sequence is what a reordering shows up in.
+void sliced_twice_matches(const TriangleMesh &mesh, int build_plate_only, const char *style = "tree_slim",
+                          std::initializer_list<Slic3r::ConfigBase::SetDeserializeItem> extra = {})
+{
+    Slic3r::Print first_print, second_print;
+    slice_with_tree_support(mesh, first_print, style, 30, build_plate_only, 0, extra);
+    slice_with_tree_support(mesh, second_print, style, 30, build_plate_only, 0, extra);
+    const Points first  = support_points(first_print);
+    const Points second = support_points(second_print);
+    REQUIRE(first.size() > 1000); // without support the comparison below passes vacuously
+    REQUIRE(second.size() == first.size());
+    REQUIRE(first_difference(first, second) == first.size());
+}
+
 } // namespace
 
 TEST_CASE("Tree support is generated for an overhang and not for a plain cube", "[TreeSupport]")
@@ -123,3 +156,35 @@ TEST_CASE("A raft is still generated under tree support", "[TreeSupport]")
     // The raft goes under the object.
     REQUIRE(rafted_object->layers().front()->print_z > unrafted_object->layers().front()->print_z);
 }
+
+// drop_nodes() decides the node merges and spawns the next layer's nodes in parallel. Every one of
+// those decisions has to be applied in a fixed order, or the same model gives different branches on
+// each slice.
+TEST_CASE("Tree support toolpaths do not depend on thread scheduling", "[TreeSupport][Regression]")
+{
+    // Scaled up so that a layer holds enough nodes for the parallel range to be split. At stock
+    // size it stays in one chunk and the order never varies.
+    SECTION("overhang")            { sliced_twice_matches(scaled(TestMesh::overhang, 2.f), 0); }
+    SECTION("bridge with hole")    { sliced_twice_matches(scaled(TestMesh::bridge_with_hole, 3.f), 0); }
+    // Dropping every branch that cannot reach the bed leaves the survivors dense enough that the
+    // neighbour merge fires in bulk.
+    SECTION("on the build plate")  { sliced_twice_matches(scaled(TestMesh::overhang, 4.f), 1); }
+    // Branches resting on the model are what put nodes in a part group other than 0, which is the
+    // only way to reach the prune in the second pass. tree_hybrid additionally builds polygon
+    // nodes, so it is the only style that exercises the overhang merge.
+    SECTION("resting on the model") { sliced_twice_matches(two_tier_mesh(), 0); }
+    SECTION("hybrid on the model")  { sliced_twice_matches(two_tier_mesh(), 0, "tree_hybrid"); }
+}
+
+// Prim breaks equal-distance ties by heap address. A 1 mm branch diameter puts neighbours close
+// enough to tie, and an explicit line width pins max_move_dist, so the moved tie winner reaches
+// the support toolpaths.
+TEST_CASE("Tree support toolpaths do not depend on the MST tie order", "[TreeSupport][Regression]")
+{
+    sliced_twice_matches(two_tier_mesh(), 0, "tree_hybrid", {
+        { "tree_support_branch_diameter", 1.0 },
+        { "tree_support_branch_distance", 5.0 },
+        { "tree_support_branch_angle",    40 },
+        { "support_line_width",           0.4 },
+    });
+}
diff --git a/tests/fff_print/test_wipe.cpp b/tests/fff_print/test_wipe.cpp
new file mode 100644
index 0000000000..46ee0d6441
--- /dev/null
+++ b/tests/fff_print/test_wipe.cpp
@@ -0,0 +1,653 @@
+#include <catch2/catch_all.hpp>
+
+#include <algorithm>
+#include <cmath>
+#include <map>
+#include <string>
+#include <string_view>
+#include <vector>
+
+#include "libslic3r/GCode/GCodeProcessor.hpp"
+#include "libslic3r/GCodeReader.hpp"
+#include "libslic3r/PrintConfig.hpp"
+#include "libslic3r/Layer.hpp"
+
+#include "test_helpers.hpp"
+
+using namespace Slic3r;
+using namespace Slic3r::Test;
+
+namespace {
+
+DynamicPrintConfig wipe_config(const char *wall_generator, bool wipe_inward,
+                               const char *wipe_inward_distance = "50%",
+                               const char *seam_gap = "10%", bool wipe_on_loops = false,
+                               const char *wall_loops = "2",
+                               const char *wall_sequence = "inner wall/outer wall",
+                               bool alternate_extra_wall = false,
+                               const char *sparse_infill_density = "0%",
+                               const char *seam_position = "aligned")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.set_deserialize_strict({
+        { "nozzle_diameter",             "0.4" },
+        { "layer_height",                "0.2" },
+        { "initial_layer_print_height",  "0.2" },
+        { "line_width",                  "0.45" },
+        { "outer_wall_line_width",       "0" }, // Orca: Auto must use the actual path width.
+        { "wall_loops",                  wall_loops },
+        { "wall_generator",              wall_generator },
+        { "wall_sequence",               wall_sequence },
+        { "top_shell_layers",            "0" },
+        { "bottom_shell_layers",         "0" },
+        { "sparse_infill_density",       sparse_infill_density },
+        { "seam_position",               seam_position },
+        { "seam_gap",                    seam_gap },
+        { "wipe",                        "1" },
+        { "wipe_distance",               "2" },
+        { "retraction_length",           "0.8" },
+        { "retract_when_changing_layer", "1" },
+        { "wipe_inward",                 wipe_inward ? "1" : "0" },
+        { "wipe_inward_distance",        wipe_inward_distance },
+        { "wipe_on_loops",               wipe_on_loops ? "1" : "0" },
+        { "alternate_extra_wall",        alternate_extra_wall ? "1" : "0" },
+        { "gcode_comments",              "1" },
+        { "machine_start_gcode",         "" },
+        { "machine_end_gcode",           "" },
+    });
+    return config;
+}
+
+struct WipeTrajectory {
+    Vec2d start;
+    double z;
+    std::vector<Vec2d> destinations;
+};
+
+std::vector<WipeTrajectory> wipe_trajectories(const std::string &gcode)
+{
+    const std::string &start_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_Start);
+    const std::string &end_tag   = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_End);
+    std::vector<WipeTrajectory> trajectories;
+    bool in_wipe = false;
+
+    GCodeReader parser;
+    parser.parse_buffer(gcode, [&](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+        const std::string_view comment = line.comment();
+        if (comment.find(start_tag) != std::string_view::npos) {
+            in_wipe = true;
+            trajectories.push_back({Vec2d(self.x(), self.y()), self.z(), {}});
+            return;
+        }
+        if (comment.find(end_tag) != std::string_view::npos) {
+            in_wipe = false;
+            return;
+        }
+        if (in_wipe && line.dist_XY(self) > EPSILON)
+            trajectories.back().destinations.emplace_back(line.new_X(self), line.new_Y(self));
+    });
+    return trajectories;
+}
+
+std::vector<Vec2d> wipe_destinations(const std::string &gcode)
+{
+    std::vector<Vec2d> destinations;
+    for (const WipeTrajectory &trajectory : wipe_trajectories(gcode))
+        destinations.insert(destinations.end(), trajectory.destinations.begin(), trajectory.destinations.end());
+    return destinations;
+}
+
+bool trajectories_differ(const std::vector<Vec2d> &lhs, const std::vector<Vec2d> &rhs)
+{
+    if (lhs.size() != rhs.size())
+        return true;
+    for (size_t i = 0; i < lhs.size(); ++i)
+        if ((lhs[i] - rhs[i]).norm() > 0.01)
+            return true;
+    return false;
+}
+
+double trajectory_length(const WipeTrajectory &trajectory)
+{
+    double length = 0.;
+    Vec2d previous = trajectory.start;
+    for (const Vec2d &destination : trajectory.destinations) {
+        length += (destination - previous).norm();
+        previous = destination;
+    }
+    return length;
+}
+
+} // namespace
+
+TEST_CASE("Wipe retraction preserves fractional speed with inward wipe disabled", "[Wipe][Regression]")
+{
+    const char *retraction_speed = GENERATE("25.25", "25.5", "25.75");
+    const char *relative_e = GENERATE("0", "1");
+    INFO("retraction speed: " << retraction_speed);
+    INFO("relative E: " << relative_e);
+    DynamicPrintConfig config = wipe_config("classic", false);
+    config.set_deserialize_strict({
+        {"gcode_flavor", "marlin2"},
+        {"use_relative_e_distances", relative_e},
+        {"retraction_speed", retraction_speed},
+        {"retraction_length", "0.8"},
+        {"retract_before_wipe", "0%"},
+        {"retract_after_wipe", "0%"},
+        {"role_based_wipe_speed", "0"},
+        {"wipe_speed", "100"},
+        {"wipe_distance", "2"},
+    });
+    const std::string output = slice({make_cube(10., 10., 1.)}, config);
+    const auto &start_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_Start);
+    const auto &end_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_End);
+    double before_wipe = 0.;
+    double during_wipe = 0.;
+    bool in_wipe = false;
+    bool complete = false;
+    GCodeReader parser;
+    parser.apply_config(config);
+    parser.parse_buffer(output, [&](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+        if (complete)
+            return;
+        if (line.comment().find(start_tag) != std::string_view::npos) {
+            in_wipe = true;
+        } else if (in_wipe && line.comment().find(end_tag) != std::string_view::npos) {
+            complete = true;
+        } else if (line.retracting(self)) {
+            (in_wipe ? during_wipe : before_wipe) -= line.dist_E(self);
+        } else if (line.extruding(self)) {
+            before_wipe = 0.;
+        }
+    });
+
+    REQUIRE(complete);
+    // At 100 mm/s, the 2 mm wipe lasts 0.02 seconds. The remaining part of
+    // the configured 0.8 mm retraction must be emitted before that wipe.
+    const double expected_during = std::stod(retraction_speed) * 2. / 100.;
+    CHECK_THAT(during_wipe, Catch::Matchers::WithinAbs(expected_during, 0.00005));
+    CHECK_THAT(before_wipe, Catch::Matchers::WithinAbs(0.8 - expected_during, 0.00005));
+}
+
+TEST_CASE("Inward wipe respects the minimum travel for retraction and Z hop", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const char *relative_e = GENERATE("0", "1");
+    const char *reduce_crossing_wall = GENERATE("0", "1");
+    const char *minimum_travel = GENERATE("5", "0");
+    CAPTURE(wall_generator, relative_e, reduce_crossing_wall, minimum_travel);
+    DynamicPrintConfig config = wipe_config(
+        wall_generator, true, "50%", "10%", false, "3", "inner-outer-inner wall");
+    config.set_deserialize_strict({
+        {"gcode_flavor", "marlin2"},
+        {"use_relative_e_distances", relative_e},
+        {"reduce_crossing_wall", reduce_crossing_wall},
+        {"retraction_minimum_travel", minimum_travel},
+        {"retract_when_changing_layer", "0"},
+        {"use_firmware_retraction", "0"},
+        {"retract_before_wipe", "0%"},
+        {"retract_after_wipe", "0%"},
+        {"retraction_speed", "25.5"},
+        {"role_based_wipe_speed", "0"},
+        {"wipe_speed", "100"},
+        {"z_hop", "0.4"},
+        {"retract_lift_above", "0"},
+        {"retract_lift_below", "0"},
+    });
+    config.set_key_value("z_hop_types", new ConfigOptionEnumsGeneric{zhtNormal});
+    config.set_key_value("retract_lift_enforce", new ConfigOptionEnumsGeneric{rletAllSurfaces});
+    const std::string output = slice({make_cube(10., 10., 1.)}, config);
+    const auto &role_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role);
+    const auto &start_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_Start);
+    const auto &end_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_End);
+    ExtrusionRole role = erNone;
+    bool after_outer_wall = false;
+    bool in_wipe = false;
+    size_t transitions = 0;
+    size_t same_layer_transitions = 0;
+    size_t inward_wipes = 0;
+    double retraction = 0.;
+    double lift = 0.;
+    double outer_z = 0.;
+    GCodeReader parser;
+    parser.apply_config(config);
+    parser.parse_buffer(output, [&](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+        if (line.comment().find(role_tag) == 0)
+            role = ExtrusionEntity::string_to_role(line.comment().substr(role_tag.size()));
+        if (line.comment().find(start_tag) == 0) {
+            in_wipe = true;
+            if (after_outer_wall)
+                ++inward_wipes;
+        } else if (line.comment().find(end_tag) == 0) {
+            in_wipe = false;
+        }
+        if (line.extruding(self) && line.dist_XY(self) > EPSILON) {
+            if (role == erExternalPerimeter) {
+                after_outer_wall = true;
+                retraction = lift = 0.;
+                outer_z = line.new_Z(self);
+            } else if (after_outer_wall) {
+                REQUIRE(role == erPerimeter);
+                ++transitions;
+                const double layer_rise = std::max(0., double(self.z()) - outer_z);
+                if (layer_rise < EPSILON)
+                    ++same_layer_transitions;
+                // A 5 mm threshold suppresses retraction across a few wall widths.
+                // A zero threshold still permits the ordinary retract and lift.
+                const bool retract = std::stod(minimum_travel) == 0.;
+                CHECK_THAT(retraction, Catch::Matchers::WithinAbs(retract ? 0.8 : 0., 0.00005));
+                // Exclude an ordinary layer change from the accumulated upward motion.
+                CHECK_THAT(lift - layer_rise, Catch::Matchers::WithinAbs(retract ? 0.4 : 0., 0.001));
+                after_outer_wall = false;
+            }
+        } else if (after_outer_wall) {
+            if (line.retracting(self))
+                retraction -= line.dist_E(self);
+            lift += std::max(0., double(line.dist_Z(self)));
+            if (in_wipe)
+                CHECK_THAT(line.dist_E(self), Catch::Matchers::WithinAbs(0., 0.00005));
+        }
+    });
+    // The 1 mm cube has five 0.2 mm layers: every outer wall must still wipe.
+    REQUIRE(transitions == 5);
+    REQUIRE(same_layer_transitions >= 4);
+    REQUIRE(inward_wipes == transitions);
+}
+
+TEST_CASE("Changing inward wipe settings preserves the sliced geometry", "[Wipe][Regression]")
+{
+    const char *key = GENERATE("wipe_inward", "wipe_inward_distance");
+    DynamicPrintConfig config = wipe_config("classic", false);
+    Print print;
+    Model model;
+    init_print({make_cube(10., 10., 1.)}, print, model, config);
+    gcode(print);
+    const PrintObject &object = *print.objects().front();
+    REQUIRE(object.is_step_done(posPerimeters));
+    REQUIRE(object.is_step_done(posInfill));
+    REQUIRE(print.is_step_done(psWipeTower));
+    REQUIRE(print.is_step_done(psGCodeExport));
+
+    DynamicPrintConfig changed = config;
+    changed.set_deserialize_strict({{key, std::string(key) == "wipe_inward" ? "1" : "75%"}});
+    print.apply(model, changed);
+
+    CHECK(print.objects().front()->is_step_done(posPerimeters));
+    CHECK(print.objects().front()->is_step_done(posInfill));
+    CHECK(print.is_step_done(psWipeTower));
+    CHECK_FALSE(print.is_step_done(psGCodeExport));
+}
+
+TEST_CASE("Retraction and pressure advance calibration suppress inward wipe overrides", "[Wipe][Regression]")
+{
+    const auto mode = GENERATE(CalibMode::Calib_None, CalibMode::Calib_PA_Tower,
+                              CalibMode::Calib_Auto_PA_Line, CalibMode::Calib_Retraction_tower,
+                              CalibMode::Calib_Flow_Rate);
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const bool per_object = GENERATE(false, true);
+    INFO("calibration mode: " << int(mode) << ", wall generator: " << wall_generator
+         << ", per-object override: " << per_object);
+
+    const auto trajectories = [&](bool inward) {
+        DynamicPrintConfig config = wipe_config(wall_generator, inward && !per_object);
+        const std::vector<std::vector<ConfigBase::SetDeserializeItem>> overrides{
+            {{"wipe_inward", inward ? "1" : "0"}}
+        };
+        Print print;
+        Model model;
+        init_print({make_cube(10., 10., 1.)}, print, model, config, per_object ? &overrides : nullptr);
+        Calib_Params params;
+        params.mode = mode;
+        params.start = 0.2;
+        params.end = 0.4;
+        params.step = 0.1;
+        print.set_calib_params(params);
+        return wipe_destinations(gcode(print));
+    };
+
+    const auto regular = trajectories(false);
+    const auto inward = trajectories(true);
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(inward.empty());
+    // Other calibration modes and ordinary prints must still honor the option.
+    const bool should_differ = mode == CalibMode::Calib_None || mode == CalibMode::Calib_Flow_Rate;
+    CHECK(trajectories_differ(regular, inward) == should_differ);
+}
+
+TEST_CASE("Inactive inward wipe settings preserve the exported trajectory", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const bool disable_wiping = GENERATE(false, true);
+    DynamicPrintConfig regular = wipe_config(wall_generator, false);
+    DynamicPrintConfig inward = wipe_config(wall_generator, true, disable_wiping ? "50%" : "0");
+    if (disable_wiping) {
+        regular.set_deserialize_strict({{"wipe", "0"}});
+        inward.set_deserialize_strict({{"wipe", "0"}});
+    }
+    const auto regular_paths = wipe_destinations(slice({make_cube(10., 10., 1.)}, regular));
+    const auto inward_paths = wipe_destinations(slice({make_cube(10., 10., 1.)}, inward));
+    if (!disable_wiping)
+        REQUIRE_FALSE(regular_paths.empty());
+    CHECK_FALSE(trajectories_differ(regular_paths, inward_paths));
+}
+
+TEST_CASE("Inward wipe changes the exported trajectory when outer wall width is Auto", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, false)));
+    const std::vector<Vec2d> inward = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, true)));
+
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(inward.empty());
+    REQUIRE(trajectories_differ(regular, inward));
+}
+
+TEST_CASE("Inward wipe recognizes an external wall starting on an overhang", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const bool inward = GENERATE(false, true);
+    CAPTURE(wall_generator, inward);
+    const auto config = wipe_config(wall_generator, inward, "50%", "0%", false,
+                                    "3", "inner-outer-inner wall", false, "0%", "back");
+    Print print;
+    Model model;
+    init_print({make_cube(10., 10., 1.)}, print, model, config);
+    print.process();
+    size_t mixed_loops = 0;
+    const auto mark_overhangs = [&](auto &&self, ExtrusionEntity *entity) -> void {
+        if (auto *collection = dynamic_cast<ExtrusionEntityCollection *>(entity)) {
+            for (ExtrusionEntity *child : collection->entities)
+                self(self, child);
+        } else if (auto *loop = dynamic_cast<ExtrusionLoop *>(entity); loop && is_external_perimeter(loop->role())) {
+            // Keep the printed geometry intact and give the back seam overhang
+            // roles. The front edge remains an ordinary external-wall segment.
+            ExtrusionPaths paths;
+            bool has_overhang = false;
+            bool has_external = false;
+            for (const ExtrusionPath &source : loop->paths) {
+                for (size_t i = 1; i < source.polyline.points.size(); ++i) {
+                    ExtrusionPath path = source;
+                    path.polyline.points = {source.polyline.points[i - 1], source.polyline.points[i]};
+                    const bool overhang = path.polyline.points.front().y() > 0 || path.polyline.points.back().y() > 0;
+                    path.set_extrusion_role(overhang ? erOverhangPerimeter : erExternalPerimeter);
+                    has_overhang |= overhang;
+                    has_external |= !overhang;
+                    paths.push_back(std::move(path));
+                }
+            }
+            REQUIRE(has_overhang);
+            REQUIRE(has_external);
+            loop->paths = std::move(paths);
+            ++mixed_loops;
+        }
+    };
+    for (const PrintObject *object : print.objects())
+        for (Layer *layer : object->layers())
+            for (LayerRegion *region : layer->regions())
+                mark_overhangs(mark_overhangs, &region->perimeters);
+    REQUIRE(mixed_loops > 0);
+
+    bool has_inward_wipe = false;
+    for (const WipeTrajectory &trajectory : wipe_trajectories(gcode(print))) {
+        if (trajectory.destinations.empty())
+            continue;
+        const Vec2d move = trajectory.destinations.front() - trajectory.start;
+        if (trajectory.start.x() > 4. && trajectory.start.y() > 4. && move.x() < -0.05 && move.y() < -0.05)
+            has_inward_wipe = true;
+    }
+    CHECK(has_inward_wipe == inward);
+}
+
+TEST_CASE("Inward wipe keeps its offset when seam gap is zero", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, false, "50%", "0%")));
+    const std::vector<Vec2d> inward = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, true, "50%", "0%")));
+
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(inward.empty());
+    REQUIRE(trajectories_differ(regular, inward));
+}
+
+TEST_CASE("Inward wipe is retained across layers with a back seam", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const DynamicPrintConfig inward_config = wipe_config(
+        wall_generator, true, "50%", "0%", false, "3", "inner-outer-inner wall", false, "0%", "back");
+    const std::vector<WipeTrajectory> inward = wipe_trajectories(slice({make_cube(27., 27., 1.)}, inward_config));
+
+    REQUIRE_FALSE(inward.empty());
+    std::map<double, bool> inward_wipe_by_layer;
+    for (const WipeTrajectory &trajectory : inward) {
+        bool &has_inward_wipe = inward_wipe_by_layer[trajectory.z];
+        if (trajectory.destinations.empty())
+            continue;
+        const Vec2d first_move = trajectory.destinations.front() - trajectory.start;
+        // Orca: a back seam lands on the cube's positive-X/positive-Y corner.
+        // Its inward wipe must move diagonally away from both external faces.
+        has_inward_wipe = has_inward_wipe ||
+            (trajectory.start.x() > 13. && trajectory.start.y() > 13. &&
+             first_move.x() < -0.05 && first_move.y() < -0.05);
+    }
+    REQUIRE(inward_wipe_by_layer.size() == 5);
+    for (const auto &[z, has_inward_wipe] : inward_wipe_by_layer) {
+        INFO("layer Z: " << z);
+        REQUIRE(has_inward_wipe);
+    }
+}
+
+TEST_CASE("Literal inward wipe distance is clamped to the outer wall width", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, false)));
+    const std::vector<Vec2d> full_width = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, true, "100%")));
+    const std::vector<Vec2d> oversized = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, true, "2")));
+
+    REQUIRE_FALSE(full_width.empty());
+    REQUIRE(trajectories_differ(regular, full_width));
+    REQUIRE(oversized.size() == full_width.size());
+    for (size_t i = 0; i < full_width.size(); ++i)
+        REQUIRE_THAT((oversized[i] - full_width[i]).norm(), Catch::Matchers::WithinAbs(0., 0.01));
+}
+
+TEST_CASE("Inward wipe is not applied without an adjacent wall", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, false, "50%", "10%", false, "1")));
+    const std::vector<Vec2d> inward = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(wall_generator, true, "50%", "10%", false, "1")));
+
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(trajectories_differ(regular, inward));
+}
+
+TEST_CASE("Inward wipe uses an alternate extra wall when the configured wall count is one", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const DynamicPrintConfig regular_config = wipe_config(
+        wall_generator, false, "50%", "10%", false, "1", "inner wall/outer wall", true, "15%");
+    const DynamicPrintConfig inward_config = wipe_config(
+        wall_generator, true, "50%", "10%", false, "1", "inner wall/outer wall", true, "15%");
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, regular_config));
+    const std::vector<Vec2d> inward = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, inward_config));
+
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(inward.empty());
+    REQUIRE(trajectories_differ(regular, inward));
+}
+
+TEST_CASE("Inward wipe is not applied before the adjacent wall is printed", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    INFO("wall generator: " << wall_generator);
+
+    const std::vector<Vec2d> regular = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(
+            wall_generator, false, "50%", "10%", false, "2", "outer wall/inner wall")));
+    const std::vector<Vec2d> inward = wipe_destinations(
+        slice({make_cube(10., 10., 1.)}, wipe_config(
+            wall_generator, true, "50%", "10%", false, "2", "outer wall/inner wall")));
+
+    REQUIRE_FALSE(regular.empty());
+    REQUIRE_FALSE(trajectories_differ(regular, inward));
+}
+
+TEST_CASE("Wipe on loops preserves the corner move with inward wipe disabled", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const char *nozzle_diameter = GENERATE("0.4", "0.8");
+    const char *comments = GENERATE("0", "1");
+    CAPTURE(comments);
+    INFO("wall generator: " << wall_generator << ", nozzle diameter: " << nozzle_diameter);
+    // A closed square gives a 90-degree material-side corner at the seam.
+    DynamicPrintConfig config = wipe_config(wall_generator, false, "50%", "0", true);
+    config.set_deserialize_strict({{"nozzle_diameter", nozzle_diameter}, {"seam_position", "nearest"},
+                                   {"gcode_comments", comments}});
+    const std::string output = slice({make_cube(10., 10., 1.)}, config);
+    const auto &role_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role);
+    const auto &wipe_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_Start);
+    ExtrusionRole role = erNone;
+    std::vector<Vec2d> loop;
+    bool after_extrusion = false;
+    size_t moves = 0;
+    GCodeReader parser;
+    parser.apply_config(config);
+    parser.parse_buffer(output, [&](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+        if (line.comment().find(role_tag) == 0) {
+            role = ExtrusionEntity::string_to_role(line.comment().substr(role_tag.size()));
+            loop.clear();
+            after_extrusion = false;
+        }
+        if (line.comment().find(wipe_tag) == 0)
+            after_extrusion = false;
+        if (role != erExternalPerimeter)
+            return;
+        if (line.extruding(self) && line.dist_XY(self) > EPSILON) {
+            if (loop.empty())
+                loop.emplace_back(self.x(), self.y());
+            loop.emplace_back(line.new_X(self), line.new_Y(self));
+            after_extrusion = true;
+            return;
+        }
+        // The loop move is the first non-extruding XY move after the external
+        // wall and before the reserved wipe marker, regardless of comment text.
+        if (!after_extrusion || line.dist_XY(self) <= EPSILON)
+            return;
+        after_extrusion = false;
+
+        ++moves;
+        INFO("layer Z: " << self.z());
+        REQUIRE(loop.size() >= 4);
+        const Vec2d seam = loop.front();
+        REQUIRE_THAT((loop.back() - seam).norm(), Catch::Matchers::WithinAbs(0., 0.003));
+        const Vec2d outgoing = (loop[1] - seam).normalized();
+        const Vec2d into_corner = (loop[loop.size() - 2] - seam).normalized();
+        REQUIRE_THAT(outgoing.dot(into_corner), Catch::Matchers::WithinAbs(0., 0.01));
+        const Vec2d move = Vec2d(line.new_X(self), line.new_Y(self)) - seam;
+        // The legacy corner move is 20% of the nozzle diameter, turned 30 degrees
+        // from the outgoing edge into the square. Check both components independently.
+        const double distance = 0.2 * std::stod(nozzle_diameter);
+        CHECK_THAT(move.dot(outgoing), Catch::Matchers::WithinAbs(distance * std::sqrt(3.) / 2., 0.003));
+        CHECK_THAT(move.dot(into_corner), Catch::Matchers::WithinAbs(distance / 2., 0.003));
+    });
+    REQUIRE(moves == 5);
+}
+
+TEST_CASE("Inward wipe remains valid after wipe on loops moves the nozzle", "[Wipe][Regression]")
+{
+    const char *wall_generator = GENERATE("classic", "arachne");
+    const char *comments = GENERATE("0", "1");
+    CAPTURE(comments);
+    INFO("wall generator: " << wall_generator);
+
+    DynamicPrintConfig config = wipe_config(wall_generator, false, "50%", "10%", true);
+    config.set_deserialize_strict({{"gcode_comments", comments}});
+    const std::string loop_move = slice({make_cube(10., 10., 1.)}, config);
+    config.set_deserialize_strict({{"wipe_inward", "1"}});
+    const std::string combined = slice({make_cube(10., 10., 1.)}, config);
+    config.set_deserialize_strict({{"wipe_on_loops", "0"}});
+    const std::string inward_only = slice({make_cube(10., 10., 1.)}, config);
+
+    for (const std::string *output : {&loop_move, &combined}) {
+        INFO("wipe_inward: " << (output == &combined));
+        std::map<double, std::vector<Vec2d>> loop_moves_by_layer;
+        const auto &role_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role);
+        const auto &wipe_tag = GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Wipe_Start);
+        ExtrusionRole role = erNone;
+        bool after_extrusion = false;
+        GCodeReader parser;
+        parser.apply_config(config);
+        parser.parse_buffer(*output, [&](GCodeReader &self, const GCodeReader::GCodeLine &line) {
+            if (line.comment().find(role_tag) == 0) {
+                role = ExtrusionEntity::string_to_role(line.comment().substr(role_tag.size()));
+                after_extrusion = false;
+            }
+            if (line.comment().find(wipe_tag) == 0)
+                after_extrusion = false;
+            if (role != erExternalPerimeter || line.dist_XY(self) <= EPSILON)
+                return;
+            if (line.extruding(self)) {
+                after_extrusion = true;
+            } else if (after_extrusion) {
+                loop_moves_by_layer[line.new_Z(self)].emplace_back(line.new_X(self), line.new_Y(self));
+                after_extrusion = false;
+            }
+        });
+
+        // The 1 mm cube at 0.2 mm layer height has one external loop on each of five layers.
+        const auto trajectories = wipe_trajectories(*output);
+        REQUIRE(loop_moves_by_layer.size() == 5);
+        for (size_t layer = 1; layer <= 5; ++layer) {
+            const double z = layer * 0.2;
+            const auto moves = std::find_if(loop_moves_by_layer.begin(), loop_moves_by_layer.end(),
+                [z](const auto &entry) { return std::abs(entry.first - z) < 0.001; });
+            REQUIRE(moves != loop_moves_by_layer.end());
+            REQUIRE(moves->second.size() == 1);
+            const auto wipe = std::find_if(trajectories.begin(), trajectories.end(), [&](const WipeTrajectory &trajectory) {
+                return std::abs(trajectory.z - z) < 0.001 &&
+                       (trajectory.start - moves->second.front()).norm() < 0.001;
+            });
+            REQUIRE(wipe != trajectories.end());
+            // The configured 2 mm wipe must be measured from the inward move's
+            // endpoint, including when wipe_inward is off (set_last_pos regression).
+            CHECK_THAT(trajectory_length(*wipe), Catch::Matchers::WithinAbs(2., 0.003));
+        }
+    }
+
+    const std::vector<WipeTrajectory> combined_trajectories = wipe_trajectories(combined);
+    const std::vector<WipeTrajectory> inward_trajectories = wipe_trajectories(inward_only);
+    REQUIRE_FALSE(combined_trajectories.empty());
+    REQUIRE(combined_trajectories.size() == inward_trajectories.size());
+    REQUIRE(trajectories_differ(wipe_destinations(combined), wipe_destinations(loop_move)));
+
+    bool start_changed = false;
+    for (size_t i = 0; i < combined_trajectories.size(); ++i) {
+        start_changed = start_changed ||
+            (combined_trajectories[i].start - inward_trajectories[i].start).norm() > 0.01;
+        REQUIRE_THAT(trajectory_length(combined_trajectories[i]),
+                     Catch::Matchers::WithinAbs(trajectory_length(inward_trajectories[i]), 0.01));
+    }
+    REQUIRE(start_changed);
+}
diff --git a/tests/fff_print/test_wipe_tower.cpp b/tests/fff_print/test_wipe_tower.cpp
index 2bd7ac4189..24d50d6e66 100644
--- a/tests/fff_print/test_wipe_tower.cpp
+++ b/tests/fff_print/test_wipe_tower.cpp
@@ -152,6 +152,8 @@ static DynamicPrintConfig wipe_tower_toolchange_config(const std::string &gcode_
         { "outer_wall_filament_id",     2 },
         { "inner_wall_filament_id",     2 },
         { "enable_prime_tower",         true },
+        { "wipe_tower_x",               50 }, // inside the 200x200 test bed
+        { "wipe_tower_y",               50 }, // (the default y, 220, is not)
         { "layer_height",               0.3 },
         { "gcode_flavor",               gcode_flavor },
     });
@@ -182,3 +184,148 @@ TEST_CASE("The wipe tower's toolchange planner flush follows the gcode flavor",
         CHECK_THAT(tower, !Catch::Matchers::ContainsSubstring(unexpected));
     }
 }
+
+// What Print feeds the shared estimate. The libslic3r WipeTowerEstimate cases cannot see this:
+// they call the estimator directly. The estimate counts the filaments the print really uses,
+// so the two-filament shape gives the outer wall the second one.
+static DynamicPrintConfig tower_estimate_config(const char *wall_type, unsigned int filaments = 2)
+{
+    // 100 mm3 per purge on a 50 mm wide tower: one purge is 100/(layer_height * 50) of depth.
+    return multifilament_config(filaments, {
+        { "outer_wall_filament_id",         filaments == 2 ? "2" : "1" },
+        { "enable_prime_tower",             "1"       },
+        { "wipe_tower_wall_type",           wall_type },
+        { "prime_tower_width",              "50"      },
+        { "prime_volume",                   "100"     },
+        { "prime_tower_infill_gap",         "100%"    },
+        { "prime_tower_brim_width",         "3"       },
+        { "purge_in_prime_tower",           "0"       },
+        { "single_extruder_multi_material", "0"       },
+        { "timelapse_type",                 "0"       },
+        { "layer_height",                   "0.2"     },
+        { "enable_wrapping_detection",      "0"       },
+        { "raft_layers",                    "0"       } });
+}
+
+TEST_CASE("The tower is sized for the thinnest layer any object on the plate is sliced at", "[WipeTower]")
+{
+    // The tower has to survive its thinnest layer, so an override finer than the preset drives
+    // the estimate even on the second object. Two 20 mm cubes, the second at 0.1 mm.
+    const DynamicPrintConfig config = tower_estimate_config("rectangle");
+    const std::vector<std::vector<ConfigBase::SetDeserializeItem>> overrides = {
+        {}, { { "layer_height", "0.1" } } };
+
+    Print print;
+    Model model;
+    init_print({ cube(20), cube(20) }, print, model, config, &overrides);
+
+    // One purge at 0.1 mm: 100 / (0.1 * 50) = 20 mm, above the 20 mm-tall tower's stability
+    // floor. At the preset's 0.2 mm it would be half that, so the two are easy to tell apart.
+    const float floor_20mm = WipeTower::get_limit_depth_by_height(20.f);
+    REQUIRE(floor_20mm < 10.f);
+    CHECK_THAT(print.wipe_tower_data(2).depth, Catch::Matchers::WithinAbs(20., 1e-4));
+}
+
+TEST_CASE("Validation is given the tower's effective width, not the configured one", "[WipeTower]")
+{
+    // A rib wall squares the tower, so its width is its depth. Validation reads this rather
+    // than re-deriving the rule from the wall type.
+    Print print;
+    Model model;
+
+    SECTION("a rectangle wall keeps the configured width") {
+        const DynamicPrintConfig config = tower_estimate_config("rectangle");
+        init_print({ cube(20) }, print, model, config);
+        const WipeTowerData &data = print.wipe_tower_data(2);
+        CHECK_THAT(data.width, Catch::Matchers::WithinAbs(50., 1e-4));
+        CHECK(data.depth < data.width);
+    }
+
+    SECTION("a rib wall reports the squared footprint") {
+        const DynamicPrintConfig config = tower_estimate_config("rib");
+        init_print({ cube(20) }, print, model, config);
+        const WipeTowerData &data = print.wipe_tower_data(2);
+        CHECK_THAT(data.width, Catch::Matchers::WithinAbs(data.depth, 1e-4));
+        CHECK(data.width > 0.f);
+    }
+}
+
+TEST_CASE("Generating the tower keeps its reported width current", "[WipeTower]")
+{
+    // width is handed out after the slice, so leaving it at the estimate reports a zero-width
+    // tower to every post-generation consumer.
+    const DynamicPrintConfig config = wipe_tower_toolchange_config("marlin");
+    Print print;
+    Model model;
+    init_print({ cube(10) }, print, model, config);
+    print.apply(model, config);
+    REQUIRE(print.wipe_tower_data(2).width > 0.f);
+
+    print.process();
+    REQUIRE(print.is_step_done(psWipeTower));
+    const WipeTowerData &data = print.wipe_tower_data();
+    // A width the generator never wrote reads as zero. A rib wall squares the tower, so the
+    // generated width is the body square: under the configured 50 mm, and inside the depth.
+    CHECK(data.width > 0.f);
+    CHECK(data.width < 50.f);
+    CHECK(data.width <= data.depth + EPSILON);
+}
+
+TEST_CASE("A single-filament plate reserves a tower only when one is actually printed", "[WipeTower]")
+{
+    // The estimate has to answer this the way Print::apply does: reporting no tower for one
+    // that is built collapses the validation hull to a point, and reporting one for a tower
+    // that is not built takes that bed area away from the arranger and draws a preview box
+    // over nothing.
+    Print print;
+    Model model;
+
+    SECTION("no tool change and nothing else that prints one") {
+        const DynamicPrintConfig config = tower_estimate_config("rib", 1);
+        init_print({ cube(20) }, print, model, config);
+        REQUIRE_FALSE(print.has_wipe_tower());
+        CHECK_THAT(print.wipe_tower_data(1).depth, Catch::Matchers::WithinAbs(0., 1e-6));
+    }
+
+    // A raft puts the tower on every layer below the object, but only where there is a tower:
+    // Print::apply runs normalize_fdm_2, which clears enable_prime_tower for a plate that
+    // purges one filament and has neither smooth timelapse nor wrapping detection on.
+    SECTION("a raft alone does not print one") {
+        DynamicPrintConfig config = tower_estimate_config("rib", 1);
+        config.set_deserialize_strict({ { "raft_layers", "3" } });
+        init_print({ cube(20) }, print, model, config);
+        REQUIRE_FALSE(print.config().enable_prime_tower.value);
+        REQUIRE_FALSE(print.has_wipe_tower());
+        CHECK_THAT(print.wipe_tower_data(1).depth, Catch::Matchers::WithinAbs(0., 1e-6));
+    }
+
+    SECTION("smooth timelapse prints one, and keeps enable_prime_tower on") {
+        DynamicPrintConfig config = tower_estimate_config("rib", 1);
+        config.set_deserialize_strict({ { "timelapse_type", "1" } });
+        init_print({ cube(20) }, print, model, config);
+        REQUIRE(print.has_wipe_tower());
+        CHECK(print.wipe_tower_data(1).depth > 0.f);
+    }
+}
+
+TEST_CASE("A tower printed without a tool change is still validated against the bed", "[WipeTower]")
+{
+    // Wrapping detection prints a tower on a plate that purges one filament. Neither the old
+    // estimate (which read the wall type and smooth timelapse) nor the old containment gate (the
+    // filament count or smooth timelapse) knew about it, so between them that tower was never
+    // checked against the bed.
+    Print print;
+    Model model;
+    DynamicPrintConfig config = tower_estimate_config("rectangle", 1);
+    // Relative E without a per-layer G92 is rejected before the tower is ever looked at, and
+    // has_wipe_tower() wants a real exclusion polygon before it honours wrapping detection.
+    config.set_deserialize_strict({ { "enable_wrapping_detection", "1" },
+                                    { "wrapping_exclude_area", "180x180,190x180,190x190,180x190" },
+                                    { "wipe_tower_x", "500" }, { "wipe_tower_y", "500" },                                    { "use_relative_e_distances", "0" } });
+
+    init_print({ cube(20) }, print, model, config);
+    REQUIRE(print.extruders(true).size() == 1);
+    REQUIRE(print.has_wipe_tower());
+    CHECK(print.wipe_tower_data(1).depth > 0.f);
+    CHECK_THAT(print.validate().string, Catch::Matchers::ContainsSubstring("printable area"));
+}
diff --git a/tests/libslic3r/CMakeLists.txt b/tests/libslic3r/CMakeLists.txt
index 404fc9653f..185dce37da 100644
--- a/tests/libslic3r/CMakeLists.txt
+++ b/tests/libslic3r/CMakeLists.txt
@@ -19,6 +19,7 @@ add_executable(${_TEST_NAME}_tests
     test_preset_setting_id.cpp
     test_preset_diff.cpp
     test_vendor_cache.cpp
+    test_preset_options.cpp
     test_elephant_foot_compensation.cpp
     test_fill_corner_smoothing.cpp
     test_filament_mixer.cpp
@@ -29,16 +30,21 @@ add_executable(${_TEST_NAME}_tests
     test_polygon.cpp
     test_mutable_polygon.cpp
     test_mutable_priority_queue.cpp
+    test_minimum_spanning_tree.cpp
     test_nozzle_volume_type.cpp
     test_step.cpp
     test_stl.cpp
     test_triangle_selector.cpp
     test_meshboolean.cpp
     test_marchingsquares.cpp
+    test_lay_on_face.cpp
     test_model.cpp
     test_utils.cpp
     test_timeutils.cpp
     test_voronoi.cpp
+    test_wipe_tower_estimate.cpp
+    test_wipe_tower.cpp
+    test_wipe_path.cpp
     test_optimizers.cpp
     test_ordering_strategies.cpp
     # test_png_io.cpp
diff --git a/tests/libslic3r/test_3mf.cpp b/tests/libslic3r/test_3mf.cpp
index 1bf8944b51..02d392140b 100644
--- a/tests/libslic3r/test_3mf.cpp
+++ b/tests/libslic3r/test_3mf.cpp
@@ -1,6 +1,5 @@
 
 #include "libslic3r/Model.hpp"
-#include "libslic3r/TriangleSelector.hpp"
 #include "libslic3r/Format/3mf.hpp"
 #include "libslic3r/Format/bbs_3mf.hpp"
 #include "libslic3r/Format/STL.hpp"
@@ -11,9 +10,12 @@
 #include "libslic3r/Preset.hpp"
 #include "libslic3r/MultiNozzleUtils.hpp"
 #include "libslic3r/ProjectTask.hpp"
+#include "libslic3r/PublishSettings.hpp"
 
 #include "test_utils.hpp"
 
+#include <nlohmann/json.hpp>
+
 #include <boost/filesystem/operations.hpp>
 #include <boost/algorithm/string/predicate.hpp>
 #include <algorithm>
@@ -733,7 +735,6 @@ SCENARIO("Nozzle-group metadata .3mf round-trip", "[3mf][MultiNozzle]") {
     }
 }
 
-
 // A mixed-color filament occupies an ordinary filament slot, and painting with it stores an
 // ordinary extruder state: a project saved by BambuStudio encodes filament 5 of a 5-slot setup
 // as paint state 5, with the mix described by the parallel filament_mixed_* project arrays.
@@ -824,3 +825,639 @@ SCENARIO("Mixed-color filament setup and painting round-trip through a .3mf", "[
         }
     }
 }
+// Locks the serialization contract of the "Publish" metadata: the orca_published flag and the
+// orca_published_keys JSON array in model.model_info->metadata_items must survive a store_bbs_3mf ->
+// load_bbs_3mf round-trip unchanged. (The full preset-preservation behavior is exercised
+// headlessly in test_preset_bundle_loading.cpp.)
+SCENARIO("Published 3MF round-trips the published flag and published_keys metadata", "[3mf]") {
+    GIVEN("a model carrying published metadata") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+
+        model.model_info = std::make_shared<ModelInfo>();
+        model.model_info->metadata_items[ORCA_PUBLISHED_TAG]      = "1";
+        model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] = R"(["layer_height","wall_thickness"])";
+
+        // store_bbs_3mf stages project_settings.config through the model's backup path; point
+        // it at a writable temp dir (the default lives under a read-only root in CI).
+        ScopedTemporaryDir backup_dir("orca_pub");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored to and reloaded from a .3mf") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            StoreParams store_params;
+            store_params.path    = test_file.c_str();
+            store_params.model   = &model;
+            store_params.config  = &config;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> project_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &project_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("the published metadata round-trips unchanged") {
+                REQUIRE(loaded);
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_TAG] == "1");
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] == R"(["layer_height","wall_thickness"])");
+
+                // The orca_published_keys value is a JSON array of setting keys; it must parse back to
+                // the same keys that were selected.
+                nlohmann::json keys = nlohmann::json::parse(dst_model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG]);
+                REQUIRE(keys.is_array());
+                REQUIRE(keys.size() == 2);
+                REQUIRE(keys[0] == "layer_height");
+                REQUIRE(keys[1] == "wall_thickness");
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+// A normal 3MF (no Publish metadata) must load identically: the loader must not fabricate a
+// "orca_published" flag or orca_published_keys for files that never carried them.
+SCENARIO("Legacy 3MF without published metadata loads unchanged", "[3mf]") {
+    GIVEN("a model without any published metadata") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+
+        ScopedTemporaryDir backup_dir("orca_legacy");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored to and reloaded from a .3mf") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            StoreParams store_params;
+            store_params.path    = test_file.c_str();
+            store_params.model   = &model;
+            store_params.config  = &config;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> project_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &project_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("no published key is fabricated") {
+                REQUIRE(loaded);
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items.count(ORCA_PUBLISHED_TAG) == 0);
+                REQUIRE(dst_model.model_info->metadata_items.count(ORCA_PUBLISHED_KEYS_TAG) == 0);
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+// Locks the serialization contract of the orca_published_material_keys metadata: the per-entry JSON
+// must survive a store_bbs_3mf -> load_bbs_3mf round-trip verbatim, exactly like orca_published_keys.
+SCENARIO("Published 3MF round-trips the published_material_keys metadata", "[3mf]") {
+    GIVEN("a model carrying published material keys metadata") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+
+        const std::string material_keys_json =
+            R"([{"material":{"filament_type":"PLA","filament_vendor":"Generic","filament_id":"GFL99"},"slot":0,"keys":["filament_retraction_length","filament_z_hop"]}])";
+
+        model.model_info = std::make_shared<ModelInfo>();
+        model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] = material_keys_json;
+
+        ScopedTemporaryDir backup_dir("orca_pub_mat");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored to and reloaded from a .3mf") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            StoreParams store_params;
+            store_params.path    = test_file.c_str();
+            store_params.model   = &model;
+            store_params.config  = &config;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> project_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &project_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("the published material keys metadata round-trips unchanged") {
+                REQUIRE(loaded);
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] == material_keys_json);
+
+                // The value must parse back to one material entry carrying the nested identity
+                // object, the author slot ordinal and the key list.
+                nlohmann::json entries = nlohmann::json::parse(material_keys_json);
+                REQUIRE(entries.is_array());
+                REQUIRE(entries.size() == 1);
+                REQUIRE(entries[0]["material"]["filament_type"] == "PLA");
+                REQUIRE(entries[0]["material"]["filament_vendor"] == "Generic");
+                REQUIRE(entries[0]["material"]["filament_id"] == "GFL99");
+                REQUIRE(entries[0]["slot"] == 0);
+                REQUIRE(entries[0]["keys"].is_array());
+                REQUIRE(entries[0]["keys"].size() == 2);
+                REQUIRE(entries[0]["keys"][0] == "filament_retraction_length");
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+SCENARIO("Minimal published 3MF omits project config, preset dumps and slicer tags", "[3mf]") {
+    GIVEN("a multi-instance model carrying published metadata and a published_config payload") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+        // A second instance: tag-less third-party files get their multi-instance objects split,
+        // published files must not (the loader recognizes them by their metadata).
+        model.objects.front()->add_instance();
+
+        DynamicPrintConfig full_cfg = DynamicPrintConfig::full_print_config();
+        full_cfg.set_key_value("layer_height", new ConfigOptionFloat(0.24));
+        full_cfg.set_key_value("retraction_length", new ConfigOptionFloats({ 1.2 }));
+
+        const std::vector<std::string> published_keys = { "layer_height", "retraction_length" };
+        const std::vector<PublishedMaterialEntry> material_keys = {
+            { "PLA", "Generic", "GFL99", "", "Generic PLA", 0, { "filament_retraction_length" } }
+        };
+
+        // The payload builder keeps the published and identity keys and drops everything else.
+        DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, published_keys, material_keys);
+        REQUIRE(filtered_cfg.option("layer_height") != nullptr);
+        REQUIRE(filtered_cfg.option("retraction_length") != nullptr);
+        REQUIRE(filtered_cfg.option("filament_colour") != nullptr);
+        REQUIRE(filtered_cfg.option("filament_type") != nullptr);
+        REQUIRE(filtered_cfg.option("wipe_tower_x") != nullptr);
+        REQUIRE(filtered_cfg.option("sparse_infill_density") == nullptr);
+        REQUIRE(filtered_cfg.option("machine_start_gcode") == nullptr);
+
+        // Serialize the payload exactly like export_published_3mf does.
+        std::string payload;
+        for (const std::string &key : filtered_cfg.keys())
+            payload += key + " = " + filtered_cfg.opt_serialize(key) + "\n";
+
+        model.model_info = std::make_shared<ModelInfo>();
+        model.model_info->metadata_items[ORCA_PUBLISHED_TAG]      = "1";
+        model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] = R"(["layer_height","retraction_length"])";
+        model.model_info->metadata_items[ORCA_PUBLISHED_CONFIG_TAG] = payload;
+
+        ScopedTemporaryDir backup_dir("orca_min_pub");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored using SaveStrategy::MinimalPublished and reloaded") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            // Create a fake project preset to verify MinimalPublished omits it.
+            Preset preset(Preset::TYPE_PRINT, "TestPrintPreset");
+            preset.config = full_cfg;
+            std::vector<Preset*> project_presets = { &preset };
+
+            StoreParams store_params;
+            store_params.path    = test_file.c_str();
+            store_params.model   = &model;
+            store_params.config  = &filtered_cfg;
+            store_params.project_presets = project_presets;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence | SaveStrategy::MinimalPublished;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            ScopedTemporaryDir loaded_backup_dir("orca_min_pub_loaded");
+            dst_model.set_backup_path(loaded_backup_dir.string());
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> loaded_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &loaded_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("the 3MF loads without project config or embedded presets") {
+                REQUIRE(loaded);
+                REQUIRE(dst_config.empty());
+                REQUIRE(loaded_presets.empty());
+            }
+            THEN("the file carries no slicer tags and classifies as a generic 3MF") {
+                REQUIRE_FALSE(is_bbl_3mf);
+                REQUIRE_FALSE(is_orca_3mf);
+                // No Application / OrcaSlicer tag: old receivers import the geometry silently
+                // instead of showing a baked-in, wrong "old version" popup.
+                REQUIRE_FALSE(file_version.valid());
+            }
+            THEN("the geometry keeps BBS-grade handling: instances are not split") {
+                REQUIRE(dst_model.objects.size() == 1);
+                REQUIRE(dst_model.objects.front()->instances.size() == 2);
+            }
+            THEN("the published metadata and payload round-trip unchanged") {
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_TAG] == "1");
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] == R"(["layer_height","retraction_length"])");
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_CONFIG_TAG] == payload);
+            }
+            THEN("the payload parses back to the published values") {
+                DynamicPrintConfig parsed_payload;
+                parsed_payload.load_from_ini_string(dst_model.model_info->metadata_items[ORCA_PUBLISHED_CONFIG_TAG], ForwardCompatibilitySubstitutionRule::Enable);
+                REQUIRE(parsed_payload.option("layer_height") != nullptr);
+                REQUIRE_THAT(parsed_payload.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.24, 1e-6));
+                REQUIRE(parsed_payload.option("retraction_length") != nullptr);
+                REQUIRE_THAT(parsed_payload.opt<ConfigOptionFloats>("retraction_length")->get_at(0), Catch::Matchers::WithinAbs(1.2, 1e-6));
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+// A minimal published 3MF must not leak the slicer tags of the source project. The exporter seeds
+// metadata_item_map from the input file's metadata_items, so re-publishing a project opened from a
+// regular Orca/BBS 3MF (the typical remix flow) must strip the Application / OrcaSlicer tags it
+// came with, otherwise old receivers route onto the baked-in "old version" popup.
+SCENARIO("MinimalPublished strips slicer tags carried by the source project", "[3mf]") {
+    GIVEN("a model loaded from a regular Orca/BBS 3MF whose metadata carries the slicer tags") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+
+        model.model_info = std::make_shared<ModelInfo>();
+        model.model_info->metadata_items[ORCA_PUBLISHED_TAG] = "1";
+        model.model_info->metadata_items["Application"]     = "BambuStudio-2.0.0";
+        model.model_info->metadata_items["OrcaSlicer"]      = "2.1.0";
+
+        ScopedTemporaryDir backup_dir("orca_strip_tags");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored using SaveStrategy::MinimalPublished and reloaded") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            StoreParams store_params;
+            store_params.path    = test_file.c_str();
+            store_params.model   = &model;
+            store_params.config  = &config;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence | SaveStrategy::MinimalPublished;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> loaded_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &loaded_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("the source slicer tags are stripped, not carried through") {
+                REQUIRE(loaded);
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items.count("Application") == 0);
+                REQUIRE(dst_model.model_info->metadata_items.count("OrcaSlicer") == 0);
+                // The published marker itself must survive.
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_TAG] == "1");
+            }
+            THEN("the file classifies as a generic 3MF without a version popup") {
+                REQUIRE_FALSE(is_bbl_3mf);
+                REQUIRE_FALSE(is_orca_3mf);
+                REQUIRE_FALSE(file_version.valid());
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+// An entry masks the non-published slots to their defaults so publishing slot 1 never leaks slot
+// 0's value into the file. Both a full entry (the whole-slot key list) and a partial entry (a
+// per-slot key) go through the same masking path in filter_published_config (keys and full_keys
+// are filtered identically), so the two forms are exercised together.
+SCENARIO("Published entries mask the other slots to their defaults", "[3mf]") {
+    const bool full = GENERATE(true, false);
+    GIVEN("a full print configuration with two filament slots") {
+        DynamicPrintConfig full_cfg = DynamicPrintConfig::full_print_config();
+        full_cfg.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        full_cfg.opt<ConfigOptionStrings>("filament_colour")->values = { "#111111", "#222222" };
+        // filament_flow_ratio carries a non-empty option default (1.0) of the same type, so the
+        // mask can restore it on the non-published slot.
+        full_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio", true)->values = { 1.02, 0.98 };
+
+        WHEN("filtering with a published entry for slot 1") {
+            PublishedMaterialEntry entry;
+            entry.slot = 1;
+            if (full) {
+                entry.full      = true;
+                entry.full_keys = { "filament_flow_ratio" };
+            } else {
+                entry.keys = { "filament_flow_ratio" };
+            }
+            DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, {}, { entry });
+
+            THEN("the selected key is present with the author's slot value") {
+                REQUIRE(filtered_cfg.option("filament_flow_ratio") != nullptr);
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio")->values[1], Catch::Matchers::WithinAbs(0.98, 1e-6));
+            }
+            THEN("the non-published slot is masked to its default") {
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio")->values[0], Catch::Matchers::WithinAbs(1.0, 1e-6));
+            }
+            THEN("the identity keys stay present") {
+                REQUIRE(filtered_cfg.option("filament_colour") != nullptr);
+            }
+        }
+    }
+}
+
+// A key needing slot masking that cannot be masked (no registered option default of the same
+// type) is dropped from the payload entirely instead of shipping the author's whole vector.
+SCENARIO("Unmaskable keys are dropped from the published payload instead of leaking", "[3mf]") {
+    GIVEN("a config carrying a synthetic def-less vector key and a maskable one") {
+        DynamicPrintConfig full_cfg = DynamicPrintConfig::full_print_config();
+        full_cfg.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        full_cfg.opt<ConfigOptionStrings>("filament_colour")->values  = { "#111111", "#222222" };
+        // Not a PrintConfig key: print_config_def has no default to mask with.
+        full_cfg.set_key_value("orca_synthetic_setting", new ConfigOptionFloats({ 9.9, 8.8 }));
+        full_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio", true)->values = { 1.02, 0.98 };
+
+        PublishedMaterialEntry partial_entry;
+        partial_entry.slot = 1;
+        partial_entry.keys = { "orca_synthetic_setting", "filament_flow_ratio" };
+
+        WHEN("filtering with a partial entry for slot 1") {
+            DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, {}, { partial_entry });
+
+            THEN("the unmaskable synthetic key is not published") {
+                REQUIRE(filtered_cfg.option("orca_synthetic_setting") == nullptr);
+            }
+            THEN("the maskable key is present, author slot kept, other slot masked") {
+                REQUIRE(filtered_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio") != nullptr);
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio")->values[1], Catch::Matchers::WithinAbs(0.98, 1e-6));
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloatsNullable>("filament_flow_ratio")->values[0], Catch::Matchers::WithinAbs(1.0, 1e-6));
+            }
+            THEN("the identity keys stay present") {
+                REQUIRE(filtered_cfg.option("filament_colour") != nullptr);
+            }
+        }
+    }
+}
+
+// A per-extruder printer key carrying a "#N" variant (e.g. retraction_length#1) must not serialize
+// every extruder's value: the base is masked to the author's extruder and the other slots are
+// restored to their option default, matching the material-side slot-masking invariant. A bare
+// printer base key (no variant) keeps whole-vector serialization.
+SCENARIO("Published per-extruder printer keys mask the other extruders to their defaults", "[3mf]") {
+    GIVEN("a full print configuration with three extruders carrying per-extruder retraction values") {
+        DynamicPrintConfig full_cfg = DynamicPrintConfig::full_print_config();
+        // Non-default values on the un-selected slots, so a leak is distinguishable from the mask
+        // restoring the option default (retraction_length defaults to {0.8}).
+        full_cfg.opt<ConfigOptionFloats>("retraction_length")->values = { 3.0, 1.2, 4.0 };
+
+        WHEN("filtering with only extruder 1's retraction_length checked") {
+            DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, { "retraction_length#1" }, {});
+
+            THEN("the author's extruder value survives") {
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[1], Catch::Matchers::WithinAbs(1.2, 1e-6));
+            }
+            THEN("the other extruders are masked to their default") {
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[0], Catch::Matchers::WithinAbs(0.8, 1e-6));
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[2], Catch::Matchers::WithinAbs(0.8, 1e-6));
+            }
+        }
+        WHEN("filtering the bare base key without a '#N' variant") {
+            DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, { "retraction_length" }, {});
+
+            THEN("the whole vector is serialized unmasked") {
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[0], Catch::Matchers::WithinAbs(3.0, 1e-6));
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[1], Catch::Matchers::WithinAbs(1.2, 1e-6));
+                REQUIRE_THAT(filtered_cfg.opt<ConfigOptionFloats>("retraction_length")->values[2], Catch::Matchers::WithinAbs(4.0, 1e-6));
+            }
+        }
+    }
+}
+
+// The extended per-entry fields (full dump list, published type and colour) travel inside the
+// published_material_keys metadata and round-trip unchanged.
+SCENARIO("Published 3MF round-trips the extended material metadata", "[3mf]") {
+    GIVEN("a model carrying extended published material keys metadata") {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+
+        const std::string material_keys_json =
+            R"([{"material":{"filament_type":"PLA","filament_vendor":"Generic","filament_id":"GFL99","setting_id":"RFs9eCKYOMUSmvZf","name":"Generic PLA Matte @System"},"slot":1,"keys":[],"full":true,"full_keys":["filament_retraction_length","filament_colour"],"publish_type":true,"type":"PLA","publish_color":false,"color":""}])";
+
+        model.model_info = std::make_shared<ModelInfo>();
+        model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] = material_keys_json;
+
+        ScopedTemporaryDir backup_dir("orca_pub_mat2");
+        model.set_backup_path(backup_dir.string());
+
+        WHEN("stored to and reloaded from a .3mf") {
+            ScopedTemporaryFile temp(".3mf");
+            const std::string test_file = temp.string();
+
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            StoreParams store_params;
+            store_params.path     = test_file.c_str();
+            store_params.model    = &model;
+            store_params.config   = &config;
+            store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+            REQUIRE(store_bbs_3mf(store_params));
+
+            Model dst_model;
+            DynamicPrintConfig dst_config;
+            ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+            PlateDataPtrs        dst_plates;
+            std::vector<Preset*> project_presets;
+            bool   is_bbl_3mf = false, is_orca_3mf = false;
+            Semver file_version;
+            bool loaded = load_bbs_3mf(test_file.c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                       &project_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                       LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+            THEN("the extended material metadata round-trips unchanged") {
+                REQUIRE(loaded);
+                REQUIRE(dst_model.model_info != nullptr);
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_MATERIAL_TAG] == material_keys_json);
+
+                // The value must parse back with every extended field intact.
+                nlohmann::json entries = nlohmann::json::parse(material_keys_json);
+                REQUIRE(entries.is_array());
+                REQUIRE(entries.size() == 1);
+                REQUIRE(entries[0]["full"].get<bool>() == true);
+                REQUIRE(entries[0]["full_keys"].is_array());
+                REQUIRE(entries[0]["full_keys"].size() == 2);
+                REQUIRE(entries[0]["publish_type"].get<bool>() == true);
+                REQUIRE(entries[0]["type"] == "PLA");
+                REQUIRE(entries[0]["publish_color"].get<bool>() == false);
+            }
+            release_PlateData_list(dst_plates);
+        }
+    }
+}
+
+// A published mixed filament serializes its whole definition (components, ratios, gradient)
+// masked to the author's slot: the mix slot's values survive, the non-published slots reset to
+// their defaults, so a partial publish never leaks another slot's mix data.
+SCENARIO("Published mixed-filament keys are masked to the author's slot", "[3mf]") {
+    GIVEN("a full print configuration with three slots, one of them mixed") {
+        DynamicPrintConfig full_cfg = DynamicPrintConfig::full_print_config();
+        full_cfg.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75 };
+        full_cfg.opt<ConfigOptionStrings>("filament_colour")->values  = { "#111111", "#222222", "#333333" };
+        full_cfg.opt<ConfigOptionBools>("filament_is_mixed")->values  = { 0, 0, 1 };
+        full_cfg.opt<ConfigOptionStrings>("filament_mixed_components")->values       = { "", "", "1,2" };
+        full_cfg.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values   = { "", "", "0.6,0.4" };
+        full_cfg.opt<ConfigOptionBools>("filament_mixed_gradient")->values            = { 0, 0, 1 };
+        full_cfg.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values    = { "", "", "0.9,0.1" };
+        full_cfg.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values    = { "", "", "0,0.1|1,0.9" };
+        full_cfg.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values   = { 0, 0, 1 };
+
+        PublishedMaterialEntry mix_entry;
+        mix_entry.slot = 2;
+        mix_entry.keys = {
+            "filament_is_mixed",          "filament_mixed_components",       "filament_mixed_sublayer_ratios",
+            "filament_mixed_gradient",    "filament_mixed_gradient_range",   "filament_mixed_gradient_curve",
+            "filament_mixed_gradient_per_part"
+        };
+
+        WHEN("filtering with a mixed entry for slot 2") {
+            DynamicPrintConfig filtered_cfg = filter_published_config(full_cfg, {}, { mix_entry });
+
+            THEN("the author's mixed slot keeps its definition") {
+                REQUIRE(filtered_cfg.option("filament_is_mixed") != nullptr);
+                REQUIRE(filtered_cfg.opt<ConfigOptionBools>("filament_is_mixed")->values == std::vector<unsigned char>{ 0, 0, 1 });
+                const auto& components = filtered_cfg.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+                REQUIRE(components.size() == 3);
+                CHECK(components[2] == "1,2");
+                CHECK(filtered_cfg.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] == "0.6,0.4");
+                CHECK(filtered_cfg.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values[2] == "0,0.1|1,0.9");
+                CHECK(filtered_cfg.opt<ConfigOptionBools>("filament_mixed_gradient")->values[2]);
+                CHECK(filtered_cfg.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values[2]);
+            }
+            THEN("the non-published slots are masked to their defaults") {
+                CHECK(filtered_cfg.opt<ConfigOptionStrings>("filament_mixed_components")->values[0] == "");
+                CHECK(filtered_cfg.opt<ConfigOptionStrings>("filament_mixed_components")->values[1] == "");
+                CHECK(filtered_cfg.opt<ConfigOptionBools>("filament_is_mixed")->values[0] == 0);
+                CHECK(filtered_cfg.opt<ConfigOptionBools>("filament_is_mixed")->values[1] == 0);
+            }
+            THEN("the identity keys stay present") {
+                REQUIRE(filtered_cfg.option("filament_colour") != nullptr);
+            }
+        }
+    }
+}
+
+// The published flag is gated on the exact string "1": any other serialized value means "not
+// published", so a receiver never treats a file as published on a loose truthiness check.
+TEST_CASE("is_published_3mf_flag accepts only the literal \"1\"", "[3mf]") {
+    CHECK(is_published_3mf_flag("1"));
+    CHECK_FALSE(is_published_3mf_flag("0"));
+    CHECK_FALSE(is_published_3mf_flag("false"));
+    CHECK_FALSE(is_published_3mf_flag("true"));
+    CHECK_FALSE(is_published_3mf_flag(""));
+    CHECK_FALSE(is_published_3mf_flag("YES"));
+}
+
+// bbs_3mf_is_published is the lightweight metadata probe used to decide whether a file was
+// produced by the publish feature (GUI "recently published" tracking). It must return true only
+// for a file whose metadata carries the flag set to "1", and false for legacy files and for a
+// file whose flag is present but not "1" (which loads as a normal, non-published 3MF).
+SCENARIO("bbs_3mf_is_published detects only genuinely published 3MFs", "[3mf]") {
+    auto store_model = [](const std::string &path, const std::string &flag_value, const std::string &keys_value) {
+        Model model;
+        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
+        REQUIRE(load_stl(src_file.c_str(), &model));
+        model.add_default_instances();
+        model.model_info = std::make_shared<ModelInfo>();
+        // An empty flag_value means "don't write the flag at all" (a legacy file).
+        if (!flag_value.empty())
+            model.model_info->metadata_items[ORCA_PUBLISHED_TAG] = flag_value;
+        model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] = keys_value;
+        ScopedTemporaryDir backup_dir("orca_is_pub");
+        model.set_backup_path(backup_dir.string());
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        StoreParams store_params;
+        store_params.path     = path.c_str();
+        store_params.model    = &model;
+        store_params.config   = &config;
+        store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+        REQUIRE(store_bbs_3mf(store_params));
+    };
+
+    GIVEN("a minimal published 3MF whose flag is \"1\"") {
+        ScopedTemporaryFile temp(".3mf");
+        store_model(temp.string(), "1", R"(["layer_height"])");
+        WHEN("probed by bbs_3mf_is_published") {
+            THEN("it is recognized as published") {
+                CHECK(bbs_3mf_is_published(temp.string()));
+            }
+        }
+    }
+    GIVEN("a legacy 3MF without any published flag") {
+        ScopedTemporaryFile temp(".3mf");
+        store_model(temp.string(), "", R"(["layer_height"])");
+        WHEN("probed by bbs_3mf_is_published") {
+            THEN("it is not recognized as published") {
+                CHECK_FALSE(bbs_3mf_is_published(temp.string()));
+            }
+        }
+    }
+    GIVEN("a 3MF carrying the flag set to \"0\"") {
+        ScopedTemporaryFile temp(".3mf");
+        store_model(temp.string(), "0", R"(["layer_height"])");
+        WHEN("probed and loaded") {
+            THEN("it is not recognized as published") {
+                CHECK_FALSE(bbs_3mf_is_published(temp.string()));
+            }
+            THEN("it loads as a normal, non-published 3MF") {
+                Model dst_model;
+                DynamicPrintConfig dst_config;
+                ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+                PlateDataPtrs        dst_plates;
+                std::vector<Preset*> project_presets;
+                bool   is_bbl_3mf = false, is_orca_3mf = false;
+                Semver file_version;
+                REQUIRE(load_bbs_3mf(temp.string().c_str(), &dst_config, &ctxt, &dst_model, &dst_plates,
+                                     &project_presets, &is_bbl_3mf, &is_orca_3mf, &file_version, nullptr,
+                                     LoadStrategy::LoadModel | LoadStrategy::LoadConfig));
+                REQUIRE(dst_model.model_info != nullptr);
+                // The key is present but not "1", so nothing treats the file as published; the
+                // stored keys still round-trip verbatim.
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_TAG] == "0");
+                REQUIRE(dst_model.model_info->metadata_items[ORCA_PUBLISHED_KEYS_TAG] == R"(["layer_height"])");
+                release_PlateData_list(dst_plates);
+            }
+        }
+    }
+}
+
diff --git a/tests/libslic3r/test_arrange.cpp b/tests/libslic3r/test_arrange.cpp
index a9fb51e352..3906cba8ba 100644
--- a/tests/libslic3r/test_arrange.cpp
+++ b/tests/libslic3r/test_arrange.cpp
@@ -4,6 +4,8 @@
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/ClipperUtils.hpp"
 #include "libslic3r/ExPolygon.hpp"
+#include "libslic3r/Print.hpp"
+#include "libslic3r/PrintConfig.hpp"
 
 using namespace Slic3r;
 using namespace Slic3r::arrangement;
@@ -24,11 +26,13 @@ ArrangePolygon make_square(coord_t side)
     return ap;
 }
 
-ArrangePolygons squares(int n, double side_mm)
+ArrangePolygons squares(int n, double side_mm, double height_mm = 0.)
 {
     ArrangePolygons items;
-    for (int i = 0; i < n; ++i)
+    for (int i = 0; i < n; ++i) {
         items.emplace_back(make_square(scaled(side_mm)));
+        items.back().height = height_mm;
+    }
     return items;
 }
 
@@ -82,6 +86,38 @@ void require_no_overlap(const ArrangePolygons &items)
     REQUIRE(disjoint(placed_shapes(items)));
 }
 
+// The sequential-print floor is chosen by comparing object height against the nozzle,
+// so the two are defined together and every expectation is derived from them.
+constexpr double NOZZLE_HEIGHT_MM = 2.5;
+constexpr double CLEARANCE_MM     = 30.;
+constexpr double NOZZLE_FLOOR_MM  = MAX_OUTER_NOZZLE_DIAMETER / 2.;
+
+ArrangeParams seq_print_params(coord_t min_dist)
+{
+    ArrangeParams p       = quiet_params(min_dist);
+    p.is_seq_print        = true;
+    p.clearance_radius    = float(CLEARANCE_MM);
+    p.nozzle_height       = float(NOZZLE_HEIGHT_MM);
+    p.object_skirt_offset = 0.f;
+    return p;
+}
+
+// update_selected_items_inflation reads the bed out of the config to cap inflation.
+DynamicPrintConfig bed_config()
+{
+    DynamicPrintConfig c;
+    c.set_key_value("printable_area", new ConfigOptionPoints{{0, 0}, {200, 0}, {200, 200}, {0, 200}});
+    return c;
+}
+
+ArrangePolygons squares_of_heights(const std::vector<double> &heights_mm)
+{
+    ArrangePolygons items;
+    for (double height_mm : heights_mm)
+        items.push_back(squares(1, 20., height_mm).front());
+    return items;
+}
+
 } // namespace
 
 // Prove the overlap check the other tests rely on actually detects overlap.
@@ -222,3 +258,61 @@ TEST_CASE("Arrange aligns the pile to a custom center", "[Arrange]")
         REQUIRE(ap.bed_idx == 0);
     require_no_overlap(items);
 }
+
+TEST_CASE("Sequential print floors the object distance by object height", "[Arrange]")
+{
+    // The only place sequential-print clearance is enforced. The arrange menu offers
+    // no floor of its own, so a stored 0 has to be raised here or not at all.
+    struct Case
+    {
+        std::string         description;
+        std::vector<double> heights;
+        double              skirt_offset_mm;
+        double              expected_floor_mm;
+    };
+
+    auto c = GENERATE(values<Case>({
+        {"objects taller than the nozzle need the full clearance",     {NOZZLE_HEIGHT_MM * 2, NOZZLE_HEIGHT_MM * 2}, 0., CLEARANCE_MM},
+        {"an object exactly at the nozzle height counts as tall",      {NOZZLE_HEIGHT_MM,     NOZZLE_HEIGHT_MM},     0., CLEARANCE_MM},
+        {"one tall object among short ones is enough",                 {NOZZLE_HEIGHT_MM / 2, NOZZLE_HEIGHT_MM * 2}, 0., CLEARANCE_MM},
+        {"objects the nozzle clears keep only the nozzle-width floor", {NOZZLE_HEIGHT_MM / 2, NOZZLE_HEIGHT_MM / 2}, 0., NOZZLE_FLOOR_MM},
+        {"a wide skirt raises the floor for short objects",            {NOZZLE_HEIGHT_MM / 2, NOZZLE_HEIGHT_MM / 2}, 3., 6.},
+    }));
+
+    DYNAMIC_SECTION(c.description)
+    {
+        ArrangePolygons    items = squares_of_heights(c.heights);
+        DynamicPrintConfig cfg   = bed_config();
+        ArrangeParams      p     = seq_print_params(0);
+        p.object_skirt_offset    = float(c.skirt_offset_mm);
+
+        update_selected_items_inflation(items, &cfg, p);
+
+        CHECK(p.min_obj_distance >= scaled(c.expected_floor_mm));
+        CHECK(p.min_obj_distance <= scaled(c.expected_floor_mm + 0.01));
+        // Half each, so a pair ends up a full min_obj_distance apart.
+        CHECK(items.front().inflation == p.min_obj_distance / 2);
+    }
+}
+
+TEST_CASE("Sequential print keeps an object distance already above the floor", "[Arrange]")
+{
+    const coord_t      stored = scaled(CLEARANCE_MM * 2);
+    ArrangePolygons    items  = squares_of_heights({NOZZLE_HEIGHT_MM * 2, NOZZLE_HEIGHT_MM * 2});
+    DynamicPrintConfig cfg    = bed_config();
+    ArrangeParams      p      = seq_print_params(stored);
+
+    update_selected_items_inflation(items, &cfg, p);
+    CHECK(p.min_obj_distance == stored);
+}
+
+TEST_CASE("Layered printing does not floor the object distance", "[Arrange]")
+{
+    ArrangePolygons    items = squares_of_heights({NOZZLE_HEIGHT_MM * 2, NOZZLE_HEIGHT_MM * 2});
+    DynamicPrintConfig cfg   = bed_config();
+    ArrangeParams      p     = seq_print_params(0);
+    p.is_seq_print           = false;
+
+    update_selected_items_inflation(items, &cfg, p);
+    CHECK(p.min_obj_distance == 0);
+}
diff --git a/tests/libslic3r/test_config.cpp b/tests/libslic3r/test_config.cpp
index bd147b5881..208bbc6cf0 100644
--- a/tests/libslic3r/test_config.cpp
+++ b/tests/libslic3r/test_config.cpp
@@ -15,6 +15,8 @@
 #include <boost/nowide/fstream.hpp>
 #include <nlohmann/json.hpp>
 
+#include <sstream>
+
 using namespace Slic3r;
 
 SCENARIO("Generic config validation performs as expected.", "[Config]") {
@@ -488,6 +490,59 @@ TEST_CASE("save_to_json round-trips plugin capability references as strings", "[
     CHECK(reloaded.option<ConfigOptionStrings>("slicing_pipeline_plugin")->values == refs);
 }
 
+TEST_CASE("save_to_json writes the same document to a stream as to a file", "[Config]") {
+    DynamicPrintConfig config;
+    config.set_key_value("layer_height", new ConfigOptionFloat(0.2));
+    config.set_key_value("wall_loops", new ConfigOptionInt(3));
+    config.set_key_value("filament_type", new ConfigOptionStrings({ "PLA", "PETG" }));
+    config.set_key_value("machine_start_gcode", new ConfigOptionString("G28\nG1 Z5"));
+
+    ScopedTemporaryFile tmp(".json");
+    config.save_to_json(tmp.string(), "test_preset", "User", "1.0.0.0");
+    std::string file_contents;
+    {
+        boost::nowide::ifstream ifs(tmp.string());
+        file_contents.assign(std::istreambuf_iterator<char>(ifs), std::istreambuf_iterator<char>());
+    }
+    // The file format: one tab per nesting level and a trailing newline.
+    REQUIRE_FALSE(file_contents.empty());
+    CHECK(file_contents.rfind("{\n\t\"", 0) == 0);
+    CHECK(file_contents.back() == '\n');
+
+    std::ostringstream strict, replaced;
+    config.save_to_json(strict, "test_preset", "User", "1.0.0.0");
+    config.save_to_json(replaced, "test_preset", "User", "1.0.0.0", true);
+    CHECK(strict.str() == file_contents);
+    CHECK(replaced.str() == file_contents);
+    CHECK(nlohmann::json::parse(strict.str())["machine_start_gcode"] == "G28\nG1 Z5");
+}
+
+TEST_CASE("save_to_json replaces invalid UTF-8 in a stream only when asked", "[Config]") {
+    DynamicPrintConfig config;
+    config.set_key_value("machine_start_gcode", new ConfigOptionString("G28 ; \xff"));
+
+    std::ostringstream strict, replaced;
+    CHECK_THROWS_AS(config.save_to_json(strict, "test_preset", "User", "1.0.0.0"), nlohmann::json::type_error);
+    REQUIRE_NOTHROW(config.save_to_json(replaced, "test_preset", "User", "1.0.0.0", true));
+    CHECK(nlohmann::json::parse(replaced.str())["machine_start_gcode"] == "G28 ; \xEF\xBF\xBD");
+}
+
+TEST_CASE("save_to_json leaves an existing file untouched when the config cannot be serialized", "[Config]") {
+    DynamicPrintConfig config;
+    config.set_key_value("machine_start_gcode", new ConfigOptionString("G28 ; \xff"));
+
+    ScopedTemporaryFile tmp(".json");
+    {
+        boost::nowide::ofstream ofs(tmp.string());
+        ofs << "previous";
+    }
+    CHECK_THROWS_AS(config.save_to_json(tmp.string(), "test_preset", "User", "1.0.0.0"), nlohmann::json::type_error);
+
+    boost::nowide::ifstream ifs(tmp.string());
+    const std::string contents((std::istreambuf_iterator<char>(ifs)), std::istreambuf_iterator<char>());
+    CHECK(contents == "previous");
+}
+
 TEST_CASE("plugin capability references survive string-map serialization", "[Config][plugins]") {
     const std::vector<std::string> refs = {
         "master_plugin;;header-stamp",
@@ -1091,3 +1146,128 @@ TEST_CASE("get_filament_type treats empty vector options as absent", "[Config][F
         REQUIRE(displayed == "Sup.PLA");
     }
 }
+
+namespace {
+
+// min_object_distance reads exactly these three options.
+DynamicPrintConfig spacing_config(PrinterTechnology tech, PrintSequence seq, double clearance_radius)
+{
+    DynamicPrintConfig c;
+    c.set_key_value("printer_technology", new ConfigOptionEnum<PrinterTechnology>(tech));
+    c.set_key_value("print_sequence", new ConfigOptionEnum<PrintSequence>(seq));
+    c.set_key_value("extruder_clearance_radius", new ConfigOptionFloat(clearance_radius));
+    return c;
+}
+
+} // namespace
+
+TEST_CASE("min_object_distance floors object spacing per print sequence", "[Config]")
+{
+    struct Case
+    {
+        std::string       description;
+        PrinterTechnology tech;
+        PrintSequence     sequence;
+        double            clearance_radius;
+        double            expected;
+    };
+
+    auto c = GENERATE(values<Case>({
+        {"sequential FFF takes a clearance radius above the floor", ptFFF, PrintSequence::ByObject, 12., 12.},
+        {"sequential FFF holds the floor at the radius",            ptFFF, PrintSequence::ByObject,  6.,  6.},
+        {"sequential FFF holds the floor below the radius",         ptFFF, PrintSequence::ByObject,  4.,  6.},
+        {"layered FFF ignores the clearance radius",                ptFFF, PrintSequence::ByLayer,  12.,  6.},
+        {"SLA is a flat 6mm",                                       ptSLA, PrintSequence::ByObject, 12.,  6.},
+        {"SLA ignores the print sequence too",                      ptSLA, PrintSequence::ByLayer,  12.,  6.},
+    }));
+
+    DYNAMIC_SECTION(c.description)
+    {
+        CHECK_THAT(min_object_distance(spacing_config(c.tech, c.sequence, c.clearance_radius)),
+                   Catch::Matchers::WithinAbs(c.expected, 1e-9));
+    }
+}
+
+TEST_CASE("min_object_distance yields no floor when an FFF config lacks the options", "[Config]")
+{
+    // Missing options yield 0 rather than an error, so a caller gets no floor at all.
+    SECTION("no clearance radius") {
+        DynamicPrintConfig c;
+        c.set_key_value("printer_technology", new ConfigOptionEnum<PrinterTechnology>(ptFFF));
+        c.set_key_value("print_sequence", new ConfigOptionEnum<PrintSequence>(PrintSequence::ByObject));
+        CHECK_THAT(min_object_distance(c), Catch::Matchers::WithinAbs(0., 1e-9));
+    }
+
+    SECTION("no print sequence") {
+        DynamicPrintConfig c;
+        c.set_key_value("printer_technology", new ConfigOptionEnum<PrinterTechnology>(ptFFF));
+        c.set_key_value("extruder_clearance_radius", new ConfigOptionFloat(12.));
+        CHECK_THAT(min_object_distance(c), Catch::Matchers::WithinAbs(0., 1e-9));
+    }
+
+    SECTION("nothing at all") {
+        CHECK_THAT(min_object_distance(DynamicPrintConfig{}), Catch::Matchers::WithinAbs(0., 1e-9));
+    }
+
+    SECTION("an unset printer technology is treated as FFF") {
+        DynamicPrintConfig c;
+        c.set_key_value("print_sequence", new ConfigOptionEnum<PrintSequence>(PrintSequence::ByObject));
+        c.set_key_value("extruder_clearance_radius", new ConfigOptionFloat(12.));
+        CHECK_THAT(min_object_distance(c), Catch::Matchers::WithinAbs(12., 1e-9));
+    }
+}
+
+TEST_CASE("Static print configs compare, order and hash by their option values", "[Config]")
+{
+    // PrintObjectConfig comes from PRINT_CONFIG_CLASS_DEFINE; PrintConfig combines MachineEnvelopeConfig
+    // and GCodeConfig through PRINT_CONFIG_CLASS_DERIVED_DEFINE. Both generate hash(), operator==,
+    // operator< and the option registration from the same option list. The hash inequalities use fixed
+    // inputs, so they are deterministic; they check that hash() covers the changed option.
+    SECTION("default-constructed configs are equal and find their options by key")
+    {
+        PrintObjectConfig a, b;
+        REQUIRE(a == b);
+        REQUIRE(a.hash() == b.hash());
+        REQUIRE_FALSE(a < b);
+        REQUIRE_FALSE(b < a);
+        REQUIRE(a.optptr("layer_height") == &a.layer_height);
+        REQUIRE(a.optptr("brim_object_gap") == &a.brim_object_gap);
+    }
+
+    SECTION("one differing option makes the configs unequal and orders them")
+    {
+        PrintObjectConfig a, b;
+        b.layer_height.value = a.layer_height.value + 0.05;
+        REQUIRE(a != b);
+        REQUIRE(a.hash() != b.hash());
+        REQUIRE(a < b);
+        REQUIRE_FALSE(b < a);
+    }
+
+    SECTION("ordering is decided by the first option in declaration order that differs")
+    {
+        PrintObjectConfig a, b;
+        a.brim_object_gap.value = b.brim_object_gap.value + 1.0;  // declared first
+        a.layer_height.value    = b.layer_height.value - 0.05;    // declared later, points the other way
+        REQUIRE(b < a);
+        REQUIRE_FALSE(a < b);
+    }
+
+    SECTION("a derived config sees differences in its parents and in its own options")
+    {
+        PrintConfig a, b;
+        REQUIRE(a == b);
+        REQUIRE(a.hash() == b.hash());
+
+        b.gcode_flavor.value = b.gcode_flavor.value == gcfMarlinLegacy ? gcfKlipper : gcfMarlinLegacy;  // GCodeConfig parent
+        REQUIRE(a != b);
+        REQUIRE(a.hash() != b.hash());
+
+        PrintConfig c, d;
+        d.skirt_distance.value = c.skirt_distance.value + 1.0;  // PrintConfig's own list
+        REQUIRE(c != d);
+        REQUIRE(c.hash() != d.hash());
+        REQUIRE(c.optptr("skirt_distance") == &c.skirt_distance);
+        REQUIRE(c.optptr("gcode_flavor") == &c.gcode_flavor);
+    }
+}
diff --git a/tests/libslic3r/test_config_variant_expansion.cpp b/tests/libslic3r/test_config_variant_expansion.cpp
index 2469789d5b..d8e09539bb 100644
--- a/tests/libslic3r/test_config_variant_expansion.cpp
+++ b/tests/libslic3r/test_config_variant_expansion.cpp
@@ -484,6 +484,34 @@ TEST_CASE("update_values_to_printer_extruders_for_multiple_filaments resolves pe
         REQUIRE(config.option<ConfigOptionFloats>("filament_max_volumetric_speed")->values == std::vector<double>({12., 21.}));
         REQUIRE(config.option<ConfigOptionInts>("filament_self_index")->values == std::vector<int>({1, 2}));
     }
+
+    SECTION("a variant option shorter than the filament slots keeps its first value instead of zero") {
+        DynamicPrintConfig config;
+        config.option<ConfigOptionEnumsGeneric>("extruder_type", true)->values = {etDirectDrive, etDirectDrive};
+        config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type", true)->values = {nvtStandard, nvtHighFlow};
+        config.option<ConfigOptionStrings>("extruder_variant_list", true)->values = {"Direct Drive Standard,Direct Drive High Flow",
+                                                                                     "Direct Drive Standard,Direct Drive High Flow"};
+        make_filament_arrays(config);
+        config.option<ConfigOptionInts>("filament_map", true)->values = {1, 2};
+        // no loaded preset carries the key, so only its single registered default is present
+        config.option<ConfigOptionFloatsNullable>("filament_cooling_before_tower", true)->values = {10.};
+        // only the first filament's two variant columns were loaded
+        config.option<ConfigOptionFloatsNullable>("filament_ramming_volumetric_speed", true)->values = {-1., -2.};
+
+        std::vector<std::vector<NozzleVolumeType>> nozzle_volume_types;
+        int extruder_count = 2;
+        int count = config.get_extruder_nozzle_volume_count(extruder_count, nozzle_volume_types);
+
+        config.update_values_to_printer_extruders_for_multiple_filaments(config, extruder_count, count, filament_keys,
+            "filament_self_index", "filament_extruder_variant");
+
+        // filament 2 resolves to column 3 (its extruder's High Flow column), past the end of both vectors
+        REQUIRE_THAT(config.option<ConfigOptionFloatsNullable>("filament_cooling_before_tower")->values,
+                     Catch::Matchers::Approx(std::vector<double>({10., 10.})));
+        REQUIRE_THAT(config.option<ConfigOptionFloatsNullable>("filament_ramming_volumetric_speed")->values,
+                     Catch::Matchers::Approx(std::vector<double>({-1., -1.})));
+        REQUIRE(config.option<ConfigOptionFloats>("filament_max_volumetric_speed")->values == std::vector<double>({12., 21.}));
+    }
 }
 
 // update_values_from_multi_to_multi_2 walks the DESTINATION PRINTER's variant list while writing
diff --git a/tests/libslic3r/test_lay_on_face.cpp b/tests/libslic3r/test_lay_on_face.cpp
new file mode 100644
index 0000000000..60226a9aab
--- /dev/null
+++ b/tests/libslic3r/test_lay_on_face.cpp
@@ -0,0 +1,205 @@
+#include <catch2/catch_all.hpp>
+
+#include "libslic3r/LayOnFace.hpp"
+#include "libslic3r/Model.hpp"
+
+using namespace Slic3r;
+using Catch::Matchers::WithinAbs;
+
+namespace {
+
+// Adds a box part spanning `origin` to `origin + size`, in object coordinates.
+void add_box(ModelObject &object, const Vec3d &size, const Vec3d &origin = Vec3d::Zero())
+{
+    TriangleMesh mesh = make_cube(size.x(), size.y(), size.z());
+    mesh.translate(origin.cast<float>());
+    object.add_volume(std::move(mesh), ModelVolumeType::MODEL_PART, false);
+}
+
+ModelObject &add_box_object(Model &model, const Vec3d &size)
+{
+    ModelObject *object = model.add_object();
+    add_box(*object, size);
+    object->add_instance();
+    return *object;
+}
+
+// A 30 x 30 x 2 plate with three 1 mm thick, 20 mm tall ribs along Y. The rib sides facing -X add up
+// to more area than the plate's bottom, but only the bottom is a face of the convex hull.
+ModelObject &add_ribbed_plate(Model &model)
+{
+    ModelObject *object = model.add_object();
+    add_box(*object, { 30, 30, 2 });
+    for (double x : { 5., 14.5, 24. })
+        add_box(*object, { 1, 30, 20 }, { x, 0, 2 });
+    object->add_instance();
+    return *object;
+}
+
+std::vector<LayOnFacePlane> instance_planes(const ModelObject &object)
+{
+    return lay_on_face_planes(object, object.instances.front()->get_matrix_no_offset());
+}
+
+void lay_on_largest_face(ModelObject &object)
+{
+    const std::vector<LayOnFacePlane> planes = instance_planes(object);
+    const int                         idx    = find_largest_plane(planes);
+    REQUIRE(idx >= 0);
+    lay_on_face(object, 0, planes[idx].normal);
+}
+
+void check_size(const ModelObject &object, const Vec3d &expected)
+{
+    const Vec3d size = object.instance_bounding_box(0).size();
+    CHECK_THAT(size.x(), WithinAbs(expected.x(), 1e-3));
+    CHECK_THAT(size.y(), WithinAbs(expected.y(), 1e-3));
+    CHECK_THAT(size.z(), WithinAbs(expected.z(), 1e-3));
+}
+
+void check_on_bed(const ModelObject &object) { CHECK_THAT(object.instance_bounding_box(0).min.z(), WithinAbs(0., 1e-3)); }
+
+} // namespace
+
+TEST_CASE("A tilted box is laid on its largest face and dropped onto the bed", "[LayOnFace]")
+{
+    Model        model;
+    ModelObject &box = add_box_object(model, { 40, 20, 10 }); // the 40 x 20 faces are the largest
+    box.instances.front()->set_rotation({ 0.3, 0.5, 0.2 });
+    box.instances.front()->set_offset({ 0, 0, 50 });
+    REQUIRE(box.instance_bounding_box(0).size().z() > 11.);
+
+    const std::vector<LayOnFacePlane> planes = instance_planes(box);
+    REQUIRE(planes.size() == 6);
+    CHECK_THAT(planes.front().area, WithinAbs(40. * 20., 1e-2));
+
+    lay_on_largest_face(box);
+    CHECK_THAT(box.instance_bounding_box(0).size().z(), WithinAbs(10., 1e-3));
+    check_on_bed(box);
+}
+
+TEST_CASE("A box lying on one of its equally large faces is not flipped", "[LayOnFace]")
+{
+    // A half turn about X puts the other large face down, so the two cases expect different faces
+    // and neither can pass on the order in which the hull lists them.
+    const double rotation_x = GENERATE(0., PI);
+    Model        model;
+    ModelObject &box = add_box_object(model, { 40, 20, 10 }); // the bottom and top are both 40 x 20
+    box.instances.front()->set_rotation({ rotation_x, 0, 0 });
+    const Transform3d before = box.instances.front()->get_matrix_no_offset();
+
+    const std::vector<LayOnFacePlane> planes = instance_planes(box);
+    const int                         idx    = find_largest_plane(planes);
+    REQUIRE(idx >= 0);
+    // The face down on the plate is the object's -Z face, or its +Z face after the half turn.
+    CHECK_THAT(planes[idx].normal.z(), WithinAbs(rotation_x == 0. ? -1. : 1., 1e-6));
+
+    lay_on_face(box, 0, planes[idx].normal);
+    CHECK(box.instances.front()->get_matrix_no_offset().isApprox(before, 1e-9));
+}
+
+TEST_CASE("Faces are chosen from the orientation left by an earlier part rotation", "[LayOnFace]")
+{
+    Model        model;
+    ModelObject &box = add_box_object(model, { 40, 20, 10 });
+    box.rotate(PI / 2., X); // what --rotate-x 90 does: rotates the parts, not the instance
+    check_size(box, { 40, 10, 20 });
+
+    SECTION("the largest face") {
+        lay_on_largest_face(box);
+        check_size(box, { 40, 20, 10 });
+        check_on_bed(box);
+    }
+
+    SECTION("the face pointing along +X") {
+        const std::vector<LayOnFacePlane> planes = instance_planes(box);
+        const int                         idx    = find_plane_by_normal(planes, { 1, 0, 0 });
+        REQUIRE(idx >= 0);
+        CHECK_THAT(planes[idx].normal.x(), WithinAbs(1., 1e-6));
+        lay_on_face(box, 0, planes[idx].normal);
+        check_size(box, { 20, 10, 40 });
+        check_on_bed(box);
+    }
+}
+
+TEST_CASE("Objects are laid on their own faces independently", "[LayOnFace]")
+{
+    Model model;
+    // Standing on end through its instance rotation.
+    ModelObject &standing = add_box_object(model, { 40, 20, 10 });
+    standing.instances.front()->set_rotation({ 0, PI / 2., 0 });
+    // Standing on edge through a part rotation, lifted above the bed.
+    ModelObject &on_edge = add_box_object(model, { 30, 20, 5 });
+    on_edge.rotate(PI / 2., X);
+    on_edge.instances.front()->set_offset({ 100, 0, 30 });
+    check_size(standing, { 10, 20, 40 });
+    check_size(on_edge, { 30, 5, 20 });
+
+    for (ModelObject *object : model.objects)
+        lay_on_largest_face(*object);
+
+    check_size(standing, { 40, 20, 10 });
+    check_on_bed(standing);
+    check_size(on_edge, { 30, 20, 5 });
+    check_on_bed(on_edge);
+}
+
+TEST_CASE("A part rests on its largest hull face even when parallel inner faces add up to more area", "[LayOnFace]")
+{
+    Model        model;
+    ModelObject &plate = add_ribbed_plate(model);
+
+    double area_facing_minus_x = 0.;
+    for (const ModelVolume *volume : plate.volumes) {
+        const indexed_triangle_set &its = volume->mesh().its;
+        for (const Vec3i32 &face : its.indices) {
+            const Vec3d cross = (its.vertices[face[1]] - its.vertices[face[0]]).cast<double>().cross(
+                (its.vertices[face[2]] - its.vertices[face[0]]).cast<double>());
+            if (cross.normalized().x() < -0.999)
+                area_facing_minus_x += 0.5 * cross.norm();
+        }
+    }
+    // Summing triangle area per normal would pick a rib side over the 900 mm² bottom.
+    REQUIRE(area_facing_minus_x > 30. * 30.);
+
+    plate.instances.front()->set_rotation({ 0, PI / 2., 0 }); // stand the plate on its side
+    check_size(plate, { 22, 30, 30 });
+
+    const std::vector<LayOnFacePlane> planes = instance_planes(plate);
+    const int                         idx    = find_largest_plane(planes);
+    REQUIRE(idx >= 0);
+    CHECK_THAT(planes[idx].area, WithinAbs(30. * 30., 1e-2));
+    CHECK_THAT(planes[idx].normal.z(), WithinAbs(-1., 1e-6));
+
+    lay_on_face(plate, 0, planes[idx].normal);
+    check_size(plate, { 30, 30, 22 });
+    check_on_bed(plate);
+}
+
+TEST_CASE("Faces are selected in object coordinates whatever the instance rotation", "[LayOnFace]")
+{
+    Model        model;
+    ModelObject &plate = add_ribbed_plate(model);
+    plate.instances.front()->set_rotation({ 0, 0, PI / 2. });
+    const Transform3d                 instance_matrix = plate.instances.front()->get_matrix_no_offset();
+    const std::vector<LayOnFacePlane> planes          = lay_on_face_planes(plate, instance_matrix);
+    REQUIRE_FALSE(planes.empty());
+
+    // Every face center, as --inspect-mesh reports it, selects its own face.
+    for (size_t i = 0; i < planes.size(); ++i)
+        CHECK(find_plane_at_point(planes, instance_matrix, planes[i].center, 0.01) == int(i));
+
+    const int bottom = find_plane_at_point(planes, instance_matrix, { 15, 15, 0 }, 0.01);
+    REQUIRE(bottom >= 0);
+    CHECK_THAT(planes[bottom].normal.z(), WithinAbs(-1., 1e-6));
+    CHECK(find_plane_by_normal(planes, { 0, 0, -1 }) == bottom);
+    // Above the bottom plane, and on a rib side that lies inside the hull.
+    CHECK(find_plane_at_point(planes, instance_matrix, { 15, 15, 0.5 }, 0.01) == -1);
+    CHECK(find_plane_at_point(planes, instance_matrix, { 14.5, 15, 12 }, 0.01) == -1);
+}
+
+TEST_CASE("A part too small to rest on offers no faces", "[LayOnFace]")
+{
+    Model model;
+    CHECK(instance_planes(add_box_object(model, { 2, 2, 2 })).empty()); // every face is 4 mm², under the 5 mm² minimum
+}
diff --git a/tests/libslic3r/test_marchingsquares.cpp b/tests/libslic3r/test_marchingsquares.cpp
index 6844ecb6ac..9a11f49faa 100644
--- a/tests/libslic3r/test_marchingsquares.cpp
+++ b/tests/libslic3r/test_marchingsquares.cpp
@@ -1,4 +1,6 @@
+#ifndef NOMINMAX
 #define NOMINMAX
+#endif
 
 #include <catch2/catch_all.hpp>
 #include "test_utils.hpp"
diff --git a/tests/libslic3r/test_minimum_spanning_tree.cpp b/tests/libslic3r/test_minimum_spanning_tree.cpp
new file mode 100644
index 0000000000..5f9998171c
--- /dev/null
+++ b/tests/libslic3r/test_minimum_spanning_tree.cpp
@@ -0,0 +1,66 @@
+#include <catch2/catch_all.hpp>
+
+#include <algorithm>
+
+#include "libslic3r/MinimumSpanningTree.hpp"
+#include "libslic3r/Point.hpp"
+
+using namespace Slic3r;
+
+// A 5x5 lattice: at every step of Prim's algorithm several candidates sit at the same
+// distance from the tree, so the tie-break decides the tree's shape.
+static std::vector<Point> lattice()
+{
+    std::vector<Point> vertices;
+    for (int y = 0; y < 5; ++y)
+        for (int x = 0; x < 5; ++x)
+            vertices.emplace_back(Point::new_scale(x, y));
+    return vertices;
+}
+
+static std::vector<Point> sorted_neighbours(const MinimumSpanningTree &mst, const Point &vertex)
+{
+    std::vector<Point> neighbours = mst.adjacent_nodes(vertex);
+    std::sort(neighbours.begin(), neighbours.end());
+    return neighbours;
+}
+
+TEST_CASE("Minimum spanning tree connects every vertex", "[MinimumSpanningTree]")
+{
+    const std::vector<Point> vertices = lattice();
+    const MinimumSpanningTree mst(vertices);
+
+    REQUIRE(mst.vertices().size() == vertices.size());
+    size_t adjacency_entries = 0;
+    for (const Point &vertex : vertices) {
+        const std::vector<Point> neighbours = mst.adjacent_nodes(vertex);
+        REQUIRE(! neighbours.empty());
+        adjacency_entries += neighbours.size();
+    }
+    // A tree on n vertices has n - 1 edges, each listed from both ends.
+    REQUIRE(adjacency_entries == 2 * (vertices.size() - 1));
+}
+
+TEST_CASE("Minimum spanning tree does not depend on the order of the non-root vertices", "[MinimumSpanningTree][Regression]")
+{
+    const std::vector<Point> vertices = lattice();
+    const MinimumSpanningTree reference(vertices);
+
+    // The root stays first: Prim's tree legitimately depends on where it starts.
+    // Every other order of the remaining vertices must give the same tree.
+    std::vector<std::vector<Point>> orders;
+    orders.emplace_back(vertices);
+    std::reverse(orders.back().begin() + 1, orders.back().end());
+    for (size_t shift = 1; shift + 1 < vertices.size(); ++shift) {
+        orders.emplace_back(vertices);
+        std::rotate(orders.back().begin() + 1, orders.back().begin() + 1 + shift, orders.back().end());
+    }
+
+    for (const std::vector<Point> &order : orders) {
+        const MinimumSpanningTree mst(order);
+        for (const Point &vertex : vertices) {
+            INFO("vertex " << vertex.x() << "," << vertex.y());
+            REQUIRE(sorted_neighbours(mst, vertex) == sorted_neighbours(reference, vertex));
+        }
+    }
+}
diff --git a/tests/libslic3r/test_preset_bundle_loading.cpp b/tests/libslic3r/test_preset_bundle_loading.cpp
index 26cbf387ec..6ec6ba9b1e 100644
--- a/tests/libslic3r/test_preset_bundle_loading.cpp
+++ b/tests/libslic3r/test_preset_bundle_loading.cpp
@@ -6,15 +6,37 @@
 
 #include "libslic3r/PresetBundle.hpp"
 #include "libslic3r/AppConfig.hpp"
+#include "libslic3r/Model.hpp"
+#include "libslic3r/TriangleMesh.hpp"
+#include "libslic3r/Utils.hpp"
+#include "libslic3r/miniz_extension.hpp"
 
 #include "test_utils.hpp"
 
+#include <algorithm>
+#include <iostream>
+#include <initializer_list>
+
 using namespace Slic3r;
 
 namespace {
 
 namespace fs = boost::filesystem;
 
+// Whether a key is listed in a vector of keys (published_keys / skipped_keys).
+bool contains_key(const std::vector<std::string> &keys, const std::string &key)
+{
+    return std::find(keys.begin(), keys.end(), key) != keys.end();
+}
+
+void check_double_vector(const std::vector<double> &actual, std::initializer_list<double> expected)
+{
+    REQUIRE(actual.size() == expected.size());
+    size_t index = 0;
+    for (double value : expected)
+        REQUIRE_THAT(actual[index++], Catch::Matchers::WithinAbs(value, 1e-6));
+}
+
 void write_print_preset(const DynamicPrintConfig &default_config, const fs::path &file, const std::string &name, const std::string &inherits = {})
 {
     DynamicPrintConfig config(default_config);
@@ -53,6 +75,22 @@ void set_renamed_from(PresetCollection &coll, const std::string &preset_name, st
             it->renamed_from = std::move(old_names);
 }
 
+// A single-slot PLA file config for the published-material load tests (mirrors what the GUI
+// builds from a 3mf's project settings before load_config_model).
+DynamicPrintConfig published_pla_file_config()
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+    config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99" };
+    config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9 };
+    return config;
+}
+
 // A standalone print preset collection that exposes the protected rename-map builder, so a
 // renamed_from scenario can be set up without the full system-profile load pipeline.
 // (PresetCollection is non-copyable - it holds a mutex - so it is constructed directly with
@@ -515,6 +553,107 @@ TEST_CASE("Profile validator flags dangling and renamed preset references", "[Pr
     }
 }
 
+TEST_CASE("Every printer variant has a compatible default material", "[Preset][Validate][DefaultMaterials]")
+{
+    PresetBundle bundle;
+    auto &vendor = bundle.vendors["Acme"];
+    vendor.id = vendor.name = "Acme";
+    vendor.models.emplace_back();
+    auto &model = vendor.models.back();
+    model.id = model.name = "Acme Printer";
+    model.default_materials = {"Acme PLA @0.4", "Acme PLA @0.6"};
+
+    for (const std::string variant : {"0.4", "0.6"}) {
+        model.variants.emplace_back(variant);
+        const std::string printer_name = "Acme Printer " + variant;
+        Preset &printer = add_inmemory_preset(bundle.printers, printer_name);
+        printer.is_system = true;
+        printer.is_visible = false; // Validation covers uninstalled variants too.
+        printer.vendor = &vendor;
+        printer.config.option<ConfigOptionString>("printer_model")->value = model.id;
+        printer.config.option<ConfigOptionString>("printer_variant")->value = variant;
+        printer.config.option<ConfigOptionFloats>("nozzle_diameter")->values = {std::stod(variant)};
+
+        Preset &filament = add_inmemory_preset(bundle.filaments, "Acme PLA @" + variant);
+        filament.is_system = true;
+        filament.vendor = &vendor;
+        filament.alias = "Acme PLA";
+        filament.config.option<ConfigOptionStrings>("compatible_printers")->values = {printer_name};
+    }
+
+    // A second system filament, compatible with a user printer this model does not have, so a
+    // section can list a known-but-incompatible name without tripping the existence check.
+    Preset &other_printer = add_inmemory_preset(bundle.printers, "Acme Printer 0.2");
+    other_printer.vendor = &vendor;
+    Preset &other_filament = add_inmemory_preset(bundle.filaments, "Acme PLA @0.2");
+    other_filament.is_system = true;
+    other_filament.vendor = &vendor;
+    other_filament.alias = "Acme PLA";
+    other_filament.config.option<ConfigOptionStrings>("compatible_printers")->values = {"Acme Printer 0.2"};
+
+    CHECK_FALSE(bundle.has_errors());
+    bool expected_errors = true;
+
+    SECTION("A model default for one nozzle does not cover another nozzle") {
+        model.default_materials = {"Acme PLA @0.4"};
+    }
+    SECTION("An empty default list leaves every variant uncovered") {
+        model.default_materials.clear();
+    }
+    SECTION("An unknown filament cannot be a default") {
+        model.default_materials = {"Missing PLA"};
+    }
+    SECTION("An unknown name is an error even when a compatible default covers the variant") {
+        model.default_materials.insert(model.default_materials.begin(), "Missing PLA");
+    }
+    SECTION("An unknown default_filament_profile name is an error") {
+        bundle.printers.find_preset("Acme Printer 0.6", false, true)
+            ->config.option<ConfigOptionStrings>("default_filament_profile", true)->values = {"Missing PLA"};
+    }
+    SECTION("A known default_filament_profile name is not an error") {
+        bundle.printers.find_preset("Acme Printer 0.6", false, true)
+            ->config.option<ConfigOptionStrings>("default_filament_profile", true)->values = {"Acme PLA @0.6"};
+        expected_errors = false;
+    }
+    SECTION("A short alias does not resolve as an installed default") {
+        model.default_materials = {"Acme PLA"};
+    }
+    SECTION("A user filament cannot satisfy a shipped default") {
+        bundle.filaments.find_preset("Acme PLA @0.6", false, true)->is_system = false;
+    }
+    SECTION("One compatible default per variant is sufficient") {
+        model.default_materials.insert(model.default_materials.begin(), "Acme PLA @0.2");
+        expected_errors = false;
+    }
+    SECTION("Compatibility conditions apply to each nozzle") {
+        model.default_materials = {"Acme PLA @0.4"};
+        Preset *filament = bundle.filaments.find_preset("Acme PLA @0.4", false, true);
+        auto &library = bundle.vendors[PresetBundle::ORCA_FILAMENT_LIBRARY];
+        library.id = library.name = PresetBundle::ORCA_FILAMENT_LIBRARY;
+        filament->vendor = &library;
+        filament->config.option<ConfigOptionStrings>("compatible_printers")->values.clear();
+        filament->config.option<ConfigOptionString>("compatible_printers_condition")->value = "nozzle_diameter[0] == 0.4";
+    }
+    SECTION("Library defaults respect printer exclusions") {
+        model.default_materials = {"Acme PLA @0.4"};
+        Preset *filament = bundle.filaments.find_preset("Acme PLA @0.4", false, true);
+        auto &library = bundle.vendors[PresetBundle::ORCA_FILAMENT_LIBRARY];
+        library.id = library.name = PresetBundle::ORCA_FILAMENT_LIBRARY;
+        filament->vendor = &library;
+        filament->config.option<ConfigOptionStrings>("compatible_printers")->values.clear();
+        CHECK_FALSE(bundle.check_printer_default_materials());
+        filament->m_excluded_from.insert("Acme Printer 0.6");
+    }
+    SECTION("User printers do not need model defaults") {
+        model.default_materials = {"Acme PLA @0.4"};
+        bundle.printers.find_preset("Acme Printer 0.6", false, true)->is_system = false;
+        expected_errors = false;
+    }
+
+    CHECK(bundle.check_printer_default_materials() == expected_errors);
+    CHECK(bundle.has_errors() == expected_errors);
+}
+
 // Under a shared override key, the last preset merged into the full config overwrote the others', so an
 // edited slicing-pipeline override never reached Print::apply's diff and re-configuring a plugin never
 // re-sliced. Per-type keys make that collision impossible; guard the scoping here.
@@ -949,6 +1088,193 @@ TEST_CASE("Resolution terminates when no vendor manifest exists", "[Preset][Bund
     CHECK(error == "Preset was not found in the loaded bundle");
 }
 
+TEST_CASE("Manifest-backed resolution reuses the vendor tree it already loaded", "[Preset][Bundle][Regression]")
+{
+    ScopedTemporaryDir dir;
+    const fs::path      process_dir = dir.path() / "Acme" / "process";
+    fs::create_directories(process_dir);
+    std::ofstream((dir.path() / "Acme.json").string())
+        << R"({"version":"1.0.0","name":"Acme","process_list":[)"
+        << R"({"name":"fdm_process_common","sub_path":"process/base.json"},)"
+        << R"({"name":"Acme First","sub_path":"process/first.json"},)"
+        << R"({"name":"Acme Second","sub_path":"process/second.json"}]})";
+    auto write_base = [&](double travel_speed) {
+        std::ofstream((process_dir / "base.json").string())
+            << R"({"type":"process","name":"fdm_process_common","from":"system",)"
+            << R"("instantiation":"false","travel_speed":[")" << travel_speed << R"("]})";
+    };
+    auto write_child = [&](const std::string &file, const std::string &name) {
+        std::ofstream((process_dir / file).string())
+            << R"({"type":"process","name":")" << name << R"(","from":"system",)"
+            << R"("instantiation":"true","inherits":"fdm_process_common"})";
+    };
+    write_base(111.0);
+    write_child("first.json", "Acme First");
+    write_child("second.json", "Acme Second");
+
+    auto travel_speed = [&](PresetBundle &bundle, const std::string &file) {
+        DynamicPrintConfig raw;
+        raw.option<ConfigOptionString>(BBL_JSON_KEY_INHERITS, true)->value = "fdm_process_common";
+        std::string error;
+        REQUIRE(bundle.resolve_preset_config(raw, Preset::TYPE_PRINT, (process_dir / file).string(),
+                                             ForwardCompatibilitySubstitutionRule::EnableSilent, error));
+        return raw.option<ConfigOptionFloats>("travel_speed")->values.front();
+    };
+
+    PresetBundle bundle;
+    CHECK_THAT(travel_speed(bundle, "first.json"), Catch::Matchers::WithinAbs(111.0, 1e-6));
+
+    // Only a reload would see this change.
+    write_base(222.0);
+    CHECK_THAT(travel_speed(bundle, "second.json"), Catch::Matchers::WithinAbs(111.0, 1e-6));
+
+    PresetBundle fresh;
+    CHECK_THAT(travel_speed(fresh, "second.json"), Catch::Matchers::WithinAbs(222.0, 1e-6));
+}
+
+TEST_CASE("Manifest-backed resolution does not keep a vendor tree that failed to load", "[Preset][Bundle][Regression]")
+{
+    ScopedTemporaryDir dir;
+    const fs::path      child_file = dir.path() / "Acme" / "process" / "child.json";
+    auto write_manifest = [&](const std::string &leading_entry) {
+        std::ofstream((dir.path() / "Acme.json").string())
+            << R"({"version":"1.0.0","name":"Acme","process_list":[)" << leading_entry
+            << R"({"name":"Acme Process","sub_path":"process/child.json"}]})";
+    };
+    write_manifest("123,");
+    fs::create_directories(child_file.parent_path());
+    std::ofstream(child_file.string())
+        << R"({"type":"process","name":"Acme Process","from":"system",)"
+        << R"("instantiation":"true","layer_height":"0.2"})";
+
+    PresetBundle bundle;
+    auto resolve = [&](std::string &error) {
+        DynamicPrintConfig raw;
+        raw.option<ConfigOptionString>(BBL_JSON_KEY_INHERITS, true)->value = "fdm_process_common";
+        return bundle.resolve_preset_config(raw, Preset::TYPE_PRINT, child_file.string(),
+                                            ForwardCompatibilitySubstitutionRule::EnableSilent, error);
+    };
+
+    std::string error;
+    CHECK_FALSE(resolve(error));
+    CHECK_FALSE(error.empty());
+
+    write_manifest("");
+    error.clear();
+    CHECK(resolve(error));
+    CHECK(error.empty());
+}
+
+TEST_CASE("Manifest-backed resolution reuses the library base for type-probed files", "[Preset][Bundle][Regression]")
+{
+    ScopedTemporaryDir dir;
+    const fs::path      library_pet  = dir.path() / PresetBundle::ORCA_FILAMENT_LIBRARY / "filament" / "pet.json";
+    const fs::path      filament_dir = dir.path() / "Acme" / "filament";
+
+    std::ofstream((dir.path() / (std::string(PresetBundle::ORCA_FILAMENT_LIBRARY) + ".json")).string())
+        << R"({"version":"1.0.0","name":"OrcaFilamentLibrary","filament_list":[)"
+        << R"({"name":"fdm_filament_pet","sub_path":"filament/pet.json","filament_id":"GFL99"}]})";
+    fs::create_directories(library_pet.parent_path());
+    auto write_library_pet = [&](double density) {
+        std::ofstream(library_pet.string())
+            << R"({"type":"filament","name":"fdm_filament_pet","from":"system",)"
+            << R"("filament_id":"GFL99","instantiation":"false",)"
+            << R"("filament_type":["PETG"],"filament_density":[")" << density << R"("]})";
+    };
+    write_library_pet(1.27);
+
+    std::ofstream((dir.path() / "Acme.json").string())
+        << R"({"version":"1.0.0","name":"Acme","filament_list":[)"
+        << R"({"name":"Acme PETG","sub_path":"filament/petg.json","filament_id":"GFA00"},)"
+        << R"({"name":"Acme PETG Matte","sub_path":"filament/petg_matte.json","filament_id":"GFA01"}]})";
+    fs::create_directories(filament_dir);
+    auto write_child = [&](const std::string &file, const std::string &name, const std::string &filament_id) {
+        std::ofstream((filament_dir / file).string())
+            << R"({"type":"filament","name":")" << name << R"(","from":"system",)"
+            << R"("filament_id":")" << filament_id << R"(","instantiation":"true","inherits":"fdm_filament_pet"})";
+    };
+    write_child("petg.json", "Acme PETG", "GFA00");
+    write_child("petg_matte.json", "Acme PETG Matte", "GFA01");
+
+    auto density = [](const DynamicPrintConfig &config) {
+        return config.option<ConfigOptionFloats>("filament_density")->values.front();
+    };
+
+    PresetBundle       bundle;
+    DynamicPrintConfig first;
+    first.option<ConfigOptionString>(BBL_JSON_KEY_INHERITS, true)->value = "fdm_filament_pet";
+    std::string error;
+    REQUIRE(bundle.resolve_preset_config(first, Preset::TYPE_FILAMENT, (filament_dir / "petg.json").string(),
+                                         ForwardCompatibilitySubstitutionRule::EnableSilent, error));
+    CHECK_THAT(density(first), Catch::Matchers::WithinAbs(1.27, 1e-6));
+
+    // Only a reload would see this change.
+    write_library_pet(1.5);
+
+    DynamicPrintConfig second;
+    Preset::Type       type = Preset::TYPE_INVALID;
+    REQUIRE(bundle.resolve_preset_config_type(second, type, (filament_dir / "petg_matte.json").string(),
+                                              ForwardCompatibilitySubstitutionRule::EnableSilent, error));
+    CHECK(type == Preset::TYPE_FILAMENT);
+    CHECK_THAT(density(second), Catch::Matchers::WithinAbs(1.27, 1e-6));
+}
+
+TEST_CASE("Manifest-backed resolution shares the library between vendors under one root", "[Preset][Bundle][Regression]")
+{
+    ScopedTemporaryDir dir;
+    const fs::path      library_dir = dir.path() / PresetBundle::ORCA_FILAMENT_LIBRARY / "filament";
+
+    std::ofstream((dir.path() / (std::string(PresetBundle::ORCA_FILAMENT_LIBRARY) + ".json")).string())
+        << R"({"version":"1.0.0","name":"OrcaFilamentLibrary","filament_list":[)"
+        << R"({"name":"fdm_filament_pet","sub_path":"filament/pet.json","filament_id":"GFL99"},)"
+        << R"({"name":"Generic PETG","sub_path":"filament/generic_petg.json","filament_id":"GFL98"}]})";
+    fs::create_directories(library_dir);
+    auto write_library_pet = [&](double density) {
+        std::ofstream((library_dir / "pet.json").string())
+            << R"({"type":"filament","name":"fdm_filament_pet","from":"system",)"
+            << R"("filament_id":"GFL99","instantiation":"false",)"
+            << R"("filament_type":["PETG"],"filament_density":[")" << density << R"("]})";
+    };
+    write_library_pet(1.27);
+    std::ofstream((library_dir / "generic_petg.json").string())
+        << R"({"type":"filament","name":"Generic PETG","from":"system",)"
+        << R"("filament_id":"GFL98","instantiation":"true","inherits":"fdm_filament_pet"})";
+
+    auto write_vendor = [&](const std::string &vendor, const std::string &filament_id) {
+        const fs::path filament_dir = dir.path() / vendor / "filament";
+        fs::create_directories(filament_dir);
+        std::ofstream((dir.path() / (vendor + ".json")).string())
+            << R"({"version":"1.0.0","name":")" << vendor << R"(","filament_list":[)"
+            << R"({"name":")" << vendor << R"( PETG","sub_path":"filament/petg.json","filament_id":")" << filament_id << R"("}]})";
+        std::ofstream((filament_dir / "petg.json").string())
+            << R"({"type":"filament","name":")" << vendor << R"( PETG","from":"system",)"
+            << R"("filament_id":")" << filament_id << R"(","instantiation":"true","inherits":"fdm_filament_pet"})";
+        return filament_dir / "petg.json";
+    };
+    const fs::path acme_petg = write_vendor("Acme", "GFA00");
+    const fs::path beta_petg = write_vendor("Beta", "GFB00");
+
+    auto density = [&](PresetBundle &bundle, const fs::path &file) {
+        DynamicPrintConfig raw;
+        raw.option<ConfigOptionString>(BBL_JSON_KEY_INHERITS, true)->value = "fdm_filament_pet";
+        std::string error;
+        REQUIRE(bundle.resolve_preset_config(raw, Preset::TYPE_FILAMENT, file.string(),
+                                             ForwardCompatibilitySubstitutionRule::EnableSilent, error));
+        return raw.option<ConfigOptionFloats>("filament_density")->values.front();
+    };
+
+    PresetBundle bundle;
+    CHECK_THAT(density(bundle, acme_petg), Catch::Matchers::WithinAbs(1.27, 1e-6));
+
+    // Only a reload would see this change.
+    write_library_pet(1.5);
+    CHECK_THAT(density(bundle, beta_petg), Catch::Matchers::WithinAbs(1.27, 1e-6));
+    CHECK_THAT(density(bundle, library_dir / "generic_petg.json"), Catch::Matchers::WithinAbs(1.27, 1e-6));
+
+    PresetBundle fresh;
+    CHECK_THAT(density(fresh, beta_petg), Catch::Matchers::WithinAbs(1.5, 1e-6));
+}
+
 // Orca: a filament in the Orca Filament Library that names its compatible printers has to hide the generic
 // library filament sharing its alias, the same way a vendor owned filament does. Otherwise both are compatible
 // with that printer and the plater combo box lists the shared alias twice.
@@ -1000,7 +1326,6 @@ TEST_CASE("A printer specific filament supersedes the generic library filament w
     CHECK(is_compatible_with_printer(generic_lib, PresetWithVendorProfile(*printer_c, nullptr)));
 }
 
-
 namespace {
 
 // One system printer plus the filament presets a machine facing dialog has to choose between:
@@ -1221,6 +1546,2807 @@ TEST_CASE("Sizing the filament list to a multi-tool nozzle count keeps mixed slo
     }
 }
 
+// A "published" 3MF keeps the user's currently-selected presets and overlays only the
+// author-selected process keys onto the edited preset (mirrors the GUI load path: normalize
+// before load_config_model, then the overlay in load_config_file_config).
+TEST_CASE("Published 3MF overlays only the author-selected process keys onto the edited preset", "[Preset][Bundle][Published]")
+{
+    // The file config the GUI builds from a .3mf's project settings.
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // The loader derives the filament count from filament_colour and throws when it is
+        // empty; a 3mf always carries it.
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        config.opt_float("layer_height") = 0.28;                       // process scalar
+        config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values = { 140., 150. }; // matching-size vector
+        config.opt<ConfigOptionStrings>("post_process")->values = { "script-a", "script-b" }; // mismatched vector
+        config.opt<ConfigOptionInts>("nozzle_temperature")->values = { 220 }; // filament key (not applied anywhere)
+        // Structural (denylisted) key: must be silently ignored. full_print_config() omits the
+        // *_settings_id keys, so create one explicitly.
+        config.opt_string("print_settings_id", true) = "file process";
+        config.opt<ConfigOptionFloats>("flush_multiplier")->values = { 2., 2. }; // must NOT cross over
+        config.opt<ConfigOptionFloats>("wipe_tower_x")->values = { 100. };       // plate geometry, does cross over
+        config.opt<ConfigOptionFloat>("wipe_tower_rotation_angle")->value = 45.; // published-only plate geometry, crosses over
+        config.option("curr_bed_type")->setInt(BedType::btPC);                   // must NOT cross over
+        return config;
+    };
+
+    const std::vector<std::string> published_keys = {
+        "layer_height", "wiping_volumes_extruders", "post_process", "nozzle_temperature", "print_settings_id"
+    };
+
+    PresetBundle bundle;
+    const std::string pre_load_name = bundle.prints.get_edited_preset().name;
+    const size_t      pre_load_size = bundle.prints.size();
+
+    // The edited presets are the overlay targets: recognizable pre-load values.
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.1;
+    bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values = { 10., 20. };
+    bundle.prints.get_edited_preset().config.opt<ConfigOptionStrings>("post_process")->values = { "existing-script" };
+    bundle.prints.get_edited_preset().config.opt_string("print_settings_id") = "user process";
+    // Capture the ctor-seeded project_config values so the assertions below check the load
+    // leaves them untouched rather than hardcoding the defaults.
+    const std::vector<std::string> seed_filament_colour  = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+    const std::vector<double>      seed_flush_multiplier = bundle.project_config.opt<ConfigOptionFloats>("flush_multiplier")->values;
+    const int                      seed_bed_type         = bundle.project_config.option("curr_bed_type")->getInt();
+
+    DynamicPrintConfig config = make_file_config();
+    // The GUI normalizes the config before load; mirror that so only the production path runs.
+    Preset::normalize(config);
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = published_keys;
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // a) Process scalar overlaid; matching-size vector applied, mismatched one lands in
+    // skipped_keys; applied keys are not reported.
+    CHECK_THAT(bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.28, 0.000001));
+    check_double_vector(bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values, { 140., 150. });
+    CHECK(bundle.prints.get_edited_preset().config.opt<ConfigOptionStrings>("post_process")->values == std::vector<std::string>{ "existing-script" });
+    CHECK(contains_key(pub.skipped_keys, "post_process"));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "layer_height"));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "wiping_volumes_extruders"));
+
+    // b) A filament key is never applied anywhere and is reported as skipped.
+    CHECK(bundle.prints.get_edited_preset().config.option("nozzle_temperature") == nullptr);
+    CHECK(contains_key(pub.skipped_keys, "nozzle_temperature"));
+
+    // c) A structural key is silently ignored: neither applied nor reported as skipped.
+    CHECK(bundle.prints.get_edited_preset().config.opt_string("print_settings_id") == "user process");
+    CHECK_FALSE(contains_key(pub.skipped_keys, "print_settings_id"));
+
+    // d) Only plate/bed geometry crosses in published mode: filament/purge data and bed type
+    // stay at the ctor seeds.
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values == seed_filament_colour);
+    CHECK(bundle.project_config.opt<ConfigOptionFloats>("flush_multiplier")->values == seed_flush_multiplier);
+    CHECK(bundle.project_config.option("curr_bed_type")->getInt() == seed_bed_type);
+    check_double_vector(bundle.project_config.opt<ConfigOptionFloats>("wipe_tower_x")->values, { 100. });
+    CHECK_THAT(bundle.project_config.opt<ConfigOptionFloat>("wipe_tower_rotation_angle")->value, Catch::Matchers::WithinAbs(45., 0.000001));
+
+    // e) The published path keeps the user's currently-selected presets: same preset, same size.
+    CHECK(bundle.prints.get_edited_preset().name == pre_load_name);
+    CHECK(bundle.prints.size() == pre_load_size);
+
+    // f) Non-published control: the overlay is disabled, the file's presets are imported
+    // instead, and no skipped_keys are produced.
+    PresetBundle     control_bundle;
+    const size_t     control_pre_size = control_bundle.prints.size();
+    PublishedConfig  control_pub;
+    control_pub.published      = false;
+    control_pub.published_keys = published_keys;
+    DynamicPrintConfig control_config = make_file_config();
+    Preset::normalize(control_config);
+    control_bundle.load_config_model("test.3mf", std::move(control_config), Semver(), &control_pub);
+
+    CHECK(control_pub.skipped_keys.empty());
+    CHECK(control_bundle.prints.size() > control_pre_size);
+    // The file's layer_height reached the edited preset via the normal import, not the overlay.
+    CHECK_THAT(control_bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.28, 0.000001));
+}
+
+// The published printer overlay is restricted to the publishable retraction/z-hop allowlist:
+// matching-size vectors apply, mismatched vectors are reported as skipped, and any other
+// printer-class key (e.g. machine_start_gcode) is contract-excluded (never applied, never
+// reported).
+TEST_CASE("Published 3MF overlays only the allowlisted retraction and z-hop keys onto the edited printer preset", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    Preset::normalize(config);
+    config.opt<ConfigOptionFloats>("retraction_length")->values = { 1.4 };         // matching size (1 extruder)
+    config.opt<ConfigOptionFloats>("retraction_speed")->values = { 45., 55. };     // size 2: mismatched
+    config.opt_string("machine_start_gcode") = "G28 ; from file";                  // outside the allowlist
+
+    PresetBundle bundle;
+    bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8 };
+    // A recognizable non-default value: the skipped mismatch below must leave it untouched
+    // (asserting the default instead would silently test PrintConfig's retraction_speed).
+    bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_speed")->values = { 33. };
+    bundle.printers.get_edited_preset().config.opt_string("machine_start_gcode") = "G28 ; user";
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = { "retraction_length", "retraction_speed", "machine_start_gcode" };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // Matching-size retraction vector applied; mismatched vector reported as skipped and the
+    // receiver's own value survives.
+    check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 1.4 });
+    check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_speed")->values, { 33. });
+    CHECK(contains_key(pub.skipped_keys, "retraction_speed"));
+    // Contract-excluded printer key: silently ignored, absent from skipped_keys.
+    CHECK(bundle.printers.get_edited_preset().config.opt_string("machine_start_gcode") == "G28 ; user");
+    CHECK_FALSE(contains_key(pub.skipped_keys, "machine_start_gcode"));
+}
+
+// A published 3MF carries per-slot material keys; on load they are applied positionally to the
+// receiver's slot N (a key-only entry has no type gate), written onto the slot's stored preset
+// in place.
+TEST_CASE("Published 3MF applies positional material keys onto the receiver's material presets", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // Two filament slots; filament_diameter drives the normalized per-slot vector sizes.
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        // Keep the multi-extruder consistency validation happy for a 2-slot config.
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFT99" };
+        // Author per-slot retraction values. These are per-filament override keys that are not
+        // members of the static PrintRegionConfig, so full_print_config() omits them and they
+        // must be created explicitly (as nullable, matching the real 3MF project config).
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 1.2 };
+        config.option<ConfigOptionFloatsNullable>("filament_z_hop", true)->values = { 0.2, 0.3 };
+        return config;
+    };
+
+    PresetBundle bundle;
+    Preset &pla  = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.filament_id = "GFL99";
+    pla.config.opt_string("filament_type", 0u)   = "PLA";
+    pla.config.opt_string("filament_vendor", 0u) = "Generic";
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    pla.config.opt<ConfigOptionStrings>("filament_settings_id")->values = { "receiver-pla" };
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.filament_id = "GFT99";
+    petg.config.opt_string("filament_type", 0u)   = "PETG";
+    petg.config.opt_string("filament_vendor", 0u) = "Generic";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_z_hop", true)->values = { 0.1 };
+    bundle.filament_presets = { "My PLA", "My PETG" };
+
+    PublishedMaterialEntry pla_entry;
+    pla_entry.filament_id = "GFL99";
+    pla_entry.slot        = 0; // the author's PLA slot
+    pla_entry.keys        = { "filament_retraction_length", "filament_settings_id" };
+    PublishedMaterialEntry petg_entry;
+    petg_entry.filament_id = "GFT99";
+    petg_entry.slot        = 1; // the author's PETG slot
+    petg_entry.keys        = { "filament_retraction_length", "filament_z_hop" };
+    // A slot-less entry (no slot field, only possible in hand-crafted files): silently skipped.
+    PublishedMaterialEntry noslot_entry;
+    noslot_entry.filament_type = "ABS";
+    noslot_entry.keys          = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.material_keys  = { pla_entry, petg_entry, noslot_entry };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The author's slot values are written onto the receiver's stored presets in place.
+    check_double_vector(bundle.filaments.find_preset("My PLA")->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    check_double_vector(bundle.filaments.find_preset("My PETG")->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 1.2 });
+    check_double_vector(bundle.filaments.find_preset("My PETG")->config.opt<ConfigOptionFloatsNullable>("filament_z_hop")->values, { 0.3 });
+    // Structural keys inside a material entry are silently ignored: the receiver's own
+    // filament_settings_id is untouched and nothing is reported for it.
+    CHECK(bundle.filaments.find_preset("My PLA")->config.opt<ConfigOptionStrings>("filament_settings_id")->values == std::vector<std::string>{ "receiver-pla" });
+    CHECK_FALSE(contains_key(pub.skipped_keys, "material:GFL99 (filament_settings_id)"));
+    // Everything applied; the slot-less entry produced no skipped entry.
+    CHECK(pub.skipped_keys.empty());
+}
+
+// A "full publish" slot serializes the whole filament. On load the slot always receives a
+// standalone detached copy of the author's material - created even when the receiver's own
+// material matches the published type - and no receiver library preset is ever mutated.
+TEST_CASE("Published 3MF full-published slots are imported as standalone detached copies", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // Two author slots; filament_diameter drives the normalized per-slot vector sizes.
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFT99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 1.2 };
+        return config;
+    };
+    // The full dump of slot 0, publishing the whole filament as type "ABS".
+    auto make_full_abs_entry = [] {
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.full                = true;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "ABS";
+        entry.full_keys           = { "filament_retraction_length" };
+        return entry;
+    };
+
+    SECTION("type match still creates a detached copy instead of mutating the receiver material") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        bundle.filament_presets = { "My PLA", "My PLA" };
+
+        PublishedMaterialEntry full = make_full_abs_entry();
+        full.publish_type_value     = "PLA"; // author requires PLA, receiver slot is PLA
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { full };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The type matches, but the import still detaches: the slot lands on a fresh copy
+        // named from the published type (no identity fields in this entry), carrying the
+        // author's values; the receiver's own material is untouched.
+        CHECK(bundle.filament_presets[0] == "PLA");
+        Preset *copy = bundle.filaments.find_preset("PLA", false, true);
+        REQUIRE(copy != nullptr);
+        check_double_vector(copy->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        CHECK(pub.skipped_keys.empty());
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 0: My PLA -> PLA");
+    }
+
+    SECTION("type mismatch also detaches: a fresh same-type copy replaces the slot") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        Preset &abs = add_inmemory_preset(bundle.filaments, "My ABS");
+        abs.config.opt_string("filament_type", 0u) = "ABS";
+        abs.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.3 };
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_full_abs_entry() };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 1);
+        // No substitution search runs: a brand-new copy named after the published type is
+        // created and both pre-existing presets stay exactly as they were.
+        CHECK(bundle.filament_presets[0] == "ABS");
+        Preset *copy = bundle.filaments.find_preset("ABS", false, true);
+        REQUIRE(copy != nullptr);
+        check_double_vector(copy->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        check_double_vector(bundle.filaments.find_preset("My ABS", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.3 });
+        check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        CHECK(pub.skipped_keys.empty());
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 0: My PLA -> ABS");
+    }
+
+    SECTION("the author's identity rides on the copy when the type has no library match") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        Preset &other = add_inmemory_preset(bundle.filaments, "Other PLA");
+        other.config.opt_string("filament_type", 0u) = "PLA";
+        other.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.7 };
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry full = make_full_abs_entry();
+        // The dump carries the identity too, so the created copy takes the author's type
+        // and vendor instead of the baseline clone's.
+        full.full_keys = { "filament_retraction_length", "filament_type", "filament_vendor" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { full };
+        DynamicPrintConfig config = make_file_config();
+        // The author's slot 0 really is ABS.
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "ABS", "PETG" };
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // No ABS preset needs to exist in the library: the copy carries the author's values,
+        // type and vendor included. Neither receiver preset was touched.
+        CHECK(bundle.filament_presets[0] == "ABS");
+        Preset *copy = bundle.filaments.find_preset("ABS", false, true);
+        REQUIRE(copy != nullptr);
+        check_double_vector(copy->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        CHECK(copy->config.opt_string("filament_type", 0u) == "ABS");
+        CHECK(copy->config.opt_string("filament_vendor", 0u) == "Generic");
+        check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt_string("filament_type", 0u) == "PLA");
+        check_double_vector(bundle.filaments.find_preset("Other PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.7 });
+        CHECK(pub.skipped_keys.empty());
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 0: My PLA -> ABS");
+    }
+}
+
+// The author's preset name travels in the file and names the created standalone copy (variant
+// tail stripped), regardless of what the receiver's library holds: an exact-name library preset
+// is never reused nor mutated.
+TEST_CASE("Published 3MF imports a full material under the author's stripped name", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "OGFL99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9 };
+        return config;
+    };
+
+    auto add_pla = [](PresetBundle &bundle, const char *name, const char *id, const char *vendor, const char *setting_id) {
+        Preset &preset = add_inmemory_preset(bundle.filaments, name);
+        preset.filament_id = id;
+        preset.setting_id  = setting_id;
+        preset.config.opt_string("filament_type", 0u) = "PLA";
+        preset.config.opt_string("filament_vendor", 0u) = vendor;
+        preset.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        return &preset;
+    };
+
+    SECTION("an exact-name library preset exists: a detached copy is created beside it") {
+        PresetBundle bundle;
+        Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+        add_pla(bundle, "Generic PLA @System", "OGFL99", "Generic", "RcBNzytWgwRrwXXz");
+        add_pla(bundle, "Bambu PLA Basic @System", "OGFA00", "Bambu Lab", "zkc85XTKi4cb6cOw");
+        bundle.filament_presets = { "My PETG" };
+
+        PublishedMaterialEntry entry;
+        entry.slot               = 0;
+        entry.full               = true;
+        entry.publish_type       = true;
+        entry.publish_type_value = "PLA";
+        entry.filament_id        = "OGFL99";
+        entry.filament_vendor    = "Generic";
+        entry.setting_id         = "RcBNzytWgwRrwXXz";
+        entry.preset_name        = "Generic PLA @System";
+        entry.full_keys          = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The copy is named after the stripped author name; the receiver's exact-name preset
+        // keeps its own values.
+        CHECK(bundle.filament_presets[0] == "Generic PLA");
+        check_double_vector(bundle.filaments.find_preset("Generic PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        check_double_vector(bundle.filaments.find_preset("Generic PLA @System", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        check_double_vector(bundle.filaments.find_preset("My PETG", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.6 });
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Generic PLA");
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    SECTION("only the name is present (broken/stale ids): the copy is still created") {
+        PresetBundle bundle;
+        Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+        add_pla(bundle, "Generic PLA @System", "OGFL99", "Generic", "RcBNzytWgwRrwXXz");
+        add_pla(bundle, "Bambu PLA Basic @System", "OGFA00", "Bambu Lab", "zkc85XTKi4cb6cOw");
+        bundle.filament_presets = { "My PETG" };
+
+        PublishedMaterialEntry entry;
+        entry.slot               = 0;
+        entry.full               = true;
+        entry.publish_type       = true;
+        entry.publish_type_value = "PLA";
+        entry.preset_name        = "Generic PLA @System";
+        entry.full_keys          = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets[0] == "Generic PLA");
+        check_double_vector(bundle.filaments.find_preset("Bambu PLA Basic @System", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Generic PLA");
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    SECTION("grown slot (author slot 1) receives its own detached copy") {
+        auto two_slot_config = [] {
+            DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+            config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+            config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+            config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+            config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#FFFF00" };
+            config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA" };
+            config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+            config.opt<ConfigOptionStrings>("filament_ids")->values = { "OGFL99", "OGFL99" };
+            config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 0.8 };
+            return config;
+        };
+
+        PresetBundle bundle;
+        Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+        add_pla(bundle, "Generic PLA @System", "OGFL99", "Generic", "RcBNzytWgwRrwXXz");
+        add_pla(bundle, "Bambu PLA Basic @System", "OGFA00", "Bambu Lab", "zkc85XTKi4cb6cOw");
+        bundle.filament_presets = { "My PETG" };
+
+        PublishedMaterialEntry entry;
+        entry.slot               = 1;
+        entry.full               = true;
+        entry.publish_type       = true;
+        entry.publish_type_value = "PLA";
+        entry.preset_name        = "Generic PLA @System";
+        entry.full_keys          = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = two_slot_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 2);
+        CHECK(bundle.filament_presets[0] == "My PETG");
+        // The grown slot seeds the receiver's last preset ("My PETG"), then the full material
+        // detaches onto a copy carrying the author's slot-1 value; "Generic PLA @System" is
+        // left untouched.
+        CHECK(bundle.filament_presets[1] == "Generic PLA");
+        check_double_vector(bundle.filaments.find_preset("Generic PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.8 });
+        check_double_vector(bundle.filaments.find_preset("Generic PLA @System", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 1: My PETG -> Generic PLA");
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// The stripped author name can collide with an existing library preset ("Generic PLA"): the
+// created copy must uniquify with the "(Published)" suffix rather than overwrite, reuse or
+// mutate any of the receiver's own presets.
+TEST_CASE("Published 3MF uniquifies an imported full material name on collision", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    // A legacy bundle preset literally named "Generic PLA" - collides with the stripped name.
+    Preset &bare = add_inmemory_preset(bundle.filaments, "Generic PLA");
+    bare.config.opt_string("filament_type", 0u) = "PLA";
+    bare.config.opt_string("filament_vendor", 0u) = "Generic";
+    bare.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    // The author's exact preset.
+    Preset &qidi = add_inmemory_preset(bundle.filaments, "Generic PLA @Qidi Q2 0.4 nozzle");
+    qidi.config.opt_string("filament_type", 0u) = "PLA";
+    qidi.config.opt_string("filament_vendor", 0u) = "Generic";
+    qidi.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    // The Orca library preset.
+    Preset &sys = add_inmemory_preset(bundle.filaments, "Generic PLA @System");
+    sys.config.opt_string("filament_type", 0u) = "PLA";
+    sys.config.opt_string("filament_vendor", 0u) = "Generic";
+    sys.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    bundle.filament_presets = { "My PETG" };
+
+    PublishedMaterialEntry entry;
+    entry.slot               = 0;
+    entry.full               = true;
+    entry.publish_type       = true;
+    entry.publish_type_value = "PLA";
+    entry.preset_name        = "Generic PLA @Qidi Q2 0.4 nozzle";
+    entry.full_keys          = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The copy lands beside the collision, suffixed; every pre-existing preset keeps its own
+    // values.
+    CHECK(bundle.filament_presets[0] == "Generic PLA (Published)");
+    check_double_vector(bundle.filaments.find_preset("Generic PLA (Published)", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    check_double_vector(bundle.filaments.find_preset("Generic PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+    check_double_vector(bundle.filaments.find_preset("Generic PLA @Qidi Q2 0.4 nozzle", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+    check_double_vector(bundle.filaments.find_preset("Generic PLA @System", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+    REQUIRE(pub.material_replacements.size() == 1);
+    CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Generic PLA (Published)");
+    CHECK(pub.skipped_keys.empty());
+}
+
+// The overlay writes onto the edited layer only when that layer survives the load (slot 0's
+// preset still matches the edited preset). When the user views a non-first slot's material and
+// the published entry targets that slot, the final re-select would destroy the edited layer -
+// so the values must land on the stored preset instead and survive.
+TEST_CASE("Published 3MF writes to the stored preset when the edited layer is re-selected away", "[Preset][Bundle][Published]")
+{
+    // Two-slot author config: slot 1 carries the published retraction value.
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PETG", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFT99", "GFL99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6, 0.9 };
+        return config;
+    };
+
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    bundle.filament_presets = { "My PETG", "My PLA" };
+    // The user is viewing slot 1's material.
+    REQUIRE(bundle.filaments.select_preset_by_name("My PLA", false));
+
+    PublishedMaterialEntry entry;
+    entry.slot                = 1;
+    entry.publish_type        = true;
+    entry.publish_type_value  = "PLA";
+    entry.publish_color       = true;
+    entry.color               = "#ABCDEF";
+    entry.keys                = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The published values survived on the stored preset (the edited layer was re-selected to
+    // slot 0's material and must not have been the only copy).
+    Preset *stored = bundle.filaments.find_preset("My PLA", false, true);
+    REQUIRE(stored != nullptr);
+    CHECK(stored->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    check_double_vector(stored->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    // The load re-selected slot 0's material, mirroring a normal project load.
+    CHECK(bundle.filaments.get_edited_preset().name == "My PETG");
+    // Selecting the slot's material afterwards surfaces the applied values.
+    REQUIRE(bundle.filaments.select_preset_by_name("My PLA", false));
+    CHECK(bundle.filaments.get_edited_preset().config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    check_double_vector(bundle.filaments.get_edited_preset().config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    CHECK(pub.skipped_keys.empty());
+}
+
+// The created copy is named after the author's preset with the "@variant" tail stripped;
+// trailing whitespace left behind by the truncation must be trimmed away, and names without
+// a tail pass through unchanged.
+TEST_CASE("publish_material_base_name strips the variant tail from a published preset name", "[Preset][Bundle][Published]")
+{
+    CHECK(publish_material_base_name("Generic PLA @System") == "Generic PLA");
+    CHECK(publish_material_base_name("Generic PLA @Qidi Q2 0.4 nozzle") == "Generic PLA");
+    // Truncation at '@' leaves the space before the tail; it must not survive.
+    CHECK(publish_material_base_name("Generic PLA  @System") == "Generic PLA");
+    CHECK(publish_material_base_name("Voron Generic PLA") == "Voron Generic PLA");
+    CHECK(publish_material_base_name("") == "");
+    // A tail-only name strips to nothing; the caller falls back to identity fields.
+    CHECK(publish_material_base_name("@System").empty());
+}
+
+// A full-published material arrives as a brand-new standalone preset: parentless, visible,
+// project-embedded ("Preset Inside Project"), carrying the author's values and colour - and
+// never touching any of the receiver's own presets.
+TEST_CASE("Published 3MF imports a full material as a detached project-embedded preset", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    Preset &spare = add_inmemory_preset(bundle.filaments, "Spare PLA");
+    spare.config.opt_string("filament_type", 0u) = "PLA";
+    spare.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.4 };
+    bundle.filament_presets = { "My PETG" };
+
+    PublishedMaterialEntry entry;
+    entry.slot                = 0;
+    entry.full                = true;
+    entry.publish_type        = true;
+    entry.publish_type_value  = "PLA";
+    entry.publish_color       = true;
+    entry.color               = "#ABCDEF";
+    entry.filament_id         = "AFL01";
+    entry.setting_id          = "Sid000111222";
+    entry.preset_name         = "Author PLA @Vendor";
+    entry.full_keys           = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The slot lands on the freshly created copy, named after the stripped author name.
+    CHECK(bundle.filament_presets[0] == "Author PLA");
+    Preset *copy = bundle.filaments.find_preset("Author PLA", false, true);
+    REQUIRE(copy != nullptr);
+    // Detached + project-embedded contract.
+    CHECK(copy->is_project_embedded);
+    CHECK(copy->inherits().empty());
+    CHECK(copy->setting_id.empty());
+    CHECK(copy->vendor == nullptr);
+    CHECK_FALSE(copy->is_system);
+    CHECK_FALSE(copy->is_default);
+    CHECK_FALSE(copy->is_external);
+    CHECK(copy->is_visible);
+    CHECK(copy->filament_id == "AFL01");
+    CHECK(copy->config.opt<ConfigOptionStrings>("filament_settings_id")->values == std::vector<std::string>{ "Author PLA" });
+    // The published values and colour live on the copy.
+    check_double_vector(copy->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    CHECK(copy->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    // Universally compatible: no printer/print restrictions survive the import.
+    CHECK(copy->config.opt<ConfigOptionStrings>("compatible_printers")->values.empty());
+    CHECK(copy->config.opt<ConfigOptionStrings>("compatible_prints")->values.empty());
+    CHECK(copy->config.opt<ConfigOptionString>("compatible_printers_condition")->value.empty());
+    CHECK(copy->config.opt<ConfigOptionString>("compatible_prints_condition")->value.empty());
+    // Nothing pre-existing was touched.
+    check_double_vector(bundle.filaments.find_preset("My PETG", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.6 });
+    check_double_vector(bundle.filaments.find_preset("Spare PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.4 });
+    CHECK(pub.skipped_keys.empty());
+    REQUIRE(pub.material_replacements.size() == 1);
+    CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Author PLA");
+}
+
+// Compatibility restrictions riding on the receiver's baseline preset must not leak onto the
+// imported copy: a detached full material is usable with every printer and print profile.
+TEST_CASE("Published 3MF clears printer restrictions on the imported full material", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &restricted = add_inmemory_preset(bundle.filaments, "Restricted PLA");
+    restricted.config.opt_string("filament_type", 0u) = "PLA";
+    restricted.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    restricted.config.set_key_value("compatible_printers", new ConfigOptionStrings({ "Unrelated Printer" }));
+    restricted.config.set_key_value("compatible_prints", new ConfigOptionStrings({ "Unrelated Print" }));
+    restricted.config.option<ConfigOptionString>("compatible_printers_condition", true)->value = "printer_settings_id==\"Nope\"";
+    restricted.config.option<ConfigOptionString>("compatible_prints_condition", true)->value = "print_settings_id==\"Nope\"";
+    bundle.filament_presets = { "Restricted PLA" };
+
+    PublishedMaterialEntry entry;
+    entry.slot                = 0;
+    entry.full                = true;
+    entry.publish_type        = true;
+    entry.publish_type_value  = "PLA";
+    entry.full_keys           = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The copy (named from the published type; no identity fields) has no restrictions left.
+    CHECK(bundle.filament_presets[0] == "PLA");
+    Preset *copy = bundle.filaments.find_preset("PLA", false, true);
+    REQUIRE(copy != nullptr);
+    CHECK(copy->config.opt<ConfigOptionStrings>("compatible_printers")->values.empty());
+    CHECK(copy->config.opt<ConfigOptionStrings>("compatible_prints")->values.empty());
+    CHECK(copy->config.opt<ConfigOptionString>("compatible_printers_condition")->value.empty());
+    CHECK(copy->config.opt<ConfigOptionString>("compatible_prints_condition")->value.empty());
+    // The receiver's own restricted preset keeps its restrictions.
+    const Preset *original = bundle.filaments.find_preset("Restricted PLA", false, true);
+    REQUIRE(original != nullptr);
+    CHECK(original->config.opt<ConfigOptionStrings>("compatible_printers")->values == std::vector<std::string>{ "Unrelated Printer" });
+    CHECK(original->config.opt<ConfigOptionString>("compatible_printers_condition")->value == "printer_settings_id==\"Nope\"");
+    CHECK(pub.skipped_keys.empty());
+}
+
+// Identical Full materials (same setting_id + preset_name identity) share one created
+// instance: an author who pointed several slots at one material gets one standalone copy,
+// and the first entry's slot values win.
+TEST_CASE("Published 3MF shares one imported copy between identical full slots", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "AFL01", "AFL01" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 0.8 };
+        return config;
+    };
+    auto make_entry = [](int slot) {
+        PublishedMaterialEntry entry;
+        entry.slot                = slot;
+        entry.full                = true;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PLA";
+        entry.filament_id         = "AFL01";
+        entry.setting_id          = "Sid000111222";
+        entry.preset_name         = "Author PLA @Vendor";
+        entry.full_keys           = { "filament_retraction_length" };
+        return entry;
+    };
+
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    Preset &other = add_inmemory_preset(bundle.filaments, "Other PETG");
+    other.config.opt_string("filament_type", 0u) = "PETG";
+    other.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.65 };
+    bundle.filament_presets = { "My PETG", "Other PETG" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_entry(0), make_entry(1) };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // Both slots point at the single shared copy; no second "(Published)" instance exists.
+    REQUIRE(bundle.filament_presets.size() == 2);
+    CHECK(bundle.filament_presets[0] == "Author PLA");
+    CHECK(bundle.filament_presets[1] == "Author PLA");
+    CHECK(bundle.filaments.find_preset("Author PLA", false, true) != nullptr);
+    CHECK(bundle.filaments.find_preset("Author PLA (Published)", false, true) == nullptr);
+    // The first entry's slot values won.
+    check_double_vector(bundle.filaments.find_preset("Author PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    // Both slots reported, same target; originals untouched.
+    REQUIRE(pub.material_replacements.size() == 2);
+    CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Author PLA");
+    CHECK(pub.material_replacements[1] == "slot 1: Other PETG -> Author PLA");
+    check_double_vector(bundle.filaments.find_preset("My PETG", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.6 });
+    check_double_vector(bundle.filaments.find_preset("Other PETG", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.65 });
+    CHECK(pub.skipped_keys.empty());
+}
+
+// Without a preset name the copy falls back to the stable material id; fully anonymous
+// hand-crafted entries never share instances between slots (their dedup key is slot-scoped).
+TEST_CASE("Published 3MF names unidentified full materials from their fallback fields", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFT99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 1.2 };
+        return config;
+    };
+
+    SECTION("empty preset_name falls back to the filament_id") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.full                = true;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PLA";
+        entry.filament_id         = "AFL01";
+        entry.full_keys           = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = published_pla_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets[0] == "AFL01");
+        CHECK(bundle.filaments.find_preset("AFL01", false, true) != nullptr);
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    SECTION("fully anonymous entries get slot-scoped copies") {
+        PresetBundle bundle;
+        Preset &first = add_inmemory_preset(bundle.filaments, "First PLA");
+        first.config.opt_string("filament_type", 0u) = "PLA";
+        first.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        Preset &second = add_inmemory_preset(bundle.filaments, "Second PLA");
+        second.config.opt_string("filament_type", 0u) = "PLA";
+        second.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.55 };
+        bundle.filament_presets = { "First PLA", "Second PLA" };
+
+        PublishedMaterialEntry entry0;
+        entry0.slot                = 0;
+        entry0.full                = true;
+        entry0.publish_type        = true;
+        entry0.publish_type_value  = "ABS"; // the only naming field present
+        entry0.full_keys           = { "filament_retraction_length" };
+        PublishedMaterialEntry entry1 = entry0;
+        entry1.slot                = 1;
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry0, entry1 };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // No shared identity: each slot gets its own uniquified copy.
+        CHECK(bundle.filament_presets[0] == "ABS");
+        CHECK(bundle.filament_presets[1] == "ABS (Published)");
+        CHECK(bundle.filaments.find_preset("ABS", false, true) != nullptr);
+        CHECK(bundle.filaments.find_preset("ABS (Published)", false, true) != nullptr);
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// Within-load dedup does not span loads: importing the same published file again into the same
+// session creates a second, uniquified copy instead of mutating or reusing the first.
+TEST_CASE("Re-importing a published full material uniquifies the second copy", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    bundle.filament_presets = { "My PETG" };
+
+    auto make_entry = [] {
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.full                = true;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PLA";
+        entry.filament_id         = "AFL01";
+        entry.setting_id          = "Sid000111222";
+        entry.preset_name         = "Author PLA @Vendor";
+        entry.full_keys           = { "filament_retraction_length" };
+        return entry;
+    };
+
+    for (int round = 0; round < 2; ++round) {
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_entry() };
+        DynamicPrintConfig config = published_pla_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        if (round == 0) {
+            CHECK(bundle.filament_presets[0] == "Author PLA");
+            CHECK(bundle.filaments.find_preset("Author PLA (Published)", false, true) == nullptr);
+        } else {
+            // The second import uniquifies beside the first instead of touching it.
+            CHECK(bundle.filament_presets[0] == "Author PLA (Published)");
+            check_double_vector(bundle.filaments.find_preset("Author PLA (Published)", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+            check_double_vector(bundle.filaments.find_preset("Author PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+            REQUIRE(pub.material_replacements.size() == 1);
+            CHECK(pub.material_replacements[0] == "slot 0: Author PLA -> Author PLA (Published)");
+        }
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// A partially-published slot can carry a curated type and/or colour. The colour is applied
+// regardless of the type match; a type mismatch with no same-type replacement keeps the
+// receiver's material and reports the slot's keys as skipped. The receiver's slot count grows
+// only as far as the highest slot with published content.
+TEST_CASE("Published 3MF partial slots apply colour and gate keys by the published type", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFT99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9, 1.2 };
+        return config;
+    };
+
+    SECTION("matching type applies the keys and the colour") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PLA";
+        entry.publish_color       = true;
+        entry.color               = "#ABCDEF";
+        entry.keys                = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // Type matched: keys and colour applied onto the receiver's preset in place.
+        Preset *pla_preset = bundle.filaments.find_preset("My PLA", false, true);
+        REQUIRE(pla_preset != nullptr);
+        check_double_vector(pla_preset->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        CHECK(pla_preset->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+        CHECK(pub.skipped_keys.empty());
+        CHECK(pub.material_replacements.empty());
+    }
+
+    SECTION("type mismatch without a replacement keeps the material and skips the keys") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "ABS"; // no ABS in the receiver library
+        entry.publish_color       = true;
+        entry.color               = "#ABCDEF";
+        entry.keys                = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The slot keeps the receiver's material: the colour applies in place, the keys are
+        // skipped.
+        CHECK(bundle.filament_presets[0] == "My PLA");
+        Preset *pla_preset = bundle.filaments.find_preset("My PLA", false, true);
+        REQUIRE(pla_preset != nullptr);
+        check_double_vector(pla_preset->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        CHECK(pla_preset->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+        CHECK(contains_key(pub.skipped_keys, "material:ABS (filament_retraction_length)"));
+        CHECK(pub.material_replacements.empty());
+    }
+
+    SECTION("receiver slot count grows to fit the highest published slot and assigns matching type preset") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.8 };
+        // The receiver has a single slot; the file carries two, only slot 1 is published.
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry entry;
+        entry.slot                = 1;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PETG";
+        entry.keys                = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The slot list was grown so author slot 1 has a material (the PETG preset), which
+        // then receives the author's values in place.
+        REQUIRE(bundle.filament_presets.size() == 2);
+        CHECK(bundle.filament_presets[1] == "My PETG");
+        check_double_vector(bundle.filaments.find_preset("My PETG", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 1.2 });
+        check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+    }
+}
+
+// The receiver's slot list grows only as far as the highest published slot: a file whose author
+// published nothing (or only a low slot) must not pull filler materials into the receiver's
+// setup, and the receiver never grows to the file's count.
+TEST_CASE("Published 3MF grows the receiver's slots only as far as the published slots", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // Four author slots (a 4-filament model).
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        return config;
+    };
+    auto add_pla_preset = [](PresetBundle &bundle) {
+        Preset &preset = add_inmemory_preset(bundle.filaments, "My PLA");
+        preset.config.opt_string("filament_type", 0u) = "PLA";
+        preset.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        return &preset;
+    };
+    auto make_color_entry = [](int slot) {
+        PublishedMaterialEntry entry;
+        entry.slot          = slot;
+        entry.publish_color = true;
+        entry.color         = "#ABCDEF";
+        return entry;
+    };
+
+    // A file whose author published nothing for any slot: the receiver's setup is untouched.
+    {
+        PresetBundle bundle;
+        add_pla_preset(bundle);
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedConfig pub;
+        pub.published = true; // no material entries at all
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets.size() == 1);
+        CHECK(bundle.filaments.find_preset("My PLA")->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#123456" });
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // Only slot 0 published: a single-slot receiver keeps its single slot; the file's other
+    // three slots pull nothing in.
+    {
+        PresetBundle bundle;
+        add_pla_preset(bundle);
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_color_entry(0) };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets.size() == 1);
+        // The published colour lands on the slot's preset in place.
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    }
+
+    // Slot 3 published: the receiver grows to 4 so the published slot exists. Unpublished
+    // filler slots repeat the receiver's last preset ("Add one filament" behaviour).
+    {
+        PresetBundle bundle;
+        add_pla_preset(bundle);
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_color_entry(3) };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 4);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+        CHECK(bundle.filament_presets[2] == "My PLA");
+        // Only "My PLA" exists in the library, so the published slot keeps the aliasing and the
+        // colour is written onto the shared preset (every slot references it).
+        CHECK(bundle.filament_presets[3] == "My PLA");
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+        // The project-level per-slot vectors were grown and seeded: fillers take their preset's
+        // colour, the published slot its published colour.
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values.size() == 4);
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[1] == "#123456");
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[3] == "#ABCDEF");
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_multi_colour")->values.size() == 4);
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour_type")->values.size() == 4);
+        CHECK(bundle.project_config.opt<ConfigOptionInts>("filament_map")->values.size() == 4);
+        CHECK(bundle.project_config.opt<ConfigOptionFloats>("flush_volumes_matrix")->values.size() == 16);
+    }
+
+    // Slots 0 and 2 published: the receiver grows to 3, never to the file's 4.
+    {
+        PresetBundle bundle;
+        add_pla_preset(bundle);
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_color_entry(0), make_color_entry(2) };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+    }
+
+    // A receiver with more slots than the file's filament count keeps its setup: neither the
+    // preset list nor the project-level vectors are shrunk to the file's smaller size.
+    {
+        PresetBundle bundle;
+        add_pla_preset(bundle);
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA" };
+        // Distinct project colours make a shrink observable.
+        bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values       = { "#111111", "#222222", "#333333" };
+        bundle.project_config.opt<ConfigOptionStrings>("filament_multi_colour")->values = { "#111111", "#222222", "#333333" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_color_entry(0) }; // highest published slot: 0
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // A one-filament file: num_filaments (1) is below the receiver's slot count (3).
+        config.opt<ConfigOptionFloats>("filament_diameter")->values          = { 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values          = { 1 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values           = { "#FF0000" };
+        config.opt<ConfigOptionStrings>("filament_type")->values             = { "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values           = { "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values              = { "GFL99" };
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        // No shrink: all three project entries survive, with slot 0 synced to the published
+        // colour at its unshifted index and slots 1-2 untouched.
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF", "#222222", "#333333" });
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_multi_colour")->values == std::vector<std::string>{ "#ABCDEF", "#222222", "#333333" });
+        CHECK(bundle.project_config.opt<ConfigOptionInts>("filament_map")->values.size() == 3);
+        // The published colour still reached slot 0's preset in place.
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    }
+}
+
+// A published slot is seeded from an unused library preset and the values are written onto it
+// in place, so the receiver's own material (slot 0) is never overwritten.
+TEST_CASE("Published 3MF grows published slots to the receiver's last preset and recolors it in place", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        return config;
+    };
+
+    // Receiver with its own material plus one more library preset; author publishes only slot 4
+    // (Red). Growth always repeats the receiver's last filament ("Add one filament"), so the
+    // grown slot references the shared "My PLA" preset and the published red recolors it in
+    // place; the unused "Other PLA" preset is left untouched.
+    PresetBundle bundle;
+    Preset &mine = add_inmemory_preset(bundle.filaments, "My PLA");
+    mine.config.opt_string("filament_type", 0u) = "PLA";
+    mine.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    Preset &other = add_inmemory_preset(bundle.filaments, "Other PLA");
+    other.config.opt_string("filament_type", 0u) = "PLA";
+    other.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#654321" };
+    bundle.filament_presets = { "My PLA" };
+
+    PublishedMaterialEntry entry;
+    entry.slot          = 3;
+    entry.publish_color = true;
+    entry.color         = "#ABCDEF";
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    REQUIRE(bundle.filament_presets.size() == 4);
+    // Every grown slot (published or filler) repeats the receiver's last preset.
+    CHECK(bundle.filament_presets[1] == "My PLA");
+    CHECK(bundle.filament_presets[2] == "My PLA");
+    // The published red recolors the shared "My PLA" preset in place; the unused "Other PLA"
+    // preset is left untouched.
+    CHECK(bundle.filament_presets[3] == "My PLA");
+    CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    CHECK(bundle.filaments.find_preset("Other PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#654321" });
+    // The project-level colours are sized and seeded for every grown slot.
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values.size() == 4);
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[1] == "#123456");
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[3] == "#ABCDEF");
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_multi_colour")->values.size() == 4);
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour_type")->values.size() == 4);
+    CHECK(bundle.project_config.opt<ConfigOptionInts>("filament_map")->values.size() == 4);
+}
+
+// Growth always repeats the receiver's last preset; a published slot only lands on its
+// material identity when the aliased grown slot is re-pointed (de-alias fires on a preset
+// key). Lock the identity priority there: an exact filament_id outranks an arbitrary unused
+// preset, and an entry carrying only a family constrains the pick to that family.
+TEST_CASE("Published 3MF re-points an aliased grown slot by published identity or family without a type requirement", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        return config;
+    };
+
+    PublishedMaterialEntry entry;
+    entry.slot            = 2;
+    entry.filament_type   = "PLA";
+    entry.filament_vendor = "Generic";
+    entry.keys            = { "filament_retraction_length" };
+    // An unused preset sorting before everything else: an unconstrained pick would take it.
+    PresetBundle bundle;
+    Preset &mine     = add_inmemory_preset(bundle.filaments, "My PLA");
+    mine.config.opt_string("filament_type", 0u) = "PLA";
+    Preset &arbitrary = add_inmemory_preset(bundle.filaments, "Aaa PLA");
+    arbitrary.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets = { "My PLA" };
+
+    SECTION("an exact filament_id outranks the first unused preset") {
+        Preset &authored = add_inmemory_preset(bundle.filaments, "Zzz PLA");
+        authored.config.opt_string("filament_type", 0u) = "PLA";
+        authored.filament_id = "GFA00";
+        entry.filament_id    = "GFA00";
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+        CHECK(bundle.filament_presets[2] == "Zzz PLA");
+        // The exact-id preset outranks the type-only "Aaa PLA"; the re-point is reported.
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PLA -> Zzz PLA");
+    }
+
+    SECTION("a family-only entry picks an unused preset of that family") {
+        Preset &petg = add_inmemory_preset(bundle.filaments, "Bbb PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        entry.filament_type = "PETG";
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        // The family pick lands on the only PETG preset (the PLA presets and the receiver's own
+        // material lose), and the re-point is reported.
+        CHECK(bundle.filament_presets[2] == "Bbb PETG");
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PLA -> Bbb PETG");
+    }
+}
+
+// The GUI displays the edited preset, a snapshot of the selected collection preset taken at
+// selection time. Since the overlay mutates the collection presets in place, the load must
+// re-select the first slot's filament so the applied values - and slot replacements - surface
+// in the GUI.
+TEST_CASE("Published 3MF refreshes the edited preset so the applied material values surface", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9 };
+        return config;
+    };
+    auto make_entry = [] {
+        PublishedMaterialEntry entry;
+        entry.slot                = 0;
+        entry.publish_type        = true;
+        entry.publish_type_value  = "PLA";
+        entry.publish_color       = true;
+        entry.color               = "#ABCDEF";
+        entry.keys                = { "filament_retraction_length" };
+        return entry;
+    };
+
+    SECTION("the edited preset carries the applied colour and keys") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        bundle.filament_presets = { "My PLA" };
+        // Mirror the GUI: the displayed preset is the collection's edited preset.
+        REQUIRE(bundle.filaments.select_preset_by_name("My PLA", false));
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_entry() };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        const Preset &edited = bundle.filaments.get_edited_preset();
+        // The slot references the edited preset, so the overlay lands on the edited layer:
+        // visible as a modification while the stored preset stays untouched.
+        CHECK(edited.name == "My PLA");
+        CHECK(edited.config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+        check_double_vector(edited.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#123456" });
+        check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+        // The overlay is a visible, revertible modification of the edited preset.
+        CHECK(bundle.filaments.current_is_dirty());
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    SECTION("a slot replacement is reflected in the edited preset") {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+        Preset &abs = add_inmemory_preset(bundle.filaments, "My ABS");
+        abs.config.opt_string("filament_type", 0u) = "ABS";
+        abs.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.3 };
+        bundle.filament_presets = { "My PLA" };
+        REQUIRE(bundle.filaments.select_preset_by_name("My PLA", false));
+
+        PublishedMaterialEntry entry = make_entry();
+        entry.publish_type_value     = "ABS"; // mismatch: replaced by the library's ABS
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets[0] == "My ABS");
+        // The edited preset now displays the replacement with the author's values on top.
+        const Preset &edited = bundle.filaments.get_edited_preset();
+        CHECK(edited.name == "My ABS");
+        CHECK(edited.config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+        check_double_vector(edited.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    }
+}
+
+// The overlay lands on the edited layer when the slot references the collection's edited
+// preset, so the user's unsaved in-memory edits on it survive a published load (only the
+// published keys are touched) and the change shows as a visible, revertible modification.
+TEST_CASE("Published 3MF preserves unsaved edits on the edited filament preset", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_z_hop", true)->values = { 0.1 };
+    bundle.filament_presets = { "My PLA" };
+    REQUIRE(bundle.filaments.select_preset_by_name("My PLA", false));
+
+    // The user has unsaved in-memory edits on the preset being shown.
+    bundle.filaments.get_edited_preset().config.opt<ConfigOptionFloatsNullable>("filament_z_hop")->values = { 0.7 };
+
+    PublishedMaterialEntry entry;
+    entry.slot                = 0;
+    entry.publish_type        = true;
+    entry.publish_type_value  = "PLA";
+    entry.publish_color       = true;
+    entry.color               = "#ABCDEF";
+    entry.keys                = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // Published values land on the edited layer...
+    const Preset &edited = bundle.filaments.get_edited_preset();
+    CHECK(edited.name == "My PLA");
+    CHECK(edited.config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    check_double_vector(edited.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    // ...the user's unsaved edit on a non-published key survives...
+    check_double_vector(edited.config.opt<ConfigOptionFloatsNullable>("filament_z_hop")->values, { 0.7 });
+    // ...and the stored preset is untouched.
+    Preset *stored = bundle.filaments.find_preset("My PLA", false, true);
+    REQUIRE(stored != nullptr);
+    CHECK(stored->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#123456" });
+    check_double_vector(stored->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.5 });
+    check_double_vector(stored->config.opt<ConfigOptionFloatsNullable>("filament_z_hop")->values, { 0.1 });
+    // The overlay is a visible, revertible modification of the edited preset.
+    CHECK(bundle.filaments.current_is_dirty());
+    CHECK(pub.skipped_keys.empty());
+    CHECK(pub.material_replacements.empty());
+}
+
+// The published overlay must validate '#' variant indices: an out-of-range index is reported as
+// skipped and must NOT resize/corrupt the receiver's vector, and a variant suffix on a scalar
+// key is rejected instead of silently no-op'd.
+TEST_CASE("Published 3MF rejects out-of-range vector variants and variant-suffixed scalar keys", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    // Vector key, size 2 (matches the receiver's resized vector); distinct values make the
+    // applied element observable.
+    config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values = { 140., 150. };
+    config.opt_float("layer_height") = 0.28;
+    Preset::normalize(config);
+
+    PresetBundle bundle;
+    bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values = { 10., 20. };
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.1;
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = { "wiping_volumes_extruders#5", "wiping_volumes_extruders#1", "wiping_volumes_extruders#abc", "layer_height#0" };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // In-range variant applied element-wise; the out-of-range one did not resize the vector.
+    check_double_vector(bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values, { 10., 150. });
+    CHECK(bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values.size() == 2);
+    // Out-of-range variant, malformed variant and variant-suffixed scalar are reported as
+    // skipped; the malformed one must not fall back to element 0.
+    CHECK(contains_key(pub.skipped_keys, "wiping_volumes_extruders#5"));
+    CHECK(contains_key(pub.skipped_keys, "wiping_volumes_extruders#abc"));
+    CHECK(contains_key(pub.skipped_keys, "layer_height#0"));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "wiping_volumes_extruders#1"));
+    // The scalar was never applied.
+    CHECK_THAT(bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.1, 0.000001));
+}
+
+// The print/printer overlay guards option types like the material pass does: a published key
+// whose file-side option kind differs from the receiver's is reported as skipped instead of
+// throwing ConfigurationError out of load_config_model, which would abort the whole project
+// load. (Nullable variants share the type() of their non-nullable base, so this covers
+// genuinely different option kinds - e.g. a string where a float vector is expected.)
+TEST_CASE("Published 3MF reports type-mismatched keys as skipped instead of aborting", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    // The file carries the vector key as a string option (equal size to the receiver's)...
+    config.set_key_value("wiping_volumes_extruders", new ConfigOptionStrings({ "140", "150" }));
+    config.opt_float("layer_height") = 0.28;
+
+    PresetBundle bundle;
+    // ...while the receiver's edited print preset holds the float variant of the same key:
+    // without the type guard, ConfigOptionVector::set() throws ConfigurationError out of
+    // load_config_model.
+    bundle.prints.get_edited_preset().config.set_key_value("wiping_volumes_extruders", new ConfigOptionFloats({ 10., 20. }));
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.1;
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = { "wiping_volumes_extruders", "layer_height" };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The load completes; the type-mismatched key is reported as skipped and the receiver's
+    // value is untouched; the matching scalar key still applies.
+    CHECK(contains_key(pub.skipped_keys, "wiping_volumes_extruders"));
+    check_double_vector(bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values, { 10., 20. });
+    CHECK_THAT(bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.28, 0.000001));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "layer_height"));
+}
+
+// A receiver filament preset missing its material identity (hand-edited file) must not crash
+// the type gate: the gate reads it as a type mismatch, and the slot falls back to the
+// "no replacement" path (keys skipped, colour still applied to the slot's preset).
+TEST_CASE("Published 3MF survives a receiver preset missing its material identity", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+    config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99" };
+    config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9 };
+    Preset::normalize(config);
+
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    // Malformed receiver preset: the identity options are missing entirely.
+    pla.config.erase("filament_type");
+    pla.config.erase("filament_vendor");
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    bundle.filament_presets = { "My PLA" };
+
+    PublishedMaterialEntry entry;
+    entry.filament_type        = "PLA";
+    entry.filament_vendor      = "Generic";
+    entry.filament_id          = "GFL99";
+    entry.slot                 = 0;
+    entry.publish_type         = true; // exercises the type gate against the missing identity
+    // Require ABS: the receiver library (PLA-typed default preset, typeless slot preset) has no
+    // ABS candidate, so the gate falls into the "no replacement" path (a PLA requirement would
+    // legitimately replace the slot with the visible PLA default).
+    entry.publish_type_value   = "ABS";
+    entry.publish_color        = true;
+    entry.color                = "#ABCDEF";
+    entry.keys                 = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The gate reads the missing identity as a type mismatch; no same-type replacement exists,
+    // so the keys are skipped while the colour applies to the slot's preset in place. No crash.
+    CHECK(contains_key(pub.skipped_keys, "material:GFL99 (filament_retraction_length)"));
+    CHECK(bundle.filament_presets[0] == "My PLA");
+    Preset *mine_preset = bundle.filaments.find_preset("My PLA", false, true);
+    REQUIRE(mine_preset != nullptr);
+    CHECK(mine_preset->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+}
+
+// Lock the exact contents and order of the printer allowlist (the union of the tab's
+// "Retraction" and "Z-Hop" optgroup lists, Tab.cpp).
+TEST_CASE("Printer publishable allowlist matches the printer tab's Retraction and Z-Hop optgroups", "[Preset][Bundle][Published]")
+{
+    auto keys_of = [](const std::vector<PublishablePrinterOption>& opts) {
+        std::vector<std::string> keys;
+        keys.reserve(opts.size());
+        for (const PublishablePrinterOption& opt : opts)
+            keys.emplace_back(opt.key);
+        return keys;
+    };
+
+    const std::vector<std::string> expected_retraction = {
+        "retraction_length", "retract_restart_extra", "retraction_speed", "deretraction_speed",
+        "retraction_minimum_travel", "retract_when_changing_layer", "wipe", "wipe_distance",
+        "retract_before_wipe", "retract_after_wipe"
+    };
+    const std::vector<std::string> expected_z_hop = {
+        "retract_lift_enforce", "z_hop_types", "z_hop", "travel_slope", "retract_lift_above",
+        "retract_lift_below"
+    };
+
+    CHECK(keys_of(publishable_printer_retraction_options()) == expected_retraction);
+    CHECK(keys_of(publishable_printer_z_hop_options()) == expected_z_hop);
+
+    std::set<std::string> expected_union(expected_retraction.begin(), expected_retraction.end());
+    expected_union.insert(expected_z_hop.begin(), expected_z_hop.end());
+    CHECK(publishable_printer_keys() == expected_union);
+}
+
+// Loading the same published file twice must not compound values on the receiver's presets:
+// each load re-applies the same absolute values, so the result is idempotent.
+TEST_CASE("Published 3MF reloading does not compound values on the receiver's presets", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.9 };
+        return config;
+    };
+    auto make_entry = [] {
+        PublishedMaterialEntry entry;
+        entry.slot          = 0;
+        entry.publish_color = true;
+        entry.color         = "#ABCDEF";
+        entry.keys          = { "filament_retraction_length" };
+        return entry;
+    };
+
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    pla.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    bundle.filament_presets = { "My PLA" };
+
+    auto load = [&] {
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_entry() };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+    };
+    load();
+    // First load: the receiver's preset carries the published values (mutated in place).
+    CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    load();
+    // Each load re-applies the same values onto the (already mutated) preset: no accumulation.
+    CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values == std::vector<std::string>{ "#ABCDEF" });
+    check_double_vector(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+}
+
+// A receiver with several slots aliasing the same preset (multi-extruder profile with one
+// filament) and an author publishing keys on several slots: each published slot is re-pointed
+// at its own distinct preset so values never leak between slots.
+TEST_CASE("Published 3MF gives each published slot its own preset on an aliased receiver", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6, 0.9, 1.2, 1.5 };
+        return config;
+    };
+    auto make_key_entry = [](int slot) {
+        PublishedMaterialEntry entry;
+        entry.slot = slot;
+        entry.keys = { "filament_retraction_length" };
+        return entry;
+    };
+
+    // A 4-extruder receiver with a single filament preset: the slots alias [A, A, A, A] before
+    // the published pass.
+    PresetBundle bundle;
+    Preset &mine = add_inmemory_preset(bundle.filaments, "My PLA");
+    mine.config.opt_string("filament_type", 0u) = "PLA";
+    mine.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    // Spare library presets for the re-pointing to fall back on.
+    for (const char *name : { "Extra PLA A", "Extra PLA B", "Extra PLA C" }) {
+        Preset &extra = add_inmemory_preset(bundle.filaments, name);
+        extra.config.opt_string("filament_type", 0u) = "PLA";
+        extra.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    }
+    bundle.filament_presets = { "My PLA", "My PLA", "My PLA", "My PLA" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_key_entry(0), make_key_entry(1), make_key_entry(2), make_key_entry(3) };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    REQUIRE(bundle.filament_presets.size() == 4);
+    // Every published slot references its own distinct preset: slot 0 keeps the receiver's
+    // material, slots 1-3 are re-pointed at the spare library presets.
+    CHECK(bundle.filament_presets[0] == "My PLA");
+    CHECK(bundle.filament_presets[1] != bundle.filament_presets[0]);
+    CHECK(bundle.filament_presets[2] != bundle.filament_presets[0]);
+    CHECK(bundle.filament_presets[2] != bundle.filament_presets[1]);
+    CHECK(bundle.filament_presets[3] != bundle.filament_presets[0]);
+    CHECK(bundle.filament_presets[3] != bundle.filament_presets[1]);
+    CHECK(bundle.filament_presets[3] != bundle.filament_presets[2]);
+    // Each slot's stored preset carries its own slot's retraction (mutated in place).
+    const std::vector<double> expected = { 0.6, 0.9, 1.2, 1.5 };
+    for (size_t slot = 0; slot < 4; ++slot) {
+        Preset *preset = bundle.filaments.find_preset(bundle.filament_presets[slot], false, true);
+        REQUIRE(preset != nullptr);
+        check_double_vector(preset->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { expected[slot] });
+    }
+    CHECK(pub.skipped_keys.empty());
+}
+
+// De-aliasing runs on the exported identity even without a checked Type row: the re-pointed
+// slot lands on the exact published material (by filament_id) rather than an arbitrary spare,
+// and the formerly silent re-point is surfaced through the replacements notification list.
+TEST_CASE("Published 3MF de-aliases an aliased slot by published identity without a type requirement", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard", "Direct Drive Standard" };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+    config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99" };
+    config.option<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6, 0.9 };
+
+    PresetBundle bundle;
+    Preset &mine = add_inmemory_preset(bundle.filaments, "My PLA");
+    mine.config.opt_string("filament_type", 0u) = "PLA";
+    mine.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    // A spare sorting before the exact match: an unconstrained pick would take it.
+    Preset &spare = add_inmemory_preset(bundle.filaments, "Aaa PLA");
+    spare.config.opt_string("filament_type", 0u) = "PLA";
+    spare.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    Preset &match = add_inmemory_preset(bundle.filaments, "Zzz PLA");
+    match.config.opt_string("filament_type", 0u) = "PLA";
+    match.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    match.filament_id = "GFA00";
+    bundle.filament_presets = { "My PLA", "My PLA" };
+
+    PublishedMaterialEntry entry;
+    entry.slot            = 1;
+    entry.filament_type   = "PLA";
+    entry.filament_vendor = "Generic";
+    entry.filament_id     = "GFA00";
+    entry.keys            = { "filament_retraction_length" };
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    REQUIRE(bundle.filament_presets.size() == 2);
+    CHECK(bundle.filament_presets[0] == "My PLA");
+    CHECK(bundle.filament_presets[1] == "Zzz PLA");
+    // The published key was written onto the re-pointed slot's own preset.
+    Preset *target = bundle.filaments.find_preset("Zzz PLA", false, true);
+    REQUIRE(target != nullptr);
+    check_double_vector(target->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values, { 0.9 });
+    REQUIRE(pub.material_replacements.size() == 1);
+    CHECK(pub.material_replacements[0] == "slot 1: My PLA -> Zzz PLA");
+    CHECK(pub.skipped_keys.empty());
+}
+
+// Printer retraction keys are published per-extruder ("#N"): a receiver with a different
+// extruder count still receives the in-range elements; out-of-range variants are reported as
+// skipped instead of corrupting the receiver's vector.
+TEST_CASE("Published 3MF applies per-extruder printer keys across extruder-count mismatches", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        // Author has 4 extruders.
+        config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.6, 0.9, 1.2, 1.5 };
+        Preset::normalize(config);
+        return config;
+    };
+
+    // Receiver with a single extruder: only "#0" is in range; "#1..#3" are skipped.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#0", "retraction_length#1", "retraction_length#2", "retraction_length#3" };
+        DynamicPrintConfig config = make_file_config();
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.6 });
+        CHECK(contains_key(pub.skipped_keys, "retraction_length#1"));
+        CHECK(contains_key(pub.skipped_keys, "retraction_length#2"));
+        CHECK(contains_key(pub.skipped_keys, "retraction_length#3"));
+        CHECK_FALSE(contains_key(pub.skipped_keys, "retraction_length#0"));
+    }
+
+    // Receiver with four extruders and a 1-extruder author: only "#0" is published; the
+    // receiver's other extruders keep their own values.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8, 0.8, 0.8, 0.8 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#0" };
+        DynamicPrintConfig config = make_file_config();
+        // The author's file carries a single-extruder value.
+        config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.7 };
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.7, 0.8, 0.8, 0.8 });
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// A published mixed filament serializes its definition (components, ratios, gradient) into the
+// receiver's project_config - the project-level parallel arrays, not a filament preset. The
+// mix's own blended colour is carried as publish_color so the receiver renders the swatch.
+TEST_CASE("Published 3MF applies a mixed filament definition onto the receiver's project config", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        // Three author slots: two physical PLA/PETG plus one virtual mixed slot (index 2)
+        // blending slots 1 and 2 at 60/40 with a gradient.
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+            "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+        };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#0000FF", "#800080" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFT99", "GFL99" };
+        // The mixed slot's definition. These keys are project-level arrays in the full config;
+        // on export they are masked so only the published slot's entry survives.
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values = { 0, 0, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values = { "", "", "1,2" };
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "", "", "0.6,0.4" };
+        config.opt<ConfigOptionBools>("filament_mixed_gradient")->values = { 0, 0, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values = { "", "", "0.9,0.1" };
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values = { "", "", "0,0.1|1,0.9" };
+        config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values = { 0, 0, 1 };
+        return config;
+    };
+
+    // A receiver that already carries the mix slot at index 2 as an actual mixed slot (e.g. a
+    // two-physical-plus-one-mix project with the same layout): the incoming definition is a
+    // like-for-like override of the virtual slot and applies in place without relocation.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+        petg.config.opt_string("filament_type", 0u) = "PETG";
+        bundle.filament_presets = { "My PLA", "My PETG", "My PLA" };
+
+        // Grow the receiver's project arrays to 3 slots first, as set_num_filaments would,
+        // then mark the third slot as the receiver's own mixed filament.
+        bundle.set_num_filaments(3);
+        bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[2]                = 1;
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2]      = "1,1";
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] = "0.5,0.5";
+
+        PublishedMaterialEntry mix;
+        mix.filament_type   = "PLA";
+        mix.filament_vendor = "Generic";
+        mix.filament_id     = "GFL99";
+        mix.slot            = 2;
+        mix.publish_color   = true;
+        mix.color           = "#800080";
+        mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                                "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                                "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                                "filament_mixed_gradient_per_part" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The definition landed in project_config's parallel arrays at the author slot.
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 3);
+        CHECK(is_mixed[2]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 3);
+        CHECK(components[2] == "1,2");
+        const auto &ratios = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values;
+        REQUIRE(ratios.size() == 3);
+        CHECK(ratios[2] == "0.6,0.4");
+        const auto &gradient = bundle.project_config.opt<ConfigOptionBools>("filament_mixed_gradient")->values;
+        CHECK(gradient[2]);
+        const auto &range = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values;
+        CHECK(range[2] == "0.9,0.1");
+        const auto &curve = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values;
+        CHECK(curve[2] == "0,0.1|1,0.9");
+        const auto &per_part = bundle.project_config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values;
+        CHECK(per_part[2]);
+        // The mix's blended colour crossed into project_config for the swatch.
+        const auto &colour = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+        REQUIRE(colour.size() == 3);
+        CHECK(colour[2] == "#800080");
+        // The other slots were not overwritten by the mask.
+        CHECK_FALSE(is_mixed[0]);
+        CHECK_FALSE(is_mixed[1]);
+        // Nothing skipped: every serialized mixed key was applied.
+        CHECK(pub.skipped_keys.empty());
+        // Like-for-like override: no slot was relocated.
+        CHECK(pub.material_replacements.empty());
+    }
+
+    // A receiver with fewer slots: the slot is grown and seeded before the definition applies.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA" };
+
+        PublishedMaterialEntry mix;
+        mix.slot = 2;
+        mix.keys = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 3);
+        CHECK(is_mixed[2]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 3);
+        CHECK(components[2] == "1,2");
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// A published mixed filament whose definition cannot be applied is reported as skipped instead
+// of aborting the load: the entry lists a mixed key that the file's payload does not carry.
+TEST_CASE("Published 3MF reports an unappliable mixed filament definition as skipped", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets = { "My PLA" };
+
+    // Two author slots (so slot 1 is in range) but the payload omits the mixed arrays: the
+    // entry lists them, the file config does not.
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75 };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic" };
+
+    PublishedMaterialEntry mix;
+    mix.slot = 1;
+    mix.keys = { "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { mix };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The receiver grows to two slots; the missing payload keys are reported as skipped rather
+    // than dropped silently (material_label is empty for this entry).
+    REQUIRE(bundle.filament_presets.size() == 2);
+    CHECK(contains_key(pub.skipped_keys, "material: (filament_mixed_components)"));
+    CHECK(contains_key(pub.skipped_keys, "material: (filament_mixed_sublayer_ratios)"));
+}
+
+// A published mixed filament must never convert one of the receiver's real, physical slots
+// into a virtual mix: definitions that collide with a physical slot are relocated past every
+// positional (real-filament) destination, while ones colliding with an existing mixed slot
+// override it in place.
+TEST_CASE("Published 3MF relocates a mixed filament instead of overwriting a physical slot", "[Preset][Bundle][Published]")
+{
+    // An author project with <num_author_slots> slots whose last slot is a mixed filament.
+    auto make_file_config = [](size_t num_author_slots, size_t num_tail_mixes = 1) {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        std::vector<double> diameters(num_author_slots, 1.75);
+        std::vector<int> self_index;
+        std::vector<std::string> variants;
+        std::vector<std::string> types;
+        for (size_t i = 0; i < num_author_slots; ++i) {
+            self_index.push_back(int(i + 1));
+            variants.emplace_back("Direct Drive Standard");
+            types.push_back(i % 2 == 0 ? "PLA" : "PETG");
+        }
+        config.opt<ConfigOptionFloats>("filament_diameter")->values          = diameters;
+        config.opt<ConfigOptionInts>("filament_self_index")->values          = self_index;
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = variants;
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00AA00", "#0000FF", "#FFFF00", "#800080" };
+        config.opt<ConfigOptionStrings>("filament_colour")->values.resize(num_author_slots, "#808080");
+        config.opt<ConfigOptionStrings>("filament_type")->values     = types;
+        config.opt<ConfigOptionStrings>("filament_vendor")->values.assign(num_author_slots, "Generic");
+        config.opt<ConfigOptionStrings>("filament_ids")->values.resize(num_author_slots);
+        // The last <num_tail_mixes> author slots are mixed ones (components differ per slot so
+        // the definitions are distinguishable after relocation).
+        const size_t first_mix_slot                                        = num_author_slots - num_tail_mixes;
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values.assign(num_author_slots, 0);
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values.assign(num_author_slots, "");
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values.assign(num_author_slots, "");
+        for (size_t i = first_mix_slot; i < num_author_slots; ++i) {
+            config.opt<ConfigOptionBools>("filament_is_mixed")->values[i]       = 1;
+            config.opt<ConfigOptionStrings>("filament_mixed_components")->values[i] =
+                i % 2 == 0 ? std::string("1,2") : std::string("1,3");
+            config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[i] =
+                i % 2 == 0 ? std::string("0.6,0.4") : std::string("0.3,0.7");
+        }
+        return config;
+    };
+
+    // The reported bug: an author publishes with physical filaments on slots 1-2 and a mixed
+    // filament on slot 5; the receiver runs five real filaments of his own. Slot 5 must stay
+    // untouched and the mix lands as a newly appended virtual slot 6.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA", "My PLA", "My PLA" };
+        bundle.set_num_filaments(5, "#123456");
+        const std::vector<std::string> receiver_colours =
+            bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+
+        PublishedMaterialEntry mix;
+        mix.filament_type   = "PLA";
+        mix.filament_vendor = "Generic";
+        mix.slot            = 4;
+        mix.publish_color   = true;
+        mix.color           = "#800080";
+        mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                                "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                                "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                                "filament_mixed_gradient_per_part" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config(5);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The receiver grew by exactly one extra virtual slot.
+        REQUIRE(bundle.filament_presets.size() == 6);
+        // All five physical slots kept their meaning: no mixed flag, untouched names/colours.
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 6);
+        CHECK_FALSE(is_mixed[0]);
+        CHECK_FALSE(is_mixed[1]);
+        CHECK_FALSE(is_mixed[2]);
+        CHECK_FALSE(is_mixed[3]);
+        CHECK_FALSE(is_mixed[4]);
+        CHECK(is_mixed[5]);
+        CHECK(std::equal(receiver_colours.begin(), receiver_colours.end(),
+                         bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values.begin()));
+        CHECK(bundle.filament_presets[0] == "My PLA");
+        CHECK(bundle.filament_presets[4] == "My PLA");
+        // The definition itself is readable at the new index.
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 6);
+        CHECK(components[5] == "1,2");
+        const auto &ratios = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values;
+        REQUIRE(ratios.size() == 6);
+        CHECK(ratios[5] == "0.6,0.4");
+        // The blended colour seeds the swatch of the new slot only.
+        const auto &colour = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+        REQUIRE(colour.size() == 6);
+        CHECK(colour[5] == "#800080");
+        // The relocation is surfaced to the user through the post-import notice (the de-alias
+        // pass may contribute further messages, so presence is asserted, not the count).
+        bool relocated_reported = false;
+        for (const std::string &message : pub.material_replacements)
+            if (message.find("slot 4 -> slot 5") != std::string::npos)
+                relocated_reported = true;
+        CHECK(relocated_reported);
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // A definition colliding with the receiver's own mixed filament is overridden in place:
+    // nothing grows, nothing is reported as moved.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA" };
+        bundle.set_num_filaments(3);
+        bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[2]                = 1;
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2]      = "1,1";
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] = "0.9,0.1";
+
+        PublishedMaterialEntry mix;
+        mix.slot            = 2;
+        mix.publish_color   = true;
+        mix.color           = "#800080";
+        mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                                "filament_mixed_sublayer_ratios" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config(3);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets.size() == 3);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 3);
+        CHECK_FALSE(is_mixed[0]);
+        CHECK_FALSE(is_mixed[1]);
+        CHECK(is_mixed[2]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 3);
+        CHECK(components[2] == "1,2");
+        const auto &ratios = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values;
+        REQUIRE(ratios.size() == 3);
+        CHECK(ratios[2] == "0.6,0.4");
+        CHECK(pub.skipped_keys.empty());
+        CHECK(pub.material_replacements.empty());
+    }
+
+    // Author publishes four physical filaments plus two mixed ones on slots 5 and 6; the
+    // receiver runs five real filaments. Both mixes relocate onto consecutive fresh slots,
+    // preserving their author order (slot 5 -> slot 6, slot 6 -> slot 7); no receiver slot is
+    // converted into a virtual mix.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA", "My PLA", "My PLA" };
+        bundle.set_num_filaments(5, "#123456");
+        const std::vector<std::string> receiver_colours =
+            bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+
+        auto make_mix_entry = [](int authored_slot, const char *color) {
+            PublishedMaterialEntry entry;
+            entry.slot          = authored_slot;
+            entry.publish_color = true;
+            entry.color         = color;
+            entry.keys          = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+            return entry;
+        };
+        PublishedMaterialEntry mix_a = make_mix_entry(4, "#800080");
+        PublishedMaterialEntry mix_b = make_mix_entry(5, "#FF69B4");
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix_a, mix_b };
+        DynamicPrintConfig config = make_file_config(6, 2);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // Two fresh virtual slots were appended.
+        REQUIRE(bundle.filament_presets.size() == 7);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 7);
+        for (size_t i = 0; i < 5; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        CHECK(is_mixed[5]);
+        CHECK(is_mixed[6]);
+        // The definitions follow their author order.
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 7);
+        CHECK(components[5] == "1,2");
+        CHECK(components[6] == "1,3");
+        const auto &ratios = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values;
+        REQUIRE(ratios.size() == 7);
+        CHECK(ratios[5] == "0.6,0.4");
+        CHECK(ratios[6] == "0.3,0.7");
+        // The five real slots kept their colours; each mix's blended colour seeded its new slot.
+        const auto &colour = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+        REQUIRE(colour.size() == 7);
+        CHECK(std::equal(receiver_colours.begin(), receiver_colours.end(), colour.begin()));
+        CHECK(colour[5] == "#800080");
+        CHECK(colour[6] == "#FF69B4");
+        // Both relocations are reported with the correct mapping.
+        bool a_reported = false, b_reported = false;
+        for (const std::string &message : pub.material_replacements) {
+            if (message.find("slot 4 -> slot 5") != std::string::npos)
+                a_reported = true;
+            if (message.find("slot 5 -> slot 6") != std::string::npos)
+                b_reported = true;
+        }
+        CHECK(a_reported);
+        CHECK(b_reported);
+        CHECK(pub.skipped_keys.empty());
+        // The relocation table is exposed for the model-reference remapping.
+        REQUIRE(pub.mixed_slot_relocations.size() == 2);
+        CHECK(pub.mixed_slot_relocations.at(4) == 5);
+        CHECK(pub.mixed_slot_relocations.at(5) == 6);
+    }
+}
+
+// A receiver that already owns a MIXED filament must keep the physical-first invariant after a
+// published-3MF import: when incoming physical filaments would land on (or ahead of) the
+// receiver's mixed slot, that mix is displaced to a fresh tail slot instead of being left
+// interleaved with them (the R,M,R bug).
+TEST_CASE("Published 3MF relocates the receiver's mixed filament past the incoming physical slots", "[Preset][Bundle][Published]")
+{
+    // Build the receiver's tool-changer with three slots, the third being the receiver's own
+    // mixed filament. A SEMM (single_extruder_multi_material) receiver sizes its slot list by
+    // hand, so a lower slot count than the printer's nozzle count is preserved on load - a
+    // non-SEMM tool-changer would top the preset list up to the nozzle count and shift the
+    // expected sizes (the rebalance logic under test is the same either way).
+    auto make_receiver = [](PresetBundle &bundle, const std::string &components, const std::string &ratios) {
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA" };
+        bundle.set_num_filaments(3, "#123456");
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionBool>("single_extruder_multi_material", true)->value = true;
+        bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[2]          = 1;
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2] = components;
+        bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] = ratios;
+        bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[2]        = "#800080";
+        bundle.project_config.opt<ConfigOptionStrings>("filament_multi_colour")->values[2] = "#800080";
+    };
+    auto make_real_entry = [](int slot, const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.filament_vendor = "Generic";
+        entry.publish_color   = true;
+        entry.color           = color;
+        return entry;
+    };
+    // A four-physical author project with no mixed slots (colour publish only), as in the
+    // reported Ferrari reference file.
+    auto make_config_4_real = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+            "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+        };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#000000", "#FFFFFF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values   = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values    = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        return config;
+    };
+
+    // [R, R, M] + four colour-only physical slots at authored 0..3 -> [R, R, R, R, M].
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, "1,2", "0.5,0.5");
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_real_entry(0, "#FF0000"), make_real_entry(1, "#000000"),
+                              make_real_entry(2, "#FFFFFF"), make_real_entry(3, "#FFFF00") };
+        DynamicPrintConfig config = make_config_4_real();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The receiver grows by one extra virtual slot; the mix lands at the tail.
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        for (size_t i = 0; i < 4; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        CHECK(is_mixed[4]);
+        // The definition travelled with its swatch colour; the vacated slot 2 became physical.
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 5);
+        CHECK(components[4] == "1,2");
+        CHECK(components[2].empty());
+        const auto &colour = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+        REQUIRE(colour.size() == 5);
+        CHECK(colour[4] == "#800080");
+        CHECK(colour[2] == "#FFFFFF");
+        CHECK(pub.mixed_slot_relocations.at(2) == 4);
+        bool relocated_reported = false;
+        for (const std::string &message : pub.material_replacements)
+            if (message.find("slot 2 -> slot 4") != std::string::npos &&
+                message.find("mixed filament") != std::string::npos)
+                relocated_reported = true;
+        CHECK(relocated_reported);
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // [R, R, M] plus a payload mix authored at slot 3: the receiver mix (displaced to slot 3) sits
+    // ahead of the appended payload mix (slot 4), preserving physical-first tail ordering.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, "1,2", "0.5,0.5");
+
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values         = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values         = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+            "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+        };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#000000", "#0000FF", "#800080" };
+        config.opt<ConfigOptionStrings>("filament_type")->values   = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values    = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        // Authored slot 3 is a payload mixed definition blending slots 1 and 3.
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values                     = { 0, 0, 0, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values           = { "", "", "", "1,3" };
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values      = { "", "", "", "0.6,0.4" };
+        config.opt<ConfigOptionBools>("filament_mixed_gradient")->values               = { 0, 0, 0, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values       = { "", "", "", "0.9,0.1" };
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values       = { "", "", "", "0,0.1|1,0.9" };
+        config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values      = { 0, 0, 0, 1 };
+
+        PublishedMaterialEntry mix;
+        mix.slot          = 3;
+        mix.filament_type = "PLA";
+        mix.publish_color = true;
+        mix.color         = "#800080";
+        mix.keys          = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios",
+                              "filament_mixed_gradient", "filament_mixed_gradient_range", "filament_mixed_gradient_curve",
+                              "filament_mixed_gradient_per_part" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_real_entry(0, "#FF0000"), make_real_entry(1, "#000000"),
+                              make_real_entry(2, "#0000FF"), mix };
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        CHECK_FALSE(is_mixed[0]);
+        CHECK_FALSE(is_mixed[1]);
+        CHECK_FALSE(is_mixed[2]);
+        CHECK(is_mixed[3]); // receiver's mix, displaced to slot 3 first
+        CHECK(is_mixed[4]); // payload's mix, appended after
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 5);
+        CHECK(components[3] == "1,2");
+        CHECK(components[4] == "1,3");
+        REQUIRE(pub.mixed_slot_relocations.size() == 2);
+        CHECK(pub.mixed_slot_relocations.at(2) == 3);
+        CHECK(pub.mixed_slot_relocations.at(3) == 4);
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// Multiple receiver mixed slots interleaved with multiple incoming physical slots all rebalance
+// onto consecutive tail slots in index order (no cascade/overlap).
+TEST_CASE("Published 3MF rebalances several receiver mixed slots past the physical region", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets = { "My PLA", "My PLA", "My PLA" };
+    bundle.set_num_filaments(3, "#123456");
+    bundle.printers.get_edited_preset().config.opt<ConfigOptionBool>("single_extruder_multi_material", true)->value = true;
+    // Receiver: slot 1 and slot 2 are mixed.
+    bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[1]             = 1;
+    bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[2]             = 1;
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[1]   = "1,2";
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2]   = "1,3";
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[1] = "0.5,0.5";
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] = "0.4,0.6";
+
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values         = { 1.75, 1.75, 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values         = { 1, 2, 3 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+        "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+    };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00AA00", "#0000FF" };
+    config.opt<ConfigOptionStrings>("filament_type")->values   = { "PLA", "PLA", "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic" };
+    config.opt<ConfigOptionStrings>("filament_ids")->values    = { "GFL99", "GFL99", "GFL99" };
+
+    auto make_real_entry = [](int slot, const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.filament_vendor = "Generic";
+        entry.publish_color   = true;
+        entry.color           = color;
+        return entry;
+    };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_real_entry(0, "#FF0000"), make_real_entry(1, "#00AA00"), make_real_entry(2, "#0000FF") };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    REQUIRE(bundle.filament_presets.size() == 5);
+    const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+    REQUIRE(is_mixed.size() == 5);
+    for (size_t i = 0; i < 3; ++i)
+        CHECK_FALSE(is_mixed[i]);
+    CHECK(is_mixed[3]);
+    CHECK(is_mixed[4]);
+    const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+    REQUIRE(components.size() == 5);
+    CHECK(components[3] == "1,2");
+    CHECK(components[4] == "1,3");
+    REQUIRE(pub.mixed_slot_relocations.size() == 2);
+    CHECK(pub.mixed_slot_relocations.at(1) == 3);
+    CHECK(pub.mixed_slot_relocations.at(2) == 4);
+    CHECK(pub.skipped_keys.empty());
+}
+
+// The receiver's printer gates how many PHYSICAL filament slots a published 3MF may add: a
+// non-SEMM tool-changer feeds filament N from nozzle N, so a published slot past the nozzle
+// count cannot become a physical filament. It becomes an empty mixed-filament placeholder
+// instead - a virtual tail slot the GUI flags (broken mix) and the user fills with components
+// from their own filaments. SEMM receivers keep the ungated behaviour.
+TEST_CASE("Published 3MF turns a surplus slot past the printer's filament capacity into an empty mixed placeholder", "[Preset][Bundle][Published]")
+{
+    // An author project with <num_author_slots> physical slots, no mixed ones.
+    auto make_file_config = [](size_t num_author_slots) {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        std::vector<double> diameters(num_author_slots, 1.75);
+        std::vector<int> self_index;
+        std::vector<std::string> variants;
+        for (size_t i = 0; i < num_author_slots; ++i) {
+            self_index.push_back(int(i + 1));
+            variants.emplace_back("Direct Drive Standard");
+        }
+        config.opt<ConfigOptionFloats>("filament_diameter")->values          = diameters;
+        config.opt<ConfigOptionInts>("filament_self_index")->values          = self_index;
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = variants;
+        config.opt<ConfigOptionStrings>("filament_colour")->values.resize(num_author_slots, "#808080");
+        config.opt<ConfigOptionStrings>("filament_type")->values.assign(num_author_slots, "PLA");
+        config.opt<ConfigOptionStrings>("filament_vendor")->values.assign(num_author_slots, "Generic");
+        config.opt<ConfigOptionStrings>("filament_ids")->values.resize(num_author_slots);
+        return config;
+    };
+    // A non-SEMM receiver with <nozzles> nozzles running <slots> copies of one preset.
+    auto make_receiver = [](PresetBundle &bundle, size_t nozzles, size_t slots) {
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets.assign(slots, "My PLA");
+        bundle.set_num_filaments(slots, "#123456");
+        auto &printer_config                                    = bundle.printers.get_edited_preset().config;
+        printer_config.opt<ConfigOptionBool>("single_extruder_multi_material", true)->value = false;
+        printer_config.opt<ConfigOptionFloats>("nozzle_diameter", true)->values.assign(nozzles, 0.4);
+    };
+    auto make_physical_entry = [](int slot, const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.filament_vendor = "Generic";
+        entry.publish_color   = true;
+        entry.color           = color;
+        return entry;
+    };
+
+    // The reported case: an author publishes with a filament on slot 5; the receiver is a
+    // 4-filament tool-changer. The receiver keeps its four physical slots and the surplus
+    // material lands as an empty mixed placeholder at the tail.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 4, 4);
+        const std::vector<std::string> receiver_colours =
+            bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(4, "#ABCDEF") };
+        DynamicPrintConfig config = make_file_config(5);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The receiver grew by exactly one virtual slot, not a fifth physical one.
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        for (size_t i = 0; i < 4; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        CHECK(is_mixed[4]);
+        // The placeholder carries no definition: the GUI's integrity check flags it and
+        // blocks slicing until the user assigns components.
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 5);
+        CHECK(components[4].empty());
+        // The four physical slots kept their meaning and colours.
+        CHECK(std::equal(receiver_colours.begin(), receiver_colours.end(),
+                         bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values.begin()));
+        CHECK(bundle.filament_presets[0] == "My PLA");
+        CHECK(bundle.filament_presets[3] == "My PLA");
+        // The published colour seeds the placeholder's swatch.
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[4] == "#ABCDEF");
+        // The conversion is surfaced through the post-import notice.
+        bool placeholder_reported = false;
+        for (const std::string &message : pub.material_replacements)
+            if (message.find("unassigned mixed filament") != std::string::npos)
+                placeholder_reported = true;
+        CHECK(placeholder_reported);
+        CHECK(pub.skipped_keys.empty());
+        CHECK(pub.mixed_slot_relocations.empty());
+    }
+
+    // Two surplus slots (5 and 6) become two consecutive empty placeholders.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 4, 4);
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(4, "#ABCDEF"), make_physical_entry(5, "#F0F0F0") };
+        DynamicPrintConfig config = make_file_config(6);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 6);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 6);
+        for (size_t i = 0; i < 4; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        CHECK(is_mixed[4]);
+        CHECK(is_mixed[5]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 6);
+        CHECK(components[4].empty());
+        CHECK(components[5].empty());
+        const auto &colour = bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+        REQUIRE(colour.size() == 6);
+        CHECK(colour[4] == "#ABCDEF");
+        CHECK(colour[5] == "#F0F0F0");
+        CHECK(pub.skipped_keys.empty());
+        CHECK(pub.mixed_slot_relocations.empty());
+    }
+
+    // A surplus slot past both the receiver's list and the capacity packs onto the next free
+    // tail slot (never max(authored, next_free), which would grow filler physical slots past
+    // the capacity), and the relocation is recorded for the model-reference remapping.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 2, 2);
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(3, "#ABCDEF") };
+        DynamicPrintConfig config = make_file_config(4);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 3);
+        CHECK_FALSE(is_mixed[0]);
+        CHECK_FALSE(is_mixed[1]);
+        CHECK(is_mixed[2]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 3);
+        CHECK(components[2].empty());
+        REQUIRE(pub.mixed_slot_relocations.size() == 1);
+        CHECK(pub.mixed_slot_relocations.at(3) == 2);
+        bool relocation_reported = false;
+        for (const std::string &message : pub.material_replacements)
+            if (message.find("slot 3 -> slot 2") != std::string::npos &&
+                message.find("unassigned mixed filament") != std::string::npos)
+                relocation_reported = true;
+        CHECK(relocation_reported);
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // A Full Publish entry past the capacity becomes a placeholder too: no standalone
+    // detached copy is created for a material that got no physical slot.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 4, 4);
+
+        PublishedMaterialEntry entry = make_physical_entry(4, "#ABCDEF");
+        entry.full                   = true;
+        entry.preset_name            = "Generic PLA @System";
+        entry.filament_id            = "GFL99";
+        entry.full_keys              = { "filament_retraction_length" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config(5);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        CHECK(is_mixed[4]);
+        // No detached copy under the stripped name or its uniquified forms.
+        CHECK(bundle.filaments.find_preset("Generic PLA", false, true) == nullptr);
+        CHECK(bundle.filaments.find_preset("Generic PLA (Published)", false, true) == nullptr);
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // A SEMM receiver (the default printer preset) sizes its slot list by hand: the published
+    // slot past the nozzle count still grows physically, as before the capacity gate.
+    {
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA", "My PLA", "My PLA", "My PLA" };
+        bundle.set_num_filaments(4, "#123456");
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(4, "#ABCDEF") };
+        DynamicPrintConfig config = make_file_config(5);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        for (size_t i = 0; i < 5; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[4] == "#ABCDEF");
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // A pre-existing oversized slot list is never shrunk: a published entry pointing at one
+    // of its slots is applied positionally even though the list exceeds the nozzle count.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 4, 5);
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(4, "#ABCDEF") };
+        DynamicPrintConfig config = make_file_config(5);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        for (size_t i = 0; i < 5; ++i)
+            CHECK_FALSE(is_mixed[i]);
+        // The published colour reached the addressed slot's (shared) preset in place.
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values ==
+              std::vector<std::string>{ "#ABCDEF" });
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[4] == "#ABCDEF");
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // On a single-physical-slot receiver an empty mix could never be edited (the sidebar's
+    // mixed section needs two physical filaments), so the surplus entry is dropped and
+    // reported instead of becoming an unfixable placeholder.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 1, 1);
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { make_physical_entry(1, "#ABCDEF") };
+        DynamicPrintConfig config = make_file_config(2);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        CHECK(bundle.filament_presets.size() == 1);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 1);
+        CHECK_FALSE(is_mixed[0]);
+        REQUIRE(pub.skipped_keys.size() == 1);
+        CHECK(pub.skipped_keys.front().find("printer supports only 1") != std::string::npos);
+    }
+
+    // A payload mixed definition is exempt from the capacity gate: mixes are virtual slots
+    // that consume no nozzle, so a published mix past the nozzle count still lands.
+    {
+        PresetBundle bundle;
+        make_receiver(bundle, 4, 4);
+
+        PublishedMaterialEntry mix;
+        mix.slot          = 4;
+        mix.publish_color = true;
+        mix.color         = "#800080";
+        mix.keys          = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config(5);
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values.assign(5, 0);
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values.assign(5, "");
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values.assign(5, "");
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values[4]                = 1;
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values[4]      = "1,2";
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[4] = "0.6,0.4";
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 5);
+        const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+        REQUIRE(is_mixed.size() == 5);
+        CHECK(is_mixed[4]);
+        const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+        REQUIRE(components.size() == 5);
+        CHECK(components[4] == "1,2");
+        const auto &ratios = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values;
+        REQUIRE(ratios.size() == 5);
+        CHECK(ratios[4] == "0.6,0.4");
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// A single-extruder receiver collapses the author's per-extruder printer slots onto its single
+// slot: the first serialized variant of a base key is applied, the remaining variants of that
+// base key are reported as skipped.
+TEST_CASE("Published 3MF collapses a multi-extruder publish onto a single-extruder receiver", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+        // Author has two extruders.
+        config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.6, 0.9 };
+        config.opt<ConfigOptionFloats>("retraction_speed")->values  = { 30.0, 40.0 };
+        Preset::normalize(config);
+        return config;
+    };
+
+    // Both extruders published: the first serialized variant (#0, left) lands on the receiver's
+    // single slot; the second variant (#1) is reported as skipped.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8 };
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_speed")->values  = { 25.0 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#0", "retraction_length#1", "retraction_speed#0", "retraction_speed#1" };
+        DynamicPrintConfig config = make_file_config();
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.6 });
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_speed")->values, { 30.0 });
+        CHECK(contains_key(pub.skipped_keys, "retraction_length#1"));
+        CHECK(contains_key(pub.skipped_keys, "retraction_speed#1"));
+        CHECK_FALSE(contains_key(pub.skipped_keys, "retraction_length#0"));
+        CHECK_FALSE(contains_key(pub.skipped_keys, "retraction_speed#0"));
+    }
+
+    // Only the second extruder published: the single-extruder receiver still applies it (the
+    // author's "right" is the only serialized slot) and reports nothing skipped.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#1" };
+        DynamicPrintConfig config = make_file_config();
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.9 });
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
+// A multi-extruder "similar setup" receiver overrides each published extruder slot element-wise
+// (no collapsing): each '#N' variant applies to the matching receiver slot, out-of-range ones are
+// reported as skipped.
+TEST_CASE("Published 3MF overrides each extruder slot on a similar multi-extruder receiver", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00" };
+        // Author has two extruders.
+        config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.6, 0.9 };
+        Preset::normalize(config);
+        return config;
+    };
+
+    // Receiver with two extruders: both published slots override element-wise.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8, 0.8 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#0", "retraction_length#1" };
+        DynamicPrintConfig config = make_file_config();
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.6, 0.9 });
+        CHECK(pub.skipped_keys.empty());
+    }
+
+    // Receiver with three extruders: slots 0 and 1 override, slot 2 keeps its own value.
+    {
+        PresetBundle bundle;
+        bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values = { 0.8, 0.8, 0.7 };
+        PublishedConfig pub;
+        pub.published      = true;
+        pub.published_keys = { "retraction_length#0", "retraction_length#1" };
+        DynamicPrintConfig config = make_file_config();
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        check_double_vector(bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("retraction_length")->values, { 0.6, 0.9, 0.7 });
+        CHECK(pub.skipped_keys.empty());
+    }
+}
+
 // The nozzle-count top-up in update_multi_material_filament_presets() grows filament_presets on
 // its own, so a physical count derived from that list reports a slot no per-filament array has
 // yet. That is what made the extruder-count handler conclude there was nothing to add and leave
@@ -1406,3 +4532,953 @@ TEST_CASE("Sizing down to the nozzle count plus mixes is what eats the mixed tai
         CHECK(bundle.project_config.option<ConfigOptionStrings>("filament_mixed_components")->values[5] == "1,2");
     }
 }
+
+// After a published-3MF import relocated mixed-filament definitions, the freshly loaded
+// model's slot references must follow: object/volume "extruder" configs and multi-material
+// color-painting states (which store the one-based slot number) are re-pointed to where each
+// definition landed; everything else keeps its state.
+TEST_CASE("remap_model_filament_slots repoints extruder configs and color painting", "[Preset][Bundle][Published]")
+{
+    auto make_model = [] {
+        Model model;
+        ModelObject *object_a = model.add_object();
+        object_a->name        = "relocated mix";
+        ModelVolume *vol_a    = object_a->add_volume(make_cube(10., 10., 10.));
+        vol_a->config.set_key_value("extruder", new ConfigOptionInt(5)); // author slot 5 (0-based 4)
+        // Author painted one facet with the mix (slot 5) and another with a physical (slot 2).
+        {
+            TriangleSelector selector(vol_a->mesh());
+            selector.set_facet(0, EnforcerBlockerType(5));
+            selector.set_facet(1, EnforcerBlockerType(2));
+            vol_a->mmu_segmentation_facets.set_data(selector.serialize());
+        }
+        // A second object that does not reference the relocated slot at all. Painted with a
+        // real, non-relocated state (NONE is never serialized: an unsplit triangle without a
+        // state is the unpainted default and is skipped by TriangleSelector::serialize()).
+        ModelObject *object_b = model.add_object();
+        object_b->name        = "untouched";
+        object_b->config.set_key_value("extruder", new ConfigOptionInt(1));
+        ModelVolume *vol_b = object_b->add_volume(make_cube(5., 5., 5.));
+        vol_b->config.set_key_value("extruder", new ConfigOptionInt(2));
+        {
+            TriangleSelector selector(vol_b->mesh());
+            selector.set_facet(0, EnforcerBlockerType(2));
+            vol_b->mmu_segmentation_facets.set_data(selector.serialize());
+        }
+        return model;
+    };
+
+    const std::map<int, int> relocations = {{4, 5}};
+
+    Model model = make_model();
+    Slic3r::remap_model_filament_slots(model, relocations);
+
+    const ModelVolume *vol_a = model.objects[0]->volumes.front();
+    CHECK(vol_a->config.extruder() == 6); // author slot 5 -> final slot 6
+    // Painted states follow: the mix facet moved 5 -> 6, the physical one is untouched.
+    REQUIRE(TriangleSelector::has_facets(vol_a->mmu_segmentation_facets.get_data(), EnforcerBlockerType(6)));
+    REQUIRE_FALSE(TriangleSelector::has_facets(vol_a->mmu_segmentation_facets.get_data(), EnforcerBlockerType(5)));
+    CHECK(TriangleSelector::has_facets(vol_a->mmu_segmentation_facets.get_data(), EnforcerBlockerType(2)));
+
+    const ModelVolume *vol_b = model.objects[1]->volumes.front();
+    CHECK(vol_b->config.extruder() == 2);
+    // The untouched volume's paint (a non-relocated state) survives as-is.
+    CHECK(TriangleSelector::has_facets(vol_b->mmu_segmentation_facets.get_data(), EnforcerBlockerType(2)));
+
+    // The mapping is applied simultaneously: each entry reads the original slot number, so
+    // relocating onto another relocated-from slot number must not chase chains. With the
+    // 0-based relocations {3->4, 4->6} the 1-based config map is {4->5, 5->7}: a volume on
+    // 1-based slot 4 lands on 5 and does NOT continue to 7.
+    Model chained = make_model();
+    chained.objects[0]->volumes.front()->config.set_key_value("extruder", new ConfigOptionInt(4));
+    Slic3r::remap_model_filament_slots(chained, std::map<int, int>{{3, 4}, {4, 6}});
+    CHECK(chained.objects[0]->volumes.front()->config.extruder() == 5);
+    // The chained model's paint follows its own single-step mapping: painted state 5 -> 7,
+    // and nothing lands back on 5.
+    CHECK(TriangleSelector::has_facets(chained.objects[0]->volumes.front()->mmu_segmentation_facets.get_data(),
+                                       EnforcerBlockerType(7)));
+    CHECK_FALSE(TriangleSelector::has_facets(chained.objects[0]->volumes.front()->mmu_segmentation_facets.get_data(),
+                                             EnforcerBlockerType(5)));
+}
+
+// The slot ceiling (EnforcerBlockerType::ExtruderMax) is what the color-painting encoding can
+// address, so a mixed filament that does not fit must be dropped and reported instead of being
+// forced onto one of the receiver's physical filaments.
+TEST_CASE("Published 3MF drops a mixed filament that does not fit the slot limit and reports it", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets = { "My PLA" };
+    // A receiver already at the format's slot ceiling.
+    bundle.set_num_filaments(unsigned(EnforcerBlockerType::ExtruderMax), "#123456");
+    const std::vector<std::string> receiver_colours =
+        bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+
+    PublishedMaterialEntry mix;
+    mix.filament_type   = "PLA";
+    mix.filament_vendor = "Generic";
+    mix.slot            = int(EnforcerBlockerType::ExtruderMax) + 6; // beyond the ceiling
+    mix.publish_color   = true;
+    mix.color           = "#800080";
+    mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                            "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                            "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                            "filament_mixed_gradient_per_part" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { mix };
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // Nothing grew and no slot became a virtual mix.
+    REQUIRE(bundle.filament_presets.size() == size_t(EnforcerBlockerType::ExtruderMax));
+    for (size_t i = 0; i < bundle.filament_presets.size(); ++i)
+        CHECK_FALSE(bundle.is_mixed_filament(i));
+    // The receiver's colours were not touched.
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values == receiver_colours);
+    // The mix was reported instead of being applied.
+    REQUIRE(contains_key(pub.skipped_keys, "material:PLA (mixed filament definition: filament slot limit reached)"));
+    CHECK(pub.material_replacements.empty());
+}
+
+// The publish dialog can only produce definitions whose components reference existing physical
+// slots, so a payload whose components point at slots that do not exist (or at another mixed
+// slot) or that carries fewer than two components is broken. The load reports it through the
+// same channel as every other rejected input instead of shipping a mix the GUI integrity check
+// would only flag later.
+TEST_CASE("Published 3MF rejects a mixed filament definition with impossible components", "[Preset][Bundle][Published]")
+{
+    // A two-physical-plus-one-mix author file; the definition under test sits on slot 2.
+    auto make_file_config = [](const std::string &components) {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+            "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+        };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#0000FF", "#800080" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values = { 0, 0, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values = { "", "", components };
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "", "", "0.6,0.4" };
+        return config;
+    };
+
+    PublishedMaterialEntry mix;
+    mix.filament_type   = "PLA";
+    mix.filament_vendor = "Generic";
+    mix.filament_id     = "GFL99";
+    mix.slot            = 2;
+    mix.publish_color   = true;
+    mix.color           = "#800080";
+    mix.keys            = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+
+    for (const char *components : { "1,4", "1,3", "1" }) {
+        // The claimed components: "1,4" names a slot past the final count, "1,3" names the mix
+        // slot itself (1-based), "1" is not enough components to blend.
+        INFO("components = " << components);
+        PresetBundle bundle;
+        Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+        pla.config.opt_string("filament_type", 0u) = "PLA";
+        pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+        bundle.filament_presets = { "My PLA" };
+
+        mix.keys = { "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios" };
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { mix };
+        DynamicPrintConfig config = make_file_config(components);
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        // The definition was rejected, not applied: the grown slot is finalized as an empty
+        // mixed placeholder instead of keeping the seeded preset and masquerading as a real
+        // filament.
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.is_mixed_filament(2));
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2].empty());
+        CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2].empty());
+        // Reported through the shared rejection channel.
+        if (std::string(components) == "1")
+            CHECK(contains_key(pub.skipped_keys, "material:GFL99 (mixed filament definition: needs at least two components)"));
+        else
+            CHECK(contains_key(pub.skipped_keys, "material:GFL99 (mixed filament definition: components reference missing slots)"));
+        // The slot change was surfaced like the other slot adaptations.
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0].find("slot 2: mixed filament definition could not be imported") != std::string::npos);
+        // The blended colour was not written into the (shared) slot preset either.
+        CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values ==
+              std::vector<std::string>{ "#123456" });
+    }
+}
+
+// The reported scenario: an author publishes two mixed filaments whose components are
+// full-published physical slots; the receiver is a smaller tool-changer, so some of those
+// component slots become empty mixed placeholders. A mix whose component turned into a
+// placeholder can never be valid (mixes cannot reference mixes): it is rejected, and its
+// grown slot must be finalized as an empty mixed placeholder too - not keep the seeded
+// preset and masquerade as a real filament carrying the mix identity.
+TEST_CASE("Published 3MF finalizes a mixed filament rejected over a placeholder component as an empty placeholder", "[Preset][Bundle][Published]")
+{
+    // An author project: six physical slots plus two tail mixes, the second referencing the
+    // sixth physical slot (H2C-style: slot 7 = 1+2, slot 8 = 2+6).
+    auto make_file_config = [] {
+        DynamicPrintConfig config                                              = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values            = std::vector<double>(8, 1.75);
+        config.opt<ConfigOptionInts>("filament_self_index")->values            = { 1, 2, 3, 4, 5, 6, 7, 8 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values   = std::vector<std::string>(8, "Direct Drive Standard");
+        config.opt<ConfigOptionStrings>("filament_colour")->values             = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00",
+                                                                                   "#FF00FF", "#00FFFF", "#800080", "#804000" };
+        config.opt<ConfigOptionStrings>("filament_type")->values.assign(8, "PLA");
+        config.opt<ConfigOptionStrings>("filament_vendor")->values.assign(8, "Generic");
+        config.opt<ConfigOptionBools>("filament_is_mixed")->values             = { 0, 0, 0, 0, 0, 0, 1, 1 };
+        config.opt<ConfigOptionStrings>("filament_mixed_components")->values   = { "", "", "", "", "", "", "1,2", "2,6" };
+        config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "", "", "", "", "", "", "0.6,0.4", "0.5,0.5" };
+        // The export always serializes all seven masked mixed arrays, not just the ones in
+        // use; the unused gradient arrays ride along as defaults.
+        config.opt<ConfigOptionBools>("filament_mixed_gradient")->values       = { 0, 0, 0, 0, 0, 0, 0, 0 };
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values.assign(8, "");
+        config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values.assign(8, "");
+        config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values = { 0, 0, 0, 0, 0, 0, 0, 0 };
+        return config;
+    };
+    // A non-SEMM receiver with four nozzles and four slots (tool-changer style).
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets.assign(4, "My PLA");
+    bundle.set_num_filaments(4, "#123456");
+    auto &printer_config = bundle.printers.get_edited_preset().config;
+    printer_config.opt<ConfigOptionBool>("single_extruder_multi_material", true)->value = false;
+    printer_config.opt<ConfigOptionFloats>("nozzle_diameter", true)->values.assign(4, 0.4);
+
+    auto make_full_entry = [](int slot) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.filament_vendor = "Generic";
+        entry.full            = true;
+        entry.full_keys       = { "filament_retraction_length" };
+        return entry;
+    };
+    auto make_mix_entry = [](int slot, const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.filament_vendor = "Generic";
+        entry.publish_color   = true;
+        entry.color           = color;
+        entry.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                                  "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                                  "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                                  "filament_mixed_gradient_per_part" };
+        return entry;
+    };
+
+    // The dialog's emit order: the full-published physical slots (1, 2, 5, 6) and both mixes.
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_full_entry(0), make_full_entry(1), make_full_entry(4), make_full_entry(5),
+                          make_mix_entry(6, "#800080"), make_mix_entry(7, "#804000") };
+    DynamicPrintConfig config = make_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The receiver grew to the author's slot count, all virtual territory at the tail.
+    REQUIRE(bundle.filament_presets.size() == 8);
+    const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+    REQUIRE(is_mixed.size() == 8);
+    // Slots 0-3 stayed physical; authored slots 5 and 6 (0-based 4 and 5) became capacity
+    // placeholders.
+    for (size_t i = 0; i < 4; ++i)
+        CHECK_FALSE(is_mixed[i]);
+    CHECK(is_mixed[4]);
+    CHECK(is_mixed[5]);
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[4].empty());
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[5].empty());
+    // The first mix applied onto its uncontended tail slot.
+    CHECK(is_mixed[6]);
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[6] == "1,2");
+    // The second mix was rejected - its second component (authored slot 6) turned into a
+    // placeholder - and its slot was finalized as an empty mixed placeholder instead of
+    // keeping the seeded preset as a phantom real filament.
+    CHECK(is_mixed[7]);
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[7].empty());
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[7].empty());
+    REQUIRE(pub.skipped_keys.size() == 1);
+    CHECK(pub.skipped_keys[0] == "material:PLA (mixed filament definition: components reference missing slots)");
+    // Two Full Publish detach lines (slots 0-1), two capacity placeholder lines (slots 4-5),
+    // and the rejected mix's finalization line (slot 7).
+    REQUIRE(pub.material_replacements.size() == 5);
+    CHECK(std::any_of(pub.material_replacements.begin(), pub.material_replacements.end(),
+                      [](const std::string &line) {
+                          return line.find("slot 7: mixed filament definition could not be imported") != std::string::npos;
+                      }));
+}
+
+// The receiver must not overflow its physical capacity when it grows slots to reach a published
+// mixed definition: an unpublished mixed slot that lands as a gap past the nozzle count becomes
+// an empty mixed placeholder, not a physical filament. An author with six physical slots (0-5)
+// and two tail mixes (slots 6 and 7) publishes only 0-5 and 7; the receiver has four nozzles.
+// Slots 4 and 5 become surplus placeholders, slot 7 keeps its authored mix position, and the
+// unpublished gap slot 6 is finalized as a virtual placeholder - never a fifth physical slot.
+TEST_CASE("Published 3MF turns an unpublished gap slot past the printer's capacity into an empty mixed placeholder", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets.assign(4, "My PLA");
+    bundle.set_num_filaments(4, "#123456");
+    auto &printer_config                                    = bundle.printers.get_edited_preset().config;
+    printer_config.opt<ConfigOptionBool>("single_extruder_multi_material", true)->value = false;
+    printer_config.opt<ConfigOptionFloats>("nozzle_diameter", true)->values.assign(4, 0.4);
+
+    // 8 authored slots: 0-5 physical, 6 unpublished mixed, 7 published mixed. The payload masks
+    // the unpublished slot's mixed flag (filter_published_config), so slot 6 reads as physical.
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = std::vector<double>(8, 1.75);
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4, 5, 6, 7, 8 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = std::vector<std::string>(8, "Direct Drive Standard");
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00",
+                                                                   "#FF00FF", "#00FFFF", "#800080", "#804000" };
+    config.opt<ConfigOptionStrings>("filament_type")->values.assign(8, "PLA");
+    config.opt<ConfigOptionStrings>("filament_vendor")->values.assign(8, "Generic");
+    config.opt<ConfigOptionBools>("filament_is_mixed")->values             = { 0, 0, 0, 0, 0, 0, 0, 1 };
+    config.opt<ConfigOptionStrings>("filament_mixed_components")->values   = { "", "", "", "", "", "", "", "1,2" };
+    config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "", "", "", "", "", "", "", "0.5,0.5" };
+    config.opt<ConfigOptionBools>("filament_mixed_gradient")->values       = std::vector<unsigned char>(8, 0);
+    config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values.assign(8, "");
+    config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values.assign(8, "");
+    config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values = std::vector<unsigned char>(8, 0);
+
+    auto make_full_entry = [](int slot) {
+        PublishedMaterialEntry entry;
+        entry.slot          = slot;
+        entry.filament_type = "PLA";
+        entry.full          = true;
+        entry.full_keys     = { "filament_retraction_length" };
+        return entry;
+    };
+    auto make_mix_entry = [](int slot, const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot            = slot;
+        entry.filament_type   = "PLA";
+        entry.publish_color   = true;
+        entry.color           = color;
+        entry.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                                  "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                                  "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                                  "filament_mixed_gradient_per_part" };
+        return entry;
+    };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_full_entry(0), make_full_entry(1), make_full_entry(2), make_full_entry(3),
+                          make_full_entry(4), make_full_entry(5), make_mix_entry(7, "#804000") };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    REQUIRE(bundle.filament_presets.size() == 8);
+    const auto &is_mixed = bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values;
+    REQUIRE(is_mixed.size() == 8);
+    // Slots 0-3 stay physical; 4 and 5 are surplus placeholders; 6 is the unpublished gap; 7 is
+    // the published mix. All four tail slots are virtual.
+    for (size_t i = 0; i < 4; ++i)
+        CHECK_FALSE(is_mixed[i]);
+    CHECK(is_mixed[4]);
+    CHECK(is_mixed[5]);
+    CHECK(is_mixed[6]);
+    CHECK(is_mixed[7]);
+    // Surplus physical slots (4,5) and the unpublished gap (6) carry no definition; the
+    // published mix on slot 7 keeps its own.
+    const auto &components = bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values;
+    REQUIRE(components.size() == 8);
+    CHECK(components[4].empty());
+    CHECK(components[5].empty());
+    CHECK(components[6].empty());
+    CHECK(components[7] == "1,2");
+    // Exactly four physical slots remain (never a fifth past the nozzle count).
+    size_t physical_count = 0;
+    for (bool mixed : is_mixed)
+        if (!mixed)
+            ++physical_count;
+    CHECK(physical_count == 4);
+    // The unpublished gap's conversion is surfaced through the post-import notice.
+    bool gap_reported = false;
+    for (const std::string &message : pub.material_replacements)
+        if (message.find("slot 6: unassigned mixed filament") != std::string::npos)
+            gap_reported = true;
+    CHECK(gap_reported);
+    CHECK(pub.skipped_keys.empty());
+}
+
+// The relocation shifts cells inside the file's per-slot mixed arrays; a payload too short to
+// actually carry the definition degrades to empty cells, which the definition validation then
+// reports - an empty mix must not ship as a virtual slot.
+TEST_CASE("Published 3MF reports a relocated mixed filament whose payload cells are missing", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    bundle.filament_presets = { "My PLA", "My PLA", "My PLA", "My PLA", "My PLA" };
+    bundle.set_num_filaments(5, "#123456");
+    const std::vector<std::string> receiver_colours =
+        bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values;
+
+    PublishedMaterialEntry mix;
+    mix.filament_type   = "PLA";
+    mix.filament_vendor = "Generic";
+    mix.filament_id     = "GFL99";
+    mix.slot            = 3; // authored slot 3; the receiver's five real slots occupy 0-4
+    mix.publish_color   = true;
+    mix.color           = "#800080";
+    mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                            "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                            "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                            "filament_mixed_gradient_per_part" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { mix };
+    // The file's mixed arrays only cover its single physical slot: the definition data for
+    // slot 3 does not exist in the payload.
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = { "Direct Drive Standard" };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic" };
+    config.opt<ConfigOptionBools>("filament_is_mixed")->values = { 0 };
+    config.opt<ConfigOptionStrings>("filament_mixed_components")->values = { "" };
+    config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "" };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The mix was relocated past the physical territory...
+    REQUIRE(pub.mixed_slot_relocations.size() == 1);
+    CHECK(pub.mixed_slot_relocations.at(3) == 5);
+    REQUIRE(pub.material_replacements.size() == 2);
+    CHECK(pub.material_replacements[0].find("slot 3 -> slot 5") != std::string::npos);
+    // ...and the receiver grew to hold the destination slot, but the definition itself was
+    // rejected: the relocated cells degraded to empty defaults, the slot was finalized as an
+    // empty mixed placeholder (not a real filament), and both facts were reported.
+    REQUIRE(bundle.filament_presets.size() == 6);
+    CHECK(bundle.is_mixed_filament(5));
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[5].empty());
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[5].empty());
+    CHECK(contains_key(pub.skipped_keys, "material:GFL99 (mixed filament definition: needs at least two components)"));
+    CHECK(pub.material_replacements[1].find("slot 5: mixed filament definition could not be imported") != std::string::npos);
+    // The five real slots kept their colours.
+    CHECK(std::equal(receiver_colours.begin(), receiver_colours.end(),
+                     bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values.begin()));
+}
+
+// A grown published slot always repeats the receiver's last preset; it can only move to the
+// published material's identity when a replacement is warranted (an aliased slot that would
+// otherwise leak keys, or a type mismatch). The tier priority candidate_score uses is locked
+// here: exact preset name > bare name > exact setting_id > exact filament_id > vendor+type,
+// with the lower tiers reported as a substitute.
+TEST_CASE("Published 3MF re-points an aliased grown slot's material by identity tiers", "[Preset][Bundle][Published]")
+{
+    auto make_file_config = [] {
+        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+        config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75, 1.75 };
+        config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3, 4 };
+        config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+            "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+        };
+        config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#00FF00", "#0000FF", "#FFFF00" };
+        config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PLA", "PLA", "PLA" };
+        config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic", "Generic" };
+        config.opt<ConfigOptionStrings>("filament_ids")->values = { "GFL99", "GFL99", "GFL99", "GFL99" };
+        return config;
+    };
+
+    PublishedMaterialEntry entry;
+    entry.slot          = 2;
+    entry.filament_type = "PLA";
+
+    SECTION("an exact preset name outranks the bare-name form")
+    {
+        PresetBundle bundle;
+        Preset &mine  = add_inmemory_preset(bundle.filaments, "My PLA");
+        mine.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &bare  = add_inmemory_preset(bundle.filaments, "Authored PLA");
+        bare.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &exact = add_inmemory_preset(bundle.filaments, "Authored PLA @Vendor");
+        exact.config.opt_string("filament_type", 0u) = "PLA";
+        bundle.filament_presets = { "My PLA" };
+
+        entry.preset_name = "Authored PLA @Vendor";
+        entry.keys        = { "filament_retraction_length" };
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+        // The aliased grown slot is re-pointed at the exact-name preset; the bare-name and the
+        // receiver's own preset lose.
+        CHECK(bundle.filament_presets[2] == "Authored PLA @Vendor");
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PLA -> Authored PLA @Vendor");
+    }
+
+    SECTION("a bare name outranks an exact setting_id")
+    {
+        PresetBundle bundle;
+        Preset &mine = add_inmemory_preset(bundle.filaments, "My PLA");
+        mine.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &bare = add_inmemory_preset(bundle.filaments, "Authored PLA");
+        bare.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &sid  = add_inmemory_preset(bundle.filaments, "Bbb PLA");
+        sid.config.opt_string("filament_type", 0u) = "PLA";
+        sid.setting_id = "SID123";
+        bundle.filament_presets = { "My PLA" };
+
+        entry.preset_name = "Authored PLA @Vendor"; // no library preset carries this name
+        entry.setting_id  = "SID123";
+        entry.keys        = { "filament_retraction_length" };
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+        CHECK(bundle.filament_presets[2] == "Authored PLA");
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PLA -> Authored PLA");
+    }
+
+    SECTION("an exact setting_id outranks an exact filament_id")
+    {
+        PresetBundle bundle;
+        Preset &mine = add_inmemory_preset(bundle.filaments, "My PLA");
+        mine.config.opt_string("filament_type", 0u) = "PLA";
+        Preset &sid  = add_inmemory_preset(bundle.filaments, "Bbb PLA");
+        sid.config.opt_string("filament_type", 0u) = "PLA";
+        sid.setting_id = "SID123";
+        Preset &fid  = add_inmemory_preset(bundle.filaments, "Ccc PLA");
+        fid.config.opt_string("filament_type", 0u) = "PLA";
+        fid.filament_id = "GFA00";
+        bundle.filament_presets = { "My PLA" };
+
+        entry.preset_name = "Authored PLA @Vendor"; // no library preset carries this name
+        entry.setting_id  = "SID123";
+        entry.filament_id = "GFA00";
+        entry.keys        = { "filament_retraction_length" };
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PLA");
+        CHECK(bundle.filament_presets[2] == "Bbb PLA");
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PLA -> Bbb PLA");
+    }
+
+    SECTION("a vendor+type match is reported as a substitute")
+    {
+        PresetBundle bundle;
+        Preset &mine  = add_inmemory_preset(bundle.filaments, "My PETG");
+        mine.config.opt_string("filament_type", 0u) = "PETG";
+        Preset &exact_vendor = add_inmemory_preset(bundle.filaments, "Aaa PLA");
+        exact_vendor.config.opt_string("filament_type", 0u) = "PLA";
+        exact_vendor.config.opt_string("filament_vendor", 0u) = "Generic";
+        Preset &other_vendor = add_inmemory_preset(bundle.filaments, "Zzz PLA");
+        other_vendor.config.opt_string("filament_type", 0u) = "PLA";
+        other_vendor.config.opt_string("filament_vendor", 0u) = "Other";
+        bundle.filament_presets = { "My PETG" };
+
+        entry.filament_vendor = "Generic"; // no name or id identity: the family tiers decide
+        entry.publish_type    = true;
+        entry.publish_type_value = "PLA"; // the grown slot seeds "My PETG" -> the gate reads a mismatch
+        PublishedConfig pub;
+        pub.published     = true;
+        pub.material_keys = { entry };
+        DynamicPrintConfig config = make_file_config();
+        Preset::normalize(config);
+        bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+        REQUIRE(bundle.filament_presets.size() == 3);
+        CHECK(bundle.filament_presets[1] == "My PETG");
+        // The same-vendor PLA outranks the type-only candidate...
+        CHECK(bundle.filament_presets[2] == "Aaa PLA");
+        // ...and since it is not an exact material match, the load says so.
+        REQUIRE(pub.material_replacements.size() == 1);
+        CHECK(pub.material_replacements[0] == "slot 2: My PETG -> Aaa PLA (substitute)");
+    }
+}
+
+// Structural keys (identity links like filament_ids / inherits / printer_settings_id) are
+// never applied onto the receiver and never reported: a hand-crafted file listing them must
+// not trigger the "could not be applied" warning, while unknown keys still do.
+TEST_CASE("Published 3MF silently ignores structural keys in published_keys", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    config.opt_float("layer_height") = 0.28;
+    Preset::normalize(config);
+
+    PresetBundle bundle;
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.1;
+    const std::vector<std::string> ids_before =
+        bundle.filaments.get_edited_preset().config.opt<ConfigOptionStrings>("filament_settings_id")->values;
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = { "filament_ids", "inherits", "printer_settings_id", "layer_height", "not_a_setting" };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The real setting applied...
+    CHECK_THAT(bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.28, 1e-6));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "layer_height"));
+    // ...the structural keys were neither applied nor reported...
+    CHECK_FALSE(contains_key(pub.skipped_keys, "filament_ids"));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "inherits"));
+    CHECK_FALSE(contains_key(pub.skipped_keys, "printer_settings_id"));
+    CHECK(bundle.filaments.get_edited_preset().config.opt<ConfigOptionStrings>("filament_settings_id")->values == ids_before);
+    // ...while an unknown key still reports.
+    CHECK(contains_key(pub.skipped_keys, "not_a_setting"));
+}
+
+// A whole-vector key requires the receiver's vector to have the same number of elements as the
+// author's: pasting a 3-extruder list into a 2-extruder machine would overwrite the wrong
+// elements, so the key is reported as skipped and the receiver keeps its own values.
+TEST_CASE("Published 3MF skips a whole-vector key whose size does not match the receiver", "[Preset][Bundle][Published]")
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000" };
+    config.opt_float("layer_height") = 0.28;
+    // Author's wiping matrix sized for three extruders.
+    config.set_key_value("wiping_volumes_extruders", new ConfigOptionFloats({ 10., 20., 30. }));
+    Preset::normalize(config);
+
+    PresetBundle bundle;
+    // Receiver sized for two extruders.
+    bundle.prints.get_edited_preset().config.set_key_value("wiping_volumes_extruders", new ConfigOptionFloats({ 40., 50. }));
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.1;
+
+    PublishedConfig pub;
+    pub.published      = true;
+    pub.published_keys = { "wiping_volumes_extruders", "layer_height" };
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    check_double_vector(bundle.prints.get_edited_preset().config.opt<ConfigOptionFloats>("wiping_volumes_extruders")->values,
+                        { 40., 50. });
+    CHECK(contains_key(pub.skipped_keys, "wiping_volumes_extruders"));
+    // The matching scalar key still applied.
+    CHECK_FALSE(contains_key(pub.skipped_keys, "layer_height"));
+    CHECK_THAT(bundle.prints.get_edited_preset().config.opt_float("layer_height"), Catch::Matchers::WithinAbs(0.28, 1e-6));
+}
+
+// The uniquify chain continues past the first suffix: with both "X" and "X (Published)" already
+// present, the next imported copy of "X" lands as "X (Published 2)" and leaves the others alone.
+TEST_CASE("Published 3MF uniquifies a second imported full material as (Published 2)", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    petg.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.6 };
+    Preset &bare = add_inmemory_preset(bundle.filaments, "Generic PLA");
+    bare.config.opt_string("filament_type", 0u) = "PLA";
+    bare.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    Preset &pub1 = add_inmemory_preset(bundle.filaments, "Generic PLA (Published)");
+    pub1.config.opt_string("filament_type", 0u) = "PLA";
+    pub1.config.opt<ConfigOptionFloatsNullable>("filament_retraction_length", true)->values = { 0.5 };
+    bundle.filament_presets = { "My PETG" };
+
+    PublishedMaterialEntry entry;
+    entry.slot               = 0;
+    entry.full               = true;
+    entry.publish_type       = true;
+    entry.publish_type_value = "PLA";
+    entry.preset_name        = "Generic PLA @Qidi Q2 0.4 nozzle";
+    entry.full_keys          = { "filament_retraction_length" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { entry };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    CHECK(bundle.filament_presets[0] == "Generic PLA (Published 2)");
+    check_double_vector(bundle.filaments.find_preset("Generic PLA (Published 2)", false, true)
+                            ->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values,
+                        { 0.9 });
+    check_double_vector(bundle.filaments.find_preset("Generic PLA", false, true)
+                            ->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values,
+                        { 0.5 });
+    check_double_vector(bundle.filaments.find_preset("Generic PLA (Published)", false, true)
+                            ->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values,
+                        { 0.5 });
+    REQUIRE(pub.material_replacements.size() == 1);
+    CHECK(pub.material_replacements[0] == "slot 0: My PETG -> Generic PLA (Published 2)");
+    CHECK(pub.skipped_keys.empty());
+}
+
+// A mixed filament's blended colour is a swatch for the project's colour strip only: it must
+// never be written into the slot's (possibly shared) preset config, or every slot referencing
+// that preset would turn into the blend colour.
+TEST_CASE("Published 3MF never writes a mixed filament's blended colour into the slot's preset", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#123456" };
+    Preset &petg = add_inmemory_preset(bundle.filaments, "My PETG");
+    petg.config.opt_string("filament_type", 0u) = "PETG";
+    bundle.filament_presets = { "My PLA", "My PLA", "My PLA" };
+    bundle.set_num_filaments(3);
+    bundle.project_config.opt<ConfigOptionBools>("filament_is_mixed")->values[2]                = 1;
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2]      = "1,1";
+    bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values[2] = "0.5,0.5";
+
+    PublishedMaterialEntry mix;
+    mix.filament_type   = "PLA";
+    mix.filament_vendor = "Generic";
+    mix.filament_id     = "GFL99";
+    mix.slot            = 2;
+    mix.publish_color   = true;
+    mix.color           = "#800080";
+    mix.keys            = { "filament_is_mixed",       "filament_mixed_components",
+                            "filament_mixed_sublayer_ratios", "filament_mixed_gradient",
+                            "filament_mixed_gradient_range",  "filament_mixed_gradient_curve",
+                            "filament_mixed_gradient_per_part" };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { mix };
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.opt<ConfigOptionFloats>("filament_diameter")->values = { 1.75, 1.75, 1.75 };
+    config.opt<ConfigOptionInts>("filament_self_index")->values = { 1, 2, 3 };
+    config.opt<ConfigOptionStrings>("filament_extruder_variant")->values = {
+        "Direct Drive Standard", "Direct Drive Standard", "Direct Drive Standard"
+    };
+    config.opt<ConfigOptionStrings>("filament_colour")->values = { "#FF0000", "#0000FF", "#800080" };
+    config.opt<ConfigOptionStrings>("filament_type")->values = { "PLA", "PETG", "PLA" };
+    config.opt<ConfigOptionStrings>("filament_vendor")->values = { "Generic", "Generic", "Generic" };
+    config.opt<ConfigOptionBools>("filament_is_mixed")->values = { 0, 0, 1 };
+    config.opt<ConfigOptionStrings>("filament_mixed_components")->values = { "", "", "1,2" };
+    config.opt<ConfigOptionStrings>("filament_mixed_sublayer_ratios")->values = { "", "", "0.6,0.4" };
+    config.opt<ConfigOptionBools>("filament_mixed_gradient")->values = { 0, 0, 1 };
+    config.opt<ConfigOptionStrings>("filament_mixed_gradient_range")->values = { "", "", "0.9,0.1" };
+    config.opt<ConfigOptionStrings>("filament_mixed_gradient_curve")->values = { "", "", "0,0.1|1,0.9" };
+    config.opt<ConfigOptionBools>("filament_mixed_gradient_per_part")->values = { 0, 0, 1 };
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The definition applied like-for-like onto the virtual slot...
+    CHECK(bundle.filament_presets.size() == 3);
+    CHECK(bundle.is_mixed_filament(2));
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_mixed_components")->values[2] == "1,2");
+    // ...the blend colour landed in the project strip only...
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[2] == "#800080");
+    // ...and the shared preset kept its own colour: slots 0 and 1 render unchanged.
+    CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values ==
+          std::vector<std::string>{ "#123456" });
+    CHECK(bundle.filament_presets[0] == "My PLA");
+    CHECK(bundle.filament_presets[1] == "My PLA");
+    CHECK(pub.skipped_keys.empty());
+    CHECK(pub.material_replacements.empty());
+}
+
+// Duplicate entries for the same authored slot only occur in hand-crafted files (the dialog
+// emits one entry per slot); the load's contract under that input is deterministic last-wins,
+// not corruption.
+TEST_CASE("Published 3MF applies duplicate entries for one slot last-wins", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    Preset &pla = add_inmemory_preset(bundle.filaments, "My PLA");
+    pla.config.opt_string("filament_type", 0u) = "PLA";
+    pla.config.opt<ConfigOptionStrings>("filament_colour", true)->values = { "#000000" };
+    bundle.filament_presets = { "My PLA" };
+
+    auto make_entry = [](const char *color) {
+        PublishedMaterialEntry entry;
+        entry.slot          = 0;
+        entry.publish_color = true;
+        entry.color         = color;
+        entry.keys          = { "filament_retraction_length" };
+        return entry;
+    };
+
+    PublishedConfig pub;
+    pub.published     = true;
+    pub.material_keys = { make_entry("#AA0000"), make_entry("#BB0000") };
+    DynamicPrintConfig config = published_pla_file_config();
+    Preset::normalize(config);
+    bundle.load_config_model("test.3mf", std::move(config), Semver(), &pub);
+
+    // The second entry won both the project strip and the slot's preset.
+    CHECK(bundle.project_config.opt<ConfigOptionStrings>("filament_colour")->values[0] == "#BB0000");
+    CHECK(bundle.filaments.find_preset("My PLA", false, true)->config.opt<ConfigOptionStrings>("filament_colour")->values ==
+          std::vector<std::string>{ "#BB0000" });
+    check_double_vector(bundle.filaments.find_preset("My PLA", false, true)
+                            ->config.opt<ConfigOptionFloatsNullable>("filament_retraction_length")->values,
+                        { 0.9 });
+    CHECK(pub.skipped_keys.empty());
+    CHECK(pub.material_replacements.empty());
+}
+
+// normalize_filament_type maps "PLA High Speed" onto the canonical family "PLA" (a space-
+// separated modifier is dropped) but leaves dash-separated composite types like "PA-CF" intact,
+// and passes through unknown types and the empty string unchanged.
+TEST_CASE("normalize_filament_type strips a space modifier but keeps dash types", "[Preset][Bundle][Published]")
+{
+    CHECK(normalize_filament_type("PLA High Speed") == "PLA");
+    CHECK(normalize_filament_type("PA-CF") == "PA-CF");
+    CHECK(normalize_filament_type("PETG-CF") == "PETG-CF");
+    CHECK(normalize_filament_type("PLA") == "PLA");
+    CHECK(normalize_filament_type("ABC") == "ABC");
+    CHECK(normalize_filament_type("") == "");
+}
+
+// collect_dirty_settings_keys feeds the Publish dialog's pre-check: it must be the set union of
+// the dirty options across the edited print, printer and filament presets.
+TEST_CASE("collect_dirty_settings_keys unions the dirty settings from all three presets", "[Preset][Bundle][Published]")
+{
+    PresetBundle bundle;
+    // The edited preset is initialised as a copy of the selected (default) preset, so a single
+    // edit makes exactly that option dirty. deep_diff reports scalar keys by name but per-element
+    // vector keys as "key#<index>", so a vector edit surfaces as "key#0".
+    bundle.prints.get_edited_preset().config.opt_float("layer_height") = 0.28;
+    bundle.filaments.get_edited_preset().config.opt<ConfigOptionStrings>("filament_type", true)->values = { "ABS" };
+    bundle.printers.get_edited_preset().config.opt<ConfigOptionFloats>("nozzle_diameter", true)->values = { 0.6 };
+
+    const std::vector<std::string> dirty = collect_dirty_settings_keys(bundle);
+    for (const char *key : { "layer_height", "filament_type#0", "nozzle_diameter#0" })
+        CHECK(contains_key(dirty, key));
+}
+
+// The publish denylist and the mixed-key list are single sources of truth for the import path:
+// lock their members so a silent edit to either cannot drift away from the contract the import
+// and export masks rely on.
+TEST_CASE("Published 3MF denylist and mixed-key sets match the import/export contract", "[Preset][Bundle][Published]")
+{
+    const std::set<std::string>& structural = publish_structural_keys();
+    // Structural / inheritance keys must never be applied onto a receiver's presets.
+    for (const char *key : { "printer_settings_id", "filament_settings_id", "print_settings_id",
+                             "compatible_printers", "compatible_prints", "compatible_printers_condition",
+                             "compatible_prints_condition", "default_filament_profile", "default_print_profile",
+                             "inherits", "extruder_count", "printer_model", "filament_ids" })
+        CHECK(structural.count(key) == 1);
+    // ...but a per-slot publishable material key is not structural.
+    CHECK(structural.count("filament_retraction_length") == 0);
+    CHECK(structural.count("filament_colour") == 0);
+
+    const std::set<std::string>& mixed = publish_mixed_keys();
+    CHECK(mixed == std::set<std::string>{
+        "filament_is_mixed", "filament_mixed_components", "filament_mixed_sublayer_ratios",
+        "filament_mixed_gradient", "filament_mixed_gradient_range", "filament_mixed_gradient_curve",
+        "filament_mixed_gradient_per_part" });
+    // Mixed keys are project-level arrays, not material-preset keys, so none is structural.
+    for (const std::string &key : mixed)
+        CHECK(structural.count(key) == 0);
+}
+
+namespace {
+
+// data_dir() is a process-wide global that import_presets extracts into; scope it to the test.
+struct ScopedDataDir
+{
+    std::string previous = data_dir();
+    explicit ScopedDataDir(const fs::path &dir) { set_data_dir(dir.string()); }
+    ~ScopedDataDir() { set_data_dir(previous); }
+};
+
+std::string read_file(const fs::path &file)
+{
+    std::ifstream in(file.string(), std::ios::binary);
+    return std::string(std::istreambuf_iterator<char>(in), std::istreambuf_iterator<char>());
+}
+
+void write_zip(const fs::path &zip_file, const std::vector<std::pair<std::string, std::string>> &entries)
+{
+    mz_zip_archive zip;
+    mz_zip_zero_struct(&zip);
+    REQUIRE(open_zip_writer(&zip, zip_file.string()));
+    for (const auto &[name, content] : entries)
+        REQUIRE(mz_zip_writer_add_mem(&zip, name.c_str(), content.data(), content.size(), MZ_DEFAULT_COMPRESSION));
+    REQUIRE(mz_zip_writer_finalize_archive(&zip));
+    REQUIRE(close_zip_writer(&zip));
+}
+
+bool any_filename_contains(const fs::path &root, const std::string &needle)
+{
+    for (fs::recursive_directory_iterator it(root), end; it != end; ++it)
+        if (it->path().filename().string().find(needle) != std::string::npos)
+            return true;
+    return false;
+}
+
+} // namespace
+
+TEST_CASE("Config import confines zip entries, preset names and bundle ids to the preset directory", "[Preset][Bundle][Regression]")
+{
+    ScopedTemporaryDir temp_dir;
+    const fs::path     data_root = temp_dir.path() / "datadir";
+    const fs::path     src_dir   = temp_dir.path() / "src";
+    fs::create_directories(src_dir);
+    ScopedDataDir scoped_data_dir(data_root);
+
+    PresetBundle bundle;
+    AppConfig    app_config;
+    const auto   confirm = [](std::string const &) { return 1; };
+    const auto   import  = [&](const fs::path &file) {
+        std::vector<std::string> files{file.string()};
+        bundle.import_presets(files, confirm, ForwardCompatibilitySubstitutionRule::Disable, app_config);
+        return files;
+    };
+
+    const fs::path good_file = src_dir / "Good.json";
+    write_print_preset(bundle.prints.default_preset().config, good_file, "Good");
+    const std::string good_json = read_file(good_file);
+
+    // Four levels up from where import_presets writes (<datadir>/user/default/temp) is temp_dir
+    // itself, so anything that escapes lands where the scan below can see it.
+    const std::string up     = "../../../../";
+    const std::string up_win = "..\\..\\..\\..\\";
+
+    SECTION("zip entry names with either separator are reduced to a basename") {
+        const fs::path zip = src_dir / "bundle.zip";
+        write_zip(zip, {{up + "zip-escape.json", "{}"}, {up_win + "zip-escape.json", "{}"}, {"presets/Good.json", good_json}});
+        import(zip);
+        CHECK(bundle.prints.find_preset("Good") != nullptr);
+        CHECK_FALSE(any_filename_contains(temp_dir.path(), "zip-escape"));
+    }
+
+    SECTION("a preset name that walks out of the preset directory is rejected") {
+        for (const std::string &name : {up + "name-escape", up_win + "name-escape"}) {
+            const fs::path file = src_dir / "escape.json";
+            write_print_preset(bundle.prints.default_preset().config, file, name);
+            CHECK(import(file).empty());
+            CHECK_FALSE(any_filename_contains(temp_dir.path(), "name-escape"));
+        }
+    }
+
+    SECTION("a bundle id that walks out of the bundle directory is rejected") {
+        const fs::path zip = src_dir / "bundle.zip";
+        write_zip(zip, {{BUNDLE_STRUCTURE_JSON_NAME, "{\"id\": \"" + up + "bundle-escape\"}"}, {"Good.json", good_json}});
+        CHECK(import(zip).empty());
+        CHECK_FALSE(any_filename_contains(temp_dir.path(), "bundle-escape"));
+    }
+}
diff --git a/tests/libslic3r/test_preset_diff.cpp b/tests/libslic3r/test_preset_diff.cpp
index 399fdabae1..22255c049e 100644
--- a/tests/libslic3r/test_preset_diff.cpp
+++ b/tests/libslic3r/test_preset_diff.cpp
@@ -33,3 +33,20 @@ TEST_CASE("deep_diff flags new vector entries that duplicate values[0]", "[Prese
     // specific to new indices rather than flagging the whole vector.
     REQUIRE(std::find(diff.begin(), diff.end(), "nozzle_diameter#0") == diff.end());
 }
+
+TEST_CASE("deep_diff distinguishes absolute and percentage speeds for each variant", "[PresetDiff][Config]")
+{
+    const size_t changed_index = GENERATE(size_t(0), size_t(1));
+    Preset reference(Preset::TYPE_PRINT, "ref");
+    reference.config.set_key_value("small_perimeter_speed", new ConfigOptionFloatsOrPercents{{50., false}, {50., false}});
+
+    Preset edited = reference;
+    edited.config.option<ConfigOptionFloatsOrPercents>("small_perimeter_speed")->values[changed_index].percent = true;
+
+    const auto diff = PresetCollection::dirty_options(&edited, &reference, /*deep_compare=*/true);
+    REQUIRE(diff == std::vector<std::string>{"small_perimeter_speed#" + std::to_string(changed_index)});
+
+    DynamicPrintConfig transferred = reference.config;
+    transferred.apply_only(edited.config, diff);
+    REQUIRE(*transferred.option("small_perimeter_speed") == *edited.config.option("small_perimeter_speed"));
+}
diff --git a/tests/libslic3r/test_preset_options.cpp b/tests/libslic3r/test_preset_options.cpp
new file mode 100644
index 0000000000..1763f5fbc7
--- /dev/null
+++ b/tests/libslic3r/test_preset_options.cpp
@@ -0,0 +1,70 @@
+// Regression test for the "option in def + UI but missing from preset key list"
+// crash class.
+//
+// The print preset's DynamicPrintConfig is seeded with only the keys returned by
+// Preset::print_options() (PresetBundle.cpp). A field added to PrintRegionConfig
+// or PrintObjectConfig and registered via print_config_def plus a TabPrint
+// optgroup, but left out of print_options(), still gets its control built; on tab
+// activation reload_config -> get_config_value dispatches to opt_bool/opt_int on a
+// DynamicPrintConfig with no entry for the key, and the accessor null-derefs the
+// result of option<T>(key).
+//
+// The invariant asserted here is the inverse: every key declared on
+// PrintRegionConfig and PrintObjectConfig appears in Preset::print_options() or
+// Preset::filament_options(), the two preset key lists that seed a print preset's
+// DynamicConfig.
+
+#include <catch2/catch_all.hpp>
+
+#include "libslic3r/Preset.hpp"
+#include "libslic3r/PrintConfig.hpp"
+
+#include <set>
+
+using namespace Slic3r;
+
+namespace {
+
+// Deprecated keys renamed in handle_legacy() (ironing_direction ->
+// ironing_angle, wall_infill_order -> wall_sequence); neither is in a
+// preset list. Register new options in a preset list, not here.
+const std::set<std::string> kDeprecatedRegionFields = {
+    "ironing_direction",
+    "wall_infill_order",
+};
+
+void check_keys_are_in_a_preset(const t_config_option_keys& keys, const std::string& class_name)
+{
+    REQUIRE_FALSE(keys.empty());
+    const auto& print_options    = Preset::print_options();
+    const auto& filament_options = Preset::filament_options();
+    const std::set<std::string> in_print(print_options.begin(), print_options.end());
+    const std::set<std::string> in_filament(filament_options.begin(), filament_options.end());
+    for (const std::string& key : keys) {
+        DYNAMIC_SECTION(class_name << "::" << key)
+        {
+            INFO("'" << key << "' on " << class_name
+                     << " is missing from "
+                        "Preset::print_options()/filament_options(); add it to "
+                        "s_Preset_print_options (or s_Preset_filament_options) in Preset.cpp.");
+            const bool registered = in_print.count(key) || in_filament.count(key) || kDeprecatedRegionFields.count(key);
+            REQUIRE(registered);
+        }
+    }
+}
+
+} // namespace
+
+// Bodies are laid out like the rest of the test suite rather than collapsed
+// onto the brace line.
+// clang-format off
+TEST_CASE("Every PrintRegionConfig field is registered in a preset key list", "[Preset][Config]")
+{
+    check_keys_are_in_a_preset(PrintRegionConfig::defaults().keys(), "PrintRegionConfig");
+}
+
+TEST_CASE("Every PrintObjectConfig field is registered in a preset key list", "[Preset][Config]")
+{
+    check_keys_are_in_a_preset(PrintObjectConfig::defaults().keys(), "PrintObjectConfig");
+}
+// clang-format on
diff --git a/tests/libslic3r/test_preset_setting_id.cpp b/tests/libslic3r/test_preset_setting_id.cpp
index 8347fa7089..5c06335381 100644
--- a/tests/libslic3r/test_preset_setting_id.cpp
+++ b/tests/libslic3r/test_preset_setting_id.cpp
@@ -5,10 +5,10 @@
 using namespace Slic3r;
 
 // Golden vectors from the Python reference generate_preset_setting_id (defined in
-// scripts/orca_id_tool.py). The C++ generate_preset_setting_id() MUST stay byte-identical
+// scripts/orca_profile_tool.py). The C++ generate_preset_setting_id() MUST stay byte-identical
 // to it, otherwise app-side on-the-fly ids would diverge from the
 // script-assigned ones in the profiles. Regenerate a vector with:
-//   python3 -c "import sys; sys.path.insert(0, 'scripts'); from orca_id_tool import generate_preset_setting_id as g; print(g('Afinia','filament','Afinia ABS @Afinia H400'))"
+//   python3 -c "import sys; sys.path.insert(0, 'scripts'); from orca_profile_tool import generate_preset_setting_id as g; print(g('Afinia','filament','Afinia ABS @Afinia H400'))"
 TEST_CASE("preset setting_id matches the Python reference", "[Preset][setting_id]") {
     struct Vec { const char* vendor; const char* type; const char* name; const char* expected; };
     const Vec vectors[] = {
diff --git a/tests/libslic3r/test_toolordering_nozzle_group.cpp b/tests/libslic3r/test_toolordering_nozzle_group.cpp
index 26e36c0dbf..d9a5d70406 100644
--- a/tests/libslic3r/test_toolordering_nozzle_group.cpp
+++ b/tests/libslic3r/test_toolordering_nozzle_group.cpp
@@ -163,6 +163,50 @@ TEST_CASE("H2C multi-nozzle: filaments get distinct nozzles on the 6-nozzle extr
     }
 }
 
+TEST_CASE("Grouping context spans the filament count with mis-sized config arrays", "[ToolOrdering][H2C]")
+{
+    // FilamentGroup indexes the grouping context's filament_info by filament id, so a short
+    // per-filament array must not shorten it: the reads run off the end.
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    // Single 6-nozzle extruder: opens the grouping engine without needing a BBL multi-extruder.
+    config.option<ConfigOptionFloats>("nozzle_diameter", true)->values = {0.4};
+    config.option<ConfigOptionIntsNullable>("extruder_max_nozzle_count", true)->values = {6};
+    config.option<ConfigOptionStrings>("extruder_nozzle_stats", true)->values = {"Standard#6"};
+
+    // Four filaments, with filament_type / filament_is_support left short on purpose.
+    config.option<ConfigOptionStrings>("filament_colour", true)->values = {"#FF0000", "#00FF00", "#0000FF", "#FFFF00"};
+    config.option<ConfigOptionStrings>("filament_type", true)->values = {"PLA"};
+    config.option<ConfigOptionBools>("filament_is_support", true)->values = {0};
+    config.option<ConfigOptionFloats>("filament_diameter", true)->values = {1.75, 1.75, 1.75, 1.75};
+    config.option<ConfigOptionInts>("filament_map", true)->values = {1, 1, 1, 1};
+    config.option<ConfigOptionFloats>("flush_volumes_matrix", true)->values = std::vector<double>(16, 140.);
+    config.option<ConfigOptionFloats>("flush_multiplier", true)->values = {1.};
+
+    Model model;
+    model.add_object("cube", "", make_cube(20, 20, 20))->add_instance();
+
+    Print print;
+    print.apply(model, config);
+    // apply() does not pad the per-filament arrays, so the mis-sizing survives into the engine.
+    REQUIRE(print.config().filament_type.values.size() < print.config().filament_colour.values.size());
+
+    std::vector<std::vector<unsigned int>> layer_filaments = {{0, 1}, {1, 2}, {2, 3}};
+
+    SECTION("short per-filament arrays still yield one entry per filament") {
+        auto result = ToolOrdering::get_recommended_filament_maps(layer_filaments, &print, FilamentMapMode::fmmAutoForFlush, {}, {});
+        REQUIRE(result.get_extruder_map(false).size() == 4);
+        for (int f = 0; f < 4; ++f)
+            REQUIRE(result.get_extruder_id(f) == 0);
+    }
+
+    SECTION("filament_ids longer than the filament count is truncated, not paired past the end") {
+        config.option<ConfigOptionStrings>("filament_ids", true)->values = {"a", "b", "c", "d", "e", "f"};
+        print.apply(model, config);
+        auto result = ToolOrdering::get_recommended_filament_maps(layer_filaments, &print, FilamentMapMode::fmmAutoForFlush, {}, {});
+        REQUIRE(result.get_extruder_map(false).size() == 4);
+    }
+}
+
 TEST_CASE("H2C dynamic selector: per-layer nozzle ids reach the g-code surface", "[ToolOrdering][H2C][Dynamic]")
 {
     // The per-layer regroup engine
@@ -981,3 +1025,41 @@ TEST_CASE("Selector slicing keeps the result valid across re-apply", "[Print][H2
     REQUIRE(status != PrintBase::APPLY_STATUS_INVALIDATED);
     REQUIRE(print.is_step_done(psSlicingFinished));
 }
+
+TEST_CASE("parse_cyclic_order parses user cyclic toolchange sequences", "[ToolOrdering][Cyclic]")
+{
+    // Filament numbers are 1-based in the UI; the parser returns 0-based indices.
+    SECTION("well-formed sequence") {
+        REQUIRE(parse_cyclic_order("3,2,1,4", 4) == std::vector<unsigned int>({2, 1, 0, 3}));
+    }
+
+    SECTION("surrounding whitespace is tolerated") {
+        REQUIRE(parse_cyclic_order(" 3 , 2 ,1, 4 ", 4) == std::vector<unsigned int>({2, 1, 0, 3}));
+    }
+
+    SECTION("out-of-range and non-positive entries are dropped") {
+        // 0 is below the 1-based range, 5 is above it for a 4-filament setup, -1 is invalid.
+        REQUIRE(parse_cyclic_order("0,5,-1,2", 4) == std::vector<unsigned int>({1}));
+    }
+
+    SECTION("duplicates keep only the first occurrence") {
+        REQUIRE(parse_cyclic_order("2,2,1,2", 4) == std::vector<unsigned int>({1, 0}));
+    }
+
+    SECTION("garbage tokens are ignored") {
+        REQUIRE(parse_cyclic_order("3,abc,,2,x1", 4) == std::vector<unsigned int>({2, 1}));
+    }
+
+    SECTION("tokens that only start with a number are ignored") {
+        // "2x" must be dropped rather than parsed as filament 2.
+        REQUIRE(parse_cyclic_order("3,2x,1", 4) == std::vector<unsigned int>({2, 0}));
+    }
+
+    SECTION("empty string yields an empty order") {
+        REQUIRE(parse_cyclic_order("", 4).empty());
+    }
+
+    SECTION("a partial sequence only names the filaments it lists") {
+        REQUIRE(parse_cyclic_order("3,1", 4) == std::vector<unsigned int>({2, 0}));
+    }
+}
diff --git a/tests/libslic3r/test_utils.cpp b/tests/libslic3r/test_utils.cpp
index c039069b2a..7880b783f1 100644
--- a/tests/libslic3r/test_utils.cpp
+++ b/tests/libslic3r/test_utils.cpp
@@ -2,6 +2,15 @@
 
 #include "libslic3r/Utils.hpp"
 
+#include "test_utils.hpp"
+
+#include <boost/filesystem.hpp>
+
+#include <algorithm>
+#include <cctype>
+#include <fstream>
+#include <string>
+
 #ifndef _WIN32
 #include <unistd.h>     // getuid
 #endif
@@ -52,3 +61,94 @@ TEST_CASE("per-user temp root is unchanged on Windows, isolated elsewhere", "[ut
     REQUIRE_THAT(root, Catch::Matchers::StartsWith(base + "/orcaslicer_"));
 #endif
 }
+
+TEST_CASE("copy_file reports the OS error when the destination cannot be written", "[utils]") {
+    ScopedTemporaryFile source(".txt");
+    {
+        std::ofstream ofs(source.string(), std::ios::binary);
+        ofs << "orca";
+    }
+    REQUIRE(boost::filesystem::exists(source.path()));
+
+    // A directory that was never created, so the copy fails on every platform.
+    const boost::filesystem::path destination = source.path().parent_path() / "orca-missing-dir" / "copy.txt";
+    REQUIRE_FALSE(boost::filesystem::exists(destination.parent_path()));
+
+    std::string error_message;
+    REQUIRE(copy_file(source.string(), destination.string(), error_message) == FAIL_COPY_FILE);
+    REQUIRE_FALSE(error_message.empty());
+
+#ifdef _WIN32
+    // The Windows branch formats GetLastError() itself. Writing that as
+    // "Error: " + errCode adds an integer to a string literal, which indexes into the
+    // literal instead of appending and runs off its end for any code above 7.
+    const std::string prefix = "Error: ";
+    REQUIRE(error_message.rfind(prefix, 0) == 0);
+
+    const std::string code = error_message.substr(prefix.size());
+    REQUIRE_FALSE(code.empty());
+    REQUIRE(std::all_of(code.begin(), code.end(), [](unsigned char c) { return std::isdigit(c) != 0; }));
+#endif // _WIN32
+}
+
+TEST_CASE("A resolved input path still names the same file after the working directory changes", "[utils]") {
+    ScopedTemporaryFile model(".3mf");
+    { std::ofstream out(model.string()); out << "3mf"; }
+    const std::string name = model.path().filename().string();
+
+    // Resolve the bare name from the directory holding the file, then move away from it. The guard
+    // restores the directory the test started in, wherever this leaves it.
+    ScopedWorkingDirectory cwd(model.path().parent_path());
+    const std::string resolved = resolve_cli_input_path(name);
+    boost::filesystem::current_path(boost::filesystem::path(TEST_DATA_DIR));
+
+    REQUIRE(boost::filesystem::exists(resolved));
+    REQUIRE(boost::filesystem::equivalent(resolved, model.path()));
+    // Control: the bare name finds nothing from here, so resolving it this late would have failed.
+    REQUIRE_FALSE(boost::filesystem::exists(name));
+}
+
+TEST_CASE("resolve_cli_input_path completes a relative path against the working directory", "[utils]") {
+    ScopedWorkingDirectory cwd(boost::filesystem::temp_directory_path());
+    // Read back rather than reusing temp_directory_path(): changing to it resolves any symlink.
+    const boost::filesystem::path here = boost::filesystem::current_path();
+
+    SECTION("a bare name") {
+        REQUIRE(resolve_cli_input_path("model.3mf") == (here / "model.3mf").make_preferred().string());
+    }
+    SECTION("a ./ prefix is dropped") {
+        REQUIRE(resolve_cli_input_path("./model.3mf") == (here / "model.3mf").make_preferred().string());
+    }
+    SECTION("a ../ traversal is collapsed") {
+        REQUIRE(resolve_cli_input_path("../model.3mf") == (here.parent_path() / "model.3mf").make_preferred().string());
+    }
+}
+
+TEST_CASE("resolve_cli_input_path leaves inputs that must not be completed unchanged", "[utils]") {
+    SECTION("an absolute path") {
+        const boost::filesystem::path absolute = (boost::filesystem::temp_directory_path() / "model.3mf").make_preferred();
+        REQUIRE(resolve_cli_input_path(absolute.string()) == absolute.string());
+    }
+#ifdef _WIN32
+    // Every absolute form Windows accepts opens today, so each must come back byte for byte:
+    // normalizing them would rewrite the forward slashes and rebuild the \\?\ and UNC prefixes.
+    SECTION("an absolute Windows path of any form") {
+        for (const std::string absolute : {R"(C:\models\model.3mf)",
+                                           R"(C:/models/model.3mf)",
+                                           R"(\\server\share\model.3mf)",
+                                           R"(\\?\C:\models\model.3mf)"})
+            REQUIRE(resolve_cli_input_path(absolute) == absolute);
+    }
+#endif
+    // These are downloaded rather than opened, and completing one would produce a path, not a URL.
+    SECTION("a custom open protocol URL") {
+        for (const std::string url : {"orcaslicer://open/?file=https://example.com/model.3mf",
+                                      "prusaslicer://open/?file=https://example.com/model.3mf",
+                                      "bambustudio://open/?file=https://example.com/model.3mf",
+                                      "cura://open/?file=https://example.com/model.3mf"})
+            REQUIRE(resolve_cli_input_path(url) == url);
+    }
+    SECTION("an empty argument") {
+        REQUIRE(resolve_cli_input_path("").empty());
+    }
+}
diff --git a/tests/libslic3r/test_wipe_path.cpp b/tests/libslic3r/test_wipe_path.cpp
new file mode 100644
index 0000000000..b637ad2b87
--- /dev/null
+++ b/tests/libslic3r/test_wipe_path.cpp
@@ -0,0 +1,1024 @@
+#include <catch2/catch_all.hpp>
+
+#include "libslic3r/GCode/WipePathHelpers.hpp"
+#include "libslic3r/AABBTreeLines.hpp"
+#include "libslic3r/Polyline.hpp"
+#include "libslic3r/Point.hpp"
+#include "libslic3r/Line.hpp"
+#include "libslic3r/libslic3r.h"
+
+#include <algorithm>
+#include <cmath>
+#include <limits>
+
+using namespace Slic3r;
+using Slic3r::AABBTreeLines::LinesDistancer;
+
+TEST_CASE("Stored wipe path retains its length around a curved wall after a seam gap", "[WipePath][Regression]")
+{
+    const int mirror = GENERATE(1, -1);
+    const double wipe_length = GENERATE(0.8, 1.0);
+    CAPTURE(mirror, wipe_length);
+    // A 0.02 mm seam gap on a curved 0.24 mm wall leaves a short outgoing
+    // segment whose inward offset backtracks. Coordinates use internal scaling
+    // from the affected loop; the adjacent inner wall is already printed.
+    const auto point = [mirror](coord_t x, coord_t y) { return Point(mirror * x, y); };
+    const Polyline original{
+        point(671861, 7772276), point(688586, 7765098), point(781082, 7687014),
+        point(852059, 7608861), point(889773, 7556912), point(958919, 7382963),
+        point(977048, 7259018), point(977325, 7173839), point(944250, 7039370),
+        point(911230, 6952087), point(880323, 6894944), point(760243, 6763860),
+        point(598587, 6641719), point(492626, 6593610), point(362533, 6543938),
+        point(170173, 6513482), point(114917, 6509380), point(18418, 6513666),
+        point(-145550, 6537251), point(-259087, 6580797), point(-413987, 6690495),
+        point(-485220, 6767022), point(-561189, 6893573), point(-576897, 6965717),
+        point(-595201, 7089303), point(-597977, 7164172), point(-590614, 7239553),
+        point(-574031, 7305533), point(-539668, 7383293), point(-442552, 7550465),
+        point(-332173, 7659644), point(-257819, 7717153), point(-209522, 7749563),
+        point(-121695, 7793438), point(399, 7844160), point(228137, 7880068),
+        point(363721, 7881585), point(431909, 7865985), point(569648, 7816149),
+        point(653482, 7780164),
+    };
+    const Polyline inner{
+        point(739251, 7241332), point(739377, 7202281), point(716708, 7110113),
+        point(694416, 7051190), point(685088, 7033943), point(599527, 6940541),
+        point(476243, 6847393), point(400952, 6813209), point(300851, 6774988),
+        point(142724, 6749952), point(111379, 6747625), point(40681, 6750765),
+        point(-85281, 6768883), point(-146010, 6792175), point(-256555, 6870462),
+        point(-295251, 6912034), point(-336173, 6978125), point(-357996, 7111200),
+        point(-359693, 7156985), point(-355612, 7198777), point(-348288, 7227916),
+        point(-327412, 7275156), point(-252784, 7403618), point(-175201, 7480358),
+        point(-89616, 7543582), point(-22802, 7576960), point(65459, 7613627),
+        point(248096, 7642423), point(338175, 7643431), point(364673, 7637369),
+        point(482204, 7594844), point(562221, 7560499), point(615604, 7515433),
+        point(679764, 7441323), point(727601, 7320981), point(739251, 7241332),
+    };
+    const Point seam_start = original.first_point();
+    const Point seam_end = original.last_point();
+    const double offset = scale_(0.239999);
+    Polyline forward = original;
+    REQUIRE_FALSE(offset_wipe_path(forward, seam_start, seam_end, seam_end,
+        -mirror, offset, scale_(wipe_length)));
+
+    Polyline path = original;
+    REQUIRE(offset_wipe_path_toward_support(path, seam_start, seam_end, seam_end,
+        -mirror, offset, scale_(wipe_length), inner.lines(), inner.lines(), original.lines(), offset));
+    REQUIRE(path.first_point() == seam_start);
+    REQUIRE(path.points.size() > 2);
+    // Wipe::wipe replaces the sentinel with the actual extrusion endpoint.
+    path.points.front() = seam_end;
+    CHECK_THAT(unscale_(path.length()), Catch::Matchers::WithinAbs(wipe_length, 0.0004));
+    CHECK(mirror * (path.points[1].x() - seam_end.x()) < 0);
+    CHECK(path.points[1].y() < seam_end.y());
+    Lines support = inner.lines();
+    const Lines current = original.lines();
+    support.insert(support.end(), current.begin(), current.end());
+    REQUIRE(wipe_path_support_score(path, seam_end, LinesDistancer<Line>(inner.lines()),
+        LinesDistancer<Line>(support), offset).has_value());
+}
+
+TEST_CASE("Stored wipe path retains its length after a loop pre-move at a curved seam", "[WipePath][Regression]")
+{
+    const int mirror = GENERATE(1, -1);
+    const bool pre_move = GENERATE(false, true);
+    CAPTURE(mirror, pre_move);
+    const auto point = [mirror](coord_t x, coord_t y) { return Point(mirror * x, y); };
+    // A 0.02 mm seam gap on a curved 0.24 mm wall, with the adjacent inner
+    // wall already printed. The loop pre-move advances the nozzle near the seam.
+    const Polyline original{
+        point(686772, 7813199), point(516334, 7887188), point(411017, 7915098),
+        point(346190, 7926015), point(246957, 7925330), point(-16945, 7881611),
+        point(-116443, 7842513), point(-255907, 7773886), point(-378126, 7681053),
+        point(-499258, 7552879), point(-574414, 7438250), point(-613558, 7370259),
+        point(-626313, 7341394), point(-650774, 7263424), point(-669964, 7169919),
+        point(-666798, 7058662), point(-631336, 6876547), point(-624410, 6852946),
+        point(-577832, 6762704), point(-517493, 6693143), point(-455794, 6631765),
+        point(-315549, 6531304), point(-169627, 6468424), point(-1908, 6443726),
+        point(143562, 6438395), point(314277, 6465470), point(380448, 6480795),
+        point(519922, 6526617), point(673990, 6611110), point(801581, 6705610),
+        point(927505, 6840928), point(969616, 6912718), point(1004269, 7009155),
+        point(1044144, 7171737), point(1046617, 7228598), point(1028598, 7358360),
+        point(950280, 7560914), point(867133, 7675444), point(732946, 7788889),
+        point(706168, 7804780), point(705118, 7805235),
+    };
+    const Polyline inner{
+        point(808905, 7211140), point(796801, 7298317), point(739603, 7446245),
+        point(691575, 7512401), point(595745, 7593416), point(438069, 7661865),
+        point(360694, 7682370), point(327119, 7688024), point(266586, 7687607),
+        point(53302, 7653657), point(-20276, 7624745), point(-130307, 7570601),
+        point(-218687, 7503470), point(-311907, 7404832), point(-371722, 7313599),
+        point(-401113, 7262547), point(-420207, 7203763), point(-431422, 7149118),
+        point(-429596, 7084952), point(-401187, 6939055), point(-379519, 6897073),
+        point(-343546, 6855603), point(-301665, 6813940), point(-197879, 6739595),
+        point(-104131, 6699197), point(19838, 6680942), point(129154, 6676936),
+        point(268758, 6699077), point(316366, 6710103), point(424812, 6745731),
+        point(545430, 6811879), point(642396, 6883697), point(735572, 6983824),
+        point(753259, 7013976), point(776223, 7077887), point(808905, 7211140),
+    };
+    const Point seam_start = original.first_point();
+    const Point seam_end = original.last_point();
+    const Point wipe_start = pre_move ? point(652751, 7792162) : seam_end;
+    const double offset = scale_(0.239999);
+    Polyline path = original;
+    REQUIRE(offset_wipe_path_toward_support(path, seam_start, seam_end, wipe_start,
+        mirror, offset, scale_(0.8), inner.lines(), inner.lines(), original.lines(), offset));
+    REQUIRE(path.first_point() == seam_start);
+    path.points.front() = wipe_start;
+    CHECK_THAT(unscale_(path.length()), Catch::Matchers::WithinAbs(0.8, 0.0004));
+    Lines support = inner.lines();
+    const Lines current = original.lines();
+    support.insert(support.end(), current.begin(), current.end());
+    REQUIRE(wipe_path_support_score(path, wipe_start, LinesDistancer<Line>(inner.lines()),
+        LinesDistancer<Line>(support), offset).has_value());
+}
+
+// Orca: helpers for constructing the extrusion geometry used by wipe tests.
+
+static ExtrusionPath make_path(const std::vector<Point> &pts, ExtrusionRole role = erExternalPerimeter,
+                               float width = 0.4f, float height = 0.2f)
+{
+    ExtrusionPath p(role, 0.5, width, height);
+    for (const Point &pt : pts)
+        p.polyline.append(Point3(pt.x(), pt.y(), coord_t(0)));
+    return p;
+}
+
+static ExtrusionPaths make_paths(const std::vector<Point> &pts, ExtrusionRole role = erExternalPerimeter,
+                                 float width = 0.4f)
+{
+    ExtrusionPaths paths;
+    paths.push_back(make_path(pts, role, width));
+    return paths;
+}
+
+TEST_CASE("Inward wipe support recognizes an inner wall starting on an overhang", "[WipePath][Regression]")
+{
+    const bool overhang_first = GENERATE(false, true);
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    ExtrusionPaths paths{
+        make_path({point(0.4, 0.4), point(0.4, 2.)}, erOverhangPerimeter),
+        make_path({point(0.4, 2.), point(0.4, 9.6), point(5.6, 9.6), point(5.6, 0.4), point(0.4, 0.4)}, erPerimeter)
+    };
+    if (!overhang_first)
+        std::rotate(paths.begin(), paths.begin() + 1, paths.end());
+    const ExtrusionLoop inner(paths);
+    REQUIRE(inner.role() == (overhang_first ? erOverhangPerimeter : erPerimeter));
+
+    WipeInwardSupport support;
+    support.append(inner);
+    REQUIRE(support.inner_lines.size() == inner.as_polyline().lines().size());
+    // The overhanging portion itself is already printed and can support the wipe.
+    const LinesDistancer<Line> inner_distancer(support.inner_lines);
+    CHECK_THAT(inner_distancer.distance_from_lines<false>(point(0.4, 1.)),
+               Catch::Matchers::WithinAbs(0., SCALED_EPSILON));
+    const Polyline original{point(0., 0.), point(0., 10.), point(6., 10.), point(6., 0.), point(0., 0.)};
+    Polyline wipe = original;
+    REQUIRE(offset_wipe_path_toward_support(wipe, original.first_point(), original.first_point(),
+        original.first_point(), -1, scale_(0.2), scale_(2.), support.inner_lines,
+        support.printed_lines, original.lines(), scale_(0.6)));
+    CHECK(wipe.points[1].x() > original.first_point().x());
+}
+
+TEST_CASE("Inward wipe support accumulates earlier walls without treating outer walls as targets", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    WipeInwardSupport support;
+    const ExtrusionPath inner = make_path({point(0.4, 0.), point(0.4, 5.)}, erPerimeter);
+    support.append(inner);
+    const ExtrusionLoop outer(ExtrusionPaths{
+        make_path({point(0., 0.), point(0., 5.)}, erOverhangPerimeter),
+        make_path({point(0., 5.), point(-5., 5.), point(-5., 0.), point(0., 0.)})
+    });
+    support.append(outer);
+    REQUIRE(support.inner_lines.size() == 1);
+    REQUIRE(support.printed_lines.size() == 5);
+    const LinesDistancer<Line> targets(support.inner_lines);
+    CHECK_THAT(targets.distance_from_lines<false>(point(0., 2.)),
+               Catch::Matchers::WithinAbs(scale_(0.4), SCALED_EPSILON));
+}
+
+static ExtrusionPaths make_loop_paths(const std::vector<Point> &contour_pts, float width = 0.4f)
+{
+    ExtrusionPaths paths;
+    size_t mid = contour_pts.size() / 2;
+    ExtrusionPath first(erExternalPerimeter, 0.5, width, 0.2f);
+    for (size_t i = 0; i <= mid; ++i)
+        first.polyline.append(Point3(contour_pts[i].x(), contour_pts[i].y(), coord_t(0)));
+    ExtrusionPath second(erExternalPerimeter, 0.5, width, 0.2f);
+    for (size_t i = mid; i < contour_pts.size(); ++i)
+        second.polyline.append(Point3(contour_pts[i].x(), contour_pts[i].y(), coord_t(0)));
+    second.polyline.append(Point3(contour_pts[0].x(), contour_pts[0].y(), coord_t(0)));
+    paths.push_back(std::move(first));
+    paths.push_back(std::move(second));
+    return paths;
+}
+
+// Orca: sample_path_at_distance coverage.
+
+TEST_CASE("sample_path_at_distance forward returns start for zero target", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s)});
+    REQUIRE(sample_path_at_distance(paths, true, 0.0) == Point(0, 0));
+}
+
+TEST_CASE("sample_path_at_distance forward samples along path", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s)});
+
+    Point result = sample_path_at_distance(paths, true, 50 * s);
+    REQUIRE_THAT(result.x(), Catch::Matchers::WithinAbs(50 * s, 2));
+    REQUIRE_THAT(result.y(), Catch::Matchers::WithinAbs(0, 2));
+}
+
+TEST_CASE("sample_path_at_distance forward crosses segment boundary", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s)});
+
+    Point result = sample_path_at_distance(paths, true, 150 * s);
+    REQUIRE_THAT(result.x(), Catch::Matchers::WithinAbs(100 * s, 2));
+    REQUIRE_THAT(result.y(), Catch::Matchers::WithinAbs(50 * s, 2));
+}
+
+TEST_CASE("sample_path_at_distance backward from end", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s)});
+
+    Point result = sample_path_at_distance(paths, false, 50 * s);
+    REQUIRE_THAT(result.x(), Catch::Matchers::WithinAbs(100 * s, 2));
+    REQUIRE_THAT(result.y(), Catch::Matchers::WithinAbs(50 * s, 2));
+}
+
+TEST_CASE("sample_path_at_distance on short path returns reachable point", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(0, 0), Point(10 * s, 0)});
+
+    Point result = sample_path_at_distance(paths, true, 1000 * s);
+    REQUIRE(result == Point(10 * s, 0));
+}
+
+TEST_CASE("sample_path_at_distance on zero-length path returns start", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(50 * s, 50 * s)});
+
+    REQUIRE(sample_path_at_distance(paths, true, 100 * s) == Point(50 * s, 50 * s));
+    REQUIRE(sample_path_at_distance(paths, false, 100 * s) == Point(50 * s, 50 * s));
+}
+
+TEST_CASE("Wipe offset direction follows the material side", "[WipePath]")
+{
+    REQUIRE(wipe_offset_direction(true,  false) == +1);
+    REQUIRE(wipe_offset_direction(false, false) == -1);
+    REQUIRE(wipe_offset_direction(true,  true) == -1);
+    REQUIRE(wipe_offset_direction(false, true) == +1);
+}
+
+TEST_CASE("Stored wipe path leaves source crossings to support validation", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(10 * s, 0), Point(100 * s, 0), Point(coord_t(13.4 * s), coord_t(50 * s))};
+
+    // Orca: crossing the just-printed wall is harmless for a non-extruding wipe.
+    // The caller decides whether the result is supported by printed geometry.
+    REQUIRE(offset_wipe_path(path, Point(10 * s, 0), Point(0, 0), Point(0, 0), +1, 5 * s, 1000 * s));
+}
+
+TEST_CASE("Stored wipe path builds the join after a nonzero seam gap", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(10 * s, 0), Point(10 * s, 0), Point(10 * s, 100 * s)};
+
+    REQUIRE(offset_wipe_path(path, Point(10 * s, 0), Point(0, 0), Point(0, 0), +1, 5 * s, 1000 * s));
+    REQUIRE(path.points.size() == 3);
+    REQUIRE(path.points[1] == Point(5 * s, 5 * s));
+    REQUIRE(path.points[2] == Point(5 * s, 100 * s));
+    REQUIRE(path.fitting_result.size() == 1);
+    REQUIRE(path.fitting_result.front().end_point_index == path.points.size() - 1);
+}
+
+TEST_CASE("Stored wipe path rejects an offset seam join that turns backward", "[WipePath][Regression]")
+{
+    const coord_t s = scale_(1.0);
+    const Point seam_start(s, s);
+    const Point seam_end(0, 0);
+    Polyline path{seam_start, Point(s, -10 * s), Point(s, -20 * s)};
+    const Polyline original = path;
+
+    REQUIRE_FALSE(offset_wipe_path(path, seam_start, seam_end, seam_end, +1, s, 5 * s));
+    REQUIRE(path.points == original.points);
+}
+
+TEST_CASE("Stored wipe path continues after an inward pre-move", "[WipePath][Regression]")
+{
+    const coord_t s = scale_(1.0);
+    const Point seam_start(s, s);
+    const Point seam_end(0, 0);
+    const Point wipe_start(2 * s, 2 * s);
+    Polyline path{seam_start, Point(s, -10 * s), Point(s, -20 * s)};
+
+    REQUIRE(offset_wipe_path(path, seam_start, seam_end, wipe_start, +1, s, 5 * s));
+    REQUIRE(path.points.size() >= 3);
+    path.points.front() = wipe_start; // Orca: reproduce Wipe::wipe()'s executable representation.
+    CHECK_THAT(path.length(), Catch::Matchers::WithinAbs(5. * s, 2.));
+}
+
+TEST_CASE("Stored wipe path does not retrace a translated seam gap", "[WipePath][Regression]")
+{
+    const coord_t s = scale_(1.0);
+    const Point seam_start(s, 0);
+    const Point seam_end(0, 0);
+    Polyline path{seam_start, seam_end, Point(-10 * s, 0)};
+    const Polyline original = path;
+    const Lines support{Line(Point(-10 * s, s), Point(10 * s, s))};
+
+    // Orca: the exact reversal at seam_start forces the translated fallback.
+    // The seam gap supplies its incoming direction but must not become an
+    // inward-outward-inward detour in the executable path.
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam_start, seam_end, seam_end, +1, s, 5 * s,
+        support, support, original.lines(), s));
+    REQUIRE(path.points.size() == 2);
+    CHECK(path.points[1].y() > seam_end.y());
+}
+
+TEST_CASE("Stored wipe path keeps its first offset point when seam gap is zero", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s),
+                  Point(0, 100 * s), Point(0, 0)};
+
+    REQUIRE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0), +1, 5 * s, 20 * s));
+    REQUIRE(path.points.size() >= 3);
+    REQUIRE(path.points[0] == Point(0, 0));
+    REQUIRE_THAT(path.points[1].x(), Catch::Matchers::WithinAbs(5 * s, 2));
+    REQUIRE_THAT(path.points[1].y(), Catch::Matchers::WithinAbs(5 * s, 2));
+}
+
+TEST_CASE("Stored wipe path ignores unsafe geometry beyond the used prefix", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(1000 * s, 0), Point(1000 * s, 20 * s),
+                  Point(900 * s, 20 * s), Point(0, 20 * s), Point(0, 0)};
+
+    REQUIRE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0), +1, 30 * s, 10 * s));
+    REQUIRE(path.points.size() == 2);
+    REQUIRE_THAT(path.length(), Catch::Matchers::WithinAbs(10 * s, 2));
+}
+
+TEST_CASE("Stored wipe path grows its source until the offset reaches the requested length", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s), Point(0, 100 * s)};
+    const double wipe_length = 250 * s;
+
+    // Orca: two inward corners shorten this offset by more than 2 * offset_dist.
+    REQUIRE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0),
+                             +1, 10 * s, wipe_length));
+    REQUIRE_THAT(path.length(), Catch::Matchers::WithinAbs(wipe_length, 2));
+}
+
+TEST_CASE("Stored wipe path is unchanged when wipe distance is zero", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(100 * s, 0)};
+    const Polyline orig = path;
+
+    REQUIRE_FALSE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0), +1, 5 * s, 0));
+    REQUIRE(path.points == orig.points);
+}
+
+TEST_CASE("Stored wipe path defers actual-start crossings to support validation", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(100 * s, 0), Point(100 * s, 100 * s),
+                  Point(0, 100 * s), Point(0, 0)};
+    const Lines current = path.lines();
+    const Lines remote{Line(Point(0, 50 * s), Point(100 * s, 50 * s))};
+    const Point wipe_start(50 * s, -10 * s);
+
+    REQUIRE(offset_wipe_path(path, Point(0, 0), Point(0, 0), wipe_start, +1, 5 * s, 100 * s));
+    Lines all_support = remote;
+    all_support.insert(all_support.end(), current.begin(), current.end());
+    REQUIRE_FALSE(wipe_path_support_score(path, wipe_start,
+        LinesDistancer<Line>(remote), LinesDistancer<Line>(all_support), 5 * s).has_value());
+}
+
+TEST_CASE("Stored wipe path keeps the closing join when its prefix ends at the closing vertex", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(0, 100 * s), Point(100 * s, 100 * s),
+                  Point(100 * s, 0), Point(0, 0)};
+
+    REQUIRE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0),
+                             +1, 5 * s, 300 * s));
+    REQUIRE(path.points.size() >= 2);
+    REQUIRE(path.points[1] == Point(-5 * s, -5 * s));
+}
+
+TEST_CASE("Stored wipe path rejects a two-point zero-gap loop", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    Polyline path{Point(0, 0), Point(100 * s, 0), Point(0, 0)};
+    const Polyline original = path;
+
+    REQUIRE_FALSE(offset_wipe_path(path, Point(0, 0), Point(0, 0), Point(0, 0),
+                                   +1, 5 * s, 100 * s));
+    REQUIRE(path.points == original.points);
+}
+
+TEST_CASE("Stored wipe path tolerates quantized contact at its actual start", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    const coord_t quantization = coord_t(SCALED_EPSILON / 2);
+    Polyline path{Point(0, quantization), Point(100 * s, quantization),
+                  Point(100 * s, 100 * s + quantization), Point(0, 100 * s + quantization),
+                  Point(0, quantization)};
+
+    // Orca: the executable transition starts within the geometry epsilon of the
+    // source endpoint. Treat this as the allowed start contact, while contacts
+    // farther along the transition remain unsafe.
+    REQUIRE(offset_wipe_path(path, Point(0, quantization), Point(0, quantization),
+                             Point(0, 0), +1, 5 * s, 20 * s));
+}
+
+TEST_CASE("Stored wipe path requires nearby generated perimeter geometry", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    const Polyline path{Point(0, 0), Point(0, 2 * s), Point(10 * s, 2 * s)};
+    const Lines adjacent{Line(Point(0, 4 * s), Point(10 * s, 4 * s))};
+    const Lines remote{Line(Point(0, 20 * s), Point(10 * s, 20 * s))};
+    const Lines current = path.lines();
+
+    const LinesDistancer<Line> adjacent_distancer(adjacent);
+    const LinesDistancer<Line> remote_distancer(remote);
+    Lines all_support = remote;
+    all_support.insert(all_support.end(), current.begin(), current.end());
+    const LinesDistancer<Line> all_support_distancer(all_support);
+
+    const auto score = wipe_path_support_score(path, Point(0, 2 * s), adjacent_distancer, adjacent_distancer, 3 * s);
+    REQUIRE(score.has_value());
+    CHECK_THAT(*score, Catch::Matchers::WithinAbs(2. * s, 2.));
+    REQUIRE_FALSE(wipe_path_support_score(path, Point(0, 2 * s), adjacent_distancer, adjacent_distancer, 0).has_value());
+    REQUIRE_FALSE(wipe_path_support_score(path, Point(0, 2 * s), remote_distancer, remote_distancer, 3 * s).has_value());
+    REQUIRE_FALSE(wipe_path_support_score(path, Point(0, 2 * s), remote_distancer, all_support_distancer, 3 * s).has_value());
+    REQUIRE_FALSE(wipe_path_support_score(path, Point(0, 2 * s), LinesDistancer<Line>(Lines{}),
+                                          all_support_distancer, 3 * s).has_value());
+}
+
+TEST_CASE("Stored wipe path checks the first segment from its actual start", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    const Polyline path{Point(0, 0), Point(10 * s, 0)};
+    const Lines support_near_ends{
+        Line(Point(0, -s), Point(0, s)),
+        Line(Point(10 * s, -s), Point(10 * s, s))
+    };
+
+    // Orca: both endpoints are supported, but the middle of the executable segment
+    // from wipe_start is not. The dummy path[0] must not hide that segment.
+    const LinesDistancer<Line> support_distancer(support_near_ends);
+    REQUIRE_FALSE(wipe_path_support_score(path, Point(0, 0), support_distancer, support_distancer, 2 * s).has_value());
+}
+
+TEST_CASE("Stored wipe path rejects unsupported gaps between nearby samples", "[WipePath][Regression]")
+{
+    const Point start = Point::new_scale(0., 0.);
+    const Point end = Point::new_scale(0.8, 0.);
+    const Polyline path{start, end};
+    const double support_y = GENERATE(0.8, 0.95);
+    const Lines support{
+        Line(Point::new_scale(0., support_y), Point::new_scale(0., 2.)),
+        Line(Point::new_scale(0.8, support_y), Point::new_scale(0.8, 2.))
+    };
+
+    // Both endpoints are within 1 mm of support and the move is shorter than
+    // the old sampling interval. Only the 0.8 mm case supports its midpoint.
+    const LinesDistancer<Line> support_distancer(support);
+    const bool supported = wipe_path_support_score(path, start, support_distancer, support_distancer, scale_(1.)).has_value();
+    CHECK(supported == (support_y < 0.9));
+}
+
+TEST_CASE("Stored wipe path checks support at the actual nozzle position", "[WipePath][Regression]")
+{
+    const Point end = Point::new_scale(0., 0.);
+    const Polyline path{end, end};
+    const Lines support{Line(Point::new_scale(-1., 0.), Point::new_scale(1., 0.))};
+
+    const LinesDistancer<Line> support_distancer(support);
+    REQUIRE_FALSE(wipe_path_support_score(path, Point::new_scale(0., -2.),
+        support_distancer, support_distancer, scale_(1.)).has_value());
+}
+
+TEST_CASE("Direct inward fallback respects a short wipe distance before validation", "[WipePath][Regression]")
+{
+    const Point seam = Point::new_scale(0., 0.);
+    Polyline path{seam, Point::new_scale(10., 0.), Point::new_scale(10., 10.),
+                  Point::new_scale(0., 10.), seam};
+    const Lines current = path.lines();
+    const Lines support{Line(Point::new_scale(0.4, 0.4), Point::new_scale(9.6, 0.4))};
+    const bool pre_move = GENERATE(false, true);
+    const Point wipe_start = pre_move ? Point::new_scale(0.02, 0.02) : seam;
+    const double wipe_length = scale_(0.05);
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam, seam, wipe_start, +1, scale_(0.2), wipe_length,
+        support, support, current, scale_(0.4)));
+    REQUIRE(path.points.size() == 2);
+    path.points.front() = wipe_start;
+    CHECK_THAT(path.length(), Catch::Matchers::WithinAbs(wipe_length, 2.));
+    CHECK(path.last_point().x() > wipe_start.x());
+    CHECK(path.last_point().y() > wipe_start.y());
+}
+
+TEST_CASE("Stored wipe path uses a stable zero-gap join for nearly parallel segments", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(58.777, 61.985);
+    Polyline path{
+        seam, point(58.822, 61.918), point(58.900, 61.789), point(58.980, 61.641),
+        point(59.054, 61.480), point(59.260, 60.980), point(58.412, 62.485),
+        point(58.631, 62.202), seam,
+    };
+
+    REQUIRE(offset_wipe_path(path, seam, seam, seam, -1, scale_(0.23), scale_(0.8)));
+    REQUIRE(path.points.size() >= 3);
+
+    const Vec2d first = (path.points[1] - seam).cast<double>();
+    const Vec2d second = (path.points[2] - path.points[1]).cast<double>();
+    CHECK(first.dot(second) >= 0.);
+}
+
+TEST_CASE("Stored wipe path follows the inner wall at a narrow external cusp", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(55.139, 60.077);
+    Polyline path{
+        seam, point(55.156, 60.010), point(55.205, 59.961), point(55.237, 59.934),
+        point(55.304, 59.907), point(55.392, 59.872), point(55.630, 59.791),
+        point(56.564, 59.430), point(55.061, 59.956), point(55.108, 60.008), seam,
+    };
+    const Polyline original = path;
+    const Lines target_support{
+        Line(point(54.983, 59.648), point(55.121, 59.745)),
+    };
+    Lines printed_support = target_support;
+    printed_support.emplace_back(point(54.75, 60.25), point(55.50, 60.10));
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam, seam, seam, -1, scale_(0.270341), scale_(0.8),
+        target_support, printed_support, original.lines(), scale_(0.4)));
+    REQUIRE(path.points.size() >= 2);
+    CHECK(path.points[1].y() < seam.y() - scale_(0.2));
+    CHECK(std::abs(path.points[1].x() - seam.x()) < scale_(0.1));
+}
+
+TEST_CASE("Stored wipe path keeps a supported zero-gap join that initially backtracks", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(56.737, 62.049);
+    Polyline path{
+        seam, point(56.759, 62.142), point(56.727, 62.294), point(56.682, 62.447),
+        point(56.631, 62.570), point(56.581, 62.669), point(56.512, 62.776),
+        point(54.0, 64.0), point(50.0, 60.0), point(54.0, 58.0),
+        point(56.773, 62.031), seam,
+    };
+    const Polyline original = path;
+    const Lines target_support{
+        Line(point(56.546, 62.012), point(56.534, 62.104)),
+        Line(point(56.534, 62.104), point(56.506, 62.238)),
+        Line(point(56.506, 62.238), point(56.467, 62.371)),
+        Line(point(56.467, 62.371), point(56.424, 62.474)),
+        Line(point(56.424, 62.474), point(56.382, 62.556)),
+    };
+
+    Polyline inward = path;
+    REQUIRE(offset_wipe_path(inward, seam, seam, seam, +1, scale_(0.23), scale_(0.8)));
+    REQUIRE(inward.points.size() >= 3);
+    const Vec2d connector = (inward.points[1] - seam).cast<double>();
+    const Vec2d outgoing = (inward.points[2] - inward.points[1]).cast<double>();
+    REQUIRE(connector.dot(outgoing) < 0.);
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam, seam, seam, +1, scale_(0.23), scale_(0.8),
+        target_support, target_support, original.lines(), scale_(0.4)));
+    CHECK(path.points[1].x() < seam.x() - scale_(0.1));
+}
+
+TEST_CASE("Stored wipe path leaves a narrow cusp directly after a seam gap", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam_start = point(55.139, 60.077);
+    const Point seam_end = point(55.141, 60.067);
+    Polyline path{
+        seam_start, point(55.107, 60.008), point(55.061, 59.956), point(55.027, 59.943),
+        point(54.982, 59.924), point(54.922, 59.879), point(54.868, 59.845),
+        point(54.754, 59.783), point(54.391, 59.635), point(54.053, 59.471),
+    };
+    const Polyline original = path;
+    const Lines target_support{
+        Line(point(55.132, 59.744), point(55.121, 59.745)),
+        Line(point(55.121, 59.745), point(54.983, 59.648)),
+        Line(point(54.983, 59.648), point(54.938, 59.623)),
+        Line(point(54.938, 59.623), point(54.866, 59.584)),
+        Line(point(54.866, 59.584), point(54.483, 59.427)),
+        Line(point(54.483, 59.427), point(54.157, 59.268)),
+    };
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam_start, seam_end, seam_end, -1, scale_(0.270341), scale_(0.8),
+        target_support, target_support, original.lines(), scale_(0.4)));
+    REQUIRE(path.points.size() >= 2);
+    CHECK(path.points[1].y() < seam_end.y() - scale_(0.2));
+    CHECK(std::abs(path.points[1].x() - seam_end.x()) < scale_(0.05));
+
+    // Orca: the inward connector must not run back through the first extruded
+    // point after the gap, which would put the wipe on the external wall.
+    const Line connector(seam_end, path.points[1]);
+    CHECK(connector.distance_to(original.points[1]) > scale_(0.02));
+}
+
+TEST_CASE("Stored wipe path does not reverse after an inward pre-move at a wide gap", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam_start = point(55.139, 60.077);
+    const Point seam_end = point(55.163, 60.002);
+    const Point wipe_start = point(55.142, 60.037);
+    Polyline path{
+        seam_start, point(55.107, 60.008), point(55.061, 59.956), point(55.027, 59.943),
+        point(54.982, 59.924), point(54.922, 59.879), point(54.868, 59.845),
+        point(54.754, 59.783), point(54.391, 59.635), point(54.053, 59.471),
+        point(50.2, 55.0), point(50.2, 50.0), point(60.8, 50.0), point(60.8, 55.0),
+        point(56.564, 59.430), point(55.824, 59.708), point(55.392, 59.872),
+        point(55.237, 59.934), point(55.205, 59.961), seam_end,
+    };
+    const Polyline original = path;
+    const Lines target_support{
+        Line(point(55.132, 59.744), point(55.121, 59.745)),
+        Line(point(55.121, 59.745), point(54.983, 59.648)),
+        Line(point(54.983, 59.648), point(54.866, 59.584)),
+        Line(point(54.866, 59.584), point(54.483, 59.427)),
+        Line(point(54.483, 59.427), point(54.157, 59.268)),
+    };
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam_start, seam_end, wipe_start, -1, scale_(0.270341), scale_(0.8),
+        target_support, target_support, original.lines(), scale_(0.4)));
+    REQUIRE(path.points.size() >= 3);
+
+    const Vec2d connector = (path.points[1] - wipe_start).cast<double>();
+    const Vec2d outgoing = (path.points[2] - path.points[1]).cast<double>();
+    CHECK(connector.dot(outgoing) >= 0.);
+    path.points.front() = wipe_start;
+    CHECK_THAT(path.length(), Catch::Matchers::WithinAbs(scale_(0.8), 2.));
+}
+
+TEST_CASE("Stored wipe path follows the incoming wall when a corner gap truncates the forward path",
+          "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam_start = point(46.047, 61.988);
+    const Point seam_end = point(46.118, 61.917);
+    Polyline path{
+        seam_start, point(39.139, 55.080), point(46.047, 48.171),
+        point(52.956, 55.080), seam_end,
+    };
+    const Polyline original = path;
+    const Lines target_support{
+        Line(point(46.047, 61.672), point(39.461, 55.080)),
+        Line(point(39.461, 55.080), point(46.047, 48.493)),
+        Line(point(46.047, 48.493), point(52.633, 55.080)),
+        Line(point(52.633, 55.080), point(46.047, 61.672)),
+    };
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam_start, seam_end, seam_end, +1, scale_(0.23), scale_(0.8),
+        target_support, target_support, original.lines(), scale_(0.4)));
+    path.points.front() = seam_end;
+    CHECK_THAT(path.length(), Catch::Matchers::WithinAbs(scale_(0.8), 2.));
+    REQUIRE(path.points.size() >= 3);
+    CHECK(path.points[1].x() < seam_end.x());
+    CHECK(path.points[1].y() < seam_end.y());
+}
+
+TEST_CASE("Stored wipe path prefers support on the material side of a seam gap", "[WipePath][Regression]")
+{
+    const coord_t s = scale_(1.0);
+    const Point seam_start(s, 0);
+    const Point seam_end(0, 0);
+    Polyline path{seam_start, Point(s, 10 * s), Point(s, 20 * s)};
+    const Polyline original = path;
+    const Lines target_support{
+        Line(Point(0, s), Point(0, 3 * s)),
+        Line(Point(s / 2, -s / 10), Point(3 * s / 2, -s / 10)),
+    };
+
+    // Orca: the lower line is closest at the cusp and the preferred winding
+    // points toward it, but the outgoing wall is adjacent to the upper line.
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam_start, seam_end, seam_end, -1, s, 5 * s,
+        target_support, target_support, original.lines(), 2 * s));
+    CHECK(path.points[1].y() > seam_end.y());
+}
+
+TEST_CASE("Stored wipe path rejects an outward offset at a reflex seam gap", "[WipePath][Regression]")
+{
+    const double offset = GENERATE(0.2, 0.4); // 50% and 100% of a 0.4 mm wall.
+    const double mirror = GENERATE(1., -1.);
+    CAPTURE(offset, mirror);
+    const auto point = [mirror](double x, double y) { return Point::new_scale(mirror * x, y); };
+    const Point seam_start = point(0., 0.);
+    const double gap_component = 0.04 / std::sqrt(2.); // Default 10% seam gap for a 0.4 mm nozzle.
+    const Point seam_end = point(-gap_component, -gap_component);
+    const Polyline original{seam_start, point(0., -10.)};
+    const Lines support{Line(point(0.4, -10.), point(0.4, 1.))};
+    const int preferred_dir = mirror > 0. ? +1 : -1;
+
+    // The inward miter backtracks. The opposite offset can still be supported
+    // by the outer bead, so support alone must not make it an inward candidate.
+    Polyline outward = original;
+    REQUIRE(offset_wipe_path(outward, seam_start, seam_end, seam_end,
+                             -preferred_dir, scale_(offset), scale_(2.)));
+    Lines all_support = support;
+    const Lines current = original.lines();
+    all_support.insert(all_support.end(), current.begin(), current.end());
+    REQUIRE(wipe_path_support_score(outward, seam_end,
+        LinesDistancer<Line>(support), LinesDistancer<Line>(all_support), scale_(0.4)).has_value());
+    REQUIRE(mirror * outward.points[1].x() < 0.);
+
+    Polyline path = original;
+    if (offset_wipe_path_toward_support(path, seam_start, seam_end, seam_end,
+            preferred_dir, scale_(offset), scale_(2.), support, support, current, scale_(0.4))) {
+        REQUIRE(path.points.size() >= 2);
+        CHECK(mirror * path.points[1].x() > 0.);
+    } else {
+        CHECK(path.points == original.points);
+    }
+
+    // An inward pre-move provides a clear connector to the direct fallback.
+    // The fix must retain this usable inward path, rather than reject all wipes.
+    const Point wipe_start = point(0.05, -0.04);
+    path = original;
+    REQUIRE(offset_wipe_path_toward_support(path, seam_start, seam_end, wipe_start,
+        preferred_dir, scale_(offset), scale_(2.), support, support, current, scale_(0.4)));
+    REQUIRE(path.points.size() == 2);
+    CHECK(mirror * path.points[1].x() > mirror * wipe_start.x());
+}
+
+TEST_CASE("Direct inward wipes respect the nozzle position and intervening walls", "[WipePath][Regression]")
+{
+    const int mirror = GENERATE(1, -1);
+    const bool crossing_wall = GENERATE(false, true);
+    CAPTURE(mirror, crossing_wall);
+    const auto point = [mirror](double x, double y) { return Point::new_scale(mirror * x, y); };
+    const Point seam_start = point(0., 0.);
+    const double gap_component = 0.04 / std::sqrt(2.);
+    const Point seam_end = point(-gap_component, -gap_component);
+    const Polyline original{seam_start, point(0., -10.)};
+    const Lines support{Line(point(0.4, -10.), point(0.4, 1.))};
+    Lines current = original.lines();
+    // The direct destination is near x=0.172. A nozzle already farther inward
+    // must not return toward the wall. An inward connector from x=0.05 must
+    // still be rejected when another wall lies between it and the destination.
+    const Point wipe_start = point(crossing_wall ? 0.05 : 0.3, -0.04);
+    if (crossing_wall)
+        current.emplace_back(point(0.1, -0.2), point(0.1, 0.2));
+    Polyline path = original;
+    REQUIRE_FALSE(offset_wipe_path_toward_support(path, seam_start, seam_end, wipe_start,
+        mirror, scale_(0.2), scale_(2.), support, support, current, scale_(0.4)));
+    CHECK(path.points == original.points);
+}
+
+TEST_CASE("Inward wipe checks the material side after leaving an open wall endpoint", "[WipePath][Regression]")
+{
+    const bool require_clearance = GENERATE(false, true);
+    CAPTURE(require_clearance);
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(0., 0.);
+    const LinesDistancer<Line> current(Lines{Line(seam, point(2., 0.))});
+    const LinesDistancer<Line> support(Lines{Line(point(0., 0.4), point(2., 0.4))});
+    Polyline path{seam, point(0.1, 0.2), point(0.5, 0.2), point(-0.2, 0.2)};
+    REQUIRE(wipe_path_stays_on_material_side(
+        path, seam, Vec2d(0., 1.), support, current, scale_(0.2), require_clearance));
+
+    // Rounding the open endpoint keeps 0.2 mm of unsigned clearance while
+    // moving to the air side. Checking only the first direction cannot catch it.
+    path.points.push_back(point(-0.2, -0.2));
+    path.points.push_back(point(0.5, -0.2));
+    REQUIRE_FALSE(wipe_path_stays_on_material_side(
+        path, seam, Vec2d(0., 1.), support, current, scale_(0.2), require_clearance));
+}
+
+TEST_CASE("Direct inward fallbacks check the material side without requiring clearance", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(0., 0.);
+    const LinesDistancer<Line> current(Lines{Line(point(-2., 0.), point(2., 0.))});
+    const LinesDistancer<Line> support(Lines{Line(point(-2., 0.4), point(2., 0.4))});
+    REQUIRE(wipe_path_stays_on_material_side(
+        Polyline{seam, point(0., 0.05)}, seam, Vec2d(0., 1.), support, current, scale_(0.2), false));
+
+    // Even if the construction's initial direction points outward, the nearby
+    // inner wall still identifies the material side independently of that hint.
+    REQUIRE_FALSE(wipe_path_stays_on_material_side(
+        Polyline{seam, point(0., -0.05)}, seam, Vec2d(0., -1.), support, current, scale_(0.2), false));
+}
+
+TEST_CASE("Stored wipe path may return to the current wall after reaching an earlier wall", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    const Polyline path{Point(0, 0), Point(0, 2 * s), Point(10 * s, 0)};
+    const Lines earlier{Line(Point(0, 2 * s), Point(10 * s, 2 * s))};
+    const Lines current{Line(Point(0, 0), Point(10 * s, 0))};
+
+    Lines all_support = earlier;
+    all_support.insert(all_support.end(), current.begin(), current.end());
+    REQUIRE(wipe_path_support_score(path, Point(0, 0),
+        LinesDistancer<Line>(earlier), LinesDistancer<Line>(all_support), s).has_value());
+}
+
+TEST_CASE("Stored wipe path tolerates compounded coordinate quantization", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    const coord_t rounding = coord_t(3.5 * SCALED_EPSILON);
+    const Point destination(0, 2 * s + rounding);
+    const Polyline path{Point(0, 0), destination};
+    const Lines earlier{Line(Point(-s, 0), Point(s, 0))};
+
+    const LinesDistancer<Line> support_distancer(earlier);
+    REQUIRE(wipe_path_support_score(path, destination, support_distancer, support_distancer, 2 * s).has_value());
+}
+
+TEST_CASE("Stored wipe path stays on the inner side of a short external loop", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(55.270, 41.666);
+    Polyline path{
+        seam, point(55.241, 41.568), point(55.210, 41.518), point(55.195, 41.506),
+        point(55.173, 41.496), point(55.141, 41.479), point(55.126, 41.473),
+        point(55.068, 41.421), point(55.055, 41.416), point(55.006, 41.382),
+        point(54.808, 41.231), point(54.687, 41.153), point(54.590, 41.069),
+        point(54.529, 41.027), point(54.441, 40.949), point(54.299, 40.803),
+        point(54.219, 40.674), point(54.183, 40.581), point(54.172, 40.511),
+        point(54.182, 40.450), point(54.225, 40.358), point(54.256, 40.318),
+        point(54.341, 40.251), point(54.418, 40.211), point(54.499, 40.176),
+        point(54.675, 40.124), point(54.797, 40.106), point(54.978, 40.092),
+        point(55.245, 40.093), point(55.443, 40.103), point(55.591, 40.128),
+        point(55.771, 40.164), point(55.962, 40.217), point(56.103, 40.264),
+        point(56.167, 40.295), point(56.246, 40.341), point(56.338, 40.412),
+        point(56.382, 40.469), point(56.396, 40.527), point(56.386, 40.609),
+        point(56.313, 40.740), point(56.208, 40.867), point(56.071, 40.991),
+        point(55.946, 41.094), point(55.812, 41.198), point(55.722, 41.262),
+        point(55.665, 41.294), point(55.556, 41.398), point(55.520, 41.414),
+        point(55.495, 41.424), point(55.478, 41.437), point(55.442, 41.469),
+        point(55.407, 41.505), point(55.386, 41.510), point(55.367, 41.516),
+        point(55.335, 41.535), point(55.292, 41.575), seam,
+    };
+    const Polyline original = path;
+    const Polyline inner{
+        point(55.111, 41.176), point(54.946, 41.050), point(54.824, 40.970),
+        point(54.733, 40.892), point(54.668, 40.846), point(54.598, 40.784),
+        point(54.480, 40.662), point(54.424, 40.572), point(54.403, 40.516),
+        point(54.420, 40.479), point(54.465, 40.443), point(54.577, 40.390),
+        point(54.723, 40.347), point(54.823, 40.333), point(54.986, 40.320),
+        point(55.239, 40.321), point(55.418, 40.330), point(55.550, 40.352),
+        point(55.718, 40.386), point(55.896, 40.435), point(56.017, 40.476),
+        point(56.061, 40.497), point(56.118, 40.530), point(56.154, 40.558),
+        point(56.124, 40.611), point(56.043, 40.709), point(55.921, 40.819),
+        point(55.804, 40.916), point(55.676, 41.015), point(55.600, 41.069),
+        point(55.526, 41.114), point(55.426, 41.207), point(55.379, 41.235),
+        point(55.349, 41.259), point(55.291, 41.317), point(55.252, 41.293),
+        point(55.192, 41.238), point(55.111, 41.176),
+    };
+    Lines target_support = inner.lines();
+    // Orca: a different contour has a slightly closer inner wall on the air
+    // side of this short loop. It must not override the loop's material side.
+    target_support.emplace_back(point(55.159, 42.147), point(55.299, 42.011));
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam, seam, seam, +1, scale_(0.293166), scale_(0.8),
+        target_support, target_support, original.lines(), scale_(0.4)));
+    REQUIRE(path.points.size() >= 2);
+
+    // Orca: the nearest inner wall is below the seam; accepting the opposite
+    // offset would send the wipe into air outside this small contour.
+    CHECK(path.points[1].y() < seam.y());
+}
+
+TEST_CASE("Stored wipe path does not return to the external wall after moving inward", "[WipePath][Regression]")
+{
+    const auto point = [](double x, double y) { return Point::new_scale(x, y); };
+    const Point seam = point(47.451, 54.647);
+    Polyline path{
+        seam, point(47.370, 54.634), point(47.345, 54.619), point(47.333, 54.604),
+        point(47.322, 54.572), point(47.312, 54.518), point(47.315, 54.445),
+        point(47.345, 54.257), point(47.357, 54.206), point(47.380, 54.135),
+        point(47.418, 54.065), point(47.514, 53.917), point(47.537, 53.886),
+        point(47.597, 53.834), point(47.705, 53.769), point(47.747, 53.748),
+        point(47.785, 53.734), point(47.825, 53.735), point(47.862, 53.746),
+        point(47.889, 53.763), point(47.939, 53.817), point(47.964, 53.856),
+        point(47.979, 53.897), point(47.986, 53.943), point(47.986, 54.005),
+        point(47.977, 54.075), point(47.949, 54.188), point(47.902, 54.321),
+        point(47.871, 54.388), point(47.835, 54.444), point(47.765, 54.521),
+        point(47.741, 54.542), point(47.675, 54.589), point(47.615, 54.620),
+        point(47.518, 54.642), seam,
+    };
+    const Polyline original = path;
+    const Polyline inner{
+        point(47.541, 54.281), point(47.545, 54.258), point(47.560, 54.212),
+        point(47.577, 54.181), point(47.682, 54.017), point(47.707, 53.995),
+        point(47.789, 53.946), point(47.791, 53.958), point(47.791, 53.992),
+        point(47.785, 54.039), point(47.762, 54.132), point(47.721, 54.249),
+        point(47.700, 54.294), point(47.680, 54.324), point(47.628, 54.382),
+        point(47.574, 54.422), point(47.548, 54.435), point(47.513, 54.443),
+        point(47.541, 54.281),
+    };
+    const double offset = scale_(0.229999);
+
+    REQUIRE(offset_wipe_path_toward_support(
+        path, seam, seam, seam, +1, offset, scale_(0.8),
+        inner.lines(), inner.lines(), original.lines(), scale_(0.4)));
+
+    // Orca: after reaching the inner wall, a full-width inward wipe must not
+    // collapse back onto the external perimeter at a tight turn.
+    for (size_t index = 1; index < path.points.size(); ++index) {
+        double clearance = std::numeric_limits<double>::infinity();
+        for (const Line &line : original.lines())
+            clearance = std::min(clearance, line.distance_to(path.points[index]));
+        CHECK(clearance >= 0.75 * offset);
+    }
+}
+
+// Orca: wipe_on_loops_destination coverage for every orientation.
+
+TEST_CASE("wipe_on_loops destination is on the material side for every orientation", "[WipePath]")
+{
+    const auto [is_ccw, is_hole] = GENERATE(
+        table<bool, bool>({{true, false}, {false, false}, {false, true}, {true, true}}));
+    INFO("is_ccw=" << is_ccw << ", is_hole=" << is_hole);
+    const double nozzle_diameter = GENERATE(0.4, 0.8);
+    const bool subdivided = GENERATE(false, true);
+    INFO("nozzle diameter=" << nozzle_diameter << ", subdivided=" << subdivided);
+
+    const coord_t s = scale_(1.0);
+    std::vector<Point> contour = {Point(0, 0), Point(20 * s, 0), Point(20 * s, 20 * s), Point(0, 20 * s)};
+    if (subdivided) {
+        // The same square, with path boundaries inside both sampling distances near the seam.
+        contour = {Point(0, 0), Point(scale_(0.03), 0.), Point(scale_(0.2), 0.),
+                   Point(20 * s, 0), Point(20 * s, 20 * s), Point(0, 20 * s),
+                   Point(0., scale_(0.2)), Point(0., scale_(0.03))};
+    }
+    if (!is_ccw)
+        for (Point &point : contour)
+            std::swap(point.x(), point.y());
+    ExtrusionPaths paths;
+    if (subdivided) {
+        for (size_t i = 0; i < contour.size(); ++i)
+            paths.push_back(make_path({contour[i], contour[(i + 1) % contour.size()]}));
+    } else {
+        paths = make_loop_paths(contour);
+    }
+
+    const std::optional<Point> destination =
+        wipe_on_loops_destination(paths, scale_(nozzle_diameter), is_ccw, is_hole);
+    REQUIRE(destination.has_value());
+
+    const Point seam_start = paths.front().first_point();
+    const Vec2d first_edge = (paths.front().polyline.points[1].to_point() - seam_start).cast<double>();
+    Vec2d material_normal(-first_edge.y(), first_edge.x());
+    if (is_ccw == is_hole)
+        material_normal = -material_normal;
+
+    // Orca: contours use their winding's inside; holes use the opposite side.
+    const Vec2d move = destination->cast<double>() - seam_start.cast<double>();
+    REQUIRE(move.dot(material_normal) > 0.);
+    // Move 20% of the nozzle diameter, turning through one third of the material-side
+    // corner: 90 degrees for a contour, 270 degrees for a hole.
+    const double distance = scale_(0.2 * nozzle_diameter);
+    const double angle = is_hole ? PI / 2. : PI / 6.;
+    CHECK_THAT(move.dot(first_edge.normalized()), Catch::Matchers::WithinAbs(distance * std::cos(angle), 2.));
+    CHECK_THAT(move.dot(material_normal.normalized()), Catch::Matchers::WithinAbs(distance * std::sin(angle), 2.));
+}
+
+TEST_CASE("wipe_on_loops returns destination for small but nonzero loop", "[WipePath]")
+{
+    // Orca: a 0.5 mm square is tight for a 0.4 mm nozzle but remains valid.
+    const coord_t s = scale_(1.0);
+    auto paths = make_loop_paths({Point(0, 0), Point(s / 2, 0), Point(s / 2, s / 2), Point(0, s / 2)});
+
+    auto dest = wipe_on_loops_destination(paths, scale_(0.4), true, false);
+    REQUIRE(dest.has_value());
+}
+
+TEST_CASE("wipe_on_loops destination is nullopt for degenerate single-point path", "[WipePath]")
+{
+    const coord_t s = scale_(1.0);
+    auto paths = make_paths({Point(50 * s, 50 * s)});
+
+    auto dest = wipe_on_loops_destination(paths, scale_(0.4), true, false);
+    REQUIRE_FALSE(dest.has_value());
+}
diff --git a/tests/libslic3r/test_wipe_tower.cpp b/tests/libslic3r/test_wipe_tower.cpp
new file mode 100644
index 0000000000..277e11eceb
--- /dev/null
+++ b/tests/libslic3r/test_wipe_tower.cpp
@@ -0,0 +1,289 @@
+#include <catch2/catch_all.hpp>
+
+#include <cmath>
+
+#include "libslic3r/BoundingBox.hpp"
+#include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/GCode/WipeTower.hpp"
+#include "libslic3r/GCode/WipeTower2.hpp"
+#include "libslic3r/Print.hpp"
+#include "libslic3r/PrintConfig.hpp"
+
+using namespace Slic3r;
+using Catch::Matchers::WithinAbs;
+
+// A Bambu P1S project that reproduced the off-plate brim: two PLAs priming 30 and 45 mm3 in
+// separate adhesiveness categories on a 35 mm tower, 0.21 mm layers, 0.4 nozzle (0.5 mm lines),
+// 150 % infill gap (0.75 mm line pitch), rib width 8, 16 mm tall.
+static std::vector<WipeTower::PurgeEstimate> cube_purges(int first_category = 100)
+{
+    return {{30.f, first_category}, {45.f, 0}};
+}
+
+TEST_CASE("Cone base polygon bulges past the body box", "[WipeTower]") {
+    // Zero angle: plain body box.
+    const Polygon box = WipeTower2::cone_base_polygon(35., 20., 100., 0.);
+    CHECK(box.points.size() == 4);
+    CHECK(get_extents(box).size() == Point::new_scale(Vec2d(35., 20.)));
+    // A 25-degree cone on a 100 mm tower: base radius R = tan(12.5deg)*100 = 22.2 mm,
+    // which exceeds the body half-depth, so the footprint bulges to center +- R in y
+    // (support_scale keeps the x extent compressed near the body).
+    const Polygon     base = WipeTower2::cone_base_polygon(35., 20., 100., 25.);
+    const BoundingBox bb   = get_extents(base);
+    const double      R    = std::tan(25. / 2. * M_PI / 180.) * 100.;
+    CHECK_THAT(unscaled(bb.min.y()), WithinAbs(10. - R, 0.1));
+    CHECK_THAT(unscaled(bb.max.y()), WithinAbs(10. + R, 0.1));
+    // The footprint always contains the body box.
+    CHECK(diff(Polygons{box}, Polygons{base}).empty());
+}
+
+TEST_CASE("Type1 block-stack depth quantizes each purge to whole lines", "[WipeTower]") {
+    // A 0.5 mm line at 0.21 mm carries 0.0955 mm3 per mm, so across the 34 mm between the
+    // perimeters 30 mm3 is 10 lines and 45 mm3 is 14: 7.5 + 10.5 at the 0.75 mm pitch behind
+    // one perimeter width. The generated mesh of the project measured exactly this.
+    CHECK_THAT(WipeTower::estimate_tower_blocks_depth(cube_purges(), 35.f, 0.21f, 0.4f, 1.5f), WithinAbs(18.5f, 0.01f));
+    // Sharing one category, a layer can never purge into every filament (one of them starts
+    // the layer), so the block is sized by its worst layer and the 10-line purge drops out.
+    CHECK_THAT(WipeTower::estimate_tower_blocks_depth(cube_purges(0), 35.f, 0.21f, 0.4f, 1.5f), WithinAbs(11.0f, 0.01f));
+    CHECK_THAT(WipeTower::estimate_tower_blocks_depth({}, 35.f, 0.2f, 0.4f, 1.f), WithinAbs(0.f, 1e-6f));
+    // A width narrower than two perimeter widths cannot hold purge lines.
+    CHECK_THAT(WipeTower::estimate_tower_blocks_depth({{45.f, 0}}, 0.9f, 0.2f, 0.4f, 1.f), WithinAbs(0.f, 1e-6f));
+}
+
+TEST_CASE("A nozzle change adds its ramming lines to the block", "[WipeTower]") {
+    // 10 mm of 1.75 mm filament (24.05 mm3) laid as 1.0 mm nozzle-change lines at 0.2 mm
+    // (0.1914 mm2 each) is 125.7 mm; across the 48.5 mm available that is 3 lines of 1.0 mm.
+    std::vector<WipeTower::PurgeEstimate> purges{{100.f, 0}, {100.f, 0}};
+    const float without_change = WipeTower::estimate_tower_blocks_depth(purges, 50.f, 0.2f, 0.4f, 1.f);
+    purges.front().filament_change_length = 10.f;
+    CHECK_THAT(WipeTower::estimate_tower_blocks_depth(purges, 50.f, 0.2f, 0.4f, 1.f) - without_change, WithinAbs(3.f, 1e-4f));
+}
+
+TEST_CASE("Rib tower footprint estimate covers the generated footprint", "[WipeTower]") {
+    // The generated first-layer wall bbox of the project measured 29.56 mm from the sliced
+    // G-code; the volume-only estimate said 23.585 mm.
+    const float side = WipeTower::estimate_rib_tower_bbox_side(cube_purges(), 35.f, 0.21f, 0.4f, 1.5f, 8.f, 0.f, 16.f);
+    CHECK(side >= 29.56f);
+    CHECK(side <= 29.56f + 4.f); // without grossly over-reserving plate space
+    // Separate categories stack their blocks, so the footprint must not shrink when they differ.
+    CHECK(side >= WipeTower::estimate_rib_tower_bbox_side(cube_purges(0), 35.f, 0.21f, 0.4f, 1.5f, 8.f, 0.f, 16.f));
+    CHECK_THAT(WipeTower::estimate_rib_tower_bbox_side({}, 35.f, 0.2f, 0.4f, 1.f, 8.f, 0.f, 16.f), WithinAbs(0.f, 1e-6f));
+}
+
+TEST_CASE("Rib footprint extends the ribs, not the body, below the stability minimum", "[WipeTower]") {
+    // A 10 mm body under a 90 mm print: the ribs stretch to the minimum depth's diagonal, and
+    // the rib width is capped at half the body, so the square grows to minimum + 5 / sqrt(2).
+    const float min_depth = WipeTower::get_limit_depth_by_height(90.f);
+    REQUIRE(min_depth > 10.f);
+    CHECK_THAT(WipeTower::rib_footprint_side(10.f, 10.f, 8.f, 0.f, 90.f), WithinAbs(min_depth + 5.f / std::sqrt(2.f), 1e-4f));
+    // The extra rib length runs along the diagonal, so it shows as its projection on each axis.
+    const float plain = WipeTower::rib_footprint_side(30.f, 30.f, 8.f, 0.f, 5.f);
+    CHECK_THAT(plain, WithinAbs(30.f + 8.f / std::sqrt(2.f), 1e-4f));
+    CHECK_THAT(WipeTower::rib_footprint_side(30.f, 30.f, 8.f, 4.f, 5.f) - plain, WithinAbs(4.f / std::sqrt(2.f), 1e-4f));
+    // A negative extra length cannot pull the ribs inside the diagonal.
+    CHECK_THAT(WipeTower::rib_footprint_side(30.f, 30.f, 8.f, -4.f, 5.f), WithinAbs(plain, 1e-4f));
+    CHECK_THAT(WipeTower::rib_footprint_side(0.f, 30.f, 8.f, 0.f, 5.f), WithinAbs(0.f, 1e-6f));
+}
+
+TEST_CASE("Brim width estimate matches each generator's loop quantization", "[WipeTower]") {
+    // 3 mm configured, 0.4 nozzle, 0.2 first layer: 0.4571 mm spacing, 7 loops. WipeTower2
+    // prints and reports the 7 loops; WipeTower reports half a spacing of line width on top.
+    const float spacing = 0.5f - 0.2f * float(1. - M_PI_4);
+    CHECK_THAT(WipeTower::estimate_brim_real_width(3.f, 0.4f, 0.2f, true), WithinAbs(7.f * spacing, 1e-4f));
+    CHECK_THAT(WipeTower::estimate_brim_real_width(3.f, 0.4f, 0.2f, false), WithinAbs(7.5f * spacing, 1e-4f));
+    CHECK_THAT(WipeTower::estimate_brim_real_width(0.f, 0.4f, 0.2f, true), WithinAbs(0.f, 1e-6f));
+}
+
+// ---------------------------------------------------------------------------------------------
+// "No sparse layers": the compaction rule and the clearance it demands of the plate.
+// ---------------------------------------------------------------------------------------------
+
+// A square of side mm centred on (cx, cy), in bed coordinates.
+static Polygon centered_square(double cx, double cy, double side)
+{
+    const double h = 0.5 * side;
+    Polygon      poly;
+    poly.points = {Point::new_scale(cx - h, cy - h), Point::new_scale(cx + h, cy - h),
+                   Point::new_scale(cx + h, cy + h), Point::new_scale(cx - h, cy + h)};
+    return poly;
+}
+
+static WipeTower::ToolChangeResult make_tcr(int initial_tool, int new_tool, float layer_height)
+{
+    WipeTower::ToolChangeResult tcr{};
+    tcr.initial_tool = initial_tool;
+    tcr.new_tool     = new_tool;
+    tcr.layer_height = layer_height;
+    return tcr;
+}
+
+// A 20 mm square tower at the bed origin, no spiral z-hop, so the keep-out zone is the bare
+// footprint and every distance below is one the test sets.
+static PrintConfig clearance_config()
+{
+    PrintConfig cfg;
+    cfg.extruder_clearance_radius.value       = 40.;
+    cfg.extruder_clearance_dist_to_rod.value  = 20.;
+    cfg.extruder_clearance_height_to_rod.value = 25.;
+    cfg.extruder_clearance_height_to_lid.value = 120.;
+    cfg.nozzle_height.value                   = 5.;
+    cfg.nozzle_diameter.values                = {0.4};
+    cfg.z_hop.values                          = {0.};
+    cfg.travel_slope.values                   = {3.};
+    return cfg;
+}
+
+TEST_CASE("Sparse layers are skipped only when nothing else needs a tower on every layer", "[WipeTower][NoSparseLayers]") {
+    PrintConfig cfg;
+    cfg.timelapse_type.value            = TimelapseType::tlTraditional;
+    cfg.enable_wrapping_detection.value = false;
+
+    cfg.wipe_tower_no_sparse_layers.value = false;
+    CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg));
+    cfg.wipe_tower_no_sparse_layers.value = true;
+    CHECK(wipe_tower_sparse_layers_skipped(cfg));
+
+    // Both park the nozzle on the tower every layer, so no layer is ever dropped and the option
+    // must read as off everywhere rather than compact in one place and not another.
+    cfg.timelapse_type.value = TimelapseType::tlSmooth;
+    CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg));
+    cfg.timelapse_type.value            = TimelapseType::tlTraditional;
+    cfg.enable_wrapping_detection.value = true;
+    CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg));
+}
+
+TEST_CASE("A planned layer is sparse only when its single tool change keeps the filament", "[WipeTower][NoSparseLayers]") {
+    CHECK(wipe_tower_layer_is_sparse({make_tcr(1, 1, 0.2f)}));
+    CHECK_FALSE(wipe_tower_layer_is_sparse({make_tcr(0, 1, 0.2f)}));
+    // A second entry means the layer carries real work whatever the tools are.
+    CHECK_FALSE(wipe_tower_layer_is_sparse({make_tcr(1, 1, 0.2f), make_tcr(1, 1, 0.2f)}));
+    CHECK_FALSE(wipe_tower_layer_is_sparse({}));
+}
+
+TEST_CASE("The compacted tower falls one layer height behind the object per sparse layer", "[WipeTower][NoSparseLayers]") {
+    // Five 0.2 mm layers off a 0.1 mm z offset, the middle two sparse. The object reaches
+    // 0.1 + 5 * 0.2 = 1.1; the tower only grows on the three printed layers, so it ends at
+    // 0.1 + 3 * 0.2 = 0.7 and a sparse layer carries the previous value rather than its own.
+    const std::vector<std::vector<WipeTower::ToolChangeResult>> tool_changes{
+        {make_tcr(0, 1, 0.2f)}, {make_tcr(1, 1, 0.2f)}, {make_tcr(1, 1, 0.2f)},
+        {make_tcr(1, 0, 0.2f)}, {make_tcr(0, 1, 0.2f)}};
+
+    const std::vector<float> tower_z = compute_compacted_wipe_tower_z(tool_changes, 0.1f);
+    REQUIRE(tower_z.size() == tool_changes.size());
+    CHECK_THAT(tower_z[0], WithinAbs(0.3f, 1e-5f));
+    CHECK_THAT(tower_z[1], WithinAbs(0.3f, 1e-5f));
+    CHECK_THAT(tower_z[2], WithinAbs(0.3f, 1e-5f));
+    CHECK_THAT(tower_z[3], WithinAbs(0.5f, 1e-5f));
+    CHECK_THAT(tower_z[4], WithinAbs(0.7f, 1e-5f));
+    CHECK_THAT(1.1f - tower_z.back(), WithinAbs(2 * 0.2f, 1e-5f));
+
+    // Without a base the tower starts at the bed, and an empty layer carries over like a sparse one.
+    const std::vector<float> no_offset = compute_compacted_wipe_tower_z({{make_tcr(0, 1, 0.2f)}, {}}, 0.f);
+    CHECK_THAT(no_offset[0], WithinAbs(0.2f, 1e-5f));
+    CHECK_THAT(no_offset[1], WithinAbs(0.2f, 1e-5f));
+}
+
+TEST_CASE("The tower keep-out zone grows by the spiral z-hop envelope", "[WipeTower][NoSparseLayers]") {
+    PrintConfig   cfg       = clearance_config();
+    const Polygon footprint = centered_square(0., 0., 20.);
+
+    // No lift, no envelope: the zone works on the bare footprint.
+    CHECK_THAT(unscaled(compacted_wipe_tower_zone(cfg, footprint).hull.bounding_box().max.x()), WithinAbs(10., 1e-6));
+
+    // A spiral lift leaves the outline at low z, so it counts as tower. The circle reaches
+    // 2 * lift / (2*pi*atan(slope)) past the outline, matching GCodeWriter: 2*2/(2*pi*atan(3)) = 0.51 mm.
+    cfg.z_hop.values = {2.};
+    const CompactedTowerZone lifted = compacted_wipe_tower_zone(cfg, footprint);
+    CHECK_THAT(unscaled(lifted.hull.bounding_box().max.x()), WithinAbs(10.51, 0.02));
+    CHECK_THAT(unscaled(lifted.hull.bounding_box().min.y()), WithinAbs(-10.51, 0.02));
+    CHECK(diff(Polygons{footprint}, Polygons{lifted.hull}).empty());
+
+    // z_hop is capped at 5 mm by the option, so a taller lift cannot widen the zone further.
+    cfg.z_hop.values = {10.};
+    const double capped = unscaled(compacted_wipe_tower_zone(cfg, footprint).hull.bounding_box().max.x());
+    CHECK_THAT(capped, WithinAbs(10. + 2. * 5. / (2. * M_PI * std::atan(3.)), 0.02));
+
+    // The rod sweeps the whole X axis, so its band is the tower's y span plus half the rod offset.
+    CHECK_THAT(unscaled(lifted.bbox_rod.max.y()), WithinAbs(10.51 + 10., 0.02));
+}
+
+TEST_CASE("An object beside a compacted tower is limited by the nearest part of the toolhead", "[WipeTower][NoSparseLayers]") {
+    const PrintConfig        cfg  = clearance_config();
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.));
+
+    // Each side carries half its clearance less 0.1 mm slack, so the two outlines meet when the
+    // objects are a full clearance apart: 2 * (4 - 0.2) / 2 = 3.8 mm for the bare nozzle cone,
+    // 2 * (40 - 0.2) / 2 = 39.8 mm for the head body. A 10 mm object at x leaves a gap of x - 15.
+    const double tall = 50., shortish = 3.;
+
+    // Gap 1 mm, inside the nozzle cone: the object may not rise above the tower at all.
+    const CompactedTowerClearance touching = compacted_wipe_tower_clearance(cfg, zone, centered_square(16., 0., 10.), tall);
+    CHECK_THAT(touching.allowed_rise, WithinAbs(0., 1e-9));
+
+    // Gap 10 mm: clear of the cone but inside the head body, which starts at nozzle_height.
+    const CompactedTowerClearance near_body = compacted_wipe_tower_clearance(cfg, zone, centered_square(25., 0., 10.), tall);
+    CHECK(near_body.near_body);
+    CHECK_THAT(near_body.allowed_rise, WithinAbs(5., 1e-9));
+    CHECK_THAT(near_body.body_clearance, WithinAbs(40., 1e-9));
+
+    // The same spot, but an object that never rises past the cone. The body sits above the cone, so
+    // it cannot reach this object however close it stands, and only the narrow tier applies.
+    const CompactedTowerClearance low = compacted_wipe_tower_clearance(cfg, zone, centered_square(25., 0., 10.), shortish);
+    CHECK_FALSE(low.near_body);
+    CHECK_THAT(low.body_clearance, WithinAbs(4., 1e-9));
+    CHECK_THAT(low.allowed_rise, WithinAbs(25., 1e-9));
+
+    // Gap 55 mm, clear of the head entirely: the rod is the obstacle, since the object shares the
+    // tower's y band and the rod spans the whole x axis however far apart the two stand.
+    const CompactedTowerClearance far_in_band = compacted_wipe_tower_clearance(cfg, zone, centered_square(70., 0., 10.), tall);
+    CHECK_FALSE(far_in_band.near_body);
+    CHECK_THAT(far_in_band.far_clearance, WithinAbs(25., 1e-9));
+    CHECK_THAT(far_in_band.allowed_rise, WithinAbs(25., 1e-9));
+
+    // Out of the band the rod passes over it and only the lid is left.
+    const CompactedTowerClearance out_of_band = compacted_wipe_tower_clearance(cfg, zone, centered_square(70., 60., 10.), tall);
+    CHECK_THAT(out_of_band.allowed_rise, WithinAbs(120., 1e-9));
+}
+
+TEST_CASE("The ring drawn around the tower meets the outline drawn around an offender", "[WipeTower][NoSparseLayers]") {
+    const PrintConfig        cfg  = clearance_config();
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.));
+
+    // What the plater draws has to be what the check tested, otherwise a user moves an object until
+    // the outlines part and slicing still refuses the plate. Both halves of the 3.8 mm nozzle
+    // clearance: at a 3 mm gap the rings overlap and the rise limit is zero, at 5 mm neither holds.
+    for (const auto &c : {std::make_pair(18., true), std::make_pair(20., false)}) {
+        DYNAMIC_SECTION("object at x = " << c.first) {
+            const Polygon                 hull      = centered_square(c.first, 0., 10.);
+            const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(cfg, zone, hull, 3.);
+            const Polygons                rings     = compacted_wipe_tower_rings(zone, compacted_tower_body_tier(clearance));
+            const Polygon                 outline   = compacted_wipe_tower_offender_outline(hull, clearance.body_clearance);
+            const bool                    outlines_meet = ! intersection(rings, Polygons{outline}).empty();
+            const bool                    rise_denied   = clearance.allowed_rise < EPSILON;
+            CHECK(outlines_meet == c.second);
+            CHECK(rise_denied == c.second);
+        }
+    }
+}
+
+TEST_CASE("Only the keep-out ring an object is measured against is drawn", "[WipeTower][NoSparseLayers]") {
+    const PrintConfig        cfg  = clearance_config();
+    const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.));
+
+    // Drawing the wide ring when no object is judged on it would show a keep-out zone the check can
+    // never trip, so it is added only once some object reaches past the nozzle cone.
+    CHECK(compacted_wipe_tower_rings(zone, false).size() == zone.grown_nozzle.size());
+    CHECK(compacted_wipe_tower_rings(zone, true).size() == zone.grown_nozzle.size() + zone.grown_body.size());
+    CHECK_THAT(unscaled(get_extents(zone.grown_nozzle).max.x()), WithinAbs(10. + 0.5 * (4. - 0.2), 0.02));
+    CHECK_THAT(unscaled(get_extents(zone.grown_body).max.x()), WithinAbs(10. + 0.5 * (40. - 0.2), 0.02));
+}
+
+TEST_CASE("Footprint padding covers the brim and the extrusion half width on each side", "[WipeTower][NoSparseLayers]") {
+    // A nominal outline hulls extrusion centre lines and is re-centred once the real wall is known,
+    // so a line width per side on top of the brim is what keeps an estimate enclosing the real tower.
+    const PrintConfig cfg = clearance_config();
+    CHECK_THAT(compacted_tower_footprint_padding(cfg, 2.), WithinAbs(2. + 2. * 0.4, 1e-9));
+    CHECK_THAT(compacted_tower_footprint_padding(cfg, 0.), WithinAbs(2. * 0.4, 1e-9));
+    // Callers whose outline already carries the brim pass zero, and a negative one cannot shrink it.
+    CHECK_THAT(compacted_tower_footprint_padding(cfg, -5.), WithinAbs(2. * 0.4, 1e-9));
+}
diff --git a/tests/libslic3r/test_wipe_tower_estimate.cpp b/tests/libslic3r/test_wipe_tower_estimate.cpp
new file mode 100644
index 0000000000..20644200f3
--- /dev/null
+++ b/tests/libslic3r/test_wipe_tower_estimate.cpp
@@ -0,0 +1,351 @@
+#include <catch2/catch_all.hpp>
+
+#include "libslic3r/BoundingBox.hpp"
+#include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/GCode/WipeTower.hpp"
+#include "libslic3r/GCode/WipeTower2.hpp"
+#include "libslic3r/GCode/WipeTowerEstimate.hpp"
+#include "libslic3r/PrintConfig.hpp"
+
+#include <cmath>
+#include <numeric>
+#include <string>
+
+using namespace Slic3r;
+using Catch::Matchers::WithinAbs;
+
+// Rectangle wall, one nozzle, 100 mm3 prime volume on a 50 mm wide tower at 0.2 mm layers: one
+// purge is 10 mm of depth. The flush matrix is off here; the shipped-default case covers it.
+// Built as PresetBundle::full_config builds the GUI's: apply() creates each enum as a
+// ConfigOptionEnumGeneric, where full_print_config() would clone the static defaults'
+// ConfigOptionEnum<T>. The estimate has to read either.
+static DynamicPrintConfig preset_shaped_defaults()
+{
+    DynamicPrintConfig config;
+    config.apply(FullPrintConfig::defaults());
+    return config;
+}
+
+static DynamicPrintConfig make_config(const char *wall_type = "rectangle")
+{
+    DynamicPrintConfig config = preset_shaped_defaults();
+    config.set_key_value("prime_tower_width", new ConfigOptionFloat(50.));
+    config.set_key_value("prime_volume", new ConfigOptionFloat(100.));
+    config.set_key_value("filament_prime_volume", new ConfigOptionFloats({100.}));
+    config.set_key_value("filament_adhesiveness_category", new ConfigOptionInts({0}));
+    config.set_key_value("prime_tower_infill_gap", new ConfigOptionPercent(100.));
+    config.set_key_value("wipe_tower_extra_spacing", new ConfigOptionPercent(100.));
+    config.set_key_value("prime_tower_brim_width", new ConfigOptionFloat(3.));
+    config.set_deserialize_strict("wipe_tower_wall_type", wall_type);
+    config.set_key_value("wipe_tower_rib_width", new ConfigOptionFloat(8.));
+    config.set_key_value("wipe_tower_extra_rib_length", new ConfigOptionFloat(0.));
+    config.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4}));
+    config.set_key_value("initial_layer_print_height", new ConfigOptionFloat(0.2));
+    config.set_deserialize_strict("timelapse_type", "0");
+    config.set_key_value("enable_wrapping_detection", new ConfigOptionBool(false));
+    config.set_key_value("raft_layers", new ConfigOptionInt(0));
+    config.set_key_value("purge_in_prime_tower", new ConfigOptionBool(false));
+    config.set_key_value("single_extruder_multi_material", new ConfigOptionBool(false));
+    return config;
+}
+
+static std::vector<unsigned int> filaments(size_t count)
+{
+    std::vector<unsigned int> ids(count);
+    std::iota(ids.begin(), ids.end(), 0u);
+    return ids;
+}
+
+// The first `count` filaments on the given planner; Type2 unless a case says otherwise.
+static WipeTowerFootprint estimate(const ConfigBase &config, size_t count, double layer_height, double height, WipeTowerType type = WipeTowerType::Type2)
+{
+    return estimate_wipe_tower_footprint(config, type, filaments(count), layer_height, height);
+}
+
+// What both planners print for a 3 mm brim at 0.4 nozzle and 0.2 first layer (0.4571 mm loops).
+static double printed_brim(double configured, WipeTowerType type)
+{
+    return WipeTower::estimate_brim_real_width(float(configured), 0.4f, 0.2f, type == WipeTowerType::Type2);
+}
+
+TEST_CASE("A rectangle wall tower is sized by the purge volume", "[WipeTowerEstimate]") {
+    const DynamicPrintConfig config = make_config();
+    // Three filaments purge twice per layer; a 5 mm object keeps the stability floor at 5 mm.
+    const WipeTowerFootprint fp = estimate(config, 3, 0.2, 5.);
+    CHECK_THAT(fp.width, WithinAbs(50., 1e-9));
+    CHECK_THAT(fp.depth, WithinAbs(20., 1e-9));
+    CHECK_THAT(fp.height, WithinAbs(5., 1e-9));
+    CHECK_THAT(fp.brim_width, WithinAbs(printed_brim(3., WipeTowerType::Type2), 1e-6));
+    // Thinner layers need more depth for the same volume.
+    CHECK_THAT(estimate(config, 3, 0.1, 5.).depth, WithinAbs(40., 1e-9));
+}
+
+TEST_CASE("Each planner spaces its purge lines by its own option", "[WipeTowerEstimate]") {
+    // Type2 reads wipe_tower_extra_spacing and Type1 prime_tower_infill_gap; neither sees the
+    // other's key. Type2's extra flow cancels out of its depth.
+    DynamicPrintConfig config = make_config();
+    config.set_key_value("wipe_tower_extra_flow", new ConfigOptionPercent(250.));
+    CHECK_THAT(estimate(config, 3, 0.2, 5.).depth, WithinAbs(20., 1e-9));
+    config.set_key_value("wipe_tower_extra_spacing", new ConfigOptionPercent(150.));
+    CHECK_THAT(estimate(config, 3, 0.2, 5.).depth, WithinAbs(30., 1e-9));
+    const double type1_spaced = estimate(config, 3, 0.2, 5., WipeTowerType::Type1).depth;
+    config.set_key_value("prime_tower_infill_gap", new ConfigOptionPercent(150.));
+    CHECK_THAT(estimate(config, 3, 0.2, 5.).depth, WithinAbs(30., 1e-9));
+    // Type1 stacks whole lines behind one 0.5 mm perimeter width, so only the stack scales.
+    CHECK_THAT(estimate(config, 3, 0.2, 5., WipeTowerType::Type1).depth - 0.5, WithinAbs(1.5 * (type1_spaced - 0.5), 1e-6));
+}
+
+TEST_CASE("Type1 sizes the tower from each filament's own prime volume", "[WipeTowerEstimate]") {
+    // The Bambu P1S project of the WipeTower cases: 30 and 45 mm3 in two categories on a 35 mm
+    // tower at 0.21 mm, 150 % gap, is 18.5 mm of stacked blocks (11 mm sharing one category).
+    DynamicPrintConfig config = make_config();
+    config.set_key_value("prime_tower_width", new ConfigOptionFloat(35.));
+    config.set_key_value("prime_tower_infill_gap", new ConfigOptionPercent(150.));
+    config.set_key_value("initial_layer_print_height", new ConfigOptionFloat(0.21));
+    config.set_key_value("filament_prime_volume", new ConfigOptionFloats({30., 45.}));
+    config.set_key_value("filament_adhesiveness_category", new ConfigOptionInts({100, 0}));
+    const std::vector<WipeTower::PurgeEstimate> purges{{30.f, 100}, {45.f, 0}};
+    const double blocks = WipeTower::estimate_tower_blocks_depth(purges, 35.f, 0.21f, 0.4f, 1.5f);
+    REQUIRE_THAT(blocks, WithinAbs(18.5, 0.01));
+    CHECK_THAT(estimate(config, 2, 0.21, 5., WipeTowerType::Type1).depth, WithinAbs(blocks, 1e-4));
+    // The ids pick the volumes, so their order does not matter and a lone filament has no purge.
+    CHECK_THAT(estimate_wipe_tower_footprint(config, WipeTowerType::Type1, {1, 0}, 0.21, 5.).depth, WithinAbs(blocks, 1e-4));
+    CHECK_THAT(estimate(config, 1, 0.21, 5., WipeTowerType::Type1).depth, WithinAbs(0., 1e-9));
+    config.set_key_value("filament_adhesiveness_category", new ConfigOptionInts({0, 0}));
+    CHECK_THAT(estimate(config, 2, 0.21, 5., WipeTowerType::Type1).depth, WithinAbs(11., 0.01));
+    // A rib wall squares the same stack.
+    config.set_deserialize_strict("wipe_tower_wall_type", "rib");
+    const WipeTowerFootprint rib = estimate(config, 2, 0.21, 5., WipeTowerType::Type1);
+    CHECK_THAT(rib.width, WithinAbs(rib.depth, 1e-9));
+    CHECK_THAT(rib.depth, WithinAbs(WipeTower::estimate_rib_tower_bbox_side({{30.f, 0}, {45.f, 0}}, 35.f, 0.21f, 0.4f, 1.5f, 8.f, 0.f, 5.f), 1e-4));
+}
+
+TEST_CASE("A second nozzle adds the ramming of one nozzle change per layer", "[WipeTowerEstimate]") {
+    // Two filaments on two nozzles: the tool order crosses once per layer, and Type1 rams 10 mm
+    // of filament as three 1.0 mm nozzle-change lines (see the WipeTower case).
+    DynamicPrintConfig config = make_config();
+    config.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4, 0.4}));
+    config.set_key_value("filament_change_length", new ConfigOptionFloats({10., 10.}));
+    config.set_key_value("filament_diameter", new ConfigOptionFloats({1.75, 1.75}));
+    config.set_key_value("filament_map", new ConfigOptionInts({1, 1}));
+    const double same_nozzle = estimate(config, 2, 0.2, 5., WipeTowerType::Type1).depth;
+    config.set_key_value("filament_map", new ConfigOptionInts({1, 2}));
+    CHECK_THAT(estimate(config, 2, 0.2, 5., WipeTowerType::Type1).depth - same_nozzle, WithinAbs(3., 1e-4));
+}
+
+TEST_CASE("The tower is sized for the first layer when it is the thinnest", "[WipeTowerEstimate]") {
+    // Both planners reserve the worst layer: a 0.28 mm print with a 0.2 mm first layer needs
+    // the 0.2 mm depth, while a thicker first layer changes nothing.
+    DynamicPrintConfig config = make_config();
+    const double at_thinnest = estimate(config, 3, 0.2, 5.).depth;
+    CHECK_THAT(estimate(config, 3, 0.28, 5.).depth, WithinAbs(at_thinnest, 1e-9));
+    config.set_key_value("initial_layer_print_height", new ConfigOptionFloat(0.3));
+    CHECK(estimate(config, 3, 0.28, 5.).depth < at_thinnest);
+}
+
+TEST_CASE("Object height sets the stability floor and the auto brim", "[WipeTowerEstimate]") {
+    DynamicPrintConfig config = make_config();
+    // Two filaments purge once: 10 mm, lifted to the 20 mm floor of a 100 mm tower.
+    CHECK_THAT(estimate(config, 2, 0.2, 100.).depth, WithinAbs(20., 1e-9));
+    config.set_key_value("prime_tower_brim_width", new ConfigOptionFloat(-1.));
+    const double auto_brim = WipeTower::get_auto_brim_by_height(50.f);
+    CHECK_THAT(estimate(config, 2, 0.2, 50.).brim_width, WithinAbs(printed_brim(auto_brim, WipeTowerType::Type2), 1e-6));
+    CHECK_THAT(estimate(config, 2, 0.2, 50., WipeTowerType::Type1).brim_width, WithinAbs(printed_brim(auto_brim, WipeTowerType::Type1), 1e-6));
+}
+
+TEST_CASE("A single filament only gets a tower when one is printed anyway", "[WipeTowerEstimate]") {
+    DynamicPrintConfig config = make_config();
+    CHECK_THAT(estimate(config, 1, 0.2, 100.).depth, WithinAbs(0., 1e-9));
+    CHECK_THAT(estimate(config, 0, 0.2, 100.).width, WithinAbs(0., 1e-9));
+
+    // Wrapping detection prints a tower on the first layers whatever the filament count: the
+    // Type1 planner's fixed 10 mm, the stability floor otherwise.
+    config.set_key_value("enable_wrapping_detection", new ConfigOptionBool(true));
+    CHECK_THAT(estimate(config, 1, 0.2, 100.).depth, WithinAbs(20., 1e-9));
+    CHECK_THAT(estimate(config, 1, 0.2, 100., WipeTowerType::Type1).depth, WithinAbs(WipeTower::get_wrapping_detection_depth(), 1e-9));
+    config.set_key_value("enable_wrapping_detection", new ConfigOptionBool(false));
+
+    // A raft is not one of them: normalize_fdm_2 clears enable_prime_tower for a plate that
+    // purges one filament unless smooth timelapse or wrapping detection is on, so a raft
+    // alone leaves no tower to reserve for.
+    config.set_key_value("raft_layers", new ConfigOptionInt(3));
+    CHECK_THAT(estimate(config, 1, 0.2, 100.).depth, WithinAbs(0., 1e-9));
+    config.set_key_value("raft_layers", new ConfigOptionInt(0));
+
+    config.set_deserialize_strict("timelapse_type", "1");
+    // A tower printed with no tool change is exactly the planner's idle depth: there is
+    // nothing to purge, and WipeTower2 sizes it at the stability floor.
+    CHECK_THAT(estimate(config, 1, 0.2, 100.).depth, WithinAbs(20., 1e-9));
+    CHECK_THAT(estimate(config, 1, 0.2, 5.).depth, WithinAbs(WipeTower::get_limit_depth_by_height(5.f), 1e-9));
+}
+
+TEST_CASE("A tool change reserves a tower even with nothing to purge", "[WipeTowerEstimate]") {
+    // The purge volumes are configurable down to zero, but the tool changes are still printed
+    // on the tower and both planners still floor it - so the estimate has to floor it too.
+    // Type1 plans per filament and already reserves one; Type2 has only the volume to go on.
+    const double     height = GENERATE(5., 100.);
+    const float      floor  = WipeTower::get_limit_depth_by_height(float(height));
+    const char      *wall   = GENERATE("rectangle", "rib");
+    DynamicPrintConfig config = make_config(wall);
+    config.set_key_value("prime_volume", new ConfigOptionFloat(0.));
+    config.set_key_value("filament_prime_volume", new ConfigOptionFloats({0.}));
+
+    CHECK(estimate(config, 3, 0.2, height, WipeTowerType::Type2).depth >= floor);
+    CHECK(estimate(config, 3, 0.2, height, WipeTowerType::Type1).depth >= floor);
+    // Still nothing for a lone filament with no other reason.
+    CHECK_THAT(estimate(config, 1, 0.2, height, WipeTowerType::Type2).depth, WithinAbs(0., 1e-9));
+    CHECK_THAT(estimate(config, 1, 0.2, height, WipeTowerType::Type1).depth, WithinAbs(0., 1e-9));
+}
+
+TEST_CASE("Both wall types agree on whether there is a tower at all", "[WipeTowerEstimate]") {
+    // A wall type may only change the shape of the tower, never whether one is reserved:
+    // reporting no tower for one that is built collapses the validation hull to a point.
+    const double height = GENERATE(5., 100.);
+    DynamicPrintConfig rect = make_config();
+    DynamicPrintConfig rib  = make_config("rib");
+
+    // No tool change and nothing else that prints a tower - neither wall type reserves one.
+    CHECK_THAT(estimate(rect, 1, 0.2, height).depth, WithinAbs(0., 1e-9));
+    CHECK_THAT(estimate(rib, 1, 0.2, height).depth, WithinAbs(0., 1e-9));
+
+    // Not even on a dual-nozzle printer, where a lone filament still needs no purge.
+    rect.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4, 0.4}));
+    rib.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4, 0.4}));
+    CHECK_THAT(estimate(rect, 1, 0.2, height).depth, WithinAbs(0., 1e-9));
+    CHECK_THAT(estimate(rib, 1, 0.2, height).depth, WithinAbs(0., 1e-9));
+
+    // With a tool change both reserve one, and both respect the stability floor.
+    CHECK(estimate(rect, 2, 0.2, height).depth >= WipeTower::get_limit_depth_by_height(float(height)));
+    CHECK(estimate(rib, 2, 0.2, height).depth >= WipeTower::get_limit_depth_by_height(float(height)));
+}
+
+TEST_CASE("A rib wall squares the tower and caps the rib width", "[WipeTowerEstimate]") {
+    DynamicPrintConfig config = make_config("rib");
+    // sqrt(200 / 0.2) = 31.62 mm square, plus the 8 mm rib bulge along the diagonal.
+    const double body = std::sqrt(1000.);
+    WipeTowerFootprint fp = estimate(config, 3, 0.2, 5.);
+    CHECK_THAT(fp.depth, WithinAbs(8. / std::sqrt(2.) + body, 1e-5));
+    CHECK_THAT(fp.width, WithinAbs(fp.depth, 1e-9));
+    // The extra rib length runs along the diagonal and grows the footprint by its projection.
+    config.set_key_value("wipe_tower_extra_rib_length", new ConfigOptionFloat(4.));
+    CHECK_THAT(estimate(config, 3, 0.2, 5.).depth, WithinAbs((8. + 4.) / std::sqrt(2.) + body, 1e-5));
+    // A tiny tower caps the rib width at half its depth: 5 mm body, 2.5 mm rib.
+    config.set_key_value("wipe_tower_extra_rib_length", new ConfigOptionFloat(0.));
+    config.set_key_value("prime_volume", new ConfigOptionFloat(5.));
+    CHECK_THAT(estimate(config, 2, 0.2, 5.).depth, WithinAbs(2.5 / std::sqrt(2.) + 5., 1e-5));
+}
+
+TEST_CASE("Every wall and tower type is read the same from a preset and a static config", "[WipeTowerEstimate]") {
+    // The GUI, arrange and the CLI pass a DynamicPrintConfig whose enums are
+    // ConfigOptionEnumGeneric; Print passes a static config whose enums are ConfigOptionEnum<T>.
+    // Both the wall type and the planner selection are read by value, so both give the same shape.
+    const char *wall_type  = GENERATE("rectangle", "cone", "rib");
+    const char *tower_type = GENERATE("type1", "type2");
+    DynamicPrintConfig preset = make_config(wall_type);
+    preset.set_deserialize_strict("wipe_tower_type", tower_type);
+    REQUIRE(dynamic_cast<const ConfigOptionEnumGeneric *>(preset.option("wipe_tower_wall_type")) != nullptr);
+
+    FullPrintConfig static_config;
+    static_config.apply(preset, true);
+    REQUIRE(static_config.wipe_tower_wall_type.serialize() == wall_type);
+    REQUIRE(static_config.wipe_tower_type.serialize() == tower_type);
+
+    const WipeTowerType type = resolve_wipe_tower_type(preset);
+    CHECK(type == (std::string(tower_type) == "type1" ? WipeTowerType::Type1 : WipeTowerType::Type2));
+    CHECK(resolve_wipe_tower_type(static_config) == type);
+
+    // Three filaments purge twice per layer on a 5 mm object.
+    const WipeTowerFootprint fp          = estimate(preset, 3, 0.2, 5., type);
+    const WipeTowerFootprint from_static = estimate(static_config, 3, 0.2, 5., type);
+    CHECK(fp.depth > 0.);
+    if (std::string(wall_type) == "rib")
+        CHECK_THAT(fp.width, WithinAbs(fp.depth, 1e-9));
+    else
+        CHECK_THAT(fp.width, WithinAbs(50., 1e-9));
+    CHECK_THAT(from_static.width, WithinAbs(fp.width, 1e-9));
+    CHECK_THAT(from_static.depth, WithinAbs(fp.depth, 1e-9));
+    CHECK_THAT(from_static.brim_width, WithinAbs(fp.brim_width, 1e-9));
+
+    // Smooth timelapse is the other enum the estimate reads: a lone filament gets a tower
+    // through both storages too.
+    preset.set_deserialize_strict("timelapse_type", "1");
+    static_config.apply(preset, true);
+    CHECK(estimate(preset, 1, 0.2, 5., type).depth > 0.);
+    CHECK(estimate(static_config, 1, 0.2, 5., type).depth > 0.);
+}
+
+TEST_CASE("The first-layer outline bulges only for a Type2 cone wall", "[WipeTowerEstimate]") {
+    // Read off a preset-shaped config, whose enums are ConfigOptionEnumGeneric: a cast to
+    // ConfigOptionEnum<T> sees no wall type there and would never find the cone.
+    DynamicPrintConfig config = make_config("cone");
+    config.set_key_value("wipe_tower_cone_angle", new ConfigOptionFloat(25.));
+    REQUIRE(dynamic_cast<const ConfigOptionEnumGeneric *>(config.option("wipe_tower_wall_type")) != nullptr);
+    const Polygon box = Polygon::new_scale({{0., 0.}, {35., 0.}, {35., 20.}, {0., 20.}});
+    auto is_box = [&box](const Polygon &outline) { return diff(Polygons{outline}, Polygons{box}).empty(); };
+
+    // A 25-degree cone on a 100 mm tower has a 22 mm base radius, past the 10 mm half-depth.
+    const Polygon cone = estimate_wipe_tower_first_layer_outline(config, WipeTowerType::Type2, 35., 20., 100.);
+    CHECK(unscaled(get_extents(cone).max.y()) > 20. + 1.);
+    CHECK(diff(Polygons{box}, Polygons{cone}).empty());
+    // Type1 ignores the cone option, and the other wall types have no cone.
+    CHECK(is_box(estimate_wipe_tower_first_layer_outline(config, WipeTowerType::Type1, 35., 20., 100.)));
+    for (const char *wall_type : {"rectangle", "rib"}) {
+        config.set_deserialize_strict("wipe_tower_wall_type", wall_type);
+        CHECK(is_box(estimate_wipe_tower_first_layer_outline(config, WipeTowerType::Type2, 35., 20., 100.)));
+    }
+    // The static config Print holds gives the same outline.
+    config.set_deserialize_strict("wipe_tower_wall_type", "cone");
+    FullPrintConfig static_config;
+    static_config.apply(config, true);
+    const Polygon from_static = estimate_wipe_tower_first_layer_outline(static_config, WipeTowerType::Type2, 35., 20., 100.);
+    CHECK(from_static.points == cone.points);
+}
+
+TEST_CASE("A Bambu Lab printer always gets the Type1 planner", "[WipeTowerEstimate]") {
+    DynamicPrintConfig config = make_config();
+    config.set_deserialize_strict("wipe_tower_type", "type2");
+    config.set_key_value("printer_model", new ConfigOptionString("Bambu Lab X1 Carbon"));
+    CHECK(resolve_wipe_tower_type(config) == WipeTowerType::Type1);
+    config.set_key_value("printer_model", new ConfigOptionString("Voron 2.4"));
+    CHECK(resolve_wipe_tower_type(config) == WipeTowerType::Type2);
+    config.erase("wipe_tower_type");
+    CHECK(resolve_wipe_tower_type(config) == WipeTowerType::Type2);
+}
+
+TEST_CASE("A dual nozzle purges every filament plus the filament change", "[WipeTowerEstimate]") {
+    DynamicPrintConfig config = make_config();
+    config.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4, 0.4}));
+    config.set_key_value("filament_change_length", new ConfigOptionFloats({10., 10.}));
+    config.set_key_value("filament_diameter", new ConfigOptionFloats({1.75, 1.75}));
+    // Two purges of 100 mm3 plus one 10 mm filament change: (200 + 10 * pi * 1.75^2 / 4) / (0.2 * 50).
+    const double change_volume = 10. * PI * 1.75 * 1.75 / 4.;
+    CHECK_THAT(estimate(config, 2, 0.2, 5.).depth, WithinAbs((200. + change_volume) / 10., 1e-9));
+}
+
+TEST_CASE("The shipped defaults size the tower from the flush matrix", "[WipeTowerEstimate]") {
+    // Both keys default to true, so the shipped configuration purges the flush volumes rather
+    // than the prime volume, with no infill gap on top - the flush volumes already hold it.
+    DynamicPrintConfig config = preset_shaped_defaults();
+    REQUIRE(config.opt_bool("purge_in_prime_tower"));
+    REQUIRE(config.opt_bool("single_extruder_multi_material"));
+    config.set_key_value("prime_tower_width", new ConfigOptionFloat(50.));
+    config.set_deserialize_strict("wipe_tower_wall_type", "rectangle");
+    config.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4}));
+
+    const double flush_volume = WipeTower2::estimate_semm_flush_volume(config, 2);
+    const double expected     = std::max(double(WipeTower::get_limit_depth_by_height(5.f)), flush_volume / (0.2 * 50.));
+    CHECK_THAT(estimate(config, 2, 0.2, 5.).depth, WithinAbs(expected, 1e-6));
+}
+
+TEST_CASE("A config missing a tower key falls back to that key's default", "[WipeTowerEstimate]") {
+    // The signature takes any ConfigBase: an absent key must read as its declared default.
+    const DynamicPrintConfig full = make_config();
+    DynamicPrintConfig       partial = full;
+    partial.erase("wipe_tower_extra_spacing");
+    REQUIRE(partial.option("wipe_tower_extra_spacing") == nullptr);
+
+    DynamicPrintConfig defaulted = full;
+    defaulted.set_key_value("wipe_tower_extra_spacing",
+                            print_config_def.get("wipe_tower_extra_spacing")->default_value->clone());
+    CHECK_THAT(estimate(partial, 3, 0.2, 5.).depth, WithinAbs(estimate(defaulted, 3, 0.2, 5.).depth, 1e-9));
+}
diff --git a/tests/slic3rutils/CMakeLists.txt b/tests/slic3rutils/CMakeLists.txt
index 2ab78f56de..3ddacc5a1b 100644
--- a/tests/slic3rutils/CMakeLists.txt
+++ b/tests/slic3rutils/CMakeLists.txt
@@ -55,6 +55,18 @@ elseif (APPLE)
         COMMENT "Copying Python runtime for macOS plugin host API tests"
         VERBATIM
     )
+elseif (FLATPAK)
+    # Same <testdir>/python home as WIN32/APPLE; symlink since /app/libpython
+    # already ships in the flatpak (the test exe links libpython3.12.so from it).
+    add_custom_command(TARGET ${_TEST_NAME}_tests POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E rm -rf
+            "$<TARGET_FILE_DIR:${_TEST_NAME}_tests>/python"
+        COMMAND ${CMAKE_COMMAND} -E create_symlink
+            "${CMAKE_PREFIX_PATH}/libpython"
+            "$<TARGET_FILE_DIR:${_TEST_NAME}_tests>/python"
+        COMMENT "Linking Python runtime for flatpak plugin host API tests"
+        VERBATIM
+    )
 endif()
 
 orcaslicer_discover_tests(${_TEST_NAME}_tests)
diff --git a/tests/test_utils.hpp b/tests/test_utils.hpp
index e3fbbe8fab..0b04e6ad11 100644
--- a/tests/test_utils.hpp
+++ b/tests/test_utils.hpp
@@ -176,4 +176,22 @@ inline void write_debug_stream([[maybe_unused]] const std::string &name, [[maybe
 #endif
 }
 
+// Changes the working directory and restores the previous one on scope exit, including when an
+// assertion throws. It is process wide state shared with every other test.
+class ScopedWorkingDirectory
+{
+public:
+    explicit ScopedWorkingDirectory(const boost::filesystem::path &dir)
+        : m_previous(boost::filesystem::current_path())
+    {
+        boost::filesystem::current_path(dir);
+    }
+    ~ScopedWorkingDirectory() { boost::system::error_code ec; boost::filesystem::current_path(m_previous, ec); }
+    ScopedWorkingDirectory(const ScopedWorkingDirectory &) = delete;
+    ScopedWorkingDirectory &operator=(const ScopedWorkingDirectory &) = delete;
+
+private:
+    boost::filesystem::path m_previous;
+};
+
 #endif // SLIC3R_TEST_UTILS